IFI第七版紧固件标准目录

FASTENERS FOR USE IN STRUCTURAL APPLICATIONS STRUCTURAL BOLTS,STEEL,HEAT TREATED,120/105 KSI MINIMUN TENSILE STRENGTH
用于结构应用的紧固件
经热处理的最小抗拉强度为 120/105 ksi 的结构用钢螺栓
准代号b部分材料和涂镀ifi标准名称英文标准名称中文selectingfastenermaterial紧固件材料选择ifiboltandnutcompatibiliity螺栓和螺母的匹配ifiificorrosionplatingsandcoatings腐蚀作用镀层和涂层ifi1402000carbonandalloysteelwirerodsandbarsformechanicalfasteners用于机械紧固件的碳素钢和合金钢的线材圆钢钢棒saej4291999mechanicalandmaterialrequirementsforexternallythreadedfasteners外螺纹紧固件的机械和材料要求astma3072004standardspecificationforcarbonsteelboltsandstuds60000psitensilestrength碳素钢外螺纹紧固件astma4492004bspecificationforhexcapscrewsboltsandstudssteelheattreated12010590ksiminimumtensilestrengthgeneraluse经淬火和回火的钢制螺栓和螺柱astma320a320m2005aalloysteelboltingmaterialsforlowtemperatureservice低温用合金钢和不锈钢螺栓材料astma193a193m2006alloysteelandstainlesssteelboltingmaterialsforhightemperatureorhighpressureserviceandotherspecialpurposeapplications高温高压用合金钢和不锈钢螺栓材料astma194a194m2006bcarbonandalloysteelnutsforboltsforhighpressureorhightemperatureserviceorboth高压或高温作业或者高压高温作用用螺栓的碳钢和合金钢螺母astma3542004quenchedandtemperedalloysteelboltsstudsandotherexternallythreadedfasteners淬火和回火合金钢螺栓双头螺栓和其它外螺纹紧固件astmf5932002e2stainlesssteelbolt
标准代号
标准名称（英文） Materials for High Temperature or High 材料 Pressure Service and Other Special Purpose Applications
标准名称（中文）
ASTM A194/A194M-2006b
CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH PRESSURE OR HIGH TEMPERATURE SERVICE,OR BOTH
ASTM A449 2004b
Specification for Hex Cap Screws, Bolts, 经淬火和回火的钢制螺栓和螺柱 and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
输电塔镀锌螺栓和裸螺栓
ASTM F901 2001
ALUMINUN TRANSMISSION TOWER BOLTS AND NUTS
外科移植用精制钴铬钨镍合金
ASTM F1852-2005
TWIST OFF TYPE TENSION CONTROL STRUCTURAL BOLT/NUT/WASHER ASSEMBLIES,STEEL,HEAT TREATED 120/150 KSI MINIMUM TENSILE STRENGTH
标准代号 STANDARD 2002 E 部分：高强度结构螺栓 部分：高强度结构螺栓 IFI
标准名称（英文）
标准名称（中文）
COMMENTARY ON HIGH STREN说明
ASME B18.2.6-1996(R2004) ASTM A325-2006
ASTM F593-2002e2
STAINLESS STEEL BOLTS,HEX CAP SCREWS,AND STUDS
不锈钢螺栓、六角帽螺钉和柱头 螺栓 普通有色金属螺栓、六角帽螺钉 和螺柱
ASTM F468-2006
NONFERROUS BOLTS,HEX CAP SCREWS,AND STUDS FOR GENERAL USE
ASTM A490-2006
STRUCTURAL BOLTS,ALLOY STEEL,HEAT TREATED,150 KSI MINIMUN TENSILE STRENGTH
经热处理的最小抗拉强度为 150 ksi 的合金钢结构用螺栓
ASTM A394-2005
STEEL TRANSMISSION TOWER BOLTS,ZINC COATED AND BEAR
ASTM A320/A320M-2005a
ALLOY STEEL BOLTING MATERIALS FOR 低温用合金钢和不锈钢螺栓材料 LOW TEMPERATURE SERVICE 高温高压用合金钢和不锈钢螺栓
ASTM A193/A193M-2006 Alloy-Steel and Stainless Steel Bolting
高压或高温作业或者高压高温作 用用螺栓的碳钢和合金钢螺母
ASTM A354-2004
QUENCHED AND TEMPERED ALLOY STEEL BOLTS,STUDS,AND OTHER EXTERNALLY THREADED FASTENERS
淬火和回火合金钢螺栓、双头螺 栓和其它外螺纹紧固件
ASTM A563-2004a ASTM F594 2002 ASTM F467-2006
CARBON AND ALLOY STEEL NUTS STAINLESS STEEL NUTS
碳素钢和合金钢螺母 不锈钢螺母
NONFERROUS NUTS FOR GENERAL USE 通用非金属螺母
ASTM F788/F788M-2006 Surface Discontinuities of Bolts, Screws, 螺栓、螺钉和螺栓表面缺陷 and Studs, Inch and Metric Series ASTM F812/F812M-2003 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series ASTM F606-2006 TEST METHODS FOR DETERMINING THE 测定外螺纹和内螺纹紧固件、垫 MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS,WASHERS,AND RIVETS ASTM B633-1998e1 ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL ASTM A153/A153M-2005 ZINC COATING(HOT-DIP)ON IRON AND 钢铁构件镀锌层（热浸） STEEL HARDWARE ASTM B695-2004 COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL ASTM B696-2000(2004)e1 ASTM B766-1986(2003) COATINGS OF CADMIUM MECHANICALLY DEPOSITED ELECTRODEPOSITED COATINGS OF CADMIUM ASTM F1135-1999(2004) CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS 紧固件用铬酸镉或锌有机防蚀镀 层 镉电沉积镀层 镉机械沉积锌镀层 钢铁表面锌机械沉积镀层 钢铁表面电解沉积锌镀层 圈及铆钉机械性能的试验方法 螺母表面缺陷
IFI 第七版紧固件标准目录
发布时间：2007-01-25 标准代号 A 部分：螺纹 部分： ANSI/ASME B1.7M 1984(R 2001) NOMENCLATURE，DEFINITIONS，AND LETTER SYMBOLS FOR SCREW THREADS ASME B1.1 2003 UNIFIED INCH SCREW THREADS(UN AND UNR THREAD FORM) ASME B1.3M 1992(R 2001) 统一英制螺纹(UN 和 UNR 螺纹 形状) 螺纹的术语、定义和字母代号 标准名称（英文） 标准名称（中文）
标准代号 ASTM F1136-2004
标准名称（英文） CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS
标准名称（中文） 紧固件用铬/锌防蚀镀层
ASTM F1137 2000
PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS
第 5 级过盈配合螺纹
统一英制螺纹(UNR 螺纹形状)
紧固件材料选择 螺栓和螺母的匹配 腐蚀作用 镀层和涂层 用于机械紧固件的碳素钢和合金 钢的线材，圆钢，钢棒
外螺纹紧固件的机械和材料要求
Standard Specification for Carbon Steel 碳素钢外螺纹紧固件 Bolts and Studs, 60 000 PSI Tensile Strength
SCREW THREAD GAGING SYSTEMS FOR 尺寸接受的螺纹测量系统 英制 DIMENSIONAL ACCEPTABILITY－INCH SCREW THREADS(UN,UNR,AND UNJ) 和米制螺纹（UN, UNR, 和 UNJ） 统一螺纹的量规和测量
ANSI/ASME B1.2 1983(R GAGES AND GAGING FOR UNIFIED 2001) ASME/ANSI B1.12 1987(R2003) ASME B1.15 1995 UNIFIED INCH SCREW THREADS(UNJ THREAD FORM) B 部分：材料和涂镀 部分： IFI IFI IFI IFI IFI-140 2000 SELECTING FASTENER MATERIAL BOLT AND NUT COMPATIBILIITY CORROSION PLATINGS AND COATINGS CARBON AND ALLOY STEEL WIRE,RODS,AND BARS FOR MECHANICAL FASTENERS SAE J429 1999 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS ASTM A307 2004 INCH SCREW THREADS CLASS 5 INTERFERENCE-FIT THREAD
紧固件用磷酸盐/油和磷酸盐/有 机防蚀镀层
ASTM F1941-2000
ELECTRODEPOSITED COATINGTS ON SCREW THREADS(UN/UNR)]
螺纹紧固件上电镀层[统一英寸
THREADED FASTENERS [UNIFIED INCH 制螺纹（UN/UNR）]
C 部分：螺栓、螺钉和螺柱 部分：螺栓、螺钉和 ASME B18.2.1 1996 SQUARE AND HEX BOLTS AND SCREWS(INCH SERIES) IFI-149 2000 IFI-111 2002 IFI-115 2002 ASME B18.5-1990(R2003) ASME B18.9-1996(R2003) ANSI/ASME B18.10 1982(R 2000) ASME B18.15-1985(R2003) IFI-136 2002 ASME B18.6.2 1998 IFI-148 2002 D 部分：螺母 部分： IFI ASME/ANSI B18.2.2 1987(R 1999) IFI-145 2002 HEX FLANGE NUTS AND LARGE HEX FLANGE NUTS IFI-128 2000 ANSI/ASME B18.10 1982(R 2000) ASME B18.6.3-2003 SQUARE AND HEX MACHINE SCREW UNTS ASME B18.6.X DRAFT WING NUTS 蝶形螺母 方型和六角机器螺母 HEX COUPLING NUTS TRACK BOLTS 六角法兰螺母和大规格六角法兰 螺母 六角轴接螺母 轨道螺栓及螺母 Commentary ON NUTS SQUARE AND HEX NUTS 螺母的解释和说明 方型和六角螺母 STUDS AND BENT BOLTS Slotted Head Cap Screws THREADED PROJECTION WELD STUDS 螺柱和螺栓 开槽平头螺钉 焊接螺柱 FORGED EYEBOLTS 锻造环眼螺栓 Track Bolts and Nuts 轨道螺栓和螺母; PLOW BOLTS(INCH SERIES) 防松螺栓 LARGE SIZE HEAVY HEX SCREWS HEX FLANGE SCREWS FLANGE 12-POINT SCREWS ROUND HEAD BOLTS 正方型和六角型螺栓和螺钉(英 制系列) 大规格大六角螺钉 六角法兰螺钉 12 角法兰螺钉 圆头螺栓