UPS835L;中文规格书,Datasheet资料
UPS主机及电池技术参数
内置液晶支持信息显示功能内嵌内置液晶支持信息显示功能内嵌内置液晶支持信息显示功能内嵌webwebweb查询设置页面支持功能按键查询设置页面支持功能按键查询设置页面支持功能按键设设tcpiptcpiptcpip网网支持多路并行高精度采集组网方式支持分布式部署以降低服务器负支持多路并行高精度采集组网方式支持分布式部署以降低服务器负支持多路并行高精度采集组网方式支持分布式部署以降低服务器负支持支持支持loraloralora和和和gsmgsmgsm低功率远距离无线协议低功率远距离无线协议低功率远距离无线协议对接第三方或者已有的传感器包括温湿度传感器压力传感器对接第三方或者已有的传感器包括温湿度传感器压力传感器对接第三方或者已有的传感器包括温湿度传感器压力传感器光照传感器烟雾传感光照传感器烟雾传感光照传感器烟雾传感可内置可内置可内置gsmgsmgsm短信告警模块本地蜂鸣器报警等支持告警信息本短信告警模块本地蜂鸣器报警等支持告警信息本短信告警模块本地蜂鸣器报警等支持告警信息本地存储支持设备固件升级支持宽电压工作地存储支持设备固件升级支持宽电压工作地存储支持设备固件升级支持宽电压工作110110110220v220v220v11路设备路设备路设备诊断诊断诊断维护接口维护接口维护接口可进行人员派障排班管理可进行人员派障排班管理可进行人员派障排班管理通过手机短信将告警事件通过手机短信将告警事件通过手机短信将告警事件进行通知支持短信报平安功能可在每天的预定时间将系统的运行进行通知支持短信报平安功能可在每天的预定时间将系统的运行进行通知支持短信报平安功能可在每天的预定时间将系统的运行情况短信通知相关负责人帮助相关人员每天了解机房运行状态
★电压（V）
12V
★容量（AH）
100AH
L295;中文规格书,Datasheet资料
where: R1 and R2 are the resistance and inductance of the load and V is the voltage available on the load (Vs Vdrop - Vsense). The current increases until the voltage on the external sensing resistor, RS1, reaches the reference voltage, Vref1. This peak current, Ip1, is given by: V
15
VREF2
October 2003
1/7
/
L295
ABSOLUTE MAXIMUM RATINGS
Symbol VS VSS VEN, Vi Vref Io Supply voltage Logic supply voltage Enable and input voltage Reference voltage Peak output current (each channel) - non repetitive (t = 100 µsec) - repetitive (80% on - 20% off; Ton = 10ms) - DC operation Total power dissipation (at Tcase = 75 ″C Storage and junction temperature Parameter Value 50 12 7 7 3 2.5 2 25 - 40 to 150 Unit V V V V A A A W °C
I835使用说明书
郑州交通职业学院专业英语翻译电器名称I835使用用说明学院郑州交通职业学院专业电子信息工程技术班级09级电子信息二班学号200908060830211姓名韩恩防2011年07月16日I835User Manual1．Guidelines for Safe and Efficient UsePlease read this information before using your mobile phone. These instructions are intended for your safety. Please follow these guidelines.Do not use your phone in an area where a potentially explosive atmosphere exists such as chemical plant, gas station.Keep out of children’s reach.Use earphone to make or answer a call during driving for an emergency, otherwise please pull off the road and park before making or answering a call if driving conditions so require.Do not use your phone on plane. Please turn off Auto Power before boarding.Mobile phones may affect the operation of cardiac pacemakers, hearing aid and other medical electronic equipments. Care shall be taken.The warranty covers only original components and parts.Do not attempt to disassemble or modify your phone. Please contact designated service station in case of phone failure.Do not charge your phone without battery mounted.Charge your phone in an area where ventilation and heat-emission is excellent and where is far away from combustible and explosible material.Do not make your phone close to magnetic material such as magnetic disk and credit card to avoid demagnetization.Do not expose your phone to liquid. In case of exposure to liquid, disassemble the battery and contact our designated service station.Do not use your phone in too high or too low temperature; do not expose your phone to extreme sunshine and high humidity.Do not clean your phone with liquid or cloth soaked with detergent.Please abide by corresponding rules and laws when you take a picture or record with your phone.Do not drop, throw or strike your phone to keep shell and components well.<Warning>: The company shall not be responsible for phone failure caused by not abiding by the above guidelines or improper use.In case of discrepancy in this manual and your phone, please refer to your phone.The company shall preserve the right to modify this manual at any time without notification.2．PreviewAbout your deviceThe wireless device described in this guide is approved for use on the (E) GSM 900, 1800 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded.Y our device may have preinstalled bookmarks and links for third-party internet sites.Y ou may also access other third party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.Please make a copy for all the information stored in the phone.Please read the user menu to get detailed safety instruction before you are connecting with other device, don’ t connect with incompatible devices.NetworksTo use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Y our service provider can give you instructions and explain what charges will apply.Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Y our service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Y our device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information.This device supports W AP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, and e-mail require network support for these technologies.3．IntroductionPhone previewAssemble SIM cardWhen you register as a subscriber with a network operator, you get a SIM (Subscriber Identity Module) card.With SIM card you can use all functions of the phone. The SIM card keeps parameters used for communications and your personal data including PIN (Personal Identity Number), phonebook, SMS and other system service.Warning: Do not bend or scratch SIM card; do not expose SIM card to static electricity, dust or water; please contact operator for help in case of SIM lost.Turn off your phone before inserting SIM card.Please assemble SIM card as illustrated in pictures below:Warning: SIM is tiny; please keep out of children’s reach since small children may swallow them!Phone Included Accessoriesstereo earphone Listening to music, watch videos and telephone. To speak using built-in microphone. Press the central button to answer or end a call, when listening music, press this button once to play or pause songs.USB use USB data cable to connect mobile phones and a computer for transferringdata and chargingUSB Power Adapter USB data cable will use USB power adapter link to mobile phones, and then plug it in to a power outlet to charge mobile phoneSIM Card Tools fetch the SIM cardMobile phone holster For the protection of mobile phones, to avoid wear and tear Assemble batteryUse only original batteries and fittings intended for use with your phone. Suggest placing your battery in protection box when it is not used. Please assemble