M134-1062-02-16中文资料
维沙亚高抗性 高压金属玻璃带领导电阻说明书
VR25000003303JA 100VR37000003904JA100VR25000008204JA100VR37000002005FA100VR37000002204FA100VR25, VR37, VR68Vishay BCcomponentsHigh Ohmic / High Voltage Metal Glaze Leaded ResistorsDESIGN SUPPORT TOOLSA metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps. The resistors are coated with a light blue lacquer which provides electrical, mechanical, and climatic protection.FEATURES•UL Approved (UL1676, file no: E171160)•Meet the safety requirements of:-IEC 60065-DIN EN 60065-VDE 0860-CQC (China)•AEC-Q200 qualified (VR25, VR37)•High pulse loading capability (maximum 10 kV)•Radial version available for VR25•Material categorization: for definitions of compliance please see /doc?99912APPLICATIONS•Where high resistance, high stability, and high reliability at high voltage are required •High humidity environment •White goods •Power supplies •Automotive electronicsNote(1)Ohmic values (other than resistance range) are available on requestTECHNICAL SPECIFICATIONSDESCRIPTION VR25VR37VR68Imperial size 020*********Resistance range (1)100 k Ω to 22 M Ω100 k Ω to 33 M Ω100 k Ω to 68 M ΩResistance tolerance ± 10 %; ± 5 %; ± 1 %Temperature coefficient ≤ ± 200 ppm/KRated dissipation, P 700.25 W 0.5 W 1.0 W Operating voltage, U max. AC/DC 1600 V 3500 V 10 000 V Operating temperature range -55 °C to +155 °CPeak permissible film temperature 155 °C Thermal resistance (R th )140 K/W 120 K/W70 K/W Insulation voltage:1 min.; U ins700 V Maximum noise (white noise)5 μV/V 2.5 μV/V 2.5 μV/V Max. resistance change atrated dissipation for resistance range, |∆R /R | max., after 1000 h1.5 %1.5 %1.5 %SAFETY REQUIREMENTS AND QUALIFICATIONSDESCRIPTIONVR25, VR37VR37VR68Safety requirements / qualifications AEC-Q200UL1676 qualification (file no: E171160)for ohmic range 510 k Ω to 11 M Ω;DIN EN 60065 (VDE 0860): 2015; clause 14.2 a);EN 60065: 2014IEC 60065: clause 14.2 a)CQCVR25, VR37, VR68Vishay BCcomponentsNote(1)See table “Temperature Coefficient and Resistance Range” for selecting correct ohmic value - tolerance combinationTEMPERATURE COEFFICIENT AND RESISTANCE RANGETYPE TCRTOLERANCERESISTANCE E-SERIES VR25≤ ± 200 ppm/K± 1 %100 k Ω to 15 M ΩE24; E96± 5 %100 k Ω to 22 M ΩE24; E96± 10 %15 M Ω to 22 M ΩE24VR37± 1 %100 k Ω to 33 M ΩE24; E96± 5 %100 k Ω to 33 M ΩE24VR68± 1 %100 k Ω to 68 M ΩE24; E96± 5 %100 k Ω to 68 M ΩE24PART NUMBER AND PRODUCT DESCRIPTIONPART NUMBER: VR25000001003FA100TYPE / SIZE VARIANT TCR RESISTANCE TOLERANCE (1)PACKAGINGSPECIAL VR25000 = VR25VR37000 = VR37VR68000 = VR680 = neutral0 = standard3 digit value 1 digit multiplier MULTIPLIER 0 = *1001 = *1012 = *1023 = *1034 = *1045 = *1056 = *106F = ± 1 %J = ± 5 %K = ± 10 %A1AC A5RD R5N400 = standardPRODUCT DESCRIPTION: VR25 1 % A1 100KVR25 1 %A1100K TYPE / SIZETOLERANCE PACKAGINGRESISTANCE VR25VR37VR68± 1 %± 5 %± 10 %A1AC A5RD R5N4100K = 100 k Ω15M = 15 M ΩPACKAGINGTYPECODE QUANTITY PACKAGING STYLEWIDTH PITCH DIMENSIONS VR25A11000Taped according to IEC 60286-1 fan-folded in a box 53 mm 5 mm 75 mm x 31 mm x 260 mm A5500053 mm 5 mm 76 mm x 105 mm x 265 mm N44000Taped according to IEC 60286-2 fan-folded in a box-12.7 mm 48 mm x 253 mm x 330 mm R55000Taped according to IEC 60286-1 on a reel 53 mm 5 mm 93 mm x 300 mm x 298 mm VR37A11000Taped according to IEC 60286-1 fan-folded in a box53 mm 5 mm 72 mm x 60 mm x 258 mm R55000Taped according to IEC 60286-1 on a reel 53 mm 5 mm 90 mm x 375 mm x 375 mm VR68AC 500Taped according to IEC 60286-1 fan-folded in a box66 mm 10 mm 82 mm x 111 mm x 256 mm RD750Taped according to IEC 60286-1 on a reel66 mm10 mm105 mm x 315 mm x 305 mmV R 5000001003F A 1002VR25, VR37, VR68 Vishay BCcomponentsDESCRIPTIONProduction is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature coefficient. Plated steel termination caps are firmly pressed on the metalized rods. Mostly, a special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistor elements are covered by a light blue protective coating designed for electrical, mechanical, and climatic protection. Four or five color code rings designate the resistance value and tolerance in accordance with IEC 60062.Yellow and gray are used instead of gold and silver because metal particles in the lacquer could affect high-voltage properties.The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1 or for the radial versions in accordance to IEC 60286-2.MATERIALSVishay acknowledges the following systems for the regulation of hazardous substances:•IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (1)•The G lobal Automotive Declarable Substance List (GADSL) (2)•The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (3) for its supply chainThe products do not contain any of the banned substances as per IEC 62474, G ADSL, or the SVHC list, see /how/leadfree.Hence the products fully comply with the following directives:•2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II)•2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU•2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE)Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at /doc?49037.ASSEMBLYThe resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping.The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth, in compliance with IEC 60068-2-82, has been proven under extensive testing. The encapsulant is resistant to cleaning solvent specified in IEC 60115-1. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system.APPROVALSThese resistors meet the safety requirements of:•UL1676 (510 kΩ to 11 MΩ); file no: E171160•IEC 60065, clause 14.2 a)•DIN EN 60065, clause 14.2 a)•VDE 0860, clause 14.2 a)•CQC, ChinaRELATED PRODUCTSFor a correlated range of Metal Film Resistors see the datasheet:“High Ohmic / High Voltage Metal Film Leaded Resistors”, /doc?30260For product that offers high power dissipation and metal oxide film technology see the datasheet:“High Power Metal Oxide Leaded Resistors”,/doc?20128Notes(1)The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474(2)The G lobal Automotive Declarable Substance List (G ADSL) is maintained by the American Chemistry Council, and available atVR25, VR37, VR68Vishay BCcomponentsFUNCTIONAL PERFORMANCEDeratingHot-Spot Temperature Rise ( T) as a Function of Dissipated PowerVR25VR37VR25, VR37, VR68 Vishay BCcomponentsMaximum allowed peak pulse voltage in accordance with IEC 60065, 14.2 a);50 discharges from a 1nF capacitor charged to Ûmax.; 12 discharges/min (drift ∆R/R≤ 2 %)VR25VR37VR25, VR37, VR68 Vishay BCcomponentsTemperature Rise ( T) at the Lead End (Soldering Point) as a Function of Dissipated Power at Various Lead Lengths after MountingVR25VR37VR25, VR37, VR68Vishay BCcomponentsTESTS PROCEDURES AND REQUIREMENTSAll tests are carried out in accordance with the following specifications:•IEC 60115-1, generic specification (includes tests)The test and requirements table contains only the most important tests. For the full test schedule refer to the documents listed above.The tests are carried out with reference to IEC 60115-1, in accordance with IEC 