indico100图纸

JW1
321
13 APR 200024 VDC EXTERNAL INPUT POSITION FOR JW2, JW3, JW6, JW7, JW8, JW9,
JW10, JW14, JW15 SHOWN.
JUMPER CONNECTS PINS 2-3; 24 VDC APPLIED EXTERNALLY ACTIV ATES *
THIS PAGE SHOWS THE ROOM INTERF ACE INPUTS. ROOM INTERFACE OUTPUTS ARE SHOWN ON PAGE 2
SPARE /TABLE STEPPER
BUCKY CONTACTS
COLLIMATOR INTERLOCK
REMOTE TOMO
SELECT
TOMO EXPOSURE
ROOM DOOR INTERLOCK THERMAL SWITCH 2
THERMAL SWITCH 1
MULTIPLE SPOT EXPOSURE
I.I.SAFETY
REMOTE FLUORO EXPOSURE ***
REMOTE PREP
REMOTE EXPOSURE
DATA BUS DO..D7
GENERATOR CPU BOARD
ADDITIONAL CIRCUITS ARE USED IN THE AREAS INDICATED **. THESE CIRCUITS ARE NOT
RELEVANT TO THIS ROOM INTERFACE DIAGRAM, HOWEVER, THEY ARE PART OF THE X-RAY EXPOSURE FUNCTION AND ARE SHOWN ON MD-0761
***
14 APR 2000OF INPUTS
LIVE CONTACT 24VDC POSITION
LIVE CONTACT 24VDC
DRY CONTACT
DRY CONTACT POSITION FOR
LIVE CONTACT 24VDC DRY CONTACT
*
**
TOMO / BUCKY 4
SELECT
BUCKY 2SELECT
BUCKY 3SELECT
COLLIMATOR BYPASS TOMO / BUCKY
START
ROOM LIGHT
TUBE 1 / TUBE 2 INDICATOR (COMM)TUBE 1 INDICATOR TUBE 2 INDICATOR
MAG 3
MAG 2
MAG 1
ALE OUTPUT SPARE OUTPUT
GENERATOR CPU BOARD THIS PAGE SHOWS THE ROOM INTERF ACE OUTPUTS. ROOM INTERFACE INPUTS ARE
SHOWN ON PAGE 1
DATA BUS DO..D7
BUCKY 1SELECT
DATA BUS D0..D7CONTINUED ON PAGE 3
DATA BUS D0..D7
125kV 150kV H.T. PRIMARY CURRENT SENSE
FROM PAGE 2
CONVERTER
CONVERTER
H.T. PRIMARY CURRENT CONTINUED ON PAGE 3
DATA BUS
D0..D7
123
REFER TO PAGE 4 FOR LOGIC LEVELS, NOTES, ETC, REFERENCED BY HEXAGONAL SYMBOL: JW1123 JW1123 JW1123
CONVERTER CONVERTER
DATA BUS D0..D7
CONVERTER
SM FILAMENT FEEDBACK
FROM ON PAGE 2
LG FILAMENT FEEDBACK
FROM ON PAGE 2
RAD MA FEEDBACK FROM ON PAGE 2
FLUORO MA FEEDBACK
FROM ON PAGE 2
REFER TO PAGE 2 FOR LOGIC LEVELS, NOTES, ETC, REFERENCED BY HEXAGONAL SYMBOL:
DATA BUS
D0..D7
*REFER TO CHAPTER 2 OF SERVICE MANUAL FOR THE
PROCEDURE TO SET DIP SWITCHES SW1 AND SW2。