NX8571SC984D-BA中文资料
报刊资料索引
类名类号Z Z896:H/BKZLZ Z896/RMRB3Z Z895:C/NBZLZ Z894:N/QGBKZ Z894:C/QGBKZ Z894:C/QGBKZ Z892:Z2/GDXXZ Z892:Z/ZWSZZ Z892:Z/ZWSZZ Z892:Z/QNWZZ Z892:Z/JRWZZ Z892:Z/HWWZZ Z892:Z/HWWZZ Z892:Z/DZZ Z892:Z/DZZ Z892:Z/DXNBZ Z892:Z/CXSZZ Z892:X/HJKXZ Z892:TQ/HGWZZ Z892:TP39/JSJY Z Z892:TN/ZGWXZ Z892:TN/DZKJZ Z892:R/JKWZZ Z892:Q/ZGSWZ Z892:P9/ZGDLZ Z892:O65/ZGWJ Z Z892:O6/ZGHX1 Z Z892:O43/ZGGX Z Z892:O4/ZGWLZ Z892:O3/ZGLXZ Z892:O1/ZGSX1 Z Z892:F2/JJGLZ Z892:D44/ZWFN Z Z892:C93/GLKX Z Z892:C93/GLKX Z Z892:C/ZGSHZ Z892:C/ZGSHZ Z892:C/ZGSHZ Z892:C/ZGSHZ Z892:C/XHWZZ Z892:C/XHWZZ Z892:C/XHWZZ Z892:C/XHWZZ Z892:C/XHWZZ Z892:C/XHWZZ Z892:C/SZZ Z892:C/GWSH2Z Z892:C/GWSH2Z Z892:C/GWSH2Z Z89:N/ZGXSZ Z89/ZWQKZ Z81:G2/QGXSZ Z6/FHZKZ Z52Z Z52Z Z52Z Z4/ZSWKZ Z4/XBKZ Z4/NFCZ Z4/NFCZ Z4Z Z30/ZGKXZ Z291/ZGSHZ Z291/ZGKXZ Z28/ZYMDZ Z28/ZYMDZ Z28/ZNMYZ Z28/ZNMYZ Z28/ZNMYZ Z28/YNMZ2Z Z28/XNMZ1Z Z28/GZMYZ Z28/GXMZZ Z278/XNJDZ Z278/XAJDZ Z278/SHJDZ Z277/HHDXZ Z276/TJDXZ Z27/QHDX1Z Z27/QHDX1Z Z27/QHDXZ Z27/NJLGZ Z27/HZKJ3Z Z27/HZKJ3Z Z27/HZKJZ Z27/HDLGZ Z27/DLLGZ Z27/BJGDZ Z26/HZNDZ Z24/ZGKXZ Z24/GFKJZ Z24/BJKJZ Z237/XATYZ Z237/SHTYZ Z237/SDTYZ Z237/GZTYZ Z237/CDTY-1 Z Z237/BJTDZ Z237Z Z237Z Z236/ZYYYZ Z236/NJYS1 Z Z234/XAWGZ Z234/SCWYZ Z234/JFJW1 Z Z233/WJXYZ Z233/WJXYZ Z232/YNXZZ Z232/HDZFZ Z231/ZNCJ1 Z Z23/ZYSHZ Z22/YNSD1Z Z22/YNSD1Z Z22/YBSDZ Z22/XZSFZ Z22/XZSFZ Z22/XNSD2Z Z22/XNSD2Z Z22/XNSD2Z Z22/XNSD1Z Z22/XJSDZ Z22/XBSD1 Z Z22/XBSD1 Z Z22/XBSD1 Z Z22/XBSDZ Z22/TJSD-2 Z Z22/TJSD-2 Z Z22/TJSD-2 Z Z22/SYSY-1 Z Z22/SYSY-1 Z Z22/SYSY-1 Z Z22/SXSD-4 Z Z22/SXSD-4 Z Z22/SXSD-4 Z Z22/SXSD-2 Z Z22/SXSD-2 Z Z22/SXSD-2 Z Z22/SXSDZ Z22/SHSD4 Z Z22/SHSD4 Z Z22/SHSD4 Z Z22/SHSD3 Z Z22/SDSD3 Z Z22/SDSD2 Z Z22/SDSD2 Z Z22/SCSY4 Z Z22/SCSY3 Z Z22/SCSD1 Z Z22/SCSD1 Z Z22/SCSDZ Z22/QHSD1 Z Z22/QHSDZ Z22/QHSDZ Z22/QFSY-5 Z Z22/QFSY-5 Z Z22/QFSDZ Z22/NMSD1 Z Z22/NMSDZ Z22/NMSDZ Z22/nmgmZ Z22/NJSD1 Z Z22/NJSDZ Z22/NJSDZ Z22/LNSD1 Z Z22/LNSDZ Z22/LNSDZ Z22/KSSYZ Z22/JXSD1 Z Z22/JXSDZ Z22/JXSDZ Z22/JXSDZ Z22/JXJYZ Z22/HZSYZ Z22/HNSY7 Z Z22/HNSFZ Z22/HNSD7 Z Z22/HNSD7 Z Z22/HNSD7 Z Z22/HNSD6 Z Z22/HNSD5Z Z22/HNSD3 Z Z22/HNSD3 Z Z22/HNSD3 Z Z22/HLJJZ Z22/HEBS3 Z Z22/HDSD-7 Z Z22/HDSD-2 Z Z22/HDSD-2 Z Z22/HDSD1 Z Z22/HBSD9 Z Z22/HBSD8 Z Z22/HBSD-7 Z Z22/GZSD1 Z Z22/GZSDZ Z22/GZSDZ Z22/GZSDZ Z22/GZJY1 Z Z22/GXSD1 Z Z22/GXSDZ Z22/GXSDZ Z22/GXSDZ Z22/GXSDZ Z22/FJSD-4 Z Z22/FJSD-4 Z Z22/FJSD-3 Z Z22/DBSD-7 Z Z22/DBSD-6 Z Z22/CQSY1 Z Z22/CQSYZ Z22/CQJYZ Z22/BJSD-1 Z Z22/BJSD1 Z Z22/AHSD-1 Z Z22/AHSD-1 Z Z22/AHJY2 Z Z21/ZZDX-1 Z Z21/ZZDXZ Z21/ZZDXZ Z21/ZSDX-1 Z Z21/ZSDXZ Z21/ZJDX3 Z Z21/ZJDX2 Z Z21/ZJDX-1 Z Z21/ZGRD1 Z Z21/ZGRD1 Z Z21/ZGRD1 Z Z21/ZGRD1 Z Z21/ZGRD1 Z Z21/YNDX-1 Z Z21/YNDX1 Z Z21/YADX1 Z Z21/YADXZ Z21/XTDX3 Z Z21/XTDX1 Z Z21/XTDX1 Z Z21/XMDX1 Z Z21/XMDXZ Z21/XMDXZ Z21/XMDXZ Z21/XJDX-1Z Z21/XBDX1 Z Z21/XBDXZ Z21/XBDXZ Z21/WHDX2 Z Z21/WHDX1 Z Z21/WHDX1 Z Z21/TJDX1 Z Z21/TJDX1 Z Z21/TJDXZ Z21/SZDX3 Z Z21/SZDX1 Z Z21/SZDXZ Z21/SZDXZ Z21/SXDX1 Z Z21/SXDXZ Z21/SXDXZ Z21/STDX1 Z Z21/STDXZ Z21/STDXZ Z21/SHDXZ Z21/SHDXZ Z21/SCDX-1 Z Z21/SCDXZ Z21/SCDXZ Z21/NXDX-1 Z Z21/NMGD1 Z Z21/NMGDZ Z21/NKXB-3 Z Z21/NKXB-3 Z Z21/NKDX-1 Z Z21/NJDX-1 Z Z21/NJDXZ Z21/NJDXZ Z21/NJDXZ Z21/NCDX1 Z Z21/NCDX1 Z Z21/NCDXZ Z21/LZDX-1 Z Z21/LZDXZ Z21/LNDX-1 Z Z21/LNDXZ Z21/LNDXZ Z21/JNDX-2 Z Z21/JNDX-2 Z Z21/JNDX-2 Z Z21/JNDX-2 Z Z21/JLDX-4 Z Z21/JLDX1 Z Z21/JHDX3 Z Z21/HNDX5 Z Z21/HNDX5 Z Z21/HNDX5 Z Z21/HNDX5 Z Z21/HNDX4 Z Z21/HNDX3 Z Z21/HNDX2 Z Z21/HNDXZ Z21/HLJD1 Z Z21/HBDX-2 Z Z21/HBDX-1Z Z21/HBDX-1 Z Z21/HBDX1 Z Z21/HBDX1 Z Z21/HBDX1 Z Z21/HBDX1 Z Z21/HBDXZ Z21/GZDX2 Z Z21/GZDX1 Z Z21/GXDX2 Z Z21/GXDX1 Z Z21/FZDX-1 Z Z21/FDDX-2 Z Z21/FDDX-1 Z Z21/FDDX-1 Z Z21/DNDX-1 Z Z21/DNDX-1 Z Z21/DNDXZ Z21/DBDX-1 Z Z21/DBDX-1 Z Z21/DBDXZ Z21/CQDX-1 Z Z21/CQDXZ Z21/CDDX1 Z Z21/CDDXZ Z21/BJDX3 Z Z21/BJDXZ Z21/BJDXZ Z21/AHDX-1 Z Z21/AHDX-1 Z Z21/AHDXZ Z21Z Z21Z Z203/ZGQN Z Z1/ZSCZ Z1/SJBLZ Z1/SJBLZ Z1/KX1Z Z1/KJDB1Z Z1/HQZ Z1/HQZ Z1/BKZSZ Z1/BKZSZ Z1/BKZSZ Z/BJLGZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ ZZ Z总计z z总计X X78/HGHBX X7X X55/HYHJX X5/HJWR1X X5/HJWRX X4/ZHXX X37/CJLYX X3/HJBH4X X3/HJBHX X3/GTYZX X3/CSHJ1X X24/RYZRX X2/HJYJ总计x x173总计X X13/HJHXX X1/HJKXX X/ZGHJX X/SJHJX X/HJKX5X X/HJKX3X X/HJKXX X/HJJY总计V V4/ZGHTV V278/HKMX V V211/KQDL V V2/HKZSV V11/FDTSV V1/KJKXV VV VV V总计U U66/JCZSU U6/HH总计T TV7/ZGSXT TV/RMZJT TV/RMCJT TU984T TU98/XDCS T TU98/XDCS T TU98/XDCS T TU98/GWCS T TU98/CSKF T TU98/CSGH3 T TU98/CSGH2 T TU98/CSGH T TU98/CSFZ T TU98/CSFZ T TU98/CSFZ T TU767/SNSJ T TU-49/JZZS T TU24/ZGFD T TU22/SNSJ T TU/TMGCT TU/SJJZT TU/JZXBT TU/CXJST TS957/SZT TS953/YQT TS2/SPKXT TS2/SPKJT TQ64/RYHX2 T TQ64/RYHX T TQ63/TLGY T TQ571/GGKX T TQ53/SYHG T TQ45T TQ45T TQ43/HXYZ T TQ43T TQ42/LZJH T TQ42/HXSJ T TQ33/XJGY T TQ32/SLGY T TQ31/GFZC T TQ17/GSYX T TQ11/WJYG T TQ1T TQ04/HGXX T TQ03T TQ02/WJKT TQ02/HXGC T TQ0/HXSJT TQ0T TQ/YRZJT TQ/XDHGT TQ/JXYZT TQ/HGXBT TQ/HGJZT TQT TQT TP7/YGXBT TP393/WLYX T TP393/WLAQ T TP393/JSJY T TP393/HLWZ T TP393.07T TP393T TP39/WXDN T TP39/JSJY4 T TP39/JSJY4 T TP39/JSJY T TP39/JSJY T TP39/JSJX T TP39/JSJX T TP39/JSJX T TP39/JSJF1 T TP39/JSJF T TP39/JSJC T TP368.1T TP36/WJSJ T TP31/RJYG T TP31/RJXB T TP31/RJXB T TP31/RJSJ T TP31/RJGC1T TP31/DNBCT TP3/ZGJST TP3/XXYDT TP3/XXWXT TP3/XDN1T TP3/XDNT TP3/WXJYT TP3/WXJYT TP3/WXJST TP3/WJSJT TP3/WJSJT TP3/WDNST TP3/MSSBT TP3/JSJY3T TP3/JSJY1T TP3/JSJY1T TP3/JSJXT TP3/JSJS1T TP3/JSJKT TP3/JSJG3T TP3/JSJG2T TP3/JSJG1T TP3/JSJGT TP3/GYKZT TP3/GRDNT TP3/DNXXT TP3/DNAHT TP3/DMTST TP3T TP29/JSJST TP24/JQRJT TP13/KZLLT TP1/XXYKT TP1/KZYJT TP/ZDHXT TP/ZDHBT TP/DNYXT TPT TPT TPT TPT TPT TN99/DZJST TN99/DZJST TN94/ZGYXT TN94/WXDYT TN94/SYYYT TN94/DSJST TN93/GBYD1T TN93/GBYD1T TN919/SJTXT TN914.3/SZSJ T TN91/XDTXT TN91/TXSJ-1 T TN91/TXSJT TN91/DXKXT TN91/DXKBT TN91/DXJS2T TN6/DZYJT TN6T TN-49/DZZT TN4/XDDZT TN4/WDZX1T TN4/WDZXT TN4/DZYDT TN3/BDTJT TN24/ZGJGT TN24/JGZZT TN24/JGYGT TN24/JGJST TN21/HWJST TN201/LZDZT TN2/QJGYT TN1/DZSJT TN0/CGQJT TN/XCDZT TN/WXDT TN/WXDT TN/JRDZT TN/DZYXT TN/DZXBT TN/DZJST TN/DZGCT TN/DZCPT TNT TM93/GWDZT TM93/DZCLT TM925/JYDQT TM925/JDWXT TM925/JDKJT TM925/JDDST TM92/DQZDT TM912/DSJST TM91/DYJST TM52/DYDQT TM5/DQJST TM-49/DQSDT TM-4/DSJT TM/DQYYT TM/DGJS2T TM/DGJST TMT TL/YZNKT TK51/TYNXT TK01/ZGNYT TK01/JNT TJ-4/BQZST TJ/BGKJT TH7/JXYQ1T TH7/FXYQT TH7T TG17/CLBHT TG17T TG115/FXSYT TB9/JLXBT TB9/JLJS1T TB8/SZYST TB7/ZKDWT TB48/ZGBZT TB43T TB302/LHJY2-2 T TB302/LHJY1-1T TB3T TB3T TB3T TB3T TB3T TB13/GCRW T TB11/GCSX T TB/ZGTXT T-65/ZGZL T T-65/ZGBZ T T-65/SJBZ T T-39/XJSX T T39/JSJY3 T T-09/ZGKJ T TT TT TT TT TT T总计S S96S S9/SCKJS S73/ZGYLS S7/SLYRS S7/LYKXS S7S S688/ZGHH S S68/HHS S66/ZGGS1 S S646/SYJS S6/YYXBS S6/YLS S6/BFYYS S5/ZWZZS S48S S47/ZGSWS S45S S432/ZWBL1 S S4/ZWBH-1 S S4/ZWBHS S-4/NYKJS S3/ZWXBS S-3/NYKJS S19/NYHJ2 S S19/NYHJ1 S S19/NCSTS S158/TRFL S S157/ZGST S S157/STBC3 S S157/STBC2 S S157/STBC S S15/TRXBS S15/TRTBS S-11/SJNY S S-09/ZGNS S S/ZGNY1S S/ZGNYS S/ZGNCS S/XDHNS S/NYXTS S/HBNYS SS SS SS SS SS SS SS S总计R R93/ZGZY R R93/ZCYR R91R R9/YXXBR R9/YWFXR R49/ZGKF R R-49/JYM R R-49/JKZY R R-49/JKR R455/ZGYD R R-4/ZNJK R R-4/DZYX R R-4/DZYX R R-4/DZJK 总计r r395/xlys 总计R R395R R395R R394R R392R R392R R37/ZGBD R R37/BDXB R R37R R318/ZGSW R R318/SWYX R R318R R3/ZGKFR R28/ZYYJ R R244R R24R R212R R19/ZGJK R R19/CSR R17/ZGFY R R169R R168/JKYM R R16/JTYS R R16/JTBJ R R151/YYXB R R15/SPYS R R12/ZGGG1 R R1/ZGXXR R-05/YXYZ R R0总计Q Q98/RLXX Q Q96/KCZS Q Q96/KCXB Q Q96/KCTDQ Q96/KCFLQ Q959/SLXB Q Q959/DWFL Q Q95-4/YSDW Q Q95/SCDWQ Q95/DWXZQ Q95/DWXYQ Q95/DWXBQ Q949/ZWFL Q Q949/JWXB Q Q948/ZWST2 Q Q945/ZWSL1 Q Q945/ZWSL Q Q94/ZWYJ1 Q Q94/ZWXTQ Q94/YNZWQ Q94/XBZWQ Q94/WHZWQ Q94/GXZWQ Q93/ZHWSQ Q93/WSWX1 Q Q93/WSWXQ Q93/SWJSQ Q913/WTGS Q Q91/HSQ Q91/GSWXQ Q91/GJZD1 Q Q81/ZGSWQ Q78/SWJSQ Q78/SWGCQ Q7Q Q6/SWWLQ Q5/ZGSWQ Q5/TRCWQ Q5/SWHX1Q Q5/SWHXQ Q5/SMDHQ Q-49/RSWQ Q Q-4/ZXSW2 Q Q-4/ZXSWQ Q4/ZGYYQ Q-4/SWXJQ Q4/SLXBQ Q4/SLXBQ Q4/SLKXQ Q3/YCXBQ Q3/YCQ Q-3/SYSWQ Q2/XBSWQ Q17/SSSWQ Q14/YYSTQ Q14/STXZQ Q14/STXBQ Q13/JPXZQ Q13/JPXBQ Q1/SWXTQ Q1/SWDYQ Q/SWXZQ QQ QQ QQ Q总计P PI/TWXBP P94/SDXBP P94/RDDLP P9-4/DLJX P P931/BCDT P P9/ZXDLP P9/SJDLP P9/GHQYP P9/GHQDP P9/DLYJP P9/DLXBP P9/DLKX1P P9/DLKXP P9/DLJYP P73/HYYHP P73/HYDZP P72/DHHYP P7/HYSJP P7/HYKXP P59/DQHXP P56/ZGDZP P53/DCXZP P5-1/DZPL P P5-1/DQKX P P51/CJXBP P5/SJDZP P5/DZXBP P5/DZKXP P-49/DQP P4-4/QXZS P P4/QXXBP P4/QXP P4/GYQXP P4/DQKXP P343/HBKX P P33/SWP P315/SJDZ P P315/DZYJ P P315/DZXB P P315/DZP P31P P3/DQWLP P3/DQKXP P28/ZGFYP P28/DTP P2/CHXBP P2/CHTBP P1/TWAHP P总计O O69/YYHXO O69/JSJYO O658/SPO O65/FXHXO O65/FXCS1 O O643/FZCH O O643/CHXB O O6-4/ZXHX3 O O64/ZXHX1O O64/JGHXO O64/HXWLO O6-4/HXJY O O6-4/HXJX O O634.4O O63/GFZXO O63/GFZT1 O O63O O62/YJHX1 O O615/HHXY O O614/ZGXT O O61/WJHXO O6/HXYJO O6/HXXBO O6/HXTBO O6/HXJZO O6/GDXXO O6/DXHXO O6O O6O O572/GZXB O O57/GNWL1 O O56/YZYFO O52/GYWLO O51/DWYCO O51/DWWL1 O O47/BDTXO O4-4/ZXWL O O4-4/XDWL O O4-4/WLTB O O4-4/WLJX3 O O4-4/WLJX1 O O4-4/WLJS O O4-4/GJWL O O439/GXJS O O433/WPFX O O433/GPXY O O4-3/WLSY O O43/GXXBO O429/YYSX O O42/SXXBO O41/JSWLO O-4/ZXSSO O4/WLXJO O4/WLXBO O4/WLO O4/DXWLO O4/BPXZO O39/YYLX1 O O39/SYLXO O3-1/LXJZ O O3/LXYSO O3/LXXBO O3/lxjkO O29/YYSX3 O O29/YYSX2 O O29/YYSX1 O O29/YYGLO O29/GXYYO O24/SZJSO O24/JSSXO O24/GDXXO O21/SLTJO O1-4/ZXSX6 O O1-4/ZXSX4 O O1-4/ZXSX3 O O1-4/ZXSX2 O O1-4/ZXSX12 O O1-4/ZXSX-1 O O1-4/ZXSX1 O O1-4/ZXSSO O1-4/ZDSXO O1-4/XXSXO O1-4/SXTXO O1-4/SXTBO O1-4/SXJYO O1-4/SXJX6 O O1-4/SXJX5 O O1-4/SXJXO O1-4/GZSXO O1-4/FJZXO O1-4/CZSXO O1-0/SXYJO O1/SXZZO O1/SXXBO O1/SXNK1O O1/SXJZO O1/DBSXO O1O O1O O/SXWLO OO O总计N N94/XTKXN N94/XTGCN N94/MHXTN N91/ZRYRN N91/DZRN N91/BWN N8/ZYKXN N8/ZRZY3N N55N N49/ZGQNN N49/QNKXN N49/KXZYN N49/KXYSN N49/KXSJ1N N49/KXSHN N49/KXHB1N N49/KXESN N49/KXDGN N49/KHSJN N49/JTSHN N49/GJSTN N49/DZKXN N4/ZXKJN N4/KXYWN N33/SYSN N3/SYJSN N19/SJFMN N11/GWKJ1N N1/ZSJSN N1/ZRKX1N N1/SJKJN N1/KJXXN N1/KJTBN N1/JRKJN N1/GKJYN N09/ZRKXN N05/KXDSN N05/KJJBN N031/ZRBZ5 N N031/ZRBZ2 N N031/ZRBZ2 N N0/YYKXN N/ZRZZN N/ZGKX6N N/ZGKX5N N/ZGKX4N N/ZGKX3N N/ZGKX12N N/ZGKX11N N/SJKX3N N/KXTBN N/KXJS2N N/KXN N总计K K928/ZGXBK K928/FJMSK K928.9/LYZL K K926/TWYJK K926/DYYJK K924/XYYJK K92/SSLYK K92/LYTDK K92/LYK K92/LXJ1K K9/ZGLSK K9/ZGLSK K9/ZGGJK K9/RWDLK K9/DLK K9/DLK K89/XGFQK K89/MSYJK K87/ZGLSK K87/DHYJK K87K K852/GJZL1 K K85/ZYWWK K85/WWK K85/SCJK K85/NYKGK K85/KGYWK K85/KGK K85/GGBWK K820/ZHYCK K81/YHCQK K81/RWK K81/MRZJK K81/MRZJK K-49/LSXXK K29/ZZJGK K29/SHTK K28/ZGZXK K27/MGDAK K27/MGDAK K27/DDZGK K265/KRZZK K26/DJNBK K25K K249/QSYJ1 K K24/MQSK K23/XQQHK K206.6/DACQ K K206.6/DACQ K K203/XWHSK K2/ZHK K2/ZGXDK K2/ZGSY1K K2/ZGSYK K2/ZGSYK K2/ZGSYK K2/ZGJDK K2/WSZZK K2/WSJHK K2/WSJHK K2/JDSYK K2/JDSYK K2/GZWSK K2/DSYJ1K K2/AHSXK K1/SJLSK K06/HQHRK K0/SXYKK K0/SXYKK K0/SXLLK K0/SXLLK K0/SXJK-1K K0/LSX1K K0/LSX1K K/ZXLS2K K/ZXLS2K K/ZXLSK K/ZXLSK K/LSYJK K/LSYJK K/LSJX1K K/LSJXK K/LSJXK KK KK KK KK KK KK KK KK KK KK KK KK KK KK KK KK K总计J J90/BJDY J J9/ZGDSJ J9/ZGDSJ J9/SJDYJ J9/SJDYJ J9/KDYJ J9/HQYMJ J9/DZDYJ J9/DZDYJ J9/DZDSJ J9/DZDSJ J9/DYYSJ J9/DYXZJ J9/DYWXJ J9/DYPJJ J9/DDDYJ J9/DDDSJ J82/NQBD J J82/JZJJ J8/ZGXJJ J8/ZGJJJ J8/XJYSJ J8/XJSJJ J8/XJJ J8/SHXJJ J8/JBJ J8/DDXJJ J7/WDJ J647.6/JX J J64/ZGYY J J64/CKJ J6/ZXXY1 J J6/ZGYY1 J J6/YYYSJ J6/YYYJJ J6/YYTSJ J6/YYTDJ J6/YYSJJ J6/YYSHJ J6/YYCZJ J6/YYAHJ J6/YXSJJ J6/YFXSJ J6/TSGQJ J6/RMYYJ J6/JKCJ J6/GQJ J6/GBGX5 J J6/AYJ J525/xjs J J52/ZGGG J J5/ZSJ J4/ZGSY1J J4/ZGSYJ J4/SYSJJ J4/RXSYJ J4/DZSYJ J29/ZGSF J J29/ZGSF J J29/XZJ J29/SYH1 J J29/SFJ J29/QSNS J J22/ZGZX J J22/ZGYH J J22/GHJJ J2/ZGMHJ J2/YMDSJ J2/SJZSJ J2/SHYS1 J J2/MSZYJ J2/MSXDJ J2/MSJJ J2/MSGCJ J2/MSDGJ J2/MHYKJ J2/LHHBJ J2/HKJ J2J J1/XMSJ J1/SJMSJ J1/MYJ J1/MSYJ-1 J J1/MSYJ-1 J J1/MSJ J052J J022/MHSH J J0/YSGJJ J0/SHYSJ J0/MSXBJ J/ZXYS1J J/YSSJ-1 J J/YSSJJ J/XDYSJ J/MZYSJ J/FJYSJ J/DFYSJ JJ JJ JJ JJ JJ JJ JJ JJ J总计I I512/ELSW I I29/SHI I29/QHHI I29/MZWX I I29/BJWX I I28/ETWX1 I I27/ZGGSI I27/MJGSI I27/LMZI I27/JGCQ1I I27/JGCQI I27/CQWXI I26/ZWXKI I26/ZHSWI I26/SWXKI I26/SWBJI I26/SW1I I26/SWI I26/SB1I I26/MWI I25/ZJWXI I25/BGWX2I I247.5/CPXS I I242.1/PSLY I I24/ZPXSI I24/ZHXSI I24/XXSXI I24/XSYKI I24/XSYB1I I24/XSYBI I24/XSXKI I24/XSJI I24/WXXSI I24/TSXSI I24/MQXS1I I24/GSHI I24/DPXSI I24/DDXSI I24/CQZJI I24/CQGSI I23/XJBI I22/XX1I I22/SXKI I22/SWSI I22/SWSI I22/SLI I22/SKI I22/SCI I218/BHI I217.1I I217.1I I210/LXYJI I21/WXYRI I207/HLMXI I206/ZPYZI I206/XSPLI I206/WYZMI I206/GDWXI I206.2/DFYJ I I206I I20/ZGXD2I I20/ZGXD2I I20/ZGXDI I20/ZGGDI I20/XWXSI I20/WYYJI I20/WYPLI I20/WXPL I I20/WXPL I I20/WXPL I I20/DDZJ I I20/DDWT I I2/ZSI I2/ZPI I2/ZMNI I2/ZJTD I I2/ZHWX2 I I2/ZGZJ I I2/ZGZJ I I2/ZGXY I I2/ZGWX I I2/ZGWX I I2/YH-1 I I2/YH1I I2/XMWX I I2/XHI I2/WXYC I I2/TY1I I2/TQWX I I2/TGWX I I2/SYI I2/SHXS I I2/SHWX1 I I2/SHWX1 I