006 Electrical Bypasses
2006-66-EC电池指令_中文
(10) 便携式电池及蓄电池是指密封的、普通人能轻易携带的、既不是自动式也不是工业用的电池及蓄 电池，包括干电池（如 AA 和 AAA 电池），用于移动电话、便携式电脑、无线电动工具、玩具及家用 器具（如电动牙刷、刮胡刀、手持式吸尘器）的电池及蓄电池，以及任何消费者用于一般家用器具的电 池及蓄电池。 (11) 欧盟委员会应根据现有科学技术的发展评估修改本指令的必要。尤其是，欧盟委员会应评议用于 无线电动工具的便携式电池及蓄电池的镉豁免条例。无线电动工具是指用于旋转、研磨、打磨、碾碎、 锯、切、剪、钻、打洞、冲击、锤打、铆接、螺旋、抛光或在木材、金属和其他材料上进行相似的过程 的工具，还有割草、挖掘等其他园艺活动用工具。 (12) 欧盟委员会还应监控提高电池及蓄电池生命周期环境表现的科技发展，包括通过参与欧洲共同体 生态管理及审查计划（EMAS），成员国也应鼓励上述行为。 (13) 为了保护环境，废弃电池及蓄电池应被回收。对于便携式电池及蓄电池应该建立高回收率的回收 计划。这意味着应该制定这样回收计划以至最终用户可以方便、免费的丢弃所有的废旧电池及蓄电池。 不同的回收计划和资金安排适用于不同的电池及蓄电池。 (14) 成员国达到废弃电池及蓄电池的高回收率是有利的，这样可以使整个欧洲共同体达到高水平的环 境保护和材料循环再利用。因此本指令应为成员国设置最低的回收及循环再利用目标。基于前一年的年 度平均销售额来计算回收率是可行的，这样可以在所有成员国之间根据电池及蓄电池消费比例形成可以 比较的目标。 (15) 针对含镉和含铅电池及蓄电池应建立特殊的循环再利用要求，目的是使整个欧洲共同体达到高水 平的材料循环再利用，并防止各成员国之间形成差异。 (16) 所有利益相关方都应能参与回收、处理及循环再利用计划。这些计划在制定时应避免对进口电池 及蓄电池、电池贸易造成歧视或形成不平等竞争。 (17) 回收及循环再利用计划应达到最优化，特别是为了将费用及运输过程对环境造成的负面影响减到 最少。处理及循环再利用计划应使用最佳的技术，如 1996 年 9 月 24 日第 96/61/EC 号关于综合污染防 止和控制指令所述。循环再利用的定义应排除能量回收。能量回收的概念在别的欧洲共同体规则中已经 定义了。 (18) 电池及蓄电池应能通过国家电池回收计划或者与废弃电子电气设备一起通过基于第 2002/96/EC 号 指令建立的国家回收计划被单独回收。对于后种情形，作为一个强制性的最低处理要求，回收时电池及 蓄电池必须跟废弃电子电气设备分开。跟废弃电子电气设备分开后，电池及蓄电池必须满足本指令的要 求，特别是它们要满足回收目标和循环再利用要求。 (19)废弃电池及蓄电池管理资金的基本原则应建立在欧洲共同体水平。资金计划应帮助达到高回收率和 循环再利用率，并应使生产者责任的原则生效。本指令定义的所有的生产者应该注册。生产者应对回收、 处理及循环再利用所有回收的电池及蓄电池这个过程付费，当然还要减去出售再利用材料所得的费用。 然而在某些情况下，应用于小的生产者的上述规则应能被证明是正当的。 (20) 为了成功回收，分别回收的好处、可取的回收计划和最终用户在废弃电池及蓄电池管理中的作用 等信息和规定必须提供给最终用户。应对标识系统进行这样的细节安排，以使之提供给最终用户透明、 可靠、清晰的关于电池及蓄电池的信息，包括它们含有哪些重金属。 (21) 为了要达到本指令的目的，尤其是要达到高的分别回收率及循环再利用率，成员国如果使用了经 济手段，例如采用微分税率，他们应该相应的知会欧盟委员会。 (22) 关于电池及蓄电池投放市场、回收及循环再利用的数量，这些可靠的和可比较的数据必须要监控， 以查明本指令的目的是否达到。 (23) 成员国应设置适用于违反本指令规定的关于处罚的规则，以确保规定被贯彻。这些处罚措施必须
Isobar6 六接口抗静电保护器说明书
ISOBAR6Isobar 6-Outlet Surge Protector, 6-ft. Cord, 3300 JoulesMODEL NUMBER: ISOBAR6Highlights6 outlets/6-ft. cord3330 joule ratingAll-metal housing6 foot AC line cord with space-saving angled input plugKeyhole mounting tabs for installation in a varitey of applications120VAC, 50/60Hz electrical compatibility$50,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)Automatic shutoff cuts power to outlets when the protection circuit has been compromisedSpecificationsOUTPUTFrequency Compatibility50 / 60 HzOutput Receptacles(6) 5-15ROutput (Watts)1440Circuit Breaker (amps)12Transformer Accommodation Supports up to 4 large transformer plug accessories without covering remaining outlets Right-Angle Outlets NoINPUTNominal Input Voltage(s) Supported120V ACRecommended Electrical Service120V (110-125V)Input Connection Type NEMA 5-15P input plugInput Plug Features Space-saving right angle input plugInput Cord Length (ft.)6Input Cord Length (m) 1.83Voltage Compatibility (VAC)120Maximum Surge Amps135000Right-Angle Plug YesUSER INTERFACE, ALERTS & CONTROLSSwitches Combination AC circuit breaker and two position red illuminated on/off power switchSURGE / NOISE SUPPRESSIONAC Suppression Joule Rating3330AC Suppression Response Time NM = 0 ns. CM = <1 nsProtection Modes Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression Clamping Voltage (RMS)140AC Suppression Surge Current97,000 amps (36,000 NM / 61,000 CM)RatingAC Suppression Components Used Metal oxide varistors, toroidal balanced chokes, ferrite rod-core inductors and VHF capacitors.Safe Thermal Fusing Prevents unsafe conditions during extreme extended over-voltages and catastrophic occurrencesUL1449 Let Through Rating330VIEEE587 Cat. A RingwaveLess than 35 voltsLet-ThroughEMI / RFI Filtering40-80 dBIsolated Filter Banks Unique isolated filter bank design offers additional filtering between each duplex pair of outlets on the strip toprevent electrical noise interference between connected loads. Includes 3 filter banks.Immunity Conforms to IEE 587 / ANSI C62.41DATALINE SURGE SUPPRESSIONTelephone/DSL Protection NoCable (Coax) Protection NoNetwork (Ethernet) Protection NoPHYSICALShipping Dimensions (hwd / in.)11.5 x 7 x 3Shipping Dimensions (hwd / cm)29.21 x 17.78 x 7.62Shipping Weight (lbs.) 2.9Shipping Weight (kg) 1.32Unit Dimensions (hwd / in.) 2.5 x 6 x 3.5Unit Dimensions (hwd / cm) 6.35 x 15.24 x 8.89Unit Weight (lbs.) 2.4Unit Weight (kg) 1.09Material of Construction MetalIntegrated Keyhole Mounting Tabs Metal end caps are fitted with keyhole mounting tabs for wallmount installationHousing Color Light GrayReceptacle Color BlackColor (AC Line Cord)Light GrayOutlets Measurement (Center toDistance between horizontal outlets = 39.45mm; Distance between vertical outlets = 39.30mmCenter)Keyhole Slot MountingDistance between horizontal tabs = 171.34mm; Distance between vertical tabs = 58.17mmMeasurement (Center to Center)CERTIFICATIONSUL1449 3rd Edition (ACTested to UL1449 3rd Edition requirements by ETLSuppression)cUL / CSA (Canada)Approved for Canada by ETLApprovals Exceeds IEEE 587 category A&B specificationsWARRANTYProduct Warranty Period (Worldwide)Lifetime limited warrantyConnected Equipment Insurance$50,000 Ultimate Lifetime Insurance(U.S., Canada & Puerto Rico)© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:https:///products/product-certification-agenciesISOBAR6。
警告：防止电击，请在安装或维修前断电说明书
(Cat CET5_)Have only qualified personnel service this equipment. If you are not qualified to service this equipment, you can injure yourselves or others, or cause equipment damage.Seules des personnes qualifiées peuvent travailler sur cet apparel. Ne pas être qualifié pour ce travail peut causer des blessures à vousou à d autres et peut endommager l’appareil.Dieses Gerät darf nur von qualifiziertem Personal gewartet werden. Wenn Sie zur Wartung dieses Gerätes nicht qualifizlert sind, können Sie sich Verletzungen zuziehen bzw. andere verletzen oder Schäden am Gerät verursachen.Sólo personal calificado debe dar servicio a este equipo. Si usted no está debidamente calificado para dar servicio a este equipo, puede causar daños en su persona u otras personas, o bien ocasionar daños al propio equipo.Solo personale qualificato deve lavorare su questo dispositivo. Se non siete qualificati per questa attivitá, potreste causare infortuni a voi stessi, agli altri o danneggiare I’apparecchio stesso.Motor Protection Relay Installation Instructions Motorschutzrelais Installationsanweisungen Relais de Moteur Instructions pour I’installation Relay per motore Istruzioni di InstatlazioneProteccion del Motor Instrucciones de InstalaclónRelay Flush Mounting and DimensionsWiring the Main CircuitF1F2F3L1L2L3N CET 5Wye-Wye VT ConnectionFig 2 Voltage ConnectionsOption Card Cat No. CVS 5 is requiredA1A2K1123456CET 5CWEM 3 -Converter Module Cat No. CWE4-2.5Cat No. CWE4-20Cat No. CWE4-180Cat No. CWE4-630Cat No. CWE4-630NFig 3 Relay Without Phase CTsT2Transformer T2 circuit and the CET 5 relay chassis must be grounded in the relay cabinet. This will minimize susceptibility to noise in the ground current measurementFig 4 Relay With phase CTs and Core Balance CTSee the option card or user manual for input voltage rating Slots C,D,and E are for option cardsWiring the Control CircuitL1L2L3SpecificationElectrical RatingMain CircuitsControl CircuitsStandardsCSA 22 2 No 14,EN60947-4-1,EN60947-5-1,UL 508。
欧洲和美洲的电气防爆
欧洲和美洲的电气防爆简介1欧洲共同体的电气防爆欧洲电工标准化委员会（CENELEC）负责欧洲标准的制订工作,该委员会有18个成员国。
这些国家同时也是国际电工委员会(IEC)的成员国，从数量上占IEC成员国的三分之一，而且许多国家是IEC标准化工作的积极参与者。
