1206封装芯片LED（1.0毫米高度）说明书

Prepared date: 12-Aug.-2009
Rev 1
Page: 3 of 10
Prepared by: Changhong Pan
Bin Range Of Dom. Wavelength
Group
Bin
Min.
Max.
W
515
520
X
X
1000 Hrs. 22 PCS. 0/1
5
Low Temperature Storage
Temp. : -40℃
1000 Hrs. 22 PCS. 0/1
6 DC Operating Life
IF = 20 mA
1000 Hrs. 22 PCS. 0/1
7
High Temperature / High Humidity
telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
PART No. 15-21/GHC-XS1T1/2T
Chip Material
InGaN
Emitted Color Brilliant Green
λd
515
-----
Spectrum Radiation Bandwidth
△λ
-----
35
Forward Voltage
VF
2.7
3.3
Reverse Current
IR
-----
-----
Max. 360 --------530 -----
3.7 50
Unit Condition
mcd
deg
nm
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No: DSE-0002034
Prepared date: 12-Aug.-2009
Prepared by: Changhong Pan
15-21/GHC-XS1T1/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ).
∫ 5 min
300 Cycles 22 PCS. 0/1
L : -40℃ 15min
H : +100℃ 5min
3
Thermal Shock
∫ 10 sec
300 Cycles 22 PCS. 0/1
L : -10℃ 5min
4
High Temperature Storage
Temp. : 100℃
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current
IFP
100
mA
(Duty 1/10 @1KHz)
Power Dissipation
Pd
95
mW
Electrostatic Discharge(HBM)
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol Min.
Typ.
Luminous Intensity
Iv
180
-----
Viewing Angle
2θ1/2 -----
130
Peak Wavelength
λp
-----
518
Dominant Wavelength
Technical Data Sheet
1206 Package Chip LED (1.0 mm Height)
15-21/GHC-XS1T1/2T
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
Rev 1
Page: 7 of 10
Prepared by: Changhong Pan
15-21/GHC-XS1T1/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
Rev 1
Page: 6 of 10
Prepared by: Changhong Pan
15-21/GHC-XS1T1/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging
Prepared date: 12-Aug.-2009
Rev 1
Page: 5 of 10
Prepared by: Changhong Pan
Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain with in RoHS compliant version.
Descriptions
․The 15-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
Reel Dimensions
15-21/GHC-XS1T1/2T
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No: DSE-0002034
Prepared date: 12-Aug.-2009
No.
Items
Test Condition
Test Sample Hours/Cycles Size
Ac/Re
Tห้องสมุดไป่ตู้mp. : 260℃±5℃
1
Reflow Soldering
Min 5 sec.
6 Min. 22 Pcs. 0/1
H : +100℃ 15min
2 Temperature Cycle
15-21/GHC-XS1T1/2T
Unit
Condition
nm
IF=20mA
Unit
Condition
mcd
IF =20mA
Everlight Electronics Co., Ltd. Device No: DSE-0002034
Prepared date: 12-Aug.-2009
85℃/85% RH
1000 Hrs. 22 PCS. 0/1
Everlight Electronics Co., Ltd. Device No: DSE-0002034
Prepared date: 12-Aug.-2009
Rev 1
Page: 8 of 10
Package Outline Dimensions
15-21/GHC-XS1T1/2T
0.8
1.6
0.8
1.2
1.5
1.2
1.4 1.5
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No: DSE-0002034
ESD
150
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +90
℃
Soldering Temperature
Reflow Soldering : 260 ℃ for 10 sec. Tsol
Hand Soldering : 350 ℃ for 3 sec.
Rev 1
Page: 4 of 10
Prepared by: Changhong Pan
Typical Electro-Optical Characteristics
15-21/GHC-XS1T1/2T
Everlight Electronics Co., Ltd. Device No: DSE-0002034
520
525
Y
525
530
Bin Range Of Luminous Intensity
Bin
Min.
Max.
S1
180
225
S2
225
285
T1
285
360
Notes:
1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm
2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours.
Prepared date: 12-Aug.-2009
Rev 1
Page: 2 of 10
Prepared by: Changhong Pan
Absolute Maximum Ratings (Ta=25℃)
15-21/GHC-XS1T1/2T
Parameter
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in
Resin Color Water Clear
Everlight Electronics Co., Ltd. Device No: DSE-0002034
Prepared date: 12-Aug.-2009
Rev 1
Page: 1 of 10
Prepared by: Changhong Pan
nm
IF=20mA
nm
V μA VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd. Device No: DSE-0002034