E17-09-M-T-N-B-A-1中文资料
Minuteman E17 E20 地板洗刷机使用说明书
•Stop on level surface.•Disconnect the power to the machine by pulling the red Battery Connector located under the recovery tank near the batteries.•Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine.•Avoid contact with battery acid. Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries.•Do not clean machine with a pressure washer.•Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts.For Safety When Servicing or Maintaining MachineModelE17/E20Model No.E17BD / E17BDCE / E17BDQP / E17BDQPCEE17BDQPG / E17BDQPGCEE20BD / E20BDCE / E20BDQP / E20BDQPCEE20BDQPG / E20BDQPGE2032 amps 105Ah @20 hr 100Ah @20 hr 69 dBA 20 in (51 cm)33 in (84 cm) 15,000 ft 2 /hr ( 1,394 m 2)1.7 mph (2.7 km per hr)3 mph (4.8 km per hr) 24 volts 65 cfm (110 m3/hr) 45 inches ( 112mbar).60 HP (450 W)Disc 3/4 HP 1180 RPM Coming Soon 12 Gal (45 liters)13 Gal (49 liters)2%313 lbs (142 kg)203lbs (92 kg)47.4 x 21.3 x 42.3 (120.4 x 54.1 107.4 cm)E1732 amps105Ah @20 hr100Ah @20 hr69 dBA17 in (43 cm)33 in (84 cm)12,750 ft 2 /hr ( 1,185 m 2)1.7 mph (2.7 km per hr)3 mph (4.8 km per hr)24 volts65 cfm (110 m 3/hr)45 inches ( 112mbar).60 HP (450 W)Disc3/4 HP1180 RPMComing Soon12Gal (45 liters)13 Gal (49 liters)2%306 lbs (139 kg)196 lbs (89 kg)44.4 x 18.8 x 42.3 (112.8 x 47.8 x 170.4 cm)Current (Max)Battery Capacity (Lead Acid)Battery Capacity (Gel)Sound Level Cleaning path width Squeegee width Theoretical productivity (Brush Drive)Working speed (Brush Drive)Transport speed Rated voltage Vacuum flow Vacuum waterlift Vacuum power Brush type Brush motor(s) power Number of brushes Brush RPM Aqua-Stop equipped Solution capacity Recovery capacity Working Grade Weight with batteries Weight without batteries Dimensions (LxWxH)Technical SpecificationsTable of ContentsMain Assembly (1)Main Assembly BOM (2)Brush Drive Base Assembly (3)Brush Drive Base Assembly BOM (4)E17/20 Base Assembly (5)Chassis Assembly (6)Chassis Assembly BOM (7)Solution Valve Assembly (8)Solution Tank Assembly (9)Lift Pedal Stop Assembly (10)Recovery Tank Assembly (11)Recovery Tank Assembly BOM (12)Handle Assembly (13)Battery Tray Assembly (14)Electrical Box Assembly (15)Electrical Box Assembly BOM (16)Electrical Box Cover Assembly (17)Vac Motor Assembly (18)17” Brush Deck Assembly (19)17” Brush Deck Assembly BOM (20)20” Brush Deck Assembly (21)20” Brush Deck Assembly BOM (22)E17 Brush Hub Assembly (23)E20 Brush Hub Assembly (24)Rear Squeegee Assembly (25)Squeegee Mechanism Assembly (26)Wiring Diagrams (27)Main AssemblyMain Assembly BOMBrush Drive Base AssemblyBrush Drive Base Assembly BOME17/20 Base AssemblyChassis AssemblyChassis Assembly BOMSolution Valve AssemblySolution Tank AssemblyLift Pedal Stop AssemblyRecovery Tank AssemblyRecovery Tank Assembly BOMHandle AssemblyBattery Tray AssemblyElectrical Box AssemblyElectrical Box Assembly BOMElectrical Box Cover AssemblyVac Motor Assembly17” Brush Deck Assembly17” Brush Deck Assembly BOM20” Brush Deck Assembly20” Brush Deck Assembly BOME17 Brush Hub AssemblyE20 Brush Hub AssemblyRear Squeegee AssemblySqueegee Mechanism AssemblyWiring DiagramsMinuteman International Made Simple Commercial Limited WarrantyMinuteman International, Inc. warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Minuteman will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals. All warranty claims must be submitted through and approved by factory authorized repair stations.This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords, switches, hoses, rubber parts, electrical motor components or adjustments. Parts not manufactured by Minuteman are covered by and subject to the warranties and/or guarantees of their manufacturers. Please contact Minuteman for procedures in warranty claims against these manufacturers.Special warning to purchaser -- Use of replacement filters and/or prefilters not manufactured by Minuteman or its designated licensees, will void all warranties expressed or implied. A potential health hazard exits without original equipment replacement.All warranted items become the sole property of Minuteman or its original manufacturer, whichever the case may be. Minuteman disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose. Minuteman assumes no responsibility for any special, incidental or consequential damages.This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers outside the U.S.A. and Canada should contact their local distributor for export warranty policies. Minuteman is not responsible for costs or repairs performed by persons other than those specifically authorized by Minuteman. This warranty does not apply to damage from transportation, alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of income due to malfunctions of the product.If a difficulty develops with this machine, you should contact the dealer from whom it was purchased.This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.Cord Electric Group………. Three years parts, two years labor, ninety days travel (Not to exceed two hours) Exceptions………. Port-A-Scrub, one year parts, six months laborMPV 13, one year partsMPV 14 and 18, two years parts, one year laborRapidAir blower, one year parts, one year laborExplosion-Proof Vacuum, one year parts, one year laborPneumatic Vacuums, three years parts, one year laborEX 12 and EX12H, one year parts, one year laborBattery Operated Group….. Three years parts, two years labor, ninety days travel(Not to exceed two hours)Exceptions……Sweepers, one year parts, one year labor, ninety days travel(Not to exceed two hours)Internal Combustion Group….One year parts, one year labor, ninety day travel(Not to exceed two hours)Replacement Parts……………..Ninety daysBatteries………………………….0-3 months replacement, 4-12 months pro-ratePolypropylene Plastic Tanks…Ten years, no additional laborA Member of the Hako Group988720 Rev B 10/07。
(完整版)RunningMan-嘉宾名单
2010年每期嘉宾名单介绍E01 100711嘉宾：李孝利、黄静茵昂贵队:刘在石、金钟国、宋仲基、李光洙、黄静茵（胜利）便宜队：池石镇、李孝利、HAHA、GaryE02 100718 -E03 100725(宋智孝加入）嘉宾：李天熙、具荷拉(Kara）客场队：刘在石、李光洙、宋智孝、Gary、HAHA主场队：池石镇、金钟国、具荷拉、宋仲基、李天熙（胜利) E04 100801 —E05 100808嘉宾：Nichkhun（2PM）、Jessica（少女时代)小孩队：宋仲基、金钟国、Gary、HAHA 、Jessica（胜利)大人队：刘在石、池石镇、Nichkun、李光洙、宋智孝E06 100815（缺宋智孝）嘉宾：se7en、孙丹菲、金申英小孩队：宋仲基、金钟国、Gary、HAHA、金申英（胜利)大人队:刘在石、池石镇、se7en、孙丹菲、李光洙E07 100822嘉宾：赵权(2AM)、郑容和(C.N。
Blue)、恩静(T—ara）红队：金钟国、HAHA、 Gary、宋仲基、恩静蓝队：刘在石、池石镇、宋智孝、郑容和、赵权（胜利)E08 100829嘉宾：Victoria（fx）、李准(MBLAQ）、朴俊奎红队：金钟国、 HAHA 、Gary、Victoria、朴俊奎(胜利）蓝队：刘在石、池石镇、宋智孝、李光洙、李准E09 100905嘉宾：金秀路、申凤善、李弘基（FT—Island)红队：金钟国、Gary 丶HAHA、李弘基、申凤善蓝队:刘在石、池石镇、李光洙、宋智孝、金秀路(胜利) E10 100912嘉宾：车太贤、尹世雅红队：金钟国、 Gary 、HAHA、宋仲基、尹世雅（胜利)蓝队：刘在石、池石镇、李光洙、宋智孝、车太贤E11 100919嘉宾：郑容和（C.N.Blue）、金济东胜利：池石镇、HAHA、宋智孝、金济东、郑容和E12 100926胜利：金钟国、Gary、HAHA、宋智孝E13 101003嘉宾：Lizzy(After School)、张东民胜利：刘在石、池石镇、Gary、宋智孝、李光洙101010 因直播韩国职业棒球季后赛停播E14 101017嘉宾:Lizzy（After School)胜利：池石镇、HAHA、宋智孝、李光洙、LizzyE15 101024嘉宾：Tony An（H。
麦克维尔中央空调故障代码
麦克维尔中央空调故障代码麦克维尔中央空调故障代码G9 Z' M' {1 m k1 v9 c: j- pjtMWCP1.0) Z$ W( I. n- ?9 A. o+ n: l故障代码（新款1.0）MWCP 老款( F7 @; ~ r% i& o1 _+ x序号输入端口故障描述代码故障处理序号代码故障描述故障处理: W# M! y1 q2 y7 H1 p' q/ p1 LP1 压缩机1低压L1 压缩机1停 1 E9 流量不足系统停机! {2 ?/ c, f: D8 u2 HP1 压缩机1高压H1 压缩机1停2 E8 水泵过载系统停机& A+ j6 @, J% Z9 P/ I3 LP2 压缩机2低压L2 压缩机2停3 E7 风机过载系统停机$ l* E* G: p6 z4 HP2 压缩机2高压H2 压缩机2停 4 E6 压缩机3过载压缩机3停9 Q& x7 W0 Q. Q( b* Z8 h5 LP3 压缩机3低压L3 压缩机3停 5 E5 压缩机2过载压缩机2停7 ^! [2 p. F, E. G6 HP3 压缩机3高压H3 压缩机3停6 E4 压缩机1过载压缩机1停$ m1 `) g3 k: ?* J8 i7 A* ^3 H6 S7 LP4 压缩机4低压L4 压缩机4停7 E3 压缩机3高/低压压缩机3停4 G$ Q$ o: W! L; P8 w4 J3 U) E8 HP4 压缩机4高压H4 压缩机4停8 E2 压缩机2高/低压压缩机2停& h; n @4 g# o- c9 OV-COMP1 压缩机1过载H5 压缩机1停9 E1 压缩机1高/低压压缩机1停1 ~; j$ L5 e1 j, N) q6 E10 OV-COMP2 压缩机2过载H6 压缩机2停10 E0 感温头短/开路停机、关电加热2 }* c1 Y" r4 }: T( U) d( C5 e9 r% U11 OV-COMP3 压缩机3过载H7 压缩机3停m/ D t/ v8 w1 @6 ]/ o; ~' I5 a12 OV-COMP4 压缩机4过载H8 压缩机4停MWCP1.0新款机型设置( M7 S: o* d7 v j13 OV-FAN 风机过载H0 系统停机机型KEY1.2 KEY1.30 J$ V2 M2 X1 e: [/ G14 OV-PUMP 水泵过载E7 系统停机单冷ON ON5 p; @8 ^" q0 T15 FLOW 水流不足L8 系统停机单冷+电加热ON OFF1 V/ s' g f" R$ o) [0 M0 g2 _16 E-PECT 电加热过载H9 电加热停冷暖OFF 0N% j* c6 p+ S5 B$ c& p' [17 TH1 回风感温头E0 系统停机冷暖+电加热OFF OFF; M4 a l7 ]4 t% \18 TH2 出水感温头E5 系统停机* N1 A5 t0 H" H, y0 P( ~6 G( ]: ?# _19 TH3 盘管1感温头E1 压缩机1停* M/ V/ P# N0 U20 TH4 盘管2感温头E2 压缩机2停3 {7 Y* R: t5 x# i2 C21 TH5 盘管3感温头E3 压缩机3停0 n* \0 [" P/ U. E' y) f' k22 TH6 盘管4感温头E4 $ u7 n" K& F( G& ]0 }* s4 c4 C23 出水温度过高E6 系统停机: L' o/ ~6 z; q2 B; L) k8 X! C9 {24 出水温度过低L9 系统停机* l) [' P9 s" `# }* C25 无反馈信号L0 系统停机0 s: |: d+ _2 j. E26 通讯故障E9 + w4 E3 P& O/ p7 L4 P$ O27 存储器故障E8+ o# s8 ^' p. mMAC故障代码（两位数码）6 H4 @6 r% l2 `故障显示系统4室内盘管温度头短路系统1室内盘管温度头断路系统2室内盘管温度头断路系统3室内盘管温度头断路系统4室内盘管温度头断路系统1室外盘管温度头短路系统2室外盘管温度头短路系统3室外盘管温度头短路系统4室外盘管温度头短路系统1室外盘管温度头断路系统2室外盘管温度头断路系统3室外盘管温度头断路系统4室外盘管温度头断路系统1室内盘管结冰系统2室内盘管结冰系统3室内盘管结冰系统4室内盘管结冰 4 I5 v( h8 O4 {代码E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 E33 E34 E35 % y# L+ p z9 p# N故障显示需手动复位系统1盘管温度过高系统2盘管温度过高系统3盘管温度过高系统4盘管温度过高系统1压力过高系统2压力过高系统3压力过高系统4压力过高压缩机1停机/制冷剂泄露压缩机2停机/制冷剂泄露压缩机3停机/制冷剂泄露压缩机4停机/制冷剂泄露室内回风温度传感器短路室内回风温度传感器断路系统1室内盘管温度头短路系统2室内盘管温度头短路系统3室内盘管温度头短路: h" V! d F% }4 c' n5 u3 G, _6 G代码E01 E02 E03 E04 E05 E06 E07 E08 E09 E10 E11 E12 E13 E14 E15 E16 E17 E18% |4 e" c2 |: n* T" I' f7 b' ~& x) t% l8 }; m" e/ ?- ?1 }5 \- J9 Y6 QMAC单压缩机组故障代码及处理方法MAC 双压缩机组故障代码及处理方法( P+ B1 g- ?8 K O序输入端口故障描述代码故障处理序输入端口故障描述代码故障处理, g) D% l; F8 O( n1 TH1 回水感温线路/开路E1 关闭所有外设 1 TH1 回水感温线路/开路E1 关闭所有外设' F) ^" W0 \! S0 F: z2 TH2 出水感温线路/开路E2 关闭所有外设 2 TH2 出水感温线路/开路E2 关闭所有外设. \1 I& u8 A4 i, _1 H+ y+o3 TH3 回风感温线路/开路E3 关闭所有外设 3 TH3 回风感温线路/开路E3 关闭所有外设# }7 x$ Q1 d4 Q8 W' K) b" b+ }4 TH4 除霜感温线1短/开路E4 关闭所有外设 4 TH4 除霜感温线1短/开路E4 关闭所有外设3 a: S# Z: W" t" x/ N8 U5 TH5 除霜感温线2短/开路- 不判断 5 TH5 除霜感温线2短/开路E5 关闭所有外设0 P! x4 ?9 `% [' J" S6 OVHT/HP2 电加热过载E6 仅关闭电加热 6 OVHT/HP2 压缩机2高压报警E6 仅关闭电加热1 t0 h" J6 ?9 X+ f% {7 FLOW 水流量不足E7 关闭所有外设7 FLOW 水流量不足E7 关闭所有外设5 I( b4 ^& r3 d# j6 N8 OV-PUMP 水泵过载E8 关闭所有外设8 OV-PUMP 水泵过载E8 关闭所有外设- }+ Z2 K- g- m# A" S/ d9 OV-FAN 风机过载E9 关闭所有外设9 OV-FAN 风机过载E9 关闭所有外设* W3 X) g3 J. k( |; l9 u% g10 OV-COMP1 压缩机过载EA 仅关闭电加热10 OV-COMP1 压缩机1过载EA 仅关闭压缩机1) G, D% P. J( h6 s9 ^11 HP1 压缩机高压报警EC 仅关闭电加热11 OV-COMP2 压缩机2过载EB 仅关闭压缩机2: w* o4 n* \8 Z+ ^" i12 LP1 压缩机低压报警ED 仅关闭电加热12 HP1 压缩机1高压报警EC 仅关闭压缩机1# l+ f ]+ k W: [; t13 U6 存储器存取故障EE 关闭所有外设13 LP1 压缩机1低压报警ED 仅关闭压缩机1) A3 t0 s8 U/ k4 \* }, R. a% i14 ……制冷出水温度过低EF 关压缩机水泵辅助加热运行14 FREZ/LP2 压缩机2低压报警EE 仅关闭压缩机2. G5 R: L: i" x# S0 D% E0 H15 ……. 