CSQ-333E中文资料
SIEMENS SIMATIC S7-300 400的系统软件和标准功能 说明书
IMATICSS7-300/400的系统软件和标准功能考手册/2002 版前言组织块 1 SFC常用参数 2 拷贝与块功能 3 用于控制程序执行的SFCS 4 SFCS控制系统时钟 5 SFCS控制运行时间定时器 6 用于传送数据记录的SFC 7 根据PNO AK1131的DPV1 SKB 8 用于日时钟中断操作的SFC 9 处理延时中断SFC 10处理同步故障的SFC 11 处理中断和异步故障的SFC 12用于诊断的SFC 13用于刷新过程映象和处理位区域的SFC与SFB 14模板寻址的系统功能15分布式I/O使用的SFC 16用于全局数据通讯的SFC 17 S7通讯及S7基础通讯概述18 S7通讯19 SFC非组态S7连接通讯20生成块相关的信息21 IEC定时器和IEC计数器22 IEC功能集23用于集成控制功能的SFB 24用于紧凑型CPU的SFB 25用于H CPUS的SFCS 26集成功能（用于带集成I/O的CPUS）27塑料工艺28诊断数据29系统状态列表（SSL）30事件31 SFC和SFB表32术语参121-2前言目的本手册旨在提供全面的组织块（OB ）、系统功能（SFC ）、系统和标准功能（SFC ）和S7-300、S7-400的CPU 操作系统里的IEC 功能。
在附录中描述了诊断数据、系统状态列表（SZL ）以及事件。
注意关于CPU 中提供的这些功能与块的详细信息，请参见“S7-300可编程控制器，硬件和安装手册”/70/或“S7-400/M7-400可编程控制器模板规范手册”参考手册/101/和指令表7-400可编程控制器/102/（相关CPU 版本）中关于这些功能的详细描述。
关于相关CPU 的CFB和S7信号功能特性，请参见/70/和/101/中详细描述。
关于CPU 操作系统、编程设计和通讯、诊断功能，请参考“硬件配置和通讯连接STEP 7 V5.2”手册/234/。
如何在程序中调用功能和功能块，参见编程语言解释。
多参数变送器Liquiline CM442 CM444 CM448技术资料说明书
Products Solutions Services TI00444C/28/ZH/18.15技术资料Liquiline CM442/CM444/CM448多参数变送器最多八个测量通道，连接Memosens数字式传感器可扩展的多参数控制器，用于工业过程和环境领域的监测和控制应用最多可以连接8个Memosens传感器算术功能，计算新测量值数字式现场总线(HART、PROFIBUS、MODBUS、工业以太网(Ethernet/IP))和内置Web服务器可选清洗功能、控制器和报警继电器可选数字式或模拟式输入/输出，实现信号传输坚固耐用的非防爆型塑料仪表外壳适用于：•水和污水•电厂•化工行业•其他工业应用优势•最高过程安全性：–带图形显示的引导菜单，操作简单–标准操作方法，适用于Liquiline变送器、采样仪和分析仪平台上的所有产品•快速调试：–Memosens：实验室标定传感器&即插即用–预设置Liquiline变送器–简便功能扩展，满足系统的新要求•最小库存：–交互式平台，模块化概念(例如：同一模块用于不同参数)–集成至Fieldcare和W@M中，实现高效资产管理Liquiline CM442/CM444/CM4482Endress+Hauser目录功能与系统设计 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4测量系统 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4应用实例 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5设备结构 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6插槽和端口分配 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6订购模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6硬件升级的基本原则 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6确定硬件发货状态 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7接线端子分配 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7设备设置实例(CM442-**M1A1F0*) . . . . . . . . . . . . . . . . . . . 8CM442的功能图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9设备设置实例(CM444-**M42A1FA*) . . . . . . . . . . . . . . . . . 10CM444的功能图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11设备设置实例(CM448-**26A1*) . . . . . . . . . . . . . . . . . . . . . 12CM448的功能图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13通信和数据处理 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14可靠性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14可靠性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14维护性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15安全性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18输入 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19测量变量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19测量范围 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19输入类型 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19输入信号 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19无源数字量输入 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19电气参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19量程 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19标称输入电流 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19PFM 功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19测试电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19无源电流输入 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19量程 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19信号特征 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19内阻抗 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19测试电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19输出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20输出信号 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20报警信号 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21负载 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21线性化/传输特性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21无源数字量输出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21电气参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21PFM 功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21辅助电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21测试电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21有源电流输出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21量程 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21信号特征 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21电气参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21继电器输出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22电气参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22通信规范参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23HART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23PROFIBUS DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Modbus RS485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Modbus TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23工业以太网(EtherNet/IP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Web 服务器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24电源 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24供电电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24现场总线连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24功率消耗 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25保险丝 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25过电压保护 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25电缆入口 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25电缆规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25电气连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26其他模块的连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28保护性接地连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29传感器连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30性能参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32响应时间 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32参考温度 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32传感器输入的最大测量误差 . . . . . . . . . . . . . . . . . . . . . . . . . . 32电流输入和输出的测量误差 . . . . . . . . . . . . . . . . . . . . . . . . . . 32数字量输入和输出的测量误差 . . . . . . . . . . . . . . . . . . . . . . . . 32电流输入和电流输出的分辨率 . . . . . . . . . . . . . . . . . . . . . . . . 32重复性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32安装条件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33安装指南 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34环境条件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35环境温度范围 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35储存温度 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36湿度 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36防护等级 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36抗振性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36电磁兼容性(EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36电气安全 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36污染等级 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37环境压力补偿 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Liquiline CM442/CM444/CM448机械结构. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37外形尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37重量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37材料 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37可操作性. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38显示 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38操作方法 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38现场操作 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38远程操作 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39显示语言 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41证书和认证. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41CE认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41cCSAus认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41FM/CSA认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41MCERTS认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41订购信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42产品选型表 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42供货清单 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42附件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43防护罩 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43柱式安装套件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43测量电缆 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43传感器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43附加功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47软件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49其他附件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493Endress+HauserLiquiline CM442/CM444/CM4484Endress+Hauser功能与系统设计测量系统以下为测量系统的设计选型和安装示例。
CSQ-3
Denmark E-mail:List of contents1. Warnings, legal information and notes to CE-marking and UL approval (3)2. Application and functionality summary (3)3. Operation of display, push-buttons and LEDs (6)3.1 LEDs (7)3.2 Settings (8)4. Terminal list (10)4.1 Overview of the terminals (10)5. Wiring diagrams (11)5.1 AC input connections (11)5.1.1 Connection diagram (11)6. Commissioning (12)7. Technical data (12)8. Dimensions (14)9. Order specifications (14)Example of an order specification for the CSQ-3 (14)Appendix 1: Setting and parameters for synchronising (15)Settings (15)Guidelines for setting of the CSQ-3 (17)Visual representation of the parameters (17)Page 2 of 20 Tel.: (+45) 9614 9614 • Fax: (+45) 9614 9615 • E-mail: deif@User manual, Check synchroscope CSQ-34189340263B (UK)1. Warnings, legal information and notes to CE-marking and UL approvalThis manual gives general guidelines on how to install and operate the CSQ-3. Installing and operating the CSQ-3 implies work with dangerous currents and voltages. Therefore this should only be done by qualified personnel. DEIF A/S takes no responsibility for operation or installation. If there is any doubt about how to install or operate the system on which the CSQ-3 is measuring, the company responsible for the installation or the operation must be contacted.The CSQ-3 is CE-marked with respect to the EMC directive for residential, commercial and light industry plus industrial environment. This covers all environment types where the CSQ-3 can normally be used.The CSQ-3 is CE-marked with respect to the low-voltage directive for up to 600V phase to ground voltage, installation category (overvoltage category) III and pollution degree 2.The CSQ-3 is approved by UL. Please refer to the section “Technical data” for installation information as required by the UL.The package contains the following items:• Check synchroscope CSQ-3 unit • User manual • Two fixing clamps • A plugable connection (mounted on the unit) • Cable for system status output (only marine version)2. Application and functionality summaryThe CSQ-3 check synchroscope is a microprocessor-based synchronising unit providing measurement of all relevant values for synchronising a generator to a net (busbar). It is used in any kind of installation where manual or semi-automatic synchronising is required.In the CSQ-3 there is a possibility of adjusting the following synchronising requirements: The voltage difference between GEN and BB, the size of the phase window and the length of the synchronising pulse.In addition to that there is an indication of ‘U GEN TOO HIGH’ or ‘U GEN TOO LOW’ (red LEDs), phase difference within the preset window ‘ϕOK’ (yellow LED), and finally synchronising output active, ‘SYNC.’ (green LED).Display/readingThe unit measures the two inputs voltages: Generator (GEN) and busbar (BB), respectively. The phase difference from GEN’s zero-crossing to BB’s zero-crossing is calculated by the processor and is shown on the LED circle, consisting of 36 red LEDs.The red LEDs are only lit one at a time and its position indicates the phase difference between GEN and BB. The lit LED simulates the pointer tip of an analogue pointer instrument. If the LED is lit in the 12 o’clock position, the phase difference is 0 degrees. In the 6 o’clock position, 180 degrees etc. With 36 LEDs the resolution is 10 degrees.The movement of the lit LED’s position indicates the frequency difference between GEN and BB. If the indication is turning clockwise (too fast), the GEN frequency is too high in proportion to the BB frequency. If the indication is turning counter-clockwise, the proportion is inversed. The rate of the motion tells about the frequency difference. The faster the rotation, the bigger the frequency difference, e.g. 1 rotation per second = 1Hz. If the BB frequency is 50Hz and the rotation turns right, the GEN frequency will be 51Hz in this example.If the frequency difference between GEN and BB is becoming too big (>3Hz), the circular motion stops and a LED will be lit at the ‘too fast’ or ‘too slow’ mark, dependent on which direction the GEN frequency has to be adjusted to.Normal synchronisingThe unit automatically calculates the synchronising parameters to check if there is the required space for the synchronising inside the preset phase window. These calculations compare the frequency difference with t R and the size of the phase window. When t R is set to ∞, t d can be set by the user and is then included in the calculations instead of t R.If the ∆ϕ window is set symmetrically, both underfrequency synchronising and over-frequency synchronising is possible.Under- or overfrequency synchronisingWhen the ∆ϕ window is set asymmetrically the following functionality is possible:the∆ϕ window is set asymmetrically with a higher positive than negative ∆ϕ Ifvalue, only synchronising with the generator input at lower frequency than the busbar input is possible (underfrequency synchronising).the∆ϕ window is set asymmetrically with a lower positive than negative ∆ϕ Ifvalue, only synchronising with the generator input at higher frequency than the busbar input is possible (overfrequency synchronising).Note:This function is not active with t R set to ∞.Page 4 of 20 Tel.: (+45) 9614 9614 • Fax: (+45) 9614 9615 • E-mail: deif@User manual, Check synchroscope CSQ-34189340263B (UK)Dead bus synchronisingWhen the dead bus function is set, the synchronising relay will be activated and the green LED (SYNC) will be lit, when the busbar voltage is below the dead busbar preset level and the GEN voltage exceeds 80% of nominal value.Power up resetThe unit will operate when the GEN voltage exceeds 80% of the nominal value. Below this level no functionality is obtained.µP supervision output Due to the demands from the classification societies (GL) a special optocoupler output has been added on the marine version.From this output it is possible to supervise the internal microprocessor (µP).If an error is present, the output changes state from a low to a high impedance (open collector output).The CSQ-3 can be operated in two different modes: ‘Normal mode’ and ‘setting mode’. Normal mode is used to display measuring values, and setting mode is used to view the settings or change them to the desired functionality.Page 6 of 20 Tel.: (+45) 9614 9614 • Fax: (+45) 9614 9615 • E-mail: deif@User manual, Check synchroscope CSQ-34189340263B (UK)3.1 LEDsThe CSQ-3 has the following LEDs on the fronts showing different operating information.LEDs on primary front (normal mode):LEDColour FunctionCircle Red The lit LED in the circle shows the phase difference betweenGEN and BUSBARSYNC. Green All preset sync. parameters are OK, and the output relay isactivatedϕ OK Yellow The phase difference between GEN and BUSBAR is within the preset windowU GEN TOO HIGHRed The voltage difference between GEN and BUSBAR isoutside the preset range. U GEN is too high U GEN TOO LOWRed The voltage difference between GEN and BUSBAR isoutside the preset range. U GEN is too lowLEDs on secondary front (setting mode):LEDColour FunctionCircle Red Parts of the circle are used as scales for the different settings∆ϕYellow Shows that the ∆ϕ scale is active t d Yellow Shows that the t d scale is active.Please notice that t d only becomes active with t R set to ∞ t RYellow Shows that the t R scale is active∆UYellow Shows that the ∆U scale is active U busYellow Shows that the U bus scale (dead bus) is activeFor further information about the settings, please see appendix 1.3.2 SettingsPage 8 of 20 Tel.: (+45) 9614 9614 • Fax: (+45) 9614 9615 • E-mail: deif@User manual, Check synchroscope CSQ-34189340263B (UK)OperationThe operation occurs via the secondary foil accessible when the primary foil/front frame is removed. The operation occurs by means of 3 push-buttons: Mode (toggle), up arrow (▲) and down arrow (▼).Control of settingsThe mode button is held down for about 2-3 seconds to obtain the setting mode. This is confirmed by the fact that the LED is lit at the ∆U scale and that the setting of the ∆U max. parameter can be read on the matching scale. With ▲ and ▼ the setting can be changed.For every subsequent push on the mode button, a change to the next parameter occurs. These can be read and changed in a corresponding way. When mode is pushed after the last parameter, one returns to normal mode.When leaving the last setting menu, the LED circle ‘rotates’ to indicate that the current setting has been automatically saved.Please notice that the preset window, ∆U and ∆ϕ, is divided into two separate settings, making asymmetrical setting of this parameter possible.Also please notice that if the settings are changed unintentionally, these are saved when the setting mode is left.Change of ∆ϕ rangeThe normal range of ∆ϕ is -20°...-5° and 5°...20° in 1° steps.This can be changed to -40°...-10° and 10°...40° in 2° steps.Step down to the 20° point with the down arrow button. While pressing the down arrow button, press the up arrow button and the scale will change from normal range to the scale 2 x normal range. Press the up arrow button to return to normal range. While pressing the up arrow button, press the down arrow button, and the scale will change from 2 x normal range to normal range. Please notice that the 2 x normal range mode is indicated on the LED circle by activation of 2 LEDs each time ∆ϕ is changed. Factory settingsWhen the product is delivered from the factory, the following basic settings will be set: ∆U: 5% of ±U BBt R : 0.5 sec.∆ϕ: ±10°Dead bus: OFFRestorage of factory settingsActivate the two arrow buttons simultaneously. While doing this hold down the mode button for approximately 5 seconds. Then the LED circle will light up and rotate to indicate that the factory settings have been restored.4. Terminal list4.1 Overview of the terminalsPage 10 of 20 Tel.: (+45) 9614 9614 Fax: (+45) 9614 9615 • E-mail: deif@6. CommissioningBefore commissioning: Check phases for correct voltage and correct phasesequence.Warning:Incorrect voltage may lead to malfunction anddamage of the unit.7. Technical data±2° (electrical degrees)Accuracy:Resolution: 10° (36 LEDs)Settings, range: ∆ϕ: ±5…20° in 1° steps or±10…40° in 2° steps∆U: ±1…10% in 1% stepst R : 0…1 sec. in 0.1 sec. steps or ∞t d : 0…1 sec. in 0.1 sec. stepsU bus offset: Off or 4 levels of noise suppressionbus)(deadMax. frequency difference: No limitInput range (U N): 100…127V AC (115V AC) or220…240V AC (230V AC) or380…415V AC (415V AC) or440…480V AC (450V AC)Busbar input: Load: 2kΩ/VGenerator input: (Max. 2VA). Also supply for the unitMax. input voltage: 1.2 x U N, continuouslyAbove 450V: 1.1 x U N, continuously2 x U N for 10 sec.Frequency range: 40…70Hz (supply)Relay contact: 1 SPST-NO-contactRelay contact ratings: Resistive loads: AC1: 8A, 250V AC(Gold plate silver alloy) DC1: 8A, 24V DCInductive loads: AC15: 3A, 250V ACDC13: 3A, 24V DCMechanical life: 2 x 107Electrical life: 1 x 105 (nominal value)Optocoupler output: System status off = failure NpN optocoupler output Max. 40V, 10mA 2 wires AWG 20 (red/black) 30 mm length (Only in marine version)Temperature:-10…55°C (nominal)-25…70°C (operating) -40…70°C (storage)Temperature drift: Set points:Max. 0.2% of full scale per 10°CGalvanic separation:According to EN/IEC61010-1All input/output groups to ground: 3.75kV Between all input/output groups: 3.75kV Test conditions: 50Hz, 1 min.Climate:HSE, to DIN40040EMC:CE-marked according to EN50081-1/2, EN50082-1/2 and IEC255-3Connections: Max. 2.5 mm 2(single-stranded)Max. 1.5 mm 2(multi-stranded)Materials:All plastic parts are self-extinguishing to UL94 (V0)Protection:Front: IP52. Terminals: IP20According to IEC529 and EN60529Type approval: For current approvals please see (Only valid for marine version)UL approval: UL508, E230690T max 50°C, pollution degree 3, type 1 Wire: 24-12 AWG, use 60/75°C wire Terminal screw torque: 4.4-5.3 lb-in.CAUTION: Risk of electrical shock. More than one disconnect switch may be required to de-energize equipment before servicingDimensions:Please see drawing in section 8 Panel cut-out: 91 x 91 ±1 mmWeight:< 0.40 kgAppendix 1: Setting and parameters for synchronisingSettings∆UHere the allowed relative voltage difference between GEN and busbar is adjusted. The regulating range is ±1…10% in steps of 1%. The adjustment is made individually for ∆U MIN and ∆U MAX, so asymmetrical adjustment is possible. The setting is done according to the following formula:(U GEN – U BUSBAR) x 100∆U MIN, ∆U MAX =U BUSBARIf the preset value is exceeded, one of the two U GEN LEDs will emit red light, and synchronising is not possible.If the generator voltage is too low, the U GEN too low LED will be lit.If the generator voltage is too high, the U GEN too high LED will be lit.If both the U GEN LEDs are lit simultaneously, there is an overvoltage error on the input. In this case, disconnect the unit and check the applied voltage level!∆ϕHere the phase window is adjusted, in which synchronising can take place. The adjustment starts from ±5° and the window can open symmetrically or asymmetrically around this value.The regulating range is -20°...-5° and 5°...20°, in 1° steps or-40°...-10° and 10°...40°, in 2° steps.t RHere the length of the pulse for the synchronising relay is adjusted.The regulating range is 0...1 sec. in steps of 0.1 sec. or ∞.This function makes it possible to adjust the synchronising pulse according to the external breakers demands (closing time).For special purposes it is also possible to adjust t R to ∞ (infinite). This setting will (after t d has expired) provide a synchronising pulse as long as the following conditions are met:•Phase is inside the phase window•Voltage > 70% of U NOMINALt dHere the time is adjusted, in which the phase difference must be inside the preset synchronising window to allow SYNC. The regulating range is 0...1 sec. in steps of 0.1 sec.Dead busThe possibility of closing the circuit breaker even though the busbar voltage is missing. There is an extra adjustment, U BUS, where the level of dead busbar can be set. This facility makes dead bus synchronising possible, even though there is noise on the busbar. The regulating range is off or 10...40% of U N in steps of 10%.Setting Dead bus function U BUSOFF Deactivated10 Activated within the range 15-25% of actual generator voltage > 70%20 Activated within the range 25-30% of actual generator voltage > 70%30 Activated within the range 30-40% of actual generator voltage > 70%40 Activated within the range 40-50% of actual generator voltage > 70% Please notice that this setting is a coarse step regulation for suppression of possible noise on the busbar. The scale 10-20-30-40 should therefore be considered more as a 4 level noise suppression than as an accurate measuring setting.Guidelines for setting of the CSQ-3CommissioningNormally t R is adjusted so it equals the circuit breakers closing time and ∆ϕ-/∆ϕ+ to max. allowed synchronising error.Please notice that the CSQ-3 calculates space for t R (breaker closing time) within the chosen ∆ϕ window at the actual ∆f (slip frequency). Therefore the max. synchronising error will never exceed the chosen ∆ϕ window.Calculation exampleThe breaker closing time is 200mS, and t R is chosen to 200mS. The phase window is set symmetrically to ±10° (electrical degrees). Then the max. ∆f can be calculated using the following formula:Synchronising relay pulse will not be emitted if ∆f exceeds 0.278Hz. (∆ϕ-) + (∆ϕ+)∆f = 360 x t R 10 + 10 ∆f = = 0.278Hz 360 x 0.2Calculation of the actual synchronising error – not to be mistaken for the max. synchronising error which is solely determined by the chosen ∆ϕ windowThe next examples apply to situations where t R is set in the range 0.1...1 sec. Example:With a slip frequency (∆f) of 0.1Hz the phase changes with a rate of 36°/sec. If ∆ϕ is set to ±10° and t R is set to 0.2 sec. = breaker closing time, the actual synchronising error can be calculated.The moment the phase is within the set phase window (∆ϕ) the relay of the CSQ-3 is activated on condition that there is space for the chosen t R, in this case 0.2 sec. If ∆f is too big it will cause lack of space for the chosen t R time within the chosen ∆ϕ window. Example 1:With a phase change of 36°/sec. the phase will change 7.2° during the 0.2 sec. This means that we can now calculate the phase displacement at the exact moment when the breaker closes. ∆ϕ is set to -10° and +10°. The