60068-2-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3.A climatic category 55 / 155 / 56 is applied, defined by the lower category temperature (LCT = -55 °C), the upper category temperature (UCT = 155 °C), and the duration of exposure in the damp heat, steady state test (56 days).Unless otherwise specified the following values apply:•Temperature: 15 °C to 35 °C •Relative humidity: 45 % to 75 %•Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).For performing some of the tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31.In test procedures and requirements table, only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given.TESTS PROCEDURES AND REQUIREMENTSIEC 60115-1 CLAUSE IEC 60068-2TEST METHOD TESTPROCEDUREREQUIREMENTS PERMISSIBLE CHANGE(∆R max.)4.6.1.1Insulation resistanceU max. DC = 500 V during 1 min; V-block methodR ins min.: 10 000 M Ω4.7Voltage proof U RMS = U ins ; 60 sNo breakdown or flashover4.8Temperature coefficientAt (20 / -55 / 20) °C and (20 / 155 / 20) °C≤ ± 200 ppm/K 4.12NoiseIEC 60195VR25: max. 5 μV/V VR37: max. 2.5 μV/V VR68: max. 2.5 μV/V 4.13Short time overload Room temperature; 2.5 x ;(voltage not more than 2 x limiting voltage);10 cycles; 5 s ON and 45 s OFF∆R max.: ± 2 % R 4.1621 (Ua1)21 (Ub)21 (Uc)Robustness of terminationsTensile, bending, and torsionNo damage ∆R max.: ± 0.5 % R4.1720 (Ta)Solderability+235 °C; 2 s; solder bath method; SnPb40+245 °C; 3 s; solder bath method; SnAg3Cu0.5(before aging)Good tinning (≥ 95 % covered);no damage+235 °C; 2 s; solder bath method; SnPb40+245 °C; 3 s; solder bath method; SnAg3Cu0.5(after aging)Good tinning (≥ 95 % covered);no damage4.1820 (Tb)Resistance to soldering heat Unmounted components (260 ± 5) °C; (10 ± 1) s∆R max.: ± 0.5 % R 4.1914 (Na)Rapid change of temperature30 min at -55 °C and 30 min at +155 °C;5 cycles ∆R max.: ± 0.5 % R 4.2029 (Eb)Bump 3 x 1500 bumps in 3 directions; 40 g No damage ∆R max.: ± 0.5 % R 4.226 (Fc)Vibration 10 sweep cycles per direction;10 Hz to 2000 Hz;1.5 mm or 200 m/s 2No damage ∆R max.: ± 0.5 % R4.23Climatic sequence:R ins min.: 1 G Ω∆R max.: ± 1.5 % R4.23.2 2 (Bb)Dry heat 16 h; 155 °C 4.23.330 (Db)Damp heat cyclic 24 h; 25 °C to 55 °C;90 % to 100 % RH4.23.4 1 (Ab)Cold 2 h; -55 °C 4.23.513 (M)Low air pressure 2 h; 8.5 kPa;15 °C to 35 °C4.23.630 (Db)Damp heat remaining cyclic5 days; 55 °C;95 % to 100 % RH; 5 cycles P 70 x RVR25, VR37, VR68Vishay BCcomponentsDIMENSIONSVR25 WITH RADIAL TAPINGLead Spacing (F = 4.8 mm), Size 02074.2478 (Cab)Damp heat(steady state)56 days; 40 °C;90 % to 95 % RH; loaded with 0.01 P 70(steps: 0 V to 100 V)∆R max.: ± 1.5 % R 4.25.1Endurance (at 70 °C)1000 h; loaded with P 70 or U max.;1.5 h ON and 0.5 h OFF ∆R max.: ± 1.5 % R 4.26Active flammability “cheese-cloth test”Steps of:5 / 10 / 16 / 25 / 40 x P 70 duration 5 minVR25: no flaming of gauze cylinder VR68: no flaming of gauze cylinder 4.35Passive flammability “needle-flame test”Application of test flame for 20 sNo ignition of product;no ignition of under-layer;burning time less than 30 sDIMENSIONS - Leaded resistor types, mass, and relevant physical dimensionsTYPE Ø D max. (mm)L 1 max. (mm)L 2 max. (mm)Ø d (mm)MASS (mg)VR25 2.5 6.57.50.58 ± 0.05212VR37 4.09.010.00.70 ± 0.03457VR686.818.019.00.78 ± 0.051690TESTS PROCEDURES AND REQUIREMENTSIEC 60115-1 CLAUSE IEC 60068-2TEST METHOD TEST PROCEDUREREQUIREMENTS PERMISSIBLE CHANGE(∆R max.)L dDIMENSIONS in millimetersPitch of components P 12.7 ± 1.0Lead spacing F 4.8 + 0.7 / - 0.0Width of carrier tape W 18.0 ± 0.5Body to hole centerH 19.5 ± 1.0Height for cutting (max.)L 11Height for bending H 016.5 ± 0.5Component height (max.)H 129VR25, VR37, VR68 Vishay BCcomponentsHISTORICAL 12NC INFORMATION•The resistors have a 12-digit numeric code starting with -2322 241 refers to VR25-2322 242 refers to VR37-2322 244 refers to VR68•The subsequent first digit for 1 % tolerance products (E24 and E96 series) or 2 digits for 5 % (E24 series) and 10 % (E12 series) indicate the resistor type and packing•The remaining digits indicate the resistance value:-The first 3 digits for 1 % or 2 digits for 5 % and 10 % tolerance products indicate the resistance value-The last digit indicates the resistance decadeLast Digit of 12NC Indicating Resistance DecadeHistorical 12NC Example•The 12NC for a VR25, resistor value 7.5 MΩ, 5 % tolerance, supplied on a bandoleer of 1000 units in ammopack, is: 2322 241 13755.•The 12NC for a VR37, resistor value 7.5 MΩ, 5 % tolerance, supplied on a bandoleer of 1000 units in ammopack, is: 2322 242 13755.•The 12NC for a VR68, resistor value 7.5 MΩ, 5 % tolerance, supplied on a bandoleer of 500 units in ammopack, is: 2322 244 13755.RESISTANCE DECADE LAST DIGIT100 kΩ to 976 kΩ41 MΩ to 9.76 MΩ5≥ 10 MΩ612NC CODING FOR VR25, VR37, VR68 - Resistor type and packagingTYPE TOLERANCE(%)VR25 CODING STARTS WITH 2322 241 .....VR37 CODING STARTS WITH 2322 242 .....VR68 CODING STARTS WITH 2322 244 .....BANDOLIER IN AMMOPACK BANDOLIER ON REEL RADIAL TAPED STRAIGHT LEADS4000 UNITS52 mm52 mm66.7 mm52 mm66.7 mm1000 UNITS5000 UNITS500 UNITS5000 UNITS750 UNITSVR25± 10....8....7....- 6....-± 536...13...53...-23...-± 1038...12...52...-22...-VR37± 1-8....-- 6....-± 5-13...--23...-VR68± 1---8....- 6....± 5---13...-23...Legal Disclaimer Notice VishayDisclaimerALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.V ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein.Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVEDRevision: 01-Jan-20221Document Number: 91000VR68000001003JA C00VR68000001504JA C00VR25000003303JA 100VR37000003904JA100VR25000008204JA100VR37000002005FA100VR37000002204FA100。
1123343-1中文资料
1123343-1 Product DetailsHome | Customer Support | Suppliers | Site Map | Privacy Policy | Browser Support© 2008 Tyco Electronics Corporation All Rights Reserved SearchProducts Documentation Resources My Account Customer Support Home > Products > By Type > Product Feature Selector > Product Details1123343-1Active MULTILOCK Connectors and ContactsAlways EU RoHS/ELV Compliant (Statement of Compliance)Product Highlights:?Contact?Terminate To Wire?Receptacle?Wire Range = 0.20-0.60²[24-20] mm[AWG]?Insulation Diameter = .95 -1.70 mmView all Features | Find SimilarProductsCheck Pricing &AvailabilitySearch for ToolingProduct FeatureSelectorContact Us AboutThis ProductQuick LinksDocumentation & Additional InformationDocuments are temporarily unavailable. We are working hard to correct the problem. Please try again later.Additional Information:?Product Line InformationRelated Products:?ToolingProduct Features (Please use the Product Drawing for all design activity)Product Type Features:?Product Type = Contact?Tab/Receptacle = Receptacle?Insulation Diameter (mm [in]) = 0.95 – 1.70[0.037 –0.067]?Proprietary Name = MULTILOCK?Product Series = .025 SeriesBody Related Features:?Wire Range (mm [AWG]) = 0.20-0.60²[24-20] Contact Related Features:?Contact Material = Copper Alloy?Contact Mating Area Plating Material = Pre-Tin Industry Standards:?RoHS/ELV Compliance = RoHS compliant, ELVcompliant?Lead Free Solder Processes = Wave soldercapable to 240°C?RoHS/ELV Compliance History = Always wasRoHS compliantConditions for Usage:?Terminate To = WirePackaging Related Features:?Packaging Method = StripOther:?Brand = AMPProvide Website Feedback | Contact Customer Support。