battery as illustrated in pictures below.A new battery may achieve its best performance after continuous full discharge for several times.Charge your battery in time since over-discharge will damage your battery.When battery is charged full, cut down power supply first, and then remove the charger. Connect the charger as illustrated in picture below.Gradual increase of battery bar appears on the screen when charging, and static full battery icon appears after the battery is fully charged.It is normal that battery heats during charging.Battery usagesBattery performance may be affected by many factors such as wireless network configuration, signal strength, operating temperature; functions or settings, phone components, voice and data transmissions or other application modes.To enable best battery performance, please abide by following rules:A new battery or one that has not been used for a long time shall be fully charged; The battery should be charged in temperature close to room temperature;It’s normal for the battery that has been used for long time to take longer time to be charged full. When the talk-time or standby time is noticeably shorter, it’s time to replace your battery. We recommend that you use only batteries approved by our company. Poor quality components will be harmful to your phone and dangerous! When the battery is empty or has not been used for a long time, it may take some time before the battery icon appears on the screen after being connected to charger. Note: take care of environment and your safety and do not dispose randomly! Warning: any short circuit may lead to explosion, fire or personal injury!Switch on and off the phoneDon’t switch on the phone in some forbidden area.Y ou can switch on and off the phone by pressing the power button as showed in the picture.Y ou can lock the screen by touch the button lightly.If the phone request for input the PIN, please input the right PIN (It may displayed as **** after input), then choose the “OK”.When the first time you switch on the phone and it is on the standby mode, it would request you whether get the network service from the ISP. Please affirm or refuse.V olume turnnerY ou can set the volume by the side button while you are talking, listening the music or other multimedia. And this button also control the volume of ring tone, alarm andother voice.AntennaThere is a internal antenna in the phone. Don’t touch the antenna area when it transmit or receive the signal if necessary.It could infect the talking and may cause the phone working under more power request state by touching the antenna.USBWhile the phone is turn off, it could work as a flash memory. When the phone connected with the computer via the data cable, the computer will display two mobile disks(The first one is the phone’s memory, the last one is the external T-FLASH memory). Choose any one of the disk, then you can exchange the data. At the same time connect with computer, the USB is charging the phone.Swing for shift the musicY ou can shift the music by swing the phone while the audio player interface. Clockwise swing will shift to last song, anticlockwise swing will shift to next song. Direction selectThe pictures or video files displayed by the phone could circumgyrate as phone transverse or vertical circumgyrate.Touch screenPress any icon lightly to access the program:Y ou can drag it up or down to scroll the screen. And in some program you also can drag it left or right.Rapid sliding fingers can quickly scroll the list menus，and will not select or activate any of the content.:Y ou can blowup or deflate the pictures by puff or fold your two fingers on the screen. Standby modeWhen the phone is ready, and you didn’t input any words, the phone will switch to the standby mode.4．Phone callTo make calls1、Input phone number，then press the “Call”.2、Press the “Recent” could access the list of recent call records.3、Please refer to the “Contacts” to using the contacts name and phone number.To make international calls, press * for two times then you get the symbol "+"(which will allow you to the local international telephone prefix), then input the country code and Integrated phone number.Y ou can press the volume turner to set the volume of voice while talking.Answer or decline the incoming call.Pick up the call by click the “Answer”; to end the call by click the “Decline”. Decline the incoming call by click the “ Decline or press the power on/off button. Choose the “mute” while you are talking, the ot her side could hear you.CallingTo increase or decrease the volume in the process of calling, press the up or down side key, during a call to choose mute, small keyboard, H-free , add Calls, Hold, contactsneed to press the main button, and then click the icon to enter.1 Touch "mute" then phone ring tones can be changed to mute, call press the "mute" during calling, you can still hear the other speak, and the other side can not hear you speak.2、small keyboard Y ou can use the small keyboard to enter information, you need to click “ hide keyboard” to return dial interface; after using a small keyboard, click on the "end call" to hang up .3、H-free Touch the hands-free, calls is in the state of speaker4、add Calls During a call, if you need to contact third-party call, you can click "Add call"5、Hold click maintain button, the call connection status can be maintained, but you can not be heard with each other will inform you if you have a new incoming call while you are talking(Network service).Y ou can click the “Answer” to pick up the waited call while talking, and the first call would be kept.6、contacts Click "Contacts", you can find the telephone numbers you need and call or send text messages to increaseCall waitingGo to main menu→ Settings → Phone→ Call Waiting→ Active. Then the network Call recordsPlease refer to chapter 5th. Call recordsContactsPlease refer to chapter 9th ContactsV oice Mail SeverV oice Mail Services is a Network Support feature and may be billed. Contact your service provider for more details on billing and settings. This will automatically redirect incoming calls to the V oice Mail centre when you cannot