国际电工委员会第31技术委员会（IECTC31）是负责爆炸性环境用电气设备方面国际标准的制订工作，为了加快标准的制订工作，使IEC标准从纯技术标准向商业用标准转化，IECTC31提出了与欧洲电工标准化委员会加强合作的战略, IECTC31近年来将欧洲一些标准直接作为IEC标准的CD文件分发各成员国征求意见，然后转化为相应IEC标准。
例如IEC60079-0:1998,IEC60079-11:1999都是由相应的EN标准转化的。
从电气防爆的总体上看，欧洲标准与IEC标准差异不大。
按照欧洲标准规定，欧洲共同体各成员国应在规定的期限内将欧洲标准转化为国家标准。
英国在欧洲标准编号之前冠以英国标准的代号BS,其他内容不变。
例如：BS EN50014BS EN50015……等；联邦德国欧洲标准编号之前冠以德国标准的代号DIN,其他内容不变。
例如：DIN EN50014DIN EN50015 ……等。
1.2防爆电气设备的检验和标志1)按照欧共体防爆框架指针(EC (Ex)Frame Directive)76/117/EEC的规定,符合欧洲防爆标准的防爆电气产品欧共体各成员国应市场准入。
防爆电气产品经型式检验合格和工厂条件检查符合要求，法定的检验单位颁发防爆合格认证证书（EEx Certificate of Conformity ）, 产品上允许使用认证标志”EEx”。
标志举例：EEx d ia IIB T42)按照欧洲指针“Directive 94/9/EC of European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres”(ATEX 100a) 的规定，防爆电气产品上除了标志防爆类型、类别和温度级别外，还应标志：设备的类别：I ---煤矿用；II—工厂用；允许使用的爆炸危险场所类别： 1---0区；2—1区；3—2区；M1—煤矿1区；M2—煤矿2区；气体或粉尘： G—气体或蒸气环境；D—粉尘环境；例如：ATEX100a 于1996年3月16日正式生效，按照旧的EC制造的防爆电气设备于2003年6月30日停止流通。
06D PTC混合电机保护系统说明书
INSTRUCTIONSPage 1 of 16Replacement Components Division 6/0599TA516180A.docxcarlyleinstr.dot*99TA516180A* Instruction Sheet Number: 99TA516180A*99TA516180A* (for RCD use only)Description: 06D PTC Hybrid Motor Protection SystemAuthor: Steve Von BorstelDate: May 19, 2016Part Number: 06DA6606DBN*****WARNINGHAZARDS: ELECTRIC SHOCK / PRESSURE / EXPLOSIONREFRIGERANT AND OIL UNDER PRESSURE∙ Bodily injury may result from explosion and/or fire if power is supplied to compressor with terminal box cover removed or unsecured. Terminal pins may blow-out causing injuries, death or fire.∙ Do not touch terminals, or wiring at terminals, or remove terminal cover or any part of compressor until power is disconnected and pressure is relieved. See safety instructions A through E below.ELECTRIC SHOCK∙ Bodily injury or death may result from electrocution if terminal cover is removed while power is supplied to compressor. ∙ Do not supply power to compressor unless terminal cover is secured in place and all service valves are open.Safety Instructions:Service or maintenance must be performed only by trained certified technicians and according to service instructions.A. Follow recognized safety practices and wear protective goggles.B. Disconnect and lockout all electrical power. Electrical measurements during operation must be taken outside of the compressorterminal box.C. Do not disassemble bolts, plugs, fittings, etc. unless all pressure has been relieved from the compressor.D. These modules ARE NOT considered to be user accessible. The Extra-Low Voltage (ELV) circuits of these devices, inconnection with motor-winding-PTCs, ARE NOT Safety Extra Low Voltage (SELV) circuits. Proper measures against electric shock MUST BE provided in the end use application. The correct Carlyle Terminal box for the compressor application does provide this protection.E. The 24VDC module, part number 06DAND0000, DOES NOT have galvanic isolation between the ELV circuit and theconnection for the module’s power supply. For this reason, proper measures against electric shock MUST ALSO BEPROVIDED for the module’s power supply and all other components, which are electrically (directly or indirectly), connected to the device’s power supply, if they will be considered user accessible. The 115/240 VAC and 24 VAC modules, part numbers 06DANB0000 and 06DANC0000 respectively, DO HAVE galvanic isolation between the ELV circuit and the connection for the module’s power supply.Caution: Before starting this service, read through the followings items to ensure you have the correct service kit for your application. In many situations, wiring of this module will be different from the existing motor protection it is replacing.1) This kit is intended to service compressors which use the Kirwan Hybrid Motor Protection system that uses internal PositiveTemperature Coefficient Thermistors (PTCs) embedded in the compressor motor.a) These compressors can be identified by a number (“0”, “1”, “2” or “3”) in the 10th digit of the Carlyle Model No. b) These compressors are equipped with the 6-pin terminal plate.2) This kit can be used to add the Hybrid motor protection to Carlyle compressors w/PTCs which did not originally come with theKriwan module. However, additional components, like a new terminal box and labels, may be required.3) For compressors and/or systems which do not have internal PTCs and use the internal thermostats, refer to Service InstructionSheet No. 99TA516184. These would be Carlyle compressors with “A”, “C” or “G” in the 10th digit of the Carlyle Model No. 4) Part Winding Start compressors with a “B” or “D” in the 10th digit of the model No. cannot use a hybrid motor protection system.!5)Single Phase compressors refer to instructions 99TA516185.6)There are three different control voltages that are available for these protection modules. The control voltage is coded into the KitNo. and the Module No.Control Voltage 10th Digit Comp’r Model No. Kit No. (12th digit) Module No. (6th digit)110 -220 VAC 06DF3132A13650 06DA6606DBN B****06DBN B****24 VAC 06DF3132A2365006DA6606DBN C****06DBN C****24 VDC 06DF3132A3365006DA6606DBN D****06DBN D****7)Each kit has been preprogrammed to trip at the required Maximum Continuous Current (MCC) value. The MCC value is codedinto the last 4 digits of the service kit number and the part number of the module. The number shown in the last four digits represents the MCC value in tenths of an Amp:Example: Required MCC Kit No. (13th – 16th digit) Module No. (7th – 10th digit)13.5 Amps 06DA6606DBNB013506DBNB013544.0 Amps 06DA6606DBNC044006DBNC044020.9 Amps 06DA6606DBNC020906DBNC0209Appendix II is a list of the Carlyle Compressor Models that are supported by these kits. Verify that the MCC of the module corresponds to the compressor being serviced. If any of this information is not correct for the unit being serviced, do not use this kit. Contact RC or Carlyle Compressor for assistance.1 This kitcontains:No. QTY. Part No. Kit No. Description1 1 06DA509598 ALL BRACKET2 106DANB0000 06DA6606DBNB**** 110-120 VAC MODULE06DANC0000 06DA6606DBNC**** 24 VAC MODULE06DAND0000 06DA6606DBND**** 24 VDC MODULE3 1 06DA509599 ALL CURRENTTRANSFORMER4 2 AL56JA126 ALL #6 SCREW FOR CT (NOT SHOWN)5 2 AK87JY078 ALL #6 SCREW FOR MODULE (NOT SHOWN)6 2 99WZ0830QA201214 ALL WIREASSY7 1 06DA509601 ALL MCC PROGRAMMING LABEL8 1 06DA409610 ALL HARDWARE KIT (NOT SHOWN)9 1 06DA509602 ALL WIRING LABEL (NOT SHOWN)123672Verify that kit received is suitable for the compressor and system being serviced. First, make sure the module is intended for Carlyle 06D compressor which is fitted with internal PTCs.3Verify required control voltage of the module is correct for the system/unit supply. If thecompressor was originally shipped with the hybrid motor protection arrangement, it will be reflected in the 10th digit of the Carlyle Model No. with a “1”, “2” or “3”. If the 10th digitcontains a “0” (zero), the compressor was originally shipped without a motor protectionsystem or may have been a service compressor.Control Voltage 10th Digit Comp’r Model No. Kit No. (12th digit) Module No. (6th digit)110 -220 VAC 06DF3132A13650 06DA6606DBS B****06DBN B****24 VAC 06DF3132A2365006DA6606DBS C****06DBN C****24 VDC 06DF3132A3365006DA6606DBS D****06DBN D****TBD 06DF3132A03650∙Verify that the system being service is intended touse the hybrid motor protection system.