CSQ-3 relay will be activated -10° before top (12 o’clock position), and after 7.2° the breaker closes which means that the breaker closes 10° - 7.2° = 2.8° before top, that is an actual synchronising error of -2.8°. Applying the formula on page 17 the max. ∆f with the shown settings can be calculated to be 0.277Hz.Example 2:If we assume that the slip frequency in the actual case is 0.2Hz the phase changes with a rate of 72°/sec. With a phase change of 72°/sec. the phase will change 14.4° during the 0.2 sec. which gives a synchronising error of 10° - 14.4° = -4.4°. The negative result means that the breaker closed 4.4° after top, that is an actual synchronising error of +4.4°.Example 3:The same as examples 1 and 2 but with a slip frequency of 0.3Hz = 108°/sec. At t R = 0.2 sec. the phase will change 21.6°. As the ∆ϕ window is set to ±10°, the CSQ-3 will calculate that there is no longer space for a t R pulse of 0.2 sec. and therefore no relay pulse is emitted.General formula for the above-mentioned:Actual synchronising error = (∆ϕ-) - 360 x ∆f x breaker closing time (t R).Alternatively at negative slip frequency:Actual synchronising error = (∆ϕ+) - 360 x ∆f x breaker closing time (t R).If the result is negative the synchronising will take place after top (0°) provided that there is space for t R within the ∆ϕ window.If you want to avoid synchronising after top, ∆ϕ is set asymmetrically. At positive slip frequency (∆f) as in the shown example a setting of ∆ϕ- to -10° and ∆ϕ+ to +5° would have as a result that synchronising after top of more than 5° would not be possible.The length of the relay pulse t R can never be set to a lower value than the breakerclosing time, whereas t R can be set to a higher value if you want the max. slip frequency (∆f) to be lower to limit the rush of current of the breaker (the generators) inconnection with the synchronising.Example:In the light of the above-mentioned examples t R is changed to 0.4 sec. With a slip frequency (∆f) of 0.1Hz = 36°/sec. and t R = 0.4 sec. the phase changes 14.4° during the 0.4 sec. If ∆ϕ is set to ±10° the CSQ-3 will calculate that there is space for t R. Withthis setting the synchronising error will be identical with the synchronising error in example 1 (-2.8°) as the breaker closing time is the same (0.2 sec.). But the max. ∆fcan now only be 0.138Hz and not, as in example 1, 0.277Hz. The max. slip frequency (∆f) could also be controlled by setting ∆ϕ differently. If ∆ϕ was set to ±5° instead of ±10° the max. ∆f would be 0.138Hz at t R = 0.2 sec. With this setting and a ∆f of 0.1Hz the actual synchronising error will be +2.2°. Please notice that the breaker now closes2.2° after top and not, as in example 1, 2.8° before top. The choise of setting must bebased on the knowledge of the actual installation in which the CSQ-3 is applied. But the examples are to show that t R and ∆ϕ are inextricably connected and influence the same parameters, but with different results as to the calculation of the actual synchronising error.If t R is set to infinite (∞) the max. allowable ∆f can no longer be controlled by means of t R. When t R is set to infinite the setting of t d is automatically activated. Infinite t R is primarily used where the CSQ-3 is applied as supervision of an automatic synchronising system or in connection with closing of a tie breaker where you want to control frequency, phase and voltage to be within certain values before the breaker is closed.The setting of t d is to be calculated from ∆ϕ and the estimated max. allowable ∆f.(∆ϕ-) + (∆ϕ+)t d =360 x ∆fExample 1:∆ϕ is set to ±7°, and a max. ∆f of 0.05Hz at the moment of synchronising is estimated to be allowable.| -7 | +7t d =360 x 0.05t d = 0.77 sec. ~ 0.8 sec.Please notice that when t R is set to infinite (∞) the synchronising pulse (the relay contact of the CSQ-3) is interrupted the moment the phase is outside the set phase window. As the timer t d starts the moment the phase is within the set phase window ∆ϕ, and is to expire in the period the phase is still within the phase window before theof 0.049Hz the synchronising pulse would only be 18 msec. To avoid transmission of such a short synchronising pulse, the CSQ-3 performs a calculation based on ∆f and the actual phase window to make room for a synchronising pulse of at least 100 msec. Referring to example 1, 100 msec must be subtracted from the calculated t d to allow a max. ∆f of 0.05Hz.Function in particular situations:In connection with test “on desk” the CSQ-3 is normally connected to the same supply point so that frequency and phase are completely identical on the generator input and the busbar input. At this test form the following must be noticed:The first time the CSQ-3 is connected, synchronising pulse is emitted whether the ∆ϕwindow is set symmetrically or asymmetrically. If only the busbar input is interrupted subsequently (the CSQ-3 is supplied with auxiliary voltage from the generator input), synchronising pulse is only emitted if the interruption has lead to the result that the ∆ϕwindow was left in connection with the interruption (occurs if the interruption results in a noise pulse).If ∆ϕ is set asymmetrically so that only e.g. positive ∆f is accepted and ∆f changes sign (inverse direction) after the phase between generator and busbar is within the phase window, the synchronising pulse is not interrupted until the ∆ϕ window is left, even if ∆f has changed sign to negative ∆f.If ∆f is changed to correct direction of rotation after the phase is within the phase window the CSQ-3 calculates if there is space for t R (the synchronising pulse), and in that case synchronising pulse is emitted.Errors and changes excepted。
DS-19A08-BNG DS-19A08-BN网络报警小主机用户手册 V1.1介绍
产品型号
产品名称
DS-19A08-BN
网络报警小主机
DS-19A08-BNG
网络报警小主机
本手册可能包含技术上不准确的地方、或与产品功能及操作不相符的地方、或印刷错误。我公司将根 据产品功能的增强而更新本手册的内容，并将定期改进或更新本手册中描述的产品或程序。更新的内容将 会在本手册的新版本中加入，恕不另行通知。
杭州海康威视数字技术股份有限公司| 版权所有（C） --5--
DS-19A08-BNG网络报警小主机接线图
网络报警小主机.用户手册
电源指示灯
网络数据指示灯 网络状态指示灯
TIP RING TIP1 RING1
电话线
电源指示灯
电话机
电话机
电话线
注意 请勿对主机带电操作！
GPRS 天线座 工作状态指示灯 网络状态指示灯 电源指示灯
如下所示，预防措施分为“警告”和“注意”两部分： 警告：无视警告事项，可能会导致死亡或严重伤害。 注意：无视注意事项，可能会导致伤害或财产损失。
警告 事项提醒用户防范潜在的死亡或严重 伤害危险。
注意 事项提醒用户防范潜在的伤害或财产 损失危险。
警告 在本产品安装使用中，必须严格遵守国家和使用地区的各项电气安全规程。 在接线、拆装等操作时请一定要将电源断开，切勿带电操作。 如果设备工作不正常，请联系购买设备的商店或最近的服务中心，不要以任何方式拆卸或修改设备。
Z1 Z2
Z3 Z4
Z5 Z6
所有的EOL都是8.2K欧姆
Z7 Z8
警灯
警灯
警灯
报警输出接口
警灯
注意：
1、检修前要先断开所有交流电、电池和电话接头。 2、请确保主机接地端子可靠接地！主机内部具有多重防 雷保护设计，但这需要可靠接地为前提，否则这些防护措施 不能起到有效保护作用。接地电阻不大于8欧姆。
商用密码产品名单
58
SZD12
智能密码钥匙
深圳市明华澳汉科技股份有限公司
2001-12-19
国密证第 0095 号
59
SJR01
PC 信息保密软件
上海格尔软件股份有限公司
2001-12-19
国密证第 0096 号
60
SJW20
网络密码机
沈阳东软软件股份有限公司
2001-12-24
国密证第 0097 号
61
SIC04
武汉天喻信息产业股份有限公司
2002-10-24
国密证第 0124 号
78
SJW46
VPN 密码机
武汉三江航天网络通信有限公司
2002-10-24
国密证第 0125 号
79
SIC08-A 智能 IC 卡
武汉天喻信息产业股份有限公司
2002-10-24
国密证第 0126 号
80
SIC08-B 智能 IC 卡
55
SJY39
服务器密码机
北京紫光顺风信息技术有限公司
2001-10-22
国密证第 0087 号
56
SJW29
网络密码卡
深圳市中兴集成电路设计有限责任公司
2001-12-06
国密证第 0090 号
57
SQY01
企业银行安全子系统
成都卫士通信息产业股份有限公司
2001-12-19
国密证第 0094 号
无锡江南信息安全工程技术中心
2001-02-01
国密证第 0064 号
40
SJY15
加密读卡器
无锡江南信息安全工程技术中心
2001-02-01
国密证第 0065 号
E+E Elektronik EE33 说明书
MANUALHardware and SoftwareSeries EE33HUMIDITY/TEMPERATURETRANSMITTERBA_EE33_e // v14 // technical data are subject to change // 193359TABLE OF CONTENTS1. GENERAL 4 1.1 Symbol assertion 4 1.2 Safety instructions 4 1.3 Environmental information 42. PRODUCT DESCRIPTION5 2.1 Operating modes and conditions5 2.2 Survey: Model / Environmental Condition / Operating mode6 2.3 Product features EE3363. MOUNTING / INSTALLATION 7 3.1 Model C (remote sensing probe up to 120°C (248°F)) 7 3.2 Model D (remote sensing probe) 8 3.3 Model E (remote sensing probe, pressure tight up to 20bar (300psi)) 9 3.4 Model I (remote sensing probe, pressure tight up to 100bar (1450psi)) 10 3.5 Model J (2 remote sensing probes, pressure tight up to 20bar (300psi)) 11 3.6 Model K (remote sensing probe, pressure tight up to 20bar (300psi)) 124. ELECTRICAL CONNECTIONS 13 4.1 Connection diagram 13 4.2 Connection diagram alarm module (option) 13 4.3 Connection configuration of bottom part of the housing with plug connections 8...35V DC; 12...30V AC (option C03/C07/C08) 13 4.4 Connection configuration of bottom part of the housing with integrated power supply 100...240V AC (option V01) 134.5 Connection configuration of connectable sensing probe (option P03) 145. OPERATING COMPONENTS 145.1 Circuit board 14 5.2 Display module (option)156. OPTIONAL MODULES (alarm module, integrated power supply, ethernet module, ARC-Module) 167. HUMIDITY/TEMPERATURE CALIBRATION 18 7.1 2-point humidity calibration 18 7.2 2-point temperature calibration 19 7.3 1-point humidity calibration 21 7.4 1-point temperature calibration 22 7.5 Resetting to factory calibration 23 7.6 Adjustment/Calibration EE33 model J with HUMOR 20 248. MAINTENANCE25 8.1 Sensor cleaning25 8.2 Automatic ReCover (ARC) 25 8.3 Fuse replacement258.4 Self-diagnosis and error messages269. NETWORK 27 9.1 RS485 network (option) 27 9.2 Ethernet - module (option)2910. SCOPE OF SUPPLY 3311. REPLACEMENT PARTS / ACCESSORIES 3312. TECHNICAL DATA341. GENERAL INFORMATION 372. INSTALLATION 373. ICONS ON THE TOOLS BAR 38 3.1 File38 3.2 Interface 38 3.3 Group39 3.4 Transmitter 393.5 Information ?404. ICON LIST 415. INDEX - INDEX CARDS 41 5.1 Analogue 41 5.2 Relay42 5.3 Sensor / Probe replacement 43 5.4 Calibration 43 5.5 Parameter 45 5.6 Information476. OVERVIEW47 6.1 How to set-up a new transmitter?47 6.2 How to read the configuration of a transmitter? 476.3 How to save the configuration in a transmitter?47HARDWARECONFIGURATIONSOFTWARE1. GENERAL5Hardware2. PRODUCT DESCRIPTION2.1 Operating modes and conditions 2.1.1Automatic ReCover (ARC)Thanks to the combination of the heated measurement cell with a new high-pressureprobe, the transmitter can be used in applications with high process pressure and wide working range in humidity and temperature.The special high-pressure probe's innovative pressure tight feed through sets it apart from the remote probes in other models.Special ball valves enable assembly without interrupting the process and are available on request.2.1.3 High process pressure up to 100 bar (1450psi) / high-pressure probe (HPP = High Pressure Probe)7Hardware3. MOUNTING / INSTALLATIONDRILLING / MOUNTING TEMPLATE:Hardware810HardwareHardware124.2 Alarm module connection diagram (option)Rel 1Rel 24.3 Connection configuration of bottom part of the housing with plug connections / 8...35V DC; 12...30V AC (option C03/C06/C07/C08)5.1Circuit boardAfter removal the housing cover, the following operating components on the circuit board may be accessed.5.OPERATING COMPONENTS4.5 Connection configuration of connectable sensing probe (option P03)i e l d i n gl u er e yl a c kr o w n(0.25”) l o w /g r e e n )/g r e e n )15Hardware5.2 Display module (Option)4. MIN / MAX FUNCTION:The MIN / MAX function saves and displays the highest and lowest measured value since the last reset resp. the last interruption of the supply voltage.5. MEASURED VALUES / MAX. MEASUREMENT RANGE:6. STATUS LINE:MIN; MAX: see Point "MIN/MAX Function", see Hardware, chapter 5.2 “Display module”CALIB LOW; CALIB HIGH: indicates the low or high humidity/temperature calibration point.REL1 / REL2: status relay 1/ relay 2"ERROR 01....06": see Hardware, chapter 8.4 “Self-diagnosis and error messages”6. OPTIONAL MODULESThe optional modules are mounted in the lower part, that's why always only one optional module can be selected.17HardwareThe additional printed circuit board located in the lower part of the housing offers the possibiliy to start the ARC heating function with external signal.During the heating process the orange LED D3 flashes at the main printed circuit board. At the ARC-Module the red LED "heating" flashes and the relay contact (terminal "output") is closed.General information of the ARC function see Hardware, chapter 2.1.1 Automatic ReCover (ARC).For changes of the parameter of the heating process, see Software, chapter 5.5 Parameter.6.2 Integrated Power Supply (Option)see Hardware, chapter 4.4 Connection configuration of bottom part of the housing with integrated power supply 100...240V AC (option V01)6.3 Ethernet Module (Option)see Hardware, chapter 9.2 Ethernet - Module (Option)6.4 ARC-Module (Option)6.4.1 Connection / Operating elementsTerminal …+Ub“:supply voltage: 24V AC/DC +/-20%1 GND 2 +UbTerminal …Input“:1 GND2 signal (24V DC; 10mA)Terminal …Output“:1 REL_com 2 Rel_NOFeedback signal to the external control.The relay contact is closed during the