制冷出水温度过低EF 关闭压缩机，水泵辅助加热运行& |7 e/ F s# w1 ~0 n2 \# TAPM01C型控制器（机型设置）0 s) X& P4 a; N# ~四位开关机型类别及规格配用线控制器状态备注$ J2 R' G: }! |, ~$ z5 l3 E8 H机型码1# 2# 3# 4# 风冷系列热泵- m6 X/ z7 Q7 ~4 v7 L8 oP0 0 0 0 0 热泵C3B+SWING 标准热泵0 }/ T$ w7 n, O# N. c' j+ O* MP1 0 0 0 1 C3J-Q （热泵+辅助电加热）标准热泵+HEATER 0 J7 ]! ]0 P O8 OP2 0 0 1 0 热泵C3A+ SWING 标准热泵+ SWING3 \) @; @7 `+ x$ y9 fP3 0 0 1 1 热泵+辅助热盘管标准热泵+HEATER" q* @9 O) N8 k) @) q1 P4 uP4 0 1 0 0 C3B单冷标准单冷风冷系列单冷（无室外盘管感温头）! ?3 r' H* L W9 {7 s& i6 dP5 0 1 0 1 C3B单冷+电加热+SWING 标准热泵+ SWING & S0 L) O+ h. }% L4 x5 q- uP6 0 1 1 0 单冷C3A+SWING 标准单冷+ SWING * x& G4 n' t: B' N* YP7 0 1 1 1 EE 保留! J% c W- o( ^- q" `9 {7 g* V0 q, zP8 1 0 0 0 C3J-P+热泵+ SWING 标准热泵水冷系列热泵' b6 B$ h0 j% ZP9 1 0 0 1 C3J-P+热泵+电加热标准热泵+HEATER ; S& |. X7 H3 u1 ~& IPA 1 0 1 0 C3A-A热泵+ SWING 标准热泵+ SWING]* g4 n- Z9 U7 H1 D2 fPb 1 0 1 1 EE 保留A3 P/ S) T/ mPc 1 1 0 0 C3J-P单冷+ SWING 标准单冷水冷系列单冷, O& }3 T, D6 f2 t4 O2 K3 h" A. OPd 1 1 0 1 C3J-P+单冷+电加热+SWING 标准热泵 2 n' p+ F- O( ~, t2 ~9 A: @PE 1 1 1 0 C3A-A单冷+ SWING 标准单冷+ SWING ' i1 S% M1 o" |3 i, V3 `PF 1 1 1 1 EE 保留7 T( Y9 n( |- J& ZAPM01C型控制器故障代码: l) v0 H# U2 S% R' S+ i- G- D故障代码故障现象故障代码故障现象故障代码故障现象' \/ k0 A; R6 x5 \5 VE0 控制器系统故障E5 内盘传感器故障EA 水泵故障或水位超限) w0 G' q7 A: _$ h7 vE1 压缩机电流过载E6 外盘传感器故障EB 冷却水温度过高或过低- ^% j: N$ H5 I' H) N) SE2 系统低压保护E7 外环境传感器故障EC 网络接口通信故障, h& @9 o* v1 M, L, ]E3 系统高压保护E8 冷媒泄露7 ]; [ j5 b* z3 `6 b! B$ uE4 回风传感器故障E9 盘管超过68度1 n- i9 @0 G2 }3 ~" |% }- v7 B1 n/ ]. c7 v0 |APM01C型控制器C3B灯板显示（共FAN/POEWER ,DRY/TIME ,HEAT.COOL四LED）& S$ j; {' v* C* P1 M故障显示故障现象( _6 c! E2 ~: f' M( v7 d! s5 r3 mFAN/POWER灯闪,其它全灭回风温度传感器脱落或短路6 V- F% e9 Y* ~6 B# u/ ?! }DRY/TIMER灯闪,其它全灭室外盘管传感器脱落或短路% F4 a9 ?0 u; L2 w+ {0 lHEA T灯闪,其它全灭除霜) N3 I+ r6 f, g) b bCOOL灯闪,其它全灭室内盘管传感器脱落或短路( x) ^4 |$ y7 L6 `5 Q/ MCOOL, DRY/TIMER灯闪,其它全灭冷媒泄露0 b) X B! M. A' c( w$ TCOOL灯闪,其它全灭盘管温度超过68度,压缩机过载+ ?) ]# g- a7 [# j: jDRY/TIMER HEAT灯闪,其它全灭水温过高或过低/ D, C- R3 A; O8 K% |( s8 MFAN/POWER灯闪,其它全亮E13 a' h O1 i. y& w1 q9 _0 yCOOL灯闪,其它全亮E2[( _$ D4 D1 W, R I5 {DRY/TIMER灯闪,其它全亮E30 u& N7 M, J3 P+ k2 OMWH整体水源热泵故障代码MWH水源热泵指示灯故障* f" x2 p) y- D+ M2 m4 v7 T) {代码故障现象FAN MODE SLEEP LED 状态分析5 [+ e0 ` N7 k, ?2 w4 pE0 控制器系统故障AUTO HIGH MED LOW COOL DRY HEAT FAN' D9 t1 e( f# L2 W* {) ?" YE1 风机压缩机过载保护水流开关故障灭其中之一亮亮灭灭灭灭—定风速制冷运行9 X5 t9 D" E t) A2 iE2 系统一压缩机高,低压力保护亮其中之一亮亮灭灭灭灭—自动风速制冷运行7 f+ ?5 n) J- N5 i: T7 oE3 系统二压缩机高,低压力保护灭灭灭灭灭亮灭—灭—除湿运行( M8 r$ P/ ~- P( q2 iE4 室内回风感温头脱落灭其中之一亮灭灭亮灭灭—定风速制热运行5 \% c) J* r+ e. C! OE5 室内系统一盘管感温头脱落亮其中之一亮灭灭亮灭灭—自动风速制热运行" E2 | ~3 g) UE6 室内系统二盘管感温头脱落灭其中之一亮灭灭灭亮灭—定风速送风运行$ B2 X3 i5 t1 u5 z! N3 @; CE7 室外循环水温感温头脱落亮其中之一亮灭灭灭亮灭—自动风速送风运行+ K( j: _; `, u- b6 iE8 制冷剂泄露灭其中之一亮亮灭闪烁灭灭—定风速自动制冷运行$ e# D/ f1 _1 L+ i, r0 Q7 D4 FE9 室内盘管温度保护亮其中之一亮亮灭闪烁灭灭—自风速自动制冷运行% ^" F* S3 f4 Y, M0 w! s( WEA 水泵故障或水位超限灭其中之一亮闪烁灭亮灭灭—定风速自动制热运行' j# G' P" X5 f! M- s. ~* GEB 进出水温度保护亮其中之一亮闪烁灭亮灭灭—自风速自动制热运行/ C8 k! s* R3 C5 O8 A$ n+FE 接口通讯故障灭灭灭灭闪烁灭灭—灭—压缩机过载/ A# f5 m, h9 a灭灭灭闪烁灭灭灭灭灭—室内回风传感器5 u$ P9 E+ e4 Y3 I/ Y* f灭闪烁灭灭灭灭灭灭灭—室内水温传感器) |7 v, U. L; `7 ]7 g灭灭闪烁灭灭灭灭灭灭—室内盘管传感器, D) l0 W5 g! _! c J6 j灭灭灭灭灭灭灭灭闪—冷媒泄漏3 l- t( W U; f W1 [+ q+ |% P \; a" }闪烁水温超压缩机频繁跳机l4 T* `/ {+ y, o: X- A, I6 p. W% |MCC机组(C3BC3J模块的SLM控制器). ]2 _8 M. b& u% @' q# M7 d1 OFAN MODE SLEEP 运行状态$ w- y, X5 j# m6 `# V AUTO HIGH MED LOW COOL DRY HEAT FAN # i6 c @+ |$ D/ q& N) t0 l# Q灭其中之一亮亮灭灭灭灭定风速制冷运行2 g+ k# k" ~" p& r: P1 {, R亮其中之一亮亮灭灭灭灭自动风速制冷运行- s3 g# ]5 C5 C* s% B) P. w0 H灭灭灭灭灭亮灭灭灭除湿运行' h5 `" R( F" o g; A灭其中之一亮灭灭亮灭灭定风速制热运行4 m; h7 J8 w+ @0 f- @/ e% z亮其中之一亮灭灭亮灭灭自动风速制热运行( b' G* B/ D8 v2 r8 \5 X灭其中之一亮灭灭灭亮灭定风速送风运行. t) V4 D& m9 ]* \" P/ X1 C亮其中之一亮灭灭灭亮灭自动风速送风运行% `# _+ y5 a% b' [7 M灭其中之一亮亮灭闪烁灭灭定风速自动运行模式的制冷运行8 j$ [. _* P |) W- ~7 S亮其中之一亮亮灭闪烁灭灭自动风速自动行模式的制冷运行: d N, o" K6 G3 a% D9 Z灭其中之一亮闪烁灭亮灭灭定风速自动运行模式的制热运行/ d2 I: H% q j! l8 a亮其中之一亮闪烁灭亮灭灭自动风速自动行模式的制热运行$ {6 Z w& }+ s4 k灭灭灭灭闪烁灭灭灭灭压缩机过载保护# i, ]% H" g; u O3 p5 I灭灭灭闪烁灭灭灭灭灭室内回风感温探头脱落- L7 E- A. x8 a: ?% [/ U9 w/ L灭闪烁灭灭灭灭灭灭灭室外盘管感温探头脱落$ f! k! m. d; J0 y1 ]7 X灭灭闪烁灭灭灭灭灭灭室内盘管感温探头脱落) b+ c" [; {! S7 i+ h灭灭灭灭灭灭闪烁灭灭室外机除霜. p9 f! \$ w% Q* O8 {灭灭灭灭灭灭灭灭闪烁制冷剂泄露' t- A& o/ A' f, {& W9 J' l4 z3 Y水源热泵1 s9 c! \( U& A- q5 W单冷机型指示灯符号故障现象) i! Q9 S3 q7 M) c0 `- d 指示灯含义运行指示灯定时指示灯睡眠指示灯- V( a9 {4 W) c! Y7 _1 A) t& m1 a指示灯状态亮亮/灭亮/灭电源开、机器正常工作) {0 c8 J3 \% N% E( y% S: Y 闪烁室内/室外盘管感温头松脱或短路! G% ?* r, n4 s" }# Y$ K闪烁压缩机过载5 i/ Y5 z+ x( \) m/ ~/ f$ K2 D+ ^# u X: ^闪烁闪烁水盘冷凝水满溢' o8 @) ^. V3 a* h6 O' l 闪烁闪烁水温过高或过低+ Q+ d* ]1 ?4 t# z4 J, p; l# X8 ^' n& G热泵机型指示灯符号故障现象- Q: h9 |! M: \) j! n E指示灯含义运行指示灯定时指示灯制热指示灯+ Y( f: p7 Y$ i; R0 }) w: A& ]指示灯状态亮亮/灭亮/灭电源开，机器正常工作2 u$ R9 X" w* i. m9 T( w( w, D闪烁室内盘管感温头松脱或短路或室外换热器水温头松脱3 P, D6 I( y* J% U! [; N% v" ~- T 闪烁压缩机过载; q, m$ c1 Z; d8 T7 `+ V 闪烁闪烁水盘冷凝水满溢" T; Q6 W# d6 n. i5 N! D; _闪烁闪烁水温过高或过低1 a% B) [* P: m- H7 x3 e& F& D线控器面板指示分析：水源热泵4 `7 h% ^; {$ ]' l; `: K' bFAN MODE SLEEP 数码管判断状态分析/ Q. B8 L0 ?) kAUTO HIGH MED LOW COOL DRY HEAT FAN " N' b: `3 X7 C$ u0 { 灭其中之一亮亮灭灭灭灭不变机组正常运行定风速制冷运行) X8 c! m; J: x! s9 k* Q' H亮其中之一亮亮灭灭灭灭不变自动风速制冷运行, t- \+ g. V% w$ h; r L0 O'I灭灭灭灭灭灭灭不变灭不变除湿运行) [6 v- p d& v8 d灭其中之一亮灭灭亮灭灭不变定风速制热运行0 i7 V/ C- l& v7 J7 A2 w6 u亮其中之一亮灭灭亮灭灭不变自动风速制热运行9 R* ?2 h/ o$ A8 f/ t灭其中之一亮灭灭灭亮灭不变定风速送风运行7 [. g) R1 J! ]+ C亮其中之一亮灭灭灭亮灭不变自动风速送风运行" k/ P; p% q9 u7 D3 ~5 ]灭其中之一亮亮灭闪烁灭灭不变定风速自动运行模式的制冷运行' W" c% t8 ?9 G& Z ^; }" e亮其中之一亮亮灭闪烁灭灭不变自动风速自动运行模式的制冷运行5 l* P/ b) I- T7 `灭其中之一亮闪烁灭亮灭灭不变定风速自动运行模式的制热运行0 k7 k: l# E) V/ \, @亮其中之一亮闪烁灭亮灭灭不变自动风速自动运行模式的制热运行7 N! m9 ]- e0 G* E8 oMDB100T 线控器故障代码; q7 A" y9 d+ z! u* S& T序号故障或过程数码显示6 V- |# k. q( t$ x2 N5 u1 ROOM SENSOR开路或短路EO% { S- x: `# |9 X$ e) h2 IDI SENSOR 开路及短路E18 P" y& Q0 k' b$ K3 ODI SENSOR开路及短路E25 `, F+ X: A/ Z- s6 p: s7 H0 U4 ID2 SENSOR 开路及短路E3: ^: U+ i5 C& q; U5 OD2 SENSOR开路及短路E4: C( m( {0 \ Q6 COMPI过载E5- y P4 k: k1 B/ U# k9 ~7 COMP2过载E67 K& b* N' k8 ]1 i8 COMP1高压保护EA) s! P8 y D& ]6 Q9 COMP2高压保护Eb' V" R" J2 r3 l( G" K10 COMP1低压保护Ec& ^- s. Z& c0 W8 h: O11 COMP2低压保护Ed6 b8 j: J; k- g* ?; ?4 l' N12 电加热故障E7/ t8 d! ~0 I4 x5 m! }13 室内风机过载E84 V1 p* W0 `3 Z1 K' A14 系统一除霜－1$ |* _4 u& N3 C$ b8 v15 系统一除霜－2; r- U8 C; }# Q9 M# v" o" i) _. G: }; ]6 h1 j% s4 {" o& v) P4 q2 r7 C) L6 e7 n/ g {. T7 H9 a4 m2 x6 u' f. [主机故障代码MDS-B5 A& }+ e* Z9 D故障代码故障说明故障处理! y$ P! M1 z' w. J# FEO 系统故障8 _6 G: M: Z# ?9 v$ u& SE1 TH1开路/短路（排气温度）7 [, c, V P" vE2 TH2开路/短路（1#进盘）/ p A n: q9 i- |2 jE3 TH3开路/短路（1#中盘）w/ q% x$ m- ]0 G, i A/ AE4 TH4开路/短路（2#进盘）* t5 f: B5 z! R( e E5 TH5开路/短路（2#中盘）; Q/ F6 a" h3 E2 p) Q4 YE6 TH6开路/短路（3#进盘）/ _% z/ R$ I0 X6 `0 d% jE7 TH7开路/短路（3#中盘）! I9 G" J8 k. v& T% {E8 TH8开路/短路（环境）% I O( q/ O& |. HE9 TH9开路/短路（总出盘） 3 Y! B) b8 J8 h2 y7 s- v( MEA TH10开路/短路（过冷进）9 l }$ }7 v* P* r3 PEB TH11开路/短路（过冷出）/ R5 N8 a+ z3 g) {2 m; mEC TH12开路/短路（回气）7 j% g( J; V3 ]. z8 F& @EF 紧急运行( i$ h% {, L' I7 F: \ cFO 外机存贮器故障$ k# {, ^! B" k' t4 ZF7 环境温度超出运行允许范围( L3 E; S3 e* o! a* CF8 四通阀故障; O/ K( w4 Z9 Q" B& t8 P7 ZF9 冷媒泄漏0 n( ^* L2 r2 G+ e$ yFE 主从机通讯故障' A& k* S% R1 h) R/ kHO 数码过载) t- x! ~" O( e* E1 q% V, N) cH1 定速1过载k" p* H" e" rH2 定速2过载' R% k6 x, p$ m; [. D0 h" QH3 定速3过载: F/ U7 C% O# [% BH4 高压过高1 z5 m" ]' P0 [/ nH5 高压传达感器故障- W/ m4 k3 R% ] h, Z$ ZH6 排气温度过高; A' f4 {# W3 NLO 过热度太小保护+ h% a/ n( k* ZL1 低压过低 4 b5 U9 p. U4 i- W2 G$ v; D9 k9 SL2 低压传达感器故障! O4 A/ `5 T' q7 i' C5 \6 {2、从机的故障代码! s$ W2 @% p [+ k3 o# T故障代码故障说明故障代码故障说明( s p( g; o# K9 A$ F' p10 系统故障29 冷媒泄漏# j b y* c' _: Y; e' t1 v11 TH1开路/短路（排气温度）30 数码过载/ g& e( F% k% l* g8 L12 TH2开路/短路（1#进盘）31 定速1过载" }5 E' \/ M; @13 TH3开路/短路（1#中盘）32 定速2过载q6 m- W" l2 x+ a14 TH4开路/短路（2#进盘）33 定速3过载s6 p! I; V6 R& x& i15 TH5开路/短路（2#中盘）34 高压过高( g5 ~ q' e& S/ T% |16 TH6开路/短路（3#进盘）35 高压传感器故障* F2 K6 [) ?3 r3 L: X! o17 TH7开路/短路（3#中盘）36 排气温度过高$ }, T/ v& `+ I8 Y$ V4 M7 G18 TH8开路/短路（环境）40 过热度太小保护6 w. m0 O: G5 H3 M5 b19 TH9开路/短路（总出盘）41 低压过低8 P6 Z* [. f1 U# Y. T" ?9 V3 s1A TH10开路/短路（过冷进）42 低压传感器故障$ }7 }9 u' ?$ P3 @3 R1B TH11开路/短路（过冷出）( z4 U, y4 |; ]) V+ v1C TH12开路/短路（回气）r$ G0 Q! ] V, I4 a1F 紧急运行- l1 o. ]" {2 p' Q4 b20 外机存贮器故障! S) Z( n2 [3 P6 N0 Y27 环境温度超出运行允许范围, y1 X$ N4 ?( g+ y( P28 四通阀故障# S3 C: s0 |8 ]! }1 N2 _3、室内机的故障代码2 c6 E2 Y9 {* S2 K4 t7 [2 p3 b' y' f! AF1 内机进盘传感器故障/ h+ {# L2 ~4 ~% L- yF2 内机中盘传感器故障; s4 ~8 f7 h: [5 wF3 内机出盘传感器故障 4 u; ]% B1 a% T, E1 V( P2 r3 q& \9 T! s* NF4 内机回风传感器故障0 N5 i6 {0 N. B. x G' TF5 内机与线控器通讯故障7 C$ S1 v- |& a$ d( W. f+ V& y/ bF6 内机与线控器通讯故障, M( f l9 l' H1 w+ n3 _FA 线控器存贮器故障# d2 v2 p$ j& l" s) N% HFB 水泵故障（内机排水泵）- o: p. ]" n7 |# ^+ oFC 内外机通讯故障! C4 V9 Y/ Z2 G0 \4 f3 ~4 l$ V二、灯板的故障指示总表4 p" a" Z6 f! n9 ?3 v( l5 H0 h故障类型Heat Fan Dry Cool + E8 [8 c3 N- y1 g; W0 R室外机温度传感器故障闪闪闪闪7 H! V! g; { P! `+ \室内机温度传感器故障闪闪闪亮9 Z- t* W) n& {# e1 K+ c8 |系统故障闪闪闪灭# B" z$ q, G8 ?% W1 z室内机水泵故障闪闪亮闪. m& R9 {9 M E压缩过载（包括数码、定速）闪闪亮亮; Z3 J% @8 U8 F+ V; `室外机压力传达室感器故障闪闪亮灭, I7 h0 B; S* h; [1 O& M/ D; O* I. }$ h& R+ ^6 l; L机组的故障问题：MDS-B机型% J/ i: t) V$ I1 m, t$ E现象原因分析解决方案$ y+ w( M% @# y& u有空气吹出但压缩机不工作室温比设置温度高（制热时）或低（制冷时）重新设置温度, |. o( T9 }" b9 W" C! P8 c在制热和除霜模式时，室内机刚刚启动等待10分钟左右# s+ j% V- a5 g5 P) ]/ |9 |: o4 i( ~空调机组不工作电源没有接通检查并接通电源5 v9 k) t: v8 D( ~. y1 N+ a 设置了定时启动功能等待或取消定时启动: M" `# j3 }& M& y* b+ Q; @主电源的熔断器烧断更换熔断器3 k" p( {0 W9 q H冷气太小或热气不足过滤网太脏清洗或更换过滤网5 m# @' }) e5 I7 h 回风口阻塞去除障碍物+ M& M7 i$ v: m0 s) D' R9 F遥控器显示模糊电池电量不足更换新电池+ V/ z1 W$ R6 v; R2 P! v电池没有正确安装重新正确安装9 G6 x( q1 W/ ]/ b; r) y2 K E室内机前面板有冷凝水空气湿度太大除湿' @# v3 Y; x2 L/ Q& ?温度设置太低提高设置温度. v- s6 A/ O# Q' K( x+ W: k, R, A! }' K6 L4 w8 e- l0 A! o4 }指示灯闪烁方式对应故障代码表：MDS-B机型! r1 n g* L% |' \) k故障类型Heat Fan Dry Cool 故障类型Heat Fan Dry Cool 故障类型Heat Fan Dry Cool9 L1 c6 f3 x5 D7 y/ O4 C5 Y9 ~, c室外温度传感器故障闪闪闪闪室内水泵故障闪闪亮闪压力过高或过低闪闪灭灭, L- b$ M; [. e! r7 T* X8 J室内温度传感器故障闪闪闪亮压缩机过载闪闪亮亮内外机通讯故障闪灭闪闪( s, p' {2 V8 q' z& t. p2 B& s+ {+ W系统故障闪闪闪灭室外机压力传感器故障闪闪亮灭其他故障闪灭闪亮* {* c8 e! x# K3 ?: `* w( B- e$ E' i; u* T: Z5 F5 i( i m6 y& K0 b( \- g0 i' l' u$ ]0 W) s- J$ m% m+ K6 c, r7 V8 ?6 @' w0 Z/ M0 x3 |% G& A0 {; U) g( j8 v4 }6 r2 d/ e$ j) l! r- b% J W2 P( H2 @* E8 Z+ \1 ?