I2/SH-1 I I2/SH-1 I I2/SFI I2/SDWX1 I I2/SDWX1 I I2/SDWX I I2/SCWX I I2/RMWX I I2/RMWX I I2/QNZJ I I2/QNWX1 I I2/QNWX I I2/QNWX I I2/QMI I2/QCI I2/MZI I2/MYI I2/LDI I2/JNI I2/JNI I2/JFJW I I2/HY2I I2/HY-1 I I2/HX1I I2/HSWT I I2/HHI I2/HCI I2/GZWY I I2/GXWX I I2/FTI I2/FRI I2/FRI I2/FJWXI I2/FCI I2/DDRI I2/DDI I2/CJWYI I2/CC1I I2/BJWXI I2/BHZI I2/BHZI I2/BFWXI I2I I2I I11/WGWXI I106/WYLL I I106/WXZY I I106/WGWX I I106/WGWX I I10/WGWX-1 I I10/WGWXI I1/YLI I1/WGWYI I1/WGWYI I1/WGWXI I1/SJWXI I1/GWWXI I1/DDWGI I1/DDWGI I055I I04/XZI I02/MZXSI I0-03/ZGBJ I I0-03/ZGBJ I I0/WYLL-1 I I0/WYLLI I0/LLYC1I I0I II II II II II II I总计H H4H H36/RYZSH H36/RYZSH H36/RYXX1 H H36/RYXX1 H H35/ZGEYH H35/EYXXH H33/DYXXH H33/DYXXH H31/ZXYY2 H H31/ZXYY1 H H31/ZXXYH H31/ZXSY1 H H31/YYZXH H31/YYZSH H31/YYXXH H31/YYSLH H31/YYHK1 H H31/YYHK H H31/YYFD H H31/KJYY H H31/FYXX H H31/FYXX H H31/DXYY H H3/ZXXWH H3/XDWYH H3/WYYWH H3/WYYJH H3/WYXKH H3/WYJX8 H H3/WYJXH H3/WYJH H3/WGYH H3/TJWGH H3/SDWYH H3/GWWY1 H H3/FJWYH H2/YYYFH H2/MZYWH H19/ZXSZ H H19/ZXSY H H19/XXYW H H19/SJHY H H15/YYXZ H H102H H1/ZXYW3 H H1/ZXYW3 H H1/ZXYW1 H H1/ZXYWH H1/ZWZX1 H H1/ZWZX1 H H1/ZWZXH H1/ZWCGH H1/ZGYWH H1/ZGYWH H1/YWZS1 H H1/YWYKH H1/YWYJH H1/YWXX2 H H1/YWXX2 H H1/YWXKH H1/YWSJH H1/YWJX5 H H1/YWJX4 H H1/YWJX2 H H1/YWJX11 H H1/YWJS2 H H1/YDYXH H1/XYWH H1/XXYWH H1/XCXXH H1/HZWHH H1/HYXXH H1/GHYYH H09/ZGYY H H059/ZGKJ H H059/ZGFYH H019/YJYK H H019/YJYK H H0/YYYJ1H H0/YYWZ1H H0/YYWZH H0/YYJXH H0/FY1H H0/DDYYH H总计G G9/JYG G899/QPG G89/WQTDG G89G G8-64/TYHB G G861/YYJK G G86/YYG G852/ZHWS G G85/WLG G85/WHG G85/WDG G85/QJYGG G85/JWG G845/WQTD G G843G G842/ZGPQ G G841/TYSK G G841/LQG G84/ZQSJG G84/PPSJG G82/TJG G812/ZGXX G G806/YDXX G G80/ZGTYG G80/XTYG G80/TYKYG G80/TYKXG G80/HBTYG G8/WHMXG G8/TYYKG G8/TYXKG G8/TYSJG G8/TYJX3G G8/TYDKG G8/TYBLG G8/DDTYG G8/BG G8G G78/ZHJJG G78/SNETG G78/JTJY1 G G78/FMBDG G77/ZGXWG G76/ZGTSG G75/MZJYG G72/ZGCRG G72/XDYJG G72/KFJYG G72/KFJYG G72/KFJYG G72/CRJY2G G72/CRJYG G72/CCYJG G719.1/SJZYG G71/ZYJS1G G71/JYYZG G65/JYKX2G G65/JYKX1G G65/JSJYG G65/JSJYG G65G G648/SZXRG G645/DXSG G641/SXLL1G G64/ZGGJG G64/ZGGD1G G64/ZGGDG G64/ZGGDG G64/ZGDXG G64/ZGDXG G64/ZGDXG G64/ZGDXG G64/SXJYG G64/QHDXG G64/JYCKG G64/JXYYG G64/JXYYG G64/JXYYG G64/JSGJG G64/GDJY2G G64/GDJY2G G64/GDJYG G64/GDJYG G64/GDGCG G64/FDJYG G64/FDJYG G64/BJDXG G638/JYDKG G637/ZXXXG G633-3/SYJXG G633/ZXWK1G G633/ZXJYG G633/ZGMSG G633.8/ZXHXG G633.7/ZXWLG G633.67G G633.67G G633.6/ZXSXG G633.5/LSDLG G633.4/ZXWY-1 G G633.34G G633.3/ZXYWG G633.2/ZXZZG G632/KSG G631/SXZZG G63/YSWXG G63/XKJYG G63/SZJYG G63/JXYKG G63/JCJYG G622G G62/ZXXJG G62/XXJXG G62/XXJXG G62/XDZX1G G62/XDZXG G62/JXYKG G62/JXJYG G62/FJJYG G62/FDY1G G62/BJJYG G61/ZQJYG G61/YEJYG G61/XQJY2G G61/XQJY2G G61/XQJY1G G603/TJJY1G G603/SCJYG G603/NMGJG G603/LNJYG G603/HNJY-2 G G603/HBJY1G G603/HBJYG G60/JYYJG G6/XJYG G6/RMJYG G59/JYSYG G527/TQJYG G52/JXJYG G52/JSJY-1G G51/SJJYG G5/WGZXG G5/WGJY4G G5/BJJYG G5/BJJYG G47/ZXXGG G45/JSBLG G45G G434/JYXXG G431/ZXXDG G431/WYDH1G G431/DHJY1G G431/DHJY1G G43/ZGDHG G424/ZGKSG G423G G42/SHJYG G42/LKKSG G42/KCJCG G42/KCJCG G42/JYYJG G42/JXYGG G42G G40-03/qqjy G G40-012/SZJY G G40/ZGJY1G G40/JYYSG G40/JYYJG G40/JYX1G G40/JYX1G G40/JYPL G G40/JYLL G G40/JYFZ G G40/JYFZ G G40/JYCK G G4/XDZXG G4/TJJYG G4/SHJYG G4/SHJYG G4G G4G G35/ZGXX G G35/XDQB G G35/QBZZ G G35/QBZL G G35/QBZL G G35/QBXB G G35/QBLL G G35/QBKX G G311/KXGL G G311/KXGL G G311/JSYC G G31/ZGKX G G31/KYGL G G31/HDKJ G G303/YCG G303/WLYF G G303/WLYF G G303/FZYJ G G30/ZGRK G G30/ZGRK G G30/ZGRK G G30/ZGKJ G G30/RKXG G30/KXXY1 G G30/KXXY1 G G3/ZGJCG G3/KXZGG G3/KXXYG G3/KXJJG G27/ZGDA G G27/LSDA G G27/LSDA G G27/DAXT G G27/DAXG G25/ZGTS G G25/YNTS G G25/XXGL G G25/XDTS G G25/TSYQ G G25/TSQB3 G G25/TSQB1 G G25/TSQB1 G G25/TSQB G G25/TSGZ3 G G25/TSGY G G25/TSGX9 G G25/TSGX3 G G25/TSGX2 G G25/TSGL2G G25/TSGJ1 G G25/TSGJG G25/TSGG9 G G25/TSGG11 G G25/TSG1G G25/SCTS1 G G25/HNTS1 G G25/GXTS1 G G25/GJTS1 G G25/DXTS1 G G25G G25G G24/BXSYG G236/ZGTS G G236/ZGTS G G23/ZGKJG G23/ZGBJG G23/CBGZ1 G G23/CBGJG G23/BLQSG G23/BLQSG G23/BJZY1 G G23/BJXKG G23/BJXBG G23G G22/ZGGBG G214/XWJZ G G21/ZGJZG G21/XWZXG G21/XWYXG G21/XWYC1 G G21/XWSJG G21/XWDXG G21/XWCBG G21/JZGCG G21/GJXWG G21/CMGCG G202/XXXT G G202G G20/ZWXX1 G G2/ZGDJG G2G G115/ZWWH G G1/SJWXG G1/SJWXG G0/ZGWH1G G0/ZGWH1G G0/WHYJG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG GG G总计F FO/JJPLF FO/JJPLF FO/DDJJF FO/DDJJF F832/CJF F831/GJJRF F831/GJJRF F83/ZGJRF F83/JRYJ1F F822/ZGQBF F820.3/WHGL F F81/SWYJF F80/CKYJF F8/ZQSCF F8/ZGTZF F8/ZGTZF F8/SJJJF F8/SJJJF F8/JRYBF F8/DDJJF F8/DDCJF F8/CZYSF F8/CZYJF F8/CKYKF F8/CJLLF F752/GJSCF F74/WMJJF F74/WMJJF F74/SHDWF F74/GJMY3F F74/GJMYF F727/ZGWJF F726/ZGSCF F72/SMJJF F72/SMJJF F716/DZSW1F F716/DZSWF F714/JGLLF F713/XDGGF F713/GJGGF F713.5/SCYX F F713.5/SCYX F F713.36/DZSW F F713.36/DZSW F F7/SYYJF F7/SYJJ3F F7/SJMJF F7/CMYJF F59/LYXKF F5/ZHYSF F42/ZGGY1F F42/ZGGY1F F406/QYGLF F4F F32/ZGNC1F F32/ZGNCF F32/NYXDF F3/ZGTD1F F3/XZQYF F3/STJJF F3/STJJF F3/NYJJ2F F3/NYJJ1F F3/NYJJF F3/DYSJF F299.2F F293/ZZYF1F F29/ZGFDF F29/TQJJF F29/CSWJ1F F29/CSWJ1F F29F F276/XZLTF F270/ZWQYF F27/ZGZLF F27/ZGSYF F27/XDGSF F27/QYYJF F27/QYGLF F27/JJZHF F27/JJXJF F27/HDJJF F27F F25/ZGWLF F24/RLZY1F F24/RLZY1F F24/RLZYF F239/SJWZF F239/HBSJF F23/KJYJF F23/CWYK2F F23/CWYKF F224.5/XMGLF F22/SLJJ1F F204/KJGLF F2/WGJJ2F F2/WGJJ2F F2/JZGCF F2/JYYGF F2/JYGLF F2/JJYG1F F2/JJTZ2F F2/JJGLF F2/JJGLF F2/HGJJF F2/GYZCF F2/GMJJ2F F2/GMJJ2F F129/ZGJJF F129/JJSF F127/SHJJF F127/GGF F127/CSJJF F127.4F F127.2/KFDB F F124/ZYKFF F124/ZGKJF F124/KFYJF F124/GGYZF F123/SHGGF F12-1/ZGJJ F F121/TZGGF F12/ZGSHF F12/ZGGGF F12/ZGGCF F12/XXBF F12/SHJJF F12/JSJJF F12/JJWTF F12/JJLTF F12/JJJWF F12F F112/JJSHF F11/SJJJ6F F11/SJJJ4F F11/SJJJF F11/GJHZF F-1/ZYXXF F-1/XDJJF F1/SJJJF F1/SJJJF F1/JJPLF F1/JJPLF F1/JJDL1F F1/JJDL1F F062/ZSJJF F04/SHZYF F04/SHZYF F015/HGJJF F0/SLLYF F0/LLJJF F0/JJSF F/ZGJJF F/SJJJF F/NKJJ1F F/JJYJ4F F/JJYJ2F F/JJYJF F/JJYJF F/JJXDF F/JJXDF F/JJWT1F F/JJLLF F/JJLLF F/JJKXF F/JJDBF F/CMJJF F/CJYJ1F F/CJWTF F/CJKXF F/CJJF F/BJGSF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F总计E E92/XDBQE E9/XDJSE E52/DDHJE E29/TSLS1E E29/JSSLE E29/JSLSE E22E E1/SJJSE E总计d dJ6/HZ总计D D99/GJFXD D926/ZHRM1D D926/ZHRMD D926/ZGLSD D923/ZSCQD D923.41/ZGBQD D922/LDHSD D92/ZGFXD D92/XFXXD D918D D916/LSYFD D915/SSFXD D91/XSFXD D90/FLXFD D9/ZZYFD D9/ZZYFD D9/ZWFXD D9/ZWFXD D9/ZWFXD D9/ZFLTD D9/XDFXD D9/RMSFD D9/MZYFD D9/MSFXD D9/HQFLD D9/HBFXD D9/FZYXD D9/FZYSD D9/FZYJD D9/FXZZD D9/FXYJD D9/FXPLD D9/FXJD D9/FXD D9/FSYJD D9/FLYSD D9/FLKXD D9D D82/ZGWJD D815/GJLTD D8/XDGJD D773/LDMZD D77/MGYJD D737/ALBSD D735/NYYJD D7313/RBXL D D7313/RBXL D D7313/RBWT D D7313/RBWT D D731/RBXKD D731/RBXKD D731.3/RBYJ D D677.5D D675.8D D675.8D D675.59D D67/ZGXZD D664D D64/SXZZ2D D64/SXZZ2D D64/SXZZ1D D64/SXJYD D64/QXD D633/MZYJ1 D D633/HZYJD D633/GZMZD D630/LDKXD D63/ZGXZ D D63/GJXZ D D622D D62/ZHRM D D619/JRZG D D618/TSD D61/ZGGQ D D61/XSYD D61/TYLT D D61/LLQY D D60/LLYG D D60/JCTS D D60/BYTN D D60/BYTD D60/BYTD D60/BYTD D6/ZGZZD D6/SSZLD D6/LWD D6/LWD D6/HQWGD D6D D6D D6D D6D D54/GJZW1 D D51/GJWT1 D D50/SJZZ D D50/SJZZ D D5/GJZZD D5/DDSJD D5D D45/ZGFN D D45/ZGFN D D44/ZYD D44/ZYD D44/SJFL D D44/NYD D44/FNZY D D44/FNSH D D44D D44D D43/ZGQN1 D D43/ZGQN D D43/XYDD D43/SZQN D D43/SDQN1 D D43/QSND D D43/QSND D D43/QNYS D D43/QNYD D D43/QNTS D D43/QNBL D D43/QNBL D D43/NQRD D43/LNQN D D43/DDXS D D43/DDQN1 D D43/DDQN D D42/XNCD D29/HJSDD D261/DZGB D D26/ZBSHD D26/MZHBD D26/DJYJD D26/DJWHD D23/ZGDSD D23/XCD D23/DSYJD D23/DSWHD D23/DDWXD D23/DDWXD D23/BNCD D23/BNCD D20/SSQSD D20/QSD D20/LLTTD D20/DZLTD D20/DZGBD D2/ZGGCD D2/CBXKD D18/SJSHD D1/KXSHD D07/ZZXYD D07/ZZXYD D07/ZZXD D06/SJMZD D035/GGXZ1 D D0-0/SHZY D D0/ZGTSD D0/SHZYD D0/LLDKD D0/GWLLD D0/GWLLD D0/GJZZD D0/GCYSD D0/DDSJ1D D0/DDSJ1D D/DZZSD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD DD D总计C C96/ZGRCC C96/RLZYC C96/RLZYC C96/RCKFC C96/GJRCC C931.4/BGSY C C93/ZWGL1C C93/ZGGLC C93/SHGLC C93/MSZYC C93/MSC C93/JCYXC C93/GLXDC C93/GLXDC C93/GLSJC C93/GLSJC C93/GLPLC C93/GLPLC C93/GLKXC C93/GLKXC C93/GLKXC C93C C92/ZGRK1C C92/ZGRK1C C92/ZGRKC C92/ZGRKC C92/RKYJ1C C92/RKYJ1C C92/RKYJC C92/RKYJC C92/RKXKC C913/ZY2C C913/ZGLNC C913/ZGCJC C913/XXC C913/XDJTC C913/TXSHC C913/RZCC C913/QSNF1 C C913/QNYJC C913/QNYJC C913/QNYJC C913/LTZZC C913/LAHYC C913/JTC C913/JTC C913/JTC C913/AQHYC C913.2/ZGDX C C913C C913C C913C C912/XDJJC C912/GGSJC C912.8/XMZK C C912.8/SQC C912.8/SQC C91/SLSHC C91/SHXY4C C91/SHXY4C C91/SHXY4C C91/SHXC C91/SHX。
AWARD主板代码大全(BIOS-ID)
2A5UI OPTi 82C822/596/597
2A5UI OPTi 82C596/546/82
2A5UL OPTi 82C822/571/572
2A5UM OPTi 82C822/546/547
2A5UN OPTi Viper 82C556/557/558 (-M)
6A6LK VIA VT8371 (KX133)
6A6LL VIA VT8605 (PM133)
6A6LM VIA VT8363 (KT133 / KT133A / KT133E)
6A6LN VIA VT8365 / VT8364 (KM133 / KL133 / KLE133)
6A6LO VIA VT8601 (PLE133)
2A5KB ALi M1449/51
2A5KE ALi M1511 (Aladdin II)
2A5KF ALi M1521 / M1523 (Aladdin III)
2A5KI ALi M1531 / M 1543 (Aladdin IV / IV+)
2A5KK ALi M1541 / M1542 (Aladdin V / V+)
2B597 Intel Mercury EISA
2B59A Intel Neptune EISA
2B59F Intel 430HX EISA
2B69D Intel Orion EISA
2C460 UNIchip U4800-VLX
2C470 Hyundai HYF82481
2C4D2 HiNT SC8006 (Sierra), HMC82C206
海德汉光栅尺技术参数(用于NC数控机床)(HEIDENHAIN)
用于NC数控机床
2007年6月
更多信息，请访问 或来函索取。
产品样本： • 敞开式直线光栅尺 • 内置轴承角度编码器 • 无内置轴承角度编码器 • 旋转编码器 • HEIDENHAIN后续电子设备 • HEIDENHAIN数控系统 • 机床检测和验收测试测量系统
扫描单元
密封条
安装板
LC 183封闭式直线光栅尺结构示意图
DIADUR 光栅尺
光源
光电池
5
选型指南
纤细外壳的直线光栅尺
纤细外壳的直线光栅尺主要用于安装空间 有限的地方。如果使用安装板或固定元件， 可实现较大测量范围和支持更高加速度 载荷。
绝对式直线光栅尺 • 玻璃光栅尺
高重复性增量式 直线光栅尺 • 钢光栅尺 • 信号周期小
光栅尺栅距越小，光电扫描的衍射现象越严 重。HEIDENHAIN公司的直线光栅尺采用两 种扫描原理：
• 成像扫描原理，用于20 µm和40 µm栅距 光栅尺。
• 干涉扫描原理，用于栅距8 µm甚至更小 光栅。
成像扫描原理 简单的说，成像扫描原理是采用透射光生成 信号：栅距相同或相近的光栅尺和扫描光栅 彼此相对运动。扫描光栅的基体是透明的， 而作为测量基准的光栅尺可以是透明的也 可以是反射的。
带距离编码参考点光栅尺或编码器，其绝对 参考点位置通过累计两个参考点间信号周 期数并用以下公式计算：
P1 = (abs B-sgn B-1) x
N 2
+ (sgn B-sgn
D) x
abs MRR 2
其中： B = 2 x MRR-N
和：
N
P1 = 信号周期中代表移过第一个参考点
的位置
D
abs = 绝对值
RQA0008NXAQS中文资料
RQA0008NXAQSSilicon N-Channel MOS FETREJ03G1569-0100Rev.1.00Jul 04, 2007Features• High Output Power, High Gain, High EfficiencyPout = +36 dBm, Linear Gain = 18 dB, PAE = 65% (f = 520 MHz)• Compact package capable of surface mountingOutline*UPAK is a trademark of Renesas Technology Corp.Absolute Maximum Ratings(Ta = 25°C)UnitRatingsItem SymbolDrain to source voltage V DSS 16 V Gate to source voltage V GSS ±5 V Drain current I D 2.4 A Channel dissipation Pch note 10 W Channel temperature Tch 150 °CStorage temperature Tstg –55 to +150 °CNote: Value at Tc = 25°CThis device is sensitive to electro static discharge. An adequate careful handling procedure is requested.Electrical Characteristics(Ta = 25°C)Item Symbol Min. Typ Max. Unit Test ConditionsZero gate voltage drain current I DSS — — 10 µA V DS = 16 V, V GS = 0 Gate to source leak current I GSS — — ±2 µA V GS = ±5 V, V DS = 0 Gate to source cutoff voltage V GS(off) 0.15 0.4 0.8 V V DS = 6 V, I D = 1 mA Forward Transfer Admittance |yfs| — 2.4 — S V DS = 6 V, I D = 1.2 A Input capacitance Ciss — 44 — pF V GS = 5 V, V DS = 0, f = 1 MHz Output capacitance Coss — 25 — pF V DS = 6 V, V GS = 0, f = 1 MHz Reverse transfer capacitance Crss — 6.0 — pF V DG = 6 V, V GS = 0, f = 1 MHz — 36 — dBm Output Power Pout — 3.98 — WPower Added Efficiency PAE — 65 — % V DS = 6 V, I DQ = 400 mAf = 520 MHz, Pin = +20 dBmMain CharacteristicsEvaluation Circuit (f = 520 MHz)S Parameter(V DS = 6 V, I DQ = 400 mA, Zo = 50 Ω)S11 S21 S12 S22(deg.) MAG ANG(deg.)(deg.)MAG ANGf(MHz) MAG ANG(deg.) MAG ANG100 0.883 -170.0 8.48 84.9 0.021 -3.0 0.867 -175.4 150 0.904 -175.7 5.46 80.1 0.021 -5.3 0.879 -177.3 200 0.902 -178.2 4.13 72.6 0.021 -12.0 0.872 -178.5 250 0.900 179.6 3.30 67.1 0.021 -16.5 0.872 -179.7 300 0.898 177.8 2.75 61.6 0.021 -19.8 0.873 179.5 350 0.898 176.2 2.34 56.2 0.020 -24.2 0.873 178.8 400 0.897 174.8 2.04 50.9 0.020 -27.7 0.874 178.4 450 0.898 173.4 1.80 45.7 0.020 -31.3 0.873 177.8 500 0.899 172.3 1.61 40.7 0.020 -34.4 0.873 177.4 550 0.900 171.2 1.46 35.5 0.019 -38.2 0.875 176.8 600 0.900 170.1 1.33 30.5 0.019 -41.5 0.876 176.5 650 0.899 169.0 1.22 25.5 0.019 -45.0 0.876 176.0 700 0.899 167.9 1.13 20.5 0.019 -47.8 0.878 175.6 750 0.899 166.9 1.04 15.6 0.018 -51.2 0.878 175.2 800 0.898 165.8 0.97 10.6 0.018 -54.8 0.880 174.9 850 0.899 164.7 0.91 5.7 0.018 -57.4 0.878 174.4 900 0.901 163.7 0.85 0.9 0.018 -60.9 0.880 173.9 950 0.903 162.7 0.80 -3.9 0.017 -63.5 0.882 173.5 1000 0.903 161.8 0.75 -8.7 0.017 -66.5 0.883 173.1 1050 0.903 160.8 0.71 -13.4 0.017 -69.3 0.884 172.6 1100 0.905 159.8 0.68 -18.1 0.016 -71.9 0.883 172.1 1150 0.906 158.8 0.64 -22.8 0.016 -74.8 0.886 171.6 1200 0.907 157.8 0.61 -27.3 0.016 -76.8 0.888 171.2 1250 0.909 156.8 0.58 -32.0 0.015 -79.6 0.891 170.8 1300 0.911 155.8 0.55 -36.6 0.015 -81.9 0.893 170.4 1350 0.912 154.9 0.52 -41.2 0.015 -84.1 0.896 170.0 1400 0.912 154.0 0.50 -45.8 0.015 -86.2 0.897 169.5 1450 0.912 153.1 0.48 -50.3 0.014 -88.6 0.898 169.1 1500 0.913 152.1 0.46 -54.8 0.014 -90.2 0.900 168.7 1550 0.914 151.2 0.44 -59.2 0.014 -92.6 0.900 168.4 1600 0.915 150.3 0.42 -63.8 0.014 -94.1 0.902 167.8 1650 0.916 149.4 0.40 -68.3 0.013 -95.9 0.903 167.4 1700 0.915 148.5 0.39 -72.6 0.013 -97.6 0.904 167.0 1750 0.914 147.6 0.38 -76.9 0.013 -99.0 0.904 166.4 1800 0.913 146.7 0.36 -81.1 0.013 -100.8 0.906 165.8 1850 0.915 145.7 0.35 -85.3 0.013 -102.2 0.909 165.5 1900 0.920 144.5 0.34 -89.5 0.013 -103.9 0.909 165.0 1950 0.923 143.3 0.33 -93.6 0.013 -105.8 0.910 164.5 2000 0.925 142.3 0.31 -97.9 0.013 -107.2 0.911 163.9 2050 0.926 141.4 0.30 -102.1 0.013 -108.7 0.913 163.5 2100 0.928 140.5 0.29 -106.3 0.013 -109.9 0.914 163.0 2150 0.929 139.6 0.28 -110.6 0.013 -112.2 0.916 162.4 2200 0.930 138.7 0.27 -114.7 0.013 -112.8 0.917 161.8 2250 0.932 137.8 0.27 -118.9 0.013 -114.9 0.921 161.5 2300 0.931 137.1 0.26 -123.0 0.013 -116.5 0.921 161.0 2350 0.930 136.3 0.25 -127.1 0.013 -118.5 0.921 160.5 2400 0.926 135.5 0.24 -131.2 0.013 -120.2 0.924 159.9 2450 0.922 134.4 0.24 -135.4 0.014 -121.9 0.923 159.5 2500 0.920 133.3 0.23 -139.5 0.014 -123.7 0.921 159.0Package DimensionsOrdering InformationPart Name Quantity Shipping Containerφ178 mm reel, 12 mm emboss tapingRQA0008NXTL-E 1000pcs.Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product.Refer to "/en/network " for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology (Shanghai) Co., Ltd.Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145Renesas Technology Malaysia Sdn. BhdUnit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510RENESAS SALES OFFICES。