13014硝化纤维
公布《危险化学品名录》（2002版）国家安全生产监督管理局公告2003年第1号根据《危险化学品安全管理条例》（国务院令第344号）和《危险化学品登记管理办法》（国家经贸委令35号）的规定，《危险化学品名录》（2002版）已经2003年2月24日国家安全生产监督管理局局务会议审议通过，现予公布。
二〇〇三年三月三日危险化学品名录（2002版）本表说明：1、请按Ctrl+F组合键进行快速查阅。
2、本表只供危险化学品名录数据的参考查阅使用；具体查阅请以国家正式书面文件为准。
3、本表数据采集自《危险化学品名录（2002版）》。
4、《名录》全文刊于《国家安全生产监督管理局（国家煤矿安全监察局）公告2003年增刊）。
5、因本表数据的疏漏、错失而引起的相关经济法律等问题，本办公室不负任何责任。
6、本表最后更新于2003-07-16 08:36危险货物编号名称别名 UN号第1类 爆炸品第1项 具有整体爆炸危险的物质和物品11018 迭氮(化)钡[干的或含水＜50%]022411019 迭氮(化)铅[含水或水加乙醇≥20%]012911020 重氮甲烷11021 二硝基重氮酚[含水或水加乙醇≥40%]重氮二硝基苯酚007411022 三硝基间苯二酚铅[含水或水加乙醇≥20%]收敛酸铅013011023 脒基亚硝氨基脒基叉肼[含水≥30%]011311024 脒基亚硝氨基脒基四氮烯[含水或水加乙醇≥30%]四氮烯;特屈拉辛011411025 雷(酸)汞[含水或水加乙醇≥20%]0135 11026 高氯酸[浓度＞72%]11027 硝基胍[干的或含水＜20%]橄苦岩028211028 硝基脲 0147 11029 硝基脲[干的或含水＜20%] 0220 11030 硝酸重氮苯11031 硝化淀粉[干的或含水＜20%]014611032 硝化纤维素[干的或含水(或乙醇)＜25%]034011032 硝化纤维素[含增塑剂＜18%]034111033 硝化丙三醇[含不挥发、不溶于水的钝感剂≥40%]硝化甘油;甘油三硝酸酯014311034 硝化丙三醇乙醇溶液[含硝化甘油1%～10%]硝化甘油乙醇溶液014411035 2,4,6-三硝基甲苯[干的或含水＜30%]梯恩梯(TNT) 020911036 2,4,6-三硝基甲苯与铝混合物特里托纳尔039011037 三硝基甲苯与三硝基苯混合物038811037 三硝基甲苯与六硝基-1,2-二苯乙烯混合物三硝基甲苯与六硝基芪混合物038811038 三硝基甲苯与三硝基苯和六硝基-1,2-二苯乙烯混合物三硝基甲苯与三硝基苯和六硝基芪混合物038911039 三硝基甲苯与硝基萘混合物梯萘炸药11040 2,4,6-三硝基苯甲硝胺特屈儿0208 11041 环三次甲基三硝胺[含水≥15%]黑索金;旋风炸药007211041 环三次甲基三硝胺[钝感的]048311042 环三次甲基三硝胺与三硝基甲苯混合物[干的或含水＜15%]黑索雷特011811043 环三次甲基三硝胺与三硝基甲苯和铝粉混合物黑索金与梯恩梯和铝粉混合炸药;黑索托纳尔039311044 环三次甲基三硝胺与环四次甲基四硝胺混合物[含水≥15%或含钝感剂≥10%]黑索金与奥克托金混合物039111046 环四次甲基四硝胺[含水≥15%]奥克托金(HMX) 022611046 环四次甲基四硝胺[钝感的]048411047 环四次甲基四硝胺与三硝基甲苯混合物[干的或含水＜15%]奥克托金与梯恩梯混合炸药;奥克雷特026611049 季戊四醇四硝酸酯[含水≥25%或含钝感剂≥15%]泰安;喷梯尔015011049 季戊四醇四硝酸酯[含蜡≥7%]041111050 季戊四醇四硝酸酯与三硝基甲苯混合物[干的或含＜15%]泰安与梯恩梯混合炸药;彭托雷特015111052 二硝基(苯)酚[干的或含水＜15%]007611053 二硝基间苯二酚[干的或含水＜15%]007811054 1,3,5-三硝基苯[干的或含水＜30%]均三硝基苯021411055 2,4,6-三硝基二甲苯11056 2,4,6-三硝基氯(化)苯苦基氯015511057 2,4,6-三硝基苯酚[干的或含水＜30%]苦味酸015411058 2,4,6-三硝基苯酚纳苦味酸钠11059 2,4,6-三硝基苯酚铵[干的或含水＜10%]苦味酸铵000411060 三硝基间甲酚 0216 11061 2,4,6-三硝基间苯二酚收敛酸0219,039411062 三硝基苯甲醚三硝基茴香醚021311063 三硝基苯乙醚 021811064 2,4,6-三硝基苯甲酸[干的或含水＜30%]三硝基安息香酸021511065 三硝基苯磺酸 0386 11066 2,4,6-三硝基苯磺酸钠11067 2,4,6-三硝基苯胺苦基胺015311068 2,3,4,6-四硝基苯胺 0207 11069 三硝基芴酮 0387 11070 三硝基萘 0217 11071 四硝基萘11072 四硝基萘胺11073 六硝基二苯胺六硝炸药;二苦基胺007911074 六硝基二苯胺铵盐曙黄11075 六硝基二苯硫[干的或含水＜10%]二苦基硫040111076 六硝基-1,2-二苯乙烯六硝基芪039211077 甘露糖醇六硝酸酯[含水或水加乙醇≥40%]六硝基甘露醇013311078 二乙二醇二硝酸酯[含不挥发、不溶于水的钝感剂≥25%]二甘醇二硝酸酯007511079 甲基丙烯酸三硝基乙酯11080 5-硝基苯并三唑硝基连三氮杂茚038511081 高氯酸铵 040211082 硝酸铵[含可燃物＞0.2%,包括以碳计算的任何有机物,但不包括任何其他添加剂]022211083 硝酸铵肥料[比硝酸铵(含可燃物＞0.2%,包括以碳计算的任何有机物,但不包括任何其他添加剂)更易爆炸]022311084 硝铵炸药铵梯炸药第3项 具有燃烧危险和较小爆炸或较小抛射危险，或两者肩有、但无整体爆炸危险的物质和物品13005 二亚硝基苯 040613006 二硝基邻甲(苯)酚钠[干的或含水＜15%]023413007 硝基芳香族衍生物钾盐[爆炸性的]015813010 二硝基(苯)酚碱金属盐[干的或含水＜15%]007713011 4,6-二硝基-2-氨基苯酚钠[干的或含水＜20%]苦氨酸钠023513012 4,6-二硝基-2-氨基苯酚锆[干的或含水＜20%]苦氨酸锆023613013 硝化二乙醇胺火药13014 硝化纤维素[含乙醇≥25%] 0342 13015 硝化纤维素[含增塑剂≥18%]0343 第4项 无重大危险的爆炸物质和物品14017 四唑并-1-乙酸四氮杂茂-1-乙酸040714018 5-巯基四唑并-1-乙酸 0448 第2类 压缩气体和液化气体第1项 易燃气体21001 氢[压缩的] 氢气104921002 氢[液化的] 液氢196621003 氢气和甲烷混合物[压缩的]203421004 氘重氢195721005 一氧化碳 1016 21006 硫化氢[液化的] 1053 21007 甲烷[压缩的] 1971 21007 天然气[含甲烷的;压缩的]沼气197121008 甲烷[液化的] 液化甲烷197221008 天然气[含甲烷的;液化的]液化天然气197221009 乙烷[压缩的] 1035 21010 乙烷[液化的] 液化乙烷196121011 丙烷 1978 21012 正丁烷 1011 21012 异丁烷 196921013 2,2-二甲基丙烷 2044 21014 环丙烷[液化的] 1027 21015 环丁烷 2601 21016 乙烯[压缩的] 1962 21017 乙烯[液化的] 液化乙烯103821018 丙烯 1077 21019 1-丁烯 1012 21019 2-丁烯 1012 21020 异丁烯 1055 21021 丙二烯[抑制了的] 2200 21022 1,3-丁二烯[抑制了的] 联乙烯101021023 1,3-戊二烯[抑制了的]21023 1,4-戊二烯[抑制了的]21024 乙炔[溶于介质的] 电石气100121025 1-丁炔[抑制了的] 乙基乙炔245221026 氟甲烷甲基氟; 245421027 氟乙烷乙基氟;R161 245321028 1,1-二氟乙烷R152a 1030 21029 1,1,1-三氟乙烷R143 2035 21030 氟乙烯[抑制了的] 乙烯基氟186021031 1,1-二氟乙烯偏二氟乙烯;R1132a195921032 四氟乙烯[抑制了的] 1081 21033 二氟氯乙烷R142 2517 21034 三氟氯乙烯[抑制了的] 氯三氟乙烯;R1113 108221035 三氟溴乙烯溴三氟乙烯241921036 氯乙烷乙基氯103721037 氯乙烯[抑制了的] 乙烯基氯108621038 溴乙烯[抑制了的] 乙烯基溴108521039 环氧乙烷氧化乙烯104021040 (二)甲醚 1033 21041 甲乙醚乙甲醚;甲氧基乙烷103921042 乙烯基甲醚[抑制了的] 甲基乙烯醚108721043 一甲胺[无水] 氨基甲烷;甲胺106121044 二甲胺[无水] 1032 21045 三甲胺[无水] 1083 21046 乙胺氨基乙烷103621047 甲硫醇疏基甲烷106421048 亚硝酸甲酯[特许的] 2455 21049 乙硼烷二硼烷191121050 四氢化硅硅烷;甲硅烷220321051 甲基氯硅烷氯甲基硅烷253421052 石油气原油气107121053 石油气[液化的] 液化石油气107521054 氯甲烷和二氯甲烷混合物 191221055 丙炔和丙二烯混合物[稳定的]甲基乙炔和丙二烯混合物1060第2项 不燃气体22001 氧[压缩的] 1072 22002 氧[液化的] 液氧107322003 空气[压缩的] 1002 22004 空气[液化的] 1003 22005 氮[压缩的] 1066 22006 氮[液化的] 液氮197722007 氦[压缩的] 1046 22008 氦[液化的] 液氦196322009 氖[压缩的] 1065 22010 氖[液化的] 液氖191322011 氩[压缩的] 1006 22012 氩[液化的] 液氩195122013 氪[压缩的] 1056 22014 氪[液化的] 液氪197022015 氙[压缩的] 2036 22016 氙[液化的] 液氙259122017 一氧化二氮[压缩的] 氧化亚氮;笑气107022018 一氧化二氮[液化的] 氧化亚氮;笑气220122019 二氧化碳[压缩的] 碳(酸)酐101322020 二氧化碳[液化的] 2187 22021 六氟化硫 1080 22022 氯化氢[无水] 1050,2186 22023 三氯化硼 1741 22024 碘化氢[无水] 2197 22025 氨溶液[35%<含氨≤50%] 2073 22025 含氨肥料[含游离氨＞35%] 104322026 稀有气体混合物，如：氦氖混合气197922027 稀有气体和氧气混合物 1980 22028 稀有气体和氮气混合物 1981 22029 二氧化碳和氧气混合物 1014 22030 二氧化碳和一氧化二氮混 1015合物22031 二氧化碳和环氧乙烷混合物[含环氧乙烷≤6%]二氧化碳和氧化乙烯混合物195222032 三氟甲烷 R23;氟仿198422033 四氟甲烷R14 1982 22034 六氟乙烷 R116;全氟乙烷219322035 八氟丙烷全氟丙烷242322036 八氟环丁烷RC318 1976 22037 六氟丙烯全氟丙烯185822038 八氟-2-丁烯全氟-2-丁烯242222039 氯二氟甲烷R22 1018 22040 氯三氟甲烷R13 1022 22041 氯三氟乙烷R133a 1983 22042 氯四氟乙烷R124 1021 22043 氯五氟乙烷R115 1020 22044 二氯一氟甲烷R21 1029 22045 二氯二氟甲烷R12 1028 22046 二氯四氟乙烷R114 1958 22047 三氯一氟甲烷R1122048 氯二氟溴甲烷R12B1 1974 22049 溴三氟甲烷R13B1 100922050 氯二氟甲烷和氯五氟乙烷共沸物R502 197322051 氯三氟甲烷和三氟甲烷共沸物R503 259922052 二氯二氟甲烷和二氟乙烷共沸物R500 2602第3项 有毒气体23001 氟[压缩的] 1045 23002 氯[液化的] 液氯101723003 氨[液化的,含氨＞50%] 液氨100523004 溴化氢[无水] 1048 23005 磷化氢磷化三氢;膦219923006 砷化氢砷化三氢;胂218823007 硒化氢[无水] 2202 23008 锑化氢锑化三氢;锑267623009 一氧化氮 166023010 一氧化氮和四氧化二氮混合物197523011 三氧化二氮[特许的] 亚硝酐2421 23012 四氧化二氮[液化的] 二氧化氮106723013 二氧化硫[液化的] 亚硫酸酐107923014 二氟化氧 2190 23015 三氟化氯 1749 23016 三氟化氮 2451 23017 三氟化磷23018 三氟化硼氟化硼100823019 四氟化硫 2418 23020 四氟化硅氟化硅185923021 五氟化氯 2548 23022 五氟化磷 2198 23023 六氟化硒 2194 23024 六氟化碲 2195 23025 六氟化钨 2196 23026 氯化溴溴化氯290123027 氯化氰氰化氯;氯甲腈158923028 氰[液化的] 1026 23029 一氧化碳和氢气混合物水煤气260023030 煤气 1023 23031 四氟(代)肼23032 六氟丙酮 2420 23033 羰基硫硫化碳酰220423034 硫酰氟氟化磺酰219123035 羰基氟氟化碳酰241723036 过氯酰氟氟化过氯氧;氟化过氯酰308323037 三氟乙酰氯氯化三氟乙酰305723038 碳酰氯光气107623039 亚硝酰氯氯化亚硝酰106923040 氯甲烷甲基氯;R40 106323041 溴甲烷甲基溴106223042 二氯硅烷 2189 23043 锗烷 219223044 三氯硝基甲烷和氯甲烷混合物氯化苦和氯甲烷混合物158223045 三氯硝基甲烷和溴甲烷混合物氯化苦和溴甲烷混合物158123046 四磷酸六乙酯和压缩气体混合物161223047 焦磷酸四乙酯和压缩气体混合物170523048 二硫代焦磷酸四乙酯和压 1703缩气体混合物23049 二氧化碳和环氧乙烷混合物[含环氧乙烷＞6%]二氧化碳和氧化乙烯混合物104123050 二氯二氟甲烷和环氧乙烷混合物[含环氧乙烷≤12%]二氯二氟甲烷和氧化乙烯混合物307023052 八氟异丁烯全氟异丁烯第3类 易燃液体第1项 低闪点液体31001 汽油[闪点＜-18]℃ 1203,1257 31002 正戊烷戊烷126531002 2-甲基丁烷异戊烷126531003 环戊烷 1146 31004 环己烷六氢化苯114531005 己烷及其异构体，如： 1208 31005 正己烷己烷120831005 2-甲基戊烷异己烷120831005 2,2-二甲基丁烷新己烷31005 2,3-二甲基丁烷二异丙基245731005 己烷异构体混合物31006 1-戊烯 1108 31006 2-戊烯31007 异戊烯，如： 2371 31007 2-甲基-1-丁烯 2459 31007 3-甲基-1-丁烯α-异戊烯256131007 2-甲基-2-丁烯β-异戊烯246031008 环戊烯 2246 31009 1-己烯丁基乙烯237031009 2-己烯31010 己烯异构体，如：31010 异己烯 2288 31010 2,3-二甲基-1-丁烯31010 2,3-二甲基-2-丁烯四甲基乙烯31010 2-甲基-1-戊烯31010 2-甲基-2-戊烯31010 3-甲基-1-戊烯31010 