∙Verify control voltage requirements of the kit matchsystem being serviced or retrofitted.∙Review Steps 14-17 for additional considerations Module – Front Label6 Pin Terminal Plate 06D Comp’rs 10th Digit Contains “0”, “1”, “2” or “3”06C Comp’rs 5th Digit Contains a LetterModule – Back Label4Verify that the MCC value of the new kit and module matches the required value shown in Appendix I and the label on the module being replaced.5Make sure the system and compressor has been properly locked-out and tagged (LOTO) before proceeding with any work.6Remove the terminal box cover. If the compressor was originally fitted with hybrid motor protection system, the terminal box and wiring should resemble the Figure below:MODULECTCOMPRESSOR TERMINAL PLATE7 There are four sets of electrical connections that must be removed and then reconnected on the new module.A)Control Power to the module (Terminals “L” & “N” on the module)B)Module connections for the control circuit (Terminal “11” & “14” on the module)C)Power Lead that is monitored by the CT (Current Transformer) @ the terminal plateD)PTC connections @ the terminal plate (Terminals “7” & “9” on the compressor)8 Disconnect these connections at the locations shown above. If required, mark the wires for the module power and the control circuit connections so they are not mixed or switched during assembly.ABCDPOWER LEADTHROUGH CT9 Remove the screws which hold the entire control module assembly to the terminal box. Two on the side and one inside the box.10 Double check that the labels on the control module being replaced and the new control module are the same.11 Re-install the new module assembly and affix to the terminal box. The screws on the side of the terminal box (#10-16 Thread Forming) are torque to 12-24 in-lbs and the screw in the bottom (#10-32 UNC) is torque to 36-60 in-lbs.12Re-connect the electrical connections removed in Step 8.Below are the associated torque limits with thoseconnections. Refer to the picture in Step 7. Make surethe power connection to the compressor goes throughthe CT and that the components for the compressorterminal pin connection are arranged correctly as shown.The Dished Retainer must be oriented so it extendsthrough the Phase Barrier and the terminal sits on top.CONNECTION TORQUEIN-LBS A) CONTROL POWER TO MODULE9-11 IN-LBSB) CONTROL CIRCUIT TO MODULEC) POWER CONNECTION TO TERMINAL PIN18-30 IN-LBSD) PTC WIRES FROM MODULE TO TERMINAL PINS13 Make sure correct label(s) are installed on the terminal box cover. The labels should be the same as the ones shipped with the kit. If not, install the new labels on the terminal box cover. Torque the terminal box cover screws to 12-24 in-lbs.Retrofitting the PTC Hybrid Motor Protection System to a Carlyle PTC compressor thatcurrently does not use the system.14 If this hybrid motor protection is beingretrofitted to a 6-pin Carlyle compressorwith PTC for the first time, make sure thecompressor has a “Large Folded” terminalbox (06DA407764 for gray)Note:The large folded box required to fit thismotor protection system is not rated foroutdoor use.DISHED RETAINERUP15 Two and four cylinder compressors will require a spacer (06DA509606) under the terminal box to accommodate the large folded box. This spacer is included in the service kit parts bag sent out with each service module. Note: The longer #10-32 screws (1/2” lg) must be used when the spacer is used under the terminal box. 3/8” long screws are used w/o the spacer.SPACER16 Ensure one of the power leads is long enough to be routed through the CT. For this module, it does not matter which power lead goes through the CT. The power lead for either #1, #2 or #3 can be used. Note: only one lead should go through the CT and only once as shown.17 Control voltage will have to be supplied in accordance with the module selected. Power consumption is 3 VA.End.POWER LEADTHROUGH CTAPPENDIX I: TOOLS FOR 06D HYBRID MOTOR PROTECTION SERVICEREVISION RECORDDATEREV.DESCRIPTIONCARLYLE REF. FILE NAME11/10/15 --- INITIAL RELEASE99TA516180_PTC_Hybrid_Mtr_Protech.docx 5/19/16 AADDED 24 VDC MODELS & ASSOCIATED WARNINGS99TA516180A_PTC_Hybrid_Mtr_Protech.docxTOOLTOOL NUMBER SUPPLIER OPERATION S T E P (s)NOTES5/16” NUT DRIVER00941972000P CRAFTSMAN REMOVING & INSTALLING: ∙ TERMINAL BOX COVER ∙ MTR PROTECTION ASSY 6 9 1113#2 PHILLIPS OR FLAT BLADE SCREW DRIVERAWP2X125 FACOM REMOVING/INSTALLING WIRE CONNECTIONS ON MODULE 8 12FLAT BLADE SCREW DRIVER AW10X200 FACOM REMOVING/INSTALLING TERMINAL BARREL NUTS8 12TO FIT .064/.075”SLOTAppendix II – Compressor Model Cross Reference to Module Kit No.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.Appendix II – Compressor Model Cross Reference to Module Kit No. Cont.。
hott s066 user 说明书
S066 User ManualWarning:This device is recommended to use in house. Don’t use this device in high temperature and poisonous environment. Don’t put this device into water to avoid damage. Inserted battery, and don’t put the device close to fire to avoid exploding. Don’t repair and change the device yourself avoid losing warranty. Don’t use for long time, especially in high volume, which will hurt your ear.Important safety notice1. Please read the User Guide.2. Please save the User Guide3. Please pay attention to the Warning4. Please use the device according to the User Guide5. Don’t use this device exceed the function definition.SpecificationSupport Bluetooth call, FM, time display.ode/Device name: HOTTBluetooth Version: BT5.0Range: 10m (Free space)Output power: 3WFrequency: 20Hz~20kHzSNR: ≥80dBBattery capacity: 3.7B 1000mAPlay time: >10H (Default volume)Charging time: 3~4hInserted MICIPX4 waterproofMicro USB interface Charging IN: DC 5V Packaging；Bluetooth kitMicro USB cable User GuideProduct DiagraMain function1. Press power key for 3s to power on or off.2. Short press can play/ pause. Disconnect Bluetooth in BT mode.3. Volume up/ Next4. Volume down/ Previous5. Answer/Reject/Dial call6. Screen display user interface7. Charging with USB cable, connect to DC 5V or PC.8. Blue LED on when working, Red LED on when charging.9. FM/M mode change, BT FM Time10．MIC wholeCharging can reset the device if work abnormally.Product operationA. Running stationPress the power button for 3 seconds, hear the warning tone, the blue led will flash, and it will be on if connected successfully.B. Power offPress the power button for 3 seconds, after hearing the warning tone, the device will power off.C. Bluetooth pairingIf not connected before, you need connect your loudspeaker box with the Bluetooth device according the program below.1. Power on, after hearing the wa rning tone, the box will be in pairing mode, and the blue led will flash.2. Activate your Bluetooth device, and search.3. Select the box name, which was searched by your Bluetooth device.Notice: If the box is being connected with other device, you need disconnect, and search again.4. The password is “0000” if need, and choose “OK”. The password would be different between different manufactures.5. If paired successfully, the blue led will be on all the time. Now,you can use your box to play music and call. When playing the music, the blue led will breath slow. When pause the music, the blue led will flash