科尔摩根AKM 同步伺服电机 选型指南说明书
K O L L M O R G E N | A K o l l m o r g e n C O M PA N Y欢迎来到科尔摩根官方微信科尔摩根3目录u AKM ™ 同步伺服电机4u AKD ™ 伺服驱动器8u AKM ™ 各种选件12u AKM ™ 防水型和食品级防水型电机13u AKM ™ 系统综述14u AKM ™ 图纸和性能数据AKM1x 16AKM2x 20AKM3x24AKM4x 28AKM5x 34AKM6x 40AKM7x 44AKM8x48u L 10 轴承疲劳寿命和轴负载53u 反馈选件56u 抱闸选件60u 伺服电机连接器选件61u 型号命名67u MOTIONEERING ® Online71科尔摩根A K M 同步伺服电机选型指南克服设计、采购和时间障碍科尔摩根明白：帮助原始设备制造商的工程师克服障碍，可以显著提高其工作成效。
因而，我们主要通过如下三种方式来提供帮助：集成标准和定制产品在很多情况下，理想方案都不是一成不变的。
我们拥有专业应用知识，可以根据全面的产品组合来修改标准产品或开发全定制解决方案，从而为设计奠定良好的基础。
提供运动控制解决方案而不仅仅是部件在各公司减少供应商数量和工程人力的过程中，他们需要一家能够提供多种集成解决方案的全系统供应商。
科尔摩根就采用了全面响应模式，为客户提供全套解决方案，这些方案将编程软件、工程服务以及同类优秀的运动控制部件结合起来。
覆盖全球我们在美洲、欧洲、中东和亚洲拥有众多直销、工程支持单位、生产工厂以及分销商，临近全球各地的原始设备制造商。
这种便利优势可以加速我们的供货过程，根据客户需要随时随地供货。
财务和运营稳定性科尔摩根隶属于Fortive 公司。
Fortive 业务系统是推动Fortive 各部门发展的一个关键力量。
该系统采用“不断改善”（Kaizen ）原理。
由高素质人才构成的多学科团队使用世界级的工具对过程进行评估，并制定相关计划以达到卓越的性能。
NC7SZ08P5X,NC7SZ08M5X,NC7SZ08FHX, 规格书,Datasheet 资料
®TinyLogic UHS Two-Input AND GateFeaturesUltra-High Speed: t PD 2.7ns (Typical) into 50pF at 5V V CCHigh Output Drive: ±24mA at 3V V CCBroad V CC Operating Range: 1.65V to 5.5VMatches Performance of LCX Operated at 3.3V V CC Power Down High Impedance Inputs/OutputsOver-Voltage Tolerance inputs facilitate 5V to 3V TranslationProprietary Noise/EMI Reduction CircuitryUltra-Small MicroPak™ PackagesSpace-Saving SOT23 and SC70 Packages DescriptionThe NC7SZ08 is a single two-input AND gate from Fairchild’s Ultra-High Speed (UHS) series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a broad V CC operating range. The devise is specified to operate over the 1.65V to 5.5V V CC operating range. The inputs and output are high impedance when V CC is 0V. Inputs tolerate voltages up to 6V, independent of V CC operating voltage.Ordering InformationPart Number Top Mark Eco Status Package Packing MethodNC7SZ08M5X 7Z08 RoHS 5-Lead SOT23, JEDEC MO-178 1.6mm 3000 Units on Tape & ReelNC7SZ08P5X Z08 RoHS 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & ReelNC7SZ08L6X GG RoHS 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & ReelNC7SZ08FHX GG Green 6-Lead,MicroPak2, 1x1mm Body, .35mm Pitch 5000 Units on Tape & ReelFor Fairchild’s definition of Eco Status, please visit: /company/green/rohs_green.html.NC7SZ08 — TinyLogic ® UHS Two-Input AND GateFigure 1. Logic SymbolPin ConfigurationsFigure 2. SC70 and SOT23 (Top View)Figure 3. MicroPak (Top Through View)Pin DefinitionsPin # SC70 / SOT23Pin # MicroPakNameDescription1 1 A Input2 2 B Input3 3 GND Ground4 4 Y Output56 V CC Supply Voltage5 NC No ConnectFunction TableY=ABInputs OutputNC7SZ08 — TinyLogic ® UHS Two-Input AND GateSymbol Parameter Min. Max. UnitV CC Supply Voltage -0.5 6.0 V V IN DC Input Voltage -0.5 6.0 V V OUT DC Output Voltage -0.56.0 V V IN < -0.5V -50 I IK DC Input Diode Current V IN > 6.0V +20 mAV OUT < -0.5V-50I OK DC Output Diode Current V OUT > 6V, V CC =GND+20 mAI OUT DC Output Current±50 mA I CC or I GND DC V CC or Ground Current±50 mA T STG Storage Temperature Range -65 +150 °C T J Junction Temperature Under Bias+150 °C T LJunction Lead Temperature (Soldering, 10 Seconds)+260°CSOT-23 200SC70-5 150MicroPak-6 130 P DPower Dissipation at +85°CMicroPak2-6 120mWHuman Body Model, JESD22-A114 4000 ESD Charged Device Model, JESD22-C1012000VRecommended Operating ConditionsThe Recommended Operating Conditions table defines the conditions for actual device operation. Recommendedoperating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings.Symbol ParameterConditions Min. Max. UnitSupply Voltage Operating 1.65 5.50 V CCSupply Voltage Data Retention1.50 5.50 V V IN Input Voltage 0 5.5VV OUT Output Voltage0 V CC V T A Operating Temperature-40 +85 °C V CC at 1.8V, 2.5V ± 0.2V 0 20® UHS Two-Input AND Gate1.65 1.55 1.65 1.55 1.80 1.70 1.80 1.702.30 2.20 2.30 2.203.00 2.90 3.00 2.904.50V IN =V IH , I OH =-100µA 4.40 4.504.401.65 I OH =-4mA 1.29 1.52 1.292.30 I OH =-8mA 1.90 2.15 1.903.00 I OH =-16mA 2.50 2.80 2.40 3.00 I OH =-24mA 2.40 2.68 2.30VV OHHIGH LevelOutput Voltage4.50 I OH =-32mA 3.90 4.20 3.801.65 0.00 0.10 0.10 1.80 0.00 0.10 0.102.30 0.00 0.10 0.103.00 0.00 0.10 0.104.50V IN =V IL , I OL =100µA 0.00 0.10 0.10 1.65 I OL =4mA 0.80 0.24 0.24 2.30 I OL =8mA 0.10 0.30 0.30 3.00 I OL =16mA 0.15 0.40 0.40 3.00 I OL =24mA 0.22 0.55 0.55 VV OLLOW LevelOutput Voltage4.50 I OL =32mA0.22 0.55 0.55 I IN Input LeakageCurrent0 to 5.5V IN =5.5V, GND±1±10µAI OFF Power OffLeakage Current0 V IN or V OUT =5.5V 1 10 µAI CCQuiescent SupplyCurrent1.65 to 5.50 V IN =5.5V, GND220µA® UHS Two-Input AND Gate5.00 ± 0.500.5 2.2 4.1 0.5 4.4 3.30 ± 0.30 1.53.3 5.2 1.5 5.55.00 ± 0.50 C L =50pF,R L =500Ω0.8 2.7 4.5 0.84.8C IN Input Capacitance 0.00 4 pF 3.30 20 C PDPower DissipationCapacitance (2)5.0025pF Figure 6Note:2. C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operatingcurrent consumption (I CCD ) at no output lading and operating at 50% duty cycle. C PD is related to I CCD dynamic operating current by the expression: I CCD =(C PD )(V CC )(f IN )+(I CC static).Notes:3. C L includes load and stray capacitance.4. Input PRR=1.0MHz; t W 500ns.Figure 4. AC Test CircuitFigure 5. AC Waveforms=1.8ns; PRR=10MHz; Duty Cycle=50%.Test Circuit® UHS Two-Input AND Gate132LAND PATTERN RECOMMENDATIONC 0.10C0.20C A B0.60 REF0.550.35SEATING PLANE0.25GAGE PLANE8°0°NOTES: UNLESS OTHEWISE SPECIFIEDA) THIS PACKAGE CONFORMS TO JEDEC MO-178, ISSUE B, VARIATION AA,B) ALL DIMENSIONS ARE IN MILLIMETERS. 1.45 MAX1.300.900.150.051.900.950.500.301.502.600.701.00SEE DETAIL A0.220.08C) MA05Brev5TOP VIEW (0.30)Figure 7. 5-Lead SOT23, JEDEC MO-178 1.6mmPackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products.Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: /packaging/.Tape and Reel Specifications®UHS Two-Input AND GateFigure 8. 5-Lead, SC70, EIAJ SC-88a, 1.25mm WidePackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any mannerwithout notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verifyor obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specificallythe warranty therein, which covers Fairchild products.Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:/packaging/.Tape and Reel Specifications® UHS Two-Input AND Gate2. DIMENSIONS ARE IN MILLIMETERS1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD MAC06AREVCNotes:3. DRAWING CONFORMS TO ASME Y14.5M-1994TOP VIEWRECOMMENED LAND PATTERNBOTTOM VIEWA0.55MAX0.05C(0.75)(0.52)(0.30)6X 1X6X PIN 1DETAIL A0.075 X 45CHAMFER0.250.150.350.250.400.300.5(0.05) 1.0DETAIL APIN 1 TERMINAL0.400.300.450.350.100.000.10C B A 0.05CC0.05C0.050.005X 5X 6X(0.13)4X6XFigure 9. 6-Lead, MicroPak™, 1.0mm WidePackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products.Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: /packaging/.®UHS Two-Input AND Gate DETAIL A5XFigure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm PitchPackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any mannerwithout notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verifyor obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specificallythe warranty therein, which covers Fairchild products.Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:/packaging/.NC7SZ08 — TinyLogic ® UHS Two-Input AND Gate。
NX8571SC741-BA中文资料
元器件交易网
NX8571 Series
8.2±0.2 5.4
0.3 1.0
PACKAGE DIMENSIONS (UNIT: mm)
8.89±0.13 10 MIN. 1.25
15.24 2.54
7
1
21.8±0.3 1.0 0.8
φ 0.9
8
14
0.5 20.83±0.25 26.04±0.25
monitor, E.O.L
∆ν Pf = 10 mW, CW, 3 dB down
SMSR Pf = 10 mW, CW
RIN Pf = 10 mW, 20 MHz to 3 GHz
Is
Pf = 10 mW, CW
ext Pf = 10 mW, CW
MIN. TYP. MAX. Unit
20
35
°C
1530.33 1530.72 1531.11 1531.50 1531.89 1532.29 1532.68 1533.07 1533.46 1533.85 1534.25 1534.64 1535.03 1535.42 1535.82 1536.21 1536.60 1537.00 1537.39 1537.79 1538.18 1538.58 1538.97 1539.37
Positive Slope (Even channel)
*2 Tracking Error: γ
Pf (mW)
TLD = Tset
10
TLD = Tset, TC = –5 to +70˚C
Pf
γ = 10 log Pf [dB]
10
0
Im
Im
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = Tset, TC = −5 to +70°C)
西门子公司的8DJH紧凑型氢缆电源设备说明书
/8DJHcompactMaximum Functionality on Minimum SpaceGas-Insulated Switchgear 8DJH Compact forSecondary Distribution Systems up to 24 kVProven technology, consequently optimized to save spaceThe ideal compact solution forthe secondary distribution level Where space saving is an important crite-rion, 8DJH Compact makes full use of its strength, thus guaranteeing a high degree of cost-efficiency – maximum functionality on minimum space. It is installed in public and industrial power systems of the secondary distribution level, for example, in local transformer substations of the power supply compa-nies, or in medium-voltage infeeds of infrastructure projects.Proven functionalities combinedwith optimum use of space8DJH Compact offers the proven func-tionalities of switchgear from the 8DJH product family. The product range com-prises the panel block with two ring-main feeders and one transformer feeder, the so-called RRT scheme, and up to the dou-ble panel block RRT-RRT with an overall height of 1,400 mm or 1,700 mm. Trans-former cables are optionally connected from the rear, from the top, or from the side.Due to the small mounting surface com-pared with similar block-type or extend-able switchgear types, 8DJH Compact leaves more space for additional low- voltage feeders, medium-voltage feeders, or Smart Grid functionalities.Shorter transformer cables and reduced expenses for laying these cables inside the compact substation prove to be fur-ther advantages, reducing the investment costs.Perfectly suitable for retrofitting compact substationsWith its very compact dimensions, the8DJH Compact is optimally suitable for retrofitting compact substations. Existing switchgear can easily be replaced by8DJH Compact. This even provides addi-tional free space, which can be used for further functionalities such as low- or medium-voltage feeders.High personal safety andoperational reliabilityFor switchgear operators, personal safety has the highest priority. Here, the 8DJH Compact switchgear sets standards. Tested for resistance to internal faults in accordance with the latest version of the IEC 62271-200 standard (2nd edition)of 2011, it offers maximum personal protection.The sustained growth of megacities makes surface area increasingly scarce and expensive. For this reason, the consequent reduction of space requirements is meanwhile also in the focus of development for switchgear of the secondary distribution level. At the same time, it is necessary to conciliate personal safety and operational reliability with the full scope of functions.8DJH Compact from Siemens, the youngest member of the 8DJH family, provides the optimal response to these requirements. It sets new standards with regard to the compactness of medium-voltage switchgear. Thanks to its compact dimensions, it can be easily installed in new local transformer substations, and is the ideal retrofit switchgear for existing compact substations. Offering the proven functionalities of the 8DJH family, the switchgear can beintegrated in Smart Grids if equipped with