DF3AA-4S-2DS中文资料

HRS连接器库存清单--精电连接

FH12-40S-0.5SH DF9-19P-1V(22) DF13-6P-1.25H(21) DF13A-40DP-1.25V(59) DF9F-21S-1V(59) DF9-13P-1V(59) FH12-20S-0.5SV DF11-14DP-2V(57) FX8-80S-SV(22) DF13A-15P-1.25H(21) DF13A-8P-1.25H(21) DF3-7P-2V DF3-11P-2V FH12-15S-0.5SH(55) DF9-51P-1V(59) DF12B(3.0)-20DP-0.5V(62) DF28N-150DS-0.4V DF28N-150DP-0.4H FH12-40S-0.5SH(55) FH12-32S-0.5SH(20) DF16B(2.5)-20DP-0.5V DF15(4.2)-50DP-0.65V FX8-120P-SV FH12-36S-0.5SH FH12-14S-0.5SH FH12-33S-0.5SV FH12-6S-0.5SH FH12-32S-0.5SH FH12-32S-0.5SV FH12A-30S-0.5SH DF12B(3.0)-14DP-0.5V DF12E(3.0)-60DP-0.5V(81) FH12-40S-0.5SH FH12-20S-0.5SH(48) DF12-20DS-0.5V FH12-20S-0.5SH FH19S-32S-0.5SH(17) FH12-28S-0.5SH FH12-40S-0.5SV DF12E(3.0)-14DP-0.5V(81) FH19S-17S-0.5SH(05) DF30FC-20DS-0.4V DF30FC-30DS-0.4V FH19-4S-0.5SH
5,000 5,000 26,000 175 1,000 0 250 20,000 0 0 0 554 3,200 1,500 1,000 900 20,000 750 7,800 4,000 4,000 1,000 0 9,500 4,500 3,000 2,000 1,000 550 1,100 20,000 13,000 1,800 4,800 0 1,000 1,500 120 0 4,000 0 1,000 200 500

东方微电 DF-AS-100系列姿态传感器产品说明书

产品说明书Product description 东方微电科技（武汉）有限公司2020.11.24DF-AS-100系列姿态传感器由MEMS 三轴陀螺仪，三轴加速度计，三轴磁传感器等硬件构成。

通过卡尔曼滤波算法和硬磁,软磁倾角补偿算法及多传感器融合算法，可实现俯仰角,横滚角,偏航角等功能计算。

确保系统在严苛的环境下依然能优异得进行姿态测量等功能。

DF-AS-100系列姿态传感器具有精度高、频响快、重复性好、功耗低、体积小等优点，可以广泛应用于航空、航天、航海、水中兵器、石油钻井、车辆导航、姿态系统等需要自主测量三维姿态的产品设备。

DF-AS-100系列采用高性能的微处理器和先进的动力学解算与卡尔曼动态滤波算法，能够快速测量精度。

模块内部集成了姿态解算器，配合动态卡尔曼滤波算法，能够在动态环境下准确输出模块的当前姿态，稳定性极高。

模块内部自带电压稳定电路。

姿态测量稳定度：0.3°（RMS ）横滚,俯仰角分辨率:0.01°横滚,俯仰角精度:0.2°（RMS ）俯仰角测量范围:±85°，横滚角测量范围0°~360°磁参考航向角精度：0.3°（RMS ）带硬磁、软磁及倾角补偿量程：加速度:±16g ，角速度:±2000°/s 。

输出DF-AS-100DF-AS-101DF-AS-103DF-EC-100DF-EC-101角速度,加速度√磁场强度横滚角,俯仰角√无参考航向角√磁参数航向角位置,速度√姿态性能姿态航向参数航向精度≤0.3°（RMS ）分辨率0.01°重复性0.1°姿态倾斜参数俯仰精度0.2°俯仰倾斜范围±85°横滚精度0.2°东方微电科技（武汉）有限公司主要特性性能指标◒校准前提(1)测试姿态传感器精度达不到要求；(2)姿态传感器安装环境有磁场干扰。

DF3-2P-2DS中文资料

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF3 Seriess FeaturesCorrespond to Board Design in Wide Variationq ID Socket(1) Low profile design with the mounting height of 6.8mm(2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series IDtype.(DF11 series represents the 2mm pitch single-row product.Please refer to page A266 to A277.) q Crimp Socket(1) Low profile design with mounting height 7.5mm.(Please refer to the application pattern figure on page A256 for details.)(2) Provide the contact crimping area with the sufficient space, and secures the stable crimpingoperation.q Receptacle(1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header.(2) For horizontal connection, the board to board size is the low profile of 6.6mm.(Please refer to the application pattern on page A256 for details.)(3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle andthe cable side to the plug in the board to cable connection.q Pin Header(1) The board pre-fixed kink is treated with the post pin.(2) The style employs a scoop-proof and sturborn box type.(3) The type corresponding to SMT is avilable, using the heat-proof resin.This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.q In-line Plug(1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel.(2) The in-line adapter is available to insert and in-line the ID socket from both sides.s ApplicationsBusiness equipment such as copy machine and printerNote1: Maximum twice action is allowed under the same condition. However, the interval betweenthe first and second actions must be maintained at room temperature.Note2: The temperature indicates the board surface temperature on the connector lead area.Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds to 0.2mm Based on both connector edges, 0.03mm max. in the connector center portionFlow Condition with Automatic Soldering Tool. Soldering temperature: 250±5ç, Soldering time: Within 3 seconds Manual Soldering Condition. Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds Refer to the "Nylon Connector Use Hand book".Refer to the "Nylon Connector Use Hand book".B Embossed Carrier Tape Dimensionss UL CSA Safety Standard File No.UL :E52653CSA:LR95109s UL CSA Acquisition Objective Item 1DF3-*S-2C2DF3/3A-*P-2DSA/DS 3DF3/DF3AA-*EP-2C 4DF3-*S-2R26/285DF3-*P-2HNote 1: Includes temperature rise caused by current flow.Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range andHumidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.s Materials Product SpecificationsDF 3- *S - 2C q rew t yq Series Name: DFw Series No. : 3, 3A, 3AA e Number of Contacts: 2~15r Connector TypeS: SocketP: Pin Header EP: In-line Plug t Contact Pitch : 2mm y Connection Form/Contact StyleC : Crimp socketR26 : ID socket for AWG26R28 : ID socket for AWG28DSA: Straight through holeDS : Right angle through holeV : Straight SMTH : Right angle SMTA : Adapters Ordering Informationq ConnectorDF3 - EP2428PCFAq rewq Contact Type NONE: For socketEP: For in-line plug w Applicable Wire Size 22: AWG222428: AWG24to 28e Contact Type/Packaging TypeSCF : Socket contact, Embossed tape SC : Socket contact, BagPCF : Plug contact, Embossed tapePC : Plug contact, Bagr Plating TypeBlank: Tin platedA: Gold platedC: Gold platedq Contacts Application patternNote 1.Mark to determine the socket name Mark6: R26, Mark8: R28This picture shows the cable assembled status.s ID Socket[Specific No.]–* *, (* *)Blank : Tin plated, 100 pieces per bag (01) : Gold plated, 100 pieces per bag (20): Tin plated, Tube packagingq AWG26q AWG28productsper bag.Note 3.If the Full automatic IDC machine to hit the DF11 single core,the (20) tube packaging specification will be applied.Note 4.Order the tube packaging product, multiplying the tube packaging quantity (pieces).s Applicable CableThis picture shows the Contact crimped status.s Crimping SocketNote2:The quantity for delivery of the specification No. "None" is determined per bag (100 pcs.).If needed, please order the products per bag.Note3:A quantity of "500 pieces package" and "1000 pieces package" for delivery is dealt with pieces. Order example: 500, 1000, and 1500 pieces...q Board Through-hole Diameter:Ø0.70+0.1s ReceptacleNote1: The product's contact number indicated[Specific No.] –* *, (* *)(20):Tin plated, Tube packaging (50):Gold plated, Tube packaging[Specific No.] –* *, (* *)Blank: 100 pieces per packq Board Through-hole Diameter:Ø0.80+0.1q Kink Pre-fixed Effective Diameter :Ø0.80+0.05s Straight Pin HeaderNote : The quantity for delivery is determined per bag(100 pcs.). If needed, please order the products per bag.Gold Plating543-0179-4543-0180-3543-0181-6543-0182-9543-0183-1543-0184-4543-0185-7543-0186-0543-0187-2543-0188-5543-0189-8543-0190-7543-0191-0543-0192-2Part Number CL No.DF3- 2P-2DS(01)DF3 -3P-2DS(01)DF3- 4P-2DS(01)DF3- 5P-2DS(01)DF3- 6P-2DS(01)DF3- 7P-2DS(01)DF3- 8P-2DS(01)DF3- 9P-2DS(01)DF3-10P-2DS(01)DF3-11P-2DS(01)DF3-12P-2DS(01)DF3-13P-2DS(01)DF3-14P-2DS(01)DF3-15P-2DS(01)543-0031-3-01543-0032-6-01543-0033-9-01543-0034-1-01543-0035-4-01543-0036-7-01543-0037-0-01543-0038-2-01543-0039-5-01543-0040-4-01543-0041-7-01543-0042-0-01543-0043-2-01543-0044-5-01B PCB mounting patterns Straight Pin Header (SMT)[Specific No.] –* *, (* *)(20):Tin plated tube packaging (50):Gold plated tube packagingNote : If a pattern is included in the shaded area and is not treated with resist,it could touch the connector contact.s Right Angle Pin Header (SMT)B PCB mounting pattern B Tube SizeNote2: Please order the emboss packaging product by the reel number. (1 reel : 1000 pcs.)Photo: Contact inserted statuss In-line PlugSpecific No."None" item is delivered per bag (100 pcs.). Please order products per bag unit.Unit: mm11131517192123252729313335370608101214161820222426283032Number of Contacts A B 0204060810121416182022242628C 9.411.413.415.417.419.421.423.425.427.429.431.433.435.4D 6.38.310.312.314.316.318.320.322.324.326.328.330.332.3E[Specific No.] –* *, (* *)Blank : 100 pcs. per bag Note1:Applicable panel thickness is 1.6 to 1.0mm. (However, a slight backlash is considered for the thickness other than 1.6and 1.2mm.)Note2:Use the non-radius surface at the hooking panel edge.Note3:Contact No. indicates 1, 4, 8,12, and 15.[Specific No.] –* *, (* *)Blank: 1 packA263Adapter to in-line by pushing 2 pcs. of socket from both sidesNo.1-No.1 connection circuit types In-line Adapter with Panel LockB Panel Cutouts[Specific No.] –* *, (* *)Blank : 100 pcs. per bagNote1:Applicable panel thickness is 1.6to 1.0mm.(However,backlash will occur except for 1.6, 1.2mm thickness.)Note2:Please use the non-radius surfaceat the hooking panel edge.A264s Crimping Contact for SocketNote : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble.B Applicable Crimping Tool。