( v5 R* I4 M+ r. K: k2 k9 x3 K6 Z% A9 }$ ` k序号故障代码故障说明序号故障代码故障说明序号故障代码故障说明- M6 G4 U8 W( d, J1 E0 系统故障23 F7 环境温度超出运行允许范围45 16 TH开路/短路（从机3#进盘）( @& K$ T1 J5 c4 _2 E1 TH1开路/短路（排气温度）24 F8 四通阀故障46 17 TH开路/短路（从机3#中盘）! J# E' T2 r: R& C! F3 E2 TH2开路/短路（1#进盘）25 F9 冷媒泄漏47 18 TH开路/短路（从机环境）* {! Q+ e* ~$ e4 E3 TH3开路/短路（1#中盘）26 FA 线控器存贮器故障48 19 TH开路/短路（从机总出盘）- d& A: y% i3 l5 E4 TH4开路/短路（2#进盘）27 FB 水泵故障（内机排水泵）49 1A TH开路/短路（从机过冷出口）6 J c6 {/ M9 C0 }6 E5 TH5开路/短路（2#中盘）28 FC 内外机通讯故障50 1B TH开路/短路（从机过冷回气）9 h Y2 n3 e- ^# ~; J% Q7 E6 TH6开路/短路（3#进盘）29 H0 数码过载51 1C TH开路/短路（从机回气）$ ~7 M5 v9 s3 Z: V6 F8 E7 TH7开路/短路（3#中盘）30 H1 定速1过载52 1F 紧急运行* {/ A- l" N% Z9 E8 TH8开路/短路（环境温度）31 H2 定速2过载53 20 外机存贮器故障/ f. _ N& Z7 |! a' @10 E9 TH9开路/短路（总出盘温度）32 H3 定速3过载54 27 环境温度超出运行允许范围: D' i, z5 w! g4 m$ R% Y 11 EA TH10开路/短路（过冷出口）33 H4 高压过高55 28 四通阀故障9 G! b7 h$ E0 ~1 g' \3 d9 j0 H e5 o12 EB TH11开路/短路（过冷回气）34 H5 高压传感器故障56 29 冷媒泄漏! j" L7 p; V/ @& f3 K13 EC TH12开路/短路（回气）35 H6 排气温度过高57 30 数码过载; ?' ~; @" [& k! G( t* N$ [8 v14 EE 模式冲突36 L0 过热度太小保护58 31 定速1过载) G5 S' u5 v& G7 w+ m" r$ {4 r( u15 EF 紧急运行37 L1 低压过低59 32 定速2过载7 _2 Q: d- w3 q7 I16 F0 外机存贮器故障38 L2 低压传感器故障60 33 定速3过载# X* D- H" T# {0 ]) p# X& q* W# H17 F1 内机进盘传输器故障39 10 系统故障61 34 高压过高; ^7 ?2 n% v2 s; ^) V18 F2 内机中盘传感器故障40 11 TH开路/短路（从机排气）62 35 高压传感器故障h6 j+ k0 b6 Z' I% B+ `19 F3 内机出盘传感器故障41 12 TH开路/短路（从机1#进盘）63 36 排气温度过高' W* q, b1 c- e20 F4 内机回风传感器故障42 13 TH开路/短路（从机1#中盘）64 40 过热度太小保护2 @6 R6 ?0 H6 L! [$ ]21 F5 内机出风传感器故障43 14 TH开路/短路（从机2#进盘）65 41 低压过低4 Q; e2 U5 _' N22 F6 内机与线控器通讯故障44 15 TH开路/短路（从机2#中盘）66 42 低压传感器故障, y) x. }, _# g/ b8 L* Q. |6 r H4 S" [, U/ n; ^* p本故障代码指通过线控器显示的代码，有上位计算机时直接显示故障原因( t: @: G5 B/ A$ v0 Y代码原因处理/ |2 G/ {& t7 w1 E0 室外机DLT排气温度感温器故障数码压缩机允许最大输出50%% a% {3 d5 b% Q; b @$ t4 w; [; {2 E1 室外机OD环境温度感温器故障制冷时外机高风速；制热时默认为06 p/ {/ u; O! X$ B' x3 E2 室外机RTN回气温度感温器故障-+ k& B: v0 C- r& R* T4 E3 压缩机底部温度感受温器故障-8 d) O" \0 q& S$ z5 E4 室外机Inlet温度感温器故障制冷时报警提示；制热时外机电子膨胀阀开到固定开度, Y9 {- W& N, H6 E5 室外机Midlet温度感温器故障制冷外机风速高；制热模式除霜周期为1小时，除霜进间为5分钟0 l0 r0 E( W0 `: w& h& X7 E6 室外机Outlet温度感温器故障同E4 P$ [( K: P% {5 _; V- g8 E7 室外机DLT排气温度过高（﹥130）停机，系统断电后才能恢复4 l2 q* O4 f! g7 M9 E8 系统故障停机，系统断电后才能恢复7 j6 @4 d6 E1 q% ~8 U2 L. u10 EE 模式冲突与室外机运行模式冲突的停止* y# ?5 `: x# {* H1 J1 m/ q11 E9 水泵故障停内机9 l8 h/ U, y( D8 e 12 F1 室内环境温度感温器故障室内机容量需求为50%& o8 U% n5 C K: G8 T13 F2 室内Inlet温度感温器故障室内机电子膨胀阀开到初始开度/ F/ V* i' J( G8 Z( Y4 l14 F3 室内Midlet温度感温器故障室内机电子膨胀阀开到初始开度' B2 a+ Q3 z2 \' ?. A5 z' j1 E; L15 F4 室内Outlet温度感温器故障室内机电子膨胀阀开到初始开度6 v% K) A4 k- y) v16 F5 室内机与线控器通讯故障故障提示，可自动恢复, `& e- ]' c: d" D0 R( [+ K17 F6 线控器存储器故障按默认数据处理* c( s6 ^, w; [- y18 F7 线控器时钟故障故障恢复可清除报警指示/ K: @( d1 {% Y' {; d" a2 j19 F8 室内机与室外机通讯故障停机保护3分钟，可自动恢复! ?. ] J0 K7 S20 F9 室外机存储器故障提示故障并按默认参数运行. j* T1 ^+ e! |( F5 Y21 H1 压缩机高压故障停机保护3分钟，一小时内出现3次则提示E8，并保护' H7 o6 {4 O& E# K p9 E22 H2 数码压缩机过载同H12 B9 H8 r/ v F M+ p$ O( }$ g# x1 T23 H3 定容压缩机过载同H1L1 压缩机低压故障同H1225 CX 内机与外机通讯故障X为内机号，X为“－”时表示外机与所有内机都有通讯故障外机数码管显示的故障代码总表.序号故障代码故障说明故障处理EC00 0#内外机通讯故障1～47 ECXX XY#内外机通讯故障ER48 数码过载ER49 定速1过载ER50 定速2过载风机故ER51 定速3过载ER52 高压过高ER53 低压过低ER54 存贮器故障（外机）ER55 系统故障停机.ER56 排气温度过高ER57 内外机通讯故障ER58 四通阀故障ER59 环境温度超出运行允许范围ER60 紧急运行ER61 过热度太小保护ER62 冷媒泄漏ER63 从机通讯故障ER64 TH1开路/短路（排气温度）ER65 TH2开路/短路（1#进盘）ER66 TH3开路/短路（1#中盘）ER67 TH4开路/短路（2#进盘）ER68 TH5开路/短路（2#中盘）ER69 TH6开路/短路（3#进盘）ER70 TH7开路/短路（3#中盘）ER71 TH8开路/短路（环境）ER72 TH9开路/短路（总出盘）+ X" A) @* S# N. s+ R5 f7 } ER73 TH10开路/短路（过冷进）2 O3 U$ l% @; ~! z ER74 TH11开路/短路（过冷出）/ R& t, R0 M. j/ Z6 ] ER75 TH12开路/短路（回气）& j+ s( P$ ~! J* M; P" S4 O ER76 高压传感器故障3 h ]& E- C4 [. q+ l$ d) V ER77 低压传感器故障- Z# E1 o; s' k! w1 u- gER78 所有内外机通讯都有故障本文来自[url=]空调之家[/url] 详细出处请参考：/thread-128-1-1.html。
欧姆杰电磁器件有限公司产品说明书
Dimensions: [mm]sectional drawing A-AScale - 2:1Product Marking:Start of Winding•7447452683744745268374474526837447452683T e m p e r a t u r eT T T 7447452683Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TI of Würth Elektronik eiSos GmbH & Co. KG:General:•This electronic component was designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The customer is responsible for the functionality of their own products. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the costumer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects. Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals might result in audible noise due to the magnetostrictive material properties. •Due to heavy weight of the components, strong forces and high accelerations might have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•Please be aware that products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect.•The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi002.0072019-08-05DIN ISO 2768-1mDESCRIPTIONWE-TI Radial Leaded Wire WoundInductor ORDER CODE7447452683SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi002.0072019-08-05DIN ISO 2768-1mDESCRIPTIONWE-TI Radial Leaded Wire WoundInductor ORDER CODE7447452683SIZE/TYPE BUSINESS UNIT STATUS PAGE。
伊玛产品类别
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1108
智慧型
7 LED
内螺纹
G 1/4
400 bar
四线
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1109
智慧型
7 LED
内螺纹
G 1/4
2 bar
四线
18~36 VDC
200
60
M12
接插件
N
Y
N
IP67
否
IA0031
齐平
brass
10~36VDC
1
两线
NO
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0032
齐平
brass
10~36VDC
1
两线
NC
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0033
非齐平
brass
10~36VDC
可
TA1099
智慧型
7 LED
内螺纹
M18 X 1.5
-40~150°C
四线
20~30 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
产品类别
压力变送器(模拟量输出)
压力变送器(开关量输出)
订货号
功能
显示
牙口形式
恩尼特克 型号对照表
TA 1-lock 5.0AK 100/..DS-5,0-VTA 1-lock 5.08AKZ 120/..DS-5.08-V TA 1-lock 7.5AK 110/..DS-7.5-VVA 1-lock 5.0AK 104/..DS-5,0-VVA 1-lock 7.5AK 114/..DS-7,5-VTB 2-lock 5.0AK 100/..DS-5,0-HTB 1-lock 5.08AKZ 120/..-DS-5,08-H TC 1-lock 5.0AK(Z) 500/..-DS-5,0-V TC 2-lock 5.0AK 500/..-DS-5,0-V TC 2-lock 5.08AK(Z) 500/..-DS-5,08-VTD 2-lock 5.0AK(Z) 500/..-DS-5,0-H TE 3.5AK(Z) 550/..-DS-3.5-V TF 3.5AK(Z) 550/..-DS-3.5-H T5 3.5 Solid BlockT3 2-lock180DT3 90DT4 5.0T4 7.50TR 5.0 180D FRONT 2,5-H/SA 5-EX..AK 2200/..-5,0-HTR 5.0 90D FRONT 2,5-V/SA 5 EX..AK 2200/..-5,0-VTR 7.5 180D AK 2200/..-7,5-HTR 7.5 90D AK 2200/..-7,5-VTR 10.0 180D AK 2200/..-10,0-H TR 10.0 90D AK 2200/..-10,0-VKH6.35FRONT4..-6.35KH7.62FRONT4..-7.62VY 5.0 HI-Temp AK 590/..DS-5,0VY 5.0 NL66 AK 590/..DS-5,0KY 5.0 180D PT 1.5/…-5.0-HKY 5.0 90D PT 1.5/…-5.0-VKZ 3.5 45D PTA 1.5/…-3.5KZ 5.0 45D PTA 1.5/…-5.0T2 5.0 45D SMKDSP 1.5/..T2 5.0 -solid block SMKDSP 1.5/..T2 5.08 -solid block SMKDSP 1.5/..-5,08TI 5.0TI7.5VI 5.0 180D MKDS 1,5/..AK(Z) 350/..-5,0-VVI 5.0 90D AK (Z)350/..-5,0-HVI 5.08 180D MKDS 1,5/..-5,08AK(Z) 350/..-5,08-V VI 5.08 90D AK(Z) 350/..-5,08-H VI 7.5 180D GMKDS 1,5/..AK 360/..-7,5-VVI 7.5 90D AK 360/..-7,5-HTO 5.0MKDSN 1,5/..ED-3.81AK(Z)602/..3.81-V YC 5.08MKDSN 1,5/..-5,08AK(Z) 250/..-5,08-V YD 5.0MKDSP 1,5/..YD 5.08MKDSP 1,5/..-5,08VJ 5.0 180D MKDS 3/..AK(Z) 700/..-5,0-V VJ 5.0 90D AK (Z)700/..-5,0-H VJ 5.08 180D MKDS 3/..-5,08AK(Z)700/..-5,08-V VJ 5.08 90D AK(Z) 700/..-5,08-H VJ 7.5 180D AK(Z)710/..-7,5-VVJ 7.5 90D AK(Z)710/..-7,5-HVJ 7.62 180D GMKDS 3/..AK(Z) 710/..-7,62-V VJ 7.62 90D AK(Z)710/..-7,62-H ED500RDT-123RA-..P3DT-128V-DT-128V-..P3 ED500VDT-123RA 166-..P3166DT-126VP ED350VED508VELK508V-..P EK508VDT-126RPEK508AEK500AEK500AEK500VYE 5.0YE 5.08YL- L(YD+YE) 5.0YL- R(YD+YE) 5.0MKKDS 1,5/..AK 370/..-5,0-VYL- L(YD+YE) 5.08YL- R(YD+YE) 5.08MKKDS 1,5/..-5,08YB-5.08(Solid block) MK3DSN1.5YO 3.5MKDS 1/..-3,5YO 3.81MKDS 1/..-3,81YP 3.5YP 3.81YQ- L(YO+YP) 3.5MKKDS 1/..-3,5YQ -R(YO+YP) 3.5MKKDS 1/..-3,5YQ- L(YO+YP) 3.81MKKDS 1/..-3,81YQ- R(YO+YP) 3.81MKKDS 1/..-3,81YA Triple (S-block) 3.81MK3DS 1YA3.81(Stackable)MK3DS1YF 5.0YF 5.08YM- L(YE+YF) 5.0YM- R(YE+YF) 5.0YM- L(YE+YF) 5.08YM- R(YE+YF) 5.08YN Triple 5.0YN Triple 5.08YH 5.0/5.08 MK3DS 3/..5.08AKZ770/..-5,08-V EHK508V3L YT 5.0/5.08MK4DS1.5YI 5.0/5.08VV 6.35MKKDS 5/..-6,35VV 9.52MKKDS 5/..-9,5YS 5.0MKKDSN 1.5/YS 5.08MKKDSN 1.5/..-5,08VQ 3.5 DIP SOLDER AKZ 602/..-3,5-VVQ 3.81 DIP SOLDER AKZ 602/..-3,81-VTV 3.5 45D SMKDS 1/..-3,5TV 3.81 45D SMKDS 1/..-3,81KP 6.35MKDS 5HV/..-ZB-6.35KP 10.16(Double interlace )MKDS 10HV/..-ZB-10.16KP 10.16(Front single row)MKDS 10HV/..-B-10.16KP 10.16( Back single row)MKDS 10HV/..-F-10.16T7 6.35MKDS 5/..-6,35T7 6.35 45D SMKDS 5/..-6.35T7 7.62MKDS 5/..-7,62KO 9.52(Back single row)MKDS 5HV/..-9.52KO 9.52(Interlace tail)MKDS 5HV/..-9.52-ZT7 9.52 180D MKDS 5/..-9,5T7 9.52 45D SMKDS 5/..-9,5KQ 10.16MKDSP10HV..-10.16VP 10.16(Single tail)MKDSP10HV..-10.16VP 12.7MKDSP10HV..-12.7EI 15.00MKDSP 25/..-15EI 15.00 W/F MKDSP 25/..-15-FEK 5.08MKDS 3/..-5,08VN 2.54MPT 0,5/..-2,54 VT 5.08KDS 3-MTV4 Solid Block G 10/...E4 Solid Block G 5/...EK254V EHK508V ESK950V ESK116V EELK508V-..P EK381AEK350A ESK762V ESK635V EK508V3L EK500V3L EK508V2L EK508V2R EK500V2L EK500V2R EEK350VE3K500V EK371V3L EK381V4L EK381V4R EK350V4L EK350V4R EK350VEK508V4L EK508V4R EK500V4L EK500V4R EEK508V EK381V EEK500VE3K508V EEK381V ESK116VES 5.0MKDSFW1.5EB 5.0 Interlace MKKDS3/..AK(Z)750/..-5.0-V EB 5.08 Interlace MKKDS3/..-5.08AK(Z)750/..-5.08-V EEHK508VEB 5.0 Parallel MKKDSG 3/..AK790/..-5.0-V EB 5.08 Parallel MKKDSG 3/..-5.08AK790/..-5.08-VES 5.0MKDSFW1,5/..TI 7.62GMKDS1,5/..-7,62TG 5.0 45D AK (Z)300/..-5,0TG 5.08 45D AK(Z) 300/..-5,08TV 5.0 45D SMKDSN 1.5/..E6 5.0 RIGHT MKDSO 2.5/…-L E6 5.0 LEFT MKDSO 2.5/…-RTH 5.0AK 130/..-5,0TH 5.0Solid Block AK(Z) 130/..-5,0EH 3.5AK 1300/..-3,5OP/(EH) 3.5STL 1300/..-3,5-V OP 12.5 5.0STL 130/..-5,0-V OP 5.0 Bend pin STL 1340/..-5,0-H TJ 3.5MC 1,5/..-ST-3,5AK 1550/..-3,5TJ 3.5 W/F MC 1,5/..-STF-3,5AK 1550/..F-3,5TJ 3.81MC 1,5/..-ST-3,81AKZ 1550/..-3,81TJ 3.81 W/F MC 1,5/..-STF-3,81AKZ 1550/..F-3,81TJ 5.0MSTB 2,5/..-ST AK 950/..-5,0TJ 5.0 W/F MSTB 2,5/..-ST AK 950/..-F-5,0TJ 5.08MSTB 2,5/..-ST-5,08AKZ 950/..-5,08TJ 5.08 W/F MSTB 2,5/..