several seconds, the be on all the time. Notice:If connected with the box before, you need connect according to the instruction below.Activate Bluetooth function in your device, the loudspeaker box will connect with your device automatically and can hear the warning tone.Play music after Bluetooth connectingShort press to play and pause if playing.Long press to play next, and short press to volume up.Long press to play previous, and short press to volume down.Hands free call modeIf connected, you can press to answer the call, and press to hang up when talking. At the same time, music will stop automatically.Charging for the loudspeaker boxBattery inside, can connect the USB cable to PC to charge the box, or connect the USB cable to DC 5V adaptor. When charging, the red led will be on. If charging finished, the red led will be off. Please remove the cable.The working time will depend on the volume level, the higher volume, the shorter time. You need re-charge the box if you didn’t use it for a long time. It’s recommended to charge the box once per month, so that can protect the battery better, and the battery will work for longer time.FM modeLong press into FM scan mode, and save automatically.Short press can play the channel saved.Long press to change the channel saved, long press to delete the channel.Long press/to modify frequency, short press can change volume.Time modePress change key into time mode, long press and type12h/24h system, press /to change.Short press to M/S mode and short press/to set time.Absorbed function when having a bathWhen having a bath, can listen to the music and answer the call, as the product can absorb the wall with the pedestal.Notice:Don’t dip the product into water, which will damage the product.CapacityBluetooth version: BT5.0, support profile: A2DP /HFP/AVRCPThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC ID: YB2-S602Question and instructionIf find some problem when using this product, you can solve according to the solution below.Trouble Trouble shooting SolutionCharge failure USB power charger (notincluded in this package) is not inserted into thewall socket or USBcable (included in thepackage) is not insertedinto the 2.0mm interfaceon the side of thespeakerInsert the chargerinto the wall socket orUSB cable into the2.0mm interface onthe side of thespeakerThe wall socket doesn'twork.Insert the device intoanother wall socket tomake sure theplayback failsThe USB port of thecomputer doesn't work.Make sure yourcomputer is turned onand try another USBport.There is no sound The battery in thespeaker is deadRechargePhone not connected.Read the "speakeractions" section toconnect speakers Volume is too low.Volume up yourproductCan’t connect with theproduct. Can’t pairCheck your Bluetoothdevice if supportA2DP profileSound source offOpen the soundsource/The Bluetooth is offOpen the Bluetooth inyour device Bluetooth isincompatibleUse different playdevicePoor quality/ interrupt The device exceeds therange10m in free space.Notice, all the information above only for your reference.S066中文参考说明书警告此设备只限于室内使用。
Electricity+safety
Overview概述
Hazards危害
Circuit Protection 电路保护 Safety Workplace 安全工作场所
Response应急响应
Electricity safety用电安全 Overview概述
When working around electricity, you need to know how to identify the hazards associated with it, including electrical shock, and how to respond to electrical emergencies.进行与 电有关工作的时候，必须知道怎样识别电的危害，包括电击， 和在紧急情况下怎样做出相应。 Electricity is the most common form of energy in the workplace. It provides light and supplies energy to equipment that you use every day.电是工作场所中最基本的能量形式。 它每天提供光和给设备供应能量 Your personal sness of safe work procedures around electricity. In addition, your ability to respond to an electrical emergency can save your life as well as the life of a coworker.个人安全依赖于对安全用电程序的认 识。另外，对紧急事件的处理能力能挽救个人及同事的生命。
Electricity safety用电安全 Overview概述
Saia-Burgess空调系统用户手册说明书
- 6 -WEEE Directive 2012/19/EC Waste Electrical and Electronic Equipment directiveAt the end of the product life dispose of the packaging and p roduct in a corresponding recycling centre. Do not dispose of the unit with the usual domestic refuse.Do not burn the product !RECOMMENDATIONS AND RULES►Rules regarding electrostatic discharge should be followed. ►If the device is modified in any way, except by the manu -facturer, all warranties concerning operation and safety are invalidated.►Make sure that the local standards and regulations areobserved at all times. Examples of such regulations are VDE 0800 and VDE 0100 or EN 60204-1 for earth grounding.►Use only accessory equipment which comes from or has been approved by Honeywell.►It is recommended that the device be kept at room temper-ature for at least 24 hours before applying power. This is to allow any condensation resulting from low shipping / storage temperatures to evaporate.►The device must be installed in a manner (e.g., in a lockable cabinet) ensuring that uncertified persons have no access to the terminals.►Do not open the device, as it contains no user-serviceable parts inside!►The device is suitable for mounting in fuse boxes conforming to standard DIN 43880, and having a slot height of max. 45 mm.►The device is suitable for panel rail mounting on 35 mmstandard panel rail (both horizontal and vertical rail mounting possible) – see pictures 0G and 0H.STANDARDS, APPROVALS, ETC.PURPOSE OF CONTROL: OPERATING CONTROL and multifunctional non-safety control intended for HVAC in home (residential, commercial, and light-industrial) environments ■24 V models:UL 60730-1, Standard for Automatic Electric Controls for Household and Similar Use, Part 1: General Requirements ■CE-approved■FCC part 15B-compliant.CONSTRUCTION OF CONTROL: Independently mounted electronic control unit with fixed wiring. Panel-mounted on a DIN rail.SHOCK PROTECTION: Class II.POLLUTION DEGREE: 2.RATED IMPULSE VOLTAGE: ■230 V circuits: 2500 V ■ 24 V circuits: 500 V NOTE:K eep AC mains supply/load cables separate from signal wiring!RELAY SPECIFICATIONSCAUTIONRISK OF ELECTRICAL SHOCK OR EQUIPMENT DAMAGES!It is not permitted to combine low voltage and line voltage in the relay block.MU1B-0643GE51 R0418C - 5 -Saia Burgess Controls AGPCD7.LRxx-P5 PG5 ROOM CONTROLLER - MOUNTING INSTRUCTIONS EKeep these instructions together with the device or with the equip-ment documentation!FCette instruction est à conserver avec le contrôleur ou avec la docu-mentation de l’installation !PGuarde estas instruςões junto do regulador ou junto da documentaςão da instalaςão!D Diese Anleitung ist beim Gerät oder in der Anlagendokumentation aufzubewahren!IQueste istruzioni devono essere conservate insieme al lettore o con la documentazione dell´impianto!S Denna instruktion skall förvaras tillsammans med regler eller anlägg-ningsdokumentationen!DKOpbevar denne vejledning sammen med regler eller med anlægsdoku-mentationen!N Denne veiledningen skal oppbev-ares sammen med regler eller anleggs-dokumentasjonen!FITätä ohjetta tulee säilyttää laitteen läheisyydessä tai yhdessä muiden dokumenttien kanssa!ES Conserve estas instrucciones con el recalar con la documentación de la instalación.NL Deze handleiding moet bij de rege-laar, of met de documentatie van de installatie worden bewaard!PLInstrukcję obsługi należy przechowy -wać przy urządzeniu albo w doku -mentacji technicznej.Copyright © 2018 Saia-Burgess Controls AG All Rights ReservedMU1B-0643GE51 R0418CSupportDocumentationMU1B-0643GE51 R0418C - 4 -Saia Burgess Controls AG PCD7.LRxx-P5 PG5 ROOM CONTROLLER - MOUNTING INSTRUCTIONS2. D IN-RAIL MOUNTING PCD7.LRxx-P5 + MOUNTING IRM-RxC3. DISMOUNTING IRM-RxC + DISMOUNTING PCD7.LRxx-P5 from DIN-RAILMU1B-0643GE51 R0418C - 3 -Saia Burgess Controls AG PCD7.LRxx-P5 PG5 ROOM CONTROLLER - MOUNTING INSTRUCTIONS- 2 -Saia Burgess Controls AG PCD7.LRxx-P5 PG5 ROOM CONTROLLER - MOUNTING INSTRUCTIONS MU1B-0643GE51 R0418C。