the corresponding options.The combination of hermetically tight, welded stainless-steel switchgear vessels and integrated maintenance-free switch-ing devices provides a long service life,even under adverse environmental and climatic influences.H igh cost-efficiency by perfect utilization of existing mounting space. As a result, additional space for further systems in the compact substationP rotection of investment by future-proof technology: Integration in Smart Grids is possibleC ost-efficient retrofittingof compact substationsH igh personal safety and operational reliability byinternal arcing test inaccordance with the latestIEC/EN 62271-200 standard Mechanical interlocks installed in theoperating mechanisms reliably preventmaloperation. Safe operation is guaran-teed by the fact that, due to the systemdesign, the switchgear can only be actu-ated with closed front.The hermetically sealed primary enclosureis safe to touch, and conforms to degreeof protection IP 65 according to IEC 60529for all high-voltage parts of the primarycircuit. The switchgear enclosure con-forms to degree of protection IP 2X as aminimum.Low space requirements, full scope of functionsMastering new challengeswith existing compact substationsToday, compact substations are mostly equipped withg as-insulated switchgear. Under normal operatingc onditions, the expected service life of this equipmentis at least 35 years, probably even 40 to 50 years. Atthe end of the life cycle of such switchgear, or if newf unctionalities become necessary on the same standing area, 8DJH Compact – with its very compact dimensions – offers itself as the ideal retrofit solution.The space gained by the switchgear’s compactnessp ermits the installation of additional feeders in the medium- v oltage or in the low-voltage system, for exam-ple, for c onnecting additional consumers or energy pro-ducers. Thus, 8DJH Compact switchgear creates the basis for s uccessful retrofitting of compact substations. Perfectly prepared for the futureIn a time of intelligent power systems, so-called Smart Grids, compact substations must also be prepared to inte-grate themselves smoothly into the new system control structures. The necessary Smart Grid functionalities, how-ever, require additional space in existing compact substa-tions. Replacing an existing medium-voltage switchgear in a local transformer substation by 8DJH Compact, option-ally equipped with motor operating mechanisms and com-pact telecontrol devices, is a future-proof investment in such cases. Depending on the degree of equipment of the Smart Grid functionality, more benefits will result, such as high availability, fast localization of faults, early detection of overload situations, safe operational management, and the possibility to both regulate decentralized power sup-plies and minimize losses in the distribution system. Apart from that, load characteristics can be recorded and used for optimal planning of system expansions.Tested and safe according to the latest standardDuring the development of 8DJH Compact, particular attention was paid to personal safety, the same as in all other medium- voltage switchgear from Siemens. The results of the tests performed are docu-mented in type-test reports from inde-pendent testing institutes.The switchgear is tested for resistanceto internal faults in accordance with the latest version of the IEC 62271-200 standard (2nd edition) of 2011. In thiscontext, resistance to internal faults wasalso proved for the transformer cablecompartment by removing the solidi nsulation and igniting an arc at theb ushings of the gas vessel, upstreamfrom the fuse. This test simulates thevery improbable case of failure ofthese bushings.To safely control the high pressuresa rising during an arc, the completet ransformer cable compartment, whichalso contains the fuses, features anextremely solid design.FeaturesType of switchgear8DJH Compact switchgear is a factory-assembled, type-tested, three-pole metal-enclosed single-busbar switch-gear for indoor installation.Environmental independenceHermetically tight, welded switchgear vessels made of stainless steel make the parts of the primary circuit under high voltage of 8DJH Compact switchgear insensitive to certain aggressive ambient conditions, such as• saline air,• humidity,• dust and• condensation,as well as tight to ingress of foreign objects,such as• dust,• pollution,• small animals and• humidity.CompactnessThanks to the use of SF6 insulation, compact dimensions are possible. This provides an efficient utilization of existing substation rooms for switchgear, new buildings are less expensive, and surface area in cities is used economically.Maintenance-free designSwitchgear vessels designed as a sealed pressure system with maintenance-free switching devices and enclosed cable plugs ensure:• Maximum supply reliability• Personnel safety• S ealed-for-life design according to IEC 62271-200 (sealed pressure system)• I nstallation, operation, extension, and replacement without SF6 gas work• Reduced operating costs • C ost-efficient investment• N o maintenance cycles.Service lifeUnder normal operating conditions, the expected service life of gas-insulated switchgear 8DJH Compact is at least 35 years, probably 40 to 50 years, taking the tightness of the hermetically welded switchgear vessel into account. The service life is limited by the switchgear devices installed. The maximum number of operating cycles is defined by the standards:• I EC 62271-102 for three-position disconnectors, e arthing switches• I EC 62271-103 for three-position switch-disconnectors, earthing switches.Personal safety• S afe-to-touch and hermetically sealed primary enclosure• S tandard degree of protection IP 65 for all high-voltage parts of the primary circuit, at least IP 2X for the switch-gear enclosure according to IEC 60529 and VDE 0470-1• H igh resistance to internal arcs by logical mechanical interlocks and tested switchgear enclosure• Panels tested for resistance to internal faults up to 21 kA • C apacitive voltage detecting system to verify safe isolation from supply (option for transformer feeders)• D ue to the system design, operation is only possible with closed switchgear enclosure• H V HRC fuses and cable sealing ends are only accessible when outgoing feeders are earthed• F eeder earthing via make-proof earthing switches.Security of operation• H ermetically sealed primary enclosure independent of environmental effects (pollution, humidity and small animals)• W elded switchgear vessels, sealed for life• M aintenance-free in an indoor environment (IEC-62271-1 and VDE 0671-1)• O perating mechanisms of switching devices accessible outside the primary enclosure (switchgear vessel)• C omplete switchgear interlocking system with logical interlocks• M echanical position indicators integrated in the mimic diagram• Minimum fire load.Reliability• T ype and routine-tested• S tandardized and manufactured using numerically controlled machines• Q uality assurance in accordance with DIN EN ISO 9001• S F6-insulated switchgear panels of Siemens in operation worldwide for more than 30 years.Technical dataElectrical data of the switchgear, classification1) Design option.3) Depending on HV HRC fuse-link.8DJH Compact switchgear is classified according to IEC/EN 62271-200/VDE 0671-200. Partition classPM (partition of metal)Loss of service continuity categoryLSC 2Accessibility to compartments (enclosure)– Busbar compartment –S witching-device compartment– Cable compartment– Non-accessible – Non-accessible– Interlock-controlledDesign and constructionDesignation of the internal arc classification IAC IAC classificationRated voltage 7.2 kV to 24 kVIAC A FLRIAC A F (tested with walld istance at the rear ≥3m; use in substations only in connec-tion with internal arcing test according to IEC 62271-202)Type of accessibility A – F – L – RSwitchgear in closed electrical service location, access “for authorized personnel only”(according to IEC/EN 62271-200) Front Lateral Rear Arc test current up to 21 kA Test duration1 sInternal arc classificationRated insulation levelRated voltage U rkV 7.2121517.524Rated short-duration power-frequency withstand voltage U d – p hase-to-phase, phase-to-earth, open contact gap – across the isolating distancekV kV20 2328 32 36 39 38 45 50 60Rated lightning impulse withstand voltage U p – p hase-to-phase, phase-to-earth, open contact gap – across the isolating distancekV kV 60 70 75 8595 11095 110125 145Rated frequency f r Hz50 / 60Rated normal current I r 2)for ring-main feeders A 400 or 630for busbarA 630for transformer feedersA 2003)50 HzRated short-time withstand current I kfor switchgear with t k = 1 sup to kA 2525252520for switchgear with t k = 3 s (design option)up to kA 20Rated peak withstand current I p up to kA 6363636350 Rated short-circuit making current I mafor ring-main feeders up to kA 6363636350for transformer feeders up to kA 636363635060 HzRated short-time withstand current I kfor switchgear with t k = 1 sup to kA 2121212120for switchgear with t k = 3 s (design option)up to kA 2121212120Rated peak withstand current I p up to kA 5555555552Rated short-circuit making current I mafor ring-main feeders up to kA 5555555552for transformer feeders kA 5555555552Filling pressure(pressure values at 20 °C)Rated filling level p re (absolute)kPa 150Minimum functional level p re (absolute)kPa 130Ambient air temperature Twithout secondary equipment °C –25/–401) to +55/+701)with secondary equipment°C –5/–404) to +55/+70 1), 4)for storage/transport including secondary systems°C–40 to +70Degree of protectionfor gas-filled switchgear vessel IP65for switchgear enclosure IP2X/IP3X 1)InstallationShipping data, transportPlace of destination and means of transportExamples for packing Germany/Europe by rail and truckType: OpenPE protective foil pulled over switchgear, with wooden base Overseas by seafreightType: Seaworthy crate (standard)Welded PE protective foil, with closed wooden crate, with desiccant bag Type: Open for container PE protective foil pulled over switchgear, with wooden baseOverseas by airfreightType: OpenPE protective foil pulled over switchgear, with wooden base and lattice or cardboard coverMax. width of switchgear unit Packing weight for Europe Packing weight for overseas mm Approx. kg Approx. kg 85030901,200401201,55050150Packing types (examples)For size and weight of the transport units, see the following tables.Max. width of switchgear unit TU Transport dimensionsEuropeOverseasWidth B Height H Depth T Height H Depth T mm m m m mm8501.10A + 0.201.10A + 0.40, min. 2.001.151,200 1.451,5501.80A = Switchgear heightTransport dimensions for Europe and overseasTransport8DJH Compact switchgear is completely delivered in transport units. Please observe the following:• Transport facilities on site• Transport dimensions and weights • Size of door openings in building.Packing weightTransport weightThe transport weight results from the switchgearweight per transport unit and the packing weight. The packing weight results from the transport dimensions and the type of transport.Panel blockWidth Gross weight for a switchgear height of 1,400 mm 1,700 mm mmApprox. kg Approx. kg R R T 5)700365380R R T 620340345R R T - R 5)1,010475490R R T - R 930450455R R T - R R T 5)1,400730760R R T - R R T1,2406806905) With lateral pressure relief duct.Switchgear weightsThe weight of the switchgear unit results from the sum of the weights per functional unit. Depending on the design and the degree to which it is equipped, different values will result. The table shows mean values.Switchgear weightsThe catalog HA40.2 describes the components and technol-ogy of 8DJH switchgear in a general way, and offers selec-tion criteria for the indicating and measuring equipment used. This equipment is also applicable to 8DJH Compact.Catalog HA40.2Product rangeScheme R R T - R Scheme R R T - R Scheme R R T Scheme R R T Versions with an overall height of 1,700 mm 1)Scheme R R T - R R TScheme R R T - R R TVersions with an overall height of 1,400 mm 1)Product range overview of scheme versions 1) Illustrations show design with IAC A FLR.Scheme Installation dimensionsWidth(design with IAC A FLR) mmWidth(design with IAC A F) mm Depth mm Height mm 2 ring-main feeders, 1 transformer feeder 7006207751,400 1,7003 ring-main feeders, 1 transformer feeder 1,010*******,400 1,7004 ring-main feeders, 2 transformer feeders1,4001,2407751,400 1,700Published by and copyright © 2013:Siemens AGWittelsbacherplatz 280333 MunichGermanySiemens AGInfrastructure & Cities SectorLow and Medium Voltage DivisionMedium Voltage & SystemsMozartstr. 31 C91052 ErlangenGermany/mediumvoltageFor more information,please contact ourCustomer Support Center.Phone: +49 180 524 8437Fax: +49 180 524 2471(Charges depending on provider)E-mail:**********************Low and Medium Voltage DivisionOrder No. IC1000-G320-A160-X-7600 | Printed in Germany fb 5446 RP WS 06135.0Printed on elementary chlorine-free bleached paper.All rights reserved.Trademarks mentioned in this document are the propertyof Siemens AG, its affiliates, or their respective owners.Subject to change without prior notice.The information in this document contains generaldescriptions of the technical options available, whichmay not apply in all cases. The required technicaloptions should therefore be specified in the contract.。