-STF-5,08AKZ 950/..-F-5,08TJ 7.5GMSTB 2,5/..-ST TJ 7.5 W/F GMSTB 2,5/..-STF TJ 7.62GMSTB 2,5/..-ST-7,62AKZ 960/..-7,62TJ 7.62 W/FGMSTB 2,5/..-STF-7,62AKZ 960/..-F-7,62VR 5.08(contact down side)MC 1,5/..-STI-5.08VR 5.08 W/F(contact down side)MC 1,5/..-STIF-5.08VR 5.08(contact up side)MC 1,5/..-ST-5.08VR 5.08 W/F(contact up side)MC1,5/..-STF-5.08VS 5.08 180D MCV 1,5/..-G-5.08VS 5.08 W/F 180D MCV 1,5/..-GF-5.08VS 5.08 90D MC 1,5/..-G-5.08VS 5.08 W/F 90D MC 1,5/..-GF-5.08VH 5.08TMSTBP 2,5/..-ST-5,08VH 5.08 W/F TMSTBP 2,5/..-STF-5,08OQ 2.5 180D MCV 0,5/..-G-2.5OQ 2.5 90D MC 0,5/..-G-2.5OQ 3.5 180D MCV 1,5/..-G-3.5STL 1550/..G-3,5-V OQ 3.5 180D (W/F) MCV 1,5/..-GF-3.5STL 1550/..F-3,5-V OQ 3.5 90D MC 1,5/..-G-3.5STL 1550/..G-3,5-H OQ 3.5 90D (W/F) MC 1,5/..-GF-3.5STL 1550/..F-3,5-H OQ 3.81 180D MCV 1,5/..-G-3.81STLZ 1550/..G-3,81-V OQ 3.81 180D (W/F) MCV 1,5/..-GF-3.81STLZ 1550/..F-3,81-V OQ 3.81 90D MC 1,5/..-G-3.81STLZ 1550/..G-3,81-H OQ 3.81 90D (W/F) MC 1,5/..-GF-3.81STLZ 1550/..F-3,81-H OQ 5.0 180D (Open) MSTBV 2,5/..-G STL 950/..-5,0-V OQ 5.0 180D (Close) MSTBVA 2,5/..-G STL 950/..-G-5,0-V OQ 5.0 180D (W/F) MSTBV 2,5/..-GF STL 950/..-F-5,0-V OQ 5.0 90D (Open)MSTB 2,5/..-G STL 950/..-5,0-H OQ 5.0 90D (Close)MSTBA 2,5/..-G STL 950/..-G-5,0-H OQ 5.0 90D (W/F)MSTB 2,5/..-GFSTL 950/..-F-5,0-H5EHDRM5EHDRC 5EHDR 5EHDVM 5EHDVC 5ESDV 3ESDVM 3ESDV 7ESDVM 7ESDV 2ESDVM 2ESDV 5ESDVM ECH350RM ECH350R ECH350VM 5EHDV ECH381RM ECH381R ECH381VM ECH381V EC381VM EC381V EC350VM EC350V EDH130ED130ECH350V ECH250R ECH250VOQ 5.08 180D (Open) MSTBV 2,5/..-G-5,08STLZ 950/..-5,08-V OQ 5.08 180D (Close) MSTBVA 2,5/..-G-5,08STLZ 950/..-G-5,08-V OQ 5.08 180D (W/F) MSTBV 2,5/..-GF-5,08STLZ 950/..-F-5,08-V OQ 5.08 90D (Open MSTB 2,5/..-G-5,08STLZ 950/..-5,08-H OQ 5.08 90D (Close) MSTBA 2,5/..-G-5,08STLZ 950/..-G-5,08-H OQ 5.08 90D (W/F) MSTB 2,5/..-GF-5,08STLZ 950/..-F-5,08-HOQ 7.5 180D (Open) GMSTBV 2,5/..-G OQ 7.5 180D (Close)GMSTBVA 2,5/..-G OQ 7.5 180D (W/F) GMSTBV 2,5/..-GF OQ 7.5 90D (Open)GMSTB 2,5/..-G OQ 7.5 90D (Close) GMSTBA 2,5/..-G OQ 7.5 90D (W/F) GMSTB 2,5/..-GF OQ 7.62 180D (Open) GMSTBV 2,5/..-G-7,62STLZ 960/..-7.62-V OQ 7.62 180D (Close) GMSTBVA 2,5/..-G-7,62STLZ 960/..-G-7.62-VOQ 7.62 180D (W/F) GMSTBV 2,5/..-GF-7,62OQ 7.62 90D (Open) GMSTB 2,5/..-G-7,62STLZ 960/..-7.62-H OQ 7.62 90D (Close) GMSTBA 2,5/..-G-7,62STLZ 960/..-G-7.62-H OQ 7.62 90D (W/F) GMSTB 2,5/..-GF-7,62VK 3.5 45D SMC 1,5/..-G-3,5VK 3.5 45D (W/F) SMC 1,5/..-GF-3,5VK 3.81 45D SMC 1,5/..-G-3,81STLZ 1590/..G-3,81VK 3.81 45D (W/F) SMC 1,5/..-GF-3,81STLZ 1590/..F-3,81VK 5.0 45D (Open) SMSTB 2,5/..-G VK 5.0 45D (Close) SMSTBA 2,5/..-G VK 5.0 45D (W/F) SMSTB 2,5/..-GF VK 5.08 45D (Close)SMSTB 2,5/..-G-5,08STLZ 990/..G-5,08VK 5.08 45D (W/F) SMSTBA 2,5/..-G-5,08VK 5.08 45D (Open)SMSTB 2,5/..-GF-5,08VB 7.62PC 4/..-ST-7,62VB 7.62 (W/F)PC 4/..-STF-7,62VC 7.62 90D PC 4/..-G-7,62VC 7.62 90D(W/F)ECH762RM VC 7.62 180D PCV 4/..-G-7,62VC 7.62 180D(W/F)ECH762VM ET-7.62PC 5/..-ST-7,62ET-7.62 (W/F)PC 5/..-STF-7,62ET 7.62 flange with screw(with handle)PC 5/..-STF-SH-7.62EV-10.16PC 16/..-ST-10.16EC116VEV-10.16(W/F)PC 16/..-STF-10.16EV 10.16 flange with screw(with handle)PC16/..-STF-SH-10.16EW-10.16 180D PCV6-16/..-G1-10.16EW-10.16(W/F) 180D PCV6-16/..-G1F-10.16EW-10.16 90D(down)PC6-16/..-G1-10.16ECH116R EW-10.16 90D(up)PC6-16/..-G1U-10.16ECH116LEW-10.16 (W/F)90D(down)PC6-16/..-G1F-10.16EW-10.16(W/F) 90D(up)PC6-16/..-G1FU-10.16TJ 5.0 Contact on up side MSTBT2.5/..-ST TJ 5.0 Contact on up side(W/F)MSTBT2.5/..-STF TJ 5.08 Contact on up side MSTBT2.5/..-ST-5.08TJ 5.08 Contact on up side(W/F)MSTBT2.5/..-STF-5.08V9 5.08 W/O Flange fixed typeMSTBU2.5/..-STD-5.08V9 5.08 dinrail holder B type w/o flangeUMSTBVK2.5/..-ST-5.08V9 5.08 dinrail holder B type with flang UMSTBVK2.5/..-STF-5.08TJ 3.5/3.81 with handle AK(Z)1550TJ 5.0 with handle MSTB2.5/..-STZ AK(Z)950TJ5.08 with handle MSTB2,5/..-STZ-5.08AK(Z)950VB 7.62 with flangePC4/..-STF-7.62EC762V EC762VM ECH762R ECH762V 3EHDRM3EHDRC 3EHDVC 3EHDV 7EHDRM 3EHDR 3EHDVM 7EHDRC 7EHDR 7EHDVM 7EHDVC 7EHDV 2EHDRM 2EHDRC 2EHDR 2EHDVM 2EHDVC 2EHDV 5ESDTVC 7.62 with flange DFK-PC4/..-G-7.62-FS4,8VC 7.62 flange with Nut PC4/..-G-7,62TS A 3.5MCVR 1,5/..-ST-3,5TS A 3.5 (W/F) MCVR 1,5/..-STF-3,5TS B 3.5MCVW 1,5/..-ST-3,5TS B 3.5 (W/F)MCVW 1,5/..-STF-3,5TS A 3.81MCVR 1,5/..-ST-3,81AKZ 1700/..-3,81 TS A 3.81 (W/F)MCVR 1,5/..-STF-3,81AKZ 1700/..F-3,81 TS B 3.81MCVW 1,5/..-ST-3,81AKZ 1710/..-3,81 TS B 3.81 (W/F) MCVW 1,5/..-STF-3,81AKZ 1710/..F-3,81 TS A 5.0MVSTBR 2,5/..-ST AK 1100/..-5,0 TS A 5.0 (W/F) MVSTBR 2,5/..-STFTS B 5.0MVSTBW 2,5/..-ST AK 1110/..-5,0TS B 5.0 (W/F) MVSTBW 2,5/..-STFTS A 5.08MVSTBR 2,5/..-ST-5,08AKZ 1100/..-5,08 TS A 5.08 (W/F)MVSTBR 2,5/..-STF-5,08TS B 5.08MVSTBW 2,5/..-ST-5,08AKZ 1110/..-5,08 TS B 5.08 (W/F)MVSTBW 2,5/..-STF-5,08TS A 7.5GMVSTBR 2,5/..-STTS A 7.5 (W/F) GMVSTBR 2,5/..-STFTS B 7.5GMVSTBW 2,5/..-STTS B 7.5 (W/F) GMVSTBW 2,5/..-STFTS A 7.62GMVSTBR 2,5/..-ST-7,62TS A 7.62 (W/F)GMVSTBR 2,5/..-STF-7,62TS B 7.62GMVSTBW 2,5/..-ST-7,62TS B 7.62 (W/F) GMVSTBW 2,5/..-STF-7,62VM 3.81FRONT-MC 1,5/..-ST-3,81VM 3.81 W/F FRONT-MC 1,5/..-STF-3,81VM 5.0FRONT-MSTB 2,5/..-STVM 5.0 W/F FRONT-MSTB 2,5/..-STFVM 5.08AKZ 1200/..-5,08 VM 5.08 W/F FRONT-MSTB 2,5/..-STF-5,08AKZ 1200/..F-5,08 VM 5.08-low FRONT-MSTB 2,5/..-ST-5,08VM 7.62 FRONT-GMSTB 2,5/..-STVM 7.62 W/F FRONT-GMSTB 2,5/..-STFEM 5.0SMSTB 2,5/..-STEM 5.0 W/F SMSTB 2,5/..-STFEM 5.08SMSTB 2,5/..-ST-5,08EM 5.08 W/F SMSTB 2,5/..-STF-5,08EM 7.5GSMSTB 2,5/..-STEM 7.5 W/F GSMSTB 2,5/..-STFEM 7.62GSMSTB 2,5/..-ST-7,62EM 7.62 W/F GSMSTB 2,5/..-STF-7,62VL 2.5 180D MCDV 0,5/..-G1-2,5VL 2.5 90D MCD 0,5/..-G1-2,5VL 3.5 180D (B type)VL 3.5 180D W/F(B type)VL 3.5 90D (B type)VL 3.5 90D W/F(B type)VL 3.81 180D MCDV 1,5/..G1-3.81VL 3.81 180D W/F MCDV 1,5/..G1F-3.81VL 3.81 90D MCD 1,5/..G1-3.81VL 3.81 90D W/F MCD 1,5/..G1F-3.81VL 5.0 180D MDSTBV 2,5/..-G1STL 975/..G-5,0-V VL 5.0 180D (W/F)MDSTBV 2,5/..-G1FVL 5.0 90D MDSTB 2,5/..-G1STL 975/..G-5,0-H VL 5.0 90D(W/F) MDSTB 2,5/..-G1F ECHB381R ECHB350V ECHB381VM ECHB381V 2ESDFM ECHB350VM ECHB350RM ECHB381RM 5EHDBR5EHDBV5EHDBVM 2ESDAM2ESDAEC381REC350RLM EC350RL EC350RM EC350R5ESDP2ESDPLMECHB350R 5EHDBRM 2ESDPLM 2ESDPL7ESDPL7ESDPM EC381RM2ESDP3ESDPEC381RLM 5ESDPLM 5ESDPL5ESDPM7ESDPLM EC381RL7ESDP2ESDF5ESDFM5ESDF3ESDPLM 3ESDPL3ESDPMVL 5.08 180D MDSTBV 2,5/..-G1-5,08VL 5.08 180D(W/F)MDSTBV 2,5/..-G1F-5,08VL 5.08 90D MDSTB 2,5/..-G1-5,08VL 5.08 90D(W/F) MDSTB 2,5/..-G1F-5,08VO 3.5 180D MCDV 1,5/..-G-3,5VO 3.5 90D MCD 1,5/..-G-3,5VO 3.5 180D (W/F) MCDV 1,5/..-GF-3,5VO 3.5 90D (W/F) MCD 1,5/..-GF-3,5VO 3.81 180D MCDV 1,5/..-G-3,81STLZ 1570/..G-3,81-V VO 3.81 180D (W/F) MCD 1,5/..-G-3,81VO 3.81 90D MCDV 1,5/..-GF-3,81STLZ 1570/..G-3,81-H VO 3.81 90D (W/F) MCD 1,5/..-GF-3,81VF 5.0 180D Open MDSTBV 2,5/..-GVF 5.0 180D Close MDSTBVA 2,5/..-GVF 5.0 180D W/F MDSTBV 2,5/..-GFVF 5 .0 90D Open MDSTB 2,5/..-GVF 5.0 90D Close MDSTBA 2,5/..-GVF 5.0 90D W/F MDSTB 2,5/..-GFVF 5.08 180D Open MDSTBV 2,5/..-G-5,08STLZ 970/..-5,08-V VF 5.08 180D Close MDSTBVA 2,5/..-G-5,08VF 5.08 180D W/F MDSTBV 2,5/..-GF-5,08STLZ 970/..-F-5,08-V VF 5.08 90D Open MDSTB 2,5/..-G-5,08STLZ 970/..-5,08-H VF 5.08 90D Close MDSTBA 2,5/..-G-5,08VF 5.08 90D W/F MDSTB 2,5/..-GF-5,08STLZ 970/..-F-5,08-H VZ 3.81DFK-MC 1,5/..-GF-3,81VZ 5.08DFK-MSTB 2,5/..-GFV7 3.5 180D IMCV 1,5/..-GV7 3.5 180D (W/F) IMCV 1,5/..-GFV7 3.5 90D IMC 1,5/..-GV7 3.5 90D (W/F) IMC 1,5/..-GFV7 3.81 180D IMCV 1,5/..-G-3,81V7 3.81 180D (W/F)IMCV 1,5/..-GF-3,81V7 3.81 90D IMC 1,5/..-G-3,81V7 3.81 90D (W/F) IMC 1,5/..-GF-3,81V7 5.0 180D ICV 2,5/..-GV7 5.0 180D (W/F) ICV 2,5/..-GFV7 5.0 90D IC 2,5/..-GV7 5.0 90D (W/F) IC 2,5/..-GFV7 5.08 180D ICV 2,5/..-G-5,08V7 5.08 180D (W/F) ICV 2,5/..-GF-5,08V7 5.08 90D IC 2,5/..-G-5,08V7 5.08 90D (W/F) IC 2,5/..-GF-5,08V7 7.5 180D GICV 2,5/..-GV7 7.5 180D (W/F) GICV 2,5/..-GFV7 7.5 90D GIC 2,5/..-GV7 7.5 90D (W/F)GIC 2,5/..-GFV7 7.62 180D GICV 2,5/..-G-7,62V7 7.62 180D (W/F) GICV 2,5/..-GF-7,62V7 7.62 90D GIC 2,5/..-G-7,62V7 7.62 90D (W/F) GIC 2,5/..-GF-7,62EU-5.0-3P Right MSTBO2.5/3-6ST SET KMGY(Left)EU-5.0-3P Left MSTBO2.5/3-6ST SET KMGY(Right)EU-5.0-4P Right MSTBO2.5/4-6ST SET KMGY(Left)EU-5.0-4P Left MSTBO2.5/4-6ST SET KMGY(Right)V5 5.08 Bottom cover fixed type MVSTBU2.5/..-GB AKZS950/..GMB-5.08 V5 5.08 (W/F)Bottom cover fixed type MVSTBU2.5/..-GFBV5 5.08 Dinrail holder A type MSTBVK2,5/..-G-5.082ESDCV2ESDCRMZEHDRSMZEHDRS 2EEHDV2ESDCVMEECH381RM2EEHDR5EEHDRM5EEHDVECHP381VEECH350VMEECH350RMEECH381VEECH350REECH350V2EHDBRMEECH381VM2EHDBR5EEHDR2EEHDRM2EHDPEECH381R2EHDBVM2EHDBV5EEHDVM2EEHDVM2ESDCRV5 5.08 (W/F)Dinrail holder A type MSTBVK2,5/..-GF-5.08V5 5.08 Dinrail holder B type UMSTBVK2,5/..-G-5,08AKZS950/..G-5.08 V5 5.08 (W/F)Dinrail holder Btype UMSTBVK2,5/..-GF-5,08AKZS950/..F-5.08 KE 3.5 Close Vertical MCDNV1,5..-G1-3,5 P26THRKE 3.5 Close Right Angle MCDN1,5..-G1-3,5 P26THRKE 3.5 with holder Vertical MCDNV1,5..-G1-3,5 RNP26THRKE 3.5 with holder Right Angle MCDN1,5..-G1-3,5 RNP26THRKE 5.0 W/O FLANGE CCDN 2.5/…-G1 P26KE 5.0 W/FLANGE CCDN 2.5/…-G1F P26KK 10.16IPC 16..-ST-10,16KK 10.16 flange wih screw IPC 16..-STF-10,16KK 10.16 flange with screw (with handle IPC 16/..-STF-SH-10.16KK 10.16 flange with nut IPC 16/..-STGF-10.16KK 10.16 flange with nut (with handle)IPC 16/..-STGF-SH-10.16KL 10.16mm close Vertical IPCV 16/..-G-10,16KL 10.16 W/F close Vertical IPCV 16/..-GF-10,16KL 10.16 close Right angle(up)IPC 16/..-G-10,16KL 10.16 W/F close Right angle (up)IPC 16/..-GF-10,16KL 10.16 close Right angle(down)IPC 16/..-GU-10,16KL 10.16 W/F close Right angle (down)IPC 16/..-GUF-10,16KJ10.16PCU 6/..-STD-10,16V5 3.81(W/F)Bottom cover fixed type MCVU1,5/-GFD-3,81V8 3.81 w/o flange IMC1,5/..-ST-3,81V8 3.81 flange with Nut IMC1,5/..-STGF-3,81V8 5.08 w/o flange IC2,5/..-ST-5,08V8 5.08 flange with Nut IC2,5/..-STGF-5,08V8 5.08 flange with Screw IC2,5/..