bs7671标准
bs7671标准
BS7671是英国的电气安全标准，全称是《BS 7671:2018+A2:2022电气装置的要求– IET布线规范》(BS7671:2018+A2:2022 Requirements for Electrical Installations - IET Wiring Regulations)，由英国标准化协会(BSI)发布。
BS7671标准介绍了对弧光故障检测设备(AFDD)的新要求，对建筑物消防安全设计文档的更新要求，以及关于ProSumer低压电气安装的新章节。
该标准旨在确保电气安装的安全性和可靠性，保障人们的生命和财产安全。
具体来说，它涵盖了电气装置的设计、安装、检查和维护等方面的要求，以确保电气装置在正常工作条件下能够安全运行，并且在出现故障时能够迅速切断电源，防止事故的发生。
BS7671标准的内容非常详细和具体，包括电气装置的各个方面，如电源、电路、开关、保护设备、电缆和电线等。
该标准还规定了电气装置的验收、测试和维护等方面的要求，以确保电气装置的质量和可靠性。
总之，BS7671标准是英国的一项重要的电气安全标准，它为保障人们的生命和财产安全发挥了重要作用。
防漏电插排技术参数
防漏电插排技术参数英文回答：Electrical safety is of utmost importance in our daily lives, and one crucial device that helps prevent electrical accidents is the leakage protection socket strip, also known as the anti-leakage power strip or the ground fault circuit interrupter (GFCI) power strip. This device is designed to protect users from electric shock by detecting any leakage current and cutting off the power supply instantly.The main technical parameters to consider when choosing a leakage protection socket strip are as follows:1. Rated Current: This refers to the maximum current that the power strip can handle safely. It is important to choose a power strip with a rated current that meets the requirements of the devices you plan to plug into it. For example, if you have multiple appliances with a combinedcurrent draw of 10A, you should choose a power strip with a rated current higher than 10A to ensure safe operation.2. Rated Voltage: This parameter specifies the maximum voltage that the power strip can handle. It is important to choose a power strip with a rated voltage that matches the voltage of your electrical system. In most cases, the standard rated voltage is 220V or 110V, depending on the country.3. Leakage Current: This parameter indicates the maximum allowable leakage current that the power strip can detect. The lower the leakage current, the more sensitive the power strip is to detecting potential electrical faults.A typical leakage current for a high-quality power strip is around 5mA.4. Response Time: This refers to the time it takes for the power strip to cut off the power supply after detecting a leakage current. A shorter response time ensures faster protection against electric shock. A good power stripshould have a response time of less than 25ms.5. Overload Protection: In addition to leakage protection, some power strips also provide overload protection. This feature prevents excessive current flow and protects the connected devices from damage. When the current exceeds the rated current of the power strip, it automatically cuts off the power supply. This is especially useful when using power-hungry devices such as air conditioners or heaters.To illustrate the importance of these technical parameters, let's consider a scenario where I have a power strip with a rated current of 10A and a rated voltage of 220V. I have plugged in a hairdryer that draws a current of 8A. One day, due to a faulty wire in the hairdryer, a leakage current of 6mA occurs. In this case, the powerstrip should detect the leakage current and cut off the power supply immediately, protecting me from potential electric shock.中文回答：防漏电插排是我们日常生活中非常重要的电气安全设备之一，它能够帮助我们预防电气事故。
FLUKE L-38L 热电偶温度计说明书
L-38LSpecificationsThermocouple Measurement Range:Type K:-200 to 1372ºC (-328 to 2501ºF)Type J:-210 to 1200ºC (-346 to 2192ºF)Type T:-250 to 400ºC (-418 to 752ºF)Type E:-210 to 1000ºC (-346 to 1832ºF)Type R & S:0 to 1767ºC (-32 to 3212ºF)Type N:-150 to 1300ºC (-238 to 2372ºF)Accuracy:Type K:±(0.05% rdg + 0.7ºC) -250 to 100ºCType T:±(0.05% rdg + 0.7ºC) -100 to 1372ºCType E:±(0.05% rdg + 1.4ºF) -418 to -148ºFType N:±(0.05% rdg + 1ºF) -148 to -2501ºFType R:±(0.05% rdg + 2ºC) 0 to 1767ºCType S: ±(0.05% rdg + 4ºF) 0 to 3212ºFOperating Temperature & Humidity: 0 to 50ºC (32 to 122ºF); 0 to 80% RH Storage Temperature and Humidity:-10 to 60ºC (14 to 140ºF); 0 to 80% RH Power:9 V battery (included), NEAD 1640 or JIS 006P, IEC 6F22Battery Life:Approx 200-hour Alarm:Buzzer, hi/lo setting Timer:Up to 100-hourߜMeasures K/J/T/E/R/S/N Thermocouple Types ߜ5-Digit LCDߜ0.1 Resolution, Swift ResponseߜDual Inputs and Display ߜFunctions: Max, Min,Hold, Rel, Time Type,Set, Limit, Hi/Lo, T1, T2,T1 - T2, ºC, ºF, KߜAuto Power-Off or Never Auto Power-Off FeatureHH66R£111The HH66R is a portable, dual-input digital thermometer. Its pushbutton keypad, offering a wide range of functions, allows for easy one-handed operation. The HH66R comes with an RS232 cable and Windows-compatible software for downloading data to a PC. Theminimum transmission timing setting is 1 second and the maximum is 59 minutes, 59 seconds.Handheld Thermocouple Thermometer with RS232Comes with meter, 9 V battery, 2 Type K beaded wire thermocouples, operator’s manual, carrying case, RS232 cable and software.Ordering Example: HH66R,dual-input Type K thermocouple thermometer, £111.HH66R thermometer, £111, comes with 9 V battery, 2 Type K beaded wire thermocouples, operator’s manual, carrying case, RS232cable and software.Thermocouple Connections:2 miniature SMP connections Communications:RS232 with Windows softwareCommunications Connection: RS232 jack Thermocouple Input Protection:AC/DC 24 VrmsOverload Indicator:“OL”Dimensions:38 H x 56 W x 130 mm L (1.5 x 2.2 x 5.1")Weight:Approx 180 g (0.4 lb)。
2006_66_EC, 电池新法案-2013_56_EU常见问题
Commission Services document - not legally binding
Foreword This Frequently Asked Questions (FAQ) document on Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators updates and replaces an earlier version of the document. It takes account of a number of amendments to the Directive including those agreed under Directive 2013/56/EU, which entered into force on 30 December 2013 and which Member States are required to transpose into national law by 1 July 2015 The document is principally intended to help competent public authorities and economic operators interpret the provisions of the Directive in order to ensure compliance with the Directive’s requirements. However, the Directive being addressed only to the Member States, the rights and obligations for private parties exclusively flow from the measures enacted by the authorities of the Member States to implement it. This FAQ document is considered to be a ‘living document’ and the Commission may update it as necessary in light of the experience with the implementation of the Directive and any future requirements. Finally, as is customary, this FAQ document reflects the views of DG Environment and as such is not legally binding. Binding interpretation of EU legislation is the exclusive competence of the Court of Justice of the European Union.