accept a call so that the caller can leave a message on the V oice Mail system of service network. Dial the V oice Mail box number to access your V oice Mail. At most you can set two V oice Mail Servers.Editor: Y ou can add / edit number in short message box, so the voicemail will be more efficient.Connect to the voice: call the voicemail number you set, listen to voice mail. BROADCAST MESSAGEBroadcast Message is a Network Support feature and refers to public messages sent by your network operator. If the broadcast message service is activated in your SIM, you can receive messages on all different subjects from your network operator such as the Weather, Taxis, Hospitals, etc. Contact your network operator for available subjects.Enter the “Broadcast Message” submenu to carryout the following operations. Receive Mode: Set this option “ON” to receive broadcast message send by the service provider.Read Message: Select to read the received broadcast message send by the serviceprovider.Languages: Sets the language for broadcast message.Channel Setting: To set the channel title and ID for the Broadcast Message in order to filter the broadcast you don’t want to receive.I835使用说明书第一节安全事项为了安全、有效地使用您的手机，请您在使用前阅读以下信息：在化工厂、加油站以及其它爆炸物附近时，请您关机。
UPSilon系列STS彩页中文版
增强安全性和可维护性
MGE Upsilon™ STS可在不中断被保护负载供电的情况下， 对需要维护的线路进行隔离。其具有安全保护功能，包 括采用机械连动装置的旁路开关、可钥匙锁定的负载隔 离开关，以及采用密码保护的手动切换。
本手册采用生态纸印刷
施耐德电气信息技术（中国）有限公司
北京 中国北京市朝阳区望京东路 6 号 施耐德电气大厦 电话：86 (10) 8434 6699 传真：86 (10) 6431 5686 邮编：100102
沈阳 中国沈阳市和平区和平北大街 69 号 总统大厦 A 座 1902 室 电话：86 (24) 2281 5008 传真：86 (24) 2281 5783 邮编：110003
MGETM UpsilonTM STS 的功能
便于操作
● STS的LCD图形显示界面支持多语种显示功能，可快速读取测量值并直接设置参数。 ● 前面板上显示直观的模拟图，实时了解电能流向及系统状态。 ● 提供详细的旁路操作流程图。 ● 提供专用端子，用于假负载测试。
● Jbus/ModBus串行接口卡可提供一个PC接口，干接点通信卡则具备可编程远程监测功 能，另外，选配的XML网卡支持以太网通讯。
< 60 dB
IEC 60950 ,GR-63-CORE IEC 61000-6-4 , IEC 61000-6-2 ,EN55011
TÜV , CE
1430 x 610 or 1900 x 715 550 825
193 215
211 225
1900 x 715 -
ISL9V5045S3ST;中文规格书,Datasheet资料
l Ignition IGBTEcoSPARK N-Channel Ignition IGBT500mJ , 450V FeaturesSCIS Energy = 500mJ at T J = 25o C Logic Level Gate Drive ApplicationsAutomotive Ignition Coil Driver Circuits Coil - On Plug ApplicationsGeneral DescriptionThe ISL9V5045S3ST is next generation ignition IGBT that offer outstanding SCIS capability in the industrystandard D2-Pak (TO-263) plastic package. This device is intended for use in automotive ignition circuits,specifically as a coil drivers. Internal diodes provide voltage clamping without the need for external components.devices can be custom made to specific clamp voltages. Contact your nearest Fairchild sales office for more information.Package GATECOLLECTOREMITTERR 2R 1SymbolJEDEC TO-263ABGATE EMITTERCOLLECTOR (FLANGE)D 2-PakN-Channe Qualified to AEC Q101 RoHS Compliant®EcoSPARK ®l Ignition IGBTN-ChanneSwitching Characteristicst d(ON)R Current T urn-On Delay Time-Resistive V CE = 14V , R L = 1Ω, V GE = 5V , R G = 1K ΩT J = 25°C, See Fig. 12-0.74µs t rR Current Rise Time-Resistive- 2.17µs t d(OFF)L Current T urn-Off Delay Time-Inductive V CE = 300V , L = 2mH , V GE = 5V , R G = 1K ΩT J = 25°C, See Fig. 12-10.815µs t fL Current Fall Time-Inductive - 2.815µs SCISSelf Clamped Inductive SwitchingT J = 25°C, L = 650 µH, R G = 1K Ω, V GE = 5V , See Fig. 1 & 2--500mJThermal CharacteristicsR θJCThermal Resistance Junction-CaseTO-263--0.5°C/WTypical CharacteristicsFigure 1. 05101520253035400255075100125150175200t CLP , TIME IN CLAMP (µS)I S C I S , I N D U C T I V E S W I T C H I N G C U R R E N T (A )T J = 25°CR G = 1K Ω, V GE = 5V ,V dd = 14VT J = 150°CSCIS Curves valid for V clamp Voltages of <480VSelf Clamped Inductive SwitchingCurrent vs Time in Clamp Figure 2. 051015202530354012345678910I S C I S , I N D U C T I V E S W I T C H I N G C U R R E N T (A )L, INDUCTANCE (mHy)T J = 150°CR G = 1K Ω, V GE = 5V ,V dd = 14VT J = 25°CSCIS Curves valid for V clamp Voltages of <480VSelf Clamped Inductive SwitchingCurrent vs Inductancel Ignition IGBTN-Channel Ignition IGBTN-ChanneFigure 9. 051015202530255075100125150175I C E , D C C O L L E C T O R T C , CASE TEMPERATURE (°C)DC Collector Current vs CaseTemperatureFigure 10. 0.81.01.21.4-50-25255075100125150175V T H , T H R E S H O L D T J , JUNCTION TEMPERATURE (°C)Threshold Voltage vs JunctionTemperatureFigure 11. L E A K A G E C U R R E N T (µA )T J , JUNCTION TEMPERATURE (°C)1000100.110000100125-2517512575-50050100150V ECS = 24VV CES = 300VV CES = 250VLeakage Current vs JunctionTemperatureFigure 12. 251751257550100150T J , JUNCTION TEMPERATURE (°C)S W I T C H I N G T I M E (µS )20161262I CE = 6.5A, V GE = 5V, R G = 1K ΩResistive t OFFInductive t OFFResistive t ON10141884Switching Time vs JunctionTemperatureFigure 13. 050010001500200025003000510152025C , C A P A C I T A N C E (p F )V CE , COLLECTOR TO EMITTER VOLTAGE (V)C IESFREQUENCY = 1 MHzC OESC RESCapacitance vs Collector to EmitterVoltageFigure 14. Q G , GATE CHARGE (nC)V G E , G A T E T O E M I T T E R V O L T A G E (V )2480102030405035761I G(REF) = 1mA, R L = 0.6Ω, T J = 25°CV CE = 6VV CE = 12VGate Chargel Ignition IGBTN-ChanneFigure 15. Breakdown Voltage 4304354404454504551010010005000B VC E R , B R E A KD O W N R G , SERIES GATE RESISTANCE (Ω)T J = 25°CT J = 175°Cvs Series Gate ResistanceFigure 16. IGBT Normalized Transient Thermal Impedance, Junction to Case10-310-210-110010-610-510-410-310-2Z t h J C , N O R M A L I Z E D T H E R M A L R E S P O N S ET 1, RECTANGULAR PULSE DURATION (s)t 1t 2P DDUTY FACTOR, D = t 1 / t 2PEAK T J = (P D X Z θJC X R θJC ) + T C0.50.20.10.050.020.01SINGLE PULSETest Circuits and WaveformsFigure 17. Inductive Switching Test CircuitR GGCEV CELPULSE GENDUTFigure 18. R G = 1K Ω+-V CEDUT 5VCGELOADR or L t ON and t OFF Switching Test Circuitl Ignition IGBTN-ChanneCTHERM6 2 tl 170e-3RTHERM1 th 6 3e-3RTHERM2 6 5 20e-3RTHERM3 5 4 50e-3RTHERM4 4 3 60e-3RTHERM5 3 2 100e-3RTHERM6 2 tl 127e-3SABER Thermal ModelSABER thermal modelISL9V5045S3S / ISL9V5045S3template thermal_model th tl thermal_c th, tl {ctherm.ctherm1 th 6 = 82e-4ctherm.ctherm2 6 5 = 105e-4ctherm.ctherm3 5 4 = 12e-3ctherm.ctherm4 4 3 = 33e-3ctherm.ctherm5 3 2 = 55e-3ctherm.ctherm6 2 tl = 170e-3rtherm.rtherm1 th 6 = 3e-3rtherm.rtherm2 6 5 = 