NX8中央控制器的说明书
al a rm e.c omm et àl ad i sp os i ti o ndup ubl ic , v i aw ww .d oc a l ar m e.c om ,d el ad oc um en t at i on te c h ni q ue do nt l e s réf ére n c e s ,m a r q u e s e tl o g o s , s o n t l a p ro p r i ét é d e s n t e u r s r e s p e c t i f sLa centrale NX8 peut gérer des émetteurs radio grâce aux modules NX408EI, NX416EI, NX448EI.Les émetteurs compatibles sont : NX450I, NX451I,NX470I, NX475I, NX480I et NX490I.Le récepteur radio peut s’installer dans le coffret de la centrale. Le raccordement à la carte mère se fait par un bus 3 fils comprenant l’alimentation et les données.L’installation de la carte réceptrice radio nécessite quelques précautions d’installation :Laisser au moins 30 cm au-dessus de la centrale afin de placer les antennes de la carte de réception radioEviter de placer la carte de réception radio dans un endroit humideEviter les armoires métalliques, armoires électriques, les chaufferies etc...Installation Carte réceptionCe chapitre indique l’installation de la carte, la fixation sur le coffret et l’installation des antennes.ATTENTION : Vérifier que vous n’êtes pas chargéélectriquement. Pour cela, toucher le boîtier métallique ou portez un bracelet anti statique pour éviter toute décharge électro statique1/ Après avoir installé le coffret de la NX8, fixer les vis prévues à cet effet avec l’écrou et les rondelles fournies. L’emplacement des vis doit être conforme àla figure 1.Figure 1 : Installation des vis de fixation2/ Installer le guide sans le fixer complètement grâce àla vis auto taraudeuse fournie. L’emplacement de ce guide doit se situer sous les vis fixées au point 1. Voir Figure 2Figure 2 : Préinstallation du guide de maintien de lacarte de réception radio.al a rm e.c omm et àl ad i sp os i ti o nd up ub l ic , v i aw ww .d oc a l ar m e.c om ,d el ae s p e c t if sNX408I - NX416I - NX448IFigure 3 : Installation de la carte dans le coffret4/ Dès que la carte est installée, vissez la vis auto taraudeuse pour fixer solidement la carte5/ Placer les antennes dans les emplacements prévus àcet effet (Voir Figure 4)Figure 4 : InseFirsions des antennes Figure 4 : insertion des antenness r e s p e c t i f sr e s p e c t i f sNX408I - NX416I - NX448Iu r s r e s p e c t i f sNX408I - NX416I - NX448Iw ww .u r s r e s p e c t i f sNX408I - NX416I - NX448ICAD_NX408EI_416EI_448EI_NI.docVersion 1.0Page 11/11。
3G手机上网参数配置查询表
Z780i C510(Kate) C902 Titanium silver C903 C905 CS8 G700商务版 G705 G900 K530i K608i K610i K630i K660i K770i K800i K810i K850i(已验证) Nan P1i P990 P990i Remi(T610复刻版) Ruriko Shinobu SO902i SO902iWP+ SO903i SO905i SO905iCS SO906i T700 T903 V600i V630i V640i W508 W518a W51S W595i W595s W660i W705 W715 W760i W850i W880i
索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信 索尼爱立信
W890i W902i W910i W960i XPERIA X1 XPERIA X2 XPERIA X3 Yari Z1010 Z610i Z750 Z770i Z800c
三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星 三星
SGH-i550w SGH-i560 SGH-i568 SGH-i7110 SGH-i7110c SGH-J200 SGH-L768 SGH-P910 SGH-P920 SGH-T819 SGH-T919 SGH-U700 SGH-W510 SGH-Z105 SGH-Z130 SGH-Z150 SGH-Z170 SGH-Z300 SGH-Z308 SGH-Z350 SGH-Z368 SGH-Z370 SGH-Z400 SGH-Z500 SGH-Z508 SGH-Z510 SGH-Z548 SGH-Z560 SGH-Z600 SGH-Z710 SGH-Z728 SGH-ZX10 Z248 i8910 Omnia HD 931SC BlackJack i637 fluxus GT-S7520U M6710 Beat DISC M7600 Beat DJ M8800 pixon M8910 Omnia Pro S5233 SGH-F480 SGH-G800 SGH-G810
NX8565LE929-CC中文资料
NEC's EA MODULATORINTEGRATED InGaAsP MQW DFBLASER DIODE MODULEFOR 2.5 Gb/s ULTRALONG-REACH 360, 600, 240 km DWDM APPLICATIONSNX8564LE NX8565LE NX8566LE SERIESFEATURES• INTEGRATED ELECTROABSORPTION MODULATOR • VERY LOW DISPERSION PENALTY:Over 360 km (6480 ps/nm), NX8564LE-BC/CC Over 600 km (10800 ps/nm), NX8565LE-BC/CCOver 240 km (4320 ps/nm), NX8566LE-BC/CC• LOW MODULATION VOLTAGE• AVAILABLE FOR DWDM WAVELENGTH BASED ON ITU-T RECOMMENDATION100 GHz grid, refer to ORDERING INFORMATIONNEC's NX8564/8565/8566LE Series is an Electro-Absorption (EA) modulator integrated, 1550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode. The module is capable of 2.5 Gb/s applications of over 360 km, 600 km, 240 km ultralong-reach and available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITU-T recommendations, enabling a wide range of applications.DESCRIPTIONCalifornia Eastern Laboratories元器件交易网元器件交易网NX8564/8565/8566LE SERIESPACKAGE DIMENSIONS (Units in mm, unless otherwise specified ±0.2mm)元器件交易网NX8564/8565/8566LE SERIES OPTICAL FIBER CHARACTERISTICSPARAMETER SPECIFICATION UNITMode Field Diameter9.3±0.5μmCladding Diameter125±1μmTight Buffer Diameter900±100μmCut-off Wavelength< 1270nmAttenuation 1525 to 1575 nm< 0.3dB/kmMinimum Fiber Bending Radius30mmFiber Length900 MIN.mmFlammability UL1581 VW-1NX8564/8565/8566LE SERIES Table A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set ) (1/2)NX856 LE -CC : SC-UPC connectorBC : FC-UPC connector (option)Without wavelength code : Wavelength is a certain point between 1528 to 1565 nm, 1579 to 1609 nm With wavelength code : Refer to Table A 4 : 360 km (6480 ps/nm)5 : 600 km (10800 ps/nm)6 : 240 km (4320 ps/nm)WavelengthCodeITU-T Wavelength *1(nm)Frequency (THz)Wavelength CodeITU-T Wavelength *1(nm)Frequency (THz)2871528.77196.104851548.51193.602951529.55196.004931549.31193.503031530.33195.905011550.11193.403111531.11195.805091550.91193.303181531.89195.705171551.72193.203261532.68195.605251552.52193.103341533.46195.505331553.32193.003421534.25195.405411554.13192.903501535.03195.305491554.94192.803581535.82195.205571555.74192.703661536.60195.105651556.55192.603731537.39195.005731557.36192.503811538.18194.905811558.17192.403891538.97194.805891558.98192.303971539.76194.705971559.79192.204051540.55194.606061560.60192.104131541.34194.506141561.41192.004211542.14194.406221562.23191.904291542.93194.306301563.04191.804371543.73194.207451574.54190.404451544.52194.107531575.36190.304531545.32194.007611576.19190.204611546.11193.907701577.02190.104691546.91193.807781577.85190.004771547.71193.707861578.68189.90*1 The value which omitted and computed the 3rd place below the decimal pointORDERING INFORMATIONPART NUMBER PACKAGING NX8564-AZ*Butterfly PackageNX8565-AZ*NX8566-AZ**NOTE:Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation.元器件交易网NX8564/8565/8566LE SERIES Table A: DWDM wavelength base on ITU-T recommendations(@ T LD = T set) (1/2)WavelengthCode ITU-T Wavelength *1(nm)Frequency(THz)WavelengthCodeITU-T Wavelength *1(nm)Frequency(THz)7951579.51189.809461594.64188.008031580.35189.709541595.48187.908111581.18189.609631596.33187.808201582.01189.509711597.18187.708281582.85189.409801598.04187.608361583.69189.309881598.89187.508451584.52189.209971599.74187.408531585.36189.1060061600.60187.308621586.20189.0060141601.45187.208701587.04188.9060231602.31187.108781587.88188.8060311603.16187.008871588.72188.7060401604.02186.908951589.56188.6060481604.88186.809041590.41188.5060571605.74186.709121591.25188.4060661606.60186.609211592.10188.3060741607.46186.509291592.94188.2060831608.32186.409371593.79188.10*1The value which omitted and computed the 3rd place below the decimal point元器件交易网元器件交易网NX8564/8565/8566LE SERIESABSOLUTE MAXIMUM RATINGSPARAMETER SYMBOL RATINGS UNIT Optical Output Power from Fiber P f10mWForward Current of LD I FLD150mAReverse Voltage of LD V RLD 2.0VForward Voltage of Modulator V FEA1VReverse Voltage of Modulator V REA5VForward Current of PD I FPD1mAReverse Voltage of PD V RPD10VCooler Current I C 1.5ACooler Voltage V C 2.5VOperating Case Temperature T C−20 to +70°CStorage Temperature T stg−40 to +85°CLead Soldering T emperature T sld260 (10 sec.)°C元器件交易网NX8564/8565/8566LE SERIES ELECTRO-OPTICAL CHARACTERISTICS (T LD = T set, T C = -20 to +70ºC, unless otherwise specified)PARAMETER SYMBOL CONDITIONS MIN.TYP.MAX.UNIT Laser Set Temperature T set*12035°COperating Current I op506080mAModulation Center Voltage V center Under modulation *2−1.5−1.2−0.5VModulation Voltage V mod Under modulation *223VForward Voltage of LD V FLD I FLD = I op 1.6 2.0VThreshold Current I th720mAOptical Output Power from Fiber P f I FLD = I op, Under modulation *2−5−2dBm(NX8564/65LE Series)I FLD = I op, Under modulation *201(NX8566LE Series)Peak Emission Wavelengthλp I FLD = I op, V EA = 0 V1528ITU-T *31565nm15741609 Side Mode Suppression Ratio SMSR I FLD = I op, V EA = 0 V30> 37dBExtinction Ratio ER I FLD = I op, Under modulation *210> 11dBRise Time t r I FLD = I op, 20-80%, Under modulation *270125psFall Time t f I FLD = I op, 80-20%, Under modulation *270125psDispersion Penalty DP I FLD = I op, Under modulation *2, 4< 1.5 2.0dBIsolation I s23dBRelative Intensity Noise RIN10 MHz to 10 GHz, V EA = 0 V, I FLD = I op< −135−130dB/Hz Input Return Loss S11I FLD = I op, V EA = −1 V, 50 Ω,−8dBf = 130 MHz to 2 GHzI FLD = I op, V EA = −1 V, 50 Ω,−5f = 2 to 2.5 GHz*1NX8564/65/66LE Series : T set is a certain point between 20 and 35°CNX8564/65/66LE××× Series : T set is set at a certain point between 20 and 35°C for ITU-T grid wavelength *2NX8564LE : C-band 360 km, L-band 288 km (6480 ps/nm) SMF under modulationNX8565LE : C-band 600 km, L-band 480 km (10800 ps/nm) SMF under modulationNX8566LE : C-band 240 km, L-band 192 km (4320 ps/nm) SMF under modulation2.48832 Gb/s, PRBS 223−1, V EA = V center± 1/2V mod, I FLD = I op, T LD = T set, NEC Test SystemV center: a certain point between −1.5 and −0.5 VV mod : a certain point 3 V or belowI op : a certain point between 50 and 80 mA*3Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid).Please refer to ORDERING INFORMATION.*4 BER = 10−10NX8564/8565/8566LE SERIESELECTRO-OPTICAL CHARACTERISTICS(Applicable to Monitor PD: T LD = T set , T C= -20 to +70ºC, unless otherwise specified)PARAMETERSYMBOLCONDITIONSMIN.TYP .MAX.UNIT Monitor Current I m V RPD = 5 V, I FLD = I op , V EA = 0 V 201001000μA Dark Current I D V RPD = 5 V, V EA = 0 V 10nA Terminal Capacitance C t V RPD = 5 V, f = 1 MHz 15pF Tracking Errorγ *1I m = const.0.5dB*1 Tracking Error: γ(mW)mset , T C = 25ºC , T C = -20 to +70ºCP P fγ = 10 log[dB]P f P opELECTRO-OPTICAL CHARACTERISTICS(Applicable to Thermistor and TEC: T C = -20 to +70ºC)PARAMETERSYMBOLCONDITIONSMIN.TYP .MAX.UNIT Thermistor Resistance R T LD = 25°C9.510.010.5k ΩB Constant B 335034503550K TEC Current I C T LD = T set 1.2A TEC VoltageV CT LD = T set 2.4V元器件交易网NX8564/8565/8566LE SERIES4.03.02.01.005010015005101520250123O p t i c a l O u t p u t P o w e r f r o m F i b e r P f (m W )Forward Current I F (mA)OPTICAL OUTPUT POWER FROM FIBER (CW) vs. FORWARD CURRENTEXTINCTION RATIO vs. MODULATOR VOLTAGEE x t i n c t i o n R a t i o E R (d B )Reverse Voltage of Modulator V REA (V) 2.01.51.00.5050100150FORWARD CURRENT vs.FORWARD VOLTAGEF o r w a r d C u r r e n t I F (m A )Forward Voltage V F (V)503020101235T h e r m i s t o r R e s i s t a n c e R (k Ω)Ambient Temperature T A (ºC)THERMISTOR RESISTANCE vs.AMBIENT TEMPERATURESPECTRUMR e l a t i v e I n t e n s i t y (d B )Wavelength λ (nm)-10-30-50-700-20-40-60ELECTRO-OPTICAL CHARACTERISTICS (T LD = T set , T C = 25ºC, unless otherwise specified)Remark The graphs indicate nominal characteristics.元器件交易网NX8564/8565/8566LE SERIESRemark The graphs indicate nominal characteristics.Life Support ApplicationsThese NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk andagree to fully indemnify CEL for all damages resulting from such improper use or sale.A Business Partner of NEC Compound Semiconductor Devices, Ltd.08/24/2004120 km120 km600 km STANDARD FIBER TRANSMISSION EXAMPLE (NX8565LE Series)10101010101010ERROR RATE CHARACTERISTICS B i t E r r o r R a t eReceived Power (dBm)101010EYE DIAGRAMAfter 600 km (100 ps/div.)R e l a t i v e I n t e n s i t y (20 m V /d i v .)R e l a t i v e I n t e n s i t y (10 m V /d i v .)元器件交易网4590 Patrick Henry Drive Santa Clara, CA 95054-1817Telephone: (408)919-2500Facsimile:(408) 988-0279Subject:Compliance with EU DirectivesCEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which areexempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.Restricted Substanceper RoHS Concentration Limit per RoHS (values are not yet fixed)Concentration containedin CEL devices -A-AZ Lead (Pb)< 1000 PPM Not Detected(*)Mercury < 1000 PPM Not Detected Cadmium< 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE< 1000 PPMNot DetectedIf you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substancecontent of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis.See CEL Terms and Conditions for additional clarification of warranties and liability.元器件交易网。