Eaton PDG23P0060E3RN 电源防护模型电路保护器说明说明书
Eaton PDG23P0060E3RNEaton Power Defense molded case circuit breaker, Globally Rated, Frame 2, Three Pole, 60A, 100kA/480V, PXR20 LSIG w/ Relays, No TerminalsEaton Power Defense molded case circuit breakerPDG23P0060E3RN 78667920965388.9 mm 152.4 mm 104.6 mm 1.82 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant UL 489CSAIEC 60947-2CCC MarkedProduct NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertificationsRelays100 kAIC at 480 Vac260060 A60 AThree-pole600 VPD2 Global22 kAIC Icu @125 Vdc100 kAIC @480V (UL)85 kAIC Icu/ 40 kAIC Ics/ 187 kAIC Icm @480V Brazil (IEC) 35/25 kAIC Icu/ 18/13 kAIC Ics @525V South Africa (IEC) 22 kAIC Icu @250 Vdc35/25 kAIC @600V (UL/CSA)100 kAIC Icu/ 70 kAIC Ics/ 220 kAIC Icm @380-415V (IEC) 10 kAIC Icu/ 5 kAIC Ics/ 21 kAIC Icm @690V (IEC)200 kAIC @240V (UL)200 kAIC Icu/ 150 kAIC Ics/ 440 kAIC Icm @240V (IEC) 100 kAIC Icu/ 65 kAIC Ics/ 220 kAIC Icm @440V (IEC)25 kAIC @600V (UL/CSA)ElectronicClass AComplete breaker Eaton Power Defense MCCB PDG23P0060E3RN 3D drawingConsulting application guide - molded case circuit breakersPower Xpert Protection Manager x64Power Defense technical selling bookletPower Defense molded case circuit breaker selection posterPower Defense brochurePower Defense molded case circuit breakers - Frame 2 product aidPower Xpert Release trip units for Power Defense molded case circuit breakersMolded case circuit breakers catalogPDG2 CB reportPower Defense Declaration concerning California’s Proposition 65PDG4 CCC certificationPDG4 CB reportEU Declaration of Conformity - Power Defense molded case circuit breakersPower Defense Frame 2 global terminal shield, 3 pole - IL012330EN Power Defense Frame 2 screw terminal_end cap kit, 225A, 3 pole instructions - IL012258EN H01Power Defense Frame 2 Direct Rotary Handle Assy With Interlock Version Instructions (IL012138EN).pdfPower Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2256W instructions - IL012242EN H01Power Defense Frame 2 PDG2 and PDC(E)9 breaker instructions -IL012106ENPower Defense Frame 2 terminal kit - PDG2X3(2)(4)TA225RF instructions - IL012245EN H01Power Defense Frame 2 shunt trip UVR instructions - IL012130EN Power Defense Frame 2 clamp terminal (steel), 20A, 3 pole instructions - IL012246EN H03Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA150RF instructions - IL012244EN H01Special featuresInterrupt ratingFrameRated operation voltage (Ue) at AC - max Trip ratingAmperage RatingNumber of polesVoltage rating - maxCircuit breaker typeInterrupt rating rangeSwitch off techniqueClassCircuit breaker frame type 3D CAD drawing package Application notes BrochuresCatalogsCertification reports Installation instructionsNo Terminals 600 Vac PXR 20 LSIG Power Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 2 tunnel terminal (aluminum), 150A, 3 pole instructions - IL012238EN H03Power Defense Frame 2 handle mech direct rotary handle instructions - IL012134ENPower Defense Frame 2 handle mech variable depth rotary handle instructions - IL012136ENPower Defense Frame 1 IEC and Frame 2 Rotary Mechanism with NFPA Handle Attachment Instructions (IL012260EN).pdfPower Defense Frame 2 tunnel terminal (aluminum), 50A, 3 pole instructions - IL012236EN H03Power Defense Frame 2 box terminal (steel), 100A, 3 pole instructions - IL012234EN H03Power Defense Frame 2 tunnel terminal (aluminum), 100A, 3 pole instructions - IL012237EN H03Power Defense Frame 2 box terminal (aluminum), 225A, 3 pole instructions - IL012235EN H03Power Defense Frame 2 locking devices and handle block instructions - IL012149ENPower Defense Frame 2 Bell Alarm Switch Instructions (IL012154EN).pdf Power Defense Frame 2 bell alarm switch instructions - IL012154EN Power Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2253W instructions - IL012243EN H01Power Defense Frame 1-2-3-4 IP door barrier assembly instructions -IL012278ENPower Defense Frame 2 tunnel terminal kits - PDG2X1TA225K instructions- IL012239EN H01Power Defense Frame 2 TMTU Aux, Alarm, ST and UVR Animated Instructions.rhPower Defense Frame 2 Handle Mech Variable Depth Rotary Handle Animated Instructions.rhPower Defense Frame 2 Locking Devices and Handle Block Animated Instructions.pdf.rhPower Defense Frame 2 withTMTU, Shunt Trip_UVR Animated Instructions.rhPower Defense Frame 2 Bell Alarm with PXR Animated Instructions.pdf.rhPower Defense Frame 2 Aux, Alarm, Shunt Trip, and UVR How-To Video Power Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoTerminalsVoltage ratingTrip TypeInstallation videosMultimediaEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaPower Defense Frame 2 Direct Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense molded case circuit breakers Eaton Power Defense for superior arc flash safety Power Defense Frame 5 Trip Unit How-To Video Power Defense Frame 6 Trip Unit How-To Video Power Defense Breakers Eaton Specification Sheet - PDG23P0060E3RN Power Defense time current curve Frame 2 - PD2Making a better machineMolded case and low-voltage power circuit breaker health Intelligent circuit protection yields space savings Intelligent power starts with accurate, actionable data Single and double break MCCB performance revisited Safer by design: arc energy reduction techniques Molded case and low-voltage breaker healthSpecifications and datasheetsTime/current curvesWhite papers。
HARMONY SINGER 2 用户手册说明书
HARMONY SINGER 2Battery-Powered Vocal Effects Stompbox with Guitar-Controlled Harmony, Reverb and ToneUser Manual2Harmony Singer 2 User ManualLEGAL DISCLAIMER LIMITED WARRANTY Terminals marked with this symbol carryelectrical current of suffi cient magnitudeto constitute risk of electric shock.Use only high-quality professional speaker cables with¼" TS or twist-locking plugs pre-installed. All otherinstallation or modifi cation should be performed onlyby qualifi ed personnel.This symbol, wherever it appears,alerts you to the presence of uninsulateddangerous voltage inside theenclosure - voltage that may be suffi cient to constitute a risk of shock.This symbol, wherever it appears,alerts you to important operating andmaintenance instructions in the accompanying literature. Please read the manual.CautionTo reduce the risk of electric shock, do notremove the top cover (or the rear section).No user serviceable parts inside. Refer servicing toqualifi ed personnel.CautionTo reduce the risk of fi re or electric shock,do not expose this appliance to rain andmoisture. The apparatus shall not be exposed to drippingor splashing liquids and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.CautionThese service instructions are for useby qualifi ed service personnel only.To reduce the risk of electric shock do not perform anyservicing other than that contained in the operationinstructions. Repairs have to be performed by qualifi edservice personnel.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.8. Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifi ers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where they exit from the e only attachments/accessories specifi ed by the e only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13.Unplug this apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15.The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.16.Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.17.Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effi cient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city offi ce, or your household waste collection service.18.Do not install in a confi ned space, such as a book case or similar unit.19.Do not place naked fl ame sources, such as lighted candles, on the apparatus.20.Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection e this apparatus in tropical and/or moderate climates.MUSIC Group accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2016 All rights reserved.For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at/warranty.3Harmony Singer 2 User Manual1.Controls(5)(4)(8)(6)(7)(1)HARMONY knob selects the harmonies that will be blended with your voice.See Chapter 2: Using the Harmony Knob for details.(2)LEVEL knob adjusts the volume of the harmonies.(3)REVERB knob selects the type and amount of reverb effect on your voice.The 3 types of reverb appear in order from the smallest space (Room) to the largest (Hall). Adjusting the knob within your preferred reverb space determines how pronounced the effect will be. Turning the knob fully counterclockwise turns the reverb off.(4)BATTERY LED indicates the battery level, with green showing full life,yellow being partial life, and red to alert that the batteries should be changed.(5)TONE button engages a preset combination of adaptive EQ, compression,de-essing, and noise gate. “Normal ” and “Less Bright ” settings can be toggled by holding the Tone button and pressing the footswitch.(6)ON/OFF LED lights when the effect is engaged.(7)FOOTSWITCH bypasses the harmony effect,but does not affect the reverb or Tone status. (8)USB input accepts a micro USB cable for connection to a computer. Use the VoiceSupport application to install firmware updates, and for other features depending on your product.Download VoiceSupport from /products/voicesupport/(9)ON/OFF switch powers the pedal on and off. (10) POWER input accepts a 9V power cable (not included).(11) OUT jack accepts a balanced XLR cable for connection to a mixer or active speaker. (12) MIC input jack accepts a balanced XLR cable to connect your microphone.4Harmony Singer 2 User Manual 2.OperationConnection5Harmony Singer 2 User Manual•Connect a microphone to the MIC jack•Connect the OUT jack to a mixer, interface or active speaker •Connect a guitar to the Guitar Input jack on the right side of the pedal •Connect the left Guitar Output jack to an amplifier or mixing console Optional:•Connect a micro USB cable to a computer•Connect power cable•Using the Harmony KnobThe Harmony knob selects a single harmony voice or combination of voices higher or lower in pitch than your voice. The chart below shows name and pitch intervals for each position on the Harmony knob.Guitar InputConnect any guitar pedals between Harmony Singer’s Guitar Output jack and the input of your amp. Connecting and activating some guitar pedals before the Guitar Input jack may adversely affect vocal harmony production.Tips:• Strumming chords works better than single note playing for harmony control• When changing chords, ensure that the root and 3rd of each new chord are played clearly• To harmonize correctly from the first chord of a song,briefly play the first chord before singing Momentary ModeThe standard function of the footswitch is a latching style, meaning that each press of the footswitch turns the harmony on and off. Alternatively, the pedal can operate in momentary mode, meaning that the harmony is only active while the footswitch is held down. As soon as you release the footswitch,the harmony is bypassed.To switch the unit to momentary mode, hold the Tone button down while powering the unit on. Repeat the process to return to latching mode. Changing the BatteriesHarmony Singer 2 can operate on 4 AA batteries. Remove the single screw on the bottom of the pedal to open the battery door. Make sure to observe correct polarity when inserting the batteries.Auto GainHarmony Singer 2 will automatically adjust the gain setting for your microphone, eliminating the need for manual adjustments and ensuring that a good signal is passed to the mixer without any unwanted distortion.24 V Phantom PowerPhantom power is always active on the Harmony Singer 2. This will power condenser microphones, but will not affect dynamic mics either.Mic ControlMic Control allows you to control the effect's on/off status via anMP-75 microphone. Press and hold the footswitch while powering up the unit to toggle Mic Control.Note that when using a condenser microphone, Mic Control should be disabled to prevent unwanted on/off switching.6Harmony Singer 2 User Manual3.SpecificationsMic Input Impedance: Balanced: 2.68 kOhmMic Input Level @ 0 dBFS: -42 dBu to +1 dBuEIN @ Max Mic Gain Rg = 150 Ohm: -126 dBuMic input SNR: >104 dBGuitar Input impedance: 1 MOhmGuitar Input Level @ 0 dBFS: -7 dBU to 17 dBuGuitar Input SNR: >115 dBOutput Impedance, Bal./Unbal.: 200/100 OhmOutput Full Scale: +1 dBuDynamic Range: >104 dB, 20 Hz to 20 kHzFrequency Response: +0/-0.3 dB, 20 Hz to 20 kHzPower Supply (Optional): 9 V / 670 mAPower Consumption: 6 WOperating Temperature: 32° F to 122° F (0° C to 50° C)Storage Temperature: -22° F to 167° F (-30° C to 70° C)Humidity Max.: 90 % non-condensingDimensions: 5.4" x 3.5" x 2.3" (140 x 90 x 60 mm) Weight: 0.92 lb. (420 g)For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete detailsonline at /warranty.Due to continuous development, these specifications are subject to change without notice7Harmony Singer 2 User Manual。
正泰 DDSU666.004.0006型单相电子电能表（DIN-Rail）使用说明书
Type DDSU666.004.0006Single phase electronic energy meter(DIN-Rail)Operation ManualZTY0.464.1224Zhejiang Chint Instrument & Meter Co., Ltd.May, 20191. Brief Introduction1.1 Main application & applicable rangeType DDSU666 single phase electronic energy meter (din-rail) (hereinafter referred to as the “instrument”) is designed based on power monitoring and energy metering demands for electric power system, communication industry, construction industry, etc. as a new generation of intelligent instrument combining measurement and communication function, mainly applied into the measurement and display for the electric parameters in the electric circuit including voltage, current, power, frequency, power factor, active energy, etc. The network can be realized through RS485 communication interface and external device. Adopting the standard DIN35mm din rail mounting and modular design, it is characterized with small volume, easy installation and easy networking, widely applied into the internal energy monitoring and assessment for industrial and mining enterprises, hotels, schools, large public buildings.Complied standards:IEC62052-11《Electricity metering equipment(AC)-General requirements, tests and test conditions- Part11:Metering equipment 》；IEC62053-21《Electricity metering equipment(AC)-Particularrequirements-Part21: Static meters for active energy(classes 1 and 2)》；MODUS-RTU protocol.1.2 Product Features1)Metering the positive and negative active power;2)Adopting wide LCD, it has clear vision.3)RS485 communication function with communication protocol complied with Modbus-RTU；4)Adopting DIN35mm standard din rail mounting, structural modular design, it is characterizedwith small volume, easy installation and easy networking.1.3 Model composition and meaningsFigure 1 Model No. & meanings1.4 Applicable environmental condition.Regulated working temperature range: -25℃～+60℃；Limited working temperature range: -35℃～+70℃；Relative humidity(Annually average):75％；Atmospheric pressure:86kPa～106kPa。
电源说明书
Output4 hr.of Stand-by &24 hr.of Stand-by &60 hr.of Stand-by &5 Minutes of Alarm 5 Minutes of Alarm 5 Minutes of Alarm 12VDC / 40 AH Battery Stand-by = 6.0 amp Stand-by = 1.0 amp Stand-by = 300mA Alarm = 6.0 ampAlarm = 6.0 amp Alarm = 6.0 amp24VDC / 12 AH Battery Stand-by = 200mA Alarm = 6.0 amp24VDC / 40 AH BatteryStand-by = 6.0 amp Stand-by = 1.0 amp Stand-by = 300mA Alarm = 6.0 amp Alarm = 6.0 amp Alarm = 6.0 ampInstallation Instructions:The AL600ULXB should be installed in accordance with article 760 of The National Electrical Code as well as NFPA 72and all applicable Local Codes.1.Mount the AL600ULXB in desired location/enclosure.2.Set the AL600ULXB to the desired DC output voltage by setting SW1 (Fig. 2)to the appropriate position (refer to Power Supply V oltage Output Selections chart ).3.Connect AC power (115V AC 60Hz) to terminals marked [L, G, N] (Fig. 2). Use 18 AWG or larger for all power connections (Battery, DC output, AC input).Use 22 AWG to 18 AWG for power limited circuits (AC Fail/Low Battery reporting).Keep power limited wiring separate from non-power limited wiring (115V AC / 60Hz Input,Battery Wires).Minimum .25” spacing must be provided.4.Connect devices to be powered to terminals marked [ + D C -] (Fig. 2).5.Measure output voltage before connecting devices. This helps avoid potential damage.AL600ULXBUL Recognized Power Supply/ChargerRev. 120300Overview:The AL600ULXB is a power supply/chargers that converts a 115V AC 50/60Hz input, into a power limited 12VDC or 24VDC output (see specifications).6.For Access Control applications, batteries are optional. When batteries are not used a loss of AC will result in the loss of output voltage. When the use of stand-by batteries is desired, they must be lead acid or gel type. Connect battery to terminals marked [+ BAT --] (Fig. 2). Use two (2) 12VDC batteries connected in series for 24VDC operation (battery leads included).7.Connect appropriate signaling notification devices to AC FAIL & BAT FAIL (Fig. 2)supervisory relay outputs.Note:When used in fire alarm, burglar alarm or access control applications, “AC Fail” relay must be used to provide a visual indication of AC power on.Maintenance:Unit should be tested at least once a year for the proper operation as follows:Output V oltage Test:Under normal load conditions, the DC output voltage should be checked for proper voltage level (refer to Power Supply V oltage Output Specifications chart ).Battery Test:Under normal load conditions check that the battery is fully charged,check specified voltage both at battery terminal and at the board terminals marked [ + BAT ---] to insure there is no break in the battery connection wires.Note:Maximum charging current under discharge is .7 amp.Note:Expected battery life is 5 years, however it is recommended changing batteries in 4 years or less if needed.LED Diagnostics:Red (DC)Green (AC)Power Supply StatusON ON Normal operating conditionON OFF Loss of AC, Stand-by battery supplying power OFF ON No DC outputOFFOFFLoss of AC. Discharged or no stand-by battery. No DC output.Terminal Identification:Terminal Function/DescriptionLegend L, G, NConnect 115V AC 60Hz to these terminals: L to hot, N to neutral, G to ground.+ DC -12VDC / 24VDC @ 6 amp continuous non-power limited output.AC FAIL Used to notify loss of AC power, e.g. connect to audible device or alarmN.C., C, N.O.panel. Relay normally energized when AC power is present. Contact rating 1 amp @ 28VDC.AC or brownout fail is reported within 1 minute of event. To delay reporting of up to 6 hrs., cut “AC delay” jumper and reset power to unit.BAT FAIL Used to indicate low battery condition, e.g. connect to alarm panel.N.C., C, N.O.Relay normally energized when DC power is present. Contact rating 1 amp @ 28VDC.A removed battery is reported within 5 minutes. Battery reconnection is reported within 1 minute.Low battery threshold:********************************************,24VDC output threshold set @ approximately 21VDC.+ BAT -Stand-by battery connections. Maximum charge current .7 amp.Altronix is not responsible for any typographical errors. Altronix Corp.140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056website:,e-mail:*****************,LifetimeWarranty,MadeinU.S.A.IIAL600ULXB - Rev. 120300I13DMEMBER。
船舶电子电气英语单词
abbreviation
[əˌbri:viˈeɪʃn] [əˌbriviˈeʃən]
n.省略，缩写，简化，缩写词，略语；[数学]约分；[音乐]略号
820
propeller
[prəˈpelə(r)] [prəˈpɛlɚ]
n.螺旋桨，推进器；=propellor
351
domestic
[dəˈmestɪk] [dəˈmɛstɪk]
1150
very large crude carrier
[ˈveri lɑ:dʒ kru:d ˈkæriə] [ˈvɛri lɑrdʒ krud ˈkæriɚ]
超级油轮
49
arbitrary
[ˈɑ:bitrəri] [ˈɑrbɪˌtrɛri]
adj.随意的，任性的，随心所欲的；主观的，武断的；霸道的，专制的，专横的，独断独行的；乱
295
deck
[dek] [dɛk]
n.甲板，舱板；[建]平屋顶，桥面；[铁路]客车车顶；〈俚〉地面vt.装饰；给…铺上甲板；打扮
1173
waterline
[ˈwɔ:təlaɪn] [ˈwɔːtərlaɪn]
n.〔船的〕吃水线，水线
104
boardside
船舷
117
bridge
[brɪdʒ] [brɪdʒ]
汽缸盖，汽缸头罩[体罩]
499
gearbox
[ˈɡiəbɔks] [ˈɡɪrˌbɑks]
n.变速箱；变速器；齿轮箱
916
scavenging box
扫气箱
326
diesel engine
[ˈdi:zəl ˈendʒin] [ˈdizəl ˈɛndʒɪn]
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Edit occasion in Master View
Use of Electrical Bypasses _ Pros and Cons
Pros
Operation if drive unable
Cons (continued
Larger size / more space Result in larger motors and controls (can’t use load limiting logic) -cost – equipment, wiring and installation - motors 1.5 % less efficient Risk that operation will continue on bypass for extended period or life - high power costs Increased Radio frequency interference as more wiring exposure and connections
• In some areas the use continues today
Edit occasion in Master View
Use of Electrical Bypasses _ Pros and Cons
Pros
Operation if drive unable
Cons
Less reliable – today bypasses are less reliable than drives - modern drive warranty rate less than .25%
Design Envelope IVS advantages
vs. wall / rack mounted VFD and bypasses
VS.
Edit occasion in Master View
Use of Electrical Bypasses - Pros and Cons
• Electrical bypasses began to be used when drive reliability was very poor – 40 years ago
• Armstrong does not recommend the use of bypasses. • If additional redundancy is needed Armstrong recommends an additional DE IVS pumping unit.
Edit occasion in Master View
More trips as bypasses do not contain controlstc
Increased costs - extending payback period -could pay for an extra pumping unit High starting current (6x) -high peak demand charges -wear and tear on motor and system (major cause of broken rotor bars)
Edit occasion in Master View
Use of Electrical Bypasses - Pros and Cons
• Today drives are more reliable than bypasses
• There are many disadvantages to using bypasses.