heating process, otherwise opened.Operating elements:- LED green: LED flashes = supply voltage is switched on - LED red:LED flashes = heating process is activeTiming of switching status7. HUMIDITY / TEMPERATURE CALIBRATION2-point humidity calibration procedure on the circuit board:19Hardwarelow calibration point:2-point temperature calibration procedure on the circuit board:“CALIB LOW”HardwareHardware“CALIB HIGH”“CALIB LOW”HardwareHardwareHardwareIf the green LED on the PCB is not flashing with the supplyvoltage switched on, check the fuse and replace if required.Fuse secondary:250mA / T UL248-14Nominal voltage:250V Replacement types:Series: MSTU 250Manufacturer: Schurter Order No.: 0034.7109 Series: 374 Manufacturer: Littelfuse Order No.: 374 0250It is easy to clean the sensor if there are particle deposits (e.g. dust) on the surface of the heated measurement cell.Commercially available isopropyl alcohol is used for cleaning. Unscrew the filter cap and submerge the sensor element in the alcohol for 2 minutes.Allow the sensor element to dry or blow it dry with oil-free compressed air.Caution: In order to avoid destroying the active sensor coating, avoid using mechanical aids (e.g. cotton swabs or cloths) for cleaning!8. MAINTENANCE8.1 Sensor cleaning8.3 Fuse replacement for option V01When capacitive humidity sensors are exposed to chemical pollution (e.g. detergent residue), the presence of foreign molecules can distort the measurement reading.The foreign molecules can be evaporated by heating the measurement cell briefly and intensively. Reconditioning helps to minimize distorted measurement readings during the calibration interval.It is recommended to heat the measurement cell by choosing Manual after the cleaning or sterilization process or if distorted measurement readings are suspected.To start heating, remove the housing cover and press the pushbutton S3 or trigger the ARC-module with the external signal (see Hardware, chapter 6.4 ARC-Module).The orange LED D3 is illuminated during heating.8.2 Automatic ReCover (ARC)8.4 Self diagnosis and error messagesHardware9. NETWORK9.1RS485 Network (option)1) Note: to enable optimum expansion, both ends of the network must be terminated with a terminating resistorwith Ra 100 Ohm.* Siemens 6ES7 194-1KA01-0XA0HardwareHardware9.2 Ethernet - Module (Option)9.2.1 Electrical Connection / Operating ComponentsScrew Terminals: supply voltage: 8...35V DC / 12...30V AC 1 GND / ~ 2 V+ / ~Power - LED (Red): LED glowing = power supply onLNK (Link) - LED (Green):LED glowing = connection with Ethernet switch establishedACT (Active) - LED (Green):LED flashing = data transfer activeConnect the transmitter to the Ethernet-network using the provided Harting RJ Industrial IP67 Push Pull Connector and a standardized Ethernet Cat5-cable.Hook up the Ethernet module with the supply voltage (8...48VDC / 12...35VAC), Power - Choose mode of IP-address assignment (DHCP /STATIC) by jumper setting at the- Press reset-button for 3-5 seconds (LNK - LED temporary off).Ethernet module changes to DHCP - mode and requests an IP - address from the - Transmitter will be detected as soon as ComCenter is active.- Factory settings for the transmitters are the static IP - address 192.168.0.64 with the - Networking settings of the used personal computer might need to be changed in orderHardwareAttention:ComCenter needs to be active (running) as long as the virtual Com-Ports arein use!If the ComCenter window is minimized, it will be hidden in the "System Tray"(right bottom, next to the system time), but it remains active (running)!9.2.3.5 Communication without ComCenterTransmitters with an Ethernet module can also be used straight without theComCenter.Hardware11. REPLACEMENT PARTS / ACCESSORIESDescription- Filter- Sintered stainless steel filter- PTFE Filter- Metal grid filter- Display + housing cover in metal- Interface cable for PCB- Interface cable for plug option C06- Mounting flange 12mm (1/2”)- Mounting flange 6mm (1/4”)- 1/2” ISO screw connection 12mm (1/2”)- 1/2” ISO screw connection 6mm (1/4”)- 1/2” NPT screw connection 12mm (1/2”)- 1/2” NPT screw connection 6mm (1/4”)- M16x1.5 => 1/2” NPT adapter for conduit fittings - Drip water protection- 1% calibration- Calibration set- RS485 Kit (HW + SW) for networking- Datalogging and analysis software- Adapter M16x1.5 to NPT 1/2- Radiation shield for 12mm rH-probe- Radiation shield for 6mm T-probe- HUMOR 20 adapter for EE33 - model J Order code HA010103 HA010105 HA010106D05MHA010304 HA010311HA010201 HA010207HA011102 HA011104 HA011103 HA011105 HA011101HA010503EE90/3HHA0104xxHA010601HA010602HA011101HA010502 HA010506 HA02040110.SCOPE OF SUPPLYHardwareHardware12.TECHNICAL DATAMeasurement values Relative humidityHumidity sensor 1)heated, monolithic measurement cell HMC1 Working range 1)0...100% RHAccuracy *)(including hysteresis, non-linearity and repeatability, traceable to intern. standards, administrated by NIST , PTB, BEV ...) -15...40°C (5...104°F) ≤90% RH ± (1.3 + 0.3%*mv) % RH-15...40°C(5...104°F) >90% RH ± 2.3% RH -25...70°C (-13...158°F) ± (1.4 + 1%*mv) % RH -40...180°C (-40...356°F) ± (1.5 + 1.5%*mv) % RH Temperature dependence of electronics typ. ± 0.01% RH/°C (0.0055% RH/°F) Response time with metal grid filter at 20°C (68°F) / t 90 < 15s TemperatureTemperature sensor element monolithic measurement cell HMC1Working range sensing head EE33-MFTC: -40...120°C (-40...248°F) EE33-MFTD/E/I/J/K: -40...180°C (-40...356°Accuracy (typ.)Temperature dependence of electronics typ. ± 0.005°C/°CExternal temperature probe Pt1000 (DIN A)Outputs 2)Two freely selectable and scaleable analogue outputs 0 - 1V -1mA < I L < 1mA 0 - 5V -1mA < I L < 1mA 0 - 10V -1mA < I L < 1mA 4 - 20mA R L < 500 Ohm0 - 20mA R L < 500 OhmDigital interfaceRS232optional: RS485 or ethernetMax. adjustable measurement range 2)3)GeneralSupply voltage 8...35V DC 12...30V AC (optional 100...240V AC, 50/60Hz)4) Current consumption - 2x voltage output for 24V DC/AC: typ. 40mA / 80mA - 2x current output typ. 80mA / 160mA Pressure range for pressure tight probe EE33-MFTEx/Jx/Kx: 0.01...20bar (0.15...300psi) EE33-MFTIx: 0...100bar (0...1450psi) System requirements for software WINDOWS 2000 or later; serial interface Housing / protection class Al Si 9 Cu 3 / IP65; (Nema 4) Cable gland M16 x 1.5 cable Ø 4.5 - 10 mm (0.18 - 0.39”)Electrical connection screw terminals up to max. 1.5mm² (AWG 16)Working and storage temperature range of electronics -40...60°C (-40...140°F) Industrial Environment FCC Part15 ClassB1) Refer to the working range of the humidity sensor. 2) Can be easily changed by software. 3) Refer to accuracies of calculated values (page 140)4) Operating conditions of power supply V01: Overvoltage category II; Degree of pollution class 2; Installation altitude up to 2000m (6,562 ft.) above sea level *) T he accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy wascalculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement).∆°C°CfromtounitEE33-C EE33-D/E/I/J EE33-K Humidity RH 0100100/% rF TemperatureT -40 (-40) 120 (248)180 (356)/°C (°F)Dew point temperature Td -40 (-40) 100 (212)100 (212)100 (212)°C (°F)Frost point temperature Tf -40 (-40)0 (32)0 (32)0 (32)°C (°F)Wet bulb temperatureTw 0 (32)100 (212)100 (212)/°C (°F)Water vapour partial pressure e 0 (0)1100 (15)1100(15)/mbar (psi)Mixture ratior 0 (0)999 (9999)999 (9999)/g/kg (gr/lb)Absolute humidity dv 0 (0)700 (300)700 (300)/g/m3 (gr/f³)Specific enthalpyh0 (0)2800 (999999)2800 (999999)/kJ/kg (Btu/lb)HardwareConfigurations softwareSaves the current trees (networks) in an archive file.Selects the serial interface (COM port) for communication with the transmitters. Marked COM ports are greyed out and deactivated for the configuration software A disabled interface (shaded = do not use), can be enabled by clicking on theConfigurations softwareConfigurations softwareConfigurations softwareConfigurations softwareboth optional alarm outputs.Selects the physical quantity for each alarm output.Sets the high switching point.Sets the switching hysteresis that should be maintained each time the signal falls below the upper switching threshold.Ausschaltpunktswitching off Hysterese8%obere Schaltschwelleswitching onConfigurations software41Configurations software5.3 Sensor / Probe ReplacementThe possibility of a sensor / probe replacement is not implemented at thismoment in time.421-point calibration T emperature:Configurations software43Configurations software 4)Factory Calibration:44If a transmitter of the46Each measuring transmitter is assigned a unique network address at the f actoryfor precise identification within the network.Specifies the transmitter series.Provides information on the date of the last humidity calibration, but only where this was performed using the configuration software.Note: Manual calibration processes performed directly on the circuit board are not Provides information on the date of the last temperature calibration, but only where this was performed using the configuration software.Note: Manual calibration processes performed directly on the circuit board are not Used to track the manufacturing data of the transmitter.Provides information on the software version implemented in the transmitter (internal).6. OVERVIEW6.1 How to set-up a new transmitter?Menu "File" --> "New Workspace"Assign a name to the file and select the location to save the fileMenu "Group" --> "New Group"Assign and add a name, then click on "Finish"Menu " Transmitter" --> "New Transmitter" or Button "New Transmitter"Select the group for the transmitter using the pull-down menu "Group."If the transmitter is from the EE33 series and will belong to a transmitter network,then select the box "Network" and enter the network address assigned by E+E(can be found on the housing label) in the "Network Address" field.Specify the COM port (serial interface) of the PC / Notebook in the pull-downmenu "Interface".Enter the name for the transmitter in the "Name" field.Complete the "New Transmitter" process by clicking on the button "Add".6.2 How to read the configuration of a transmitter?The current configuration of the selected transmitter can be read byclicking on the button "Read Transmitter" or by selecting "Transmitter" --> "Read Transmitter."If the configuration is already loaded, the configuration data in the Index- indexcards can be modified or adapted.6.3 How to save the configuration in a transmitter?A modified configuration in the Index - index cards can be saved to theselected transmitter by clicking on the button "Save Transmitter" or by selecting "Transmitter"--> "Save Transmitter."47。
ICP-212S3 枪支说明书
H-UP調整：BB彈呈現一直線的彈道才是正確射法。
過於上飄：將撥片往後拉。
過於下墜：將撥片往前推。
H-up Adjustment: Make sure the trajectory of the BB pellets to be straight.When the BB pellet flies up: Push the H-UP lever backward to raise the trajectory.When the BB pellet falls down: Push the H-UP lever forward to lower the trajectory.5H-UP 彈道調整H-UP Adjustment3-2槍身結合3號齒輪箱正確位置圖The correct position of sector gear before reassembling3號齒在槍身結合時，必須轉到正確位置，才可將上槍身蓋下。
Make sure the sector gear is turned to the correct position before reassem-bling the receiver .The piston and gear may be damaged without correcting the position in advance.未進行歸位校正，會損壞活塞及齒輪3可動部的說明Movable Parts3-1槍機拉柄操作Charging Handle將槍機拉柄向後拉至底端(不可放開)Pull the charging handle back to theend of the groove.1按壓槍托調整壓板後，即可前後調整長度。
Press the Stock Adjustment Lever to adjust the length.1按壓貼塞調整鈕後，即可上下調整高度。
派克核电门户网站产品说明书
10 CFR 50 • AERB • ASME QME-1* • ASME QSC (NCA-3800) • ASME 第 III 部分 • ASME U核级认证核级认证 • ASN • CNSC CRN-N* HAF 604 • IAEA SC-QA 780 298* • IEEE* • ISO 9001: •E 派克核电门户网站无论您是要建新的发电厂，还是要改进现有电厂，派克都会依照行业统一的质量保证计划，使不同部门的各种产品进入核电市场，提高生产率和利润率。
这些产品包括安全专项和安全相关的核级子系统和组件，以及为非管制工厂区提供的优质的“成熟”商品。
派克门户网站是我们投入数百万美元用于核能研究和发展的承诺之一，是我们承诺提获得越来越多在全球供应且通过认证的核能产品的单一途径。
供行业所要求的高效性、可靠性和成本效益的体现。
我们支持单源购买各种产品系列，通过最新的订购方式提高工厂生产率和利润率。
另外，我们在将近 50 个国家拥有 50,000 名员工，因而门户网站产品在全球都有供应。
有关订购门户网站产品的更多信息，请：拨打电话 256 885 3833（销售）、256 885 3880（技术支持）或 发送电子邮件至 ipdusnuclear@parker .com派克核电门户网站是根据派克现行的 NQA- 1 和 10CFR50 附录 B 规定的质量保证计划开发的，并且采用了行业及规范性文件中规定的最佳实3 级阀门的 ASME N 核级认证外，派克核电门户网站上提供的产品符合 10CFR 第 21 部分中对基本组件的规定，按照认可的质保计划或是商品级物项执行。
专项不会提高质量，而是验证并记录专用项目中已有的的质量。
EU PED*HAF 604*IAEA SC-QA KTA 3507NNSANQA-1Parker Hannifin Ltd.Tachbrook Park DriveTachbrook Park,Warwick, CV34 6TU英国电话：+44 (0) 1926 317 878传真：+44 (0) 1926 317 855********************欧洲、中东和非洲AE – 阿联酋，迪拜电话：+971 4 8127100********************AT – 奥地利，维也纳新城电话：+43 (0)2622 23501-0*************************AT – 东欧，维也纳新城电话：+43 (0)2622 23501 900****************************AZ – 阿塞拜疆，巴库电话：+994 50 2233 458****************************BE/LU – 比利时，尼韦尔电话：+32 (0)67 280 900*************************BY – 白俄罗斯，明斯克电话：+375 17 209 9399*************************CH – 瑞士，埃托瓦电话：+41 (0)21 821 87 00*****************************CZ – 捷克共和国，Klecany电话：+420 284 083 111*******************************DE – 德国，卡尔斯特电话：+49 (0)2131 4016 0*************************DK – 丹麦，巴勒鲁普电话：+45 43 56 04 00*************************ES – 西班牙，马德里电话：+34 902 330 001***********************FI – 芬兰，万塔河电话：+358 (0)20 753 2500parker. ****************FR – 法国，Contamine s/Arve电话：+33 (0)4 50 25 80 25************************GR – 希腊，雅典电话：+30 210 933 6450************************HU – 匈牙利，布达佩斯电话：+36 23 885 470*************************IE – 爱尔兰，都柏林电话：+353 (0)1 466 6370*************************IT – 意大利，Corsico (MI)电话：+39 02 45 19 21***********************KZ – 哈萨克斯坦，阿拉木图电话：+7 7273 561 000****************************NL – 荷兰，奥尔登扎尔电话：+31 (0)541 585 000********************NO – 挪威，阿斯克尔电话：+47 66 75 34 00************************PL – 波兰，华沙电话：+48 (0)22 573 24 00************************PT – 葡萄牙，莱萨·达·帕尔梅拉电话：351 22 999 7360**************************RO – 罗马尼亚，布加勒斯特电话：+40 21 252 1382*************************RU – 俄罗斯，莫斯科电话：+7 495 645-2156************************SE – 瑞典，Spånga电话：+46 (0)8 59 79 50 00************************SK – 斯洛伐克，班斯卡·比斯特里察电话：+421 484 162 252**************************SL – 斯洛文尼亚，新梅斯托电话：+386 7 337 6650**************************TR – 土耳其，伊斯坦布尔电话：+90 216 4997081************************UA – 乌克兰，基辅电话：+380 44 494 2731*************************UK – 英国，沃里克电话：+44 (0)1926 317 878********************ZA – 南非，坎普顿公园电话：+27 (0)11 961 0700*****************************北美地区CA – 加拿大，安大略省米尔顿电话：+1 905 693 3000US – 美国，克利夫兰电话：+1 216 896 3000亚太地区AU – 澳大利亚，城堡山电话：+61 (0)2-9634 7777CN – 中国，上海电话：+86 21 2899 5000HK – 香港电话：+852 2428 8008IN – 印度，孟买电话：+91 22 6513 7081-85JP – 日本，东京电话：+81 (0)3 6408 3901KR – 韩国，首尔电话：+82 2 559 0400MY – 马来西亚，莎阿南电话：+60 3 7849 0800NZ – 新西兰，惠灵顿电话：+64 9 574 1744SG – 新加坡电话：+65 6887 6300TH – 泰国，曼谷电话：+662 186 7000-99TW – 台湾，台北电话：+886 2 2298 8987南美AR – 阿根廷，布宜诺斯艾利斯电话：+54 3327 44 4129BR – 巴西，圣若泽杜斯坎普电话：+55 800 727 5374CL – 智利，圣地亚哥电话：+56 2 623 1216MX – 墨西哥，阿波达卡电话：+52 81 8156 6000核电门户网站手册 M&K 12/10 1M派克授权的本地经销商© 2010 派克汉尼汾公司派克全球办事处联系信息欧洲产品信息中心免费电话：00 800 27 27 5374(AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE,IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE,SK, UK, ZA)– 一点的方式。
333U说明书(中文)
(3) 选择的单位必须与装置单位匹配，否则 Tri-Loop 将发出报警。确认仪表的单位分配。
罗斯蒙特和罗斯蒙特徽标是罗斯蒙特股份有限公司的注册商标。 Tri-Loop、 Multivariable （多变量）、 MV 和 Hot Backup （热备份）是罗斯蒙特股份有限公司的商标。 HART 是 HART 通讯基金会的注册商标。 所有其他标记归各自业主所有。 ©1996、 1997 罗斯蒙特股份有限公司版权所有。 罗斯蒙特 3095 MV 型多变量质量流量变送器受到下列一项或多项美国专利保护：4,370,890、 4,612,812、 4,791,352、 4,798,089、 4,818,994、 4,833,922、4,866,435、4,926,340、5,028,746，并受到墨西哥 154,961 号专利保护 。罗斯蒙特 3244MV 型智能温度变送器以及 HART Tri-Loop 受到一项或多项美国专利保护。其他美国专利和外国专利正在申请中。
满刻度 (20 mA) 值 ___________________________(2) _______________________________________________(2(3)
F 激活
F 禁用 +
F 第一变量
F 第二变量
F 第三变量
F 第四变量 +
零 (4 mA) 值 _________________________________(2)
易于组态和安装
利用 275/375 通讯器，可轻松对 333 HART Tri-Loop 进行组态和维护。AMS 设备管理配套软件和工程助手 软件 （5.0 或更高版本）可提供基于微机的简易用户 组态。利用三个 DIN 导轨安装选项以及便于灵活接地 的电气绝缘模拟输出通道，可实现快速轻松的安装。
研控科技 ESS257-R 系列 总线型集成式电机 硬件手册说明书
深圳市研控自动化科技有限公司目录前言 (1)1概述 (2)1.1产品介绍 (2)1.2特性 (2)1.3应用领域 (2)1.4产品命名规则 (2)2性能指标 (3)2.1电气特性 (3)2.2使用环境 (3)3安装 (4)3.1安装尺寸 (4)3.2安装方法 (4)4端口与接线 (5)4.1接线示意图 (5)4.2端口定义 (6)4.2.1状态指示灯 (6)4.2.2输入/输出端口 (6)4.2.3拨码开关 (6)4.2.4电源端口 (6)4.3输入/输出端口操作 (7)4.4拨码开关设定 (8)4.4.1终端电阻设定 (8)4.4.2地址设定 (8)5 电机规格及接线 (10)5.1技术规格 (10)6报警排除 (11)7版本修订历史 (12)8保修及售后服务 (13)8.1保修 (13)8.2售后服务 (13)前言感谢您使用本公司总线型集成式电机。
在使用本产品前，请务必仔细阅读本手册，了解必要的安全信息、注意事项以及操作方法等。
错误的操作可能引发极其严重的后果。
声明本产品的设计和制造不具备保护人身安全免受机械系统威胁的能力，请用户在机械系统设计和制造过程中考虑安全防护措施，防止因不当的操作或产品异常造成事故。
由于产品的改进，手册内容可能变更，恕不另行通知。
用户对产品的任何改装我公司将不承担任何责任。
阅读时，请注意手册中的以下标示：本用户手册所述内容仅适用于以下机型:1概述1.1产品介绍ESS257-R系列总线型集成式电机采用新一代32位DSP控制技术和功角控制技术，支持标准MODBUS-RTU协议，最高转速可达3000rmp以上，且高速力矩衰减远低于普通开环驱动器，可大幅提升步进电机的高速性能和力矩使用率，有效降低电机发热和振动，从而提升机器的加工效率和精度。
采用基于负载的电流控制技术，可有效降低电机发热，延长电机使用寿命。
驱动器内置的报警输出信号，方便上位机进行监测和控制。
位置超差报警功能保证了加工设备的安全运行。
赛米控丹佛斯 SEMITRANS 3 IGBT模块 SKM600GB12E4D1 数据表
Absolute Maximum Ratings Symbol Conditions Values UnitIGBTV CES T j = 25 °C 1200 V I C T j = 175 °CT c = 25 °C 860 A T c = 80 °C702 A I Cnom 600 A I CRM1800 A V GES -20 (20)V t psc V CC = 800 V V GE ≤ 15 V V CES ≤ 1200 VT j = 150 °C10 μs T j-40 (175)°C Inverse diodeV RRM T j = 25 °C1200V I F Continuous DC forward current 600A I FRM 1200A I FSM 10 ms, sin 180°, T j = 25 °C2736A T j-40 ... 175°C Module I t(RMS)500 A T stg module without TIM-40 ... 125 °C V isolAC sinus 50 Hz, t = 1 min4000VCharacteristics Symbol Conditions min. typ. max. UnitIGBTV CE(sat)I C = 600 A V GE = 15 V chiplevel T j = 25 °C 1.80 2.05 V T j = 150 °C 2.05 2.42 V V CE0chiplevel T j = 25 °C 0.80 0.90 V T j = 150 °C 0.75 0.80 V r CE V GE = 15 V chiplevelT j = 25 °C 1.67 1.92 mΩ T j = 150 °C2.2 2.7 mΩ V GE(th)V GE = V CE , I C = 24 mA55.86.5 V I CES V GE = 0 V, V CE = 1200 V, T j = 25 °C5mA C ies V CE = 25 V V GE = 0 Vf = 1 MHz37.2 nF C oes f = 1 MHz 2.32 nF C res f = 1 MHz2.04 nF Q G V GE = - 8V ... + 15 V 3400 nC R Gint T j = 25 °C 1.3 Ω t d(on)V CC = 600 V I C = 600 AV GE =+15/-15V R Gon = 1.8 Ω R Goff = 1.2 Ωdi/dt on = 8050 A/µs di/dt off = 4100 A/µs dv/dt = 3500 V/µs L s = 25 nH T j = 150 °C 175 ns t r T j = 150 °C 75 ns E on T j = 150 °C 55 mJ t d(off)T j = 150 °C 530 ns t f T j = 150 °C 120 ns E off T j = 150 °C80mJ R th(j-c)per IGBT0.049K/W R th(c-s)per IGBT, (λgrease = 0.81 W/(m*K))0.032K/WIGBT4 ModulesSKM600GB12E4D1Features*∙IGBT4 = 4th generation medium fast trench IGBT (Infineon)∙ CAL4HD = 4th generation high density (HD) CAL-diode optimized for low static losses∙ Insulated copper baseplate using DBC technology (Direct Bonded Copper)∙ Increased power cycling capability ∙ With integrated gate resistor∙ For higher switching frequencies up to 8kHz∙ UL recognized, file no. E63532Typical Applications∙ AC inverter drives ∙ UPS∙ Electronic welders ∙ Wind power ∙ Public transportRemarks∙ Case temperature limited to T c = 125°C max, recomm.T op = -40... +150°C, product rel. results valid for T j = 150°C ∙ Max. operating DC link voltage limited to 800VGBSEMITRANS 3Characteristics Symbol Conditions min. typ. max. UnitInverse diodeV F = V EC I F = 600 A V GE = 0 V chiplevel T j = 25 °C 1.80 2.13 V T j = 150 °C 1.83 2.17 V V F0chiplevel T j = 25 °C 1.19 1.40 V T j = 150 °C 0.97 1.10 V r F chiplevelT j = 25 °C 1.02 1.21 mΩ T j = 150 °C1.44 1.79mΩ I RRM V CC = 600 V I F = 600 AV GE = -15 Vdi/dt off = 9200 A/µs T j = 150 °C 680 A Q rr T j = 150 °C130 µC E rr T j = 150 °C 60mJ R th(j-c)per diode0.095K/W R th(c-s)per diode, (λgrease = 0.81 W/(m*K))0.039 K/W ModuleL CE 15nH R CC’+EE’measured per switchT j = 25 °C0.55mΩ T j = 150 °C0.85 mΩ R th(c-s)1calculated without thermal coupling (λgrease =0.81 W/(m*K)) 0.0088 K/W R th(c-s)2including thermal coupling,Ts underneath module (λgrease =0.81 W/(m*K)) 0.014K/W M s to heat sink M63 5 Nm M t to terminal M62.55 Nm -Nm w325 gSEMITRANS ® 3 IGBT4 ModulesSKM600GB12E4D1Features*∙IGBT4 = 4th generation medium fast trench IGBT (Infineon) Exciter module∙ CAL4HD = 4th generation (HD) CAL-diode optimized for low static losses∙ Insulated copper baseplate using DBC technology (Direct Bonded Copper)∙ Increased power cycling capability ∙ With integrated gate resistor∙ For higher switching frequencies up to 8kHz∙ UL recognized, file no. E63532Typical Applications∙ AC inverter drives ∙ UPS∙ Electronic welders ∙ Wind power ∙ Public transportRemarks∙ Case temperature limited to T c = 125°C max, recomm.T op = -40... +150°C, product rel. results valid for T j = 150°C ∙ Max. operating DC link voltage limited to 800VGBFig. 1: Typ. output characteristic, inclusive R CC'+ EE'Fig. 2: Rated current vs. temperature I C = f (T C )Fig. 3: Typ. turn-on /-off energy = f (I C ) Fig. 4: Typ. turn-on /-off energy = f (R G )Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristicFig. 7: Typ. switching times vs. I C Fig. 8: Typ. switching times vs. gate resistor R GFig. 9: Transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. R CC'+ EE'Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode peak reverse recovery chargePinout and DimensionsGBThis is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, chapter IX.*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.。
赛米控丹佛斯电子 SK_40_BHL_066T 数据表
SEMITOP ®3Half controlled bridge rectifier + IGBT braking chopperSK 40 BHL 066TFeatures•Compact design •One screw mounting•Heat transfer and isolation through direct copper bonded aluminum oxide ceramic (DBC)•600V Trench3 IGBT technology •Free-wheeling chopper diode CAL technology•UL file recognized, file no E63-532Typical Applications*•RectifierSymbolConditions Values UnitIGBT 1V CES T j =25°C 600V I C T j =150°C T s =25°C 33A T s =70°C 25A I C T j =175°CT s =25°C 37A T s =70°C30A I Cnom 30A I CRM I CRM = 2 x I Cnom 60A V GES-20 (20)V t psc V CC =360V V GE ≤ 15V V CES ≤ 600V T j =150°C6µs T j-40 (175)°CAbsolute Maximum Ratings SymbolConditionsValuesUnitThyristor 1V RRM 1600V I T(AV)T j =130°C, T s =80°C 19A I TSM tp =10ms, sin 180°, T j =25°C 370A i 2t tp =10ms, sin 180°, T j =25°C685A²s T j-40 (130)°CAbsolute Maximum Ratings SymbolConditions Values UnitDiode 1V RRM T j =25°C 1600V I F T j =125°C T s =25°C 36A T s =70°C 24A I F T j =150°CT s =25°C 41A T s =70°C31A I Fnom 13A I FRM A I FSM 10ms, sin 180°, T j =150°C270A T j-40 (150)°CAbsolute Maximum Ratings SymbolConditions Values UnitDiode 2V RRM T j =25°C 600V I F T j =175°CT s =25°C 34A T s =70°C27A I Fnom 25A I FRM I FRM = 2 x I Fnom 50A I FSM 10ms sin 180°T j =25°C 185A T j =150°C160A T j-40 (175)°CSEMITOP ®3Half controlled bridge rectifier + IGBT braking chopperSK 40 BHL 066TFeatures•Compact design •One screw mounting•Heat transfer and isolation through direct copper bonded aluminum oxide ceramic (DBC)•600V Trench3 IGBT technology •Free-wheeling chopper diode CAL technology•UL file recognized, file no E63-532Typical Applications*•RectifierSymbolConditions Values UnitModule I t(RMS)A T stg -40...125°C V isolAC, sinusoidal, t =1min2500VCharacteristicsSymbolConditionsmin.typ.max.UnitIGBT 1V CE(sat)I C =30A V GE =15V chiplevel T j =25°C 1.50 1.90V T j =150°C 1.65 2.10V V CE0chiplevel T j =25°C 0.90 1.00V T j =150°C 0.850.90V r CE V GE =15V chiplevel T j =25°C 2030m ΩT j =150°C2740m ΩV GE(th)V GE =V CE V, I C =0.43mA5 5.8 6.5V I CES V GE =0V V CE =600V T j =25°C0.01mA -mA C ies V CE =25V V GE =0V f =1MHz 1.63nF C oes f =1MHz 0.108nF C res f =1MHz0.05nF Q G - 7 V...+ 15 V 240nC R Gint T j =25°C 0Ωt d(on)V CC =300V I C =30A R G on =25ΩR G off =25Ωdi/dt on =2335A/µs di/dt off =2335A/µs V GE neg =-7V V GE pos =15V T j =150°C 24ns t r T j =150°C 27ns E on T j =150°C 0.97mJ t d(off)T j =150°C 328ns t f T j =150°C 54ns E off T j =150°C 1.77mJ R th(j-s)per IGBT1.65K/WCharacteristics SymbolConditions min.typ.max.UnitThyristor 1V T I T =25A chip T j =25°C 1.22V T j =130°C1.19V V T(TO)T j =130°C 0.85V r T T j =130°C 13.9m ΩV GT T j =25°C 1.65V I GT T j =25°C 100mA I H T j =25°C 165mA I L T j =25°C 330mA dv/dt cr T j =130°C 1000V/µs di/dt cr T j =130°C50A/µs Rth (j-s)1.7K/WSEMITOP ®3Half controlled bridge rectifier + IGBT braking chopperSK 40 BHL 066TFeatures•Compact design •One screw mounting•Heat transfer and isolation through direct copper bonded aluminum oxide ceramic (DBC)•600V Trench3 IGBT technology •Free-wheeling chopper diode CAL technology•UL file recognized, file no E63-532Typical Applications*•RectifierCharacteristics SymbolConditions min.typ.max.UnitDiode 1V FI F =13A chiplevelT j =25°C 1.00 1.21V T j =150°C 0.90 1.10V V F0chiplevel T j =25°C 0.880.98V T j =125°C 0.730.83V r Fchiplevel T j =25°C 9.218m ΩT j =125°C1321m ΩI RRM I F =13A-A Q rr -µC E rr -mJ R th(j-s)per Diode1.7K/WCharacteristics SymbolConditionsmin.typ.max.UnitDiode 2V FI F =25A chiplevelT j =25°C 1.45 1.84V T j =150°C 1.47 1.75V V F0chiplevel T j =25°C 0.99 1.10V T j =150°C 0.800.89V r F chiplevel T j =25°C 1830m ΩT j =150°C 2734m ΩI RRM I F =30Adi/dt off =920A/µs V GE =-7V V CC =600V T j =150°C 7.5A Q rr T j =150°C 1.8µC E rr T j =150°C0.26mJ R th(j-s)per Diode2.3K/WCharacteristics SymbolConditions min.typ.max.UnitModule M s to heatsink 2.252.5Nm wweight29gCharacteristics SymbolConditionsmin.typ.max.UnitTemperature SensorR 100T r =100°C493 ± 5%ΩB 100/125R (T)=R 100exp[B 100/125(1/T-1/T 100)]; T[K];3550 ±2%KSEMITOP®3This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, chapter IX.*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.。
Eaton Moeller B3三相电缆联系器三相电缆联系器型号044945说明书
Eaton 044945Eaton Moeller® series B3 Three-phase busbar link, Circuit-breaker:2, 99 mm, For PKZM0-... or PKE12, PKE32 without side mountedauxiliary contacts or voltage releasesGeneral specificationsEaton Moeller® series B3 AccessoryThree-phase busbar link044945401508044945499 mm34 mm12 mm0.038 kgUL 508UL File No.: E36332IEC/EN 60947-4-1CSA-C22.2 No. 14CSACSA Class No.: 3211-06CSA File No.: 98494ULUL Category Control No.: NLRV CE For parallel power feed to several motor-protective circuit-breakers on terminals 1, 3, 5Product Name Catalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes63 AIs the panel builder's responsibility. The specifications for the switchgear must be observed.Meets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Is the panel builder's responsibility.6 KV0 kA54 mm55 °C0 mm²Black5.5Insulated0 W DA-DC-00004891.pdfDA-DC-00004918.pdfDA-DC-00004920.pdfDA-DC-00004883.pdfDA-DC-00004917.pdfDA-DC-00004945.pdfDA-DC-00004911.pdfDA-DC-00004921.pdfDA-DC-00004879.pdfDA-DC-00004884.pdfDA-DC-00004962.pdfDA-DC-00004890.pdfDA-DC-00004888.pdfDA-DC-00004892.pdfDA-DC-00004950.pdfDA-DC-00004914.pdfDA-DC-00004944.pdfDA-DC-00004887.pdfeaton-manual-motor-starters-busbar-b3-accessory-dimensions-010.eps eaton-manual-motor-starters-busbar-b3-accessory-3d-drawing-004.epsDA-CE-ETN.B3.1_2-PKZ0IL122027ZUDA-CS-b3_1_2_pkz0DA-CD-b3_1_2_pkz0DA-DC-00004554.pdfDA-DC-00004601.pdfDA-DC-00004109.pdfDA-DC-00004245.pdfRated operational current for specified heat dissipation (In) 10.11 Short-circuit rating10.4 Clearances and creepage distances10.12 Electromagnetic compatibility10.2.5 Lifting10.2.3.1 Verification of thermal stability of enclosures10.8 Connections for external conductorsRated surge voltageRated conditional short-circuit current (Iq)Pitch dimensionsAmbient operating temperature - maxCross sectionColorNumber of modular spacingsFeaturesStatic heat dissipation, non-current-dependent Pvs10.9.3 Impulse withstand voltage Declarations of conformityDibujoseCAD model Instrucciones de instalación mCAD modelReportes de certificacionesIs the panel builder's responsibility.Number of polesThree-poleAmbient operating temperature - min-25 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Used withPKZ0PKE12PKE32Rated uninterrupted current (Iu)63 AElectric connection typeFork10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Heat dissipation per pole, current-dependent Pvid1.1 WProduct categoryAccessoriesEquipment heat dissipation, current-dependent Pvid3.3 WHeat dissipation capacity Pdiss0 WSuitable for2 Circuit-breakersSuitable for number of devices210.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of phases310.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIRated short-time withstand current (Icw)0 kARated operational voltage (Ue) at AC - max690 VPollution degree310.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Rated impulse withstand voltage (Uimp)6000 V AC10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsCan be extended by rotating installation10.2.2 Corrosion resistanceMeets the product standard's requirements.10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Todos los derechos reservados. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia690 V 45 + 9 mmRated operational voltage (Ue) - max Mounting width。
HTT1213E中文资料
Sales Offices
Hitachi, Ltd.
Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109
Collector to base breakdown V(BR)CBO voltage Collector cutoff current Collector cutoff current Emitter cutoff current DC current transfer ratio ICBO ICEO IEBO hFE
URL
/
For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Europe GmbH Electronic Components Group Dornacher Straße 3 D-85622 Feldkirchen Postfach 201, D-85619 Feldkirchen Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : .sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL :
AK4399EQ中文资料
High Performance 123dB Premium 32-Bit DACGENERAL DESCRIPTIONAK4399 is a 32-bit DAC, which corresponds to DVD-Audio systems. An internal circuit includes newly developed 32bit Digital Filter for better sound quality achieving low distortion characteristics and wide dynamic range. The AK4399 has full differential SCF outputs, removing the need for AC coupling capacitors and increasing performance for systems with excessive clock jitter. The AK4399 accepts 192kHz PCM data and 1-bit DSD data, ideal for a wide range of applications including DVD-Audio and SACD.FEATURES• 128x Over sampling• Sampling Rate: 30kHz ∼ 216kHz• 32Bit 8x Digital Filter (Short delay option GD=7/fs)- Ripple: ±0.005dB, Attenuation: 100dB• High Tolerance to Clock Jitter• Low Distortion Differential Output• DSD data input• Digital De-emphasis for 32, 44.1, 48kHz sampling• Soft Mute• Digital Attenuator (255 levels and 0.5dB step)• Mono Mode• External Digital Filter Mode• THD+N: -105dB• DR, S/N: 123dB• I/F Format: 24/32bit MSB justified, 16/20/24/32bit LSB justified, I2S, DSD•Master Clock:30kHz ~ 32kHz: 1152fs30kHz ~ 54kHz: 512fs or 768fs30kHz ~ 108kHz: 256fs or 384fs108kHz ~ 216kHz: 128fs or 192fs• Power Supply: 4.75 ∼ 5.25V• Digital Input Level: TTL• Package: 44pin LQFP■Block DiagramBlock Diagram■ Ordering GuideAK4399EQ −10 ∼ +70°C 44pin LQFP (0.8mm pitch)AKD4399 Evaluation Board for AK4399■ Pin LayoutAOUTLP A O U T L N34 VCML3335NC 36 NC 37 NC38NC 39 VSS3 40 AVDD 41 MCLK42VSS4 43 NC 44V S S 232V D D L 31V R E F H L30V R E F L L29N C28V R E F L R27V R E F H R26V D D R25V S S 1 24A O U T R N23D V D D1 P D N2B IC K /D C L K3S D A T A /D S D L4L R C K /D S D R /W C K5S M U T E /C S N6T S T 1/C A D 07D E M 0/C C L K8 D E M 1/C D T I9 D I F 0/C A D 110 D I F 1/D Z F L11 2221201918171615141312AOUTRP VCMR NC DINL DINR NC BCK TST2/DZFR PSN NC DIF2AK4399Top ViewPIN/FUNCTIONNo. Pin Name I/O Function1DVDD-Digital Power Supply Pin, 4.75 ∼ 5.25V2 PDN I Power-Down Mode PinWhen at “L”, the AK4399 is in power-down mode and is held in reset.The AK4399 should always be reset upon power-up.BICK I Audio Serial Data Clock Pin in PCM Mode 3DCLK I DSD Clock Pin in DSD Mode SDATA I Audio Serial Data Input Pin in PCM Mode 4DSDL I DSD Lch Data Input Pin in DSD Mode LRCK I L/R Clock Pin in PCM Mode DSDR I DSD Rch Data Input Pin in DSD Mode5 WCK I Word Clock input pinSMUTE I Soft Mute Pin in Parallel Control ModeWhen this pin is changed to “H”, soft mute cycle is initiated. When returning “L”, the output mute releases.6CSN I Chip Select Pin in Serial Control Mode TST1 I Test Pin in Parallel Control Mode (Internal pull-down pin) 7CAD0 I Chip Address 0 Pin in Serial Control Mode (Internal pull-down pin)DEM0 I De-emphasis Enable 0 Pin in Parallel Control Mode 8CCLK I Control Data Clock Pin in Serial Control Mode DEM1 I De-emphasis Enable 1 Pin in Parallel Control Mode 9CDTI I Control Data Input Pin in Serial Control Mode DIF0 I Digital Input Format 0 Pin in PCM Mode 10CAD1 I Chip Address 1 Pin in Serial Control Mode DIF1 I Digital Input Format 1 Pin in PCM Mode 11DZFL O Lch Zero Input Detect Pin in Serial Control Mode 12 DIF2 IDigital Input Format 2 Pin in PCM Mode13 NC-No internal bonding. Connect to GND.Note: All input pins except internal pull-up/down pins must not be left floating.14 PSNIParallel or Serial Select Pin (Internal pull-up pin)“L”: Serial Control Mode, “H”: Parallel Control Mode TST2 ITest pin in Parallel Control Mode.Connect to GND. 15DZFR O Rch Zero Input Detect Pin in Serial Control Mode 16 BCK I Audio Serial Data Clock Pin (Internal pull-down pin) 17 NC - No internal bonding. Connect to GND.18 DINR I Rch Audio Serial Data Input Pin (Internal pull-down pin) 19 DINL I Lch Audio Serial Data Input Pin (Internal pull-down pin) 20 NC - No internal bonding. Connect to GND.21 VCMR - Right channel Common Voltage Pin,Normally connected to VSS with a 10uF electrolytic cap. 22 AOUTRP O Rch Positive Analog Output Pin 23 AOUTRN O Rch Negative Analog Output Pin 24 VSS1 - Ground Pin25 VDDR - Rch Analog Power Supply Pin, 4.75 ∼ 5.25V 26 VREFHR I Rch High Level Voltage Reference Input Pin 27 VREFLR I Rch Low Level Voltage Reference Input Pin 28 NC - No internal bonding. Connect to GND.29 VREFLL I Lch Low Level Voltage Reference Input Pin 30 VREFHL I Lch High Level Voltage Reference Input Pin 31 VDDL - Lch Analog Power Supply Pin, 4.75 ∼ 5.25V 32 VSS2 - Ground Pin33 AOUTLN O Lch Negative Analog Output Pin 34 AOUTLP O Lch Positive Analog Output Pin 35 VCML - Left channel Common Voltage Pin,Normally connected to VSS with a 10uF electrolytic cap. 36 NC - No internal bonding. Connect to GND. 37 NC - No internal bonding. Connect to GND. 38 NC - No internal bonding. Connect to GND. 39 NC - No internal bonding. Connect to GND. 40 VSS3 - Ground Pin41 AVDD - Analog Power Supply Pin, 4.75 ∼ 5.25V 42 MCLK I Master Clock Input Pin 43 VSS4 - Ground Pin44 NC-No internal bonding. Connect to GND.Note: All input pins except internal pull-up/down pins must not be left floating.■Handling of Unused PinThe unused I/O pins should be processed appropriately as below.(1) Parallel Mode (PCM Mode only)Classification Pin Name SettingAOUTLP, AOUTLN These pins must be open.AnalogAOUTRP, AOUTRN These pins must be open.SMUTE This pin must be connected to VSS4.DigitalTST1 This pin must be open.TST2 This pin must be connected to VSS4.(2) Serial Mode1. PCM ModeClassification Pin Name SettingAOUTLP, AOUTLN These pins must be open.AnalogAOUTRP, AOUTRN These pins must be open.DIF2 These pins must be connected to VSS4.DigitalDZFL, DZFR These pins must be open.2. DSD ModeClassification Pin Name SettingAOUTLP, AOUTLN These pins must be open.AnalogAOUTRP, AOUTRN These pins must be open.DZFL, DZFR These pins must be open.ABSOLUTE MAXIMUM RATINGS(VSS1-4 =0V; Note 1)Parameter Symbol min max UnitsPower Supplies:Analog Analog Digital AVDD VDDL/R DVDD −0.3 −0.3 −0.3 6.0 6.06.0V V V Input Current, Any Pin Except Supplies IIN - ±10 mA Digital Input Voltage VIND −0.3 DVDD+0.3 V Ambient Temperature (Power applied) Ta −10 70 °C Storage Temperature Tstg −65 150 °CNote 1. All voltages with respect to ground.Note 2. VSS1-4 must be connected to the same analog ground plane.WARNING: Operation at or beyond these limits may result in permanent damage to the device.Normal operation is not guaranteed at these extremes.RECOMMENDED OPERATING CONDITIONS(VSS1-4 =0V; Note 1)Parameter Symbol min typ max UnitsPower Supplies(Note 3)AnalogAnalogDigitalAVDD VDDL/R DVDD 4.75 4.75 4.75 5.0 5.0 5.0 5.25 5.25 5.25 V V V VoltageReference(Note 4)“H” voltage reference “L” voltage reference VREFH − VREFL VREFHL/R VREFLL/R ΔVREF AVDD −0.5VSS 3.0 - - - AVDD - AVDD V V V Note 1. All voltages with respect to ground.Note 3. The power up sequence between AVDD, VDDL/R and DVDD is not critical. Note 4. The analog output voltage scales with the voltage of (VREFH − VREFL). AOUT (typ.@0dB) = (AOUT+) − (AOUT −) = ±2.8Vpp × (VREFHL/R − VREFLL/R)/5.* AKEMD assumes no responsibility for the usage beyond the conditions in this data sheet.ANALOG CHARACTERISTICS(Ta=25°C; AVDD=VDDL/R=DVDD=5.0V; VSS1-4 =0V; VREFHL/R=AVDD, VREFLL/R= VSS; Input data = 24bit; R L ≥ 1k Ω; BICK=64fs; Signal Frequency = 1kHz; Sampling Frequency = 44.1kHz; Measurement bandwidth = 20Hz ~ 20kHz; External Circuit: Figure 20; unless otherwise specified.)Parameter min typ max Units Resolution - - 24 Bits Dynamic Characteristics (Note 5)fs=44.1kHz BW=20kHz 0dBFS −60dBFS - - -105 -60 98 - dB dB fs=96kHzBW=40kHz 0dBFS −60dBFS - - 102 -57 - - dB dB THD+Nfs=192kHz BW=40kHz BW=80kHz 0dBFS −60dBFS −60dBFS102 -57 -54 - - - dB dB dB Dynamic Range (−60dBFS with A-weighted) (Note 6) 117 123 dB S/N (A-weighted) (Note 7) 117 123 dB Interchannel Isolation (1kHz) 110 120 dB DC AccuracyInterchannel Gain Mismatch - 0.15 0.3 dB Gain Drift (Note 8) - 20 - ppm/°C Output Voltage (Note 9) ±2.65 ±2.8 ±2.95 Vpp Load Capacitance - - 25 pF Load Resistance (Note 10) 1 - - k Ω Power Supplies Power Supply CurrentNormal operation (PDN pin = “H”) AVDD + VDDL/R DVDD (fs ≤ 96kHz) DVDD (fs = 192kHz) - - - 60 43 46 90 - 70 mA mA mAPower down (PDN pin = “L”) (Note 11) AVDD+VDDL/R+DVDD - 10 100 μANote 5. Measured by Audio Precision, System Two. Averaging mode. Refer to the evaluation board manual. Note 6. Figure 20 External LPF Circuit Example 2. 101dB for 16-bit data and 118dB for 20-bit data. Note 7. Figure 20 External LPF Circuit Example 2. S/N does not depend on input data size. Note 8. The voltage on (VREFH − VREFL) is held +5V externally.Note 9. Full-scale voltage(0dB). Output voltage scales with the voltage of (VREFHL/R − VREFLL/R). AOUT (typ.@0dB) = (AOUT+) − (AOUT −) = ±2.8Vpp × (VREFHL/R − VREFLL/R)/5.Note 10. Regarding Load Resistance, AC load is 1k Ω (min) with a DC cut capacitor (Figure 20). DC load is 1.5k ohm(min) without a DC cut capacitor (Figure 19). The load resistance value is with respect to ground. Analogcharacteristics are sensitive to capacitive load that is connected to the output pin. Therefore the capacitive load must be minimized.Note 11. In the power down mode. The P/S pin = DVDD, and all other digital input pins including clock pins(MCLK, BICK and LRCK) are held VSS4.SHARP ROLL-OFF FILTER CHARACTERISTICS (fs = 44.1kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Normal Speed Mode; DEM=OFF; SD bit=“0”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 22.0520.0-kHzkHzStopband (Note 12) SB 24.1 kHzPassband Ripple PR ±0.005 dBStopband Attenuation SA 100 dBGroup Delay (Note 13) GD - 36 - 1/fsDigital Filter + SCFFrequency Response: 0 ∼ 20.0kHz - ±0.2 - dBSHARP ROLL-OFF FILTER CHARACTERISTICS (fs = 96kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Double Speed Mode; DEM=OFF; SD bit=“0”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 48.043.5-kHzkHzStopband (Note 12) SB 52.5 kHzPassband Ripple PR ±0.005 dBStopband Attenuation SA 95 dBGroup Delay (Note 13) GD - 36 - 1/fsDigital Filter + SCFFrequency Response: 0 ∼ 40.0kHz - ±0.3 - dBSHARP ROLL-OFF FILTER CHARACTERISTICS (fs = 192kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Quad Speed Mode; DEM=OFF; SD bit=“0”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 96.087.0-kHzkHzStopband (Note 12) SB 105 kHz Passband Ripple PR ±0.005 dB Stopband Attenuation SA 90 dBGroup Delay (Note 13) GD - 36 - 1/fsDigital Filter + SCFFrequency Response: 0 ∼ 80.0kHz - +0/−1 - dB Note 12. The passband and stopband frequencies scale with fs. For example, PB=0.4535×fs (@±0.01dB), SB=0.546×fs. Note 13. The calculating delay time which occurred by digital filtering. This time is from setting the 16/20/24bit data of both channels to input register to the output of analog signal.SHORT DELAY FILTER CHARACTERISTICS (fs = 44.1kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Normal Speed Mode; DEM=OFF; SD bit=“1”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 22.0520.0-kHzkHzStopband (Note 12) SB 24.1 kHzPassband Ripple PR ±0.005 dBStopband Attenuation SA 100 dBGroup Delay (Note 13) GD - 7 - 1/fsDigital Filter + SCFFrequency Response : 0 ∼ 20.0kHz - ±0.2 - dBSHORT DELAY FILTER CHARACTERISTICS (fs = 96kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Double Speed Mode; DEM=OFF; SD bit=“1”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 48.043.5-kHzkHzStopband (Note 12) SB 52.5 kHzPassband Ripple PR ±0.005 dBStopband Attenuation SA 95 dBGroup Delay (Note 13) GD - 7 - 1/fsDigital Filter + SCFFrequency Response : 0 ∼ 40.0kHz - ±0.3 - dBSHORT DELAY FILTER CHARACTERISTICS (fs = 192kHz)(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V; Quad Speed Mode; DEM=OFF; SD bit=“1”)Parameter SymbolmintypmaxUnits Digital FilterPassband (Note 12)±0.01dB−6.0dB PB 0- 96.087.0-kHzkHzStopband (Note 12) SB 105 kHz Passband Ripple PR ±0.005 dB Stopband Attenuation SA 90 dBGroup Delay (Note 13) GD - 7 - 1/fsDigital Filter + SCFFrequency Response : 0 ∼ 80.0kHz - +0/−1 - dBDC CHARACTERISTICS(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V)Parameter SymbolmintypmaxUnitsHigh-Level Input Voltage Low-Level Input Voltage VIHVIL2.4----0.8VVHigh-Level Output Voltage (Iout=−100μA) Low-Level Output Voltage (Iout=100μA) VOHVOLDVDD−0.5----0.5VVInput Leakage Current (Note 14)Iin - - ±10 μA Note 14. The TST1/CAD0 and P/S pins have internal pull-up devices, nominally 100kΩ. Therefore The TST1/CAD0 and P/S pins are not included.SWITCHING CHARACTERISTICS(Ta=25°C; AVDD=VDDL/R=4.75 ∼ 5.25V, DVDD=4.75 ∼ 5.25V)Parameter Symbol mintypmaxUnits Master Clock TimingFrequency Duty Cycle fCLKdCLK7.74041.47260MHz%LRCK Frequency (Note 15)1152fs, 512fs or 768fs 256fs or 384fs128fs or 192fsDuty CyclefsnfsdfsqDuty3054108455410821655kHzkHzkHz%PCM Audio Interface Timing BICK Period1152fs, 512fs or 768fs256fs or 384fs128fs or 192fsBICK Pulse Width LowBICK Pulse Width HighBICK “↑” to LRCK Edge (Note 16) LRCK Edge to BICK “↑” (Note 16) SDATA Hold TimeSDATA Setup TimetBCKtBCKtBCKtBCKLtBCKHtBLRtLRBtSDHtSDS1/128fsn1/64fsd1/64fsq303020202020nsnsnsnsnsnsnsnsnsExternal Digital Filter ModeBICK PeriodBCK Pulse Width LowBCK Pulse Width HighBCK “↑” to WCK Edge WCK Edge to BCK “↑” WCK Pulse Width LowWCK Pulse Width HighDATA Hold TimeDATA Setup TimetBtBLtBHtBWtWBtWCKtWCHtDHtDS27101055545455nsnsnsnsnsnsnsnsnsDSD Audio Interface TimingDCLK PeriodDCLK Pulse Width LowDCLK Pulse Width HighDCLK Edge to DSDL/R (Note 17)tDCKtDCKLtDCKHtDDD1/64fs160160−20 20nsnsnsnsControl Interface TimingCCLK PeriodCCLK Pulse Width Low Pulse Width High CDTI Setup TimeCDTI Hold TimeCSN High TimeCSN “↓” to CCLK “↑” CCLK “↑” to CSN “↑”tCCKtCCKLtCCKHtCDStCDHtCSWtCSStCSH200808050501505050nsnsnsnsnsnsnsnsReset TimingPDN Pulse Width (Note 18)tPD 150 nsNote 15. When the 1152fs, 512fs or 768fs /256fs or 384fs /128fs or 192fs are switched, the AK4399 should be reset by thePDN pin or RSTN bit.Note 16. BICK rising edge must not occur at the same time as LRCK edge. Note 17. DSD data transmitting device must meet this time.Note 18. The AK4399 can be reset by bringing the PDN pin “L” to “H” upon power-up.■ Timing DiagramVIHMCLKVILVIH LRCKVILVIHBICKVILVIH WCKVILVIH BCKVILClock TimingLRCKVIH BICKVILVIHSDATAVILVIH VILVIH DCLKVILVIH DSDLDSDRVILAudio Serial Interface Timing (DSD Normal Mode, DCKB bit = “0”)VIH DCLKVILVIH DSDL DSDRVILAudio Serial Interface Timing (DSD Phase Modulation Mode, DCKB bit = “0”)CSNVIH CCLKVILVIH CDTI VILVIHVILWRITE Command Input TimingCSNVIH CCLKVILVIH CDTI VILVIHVILD3D2D1D0WRITE Data Input TimingPDNVILPower Down & Reset TimingWCKVIH BCKVILVIH DATAVILVIH VILExternal Digital Filter I/F modeOPERATION OVERVIEW■D/A Conversion ModeIn serial mode, the AK4399 can perform D/A conversion for either PCM data or DSD data. The D/P bit controls PCM/DSD mode. When DSD mode, DSD data can be input from DCLK, DSDL and DSDR pins. When PCM mode, PCM data can be input from BICK, LRCK and SDATA pins. When PCM/DSD mode is changed by D/P bit, the AK4399 should be reset by RSTN bit. It takes about 2/fs to 3/fs to change the mode. In parallel mode, the AK4399 performs for only PCM data.DP bit Interface0 PCM1 DSDTable 1. PCM/DSD Mode ControlWhen DP bit= “0”, an internal digital filter or external digital filter can be selected. When using an external digital filter (EX DF I/F mode), data is input to each MCLK, BCK, WCK, DINL and DINR pin. EXD bit controls the modes. When switching internal and external digital filters, the AK4399 must be reset by RSTN bit. A Digital filter switching takes 2~3k/fs.Ex DF bit Interface0 PCMI/F1 EXDFTable 2. Digital Filter Control (DP bit = “0”)■System Clock[1] PCM ModeThe external clocks, which are required to operate the AK4399, are MCLK, BICK and LRCK. MCLK should be synchronized with LRCK but the phase is not critical. The MCLK is used to operate the digital interpolation filter and the delta-sigma modulator. Sampling speed and MCLK frequency are detected automatically and then the initial master clock is set to the appropriate frequency (Table 3). When external clocks are changed, the AK4399 should be reset by the PDN pin or RSTN bit.The AK4399 is automatically placed in reset state when MCLK and LRCK are stopped during a normal operation (PDN pin =“H”), and the analog output becomes Hi-Z. When MCLK and LRCK are input again, the AK4399 exit reset state and starts the operation. After exiting system reset (PDN pin =“L”→“H”) at power-up and other situations, the AK4399 is in power-down mode until MCLK and LRCK are supplied.The MCLK frequency corresponding to each sampling speed should be provided (Table 4).RateSamplingMCLK Mode30kHz~32kHz1152fs Normal512fs 768fs Normal 30kHz~54kHz256fs 384fs Double 30kHz~108kHz128fs 192fs Quad 108kHz~216kHzTable 3. Sampling SpeedLRCK MCLK(MHz) fs 128fs 192fs 256fs 384fs 512fs 768fs 1152fs32.0kHz N/A N/A 8.1920 12.2880 16.3840 24.5760 36.864044.1kHz N/A N/A 11.2896 16.9344 22.5792 33.8688 N/A48.0kHz N/A N/A 12.2880 18.4320 24.5760 36.8640 N/A33.8688 N/A N/A N/A88.2kHz N/A N/A 22.579236.8640 N/A N/A N/A96.0kHz N/A N/A 24.5760176.4kHz 22.5792 33.8688 N/A N/A N/A N/A N/A 192.0kHz 24.5760 36.8640 N/A N/A N/A N/A N/A Table 4. System Clock Example (Parallel Control Mode) (N/A: Not available)MCLK= 256fs/384fs supports sampling rate of 30kHz~108kHz (Table 5). But, when the sampling rate is 30kHz~54kHz, DR and S/N will degrade by approximately 3dB as compared to when MCLK= 512fs/768fs.MCLK DR,S/N256fs/384fs 120dB512fs/768fs 123dBTable 5. Relationship between MCLK frequency and DR, S/N (fs= 44.1kHz)[2] DSD ModeThe external clocks, which are required to operate the AK4399, are MCLK and DCLK. MCLK should be synchronized with DCLK but the phase is not critical. The frequency of MCLK is set by DCKS bit.The AK4399 is automatically placed in reset state when MCLK is stopped during a normal operation (PDN pin =“H”), and the analog output becomes Hi-Z. After exiting system reset (PDN pin =“L”→“H”) at power-up and other situations, the AK4399 is in power-down mode until MCLK is supplied.DCKS bit MCLK Frequency DCLK Frequency(default)0 512fs 64fs1 768fs 64fsTable 6. System Clock (DSD Mode)■ Audio Interface Format[1] PCM ModeData is shifted in via the SDATA pin using BICK and LRCK inputs. Eight data formats are supported and selected by the DIF2-0 pins (Parallel control mode) or DIF2-0 bits (Serial control mode) as shown in Table 7. In all formats the serial data is MSB-first, 2's compliment format and is latched on the rising edge of BICK. Mode 2 can be used for 20-bit and 16-bit MSB justified formats by zeroing the unused LSBs. Settings should be made by DIF2-0 pins in parallel mode and DIF2-0 bits in serial mode.Mode DIF2 DIF1 DIF0 Input Format BICK Figure0 0 0 0 16bit LSB justified ≥ 32fsFigure 1 1 0 0 1 20bit LSB justified ≥ 48fs Figure 2 2 0 1 0 24bit MSB justified ≥ 48fsFigure 3 (default)3 0 1 1 24bit I 2S Compatible ≥ 48fs Figure 4 4 1 0 0 24bit LSB justified ≥ 48fs Figure 2 5 1 0 1 32bit LSB justified ≥ 64fs Figure 5 6 1 1 0 32bit MSB justified ≥64fsFigure 6 7 1 1 1 32bit I 2S Compatible ≥ 64fsFigure 7 Table 7. Audio Interface FormatSDATA BICKLRCKSDATA BICK (32fs)(64fs)Mode 0Mode 0SDATA LRCK BICK (64fs)Mode 1SDATA Mode 4Figure 2. Mode 1/4 TimingBICK(64fs)SDATAFigure 3. Mode 2 Timing Array LRCKBICK(64fs)SDATALRCKSDATABICK(64fs)SDATAFigure 5. Mode 5 Timing元器件交易网[AK4399]LRCK0 1 2 20 21 22 32 33 63 0 1 2 20 21 22 32 33 63 0 1BICK(128fs) SDATA BICK(64fs) SDATA31 30 20 19 18 9 8 1 0 31 30 20 19 18 9 8 1 0 31 31 300 1 212 11 1012 13 14023 24 31 031 301 2121211 1013 14023 24 31310 1Lch Data 31: MSB, 0:LSBRch DataFigure 6. Mode 6 TimingLRCK0 1 2 20 21 22 33 34 63 0 1 2 20 21 22 33 34 63 0 1BICK(128fs) SDATA0311 213 12 1112 13 14024 25 31 0311 2131212 1113 14024 25 31 0 1BICK(64fs) SDATA0 31 21 20 19 9 8 2 1 0 31 21 20 19 9 8 2 1 0Lch Data 31: MSB, 0:LSBRch DataFigure 7. Mode 7 Timing[2] DSD Mode In case of DSD mode, DIF2-0 pins and DIF2-0 bits are ignored. The frequency of DCLK is fixed to 64fs. DCKB bit can invert the polarity of DCLK.DCLK (64fs) DCKB=1 DCLK (64fs) DCKB=0 DSDL,DSDR Normal DSDL,DSDRPhase ModulationD0 D0 D1 D2 D3D1D1D2D2D3Figure 8. DSD Mode TimingMS1005-E-00 - 21 -2008/10元器件交易网[AK4399][3] External Digital Filter Mode (EX DF I/F Mode) DW indicates the number of BCK in one WCK cycle. The audio data is input by MCLK, BCK and WCK from the DINL and DINR pins. Three formats are available (Table 9) by DIF2-0 bits setting. The data is latched on the rising edge of BCK. The BCK and MCLK clocks must be the same frequency and must not burst. BCK and MCLK frequencies for each sampling speed are shown in Table 8. The AK4399 is automatically placed in reset state when MCLK and WCK are stopped during a normal operation (PDN pin =“H”), and the analog output becomes Hi-Z. When MCLK and WCK are input again, the AK4399 exit reset state and starts the operation. After exiting system reset (PDN pin =“L”→“H”) at power-up and other situations, the AK4399 is in power-down mode until MCLK and WCK are supplied. Sampling Speed[kHz] 44.1(30~54) 44.1(30~54) 96(54~108) 96(54~108) 192(108~216) 192(108~216) MCLK&BCK [MHz] 128fs N/A N/A N/A 12.288 3224.576 WCK192fs N/A N/A N/A18.432256fs N/A 11.2896 3224.576384fs N/A16.9344512fs22.5792768fs33.8688ECS 0 1 0 1 0 132 N/A N/A N/A N/A4833.86884836.86496 N/A N/A N/A32 N/A N/A4836.8644836.86496 N/A32 N/A4836.864N/A N/A N/A N/A 96 Table 8 System Clock Example (EX DF I/F mode) (N/A: Not available)16fs DW 8fs DW 8fs DW 4fs DW 4fs DW 2fs DWMode DIF2 DIF1 DIF0 Input Format 0 0 0 0 16bit LSB justified 1 0 0 1 N/A 2 0 1 0 N/A 3 0 1 1 N/A 4 1 0 0 24bit LSB justified 5 1 0 1 32bit LSB justified 6 1 1 0 N/A 7 1 1 1 N/A Table 9 Audio Interface Format (EX DF I/F mode) (N/A: Not available)MS1005-E-00 - 22 -2008/10元器件交易网[AK4399]1/16fs or 1/8fs or 1/4fs or 1/2fsWCK0 1 8 9 10 11 16 17 26 27 28 29 30 31 0 1BCK DINL or DINR03113024 235 6227218201716471548144965654392293194 9500 1BCK DINL or DINR BCK DINL or DINRDon’t care Don’t care Don’t care 31 3 2 1 0 Don’t care Don’t care0 1 5Don’t care6 7 8Don’t care23 24 253117344 452461470 Don’t care0 1Figure 9 EX DF I/F Mode TimingMS1005-E-00 - 23 -2008/10元器件交易网[AK4399]■ D/A Conversion Mode Switching TimingRSTN bit≥4/fsD/A ModePCM Mode ≥0DSD ModeD/A DataPCM DataDSD DataFigure 10. D/A Mode Switching Timing (PCM to DSD)RSTN bit D/A ModeDSD Mode ≥4/fsPCM ModeD/A DataDSD DataPCM DataFigure 11. D/A Mode Switching Timing (DSD to PCM) Note. The signal range is identified as 25% ~ 75% duty ratios in DSD mode. DSD signal must not go beyond this duty range at the SACD format book (Scarlet Book).■ De-emphasis FilterA digital de-emphasis filter is available for 32kHz, 44.1kHz or 48kHz sampling rates (tc = 50/15µs) and is enabled or disabled with DEM1-0 pins or DEM1-0 bits. In case of 256fs/384fs and 128fs/192fs, the digital de-emphasis filter is always off. When DSD mode, DEM1-0 bits are ignored. The setting value is held even if PCM mode and DSD mode are switched. DEM1 0 0 1 1 DEM0 Mode 0 44.1kHz 1 OFF (default) 0 48kHz 1 32kHz Table 10. De-emphasis Control■ Output VolumeThe AK4399 includes channel independent digital output volumes (ATT) with 255 levels at linear step including MUTE. These volume control is in front of the DAC and it can attenuate the input data from 0dB to –127dB and mute. When changing output levels, transitions are executed in soft change; thus no switching noise occurs during these transitions.MS1005-E-00 - 24 -2008/10元器件交易网[AK4399]■ Zero Detection (PCM mode, DSD mode)The AK4399 has channel-independent zeros detect function. When the input data at each channel is continuously zeros for 8192 LRCK cycles, the DZF pin of each channel goes to “H”. The DZF pin of each channel immediately return to “L” if the input data of each channel is not zero after going to “H”. If the RSTN bit is “0”, the DZF pins of both channels go to “H”. The DZF pins of both channels go to “L” at 4 ~ 5/fs after RSTN bit returns to “1”. If DZFM bit is set to “1”, the DZF pins of both channels go to “H” only when the input data for both channels are continuously zeros for 8192 LRCK cycles. The zero detect function can be disabled by setting the DZFE bit. In this case, DZF pins of both channels are always “L”. The DZFB bit can invert the polarity of the DZF pin.■ Mono OutputThe AK4399 can select input/output for both output channels by setting the MONO bit and SELLR bit. This function is available for any audio format.MONO bit 0 0 1 1SELLR bit 0 1 0 1Lch Out Lch In Rch In Lch In Rch InRch Out Rch In Lch In Lch In Rch InTable 11 MONO Mode Output SelectMS1005-E-00 - 25 -2008/10。
23212007_ED患者行夜间勃起功能监测时睡眠质量的调查研究
２０２０年１１月第７卷第１１期Ｎｏｖｅｍｂｅｒ．２０２０，Ｖｏｌ．７，Ｎｏ．１１世界睡眠医学杂志ＷｏｒｌｄＪｏｕｒｎａｌｏｆＳｌｅｅｐＭｅｄｉｃｉｎｅ１８７３ＥＤ患者行夜间勃起功能监测时睡眠质量的调查研究黄晓芳１ 丁一郎１ 蔡秀免２ 张丽明１（１福建医科大学附属第一医院男科，福州，３５０００５；２福建医科大学附属第一医院心外科，福州，３５０００５）摘要 目的：调查阴茎勃起功能障碍（ＰｅｎｉｌｅＥｒｅｃｔｉｌｅＤｙｓｆｕｎｃｔｉｏｎ，ＥＤ）患者的睡眠质量，探讨患者睡眠质量和夜间勃起功能监测（ＮｏｃｔｕｒｎａｌＰｅｎｉｌｅＴｕｍｅｓｃｅｎｃｅ，ＮＰＴ）结果的相关性，制定科学的护理干预对策。
方法：便利抽样选取９０例次行夜间勃起功能监测的ＥＤ患者，于夜间监测后采用中文版ＲｉｃｈａｒｄｓＣａｍｐｂｅｌｌ睡眠量表（ＲｉｃｈａｒｄｓＣａｍｐｂｅｌｌＳｌｅｅｐＱｕｅｓｔｉｏｎｎａｉｒｅ，ＲＣＳＱ）进行调查。
结果：本研究显示ＥＤ患者睡眠质量高者占４６ ７％（４２／９０），睡眠质量一般者占４０％（３６／９０），睡眠质量低的者１３ ３％（１２／９０），睡眠质量的平均总分为（６１ ８５±２７ ７５）分；监测结果正常组和监测结果异常组患者的ＲＣＳＱ睡眠各维度得分差异均有统计学意义（Ｐ＜０ ０５），环境因素噪声差异无统计学意义（Ｐ＞０ ０５）。
２组患者监测结果与ＲＣＳＱ睡眠等级之间呈正相关（Ｐ＜０ ０１，ｒ＝０ ３１４）。
结论：睡眠质量对夜间勃起功能监测结果存在显著影响，应采取相关护理措施对患者的睡眠质量进行干预，以优化患者的睡眠质量，同时，建议完善睡眠质量的评估，有利于协助判断夜间勃起功能监测结果的准确性。
关键词 夜间勃起功能监测；睡眠质量；阴茎勃起功能障碍ＩｎｖｅｓｔｉｇａｔｉｏｎｏｎＳｌｅｅｐＱｕａｌｉｔｙｉｎＥＤＰａｔｉｅｎｔｓｗｉｔｈＮｏｃｔｕｒｎａｌＰｅｎｉｌｅＴｕｍｅｓｃｅｎｃｅＨＵＡＮＧＸｉａｏｆａｎｇ１，ＤＩＮＧＹｉｌａｎｇ１，ＣＡＩＸｉｕｍｉａｎ２，ＺＨＡＮＧＬｉｍｉｎｇ１（１ＤｅｐａｒｔｍｅｎｔｏｆＡｎｄｒｏｌｏｇｙ，ｔｈｅＦｉｒｓｔＡｆｆｉｌｉａｔｅｄＨｏｓｐｉｔａｌｏｆＦｕｊｉａｎＭｅｄｉｃａｌＵｎｉｖｅｒｓｉｔｙ，Ｆｕｚｈｏｕ３５０００５，Ｃｈｉｎａ；２Ｄｅｐａｒｔｍｅｎｔｏｆｃａｒｄｉａｃｓｕｒｇｅｒｙ，ＴｈｅＦｉｒｓｔＡｆｆｉｌｉａｔｅｄＨｏｓｐｉｔａｌｏｆＦｕｊｉａｎＭｅｄｉｃａｌＵｎｉｖｅｒｓｉｔｙ，Ｆｕｚｈｏｕ３５０００５，Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ Ｏｂｊｅｃｔｉｖｅ：Ｔｏｉｎｖｅｓｔｉｇａｔｅｔｈｅｓｌｅｅｐｑｕａｌｉｔｙｏｆｐａｔｉｅｎｔｓｗｉｔｈｐｅｎｉｌｅｅｒｅｃｔｉｌｅｄｙｓｆｕｎｃｔｉｏｎ（ＥＤ），ｅｘｐｌｏｒｅｔｈｅｃｏｒｒｅｌａｔｉｏｎｂｅ ｔｗｅｅｎｓｌｅｅｐｑｕａｌｉｔｙａｎｄｎｏｃｔｕｒｎａｌｐｅｎｉｌｅｄｙｓｆｕｎｃｔｉｏｎ（ＮＰＴ）ｒｅｓｕｌｔｓ，ａｎｄｆｏｒｍｕｌａｔｅｓｃｉｅｎｔｉｆｉｃｎｕｒｓｉｎｇｉｎｔｅｒｖｅｎｔｉｏｎｃｏｕｎｔｅｒｍｅａｓｕｒｅｓ．Ｍｅｔｈｏｄｓ：Ａｔｏｔａｌｏｆ９０ｐａｔｉｅｎｔｓｗｈｏｕｎｄｅｒｗｅｎｔｎｏｃｔｕｒｎａｌｅｒｅｃｔｉｌｅｆｕｎｃｔｉｏｎｍｏｎｉｔｏｒｉｎｇｗｅｒｅｓｅｌｅｃｔｅｄｂｙｃｏｎｖｅｎｉｅｎｃｅｓａｍｐｌｉｎｇ．Ａｆｔｅｒｎｉｇｈｔｔｉｍｅｍｏｎｉｔｏｒｉｎｇ，ｔｈｅＣｈｉｎｅｓｅｖｅｒｓｉｏｎｏｆＲｉｃｈａｒｄｓＣａｍｐｂｅｌｌｓｌｅｅｐｑｕｅｓｔｉｏｎｎａｉｒｅ（ＲＣＳＱ）ｗａｓｕｓｅｄｆｏｒｉｎｖｅｓｔｉｇａｔｉｏｎ．Ｒｅｓｕｌｔｓ：Ｔｈｉｓｓｔｕｄｙｓｈｏｗｅｄｔｈａｔｐａｔｉｅｎｔｓｗｉｔｈｈｉｇｈｓｌｅｅｐｑｕａｌｉｔｙａｃｃｏｕｎｔｅｄｆｏｒ４６．７％（４２／９０），ｇｅｎｅｒａｌｓｌｅｅｐｑｕａｌｉｔｙａｃｃｏｕｎｔｅｄｆｏｒ４０％（３６／９０），ａｎｄｐｏｏｒｓｌｅｅｐｑｕａｌｉｔｙａｃｃｏｕｎｔｅｄｆｏｒ１３．３％（１２／９０）．Ｔｈｅａｖｅｒａｇｅｔｏｔａｌｓｃｏｒｅｏｆｓｌｅｅｐｑｕａｌｉｔｙｗａｓ（６１．８５±２７．７５）．ＴｈｅｄｉｆｆｅｒｅｎｃｅｓｉｎＲＣＳＱｓｌｅｅｐｓｃｏｒｅｓｉｎａｌｌｄｉｍｅｎｓｉｏｎｓｂｅｔｗｅｅｎｔｈｅｎｏｒｍａｌｇｒｏｕｐａｎｄｔｈｅａｂｎｏｒｍａｌｇｒｏｕｐｗｅｒｅｓｔａｔｉｓｔｉｃａｌｌｙｓｉｇｎｉｆｉｃａｎｔ（Ｐ＜０．０５），ｗｈｉｌｅｔｈｅｄｉｆｆｅｒｅｎｃｅｓｉｎｅｎｖｉｒｏｎｍｅｎｔａｌｆａｃｔｏｒｓａｎｄｎｏｉｓｅｗｅｒｅｎｏｔｓｔａｔｉｓｔｉｃａｌｌｙｓｉｇｎｉｆｉｃａｎｔ（Ｐ＞０．０５）．Ｔｈｅｒｅｗａｓａｐｏｓｉ ｔｉｖｅｃｏｒｒｅｌａｔｉｏｎｂｅｔｗｅｅｎｔｈｅｍｏｎｉｔｏｒｉｎｇｒｅｓｕｌｔｓａｎｄＲＣＳＱｓｌｅｅｐｌｅｖｅｌｉｎｔｈｅｔｗｏｇｒｏｕｐｓ（Ｐ＜０．０１，ｒ＝０．３１４）．Ｃｏｎｃｌｕｓｉｏｎ：Ｓｌｅｅｐｑｕａｌｉｔｙｈａｓａｓｉｇｎｉｆｉｃａｎｔｉｍｐａｃｔｏｎｔｈｅｍｏｎｉｔｏｒｉｎｇｒｅｓｕｌｔｓｏｆｎｉｇｈｔｅｒｅｃｔｉｌｅｆｕｎｃｔｉｏｎ，ｓｏｒｅｌｅｖａｎｔｎｕｒｓｉｎｇｍｅａｓｕｒｅｓｓｈｏｕｌｄｂｅｔａｋｅｎｔｏｉｎｔｅｒｖｅｎｅｔｈｅｓｌｅｅｐｑｕａｌｉｔｙｏｆｐａｔｉｅｎｔｓｔｏｏｐｔｉｍｉｚｅｔｈｅｓｌｅｅｐｑｕａｌｉｔｙｏｆｐａｔｉｅｎｔｓ．Ｍｅａｎｗｈｉｌｅ，ｉｔｉｓｓｕｇｇｅｓｔｅｄｔｏｉｍｐｒｏｖｅｔｈｅｅｖａｌｕａｔｉｏｎｏｆｓｌｅｅｐｑｕａｌｉｔｙ，ｗｈｉｃｈｉｓｃｏｎｄｕｃｉｖｅｔｏｈｅｌｐｊｕｄｇｅｔｈｅａｃｃｕｒａｃｙｏｆｍｏｎｉｔｏｒｉｎｇｒｅｓｕｌｔｓｏｆｎｉｇｈｔｅｒｅｃｔｉｌｅｆｕｎｃｔｉｏｎ．Ｋｅｙｗｏｒｄｓ Ｎｏｃｔｕｒｎａｌｐｅｎｉｌｅｔｕｍｅｓｃｅｎｃｅ；Ｓｌｅｅｐｑｕａｌｉｔｙ；Ｐｅｎｉｌｅｅｒｅｃｔｉｌｅｄｙｓｆｕｎｃｔｉｏｎ中图分类号：Ｒ３３８ ６３；Ｒ６９１ ５文献标识码：Ａｄｏｉ：１０．３９６９／ｊ．ｉｓｓｎ．２０９５－７１３０．２０２０．１１．００５ 勃起功能障碍（ＥＤ）是指阴茎持续不能达到和（或）维持足够的勃起，而不能以获得满意的性生活，且时间超过３个月［１］。
碰焊机33EIII控制器说明书
使 用 说 明 书
一、功能简 介
33EIII 说明书
1、恒流/恒压控制方式：控制器通过参数设置可选择恒流或恒压控制方式，对焊接电流/ 电压的采样信号与设定值比较，自动改变触发移相角以达到维持焊接电流/电压恒定的目的。
2、电流/电压显示功能：在恒压控制方式下可直接显示焊接变压器初级电压值；在恒流控 制方式时，采用互感器采样可显示焊接变压器的初级电流值，采用感应线圈采样可显示焊接变 压器的次级电流值。
回火电流值
恒流控制
初级：设置范围 0-999A 次级：设置范围 0-99.9KA
回火电流在工件上持续的时间
维持时间 休止时间 增压延时
0-250 周波 0-250 周波 0-250 周波
电流切断后，电极在工件上继续维持压力的时间，时间到，关闭主气阀 连续焊接时，两次焊接过程间的时间间隔 系统从“加压时间”开始到输出增压信号的时间
A＝互感器量程
B＝0
次级恒流 恒压 恒热量
感应线圈
A=感应线圈量程
B＝1
控制器内部采样，无需
A=000
B=0
外接采样器件
以上均可
以上三种均可
AC=00 AC=00 AC=00 AC=01
说明
电流设定值和显示值为焊接变压器初级电流值，单位 A，范围 0－999A 电流设定值和显示值为焊接变压器次级电流值，单位 KA，范围 0－99.9KA 电流设定值和显示值为焊接变压器初级电压值，单位 V，范围 0－450V 电流设定值为焊接变压器总功率的千分比，设定范 围：0－999‰，显示值为：A、KA 或 V
功耗
≤25W
电网电压自动补偿 当电源电压变化为额定值+15%至-25%时，输出电流变化≤2%
CSE配置文档范例FICO
CSE系统配置文档财务模块目录1. 财务会计配置 (11)1-1.定义公司代码 (11)1-2.定义功能范围 (12)1-3.为准备激活销售会计核算的成本 (13)1-4.在成本中心类别中输入功能区域 (14)1-5. 维护分类帐 (15)1-6. 特殊功能分类帐执行准备 (16)1-7. 编辑科目表清单 (17)1-8. 定义记帐变式 (18)记帐变式 (18)1-9. 定义记帐期间 (19)期间变式 (19)1-10.输入公司代码全球参数 (20)记帐期间变式 (20)1-11. 为非征税事务分配税务代码 (21)1-12. 定义科目组 (22)会计科目表 (22)1-13. 定义凭证类型 (23)1-14. 定义雇员的容差组 (24)1-15. 定义客户、供应商的容差组 (25)1-16. 定义销售及采购税务代码 (26)1-17. 定义税务科目 (27)1-18. 定义留存收益科目 (28)1-19. 定义评估方法 (29)1-20. 准备外币评估的自动过帐 (30)1-21. 定义GR/IR结清的调整科目 (31)1-22. 未清项目的结清 (32)UMBUCHNG (32)1-23. 定义预收款的统驭科目 (33)1-24. 定义预收款请求的统驭科目 (34)1-25. 定义应收汇票的统驭科目 (35)1-26. 定义应付汇票的备选统驭科目 (36)1-27. 定义应收利息的统驭科目 (37)1-28 定义预付款的统驭科目 (38)1-29. 定义预付款请求的统驭科目 (39)1-30 应收应付重分类帐调整 (40)应收款 (40)1-31. 为更改了的统驭科目定义调整科目 (41)1-32. 定义会计报表版本 (42)1-33 复制参考折旧表/折旧范围 (43)1-34. 将折旧表分配至公司代码 (44)公司代码 (44)1-35. 定义屏幕格式 (45)1-36 定义资产分类 (46)1-37 定义资产分类中的折旧范围 (47)1-38定义资产号码范围间隔 (48)1-39. 定义科目确定 (49)1-40 分配总帐科目 (50)1-41. 指定折旧计入总帐间隔和过帐规则 (51)1-42. 定义残值码 (52)1-43. 维护期间控制方法 (53)1-44. 维护折旧码 (54)1-45. 定义资产主数据屏幕格式 (55)1-46 定义、分配在建工程结算配置文件 (56)2.财务会计及管理会计的凭证号码范围 (57)2-1. 定义凭证号范围 (57)2-1. 定义凭证号范围 (58)2-1. 定义凭证号范围 (59)2-2. 维护行项目结算凭证的编号范围 (60)字段值 (61)3.管理会计配置 (62)3－1. 定义成本控制范围 (62)3-2. 把公司代码分配给控制范围 (63)3-3. 维护成本控制范围 (64)3-4. 维护版本 (65)一般版本定义 (65)版本 (65)3-5. 定义成本中心类别 (66)修改视图：成本中心类型 (66)后勤 (66)3-6. 定义成本构成结构 (67)新条目 (67)3-7.建立成本要素缺省设置 (68)3-8. 把成本构成结构分配给公司代码分配、工厂等 (69)设置：组织单位－成本构成格式 (69)3-9. 定义成本核算类型 (70)成本核算类型：01 更新 (70)3-10. 定义估价变式 (71)001计划估价-商品 (71)估价变式 (71)3-11. 定义日期控制 (72)PC01标准成本估算-月 (72)日期控制 (72)核算的起始日期 (72)3-12. 定义数量结构 (73)PPC1标准成本估算(材料) 数量结构 (73)3-13. 定义利润分析码 (74)新项目 (74)000002 (74)3-14. 定义结果分析版本 (75)范围 (75)3-15. 定义评估方法（实际成本） (76)控制范围 (76)3-16. 定义行标识 (77)3-17. 定义分配 (78)3-18. 定义更新 (79)3-19. 定义结算在产品的记帐规则 (80)3-20. 定义差异码 (81)3-21. 定义每一地点的差异码 (82)3-22. 检查差异变式 (83)3-23. 定义在产品和废品的评估变式 (目标成本) (84)3-24. 定义目标成本版本 (85)3-25. 定义差异凭证号码范围 (86)3-26定义结算参数文件 (87)结算参数文件 (87)实际成本/销售成本 (87)将被全部结算 (87)缺省值 (87)分配结构-A1 (87)PA传送结构_A1 (87)分配结构-T1 (87)标识符 (87)100%-有效 (87)有效接收方 (87)成本中心-1 订单-1 (87)成本中心-1 订单-1 (87)其他参数 (87)凭证类型-SA (87)凭证类型-SA (87)3-27. 创建分配结构 (89)3-28. 维护结算凭证编号范围 (90)3-29. 定义订单类型 (91)内部订单：品牌费用（CSE） (91)内部订单：公共事务（CSE） (91)3-30. 维护订单编号范围 (92)订单编号范围 (92)内部订单：品牌费用（CSE） (92)内部订单：公共事务（CSE） (92)3-31. 维护结算参数文件 (93)生产订单 (93)3-32. 维护预算参数文件 (94)内部订单 (控制) (94)3-33. 为预算维护编号范围 (96)号码范围-成本计划和预算 (96)数字范围对象 (96)3-34. 为可用性控制定义容差限制 (97)一般预算参数 (97)++ (97)3 (97)100% (97)RMB (97)3-35. 维护分配结构 (98)CSE其他内部订单分配结构 (98)分配：10所有费用成本控制范围：1000 (98)分配：10市场费用成本控制范围：1000 (98)结算成本要素组：T-SALES (98)分配：10直接材料、成本控制范围：1000 (98)分配：20直接人工、成本控制范围：1000 (98)分配：30机器时间成本成本控制范围：1000 (98)分配：40其他制造成本成本控制范围：1000 (98)3-36. 维护结算参数文件 (99)3-37. 维护结算凭证的编号范围 (100)结算凭证号码范围 (100)3-38. 基金管理-定义全局参数......................................................... 错误！未定义书签。
赛米控丹佛斯电子 SEMiX202GB066HDs 数据表
SEMiX ®2sTrench IGBT ModulesSEMiX202GB066HDsFeatures•Homogeneous Si•Trench = Trenchgate technology •V CE(sat) with positive temperature coefficient•UL recognised file no. E63532Typical Applications*•Matrix Converter •Resonant Inverter•Current Source InverterRemarks•Case temperature limited to T C =125°C max.•Product reliability results are valid for T j =150°C•For short circuit: Soft R Goff recommended•Take care of over-voltage caused by stray inductanceAbsolute Maximum Ratings SymbolConditions Values UnitIGBT V CES T j =25°C 600V I C T j =175°CT c =25°C 274A T c =80°C207A I Cnom 200A I CRMI CRM = 2xI Cnom 400A V GES -20 (20)V t psc V CC =360V V GE ≤ 15V V CES ≤ 600VT j =150°C6µs T j-40...175°C Inverse diode I F T j =175°CT c =25°C 291A T c =80°C 214A I Fnom200A I FRM I FRM = 2xI Fnom400A I FSM t p =10ms, sin 180°, T j =25°C1000A T j -40 (175)°C Module I t(RMS)T terminal =80°C600A T stg -40...125°C V isolAC sinus 50Hz, t =1min4000VCharacteristics SymbolConditions min.typ.max.UnitIGBT V CE(sat)I C =200A V GE =15V chiplevelT j =25°C 1.45 1.85V T j =150°C 1.7 2.1V V CE0T j =25°C 0.91V T j =150°C0.850.9V r CE V GE =15VT j =25°C 2.8 4.3m ΩT j =150°C4.3 6.0m ΩV GE(th)V GE =V CE , I C =3.2mA 55.86.5V I CES V GE =0V V CE =600V T j =25°C 0.150.45mA T j =150°C mA C ies V CE =25V V GE =0Vf =1MHz 12.3nF C oes f =1MHz 0.77nF C res f =1MHz0.37nF Q G V GE =- 8 V...+ 15 V 1600nC R Gint T j =25°C 1.00Ωt d(on)V CC =300V I C =200A V GE =±15V R G on =4.2ΩR G off =4.2ΩT j =150°C 65ns t r T j =150°C 80ns E on T j =150°C 6mJ t d(off)T j =150°C 545ns t f T j =150°C 95ns E off T j =150°C8mJ R th(j-c)per IGBT 0.21K/WCharacteristics SymbolConditionsmin.typ.max.UnitInverse diodeV F = V EC I F =200AV GE =0V chipT j =25°C 1.4 1.60V T j =150°C 1.4 1.6V V F0T j =25°C 0.91 1.1V T j =150°C0.750.850.95V r FT j =25°C 1.5 2.0 2.5m ΩT j =150°C2.32.83.3m ΩI RRM I F =200A di/dt off =3900A/µs V GE =-8VV CC =300VT j =150°C 205A Q rr T j=150°C28µC E rr T j =150°C 6.5mJR th(j-c)per diode0.27K/WModule L CE 18nH R CC'+EE'res., terminal-chip T C =25°C 0.7m ΩT C =125°C1m ΩR th(c-s)per module 0.045K/W M s to heat sink (M5)35Nm M tto terminals (M6)2.55Nm Nmw250gTemperatur Sensor R 100T c =100°C (R 25=5 k Ω)493 ± 5%ΩB 100/125R (T)=R 100exp[B 100/125(1/T-1/T 100)]; T[K];3550 ±2%K SEMiX ® 2sTrench IGBT ModulesSEMiX202GB066HDsFeatures•Homogeneous Si•Trench = Trenchgate technology •V CE(sat) with positive temperature coefficient•UL recognised file no. E63532Typical Applications*•Matrix Converter •Resonant Inverter•Current Source InverterRemarks•Case temperature limited to T C =125°C max.•Product reliability results are valid for T j =150°C•For short circuit: Soft R Goff recommended•Take care of over-voltage caused by stray inductanceFig. 1: Typ. output characteristic, inclusive R CC'+ EE'Fig. 2: Rated current vs. temperature I C = f (T C )Fig. 3: Typ. turn-on /-off energy = f (I C )Fig. 4: Typ. turn-on /-off energy = f (R G )Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristicFig. 7: Typ. switching times vs. I C Fig. 8: Typ. switching times vs. gate resistor R GFig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. R CC'+EE'Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery chargeThis is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX* The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff.。