华邦(winbond)产品手册
PRODUCT GUIDE ==Winbond、ISSI 授权香港及中国代理== 8 位单片宽工作电压系列
型号 ROM 型式 ROM RAM I/O 脚 外扩存储 器空间 64K 工作电压 定时器/ 计数器 3 封装 Int 特殊功能 PDIP 6 CMOS 通用功能 特殊 I/O 口 /INT2, /INT3,WDT 特殊 I/O 口 /INT2, /INT3,WDT 16 KB 掩膜 ROM W78L54 掩膜 16K 256 32/36 64K 5.5V - 1.8V 3 8 特殊 I/O 口 /INT2,/INT3,WDT W78L801 掩膜 4K 256 36 64K 5.5V - 1.8V 2 12 特殊 I/O 口,P1 口 退出省电方式 WDT 可多次编程,特殊 I/O 口 / INT2, /INT3, WDT 可多次编程特殊 I/O 口 / INT2, /INT3, WDT 可多次编程特殊 I/O 口 / INT2, /INT3, WDT 可多次编程,可在线编程 特殊 I/O 口/ INT2, /INT3 可多次编程,可在线编程 W78LE516 Flash EPROM 64K 512 32/36 64K 5.5V - 2.4V 3 8 特殊 I/O 口,/ INT2, /INT3, 可多次编程,可在线编程 W78LE365 Flash EPROM 64K 1280 32/36 64 K 5.5V - 2.4V 3 8 特殊 I/O 口/ INT2, /INT3,WTD,PWM 特殊 I/O 口 W78LE812 Flash EPROM 8K 256 36 64K 5.5V - 2.4V 3 14 P1 口退出省电方式 WDT,UART 40 44 44 40 44 44 40 44 44 40 44 44 40 44 44 40 PLCC 44 PQFP 44
英格索兰猛虎空压机型号参数详解
解说英格索兰猛虎空压机型号_英格索兰猛虎空压机参数_英格索兰猛虎空压机特点英格索兰猛虎空压机型号有哪些？英格索兰猛虎螺杆空压机型号，英格索兰猛虎螺杆空压机参数大全。
英格索兰猛虎螺杆空压机是英格索兰一款高稳定性的螺杆空压机，猛虎螺杆空压机各种独特的设计，使您能够安全省心的使用。
英格索兰猛虎螺杆空压机一体化的冷却模块、先进的控制模块、高效的油过滤和分离模块保证空压机使用过程的中稳定性、可靠性。
对于猛虎螺杆空压机可以说是革命性的技术造就了猛虎空压机的最佳的性能。
99空压机网从英格索兰代理了解到关于英格索兰猛虎螺杆空压机最新、最全面的详细信息其中包括了猛虎空压机型号、参数以及各个组成模块的特点，帮助您在对英格索兰猛虎螺杆空压机选购前有所了解。
英格索兰猛虎螺杆空压机型号与参数空压机型号（）英格索兰猛虎螺杆空压机主机各模块详细介绍英格索兰猛虎螺杆空压机主机驱动模块：英格索兰猛虎空压机进气端采用滚柱轴承，受力均匀，稳定性高;排气端采用一对背靠背滚锥轴承，同时抵消径向力和轴向力;猛虎空压机这一设计独特的储油槽，大大降低了干摩擦时间，延长了英格索兰猛虎空压机使用寿命。
英格索兰猛虎螺杆空压机冷却模块：英格索兰猛虎空压机采用体式冷却模块，专利设计的冷却风扇配合特别设计的导风罩提高了猛虎空压机机组的运行效率。
英格索兰猛虎螺杆空压机控制模块：英格索兰猛虎空压机特有的冷室和热室结构设计，将独立的控制模块置于冷室中，避免了英格索兰猛虎空压机因高温导致电气元件过早老化，紧凑的设计更加节省猛虎空压机机组空间。
英格索兰猛虎螺杆空压机油过滤和分离模块：英格索兰猛虎空压机集成了管道和传感器，比其同类空压机产品减少15%的连接点，大大降低了泄漏的发生率，格索兰猛虎空压机独特的油分离模块设计，大大降低了空气含油量，能达到3ppm以下的行业领先水平，猛虎空压机所有的管路连接都采用O型圈密封，从根本上提高了英格索兰猛虎空压机防泄漏等级。
英格索兰猛虎螺杆空压机精密的传动系统：●英格索兰猛虎螺杆空压机5.5-37kV机组采用单根Poly-V宽皮带进行传动，相比多根细皮带传动，应力更分散，稳定性更高;●英格索兰猛虎螺杆空压机45-160kW机组采用高精度的齿轮传动。
847T 2英寸直径实体纵差编码器选购指南说明书
Installation Instructions847T 2 in. Diameter Solid Shaft Incremental EncodersSelection GuideaCode Encoder Diameter/TypeT2 in. diameter, solid shaftbCode Mounting ConfigurationD Standard square flange H Standard servo mount P5 PY mounting**P can be ordered only with option Y from table ccCode Shaft SizeK 6 mm diameter shaft with flat L 10 mm diameter shaft with flat M 1/4 in. diameter shaft with flat N 3/8 in. diameter shaft with flatY5/8 in. diameter extended shaft with flat****Y can be ordered only with option P from table bdCode Power Supply1 4.5…5.5V DC 28…30V DCeCodeOutput ConfigurationSignal Phasing A-leads-B, Z gated A4 4.5…5.5V line driver outputs5 4.5…5.5V open collector outputs ◆68…30V line driver outputs 78…30V open collector outputsSignal Phasing B-leads-A, Z gated BNA 4.5…5.5V line driver outputsB 4.5…5.5V open collector outputs ◆C 8…30V line driver outputs D8…30V open collector outputs◆ Options 5 and B cannot be ordered with option 2 from table d. Options 6, 7, C and D cannot be ordered with option 1 from table d.847 T - P-01204Y 14R C a b c e d f g hAccessoriesSpecificationsfCode Connector/Cable ExitRRadial exitgCode Connector/Cable TypeA M12 connector, 8-pin with mating connectorB M12 connector, 8-pinC MS connector, 6-pin with mating connectorD MS connector, 6-pinE MS connector, 7-pin with mating connector FMS connector, 7-pinG MS connector, 10-pin with mating connector H MS connector, 10-pinP Cable with 1.5 m (4.92 ft) length Q Cable with 5 m (16.4 ft) length RCable with 10 m (32.8 ft) lengthhCode:Resolution00001 (65536)00001…65536 pulses/revolutionDescriptionPart NumberHigh-performance flexible coupling ◆845-FC-*-*Measuring wheels ◆845-MW-A-*Mounting plates ◆845-MB-*Servo clamps ◆845-SC Pre-wired cables 845-CA-*-*Mating connectors845-6P845-7P 845-7P-RT 845-10P 845-10P-RT Differential encoder buffer board 845-BB*M12 cable889D-F8FB-*◆Not available for PY mounting* See /Motion-Control/High-Resolution-Incremental-Optical-Encoder for selection.Electrical Code formatIncremental, 2 channels with zero indexSignal options, clockwise rotation viewed from shaft end A-leads-B, 180° marker gated with A, or B-leads-A, 180° marker gated with BNIMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.Electrical (continued)Signal phase relation90° ± 22° channelsSymmetry50% ± 10%Zero index channel Gated 1/2 cycleSupply current50 mAFrequency response 4.5…5.5V line driver output: 820 kHz8…30V line driver output: 820 kHzOpen collector: 150 kHzResolution1…65536 pulses/revolutionLoad current30 mA for all output typesOutput drivers 4.5…5.5V line driver - IC HD28…30V line driver - IC HD2Open collector - 7406Electrical protection Reverse polarity and short circuit for alloutput typesCable outer diameter0.25 in (6.2 mm)Cable type300V, 105 °C, 26 AWG, 9-conductor withoverall braided shield, UL AWM type20327 for use in fixed (non-flexing)installations; RoHs compliantCable bend radius Minimum 5x outer diameter MechanicalMaximum operating speed9000 RPMAngular acceleration500,000 radians/s²Moment of inertia15 g•cm²Startup torque at 20 °C (68 °F)0.8 N•cmOperating torque at 20 °C (68 °F)0.6 N•cmApproximate weight [kg (lb)]0.22 (0.50) square flange mountingwith M12 connector0.34 (0.75) PY mounting with M12connector Mechanical (continued)MTTFd (EN ISO 13849-1)330 yearsShaft loading80 N radial, 20 mm (0.79 in.) from frontbearing and 40 N axial provide L10 lifeof 3.6 x109 revolutions at 9,000 RPMand 80 °C ambient temperature Shaft diameter [mm (in.)] 6 (0.24), 10 (0.39), 6.4 (0.25), and9.2 (0.38) diameter for solid shaftencoders7.94 (0.313) for encoder with PYmountingEnvironmentalEnclosure type rating Shaft: IP65Housing, connector version withmating connector installed: IP67Housing, cable version: IP67 Temperature-30…+80 °C (-22…+176 °F) operating-40…+100 °C (-4…+212 °F) storage Relative humidity90% noncondensingShock100 G/11 ms durationVibration30 G/10…2000 HzEMC EN 61000-6-2 and EN 61000-6-3(M12 connector)Housing material EN AC-47100 die-cast aluminum Housing finish Powder coat paint, color RAL 9005,Pantone black C (jet black)Flange material6061-T6 aluminumShaft material SAE 303 stainless steel Certifications RoHS compliantCEMarked for all applicable directives,UL listed only with cable or M12connectionsFor use in NFPA 79 applications onlyOutput WaveformsComplementary signals AN, BN, and ZN are supplied only on units with line driver outputs.Clockwise rotation when facing encoder shaftSignals and marker option - A leads B (CW rotation)Signals and marker option - B leads A (CW rotation)Clockwise rotation when facing encoder shaftConnector Pins and Signal AvailabilityApproximate Dimensions [mm (in.)]Approximate Dimensions [mm (in.)] (continued)Rockwell Automation maintains current product environmental information on its website at/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.。
Proservo NMS8x 产品安全说明书
Products Solutions Services XA01495G/08/EN/01.1671325066Safety InstructionsProservoNMS80, NMS81, NMS83ATEX: II 1/2G Ex d[ia] IIC T6...T1 Ga/GbIECEx: Ex db[ia Ga] IIC T6...T1 Ga/GbSafety instructions for electrical apparatus for Explosion-hazardous AreasCopy of EC Declaration of ConformityProservo NMS8x XA01495G3ProservoNMS80, NMS81, NMS83Table of ContentsAssociated documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Supplementary documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Manufacturer's certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Other standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Extended order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Safety instructions: General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Safety instructions: Special conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Safety instructions: Special installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Safety instructions: Zone 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Connection data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12XA01495GProservo NMS8x4Associated documentationThis document is an integral part of the following Operating Instructions:NMS80•BA01456G/00NMS81•BA01459G/00NMS83•BA01462G/00Supplementary documentationExplosion-protection brochure:CP00021Z/11The Explosion-protection brochure is available:•In the download area of the Endress+Hauser website: → Download → Advanced → Documentation Code: CP00021Z •On the CD for devices with CD-based documentationManufacturer's certifi-catesEC/EU Declaration of Conformity → 2EC/EU type-examination certificate Certificate number:FM 16 ATEX 0001XIEC Declaration of ConformityCertificate number:IECEx FMG 16.0001XAffixing the certificate number certifies conformity with the following standards (depending on the device version).•IEC 60079-0 : 2011•IEC 60079-1: 2014•IEC 60079-11 : 2011•IEC 60079-26:2014•IEC 60529:2013Other standards Among other things, the following standards shall be observed for proper installation:•IEC/EN 60079-14 : 2013: "Explosive atmospheres - Part 14: Electrical installations design, selection and erection"•EN 1127-1 : 2011: "Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology"Extended order codeThe extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is clearly visible. Additional information about the nameplate is provided in the associated Oper-ating Instructions.Proservo NMS8x XA01495G5Structure of the extended order codeBasic specificationsThe features that are absolutely essential for the device (mandatory features) are specified in the basic specifications. The number of positions depends on the number of features available. The selected option of a feature can consist of several positions.Optional specificationsThe optional specifications describe additional features for the device (optional features). The number of positions depends on the number of features available.The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists of a number or a letter (e.g. J = test, certificate). The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate).More detailed information about the device is provided in the following tables. These tables describe the individual positions and IDs in the extended order code which are relevant to hazardous locations.Extended order code of the ProservoDevice type NMS8xBasic specificationsNMS8x -*************+A*B*C*D*E*F*G*..------------------------------------------------------------------Device type Basic specifica-tions Optional specifica-tions* =PlaceholderAt this position, an option (number or letter) selected from the specification is displayed instead of the placeholders.PositionSelected option Description1, 2Approval NMS8x BC ATEX II 1/2G Ex d[ia Ga] IIC T6…T1 Ga/Gb IC IEC Ex db[ia Ga] IIC T6...T1 Ga/Gb 5, 6Primary OutputNMS8xA1Modbus RS485B1V1E14-20mA HART Ex d H14-20mA HART Ex i7, 8Secondary I/OAnalogueNMS8xA1Ex d, 1x 4-20 mA HART, 1x RTD input A2Ex d, 2x 4-20 mA HART, 2x RTD input B1Ex i, 1x 4-20 mA HART, 1x RTD input B2Ex i, 2x 4-20 mA HART, 2x RTD input C21x Ex i 4-20 mA HART, 2x RTD input + 1x Ex d 4-20 mA HARTX0Prepared for I/O analogue, RTD input 9, 10Secondary I/O Digital Ex dNMS8xA12x relay + 2x module discrete A24x relay + 4x module discrete A36x relay + 6x module discrete B1Modbus RS485B2Modbus RS485 + 2x relay + 2x module discrete B3Modbus RS485 + 4x relay + 4x module discrete X0Prepared for I/O digital, Ex dXA01495G Proservo NMS8x6Optional specifications13ProcessPressureNMS8010… 0.2bar/20kPa/2.9psi20… 6bar/600kPa/87psiNMS8110… 0.2bar/20kPa/2.9psi20… 6bar/600kPa/87psi30… 25bar/2.5MPa/362psiNMS8320… 6bar/600kPa/87psi17,18,19Displacermaterial: TypeNMS801AA316L; 30mm CylindricalNMS811AC316L; 50mm Cylindrical1BE316L; 70mm Conical1BJ316L; 110mm Conical2AA PTFE; 30mm Cylindrical2AC PTFE; 50mm Cylindrical3AC Alloy-C; 50mm CylindricalNMS834AC316L polished; 50mm Cylindrical4AE316L polished; 70mm Conical20,21ProcessSealingNMS8x A1HNBR -30...150 °C/-22...302 °FB1FKM GLT, -40...200 °C/-40...392 °FB2FFKM, -20...200 °C/-4…392 °FC1CR Chloroprene -30 ... +80 °C/-22…176 °FD1PTFE (wire drum FKM) -100…150 °C/-148…302 °FE1VMQ Silicone -40...200 °C/-40…392 °FID Selected option DescriptionPx AccessoryEnclosedNMS8x PA Weather protection coverRA Relief valve, Rc3/8RB Purge nozzle connection, Rc3/8RC Pressure gauge, Rc3/8RD Rc3/8 cleaning nozzleRG Guide wire assemblyPosition Selected option DescriptionProservo NMS8x XA01495G7Safety instructions:General•Staff must meet the following conditions for mounting, electrical installation, commissioning and maintenance of the device:–Be suitably qualified for their role and the tasks they perform –Be trained in explosion protection –Be familiar with national regulations •Install the device according to the manufacturer's instructions and national regulations.