20e-3rtherm.rtherm3 5 4 = 50e-3rtherm.rtherm4 4 3 = 60e-3rtherm.rtherm5 3 2 = 100e-3rtherm.rtherm6 2 tl = 127e-3}RTHERM4RTHERM6RTHERM5RTHERM3RTHERM2CTHERM4CTHERM6CTHERM5CTHERM3CTHERM2tl 23456CASEl Ignition IGBTN-ChanneThe following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is notAuto-SPM™Build it Now™CorePLUS™CorePOWER™CROSSVOLT™CTL™Current Transfer Logic™ EcoSPARK®EfficientMax™ EZSWITCH™*™*DEUXPEED™®Fairchild®Fairchild Semiconductor®FACT Quiet Series™ FACT®FAST®FastvCore™FETBench™FPS™F-PFS™FRFET®Global Power Resource SMGreen FPS™Green FPS™ e-Series™G max™GTO™IntelliMAX™ISOPLANAR™MegaBuck™MICROCOUPLER™MicroFET™MicroPak™MillerDrive™MotionMax™Motion-SPM™OPTOLOGIC®OPTOPLANAR®®PDP SPM™PowerTrench®PowerXS™Programmable Active Droop™QFET®QS™Quiet Series™RapidConfigure™™Saving our world, 1mW/W/kW at a time™SignalWise™SmartMax™SMART START™SPM®STEALTH™SuperFET™SuperSOT™-3SuperSOT™-6SuperSOT™-8SupreMOS™SyncFET™Sync-Lock™®*The Power Franchise®TinyBoost™TinyBuck™TinyCalc™TinyLogic®TINYOPTO™TinyPower™TinyPWM™TinyWire™TriFault Detect™TRUECURRENT™*μSerDes™UHC®Ultra FRFET™UniFET™VCX™VisualMax™XS™* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) areintended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, orsystem whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.ANTI-COUNTERFEITING POLICYFairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, , under Sales Support.Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. ISL9V5045S3ST l Ignition IGBT N-Channe分销商库存信息: FAIRCHILDISL9V5045S3ST。
PSL603U系列线路保护技术说明书_1.30(传统版本)
国电南自 GB/T 15145-2008
说明书
国电南京自动化股份有限公司
GUODIAN NANJING AUTOMATION CO.，LTD
ห้องสมุดไป่ตู้
PSL 603U 系列 线路保护装置 说明书
编写 审核 批准
V：1.30
国电南京自动化股份有限公司 2010 年 3 月
安全声明
为保证安全、正确、高效地使用装置，请务必阅读以下重要信息： 1.装置的安装调试应由专业人员进行； 2.装置上电使用前请仔细阅读说明书。应遵照国家和电力行业相关规程，并参照说明书对装置进行操 作、调整和测试。如有随机材料，相关部分以资料为准； 3.装置上电前，应明确连线与正确示图相一致； 4.装置应该可靠接地； 5.装置施加的额定操作电压应该与铭牌上标记的一致； 6.严禁无防护措施触摸电子器件，严禁带电插拔模件； 7.接触装置端子，要防止电触击； 8.如要拆装装置，必须保证断开所有地外部端子连接，或者切除所有输入激励量。否则，触及装置内 部的带电部分，将可能造成人身伤害； 9.对装置进行测试时，应使用可靠的测试仪； 10.装置的运行参数和保护定值同样重要，应准确设定才能保证装置功能的正常运行； 11.改变当前保护定值组将不可避免地要改变装置的运行状况，在改变前应谨慎，并按规程作校验； 12.装置操作密码为：99。
2 技术性能及指标 ................................................................................................................................................. 1 2.1 额定电气参数 ............................................................................................................................................ 1 2.2 主要技术性能及指标 ................................................................................................................................ 1 2.3 绝缘和耐湿热性能 .................................................................................................................................... 2 2.4 电磁兼容性能 ............................................................................................................................................ 3 2.5 机械性能 .................................................................................................................................................... 3 2.6 环境大气条件 ............................................................................................................................................ 3
科华恒盛YTR系列智能化高效率在线式UPS说明书
每年节约成本
也就相当于节约了
1kVA UPS
同时增加了
2100kg 标准煤 21026L 净水 同时减少了
290 棵 树
1430kg 碳粉尘 5240kg CO2
157.7kg SO2
3
生态型能源互联网
智能友好 Intelligent & Friendly
大显示高清屏幕 完美视觉体验
科 华 恒 盛 电 源 产 品 及 解 决 方 案 成 功 入 围 人 行、 中 行、 建 行、农行、中国人寿、国税总局、中国电信、中国联通、中国 铁通、中央国家机关等 UPS 设备选型，获军队装备物资采购、 中国石油天然气管道、蓝星化工集团等供应商资格，并与国内 外 知 名 企 业 建 立 了 战 略 合 作 伙 伴 关 系。 众 多 重 要 工 程 都 选 择 KELONG®，如 G20 杭州峰会、天津全运会、港珠澳大桥、广 西防城港核电站、南京青奥、奥运鸟巢、上海世博、三峡枢纽、 金税工程、首都机场、广电总局、中海石油钻井平台、上海商飞、 埃塞俄比亚铁路等。
指标
型号 YTR1101-J YTR1101L-J YTR1102-J YTR1102L -J YTR1103-J YTR1103L-J YTR1106L-J YTR1110-J YTR/B1110-J
电池电压（Vdc）
24
36
48
72
96
192（144~240可设置）
电压范围(Vac)
输 入 频率范围(Hz)
200ms
过载：30s；150% 以上过载：0.5s
输出方式（机架式）
输出插座
接线排 + 插座
整机效率
最高可达95%
直流启动
ups技术参数
ups技术参数UPS技术参数UPS（不间断电源）是一种能够在电网停电或电压异常时提供电力供应的设备。
它采用了一系列的技术参数来确保其稳定可靠的运行。
本文将介绍UPS的一些重要技术参数，并解释其含义和作用。
1. 输出容量（Output Capacity）输出容量是指UPS能够提供的最大电力输出能力。
它通常以千瓦（kW）或千伏安（kVA）为单位表示。
输出容量越大，UPS能够支持的负载就越大。
2. 输入电压范围（Input Voltage Range）输入电压范围是指UPS能够接受的输入电压的范围。
它通常以伏特（V）为单位表示。
输入电压范围越宽，UPS能够适应不同的电网电压波动，提供更稳定的输出电力。
3. 输出电压（Output Voltage）输出电压是指UPS提供的输出电力的电压值。
它通常以伏特（V）为单位表示。
输出电压应与负载设备所需的电压匹配，以确保设备正常工作。
4. 输出频率（Output Frequency）输出频率是指UPS提供的交流输出电力的频率。
它通常以赫兹（Hz）为单位表示。
输出频率应与负载设备所需的频率匹配，以确保设备正常工作。
5. 转换时间（Transfer Time）转换时间是指UPS从电网停电到切换到备用电源之间的时间。
它通常以毫秒（ms）为单位表示。
转换时间越短，UPS切换到备用电源的速度越快，从而减少对负载设备的影响。
6. 电池容量（Battery Capacity）电池容量是指UPS所配备的电池能够提供的电力存储能力。
它通常以安时（Ah）为单位表示。
电池容量越大，UPS能够支持的负载时间就越长。
7. 充电时间（Charging Time）充电时间是指UPS电池从完全放电状态恢复到完全充电状态所需的时间。
它通常以小时（h）为单位表示。
充电时间越短，UPS能够更快地恢复备用电源供应能力。
8. 效率（Efficiency）效率是指UPS在将输入电力转换为输出电力时的能量转换效率。
FL75L05 A;中文规格书,Datasheet资料
FL75R10A Filter Module75Vdc Input Maximum, 10A MaximumFEATURESROHS CompliantSmall size: 25.4mm x 25.4mm x 10.2mm(1.0” x 1.0” x 0.4”)Industry standard footprint and pin-outOptimized for use with high frequency Array board mounted DC/DC convertersPrinted-circuit board mountableISO 9001, TL 9000, ISO 14001, QS 9000,OHSAS 18001 certified manufacturing facilityUL/cUL 60950 (US & Canada) Recognized,VDE 0805 (IEC60950) LicensedDelphi Series Filter Module -FL75L05 A75Vdc input, 5A current RatingThe Delphi series FL75L05 A filter module is the latest offering from aworld leader in power systems technology and manufacturing – DeltaElectronics, Inc. This filter module is designed to reduce the conductedcommon-mode and differential-mode noise on input or output lines ofhigh-frequency switching power supplies and has a maximum currentrating of 5A. It has the industry standard footprint and pin-out. Withcreative design technology and optimization of component placement,Delphi FL75L05 A filter module possesses outstanding electrical andthermal performance, as well as extremely high reliability under highlystressful operating conditions.APPLICATIONSCommon-mode and differential-modefiltering of power supply dc input andoutput lineComputer applicationCommunications equipmentSPECIFICATIONSGENERAL SPECIFICATIONSOUTPUT SPECIFICATIONSInput voltage, continuous Typical 0~75V Output current Ta=75°C, no airflow 5A Input voltage, transient Typical 100V Output current Ta=85°C, no airflow 4A Operation case temperature Typical-40¢ ~ 120¢ Common-modeInsertionLoss50£circuit, 500 kHz (Typ)43dB Storage temperature Typical -55¢ ~ 125¢ Differential-modeInsertionLoss50£circuit, 500 kHz (Typ)45dB Size (1.0”. x 1.0”x 0.4”). 