-STF-5,08V8 7.62 w/o flange GIC2,5/..-ST-7,62V8 7.62flange with Nut GIC2,5/..-STGF-7,62V8 7.62 flange with Screw GIC2,5/..-STF-7,62KF-3.5ZEC1,0/..-LPV-3,5KF-5.0ZEC1,0/..-LPV-5.0KF-7.5ZEC1,0/..-LPV-7,5KI3.81 W/O Flange MCC 1/..-STZ-3.81KI3.81 W/Flange MCC 1/..-STZF-3.81KI5.08 W/O Flange MSTBC 2.5/..ST-5.08KI5.08 W/Flange MSTBC 2.5/..STZF-5.08KV 5.08 W/Hook latch ICC 2.5/…-STZ-5.08KV 5.08 W/Flange Screw ICC 2.5/…-STZF-5.08KT 7.62 W/o flange IPC 5/…-ST-7.62KT 7.62 W/flange screw IPC 5/…-STF-7.62KT 7.62 W/flange and handle IPC 5/…-STF-SH-7.62KT 7.62 W/flange nut IPC 5/…-STGF-7.62KS 7.62 180D W/o flange IPCV 5/…-G-7.62KS 7.62 180D W/flange IPCV 5/…-GF-7.62KS 7.62 90D W/o flange PCB up IPC 5/…-G-7.62KS 7.62 90D W/o flange PCB down IPC 5/…-GU-7.62KS 7.62 90D W/flange PCB up IPC 5/…-GF-7.62KS 7.62 90D W/flange PCB down IPC 5/…-GFU-7.62VC 7.62 180D W/o flange B type PCV 5/…-G-7.62VC 7.62 180D W/flange B type PCV 5/…-GF-7.62VC 7.62 90D W/o flange PCB up PC 5/…-G-7.62VC 7.62 90D W/o flange PCB down PC 5/…-GU-7.62VC 7.62 90D W/flange PCB up PC 5/…-GF-7.62VC 7.62 90D W/flange PCB down PC 5/…-GUF-7.62KU 15.0 180D PCV 35 HC/…-GF-15.00KU 15.0 90D PC 35 HC/…-GF-15.00KU 15.0 90D With shield PC 35 HC/…-GF-SH-15.00KX 15.0 W/F PC 35 HC/…-STF-15.00KX 15.0 W/Handle(shield)PC 35 HC/…-STF-SH-15.00EU 3.5 Right MCO 1.5/…-G1R-3.5 KMGYEU 3.5 Left MCO 1.5/…-G1L-3.5 KMGYHI 5.0 -hook&Pillar AK 3950/..-5,0WAGO 2310134-12 HI 5.0 -W/Flange WAGO 231HI 5.0 -W/locking WAGO 2310134-14 HI 5.0 -100% protected against mismating WAGO 721HI 7.5 -hook&Pillar WAGO 2310134-32 HI 7.5 -W/Flange WAGO 231HI 7.5 -W/locking WAGO 2310134-34 HI 7.5 -100% protected against mismating WAGO 721HP 3.81QC 0,5/..-ST-3,81HP 3.81 W/F QC 0,5/..-STF-3,81HP 5.08QC 1/..-ST-5,08HP 5.08 W/F QC 1/..-STF-5,08HW 2.5FK-MC 0,5/..-ST-2,5ESC250V HW 3.5 w/o flange FK-MCP1,5/..-ST-3.5HW3.5 with flange FK-MCP1,5/..-STF-3.5HW 3.81FK-MCP 1,5/..-ST-3,81HW-3.81 W/F FK-MCP 1,5/..-STF-3,81ESC381VM HW 5.08 Contact on down side FKC 2,5/..-ST-5,08HW-5.08 W/F Contact on down side FKC 2,5/..-STF-5,08HW 5.08Contact on up side FKCT 2,5/..-ST-5,082ESDS HW-5.08 W/FContact on up side FKCT 2,5/..-STF-5,08HW 5.0 Contact on down side FKC 2,5/..-ST-5,0HW-5.0 W/F Contact on down side FKC 2,5/..-STF-5,0HW 5.0Contact on up side FKCT 2,5/..-ST-5,0HW-5.0 W/FContact on ip side FKCT 2,5/..-STF-5,0HW -7.5GFKC2,5/..-ST-7.5HW 7.5-W/F GFKC2,5/..-STF-7.5HW 7.62GFKC2,5/..-ST-7.62HW-7.62 W/F GFKC2,5/..-STF-7.62H4 5.0-A FKCVR 2,5/..-STH4 5.0-A W/F FKCVR 2,5/..-STFH4 5.0-B FKCVW 2,5/..-STH4 5.0-B W/F FKCVW 2,5/..-STFH4 5.08-A FKCVR 2,5/..-ST-5,08H4 5.08-A W/F FKCVR 2,5/..-STF-5,05H4 5.08-B FKCVW 2,5/..-ST-5,08H4 5.08-B W/F FKCVW 2,5/..-STF-5,08H5 5.0 w/o flange FKIC2,5/..-STH5 5.0-W/F Screw FKIC2,5/..STFNC 5.0 -Right Angle WAGO 2310135-11 NC 5.0 -Vertical WAGO 2310135-10 NC 5.0 -Right Angle(hook holder)WAGO 7210135-17 NC 5.0 -Vertical(hook holder)WAGO 7210135-16 NC 7.5 -Right Angle WAGO 2310135-31 NC 7.5 -Vertical WAGO 2310135-30 NC 7.5 -Right Angle(hook holder)WAGO 7210135-37 NC 7.5-Vertical(hook holder)WAGO 7210135-36 NB 5.0 w/o flange WAGO 231NB 5.0 with flange WAGO 231NB 5.0 with Hook holder WAGO 721NB 5.0 with Hook holder(w/f)WAGO 721NB 7.5 w/o flange WAGO 731NB 7.5 with flange WAGO 731NB 7.5 with Hook holder WAGO 731NB 7.5 with Hook holder(w/f)WAGO 731H5 5.08 w/o flange FKIC2,5/..-ST-5.08H5 5.08-W/F Screw FKIC2,5/..STF-5,08KD 3.5/3.81FMC1,5/..-ST-3,5KD3.5/3.81 with flange FMC1,5/..-STF-3,5KD 3.5/3.81 with latch FMC1,5/..-ST-3,5-RFKD 5.0/5.08FKCN 2.5/…-STKD 5.0/5.08 with flange FKCN 2.5/…-STFND 3.5ZEC1.5/..-ST-3.5ND 5.0ZEC1.5/..-ST-5.0ND 7.5ZEC1.5/..-ST-7.5HA 2.54 180D FFKDS/H-2,54141RHA 2.54 90D FFKDS/V-2,54141VHA 3.81 180D FFKDS/H-3.81HA 3.81 90D FFKDS/V-3.81HA 5.08 180D FFKDS/H1-5.08142RHA 5.08 90D FFKDS/V1-5.08142VHA 7.62180D FFKDSA/H1-7.62142R-..P3 HA 7.62 90D FFKDSA/V1-7.62142V-..P3 HB 3.81WAGO 235144RA-..P1 HB 3.96WAGO 235HB Single 5.0 (W/Lever)AK 4101/..KD-5,0WAGO 235144RA-..P HB Double 5.0 (W/Lever)WAGO 235244RA HB Single 5.0(W/O lever)AK 4100/..-5,0WAGO 235144R-..P HB Single 7.5 w/lever WAGO 235144RA-..P3 HB Double 7.5 w/lever WAGO 235244RA-..P3 HB Single 7.5(W/O lever WAGO 235144R-..P3 HB Single 10.0 (W/Lever)WAGO 235HB Double 10.0 (W/Lever)WAGO 235HB Single 10.0 (W/O lever WAGO 235HC 2.5PTSA0,5/..-2,5-Z WAGO 2500136-10 HC 3.5PTSA1,5/..-3,5-Z AK 4291/..KDVP-3,5WAGO 2500136-20 HC 7.0WAGO 250HD 5.08MFKDSP/..-5,08AKZ 4301/..-KD-5,08HE 2.5 W/Lever AK(Z) 3191/..-KD-2,5WAGO 233WKA250A HE 2.5 W/O Lever AK(Z) 3191/..-2,5WAGO 233HE 2.54 W/Lever AK(Z) 3191/..-KD-2,54WAGO 233WKA254A HE 2.54 W/O Lever AK(Z) 3191/..-2,54WAGO 233HE 5.0 W/Lever WAGO 233HE 5.08 W/Lever WAGO 233HF 5.0 Low Profile WAGO 735HF 5.0 High profile WAGO 735HG 5.0ZFKDS1,5C-5,0AK 3000/..-5,0WAGO236WKA500 HG 5.08ZFKDS1,5-5,08AK 3000/..-5,08WAGO236WKA508 HG 7.5AK 3000/..-7.5WAGO236WKA750 HG 7.62AK 3000/..-7.62WAGO236WKA762 HG 10.0AK 3000/..-10,0WAGO236WKA100 HG 10.16AK 3000/..-10,16WAGO236WKA116 HH 5.0AK 3100/..-5,0HL 3.5WAGO 251HM 3.81 Dip solder WAGO 739HM 3.81 Press Fit WAGO 739HM 5.0 Dip solder WAGO 739HM 5.0 Press Fit WAGO 739HM 7.5 Dip solder WAGO 739HM 7.5 Press Fit WAGO 739HM 10.0 Dip solder WAGO 739HM 10.0 Press Fit WAGO 739HM 5.08 Dip solder WAGO 739HM 5.08 Press Fit WAGO 739HM 7.62 Dip solder WAGO 739HM 7.62 Press Fit WAGO 739HM 10.16 Dip solder WAGO 739HM 1016 Press Fit WAGO 739HQ 5.08ZFKKDS 1,5-5,08AKZ 3750/..-5,08WAGO 736WKK508 HQ 7.62WAGO 736HQ 10.16WAGO 736HR 5.08ZFK3DS 1,5-5,08WAGO 737W3K508 HR 7.62WAGO 737HR 10.16WAGO 737HT 5.0AK 3001/..KD-5,0WAGO 256WKA500A HT 5.08ZFKDS1,5-W-5,08AK 3001/..KD-5,08WAGO 256WKA508A HT 7.5AK 3001/..KD-7.5WAGO 256WKA750A HT 7.62AK 3001/..KD-7.62WAGO 256WKA762A HT 10.0AK 3001/..KD-10.0WAGO 256WKA100A HT 10.16AK 3001/..KD-10.16WAGO 256WKA116A HV 3.81WAGO 735H2 7.5ZFKDS 4-7,5WAGO 745H2 10.0ZFKDS 4-10WAGO 745H3 5.0WAGO 745H3 7.5WAGO 745H3 10.0WAGO 745H8 10.0ZFKDS10-10.00WAGO 745H8 15.0ZFKDS10-15.00WAGO 745H8 20.0WAGO 745H6 5.0WAGO 804H6 7.5WAGO 804H7 5.0 WAGO 253H7 7.5WAGO 253HS ZFK4DS1.5-5.08WAGO738DS240WAGO 240NE 5.0WAGO 250NE 7.5WAGO 250NH 3.5SPTA 1/…-3.5NH 5.0SPTA 1/…-5.0NI 3.81SPTA 1.5/…-3.81NI 5.08SPTA 1.5/…-5.08ANYTEK PHOENIX CONTACT Phoenix Mecano(PTR)WAGOAI FLRP/ICV(rechts)/(links)AN ME17.5UTR/ME22.5UTRAP CP-HCC4AM MEMAXAD KGS-MSTB 2,5/..AE CP-MSTBAF CR-MSTBAJ WAGO 236-332AK WAGO 231-131AS IC-DFR…AT WAGO 209-13711ANYTEK WECO ANYTEKTQ Solid Block TYPES 974 AND 974-DS HD 5.08 SERIESTZ 5.0 SERIES SMT TYPES 140-A-SMD EQ 5.0 180DTY 5.0 SERIES TYPES 950-NLFL-DS EQ 5.0 90DVG 5.0 SERIES TYPES 954-NLFL-DS ERKR 5.0 Series TYPES 950-FL-DSANYTEK Weidmuller ANYTEKHP 5.08 SERIES BL1DC 5.08TX 5.0 SERIESHN 5.08 SERIES BLZF 5.08EO 5.0 SERIESAH Series SLAT EP 5.0EL 3.5 Series Close SL-SMT3.5/90G or 180G TY 5.0 Solid BlockEL 3.5 Series Open SL-DIP3.5/90 or180EX5.0 SeriesET 7.62BVZ 7.62EZ 5.0ET 7.62 W/F BVZ 7.62F EB 5.0VC 7.62 180D SV 7.62/180EB 5.08H9 5.08AST186ANYTEK Weidmuller ANYTEKVC 7.62 180D W/F SV7.62/180F TT 5.0VC 7.62 90D SV7.62/90YI5.08VC 7.62 90D W/F SV7.62/90F ANYTEKEV 10.16BUZ10.16T4 5.0/7.5/10.0 SERIESEV 10.16 W/F BUZ10.16F ANYTEKEW 10.16 90D(down)SU10.16/270TK 5.0 SERIESEW 10.16 90D(up)SU10.16/90TL 5.0 SERIESEW 10.16 90D W/F(down)SU10.16/270F ANYTEKEW 10.16 90D W/F (up)SU10.16/90F HX 3.5 180D USL-3HB2EW 10.16 180D SU10.16/180HX3.5 90D USL-3VB1EW 10.16 180D W/F SU10.16/180F HX-5.0-180DVP 10.16 SERIES(Single tail)LU 10.16/90 2ST1HX-5.0-90DVP 10.16 (Double tail)LU 10.16/../90VP 12.7 LUP 12.7/90E2BL3.5ANYTEK DINKLE DECA YK30DT-2T21YK 50DT-4T24YK 60DT-5T25YK 21 T30YK 31DT-25T31YK 41 DT-35T32YK 51DT-45T34YK 61DT-55T35YK 42DT-31YK 22DT-29T40YK 33DT-39T42YK 44DT-49T44YK 55DT-69T46YK 662DSCYK 774DSC TS4-2241YK 111~YK114EM-1TE1-1YE11E-4P TEH-1YK50A DT-4YK70T36YK70A DT-66YK9010032-1110YK88DT-79USL-5HB2CUUTYPE 207CUU..SQSTELVIORIA TYPE 157TYPE 07 & TYPE 107 CPP..SQCTLTYPE48TYPE41Lumberg KRESLUSL-5VB1ITW ElettroGiBI PA266TYPE96TYPE97KRESSPSQSEOILSAURO CSFTYPE09。
Dell Networking N1108T-ON N1108P-ON N1108EP-ON N1
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your switch. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Booting the N1100-ON Series Switch . . . . . . . . . . 18
Performing the N1100-ON Series Initial Configuration . . . . . . . . . . . . . . . . . . . 19
N1100-ON Series Hardware Overview
This section contains information about device characteristics and modular hardware configurations for the Dell Networking N1100-ON Series switch. NOTE: The N1108EP-ON switch uses an external power adaptor. There is no mounting kit
Dell Networking N1108T-ON/N1108P-ON/ N1108EP-ON/N1124T-ON/ N1124P-ON/N1148T-ON/
焊条牌号、型号对照表
焊条(焊丝)牌号、型号对照表碳钢焊条低合金钢焊条不锈钢焊条堆焊焊条铸铁焊条镍及镍合金焊条铜及铜合金焊条气体保护焊、埋弧焊、气焊焊丝碳钢及低合金钢用焊剂不锈钢、有色金属及堆焊用焊剂* 前面带CH为大西洋焊材公司的牌号。
焊条标准牌号对照表焊条新旧牌号对照及适用范围国家标准GB983-77 国家标准GB983-85 国家标准GB983-95 烘干适用于焊接钢材A002 E00-19-10-16 E308L-16 150℃×1h 0Cr19Ni10、0Cr19Ni11Ti；A022 E00-18-12Mo-16 E316L-16 00Cr17Ni14Mo2；A032 E00-19-13Mo2-Cu2-16 E317Mo-CuL-16 0Cr18Ni12Mo2Cu2；A042 E00-23-13Mo2-16 E309MoL-16 00Cr23Ni13Mo2；A062 E00-23-13-16 E309L-16 00Cr23Ni13；A101 E0-19-10-16 E308-16 1Cr19Ni9、Cr19Ni10、0Cr19Ni11；A102 E0-19-10-16 E308-16 0Cr19Ni9、0Cr19Ni11Ti；A107 E0-19-10-15 E308-15 250℃×1h 0Cr19Ni9；A132 E0-19-10Nb-16 E347-16 150℃×1h Cr19Ni11Ti；A137 E0-19-10Nb-15 E347-15 250℃×1h 0Cr19Ni11Ti；A201 E0-18-12Mo2-16 E316-16 250℃×1h(禁反复烘) 0Cr18Ni12Mo2；A202 E0-18-12Mo2-16 E316-16 150℃×1h 0Cr18Ni12Mo2；A207 E0-18-12Mo2-15 E316-15 250℃×1h 0Cr18Ni12Mo2、Cr13、Cr17；A242 E0-19-13Mo3-16 E317-16 150℃×1h Cr19Ni13Mo3；A302 E1-23-13-16 E309-16 Cr23Ni13；A307 E1-23-13-15 E309-15 250℃×1h Cr23Ni13；A312 E1-23-13Mo2-16 E309Mo-16 150℃×1h Cr23Ni13Mo2；A402 E2-26-21-16 E310-16 Cr25Ni20；A407 E2-26-21-15 E310-15 250℃×1h Cr25Ni20；A412 E1-21-21Mo2-16 E310Mo-16 150℃×1h Cr26Ni21Mo2；A422 Cr25Ni20Si2；说明：15、25—碱性，直流反接；16、17、26—钛钙型，交流或直流反接。
郑容和 完全资料
