ewhm09205
安士能手持单元4
这里一个专利的开关系统确保当开关从3级状态回到1级状态， 在经过2级授权状态时不会让授权功能恢复。授权功能只有当开关完 全复位时，才能再次授权操作。也就是说，只有顺向操作开关（从1 级到2级），授权功能可以激活；而逆向操作开关（从3级到1级）， 授权功能受到保护，不能被激活。
手持操作单元的功能和技术
1级 释放状态
2级 授权状态
带有授权功能的手持操作单元
带有授权功能的手持操作单元相当于传统意义上的授权开关。 授权开关是用手操作的控制装置，配合其他功能开关，并对他们 进行正确连续的操作，就可以通过其发出的指令来操控具有危险性的 机械运作。这些授权开关广泛使用在这样的状况下，操作人员必须直 接在机器和设备的危险区域内进行工作。例如，在安装、编程、检测 或维修工作中需要这种授权开关。机器运作指令只有在授权开关的安 全保护下才能传递，一旦动作有危险，指令可随时被取消或中断，另 外还必须有个可锁止的装置（例如电键式开关）来二次保护，这样只 有通过二次单独的操作才能使机器重新开动。为了使操作者能够在一 个机器的危险区域内使机器产生一个运动，还应该另外设置一个可移 动的授权装置。 通过该授权装置，操作者也必须能够使机器停止运动。这个任务 是由授权开关完成的。每个处于危险区域中的人必须随身带有这样一 个授权装置，以便在出现危险时能够及时采取应对措施。
用于手持操作单元的附件 用于所有结构形式的手持操作单元的附件 用于ＨＢＡ系列手持操作单元的附件 用于ＨＢＥ／ＨＢＬ系列手持操作单元的附件
用于手持操作单元的托架
电子手轮 手轮的功能和技术 ＨＫＤ系列手轮 ＨＫＣ系列手轮 ＨＫＡ系列手轮 ＨＷＡ系列手轮 ＨＷＢ系列手轮 ＨＷＤ系列手轮 ＨＷＥ系列手轮 ＨＷＦ系列手轮 用于手轮的附件
M09产品介绍
300mm(宽)×1387.2mm(高)×260mm(厚)
摄像头/闪光灯 显示屏
身份证刷卡区域
指纹识别
钣金外壳
内置工控板 设备外接接口
考场身 份验证 • 重要会 议场所 在考试考场的出入口对考生进行身份 核查和数据采集，可有效防止替考等 考试舞弊行为。 • 重要会议召开前将参会人员信息输入系统内建库、建
地铁卡口/火 车站/飞机场 核查
模，会议召开时利用警务移动核查终端核查人员身份
信息，避免一些不法分子利用假证件混入会议室。 • 在高速公路检查站、飞机场、长途车站、火车站、地铁各卡口等主要出入 口通过核录终端核查并采集进出人员的身份信息和图像信息，比对身份， 记录行动轨迹，以作为公安情报体系的数据来源。
数据来源：来自设备终端回传的数据。
实时预警：实时显示核查数据和照片
分级预警：根据后台数据的分类，分级显示预警信息（红色：严重/黄色：警告/蓝色：正常） 选择推送：后台可以将实时显示的预警信息根据需求推送给某个民警（设备终端），也可以根据组
织结构进行推送
数据来源：取自设备终端回传的历史数据。 分类查询：可以根据“地点”、“时间”、“设备”进行查询 数据导出：可以根据需要导出EXCEL表格
点，采集设备号等。
人证比对：
对拍摄的人像和读取的身份证图像信息比对并提示比对的相似结果。确定是本
人且本人持有自己的身份证，即两者的信息是否一致。
工作流程：
身份证刷卡同时，采集身份证信息和被核查人员照片。
比对身份证照片和采集的照片，确认人证是否合一 根据提供比对结果，设备给出相应的提示 将身份证信息、照片和比对结果发送到后台 设备采集身份证信息和照片时，会同时保存时间和地点。 发送到后台的信息，包括采集的身份证信息，拍照的照片，采集时间，采集地 点，采集设备号，比对结果等。
赵立鑫一体化多媒体壁板说明书
Page 1 of 2APPLICATIONLeviton patented Single-Gang QuickPlate Tempo Wallplates accept QuickPort ™ snap-in modules to support multimedia station applications. They are ideal for use where portdesignation windows in a one-piece, single-gang, economical flush-mount housing is desired. Wallplates are available with two or four ports.SPECIFICATIONThe wallplate housing shall be a one-piece, single-gang flush-mount style. It shall be available in 2- or 4-port configurations. It shall accept all Leviton QuickPort connectors. Wallplate shall feature clear port ID windows. Wallplate shall connect to the wallboard using Leviton patented design and arm members. It shall be made of high-impact, fire-retardant plastic rated UL 94V-0, and be cULus Listed and compliant with ANSI/TIA-568.0-D specifications.Single-Gang QuickPlate ™ Tempo Wallplates with ID Windows42090-xWSFEATURES•Patented rear wings tighten to wallboard, eliminating the need for a box or mounting brackets and supporting fast,one-step installation with a flush mount•Wings accommodate 5/8 inch and under wallboard thickness•Center lines included as a guide for easy alignment •ID windows act as marking template for cutting hole in wallboard•Includes ID designation window for each wallplate •Patented Design (US Patent 7468487)•Compatible with all individual QuickPort connectors•Individual port configurability allows specification flexibilityDESIGN CONSIDERATIONS•Matches Leviton standard wallplate dimension•Use blanks (41084-0BW) in unused ports for future expansion•To identify ports, use different colored connectors for each application or Leviton pre-printed Port Designation Labels (41080-LEB)STANDARDS & REGULATIONS•cULus Listed (UL 1863 & CAN/CSA-C22.2 No. 182.4)•ANSI/TIA-568.0-DMECHANICAL SPECIFICATIONSDimensions: See page twoMaterials:High-impact, fire-retardant plastic rated UL 94V-0Capacity: Available in 2 or 4 ports Mounting:ScrewsCOUNTRY OF ORIGINUSAWARRANTY INFORMATIONFor Leviton product warranties, go to /warranty42090-2WS42090-4WSRear ViewLeviton is dedicated to designing, developing and manufacturing sustainable high-performance structured cabling and speciality cabling solutions. Network Solutions products are available worldwide in over 100 countries. Visit us online to learn more.NETWORK SOLUTIONS GLOBAL HEADQUARTERS Bothell, WA, USA | /ns(800)824 3005 / +1 (425) 486 2222 | ******************NETWORK SOLUTIONS EUROPEAN HEADQUARTERS Glenrothes, UK | /ns/emea+44 (0) 1592 772124 | *****************************。
EWH系列喇叭
Rara Sanshain 电影洛奇主题曲
Haruyo Koi F1日本赛主题曲
EWH/EWHS-D
间歇音“B,B,B……” 急促音“Purururu……” 连续音“KanKanKan”
急促音“Purara”
急促音“Pi-PoPi-Po”
清脆铃声
连续音“Piroro”
230
120
如何订购
EWH-24A-J
型号 EWH: 8 频道/接点输入
32 频道/二进制输入 EWHS: 1频道
额定电压 24: AC/DC 12/24V 48: DC 48V 100: AC 100V 200: AC 200V
颜色 J: 象牙白色 Y: 黄色 R: 红色
旋律与铃声组合 A: A型 C: C型 D: D型 E: E型
(请勿长时间将喇叭口朝上方放置，否则内部可能沉积灰尘影响音量大小) ● 使用不锈钢支架可调节多种安装方向。
可订制的特殊型号（详细信息敬请咨询） ● 标准设置为NPN对应电路，同时拥有PNP对应的型号。 ● 防护等级IP65产品。
接线图
EWH
保险丝
共通线 1 2 3 4 5 6 7 8
外部接点 频道选择信号线 不连接时两端之间 20V 连接后电流 5mA
间歇音“Pin,Pin,Pin”
Runner
Mamotte Agetai
铃声“PinPon”
急促音“Pi,Pi,Pi”
Oribiao Kikinagara
A September
Doyoubino Koibito
Akino Kehai
冲浪天堂，滑雪天堂
Iro Howaitoburendo
电磁阀线圈部分参数
提供了手动应急操作 (6)，以便在电磁线圈未通电时也可操作 控制阀心 (3)。
型式 .WE 4 ...2X/O…
此型号是具有两个切换位置和两个电磁线圈但不带制动器和 弹簧的方向阀。未定义失电情况下的切换位置。
020318通径42x系列最大工作压力210bar最大流量30lminhad6867目录内容特点订货细节优选型号符号插入式连接器功能剖面技术数据特性曲线性能极限单元尺寸页码1223345667特点直动式电磁方向滑阀具有定位销孔且符合iso4401的油口安装面有关底板信息请参阅产品样本re45050另单湿式插脚直流电磁线圈通过整流器可输入交流电压各连接均采用电气连接带保护的手动应急操作型式4we4d2xeg24n9k44we4d2xofeg24n9k44we4e2xeg24n9k44we4j2xeg24n9k44we4y2xeg24n9k4材料编号r900770141r900770145r900770147r900770148r900770149符号uvwmpqrt1示例
37
1 铭牌 2.1 电磁线圈“a”（插入式连接器颜色，灰色） 2.2 电磁线圈“b”（插入式连接器颜色，黑色） 3 手动应急操作“N9” 4 插入式连接器，不带电路，
符合 DIN EN 1753101-803 1) 5 插入式连接器，带电路，
符合 DIN EN 1753101-803 1) 6 用于油口 A，B，P，T 的相同密封圈
弹簧复位
无弹簧复位 不带制动器弹簧复位
标准阀
24 V DC
带保护的手动应急操作
= 2X
= 无代码
=O = OF
=E = G24
Sennheiser Evolution Wireless Digital EW-DX MKE2 S
DELIVERY INCLUDES• EW-DX EM 2 rack receiver• 2 EW-DX SK bodypack transmitters • 2 MKE 2 lavalier microphones • 2 rod antennas• power supply with country adapters • 2 mic clamps • GA 3 rackmount set • 4 rubber feet• 2 BA 70 rechargeable battery packs • quick guide • safety guide• manufacturer declaration sheetFEATURES EW-DX EM 2• 2 channel half rack (9.5’)• Up to 88 MHz switching bandwidth • PoE IEEE 802.3af Class 0• Equidistant Channel Spacing: 146 channels in standardmode; 293 channels in Link Density Mode • Network enabled for control with Sennheiser ControlCockpit/media control system through a number of 3rd party modules • Clear and easy focused user interface with OLED display • Ethernet connectivity (IPv4 and IPv6)• Secure AES 256 encryption • External PSU 12V/1A • All-metal housingFEATURES EW-DX SK• 3,5 mm jack• 10 mW RF power with up to 100 m/328 ft working range • Charging contacts for in-device charging with CHG 70N • Persistent eInk display - parameters visible on screeneven when device is not powered on • Programmable mute switch - customize the devicedepending on your professional needs • Extended runtime with lithium ion batteries - up to 12hours operation time • Mic input trim control • Metal housingDesigned for Those Who Appreciate Freedom of MovementThis wireless lavalier microphone set consists of 2 x EW-DX SK (wireless bodypack transmitter), 2 x MKE 2 (omni- directional clip-on lavalier microphone), 1 x EW-DX EM 2 rackmout receiver (2 channels) and 2 x BA 70 rechargeablebatteries.PRODUCT VARIANTSEW-DX MKE2 SET (Q1-9)470.2 - 550 MHz Art. no. 509314 EW-DX MKE2 SET (R1-9)520 - 607.8 MHz Art. no. 509315 EW-DX MKE2 SET (S1-10)606.2 - 693.8 MHz Art. no. 509316 EW-DX MKE2 SET (S2-10)614.2 - 693.8 MHz Art. no. 509319 EW-DX MKE2 SET (S4-10)630 - 693.8 MHz Art. no. 509320 EW-DX MKE2 SET (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 509321 EW-DX MKE2 SET (V3-4)925.2 - 937.3 MHz Art. no. 509323 EW-DX MKE2 SET (V5-7)941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz Art. no. 509324 EW-DX MKE2 SET (Y1-3)1785.2 - 1799.8 MHz Art. no. 509327 ACCESSORIESEW-D ASA (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508879 EW-D ASA (T-U-V-W)Active Antenna Splitter694 - 1075 MHz Art. no. 508880 EW-D ASA (X-Y)Active Antenna Splitter1350 - 1805 MHz Art. no. 508881 EW-D ASA CN/ANZ (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508998EW-D AB (Q)Antenna Booster470 - 550 MHz Art. no. 508873 EW-D AB (R)Antenna Booster520 - 608 MHz Art. no. 508874 EW-D AB (S)Antenna Booster606 - 694 MHz Art. no. 508875 EW-D AB (U)Antenna Booster823 - 865 MHz Art. no. 508876 EW-D AB (V)Antenna Booster902 - 960 MHz Art. no. 508877 EW-D AB (Y)Antenna Booster1785 - 1805 MHz Art. no. 508878ADP UHF (470 - 1075 MHz)Passive directional antenna470 - 1075 MHz Art. no. 508863BA 70Rechargeable battery pack for SK and SKM-S Art. no. 508860 L 70 USB Charger for BA 70 rechargeable battery pack Art. no. 508861 EW-D CHARGING SET Set of L 70 USB charger and 2 BA 70 rechargeable battery packs Art. no. 508862 CHG 70N Network-enabled charger for SK, SKM and BA 70Art. no. 509455 CHG 70N + PSU KIT CHG 70N charger with NT 12-35 CS power supply unit Art. no. 509456 EW-D COLOR CODING SET Colored labels for wireless link identification for EM, SKM-S, SK Art. no. 508989 EW-D SK COLOR CODING Colored labels for wireless link identification for SK Art. no. 508990 EW-D SKM COLOR CODING Colored labels for wireless link identification for SKM-S Art. no. 508991 EW-D EM COLOR CODING Colored labels for wireless link identification for EM Art. no. 508992MICROPHONE COMPATIBILITYLavalier and headset microphones compatible with the EW-DX SK bodypack transmitterME 2Omni-directional lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*ME 4Cardioid lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*MKE Essential Omni Omni-directional lavalier microphoneMKE 2 Gold Omni-directional lavalier microphoneModels produced from 2018 onward, featuring a blue serial number plateMKE 1Omni-directional lavalier microphoneME 3Cardioid headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*HSP Essential Omni Omni-directional headset microphoneHSP 2Omni-directional headset microphoneModels produced from March 2020 onward (featuring code 1090 or later)HS 2Omni-directional headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*SL Headmic 1Omni-directional headset microphone* Models produced prior to 2021 will feature a nickel connector. Earlier models may pick up noise when placed close to the transmitter and are not recommended for useMKE 2 (Lavalier Microphone)Transducer principle pre-polarized condensor microphone Pick-up patternomni-directional Sensitivity (free field, no load) (1 kHz) 5 mV/Pa +- 3 dB Max. SPL at 1 kHz 142 dBFrequency response 20 to 20,000 Hz Equivalent noise level A-weighted 26 dB Connector 3.5 mm jack Cable length approx. 1.60 m Supply voltage7.5 VSPECIFICATIONSSystemAudio linkfrequency rangesQ1-9R1-9S1-10S2-10S4-10U1/5V3-4V5-7Y1-3470.2 - 550 MHz 520 - 607.8 MHz 606.2 - 693.8 MHz 614.2 - 693.8 MHz 630 - 693.8 MHz 823.2 - 831.8 MHz & 863.2 - 864.8 MHz 925.2 - 937.3 MHz 941.7 - 951.8 MHz &953.05 - 956.05 MHz &956.65 - 959.65 MHz 1785.2 - 1799.8 MHzBluetooth® Low Energy (BLE) frequency range 2402 - 2480 MHz Audio frequency response 20 Hz - 20 kHz (-3 dB)Audio THD ≤ -60 dB for 1 kHz @ -3 dBfs input level Dynamic range 134 dB System latency 1.9 ms Operating temperature -10 °C - +55 °C (14 °F - 131 °F)Relative humidity5 - 95 % (non-condensing)EW-DX EM 2 (Rack Receiver)Input voltage11 - 13 V ⎓ orPoE IEEE 802.3af Class 0(CAT5e or higher)Input current ≤ 1 ATransmit power (radiated)BLE: max. 10 mW EIRP Audio output power 18 dBu max.Headphone output 2x 70 mW @ 32 ΩEthernetRJ-45 socket, IEEE802.3100Base-TX (half+full duplex) 10Base-T (half+full duplex) (CAT5e or higher)Dimensions 212 x 44 x 189 mm (8.35" x 1.73" x 7.44")Weightapprox. 1000 g (2.2 l bs)(without antennas and power supply)EW-DX SK (Bodypack Transmitter)Input voltage 2.0 - 4.35 V Input current < 300 mAPower supply2 AA batteries 1.5 V(alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHzTransmit power (radiated)Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP)LD mode: 10 mW ERP BLE: max. 10 mW EIRP Dimensions(without antenna)63.5 x 85 x 20 mm (2.5" x 3.35" x 0.79")Weight (without batteries)approx. 115-120 g (0.26-0,27 - l bs)DIMENSIONSEW-DX EM 2DIMENSIONS EW-DX SK953.05 - 956.05 MHz (Y1-3)1785.2-1799.8 MHZ203.8 / 8.02"(V5-7) 157.8 / 6.21"(V3-4)925.2 - 937.3 MHz 157.8 / 6.21"863.2 - 864.8 MHz 166.2 / 6.54"(S4-10) 630 - 693.8 MHz195.8 / 7.71"(Q1-9) 470.2 - 550 MHz 231.8 / 9.13"(R1-9)520 - 607.8 MHz217.8 / 8.57"(S1-10) 606.2 - 693.8 MHz 195.8 / 7.71"(S2-10) 614.2 - 693.8 MHz 195.8 / 7.71"Frequenzbereich Frequency range L (U1/5) 941.7 - 951.8 MHz 956.65 - 959.65 MHz 823.2 - 831.8 MHzARCHITECT‘S SPECIFICATIONEW-DX EM 2 rack receiverThe stationary two-channel receiver with switching diver-sity technology shall be for use with up to two companion transmitters as part of a digital wireless RF transmission system.The receiver shall operate within the following UHF fre-quency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations.The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and And-roid.The receiver shall feature an automatic frequency setup function with spectrum scan functionality in order to es-tablish an equidistant frequency grid with 146 channels in standard mode and 293 channels in Link Density Mode. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤****************************************** shall be 134 dB. System latency shall be 1.9 ms.The receiver shall be menu-driven with an OLED display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting fun-ction, antenna switching diversity, app connection, gain, audio output level, menu and battery status for each of the two associated transmitters. An auto-lock feature shallbe provided to prevent settings from being accidentally altered.The following settings shall be configurable by function buttons and an encoder for each channel in the menu: frequency, channel name, gain, trim, AF output, low cut, AES 256 encryption, test tone, network settings, integrated antenna booster settings, display brightness, device name, auto setup settings for automatic frequency setup.For each of the two channels the receiver shall feature a balanced XLR-3M audio output with a maximum outputof +18 dBu along with an unbalanced 6.3 mm (¼“) audio output with a maximum output of +12 dBu.For secure transmission the receiver shall feature AES 256 encryption.The receiver shall provide a walktest mode for monitoring the RF and AF signal status in the location over time.Two BNC-type input sockets shall be provided for connec-ting the antennas. The receiver shall be usable with active and passive wide range UHF antennas for the entire sup-ported RF spectrum.A headphone output with headphone volume control shall be provided and shall utilize a 6.3 mm stereo jack socket. The receiver shall have an Ethernet port (RJ-45) for remote network-based monitoring and control using the Sennhei-ser Control Cockpit software or the Sennheiser Wireless Systems Manager software.The receiver shall operate on 12 V DC power supplied from the power supply unit or on Power over Ethernet (PoE IEEE 802.af Class 0). Power consumption shall be ≤ 1 A.The receiver shall have a rugged metal housing; dimensi-ons shall be approximately 212 x 44 x 206 mm (8.35“ x 1.73“ x 8.11“). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating tempera-ture shall range from −10 °C to +50 °C (+14 °F to +122 °F). The receiver shall be the Sennheiser EW-DX EM 2.EW-DX SK bodypack transmitterThe bodypack transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmissionsystem.The bodypack transmitter shall operate within the follo-wing UHF frequency ranges, with a switching bandwidthof up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2– 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2– 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7– 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz,1785.2 – 1799.8 MHz. Different frequency variants shall beavailable depending on country-specific regulations.The audio frequency response shall be between 20 Hz and20 kHz (-3 dB). Audio total harmonic distortion (THD) shallbe≤******************************************shall be 134 dB. System latency shall be 1.9 ms.Occupied bandwidth shall be 200 kHz. Transmit power(radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range:12 mW ERP).A programmable mute switch shall be provided for mutingor unmuting either the audio signal or the radio signal. Themute switch can also be deactivated.The bodypack transmitter shall be menu-driven with abacklit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy(BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse.Power shall be supplied to the bodypack transmitter bytwo 1.5 V AA size batteries or by one Sennheiser BA 70rechargeable battery pack. Operating time shall be typical-ly 12 hours with a battery pack and up to 8 hours with AAbatteries.The bodypack transmitter shall feature charging contactsfor direct charging of the transmitter with inserted BA 70battery pack in a Sennheiser CHG 70N network-enabledcharger.The bodypack transmitter’s microphone/line input shallutilize a lockable 3.5 mm Jack socket.The bodypack transmitter shall be compatible with micro-phones for every application: Sennheiser lavalier micro-phones ME 2, ME 4, MKE 1, MKE 2 Gold and MKE EssentialOmni, Sennheiser headset microphones HS 2, HSP 2, HSPEssential Omni, ME 3 and SL Headmic 1.The bodypack transmitter shall have a rugged metalhousing; dimensions shall be approximately 63.5 x 85 x 20mm (2.5” x 3.35” x 0.79“). Weight without batteries shallbe approximately 115 - 120 grams depending on antennalength. Operating temperature shall range from −10 °C to+50 °C (+14 °F to +122 °F).The bodypack transmitter shall be the SennheiserEW-DX SK.Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · 。
横河卡件
型号日本横河YOKOGAW A模块/卡件/配件名称及产品介绍（链接众多型号）输入输出模块AAI141-S模拟输入模块（4～20MA，非隔离），16通道AAI141-H模拟输入模块（4～20MA，非隔离，HART协议），16通道AA V141模拟输入模块（1～5V，非隔离），16通道AA V142模拟输入模块（-10V～10V，非隔离），16通道AAI841-S模拟输入模块（4～20MA输入，4～20MA输出，非隔离），8输入/8输出AAI841-H模拟输入输出模块（4～20MA，非隔离，HART协议），8输入/8输出AAB841模块输入输出模块（1～5V输入，4～20MA输出，非隔离），8输入/8输出AA V542模拟输出模块（-10～10V，非隔离）16通道AAI143 模拟输入模块（4～20MA，隔离），16通道AAI543 模拟输入模块（4～20MA，隔离），16通道AA V144模拟输入模块（-10V～10V，隔离），16通道AA V544模拟输出模块（-10V～10V，隔离），16通道AA T14 1 热电偶/MV输入模块（热电偶：JIS R，J，K，E，T，B，S，N/MV：-100～150MV，隔离），16通道AAR181热电阻输入模块（热电阻：JIS PT100 ohm，隔离），12通道AAI135-S模拟输入模块（4～20MA，隔离通道），8通道AAI135-H模拟输入模块（4～20MA，隔离通道，HART协议），8通道AAI835-S模块输入输出模块（4～20MA，隔离通道），4输入/4输出AAI835-H模块输入输出模块（4～20MA，隔离通道，HART协议），4输入/4输出AA T14 5 热电偶/MV输入模块（热电偶：JIS R，J，K，E，T，B，S，N/MV：-100～150MV，隔离通道），16通道AAR14 5 热电阻/滑线电阻输入模块（热电阻：JIS PT100 ohm/滑线电阻：0～10 kohm，隔离），16通道AAP135脉冲串输入模块（脉冲数计数，0～10KHZ，隔离通道），8通道AAP14脉冲串输入模块，PM1兼容模块（脉冲数计数，0～6KHZ，非隔离），16通道9AAP84 9 脉冲输入/模拟输出模块，PAC兼容模块（脉冲数计数输入，4～20MA输出，非隔离），8输入8输出ADV151数字输入模块（24V DC），32通道ADV551数字输出模块（24V DC），32通道ADV141数字输入模块（100V～120V AC），16通道ADV142数字输入模块（220V～240V AC），16通道ADV157数字输入模块（24V DC，压紧端子专用型），32通道ADV541继电器输出模块（24～110V DC/100～240V AC，隔离），16通道ADV557数字输出模块（24V DC，压紧端子专用型），32通道ADV161数字输入模块（24V DC），64通道ADV561数字输出模块（24V DC），64通道ADR541继电器输出模块（24～110V DC/100～240V AC），16通道ADV859数字输入输出模块ST2兼容模块（隔离通道），16输入/16输出ADV159数字输入模块ST3兼容模块（隔离通道），32通道ADV559数字输出模块ST4兼容模块（隔离通道），32通道ADV869数字输入输出模块ST5兼容模块（每16通道共用负极侧），32输入/32输出ADV851数字输入输出模块（输出噪声，24V DC），16通道ADV169数字输入模块ST6兼容模块（每16通道共用负极侧），64通道ADV569数字输出模块ST7兼容模块（每16通道共用负极侧），64通道ASI133-S模拟电流输入模块（4～20MA，隔离），8通道ASI133-H模拟电流输入模块（4～20MA，隔离），8通道ASI533-S模拟电流输出模块（4～20MA，隔离），8通道ASI533-H模拟电流输出模块（4～20MA，隔离），8通道AST143 -S TC/MV输入模块（TC：B，E，J，N，R，S，T/MV:-100V～150MV,-50～75MV，隔离），16通道ASR13 3-S 热电阻/滑线电阻输入模块（热电阻：PT50，PT100，PT200，PT1000，NI100，NI200，NI120/滑线电阻：0～10 kohm，隔离），8通道ASD143-P数字输入模块（NAMUR兼容，隔离），16通道ASD533-S数字输出模块（I=45MA时，U 〉12V，隔离），8通道AAM10 电流/电压输入模块（简易型），1通道AAM11 电流/电压输入模块，1通道AAM11B电流/电压输入模块（BRAIN对应型），1通道AAM21 MV，热电偶，热电阻输入模块，1通道AAM21JMV，热电偶，热电阻输入模块（符合IEC584-1995，IEC751-1995），1通道AAM21J/RJMV，热电偶，热电阻输入模块（符合IEC584-1995，IEC751-1995），1通道APM11 脉冲输入模块，1通道AAM50 电流/电压输出模块，1通道AAM51 电流/电压输出模块，1通道AMC80 多点控制用模拟输入输出模块，8输入/8输出ADM15R继电器输入模块，16通道ADM55R继电器输出模块，16通道AMM12T电压输入多路转换器模块，16通道AMM22T热电偶输入多路转换器模块，16通道AMM32T热电阻输入多路转换器模块，16通道AMM42T两线式变送器输入多路转换器模块，16通道AMM52T电流输出多路转换器模块，16通道AMM22TJ热电偶输入多路转换器模块（16点，端子型，符合IEC584-1995），16通道AMM32TJ热电阻输入多路转换器模块（16点，端子型，符合IEC751-1995），15通道AMM22MMV输入多路转换器模块，16通道AMM12C电压输入多路转换器模块，16通道AMM22CMV输入多路转换器模块，16通道AMM2 5C 带热电偶接口的MV输入多路转换器模块（15点，连接器型，新增了RJC输入端口），15通道AMM32C热电阻输入多路转换器模块（16点，连接器型），16通道AMM32CJ热电阻输入多路转换器模块（16点，连接器型，符合IEC751-1995），16通道ADM11T接点输入模块（16点端子型），16通道ADM12T接点输入模块（32点端子型），32通道ADM51T接点输出模块（16点端子型），16通道ADM52T接点输出模块（32点端子型），32通道ADM11C接点输入模块（16点连接器型），16通道ADM12C接点输入模块（32点连接器型），32通道ADM51C接点输出模块（16点连接器型），16通道ADM52C接点输出模块（32点连接器型），32通道SAI143-S03模拟输入模块（4～20MA，16通道，通用电缆），16通道SAI143-S33模拟输入模块（4～20MA，16通道，横河专用电缆），16通道SAI143-H03模拟输入模块（4～20MA，HART通信，通用电缆），16通道SAI143-H33模拟输入模块（4～20MA，HART通信，横河专用电缆），16通道SA V144-S03模拟输入模块（1～5V/1～10V，隔离），16通道SA V144-S33模拟输入模块（1～5V/1～10V，横河专用电缆），16通道SAI533-H03模拟输出模块（4～20MA，HART通信，通用电缆），8通道SAI533-H33模拟输出模块（4～20MA，HART通信，横河专用电缆），8通道SDV14数字输入模块（无电压触点，隔离），16通道4-S13SDV144-S33数字输入模块（无电压触点，横河专用电缆），16通道SDV531-S23数字输出模块（24V DC，触点，通用电缆），8通道SDV531-S33数字输出模块（24V DC，触点，横河专用电缆），8通道SDV541-S23数字输出模块（24V DC，触点，通用电缆），16通道SDV541-S33数字输出模块（24V DC，触点，横河专用电缆），16通道通信模块/卡件/总线接口模块ALR111-SRS-232C通信模块（1200bps～115.2kbps），双端口，2□，ALR111-S00、ALR111-S01ALR12 1-S RS-422/RS-485通信模块（1200bps～115.2kbps），双端口，2□，ALR121-S00、ALR121-S01ALE111-SEthernet通信模块（10mbps），1□，ALE111-S00 ALE111-S01ALF111-SFoundation Fieldbus（FF-H1)通信模块（31.25kbps），4□，ALF111-S00、ALF111-S01 ALP111-SPROFIBUS-DPV1通信模块，1□，ALP111-S00、ALP111-S01ACM11 RS-232C通信模块，1通道ACM12 RS-422/RS-485通信模块，1通道ACF11 现场总线通信模块，1通道ACM21 RS-232C通用通信卡件，1通道ACM22 RS-422/RS-485通用通信卡件，1通道ACM71 Ethernet通信模块（PFC口用），1通道ACP71 Profibus通信模块，1通道EB401-11ER总线接口主模块EC401-10通信模块/网关EC401-11通信模块/网关SB301 数据卡SB401 通信模块SB501 通信卡EB402 总线接口模块EB501 总线接口模块EB511-10通信模块VF311 通信模块VI702 网卡/通信模块VF702 网卡/通信模块VC401-通信卡11VI451-1通信卡1A TP502 通信模块AIP502 网络适配器G3环境兼容产品/现场控制单元AFV10现场控制单元（用于FIO、Vnet/IP），AFV10D-S41211DAFV10现场控制单元（用于FIO、Vnet/IP）SANR10ER总线节点单元（19英寸机架安装型）DANR10ER总线节点单元（19英寸机架安装型）SANR11连接单元，ANR11D-420/NDELDA VR10Vnet路由路DANB10ESB总线节点单元（19英寸机架安装型），ANB10D-420/CU2N/NDEL DANB10ESB总线节点单元（19英寸机架安装型）SAFS30S 现场控制单元AFS30现场控制单元DAFG30现场控制单元SAFG30现场控制单元DAFG40现场控制单元DAFS81现场控制单元DAFS82现场控制单元DAFS83现场控制单元DAFS84现场控制单元DAFG81现场控制单元DAFG82现场控制单元DAFG83现场控制单元DAFG84现场控制单元DAFG81现场控制单元SAFG82现场控制单元SAFG83现场控制单元SAFG84现场控制单元SAFS81S 现场控制单元AFS82S 现场控制单元AFS83S 现场控制单元AFS84S 现场控制单元AFG10现场控制单元DAFG20现场控制单元DAFG10现场控制单元SAFG20现场控制单元SAFG40现场控制单元SAFS10S 现场控制单元AFS20S 现场控制单元AFS40S 现场控制单元AFS10现场控制单元DAFS20现场控制单元DAFS40现场控制单元，AFS40D-H4233 DAFF30现场控制单元DAFF30S 现场控制单元AFF50现场控制单元DAFF50S 现场控制单元AFM20现场控制单元DACG10现场控制单元S零部件Y AX10通用工作台1Y AX80通用工作台1LPCKI控制台组件（100V AC/220V AC）TYPCKI控制台组件（100V AC/220V AC）TT9070C空气过滤器，推荐更换周期1年，每隔3个月冲洗一次BT9003B空气过滤器，推荐更换周期1年，每隔3个月冲洗一次YT9050N空气过滤器，推荐更换周期1年，每隔3个月冲洗一次YSCB100开路接线检查器-S0SCB110开路接线检查器-S0S9211FLCD单元，推荐更换周期3年AS9202FLCD单元（无触摸面板），推荐更换周期3年（100V AC）AS9203FLCD单元（无触摸面板），推荐更换周期3年（200V AC）AS9200FLCD单元（有触摸面板），推荐更换周期3年（100V AC）AS9201FLCD单元（有触摸面板），推荐更换周期3年（200V AC）AS9225FLCD单元，推荐更换周期4年AS9388FLCD单元，推荐更换周期3年AS9389FLCD单元，推荐更换周期3年AAIP601 风扇单元，推荐更换周期4年S9002K风扇单元，推荐更换周期4年，100V ACAS9000VK风扇单元，推荐更换周期4年，110/115V ACS9020KA风扇单元，推荐更换周期4年，120V ACS9281FA操作键盘，推荐更换周期取决于使用频率S9284FA操作键盘，推荐更换周期取决于使用频率S9363FA操作键盘，推荐更换周期取决于使用频率S9390FA操作键盘，推荐更换周期取决于使用频率AIP826 操作键盘，推荐更换周期取决于使用频率AIP827 操作键盘，推荐更换周期取决于使用频率S9282FA操作键盘，推荐更换周期取决于使用频率A1519UPAC适配器（用于操作键盘），推荐更换周期5年S9109VK熔丝，推荐更换周期8年，用于PW481，PW482，PW441，PW442，PW444 A1546EF熔丝，推荐更换周期8年，用于PW484S9518VK熔丝，推荐更换周期3年，用于100V AC（用于维修口）A1353EF熔丝，推荐更换周期3年，用于220V AC（用于维修口）S9725VM继电器，推荐更换周期：100000次操作S9049PM保险丝T9528VK滤波器A1193MN钳形滤波器电源模块PW301 电源模块PW302 电源模块PW304 电源模块PW401 电源模块PW402 电源模块PW404 电源模块PW441 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，100V AC：环境温度40℃以下PW442 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，220V AC：环境温度40℃以下PW444-11 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，24V AC：环境温度40℃以下PW481-10 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，100V AC：环境温度40℃以下PW482-10 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，220V AC：环境温度40℃以下PW484 电源模块/铝电解电容器（电源单元内），推荐更换周期8年，24V AC：环境温度40℃以下PW501 电源模块PW502 电源模块PW504 电源模块PW601 电源模块PW602 电源模块PW604 电源模块PW701 电源模块PW702 电源模块PW704 电源模块PW803 电源模块DCS电池S9400UKDCS电池S9325UKDCS电池S9765UKDCS电池S9961UKDCS电池/电源单元，推荐更换周期8年S9129FA电池组，推荐更换周期3年（环境温度30℃以下）；40℃以下1.5年；50℃以下9个月CPU模块CP451 CPU模块CP332DCPU模块CP333DCPU模块CP345-10CPU模块CP703 CPU模块CP401 CPU模块CP451-10CPU模块I/O模块插件箱AMN11 模拟I/O模块用插件箱AMN12 模拟I/O模块用高速型插件箱（只限LFCS）AMN21 继电器I/O模块用插件箱AMN31 端子型I/O模块用插件箱AMN32 连接型I/O模块用插件箱AMN33 通用模块用插件箱AMN34 多点控制模拟I/O模块用插件箱AMN51 通信卡件和Ethernet通信模块用插件箱（只限紧凑型FCS）AMN52 Profibus通用模块用插件箱（只限紧凑型FCS）连接电缆YCB111连接电缆YCB117连接电缆YCB118连接电缆YCB121连接电缆YCB128连接电缆YCB14 1 连接电缆，YCB141-M001（1M），YCB141-M002（2M），YCB141-M005（5M）,YCB141-M010（10M）,YCB141-M140（40M）YCB146连接电缆YCB148连接电缆YCB149连接电缆YCB30 1 连接电缆，YCB301-C020（20CM），YCB301-C100（1M），YCB301-C200（2M），YCB301-C300（3M），YCB301-C400（4M），YCB301-C800（8M）YCB311连接电缆，YCB311-M005（5M），YCB311-M010（10M）AKB13 1 连接电缆，AKB131-M002（2M），AKB131-M005（5M），AKB131-M010（10M），AKB131-M015（15M）AKB13 2 连接电缆，AKB132-M002（2M），AKB132-M005（5M），AKB132-M010（10M），AKB132-M015（15M）AKB13 3 连接电缆，AKB133-M002（2M），AKB133-M005（5M），AKB133-M010（10M），AKB133-M015（15M）AKB13 4 连接电缆，AKB134-M002（2M），AKB134-M005（5M），AKB134-M010（10M），AKB134-M015（15M）AKB13 5 连接电缆，AKB135-M002（2M），AKB135-M005（5M），AKB135-M010（10M），AKB135-M015（15M）AKB13 6 连接电缆，AKB136-M002（2M），AKB136-M005（5M），AKB136-M010（10M），AKB136-M015（15M）AKB141连接电缆AKB142连接电缆AKB161连接电缆AKB162连接电缆AKB33 1 信号连接电缆（用于ADV151与ADV551之间连接），AKB331-M001（1M），1M至50M可选AKB33 2 信号连接电缆（用于ADV141之间的连接），AKB332-M001（1M），1M至50M可选AKB33 3 信号连接电缆（用于ADV142之间的连接），AKB333-M001（1M），1M至50M可选AKB33 4 信号连接电缆（用于ADR541之间的连接），AKB334-M001（1M），1M至50M可选AKB33 5 信号连接电缆（用于AAR145之间的连接），AKB335-M001（1M），1M至50M可选AKB336信号连接电缆（用于ALF111之间的连接），AKB336-M001（1M），1M至50M可选AKB33 7 信号连接电缆（用于ADV161与ADV561之间的连接），AKB337-M001（1M），1M 至50M可选YCB147总线适配器，YCB147-2/BR，YCB147-4/BR 未整理分类卡件、模块、配件CP151CP332CP333ADR561ABC11DABC11SAEA3D 端子板AEA4D 端子板AET4D 端子板AED5D 端子板ARM15A端子板ARM55端子板WARM55端子板CARM55端子板XSARM1端子板5ASARM5端子板5CSARM5端子板5DARS55端子板MARS15端子板BARS15端子板MA1080RZLPCKITYPCKITY AX101Y AX211Y AX801SSC50FCU控制单元DAIP131AIP171AIP181AIP261AIP421AIP481AIP501AIP503AIP511AIP512AIP521AIP571AIP578 AIP579 AIP588 A TSA3 DA TSA3 SA TSB4 DA TSB4 SA TSD3 DA TSD3 SA TSS3 DA TSS3S A TST4 DA TST4 SA TSR3 DA TSR3 S PFCS-S 5310 PFCD-S 5520 YNT51 1S YNT51 1D YNT51 2S YNT51 2D YNT52 1D PRK71 ANS50ANS20。
钨极氩弧焊常用焊丝的牌号与型号之欧阳学文创作
钨极氩弧焊常用焊丝的牌号与型号？欧阳学文钨极氩弧焊常用焊丝的牌号和用途：1.THT491、 ER491 碳钢焊丝：用于船舶、石化、核电等高压管的对接及角焊；2.THT10MnSi、 ER50G：用于薄板及打底焊接结构；3.THT506（TIGJ50）、ER506：用于管道、平板等需作抛光度准确时的焊接4.THT55B2、 ER55B2珠光体耐热钢焊丝：用于工作温度550℃以下的锅炉受热面管子蒸汽管道，高压容器，石油精练设备结构的焊接；5.THT55B2V、 ER55G：用于工作温度550℃以下的锅炉受热面管子蒸汽管道，高压容器，石油精练设备结构的焊接；6.THT307、THS307、 H09Cr21Ni9Mn4Mo 不锈钢焊丝：用于防弹钢、覆面不锈钢及碳钢异材的焊接；7.THT307Si、THS307Si、 H10Cr21Ni10Mn6Si1：用于高锰钢、硬化性耐磨钢及非磁性钢的焊接；8.THT308、THS308、H08Cr21Ni10Si：用于308、301、304等不锈钢结构的焊接；9.THT308L、THS308L、 H03Cr21Ni10Si：用于304L、308L等不锈钢结构的焊接；10.THT308LSi、THS308LSi、H03Cr21Ni10Si1：用于改善填充金属的工艺性、焊接操作性及流动性；11.THT309、THS309、 H12Cr24Ni13Si：用于异种钢的焊接，如碳钢、低合金钢与不锈钢的焊接；12.THT309Mo、THS309Mo、 H12Cr24Ni13Mo2：用于Cr22Ni12Mo2复合钢以及异种钢的焊接；13.THT309L、THS309L、 H03Cr24Ni13Si：用于309S、1Cr13、1Cr17、低碳不锈钢、低碳覆面钢以及异种钢的焊接；14.THT309LSi、THS309LSi、 H03Cr24Ni13Si1：用于309型不锈钢以及304型不锈钢与碳钢的焊接；15.THT309LMo、THS309LMo、 H03Cr24Ni13Mo2：用于异种钢的焊接或韧性较差的马氏体、铁素体不锈钢的焊接。
产品规格说明书(EW-DX SKM-S)
Handheld TransmitterDELIVERY INCLUDES• EW-DX SKM handheld transmitter • MMD 835 microphone module • MZQ 1 microphone clamp • batteries (AA)• pouch • quick guide • safety guide• manufacturer declaration sheetRugged and versatile handheld transmitter with or without switch.FEATURES• 10mW RF power with up to 100m/328ft working range • Charging contacts for in-device charging with CHG 70N • Persistent eInk display - parameters visible on screeneven when device is not powered on • Programmable mute switch on EW-DX SKM-S - custo-mize the device depending on your professional needs • Function buttons - control all the transmitter settingsdirectly from handheld microphone • Extended runtime with lithium-ion batteries - up to 12hours operation time • Standard capsule interface - compatible with a widerange of Sennheiser and Neumann capsules • Mic input trim control •Metal housingHandheld TransmitterSPECIFICATIONSEW-DX SKM (Handheld Transmitter)Input voltage 2.0 - 4.35 VInput current< 300 mAPower supply 2 AA batteries 1.5 V (al-kali manganese) or BA 70rechargeable battery packOccupied bandwidth200 kHzTransmit power (radiated)Audio link: 10 mW ERP(Range Y1-3: 12 mW ERP)LD mode: 10 mW ERPBLE: max. 10 mW EIRPDimensions (ø x l)(incl. MMD 835 microphone module)(without microphone module)50 x 268 mm (1.97" x 10.55")40 x 200 mm (1.57" x 7.87")Weight (without batteries) (incl. MMD 835 microphone module)(without microphone module)approx. 304 g (0.67 l bs) approx. 195 g (7.14 lbs)SystemAudio link frequency ranges Q1-9R1-9S1-10S2-10S4-10U1/5V3-4V5-7X1-6X9-18Y1-3470.2 - 550 MHz520 - 607.8 MHz606.2 - 693.8 MHz614.2 - 693.8 MHz630 - 693.8 MHz823.2 - 831.8 MHz &863.2 - 864.8 MHz925.2 - 937.3 MHz941.7 - 951.8 MHz &953.05 - 956.05 MHz &956.65 - 959.65 MHz1350.2 - 1398.8 MHz1435.2 - 1524.8 MHz1785.2 - 1799.8 MHzBluetooth® Low Energy(BLE) frequency range2402 - 2480 MHzAudio frequencyresponse20 Hz - 20 kHz (-3 dB)Audio THD≤ -60 dB for 1 kHz@ -3 dBfs input level Dynamic range134 dBSystem latency 1.9 msOperating temperature-10 °C - +55 °C(14 °F - 131 °F)Relative humidity 5 - 95 % (non-condensing)Handheld TransmitterPRODUCT VARIANTSEW-DX SKM-S (Q1-9)470.2 - 550 MHz Art. no. 509412 EW-DX SKM-S (R1-9)520 - 607.8 MHz Art. no. 509413 EW-DX SKM-S (S1-10)606.2 - 693.8 MHz Art. no. 509414 EW-DX SKM-S (S1/10)606.2 - 637.8 MHz & 650.2 - 693.8 MHz Art. no. 509415 EW-DX SKM-S (S2-10)614.2 - 693.8 MHz Art. no. 509417 EW-DX SKM-S (S4-10)630 - 693.8 MHz Art. no. 509418 EW-DX SKM-S (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 509419 EW-DX SKM-S (V3-4)925.2 - 937.3 MHz Art. no. 509421 EW-DX SKM-S (V5-7)941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz Art. no. 509422 EW-DX SKM-S (X1-6)1350.2 - 1398.8 MHz Art. no. 509424 EW-DX SKM-S (X9-18)1435.2 - 1524.8 MHz Art. no. 509425 EW-DX SKM-S (Y1-3)1785.2 - 1799.8 MHz Art. no. 509423 EW-DX SKM (Q1-9)470.2 - 550 MHz Art. no. 509426 EW-DX SKM (R1-9)520 - 607.8 MHz Art. no. 509427 EW-DX SKM (S1-10)606.2 - 693.8 MHz Art. no. 509428 EW-DX SKM (S1/10)606.2 - 637.8 MHz & 650.2 - 693.8 MHz Art. no. 509429 EW-DX SKM (S2-10)614.2 - 693.8 MHz Art. no. 509431 EW-DX SKM (S4-10)630 - 693.8 MHz Art. no. 509432 EW-DX SKM (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 509433 EW-DX SKM (V3-4)925.2 - 937.3 MHz Art. no. 509435 EW-DX SKM (V5-7)941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz Art. no. 509436 EW-DX SKM (X1-6)1350.2 - 1398.8 MHz Art. no. 509437 EW-DX SKM (X9-18)1435.2 - 1524.8 MHz Art. no. 509438 EW-DX SKM (Y1-3)1785.2 - 1799.8 MHz Art. no. 509439MICROPHONE COMPATIBILITYMicrophone modules compatible with the EW-DX SKM-S and EW-DX SKM handheld transmitters MMD 835-1Dynamic microphone module with cardioid polar patternMMD 845-1Dynamic microphone module with supercardioid polar patternMME 865-1Pre-polarized condenser microphone module with supercardioid polar patternMMD 935-1Dynamic microphone module with cardioid polar patternMMD 945-1Dynamic microphone module with supercardioid polar patternMMK 965-1Condenser microphone module with switchable cardioid and supercardioid polar pattern MMD 42-1Dynamic microphone module with omni-directional polar patternNeumann KK 204Condenser microphone module with cardioid polar patternNeumann KK 205Condenser microphone module with supercardioid polar patternMM 435Dynamic microphone module with cardioid polar patternMM 445Dynamic microphone module with supercardioid polar patternME 9002Pre-polarized condenser microphone module with omni-directional polar patternME 9004Pre-polarized condenser microphone module with cardioid polar patternME 9005Pre-polarized condenser microphone module with supercardioid polar patternHandheld TransmitterDIMENSIONS40.31.59Mikrofonmodul MMD835 - nur Beispiel microphon module MMD835 - example only341.34268.510.5750.51.99200.77.9156.56.16Handheld TransmitterSennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · EW-DX SKM handheld transmitterThe handheld transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmission system.The handheld transmitter shall operate within the following UHF frequency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1350.2 – 1398.8 MHz, 1435.2 – 1524.8 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depen-ding on country-specific regulations.The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤******************************************shall be 134 dB. System latency shall be 1.9 ms.Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range: 12 mW ERP).The handheld transmitter shall be menu-driven with a backlit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy (BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse.Power shall be supplied to the handheld transmitter by two 1.5 V AA size batteries or by one Sennheiser BA 70 rechar-geable battery pack. Operating time shall be typically 12 hours with a battery pack and up to 8 hours with AA batteries.The handheld transmitter shall feature charging contacts for direct charging of the transmitter with inserted BA 70 battery pack in a Sennheiser CHG 70N network-enabled charger.The handheld transmitter shall utilize Sennheiser’s stan-dard capsule interface serving Sennheiser microphone modules of the evolution wireless and 2000 series and Digital 6000 and 9000 as well as the Neumann KK 204 / 205 microphone modules.The handheld transmitter shall have a rugged metalhousing; dimensions shall be approximately 50 mm (1.97“) in diameter and 268 mm (10.55“) in length including a Sennheiser MMD 835 microphone module. Weight inclu-ding MMD 835 microphone module shall be approximately 304 grams (0.67 lbs). Operating temperature shall range from −10 °C to +50 °C (+14 °F to +122 °F).The handheld transmitter shall be the Sennheiser EW-DX SKM.EW-DX SKM-S handheld transmitterThe handheld transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmission system.The handheld transmitter shall operate within the following UHF frequency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1350.2 – 1398.8 MHz, 1435.2 – 1524.8 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depen-ding on country-specific regulations.The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤******************************************shall be 134 dB. System latency shall be 1.9 ms.Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range: 12 mW ERP).A programmable mute switch shall be provided for muting or unmuting either the audio signal or the radio signal. The mute switch can also be deactivated.The handheld transmitter shall be menu-driven with a backlit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy (BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse.Power shall be supplied to the handheld transmitter by two 1.5 V AA size batteries or by one Sennheiser BA 70 rechar-geable battery pack. Operating time shall be typically 12 hours with a battery pack and up to 8 hours with AA batteries.The handheld transmitter shall feature charging contacts for direct charging of the transmitter with inserted BA 70 battery pack in a Sennheiser CHG 70N network-enabled charger.The handheld transmitter shall utilize Sennheiser’s stan-dard capsule interface serving Sennheiser microphone modules of the evolution wireless and 2000 series and Digital 6000 and 9000 as well as the Neumann KK 204 / 205 microphone modules.The handheld transmitter shall have a rugged metalhousing; dimensions shall be approximately 50 mm (1.97“) in diameter and 268 mm (10.55“) in length including a Sennheiser MMD 835 microphone module. Weight inclu-ding MMD 835 microphone module shall be approximately 304 grams (0.67 lbs). Operating temperature shall range from −10 °C to +50 °C (+14 °F to +122 °F).The handheld transmitter shall be the Sennheiser EW-DX SKM-S.。
Richtek RT9055 双通道低噪声低漏电流调节电路说明书
RT9055®Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.©300mA Dual LDO RegulatorOrdering InformationNote :Richtek products are :❝ RoHS compliant and compatible with the current require-ments of IPC/JEDEC J-STD-020.❝ Suitable for use in SnPb or Pb-free soldering processes.Applications●Cellular Handsets●Battery Powered Equipment ●Hand-Held Instruments●Portable Information AppliancesPin Configurations(TOP VIEW)General DescriptionThe RT9055 is a dual channel, low noise, and low dropout regulator sourcing up to 300mA at each channel. The output voltage range is from 0.9V to 3.5V with an input voltage range from 1.5V to 5.5V.The RT9055 offers 2% accuracy, extremely low dropout voltage and extremely low quiescent current (only 29μA per LDO). The shutdown current is near zero which is suitable for battery powered applications. The RT9055 also provides protection functions such as current limiting,output short circuit protection, and over temperature protection.The RT9055 allows stable operation with very small ceramic output capacitors, hence minimizing required board space and component cost.The RT9055 is available in a WL-CSP-6B 0.8x1.2 package.Features●Wide Operating Voltage Range : 1.5V to 5.5V ●Low Noise for RF Application●No Noise Bypass Capacitor Required ●Fast Response in Line/Load Transient ●TTL Logic Controlled Shutdown Input ●Low Temperature Coefficient●Dual LDO Outputs (300mA/300mA)●Ultra-Low Quiescent Current : 29μA/LDO ●High Output Accuracy 2%●Short Current Protection●Thermal Shutdown Protection ●Current Limit Protection●Short Circuit Thermal Folded Back Protection ●RoHS Compliant and Halogen FreeWSC-CSP-6B 0.8x1.2VOUT2 > VOUT1 is RecommendedMarking InformationFor marking information, contact our sales representative directly or through a Richtek distributor located in your area.RT9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Function Block DiagramTypical Application CircuitV OUT2V OUT1VOUT1VINVOUT2RT9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Absolute Maximum Ratings (Note 1)●Supply Input Voltage, VIN ----------------------------------------------------------------------------------------------- −0.3V to 6V ●Other I/O Pins Voltages ------------------------------------------------------------------------------------------------- −0.3V to 6V ● Power Dissipation, P D @ T A = 25°CWL-CSP-6B 0.8x1.2------------------------------------------------------------------------------------------------------0.670W ●Package Thermal Resistance (Note 2)WL-CSP-6B 0.8x1.2, θJA ------------------------------------------------------------------------------------------------148°C/W ●Lead Temperature (Soldering, 10 sec.)-------------------------------------------------------------------------------260°C ●Junction T emperature -----------------------------------------------------------------------------------------------------150°C●Storage T emperature Range -------------------------------------------------------------------------------------------- −65°C to 150°C ●ESD Susceptibility (Note 3)HBM (Human Body Model)----------------------------------------------------------------------------------------------2kV MM (Machine Model)-----------------------------------------------------------------------------------------------------200VRecommended Operating Conditions (Note 4)●Supply Input Voltage, VIN -----------------------------------------------------------------------------------------------1.5V to 5.5V ●Junction T emperature Range -------------------------------------------------------------------------------------------- −40°C to 125°C ●Ambient T emperature Range -------------------------------------------------------------------------------------------- −40°C to 85°CElectrical Characteristics(V IN = V OUT + 1V, C IN = C OUT = 1μF, T A = −40°C to 85°C, unless otherwise specified)RT9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Note 1. Stresses beyond those listed “Absolute Maximum Ratings ” may cause permanent damage to the device. These arestress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may affect device reliability.Note 2. θJA is measured at T A = 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. The CSPballs connect directly to the internal GND copper plane by 2 vias, the via diameter is about 1mm.Note 3. Devices are ESD sensitive. Handling precaution is recommended.Note 4. The device is not guaranteed to function outside its operating conditions.Note 5. The dropout voltage is defined as V IN − V OUT , which is measured when V OUT is V OUT(NORMAL) − 100mV.Note 6. It is guaranteed by design.RT9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Typical Operating CharacteristicsQuiescent Current vs. Temperature01020304050607080-50-25255075100125Temperature (°C)Q u i e s c e n t C u r r e n t (µA)Output Voltage vs. Temperature1.121.131.141.151.161.171.181.191.201.211.22-50-25255075100125Temperature (°C)O u t p u t V o l t a g e (V)Dropout Voltage vs. Load Current020406080100120140050100150200250300Load Current (mA)D r o p o u t V o l t a g e (m V )Line Transient ResponseTime (100μs/Div)V IN (2V/Div)V IN = 2.8V to 4.2V, I LOAD = 1mAV OUT (20mV/Div)Line Transient ResponseTime (100μs/Div)V IN (2V/Div)V IN = 2.8V to 4.2V, I LOAD = 100mAV OUT (20mV/Div)Line Transient Response Time (100μs/Div)V IN (2V/Div)V IN = 2.8V to 4.2V, I LOAD = 10mAV OUT (20mV/Div)RT9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Line Transient ResponseTime (100μs/Div)V IN (2V/Div)V IN = 2.8V to 4.2V, I LOAD = 300mAV OUT (20mV/Div)Load Transient ResponseTime (250μs/Div)V OUT1(50mV/Div)V IN = 1.8V, I LOAD = 1mA to 100mAI OUT(100mA/Div)Load Transient Response Time (250μs/Div)V OUT1(50mV/Div)V IN = 1.8V, I LOAD = 1mA to 300mAI OUT(100mA/Div)Power On from ENTime (50μs/Div)V EN (1V/Div)V OUT1 = V OUT2 = 1.2V, I OUT1 = I OUT2 = 100mAV OUT1(1V/Div)V OUT2(1V/Div)V IN = 3.6V, V EN = 2VPower Off from EN Time (50μs/Div)V EN (1V/Div)V OUT1 = V OUT2 = 1.2V, I OUT1 = I OUT2 = 100mAV OUT1(1V/Div)V OUT2(1V/Div)V IN = 3.6V, V EN = 2VVOUT1 NoiseTime (5ms/Div)V OUT(100μV/Div)V IN = V EN = 4.5V, I LOAD = 1mART9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.-70-60-50-40-30-20-100101001000100001000001000000Frequency (Hz)P S R R (d B )10 1001K 10K 100K 1M (Hz)VOUT2 NoiseTime (5ms/Div)V OUT(100μV/Div)V IN = V EN = 4.5V, I LOAD = 1mART9055©Copyright 2014 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation.Applications InformationLike any low-dropout regulator, the external capacitors used with the RT9055 must be carefully selected for regulator stability and performance. Using a capacitor whose value is >1μF on the RT9055 input and the amount of capacitance can be increased without limit. The input capacitor must be located a distance of not more than 0.5 inch from the input pin of the IC and returned to a clean analog ground.Any good quality ceramic or tantalum can be used for this capacitor. The capacitor with larger value and lower ESR (equivalent series resistance) provides better PSRR and line-transient response.The output capacitor must meet both requirements for minimum amount of capacitance and ESR in all LDOs application. The RT9055 is designed specifically to work with low ESR ceramic output capacitor in space-saving and performance consideration. Using a ceramic capacitor whose value is at least 1μF with ESR is > 20m Ω on the RT9055 output ensures stability. The RT9055 still works well with output capacitor of other types due to the wide stable ESR range. Figure 1 shows the curves of allowable ESR range as a function of load current for various output capacitor values. Output capacitor of larger capacitance can reduce noise and improve load transient response,stability, and PSRR. The output capacitor should be located not more than 0.5 inch from the VOUT pin of the RT9055and returned to a clean analog ground.Figure 1. Stable C OUT ESR RangeRegion of Stable C OUT ESR vs. Load Current0.0010.010.111010050100150200250300Load Current (mA)R e g i o n o f S t a b l e C O U TE S R (Ω)R e g io n o f S t a b l e C O U T E S R (Ω)Thermal ConsiderationsFor continuous operation, do not exceed absolute maximum junction temperature. The maximum power dissipation depends on the thermal resistance of the IC package, PCB layout, rate of surrounding airflow, and difference between junction and ambient temperature. The maximum power dissipation can be calculated by the following formula :P D(MAX) = (T J(MAX) − T A ) / θJAwhere T J(MAX) is the maximum junction temperature, T A is the ambient temperature, and θJA is the junction to ambient thermal resistance.For recommended operating condition specifications, the maximum junction temperature is 125°C. For WL-CSP-6B 0.8x1.2 package, the thermal resistance, θJA , is 148°C/W on a standard JEDEC 51-7 four-layer thermal test board.The maximum power dissipation at T A = 25°C can be calculated by the following formula :P D(MAX) = (125°C − 25°C) / (148°C/W) = 0.670W for WL-CSP-6B 0.8x1.2 packageThe maximum power dissipation depends on the operating ambient temperature for fixed T J (MAX) and thermal resistance, θJA . The derating curves in Figure 2 allow the designer to see the effect of rising ambient temperature on the maximum power dissipation.Figure 2. Derating Curve of Maximum Power Dissipation0.00.20.40.60.8255075100125Ambient Temperature (°C)Ma x i m u m P o w e r D i s s i p a t i o n (W )RT9055Richtek Technology Corporation14F, No. 8, Tai Yuen 1st Street, Chupei City Hsinchu, Taiwan, R.O.C.Tel: (8863)5526789Richtek products are sold by description only. Richtek reserves the right to change the circuitry and/or specifications without notice at any time. Customers should obtain the latest relevant information and data sheets before placing orders and should verify that such information is current and complete. Richtek cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Richtek product. Information furnished by Richtek is believed to be accurate and reliable. However, no responsibility is assumed by Richtek or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Richtek or its subsidiaries.Outline Dimension6B WL-CSP 0.8x1.2 Package (BSC)。
高原压力气包 技术说明书
技术说明书技术说明书高原压力气包高原压力气包概况概况：：澳大利亚高原公司和意大利马佳尔公司联合推出“高原美克”品牌压力气包清灰系统产品。
高原美克气包可按照客户要求安装配备高原或者马佳尔电磁脉冲阀。
压力气包的生产完全依照意大利马佳尔工厂的严格质量要求执行。
符合欧共体质量标准 ASME Sec IX* /PED 97/23/EC**ASME Sec IX* /PED 97/23/EC**ASME Sec IX* /PED 97/23/EC**，并且完全满足执行CE CE 标准的各项要求（CE CE 认证）。
每个高原美克的气包均带有测试证书保证能够承受最高8巴的工作压力。
高原美克圆形气包具有多种外径尺寸供客户选择：5”、6”、8”、10”、12” 和14”。
气包的长度以及阀门间的距离是根据项目的要求以及CE 压力容器设计规则制定的。
高原公司建议每个气包长度不应该超过6米以便于安装和运输。
如果需要特大容量的气包回路，高原公司可提供把多个气包连接在一起的解决方案。
高原美克方形气包可根据客户设计要求，按照中国机械行业标准JB10191JB10191--2000设计制造。
为使压力清灰系统运作正常，客户必须使用经过过滤和干燥后的压缩空气。
适用范围适用范围：：适用于除尘器,特别是逆吹风脉冲清灰过滤系统包括各种滤袋、滤筒、扁袋、陶瓷管和金属纤维滤袋。
注意注意: : : 气包的长度和直径大气包的长度和直径大气包的长度和直径大小必须可以提供足够小必须可以提供足够的喷吹气量以满足喷吹管上各个喷嘴所需的压缩气流量气流量。
可以采用高原公司免费提供的电脑清灰设计服务计服务（（GOCO 技术技术））获得最优化的喷吹孔尺寸和气包容量气包容量。
请与高原公司上海代表处联系请与高原公司上海代表处联系。
方案类型方案类型高原公司根据以下圆形气包尺寸配置GOYEN 或者MECAIR 品牌脉冲阀：气包外径 = 5” (141 mm) 喷吹管标称内径 = 20 mmGOYEN 阀门型号 MECAIR 阀门型号 RCAC20T4 VEM/VNP206 RCAC20DD4 VEM/VNP306 RCAC20FS4VEM/VNP506 气包外径 = 6” (168 mm) 喷吹管标称内径 = 25 mmGOYEN 阀门型号 MECAIR 阀门型号 RCAC25T4 VEM/VNP208 RCAC25DD4VEM/VNP308 VEM/VNP508 RCAC25FS4VEM/VNP608 气包外径 = 8” (219 mm) 喷吹管标称内径 = 40 mmGOYEN 阀门型号 MECAIR 阀门型号CA /RCA35T VNP212 CA /RCA45T VEM/VNP214 CA /RCA45DD VEM/VNP314 CA /RCA40MM VEM/VNP514 CA /RCA45FSVEM/VNP614 气包外径 = 10” (273 mm) 喷吹管标称内径 = 50 mmGOYEN 阀门型号 MECAIR 阀门型号CA /RCA50TVNP216 VEM/VNP516VEM/VNP616 VEM/VNP714 气包外径 = 12” (324 mm) 喷吹管标称内径 = 62 mmGOYEN 阀门型号 MECAIR 阀门型号CA /RCA62TVNP220VEM/VNP520VEM/VNP716 气包外径 = 14” (356 mm)喷吹管标称内径 = 76 mmGOYEN 阀门型号 MECAIR 阀门型号CA /RCA76T VNP224CA /RCA76MMVEM/VNP720喷吹管标称内径 = 90 mmCA /RCA102MM如以上阀门型号需要配备不同外径的气包尺寸如以上阀门型号需要配备不同外径的气包尺寸，，必须按照非标设计必须按照非标设计，，请与高原公司上海代表处联系上海代表处联系。
莫萨 EDS-205 系列非網管型乙太網路交換器说明书
/tw 1EDS-205系列5埠入門級非網管型乙太網路交換器特色與優點•10/100BaseT(X)(RJ45連接器)•支援IEEE802.3/802.3u/802.3x •廣播風暴保護•支援鋁軌式安裝•-10至60°C 工作溫度範圍認證簡介EDS-205系列支援IEEE 802.3/802.3u/802.3x ，具有10/100M 、全/半雙工、MDI/MDIX 自動感應RJ45連接埠。
EDS-205系列可在-10至60°C 的額定溫度範圍內運作，並且非常堅固耐用，適合任何嚴苛的工業環境。
此系列交換器可以輕鬆安裝在DIN 軌道和配接箱中。
由於EDS-205系列可安裝在DIN 軌道上、寬溫設計，並且具備含LED 指示燈的IP30外殼，這款即插即用的EDS-205交換器不僅簡單易用又具可靠性。
規格Ethernet InterfaceStandards IEEE 802.3for 10BaseTIEEE 802.3u for 100BaseT(X)IEEE 802.3x for flow control10/100BaseT(X)Ports (RJ45connector)Full/Half duplex modeAuto MDI/MDI-X connectionAuto negotiation speed Switch PropertiesProcessing TypeStore and Forward MAC Table Size1K Packet Buffer Size 512kbitsPower ParametersInput Voltage24VDC Input Current0.11A @24VDC Operating Voltage12to 48VDC Connection1removable 3-contact terminal block(s)Overload Current Protection1.1A @24VDC Reverse Polarity Protection SupportedPhysical CharacteristicsHousing PlasticIP Rating IP30Dimensions24.9x100x86.5mm(0.98x3.94x3.41in) Weight135g(0.30lb)Installation DIN-rail mountingEnvironmental LimitsOperating Temperature-10to60°C(14to140°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsSafety EN60950-1,UL508EMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:4kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:3V/mIEC61000-4-4EFT:Power:1kV;Signal:0.5kVIEC61000-4-5Surge:Power:1kV;Signal:1kVIEC61000-4-6CS:3VIEC61000-4-8PFMFShock IEC60068-2-27Vibration IEC60068-2-6Freefall IEC60068-2-31MTBFTime3,915,945hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period5yearsDetails See /tw/warrantyPackage ContentsDevice1x EDS-205Series switchDocumentation1x quick installation guide1x warranty card2尺寸訂購資訊Model Name 10/100BaseT(X)PortsRJ45ConnectorHousing Material Operating Voltage Operating Temp.EDS-2055Plastic12-48VDC-10to60°C配件（選購）Power SuppliesDR-120-24120W/2.5A DIN-rail24VDC power supply with universal88to132VAC or176to264VAC input byswitch,or248to370VDC input,-10to60°C operating temperatureDR-452445W/2A DIN-rail24VDC power supply with universal85to264VAC or120to370VDC input,-10to50°Coperating temperatureDR-75-2475W/3.2A DIN-rail24VDC power supply with universal85to264VAC or120to370VDC input,-10to60°C operating temperatureMDR-40-24DIN-rail24VDC power supply with40W/1.7A,85to264VAC,or120to370VDC input,-20to70°Coperating temperatureMDR-60-24DIN-rail24VDC power supply with60W/2.5A,85to264VAC,or120to370VDC input,-20to70°Coperating temperatureRack-Mounting KitsRK-4U19-inch rack-mounting kit©Moxa Inc.版權所有.2020年2月13日更新。
沃伦森电气系列产品型号
沃伦森电气(WARENSEN)多年来一直专注于输配电系统无功补偿、滤波及电力电子设备的研发、生产和工程实施。
公司引入德国先进制造工艺和技术,坚持“积木式设计理念模块化成套产品”的产品战略,全心全意打造行业最具价值品牌!公司所生产的:WUAPF、WRS-APF、WMPF-12系列有源滤波装置主要应用于谐波污染严重的工况下;WRS-IC(R)、WRS-CRT(S)、WMT(S)C、WMXC-12、WMC-12、WMC-35系列无功补偿装置主要应用于电网等无功负荷波动较小的工况下;WRS-SVG、WDSVG、WIDSVG、WMSVC、WTSVC主要应用于无功负荷波动剧烈、电压闪变严重的工况下。
以上系列产品均可针对单独工程具体设计并提供项目策划书。
公司坚持“产品如人品质量是生命”的质量理念,保证产品卓越品质,并把“完美的产品是艺术品”作为产品制造工艺的唯一准则。
沃伦森电气(WARENSEN)在引入德国技术发展的同时,更注重人才与自主技术的储备,坚持与科研院所合作,定向培训、学术交流,联合建立研发基地,不断进行技术创新,提高产品先进性,保持行业领先水平。
一流的团队,一流的质量,一流的服务是我们的动力和源泉。
沃伦森电气(WARENSEN)不仅要做一个制造高品质产品的生产商,还要做一个用户满意,高效反应机制,不断创新的服务提供商。
互惠互利,与用户共赢,是我们永远的追求和目标。
电容器+电抗器WRS-CR7-10/400V WRS-MKP10/400-3 WRS-CK-10/400-3WRS-CR7-15/400V WRS-MKP15/400-3 WRS-CK-15/400-3WRS-CR7-20/400V WRS-MKP20/400-3 WRS-CK-20/400-3WRS-CR7-25/400V WRS-MKP25/400-3 WRS-CK-25/400-3WRS-CR7-30/400V WRS-MKP30/400-3 WRS-CK-30/400-3 WRS-CR7-40/400V WRS-MKP40/400-3 WRS-CK-40/400-3 WRS-CR14-10/400V WRS-MKP10/400-3 WRS-CK-10/400-3 WRS-CR14-15/400V WRS-MKP15/400-3 WRS-CK-15/400-3 WRS-CR14-20/400V WRS-MKP20/400-3 WRS-CK-20/400-3 WRS-CR14-25/400V WRS-MKP25/400-3 WRS-CK-25/400-3 WRS-CR14-30/400V WRS-MKP30/400-3 WRS-CK-30/400-3 WRS-CR14-40/400V WRS-MKP40/400-3 WRS-CK-40/400-3 电容电抗模块产品(晶闸管)WRS-CRT7-30/2-400VWRS-CRT7-30/2-400VWRS-CRT7-30/1-400VWRS-CRT7-30/2-400VWRS-CRT7-60/2-400VWRS-CRT7-60/2-400VWRS-CRT7-60/1-400VWRS-CRT7-60/2-400VWRS-CRT7-60/1-400V WRS-CRT7-60/2-400V WRS-CRT7-90/1-400V WRS-CRT7-60/1-400V WRS-CRT7-90/1-400V WRS-CRT7-60/2-400V WRS-CRT7-60/1-400V WRS-CRT7-90/1-400V WRS-CRT7-60/1-400V WRS-CRT7-90/1-400V WRS-CRT7-60/1-400V WRS-CRT7-90/1-400V WRS-CRT7-90/1-400V WRS-CRT14-30/2-400V WRS-CRT14-30/2-400V WRS-CRT14-30/1-400V WRS-CRT14-30/2-400VWRS-CRT14-60/2-400V WRS-CRT14-60/2-400V WRS-CRT14-60/1-400V WRS-CRT14-60/2-400V WRS-CRT14-60/1-400V WRS-CRT14-60/2-400V WRS-CRT14-90/1-400V WRS-CRT14-60/2-400V WRS-CRT14-60/1-400V WRS-CRT14-90/1-400V WRS-CRT14-60/2-400V WRS-CRT14-60/1-400V WRS-CRT14-90/1-400V WRS-CRT14-60/1-400V WRS-CRT14-90/1-400V WRS-CRT14-60/1-400V WRS-CRT14-90/1-400VWRS-CRT14-90/1-400V电容电抗模块产品(接触器) WRS-CRS7-30/2-400VWRS-CRS7-30/2-400VWRS-CRS7-30/1-400VWRS-CRS7-30/2-400VWRS-CRS7-60/2-400VWRS-CRS7-60/2-400VWRS-CRS7-60/1-400VWRS-CRS7-60/2-400VWRS-CRS7-60/1-400VWRS-CRS7-60/2-400VWRS-CRS7-60/2-400V WRS-CRS7-60/1-400V WRS-CRS7-90/1-400V WRS-CRS7-60/2-400V WRS-CRS7-60/1-400V WRS-CRS7-90/1-400V WRS-CRS7-60/1-400V WRS-CRS7-90/1-400V WRS-CRS7-60/1-400V WRS-CRS7-90/1-400V WRS-CRS7-90/1-400V WRS-CRS7-400V WRS-CRS14-30/2-400V WRS-CRS14-30/2-400V WRS-CRS14-30/1-400V WRS-CRS14-30/2-400V WRS-CRS14-60/2-400V WRS-CRS14-60/2-400V WRS-CRS14-60/1-400V WRS-CRS14-60/2-400V WRS-CRS14-60/1-400V WRS-CRS14-60/2-400V WRS-CRS14-90/1-400V WRS-CRS14-60/2-400V WRS-CRS14-60/1-400V WRS-CRS14-90/1-400V WRS-CRS14-60/2-400V WRS-CRS14-60/1-400V WRS-CRS14-90/1-400V WRS-CRS14-60/1-400V WRS-CRS14-90/1-400V WRS-CRS14-60/1-400V WRS-CRS14-90/1-400V WRS-CRS14-90/1-400V 智能电容器WRS-IC-450/10WRS-IC-450/15WRS-IC-450/20WRS-IC-450/25WRS-IC-450/30WRS-IC-450/40WRS-IC-450/50WRS-IC-450/60WRS-IC-450/70智能电容器(电抗器) WRS-ICR7-480/10 WRS-ICR7-480/15WRS-ICR7-480/20WRS-ICR7-480/24WRS-ICR7-480/30WRS-ICR7-480/35WRS-ICR7-480/40WRS-ICR7-480/45WRS-APF模块产品WRS-APF25/400VWRS-APF35/400VWRS-APF50/400VWRS-APF60/400VWRS-APF75/400VWRS-APF100/400VWRS-SVG模块产品WRS-SVG50/400VWRS-SVG100/400V静止无功发生器WRS-SVG WDSVG-12/1000-N WDSVG-12/2000-N磁控式动态补偿滤波装置WMSVC-12/600-600-N WMSVC-12/1000-1000-N WMSVC-12/1200-1200-N WMSVC-12/600-600-W WMSVC-12/1000-1000-W WMSVC-12/1200-1200-W 高压无功补偿装置WMC-12/1000-3NWMC-12/1200-4NWMC-12/1600-4NWMC-12/2000-5NWMC-12/1000-3WWMC-12/1200-4WWMC-12/1600-4WWMC-12/2000-5W高压线路装置WMXC-6/50+100JWMXC-6/100+100J WMXC-6/200+100J WMXC-6/100+200JWMXC-6/100+100 WMXC-12/50+100J WMXC-12/100+100J WMXC-12/200+100J WMXC-12/100+200J WMXC-12/100+100低压有源滤波装置WUAPF-480/50-2N WUAPF-480/75-2N WUAPF-480/100-3N WUAPF-480/125-3N WUAPF-480/150-3N WUAPF-480/200-4N低压无功补偿装置WMTC-400/90-4N WMTC-400/120-3N WMTC-400/180-4N WMTC-400/240-4N WMTC-400/300-5N WMTC-400/360-6N WMTC-400/480-6N低压无源滤波装置WTSF400-100/3-N WTSF400-200/4-N WTSF400-300/5-N低压控制器WRS-DK-12TWRS-DK-21TWRS-DK-12SWRS-DK-21S高压控制器WRS-HK-700智能电容器控制器WRS-IK-200电容器综合保护单元WRS-HB-1000电能质量在线监测装置WRS-600S动态补偿调节开关WRS-TD1永磁式电容投切真空开关WRS-ZNT12/630-Y。
FS FORTH-SYSTEME GmbH Mod520C_2 产品说明书
Mod520C_2P.O. Box 11 03l D-79200 Breisach, Germany Kueferstrasse 8l D-79206 Breisach, Germany (+49 (7667) 908-0 l Fax +49 (7667) 908-200 l e-mail:****************Mod520C_2© Copyright 2004:FS FORTH-SYSTEME GmbHPostfach 1103, D-79200 Breisach a. Rh., GermanyRelease of Document:May 27, 2004Filename:Mod520C_2.docAuthor:Hans-Peter SchneiderAll rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of FS FORTH-SYSTEME GmbH.2Mod520C_2 Table of Contents1.Introduction (4)2.Features (5)3.Functional Description (6)3.1.1.CPU AMD ÉlanSC520 (6)3.1.2.SDRAM stage (6)3.1.3.ROM stage (6)3.1.4.SRAM stage (6)3.1.5.32 I/O Ports (7)3.1.6.256 Byte EEPROM for BIOS and Applications on PIO30,31 (7)3.1.7.On-board Power Supply (7)3.1.8.Voltage Supervision, RESET Generation (7)3.1.9.Serial Ports (7)3.1.10.Fast Ethernet Controller Stage (8)3.1.11.Dual CAN Controller Stage (8)3.1.12.GP Bus used for ISA Bus (9)4.Connectors Of MOD520C (10)4.1.System Connector X2 (10)4.2.System Connector X4 (12)5.Application Notes (14)5.1.Power Supply (14)5.2.Important Signals (14)5.2.13.PCICLKRTN PCICLK PCICLKETHER (14)5.2.14.ISA-Bus Signals (14)5.2.15.CAN-Interrupt IRQ11 (15)6.Members of the MOD520C family (16)3Mod520C_21. IntroductionThe module MOD520C with its integrated and optional peripherals, based on the 32 Bit AMD ÉlanSC520 microcontroller, is designed for medium to high performance applications in telecommunication, data communication and information appliances on the general embedded market. It can easily be designed in customized boards.The AMD ÉlanSC520 microcontroller combines a low voltage 586 CPU running on 133 MHz, including FPU (Floating Point Unit) with a set of integrated peripherals: 32 Bit PCI controller, SDRAM controller for up to 256 MByte, GP (General Purpose) bus with programmable timing and ROM/Flash controller. Enhanced PC compatible peripherals like DMA controller, two UARTs and battery buffered RTC and CMOS, watchdog and software timers make this device a very fast system for both real time and PC/AT compatible applications. Insyde Software’s Mobile BIOS is available which offers serial and parallel remote features (video, keyboard, floppy). Furthermore FS FORTH-SYSTEME has adapted Datalight Sockets (TCP/IP Stack), ROM-DOS and the Flash File System FlashFX to this environment.The MOD520C offers the software engineer the possibility to reduce the time-to-market phase even more. FS FORTH-SYSTEME added several features on-board as SDRAM (up to 64 MByte), PCI Fast Ethernet controller to facilitate networking and remote control. A Strata-FLASH for booting and data is included on board. Two CAN Ports are additionally available for communication. 512 Kbyte SRAM is available for battery buffered data. The enhanced JTAG port for low-cost debugging is supported. This allows instruction tracing during execution. FS FORTH-SYSTEME has adapted Windows CE 3.0 to this platform and offers drivers and support. With Ethernet debugging the software designer has powerful means for fast debugging his applications.Due to the 16 MByte FLASH it is possible to build larger, complete systems on this module like Linux, QNX or VxWorks.4Mod520C_252. Features• 16 MByte STRATA-FLASH or 2 MByte AMD FLASH • 64 MByte or 16 MByte SDRAM • 512 KByte battery buffered SRAM• PCI Ethernet controller with EEPROM. Rx and Tx signals are providedon the System Connectors • Two CAN-Buses.• Enhanced JTAG port available on System Connector.• GP-Bus signals available on System Connector • PCI-Bus signals available on System Connector• BIOS for ÉlanSC520 by Insyde Software Inc. Including serial or parallelremote features (Video, Keyboard, Floppy).Mod520C_23. Functional Description3.1.1. CPU AMD ÉlanSC520The CPU AMD ÉlanSC520 is powered with 2.5V (core and analog path) and 3.3V (all other voltages) except VRTC, which is powered with about 3V either from battery or from on-board 3.3V. This voltage is limited to 3.3V, the other 3.3V power planes have a limit of 3.6V.The CPU is clocked with a 32.768 kHz quartz. An internal PLL derives from this frequency the RTC clock and DRAM refresh clock and the clocks for PC/AT compatible PIT (1.1882 MHz) and UARTs (18.432 MHz). All other stages (CPU, PCI, GP bus, GP DMA, ROM, SSI, timers) are fed from the second clock generator driven by a 33.33 MHz clock oscillator. SDRAM is clocked with 66.66 MHz.3.1.2. SDRAM stageThe SDRAM (up to 128 MByte on-board) has its own DRAM bus containing memory addresses MA0..12, memory data MD0..31 and control signals for up to four banks. Due to small load no buffering of clocks and signals is necessary.3.1.3. ROM stageROM or FLASH are driven by the general purpose address bus GPA0..25. It has three programmable chip selects with each up to 64 MByte range. The ROM Data bus is either the 32 bit general purpose bus GPD0..31 or the memory data bus MD0..31. Configuration pins decide, which bus at boot time is used. The bus size is selectable with 8, 16 or 32 bit. The MOD520C has a FLASH IC for up to 16 MByte 16 bit ROM or FLASH selected by BOOTCS# connected to MD0..15. 3.1.4. SRAM stageThe SRAM (512 KByte on-board) is buffered by VBAT. The Memory Location is defined in the System BIOS. ROMCS1# is used to access the SRAM.6Mod520C_23.1.5. 32 I/O PortsThe ÉlanSC520 CPU has 32 I/O ports. They have alternate functions. Most of them are control signals for GP bus (PIO0..26) used as ISA-bus. PIO27 (GPCS0#) is used as a programmable external chip select and PIO28,29 are not connected. PIO30,31 are used to drive a serial parameter EEPROM on-board. 3.1.6. 256 Byte EEPROM for BIOS and Applications on PIO30,31An on-board serial EEPROM with 256 byte and I2C bus is controlled by PIO30 (I2CDAT) and PIO31 (I2CCLK). 128 byte are used for non-volatile BIOS defaults, the remaining range may contain application specific data and parameters. The BIOS contains calls to read and write to this memory (see BIOS documentation).3.1.7. On-board Power SupplyThe 2.5V on-board voltage is generated from +5V.An external battery may be connected to the signal VBATIN. Battery status is controlled by BBATSEN, which sets a power fail bit in a status register for RTC, if BBATSEN is low at power-up.3.1.8. Voltage Supervision, RESET GenerationThree voltages are used on board: +2.5V, +3.3V and +5V. U2 controls +5V and U10 controls +3.3V. LBOUT or PWRGOOD will become low, if these voltages are out of tolerance. An external SRESET# is wired or-ed to U10. It can also be activated from extended JTAG signal SRESET# via X1. The wired OR of 1RESET# and 2RESET# control U10. Its output PWRGOOD is low (not active), if either the signals described above from U10 are low or +5V is out of tolerance. Typical length of PWRGOOD low is longer than 1 sec (minimum 790 msec).3.1.9. Serial PortsThe AMD ÉlanSC520 CPU has two internal asynchronous ports and one synchronous serial port. Both of this ports are available at the System Connectors.7Mod520C_23.1.10. Fast Ethernet Controller StageConnected to the PCI bus device 0 (REQ/GNT0#) of the Élan SC520 CPU, a Fast Ethernet Controller U7 supports 10/100Mbps transfer depending on driver software. X3 is a JST B5B-PH-SM3 5 pin connector. Parameters as physical address and power down modes are stored in a 64X16 bit Serial EEPROM controlled by U7. 2 status LEDs LE1, LE2 show the state of the Ethernet connection. For a more detailed hardware and software description see Intel 82559ER manual.3.1.11. Dual CAN Controller StageThe CAN Controller is selected via ROMCS1# and the Memory location is selectable in the BIOS Setup Screen. The CAN Interrupt provided by 82C900 is inverted by the onboard Lattice CPLD. Since the Interrupt asserted by the 82C900 is only a low active pulse of 0.2µs the CPLD holds the interrupt active until the software accesses the Memory at the location CAN-Base+1xxh. The BIOS routes this interrupt to IRQ11.8Mod520C_2 3.1.12. GP Bus used for ISA BusThe AMD ÉlanSC520 CPU contains an 8/16bit General Purpose Bus (GP bus) with 26 address lines (GPA0..25), 16 data lines (GPD0..15) and different control lines using PIO ports in their alternate GP bus function. Its timing is programmable for speeds up to 33MHz. This bus is to emulate a 16 bit ISA bus (PC/104) running with 8 MHz. ISA bus signal are connected without buffers directly to the lines of the CPU due to the 5V tolerance of the 3.3V signals.8 bit signals SMEMRD# and SMEMWR# (active only at addresses beyond 1 MByte) are not supported (GPMEM_RD# and GPMEM_WR# used).The AMD ÉlanSC520 CPU has only 4 DMA channels on GP bus. DMA channel 2 is used for Super-I/O (U2) on EVAMOD520. All four channels are connected to edge connector X2.Not supported ISA bus signals 0WS#, IOCHK#, IRQ15, REFRESH#, 8MHz and 14.318 MHz clocks, MASTER#.9Mod520C_24. Connectors Of MOD520C4.1. System Connector X2Pin Function I/O Pin Function I/O1+3.3V power2GND power 3+3.3V power4GND power 5GPD0I/O6TDP O7GPD1I/O8TDN O9GPD2I/O10not connected11GPD3I/O12RDP I13GPD4I/O14RDN I15GPD5I/O16not connected17GPD6I/O18DRQ0I19GPD7I/O20DRQ2I21GPD8I/O22DRQ5I23GPD9I/O24DRQ7I25GPD10I/O26DACK0#O27GPD11I/O28DACK2#O29GPD12I/O30DACK5#O31GPD13I/O32DACK7#O33GPD14I/O34GND power 35GPD15I/O36GPRESET O37GND power38GPIORD#O39GPA0O40GPIOWR#O41GPA1O42GPALE O43GPA2O44GPBHE#O45GPA3O46GPRDY I47GPA4O48GPAEN O49GPA5O50GPTC O51GPA6O52GPDBUFOE#O53GPA7O54GPIO_CS16#O55GPA8O56GPMEM_CS16#O57GPA9O58GPCS0#O59GPA10O60GPMEM_RD#O61GPA11O62GPMEM_WR#O63GPA12O64GND power 10Pin Function I/O Pin Function I/O65GPA13O66EXTRES#I67GPA14O68PWRGOOD O69BUFA15O70CLKTEST71BUFA16O72PRG_RESET73BUFA17O74GND power75BUFA18O76GPCS1#O77BUFA19O78GPCS2#O79BUFA20O80GPCS3#O81BUFA21O82GPCS4#O83BUFA22O84GPCS5#O85BUFA23O86GPCS6#O87BUFA24O88GPCS7#O89BUFA25O90VBATIN power91GND power92GND power93IRQ1I94RSTLD0I95IRQ3I96RSTLD1I97IRQ4I98RSTLD2I99IRQ5I100RSTLD3I101IRQ6I102RSTLD4I103IRQ7I104RSTLD5I105IRQ9I106RSTLD6I107IRQ10I108RSTLD7I109CANINT I110DBGDIS I111IRQ12I112INSTRC I113IRQ14I114DBGENTR I115SPEAKER O116not connected117+5V power118GND power119+5V power120GND power114.2. System Connector X4Pin Function I/O Pin Function I/O1PCICLKRTN I2GND power 3PCICLK O4PCICLKETHER I5AD0I/O6CBE0#I/O7AD1I/O8CBE1#I/O9AD2I/O10CBE2#I/O11AD3I/O12CBE3#I/O13AD4I/O14not connected15AD5I/O16not connected17AD6I/O18not connected19AD7I/O20not connected21AD8I/O22GND power 23AD9I/O24RXD1I25AD10I/O26TXD1O27AD11I/O28CTS1#I29AD12I/O30DCD1#I31AD13I/O32DSR1#I33AD14I/O34RIN1#I35AD15I/O36DTR1#O37AD16I/O38RTS1#O39AD17I/O40RXD2I41AD18I/O42TXD2O43AD19I/O44CTS2#I45AD20I/O46DCD2#I47AD21I/O48DSR2#I49AD22I/O50RIN2#I51AD23I/O52DTR2#O53AD24I/O54RTS2#O55AD25I/O56CANH1/TXD157AD26I/O58CANL1/RXD159AD27I/O60CANH2/TXD261AD28I/O62CANL2/RXD263AD29I/O64GND power 12Pin Function I/O Pin Function I/O65AD30I/O66SRESET#I67AD31I/O68GPRESET#O69GND power70TCK O71INTA#I72TMS73INTB#I74TDI I75INTC#I76TDO O77INTD#I78TRST#I79REQ0#I80CMDACK81REQ1#I82BR/TC83REQ2#I84GND Power85REQ3#I86STOP/TX87REQ4#I88TRIG/TRACE89GNT0#O90not connected91GNT1#O92ACTLED#O93GNT2#O94LILED#O95GNT3#O96SPEEDLED#O97GNT4#O98not connected99GND power100GND power101PAR I/O102SSI_CLK O103PERR#I/O104SSI_DO O105SERR#I106SSI_DI I107FRAME#I/O108not connected109TRDY#I/O110ISP_TDI I111IRDY#I/O112ISP_TDO O113STOP#I/O114ISP_TMS115DEVSEL#I/O116ISP_TCK I117RST#O118BSCAN#119GND power120GND power135. Application Notes5.1. Power SupplyThe MOD520C needs +3.3V and 5V power supply.3.3V worst case supply current is 1130 mA5V worst case supply current is 550 mABe sure to design your power supply for this current including large load transients.5.2. Important Signals5.2.13. PCICLKRTN PCICLK PCICLKETHERPCICLK is the clock source for the PCI-Bus. PCICLKETHER is the clock input for the Ethernet Controller. PCICLKRTN is the clock input of the AMD Élan Sc520. This pin is used to synchronize the CPU with the external PCI-Bus. Therefore it is important that all clock traces have the same length to provide each PCI-Target with the clock at the same time. Trace length of each of this clocks is 68mm on the module. If you do not plan to connect an additional PCI-Target on your board you just add a serial resistor 33R between PCICLK and PCICLKRTN and one between PCICLK and PCICLKETHER.5.2.14. ISA-Bus SignalsIf you use the ISA-Bus Signals you have to add some resistors to the following Signals:GPD0 – GPD15 4k7 pull upGPRDY1k pull downIRQ´s10k pull upDRQ´s10k pull down145.2.15. CAN-Interrupt IRQ11IRQ11 is used for the CAN-Controller 82C900 and is not sharable. Since the interrupt provided by 82C900 is a low active pulse with a length of 0.2µs the CPLD inverts this signal and holds it until the software acknowledges the interrupt. To acknowledge this interrupt the software has to access a memory location with the offset 1xxh to the CAN-Base. This memory access is just an access of the system memory, not an access of the CAN-Controller.156. Members of the MOD520C familyNumbe r Variant Flash SDRAM SRAM CAN CAN-DriverTemp.320MOD520C_0_V018M*16, Strata(=16 Mbyte)1*TM014452*4M*16(=16 Mbyte)2*TM01519512k*8Yes Yes0..70°321MOD520C_0_V021M*16, AMD(=2 Mbyte)1*TM015202*4M*16(=16 Mbyte)2*TM01519512k*8Yes Yes0..70°322MOD520C_0_V038M*16, Strata(=16 Mbyte)1*TM014452*16M*16(=64 Mbyte)2*TM01249512k*8Yes Yes0..70°334MOD520C_1_V01MOD520C_2_V018M*16, Strata(=16 Mbyte)1*TM014452*4M*16(=16 Mbyte)2*TM01519512k*8TM0Yes no0..70°335MOD520C_1_V02MOD520C_2_V021M*16, AMD(=2 Mbyte)1*TM015202*4M*16(=16 Mbyte)2*TM01519512k*8TM0Yes no0..70°336MOD520C_1_V03MOD520C_2_V038M*16, Strata(=16 Mbyte)1*TM014452*16M*16(=64 Mbyte)2*TM01249512k*8TM0Yes no0..70°184MOD520C_1_V048M*16, Strata(=16 Mbyte)1*TM014452*4M*16(=16 Mbyte)2*TM01519No No No0..70°16。
阿尔法电线（Alpha Wire）ECOWIRE TM 20 AWG E163869-DB RU A
Customer Specification PART NO. 6714ConstructionApplicable Specifications Environmental Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: Diameters (In)1) Component 1 1 X 1 HOOKUPa) Conductor 20 (10/30) AWG TC 0.036b) Insulation 0.0095" Wall, Nom. ModifiedPolyphenylene Ether0.055+/- 0.002(1) Print ALPHA WIRE ECOWIRE TM 20 AWG E163869-DB RU AWM 11028 105C 600V VW-1 --- CRU AWM I A/B 105C 600V FT1 CE ROHS(2) Color(s) WHITE, BLACK, RED, GREEN, YELLOW, BLUE, BROWN ORANGE, SLATE, VIOLET, GREEN/YELLOW, DARK BLUE1) UL AWM/STYLE 11028 105°C / 600 V RMSVW-12) CSA International C(RU) AWM I A/B FT1 105°C / 600 V RMS3) Other Halogen-FreeIEC 60332-2 Flame Behavior4) CE:EU Low Voltage Directive 2006/95/EC1) EU Directive 2011/65/EU(RoHS2):All materials used in the manufacture of this part are in compliance withEuropean Directive 2011/65/EU regarding the restriction of use of certainhazardous substances in electrical and electronic equipment. Consult AlphaWire's web site for RoHS C of C.PropertiesOther2) REACH Regulation (EC 1907/2006):This product does not contain Substances of Very High Concern (SVHC)listed on the European Union's REACH candidate list in excess of 0.1%mass of the item. For up-to-date information, please see Alpha's REACH SVHC Declaration.Physical & Mechanical Properties 1) Temperature Range -40 to 105°C 2) Bend Radius 10X Cable Diameter 3) Pull Tension 7.9 Lbs, MaximumElectrical Properties (For Engineering purposes only) 1) Voltage Rating 600 V RMS 2) Inductance 0.04 µH/ft, Nominal3) Conductor DCR 10.6 Ω/1000ft @20°C, NominalPackaging Flange x Traverse x Barrel (inches)a) 25000 DR 23 x 20 x 0 Max. 2 separate pieces; Min length/piece 5000 FT.b) 5000 FT 12 x 4.5 x 3.5 Continuous length c) 1000 FT 9 x 4.5 x 3.5 Continuous length d) 100 FT3.75 x 2 x 1.75 Continuous length[Spool dimensions may vary slightly]Notes:a) Certain colors and put-up combinations may only be available by special order, minimums may apply.Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742)Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication,information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall govern the status of this document. <br /><br />©2019 ALPHA WIRE - all rights reserved.EU/China ROHS CERTIFICATE OF COMPLIANCETo Whom It May Concern:Alpha Wire Part Number: 67146714, RoHS-Compliant Commencing With 7/1/2009 ProductionNote: all colors and put-upsThis document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014.Substance Maximum Control ValueLead0.1% by weight (1000 ppm)Mercury0.1% by weight (1000 ppm)Cadmium0.01% by weight (100 ppm)Hexavalent Chromium0.1% by weight (1000 ppm )Polybrominated Biphenyls (PBB)0.1% by weight (1000 ppm)Polybrominated Diphenyl Ethers (PBDE) ,Including Deca-BDE0.1% by weight (1000 ppm)Bis(2-ethylhexyl) phthalate (DEHP)0.1% by weight (1000 ppm)Butyl benzyl phthalate (BBP)0.1% by weight (1000 ppm)Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)Diisobutyl phthalate (DIBP)0.1% by weight (1000 ppm)The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.Authorized Signatory for the Alpha Wire:Dave Watson, Director of Engineering & QA4/11/2022Alpha Wire711 Lidgerwood Ave.Elizabeth, NJ 07207Tel: 1-908-925-8000。
20-COMM-H RS485 HVAC 适配器固件版本 2.009 发行说明书
Release Note 20-COMM-H RS485 HVAC Adapter Firmware Revision 2.009This release note describes major revision 2, minor revision 9 of firmware for 20-COMM-H RS485 HV AC adapters.IntroductionThe following information is included in this document: EnhancementsThis section describes enhancements provided in this revision of firmware.•Added support for PowerFlex 750-Series drives (PowerFlex 753 and PowerFlex 755) in all three modes of operation (Modbus RTU, FLN P1, and Metasys N2) with the following limitations: –Does not support Chinese, Japanese, and Korean languages.–Cannot access drive DPI port 7 and higher.•Added support for PowerFlex 700VC drives in all three modes of operation (Modbus RTU, FLN P1, and Metasys N2).•Added new Parameter 33 - [RTU Memory Map]. This parameter sets the register mapping that the adapter uses when the adapter operates in the ‘Modbus RTU’ mode. The settings for this parameter are:–‘0’ (Legacy), the default setting, which provides Modbus register mapping that conforms to the Modbus standard specification, which is typically used by PowerFlex 7-Class drives.–‘1’ (PF4-Class) which provides Modbus register mapping that matches the register mapping used by PowerFlex 4-Class drives. This mapping reduces the programming time required for PowerFlex 7-Class drives when they are used on a network consisting mainly of PowerFlex 4-Class. For details of this register mapping, see Appendix C in the PowerFlex 4 Drive User Manual, publication 22A-UM001.Important:The register mapping provided with setting ‘1’ does not pass configured Datalinks through the adapter. Therefore, they are ignored.Topic Page Enhancements 1Corrected Anomalies 2Determining Firmware Revision 2Updating the Firmware 4Restrictions 7Compatible Revisions 8Rockwell Automation Support 8Product Satisfaction Return 8220-COMM-H RS485 HVAC Adapter Firmware Revision 2.009Corrected Anomalies There are no anomalies corrected in this revision of firmware.Determining Firmware Revision This section describes procedures to determine the firmware revision of your 20-COMM-H RS485 HV AC adapter.Using the LCD HIMUsing DriveExplorer Lite/Full Softwareunch DriveExplorer software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExplorer treeview, select the 20-COMM-H Modbus RTUadapter (see Figure 1).4.Click the information icon to display the adapter Properties screen.5.The ‘Revision’ field shows the present revision of the adapter firmware(for example, 2.008).TIP: When selecting the 20-COMM-H adapter using DriveExplorer Lite or Full software, version 5.01 or later, the adapter firmware revision is also shown in the right pane of the DriveExplorer window.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0093Figure 1 DriveExplorer Window with Information Icon and Device Properties Using DriveExecutive Softwareunch DriveExecutive software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExecutive treeview, select the 20-COMM-H adapter (see Figure 2).4.Click the information iconto display the adapter Properties screen.5.The ‘Revision’ field shows the present revision of the adapter firmware(for example, 2.008).Figure 2 DriveExecutive Window with Information Icon and Device Properties420-COMM-H RS485 HVAC Adapter Firmware Revision 2.009Updating the Firmware This section describes procedures to update the adapter firmware. Flash kitsfor drives, communication adapters, and peripherals are provided on the Allen-Bradley Web Updates site at /support/abdrives/webupdate . Updating can be performed using a 1203-USB or 1203-SSS converter. For information about how to connect to your drive, see their respective User Manual. They can be viewed/downloaded on the Literature Library website at .Installing the Flash Kit1.Go to the Allen-Bradley Web Updates site at /support/abdrives/webupdate and install the flash kit for the20-COMM-H adapter, which also automatically installs theControlFLASH software on your computer.2.You are now ready to use DriveExplorer, DriveExecutive,ControlFLASH or HyperTerminal software to update the adapter. See the respective section below and follow the ing DriveExplorer Lite/Full Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit ), launchDriveExplorer software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExplorer treeview, select the 20-COMM-H adapter.4.Click the information icon(see Figure 1) to display the adapterProperties screen.5.On the 20-COMM-H Properties screen, click the Details tab.Important:This update may cause the adapter parameters to revert totheir default values. You may want to save yourconfiguration using DriveExplorer software or the HIMCopyCat feature before updating.6.Click Flash Update to start the update.7.Select ‘2.009.xx’ from the list of available updates.8.Click Next >.9.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.ATTENTION: Risk of permanent equipment damage exists. Once an update has been started, do not remove power from the drive until after the download has completed and the adapter MOD status indicator startsflashing green. If power is removed before this occurs, the adapter may be permanently damaged. An adapter that has been damaged in this way cannot be repaired.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0095Using DriveExecutive Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit), launchDriveExecutive software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.In the DriveExecutive treeview, select the 20-COMM-H adapter.4.Click the information icon(see Figure 2) to display the adapterProperties screen.5.On the 20-COMM-H Properties screen, click the Component Detailstab.Important:This update may cause the adapter parameters to revert to their default values. You may want to save yourconfiguration using DriveExecutive software or the HIMCopyCat feature before updating.6.Click Flash Update to start the update.7.Select the 20-COMM-H from the list of available devices.8.Click Next >.9.Select ‘2.009.xx’ from the list of available updates.10.Click Next >.11.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.Using ControlFLASH Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit on page4),choose Start > (All) Programs > Flash Programming Tools >ControlFLASH to launch the ControlFLASH software.2.On the ControlFLASH Welcome screen, click Next >.3.Choose the appropriate 20-COMM-H update from the list of availableupdates for the mode (RTU, N2 or FLN P1) in which the adapter is set.4.Click Next >.Important:This update may cause the adapter parameters to revert to their default values. You may want to save yourconfiguration using the HIM CopyCat feature, orDriveExplorer or DriveExecutive software before updating.5.Expand the treeview for the communication path you are using, andselect the drive icon that represents the drive with the 20-COMM-H adapter you are updating.6.Click OK.7.If the Multiple Assemblies Found window appears, select‘Port X - 20-COMM-H’ from the list and click OK. If this window does620-COMM-H RS485 HVAC Adapter Firmware Revision 2.0098.With the Firmware Revision window displayed, select ‘2.009.xx’ fromthe list of available updates.9.Click Next >.10.Follow the remaining screen prompts until the update procedurecompletes and displays the new firmware revision 2.009.Using HyperTerminal Software to Update Firmware1.With the Flash Kit installed (see Installing the Flash Kit on page 4),launch HyperTerminal software.ing a 1203-USB or 1203-SSS converter, go online with the drive thatis connected to the adapter.3.Set the adapter network protocol rotary switch to either the ‘N2’ or ‘P1’position before proceeding.Important:If the ‘N2’ or ‘P1’ setting is different from what the adapterswitch was previous set to, you must power cycle the drive.4.Press Enter until the main menu appears.5.In the main menu, press ‘3’ to flash upgrade.6.Press the number key that corresponds to the ‘20-COMM-H’ in the list.7.Press ‘Y’ (for Yes) to update the firmware.The terminal program will start displaying the letter ‘C’. This signals the Xmodem protocol that the download may proceed. You then have one minute to start the transfer.8.From the Transfer menu, choose Send File to display the Send Filescreen.a.Click Browse.b.Navigate to the flash file located in C:\Program Files\ControlFLASH\0001\0078\1F00.Main Menu - Enter Number for Selection1> Display Setup Parameters2> Display Event Queue3> Flash Upgrade ATTENTION: Risk of injury or equipment damage exists. When youperform an update, the drive will fault if it is receiving control I/O from the adapter. Verify that the drive has stopped safely or is receiving control I/O from an alternate source before beginning an update.20-COMM-H RS485 HVAC Adapter Firmware Revision 2.0097c.In the Select File to Send window list, select the‘20-COMM-H_2_009_03_AppV2_N2P1_NewHdr.bin’ file.d.Click Open.This file name now appears in the Filename box in the Send Filescreen.e.From the Protocol pull-down menu, choose ‘Xmodem’.f.Click Send.A dialog box appears and reports the update progress. Whencomplete, a ‘Flash Complete’ message appears. Press any key tocontinue.Important:Keep the adapter powered for 15 seconds after theoperation has completed or until the adapter MOD statusindicator starts flashing green.TIP: To cancel the flash update at any time, press Ctrl-X.9.Repeat steps 4 through 8 for the‘20-COMM-H_2_009_05_ComboNewHdr.bin’ file.10.Repeat steps 4 through 8 for the‘20-COMM-H_2_001_02_BootNewHdrV2.bin’ file.11.After the firmware update successfully completes, set the adapternetwork protocol rotary switch to the desired mode (RTU, N2 or P1) inwhich you want to operate the adapter.Important:Changing to a new rotary switch position requires you topower cycle the drive.12.Press Enter to return to the main menu.Restrictions For PowerFlex 753 and PowerFlex 755 Drives, these restrictions apply:•The Reference and Feedback words are internally scaled 1:32 to allow arange of 0 to 650.00 Hz.•32-bit floating point parameters are mapped as follows:–Datalinks are mapped as Little Endian (that is, Low/High wordordering).–User In/Out registers are mapped as Big Endian (that is, High/Lowword ordering).–Direct DPI parameters are mapped as Big Endian (that is, High/Lowword ordering).–This mapping structure also applies to PowerFlex 700VC driveswhich use 32-bit Datalinks.U.S.Allen-BradleyDrivesTechnicalSupport-Tel:(1)262.512.8176,Fax:(1)262.512.2222,Email:*****************,Online:/support/abdrivesCompatible Revisions To use this revision of firmware, update your tools and devices as needed.Rockwell AutomationSupport Rockwell Automation provides technical information on the web to assist you in using our products. At , youcan find technical manuals, a knowledge base of Frequently AskedQuestions (FAQs), technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.Rockwell Automation also provides complimentary phone support for drives, communication adapters, and peripherals. If you experience a problem with a device, please see the information in its User Manual. For further help in getting your device operational, contact a Customer Support representative.For an additional level of technical phone support for installation, configuration, and troubleshooting, TechConnect Support programs are available. For more information, contact your local distributor, a Rockwell Automation representative, or visit . Product Satisfaction Return Rockwell Automation tests all products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow the steps below. Tool/DeviceVersion Required DriveExplorer Lite/Full software4.01 or later DriveExecutive software3.01 or later PowerFlex 7-Class driveall versions compatible LCD HIMall versions compatible RSLinx Classic software 2.43 or laterUnited States (1) 262.512.8176Monday – Friday, 7am – 6pm CST Outside United States Please contact your local Rockwell Automation representative for any technical support issues.United States Contact your distributor. You must provide a Customer Support case number (see phone number above to obtain one) to your distributor to complete the return process.Outside United States Contact your local Rockwell Automation representative for the return procedure.。