25.4 x 25.4 x 10.2 mmELECTRICAL CHARACTERISTICS CURVESFigure 1:Typical common-mode insertion loss in a 50£circuit Figure 2: Typical differential-mode insertion loss in a 50£circuitInternal SchematicsFigure 3: Internal schematicsTHERMAL CONSIDERATIONSusually the dominant mode of heat transfer.tunnel.Thermal Testing Setupthe power modules are mounted.The following figure shows the wind tunnelcharacterization setup. The filter module is mounted onNote: Wind Tunnel Test Setup Figure Dimensions are in millimeters and (Inches)Figure 4: Wind tunnel test setup figure dimensions are inmillimeters and (inches).The allowed maximum hot spot temperature is defined at 120FL75L05 (Standard) Output Current vs. Ambient Temperature and Air Velocity5055606570758085Ambient Temperature (¢)Figure 6: Output Current vs. Ambient Temperature and AirVelocity @ Vin = 48V (Either Orientation)APPLICATIONNote: C2 through C5 can be 0.01£g F to o.1£g F. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended value indicated in the power module data sheet.Figure 7. Recommended schematic when used as the input filter to a high-frequency dc-to-dc converterNote: Vdc input(+) and Vdc input(-) planes should overlay each other, as should the Vi(+) and Vi(-) planes, as should the Vout(+) and Vout(-) planes. Avoid routing signals or planes under the power module or the filter module. Ensure all connections are low impedance.Figure 8. Recommended layout when used as the input filter to a high-frequency dc-to-dc converterAPPLICATION (Continued)Note: : C2 through C5 and C6 through C9 can be 0.01£g F to o.1£g F. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended value indicated in the power module datasheet.Figure 9. Recommended schematic of filter module with two power modulesFigure 10 shows the experimental result obtained by using this filter module, together with the recommended external components shown in Figures 5 and 6. The Q48SR3R335NR module is one of the Delphi series quarter brick 3.3V, 35A DCDC converters. Measured noise is greatly dependent on layout, grounding, cable orientation, and load characteristics and the variation is possible from various application conditions.Figure 10.Q48SR3R335NR A conducted noise with FL75L05 input filterMECHANICAL DRAWINGTop View Side View Bottom ViewDimensions are in millimeter and (inches).Tolerances : x.xx 0.5 mm (0.02 in), x.xxx 0.25 mm (0.010 in)RECOMMENDED HOLE PATTERNDimensions are in millimeter and (inches).Tolerances : x.xx 0.5 mm (0.02 in), x.xxx 0.25 mm (0.010 in)PART NUMBERING SYSTEMFL 75L05 AProduct Family Input Voltage Product Series Output Current Space Option CodeFL- EMI Filter 75- 0 ~ 75V L – Industry standard05 - 5A A - Standard FunctionsMODEL LISTModule Name Input Voltage (max.) Current Rating (max.)Size (metric) Size (English unit) FL75L05 A 75V 5A 25.4 x 25.4 x 10.2 mm 1.0 in. x 1.0 in. x 0.4 in.FL75L10 A 75V 10A 50.8 x 27.9 x 12.5 mm 2.0 in. x 1.1 in. x 0.5 in.FL75L20 A 75V 20A 50.8 x 40.6 x 12.7 mm 2.0 in. x 1.6 in. x 0.5 in. CONTACT: /dcdcUSA:Telephone:East Coast: (888) 335 8201 West Coast: (888) 335 8208 Fax: (978) 656 3964Email: DCDC@ Europe:Telephone: +41 31 998 53 11Fax: +41 31 998 53 53Email: DCDC@delta-es.twAsia & the rest of world:Telephone: +886 3 4526107 ext 6220Fax: +886 3 4513485Email: DCDC@WARRANTYDelta offers a two (2) year limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice.分销商库存信息: DELTA-PRODUCT-GROUPS FL75L05 A。
UPS设备基本信息统计表
序号 所属单位 运行地点 设备名称 设备型号 BEST1000I 1 变电公司 UPS BEST1000I 2 3 4 5 6 7 8 9 10 11 12 13 14 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 UPS 逆变电源 逆变电源 逆变电源 逆变电源 UPS 逆变电源 逆变电源 UPS 逆变电源 逆变电源 UPS 逆变电源 BEST610 AHA-3104-DC220 E10KVA-A E6KVA-A USVCP 150 Comet S31 AHA-3104-DC220 AHA-3104-DC220 Comet S31 PEW1010-220/220-EN USVCP 100 Comet S31 Comet S31 AHA-3154-LX-PR-DC192 15 变电公司 UPS AHA-3154-LX-PR-DC192 16 17 18 19 20 21 变电公司 变电公司 变电公司 变电公司 变电公司 变电公司 逆变电源 逆变电源 逆变电源 UPS 逆变电源 逆变电源 E10KVA-A E10KVA-A E10KVA-A Comet S11 AHA-3104-DC220 AHA-3104-DC220 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
各站UPS设备基本信息统计
设备 数量 1 额定容量 （kVA） 20 20 10 10 10 6 15 10 10 10 10 15 10 10 10 10 10 10 10 10 5 10 10 设备序列号 OIPX1171801 OIPX1171701 373-33025-00 103052206206 IQB671000001A 040329KE062388017 257874 2148311D8 103052206205 103071000184 214908090 120247-01 1491829 214908085 212A07011 OH153064100550 OH153064100551 1QBG4C000003A 1QBG6800033A 无法查清 20AA1902P 103052206207 103073000672 主机生产 厂商 BEST BEST BEST 普罗太克 科士达 科士达 贝宁 梅兰日兰 普罗太克 普罗太克 梅兰日兰 GUTOR 贝宁 梅兰日兰 梅兰日兰 普罗太克 普罗太克 科士达 科士达 科士达 梅兰日兰 普罗太克 普罗太克 直流电压 电池厂商 （V） 384 384 240 220 220 220 220 240 220 220 240 220 220 240 220 192 192 220 220 220 240 220 220 广东汤浅 广东汤浅 广东汤浅 站内电池 站内电池 站内电池 站内电池 广东汤浅 站内电池 站内电池 广东汤浅 站内电池 站内电池 广东汤浅 站内电池 上海复华 上海复华 站内电池 站内电池 站内电池 广东汤浅 站内电池 站内电池 NP38-12 20 2006年 2005年 2007.10 MF12-100 MF12-100 16 16 2006年 2006年 2006年 2006年 2006年 2007年 2006年 NP65-12 20 2003年 2004 NP65-12 20 2003年 NP65-12 20 2003年 2005年 2007.11.6 规格参数 NP12－100 NP12－100 NP65-12 电池数量 32 32 20 电池组投 运时间 2005年 2005年 2006年 2005年 2007年 2005年 主机投运时 间
ups锂电池技术参数
ups锂电池技术参数UPS锂电池是一种高性能、高能量密度的可充电电池，其具有广泛的应用领域，如UPS系统、电动车、家电产品等。
在UPS系统中，锂电池作为备用电源，可以提供连续稳定的电力供应，保证设备的正常运行。
下面将介绍UPS锂电池的技术参数。
首先是UPS锂电池的容量参数。
容量是衡量电池储存能量的一个重要指标，通常以安时（Ah）为单位。
UPS锂电池的容量可以根据需求进行定制，常见的容量如12V 7Ah、12V 9Ah、12V 20Ah等。
不同容量的UPS锂电池适用于不同的电力需求，用户可以根据设备功率和使用时间来选择合适的容量。
除了容量参数，还有额定电压。
UPS锂电池的额定电压通常为12V，这是由于UPS系统的设计和需求决定的。
额定电压可以理解为电池正常工作时的电压值，在充电和放电过程中会有所变化。
当电池放电到过低电压时，会引起设备故障或损坏，所以保持稳定的额定电压是很重要的。
接下来是循环寿命和自放电率。
循环寿命是指电池可以循环充放电的次数，它直接影响到电池的使用寿命。
一般来说，UPS锂电池的循环寿命在500-1500次左右。
而自放电率则指电池在不工作状态下自行放电的速度，通常以每月百分比（%）表示。
UPS锂电池的自放电率较低，一般在1-3%之间，这意味着即使在长时间不使用的情况下，电池也能保持较长时间的储存电量。
此外，还有充电时间和工作温度范围等参数。
UPS锂电池的充电时间取决于充电器的输出功率和电池容量，通常在4-8个小时左右。
锂电池的工作温度范围较宽，一般为-20℃至60℃。
在低温下，电池的容量和充电效率会有所降低，而在高温下会增加电池的自放电率和寿命的损耗。
最后是安全性能和环保性能。
UPS锂电池的安全性能主要包括过充保护、过放保护、短路保护等功能，以确保使用过程中不会出现意外事故。
另外，锂电池还具有环保性能，无重金属污染，且可以循环使用。
