蜡处理作业指导书-图文(精)

合集下载
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

1。

目的 Purpose
提高蜡的品质,延长蜡的使用寿命。

2. 适用范围 Applicable scope
蜡处理
3。

参考文件 Conference

4。

定义 Definition
无 No
5。

职责和权限 Duty and Authority
壳模脱蜡和蜡处理人员负责蜡的回收和处理,保证蜡的清洁干净,尽量延长蜡的使用寿命;任何不相关人员不得随意更改蜡处理设备上的任何参数
6 流程图 Flow chart
搅拌除水排水排渣静置除水除渣
7。

执行步骤 Execution step
7.1 搅拌 Beat up
将除水和过滤后的蜡送到搅拌桶中
在 105~115 ℃搅拌 4~5小时,在这个过程中排水 3次以上 .105~115 ℃ beat up 4~5h,In the process dewatering in 3 time more.
Will the water and filter of wax to stir the barrels
7。

2 过滤 Filtrate
通过 120目过滤网将搅拌桶中的蜡放入静置桶中,注意更换过滤网,以防杂质堵塞过滤网至蜡溢出。

By 120 the screen will beat the barrel of the barrel at the replacement filters,in case of impurities filter to block the overflow
7.3 静置
Stand
将温度调到 80~90 ℃,静置 8h 以上.静置期间排水 2~3次.静置好的蜡即可送入压蜡机使用. Keep the temperature of sedimentation vat within 80~90℃ , and sedimentate over 8h。

During sedimentary period, it should be drained at 2~3 times regulary。

Trasmit the settled wax into wax injection machine according to requirement。

蜡处理作业指导书 Mornitoring and Measurement ot product 爱福易镉镍技术(武汉)有限公司编号页码 P82WH04A 82WH04A WH 6 / 6 7.4.注意事项Notice 1 每季度用热水或蒸汽清洗除水桶、静置桶一次. Clean water evaporation vat and sedimentation vat once by hot water or steam monthly 2 每天用温度计测量除水桶内的油温是否与仪表吻合,若误差在 ±5℃以上,必须通知相关人员对仪表进行校验。

check the temperature of oil in vat 1 time per day, compare with temperature which is showen by set。

If the diffrence is more than 5 ℃, info maintenance man to repair the set。

3 按规定要求认真填写蜡处理记录。

record according to ”Record of Wax Treatment in Water Evaporation Vat" and ”Record of Wax Treatment in Sedimentation Vat"。

每次新蜡加入不可超过搅拌桶容积的 10%。

Adding each new wax should not exceed 10% of the volume mixing bucket. 加入新蜡时首先测量搅拌桶剩余蜡的体积。

即:Add a new stirring the wax when the first measurement of the volume of barrels of remaining wax. That T= π*R*R*H*其中Among T π R H 为剩余蜡的体积 The volume of the remaining wa 为圆周率 As pi 搅拌桶的内径半径 Mixing barrel bore radius 搅拌桶内剩余蜡的高度 The height of the remaining wax mixing bucket 根据体
积乘以蜡的密度算出搅拌桶内剩余蜡的重量,每次加入新蜡的重量不可超过这个重量 10%.According to the volume calculated by multiplying the density of wax remaining wax weight mixing bucket, add a new candle each time the weight of not more than 10% of this weight. 使用本文件前,应查询本文件的最新版本。

本文件版权归 AFE 技术(武汉)有限公司所有,未经许可,不得复制与传播。

相关文档
最新文档