东方电机一览目录：单相三相电动机说明书

INDUCTION MOTORSSingle-Phase,Three-Phase40W (1/18.5 HP )Frame Size 3.54 in.sq.(90mm sq.)GEAR SAFETYSTD.temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.●The "U " and "E " at the end of the model name indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate.When the motor is approved under various safety standards, the nameplate is adopted. ●The conduit box type of the motors are not VDE approved.The maximum permissible torque with a decimal gearhead with a gear ratio of 10 is 87 lb-in (10N ·m).Unit = Upper values: lb-in / Lower values: N ·m ⅢGearmotor — Torque Table●Enter the gear ratio in the box (Ⅺ) within the model number. A colored background indicates gear shaft rotation in the same direction as the motor shaft; a white background indicates rotation in the opposite direction.●The speed is calculated by dividing the motor ’s synchronous speed (50 Hz: 1500r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 ϳ20% less than the displayed value, depending on the size of the load.●Right-Angle gearhead may be connected. See page [A-216] for more information on the right-angle gearheads.ⅢDimensions Scale 1/4, Unit = inch (mm)q Motor/GearheadWeight (Mass): 5.5 lb.(2.5 kg)Round Shaft Type5GN ⅪKAWeight (Mass): 5.5 lb.(2.5 kg)Weight (Mass): 3.3 lb.(1.5 kg)5IK40GN-AWU 5IK40GN-CWE 5IK40GN-SW 5IK40GN-AUL5IK40A-AWU5IK40A-CWE 5IK40A-SW 5IK40A-AULAL ϭ1.65(42) 5GN3KA ϳ18KA L ϭ2.36(60) 5GN25KA ϳ180KAWeight (Mass): 5.7 lb.(2.6 kg)Round Shaft Type5GN ⅪKAWeight (Mass): 5.7 lb.(2.6 kg)Weight (Mass): 3.3 lb.(1.5 kg)5IK40GN-AWTU 5IK40GN-CWTE 5IK40GN-SWT5IK40A-AWTU 5IK40A-CWTE 5IK40A-SWTw Motor/Gearhead.3937DIA.5GN ⅪKAWeight (Mass): 6.0 lb.(2.7 kg)Weight (Mass): 3.3 lb.(1.5 kg)5IK40GN-FCH 5IK40GN-ECHe Motor/GearheadL ϭ1.65(42) 5GN3KA ϳ18KA L ϭ2.36(60) 5GN25KA ϳ180KA Use cabtyre cable with the diameter of .24DIA.(␾6)ϳ.47DIA.(␾12).L ϭ1.65(42) 5GN3KA ϳ18KA L ϭ2.36(60) 5GN25KA ϳ180KA MOTOR LEAD WIRE ϫ3GROUND LEAD WIRE ϫ1UL style 3266, AWG20UL style 3266, AWG18Weight (Mass): 6.0 lb.(2.7 kg)Round Shaft Type 5IK40AA-FCH 5IK40AA-ECHWeight (Mass): 5.5 lb.(2.5 kg)Round Shaft Type5IK40AA-SH5GN ⅪKAWeight (Mass): 3.31 lb.(1.5 kg)Weight (Mass): 5.5 lb.(2.5 kg)5IK40GN-SHL ϭ1.65(42) 5GN3KA ϳ18KA L ϭ2.36(60) 5GN25KA ϳ180KA MOTOR LEAD WIRE ϫ3GROUND LEAD WIRE ϫ1UL style 3266, AWG20UL style 3266, AWG18●Decimal Gearhead5GN10XK Weight: 1.32 lb.(0.6 kg)5IK40GN-AUL 5IK40A-AULACH80UL5IK40A-AW ⅪU CH90CFAUL 5IK40GN-CW ⅪE 5IK40A-CW ⅪE CH23BFAUL 1.89(48)(48)1.50(38)0.83(21)(21)0.83(21)1.22(31)(31)1.22(31)1.41 (40)11.41 (40)11.23 (35)2If you need to order a capacitor without a motor, add "-C" to the capacitor model number shown. A capacitor cap is always included with a capacitor.●Capacitor (included with the motor)ⅢRight-Angle GearheadsThe right-angle gearhead provides an output shaft that is at a right angle to the motor ’s output shaft. See page [A-216] for specifications and other information.ⅢAccessoriesⅷMotor Mounting BracketsOptional die-cast aluminum mounting brackets are available. They can be used to install motors with or without gearheads. See page [A-266] for the dimensions.Model name SOL5UAⅷFlexible CouplingOptional clamping couplings are available. See page [A-260] for the dimensions.Change the direction of motor rotation only after bringing the motor to a stop.If an attempt is made to change the direction of rotation while the motor is rotating, the motor may ignore the reversing command or change its direction of rotation after some delay.。

DF简介——精选推荐

DF简介滤波器的过去现在和未来滤波器的发展历程凡是有能⼒进⾏信号处理的装置都可以称为滤波器。

在近代电信设备和各类控制系统中，滤波器应⽤极为⼴泛；在所有的电⼦部件中，使⽤最多，技术最为复杂的要算滤波器了。

滤波器的优劣直接决定产品的优劣，所以，对滤波器的研究和⽣产历来为各国所重视。

1917年美国和德国科学家分别发明了LC滤波器，次年导致了美国第⼀个多路复⽤系统的出现。

20世纪50年代⽆源滤波器⽇趋成熟。

⾃60年代起由于计算机技术、集成⼯艺和材料⼯业的发展，滤波器发展上了⼀个新台阶，并且朝着低功耗、⾼精度、⼩体积、多功能、稳定可靠和价廉⽅向努⼒，其中⼩体积、多功能、⾼精度、稳定可靠成为70年代以后的主攻⽅向。

导致RC 有源滤波器、数字滤波器、开关电容滤波器和电荷转移器等各种滤波器的飞速发展，到70年代后期，上述⼏种滤波器的单⽚集成已被研制出来并得到应⽤。

80年代，致⼒于各类新型滤波器的研究，努⼒提⾼性能并逐渐扩⼤应⽤范围。

90年代⾄现在主要致⼒于把各类滤波器应⽤于各类产品的开发和研制。

当然，对滤波器本⾝的研究仍在不断进⾏。

我国⼴泛使⽤滤波器是50年代后期的事，当时主要⽤于话路滤波和报路滤波。

经过半个世纪的发展，我国滤波器在研制、⽣产和应⽤等⽅⾯已纳⼊国际发展步伐，但由于缺少专门研制机构，集成⼯艺和材料⼯业跟不上来，使得我国许多新型滤波器的研制应⽤与国际发展有⼀段距离。

滤波器的分类滤波器有各种不同的分类，⼀般有如下⼏种。

（1）按处理信号类型分类按处理信号类型分类，可分为模拟滤波器和离散滤波器两⼤类。

其中模拟滤波器⼜可分为有源、⽆源、异类三个分类；离散滤波器⼜可分为数字、取样模拟、混合三个分类。

当然，每个分类⼜可继续分下去，总之，它们的分类可以形成⼀个树形结构，如图所⽰。

实际上有些滤波器很难归于哪⼀类，例如开关电容滤波器既可属于取样模拟滤波器，⼜可属于混合滤波器，还可属于有源滤波器。

因此，我们不必苛求这种“精确”分类，只是让⼈们了解滤波器的⼤体类型，有个总体概念就⾏了。

英飞凌 FF225R65T3E3 XHP 3 模块数据表

XHP ™3 模块采用第三代沟槽栅/场终止IGBT3和第三代发射极控制二极管特性•电气特性-V CES = 6500 V-I C nom = 225 A / I CRM = 450 A -高动态稳定性-低 V CEsat -沟槽栅IGBT3•机械特性-封装的 CTI > 600-加强绝缘封装，10.4kV 交流 60 秒-碳化硅铝 (AlSiC) 基板提供更高的温度循环能力-扩大存储温度范围至 T stg = -55°C -高爬电距离和电气间隙-外壳材料符合EN45545-2 “铁路车辆防火”标准中的 R23 (HL3) 等级可选应用•牵引变流器•中压变流器产品认证•根据 IEC 60747、60749 和 60068标准的相关测试，符合工业应用的要求。