总之，UPS锂电池具有高容量、高循环寿命、低自放电率等优点，在UPS系统中扮演着重要的角色。
UPS空开、线缆、蓄电池配置
UPS空开、线缆、电池配置表目录一、UPS空开、电缆配置 (3)1、高频UPS (3)1-1、输入、输出、电池电流计算方法 (3)1-1-1、输入电流计算方法 (3)1-1-2、输出电流计算方法 (3)1-1-3、电池逆变电流计算方法 (4)1-1-4、电缆大小计算方法 (4)1-2、三进三出高频系列（50节600VDC） (5)1-2-1、160-600KV A）空开配置 (5)1-2-2、（160-600KV A）电缆配置 (5)1-2-3、电池空开接线图 (6)1-3、三进三出高频系列（40节480VDC） (7)1-3-1、（30-120KV A）空开配置 (7)1-3-2、（30-120KV A）电缆配置 (7)1-3-3、电池空开接线图 (8)1-4、三进三出高频系列（32节±192VDC ） (9)1-4-1、（10-60KV A）空开配置 (9)1-4-2、（10-60KV A）电缆配置 (9)1-4-3、电池空开接线图 (10)1-5、单进单出高频系列 (11)1-5-1、（6-20KV A）空开配置 (11)1-5-2、（6-20KV A）电缆配置 (11)1-5-3、电池空开接线图 (11)2、工频UPS (12)2-1、输入、输出、电池电流计算方法 (12)2-1-1、输入电流计算方法 (12)2-1-2、输出电流计算方法 (12)2-1-3、电池逆变电流计算方法 (12)2-1-4、电缆大小计算方法 (13)2-2、三进三出工频系列（29节348VDC） (14)2-2-1、（10-400KV A）空开配置 (14)2-2-2、（10-400KV A）电缆配置 (14)2-2-3、电池空开接线图 (15)2-3、三进三出工频系列（30节360VDC） (16)2-3-1、（10-60KV A）空开配置 (16)2-3-2、（10-60KV A）电缆配置 (16)2-3-3、电池空开接线图 (16)2-4、单进单出工频系列 (17)2-4-1、（4-40KV A）空开配置 (17)2-4-2、（4-40KV A）电缆配置 (17)2-4-3、电池空开接线图 (18)2-5、三进单出系列 (19)2-5-1、（4-40KV A）空开配置 (19)2-5-2、（4-40KV A）电缆配置 (19)2-5-3、电池空开接线图 (20)2-6、单进单出系列 (21)2-6-1、（1-30KV A）空开配置 (21)2-6-2、（1-30KVA）电缆配置 (21)2-6-3、电池空开接线图 (22)3、模块化UPS (23)3-1、输入、输出、电池电流计算方法 (23)3-1-1、输入电流计算方法 (23)3-1-2、输出电流计算方法 (23)3-1-3、电池逆变电流计算方法 (23)3-1-4、电缆大小计算方法 (24)3-2、模块化系列 (25)3-2-1、（10-200KV A）空开配置 (25)3-2-2、（10-200KV A）电缆配置 (25)3-2-3、电池空开接线图 (26)二、UPS电池配置 (27)1、电池配置计算方法 (27)1-1、电流法 (27)1-2、恒功率法 (27)1-3、举例说明 (28)1-4、UPS电池延时配置表 (29)一、UPS空开、电缆配置1、高频UPS1-1、输入、输出、电池电流计算方法1-1-1、输入电流计算方法UPS标称功率（VA）×输出功率因数输入电流（A）＝输入临界电压(V)×整机效率×输入功率因数×SS：三相UPS=3，单相UPS=1例1：已知： UPS功率：100KVA，输入临界电压：176V，输入功率因数：0.99(高频机都可以近似取1),整机效率：0.95，S=3，输出功率因数：0.8计算结果如下：100000×0.8输入电流（A）＝ =160176×0.95×3例2：已知： UPS功率：6KVA，输入临界电压：176V，输入功率因数：0.99(高频机都可以近似取1),整机效率：0.90，S=1，输出功率因数：0.7计算结果如下：6000×0.8输入电流（A）＝ =30176×0.9×11-1-2、输出电流计算方法UPS标称功率输出电流（A）＝输出电压×SS：三相UPS=3，单相UPS=1例1：已知： UPS功率：100KVA，输出电压：220V，S=3。
海洋和海上UPS产品说明说明书
Eaton 1030288Eaton 9155 Marine UPS, 10 kVA, 9 kW, 3ph in, 1ph out, Batteriesfor 25min autonomy time at 70% load, 2 string / 64 pcs of 9 AhGeneral specificationsProduct Name Catalog NumberEaton 9155 Marine UPS1030288Product Length/Depth Product Height736 mm1272 mmProduct Width Product Weight335 mm277 kgWarranty Compliances1 year CE MarkedIEC/EN 60950-1IEC/EN 62040-1IEC/EN 62040-2IEC/EN 62040-360 Hz50 Hz.99 kWTower91 %TowerFixed connection 380 V240 V50 HzHardwiredIP22Free standing model No220 VGray Eaton Marine and Offshore UPS brochureEaton UPS service packages for marine customers Certificate of origin reportEaton 9155 and 9355 Marine UPS 8-15 kVA user’s guide Eaton 9155 and 9355 Marine UPS 8-15 kVA datasheetSecondary Frequency Max Input frequency - min Output power factor WattageForm factorOverall efficiencyMounting MethodInput connectionInput voltage - minOutput voltage - max Secondary Frequency Min External battery connection Degree of Protection Construction typeInternal maintenance bypass Output voltage - minColorTopology BrochuresCompliance information Manuals and user guides Technical data sheetsNumber of output connections fixed connection1kVA rating10 kVARuntime at half load53 minImproved efficiency modeNoneInput nominal voltage400V default (380/400/415V)Input frequency - max60 HzNumber Of Output Connections With Protective Contact (Schuko)Input voltage - max415 VPhase (output)1Integrated functionalityNetwork MangementAuto shutdown functionYesPotential free switch contactYesApplicationMarineInternal battery includedYesPhase (input)3Package contentsUPSQuickstart guideSafety instructionsOutput effective powerFeed typeACVoltage distortion output (linear load) - max 5 %Hot-swappable power modulesNoOutput apparent power10000 VAParallelableParallel for capacity and redundancyOutput frequency50 Hz (50/60 Hz programmable)Primary frequency - min50 HzAudible alarmsYesType Of InterfaceOtherTypeUPSTransition time for full load0 sBattery charger typeABM technologyRuntime at full load23 minSnmpNoPrimary frequency - max60 HzEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
UPS锂电池常见技术参数
UPS锂电池常见技术参数UPS（Uninterruptible Power Supply）是一种用于保障电源供应连续性的设备，其往往依赖于锂电池作为主要的电源储备。
锂电池作为一种高能量密度、长寿命和可靠性较高的能量储存设备，被广泛应用于UPS系统中。
以下是UPS锂电池常见的技术参数及其解释：1. 容量（Capacity）：指的是锂电池储存能量的大小，以安时（Ah）为单位表示。
容量越大，能够提供的电能就越多，UPS系统的备用时间也就越长。
2. 电压（Voltage）：指的是锂电池的电压值，以伏特（V）为单位表示。
大多数UPS系统使用的锂电池电压为12V，但也有一些高容量的UPS系统使用24V或48V的锂电池。
3. 循环寿命（Cycle Life）：指的是锂电池的充放电循环次数，在一定程度上反映了锂电池的使用寿命。
常见的锂电池循环寿命为500-1000次，但也有一些高品质的锂电池能够达到2000次以上。
4. 自放电（Self-discharge）：指的是锂电池在存储期间自动损失的电能，以百分比或每月伏特为单位表示。
较低的自放电率表示电池的自行损失较小，可以更长时间地储存电能。
5. 充电时间（Charging Time）：指的是锂电池从完全放空到完全充满所需的时间。
一般来说，锂电池的充电时间约为5-8小时。
6. 工作温度范围（Operating Temperature Range）：指的是锂电池能够正常工作的环境温度范围。
一般来说，锂电池的工作温度范围为0-45℃，过高或过低的温度都会影响锂电池的性能和寿命。
7. 安全性能（Safety Performance）：指的是锂电池在使用和充电过程中的安全性，包括防止过充、过放、过流和短路等方面的保护措施。
优质的UPS锂电池通常具有多种安全保护功能，以确保电池的正常使用和安全性。
8. 电池管理系统（Battery Management System，简称BMS）：指的是用于监测和控制锂电池充放电过程的设备。
LP8358资料
LP8358150mA,µCap,Low Dropout Voltage Regulator with Power GoodGeneral DescriptionThe LP8358is a µCap,precise CMOS voltage regulator with low Power good output R DSON .It provides up to 150mA and consumes a typical of 10nA in shutdown mode.The LP8358output stage is designed with a push pull output for faster transient recovery response.The LP8358is optimized to work with low value,low cost ceramic capacitors.The output typically require only 1µF of output capacitance for stability.The enable pin can be tied to V IN for easy board layout.The LP8358is designed for portable,battery powered equip-ment applications with small space requirements.The LP8358is available in a 5-pin SOT-23package.Perfor-mance is specified for the −40˚C to +125˚C temperature range and is available in a fixed 1.2V.For other output voltage options,please contact National Semiconductor.Featuresn Low power good R DSON :20Ωn Power good indicatorn Stability with low ESR capacitors n Low ground current:120µA n 150mA output currentn "Zero"shutdown current mode n Fast transient recovery response n Auto discharge n Thermal shutdown nCurrent limitingApplicationsn Processor power-up sequencingn Laptop,notebook and palm top computer n PCMCIA V CC and V PP regulation switchingTypical Application20057919Ordering InformationPackage Part Number