郑容和【个人信息】中文名：郑容和 (正确的官方译名)日文名：ジョンヨンハー英文译名：Jung Yong Hwa韩文名：정용화出生地：韩国首尔驿三洞成长地:韩国釜山生日：1989年06月22日身高：179.2CM（《每天每夜》中说的）体重： 60KG属相：蛇血型：A型星座：巨蟹座语言：韩语、英语、日语（出道前在日本学习）经纪公司：F&C MUSIC职业：歌手，演员别名：长腿叔叔（因为腿又长又直）牛奶男，毛巾男，越魅郑（越看越有魅力的郑容和的意思，朴信惠取的），新人飞飞喜欢的颜色：金色、银色、蓝色、黑色想去的地方：海边喜欢的季节：春、秋喜欢的动物：老虎喜欢的酒：啤酒喜欢的食物：肉讨厌的食物：没有小时候别名：容容用一句话形容自己的性格：Positive希望有几个小孩：2个手机颜色：白色座右铭：肯定的力量世界上最讨厌的东西：蟑螂、蜂擅长的运动：篮球（因为最近迷上了日本电视剧《零秒出手》)拥有的宠物：狗（晶晶）喜欢电影的题材：惊悚片鞋码：260—265mm初恋：初一初吻：初三升高中时性格：开朗，见到生人时有点害羞粉丝昵称：红裤子、Boice（为所属乐队CNBlue粉丝名）兴趣：音乐欣赏学历：Dongrae小学，转学至Gusuo小学，南山中学初中，南山中学高中，大成学院就读（现在转到Highest了）庆熙大学网络学院中国学专业（101130 KBS 1vs100介绍）家庭成员：父亲，母亲，哥哥，自己，所属组合：C.N.BluePOSITION：Leader，Guitar，Vocal ，Rapper对自己身体最满意的部位：眼睛（因为是内双所以看起来很大）喜欢的时尚单品：鞋子、有点亮的衣服理想型：有提到过F(X)的雪莉。
李妍熙。
在强心脏中有述说自己对女生一见钟情的经历。
在100227的我们结婚了，提到喜欢少女时代队长金泰妍的性格和声音。
100303的mnet RADIO STAR里说是一起参加我们结婚了的徐贤。
罗克韦尔自动化 1756 控制器通用指令参考手册 - 中文
参考手册Logix 5000 控制器通用指令参考手册1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix, 1769 Compact GuardLogix, 1789 SoftLogix, 5069 CompactLogix, Emulate 5570重要用户信息在安装、配置、操作或维护本产品前，请阅读本文档及其他资源部分列出的有关本设备安装、配置和操作的文档。
除所有适用规范、法律和标准的要求外，用户还需要熟悉有关安装和接线的事项。
安装、调整、维修、使用、组装、拆卸和维护等活动需要由经相应培训的人员遵照适用操作规范执行。
不遵照制造商指定的方式使用本设备，可能设备的保护措施失效。
在任何情况下，Rockwell Automation, Inc. 均不对因使用或应用本设备而造成的间接性或继发性损害承担责任。
本手册中的示例和图表仅供说明之用。
由于具体安装场合的实际状况和要求千差万别，Rockwell Automation, Inc. 无法对基于这些示例和图表的实际使用承担责任或义务。
Rockwell Automation, Inc. 亦不对本手册所述之信息、电路、设备或软件的使用承担任何专利责任。
未经 Rockwell Automation, Inc. 的书面许可，禁止复制本手册的全部或部分内容。
我们根据需要在本手册中使用了注释，提醒您注意一些安全事项。
警告：提示可能在危险环境中引发爆炸的操作或状况，这些操作或状况可能导致人身伤亡、财产损坏或经济损失。
注意：提示可能导致人身伤亡、财产损坏或经济损失的操作或状况。
这些提示可帮助您识别危险、避免危险、了解后果重要事项：提示一些对成功应用和理解产品至关重要的信息。
设备机身或内部可能贴有此类标签，用以提示特定的预防措施。
电击危险：设备机身或内部（例如驱动器或电机）可能贴有此类标签，用以提醒人们可能存在危险电压。
施耐德EZ7系列 产品样本书
目录
Easy 7系列简介 .........................................................................2 Easy 7行业应用 .........................................................................3
技术参考资料.............................................................................23
脱扣曲线...........................................................................................................23 选择性配合表..................................................................................................25 温度修正系数表 .............................................................................................27 外形尺寸...........................................................................................................29 产品上图标注..................................................................................................31 断路器的储存和运输注意事项 ..................................................................33
扬子采暖热水机说明书
2.2.产品特点 (2)4.安装....................................................................................... 6～9 4.1.机组安装位置 (6)4.3.电源线的选择 (7)4.4.水管连接 (7)4.5.水路安装示意图 (8)4.6.安装注意事项 (9)5.使用…………………………………………………………………………… 9～135.1.运行前检查 (9)5.2.试运行 (9)5.3.线控器的介绍 (10)5.4.按键操作 (11)5.5.管理参数表 (12)6.附录....................................................................................... 14～15 6.1.常见故障判断和排除 (14)1.注意事项....................................................................................‥1 2.1.工作原理....................................................................................2 2.介绍..........................................................................................2～4 4.2.水箱安装位置 (7)6.2.R N -3G X 5(S U )电气接线图 (15)2.3.产品功能 (2)2.5.性能参数 (4)3.结构 ....................................................................................... 5 3.1.机组尺寸 (5)3.2.爆炸图(略)2.4.机型命名规则 (3)5.6.故障代码表 (24)使用本机组之前请务必详细阅读此手册，并按照此手册所规定的内容安装、调试、运行；否则造成的任何损失本公司不承担任何负责。
三菱电梯故障代码表
三菱ELENESSA电梯故障代码表三菱ELENESSA电梯故障查询表三菱ELENESSA电梯在顶楼外召电子板上有两个开关MON1和MON0，只要旋转这两个开关到不同位置，通过显示出来的字母，在对照相应的中文说明，就可以弄清楚电梯的故障部位和发生故障的时间和次数了。
MON1转到0的位置，再将MON0开关旋转到0位置，显示结果如下：显示结果--—-E0没有故障---———E1速度异常过低时检出《SW—TGBL》--—---E2速度过大是检出《SW—TGBH》————-—E3逆转是检出《SW-TGBR》——-——-E4AST异常时检出《SW-AST》--——-—E5逆变器过电流时检出《SS—LOCFO》-—--——E6整流器过电流检出《SS-COVH》--—--—E7整流器电压不足时检出《SS—LVLT》-—----E8LB线圈故障断电时检出《SW-CFLB》-—-———E95线圈故障断电时检出《SW-CFU》-—-———EA迫力接点ON/OFF故障时检出《SW-CFBK》————-—EB轿箱直接信号传输异常《ST-STSCE》——-—-—EC厅外和指令直接信号传输异常《ST—STSHE》———-—-ED系统异常《ST-SYER》——-—--EE驱动在不能启动《SD-DNRS》-————-EF控制在不能启动《SW—NRS》0.将MON1不变,把MON0旋转到1位置。
显示轿箱与平衡驼的位置，平衡是为0-0之间，显示1等于256MM,那么显示2等于512MM。
将MON1不变，把MON0旋转到2位置。
数据输入《安装时间用，和SW1同时使用》将MON1不变,把MON0旋转到3位置。
《显示楼层》将MON1不变，把MON0旋转到4位置.《显示楼层》将MON1不变,把MON0旋转到5位置。
《称重数据输入,保养时使用》将MON1不变，把MON0旋转到6位置。
手动优先模式将MON1不变,把MON0旋转到7位置。
《显示楼层》将MON1不变，把MON0旋转到8位置.《显示楼层》将MON1不变，把MON0旋转到9位置.《显示楼层》将MON1不变,把MON0旋转到A位置。
美国中央电力公司MidNite E-Panel系列产品说明书
E-Panel InstructionsModel: MNE125ST, MNE175ST, MNE250ST, MNE125AL, MNE175AL, MNE250AL,MNE175STS, MNE250STS, MNE125LT, MNE175LT, MNE250LT, MNE125ALT, MNE175ALT, MNE250ALT, MNE125AL PLUS, MNE175AL PLUS, MNE250 PLUSMNE125STM, MNE175STM, MNE250STM, MNE125ALM, MNE175ALM, MNE250ALM, MNE125STMM, MNE175SM, MNE250SMLeft and Right hand 120/240VAC versionsModel Number code:MNE---------------175-----------ST or AL----------------M-240IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS - These instructions contain important safety and operating instructions for MidNite Solar E-Panels.If you do not fully understand any of the concepts, terminology, or hazards outlined in these instructions, please refer installation to a qualified dealer, electrician or installer. These instructions are not meant to be a complete explanation of a renewable energy system.GENERAL PRECAUTIONSWORKING WITH OR IN THE VICINITY OF A LEAD ACID BATTERY, SEALED OR VENTED IS DANGEROUS. VENTED BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION. FOR THIS REASON, IT IS VERY IMPORTANT THAT BEFORE SERVICING EQUIPMENT IN THE VICINITY OF LEAD-ACID BATTERIES YOU REVIEW AND FOLLOW THESE INSTRUCTIONS CAREFULLY.If service or repair should become necessary, contact MidNite Solar Inc. Improper servicing may result in a risk of shock, fire or explosion. To reduce these risks, disconnect all wiring before attempting any maintenance or cleaning. Turning off the inverter will not reduce these risks. Solar modules produce power when exposed to light. When it is not possible to disconnect the power coming from the Photovoltaics by an external means such as a combiner, cover the modules with an opaque material before servicing any connected equipment.Never attempt to charge a frozen battery.When it is necessary to remove a battery, make sure that the battery bank disconnect breaker is in the off position and that the PV breakers, grid breakers and any other sources of power to the inverter are in the off position. Then remove the negative terminal from the battery first.To reduce risk of battery explosion follow these instructions and those published by the battery manufacturer as well as the manufacturer of any additional equipment used in the vicinity of the batteries. Before installing the battery enclosure, read all instructions and cautionary markings in or on any connected electrical equipment.Avoid producing sparks in the vicinity of the batteries when using vented batteries. Provide ventilation to clear the area of explosive gases. Sealed AGM and Gel batteries do not under normal conditions create explosive gases. Be especially cautious when using metal tools. Dropping a metal tool onto batteries can short circuit them. The resulting spark can lead to personal injury or damage to the equipment. Provide ventilation to outdoors from the battery compartment when installing vented batteries such as golf cart T-105 batteries. The addition of a spill tray is also a good idea.Clean all battery terminals. Very high currents are drawn from the batteries; even a small amount of electrical resistance can result in overheating, poor performance, premature failure or even fire.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes. Wear complete eye and clothing protection. Always avoid touching eyes while working near batteries. If battery acid or battery terminal corrosion contacts skin or clothing, wash immediately with soap and water. If acid enters the eyes, immediately flood with cool running water for at least 15 minutes and get medical attention immediately. Baking soda neutralizes battery acid electrolyte. Keep a supply near the batteries.Do not work alone. Someone should be in the range of your voice or close enough to come to your aid when you work with or near electrical equipment.Remove rings, bracelets, necklaces, watches etc. when working with batteries, photovoltaic modules or other electrical equipment. Power from an illuminated photovoltaic array makes a very effective arc welder with dire consequences if one of the welded pieces is on your person.To reduce the risk of injury, connect only deep cycle lead acid type rechargeable batteries. Other types of batteries may leak or burst, causing personal injury or damage.This equipment is NOT intended for use with life support equipment or other medical equipment or devices.It is the responsibility of the installer to verify compliance with all applicable codes.Before making any connections verify that the circuit breakers are in the off position including the inverter breaker. Double check allwiring before applying power.The MidNite Solar E-Panel comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise.List of features:● Steel or aluminum chassis with all the r equired openings and knock outs to aid in a NEC compliant system installation● Inverter mounts on a unique hinged door to keep the footprint of the system small as possible● Mounting brackets are included to aid in one person installations● Inverter ba ttery breaker, inverter cables and snap in grommets included*● 500 amp / 50mv shunt included for battery monitoring systems● B us bars are included for additional battery plus, PV plus and battery minus wiring● Heavy duty 175 amp AC power distribution bu s bars included● 50 amp AC input disconnect for generator or utility included, pre-wired (15amp MM series) ● 50 amp AC bypass switch for bypassing inverter circuit, pre-wired (15amp MM series)● Mounting bracket to aid in mounting an OutBack MX60 or MidNi te Classic to the side of the E-Panel*● Battery cable cover to enclose cables external to the chassis***● Inverter and charge controller mounting hardware● Rectangular cut outs for mounting a North American GFCI style AC outlet● Cut outs for mounting up to six additional 13mm wide din rail mount breakers and three ¾” wide panel mount breakers for additional circuits such as PV, wind, hydro or AC distribution ● Plastic snap in conduit and fittings from chassis to inverter for AC, BTS and control circu its (OB versions)● ETL listed to UL and CSA standards* inverter cables and charge control bracket omitted on the LT configurations*** LT versions do not have a cable cover, MM series uses the inverter battery terminal capsThe dimensioned chassis drawings above show the location of the conduit knockouts, mounting holes and mounting brackets.