描述FF225R65T3E3XHP ™3 模块内容描述 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1特性 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1可选应用 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1产品认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1内容 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1封装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2IGBT, 逆变器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 3二极管,逆变器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 4特征参数图表 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 5电路拓扑图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 6封装尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 7模块标签代码 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12修订历史 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13免责声明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141封装表 1绝缘参数特征参数代号标注或测试条件数值单位绝缘测试电压V ISOL RMS, f = 50 Hz, t = 60 s10.4kV 局部放电熄弧电压V isol RMS, f = 50 Hz, Q PD typ. 10 pC 5.1kV DC 稳定性V CE(D)T vj=25°C, 100 Fit3800V 模块基板材料AlSiC爬电距离d Creep端子至散热器53.0mm 爬电距离d Creep端子至端子53.0mm 电气间隙d Clear端子至散热器36.0mm 电气间隙d Clear端子至端子26.0mm 相对电痕指数CTI > 600表 2特征值特征参数代号标注或测试条件数值单位最小值典型值最大值杂散电感,模块L sCE25nH 模块引线电阻,端子-芯片R AA'+CC'T C=25°C, 每个开关0.33mΩ模块引线电阻,端子-芯片R CC'+EE'T C=25°C, 每个开关0.42mΩ储存温度T stg-55125°C 模块安装的安装扭距M根据相应的应用手册进行安装M6, 螺丝 4.25 5.75Nm端子安装扭矩M根据相应的应用手册进行安装M3, 螺丝0.9 1.1Nm M8, 螺丝810重量G700g 2IGBT, 逆变器表 3最大标定值特征参数代号标注或测试条件数值单位集电极－发射极电压V CES T vj = -50 °C5900VT vj = 125 °C6500连续集电极直流电流I CDC T vj max = 125 °C T C = 80 °C225A 集电极重复峰值电流I CRM t p受限于 T vj op450A 栅极－发射极峰值电压V GES±20V表 4特征值特征参数代号标注或测试条件数值单位最小值典型值最大值集电极－发射极饱和电压V CE sat I C = 225 A, V GE = 15 V T vj = 25 °C 3.00 3.40VT vj = 125 °C 3.70 4.20栅极阈值电压V GEth I C = 33 mA, V CE = V GE, T vj = 25 °C 5.406 6.60V 栅极电荷Q G V GE = ±15 V, V CE = 3600 V10.5µC 内部栅极电阻R Gint T vj = 25 °C0.67Ω输入电容C ies f = 100 kHz, T vj = 25 °C, V CE = 25 V, V GE = 0 V65.6nF 反向传输电容C res f = 100 kHz, T vj = 25 °C, V CE = 25 V, V GE = 0 V1nF 集电极-发射极截止电流I CES V CE = 6500 V, V GE = 0 V T vj = 25 °C5mA 栅极-发射极漏电流I GES V CE = 0 V, V GE = 20 V, T vj = 25 °C400nA开通延迟时间(感性负载)t don I C = 225 A, V CE = 3600 V,V GE = ±15 V, R Gon = 4.7 ΩT vj = 25 °C0.240µs T vj = 125 °C0.240上升时间(感性负载)t r I C = 225 A, V CE = 3600 V,V GE = ±15 V, R Gon = 4.7 ΩT vj = 25 °C0.070µs T vj = 125 °C0.080关断延迟时间(感性负载)t doff I C = 225 A, V CE = 3600 V,V GE = ±15 V, R Goff = 22 ΩT vj = 25 °C 6.000µs T vj = 125 °C 6.400下降时间(感性负载)t f I C = 225 A, V CE = 3600 V,V GE = ±15 V, R Goff = 22 ΩT vj = 25 °C0.950µs T vj = 125 °C 2.000开通损耗能量 (每脉冲)E on I C = 225 A, V CE = 3600 V,Lσ = 85 nH, V GE = ±15 V,R Gon = 4.7 Ω, di/dt =2200 A/µs (T vj = 125 °C)T vj = 25 °C1230mJ T vj = 125 °C1710关断损耗能量 (每脉冲）E off I C = 225 A, V CE = 3600 V,Lσ = 85 nH, V GE = ±15 V,R Goff = 22 Ω, dv/dt =2100 V/µs (T vj = 125 °C)T vj = 25 °C875mJ T vj = 125 °C1170短路数据I SC V GE≤ 15 V, V CC = 4500 V,V CEmax=V CES-L sCE*di/dt t P≤ 10 µs,T vj=125 °C1300A结－外壳热阻R thJC每个 IGBT29.1K/kW 外壳－散热器热阻R thCH每个 IGBT21.3K/kW 允许开关的温度范围T vj op-50125°C3二极管,逆变器表 5最大标定值特征参数代号标注或测试条件数值单位反向重复峰值电压V RRM T vj = -50 °C5900VT vj = 125 °C6500连续正向直流电流I F225A 正向重复峰值电流I FRM t P = 1 ms450A I2t-值I2t t P = 10 ms, V R = 0 V T vj = 125 °C45.2kA²s 最大损耗功率P RQM T vj = 125 °C1000kW 最小开通时间t onmin10µs表 6特征值特征参数代号标注或测试条件数值单位最小值典型值最大值正向电压V F I F = 225 A, V GE = 0 V T vj = 25 °C 3.10 3.55VT vj = 125 °C 2.85 3.25反向恢复峰值电流I RM V R = 3600 V, I F = 225 A,V GE = -15 V, -di F/dt =2200 A/µs (T vj = 125 °C)T vj = 25 °C405A T vj = 125 °C365恢复电荷Q r V R = 3600 V, I F = 225 A,V GE = -15 V, -di F/dt =2200 A/µs (T vj = 125 °C)T vj = 25 °C255µC T vj = 125 °C505反向恢复损耗（每脉冲）E rec V R = 3600 V, I F = 225 A,V GE = -15 V, -di F/dt =2200 A/µs (T vj = 125 °C)T vj = 25 °C450mJ T vj = 125 °C1070结－外壳热阻R thJC每个二极管51.3K/kW 外壳－散热器热阻R thCH每个二极管24.2K/kW 允许开关的温度范围T vj op-50125°C5电路拓扑图Beispiel: PrimePACK-3+ CostdownCommon Collektorxx.03.2019 mit WW, Jürgen Esch36NTC 9,11,13T23,4D29651T1D187202.08.2021 Beispiel für A.Schulz10: NC图 1FF225R65T3E3XHP ™3 模块5 电路拓扑图6 封装尺寸6封装尺寸图 27 模块标签代码7模块标签代码图 3修订历史修订历史修订版本发布日期变更说明V1.02017-12-19Target datasheetV1.12018-04-17Target datasheetV2.02018-04-23Preliminary datasheetn/a2020-09-01Datasheet migrated to a new system with a new layout and new revisionnumber schema: target or preliminary datasheet = 0.xy; final datasheet =1.xy1.102020-12-111.112022-04-12Final datasheet商标所有参照产品或服务名称和商标均为其各自所有者的财产。

瑞丰瑞丰W40QI35DS -DF-J-Y型号产品说明书

1-8th Floor, Building #1,10th Industrial Zone, Tian Liao Community, Gong Ming Area, Guang Ming栋一至八楼Web/网址：Features 特征PLCC-2 Package.垂直型表贴封装 Extremely wide viewing angle.发光角度大Suitable for all SMT assembly and solder process.适用于所有的SMT 组装和焊接工艺 Available on tape and reel.适用于载带及卷轴 Moisture sensitivity level: 3.防潮等级：3 Package:4000pcs/reel.包装：4000颗/卷RoHS compliant.RoHS 认证Description 描述The White LED which was fabricated using a blue chip and phosphors 白光LED 由芯片激发荧光粉后，混光形成。

Applications 应用Optical indicator.光学指示 Indoor display.室内显示Landscape lighting,lamp belt. 景观照明，灯带等 General use.其他适合的应用Package DimensionNOTES:1.All dimensions units are millimeters. (所有尺寸标注单位为毫米)2.All dimensions tolerances are 0.2mm unless otherwise noted. (除特别标注外，所有尺寸允许公差为±0.2毫米)Electrical / Optical Characteristics at Ts=25°C 电性与光学特性4.The above luminous flux measurement allowance tolerance ±10%. 上述光通量的测试允许公差为±10%.5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. 使用功率不能超过规定的最大值。