Package MarkingTransport Media NSC Drawing5-Pin SOT-23LP8358MF-1.2LH2B1k Units Tape and Reel MF05ALP8358MFX-1.23k Units Tape and ReelFebruary 2003LP8358150mA,µCap,Low Dropout Voltage Regulator with Power Good©2003National Semiconductor Corporation Connection DiagramSOT23-520057921Top ViewPin DescriptionPin NumberPin NamePin Function 1V IN Input Voltage 2GND Ground3ENEnable Input Logic,Logic High =Enabled Logic Low =Shutdown (Do not leave open)4PG Power Good Output 5V OUTOutput VoltageL P 8358 2LP8358 Block Diagram3Absolute Maximum Ratings(Note 1)If Military/Aerospace specified devices are required,please contact the National Semiconductor Sales Office/Distributors for availability and specifications.ESD Tolerance (Note 2)Human Body Model 2000V Junction Temperature 150˚CV IN ,V OUT ,V EN−0.3TO 6.5VSoldering InformationInfrared or Convection (20sec)235˚CWave Soldering (10sec)260˚C (lead temp)Operating RatingsSupply Voltages V IN 2.7V to 6V V EN0V to V INJunction Temp.Range (Note 3)−40˚C to +125˚C Storage Temperature Range −65˚C to 150˚CPackage Themal Resistance SOT23-5235˚C/W Electrical CharacteristicsUnless otherwise specified,all limits guaranteed for T J =25˚C,V IN =2.7V,I L =100µA,C OUT =1µF,V EN ≥2.0V.Boldface limits apply over the entire operating temperature range,−40˚C to 125˚C.Symbol ParameterConditionsMin (Note 5)Typ (Note 4)Max (Note 5)Units V O Output Voltage Accuracy I L =100µA -3-434%∆V O /V O Line Regulation V IN =2.7V to 6V−0.30.3%∆V O /V O Load Regulation I L =0.1mA to 150mA (Note 6)14%I Q Quiescent CurrentV EN ≤0.4V (Shutdown),PG =NC0.011µA I GNDGround Pin Current (Note 5)I L =0mA,V EN ≥2.0V (active),V IN =6V120180µAI L =150mA,V EN ≥2.0V (active),V IN =6V160225PSRR Power Supply Rejection Ratio f =120Hz,C OUT =4.7µF,I L =150mA 62dB I LIMITCurrent Limit V OUT =0V160350mA Thermal ProtectionThermal Shutdown Temperature150˚C Enable Input V IL Enable Input Voltage LevelLogic Low (off),V IN =5.5V 0.4V V IH Logic High (on),V IN =5.5V 2V I IL Enable Input Current V IL ≤0.4V,V IN =5.5V 0.01µA I IHV IH ≥2.0V,V IN =5.5V0.01µAPower Good V PG Low Threshold %of V OUT (PG ON)89%High Threshold %of V OUT (PG OFF)97V OL PG Output Logic-Low VoltageI POWERGOOD =100µA,Fault Condition2.010.0mV R DSON Power Good Output On -ResistanceI POWERGOOD =1mA,Fault Condition 20ΩI PGPower Good Leakage CurrentPower Good Off,V PG =5.5V 0.01µA V PG DelayDelay Time to Power GoodSee Timing Diagram12.15msNote 1:Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.Operating Ratings indicate conditions for which the device is intended to be functional,but specific performance is not guaranteed.For guaranteed specifications and the test conditions,see the Electrical Characteristics.Note 2:Human body model,1.5k Ωin series with 100pF.Note 3:The maximum power dissipation is a function of T J(max),θJA ,and T A .The maximum allowable power dissipation at any ambient temperature is P D =(T J(max)–T A )/θJA .All numbers apply for packages soldered directly into a PC board.Note 4:Typical Values represent the most likely parametric norm.Note 5:All limits are guaranteed by testing or statistical analysis.Note 6:Regulation is measured at constant junction temperature using low duty cycle pulse testing.L P 8358 4Electrical Characteristics (Continued)Note 7:Ground pin current is the regulator quiescent current.The total current drawn from the supply is the sum of the load current plus the ground pin current.Timing Diagram20057915Typical delay time to power good20057925LP83585Typical Performance CharacteristicsUnless otherwise specified,V IN =3.3V,C OUT =1µF,T A =25˚C and powergood pull up resistor =47k Ω.Ground Current vs.Output CurrentGround Current vs.Input Voltage2005790120057902Ground Current vs.Temperature Short Circuit Current vs.Temperature2005790320057904Short Circuit Current vs.Input Voltage Power Good Delay vs.Input Voltge2005790520057906L P 8358 6Typical Performance Characteristics Unless otherwise specified,V IN =3.3V,C OUT =1µF,T A =25˚C and powergood pull up resistor =47k Ω.(Continued)Power Good Delay vs.TemperaturePower Good R DSON vs.Temperature2005790720057924Output Voltage vs.Temperature Output Voltage vs.Input Voltage2005790820057909Output Voltage vs.Output Current Enable Voltage vs.Input Voltage2005791120057922LP83587Typical Performance Characteristics Unless otherwise specified,V IN =3.3V,C OUT =1µF,T A =25˚C and powergood pull up resistor =47k Ω.(Continued)Enable Voltage vs.TemperatureVoltage Noise vs.Frequency2005792320057912PSRR vs.Frequency Power On Reset Delay Time2005791320057914L P 8358 8Application NotesThe LP8358is a linear regulator with power good output designed to be used with a low ESR,low cost ceramic capacitors.EXTERNAL CAPACITORSThe LP8358regulator requires an output capacitor to main-tain stability.The capacitor must be at least1µF or greater. The capacitor can be low-ESR ceramic chip capacitor,how-ever for improved capacitance over temperature,tantalum capacitors can be used.A1µF input capacitor is recommend when the supply capaci-tance is more than10inches away from the device,or when the supply is a battery.X7R dielectric ceramic capacitors are recommended be-cause of their temperature performance.X7R-type capacitor change capacitance by15%over their operating tempera-ture range and are the most stable type of ceramic capaci-tors.Z5U and Y5V dielectric capacitors change value by as much50%and60%respectively over their operating tem-perature range.To use a ceramic chip capacitor with Y5V dielectric,the value must be much higher than a X7/R ce-ramic or a tantalum capacitor to ensure the same minimum capacitance value over the operating temperature range. Tantalum capacitors have a very stable dielectric(10%over their operating temperature range)and can also be used with this device.ENABLE/SHUTDOWNThe LP8358has an active high enable pin that allows the regulator to be disabled.Applying a Logic Level low(<0.4V) to the Shutdown pin will cause the output to turn off,in this state current consumed by the regulator goes nearly to zero. Applying a Logic Level high(>2.0V)enables the output voltage.The enable/shutdown pin must not be left floating;a floating