3-甲基-2-戊烯31010 4-甲基-1-戊烯31010 4-甲基-2-戊烯31010 2-乙基-1-丁烯31011 异庚烯 228731012 2-甲基-1,3-丁二烯[抑制了的]异戊间二烯121831013 2-氯-1,3-丁二烯[抑制了的] 1991 31014 己二烯，如： 2458 31014 1,3-己二烯 2458 31014 1,4-己二烯 2458 31014 1,5-己二烯 2458 31014 2,4-己二烯 2458 31015 甲基戊二烯 2461 31016 二环庚二烯 2,5-降冰片二烯225131017 2-丁炔巴豆炔;二甲基乙炔114431018 1-戊炔丙基乙炔31019 1-氯丙烷氯(正)丙烷;丙基氯127831020 2-氯丙烷氯异丙烷;异丙基氯235631021 2-氯丙烯异丙烯基氯245631021 3-氯丙烯烯丙基氯;α-氯丙烯110031022 乙醛 1089 31023 异丁醛 2045 31024 丙烯醛[抑制了的] 烯丙醛109231025 丙酮二甲(基)酮109031026 乙醚二乙(基)醚115531027 正丙醚二(正)丙醚238431027 异丙醚二异丙(基)醚115931028 甲基丙基醚甲丙醚261231028 乙基丙基醚乙丙醚261531029 乙烯基乙醚[抑制了的] 乙基乙烯醚130231029 乙氧基乙烯31030 二乙烯基醚[抑制了的] 乙烯基醚116731031 二甲氧基甲烷甲撑二甲醚;二甲醇缩甲醛;甲缩醛123431031 1,1-二甲氧基乙烷二甲醇缩乙醛;乙醛缩二甲醇237731031 二乙氧基甲烷甲醛缩二乙醇;二乙醇缩甲醛237331031 1,1-二乙氧基乙烷乙叉二乙基醚;二乙醇缩乙醛;乙缩醛108831032 1,2-环氧丙烷[抑制了的] 氧化丙烯;甲基环氧乙烷128031033 甲硫醚二甲硫1164 31034 乙硫醇硫氢乙烷;巯基乙烷236331035 正丙硫醇硫代正丙醇;1-巯基丙烷240231036 2-丁基硫醇仲丁硫醇122831036 叔丁基硫醇叔丁硫醇122831037 甲酸甲酯 1243 31038 甲酸乙酯 1190 31039 亚硝酸乙酯醇溶液 1194 31040 呋喃氧杂茂238931041 2-甲基呋喃 2301 31042 四氢呋喃氧杂环戊烷205631043 四氢吡喃氧己环31044 甲胺水溶液氨基甲烷水溶液123531045 乙胺水溶液[浓度50%～70%]氨基乙烷水溶液227031046 二乙胺 1154 31047 1-氨基丙烷正丙胺127731047 2-氨基丙烷异丙胺122131048 3-氨基丙烯烯丙胺233431049 四甲基硅烷四甲基硅274931050 二硫化碳 1131 31051 锆[悬浮于易燃液体中的] 130831052 环氧乙烷和氧化丙烯混合物[含环氧乙烷≤30%]氧化乙烯和氧化丙烯混合物2983第2项 中闪点液体32001 汽油[-18≤℃闪点＜23]℃ 1203,1257 32002 石油醚石油精127132003 石油原油原油1267,125532004 石脑油溶剂油1256,255332005 3-甲基戊烷 1208 32006 正庚烷 1206 32007 庚烷异构体，如： 1206 32007 2-甲基己烷 1206 32007 3-甲基己烷 1206 32007 2,2-二甲基戊烷 1206 32007 2,3-二甲基戊烷 1206 32007 2,4-二甲基戊烷二异丙基甲烷120632007 3,3-二甲基戊烷 2,2-二乙基丙烷120632007 3-乙基戊烷 1206 32007 2,2,3-三甲基丁烷 1206 32008 正辛烷 1262 32009 辛烷异构体，如： 1262 32009 异辛烷 126232009 2,2,3-三甲基戊烷 1262 32009 2,2,4-三甲基戊烷 1262 32009 2,3,4-三甲基戊烷 1262 32009 2,2-二甲基己烷 1262 32009 2,3-二甲基己烷 1262 32009 2,4-二甲基己烷 1262 32009 3,3-二甲基己烷 1262 32009 3,4-二甲基己烷 1262 32009 2-甲基庚烷 1262 32009 3-甲基庚烷 1262 32009 4-甲基庚烷 1262 32009 3-乙基己烷 1262 32009 2-甲基-3-乙基戊烷 1262 32010 2,2,4-三甲基己烷32010 2,2,5-三甲基己烷32011 环戊烷衍生物，如：32011 甲基环戊烷 2298 32011 乙基环戊烷32011 1,1-二甲基环戊烷32011 1,2-二甲基环戊烷32011 1,3-二甲基环戊烷32011 正丙基环戊烷32012 环己烷衍生物，如：32012 甲基环己烷六氢(化)甲苯;环己基甲烷2296,226332012 1,1-二甲基环己烷32012 1,2-二甲基环己烷 2263 32012 1,3-二甲基环己烷 2263 32012 1,4-二甲基环己烷 226332012 叔丁基环己烷特丁基环己烷;环己基叔丁烷226332013 环庚烷 2241 32014 3-甲基-1-丁烯异丙基乙烯256132015 1-庚烯正庚烯;正戊基乙烯227832015 2-庚烯32015 3-庚烯32016 1-辛烯32016 2-辛烯32017 辛烯异构体，如：32017 异辛烯 121632017 2,4,4-三甲基-1-戊烯 2050 32017 2,4,4-三甲基-2-戊烯 2050 32018 辛二烯 2309 32019 2,6-二甲基-3-庚烯32020 1-甲基-1-环戊烯32021 1,3-环戊二烯32022 环己烯 1,2,3,4-四氢化苯225632023 环己烯衍生物，如：32023 4-甲基-1-环己烯32023 4-乙烯-1-环己烯32024 1,3-环己二烯 1,2-二氢苯32024 1,4-环己二烯 1,4-二氢苯32025 环庚烯 2242 32026 1,3,5-环庚三烯环庚三烯260332027 环辛烯32028 1,3,5,7-环辛四烯环辛四烯235832029 1-己炔32029 2-己炔32029 3-己炔32030 1-庚炔正庚炔32031 1-辛炔32031 2-辛炔32031 3-辛炔32031 4-辛炔32032 异丙烯基乙炔32033 1-氯丁烷正丁基氯;氯代正丁烷112732033 氯代异丁烷异丁基氯32033 2-氯丁烷仲丁基氯;氯代仲丁烷32033 氯代叔丁烷叔丁基氯;特丁基氯32034 氯代正戊烷正戊基氯110732034 1-氯-3-甲基丁烷异戊基氯;氯代异戊烷32035 1,1-二氯乙烷乙叉二氯236232035 1,2-二氯乙烷乙撑二氯;亚乙基二氯;1,2-二氯化乙烯118432036 1,2-二氯丙烷二氯化丙烯1279 32037 氯化环戊烷32038 1-氯-2-丁烯32038 3-氯-1-丁烯32039 1-氯-2-甲基-2-丙烯2-甲基-3-氯丙烯;甲基烯丙基氯;氯化异丁烯255432040 1,1-二氯乙烯[抑制了的] 偏二氯乙烯130332040 1,2-二氯乙烯二氯化乙炔115032041 2,3-二氯丙烯 204732042 2-溴丙烷异丙基溴;溴代异丙烷234432043 1-溴丁烷正丁基溴;溴代正丁烷112632043 1-溴-2-甲基丙烷异丁基溴;溴代异丁烷234232043 2-溴丁烷仲丁基溴;溴代仲丁烷233932043 2-溴-2-甲基丙烷叔丁基溴;特丁基溴;溴代叔丁烷32044 1-溴-3-甲基丁烷异戊基溴;溴代异戊烷234132044 2-溴戊烷仲戊基溴;溴代仲戊烷234332045 3-溴-1-丙烯烯丙其溴109932046 3-溴丙炔 234532047 1-碘丙烷正丙基碘;碘代正丙烷239232047 2-碘丙烷异丙基碘;碘代异丙烷32048 1-碘-2-甲基丙烷异丁基碘;碘代异丁烷239132048 2-碘丁烷仲丁基碘;碘代仲丁烷239032048 2-碘-2-甲基丙烷叔丁基碘;碘代叔丁烷32049 3-碘-1-丙烯烯丙基碘;碘化烯丙基172332049 3-碘-2-丙烯丙烯基碘;碘代丙烯32050 苯纯苯1114 32050 溶剂苯32051 粗苯动力苯;混合苯32051 重质苯32052 甲基苯甲苯1294 32053 乙基苯乙苯1175 32054 氟代苯氟苯2387 32055 1,2-二氟苯邻二氟苯32055 1,3-二氟苯间二氟苯320551,4-二氟苯 对二氟苯320562-氟甲苯 邻氟甲苯;邻甲(基)氟苯;2-甲(基)氟苯2388320563-氟甲苯 间氟甲苯;间甲(基)氟苯;3-甲(基)氟苯2388320564-氟甲苯 对氟甲苯;对甲(基)氟苯;4-甲(基)氟苯238832057三氟甲苯 233832058甲醇 123032059黄染料母醇10%甲醇溶液砧吨氢醇10%甲醇溶液32060甲醇钠甲醇溶液 甲醇钠合甲醇128932061乙醇[无水] 无水酒精117032061乙醇溶液[-18≤℃闪点＜23]℃酒精溶液32061变性乙醇 变性酒精32062硝化甘油乙醇溶液[含硝化甘油≤5%]1204,306432063乙醇钠乙醇溶液 乙醇钠合乙醇320641-丙醇 正丙醇1274320642-丙醇 异丙醇 1219 320652-丙烯-1-醇 烯丙醇;蒜醇1098 320662-甲基-2-丙醇三甲基甲醇;特丁醇;叔丁醇112032067丙醛 127532068正丁醛 112932069正戊醛 2058320693-甲基丁醛 异戊醛 320702-乙基丁醛 二乙基乙醛1178 320712-丁烯醛[抑制了的] 巴豆醛;β-甲基丙烯醛114332072α-甲基丙烯醛 异丁烯醛 2396 320732-丁酮乙基甲基酮;甲乙酮1193320743-甲基-2-丁酮甲基异丙基(甲)酮2397320742-戊酮甲(基)丙(基)酮1249320743-戊酮二乙(基)酮1156320753-甲基-2-戊酮甲基仲丁基(甲)酮320754-甲基-2-戊酮甲基异丁基(甲)酮;异己酮1245320752-甲基-3-戊酮乙基异丙基(甲)酮320762,4-二甲基-3-戊酮二异丙基甲酮320774-羟基-4-甲基-2-戊酮 双丙酮醇1148 320783-丁烯-2-酮甲基乙烯基(甲)酮;1251丁烯酮32079 1-戊烯-3-酮乙烯乙基甲酮32080 甲基异丙烯(甲)酮[抑制了的]124632081 二甲基(乙)二酮双乙酰;丁二酮2346 32082 三氟丙酮32083 甲基正丁基醚1-甲氧基丁烷;甲丁醚235032084 甲基叔丁基醚 2398 32085 乙基正丁基醚乙氧基丁烷;乙丁醚117932086 乙基烯丙基醚烯丙基乙基醚233532087 正丁基乙烯(基)醚[抑制了的]正丁氧基乙烯;乙烯(基)正丁醚235232087 异丁基乙烯(基)醚[抑制了的]乙烯(基)异丁醚;异丁氧基乙烯130432088 二烯丙基醚烯丙基醚236032089 氯甲基甲醚甲基氯甲醚123932090 氯甲基乙醚 2354 32091 乙烯(2-氯乙基)醚 (2-氯乙基)乙烯醚32092 2-溴乙基乙醚 234032093 1,2-二甲氧基乙烷乙二醇二甲醚;二甲基溶纤剂225232094 2,2-二甲氧基丙烷32095 3,3-二乙氧基丙烯丙烯醛二乙缩醛;二乙基缩醛丙烯醛237432096 二氧戊环乙二醇缩甲醛1166 32097 1,2-环氧丁烷[抑制了的] 氧化丁烯3022 32098 1,4-二氧杂环己烷二恶烷;1,4-二氧己环1165 32099 2,5-二甲基呋喃 2,5-二甲基氧(杂)茂32100 2-甲基四氢呋喃四氢-2-甲基呋喃253632101 氧茚苯并呋喃;香豆酮;古马隆32102 2,3-二氢吡喃 2376 32103 四氢化吡咯吡咯烷;四氢氮杂茂192232104 吡啶氮杂苯128232105 1,2,5,6-四氢吡啶 2410 32106 哌啶六氢吡啶;氮己环240132107 N-甲基哌啶 N-甲基六氢吡啶239932107 2-甲基哌啶 2-甲基六氢吡啶32107 3-甲基哌啶 3-甲基六氢吡啶32107 4-甲基哌啶 4-甲基六氢吡啶32108 N-乙基哌啶 N-乙基六氢吡啶238632109 N-甲基吗啉 2535 32110 噻吩硫杂茂;硫代呋喃241432111 四氢噻吩四甲撑硫;四氢硫杂茂241232112 3-甲基噻吩甲基硫茂32113 硫代乙酸硫代醋酸243632114 二硫化二甲基二甲二硫;甲基化二硫238132115 (二)乙硫醚硫代乙醚;二乙硫237532116 正丁硫醇 1-硫代丁醇234732116 2-甲基-1-丙硫醇异丁硫醇32117 1-戊硫醇正戊硫醇111132117 3-甲基-1-丁硫醇异戊硫醇32117 2-甲基-2-丁硫醇叔戊硫醇;特戊硫醇32117 2-甲基-1-丁硫醇32117 戊硫醇异构体混合物32118 2-丙烯-1-硫醇烯丙基硫醇32119 乙酰氯氯(化)乙酰171732120 丙酰氯氯(化)丙酰181532121 正丁酰氯氯(化)丁酰235332121 异丁酰氯氯(化)异丁酰239532122 甲酸正丙酯32122 甲酸异丙酯 1281 32123 甲酸正丁酯 1128 32123 甲酸异丁酯 2393 32124 原甲酸(三)甲酯三甲氧基甲烷32125 甲酸烯丙酯 2336 32126 乙酸甲酯醋酸甲酯123132127 乙酸乙酯醋酸乙酯117332128 乙酸正丙酯醋酸正丙酯127632128 乙酸异丙酯醋酸异丙酯122032129 乙酸三甲酯 1,1,1-三甲氧基乙烷32130 乙酸正丁酯醋酸正丁酯112332130 乙酸异丁酯醋酸异丁酯32130 乙酸仲丁酯醋酸仲丁酯32130 乙酸叔丁酯醋酸叔丁酯32131 乙酸乙烯酯[抑制了的] 乙烯基乙酸酯;醋酸乙烯酯130132132 乙酸异丙烯酯醋酸异丙烯酯2403 32133 乙酸烯丙酯醋酸烯丙酯233332134 三氟乙酸乙酯三氟醋酸乙酯32135 丙酸甲酯 1248 32136 丙酸乙酯 1195 32137 丙酸异丙酯 2409 32138 丙酸异丁酯 2394 32138 丙酸仲丁酯32139 丙酸烯丙酯32140 正丁酸甲酯 1237 32140 异丁酸甲酯32141 异丁酸乙酯 2385 32142 异丁酸异丙酯 2406 32143 正丁酸乙烯酯[抑制了的] 乙烯基丁酸酯283832144 正戊酸甲酯32144 异戊酸甲酯 2400 32145 2,2-二甲基丙酸甲酯三甲基乙酸甲酯32146 丙烯酸甲酯[抑制了的] 1919 32147 丙烯酸乙酯[抑制了的] 1917 32148 丁烯酸甲酯巴豆酸甲酯32148 丁烯酸乙酯巴豆酸乙酯186232149 异丁烯酸甲酯[抑制了的] 甲基丙烯酸甲酯;牙托水;有机玻璃单体124732149 异丁烯酸乙酯[抑制了的] 甲基丙烯酸乙酯227732150 氯甲酸甲酯 1238 32151 氯甲酸乙酯 1182 32152 氯甲酸异丙酯 2407 32153 亚硝酸酯类化合物，如：32153 亚硝酸正丙酯32153 亚硝酸异丙酯32153 亚硝酸正丁酯 2351 32153 亚硝酸异丁酯 2351 32153 亚硝酸正戊酯 1113 32153 亚硝酸异戊酯 1113 32154 硝酸乙酯醇溶液32155 硝酸正丙酯 1865 32155 硝酸异丙酯 1222 32156 硼酸(三)甲酯三甲氧基硼烷241632156 硼酸(三)乙酯三乙氧基硼烷117631257 碳酸(二)甲酯 1161 32158 钛酸(四)乙酯四乙氧基钛32158 钛酸(四)正丙酯 2413 32158 钛酸(四)异丙酯32159 乙腈甲基氰164832160 丙腈乙基氰240432161 正丁腈丙基氰241132161 异丁腈异丙基氰228432162 丙烯腈[抑制了的] 氰(基)乙烯109332163 甲基丙烯腈[抑制了的] 3079 32164 异氰酸酯类[易燃的]，如：32164 异氰酸甲酯 2480 32164 异氰酸乙酯 2481 32164 异氰酸正丙酯 2482 32164 异氰酸异丙酯 2483 32164 异氰酸正丁酯 2485 32164 异氰酸异丁酯 2486 32164 异氰酸叔丁酯 248432164 甲氧基异氰酸甲酯甲氧基甲基异氰酸酯260532165 硫代异氰酸甲酯异硫氰酸甲酯;甲基芥子油247732166 二甲胺溶液 1160 32167 三甲胺溶液 1297 32168 三乙胺 1296 32169 