•Do not operate the device outside the specified electrical, thermal and mechanical parameters.•Only use the device in media to which the wetted materials have sufficient durability.•Avoid electrostatic charging:–Of plastic surfaces (e.g. housing, sensor element, special varnishing, attached additional plates)–Of isolated capacities (e.g. isolated metallic plates)•Refer to the temperature tables for the relationship between the permitted process temperature and ambient temperature for the sensor and/or transmitter, depending on the range of application, and the temperature class.•Modifications to the device can affect the explosion protection and must be carried out by staff authorized to perform such work by Endress+Hauser.Safety instructions:Special conditionsPermitted ambient temperature range at the electronics housing: –40 °C ≤ T a ≤ +60, +70 or +80 °C.Observe the information in the temperature table on page 9.•Use supply wires suitable for 20 K above the ambient temperature.•In the event of additional or alternative special varnishing on the housing or other metal parts:–Observe the danger of electrostatic charging and discharge. –Do not rub surfaces with a dry cloth.Special conditions of use - ATEX/IECEx•Flamepath joints are not for repair. Contact the manufacturer.•Use heat resisting cables rated ≥ 85 °C for Ta > 50 °C.•Precautions shall be taken to minimize the risk from electrostatic discharge of non-metallic labels and isolated metal tags applied to the enclosure.•To maintain the ingress protection ratings (IP66/68), teflon tape or pipe dope is required for blank-ing plugs.•Ex d certified seals are required within 50 mm (2") on all used housing entries.XA01495GProservo NMS8x8Safety installation: Special installationå 1A Zone 11Tank; Zone 0, Zone 12Connection and electronics compartment Ex d 3Power supply4Potential equalization line 5Potential equalization•Install the device to exclude any mechanical damage or friction during the application. Pay particular attention to flow conditions and tank fittings.•Continuous service temperature of the connecting cable: –40 to ≥ +xx °C; in accordance with the range of service temperature taking into account additional influences of the process conditions (Ta,min), (Ta,max +30 K). (→ 9, "Ambient temperature").•In potentially explosive atmospheres:–Do not disconnect the electrical connection of the power supply circuit when energized.–Do not open the connection compartment cover.•Only use certified cable entries suitable for the application. Observe national regulations and standards. Accordingly, the connection terminal does not include any ignition sources.•When operating the transmitter housing at an ambient temperature under –20 °C, use appropriate cables and cable entries permitted for this application.•When connecting through a conduit entry approved for this purpose, mount the associated sealing unit directly at the housing.•Seal unused entry glands with approved sealing plugs that correspond to the type of protection. The plastic transport sealing plug does not meet this requirement and must therefore be replaced during installation.•Before operation:–Screw in the cover all the way.–Tighten the securing clamp on the cover.•The installation of the tank gauge NMS80/81/83 is to be made in such a way that no waving or rolling motion of the displacer can occur in operation causing a contact of the displacer with the tank wall. In case of the drum housing made of aluminum (NMS80), any impact or friction to the equipment has to be avoided in order to prevent an ignition hazard between the drum housing and internal parts.Proservo NMS8x XA01495G9Separation of Zone 0 and Zone1The partition wall between the drum compartment (Zone 0) and electronic compartment (Zone 1) meets requirement 4.2.5.3 i) of IEC 60079-26.Maximum working pressure of the drum compartment is below.Potential equalizationIntegrate the device into the local potential equalization.Overvoltage protectionOvervoltage protection against atmospheric over voltages.•The following Terminal outputs / configurations need no separate external overvoltage protection measures:•Device configuration:–Basic specification, Position 5, 6 (Primary output) = A1, B1, E1, H1–Basic specification, Position 7, 8 (Secondary I/O Analogue) = A1, A2, B1, B2, C2, X0–Basic specification, Position 9, 10 (Secondary I/O Digital Ex d) = B1•All other configurations must be protected by separate additional measures to comply national regulations and standards.•Observe the safety instructions of used overvoltage protection.Ambient temperatureDevice typeMaximum working pressure (MWP)NMS80-************1…0.02 MPa (0.2 bar)NMS80-************2…0.6 MPa (6 bar)NMS81-************1…0.02 MPa (0.2 bar)NMS81-************2…0.6 MPa (6 bar)NMS81-************3… 2.5 MPa (25 bar)NMS83-************2…0.6 MPa (6 bar)Position TerminalPower supply G HART interface E external DisplayFTemperature classAmbient temperatureProcess temperature (Temperature of displacer)T1-40°C ≤Ta ≤+80°C -253°C ≤Tpro ≤+450°C T2-253°C ≤Tpro ≤+300°C T3-253°C ≤Tpro ≤+200°C T4-253°C ≤Tpro ≤+135°C T5-40°C ≤Ta ≤+70°C -253°C ≤Tpro ≤+100°C T6-40°C ≤Ta ≤+60°C -253°C ≤Tpro ≤+85°CXA01495G Proservo NMS8x10Measure low or hight temperature liquid•The process temperature shall not bring the enclosure of the electronics compartment beyond the specified ambient temperature range limits.•When installing high or low temperature storage tank, heat or cold from the liquid, the vapor or tank wall should not be conducted to the NMS8x directly.• Cover the tank with a thermal isolation material and/or install an ambient temperature adjustment pipe between NMS8x and nozzle of the tank.å 21Ambient temperature adjust pipe (optional)2Terminal isolation material3Measuri≤ng wire4Displacer5Tank wall6High or low temperature liquidThe temperature of the flange and the internal temperature of the drum compartment:-40°C ≤ Ta ≤ +60°C, +70°C or +80°C (see table above.)Applicable maximum installation heightAlthough IEC60079 series does not require contents of this section, the following is recommended to increase the safety when using this equipment.In the unlikely case that the displacer wire breaks and the displacer hits the tank bottom there is the possibility of an ignition if the potential energy stored in the displacer is greater than the minimum ignition energy. In order to avoid any ignition hazard the applicable maximum tank height (Hmax) which is depending on displacer weight (Wd) shall be as follows:Ex groupDisplacer weight252 g (Standard)270 g (Standard: Maximum)300 g (Weight and Measure) IIA50.5 m47.1 m42.4 mIIB50.5 m47.1 m42.4 mIIC24.2 m22.6 m20.3 mProservo NMS8xXA01495G 11EN 13463-1:2009 clause 6.4.2.2.2 requirement of single impact energy limits for category 1G:Calculation formula: Hmax = E / (Wd * 9.81)In case of a tank gauge installation above the maximum height (Hmax), when the tank is empty and explosive gas/vapor is present, the displacer must be lowered to the tank bottom to avoid any ignition hazard between the displacer and the tank bottom.Safety installation: Zone 0•In the event of potentially explosive vapor/air mixtures, only operate the device under atmospheric conditions.–Temperature: 20 to +60 °C–Pressure: 80 to 110 kPa (0.8 to 1.1 bar)–Air with normal oxygen content, usually 21% (V/V)• If no potentially explosive mixtures are present, or if additional protective measures have been taken, the device may also be operated under non-atmospheric conditions in accordance with the manufacturer's specifications.Gas group Impact energy limit (E)IIA 125 Nm IIB 125 Nm IIC 60 Nm CAUTIONXA01495G Proservo NMS8xConnection data Basic specification, Position 1, 2 (Approval) = BC, ICConnection compartment Ex då 31Connection for external display Ex i12Proservo NMS8xXA01495G 13TRC[01], type power supplyTRC[10], type main boardTRC[32], type "Modbus" module; optional TRC[33], type "V1" module; optional Terminal GCDI G1:LG2:not connectedG3:N plug connected DesignationPower / Mains Local LCD, CDI (internal)non-Ex U N = 85...264V AC,50/60Hz P N = 28.8 VA U N = 3.3 V DC P N = 41 mW Terminal EF E1:H+E2:H-F1:Vcc F2:A F3:B F4:gndDesignation4-20mA HART Remote display Ex [ia]U o = 29 VI o = 110 mA P o = 700 mWC o = 65 nFL o = 2.9 mHU o = 3.9 V I o = 500 mA P o = 230 mW C o = 99 μF L o = 140 μH non-ExU N = 24V DCP N ≤ 426 mW U N = 3.3 V DCP N = 41 mW Terminal Slot A through slot D1:S Cable shielding; capacitive connected to earth 2:0V Common reference 3:B–Non-inverting signal line 4:A+Inverting signal line DesignationModbus-Slave FOUNDATION Fieldbus non-Ex U N = 12V DCP N ≤ 12 mWU M = 250 VCurrently not supported Terminal Slot A through slot D1:S Cable shielding; capacitive connected to earth 2:not connected 3:B–Signal –4:A+Signal +DesignationV1-Slave WM550non-Ex U N = 24V DCP N ≤ 414 mWU M = 250 VCurrently not supportedXA01495G Proservo NMS8x14TRC[20], type "Analog module" (Ex i); 4-20 mA HART; optionalTRC[21], type "Analog module" (Ex d); 4-20 mA HART; optionalTerminal Slot B or slot COperation mode:• 4...20 mA outputor HART slave +4...20 mA output or• 4...20 mA input or•HART master+4...20 mA input or•HART master4-wire RTD connection:Terminal 5 through 83-wire RTD connection:Terminal 5, 6 and 82-wire RTD connection:Terminal 5 and 8Terminal active use:2:H-3:H+Terminal passive use:1:H-2:H+Designation24V + RTD 4-20 mA HARTEx [ia]Terminals 4-5 (24V):U o = 29 VI o = 108 mAP o = 776 mWC o = 63 nFL o = 3.0 mHTerminals 2-3 (Active):U o = 29 VI o = 106 mAP o = 760 mWC o = 63 nFL o = 3.1 mHTerminals 5-8 (RTD):U o = 29 VI o = 36 mAP o = 263 mWC o = 64 nFL o = 26 mHTerminals 1-2 (Passive):Ui = 29 VIi = 106 mAPi = 760 mWC i = 11 nFLi = 0non-Ex Terminals 4-5 (24V):U N = 24V DCP N≤ 600 mWTerminals 2-3 (Active):U N = 24V DCP N≤ 540 mWTerminals 5-8 (RTD):I N = 400μA DCP N≤ 160 μWTerminals 1-2 (Passive):U N = 29V DCP N≤ 653 mWTerminal Slot B or slot COperation mode:• 4...20 mA outputor HART slave +4...20 mA output or• 4...20 mA inputor•HART master+4...20 mA input or•HART master4-wire RTD connection:Terminal 5 through 83-wire RTD connection:Terminal 5, 6 and 82-wire RTD connection:Terminal 5 and 8Terminal active use:2:H-3:H+Terminal passive use:1:H-2:H+Designation24V + RTD 4-20 mA HARTnon-Ex Terminals 4-5 (24V):not usedTerminals 2-3 (Active):U N = 24V DCP N≤ 540 mWU M = 250 VTerminals 5-8 (RTD):I N = 400μA DCP N≤ 160 μWU M = 250 VTerminals 1-2 (Passive):U N = 29V DCP N≤ 653 mWU M = 250 VProservo NMS8xXA01495G 15TRC[31], type Digital; optional DesignationSlot A through slot D Operation mode:•disabled•passive output•passive input•active input Installed in slot A:1:A1-12:A1-2 3:A2-14:A2-2Installed in slot B:1:B1-12:B1-23:B2-14:B2-2Installed in slot C:1:C1-12:C1-23:C2-14:C2-2Installed in slot D:1:D1-12:D1-23:D2-14:D2-2DesignationRelay / Digital Input/Output 1 Relay / Digital Input/Output 2non-Ex Relay:U N = 250V AC/DC I N ≤ 2 ARelay:U N = 250V AC/DC I N ≤ 2 A Digital Input:U N = 5...230 V AC/DCU M = 250 V Digital Input:U N = 5...230 V AC/DCU M = 250 VXA01495G Proservo NMS8x16Attachment: Nameplate view㻵㻼㻢㻤㻌㻛㻌㻢㻢䇾㻙䇾。
SN75107BD 数据手册说明书
SN75107AJ SN75107BJ SN75108AJ SN75108BD SN75108BJ SN75108BN SN75109AJ
SN75109J
SN75109N
SN7510FA SN7510FA SN7510FA SN7510FA SN7510L SN7510L SN7510L SN7510P SN7510P SN7510P SN7511FA
N/A
IC Datasheets -
/SN7510L-datasheet.html
Shortform
Texas Instruments
Differential Video Amplifier
/SN7510L-datasheet.html
Advanced Micro Devices
Differential DriverTransmitter - ConstantCurrent Output
/SN75109N-datasheet.html
Texas Instruments
General Purpose Video Amplifier
Shortform
Texas Instruments
Differential Video Amplifier
/SN7510P-datasheet.html
Texas Instruments
General Purpose Video Amplifier
Differential Video Amplifier
/SN7510FA-datasheet.html
Texas Instruments
General Purpose Video Amplifier
断路器行程开关
行程开关DXZ系列-2
行程开关JW2系列-1
JW2系列行程开关适用于交流50Hz，电压至380V直流220V
的控制电路中作控制运动机构的行程或变换其运动方向或速度之用。
行程开关JW2系列-2
行程开关X2 / X2-N系列-1
X2、X2－N系列行程开关适用于交流50电压至380V的电路中
作行程控制和限位之用。
行程开关LX4系列-2
LX4-11、12型行程开关： 适用于惰性行程不甚大的平移机构 LX4-21、22型行程开关： 适用于惰性行程较大的平移机构 LX4-31、32型行程开关： 适用于提升机构 LX4-41、42型行程开关： 适用于需要三个操作位置的平移机构 LX4-62型行程开关： 适用于速度较大的平移机构 LX4-12S型行程开关： 适用于需防水场合的惰性行程不甚大的
LX10系列行程开关适用于起重机交流50Hz电压380V，直流220V
的控制线路中作为机构行程的终点保护之用。
行程开关LX10系列-2
行程开关LX12-2系列
LX12－2系列行程开关适用于交流50Hz，电压至500～220V，
电流2～4A的控制电路中，用以控制运动机构的行程之用。
行程开关LX19系列-1
光电开关E系列-2
光电开关E系列-3
● 红外线光光电开关是利用被检测物体对红外光束的遮光或反射，由同 步回路、选通而检测物体的有无，基检测物体不限于金属，对非金属所 有物体均可检测。
● 红外线光电开关可分为扩散反射型、反馈反射型、透过型。产品具有 体积小、精度高、检测距离远，具有防水、防腐蚀、防震动、抗光、电 磁等干扰。大量应用在烟草纺织、机械、钢铁、造纸等各种行业，可直 接替代自动化流水线上配套使用，并能代替国外同类进口产品。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