✓Knockouts on the top surface are directly in line with ones on the bottom surface for stacking units vertically.✓Knockouts on the lower end of each side are directly in line with each other for stacking horizontally.✓Steel powder coated units are gray textured. Aluminum powder coated units are gloss white.Door ConfigurationThe standard E-Panel comes as a left hand hinged assembly with breakers on the left side and a left hand hinged door. The door will open to the left over the breakers. If for some reason you need the breakers on the left, but the door to open to the right, then you need the optional right hand door. All breakers can be unmounted and reassembled on the right side of the chassis as is explained in this manual. Right hand E-Panels can be built special at the factory for no additional charge. Changing sides in the field is not a simple task! The left hand hinge is standard because the majority of charge controllers need to be mounted to the right side of the E-Panel. See below.1. Apollo T-80 should be a left hand hinge (heatsink is on the right)3. OutBack MF80 should be left hand hinge (No knock out on the right side of chassis)4. MX60 works equally as well on either side5. WX controller works equally as well on either side6 C40/C60 and Tri-star work equally as well on either side7. Blue Sky has the heatsink on the left, so should use a right hand hinge.See E-Panels explained on the MidNite website for exact part numbers of door options and an explanation of each E-Panel platform. E-Panels Explained will further help you in selecting the applicable E-Panel for your application.The installation begins by selecting a wall. All E-Panels are indoor rated and should not be placed outside unless precautions are made to keep rain and moisture off of the system. The wall must have suitable clearance to open the door with inverter attached. It must also have adequate clearance to operate the breakers and outlets that protrude out the sides. The NEC requires 30” clear on the wall. The E -Panel may be located anywhere within this 30 inches, however make sure you have sufficient room to the side to operate the circuit breakers. Some E-Panel installations may have circuit breakers on both sides. The NEC also requires 36 inches free and clear of obstructions in front of the E-Panel. The 36” clear area in front of all electrical panels is to provide a space to fall back into incase of electrical shock. Each E-Panel with its’ inverter will weigh close to 100 pounds so make sure your wall is adequate for this load. The mounting brackets provided will span studs on 16 inch centers. Mount the top bracket as shown at about 64-68 inches off the floor. If stacking two systems vertically, make sure the breakers fall within the NEC guidelines for height, (lowest and highest allowable). Number 10 screws with back up washers will suffice, but ¼” (6mm) hardwar e provides for a better margin of safety.A little pre-planning here will go a long way towards a successful installation. Battery boxplacement and size also need to be thought out for NEC compliance. The remote display should be approximately at eye level when attached to the E-Panel. Some installation photos below show various ways to install your system.You can make life a little easier by installing additional breakers for charge control, the inverter and such while the E-Panel is still lying horizontal on a table. Do as much of the additionalwiring as possible before hanging the E-Panel on the wall. The following pictures show some of the operations that can be done “on the bench” where access is optimal.Field installed breakers should be torqued to 20 inch pounds, then re-torqued after one hour. This is important! Wires cold flow and sometimes loosen up after the initial tightening, so don’t skip this step. E-Bay is a good source for Sturdevant Richmont torque screw drivers if you are an installer.Breakers such as charge control input and output and DC-GFP can be completely wired prior to installation on the wall. Field wiring is done at the PV, AC and DC terminal bus bars.This picture shows the Outback E-Panel mountedwith two MNEPV63 charge control breakersinstalled and an AC and DC MNSPD Surge ProtectorDevice. The upper mounting bracket can be securedto the wall and then the E-Panel chassis hung ontoit using the keyhole slots in the upper back of thechassis.Before mounting the inverter to the chassis andwith the E-Panel mounted on the wall, complete allwiring that will be coming to and going from the E-Panel. The following pictures give you some idea ofwhat to expect.The picture to the right is a Magnum 240V E-Panel.Notice it has an OutBack OBDC-GFP mounted on the leftside of this right hand hinge unit. There are a total of sixdin rail slots available on each E-Panel for customerconfiguration. This installation has two chargecontrollers. You need a breaker in the PV input and onthe DC output of the charge controller. This took up 4din rail slots for this system. The MidNite DC-GFP takesup 2 din rail slots for the 63 amp version and 2 panelmount knock out slots for the 80 amp version. Neitherone of these would work in this case, so the two circuitOutBack GFP was used. It takes up three slots on theblank plate opposite the din rails. Note the green 6AWGneutral to ground bonding wire in this picture. Theneutral to ground bond is required on all systems perNEC. Note that if this were a power back up system on autility connected home, this bonding wire would not beinstalled as it would already be there on the serviceentrance. On off-grid installations thatemploy a sub panel circuit breaker box, you can make this neutral to ground bond in the sub-panel. It is technically better to make this bond closest to the source of power (the E-Panel), but many electrical inspectors will be looking for it in the sub-panel box. It will work just fine in either location, just make sure you have adequate conductor sizes between the E-Panel and the sub-panel. Do not rely on the hinges for grounding the equipment mounted to the door.The picture to the left shows the charge control bracket suppliedin the E-Panel kit. This one is for a left hand hinged unit, so thecharge control bracket is on the right side opposite the din railbreakers.The charge control bracket supplied works with the OutBackMX60, MF80, MidNite Classic and Xantrex WX charge controllers.The Charge control bracket is secured to the E-Panel with 3 #10 x3/8” sheet metal e one more screw to secure the topbracket of charge controller and a 1” close nipple on the side asshown below. Note tha t it takes three 1” locknuts to mount the controller. One lock nut is used in between the E-Panel side and the charge controller side to act as a spacer. It may help to replace the pan head screws on the side plate with flat head screws in some cases to increase clearance.In addition to the 1” close nipple andthree locknuts, you will need plasticthreaded adapters installed on the endsof the metal threaded nipple. Theseadapters protect wires from coming intocontact with the sharp edges of themetal close nipple.Before wiring the charge controller,determine what size wire and breakerswill be required. The breakers are there to protect the wiring, notthe controller!It is very common to use the MidNite 63 amp din rail breakers for this task. Even if the charge controller is only 30 amps, it can be wired using 63 amp breakers. You will need 6AWG wire to go with those breakers though. If using one of the more powerful 80 amp charge controllers, you will need the MNEDC80 panel mount breakers. These mount on the opposite wall from the din rail breakers. 