混胺-0232170 二(正)丙胺 2383 32170 二异丙胺 1158 32171 N,N-二甲基丙胺 2266 32172 正丁胺 1-氨基丁烷112532172 异丁胺 1-氨基-2-甲基丙烷121432172 仲丁胺 2-氨基丁烷32172 叔丁胺2-氨基-2-甲基丙烷;特丁胺32173 N-甲基(正)丁胺 2945 32174 二仲丁胺32175 正戊胺 1-氨基戊烷110632175 异戊胺 1-氨基-3-甲基丁烷32175 仲戊胺 1-甲基丁胺32176 1,3-二甲基丁胺 2-氨基-4-甲基戊烷237932177 N,N-二异丙基乙胺 N-乙基二异丙胺32178 N,N,N′,N′-四甲基乙二胺 1,2-双(二甲基氨基)2372乙烷32179 二烯丙(基)胺 2359 32180 丙烯亚胺[抑制了的] 甲基氮丙环192132181 环戊胺氨基环戊烷32182 六亚甲基亚胺 2493 32183 甲基肼甲基联胺124432184 1,1-二甲基肼二甲基肼[不对称] 116332184 1,2-二甲基肼二甲基肼[对称] 238232185 六甲基二硅烷胺六甲基二硅亚胺32186 有机硅烷化合物，如：32186 甲基三氯硅烷三氯甲基硅烷125032186 二甲基二氯硅烷二氯二甲基硅烷116232186 三甲基氯硅烷氯化三甲基硅烷129832186 乙基三氯硅烷三氯乙基硅烷119632186乙烯(基)三氯硅烷[抑制了的]三氯乙烯硅烷130532186 二甲基二乙氧基硅烷二乙氧基二甲基硅烷238032186 三甲基乙氧基硅烷乙氧基三甲基硅烷32186 六甲基二硅烷32187 六甲基二硅醚六甲基氧二硅烷32188 正硅酸甲酯四甲氧基硅烷;硅酸四甲酯;原硅酸甲酯260632189 二乙基硒32190 硝化纤维素溶液[含氮量≤12.6%,含硝化纤维素≤55%]硝化棉溶液205932191 杜仲胶溶液古塔波胶溶液120532192 焦油，如：32192 煤焦油 1136 32192 松焦油32193 含丙酮的制品，如：32193 去光水32193 二硫化钼润滑膜32193 电子束管石墨乳32193 电子数码管石墨乳32194 含苯或甲苯的制品，如：32194 分离焦油32194 塑料印油32194 偶氨紫苯溶液32194 塑料薄膜油墨32194 闪烁液32195 含乙醇或乙醚的制品，如： 32195 天青醇溶液32195 引擎开导剂发动机冷起动装置起动液32195 水准器泡水平泡32195 正硅酸乙酯包埋液32195 记号笔墨水32195 尼古劳定溶液32195 尼龙丝网感光浆32195 阳离子表面活性洗涤剂32195 防灰剂32195 红磷溶液32195 苄氯菊酯乙醇溶液灭害灵浓液32195 鸡眼水32195 苯乙酸乙醇溶液32195 金属络合染料[皮革用]32195 贴胡胶32195 染皮鞋水32195 胶体石墨乙醇制剂32195 烟用香精32195着色渗透剂[金属探伤用]32195 硫汞白癫疯擦药32195 照相红碘水32195 打字蜡纸改正液32195 打字机洗字水32195 醇溶凹印油墨32196 含一级易燃溶剂的胶粘剂[-18≤℃闪点＜23]℃，如：113332196 丙烯酸酯胶粘剂 1133 32196 氯丁酚醛胶粘剂强力胶113332196 聚氨基甲酸酯胶粘剂地面敷料113332196 202胶粘剂列克那胶;气缸床垫胶;列克纳113332196 301胶粘剂 BS-3胶113332196 303胶粘剂 1133 32196 730胶粘剂 1133 32196 1452#胶粘剂有机硅云母胶113332196 JX-15胶粘剂 113332196 JY-7胶粘剂 1133 32196 SF-5胶粘剂 1133 32196 传真纸粘合剂 1133 32196 聚氨酯粘合剂 1133 32196 嫌气性密封粘合剂 1133 32196 聚氨酯导电粘合剂 DAD-2胶113332196 酚醛·丁腈粘合剂 JX-5胶113332196 酚醛·缩醛有机硅粘合剂JE-1胶113332196 酚醛·缩醛粘合剂201#、204#、205#粘合剂113332196 聚乙烯醇缩醛胶6胶113332196 聚硅氧橡皮基印模膏 1133 32196 多用粘结胶 1133 32196 FS203C胶 1133 32196 压敏胶 1133 32196 过氯乙烯胶 1133 32196 体患除凝胶 1133 32196 汽车门窗胶 1133 32196 橡胶金属胶金属密着胶113332196 液体密封胶 1133 32196 聚氨酯涂层胶 1133 32196 黑醇酸隔热胶黑色防声隔热涂料113332196 橡胶水 1133 32196 蜡纸胶水 1133 32196 氟橡胶胶浆 1133 32196 硝基胶液 1133 32196 缩醛胶液 1133 32196 缩醛烘干胶液 1133 32196 硅酸苯悬浮液 1133 32196 聚氨酯化学灌浆材料 FT-901堵固剂;氰凝113332196 伏栏甲基丙烯酸氯化铬[浸在异丙醇溶液中的]113332197 含一级易燃溶剂的合成树脂[-18≤℃闪点＜23]℃，如：186632197 醇酸树脂32197 酚醛树脂32197 有机硅树脂32197 环氧树脂32198 含一级易燃溶剂的油漆、辅助材料及涂料[-18≤℃闪点1139,1263,1293＜23]℃，如：32198 乙烯防腐漆 1139,1263,1293 32198 丙烯酸清烘漆 1139,1263,1293 32198 丙烯酸清漆 1139,1263,1293 32198 丙烯酸漆稀释剂 1139,1263,1293 32198 脱漆剂 1139,1263,1293 32198 甲级清喷漆[静电用] 1139,1263,1293 32198 7110甲聚氨酯固化剂 1139,1263,1293 32198 再生胶沥青涂料 1139,1263,1293 32198 有机硅建筑防水剂 1139,1263,1293 32198 有机硅漆稀释剂 1139,1263,1293 32198 过氯乙烯木器漆 1139,1263,1293 32198 过氯乙烯可剥漆 1139,1263,1293 32198 过氯乙烯底漆 1139,1263,1293 32198 过氯乙烯清漆 1139,1263,1293 32198 过氯乙烯磁漆 1139,1263,1293 32198 过氯乙烯防腐清漆 1139,1263,1293 32198 过氯乙烯防腐磁漆 1139,1263,1293 32198 过氯乙烯防腐漆 1139,1263,1293 32198 过氯乙烯防潮清漆 1139,1263,1293 32198 过氯乙烯锤纹漆 1139,1263,1293 32198 过氯乙烯锤纹漆稀释剂 1139,1263,1293 32198 过氯乙烯漆稀释剂 1139,1263,1293 32198 虫胶清漆泡立水;虫胶液1139,1263,129332198 纤维素漆 1139,1263,1293 32198 沥青漆稀释剂 1139,1263,1293 32198 环氧漆固化剂 1139,1263,1293 32198 环氧漆稀释剂 1139,1263,1293 32198 氨基漆稀释剂 1139,1263,1293 32198 氨基静电漆稀释剂 1139,1263,1293 32198 FM涂料蜂蜜桶内壁涂料1139,1263,129332198 酚醛皱纹漆稀释剂 1139,1263,1293 32198 银幕白漆 1139,1263,1293 32198 偏氯乙烯清漆 1139,1263,1293 32198 硝基木器清漆硝基腊克1139,1263,129332198 硝基底漆 1139,1263,1293 32198 硝基透明清漆 1139,1263,1293 32198 硝基清漆 1139,1263,129332198 硝基磁漆 1139,1263,1293 32198 硝基绝缘漆 1139,1263,1293 32198 硝基铅笔漆[包括底漆] 1139,1263,1293 32198 硝基涂布清漆 1139,1263,1293 32198 硝基铝箔清漆 1139,1263,1293 32198 硝基铝箔漆稀释剂 1139,1263,1293 32198 硝基裂纹漆 1139,1263,1293 32198 硝基锤纹漆 1139,1263,1293 32198 硝基静电清烘漆 1139,1263,1293 32198 硝基漆防潮剂 1139,1263,1293 32198 硝基漆稀释剂香蕉水1139,1263,129332198 硝基罐头漆 1139,1263,1293 32198 PM2035溶液 1139,1263,1293 32198 聚苯乙烯塑料地板漆 1139,1263,1293 32198 聚氨酯漆稀释剂聚酯氨基稀释剂1139,1263,129332198 聚酯树脂清漆 1139,1263,1293 32198 聚酯漆包线漆稀释剂 1139,1263,1293 32198 聚酯漆稀释剂 1139,1263,1293 32198 缩醛漆稀释剂 1139,1263,1293 32198 醇酸漆稀释剂 1139,1263,1293 32198 磷化底漆 1139,1263,1293 32198 磷化液 1139,1263,129332199 含一级易燃溶剂的其他制品[-18≤℃闪点＜23]℃，如：32199 显影液32199 分散液32199 汽油氯仿混合液32199 荧光探伤液32199 卡尔费休试剂32199 皮革光滑剂32199 皮革顶层涂饰剂鞋用光亮剂32199 皮革光亮剂32199 印刷油墨 1210 32199 快干助焊剂32199 氢化可的松涂膜剂32199 汽油稀型防锈油32199 半干型防锈油32199 洗油亮光油;亮油;上光油32199 溶剂稀释型防锈油。
KEMET 全系列钽电容规格书[1]
![KEMET 全系列钽电容规格书[1]](https://img.taocdn.com/s3/m/3861ede80975f46527d3e1fc.png)
2.7
#100.0
*U
T491U107(1)004A(2)
4.0
†100.0
*T
T491T107M004A(2)
4.0
150.0
V
T491V157(1)004AS
6.0
#220.0
*V
T491V227(1)004A(2)
8.8
†330.0
*V
T491V337(1)004A(2)
13.2
6.0
15.0
Max
ESR Ω @ +25°C 100 kHz
Max
2.5 Volt Rating at +85ºC (1.7 Volt Rating at +125ºC)Fra bibliotek100.0
T
T491T107(1)2R5A(2)
2.5
24.0
3.9
4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)
Capacitance: 1.0μF to 330μF Tolerance: ±10%, ±20% Voltage: 2.5 - 50 VDC Halogen Free Epoxy 100% Surge Current test on U, V case sizes RoHS Compliant - Lead Free Terminations (See for transition information)
6.0
15.0
8.0
10.0
6.0
5.0
10.0
15.0
6.0
5.0
10.0
10.0
WM14-96PDS 3相功率分析仪说明书
•Class 1 (active energy)•Class 2 (reactive energy)•Accuracy ±0.5 F .S. (current/voltage)•Power analyzer•Display of instantaneous variables: 3x3 digit •Display of energies: 8+1 digit•System variables and phase measurements: W, W dmd ,var, VA, VA dmd ,PF , V , A, An, A dmd ,Hz •A max ,A dmd max ,W dmd max indication•Energy measurements: kWh and kvarh •Hour counter (5+2 DGT)•TRMS meas. of distorted sine waves (voltages/currents)•Galvanically insulated measuring inputs •Profibus DP-V0 serial port •Alarms (visual only) V LN ,An •Power supply: 90 to 260VAC/DCProduct Description3-phase power analyzer with built-in programming key-pad. Particularly recom-mended for displaying the main electrical variables.Housing for panel mounting,(front) protection degree IP65and Profibus DP communica-tion port.Energy Management Power AnalyzerType WM14-96 “Profibus DP”Type SelectionPower supply H:90 to 260VAC/DCRange codes AV5:380/660V L-L /5(6)AAC VL-N: 185 V to 460 V VL-L: 320 V to 800 VAV6:120/208V L-L /5(6)AACVL-N: 45 V to 145 V VL-L: 78 V to 250 VPhase current: 0.03A to 6A Neutral current: 0.09 to 6AOptions DG:Profibus DP + galvanic insu l ated measuring inputsSystem 3:1-2-3-phase,balanced/unbalanced load,with or without neutralInput specifications•Protection degree (front):IP65•Front dimensions: 96x96mmWM14-96Input specifications (cont.)DataDynamic (reading only)System, phase variables and energiesBaud-rateUp to 6Mbit/s (mainlydepending on the length of the wiring and on the number of instruments belonging to the network)Profibus T ype DP-V0enable only for data reading Connectionsmax distance (1200m @ 9.6kbit/s, 100m @ 6Mbit/s) according to IEC61158, 9-pole connector and 10 screw terminals block.Addresses 1 to 125, key-pad selectable ProtocolProfibus DP-V0Profibus DP Serial Port SpecificationsSoftware functionsAuxiliary power supply90 to 260 VAC/DCPower consumptionAC: 4.5 VA DC: 4WPower Supply SpecificationsWM14-96General SpecificationsDisplay variables in 3-phase systems (in a 3-phase system with neutral)MSD: most significant digitLSD: least significant