HQxxxx-xxx-3AA中文资料

HQ SeriesSPECIFICATIONS STANDARD*SPECIAL ELECTRICALCenter Frequency (Fc)100 to 1000 Mhz80 to 1400 MHz 3dB Relative Bandwidth (% of FC) 4 to 40 4 to 50 Number of Sections Available 3 to 8 2 to 10 Nominal Impedance50 Ohms50 to 75 Ohms Maximum Insertion Loss See Curve See Curve Maximum VSWR 1.5/1 1.3/1 Attenuation in the Stopband See Graph See GraphMaximum Input Power (Average)(Watts to10,000 ft.)500 x 3dB BW (MHz)(Loss Factor)(Fc MHz)See StandardMaximum Input Power (Peak)(Watts to10,000 ft.)300 x 3dB BW (MHz)Fc (MHz)2,000ENVIRONMENTALShock15 G's25 G's Vibration 5 G's10 G's Humidity90% relative100% relativeINSERTION LOSS:The Maximum Insertion Loss at center frequency is equal to :LF x (N + 0.5) / % 3 dB BW + 0.2 Where:LF= Loss Factor, N= Number of Sections% 3dB BW:3dB BW (MHz) x 100divided byCenter Frequency (MHz) Example:A 3 section HQ with a center frequency of 400 MHz and a 3dB BW of 40 MHz would have,1.5 x 3.5 / 10 = 5.25 / 10 = 0.525 0.525 + 0.2 = 0.8 dBConnectors Available on HQ Series:Lark Code Type C DIM.Inches & MMLarkCodeType C DIM.Inches & MMA SMA JACK.800 & 20.3G N JACK 1.625 & 41.3B SMA PLUG.855 & 22.5H N PLUG 1.585 & 40.3C TNC JACK 1.350 & 34.3L SOLDER MPINAXIAL.625 & 15.9D TNC PLUG 1.280 & 32.5*M SOLDER PINRADIAL.625 & 15.9E BNC JACK 1.350 & 34.3S SPECIALF BNC PLUG 1.280 & 32.5*Not recommended for use with this series.LENGTH:The approximate length of a Lark HQ series filter can be determined by the formula:( 0.5 N + 2 / %BW ) x LC = LWhere N is the number of sections used, % BW is:3dB BW (MHz) x 100divided byCENTER FREQUENCY (MHz)LC is the length constant at the specified center frequency, L is the dimension between theconnectors; C1 and C2 are the connector lengths as shown above. All of the length information given here is approximate. Exact length specifications must be quoted by the factory. If a special length is needed,please submit all of your requirements - both electrical and mechanical. This will enable Lark Engineering to quote the optimum design for your application.Example:A 3 section HQ with a center frequency of 400 MHz a 3dB BW of 40 MHz and SMA jack input and output connectors would be:(1.5 + 0.2) x 1.38 = 2.35 + C1 + C2In most cases, the L dimension is rounded to the nearest 1/4 inch which in this instance would be 2.25inches and the O.A.L. is:2.25 + .800 + .800 =3.85 inches.To convert inches to millimeters multiply x 25.40.Lark Engineering HQ SERIES元器件交易网STOPBAND ATTENUATIONThe graph on the following pages defines the normal specification limits on attenuation Lark bandpass filter series HP, HQ, SF, and SM. The minimum level of attenuation in dB is shown as a "number of 3dB bandwidths from center frequency".Since the frequency characteristics vary for differing bandwidths, it is necessary to establishspecifications for each bandwidth of filter. The different graphs represent various 3dB percentage bandwidths. Intermediate values should be interpolated. The 3dB percentage bandwidth is defined asfollows:STOPATT5.HTM元器件交易网As the 3dB bandwidth is exactly 10% of the center frequency, the answer can be read directly from the 10% graph. Using the 5 section curve at the point -1.5 (255 MHz) we find the minimum level of attenuation is 36dB. At +1.6 (348 MHz) the minimum level of attenuation is 48dB.For special requirements, please contact our Application Engineering Department.STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPATT5.HTM元器件交易网STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPBAND ATTENUATION。

HQxxxx-xxx-3AA中文资料

HQ SeriesSPECIFICATIONS STANDARD*SPECIAL ELECTRICALCenter Frequency (Fc)100 to 1000 Mhz80 to 1400 MHz 3dB Relative Bandwidth (% of FC) 4 to 40 4 to 50 Number of Sections Available 3 to 8 2 to 10 Nominal Impedance50 Ohms50 to 75 Ohms Maximum Insertion Loss See Curve See Curve Maximum VSWR 1.5/1 1.3/1 Attenuation in the Stopband See Graph See GraphMaximum Input Power (Average)(Watts to10,000 ft.)500 x 3dB BW (MHz)(Loss Factor)(Fc MHz)See StandardMaximum Input Power (Peak)(Watts to10,000 ft.)300 x 3dB BW (MHz)Fc (MHz)2,000ENVIRONMENTALShock15 G's25 G's Vibration 5 G's10 G's Humidity90% relative100% relativeINSERTION LOSS:The Maximum Insertion Loss at center frequency is equal to :LF x (N + 0.5) / % 3 dB BW + 0.2 Where:LF= Loss Factor, N= Number of Sections% 3dB BW:3dB BW (MHz) x 100divided byCenter Frequency (MHz) Example:A 3 section HQ with a center frequency of 400 MHz and a 3dB BW of 40 MHz would have,1.5 x 3.5 / 10 = 5.25 / 10 = 0.525 0.525 + 0.2 = 0.8 dBConnectors Available on HQ Series:Lark Code Type C DIM.Inches & MMLarkCodeType C DIM.Inches & MMA SMA JACK.800 & 20.3G N JACK 1.625 & 41.3B SMA PLUG.855 & 22.5H N PLUG 1.585 & 40.3C TNC JACK 1.350 & 34.3L SOLDER MPINAXIAL.625 & 15.9D TNC PLUG 1.280 & 32.5*M SOLDER PINRADIAL.625 & 15.9E BNC JACK 1.350 & 34.3S SPECIALF BNC PLUG 1.280 & 32.5*Not recommended for use with this series.LENGTH:The approximate length of a Lark HQ series filter can be determined by the formula:( 0.5 N + 2 / %BW ) x LC = LWhere N is the number of sections used, % BW is:3dB BW (MHz) x 100divided byCENTER FREQUENCY (MHz)LC is the length constant at the specified center frequency, L is the dimension between theconnectors; C1 and C2 are the connector lengths as shown above. All of the length information given here is approximate. Exact length specifications must be quoted by the factory. If a special length is needed,please submit all of your requirements - both electrical and mechanical. This will enable Lark Engineering to quote the optimum design for your application.Example:A 3 section HQ with a center frequency of 400 MHz a 3dB BW of 40 MHz and SMA jack input and output connectors would be:(1.5 + 0.2) x 1.38 = 2.35 + C1 + C2In most cases, the L dimension is rounded to the nearest 1/4 inch which in this instance would be 2.25inches and the O.A.L. is:2.25 + .800 + .800 =3.85 inches.To convert inches to millimeters multiply x 25.40.Lark Engineering HQ SERIES元器件交易网STOPBAND ATTENUATIONThe graph on the following pages defines the normal specification limits on attenuation Lark bandpass filter series HP, HQ, SF, and SM. The minimum level of attenuation in dB is shown as a "number of 3dB bandwidths from center frequency".Since the frequency characteristics vary for differing bandwidths, it is necessary to establishspecifications for each bandwidth of filter. The different graphs represent various 3dB percentage bandwidths. Intermediate values should be interpolated. The 3dB percentage bandwidth is defined asfollows:STOPATT5.HTM元器件交易网As the 3dB bandwidth is exactly 10% of the center frequency, the answer can be read directly from the 10% graph. Using the 5 section curve at the point -1.5 (255 MHz) we find the minimum level of attenuation is 36dB. At +1.6 (348 MHz) the minimum level of attenuation is 48dB.For special requirements, please contact our Application Engineering Department.STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPATT5.HTM元器件交易网STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPBAND ATTENUATION。

DFK 33GP1300 技术手册说明书

技术细节1.要件速览 42.尺寸图 6 2.1DFK 33GP1300 带脚架适配器的C型接口 (6)2.2DFK 33GP1300 不带脚架适配器的C型接口 (7)2.3DFK 33GP1300 带脚架适配器的CS型接口 (8)2.4DFK 33GP1300 不带脚架适配器的CS型接口 (9)3.I/O 连接器 10 3.16-pin I/O 连接器 (10)3.1.1TRIGGER_IN (10)3.1.2STROBE_OUT (11)4.光谱特征 12 4.1红外截止滤波器 (12)4.2光谱灵敏度 - P1300 (12)5.相机控制 13 5.1传感器读出控制 (13)5.1.1像素格式 (13)8-Bit Bayer Raw (13)5.1.1.15.1.1.212-Bit Packed Bayer Raw (14)16-Bit Bayer Raw (14)5.1.1.35.1.1.4YUV 4:2:2 (14)5.1.1.5YUV 4:1:1 (14)5.1.2分辨率 (14)5.1.3读出模式 (15)5.1.4帧速率 (15)5.1.5局部扫描偏移 (17)5.2图像传感器控制 (18)5.2.1曝光时间 (18)5.2.2增益 (18)5.3自动曝光及增益控制 (18)5.3.1自动曝光 (19)5.3.2自动增益 (19)自动参考值 (19)5.3.35.3.4强光缩减 (19)5.3.5自动曝光限制 (20)5.3.6自动增益限制 (20)5.4触发 (21)5.4.1触发模式 (21)5.4.2触发极性 (21)5.4.3软件触发 (22)5.4.4触发脉冲计数 (22)5.4.5触发源 (22)5.4.6触发重叠 (23)5.5触发定时参数 (23)5.5.1触发延迟 (23)5.5.2触发去抖时间 (23)5.5.3触发遮罩时间 (24)5.5.4触发噪声抑制时间 (24)5.6数字I/O (24)5.6.1通用输入 (24)5.6.2通用输出 (25)5.7频闪 (25)5.7.1频闪启用 (25)5.7.2频闪极性 (26)5.7.3频闪操作 (26)5.8白平衡 (26)5.8.1自动白平衡 (26)5.8.2白平衡模式 (27)手动白平衡 (28)5.8.35.9图像处理 (29)5.9.1伽玛 (29)5.9.2查找表 (29)5.10色彩处理 (30)5.10.1色调 (31)5.10.2饱和 (31)5.10.3色彩校正矩阵 (31)5.11自动功能感兴趣的区域 (33)5.11.1自动功能ROI启用 (33)自动功能ROI预设 (34)5.11.25.11.3自动功能ROI自定义矩形 (34)5.12用户设置 (35)5.12.1用户设置选择器 (35)5.12.2加载用户设置 (35)5.12.3保存用户设置 (36)默认用户配置 (36)5.12.46.Rev i s i o n H i story 371要件速览2尺寸图2.1DFK 33GP1300 带脚架适配器的C型接口2.4DFK 33GP1300 不带脚架适配器的CS型接口3I/O 连接器3.16-pin I/O 连接器相机后视图1开极闸M OS F E T最大限制0.2A(ID)!2启动电流最低条件3.5mA!3 G:地O:输出I:输入3.1.1TR IGG ER_I NTRIGGER_IN线可用于将曝光时间的开始与外部事件同步。

三级管选型

用三极管型号参数资料在网上查的电子元件手册都是卖书的广告，找到点参数型号确实不易。

下面是从网上搜到的一些常用三极管型号参数资料。

虽不能涵盖所有的三极管型号，例如3DD系列等，但是都是极其常用的型号，例如901系列，简直是无所不在。

名称封装极性功能耐压电流功率频率配对管D63328NPN音频功放开关100V7A40W达林顿901321NPN低频放大50V0.5A0.625W9012901421NPN低噪放大50V0.1A0.4W150HMZ9015901521PNP低噪放大50V0.1A0.4W150MHZ9014901821NPN高频放大30V0.05A0.4W1000MHZ805021NPN高频放大40V1.5A1W100MHZ8550855021PNP高频放大40V1.5A1W100MHZ80502N222221NPN通用60V0.8A0.5W25／200NS2N23694ANPN开关40V0.5A0.3W800MHZ2N29074ANPN通用60V0.6A0.4W26／70NS2N305512NPN功率放大100V15A115WMJ29552N34406NPN视放开关450V1A1W15MHZ2N66092N377312NPN音频功放开关160V16A50W2N390421ENPN通用60V0.2A2N290621CPNP通用40V0.2A2N2222A21铁NPN高频放大75V0.6A0.625W300MHZ2N671821铁NPN音频功放开关100V2A2W2N540121PNP视频放大160V0.8050三极管引脚图6A0.625W100MHZ2N55512N555121NPN视频放大160V0.6A0.625W100MHZ2N54012N568512NPN音频功放开关60V50A300W2N627712NPN功放开关180V50A250W901221PNP低频放大50V0.5A0.625W90132N667812NPN音频功放开关650V15A175W15MHZ9012贴片PNP低频放大50V0.5A0.625W90133DA87A6NPN视频放大100V0.1A1W3DG6B6NPN通用20V0.02A0.1W150MHZ3DG6C6NPN通用25V0.02A0.1W250MHZ3DG6D6NPN通用30V0.02A0.1W150MHZMPSA4221ENPN电话视频放大300V0.5A0.625WMPSA92MPSA9221EPNP电话视频放大300V0.5A0.625WMPSA42MPS2222A21NPN高频放大75V0.6A0.625W300MHZ9013贴片NPN低频放大50V0.5A0.625W90123DK2B7NPN开关30V0.03A0.2W3DD15D12NPN电源开关300V5A50W3DD102C12NPN电源开关300V5A50W3522V5V稳压管A63428EPNP音频功放开关40V2A10WA7086PNP音频开关80V0.7A0.8WA73321PNP通用50V0.1A180MHZA7414PNP开关20V0.1A70／120NSA78139BPNP开关20V0.2A80／160NSA928ECBPNP通用20V1A0.25WA93321PNP通用50V0.1A140MHZA94028PNP音频功放开关150V贴片三极管型号对照表1.5A25W4MHZC2073 A96621PNP音频激励输出30V1.5A0.9W100MHZC2236A95021PNP通用30V0.8A0.6WA96828PNP音频功放开关160V1.5A25W100MHZC2238A1009BCEPNP功放开关350V2A15WA1220P29PNP音频功放开关120V1.5A20W150MHZA101321PNP视频放大160V1A0.9WC2383A101521PNP通用60V0.1A0.4W8MHZC18152N605012PNP音频功放开关60V12A150W2N605112PNP音频功放开关80V12A150WA1175PNP通用60V0.10A0.25W180MHZA1213贴片PNP超高频50V0.15A80MHZA719ECBPNP通用30V0.50A0.625W200MHZB12G－PNP音频30V0.05A0.05WB1114ECBPNP通用贴片20V2A180MHZB205锗管PNP音频功放开关80V20A80WB1215BCEPNP功放开关贴片120V3A20W130MHZC2946NPN栾生对管25V0.05A200MHZC10446NPN视放45V0.3A2.2GHZC12166NPN高速开关40V0.2AT，20ｎSC1344ECBNPN通用低噪30V0.10230MHZC17336NPN栾生对管30V0.05A2GHZC131721ECBNPN通用30V0.5A0.625W200MHZC54621ECBNPN高放30V0.03A0.15W600MHZC68011NPN音频功放开关200V2A30W20MHZC66512NPN音频功放开关125V5A50W15MHZC4581BCENPN电源开关600V10A65W20MHZC4584BCENPN电源开关1200V6A65W20MHZC4897BCENPN行管1500V20A150WC4928BCENPN行管1500V15A150WC5411BCENPN彩显行管17”1500V14A60WHQ1F3P贴片NPN功放开关20V2A2WTIP13228NPN音频功放开关100V8A70WTIP137A102021PNP音频开关50V2A0.9WA112321PNP低噪放大150V0.05A0.75WA116221DPNP通用贴片50V0.15A0.15WA1216BCEPNP功放开关180V17A200W20MHZC2922A1265BCEPNP功放开关140V10A100W30MHZC3182A1301BCEPNP功放开关160V12A120W30MHZC3280 C3280BCENPN功放开关160V12A120W30MHZA1301 A1302BCEPNP功放开关200V15A120W30MHZC3281 C3281BCENPN功放开关200V15A120W30MHZA1302 A1358BCEPNP120V1A10W120MHZA1444BCEPNP高速电源开关100V15A30W80MHZA1494BCEPNP功放开关200V17A200W20MHZC3858 A1516BCEPNP功放开关180V12A130W25MHZA1668BCEPNP电源开关200V2A25W20MHZA1785BCEPNP驱动120V1A1W140MHZA1941BCEPNP音频功放形状140V10A100WC5198 C5198BCENPN音频功放形状140V10A100WA1941 A1943BCEPNP功放开关230V15AA150WC5200C5200BCENPN功放开关230V15A150WA1943A1988BCEPNP功放开关B449锗管12PNP功放开关50V3.5A22.5WB64721PNP通用120V1A0.9W140MHZD667D66721NPN通用120V1A0.9W140MHZB649B1375BCEPNP音频功放60V3A2W9MHZD40CBCENPN对讲机用40V0.5A40W75MHB688BCEPNP音频功放开关120V8A80WD718B73439BPNP通用60V1A1WD774B64929PNP视放180V1.5A20WD669D66929NPN视频放大180V1.5A20W140MHZB649B66928PNP达林顿功放70V4A40WB67528PNP达林顿功放60V7A40WB67328PNP达林顿功放100V7A40WB631K29PNP音频功放开关120V1A8W130MHZD600K D600K29NPN音频功放开关120V1A8W130MHZB631K C3783BCENPN高压高速开关900V5A100WB140028BPNP达林顿功放120V6A25WD1590B74429PNP音频功放开关70V3A10WB102028PNP功放开关100V7A40WB124039BPNP功放开关40V2A1W100MHZB118528BPNP功放开关60V3A25W70MHZD1762B107930PNP达林顿功放100V20A100WD1559B77229PNP音频功放开关40V3A10WD882B77421PNP通用30V0.1A0.25WB81730PNP音频功放形状160V12A100WD1047B83428PNP功放开关60V3A30WB131654BPNP达林顿功放100V2A10WB1317BCEPNP音频功放180V15A150WD1975B1494BCEPNP达林顿功放120V20A120WD2256B1429BCEPNP功放开关180V15A150WC38021NPN高频放大35V0.03A250MHZC45821NPN通用30V0.1A230MHZC53621NPN通用40V0.1A180MHZ2N660912PNP音频功放开关160V15A150W＞2MHZ2N3773 C3795BCENPN高压高速开关900V5A40WC245821ECBNPN通用低噪50V0.15A0.2WC3030BCENPN开关管900V7A80W.达林顿C3807BCENPN低噪放大30V2A1.2W260MHZC3858BCENPN功放开关200V17A200W20MHZA1494D98529NPN达林顿功放150V±1.5A10WC203629NPN高放低噪80V1A1－4WC206828ENPN视频放大300V0.05A1.5W80MHZC207328NPN功率放大150V1.5A25W4MHZA940C303928NPN电源开关500V7A50WC305812NPN开关管600V30A200WC314828NPN电源开关900V3A40WC315028NPN电源开关900V3A50WC315330NPN电源开关900V6A100WC318230NPN功放开关140V10A100WA1265C319821NPN高频放大60V0.15A0.4W130MHZ3DK4B7NPN开关40V0.8A0.8W3DK7C7NPN开关25V0.05A0.3W3D15D12NPN电源开关300V5A50WC207828NPN音频功放开关80V3A10W150MHZC212021NPN通用30V0.8A0.6WC222821NPN视频放大160V0.05A0.75WC223021NPN视频放大200V0.1A0.8WC223328NPN音频功放开关200V4A40WC223621NPN通用30V1.5A0.9WA966C1733小铁NPN孪生对管30V2GHZC131721EBCNPN通用30V0.5A0.625W200MHZC223828NPN音频功放开关160V1.5A25W100MHZA968C75221NPN通用30V0.1A300MHZC81521NPN通用60V0.2A0.25WC82821NPN通用45V0.05A0.25WC90021NPN低噪放大30V0.03A100MHZC94521NPN通用50V0.1A0.5W250MHZC100821NPN通用80V0.7A0.8W50MHZC116221NPN音频功放35V1.5A10WC121339BNPN监视器专用30V0.5A0.4WC122221NPN低噪放大60V0.1A100MHZC149440ANPN发射36V6APQ=40W175MHZC150728NPN视放300V0.2A15WC167421NPNHF/ZF30V0.02A600MHZC181521NPN通用60V0.15A0.4W8MHZA1015C185521FNPNHF/ZF20V0.02A550MHZC187512NPN彩行1500V3.5A50WC190621NPN高频放大30V0.05A1000MHZC194212NPN彩行1500V3A50WC195921NPN通用30V0.4A0.5W300MHZC197028NPN手机发射40V0.6APQ=1.3W175MHZ C197128ANPN手机发射35V2APQ-7.0W175MHZ C197228ANPN手机发射35V3.5APQ=15W175MHZ C232021NPN通用50V0.2A0.3W200MHZC201221NPN高放30V0.03A200MHZC202712NPN行管1500V5A50WD814BCENPN低噪放大贴片150V0.05A150MHZ C5142BCENPN彩行1500V20A200WD998BCENPN音频功放开关120V10A80W<1/3US D2253BCENPN彩显行管1700V6A50WD11012NPN音频功放开关130V10A100W1MHZ C233528NPN视频功放500V7A40WC237328NPN功放200V7.5A40WC238321NPN视频开关160V1A0.9WA1013C330030NPN音频功放开关100V15A100WC331028CNPN电源开关500V5A40WC332028CNPN电源开头500V15A80WC335521FNPN高频放大20V0.1A6500MHZC335840BNPN高频放大20V0.1A7000MHZC3457BCENPN电源开关1100V3A50WC3460BCENPN电源开关1100V6A100WC3466BCENPN电源开关1200V8A120WC350528BNPN电源开关900V6A80WC3527BCENPN电源开关500V15A100WC3528BCENPN电源开关500V20A150WC3866BCENPN高压高速开关900V3A40WC2443大铁NPN功放开关600V50A400WC248129NPN音频功放开关150V1.5A20WC248221NPN视频放大300V0.1A0.9WC250021NPN通用30V2A0.9W150MHZC259429NPN音频功放开关40V5A10WC261129NPN视频放大300V0.1A1.25WC262530NPN音频功放开关450V10A80WC268229NPNNF/Vid180V0.1A8WC268829NPN视放管300V0.2A10W80MHZC269029NPN音频功放开关120V1.2A20W150MHZA1220P C2751BCENPN电源开关500V15A120WC283730NPN音频功放开关150V10A100WC3873BCENPN高压高速开关500V12A75W30MHZC3886BCENPN开关行管1400V8A50W8MHZC389328BNPN行管1400V8A50W8MHZC390728BNPN功放开关180V12A130W30MHZC359529NPN射频30V0.5A1.2WC4059BCENPN高速开关600V15V130W0.5/2.2USC4106BCENPN电源开关500V7A50W20MHZC4111BCENPN开关行管1500V10A150WC3679BCENPN电源开关900V5A100W6MHZC289828NPN音频功放开关500V8A50WC292243NPN音频功放开关180V17A200W50MHZA1216 C302612NPN开关管1700V5A50WD98629NPN达林顿功放150-80V±1.5A10WC3262BCENPN功放800V10A100WC3264BCENPNＰＡ功放开关230V17A200WB=170A1295 C328030NPN音频功放开关160V12A120WB=100C328130NPN音频功放开关200V15A150W30MHZC3680BCENPN电源开关900V7A120W6MHZC3688BCENPN彩行1500V10A150WC372012NPN彩行1200V10A200WC395329NPN视放120V0.2A1.3W400MHZC398728NPN达林顿50V3A20WC3995BCENPN行管1500V12A180WD102528NPN达林顿功放200V8A50WC3997BCENPN行管1500V15A250WC3998BCENPN行管1500V25A250WC4024BCENPN功放开关100V10A35W24MHZC4038BCENPN门电路50V0.1A0.3W180MHZD1037BCENPN音频功放开关150V30A180WD104730NPN音频功放开关160V12A100WB817C4119BCENPN微波炉开关1500V15A250WC423150CNPN音频功放800V2A30WC4237BCENPN高压高速开关1000V8A120W30MHZC4242BCENPN高压高速开关450V7A40WC4297BCENPN电源开关500V12A75W10MHZC4429BCENPN电源开关1100V8A60WC4517BCENPN音频功放550V3A30W6MHZC4532BCENPN大屏行管1700V10A200WC4582BCENPN电源开关600V15A75W20MHZON4673BCENPNON4873BCENPNC5244BCENPN彩行1700V15A200WC5249BCENPN功放开关600V3A35W6MHZC5250BCENPN开关1000V7A100WC5251BCENPN彩行1500V12A50WD107128NPN达林顿功放300V6A40WC4706BCENPN电源开关900V14A130W6MHZC4382BCENPN功放开关200V2A25W20MHZA1668 C474246NPN彩行1500V6A50WC474546NPN彩行1500V6A50WC474746NPN彩行1500V10A50WC4769BCENPN微机行管1500V7A60WC4913BCENPN大屏视放管2000V0.02A35WC4924BCENPN音频功放800V10A70WC4927BCENPN行管1500V8A50WC4927BCENPNSONY29行管1500V8A50WC4941BCENPN行管1500V6A65W500/380NSC4953BCENPN功放开关500V2A25Wt=300nSC5020BCENPN彩行1000V7A100WC5068BCENPN彩行1500V10A50WC5086BCENPN彩行1500V10A50WC5088BCENPN彩行1500V10A50WC5129BCENPN彩显行管1500V8A50WD1163A28NPN行偏转用350V7A40W60MHZD117512NPN行偏转用1500V5A100WC5132BCENPN彩行1500V16A50WC5144BCENPN大屏彩行1700V20A200WC5148BCENPN大屏彩行1500V8A50WC5149BCENPN高速高频行管1500V8A50WC5198BCENPN功放开关140V10A100WC5200BCENPN功放开关230V15A150WA1943D127328NPN音频功放80V3A40W50MHZC5207BCENPN彩行1500V10A50WC5243BCENPN彩行1700V15A200WC5252BCENPN彩行1500V15A100WC5294BCENPN彩行1500V20Aｔ＝200MSC5296BCENPN开关管带阻1500V8A80WC5297BCENPN开关管1500V16A60WC5331BCENPN大屏彩显行管1500V15A180WD325BCENPN功放开关50V3A25WD38511NPN达林顿功放100V7A30WD40021NPN通用25V1A0.75WD11012NPN音频功放130V10A100W1MHZD130221NPN音频25V0.5A0.5W200MHZD1397BCENPN开关1500V3.5A50W3MHZD1398BCENPN开关1500V5A50W3MHZD1403BCENPN彩行1500V6A120WD40128NPN音频功放开关200V2A20WD41529NPN音频功放开关120V0.8A5WD43821NPN通用500V1A0.75W100MHZD560BCENPN达林顿功放150V5A30WD63739ENPN通用60V0.1A150MHZD66721NPN视频放大120V1A0.9W140MHZB647D1403BCENPN彩行1500V6A120WD1415BCENPN功放电源开关100V7A40W达林顿D71830NPN音频功放开关120V8A80WB668D77439BNPN通用100V1A1WB734D78921NPN音频输出100V1A0.90D814BCENPN低噪放大150V0.05A150MHZD82012NPN彩行1500V5A50WD87012NPN彩行1500V5A50WD88028NPN音频功放开关60V3A10WD88229NPN音频功放开关40V3A30WB772D88428NPN音频三极管c极叫什么极功放开关330V7A40W D89812NPN彩行1500V3A50WD95112NPN彩行1500V3A65WD96521NPN音频40V5A0.75WD96621NPN音频40V5A1WD998BCENPN音频功放120V10A80W<1/3USD633拆28NPN音频功放开关100V7A40W达林顿D143128BNPN彩行1500V5A80WD143328BNPN彩行1500V7A80WD198061BNPN达林顿100V2A10WD1981EBCNPN达林顿100V2A1WD199345BNPN音频低噪55V0.1A0.4WD1416BCENPN功放电源开关80V7A40W达林顿D1427BCENPN彩行1500V5A80W带阻尼BU2525AF30NPN开关功放1500V12A150W350NSD142828BNPN彩行1500V6A80W带阻尼BU2525AX30NPN开关功放1500V12A150W350NSD1439BCENPN彩行1500V3A80WD154128BNPN彩行1500V3A80WD154528BNPN彩行1500V5A50WD1547BCENPN彩行1500V7A80WBU2527AF30NPN开关功放1500V15A150WD1554BCENPN彩行1500V3.5A80WD1555BCENPN彩行1500V5A80WD1556BCENPN彩行1500V6A80WD1559BCENPN达林顿功放100V20A100WB1079D159028NPN达林顿功放150V8A25WD162328BNPN彩行1500V4A70WD1640三极管型号查询29NPN达林顿功放120V2A1.2W D1651SPNPN彩行1500V5A60W3MHZD1710BCENPN彩行1500V5A50WD171828CNPN音频功放180V15A150W20MHZD1762BCENPN音频功放开关60V3A25W90MHZB1185D1843BCENPN低噪放大50V1A1WD184950ANPN彩行1500V7A120WD185050ANPN彩行1500V7A120WD185950ANPN音频80V0.7A1W120MHZD186350ANPN音频120V1A1W100MHZD172429NPN开关120V3A180MHZD187730NPN彩行1500V4A50W带阻尼D187930NPN彩行1500V6A60W带阻尼D188720NPN彩行1500V1070WD193021NPN达林顿100V2A1.2W达林顿D197553ANPN音频功放180V15A150WB1317BU2532AW30NPN开关功放1500V15A150WD197821NPN达林顿120V1.5A0.9WD1994AEBCNPN音频驱动60V1A1WBD23729NPN音频功放100V2A25WBD238BD23829PNP音频功放100V2A25WBD237BU2520AF30NPN开关功放1500V10A150W1/500NSBU2520DF30NPN开关功放1500V10A150W1/500NSBU2520DX30NPN开关功放1500V10A50W600NSBUH515BCENPN行管1500V10A80WBUH515DBCENPN行管1500V10A80WBUS13A12NPN开关功放1贴片三极管型号000V15A175W D199745BNPN激励管40V3A1.5W100MHZD2008EBCNPN音频功放80V1A1.2WD2012BCENPN音频功放60V3A2W3MHZD2136EBCNPN功放80V1A1.2WD215553ANPN音频功放180V15A150WD2253BCENPN彩显行管1700V6A50WD225646NPN达林顿功放120V25A125WB1494D233428BNPN彩行1500V5A80WD2335BCENPN彩行1500V7A100W带阻尼D2349BCENPN大屏彩显行管1500V±10A50WD1959BCENPN彩行1400V10A50WD2374BCENPN功放开关60V3A25W30MHZD2375BCENPN高放大倍数80V3A25W50MHZD2388EBCNPN达林顿90V3A1.2WD2445BCENPN彩行1500V12.5A120WD2498BCENPN彩行1500V6A50WD2588BCENPN点火器用DK55BCENPN开关400V4A60WBC30721aPNP通用50V0.2A0.3WBC327CBEPNP低噪音频50V0.8A0.625WBC337BC33721aNPN音频激励低噪50V0.8A0.625WBC327BC33821aNPN通用激励50V0.8A0.6WBC54621aNPN通用80V0.2A0.5WBC547CBENPN通用50V0.2A0.5W300MHZBD13529NPN音频功放45V1.5A12.5WBD13629PNP音频功放45V1.5A12.5WBD137BD13729NPN音频功放60V1.5A12.5WBD136BD13829PNP音频功放60V1.5A12.5WBD三极管原理139 BD13929PNP音频功放80V1.5A12.5WBD138BUS14A12NPN开关功放1000V30A250WBUT11A28NPN开关功放1000V5A100WBD24328NPN音频功放45V6A65WBD244BD24428PNP音频功放45V6A65WBD243BD68129NPN达林顿功放100V4A40WBD682BD68229PNP达林顿功放100V4A40WBD681BF45829NPN视放250V0.1A10WBU208A12NPN彩行1500V5A12.5WBU208D12NPN彩行1500V5A12.5WBU32328NPN达林顿功放450V10A125WBU40628NPN行管400V7A60WBU508A28NPN行管1500V7.5A75WBU508A28NPN行管1500V7.5A75WBU508D28NPN行管1500V7.5A75WBU80628NPN功放400V8A60WBU932R12NPN功放500V15A150WBUT12A28NPN开关功放450V10A125WBU94112NPN功放开关500V15A175W达林顿BU1508DX28NPN开关功放1500V8A35WBU2506DX30NPN开关功放1500V7A50W600NSBU2508AF30NPN开关功放1500V8A125W600NSBU2508AX30NPN开关功放1500V8A125W600NSBU2508DF30NPN开关功放1500V8A125W600NSBU2508DX30NPN开关功放1500V8A50W600NSBUV2628NPN音频功放开关90V14A65W250NSBU2522AF30NPN开关功放1500V11A150W350NSMJ1502412NPN音频功放开关400V16A250W4MHZMJ15025 MJ1502512PNP音频功放开关400V16A250W4MHZMJ15024 MJE27129PNP达林顿100V2A15W6MHZBUV28A28NPN音频功放开关225V10A65W250NSBUV48A30NPN音频功放开关450V15A150WBUW13A30NPN功放开关1000V15A150WBUX4812NPN功放开关850V15A125WBUX8430NPN功放开关800V2A40WBUX98A12NPN功放开关400V30A210W5MHZDK5528NPN功放开关400V4A65WDTA114PNP10K－10K160V0.6A0.625WDTC143NPN录像机用4.7kHPA100BCENPN大屏彩显行管1500V10A150WHPA150BCENPN大屏彩显行管1500V15A150WHSE830BCEPNP音频功放80V115W1MHZHSE800HSnpn三极管型号E838BCENPN音频功放80V115W1MHZHSE830MN650BCENPN行管1500V6A80WMJ80212NPN音频功放开关90V30A200WMJ4502MJ295512PNP音频功放开关60V15A115WMJ3055MJ305512NPN音频功放开关60V15A115WMJ2955MJ450212PNP音频功放开关90V30A200WMJ802MJ1001212NPN达林顿400V10A175WMJ1001512NPN电源开关400V50A200WMJ1001612NPN电源开关500V50A200WMJ1002512电源开关850V20A250WMJ1103212NPN电源开关120V50A300WMJ11033MJ1103312PNP电源开关120V50A300WMJ11032MJ1333312NPN电源开关400V20A175WMJ1101512PNP铁达林顿500V10AMJ1400312PNP铁MJE34029NPN视放300V0.5A20WMJE350MJE35029PNP视放300V0.5A20WMJE340MJE2955TBCEPNP音频功放开关60V10A75W2MHZMJE3055TMJE3055TBCENPN音频功放开关70V10A75W2MHZMJE2955TMJE5822BCEPNP音频功放开关500V8A80WMJE9730BCENPNMJE1300329NPN功放开关400V1.5A14WMJE1300528NPN功放开关400V4A60WMJE1300728NPN功放开关1500V2.5A60WKSE80028NPN达林顿140V4A20WTIP31CBCENP贴片三极管型号大全N功放开关100V3A40W3MHZTIP32 TIP32CBCEPNP功放开关100V3A40W3MHZTIP31TIP35C30NPN音频功放开关100V25A125W3MHZTIP36TIP36C30PNP音频功放开关100V25A125W3MHZTIP35TIP41C30NPN音频功放开关100V6A65W3MHZTIP42TIP42C30PNP音频功放开关100V6A65W3MHZTIP41TIP10228NPN音频功放开关100V8A2WTIP10528PNP音频功放开关60V15A80W达林顿TIP12228NPN音频功放开关100V5A65WTIP127TIP12728PNP音频功放开关100V5A65WTIP122TIP13728PNP音频功放开关100V8A70WTIP132TIP14230NPN音频功放开关100V10A125WTIP147 TIP142大30NPN音频功放开关100V10A125WTIP147 TIP14730PNP音频功放开关100V10A125WTIP142 TIP147大30PNP音频功放开关100V10A125WTIP142 TIP152BCE电梯用达林顿400V3A65WTL43121电压基准源BT33电压结晶体管UGN3144SGO霍尔开关60MIAL1电磁／微波炉1000V60A300WT30G40BCENPN大功率开关管400V30A300W 560921NPN音频低频放大50V0.8A0.625W5610 561021PNP音频低频放大50V0.8A0.625W5610 962621NPN通用。

菲尼克斯电气开关电源中文样本资料精

62
－MINI电源，12-24 V DC / 24 V DC，12 V DC，48 V DC
63
－MINI电源，48-60 V DC / 24 V DC
65
不间断电源（UPS）
66
高可靠性：输入失效的情况下，缓冲时间20ms以上
QUINT UPS IQ
－24 V DC / 24 V DC
68
可室外安装：宽工作温度范围
易于调试：LED状态指示
压降补偿：输出电压范围可调节
产品目录
电源概述及选型
4
电源
QUINT电源
－1 AC / 24 V DC
34
－3 AC / 24 V DC
36
－1 AC / 12 V DC，48 V DC
38
－3 AC /带喷漆涂层
76
－用于AS-I系统
CN
INTERFACE
11/12
INTERFACE
创新电源 ——系统的可靠保证
创新电源
TNR 5768710/10.2011-01 Printed In China © PHOENIX CONTACT2011
2 PHOENIX CONTACT
INTERFACE电源
QUINT SFB电源 TRIOR电源 MINI电源 STEP电源
－1 AC / 1 AC
70
－电池模块
72
方便接线：采用可插拔带防错编码的COMBICON连接
器(10A)以下
－缓冲模块
73
TRIO UPS
专门设计：三相电源在某一相输入失效时，仍可有效的
工作
－1 AC / 24 V DC
74
MINI UPS