4AWG wire is required to match up with these 80 amp breakers.The flow path for the PV circuit is as follows:1.The PV + wire comes into the E-Panel and attaches to the PV+ busbar2.The PV- comes into the E-Panel and attaches to the shunt busbar. This is for charge controllers thathave a common PV- and battery- connection, (most are this way). Some charge controllers like the Xantrex XW and the Blue Sky must keep thes PV- and battery- circuits separated. The E-Panels have mounting embosses to accommodate a short white busbar to act as an isolated PV-. Use theMNSBBW for the busbar.3.From the PV+ busbar, use the appropriate gauge red wire (THHN) and connect to the PV+ INbreaker. DC breakers have polarity markings. These may be a + sign or a line and load sign.Although the PV circuit has very limited energy available and thus making polarity issues not too critical, it is best to try to get it right. This is where the fun begins.4. The + (line) marking on the breaker would seem to indicate that you should connect the PV+ tothis terminal since the PV+ is the highest potential in the system. Our testing shows this would be correct. The + side of the breaker needs to be connected to the highest potential per the breaker instructions.5.The - side of the PV in breaker goes to the charge controller PV+ input terminal.6.The output of the charge controller is sometimes marked battery+ This terminal is to connect tothe charge controller output breaker. It will not connect to the + or Line side of the breaker.7.The other side of the breaker, + or line connects to the battery plus busbar. This connection isimportant to observe polarity markings. In the event of a charge controller failure, they quite often short internally, which means they are shorting out the battery. If proper polarity is not observed, the breaker may not open and the wiring will burn up.The factory installed red battery plus bus wire is 4AWG, so it is large enough for all breaker sizes.The diagrams above show 63 amp din rail mount breakers. When 80 amp breakers and or DC-GFPare required, those breakers mount on the wall opposite the din rails. Thereare three panel mount breaker slots to accommodate the 80 ampbreakers and DC-GFP. The 80 amp DC-GFP takes up two of the three slots. The third slot will be used for the output of the 80 amp charge controller. The PV input to an 80 amp charge controller could use a 63 amp din rail mount breaker. There is no additional DC-GFP required when using the MidNite Classic controller. The DC-GFP and arc fault protector are built into the Classic controllers.Mounting the inverterThe 6 x 20mm pan head Philips screws for mounting the inverter are taptite (thread forming). Use one of these 6mm screws to pre-tap threads into the steel doors extruded funnel holes. Aluminum doors have press nuts and do not require tapping. Make sure to install all ¼” star washers to bite through the powder coating.One of the best features of the MidNite E-Panel is that one person can do all the lifting.Slip Tab A into Slot B Install inverter cablesInstall the 3.5” bushing as shown protruding up into the inverter side of the door before routing the inverter cables through the door.More tidbits to digestImportant! Torque din rail mount breakers Installing the breaker cover to 20 in lb. Wait one hour and re-torque .Six locations are available for additional 13mm wide breakers. These breakers would normally be field installed for such things as: solar, wind or hydro charge controllers, DC ground fault protector, AC and or DC distribution center and others. Remove the cut outs for the intended breakers. Each 13mm wide breaker requires removal of two cut outs. 17.5mm wide breakers require removal of three cut outs. It is important to torque the terminals to 20 inch pounds. It is highly recommended to go back over all terminations after an hour and also conduct a pull test.Doors installed,plastic conduit installed, wiring complete. Note the battery cable routing. It is important to route cables so the doors close freely without undue force. The left E-Panel battery cables came from above, but could have come fromYou may be surprised that what you thought was a tight connection actually pulls out with little effort. This is caused be a phenomenon called cold flow. Copper is a relatively soft metal and will continue to move under inadequate clamping pressure. A 20 inch pound of torque takes a lot of strength! Use the supplied UL listed plastic 2” x 6” spacers to separate AC and DC breakers if installed on the same din rail. Barriers are required per NEC between AC and DC circuits.MidNite offers 150VDC breakers in 1,2,3,4,5,6,7,8,9,10,12,15,20,30,40,50 and 63 amps. AC breakers are available in 10,15 and 20 amp sizes. Those breakers carry the UL489 and UL489A branch circuit rating. 30 and 50 amp AC breakers are available in UL1077 listed versions, but are not branch circuit rated.For OutBack installations, install the conduit pieces supplied by routing the three wires through the door and conduit before snapping the fittings into place. Snap the top right angle fitting into place first and then the one in the door. Once the length of wire has beenestablished by opening and closing the door, then cut back the three wires as required and hook up to the terminal block. The conduit in the middle of the inverter is for AC wiring. The outer conduit is for remote and battery temp sense wires.Note: Battery cables in a NEC compliant system requires cable listed for use in residential wiring.For installations requiring the OutBack surge arrestor, see pictures below. Note that this surge arrestor is only accommodated on the Stretched OutBack E-Panel.The flex conduit snaps into the sides of the surge arrestor. You will need to get an adapter to go from the 1” conduit hole in the surge arrestor housing to the ¾” flex conduit. These are readily available at your local electrical supply store or Home Depot/Lowes.This basic wiring diagram is mounted on the inside of the hinged door. Elsewhere in these instructions is a slightly expanded version of the E-Panel wiring diagram. There is an AutoCAD version of the expanded wiring diagram at This is provided so that interested parties may download and modify it to tailor their specific system configuration. When stacking two OutBack inverters, it may be required to add the OutBack PSX-240 autotransformer.OutBack and Magnum horizontal stacked systemsE-Panel parts locator, DoorSupplied insulators to achieverequired separation of AC and DCcircuitsE-Panel parts locator, internal Ground to Neutral connectionMagnum MS4448-AE & MS4024-AE system pre-wire with DC-GFPMNE175SM / MNE250SM Samlex E-Panel wiring.MNE175SM Shown.。
死亡病例ICD10编码系统举例
(c) 阻塞性肺气肿 管扩张并咳血、慢
(d) (J43.9)
支、肺气肿，因慢
Ⅱ 慢支 (J42)
支并发感
根本死冠因心慢病性(I阻25塞.1性) 肺病 J染44.支8 气管扩张入院。
使用规则 总原则+注释1
说明 J42 未特指的慢性支气管炎 伴有提及…： J43.- 肺气肿，编码到J44.-
- 19 -
Ⅰ(a) 肺部感染 (J98.4) (b) 腹腔积液 (C79.8) (c) 肝转移 (C78.7) (d) 卵巢中低分化 浆乳癌 (C56)
Ⅱ 肠梗阻 (K56.6)
根本死因 卵巢癌 C56
使用规则 总原则
说明
调查记录
病史: 女61岁, 1999年 诊断为卵巢癌，2001 年发生肝转移、盆腹 腔多发转移，2002年 因肠梗阻 入院。
使用规则 总原则
说明
应尽量了解使用农药的具体类型，如： 有机磷农药、杀虫剂等，以便于更准确 编码。
- 15 -
死因证明书
Ⅰ(a) 颅内出血 (P52.9) (b) 新生儿出血症 (P54.9)
Ⅱ 早产 (P07.3)
调查记录
新生儿，早产34周，因新 生儿出血症引起颅内出血 死亡。
根本死因 新生儿出血症 P54.9
使用规则 总原则+注释2
说明 恶性肿瘤引起急性或终末期循环系统疾 病应被作为可能的顺序加以接受。
-2-
Ⅰ(a) (b) (c)
Ⅱ
死因证明书 失血性休克 (R57.1) 产后大出血 (O72.1)
早产 (O60)
调查记录
女26岁, 妊娠27周分娩, 产后大量出血，3日后 失血性休克死亡。
根本死因 产后大出血 O72.1
MOS管参数
0.35um.MODEL mod1 nmos (level=3 tox=7.9e-9 nsub=1e17 gamma=0.5827871 phi=0.7 vto=0.5445549 +delta=0 uo=436.256147 eta=0 theta=0.1749684 kp=2.055786e-4 vmax=8.309444e4 kappa=0.2574081+rsh=0.0559398 nfs=1e12 tpg=1 xj=3e-7 ld=3.162278e-11 wd=7.046724e-8 cgdo=2.82e-10 cgso=2.82e-10+cgbo=1e-10 cj=1e-3 pb=0.9758533 mj=0.3448504 cjsw=3.777852e-10 mjsw=0.3508721).MODEL mod2 pmos (level=3 tox=7.9e-9 nsub=1e17 gamma=0.4083894 phi=0.7 vto=-0.7140674+delta=0 uo=212.2319801 eta=9.999762e-4 theta=0.20220774 kp=6.733755e-5 vmax=1.181551e5 kappa=1.5+rsh=30.0712458 nfs=1e12 tpg=-1 xj=2e-7 ld=5.000001e-13 wd=1.249872e-7 cgdo=3.09e-10 cgso=3.09e-10+cgbo=1e-10 cj=1.419508e-3 pb=0.8152753 mj=0.5 cjsw=4.813504e-10 mjsw=0.5)0.5um（1）MODEL CMOSN NMOS LEVEL=3 PHI=0.700000 TOX=9.6000E-09 XJ=0.200000U TPG=1 VTO=0.6684 DELTA=1.0700E+00 LD=4.2030E-08 KP=1.7748E-04 UO=493.4 THETA=1.8120E-01 RSH=1.6680E+01 GAMMA=0.5382 NSUB=1.1290E+17 NFS=7.1500E+11 VMAX=2.7900E+05 ETA=1.8690E-02 KAPPA=1.6100E-01 CGDO=4.0920E-10 CGSO=4.0920E-10 CGBO=3.7765E-10 CJ=5.9000E-04 MJ=0.76700 CJSW=2.0000E-11 MJSW=0.71000 PB=0.9900000MODEL CMOSP PMOS LEVEL=3 PHI=0.700000 TOX=9.6000E-09 XJ=0.200000UTPG=-1 VTO=-0.9352 DELTA=1.2380E-02 LD=5.2440E-08 KP=4.4927E-05 UO=124.9 THETA=5.7490E-02 RSH=1.1660E+00 GAMMA=0.4551 NSUB=8.0710E+16 NFS=5.9080E+11 VMAX=2.2960E+05 ETA=2.1930E-02 KAPPA=9.3660E+00 CGDO=2.1260E-10 CGSO=2.1260E-10 CGBO=3.6890E-10 CJ=9.3400E-04 MJ=0.48300 CJSW=2.5100E-10 MJSW=0.21200 PB=0.9300000最简单的CMOS参数.MODEL mod1 nmos（LEVEL=1 VTO=0.7 GAMMA=0.45 PHI=0.9NSUB=9e+14 LD=0.08e-6 UO=350 LAMBDA=0.1TOX=9e-9 PB=0.9 CJ=0.56e-3 CJSW=0.35e-11MJ=0.45 MJSW=02 CGDO=0.4e-9 JS=1.0e-8）.MODEL mod2 pmos（LEVEL=1 VTO=-0.8 GAMMA=0.4 PHI=0.8NSUB=5e+14 LD=0.09e-6 UO=100 LAMBDA=0.2TOX=9e-9 PB=0.9 CJ=0.94e-3 CJSW=0.32e-11MJ=0.5 MJSW=0.3 CGDO=0.3e-9 JS=0.5e-8）.MODEL NMOS1 NMOS LEVEL=2 NSUB=9.50E+15 VTO=+1.07 TOX=44.0N +LD=0.15U XJ=1.0U DELTA=1.68 UO=0.693K UEXP=0.111 UCRIT=10.0K+VMAX=41.0K NFS=0.1T PB=0.45 JS=100.0U RSH=45.0 NEFF=1.16+CGSO=0.27N CGDO=0.27N CJSW=0.24N CJ=0.105M MJ=0.48 MJSW=0.27 .MODEL PMOS1 PMOS LEVEL=2 NSUB=3.24E+16 VTO=-0.79 TOX=44.0N +LD=0.25U XJ=2.0U DELTA=0.89 UO=0.271K UEXP=0.181 UCRIT=10.0K +VMAX=33.0K NFS=0.1T PB=1.04 JS=100.0U RSH=80.0 NEFF=0.77+CGSO=0.35N CGDO=0.35N CJSW=0.43N CJ=0.330M MJ=0.48 MJSW=0.40。
游戏聊天常用英文缩写
游戏聊天常⽤英⽂缩写Afk = after keyboard/away from keyboard(感谢海外版斑⽵Doublecheese更正)本⼈不在/离开⼀下asap = as soon as possible 尽快，尽可能快atm = at the moment ⽬前，现在，现在正在（⼲某事）Brb = be right back 马上回来（意思要⾛开⼀下）Brt = be right there 马上到BBs=be back soon马上回来BBl=be back later ⼀会⼉回来BTW = By the way 顺便问问/顺便⼀提CU/cya = see you / see you all 再见/⼤家再见FTW = for the win 相当于“必胜”gg/gl/hf = good game / good luck / have fun祝发挥好（如果事件已经结束则为：发挥不错哦）/祝好运/玩得开⼼gj/wd = good job / well done 相当于：做得好！IMO=IN MY OPINION 我认为，我觉得Lol = laughing out loud / lots of laughs ⼤笑Lmao = laughing my ass off 笑掉屁股Idk = I don't know 不知道Ic = I see 原来这样/哦/我明⽩了Lfm = look(ing) for more / looking for member 找更多的（⼈）LFG - Looking for a group，寻找队伍以加⼊。
nn = night night 晚安（通常第⼀个⼈说gnight/gn8;第⼆个⼈说nite；后⾯的就说nn）NP=NO PROBLEM 没问题，没关系Omg = oh my God 相当于“天呀！”Omfg = oh my f u c k （ing）God 语⽓较重的“天呀！P.S = postscript 再者, ⼜及; 附⾔rofl = roll on floor laughting 笑到在地上打滚tks/tq/ty/tyvm = thanks/thank you/thank you/thank youttyl = talk to you later ⼀会⼉在谈，迟点跟你说very much 谢谢/谢谢你/谢谢你/⾮常感谢你WTF = what the f u c k 等同于“吊”“我⽇”WTH = what the hell ⽐较⽂雅的WTF ，常作为疑问“怎么会这样？”wb = welcome back 欢迎回来w8t = wait 等等wtb/s = want to buy/sell 想要买/卖what's up=wuts up 怎么了yw = you'r welcome/you are welcome 不客⽓，不⽤谢【美服】整理了⼀些组队⽤到的⼀些常⽤语Hi He llo ye s no之类的就不再说了基本都懂表情词LO L(lo l) = Laughing out lo udly/Lot s o f Laugh/Laugh o ut lo ud. ⼤笑.这个缩写意味着某些事的确⼗分好笑。