digitWM14-96Display pages (cont.)1) Example of kWh visualization:This example is showing 15 933 453.7 kWh2) Example of kvarh visualization:This example is showing 3 553 944.9 kvarhFigure ASine wave, undistorted Fundamental content 100%Harmonic content 0%A rms =1.1107 | A |Figure BSine wave, indented Fundamental content 10...100%Harmonic content 0...90%Frequency spectrum: 3rd to 16th harmonic Additional error: <1% FS Figure CSine wave, distorted Fundamental content 70...90%Harmonic content 10...30%Frequency spectrum: 3rd to 16th harmonic Additional error: <0.5% FSWaveform of the signals that can be measuredInsulation between inputs and outputsNOTE: In case of fault of first insulation the current from the measuring inputs to the ground is lower than 2 mA.WM14-96Energy metering Where:i = considered phase (L1, L2 or L3)P =active power Q =reactive powert 1,t 2=starting and ending time points of consumption recording n = time unit∆t = time interval between two successive power consumptionsn 1,n 2=starting and ending discrete time points of consumption recordingUsed calculation formulasInstantaneous apparent powerInstantaneous reactive powerSystem variablesEquivalent 3-phase voltage3-phase reactive powerPhase variablesInstantaneous effective voltageInstantaneous active powerInstantaneous power factor3-phase active power3-phase apparent power3-phase power factorNeutral currentAn = A L1 +A L2 +A L3AccuracykWh ,accuracy (RDG) depending on the currentError6A (Imax)6A (Imax)5A (In)5A (In)0.25A (0.05In)0.5A (0.1In)0.10A (0.02In)0.25A (0.05In)0%Class 1 accuracy limits (Active energy)5(6A) Start-up current: 30mA kvarh ,accuracy (RDG) depending on the currentError0%Class 2 accuracy limits (Reactive energy) 5(6A) Start-up current: 30mAPF=1PF=L0.5or C0.86A (Imax)6A (Imax)5A (In)5A (In)0.25A (0.05In)0.5A (0.1In)0.1A (0.02In)0.25A (0.05In)sin ϕ=1sin ϕ=0.5+1.5%+1%PF=1PF=L0.5or C0.8+2.5%+2%+1.5%+1%+1%-1%+2.5%+2%WM14-96Wiring diagramsProfibus port Wiring diagramsTerminate the first WM14 and the l ast WM14 by means of the screw termina l s T1, T2, T3. Use a two po l e shie l ded cab l e,about the connection l ength (from the first to the last instrument)refer to “TAB1”.Terminate the first WM14 positioning the dip-switch in ON on the “Con P” connector and the l ast WM14 by connecting T1, T2, e a two pol e shiel -ded cab l e, about the connection l ength (from the first to the l ast instrument) refer to “TAB1”.NOTE: the direct connection isnot allowed.WM14-961.Key-padT o program the configuration parameters and the display of the variables.Key to enter programming and confirm selections;Keys to:-programme values;-select functions;-display measuring pages.2.DisplayLED-type with alphanumeric indications to:-display configuration parameters;-display all the measured variables.LLSFront Panel DescriptionDimensions and Panel Cut-out96mm91mm61.4mm 15.4mm96m m96mm(*) The mandatory signals have to be made available by the user.64.4mmProfibus port Wiring diagrams (cont.)。
EN1T13中文资料(Vicor)中文数据手册「EasyDatasheet - 矽搜」
ENMODS ™
每个模块：
组件功率前端系统EN合规
C US
特征
• 符合RoHS（使用F或G针款式） • 无源谐波电流衰减
以EN61000-3-2 • 575 W额定输出功率 • 自动调节115/230伏交流输入 • 浪涌电流限制
产品亮点
所述ENMOD系统是一种新型AC前端
00927
10 A Wickman 194 Series or Bussman ABC-10
27 µH 1.3 mH 10Ω 150 kΩ, 0.5 W 2.2 Ω, 2 W MOV
32012 32006
30076
图1b - 输入EMI滤波器EN55022,B级合规
Harmonic Current
图2 - 测量谐波电流在230 VAC,575W¯¯主场迎战EN规格限制
英寸
mm Hours
EN1xxx
Notes 50 - 625瓦,230伏交流输入575 W输出 （参见图2）
中断和限电
2千伏-50微秒线路或中性线接地 1千伏-50微秒线路至中性 带过滤器 （参见图1a和1b）
Notes 由DC-DC变换器提供隔离（多个）
底座接地
264伏
Notes
见许可条件对安全证书 低电压指令 见许可条件对安全证书 低电压指令
输入欠压
AC线路频率
功率因数 浪涌电流
输出规格
参数
90
115
132
Vac
自动量程（倍频器模式下）
180
230
264
Vac
自动量程（桥接模式）
90
Vac
关掉
47
63
标准4153中文翻译
transformation (TTT-diagram)等温转变图（TTT图）..............54
15.Equivalent rectangular and circular
sections for bars棒的等效矩形和圆形截面.............. 59
16.Material indication on drawing材料显示在图纸上..............60
Changes from previous issue
The standard has been revised and adapted to international standard when possible.
Periodical up date.此标准已是修正版，通用于国际化标准，如有可能，也适用于定期更新的版本。
1.1Quenching and tempering steels
1.1.1
缠绕垫标准中数字的含义
内环、外环、金属带材料 名称 代号 1 0Cr13 0Cr18Ni9(304)、 2 SH3407-96 1Cr18Ni9Ti(321) 管法兰用缠绕式垫片 3 0Cr17Ni12Mo2(316) 00Cr19Ni10(304L)、 4 00Cr17Ni14Mo2(316L) 6 Q235A 材质顺序表示：内环/金属带/非金属带/外环 举例: SH3407-96 D1216 表示内外加强缠绕垫:材质为0Cr13/304/石墨/碳钢标准号 SH340来自-96代号 A B C D
代号 1 2 3 4 6 7 8
非金属带材料 名称 代号 石棉(用石墨代) 1 柔性石墨 2 聚四氟乙烯 3
垫片形式 基本型 外加强型 内加强型 内外加强型 内环材料 名称 无内环 碳钢 0Cr18Ni9(304) 0Cr17Ni12Mo2(316) 00Cr17Ni14Mo2(316L) 0Cr18Ni10Ti(321) 0Cr18Ni12Mo2Ti(316Ti) 00Cr19Ni10(304L)
代号 2 3 4
非金属带材料 名称 代号 石棉(用石墨代) 1 柔性石墨 2 聚四氟乙烯 3
内环材料 名称 无内环 碳钢 0Cr18Ni9(304) 0Cr17Ni12Mo2(316) 00Cr17Ni14Mo2(316L)
代号 0 1 2 3 4
举例: HG20631-97 1220 表示外加强缠绕垫:材质为碳钢/304/石墨 垫片材料代号 标准号
代号 0 1 2 3 4
举例: HG20610-97 1212 表示内外加强缠绕垫:材质为碳钢/304/石墨/304
垫片材料代号 标准号 HG20631-97 钢制管法兰缠绕式垫 片(Class系列)
外环材料 名称 无外环 碳钢 0Cr18Ni9(304)
水处理设备标准编号汇总
中国合格评定国家认可委员会实验室认可证书附件(AS L3522)名称：国家海洋局天津海水淡化与综合利用研究所检测中心地址：天津市南开区科研东路1号签发日期：2009年09月11日有效期至：2011年05月25日附件1-1 认可的检测能力范围CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF LABORATORY ACCREDITATION CERTIFICATE(No. CNAS L3522)NAME:Analytical and Testing Center of SDMU( NationalSupervision and Inspection Center for Seawater(brackish water) Utilization Products, ChinaADDRESS：No,1, East Keyan Road, Nankai District, Tianjin,ChinaDate of issue: 2009-09-11 Date of expiry: 2011-05-25 APPENDIX1-1 LIST OF ACCREDITED TESTING SCOPE中国合格评定国家认可委员会实验室认可证书附件(AS L3522)名称：国家海洋局天津海水淡化与综合利用研究所检测中心地址：天津市南开区科研东路1号签发日期：2009年09月11日有效期至：2011年05月25日附件2 认可的授权签字人及其授权签字领域CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF LABORATORY ACCREDITATION CERTIFICATE(No. CNAS L3522)NAME:Analytical and Testing Center of SDMU( NationalSupervision and Inspection Center for Seawater(brackish water) Utilization Products, ChinaADDRESS：No,1, East Keyan Road, Nankai District, Tianjin,ChinaDate of issue: 2009-09-11 Date of expiry: 2011-05-25 APPENDIX2 LIST OF ACCREDITED SIGNATORY AND SCOPE。
原辅材料编码
YKK日字华子(LA50S) 树脂小黑扣1.5cm 小绿扣 桔红小扣1.5cm 饰扣 沙棕色四眼扣 浅兰色四眼扣 红四件扣(灭火毯) 青铜四件扣 黑弹簧扣(指挥服 5mm) 沙棕色弹簧扣（闽华联） 三孔插扣（黑色塑料 MO32-40,B5） 卡扣(德国) YKK三孔插扣(LB38RP) 模具（除草包模具 德国） 插扣（闽华联 M202-25B5） YKK三孔插扣（LB25R-N6） YKK三孔插扣(LB50R) 白色金属挂钩SA3107-38mm 隔热服上衣前门挂钩（3166-24） 隔热服裤子背带挂钩（YME0254-39) 隔热服帽子带铁钩（YM0253-32） 白色金属D型环18mm（钢丝直径2.5） 白色金属D型环30mm 白色金属D型环 皮带头SA1079-38 Y002白夹子(指挥服) 松紧带夹子 铆钉(德国) 铆钉9mm 扣垫(垫片 德国) 汽眼垫片6＃ 四件扣扣垫1.5mm
腰衬 3.5cm 37m/盘 腰衬3.8cm 37m/盘 腰衬4.8cm 37m/盘 F60毡绗棉 F70毡绗棉 阻燃魔术贴 （鑫强 2.5cm毛) 阻燃魔术贴(鑫强 5cm毛) 黑阻燃魔术贴（毛）5cm(VELCRO) 黑色阻燃魔术贴（毛）3.8cm(VELCRO 阻燃魔术贴 （鑫强 1.5cm毛) 黑色阻燃魔术贴（毛）10cm(VELCRO) 黑色阻燃魔术贴（毛）2cm(VELCRO) 黑色阻燃魔术贴（毛）3cm(VELCRO) 阻燃魔术贴(刺)2.5cm（鑫强） 阻燃魔术贴(刺)5cm（鑫强） 黑阻燃魔术贴（刺）2.5cm(VELCRO) 黑色阻燃魔术贴（刺）3.8cm(VELCRO 阻燃魔术贴(刺)1.5cm（鑫强） 黑色阻燃魔术贴（刺）10cm(VELCRO) 黑色阻燃魔术贴（刺）2cm(VELCRO) 黑色阻燃魔术贴（刺）3cm(VELCRO) 黑尼龙魔术贴(毛)2.0cm 红色魔术贴（毛） 2cm 黑尼龙魔术贴(刺)2.0cm 红色魔术贴（刺）2cm 黑尼龙魔术贴(对米)2.5cm 桔红魔术贴(对米)2.5cm 白尼龙魔术贴(对盘)5.0cm 白尼龙魔术贴(对米)5.0cm 黑尼龙魔术贴(对米)5cm 白涤纶加丝乳胶松紧带2.0cm 黑涤纶加丝松紧带3.8cm 黑松紧带(厚)3.8cm
IPC出版物目录
索引IPC-0040 ..................................................9 光电组装与封装技术共163页，2003年5月发布。
IPC-1065 ................................................26 材料声明手册共72页，2005年1月发布。
IPC-1071 ................................................24 印制板制造知识产权保护最佳行业惯例该标准协助印制板制造商为他们在商业、工业、军事以及其他高可靠性市场的客户提供知识产权保护要求。
标准重点保护印制板设计的固有知识产权，确保知识产权从客户流向印制板制造商时印制板中的知识产权受到保护。
制成品的专利和其他这样的“永久保护”不在本文件的范围内。
共15 页，2010年12月发布。
IPC-1331 ................................................26 电加热工艺设备自愿安全标准共11页，2000年3月发布。
IPC-1601 ................................................14 印制板操作和贮存指南这是业界唯一的印制板操作、包装和贮存的指南。
IPC-1601为用户提供指南，保护印制板避免污染、物理损伤、可焊性降低和吸潮。
同时还给出了以下需考虑的因素：包装材料类型和方法、生产环境、产品操作和运输、建立推荐的湿度水平、建立除湿的烘烤曲线以及烘烤对印制板可靠性的影响。
共18页，2010年8月发布。
语言：英语、中文和德语。
IPC-1710A .............................................24 OEM厂商对印制板制造商的资质评定纲要(MQP)IPC-1720A .............................................24 组装资质评定纲要，语言：英语和中文IPC-1730A .............................................24 层压板商的资质评定纲要IPC-1731 ................................................24 战略性原材料提供商资质评定纲要IPC-1751A .............................................26 声明流程管理的通用要求—含修订本1IPC-1751A及修订本1为供应链合作关系的成员间必要的声明提供原则和细节。
艾默生 Rosemount 936开路式有毒气体探测器 数据表
产品说明书00813-0106-4036, Rev AC2023 年 5 月Rosemount™ 936开路式有毒气体探测器Rosemount 9362023 年 5 月典型应用注一般用于周边监控和围栏管控■海上平台和浮式生产储油卸油油船 (FPSO)■石化厂■化工处理厂■气体充装分配站■气体运输和管线■农业■食品饮料行业■废弃物管理■水处理■制药■大型仓库和建筑内容典型应用 (2)功能和优点 (3)订购信息 (4)技术规格 (7)附件 (11)产品认证 (12)性能认证 (13)尺寸图 (14)/Rosemount2023 年 5 月Rosemount 936功能和优点■只需一人安装，维护少■出厂时已校准■三秒内准确可靠的高速响应■在信号屏蔽率高达 95% 的困难环境中，自动增益控制使检测精确■三年保修■高抗误报能力■加热镜面，适合恶劣环境下运行■易于使用，可通过 HART®或 RS-485 Modbus®现场组态■高可靠性-MTBF-最少 10 万个小时Rosemount 9363订购信息您可以单独订购罗斯蒙特 936 部件：光源 (PN 936TXT00XXXX)，探测器 (PN 936RT12XXXXX) 以及附件。
■ 3 秒内准确可靠的高速响应■采用紫外技术■高防误报性■易于安装和维护在线产品组态工具很多产品可使用我们的产品组态工具进行在线组态。
如要使用，请访问。
使用此工具内置的逻辑和持续验证，您可以更快、更准确地度组态您的产品。
型号组别型号组别包含与每个产品相关的详细信息。
确切的型号代码将有所不同；典型型号代码的示例如光源（发射端）和探测器（接收端）所示。
光源（发射端）936T1T00F002SA1探测器（接收端）936R1T262SA1技术规格与订购每种组态的详情请参阅技术规格。
设备购买者必须提供产品材料、选项或组件的技术规格和选型。
光源（发射端）所需型号组件型号Rosemount 9362023 年 5 月/Rosemount2023 年 5 月Rosemount 936发射端量程气体标定外壳类型/导线管产品认证探测器（接收端）所需型号组件型号接收端选择Rosemount 9365Rosemount 9362023 年 5 月气体标定外壳类型/导线管产品认证/Rosemount2023 年 5 月Rosemount 936技术规格一般技术规格被测气体■硫化氢（H2S）或二氧化硫（SO2）■氨气 (NH3)表 1: 探测距离范围响应时间< 3 秒光谱响应200 至 300 nm灵敏度范围视野视线允许对准误差±1 度最小可检测气体体积50 ppm/m温度范围-55 °C 至 65 °C抗误报能力不产生误报，不受阳光照射、烃类火焰或其他外部红外辐射源影响。
热电厂用焊材
热电厂用焊材序言伯乐焊接自1927年就开始致力于提供热电厂的焊接解决方案。
按照世界的填充金属分类可用于锅炉结构、核反应堆、汽轮机及燃气轮机的铸件和其他构件，特别是高温和抗蠕变焊材。
伯乐焊接是您满意的伙伴和供应商。
此外，伯乐焊接为烟气脱硫设备和其他设备提供全面的耐蚀合金焊材，如不锈钢、镍基焊材。
更高的环境要求更高的热效率驱动着电站新材料的发展。
伯乐焊接与领先的钢材制造工厂密切合作，发展与之相匹配的焊材。
最新研发的焊材总是同步于最新研制的母材，如T/P23，T/P24，T/P91和T/P92。
高要求的工业提倡先进的产品标准，稳定的产品质量，最优的操纵性能以保证安全的操作条件和延长当今现代电站的服役寿命。
这就是伯乐焊接的高温抗蠕变焊材能够取得市场领导地位的原因。
伯乐焊接遍布全球的销售网络保证了在世界各大洲80多个国家准确及时的交货。
如您需要了解更多关于伯乐焊接的信息，请联系我们，或登陆伯乐焊接网站：。
焊材索引45伯乐焊接：热电厂用焊材碳钢高强钢67伯乐焊接：热电厂用焊材89伯乐焊接：热电厂用焊材1011伯乐焊接：热电厂用焊材1213伯乐焊接：热电厂用焊材1415伯乐焊接：热电厂用焊材特殊应用1617伯乐焊接：热电厂用焊材1819伯乐焊接：热电厂用焊材20燃烧室水冷壁热交换器联箱省煤器+43 (0) 3862-301-0+43 (0) 3862-301-95193postmaster.bsga@bsga.at伯乐蒂森（上海）贸易有限公司联系人：宋全明博士上海市静安区北京西路669号东展大厦15楼AB座（邮编：200041）电话： +86（0）21 6217 6111 转163直线电话：+86（0）21 3210 0055传真： +86（0）21 6271 1199手机： +86（0）1381 789 9865E-mail：Song.Quanming@Member of the BOHLER-UDDEHOLM Group。
爱斯顿187361型号Moeller系列xPole - PFIM类型F的RCCB说明书
Eaton 187361Eaton Moeller series xPole - PFIM Type F RCCB. Residual current circuit breaker (RCCB), 63A, 4p, 300mA, type G/FGeneral specificationsEaton Moeller series xPole - PFIM Type F RCCB187361PFIM-63/4/03-G/F401508182419980 mm 76 mm 70 mm 0.373 kg RoHS conformIEC/EN 62423 IEC/EN 61008 ÖVE E 8601Product NameCatalog NumberModel Code EANProduct Length/Depth Product Height Product Width Product Weight Compliances CertificationsFour-poleShort time-delayed10 ms delayed63 A10 kA with back-up fuse300 mAPulse-current sensitive - frequency composition (10 Hz, 50 Hz, 1000 Hz)Surge-proof 5 kA 230 V AC / 400 V AC230/400 V230 V440 V4 kV0.3 A0.3 A50 Hz63 A (max. admissible back-up fuse) Other630 A40 A gG/gL630 A10 kA3 kA196 V AC - 456 V AC2ApplicationNumber of polesTripping timeAmperage RatingRated short-circuit strength Fault current rating Sensitivity typeImpulse withstand current Type Voltage ratingVoltage rating (IEC/EN 60947-2)Rated operational voltage (Ue) - maxRated insulation voltage (Ui)Rated impulse withstand voltage (Uimp) Rated fault current - minRated fault current - maxFrequency ratingShort-circuit ratingLeakage current typeRated residual making and breaking capacity Admissible back-up fuse overload - max Rated fault switching capacityRated short-time withstand current (Icw) Surge current capacityTest circuit rangePollution degreeLifespan, electricalResidual current circuit breaker for residential and commercial applications xPole - Switchgear for residential and commercial applicationsPFIM-FResidual current circuit breakersType G/F (ÖVE E 8601)4000 operationsFrame45 mmWidth in number of modular spacings4Built-in width (number of units)70 mm (4 SU)Built-in depth70.5 mmMounting MethodQuick attachment with 2 latch positions for DIN-rail IEC/EN60715DIN railMounting positionAs requiredDegree of protectionIP20IP20, IP40 with suitable enclosureTerminals (top and bottom)Open mouthed/lift terminalsTerminal capacity (solid wire)1.5 mm² - 35 mm²Connectable conductor cross section (solid-core) - min1.5 mm²Connectable conductor cross section (solid-core) - max35 mm²Terminal capacity (stranded cable)16 mm² (2x)Connectable conductor cross section (multi-wired) - min1.5 mm²Connectable conductor cross section (multi-wired) - max16 mm²Terminal capacity (cable)M5 (with cross-recessed screw as defined in EN ISO 4757-Z2,PZ2)Terminal protectionFinger and hand touch safe, DGUV VS3, EN 502742 Nm - 2.4 Nm Red / green0.8 mm - 2 mm20000 operations-35 °C60 °C25-55 °C / 90-95% relative humidity according to IEC 60068-263 A13.4 W-25 °C60 °CMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Tightening torqueContact position indicator colorBusbar material thicknessLifespan, mechanicalPermitted storage and transport temperature - min Permitted storage and transport temperature - max Climatic proofing Rated operational current for specified heat dissipation (In) Equipment heat dissipation, current-dependentAmbient operating temperature - minAmbient operating temperature - max10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distancesDoes not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Z-HK 248432Additional equipment possibleResidual current circuit breakerInterlocking deviceShort-time delayed trippingKLV-TC-4 276241 (Compact enclosure)Z-FW/LP 248296 (Remote control and automatic switching device)Z-RC/AK-4MU 101062 (sealing cover set)eaton-rcd-application-guide-br019003en-en-us.pdfeaton-xpole-residual-current-devices-type-f-brochure-br019005en-en-us.pdfeaton-xpole-pfim-f-rccb-catalog-ca019030en-en-us.pdfDA-DC-03_PFI10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility10.13 Mechanical function Accessories required FeaturesFitted with:FunctionsSpecial featuresUsed withApplication notes BrochuresCataloguesCertification reportsCurrent test marks as per inscriptionMaximum operating temperature is 60 °C: Starting at 40 °C, the max. permissible continuous current decreases by 1.8% for every 1 °CTripping signal contact for subsequent installation Z-NHK 248434Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaeaton-circuit-breaker-xeffect-frcmm-rccb-dimensions.jpg DA-CE-ETN.PFIM-63_4_03-G_F IL019173ZU eaton-xeffect-frcmm-rccb-wiring-diagram-002.jpgDrawingseCAD modelInstallation instructions Wiring diagrams。