DF59-2S-2V(51);DF59-3S-2V(51);DF59-4S-2V(51);DF59-2P-2C;DF59-3P-2C;中文规格书,Datasheet资料

9.Resistance to soldering No solubility of resin which affect the item’s
heat
performance.
Reflow: Depends on recommended temperature profile. Hand soldering: Soldering iron temperature 350 ± 10ç, 3 sec.
nInsulation resistance 1000Mø min.
nContact resistance 50mø max. (DF59-*P-2FC/SP) 30mø max. (DF59-*P-2C)
Temperature 40 ± 2ç, humidity 90-95%, left for 96 hours
No electrical discontinuity over 1μs.
AC650V / minute. Under 6V DC, must be Measured by 100Ma (DC or 1000Hz) Frequency 10-55Hz, single amplitude 0.75mm, 3 directions, 10 cycles each
5.Shock
No electrical discontinuity over 1μs.
Acceleration 490 m/s2, 11ms; duration, sine half-wave 3 cycles in each of the 3 axis.
6.Humidity 7.Temperature cycle 8. Operating Life
■Applications

DF3-22SC中文资料

qApplicable Wire (Tin Plating Annealed Copper Wire)
Conductor Size (Wire Configuration) AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) AWG 28 (7pcs./0.127mm) Ø0.75 to Ø1.45mm Jacket Diameter
Part Number DF3-22SCF DF3-22SC DF3-2428SCF DF3-2428SC DF3-2428SCFC DF3-248SCC
CL No. 543-0235-3 543-0236-6 543-0001-2 543-0002-5 543-0046-0 543-0047-3
Type Bulk contact Bulk contact Bulk contact 100 pcs. 100 pcs. 100 pcs.
Gold plated
qApplicable Wire (Tin Plating Annealed Copper Wire)
Conductor Size (Wire Configuration) AWG 22 (17pcs./0.16mm) AWG 24 (11pcs./0.16mm) AWG 26 (7pcs./0.16mm) AWG 28 (7pcs./0.127mm) Ø0.75 to Ø1.45mm Jacket Diameter Ø1.2 to Ø1.45mm
sCrimping Contact for In-line Plug
Part Number DF3-EP2428PCF DF3-EP2428PC DF3-EP2428PCFA DF3-EP2428PCA CL No. 543-0062-7 543-0063-0 543-0149-3 543-0150-2 Type Reel contact Bulk contact Reel contact Bulk contact Quantity 10000 pcs. 100 pcs. 10000 pcs. 100 pcs. per reel per pack per reel per pack Gold plated Tin plated Finish

DF-3SGD中文资料

Super Bright Red DE/2SRD,DE/4SRD,DF-3SRD
Super Bright Green DE/2SGD,DE/4SGD,DF-3SGD
6-DE-2-5
Parameter
Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Soldering Temperature [2]
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base.
High Efficiency Red
105 30 150 5
Green
105 25 150 5
Yellow
105 30 150 5
Super Bright Red
100 30 150 5
Super Bright Green Units
105 25 150 5 mW mA mA V
°C °C -40 °C To +85 °C 260 °C For 5 Seconds °C
Typ.
625 565 590 660 565 45 30 35 20 30 12 45 10 95 45 2.0 2.2 2.1 1.85 2.2 10
Max.
Units
Test Conditions
λpeak
Peak Wavelength
nm
IF=20mALeabharlann ∆λ1/2Spectral Line Halfwidth
Package Dimensions

湖南三德科技热值分析系列产品说明书

官方微信官方网站目录SDAC6000(u)量热仪SDACM4000量热仪SDACM3100量热仪SDC712量热仪SDC715量热仪01-05热值分析系列020*********-11元素分析系列SDCHN536碳氢氮元素分析仪SDCH536红外碳氢仪SDH536红外测氢仪SDS350红外定硫仪SDS820自动定硫仪SDS720自动定硫仪SDS-V 定硫仪SDFCl3000自动氟氯分析仪SDFCl1000(a)氟氯分析仪070707080909101111SDTGA8000(a)工业分析仪SDTGA6000工业分析仪SDTGA6000A 工业分析仪SDTGA6000V 工业分析仪SDTGA5000a 工业分析仪SDTGA520(a)水分测试仪SDTGA500光波水分测试仪SDIMF200智能马弗炉SDMF300马弗炉SDIDB413智能干燥箱SDDH315通氮鼓风干燥箱SDDH323鼓风干燥箱SDDH313鼓风干燥箱SDDH306鼓风干燥箱12-22成分分析系列1314151516171819202121222222SDAF105（a /b ）灰熔融性测试仪SDAF4000灰熔融性测试仪SDHG60a 哈氏可磨性指数测定仪23-26物理特性分析系列242526S DUC3150（D ）联合制样机S DHD150t 锤式破碎缩分机S DHC锤式破碎机S DJC颚式破碎机S DRC对辊破碎机S DHCW400×260湿煤破碎机S DPP制样粉碎机S DMD16自动机械缩分器S DNS300环保振筛机S DNS200a标准振筛机S DRD二分器采制样辅助工具30-38样品制备系列313232333334343535353637-38激光盘料仪系列SDLM200便携式激光盘料仪SDLM1250固定式激光盘料仪39-41404142-43公司简介44发展历程45运维服务2829S DVD25风透式快速除湿干燥系统S DVD3mm 风透干燥机27-29风透式低温快速除湿干燥系列热值分析系列适用范围符合标准GB/T213-2008GB/T384-1981 GB/T30727-2014ASTM D5865-2007ISO 1928-2009 JC/T1005-2006《煤的发热量测定方法》《石油产品热值测定法》《固体生物质燃料发热量测定方法》《煤与焦炭总热值的标准试验方法》《固体矿物燃料-氧弹式量热计测定总值并计算净热值》《水泥黑生料发热量测定方法》三德科技是中国第一台自动量热仪(1996年)的发明者，先后自主研发出6代量热仪，缔造了2个“国家重点新产品”。

S2AA-T3资料

S2AA – S2MA2.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODECharacteristicSymbol S2AAS2BAS2DAS2GAS2JAS2KAS2MAUnitPeak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRMV RWM V R 501002004006008001000V RMS Reverse VoltageV R(RMS)3570140280420560700V Average Rectified Output Current @T L = 110°C I O 2.0A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method)I FSM 60A Forward Voltage @I F = 2.0A V FM 1.10V Peak Reverse Current @T A = 25°C At Rated DC Blocking Voltage @T A = 125°C I RM 5.0200µA Reverse Recovery Time (Note 1)t rr 2.5µS Typical Junction Capacitance (Note 2)C j 30pF Typical Thermal Resistance (Note 3)R JL 16°C/W Operating and Storage Temperature RangeT j, T STG-55 to +150°CNote: 1. Measured with I F = 0.5A, I R = 1.0A, I rr = 0.25A,2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.3. Mounted on P .C. Board with 8.0mm 2 land area.WTE0.51.01.52.02.520406080100120140160T ,LEADTEMPERATURE (ºC)Fig.1Forward Current Derating CurveL I ,A V E R A G E F O R W A R D C U R R E N T (A )AV 0.010.11.010100100020406080100120140I ,I N S T A N T A N E O U S R E V E R S E C U R R E N T (A )R PERCENT OF RATED PEAK REVERSE VOLTAGE (%)Fig.4T ypical Reverse Characteristics102030405060110100I , P E A K F O R W A R D S U R G E C U R R E N T (A )F S M NUMBER OF CYCLES AT 60HzFig.3 ForwardSurge Current Derating CurveI ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A )F0.010.11.0100.50.70.91.1 1.3 1.5V ,INSTANTANEOUS FORWARD VOLTAGE (V)Fig. 2 T ypical Forward CharacteristicsFMARKING INFORMATION RECOMMENDED FOOTPRINTPACKAGING INFORMATIONORDERING INFORMATIONProduct No.Package TypeShipping QuantityS2AA-T3 SMA 7500/Tape & Reel S2BA-T3 SMA 7500/Tape & Reel S2DA-T3 SMA 7500/Tape & Reel S2GA-T3 SMA 7500/Tape & Reel S2JA-T3 SMA 7500/Tape & Reel S2KA-T3 SMA 7500/Tape & Reel S2MA-T3SMA7500/Tape & Reel1. Shipping quantity given is for minimum packing quantity only. For minimumorder quantity, please consult the Sales Department.2.To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, S2AA-T3-LF .Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice.WARNING : DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval.We power your everyday.Won-Top Electronics Co., Ltd.No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417Email: sales@Internet: 。

HRS连接器库存清单--精电连接

东方微电 DF-AS-100系列姿态传感器 产品说明书

DF3-2P-2DS中文资料

东方电机一览目录：单相三相电动机说明书

DF简介——精选推荐

英飞凌 FF225R65T3E3 XHP 3 模块 数据表

瑞丰瑞丰W40QI35DS -DF-J-Y型号产品说明书

HQxxxx-xxx-3AA中文资料

HQxxxx-xxx-3AA中文资料

DFK 33GP1300 技术手册说明书

三级管选型

菲尼克斯电气开关电源中文样本资料精

DF59-2S-2V(51);DF59-3S-2V(51);DF59-4S-2V(51);DF59-2P-2C;DF59-3P-2C;中文规格书,Datasheet资料

DF3-22SC中文资料

DF-3SGD中文资料

湖南三德科技热值分析系列产品说明书

S2AA-T3资料

东方微电 DF-AS-100系列姿态传感器产品说明书

英飞凌 FF225R65T3E3 XHP 3 模块数据表