LASER DIODENX8571 Series1 550 nm CW LIGHT SOURCEInGaAsP MQW-DFB LASER DIODE MODULEWITH WAVELENGTH MONITORDESCRIPTIONThe NX8571 Series is a 1 550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode module with wavelength monitor function. This device is temperature tunable over 4 × 50 GHz channels. Available at both C-band (1530.334 to 1565.087 nm) and L-band (1565.496 to 1608.760 nm) ITU-T grid wavelengths.This device is designed as CW light source and ideal for transmission systems in which external modulators are used.FEATURES• Wavelength monitor function (Etalon Filter, Wavelength monitor PD) • Optical output power: P f = 10 mW MIN.• Available for DWDM wavelengths based on ITU-T recommendations (50 GHz grid)• 4-channel wavelength tunable capability for 50 GHz-spacing (NX8571S ××××D)• Internal thermo-electric cooler and isolator • Hermetically sealed 14-pin butterfly package • Polarization maintain fiber pigtailDocument No. PL10136EJ03V0DS (3rd edition) Date Published June 2004 CP (K)© NEC Compound Semiconductor Devices, Ltd. 2002, 2004The mark shows major revised points.PACKAGE DIMENSIONS (UNIT: mm)OPTICAL FIBER CHARACTERISTICSParameter Specification UnitOuter Diameter0.9±0.1 mm Minimum Fiber Bending Radius 25 mm Fiber Length1 000 MIN.mmData Sheet PL10136EJ03V0DS2ABSOLUTE MAXIMUM RATINGSRatings UnitParameter SymbolForward Current of LD I F 300 mAReverse Voltage of LD V R 2.0 VForward Current of PD I F 10 mAReverse Voltage of PD V R 20 VOperating Case Temperature T C−20 to +70 °CStorage Temperature T stg−40 to +85 °CLead Soldering Temperature T sld260 (10 sec.) °CELECTRO-OPTICAL CHARACTERISTICS (T LD = T set, T C = −5 to +70°C, unless otherwise specified)MAX.UnitTYP.Parameter Symbol Conditions MIN.channel 20 35 °CLaser Set Temperature T set Single4 channel tunable 10 45Forward Voltage V F P f = 10 mW 0.9 1.2 2.5 VThreshold Current I th20 40 mAOperation Current I op P f = 10 mW 70 125 mAOptical Output Power from Fiber P f I F = 125 mA, T LD = T set 10 mWITU-T *1 1 609 nm530Peak Emission Wavelength λp P f = 10 mW, CW, T LD = T set 1−20 +20 pm Wevelength Stability −T LD = T set, applicable to wavelengthmonitor, E.O.LSpectral Line Width ∆νP f = 10 mW, CW, 3 dB down 1 2 MHzSide Mode Suppression Ratio SMSR P f = 10 mW, CW 35 45 dBRelative Intensity Noise RIN P f = 10 mW, 20 MHz to 3 GHz −150 dB/HzOptical Isolation I s P f = 10 mW, CW 30 dBPolarization Extinction Ratio *2ext P f = 10 mW, CW 20 dB*1Available for DWDM wavelengths based on ITU-T recommendations (50 GHz grid).Please refer to Table A.*2 Polarization state of LD is aligned parallel to the slow axis.Data Sheet PL10136EJ03V0DS 3ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: T LD = T set , T C = −5 to +70°C)Parameter Symbol Conditions MIN. TYP. MAX. UnitMonitor Current (P f Monitor) I m (P f ) P f = 10 mW, V R = 5 V20 200 µA Monitor Current (λp Monitor) I m (λp ) P f = 10 mW, V R = 5 V, Locking point 10100µAOperation Region *1I m (λ)25 75%⏐λ1−λ2⏐ 90pm Discrimination Slope *1ηλ0.05µA/pm Dark Current I D V R = 5 V 2 10 nA Tracking Errorγ*2I m = const.0.5dB*1 Operation region, Discrimination slope, Slope assignmentI I m I m (λp I m I 1: I m I 2: I m Negative Slope (Odd channel)I m (λ)I m I m (λp I m I 2: I m I 1: I m λPositive Slope (Even channel)µ*2 Tracking Error: γmmset, T C = –5 to +70˚C10P fγ = 10 log[dB]P f 10ELECTRO-OPTICAL CHARACTERISTICS(Applicable to Thermistor and TEC: T LD = T set , T C = −5 to +70°C)Parameter Symbol Conditions MIN. TYP. MAX. UnitThermistor Resistance R T LD = 25°C 9.5 10.0 10.5 k Ω B Constant B T LD = 25°C3 350 3 450 3 550 K Cooler Current I C ∆T = 70 − T set , P f = 10 mW 1.5 A Cooler VoltageV C∆T = 70 − T set , P f = 10 mW3.0VData Sheet PL10136EJ03V0DS4ORDERING INFORMATIONNX8571SC -BAWith FC-PC connector Without : Single channel D : 4 channel tunable Wavelength code : Refer to Table A Package codeTable A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set ) (1/7)Wavelength CodeITU-T Wavelength*1Frequency Monitor Slope 4 channel tunablesingle channel (nm)(THz)315D 303 1530.33 195.90 Negative 307 1530.72 195.85 Positive 311 1531.11 195.80 Negative 315 1531.50 195.75 Positive 330D 318 1531.89 195.70 Negative 322 1532.29 195.65 Positive 326 1532.68 195.60 Negative 330 1533.07 195.55 Positive 346D 334 1533.46 195.50 Negative 338 1533.85 195.45 Positive 342 1534.25 195.40 Negative 346 1534.64 195.35 Positive 362D 350 1535.03 195.30 Negative 354 1535.42 195.25 Positive 358 1535.82 195.20 Negative 362 1536.21 195.15 Positive 377D 366 1536.60 195.10 Negative 370 1537.00 195.05 Positive 373 1537.39 195.00 Negative 377 1537.79 194.95 Positive 393D 381 1538.18 194.90 Negative 385 1538.58 194.85 Positive 389 1538.97 194.80 Negative 393 1539.37 194.75 Positive*1 The value which omitted and computed the 3rd place below the decimal pointData Sheet PL10136EJ03V0DS5Table A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (2/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)Negative194.70 409D 397 1539.76Positive194.65 4011540.16Negative194.601540.55405Positive194.551540.95409Negative194.50 425D 413 1541.34Positive194.451541.74417194.40Negative1542.14421Positive194.351542.53425Negative 441D 429 1542.93194.30Positive194.251543.33433194.20Negative1543.73437Positive194.151544.12441194.10Negative 457D 445 1544.52194.05Positive1544.92449194.00Negative1545.32453Positive193.951545.72457Negative193.90 473D 461 1546.11Positive193.851546.51465Negative193.801546.91469193.75Positive1547.31473Negative 489D 477 1547.71193.70193.65Positive1548.11481193.60Negative1548.51485193.55Positive1548.91489Negative 505D 493 1549.31193.50Positive193.45 4971549.71Negative193.401550.11501Positive193.351550.51505193.30Negative 521D 509 1550.91Positive193.251551.31513Negative193.201551.72517Positive193.15 5211552.12*1The value which omitted and computed the 3rd place below the decimal point6Data Sheet PL10136EJ03V0DSTable A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (3/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)Negative193.10 537D 525 1552.52Positive193.05 5291552.92Negative193.001553.32533Positive192.951553.73537Negative192.90 553D 541 1554.13Positive192.851554.53545192.80Negative1554.94549Positive192.751555.34553Negative 569D 557 1555.74192.70Positive192.651556.15561192.60Negative1556.55565Positive192.551556.95569192.50Negative 585D 573 1557.36192.45Positive1557.76577192.40Negative1558.17581Positive192.351558.57585Negative 602D 589 1558.98192.30Positive192.25 5931559.38Negative192.201559.79597Positive192.151560.20602Negative192.10 618D 606 1560.60Positive192.05 6101561.01Negative192.001561.41614191.95Positive1561.82618Negative191.90 634D 622 1562.23Positive191.851562.64626Negative191.801563.04630191.75Positive1563.45634Negative191.70 650D 638 1563.86Positive191.65 6421564.27Negative191.60 6461564.67Positive191.551565.08650*1The value which omitted and computed the 3rd place below the decimal pointData Sheet PL10136EJ03V0DS 7Table A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (4/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)Negative191.50 667D 654 1565.49Positive191.45 6591565.90Negative191.401566.31663Positive191.351566.72667Negative191.30 683D 671 1567.13Positive191.251567.54675191.20Negative1567.95679Positive191.151568.36683Negative 700D 687 1568.77191.10Positive191.051569.18691191.00Negative1569.59695Positive190.951570.00700190.90Negative 716D 704 1570.41190.85Positive1570.82708190.80Negative1571.23712Positive190.751571.65716Negative190.70 733D 720 1572.06Positive190.651572.47724Negative190.601572.88728190.55Positive1573.30733Negative 749D 737 1573.71190.50190.45Positive1574.12741190.40Negative1574.54745190.35Positive1574.95749Negative 766D 753 1575.36190.30Positive190.25 7571575.78Negative190.201576.19761Positive190.151576.61766190.10Negative 782D 770 1577.02Positive190.051577.44774Negative190.001577.85778Positive189.95 7821578.27*1The value which omitted and computed the 3rd place below the decimal point8Data Sheet PL10136EJ03V0DSTable A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (5/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)Negative189.90 799D 786 1578.68Positive189.85 7911579.10Negative189.801579.51795Positive189.751579.93799Negative189.70 816D 803 1580.35Positive189.651580.76807189.60Negative1581.18811Positive189.551581.60816Negative 832D 820 1582.01189.50Positive189.451582.43824189.40Negative1582.85828Positive189.351583.27832189.30Negative 849D 836 1583.69189.25Positive1584.10841189.20Negative1584.52845Positive189.151584.94849Negative 866D 853 1585.36189.10Positive189.05 8571585.78Negative189.001586.20862Positive188.951586.62866Negative188.90 883D 870 1587.04Positive188.85 8741587.46Negative188.801587.88878188.75Positive1588.30883Negative188.70 899D 887 1588.72Positive188.651589.14891Negative188.601589.56895188.55Positive1589.98899Negative188.50 916D 904 1590.41Positive188.45 9081590.83Negative188.40 9121591.25Positive188.351591.67916*1The value which omitted and computed the 3rd place below the decimal pointData Sheet PL10136EJ03V0DS 9Table A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (6/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)933D 921 1592.10Negative188.30Positive188.25 9251592.52Negative188.201592.94929Positive188.15 9331593.36Negative188.10 950D 937 1593.79Positive188.051594.21942188.00Negative1594.64946Positive187.95 9501595.06Negative187.90 967D 954 1595.48Positive187.851595.91959187.80Negative1596.33963Positive187.751596.76967Negative 984D 971 1597.18187.70Positive187.651597.61976187.60Negative1598.04980Positive187.55 9841598.46Negative 6001D 988 1598.89 187.50Positive187.45 9931599.32Negative187.401599.74997187.35Positive1600.176001Negative 6018D 6006 1600.60 187.30Positive187.25 60101601.02Negative187.20 60141601.45Positive187.151601.886018Negative 6035D 6023 1602.31 187.106027Positive187.051602.74187.00Negative1603.166031Positive186.951603.596035Negative 6053D 6040 1604.02 186.90Positive186.85 60441604.45Negative186.80 60481604.88Positive186.75 60531605.31*1The value which omitted and computed the 3rd place below the decimal point10Data Sheet PL10136EJ03V0DSTable A: DWDM wavelength base on ITU-T recommendations (@ T LD = T set) (7/7)Slope Wavelength Code ITU-T Wavelength *1Frequency Monitor4 channel tunable single channel (nm) (THz)6070D 6057 1605.74 186.70NegativePositive186.65 60611606.17Negative186.601606.606066Positive186.551607.036070Negative 6087D 6074 1607.46 186.50Positive186.45 60781607.89Negative186.40 60831608.32Positive186.351608.766087*1The value which omitted and computed the 3rd place below the decimal pointData Sheet PL10136EJ03V0DS 11TYPICAL CHARACTERISTICS (T LD = 25°C, unless otherwise specified)Forward Current I F (mA)T C = 70˚CT h e r m i s t o r R e s i s t a n c e R (k Ω)C o o l e r E l e c t r i c P o w e r C o n s u m p t i o n (W )151020253035SPECTRUMR e l a t i v e I n t e n s i t y (d B )Wavelength λ (nm)OPTICAL OUTPUT POWER FROM FIBER, MONITOR CURRENT (P f MONITOR) vs. FORWARD CURRENTO p t i c a l O u t p u t P o w e r f r o m F i b e r P f (m W )THERMISTOR RESISTANCE vs.AMBIENT TEMPERATUREAmbient Temperature T A (˚C)Laser Set Temperature T set (˚C)–10–30–50–700–20–40–601 529.11 539.11 549.11 534.11 544.1–8030.025.020.015.010.05.04.03.53.02.52.01.51.00.50.00501001502000.300.250.200.150.100.050P fI m (P f )M o n i t o r C u r r e n t (P f M o n i t o r ) I m (P f ) (m A )COOLER ELECTRIC POWER CONSUMPTION vs. LASER SET TEMPERATURERemark The graphs indicate nominal characteristics.Data Sheet PL10136EJ03V0DS12REFERENCEDocument Name Document No. OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE PL10161EOpto-Electronics Devices Pamphlet PX10160EData Sheet PL10136EJ03V0DS 134590 Patrick Henry DriveSanta Clara, CA 95054-1817Telephone: (408) 919-2500Facsimile: (408) 988-0279Subject: Compliance with EU DirectivesCEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.Restricted Substanceper RoHS Concentration Limit per RoHS(values are not yet fixed)Concentration containedin CEL devices-A -AZLead (Pb) < 1000 PPMNot Detected (*) Mercury < 1000 PPM Not DetectedCadmium < 100 PPM Not DetectedHexavalent Chromium < 1000 PPM Not DetectedPBB < 1000 PPM Not DetectedPBDE < 1000 PPM Not DetectedIf you should have any additional questions regarding our devices and compliance to environmentalstandards, please do not hesitate to contact your local representative.Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substancecontent of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to betterintegrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurateinformation but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CELsuppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available forrelease.In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL tocustomer on an annual basis.See CEL Terms and Conditions for additional clarification of warranties and liability.元器件交易网。