enable pin may cause an indeterminate state on the output.ACTIVE SHUTDOWNThe LP8358is designed with a N-channel MOSFET that acts as a shutdown clamp.The N-channel turns on when the device is disabled to allow the output capacitor and load to dischargePOWER GOODThe power good output is an open-drain output with extreme low R DSON.It is designed essentially to work as a power-on reset generator once the regulated voltage is up and/or afault condition.When a fault condition occurs,the output ofthe power good pin goes low.The power good output comesback up once the output has reached97%of its nominalvalue and1ms to5ms delay has passed,see timing dia-gram.The LP8358internal circuit monitors overcurrent,tempera-ture and falling output voltage.If one of these conditions isflagged this indicates a fault condition.The flagged condition output is fed into an onchip delaycircuit that drives the open drain output transistor.TRANSIENT RESPONSEThe LP8358implements a unique output stage to dramati-cally improve transient response recovery time.The output isa totem-pole configuration with a P-channel MOSFET passdevice and a N-channel MOSFET clamp.The N-channelclamp is a significantly smaller device that prevents theoutput voltage from overshooting when a heavy load isremoved.This feature helps to speed up the transient re-sponse by significantly decreasing transient response recov-ery time during the transition from heavy load to light load.THERMAL BEHAVIORThe LP8358regulator has internal thermal shutdown to pro-tect the device from over heating.Under all operating con-ditions,the maximum junction temperature of the LP8358must be below125˚C.Maximum power dissipation can becalculated based on the output current and the voltage dropacross the part.The maximum power dissipation isP D(MAX)=(T J(MAX)–T A)/θJAθJA is the junction-to-ambient thermal resistance,235˚C/Wfor the LP8358in the SOT23-5package.T A is the maximumambient temperature T J(MAX)is the maximum junction tem-perature of the die,125˚C.When operating the LP8358at room temperature,the maxi-mum power dissipation is425mW.The actual power dissipated by the regulator isP D=(V IN–V OUT)I L+V IN I GNDSubstituting P D(MAX),determined above,for P D and solvingfor the operating condition that is critical to the applicationwill give the maximum operating condition for the regulatorcircuit.To prevent the device from entering thermal shut-down,maximum power dissipation cannot be exceeded.LP83589Physical Dimensionsinches (millimeters)unless otherwise noted5-Pin SOT23-5NSC Package Number MF05ALIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION.As used herein:1.Life support devices or systems are devices or systems which,(a)are intended for surgical implant into the body,or (b)support or sustain life,and whose failure to perform when properly used in accordance with instructions for use provided in the labeling,can be reasonably expected to result in a significant injury to the user.2.A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system,or to affect its safety or effectiveness.National Semiconductor Americas Customer Support CenterEmail:new.feedback@ Tel:1-800-272-9959National SemiconductorEurope Customer Support CenterFax:+49(0)180-5308586Email:europe.support@Deutsch Tel:+49(0)6995086208English Tel:+44(0)8702402171Français Tel:+33(0)141918790National Semiconductor Asia Pacific Customer Support Center Fax:+65-62504466Email:ap.support@ Tel:+65-62544466National SemiconductorJapan Customer Support Center Fax:81-3-5639-7507Email:jpn.feedback@ Tel:81-3-5639-7560L P 8358150m A ,µC a p ,L o w D r o p o u t V o l t a g e R e g u l a t o r w i t h P o w e r G o o dNational does not assume any responsibility for use of any circuitry described,no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.。
安耐威ups说明书
安耐威ups说明书安耐威安装使用：1、使用前请检查蓄电池的外观2、蓄电池的安装必须由人士来进行。
3、电池不可在密闭或者高温的环境下使用（建议循环使用温度为5～35℃.4、安装搬运电池时应均匀受力，受力处应为蓄电池的壳部分，避免损伤极柱。
5、电池在多只并联使用时，请按电池标识“”、“－”极性依次排列，电池之间的距离不能小于－15mm。
6、在电池连接过程中，请戴好防护手套，使用扭矩扳手等金属工具时，请将金属工具进行绝缘包装，避免将金属工具同时接触到电池正、负端子.7、若需要电池并联使用，一般不要超过三组（只）并联.8、和外接设备连接之前，使设备处于断开状态，然后再将蓄电池（组）的正极连接设备的正极，蓄电池（组）的负极连接，并紧固好连接线。
安耐威蓄电池维护使用：均充充电：若是电池组在浮充进程中存在落后电池（单体电池电压低于2.20V），或浮充三个月后，宜进行均充进程，其单体电池电压控制在2.35V，充6～8小时（注重一次均充时刻不宜太长），然后调回到浮充电压值，再调查落后电池电压改变，如电压仍未到位，相隔二周后再均充一次，通常情况下，通过3～6个月浮充，均充后，新电池组的浮充电压会逐渐趋于共同。
浮充充电：在线式电池组是长时刻并联在充电器和负载线路上，作为后备电源的工作方式。
通常情况下，都选用浮充充电，单体电池电压控制在2.25V，并定时调查、记载浮充电压改变。
若是单体电池电压偏低，阐明电池充电缺乏，容量不行，应注重盯梢。
温度抵偿：尽管电池的工作温度规模很宽，可在－15℃～＋45℃规模内运转，电池运转环境温度为25℃左右，若是环境温度改变较大，需用温度系数进行抵偿（－3mV/℃）。
只有正确把握安耐威蓄电池的充电及方式，才能更好维护好安耐威蓄电池。
安耐威蓄电池使用时的注意事项：1、UPS要防止阳光直射，要留足够的通风空间。
2、使用UPS时，务必遵守产品说明书中的有关规定，保证所接的火线、零线、地线的要求，用户不得随意改变其相互的顺序。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
UPS835L
SURFACE MOUNT
POWERMITE 3 Surface Mount Power Package
Features
Maximum Ratings
RATING (Conditions) Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (@ Rated VR and TC = 100°C) Repetitive Peak Surge Current (Non-Repetitive peak surge current @ I0 = 8 Amps ) Storage Temperature Range Operating Temperature Range Voltage Rate of Change (@ Rated VR and TJ = 25°C ) SYMBOL VRRM VRWM VR IO IFSM Tstg , TC TJ dv/dt VALUE 35 35 35 8 100 - 55 to 150 - 55 to 125 1000 UNIT V V V A A °C °C V/us
/
UPS835L
Electrical Characteristics
RATING Maximum Instantaneous Forward Voltage Maximum Instantaneous Reverse Current (Conditions) (IF = 8 Amps, TC = + 25°C) (IF = 8 Amps, TC = +125°C) (Rated Vdc, TC = + 25°C) (Rated Vdc, TC = + 125°C) SYMBOL VF VF IR IR VALUE 0.51 0.41 1.40 35.0 teristics
Thermal Resistance, Junction – to -- Case Thermal Resistance, Junction-to-Ambient Rtjtab Rtja 3 60 °C/W °C/W
MSC1422.PDF 03-09-01
SCHOTTKY BARRIER RECTIFIER 8 AMP 35 VOLT
Mechanical Characteristics
• • • • • Case: Molded Epoxy Meets UL94VO at 1/8 inch Weight: 72 milligrams (approximate) Device Marking UPS835L Lead and Mounting Surface Temperature for Soldering = 260°C Maximum for 10 Seconds
MECHANICAL SPECIFICATIONS
MSC1422.PDF 03-09-01
/
分销商库存信息:
MICROSEMI UPS835L
• • • • • Low Profile – Maximum height of 1.1 mm Footprint Area of 16.51 mm Low VF Provides Higher Efficiency Supplied in 16mm Tape and Reel – 6000 units/reel Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink