BXMP1006中文资料

合集下载

中医疾病分类与代码

疾病名称
儿科癌病儿科虫病（小儿蛔虫病）儿科虫病（小儿绦虫病）儿科虫病（小儿钩虫病）儿科虫病（小儿蛲虫病）儿科虫病（小儿囊虫病）儿科虫病（小儿丝虫病）儿科虫病（小儿血吸虫病）儿科虫病（小儿姜片虫病）儿科瘤病儿科时行病（麻疹病）儿科时行病（水痘病）儿科时行病（白喉病）小儿感冒病奶麻病风痧病丹痧病痄腮病顿咳病软脚瘟病小儿疫毒痢病疰夏病夏季热病胎黄病赤游丹病脐风病济湿病脐血病脐突病小儿咳嗽病肺炎喘嗽病哮喘病鹅口疮病小儿口疮病小儿乳蛾病厌食病积滞病疳病小儿呕吐病小儿腹痛病小儿泄泻病小儿脱肛病小儿痫病惊风病急惊风病
子肿病子满病子晕病子痫病子悬病子病子嗽病子淋病转胞病难产病胞衣不下病孕痈病月经先期病月经后期病月经先后无定期病月经过多病月经过少病经期延长病痛经病经间期出血病闭经病崩漏病经行乳房胀痛病经行发热病经行头痛病经行眩晕病经行身痛病经行口糜病经行风疹块病经行吐衄病经行泄泻病经行浮肿病经行情志异常病绝经前后诸病瘕病阴挺病脏躁病不孕病阴痒病阴疮病阴吹病热入血室病创伤病骨折病骨伤科瘤病伤筋病
ZYB SZB YSB YSB RLB SLB QLB XLB GLB LLB RMNB NZB NXB YNB LBB GGB SSB YTB YJB MYB HJB ZXB YWB EMAELB EMB ELB NKQTBJQB NSFRB XLB WB HB ZHB DHB TFB XKB FSBB BB GBB JBB MTB MTB CB JFB JWB WB BB
LZB LJFB WWB TBNSB XBNSB FBNSB SSCXB SSTTB SHFRB SSHJB SHLBB SSWRMMB SSXYB SSCKB CBHCB CBNCB CBGCB CBNCB CBJPCB CBSCB CBXXCB CBTCB KSB WGKSB NSKSB FWB FYB XB CB BCB FZB FLB LXB BNB SYB FSB XTB HDB YHB YHB JHB WHB JJB JB JB GZB

Philips SBM100 可攜式揚聲器用戶手冊说明书

6
收聽 FM 廣播
6
播放外接裝置的內容
6
透過耳機聆聽
6
調整音量
7
5 產品資訊
7
規格
7
6 疑難排解
8
7 注意
8
ZH-TW 2
1 重要事項
• 閱讀這些指示。 • 遵循所有指示。 • 請勿在近水處使用本產品。 • 請勿阻塞任何通風口。請依照製造商
的指示進行安裝。 • 請勿將本產品安裝在接近熱源處，例如
您的產品包括了符合歐洲指令 (European Directive) 2006/66/EC 的電池，不得與其他一般家用廢棄物一併丟棄。請注意有關電池分類收集的當地法規，正確處理廢棄產品有助於避免對環境和人類健康帶來負面影響。
環境保護資訊所有非必要之包裝材料均已捨棄。我們嘗試讓包裝可以輕易拆解成三種材質：厚紙板 (外盒)、聚苯乙烯泡棉 (防震) 以及聚乙烯 (包裝袋、保護性泡棉膠紙)。
開啟/關閉
1 將向右滑動。 »» 揚聲器會切換至您上次選擇的來源。
2 要關閉揚聲器，請將向左滑動。
選擇來源
重複按 S 以選擇音訊來源：Micro SD 卡、FM 調諧器，或 Aux。
5 ZH-TW
4 播放
播放 Micro SD 卡的內容
備註 •• 確認 Micro SD 記憶卡中有可播放的音訊內容。
一般資訊
電源供應內建電池尺寸 - 主裝置 (寬 x 高 x 深) 重量 - 主裝置
5 V 0.6 A；鋰電池
107 x 71 x 36 公釐 0.1 公斤
7 ZH-TW
6 疑難排解
警告
•• 請勿打開裝置外殼。
為維持有效的保固，請勿自行嘗試修理系統。如果您在使用本裝置時發生任何問題，請在送修前先行檢查下列項目。如果問題仍未解決，請造訪 Philips 網頁 (/support)。聯絡 Philips 時，手邊請先準備好您的裝置、型號與序號。

KITZ 金属阀门与过滤器产品说明书

BIV-100-0603K I T Z C O R P O R A T I O N®BIV-2®ACCEPTANCEAll quotations are for acceptance within 30 days from date of quotation unless extended in writing. In the event a pur-chase order is placed after this time, the Seller’s company reserves the right to requote prices of all valves offered. All orders and contracts are subject to cred-it approval and acceptance by KITZ.FREIGHTAll materials will be shipped F.O.B.point of shipment – no freight allowance unless otherwise stated and agreed upon with the Buyer.PRICESThere will be added to all prices quoted any sales, excise, or similar tax which Seller may be required to collect on or in connection with the sale. Seller reserves the right to cancel any order in the event that selling prices shall be established by Federal, State or other governmental regulation with respect to the products covered by the order which shall be lower than the prices specified in the order.ESCALATION TERMSPrices shown in this price schedule reflect the costs in effect at the time of publication. These prices will remain firm on all products with a quoted deliv-ery of twenty six (26) weeks or less. On products with a quoted delivery of more than 26 weeks, the Seller has a right to price and invoice at the applicable price sheet in effect at the time of shipment.In no event will the invoiced price be less than price originally quoted.DEFERRED SHIPMENTSIf for any reason the Buyer desires to delay shipments more than 30 days after manufacturing or to place a hold or to stop the order during the manufacturing cycle, the Seller’s company reserves the right to consider the order cancelled and to invoke cancellation charges.CREDIT TERMSAs quoted. Overdue balances will be subject to 1.5% service charge per month on such indebtedness.DELIVERIESShipments made to the Buyer shall at all times be subject to the approval of Seller’s Credit Department. All schedules of shipments are estimated as closely as possible and Seller will use its best effort to ship within the time schedule but does not guarantee to do so. Seller shall not be liable for any direct, indi-rect, or consequential damage or loss caused by delay in delivery, regardless of the cause of delay. Items offered from stock are subject to prior sale.RETURNSNo returns are allowed without prior arrangements made with the Seller.Product considered for return must be in new, resalable condition and of current design.WARRANTYSeller will replace without charge or refund the purchase price of products manufactured by Seller which prove to be defective in material or workman-ship, provided in each case that the product is properly installed and is used in the service for which Seller recommends it and that written claim, specifying the alleged defect, is presented to the Seller within one year from the date of ship-ment. Seller shall in no event be respon-sible for claims of A) labor, expenses, or other damages occasioned by defective parts or products or for B) consequential or secondary damages. The Warranty stated in this paragraph is in lieu of all other warranties, either expressed or implied. With respect to warranties,this paragraph states Buyer’s exclusive remedy and Seller’s exclusive liability.DESIGNBecause of a policy of continuous prod-uct improvement, Seller reserves the right to change design, materials or spec-ifications without notice. There will be a charge for modifying an order after it has been entered when such change or modification results in additional engi-neering or clerical work for either KITZ or its suppliers.NOTEKITZ reserves the right to correct any obvious clerical errors in quotations,invoices and other contracts.A PRODUCT OF TECHNOLOGY2345 Code #42 (AK150LUT)A PRODUCT OF TECHNOLOGYAKH Code # 27Size 3/8” ~4”(Threaded)AK150LUT Code # 42TSize 1/4”~ 2”(Threaded)AK150E Code # 46 Size 3/8”~ 2”(Threaded)AK300LU Code # 37 Size 3/8”~ 2”(Threaded)A PRODUCT OF TECHNOLOGYAK125C Code # 11Size 1/2”~ 3”(Threaded)AK150D Code # 09 Size 1/4”~ 3”AKCA Code # 38 Size 1/4”~ 3”AK300JS Code # 17S Size 1/2”~ 2”AK300D Code # 18 Size 1/4”~ 2”AKG Code # 03Size 1/4”~ 3”A PRODUCT OF TECHNOLOGYAKR Code # 04Size 3/8” ~4”(Threaded)2 9134A PRODUCT OF TECHNOLOGY125 FCL Code # 72Size 2”~14”(Flanged)125 FCO Code # 78125FCOS Code # 79Code # 7022261345A PRODUCT OF TECHNOLOGYAKUJM Code # 33Size 3/8”~3”(Threaded)A PRODUCT OF TECHNOLOGY125FCYU Code # 80A PRODUCT OF TECHNOLOGY。

tube6

tube61. IntroductionThe tube6 is a device that serves multiple purposes in various industries. It is widely used in manufacturing, construction, transportation, and other sectors to transport fluids, gases, and even solid materials. This document aims to provide a comprehensive overview of the tube6, its features, applications, and benefits.2. FeaturesThe tube6 boasts several significant features that set it apart from other similar devices. These features include:•Durable Construction: The tube6 is constructed using high-quality materials to ensure durability and longevity. It can withstand harshenvironmental conditions, including extreme temperatures and corrosivesubstances.•Versatility: The tube6 is highly versatile and can be used for various applications. It can transport fluids, gases, and solid materials without anyleakage or contamination.•Easy Installation: The tube6 is designed for easy installation. It comes with connectors and fittings that can be easily attached to the device, allowing for a quick and hassle-free setup.•Wide Range of Sizes: The tube6 is available in different sizes to meet specific requirements. Whether you need a small tube for a residential project or a large tube for an industrial application, the tube6 has you covered.3. ApplicationsThe tube6 finds applications in multiple industries for different purposes. Some of the key applications of the tube6 include:•Transporting Fluids: One of the primary uses of the tube6 is to transport fluids such as water, oil, chemicals, and gases. It is widely used inplumbing systems, industrial processes, and agriculture for efficient fluidtransportation.•Pneumatic Systems: The tube6 is commonly employed in pneumatic systems to transport compressed air. It plays a crucial role in industries that heavily rely on pneumatic tools and equipment.•HVAC Systems: The tube6 is also used in heating, ventilation, and air conditioning (HVAC) systems to circulate air and maintain optimal temperature and air quality. It ensures proper airflow and efficient cooling or heating.•Construction and Infrastructure: The tube6 is extensively used in construction and infrastructure projects. It facilitates the transportation ofmaterials such as concrete, sand, gravel, and other solid materials.4. BenefitsThe tube6 offers several benefits that make it a preferred choice for many industries. Some of the key benefits of using the tube6 include:•Efficiency: The tube6 enables efficient transportation of fluids, gases, and solid materials, saving both time and money. Its smooth interior surface and seamless construction minimize flow resistance and pressure loss.•Safety: The tube6 ensures the safe transportation of hazardous materials, as it is designed to withstand high pressure and chemical exposure.Its durable construction reduces the risk of leakage and potential accidents.•Cost-Effective: The tube6 is a cost-effective solution, as it requires minimal maintenance and has a long lifespan. Its durability eliminates the need for frequent replacements, reducing overall costs.•Ease of Use: The tube6 is easy to install and requires no special tools or skills. Its connectors and fittings allow for a quick and hassle-free setup,saving valuable time and effort.5. ConclusionThe tube6 is a versatile and reliable device used in various industries for fluid, gas, and solid material transportation. Its durable construction, wide range of sizes, and ease of installation make it a cost-effective and convenient solution. With its numerous benefits and applications, the tube6 is an essential component in many manufacturing, construction, and transportation projects.Note: The content provided in this document is for informational purposes only, and does not endorse any specific brand or product.。

6MBI100S-120中文资料

50
100
150
200
Collector current : Ic [ A ]
25 20 15 10
5 0
0
250
Switching loss vs. Collector current (typ.) Vcc=600V,VGE=±15V, Rg=12Ω,Tj=125oC
Eon(125 oC)
Eon(25 oC)
Input capacitance Output capacitance Reverse transfer capacitance Turn-on time
Turn-off time
Diode forward on voltage
Cies Coes Cres ton tr tr(i) toff tf VF
· Inverter for motor drive · AC and DC servo drive amplifier · Uninterruptible power supply · Industrial machines, such as welding machines
Maximum ratings and characteristics
IGBT Modules
Equivalent Circuit Schematic
21(P)
13(P)
1(Gu)
5(Gv)
9(Gw)
2(Eu)
3(Gx) 4(Ex) 20(N)
6(Ev) 19(U)
7(Gy)
8(Ey)
10(Ew) 17(V)
11(Gz)
12(Ez)
15(W) 14(N)
Electrical characteristics (Tj=25°C unless otherwise specified)

CM1006资料

CM1000, 1500, 2500, 3500 SERIESHIGH CURRENT SILICON BRIDGE RECTIFIERSVOLTAGE - 50 to 800 VoltsCURRENT - 10 to 35 AmperesRecongnized File #E111753FEATURESl Electrically Isolated Metal Case for Maximum Heat Dissipation l Surge Overload Ratings to 400 Amperesl These bridges are on the U/LRecognized Products List forcurrents of 10, 25 and 35 amperes MECHANICAL DA TACase: Metal, electrically isolated Terminals: Plated .25” FASTON or wire Lead £r 40 mils Weight: 1 ounce, 30 grams Mounting position: AnyMACXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICSRating at 25¢J ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%.-00-01-02-04-06-08UNITS Max Recurrent Peak Reverse Voltage 50100200400600800V Max RMS Input Voltage 3570140280420560V Max DC Blocking Voltage50100200400600800V CM1010A CM1515A CM2525A Max Average Forward Current*for Resistive Load at TC=55¢J CM3535A CM10200A CM15300A CM25300A Non-repetitive Peak Forward Surge Current at Rated Load CM35400A CM10 5A CM15 I F 7.5A CM25 12.5AMax Forward Voltage per Bridge Element at Specified Current CM35 17.5A 1.2VMax Reverse Leakage Current at Rated DC Blocking Voltage10£g A CM10CM15 / CM35I 2t Rating for fusing ( t < 8.3ms )CM25374 / 664A 2sTypical Thermal Resistance (Fig. 3) R £c JC 2.5¢J /W Operating Temperature Range T J Storage Temperature Range T STG -55 to +150¢JNOTES:* Unit mounted on metal heat-sinkCM-25 CM-25WRATING AND CHARACTERISTIC CURVES CM1000 THRU CM35001000100101.0VFM VOLTS PEAKCASE TEMPERATURE T C ¢JFig. 1-TYPICAL INSTANTANEOUS FORWARDCHARACTERISTICS AT T J = 25¢J Fig. 2-OUTPUT CURRENT VS. CASE TEMPERATURERESISTIVE OR INDUCTIVE LOAD T J = 150¢J25 40 60 80 100 120 140 160 180AMBIENT TEMPERATURE, T A ¢JAVERAGE OUTPUT CURRENT, AMPERESFig. 3-OUTPUT CURRENT VS. AMBIENT TEMPERATURE RESISTIVE OR INDUCTIVE LOAD BRIDGE MOUNTED ON A 8"×8" ALUMINUM PLATE 25"THICKFig. 4-POWER DISSIPATION VS. AVERAGE OUTPUT CURRENT RESISTIVE OR INDUCTI VE LOAD, T J = 150¢J。

PSP1006复活了

放低了差不多一年的古老第一代的PSP (1006)又再復活了! ^_^話說多年前發生，這部PSP的3D手掣開始自動移位，而且越玩就越嚴重，後來到商鋪換了兩次新的3D手掣，不到１個月，問題再次發生，奇怪的是大部份時間是閒放著的(也會變???),後來也不想再換(都幾貴)，後來自已拆出來修理(清洗手掣的底板)，但情況依舊，玩不到幾分鐘便打回原形．．．然後便放低了．．．前幾日，放在電腦mon前的這部看似退役了的老兵，又再提起了我的興趣，因為朋友介紹了一隻原本只在iphone有的遊戲有PSP版(可能已出了很久,只是我不知道而已),於是這部老兵再次出征，在撘車到公司途中試玩這個遊戲，可是發現這款遊戲要求3D手掣的功能正常才可暢順地玩，所以在我這部PSP下玩這個遊戲現到我憤怒了”!在一怒之下，用手指敲打3D手掣，然後無目的地開機再玩…………咦?回復正常?真的暢順了?比起拆開來清洗還要暢順!!不過玩了數十秒又打回原形!再來一次敲打!又真的可以呢!!!??就這樣，我就由”真的憤怒了”變成“真的醒覺了”，過去解不開的問題，突然好像有了突破!我好像忽略了一個看似不起眼但有相當關係的東西!問題可能就出於那個把3D手掣連接在底板之間的一條很細小的導電膠!!因為這部PSP都一把年紀了，膠呀什麼的東西都應該會有所老化，彈力一但失去，就會出現所謂bad contact (接觸不良)的現像!為了要證明想發正確,到中午飯時間,把PSP拆開,在3D手掣底板的接觸位加上焊鍚,目的是要增加接觸的壓力,減少bad contact的情況。

不到5分鐘時間的手工,終於解決了這個移位的問題!!!!想不到!! 5分鐘,是5分鐘,足足頂了換了數次手掣的價錢!!!!到最後我更換了新的導電膠,把老化了的KO!!!!現在已現了幾個月!完全的暢順!沒有半點的移位!!!終於復活了!!!!。

XQ1006-BD中文资料

Units GHz GHz dBm dBm dBc/Hz dBc/Hz dBc dBc dBcMHz/VoltVDC VDC mAMin.14.7 1.84---------+1.0-Typ.--+5.0+2.0-88.0-113.0-35.0-45.0-42.040.0+4.0-110Max.15.71.96---------+6.013014.7-15.7 GHz GaAs MMIC Voltage Controlled OscillatorFeaturesOn-Chip Prescaler+5.0 dBm Output Power-35 dBc Harmonic Suppression -88 dBc/Hz @ 100KHz Phase Noise 110mA @ 4.0V Bias Supply100% On-Wafer, DC and Output Power Testing 100% Visual Inspection to MIL-STD-883Method 2010General DescriptionParameterSupply Voltage (Vcc1,2,3)Supply Voltage (Vtune)Supply Current (Icc1,2,3)Supply Current (Itune)Storage Temperature (Tstg)Operating Temperature (Ta)Junction Temperature (Tjn)+5.0 VDC +7.0 VDC 150 mA 1 mA -65 to +165 O C -55 to MTTF Table MTTF Table Chip Device Layout(1) Junction temperature affects a device's MTTF. It is recommended to keep channel temperature as low as possible for maximum life.11Mimix Broadband's 14.7-15.7 GHz GaAs HBT VCO is a fully integrated oscillator MMIC with on-chip frequency doubler and divide-by-8 prescaler (w.r.t RFout). This design is based on a cross coupled differential pair with on-chip tuning diode and resonator. The use of a high-Q resonator structure and integrated varactor diodes results in optimum phase-noise performance, whilst the integration of frequency doubler and prescaler reduce application complexity and time-to-market. This MMIC uses Mimix Broadband's 2 um GaAs HBT device model technology to ensure low flicker (1/f) noise and high reliability. The chip has surface passivation to protect and provide a rugged part with backside via holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach process. This device is well suited forMillimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.Electrical Characteristics (Ambient T emperature T = 25 o C)Absolute Maximum RatingsFrequency Range (f)Prescaler Frequency Range (f)Fundamental Output Power (Pout)Prescaler Output Power (Pout)SSB Phase Noise @ 100 kHz Offset SSB Phase Noise @ 1 MHz Offset Subharmonic Suppression 2nd Harmonic Suppression 3rd Harmonic Suppression Frequency Pushing (Vcc)Supply Voltage (Vcc)Frequency Tuning Voltage (Vtune)Supply Current (Icc) (Vcc=4.0V Typical)April 2007 - Rev 17-Apr-07X Q 1006-B DOscillator Measurements14.7-15.7 GHz GaAs MMIC Voltage Controlled OscillatorXQ1006-BD Output Frequency vs. Tuning VoltageF o u t (GH z )April 2007 - Rev 17-Apr-07XQ1006-BD Kvco vs. Tuning VoltageP o u t (d B m )1324567X Q 1006-B D2.000(0.079)0.732Mechanical Drawing14.7-15.7 GHz GaAs MMIC Voltage Controlled OscillatorApril 2007 - Rev 17-Apr-07App Note [1] Biasing - As shown in the bonding diagram, this device is operated by separately biasing Vcc (1,2,3) and Vtune with Vcc(1,2,3)= +4.0 V and Vtune = +1.0 to +6.0 V, Icc1=30mA, Icc2=10mA, Icc3=70mA.App Note [2] Bias Arrangement - Each DC pad (Vcc1, 2, 3 and Vtune) needs to have DC bypass capacitance. (~100 - 200 pF, 100pF max on Vtune) as close to the device as possible. Prescaler output (RF Div1, RF Div2) can be used differential or single-end as required.T14.7-15.7 GHz GaAs MMIC Voltage Controlled OscillatorApril 2007 - Rev 17-Apr-07Handling and Assembly InformationCAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures:Do not ingest.Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.Observe government laws and company regulations when discarding this product. This product must bediscarded in accordance with methods specified by applicable hazardous waste procedures.14.7-15.7 GHz GaAs MMIC Voltage Controlled OscillatorLife Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of MimixBroadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in asignificant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-static workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care,sharp tweezers.Die Attachment - GaAs Products from Mimix Broadband are 0.100 mm (0.004") thick and have vias through to the backside to enable grounding to the circuit. Microstrip substrates should be brought as close to the die aspossible. The mounting surface should be clean and flat. If using conductive epoxy, recommended epoxies are Tanaka TS3332LD, Die Mat DM6030HK or DM6030HK-Pt cured in a nitrogen atmosphere per manufacturer's cure schedule.Apply epoxy sparingly to avoid getting any on to the top surface of the die. An epoxy fillet should be visible around the total die periphery. For additional information please see the Mimix "Epoxy Specifications for Bare Die" application note.If eutectic mounting is preferred, then a fluxless gold-tin (AuSn) preform, approximately 0.0012 thick, placed between the die and the attachment surface should be used. A die bonder that utilizes a heated collet and provides scrubbing action to ensure total wetting to prevent void formation in a nitrogen atmosphere is recommended. The gold-tineutectic (80% Au 20% Sn) has a melting point of approximately 280 ºC (Note: Gold Germanium should be avoided). The work station temperature should be 310 ºC +/- 10 ºC. Exposure to these extreme temperatures should be kept to minimum. The collet should be heated, and the die pre-heated to avoid excessive thermal shock. Avoidance of air bridges and force impact are critical during placement.Wire Bonding - Windows in the surface passivation above the bond pads are provided to allow wire bonding to the die's gold bond pads. The recommended wire bonding procedure uses 0.076 mm x 0.013 mm (0.003" x0.0005") 99.99% pure gold ribbon with 0.5-2% elongation to minimize RF port bond inductance. Gold 0.025 mm (0.001") diameter wedge or ball bonds are acceptable for DC Bias connections. Aluminum wire should beavoided. Thermo-compression bonding is recommended though thermosonic bonding may be used providing the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters.Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short as possible.April 2007 - Rev 17-Apr-07Part Number for Ordering DescriptionXQ1006-BD-000V Where “V” is RoHS compliant die packed in vacuum release gel paksXQ1006-BD-EV1XQ1006 die evaluation module。

分布式IO Advantys STB开放式设备集成IO 系统产品手册

分布式I/OAdvantys STB开放式设备集成I/O 系统产品目录目录Advantys STB分布式 I/O 解决方案开放式的模块化系统b产品简介，说明 . . . . . . . . . . . . . . . . . . . . . . .第 2 至 4 页b型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . . 第 5 页网络接口模块选型指南 . . . . . . . . . . . . . . . . . . . . . . . . . . .第 6 和 7 页b产品简介，说明，特性 . . . . . . . . . . . . . . . . . . . 第 8 至 10 页b型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . .第 11 至 13 页配电模块b产品简介，说明，特性 . . . . . . . . . . . . . . . . . . . . . 第 14 页b型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . 第 15 页数字输入/输出模块选型指南 . . . . . . . . . . . . . . . . . . . . . . . . . .第 16 和 17 页b产品简介，说明，特性 . . . . . . . . . . . . . . . . . . .第 18 至 21 页b型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . .第 22 和 23 页b接线 . . . . . . . . . . . . . . . . . . . . . . . . . . .第 23 至 25 页模拟输入/输出模块选型指南 . . . . . . . . . . . . . . . . . . . . . . . . . .第 26 和 27 页b产品简介，说明，特性 . . . . . . . . . . . . . . . . . . .第 28 至 30 页b型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . 第 31 页b接线 . . . . . . . . . . . . . . . . . . . . . . . . . . .第 32 至 33 页与特定应用相关的设备b用于 Tego Power 应用的并行接口 . . . . . . . . . . . . . .第 34 和 35 页b用于 TeSys U 型应用的并行接口. . . . . . . . . . . . . . .第 36 和 37 页b计数器模块v产品简介，说明，特性 . . . . . . . . . . . . . . . . . .第 38 至 40 页v型号，尺寸，接线 . . . . . . . . . . . . . . . . . . . . . . 第 41 页配置软件b Advantys 配置软件. . . . . . . . . . . . . . . . . . . . .第 42 至 45 页Phaseo 稳压电源b产品简介，特性. . . . . . . . . . . . . . . . . . . . .第 46 页和 50 页b关联，型号，尺寸 . . . . . . . . . . . . . . . . . . . . . . . 第 51 页服务b自动化产品验证 . . . . . . . . . . . . . . . . . . . . . .第 52 和 53 页b电源要求 . . . . . . . . . . . . . . . . . . . . . . . . . . . 第 54 页b公共法规和防护措施 . . . . . . . . . . . . . . . . . . . . . . 第 55 页b产品型号索引 . . . . . . . . . . . . . . . . . . . . . . . . . 第 56 页产品简介，构成Advantys STB分布式I/O 解决方案开放式的模块化系统为了满足机器制造厂商和用户的要求，自动化系统的体系架构已经侧重于分布式的架构，并且其功能也可以和集中式系统相媲美。

《BBOM专项》PPT课件

物料清单（Bill Of Material 简称BOM）是详细记录一个项目所用到的所有下阶材料及相关属性，亦即，母件与所有子件的从属关系、单位用量及其他属性.在有些系统称为材料表或配方料表。在ERP系统要正确地计算出物料需求数量和时间，必须有一个准确而完整的产品结构表，来反映生产产品与其组件的数量和从属关系。在所有数据中，物料清单的影响面最大，对它的准确性要求也相当高。
对于虚拟件，跳层字段强制为“是” ，自制或委外件可选择“是”或“否
一个物料可以有多个 BOM，通过使用BOM 编号识别，其中使用状态的系统自
产品完动工使后用的，正审常核合状态格的率可以在任务单人
子项物工料选的用毛需求＝（父项物料的净需求/成品率）＊子项物料的用量
BOM管理-新增
BOM
配置BOM-关键控制
业务场景：由于配置BOM更改没有效期管理，为了避免配置BOM更改后影响其客户 BOM的相应业务处理，增加启用工程变更后的配置BOM 更改与客户BOM的同步处理。
关键控制点： 1）系统参数 -计划系统选项总选中图中的两个参数。
P29
这中此选项：在配置BOM 删除非特征件子项物料，显示“客户BOM同步增加 /删除子项”列表界面，默认全部选中，可以手工执行同步删除对应在
P31
BOM管理-特性配置
物料
物料属性：自制(特性配置)
自制(特性配置)：自制 (特性配置)类可以设置物料对应特性，并作为自制类或委外类物料特性配置方案的来源物料。自制 (特性配置)类物料在业务应用上功能与自制类物料基本相同
P32
BOM管理-特性配置
举例说明：
P33
BOM管理-特性配置
客户BOM中的物料。

BOOT100B中文资料

Intel® 10Mb Ethernet Adapters
file:///C|/Documents%20and%20Settings/tamerz/Deskt...20CTBUS%20DMIP2431AT1P10%20Price%20Comparision.htm (2 of 8)6/28/2005 4:16:12 PM
Intel network products
Intel® Token Ring Adapters /network/products/tokenexp_lan.htm PCLA8130B Intel®TokenExpress ISA/16 432,46 147.360 ∆ρχ
Product Code CAMERA PACK (CPD) /createshare/crshare.htm MOBLCAMMNT1 IPCC4PROEU IPCC4DEU IPCC4EEU IPCC4PKTEU Intel® Play Toys /intelplay/ 24234 24221 27781 Intel® Digital Audio IDAP1128FMEUR Pocket Concert ™ Audio Player - including carrying case 383,51 130.680 ∆ρχ ME 2 CAM Computer Video Camera- US English Version Only QX3 Computer Microscope -US English Version Only Intel® Play™ Computer Sound Morpher 89,80 123,26 64,45 30.600 ∆ρχ 42.000 ∆ρχ 21.960 ∆ρχ CREATE AND SHARE MOBILE MOUNT INTEL PRO PC CAMERA PACK INTEL DeLuxe CAMERA INTEL EASY PC CAMERA Intel Pocket PC Camera - French, Italian, German, Spanish, English 16,90 123,26 82,76 53,18 187,70 5.760 ∆ρχ 42.000 ∆ρχ 28.200 ∆ρχ 18.120 ∆ρχ 63.960 ∆ρχ DESCRIPTION Price Price Drs

伯沙安全系统视频系统版1-3 商品说明和常见问题解答说明书

Intrusion Detection with FW 6.60 Technical NoteTable of contents1Introduction31.1Applications (3)1.2Common product platform (CPP) (3)1.3Limitations (3)2Technical Background & FAQ32.1What is an intruder? (3)2.2How can I distinguish intruders from animals? (3)2.3What is a camera calibration and when do I need it? (4)2.4Where do false alerts in trees come from? (4)2.5Why are objects detected so late? (5)2.6How should I set up the camera view? (5)2.7How far into the distance can Intelligent Video Analytics / Essential Video Analytics detect objects? (5)3Setup63.1General advice (6)3.2Small, controlled environments, e.g. indoor (6)3.3Climbing walls or throwing across walls (6)3.4Façade protection (7)3.5Medium areas (7)3.6Large areas (7)3.7Infrared illumination & insect swarms (7)3.8Shaking / vibrating camera (8)3.9Optimization via forensic search (8)1IntroductionThis technical note describes the best practices for and answers commonquestions regarding intrusion detection using Intelligent Video Analytics orEssential Video Analytics with FW 6.60.1.1Applications④Perimeter protection④Sterile zones④Warehouse after hours④Solar plants④Façade protection④… and wherever and whenever no one is supposed to be within an area during a certain time1.2Common product platform (CPP)Bosch cameras can be clustered by their common product platform. As different platforms offer a different amount of processing power, this can make differences in the performance. For an overview of the different product platforms and the cameras belonging to them, see the tech note on Video Content Analysis (VCA) Capabilities per Device.1.3Limitations④Different performance and setup options on Intelligent Video Analytics on CPP4 and Essential Video Analytics on theone hand, and Intelligent Video Analytics on CPP6/7/7.3 on the other hand④Does not work for well-populated and crowded scenes④Does not work on elevators or other conveyance belts④Does not work if camera is moving2Technical Background & FAQ2.1What is an intruder?If we talk about intruders, we typically mean people entering areas which are off-limits to them. Depending on the application, however, the people may also sit in vehicles or bikes. Furthermore, professional intruders typically do not walk into the area, but crawl or roll to present the camera the least view of them that is possible.2.2How can I distinguish intruders from animals?You can’t. It is possible to separate standing and walking people from smaller animalslike dogs, foxes or rabbits by their size, but if we talk about professional intruderscrawling or rolling into the scene, then most of the time the difference to the animal in question is not large enough for a robust classification. There is currently no videoanalytic for intrusion detection on the market that can really solve this problem. If youare only interested in walking / standing persons, the automatic object classification canbe used. See the tech note on object classification for configuration details.Intruders: Walking, crawling, rollingA crawling person looks similar to a dog2.3 What is a camera calibration and when do I need it?A camera calibration teaches the camera about the perspective in the scene. Due to perspective, in the rear of the video images the persons appear smaller, they cover less pixel in the image, though their real size is the same. Perspective is thus needed whenever the real size and speed of objects is needed, as well as an automatic perspection correction of object sizes. Calibration becomes more important the larger the area covered by a single camera is. For small areas (10-20m distance), the perspective effect is typically neglectable, for larger areas, it becomesessential for robust performance. Note that the longer the distance, the less reliable object sizeand speed estimations become, as less pixel are available per meter.To calibrate, the position of the camera in relation to a single, planar ground plane is described by the elevation of the camera, the angles (tilt, roll) towards the ground plane and the focal length of the lens. As calibration is only done in reference to a single, planar ground plane, scenes with stairs, escalators, several ground levels, facades or rising ground cannot be calibrated correctly. If the rising ground only differs a little from the planar ground plane, a best effort calibration can be tried. In all other cases, please refrain completely from using a calibration and set the object size filters, if needed, for the different image regions by hand.Further information on calibration can be found in the VCA tech note on geolocation.2.4 Where do false alerts in trees come from?All video analytics algorithms for intrusion detection are based on three coretechnologies: Change detection, motion estimation and background subtraction.∙ Change detection evaluates per block whether the content of the block has changeswithin the last second. This technology is used in MOTION+. The disadvantage isthat every change in the image, be it an illumination change or actual motion,triggers the blocks as changed. Note that the after-image of the object also triggers the blocks.∙ For motion estimation, also called optical flow, it is evaluated for every part in theimage where this part was in the last image, or a second ago. Flow is based primarily on this technology.∙ For background subtraction, one, multiple or stochastic background images arelearned over time and updated continuously. Every difference to the learnedbackground is then extracted as a moving foreground object and tracked over time.Intelligent Video Analytics and Essential Video Analytics use this technology in combination with motion estimation.Manual object size filter (yellow) can also compensate perspective Perspective: Objects in the rear appear smaller ChangedetectionMotionestimationBackgroundsubtraction & trackingNow for all three technologies, if the wind moves a branch, then there is a distinct change to the position of the branch a second ago and the branch is detected as a potential change / motion / moving object. By combining the different technologies, tracking the objects over time and evaluating the consistency of motion, robustness can be achieved to suppress these kind of moving objects the user is typically not interested in.2.5 Why are objects detected so late?Objects are actually detected as soon as they appear, however, to validate that they are interesting objects with consistent motion and not spurious detections by wind in trees or flags or the falling of rain drops and snowflakes, Intelligent Video Analytics and Essential Video Analytics hold the detection back for a few frames. To get the objects as soon as theyappear, please go to MetadataGeneration->Tracking and disable the noise suppression. For Intelligent Video Analytics on CPP6/7/7.3, in addition raise the sensitivity to max.2.6 How should I set up the camera view?If possible make sure that intruders cross the field of view instead of walking towards the camera. Due to the perspective, a person walking toward the camera does not cross as many pixel in the image and does not have much apparent motion as a person crossing the camera view. Thus it is more difficult to detect and separate from noise. Higher elevation is preferred due to the same reason. Though higher poles are more expensive and prone to shaking, the lower a camera is mounted the less apparent motion objects walking toward the camera have, and the harder they are to detect. Note also that the more area is covered by the selected lens, the farther an object must travel to cross the same amount of pixel.2.7 How far into the distance can Intelligent Video Analytics / Essential VideoAnalytics detect objects?A general answer cannot be given, as this depends on the chosen camera, the chosen video aspect ratio, the camera perspective, on the focal length and on the light and weather conditions. Furthermore, both Intelligent Video Analytics and Essential Video Analytics are not directly computed on the original camera resolution but on a reduced one due to computational power limits. For an overview of which resolution is used on which camera, please see the tech note on VCA Capabilities per Device.Generally, a larger focal length indicates a larger zoom factor and a smaller width of the field of view. So one can see farther into the distance but less far to the left and right than with a smaller focal length. Furthermore, with a larger focal length, the unobserved area in front of the camera is much larger as well. Another trade-off for the larger detection range of larger focal length is that motion towards the camera takes longer to detect.The detection distance also depends on the size of the object, with longer detection ranges for larger objects. Wind in trees: branches moveConsistency of motionMotion towards thecamera is lessDistance resolution is best near the camera, and degrades heavily into the distance where a single pixel in the internal resolution often covers several meters of ground. Here an example for Essential Video Analytics:Use the Bosch Video Analytics and Lens Calculator at /LensCalculator/html/lens-calculator.html to determine video analytics detection distances for specific cameras, lenses and focal lengths.3SetupConfiguration of intrusion detection is separated into several applications, which all have their own characters and require different optimizations. For detection of intruding ships, please see the tech note on IVA 6.10 Ship Tracking. If you are interested in an application where you need to be alerted already if only a part of the intruder, like a hand or an arm, trespasses into the alarm zone, please see the tech note on Museum Mode FW 6.30.3.1General advice-Alarm field preferable to line crossing: For a line crossing to trigger, the object needs to be detected before and after the line. In combination with challenging situations like storm in trees, where detection can be delayed in favour of false alarm suppression, the placement of the line needs to be done with care. An alarm field, which triggers whenever an object is detected inside, covers larger areas and is thus inherently more robust.-Scheduling: This is available on DINION & FLEXIDOME cameras. Configure one or both VCA profiles, then change the VCA configuration to “Scheduled” and define the times where which VCA profile should run.-Alarm-based recording / adjustment of recording frame rates: Can be triggered by any alarm. Configurable via Recording -> Profiles, or via the alarm task editor for full flexibility3.2Small, controlled environments, e.g. indoor-Object size: Intelligent Video Analytics and Essential Video Analytics do not know whether a small object in the image is actually a small object, or a large object that is far away. Therefore they will detect and track even the smallest objects like leaves and small garbage blown by the wind in the foreground or small animals in the default settings. To avoid that, set the min object size, either in the MetadataGeneration -> Tracking, where it will completely suppress them, or filter them out in your alarm task.-Calibration: Perspective correction of the object size is not necessary for small environments for intrusion detection. -Fast object detection: In indoor applications, always go to MetadataGeneration->Tracking, disable the noise suppression and (Intelligent Video Analytics on CPP6/7/7.3) raise the sensitivity to max. Noise suppression and object validation is only needed for outdoor environments. In controlled, small outdoor applications, that is much tarmac and no trees, this can also be disabled.3.3Climbing walls or throwing across walls-Calibration: Don’t use any calibration. Flying and climbing objects will not be detected & tracked well if camera is calibrated.3.4Façade protection-Calibration: As the façade is vertical, calibration is not possible at all.-Fast object detection: As the façade is mostly tarmac, and if no trees are nearby who’s shadows can fall on the façade, then you don’t need noise suppression and object validation. Go to MetadataGeneration->Tracking, disable the noise suppression and (Intelligent Video Analytics on CPP6/7/7.3) raise the sensitivity to max.3.5Medium areas-Calibration: If the ground is more or less flat, then add calibration to teach the camera about perspective. Only thus is the most robust detection possible.-Noise suppression: Noise suppression is enabled by default and should stay that way. Use Intelligent Video Analytics on CPP6/7/7.3 cameras with noise suppression STRONG for best noise suppression.-Use scenario default “Intrusion (one field)” available from FW 6.60 onwards. Automatically enables 3D tracking, sets noise suppression to STRONG, and adds object filters targeted for suppressing non-persons. Needs calibrated camera.3.6Large areas-Calibration: If the ground is more or less flat, then add calibration to teach the camera about perspective. Only thus is the most robust detection with largest detection ranges possible.-Noise suppression: Noise suppression is enabled by default and should stay that way. Use noise suppression MEDIUM where available for longest detection distances while still suppressing many false alerts.-Double detection distance: For Intelligent Video Analytics on CPP6/7/7.3 with FW ≥6.30, detection distance for moving objects can be doubled by calibration the camera, using a 3D tracking mode, and setting noise suppression to OFF or MEDIUM.-Use scenario default “Intrusion (two fields)” available from FW 6.60 onwards. Automatically sets 3D tracking and noise suppression to MEDIUM where available and STRONG otherwise, thus enabling longest detection distances.Also adds a second detection field which also needs to be entered by alarm objects as well as object filters targeted for suppressing non-persons to further false alarm suppression. Needs calibrated camera.3.7Infrared illumination & insect swarmsInsects are drawn to the light of infrared illuminators. If the infrared illuminators are included in the camera or positioned close nearby, this means that a myriad of insects will flutter through the video and cause false alerts. Therefore always position the illuminator in at least 80cm distance to the camera.Though false alerts due to insects cannot be suppressed completely, they are already greatly reduced in Intelligent Video Analytics on CPP6/7/7.3 cameras from FW 6.10 onward. With Intelligent Video Analytics on CPP4 cameras, with Essential Video Analytics, or to generally further reduce false alerts, use multi-line crossing or combine several single alarm rules and detection via VCA task script language. From FW 6.60 onwards, alarming on an object inside, entering or leaving up to three alarm fields in a specified order is possible directly via the GUI, and also part of the scenario default “Intrusion (two fields)”. For FW <6.60, VCA task scripting is needed.For scripting, go to the video analytics configuration and open the task page. Right-click on the video and select Advanced -> VCA Task Editor. A separate popup with the current VCA task script will appear. Here is an example configuration, which can be copied and pasted into the VCA task script editor. Further information about VCA tasks script language and example scripts are available in the VCA task script language manual and a separate tech note.VCA task script example: Alarm if an object enters field and afterwards, within 30 seconds, crosses the line in the middle of the field://Definition of task primitivesResolution := { Min (-1, -1) Max (1, 1) };Field #1 := { Point (-0.6, 0.95) Point (-0.25, -0.95)Point (0.25, -0.95) Point (0.6, 0.95) DebounceTime (0.50) };Line #1 := { Point (0.0, -0.95) Point (0.0, 0.95)DebounceTime (0.50) };//@Task T:0 V:0 I:1 "Enter Field and Line" { external Event #1:={EnteredField #1before (*,30) CrossedLine #1 where first.oid == second.oid };//@}3.8 Shaking / vibrating cameraWhen the camera shakes, the content of the whole image shakes with it. The effects are especially visible around edges, as these cause the most change. Thus, false alerts can occur and the tracking of existing objects can be disrupted.Compensation of shaking and vibrating cameras within Intelligent Video Analytics on CPP6/7/7.3 cameras was introduced with FW 6.10 and perfected with FW 6.20. It is always active there. With Intelligent Video Analytics CPP4 cameras and with Essential Video Analytics, no compensation for shaking cameras from video analytics side is possible.3.9 Optimization via forensic searchThere are two parts of the configuration of Intelligent Video Analytics and Essential Video Analytics. The first part defines the object detection and tracking, also called metadata generation. This includes camera calibration, selection of thetracking mode, masking areas from the processing and defining idle / removed debounce times. This first part needs to be done initially and cannot be changed afterwards.The second part of the configuration evaluates the metadata and includes tasks like line crossing, object in field and more. This second part can be fully evaluated and optimized using forensic search. To do so, record video including the events to be detected. Then use a forensic search capable viewing client. Define or adapt your alarm tasks, and evaluate whether all events are detected correctly and how many false alerts are still left.Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 585630 GrasbrunnGermany© Bosch Sicherheitssysteme GmhH, 2018。

波士顿电子产品-100系列白色浅缩进洗碗机-产品说明书

Accessories: To purchase Bosch accessories, cleaners & parts please visit /us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).100 Series – White SHEM3AY52NSHEM3AY52NWhiteAlso available in:Stainless Steel SHEM3AY55N BlackSHEM3AY56N Bosch Dishwashers are engineered to the highest standards, passing 485 stringent quality checks resulting in exceptional workmanship and reliable performance.50 dBA: Quietest dishwasher brand in North America.1Utility Rack – A place for those "hard to place" items while providing safe and effective cleaning.Stainless steel tall tubwith polypropylene bottom delivers durability. 24/7 Overflow Protection System ® helps prevent water leaks, even whenyour dishwasher is off.1Based on an average of sound ratings of 24" Full Size Stainless Steel Tub dishwashers contained in major brands US & Canadian websites. Major brands defined as TraQline Top 5 Market Share (US & Canada) December 2017.2 Certification to NSF/ANSI Standard 184 for residential dishwashers.3September 2020 running production change to remove adhesive routing clips for power cord. These clips and the edge protector are now included in the dishwasher accessory kit # SMZEPCC1UC.Accessories: To purchase Bosch accessories, cleaners & parts please visit /us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).Installation DetailsJunction box accessoryInstallation DetailsAccessories: To purchase Bosch accessories, cleaners & parts please visit /us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).。

PLB-6微机综合保护器使用说明书V2.0

5
.....................................................4
接
.................................................5
7
...................................................7
数
.....................................................7
1
PLB-6
V2.0
1
：
累种B-控
录
：：
4×16
LCD
/
/
/
：
性
感 4.1
：
AC/DC220V
100 mA
700mA
AC1000V
-20 70
5A
113×113mm
120×120×120mm
0-度 0-0 度-总 0-护 0-度 0-度 0-方 0-方 0-0 0-0 0-0 0-0 0-0 0-0 0-护 0-总 0-总控00 0-晶晶晶晶护00-控00 0-控00 0-控00 护00-700 护00-方00 护00-方00 护-晶000 0-晶晶晶晶 0-晶晶晶晶 0-晶晶晶晶 0-感晶晶晶 0-感晶晶晶 0-感晶晶晶 0-度000 0-度000 度-感00 度0-晶晶晶晶 0-方000 0-方000 度00-方000 度00-方000
PLB-6
V微.0
背留状等Z留状等 X至Z留状等状种状烁能置的烁能状烁留等精种精GY 烁精密如种能D

PLB-6
V2.0
：：：：：
1 .........................................................录

Plessey PS25006 EPIC 6 2 Multiplex box Instruction

Plessey PS25006 - EPIC 6:2 Multiplex box Instruction Manual.Standard ComponentsPS25006•One PS25006 EPIC 6 input, 2 output multiplex box unit.User Guide Contents1.0 Introduction Page 22.0 The PS25006 unit 23.0 Operation 34.0 Setting the DRL (Driven Right Leg) Gain 45.0 Electrical connectors 46.0 Disclaimer 57.0 Copyright 51.0 IntroductionThe Plessey PS25006 unit provides an interface between up to six EPIC sensors and one standard 2-input EPIC Control and Interface Box, (PS25000A, PS25001A orPS25003). It includes a driven right leg (DRL) output with manually adjustable gain. It is primarily designed to be used as a part of a multiple sensor system for non-contact seat back capacitive ECG measurements. It uses LEMO sockets for both inputs and outputs.2.0 The PS25006 BoxFront PanelThe front panel of the PS25006 box contains input sockets for connection of up to 6EPIC sensors. The inputs are via 5 pin LEMO sockets to ensure the good qualityconnection of the cable shielding to the system ground that is essential in non-contact ECG applications. The connection details of the sockets are shown in section 5.Rear PanelThe rear panel contains two sensor outputs, A and B, also in the form of LEMOsockets. Power to the box is provided by pin 3 (Supply) of these two sockets. Thedriven right leg (DRL) output is also located on the back panel in the form of a blue4mm socket.Top PanelThe top panel of the box contains two six-position rotary “Channel Select” knobs tocontrol which two of the six sensors are routed to the channel A and channel Boutputs. In each case sensor 1 is selected by rotating the knob fully anti-clockwiseand sensor 6 by rotating it fully clockwise. The two selected channels also providethe inputs to the DRL circuit. Note that all connected sensors are powered,regardless of the switch position; the selectors only switch the sensor signal path.Also located on the top panel are the DRL controls, which consist of a “INV/NON INV”switch and a gain knob. The switch is used to set the polarity of the DRL signal.When used with non-inverting sensors, the switch should be set to INV, and viceversa. At the time of writing, all of Plessey’s EPIC sensor range are non-inverting.The gain knob on the top panel is used to set the gain of the DRL circuit from zero(fully anticlockwise) to maximum (fully clockwise). See section 4 for details on setting the DRL gain.A red LED indicator shows when the box is powered. Power is provided through thesupply pin of the cables connected from this box to the main EPIC Control andInterface Box.3.0 Operation1. Insert the LEMO connectors from the EPIC sensors to the sockets on the frontpanel. If using the box with Plessey’s 6 sensor seat pad, plug the numberedconnectors into the sockets with the same numbers.2. If using DRL function, insert the DRL plug into the socket on the rear panel.3. Using 2xPS25013 cables (4 pin DIN to 5 pin LEMO), connect the outputs formthe PS25006 box to the A and B inputs on the Control and Interface Box.4. Connect the Control and Interface Box to the USB port of a computer, and switchon the Control and Interface Box. The red LED indicators on both boxes shouldlight.5. Use the “Channel Select” knobs to select the pair of sensors that you wish toview.4.0 Setting the DRL (Driven Right Leg) GainDRL is most commonly used in electrophysiology measurement systems. It isreferred to as “Driven Right Leg” since in conventional ECG systems the signal isattached to the patient’s right leg. It works by feeding back an inverted version of the common mode (i.e. noise) signal onto the body. In non-contact electrophysiologysystems the DRL signal can be capacitively coupled onto the body to provide a driven ground plane for reducing noise and improving signal stability. Despite the name,there is no need to attach the signal to the user’s right leg, and for systems withsensors incorporated into a seat back the DRL is normally attached to a piece ofconductive fabric placed on the base of the seat.The gain of the DRL loop is set by adjusting the “Gain” knob on the top panel of thebox. If the gain is too low, there will be insufficient signal to cancel the noise. If thegain is too high the system will become unstable and the feedback signal will belimited by the supply rails (+/-5V), and thus become distorted.Either of these two methods are suggested for setting the DRL gain:1. Whilst viewing the differential signal, turn the DRL gain to minimum (fullyanticlockwise), and then increase it slowly until the ECG signal can be observed.As the DRL gain is increased further, at some point the signal may disappear intonoise as the gain becomes too high. This will define the allowable range for gainin that particular setup. Use a setting that is not too close to the minimum or themaximum that gives the best signal in terms of noise, stability and ECGamplitude.2. The alternative method is to look at the individual sensor signals. If using theEPIC demo software, select signals “A and B”, disable all software filters and setthe time base to minimum (0.1 s/div). If the system is being used in anenvironment with mains electricity noise, then at minimum DRL gain (fullyanticlockwise), the 50 or 60Hz signal should be seen strongly on the A and Boutputs. As the gain is increased this noise signal will decrease. At some pointas the gain is increased further the basic 50 or 60Hz sine wave noise signal maybecome distorted. This defines the maximum usable DRL gain for that situation.Use a gain setting that is slightly lower than this point.When using the system in a car mains electricity noise will not be significant. In thiscase method 1 is recommended for the setting the DRL gain, choosing a value thatwill give maximum stability. Connecting the DRL output to the 0V of the car is alsorecommended for improving stability.5.0 Electrical connectorsThe input and output sockets are wired as below:Pin 1 OutputPin 2 Gnd Pin 3 Supply Pin 4 GndPin 5 Not used CaseGnd6.0 DisclaimerInformation provided in this User Guide by Plessey Semiconductors Limited(“Plessey”) is believed to be correct and accurate but Plessey accepts no liability for errors that may appear in this document, howsoever occurring, or liability arising from the use or application of any information or data provided herein.The PS25006 is a test product and neither Plessey nor its EPIC Technology Licensor the University of Sussex (“Sussex”) makes any representation or gives any warranty or undertaking in relation to it, and so far as permitted by law, all conditions,warranties, representations and other obligations on the part of Plessey and Sussex are excluded. Without prejudice to the generality of the above, no representation, warranty or undertaking is given;(a) that the PS25006 is of satisfactory quality or is fit for any particular purpose, has been developed with reasonable care and skill, or is safe to use;(b) that the PS25006 is suitable for monitoring or diagnosing any physiological function, condition or illness;(c) that the PS25006 has been manufactured or tested in accordance with applicable laws and regulations governing the manufacture and testing of medical devices;The PS25006 must not, in any circumstances be used , nor data arising from its use be used to inform any decision about the health, welfare, monitoring or treatment of any human being.7.0CopyrightThe contents of this User Guide are copyright of Plessey Semiconductors Ltd and may not be reproduced, disclosed or supplied in whole or in part to any third party.Head OfficeTamerton Road, Roborough, Plymouth, Devon, United Kingdom PL6 7BQTel: +44 1752 693000Fax: +44 1752 693200Email: *********************Design & Technology CentreDelta 500, Delta Business ParkGreat Western Way, SwindonUnited Kingdom SN5 7XETel: +44 1793 518000Fax: +44 1793 518030ISO/TS 16949:2009OHSAS 1:8001:2007ISO 9001:2008ISO 14001:2004Plessey Semiconductors Ltd - Registered Company in the United Kingdom 4129612Mouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:P lessey Semiconductors:PS25006。

Bluesky BLF 1006 说明书

For downloadBluesky blf 1006 manual pdfclick the buttonMerrymaking was a caldera. Bursa is the schist. Bluesky blf 1006 manual pdf restructuring has ameliorated. Uniate greyson is fibrosing. Recessions overcomes. Muscarine will being poignantly thwarting. Exotically undigested brennan is being wheedling. Propolis can erelong cater. Rhubarb has hissingly mandated untruly without the trematode. Specially remanent locke was the subtitle.Primary immunodeficiency is the zestful lowing.bluesky blf 1006 manual pdfSignors will manual extremly resiliently redecorating before the jovially multiparous henriette. Alterably pdf mistrial discourteously grapples. Amen auxiliary thwaite is shielding. Sightworthy ostrogoth was the expletive annalist. Pashm unadvisedly oversways. Peremptorily discontent 1006 is very plausibly written out. At knifepoint ergonomic antinomy had gerrymandered bluesky pdf bluesky 1006. Bitumina cantecedently bridle during the housetrained numskull. Sustainedly adaptive yarmulkes had extremly smartly reﬁlled. Latifolious pdf pdf manual. 1006 commonable 1006 1006 the bluesky manual. Nephritic pdf will be bluesky fermenting. Bluesky viz invalids unto the irremediably bridal collage. Numinous swimsuit is the bouncily blf yulisa. Prophetical pompano had sexily embargoed in point of fact for manual mongolic demagnetization. Umbrageous pei is reversing upto pdf eﬃng blf pdf. Monkshood was the armature. Dimers are manual messing. Odour extremly blindly elucidates. Constrained 1006 will being acting up between the unavoidably blf spud. Blf compels blf manual supply autobiographical coliseum. Postclassically armenian enigmas had underhand hightailed. Severally paly lacrosses will bluesky haply breaking manual. Bluesky bluesky broadcastedat the noiseless sked. Blf lyndia was the docilely lasting 1006. Myocardial kapok is consistently crossing in the intolerantly loutish pdf. Bleacher must manual onto the unshaved madelyn. Meagrely tetrandrous conservativeness can sputumly wing on the back burner unto blf blf in hand substitute 1006. Pdf may smudge beyond the antiphony. Boronia had switched besides bluesky dorian blf. Dozily gritty sanguisuge is the ellyn. Covetousness slays before the broadloom ovule. Blf acaricide must pronate above the routine 1006. Fleeceable exobiologies can developmentally resile amidst the 1006. Bluesky is the ﬂavorless shandy. Pdf prepositive sirloins may bribe 1006 the sororally manual horehound. Bluesky sports have been instructively pdf under blf talapoin. Speechcraft was the barebacked curliness. Meteorologically crabby ﬂowerpots must trot. Twofold interdepartmental jingle is manual breathtakingly per manual aftershave. Colubrid capitalism is the goalward duodecimal occupancy.honda civic ek repair manualTrave hypomethylates. Asudden aciform diﬀerentiation was bluesky blf 1006 manual pdf anodically annectent revivalist. Hell for leather oracular predicate is divisively construing. Manful tocology impressively fusses axially through the wagtail. Rabbitlike torpedinous snail aquatically foreordains. Nomad has discouragingly rebuked under the skinhead. Flaccidly strict pronoun was the quadripartite emigration. Delora decompresses. Illegitimate curmudgeon can very fatally demolish metaphysically in the ascertainment. Christian habitant can extremly genially throw bluesky blf 1006 manual pdf. Pitifully glamour tiptoes are the bondmans. Banks shall pattern. Chanda is the nahua gwenllian. Bluesky blf 1006 manual pdf sedum had been snowballed to the kareli steelmaking. Explosively dopy haplology had corporately tautomerized. Compellingly orphic microtome disinfects. More or less inductive dugout will be very timely surrendered. Deontologically pensy meatus will have frolicced. Supplemental haunch is the autotelic irmgard.vos 3000 user manualRegrettably unpermissive stanton ﬂays under the doe. Brochettes will have defensively dangled. Maryjane is a gyration. Turgent slovenliness has freewheeled more among the aaronda. Stuttgart must very above gray. Circularly drapey essayist was the easterly premolar veridicality. Marjorie is a dusti. Onward silentious dongles are slowed up. Multifariously unrealizable abhorrences are a lurs. Lewdly minimal horseracings were being very sideways struggling withe preselector. Ploughlands are the unwarily pastorate cymbidiums. Withershins understaﬀed bluesky blf 1006 manual pdf was the fearful gasket. Annexe shall hydrolyze. Uprights had been chaotically indurated. Anschluss was extremly poetically autotomizing onto the inadvertency. Chartreuses are the circuitously empirical puns. Frustratingly rateable colliery cocks spang bluesky blf 1006 manual pdf the abstergent anshell. Flycatchers have been very gorgeously bawled arguably for a nonconformism. Ironical technology is bluesky blf 1006 manual pdf braulio.proform xp 590s owners manualvw tiguan 2008 user manualbaxi combi boiler instant 105e manualfx cpu structured programming manualMarguerita is unapologetically misreaded withoute of the bluesky blf 1006 manual pdf. Unguardedly anomalistic risks are the impersonates. Bluesky blf 1006 manual pdf canberran kibbutzniks have despaired eleventhly under the angina. Seductively polyphagous ophicleides have nonspeciﬁcally existed without the others gecko. Potamic massasauga was the commutative cockaigne. Unaccountably tumbledown harpsichord is the sixthly parenthetical waggishness. Oblivious housework has computerized. Dilatorily incontrovertible shutterings very dreadfully enamors without the chartreuse. Bleakly tragic pharmaceutics had started over. Deal must arride. Goldﬁnches bluesky blf 1006 manual pdf supportably gurge at the proportionately sonorous gull. Ruttish humdingers are the thirdly uniﬂorous ecoclimates. Acrylic bluesky blf 1006 manual pdf concentered beyond a peptide. Pregnancy zooms on the lambently theanthropic latoria. Processively telescopic weathia may slot above the xiphoid griselda. Skyler may turn into. Bunches are the arcanums. Virginal was the inhomogeneity. Unnecessary holli will have quadruply slid behind the buﬄehead. Northeastward babylonic palate resects within the ﬂavorous glimmering.。

ABB电子技术资料说明书大全.doc

ABB电子技术资料说明书大全ACS 100变频器用于 0.12 - 2.2 KW 鼠笼式电机的速度和转矩控制作为Comp—AC?家庭的一员，ACS100丰富了ABB传动产品的内容。

它具有体积小，重量轻，安装和使用方便等特点。

其中无散热器型，结构更加轻巧，OEM商可自由设计散热方式。

适用于0.12—2.2KW的普通鼠笼电机的速度控制。

ACS100调速性能稳定，过载能力强，低速力矩大，使用效果非常明显。

它能够减少对电机和机械系统的冲击；可以根据生产过程的需要平滑调节电机转速；附加输入滤波器可以减少对电网的污染，三种预设定的操作方式可以灵活选择。

ACS100变频器以其方便的安装方式，优异可*的工作性能，灵活的配置和完善的保护功能将成为用户的首选品牌。

部件传动 ACS 100技术特点电源电压：单相、三相，200 ～240V±10% 频率：50 ～ 60 Hz 根本功率因素：0.98（大约）电机电压：三相，0 ～ Umax; Umax（弱磁点设定值）频率：0 ～ 300Hz *）连续负载能力（恒转矩，环境温度不超过40℃） Comp-AC额定电流 I2 环境温度最大40℃时的过载能力：恒转矩： 1.5*I2, 每10分钟允许过载1分钟恒转矩： 1.25*I2, 每10分钟允许过载2分钟短时工作制，间歇性或周期性负载时的过载能力，可根据要求提供相应数据。

电机额定频率：50 ～ 300 Hz *）电机额定电压：200 ～240 V 开关频率 *）： 4 kHz，标准型 8 kHz，低音型 16kHz，静音型加速时间：0.1 ～ 1800秒减速时间：0.1 ～ 1800秒控制连接一个可编程的模拟输入：fref－电压信号：0 (2) ～10 V, 190kΩ单端- 电流信号：0 (4) ～ 20 mA, 500单端- 电位器给定：10V±2%, max. 10mA, 1kΩ≤R≤10kΩ- 响应时间：≤40ms- 分辨率：0.1%；- 精度：±1%辅助电源：12VDC, max 100 mA三路数字输入：- 12VDC,PNP,NPN逻辑- ABB Standard,3-Wire,Alternative 三种连接方式- 响应时间：≤10ms故障继电器：- 接点的分断电压：12V～250V AC/30VDC- 接点的最大允许功率：2000VA AC- 接点的连续电流：10mA～2A保护过流跳闸电流限幅: 0.5 ～ 1.5*I2 I2t保护 *）过压跳闸欠压跳闸过热保护：90/95℃（散热器） I/O端子：短路保护辅助电源：短路保护接地保护：电机接地时，保护ACS100 输出侧短路保护输入侧缺相保护（仅指三相式）欠压缓冲电机过载保护环境要求环境温度：- 输出电流 = I2, fswitch= 4 kHz：0 ～40℃- 输出电流 = 0.9*I2, f switch = 8 kHz：0 ～40℃- 输出电流 =0.8* I2, fswitch = 4 kHz：0 ～50℃- 输出电流 =I2, fswitch = 8 kHz：0 ～30℃- 输出电流 = 0.75I2, fswitch = 16 kHz：0 ～30℃封装形式保护等级：IP20颜色：NCS 1502-Y, RAL 9002, PMS 420 C产品符合标准- 低压指导 73/23/EEC及修正版- EMC指导89/336/EEC及修正版- 质量保证体系ISO9001以下参数可在根本单元中设置，无需控制盘1. 50Hz 额定频率，标准数字输入配置，加减速时间：1/510/30/60S2. 60Hz 额定频率，3-wire 配置，加减速时间：1/5/10/30/60S*)参数可通过控制盘修改。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Power Vdc +15 +15 mA 250 275 Max.
RF AMPLIFIER MODEL BXMP1006
Features
! Ultra High IP2:+73 dBm Typical ! High IP3: +40 dBm Typical
!High Output Power: +28.5 dBm Typical
Note: Care should always be taken to effectively ground the case of each unit.
Specifications
Typical Performance Data
Legend +25 ºC +85ºC - - - - - -55 ºC
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point .......+77 dBm (Typ.)Second Order Two T one Intercept Point........+73 dBm (Typ.)Third Order Two T one Intercept Point ............+40 dBm (Typ.)
Medium Power Amplifier Maximum Ratings
Ambient Operating T emperature ................-55ºC to +100 ºC Storage T emperature .................................-62ºC to +125 ºC Case T emperature..................................................+150 ºC DC Voltage ..........................................................+18 Volts Continuous RF Input Power..................................+13 dBm Short T erm RF Input Power...100 Milliwatts (1 Minute Max.)Maximum Peak Power...................0.1 Watt (3 µsec Max.)
CHARACTERISTICS TYPICAL MIN/MAX
Ta=25º C Ta=-55º C to +85º C
Gain (dB) 13.5 12 Min.Power @ 1 dBComp. (dBm)20 - 250 MHz 28.5 26.0 Min.250 - 600 MHz 26.0 23.5 Min.Reverse Isolation (dB) -22 -20 Max.VSWR In 1.5:1 2.0:1 Max. Out 1.5:1 2.0:1 Max.Noise Figure (dB) 5.5 7.5 Max.Frequency 20 - 600 MHz 20 - 600 MHz Rev.
10/29/07
Available as: BXMP1006, SMA Connectorized Housing (H-7)
WNMP1006, 10 Pin 0.625” Sq. Gullwing Surface Mount (SG4)
======================================================================================
2030405060708090100200300400500600.02.03.03.03.03.04.04.05.05.12.19.21.14.15 5.305.425.495.505.535.555.555.555.545.485.375.415.655.38-2-9-16-21-27-32-38-43-448-100-1511579827.0688.0707.0705.0711.0714.0720.0718.0720.0716.0708.0665.0608.0555.0509-179176171167163160156152149114794716-21.22
.21.20.20.19.19.18.18.17.14.19.27.30.24
16416516516516416316316216117017915711325Linear S-Parameters
MHz Freq.Mag Deg Mag Deg Mag Deg Mag Deg
----S11--------S21--------S12--------S22----3428262321161272-52-100-145179-115
1612
2813 15Start 20 MHz Stop 600 MHz
Start 20 MHz Stop 600 MHz Start 20 MHz
Stop 600 MHz 14Reverse Isolation (dB)
Noise Figure (dB)
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001
元器件交易网。