泰华前三码
前三碼 464 470 471 480 481 482 483 484 485 486 487 488 490 500
中文描述 UV 膠 潤滑油 擴散油
皮膜劑 脫脂粉 強力脫脂劑 皮膜調整劑 剝漆劑 膠鈦劑 鍍鋅板洗油劑 防銹劑 塑膠組合圖 板類--夾板
英文描述 UV GLUE GREASE
361 釘木針--I型 STAPLES
362 釘木針--T型 STAPLES
370 鉛
LEAD
380 鋼類
STEEL
381 鍍鋅鋼板 35A STEEL
382 38A
STEEL
390 迷你帶
MINI BELT
391 焊錫絲(棒) SOLDER WIRE (CHIP)
392 配件
393 唱片架
RECORD SUPPORT CHROM
165 保險絲電阻 FUSE RESISTOR
166 排阻
RESISTOR ARRAY
170 電晶体
TRANSISTOR
175 磁頭組合
CASSETTE HEAD ASS'Y
179 電話線圈未經加工) TELEPHONE WIRE
180 電線---喇叭線 SPEAKER WIRE
181 電線---電源線 DC/AC CORD
PHOSPHATE FILMING AGENT ACCELERATORS DEFATTING AGENT BEST DEFATTING AGENT PHOSPHATE NEUTRAL IZATION LCOOSLTLOPAIDINATL TITANIUM ACTIVATOR GALVANIZED DEFATING AGENT ANTI-RUST AGENT PLASTIC CAB.ASS'Y DWG. PLYWOOD
【CN110231384A】一种3DrGOFeSub3SubOSub4SubAuNPsHPβCD复合
(19)中华人民共和国国家知识产权局(12)发明专利申请(10)申请公布号 (43)申请公布日 (21)申请号 201910323637.7(22)申请日 2019.04.22(71)申请人 山西大学地址 030006 山西省太原市小店区坞城路92号(72)发明人 梁文婷 张成玲 戎艳琴 马学文 芦冬涛 董川 双少敏 (74)专利代理机构 太原市科瑞达专利代理有限公司 14101代理人 刘宝贤(51)Int.Cl.G01N 27/327(2006.01)(54)发明名称一种3D-rGO/Fe 3O 4-AuNPs/HP-β-CD复合材料的制备方法和应用(57)摘要本发明提供了一种3D -rGO/Fe 3O 4-AuNPs/HP -β-CD复合材料的制备方法和应用。
所述复合材料的制备，是通过Fe 3O 4和AuNPs以及羟丙基-β-环糊精(HP -β-CD)修饰到三维石墨烯表面制得(3D -rGO/Fe 3O 4-AuNPs/HP -β-CD)。
该材料不仅结合了3D -rGO比表面积大、电子传递速率快，Fe 3O 4-AuNPs电催化活性高等优点，还具有HP -β-CD优异的分子识别能力，通过一系列表征证实Fe 3O 4、AuNPs和HP -β-CD成功负载在三维石墨烯结构中，并将其修饰到玻碳电极表面制得新型传感平台用于鸟嘌呤和腺嘌呤的同时检测。
结果表明，鸟嘌呤和腺嘌呤在较宽的线性范围下得到了较低的检测限，大大提高了修饰电极对两种嘌呤检测的灵敏度。
本发明制备的传感器还成功用于实际样品鱼精DNA中鸟嘌呤和腺嘌呤的同时检测。
权利要求书2页 说明书8页 附图4页CN 110231384 A 2019.09.13C N 110231384A权 利 要 求 书1/2页CN 110231384 A1.一种3D-rGO/Fe3O4-AuNPs/HP-β-CD纳米复合材料的制备方法，其特征在于：包括以下步骤：1)Fe3O4-AuNPs纳米粒子的制备：首先将49-51mg Fe3O4加入到40-60mL超纯水中，超声分散后，在N2氛围下再加入170-190μL3-氨丙基三乙氧基硅烷(APTES)，室温下机械搅拌6-8h，黑色沉淀反复洗涤并磁滞分离，最后真空干燥，得到氨基化的Fe3O4(Fe3O4-NH2)；然后取19-21mg Fe3O4-NH2粉末超声分散在15-25mL超纯水中，加入39-41mg金纳米粒子(AuNPs)粉末，室温搅拌2-4h，反复洗涤并磁滞分离，50℃真空干燥7-9h，得到Fe3O4-AuNPs；2)3D-rGO/Fe3O4-AuNPs纳米材料的制备：先将40mg/20mL氧化石墨烯(GO)超声破碎15-25min，在超声溶解下加入75-85mg L-半胱氨酸(L-Cys)，迅速加入550-650μL氨水，置于锥形瓶中，在95℃的油浴中加热，反应3-5h，最后过滤，冷冻干燥得三维石墨烯(3D-rGO)黑色固体粉末；再取制得的3D-rGO29-31mg，超声分散在20-40mL水中，加入29-31mg步骤1)获得的Fe3O4-AuNPs，室温搅拌2-4h，多次洗涤并磁滞分离，冷冻干燥得到3D-rGO/Fe3O4-AuNPs；3)3D-rGO/Fe3O4-AuNPs/HP-β-CD复合材料的制备：取19-21mg步骤2)中所获得的3D-rGO/Fe3O4-AuNPs到50mL锥形瓶，加入22.23-24.23mg 碳二亚胺盐酸盐和12.8-14.8mg N-羟基琥珀酰亚胺，机械搅拌1-3h，然后加入羟丙基-β-环糊精(HP-β-CD)155-165mg，室温搅拌20-30h后，磁滞分离并冷冻干燥，得到最终的产物3D-rGO/Fe3O4-AuNPs/HP-β-CD。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Far East: Methode Electronics Far East, Pte. Ltd. 1 Tuas Lane, Jurong Town • Singapore 638610 65-68615444 • Fax: 65-68614777 Email: sales@.sg • Web: /mefe/index.html
元器件交易网
Modular Telephone Ganged Jacks - M13 Series
A = .433 [11.00] X (No. of Ports -1) + .677 [17.20] B = .433 [11.00] X (No. of Ports -1) + .559 [14.20]
PC Board Layout
A = .500 [12.70] x No. of Ports B = .500 [12.70] x (No. of Ports - .118 [3.00] Surface Mount Option
Type 05
Side View
Bottom View
North and South America: Methode Electronics, Inc. Connector Products 1700 Hicks Road • Rolling Meadows, IL 60008 USA 847-392-3500 • Toll Free: 800-323-6864 • Fax: 847-392-9404 Email: info@ • Web: /connector/index.html
Europe: Methode Electronics Ireland, Ltd. Unit H, Crossagalla Business Park, Ballysimon Rd. • Limerick, Ireland +353 (0) 61 401222 • Fax: +353 (0) 61 401942 Email: info@methode.ie • Web: /main.html
Shielded Jacks
Methode offers a complete line of shielded plugs and jacks which provide a minimum of 20-dB shielding effectiveness from 30 MHz to 400 MHz. Our designs are based on LPC (lowest possible cost) manufacturing and miniature size. Versions include PCB ground and or panel ground with board ground legs. All shielded
Europe: Methode Electronics Ireland, Ltd. Unit H, Crossagalla Business Park, Ballysimon Rd. • Limerick, Ireland +353 (0) 61 401222 • Fax: +353 (0) 61 401942 Email: info@methode.ie • Web: /main.html
元器件交易网
Modular Telephone Ganged Jacks - M13 Series
“D” DIM. 2A = .170" 2B = .144"
Type 12 (shielded & unshielded versions avaialble)
PC Board Layout - 2A, 2B
Shielding Options 2C
C
North and South America: Methode Electronics, Inc. Connector Products 1700 Hicks Road • Rolling Meadows, IL 60008 USA 847-392-3500 • Toll Free: 800-323-6864 • Fax: 847-392-9404 Email: info@ • Web: /connector/index.html
Far East: Methode Electronics Far East, Pte. Ltd. 1 Tuas Lane, Jurong Town • Singapore 638610 65-68615444 • Fax: 65-68614777 Email: sales@.sg • Web: /mefe/index.html
Europe: Methode Electronics Ireland, Ltd. Unit H, Crossagalla Business Park, Ballysimon Rd. • Limerick, Ireland +353 (0) 61 401222 • Fax: +353 (0) 61 401942 Email: info@methode.ie • Web: /main.html
Shielding Options 2A = "D" dim. .170" 2B = "D" dim. .144" PC Board Layout - 2C
products are completely intermateable with unshielded versions.
DIMENSION No. of Ports A B 4 2.33 59.12 2.10 53.34 2.31 58.67 6 3.43 87.06 3.20 81.28 3.41 86.61 8 4.53 115.00 4.30 109.22 4.51 114.55
Far East: Methode Electronics Far East, Pte. Ltd. 1 Tuas Lane, Jurong Town • Singapore 638610 65-68615444 • Fax: 65-68614777 Email: sales@.sg • Web: /mefe/index.html
Europe: Methode Electronics Ireland, Ltd. Unit H, Crossagalla Business Park, Ballysimon Rd. • Limerick, Ireland +353 (0) 61 401222 • Fax: +353 (0) 61 401942 Email: info@methode.ie • Web: /main.html
Type 13
A = .433 [11.00] X (No. of Ports -1) + .677 [17.20] B = .433 [11.00] X (No. of Ports -1) + .559 [14.20]
Type 14
PC Board Layout
North and South America: Methode Electronics, Inc. Connector Products 1700 Hicks Road • Rolling Meadows, IL 60008 USA 847-392-3500 • Toll Free: 800-323-6864 • Fax: 847-392-9404 Email: info@ • Web: /connector/index.html
元器件交易网
Modular Telephone Ganged Jacks - M13 Series
STACKED TELEPHONE JACK - M13X-888-16-XX 8P8C
Type 16
PC Board Layout Unit: Inch / mm
Dimensional: PART NUMBER M13X-688-16-26 M13X-888-16-26 M13X-1288-16-26 PORTS 2x3 2x4 2x6 A 1.78 (45.21) 2.33 (59.18) 3.43 (87.10) B 0.550 (13.97) 1.10 (27.94) 2.20 (55.88) C 1.55 (39.37) 2.10 (53.34) 3.20 (81.28)
Far East: Methode Electronics Far East, Pte. Ltd. 1 Tuas Lane, Jurong Town • Singapore 638610 65-68615444 • Fax: 65-68614777 Email: sales@.sg • Web: /mefe/index.html
元器件交易网
Modular Telephone Ganged Jacks M13 Series - Ordering Information
PART NUMBER LEGEND
M13X - XXX - XX - XX
Type 2
Type 5
OPTIONS: 1, 2A,2B,2C = Shielding Options 6 = Panel Ground Tabs 7 = No Board Locks HOUSING COLOR 1 = Black 2 = Medium Gray HOUSING TYPE 02, 05, 12, 13, 14, 16, 17, 21 PORT SIZE / POSITIONS FILLED 62 = 6 position, 2 contacts (6P2C) 64 = 6 position, 4 contacts (6P4C) 66 = 6 position, 6 contacts (6P6C) 88 = 8 position, 8 contacts (8P8C) NO. OF PORTS 2 through 16 CONTACT PLATING K = Select Gold Flash F = 15 µin. Select Gold 8 = 30 µin. Select Gold 4 = 50 µin. Select Gold SERIES INDICATOR M13 = Modular Telephone Ganged Jacks