DVGW-W512中文翻译

合集下载

明基(BenQ)MW512商务投影机白皮书

明基(BenQ)MW512 商务投影机技术规格(一) 综合测评明基MW512是一款商住两用3D投影机，拥有1280×800的真实分辨率，和2800流明的亮度，对比度达到4000：1。

可以兼顾高清和3D像。

其采用低功耗设计，节能方面有着很好的表现。

明基MW512，使用了DLP投影芯片，灯泡为超高压汞灯，功率高达190W，官方报出的灯泡使用寿命在正常模式下可使用4500小时，在经济模式下可使用6000小时，比同类产品寿命较长。

使用手动变焦的方式，投影尺寸在23-300英寸，可选择4:3/16:9两种屏幕比例，基本满足了绝大多数的商务会议演示要求，明基MW512支持3D投影。

外观方面，明基MW512采用全黑色风格，机身顶部整齐的设计了按键、品牌LOGO和技术标识。

机身小巧，方便移动，用户可以桌面投影，也可选择吊装投影。

性能方面，明基MW512采用DLP显示技术，亮度达到2800流明，其对比度达到4000：1，拥有1280×800的真实分辨率，支持±40度垂直梯形校正，在2米的距离可投影72英寸的大画面。

此外，基MW512投影机接口设计非常丰富，具备一个HDMI高清接口，以及一个可直接演示的USB接口，还有两组VGA输入接口和一个VGA输出接口，还有常见的S-Video和A V 接口及Audio音频接口。

明基MW512拥有265×100×210mm的外观尺寸，其重约2.6kg。

整机内置190瓦的灯泡，普通模式下拥有4500小时的使用寿命，而在经济模式下使用时间高达6000小时。

同时其拥有3000流明的亮度和3500:1的投影对比度，采用DLP投影技术，标准分辨率达到1280×800，支持4:3、16:9的投影比例，投影尺寸在23-300英寸之间。

点评：明基MW512投影机拥有1280×800的真实分辨率，且支持3D立体显示，亮度达到2800流明，可以满足高清商务演示或家庭3D高清影院的需求。

迪农家庭声音棒550快速入门指南说明书

BASIC TROUBLESHOOTINGMy Sound bar won’t connect to my networkMake sure your mobile device is connected to your wireless network before setting up your sound bar.A lternatively, you can connect your sound bar to your network router using an Ethernet cable (sold separately).Once connected via Ethernet, the HEOS App should recognize the sound bar and you can manually move it to your wireless network using “Settings” - “My Devices” - “(Device Name)” - “Advanced” - “NETWORK SETTINGS”.I don’t hear the TV sound coming from the sound barC heck cable connection between the sound bar and your TV and other devices. Ensure cables are fully connected and connected to the right ports.E nsure that TV Speakers are “Off” in your TV settings menu*I f you are using HDMI eARC/ARC as your connection between your sound bar and your TV, ensure that “ARC” setting is “On” in your TV settings*** Note: “TV Speakers” settings may be labeled as Receiver, or External speakers depending on your make of TV.** Note: Not all TV’s have these settings.V erify that CEC functions are enabled in your TV’s Settings Menu.C heck that your sound bar is assigned to correct the input source. T o find which input the sound bar is currently set to, open the HEOS App and navigate to “Music” View > “Settings” > “My Devices” > “TV Input”.T o update the connection go to “Music” View > “Settings” > “My Devices” > “TV Input” > Select the Input type that currently connects your sound bar and your TV.Music cuts out or delays sometimesMake sure your Internet connection is operating correctly.I f you are sharing your network with other users or devices, they may be using most of your bandwidth (especially if they are streaming video).Make sure your sound bar is within range of your wireless network.M ake sure your sound bar is not located near other electronic devices that could interfere with it’s wireless connectivity (like microwave ovens, cordless phones, TVs, etc…). ** Connect your sound bar to your network using an optional Ethernet cable if possible.9。

Epson EB-W51项目机数据手册说明书

EB-W51DATASHEET / BROCHURETurn heads at home and in the office with this high-quality, long-lasting and flexible WXGA projector.Supersize your content in the office and at home with this high-quality, versatile projector. Thanks to its powerful 4,000 lumen 3LCD technology, it delivers incredibly bright and clear images, even when there’s ambient light. The long-lasting lamp light source means it's a cost-effective piece of kit. It's also easy to transport and set up with no fuss.Bigger is betterWhether you’re watching your favourite film or delivering a presentation, this projector can achieve an impressive 320 inch display. It's great quality too, with 3LCD technology that makes the display up to three times brighter thancompetitor products¹. In addition to its bright and vivid colours, the 16,000:1 contrast ratio produces defined shadows and deep blacks. From family and friends to business colleagues and clients, it's sure to get everyone’s attention.High-quality, bright imagesEven in bright rooms, this powerful yet affordable WXGA projector deliversexceptionally bright yet colourful images with clear details. It's all thanks to 3LCD technology, which produces an equally high White and Colour Light Output of 4,000 lumens.Long-lasting solutionLooking for a long-term, hassle-free and affordable solution for your projection needs? This model's long-lasting lamp light source provideds you with 18 years' worth of entertainment².Stress-free set-upHere’s a projector that’s designed with portability and quick set up in mind. The carry case makes it easy to move from room to room, and you can quicklyposition the image with keystone correction and access content simply with the HDMI inputs. Thanks to the optional ELPAP10 adapter, it offers Wi-Fi connectivity, allowing you to share content from a smart device using the iProjection app.KEY FEATURESCreate the big screen experience From box sets to businesspresentations, capture everyone's attentionBright even with ambient light Equally high White and Colour Light Output of 4,000 lumensAffordable, high-tech equipment Enjoy this WXGA projector Long-lasting solution18 years' worth of entertainment²Portable and quick to set up Transport with a carry case andkeystone slider for easy alignmentPRODUCT SPECIFICATIONSTECHNOLOGYProjection System3LCD Technology, RGB liquid crystal shutterLCD Panel0,59 inch with C2 FineIMAGEColor Light Output 4.000 Lumen- 2.600 Lumen (economy) In accordance with ISO 21118:2013White Light Output 4.000 Lumen - 2.600 Lumen (economy) In accordance with ISO 21118:2013Resolution WXGA, 1280 x 800, 16:10Contrast Ratio16.000 : 1Lamp UHE, 210 W, 6.000 h durability, 12.000 h durability (economy mode)Keystone Correction Auto vertical: ± 30 °, Manual horizontal ± 30 °Colour Reproduction Upto 1.07 billion coloursOPTICALThrow Ratio1,30 - 1,56:1Zoom Manual, Factor: 1,2Screen Size33 inches - 320 inchesProjection Distance Wide/Tele1,68 m - 2,02 m ( 60 inch screenProjection Lens F Number1,49 - 1,72Projection Lens Focal Length16,9 mm - 20,28 mmProjection Lens Focus ManualOffset10 : 1CONNECTIVITYUSB Display Function 3 in 1: Image / Mouse / SoundInterfaces USB 2.0 Type A, USB 2.0 Type B, VGA in, HDMI in, Composite in, Cinch audio in, Wireless LAN IEEE 802.11b/g/n (optional)Epson iProjection App Ad-Hoc / InfrastructureADVANCED FEATURESSecurity Kensington lock, Security cable hole, Wireless LAN unit lock, Password protection3D NoOther features AV Mute Slide, Auto source search, Built-in speaker, Horizontal and vertical keystonecorrection, Long lamp life, Quick Corner, Split-Screen-FunctionVideo Color Modes Blackboard, Cinema, Dynamic, Presentation, sRGBGENERALPower consumption327 Watt, 225 Watt (economy), 0,3 Watt (standby), On mode power consumption as defined inJBMS-84 286 WattProduct dimensions302 x 237 x 82 mm (Width x Depth x Height)Product weight2,5 kgNoise Level Normal: 37 dB (A) - Economy: 28 dB (A)Included Software Content DIY App, iProjection, Epson Projector Management, Epson Projector Professional Tool Loudspeaker 2 WattRoom Type / Application Home Office, Home Photo, Streaming, TV & Box setsPositioning Ceiling Mounted, DesktopColour WhiteOTHERWarranty24 months Carry in, Lamp: 12 months or 1.000 h (whichever comes first)Optional warranty extension availableEB-W51WHAT'S IN THE BOXComputer cablePower cableMain unitWarranty cardUser manual (CD)Remote control incl. batteries Quick Start GuideCarrying CaseOPTIONAL ACCESSORIESLamp - ELPLP97 - EB9XX/W49/X/E20/U50 (2020 prior models)V13H010L97Dual Function Wireless Adapter (5Ghz Wireless & Miracast) -ELPAP11V12H005A01Air Filter - ELPAF32V13H134A32Screen (50" Desktop type) - ELPSC32V12H002S32Screen (80" Multi-Aspect) - ELPSC26V12H002S26Screen (80" Mobile X type16:9) - ELPSC21V12H002S21Soft Carry Case - ELPKS69 - EB-x05/x41/x42, EH-TW6 series V12H001K69LOGISTICS INFORMATIONSKU V11H977040EAN code 8715946680705Country of OriginPhilippinesEB-W511. Colour brightness(colour light output) in brightestmode, measured by a third-party lab in accordance with IDMS 15.4. Colour brightness will vary depending on usage conditions. Top-selling Epson 3LCD projectors versus top selling 1-chip DLP projectors based on NPD sales data for May 2017 – April 2018.2. Based on watching an average 1hr 45mins film every day and the lamp set in Eco mode.Epson Deutschland GmbH Otto-Hahn-Str. 4 D-40670 MeerbuschEpson in ÖsterreichInfo-Line: 01 253 49 78 333 www.epson.at。

MEMORY存储芯片NAND512W3A2DND中文规格书

One-Time Programmable (OTP) OperationsThis Micron NAND Flash device offers a protected, one-time programmable NANDFlash memory area. Each target has a an OTP area with a range of OTP pages (see Ta-ble 15 (page 95)); the entire range is guaranteed to be good. Customers can use theOTP area in any way they desire; typical uses include programming serial numbers orother data for permanent storage.The OTP area leaves the factory in an erased state (all bits are 1). Programming an OTPpage changes bits that are 1 to 0, but cannot change bits that are 0 to 1. The OTP areacannot be erased, even if it is not protected. Protecting the OTP area prevents furtherprogramming of the pages in the OTP area.Enabling the OTP Operation ModeThe OTP area is accessible while the OTP operation mode is enabled. To enable OTP op-eration mode, issue the SET FEATURES (EFh) command to feature address 90h andwrite 01h to P1, followed by three cycles of 00h to P2 through P4.When the target is in OTP operation mode, all subsequent PAGE READ (00h-30h) andPROGRAM PAGE (80h-10h) commands are applied to the OTP area.ERASE commands are not valid while the target is in OTP operation mode.Programming OTP PagesEach page in the OTP area is programming using the PROGRAM OTP PAGE (80h-10h)command. Each page can be programmed more than once, in sections, up to the maxi-mum number allowed (see NOP in Table 15 (page 95)). The pages in the OTP areamust be programmed in ascending order.If the host issues a PAGE PROGRAM (80h-10h) command to an address beyond themaximum page-address range, the target will be busy for t OBSY and the WP# status reg-ister bit will be 0, meaning that the page is write-protected.Protecting the OTP AreaTo protect the OTP area, issue the OTP PROTECT (80h-10h) command to the OTP Pro-tect Page. When the OTP area is protected it cannot be programmed further. It is notpossible to unprotect the OTP area after it has been protected.Reading OTP PagesTo read pages in the OTP area, whether the OTP area is protected or not, issue the PAGEREAD (00h-30h) command.If the host issues the PAGE READ (00h-30h) command to an address beyond the maxi-mum page-address range, the data output will not be valid. To determine whether thetarget is busy during an OTP operation, either monitor R/B# or use the READ STATUS(70h) command. Use of the READ STATUS ENHANCED (78h) command is prohibitedwhile the OTP operation is in progress.Returning to Normal Array Operation ModeTo exit OTP operation mode and return to normal array operation mode, issue the SETFEATURES (EFh) command to feature address 90h and write 00h to P1 through P4.If the RESET (FFh) command is issued while in OTP operation mode, the target will exitOTP operation mode and enter normal operating mode. If the synchronous interface isactive, the target will exit OTP operation and enable the asynchronous interface.16Gb, 32Gb, 64Gb Asynchronous/Synchronous NAND One-Time Programmable (OTP) OperationsPDF: 09005aef844588dc M72A_16Gb_32Gb_64Gb_AsyncSync_NAND.pdf – Rev. G 5/12 ENTable 20: Output Drive Strength Impedance Values (V CCQ = 2.7–3.6V) (Contin-ued)Table 21: Pull-Up and Pull-Down Output Impedance MismatchNotes: 1.Mismatch is the absolute value between pull-up and pull-down impedances. Both aremeasured at the same temperature and voltage.2.Test conditions: V CCQ = V CCQ (MIN), V OUT = V CCQ × 0.5, T A = T OPER .16Gb, 32Gb, 64Gb Asynchronous/Synchronous NAND Output Drive ImpedancePDF: 09005aef844588dcM72A_16Gb_32Gb_64Gb_AsyncSync_NAND.pdf – Rev. G 5/12 ENFigure 63: PROGRAM OTP PAGE (80h-10h) with CHANGE WRITE COLUMN (85h) OperationDQ[7:0]R/B#DQ[7:0]R/B#PROTECT OTP AREA (80h-10h)The PROTECT OTP AREA (80h-10h) command is used to prevent further programmingof the pages in the OTP area. The protect the OTP area, the target must be in OTP opera-tion mode.To protect all data in the OTP area, issue the 80h command. Issue five address cyclesincluding the column address, OTP protect page address and block address; the column and block addresses are fixed to 0. Next, write 00h data for the first byte location andissue the 10h command.R/B# goes LOW for the duration of the array programming time, t PROG. The READ STA-TUS (70h) command is the only valid command for reading status in OTP operationmode. The RDY bit of the status register will reflect the state of R/B#. Use of the READSTATUS ENHANCED (78h) command is prohibited.When the target is ready, read the FAIL bit of the status register to determine if the oper-ation passed or failed (see Status Operations).If the PROTECT OTP AREA (80h-10h) command is issued after the OTP area has alreadybeen protected, R/B# goes LOW for t OBSY. After t OBSY, the status register is set to 60h.16Gb, 32Gb, 64Gb Asynchronous/Synchronous NAND One-Time Programmable (OTP) Operations。

DVW数字分量录像机

DVW数字分量录像机DVW数字分量录像机DVW数字分量录像机磁带记录是目前记录电视信号的主要手段。

录像机是实现磁带记录的专用设备,在一个节目制作系统中,录像机的技术指标基本决定着整个系统的技术指标。

因为受各种条件的限制,模拟录像机的技术指标并不高,特别是多版复制,信号质量下降很多。

因此提高录像机的技术指标,也就意味着整个系统技术指标可以得到提高。

数字录像机记录的是数字信号,抗干扰能力强,因而重放信号的性能改善很多,使录像机可复制性能大大提高,多版复制信号基本没损失。

因此,数字录像机的使用,将拓宽后期制作手段,极大地提高最后播出带的信号质量。

一、概述SONY公司于1993年推出Betacam数字分量录像机,引起了众人的关注,经过实践的严格检验,数字Betacam得到了广大用户的赞同。

数字Betacam与通常Betacam 和Betacam SP有相同的格式,与后者相比,以稍慢的带速和三倍的磁鼓转速录制,每场的视频信号及4-通道音频信号将以六个螺旋磁迹记录到磁带上,斜磁迹宽度:24μm,并与模拟Betacam重放功能兼容。

(有的机型不含此功能)数字Betacam 采用数字分量记录, ITU-R BT.601 标准,考虑到将来记录16:9宽屏幕HDTV数字信号的可能性;采用1/2英寸金属带,图像量化比特8/10bit两种,正程取样点720×576,抽样频率分别为:13.5MHz、6.75MHz、6.75MHz, 即4:2:2取样方式,压缩比为:2:1。

声音抽样频率为48KHz,量化比特为20bit,不压缩。

数字Betacam采用了大规模集成电路(LSI),使得整机更为轻便,低功耗,与Betacam SP有相同的尺寸,在实况转播车这样有限的空间里使用更为方便、灵活、实效。

二、特点1.优异的画面质量具有多代复制能力,突破了模拟记录的局限性。

2.先读后写的预读编辑功能在DVW-A500P和DVW-500P录像机中,用于数字信号的重放磁头位于记录磁头之前,先前记录的视频与音频信号经重放头读出后可送到外部设备中处理,然后重新记录到相同的磁迹上,此功能尤其适用于叠加字幕、彩色校正、视频分层处理、音频混合和润色等处理。

小型机配置中英文对照

1 9117-MMA Server 1:9117 Model MMA Server1:9117 Model MMA 台12 265 AIX Partition Specify AIX分区指示个23 1120 Decline Service Agent Install Indicator 拒绝安装电子服务代理指示符 14 1802 GX DualPort- 12X Channel Attach GX双端口12x通道适配卡 15 1845 Operator Panel 操作面板个16 1862 1.5 Meter 12X DDR Cable 1.5 Meter 12X DDR Cable 条17 1865 3.0 Meter 12X DDR Cable 3.0 Meter 12X DDR Cable 条18 2146 Primary OS - AIX 主操作系统- AIX 19 3125 Serial-to-SerialPort Cable for Rack/Rack 机架/机架的串行到串行端口线,8米条210 3647 146 GB 15K RPM SAS Disk Drive 146 GB 1.5万转/分钟SAS磁盘驱动器块411 3660 Processor Fabric Cable, 2 enclosure 处理器构架线缆, 用于2个机箱条112 3925 0.3MSerialPort Converter Cable, 9-Pin to 25-Pin 0.3米串行端口转换线, 9针脚至25针脚条213 4651 Rack Indicator, Rack #1 机架指示器,1#机架 114 5005 Software Preinstall 软件预安装 115 5620 3.5 GHz Proc Card, 0/2 Core POWER6, 12 DDR2 Memory Slots 3.5 GHz处理器卡, 0/2核POWER6, 12 DDR2内存插槽个416 5625 Proc Power Regulator 处理器电源稳压器个617 5628 Sys AC Power Supply, 1600 W 系统交流电源, 1600瓦个418 5636 Integrated, 2X- 1Gb Virtual Ethernet, I/O ports 集成的双端口,1Gb虚拟以太网, I/O端口块219 5648 Service Interface Card 服务接口卡块220 5657 Serv Interface Cable- 2 Enclosure 服务接口线-2个机箱条121 5663 Proc Enclosure and Backplane 处理器机箱和背板个222 5666 I/O Backplane 输入/输出底板个223 5667 System Midplane 系统中间板个224 5670 One Processor Activation for Processor Feature #5620 #5620特性的一路处理器激活路825 5674 SATA Media Enclosure and Backplane SATA Media Enclosure and Backplane 个126 5680 Activation of 1GB DDR2 POWER6 Memory 1GB DDR2 POWER6内存激活个3227 5682 Power 570 System Bezel Power 570系统面板个228 5683 System Chassis - 4 EIA 系统底盘-4 EIA 个229 5693 0/4GB DDR2 Memory (4X1GB) DIMMS- 667 MHz- POWER6 CUoD Memory 0/4GB DDR2内存(4X1GB) DIMMS- 667 MHz- POWER6 CoD内存条830 5699 System Ship Group 系统运输组 131 5706 IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter IBM双端口10/100/1000基带-TX以太网PCI-X适配器块232 5717 4-Port 10/100/1000 Base-TX PCI Express Adapter 4端口10/100/1000 Base-TX PCI Express适配器块233 5723 2-Port Asynchronous EIA-232 PCI Adapter 双端口异步EIA-232 PCI适配器块234 5767 2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter 双端口0/100/1000 Base-TX 以太网PCI Express适配器块 235 5773 4 Gigabit PCI Express Single Port Fibre Channel Adapter 4 G 比特PCI Express单端口光纤通道适配器块436 5796 PCI-DDR 12X Expansion Drawer PCI-DDR 12X扩展抽屉个137 5878 SAS Disk Backplane -6 slot SAS Disk Backplane -6 slot 个238 5912 PCI-X DDR Dual - x4 SAS Adapter PCI-X DDR双- x4 SAS适配器个139 6006 Power Control Cable (SPCN) - 3 meter 电源控制线(SPCN)-3米条240 6008 Power Control Cable (SPCN) - 6 meter 电源控制线(SPCN)-6米条141 6446 Dual-port 12X Channel Attach- Short Run 双端口12X通道(短距离)个142 6458 Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A 抽屉到IBM PDU的电源线(14英尺,250伏/10安)条 243 6671 Power Cord (9-foot), Drawer to IBM PDU, 250V/10A 电源线,2.7米(9英尺),抽屉到IBM PDU,(250伏/10安) 条444 7164 IBM/OEM Rack-mount Drawer Rail Kit - Adjustable DepthIBM/OEM上机架抽屉滑轨套件-深度可调 245 7870 Power Distribution Backplane 电源分配背板 246 7942 PowerVM -Standard Edition 高级POWER虚拟化(标准版)847 9440 New AIX License Core Counter New AIX License Core Counter 848 9722 Language Group Specify - Simplified Chinese (PRC) 语言---简体中文 149 7214-1U2 Tape and DVD Enclosure Express Tape and DVD Enclosure Express 个150 1400 DAT72 Tape Drive DA T72 Tape Drive 个151 1421 DVD Sled w/1 DVD-ROM Drive DVD Sled w/1 DVD-ROM Drive 个152 9125 DVD Drive Panel (Blank) DVD Drive Panel (Blank) 个153 9722 Simplified Chinese Manuals 语言---简体中文 154 9743 3.0 m External SAS Cable 3.0 m External SAS Cable 条155 9860 2.7m (9ft) Rack Power Cord,AC,Single 2.7m (9ft) Rack Power Cord,AC,Single 条156 5313-HPO IBM Power Software HIPO IBM Power Software HIPO 157 572 9117-MMA Routing Code 9117-MMA Routing Code 158 967 Base OS AIX 标准版 159 1053 OS Specify code for 5.3 操作系统指示代码AIX5.3 160 1403 64-bit kernel 64位内核 161 2215 IBM PowerHA 5.5 IBM PowerHA 5.5 162 5000 Preload 要求软件预安装 163 5987 Traditional Chinese Preinstall PII Language 预安装语言-繁体中文 164 9210 HW is Rack integrated 硬件集成在机架内 1******************************* 软件部分*******************************序号产品英文描述中文描述单位数量65 5662-HMP IBM POWERHA Reg:3Yr IBM POWERHA Reg:3Yr 166 A0DA IBM POWERHA Base SWMA per proc 3Y Reg MEDIUM IBM POWERHA Base SWMA per proc 3Y Reg MEDIUM 867 5692-A5L System Software AIX 5L 5.3 系统软件 168 967 AIX V5.3 Standard Edition AIX 标准版 169 968 Expansion pack 扩展包 170 970 AIX 5L V5.3 Update CD AIX 更新CD 171 1100 DVD Process Charge DVD介质费用 172 2209 IBM Management Edition for AIX IBM Management Edition for AIX 173 2215 IBM POWERHA V5.5 IBM POWERHA V5.5 174 2924 English Language 英语语言 175 3435 DVD/CD-ROM DVD/CD-ROM 176 5692-A5L System Software AIX 5L 5.3 系统软件 177 1101 DVD Process No Charge DVD Process No Charge 178 1404 VIOS Expansion Pack VIOS Expansion Pack 179 2201 Virtual I/O Server Virtual I/O Server 180 2924 English Language 英语语言 181 3435 DVD/CD-ROM DVD/CD-ROM 182 5692-LOP SPO for Linux on POWER SPO for Linux on POWER 183 1101 DVD Process No Charge DVD Process No Charge 184 1479 System p A VE x86 Media System p A VE x86 Media 185 3435 DVD/CD-ROM DVD/CD-ROM 186 5765-AME IBM Management Edition for AIX IBM Management Editionfor AIX 187 B9BB Per processor F5 Per processor F5 888 5765-AVE IBM PowerVM Lx86 for x86 Linux IBM PowerVM Lx86 for x86 Linux 189 B8RK Per server Per server 190 5765-F62 IBM POWERHA V5 IBM POWERHA V5 191 B8NG Per Proc with 1 Year SW Maint MEDIUM Per Proc with 1 Year SW Maint MEDIUM 892 5765-G03 AIX 5L V5.3 操作系统AIX版本5.3 193 B7ME Per Processor F5 AIX 5L V5.3 Per Processor F5 AIX 5L V5.3 894 5765-PVS PowerVM Standard Edition PowerVM Standard Edition 195 B9HC Per Processor large System Per Processor large System 896 5773-AME IBM Management Edition for AIX SW Maint: 3 Yr IBM Management Edition for AIX SW Maint: 3 Yr 197 A0LC Per Processor F5 3 Year Registration Per Processor F5 3 Year Registration 898 5773-PVS PowerVM Standard Edition SW Maintenance: 3 Yr PowerVM Standard Edition SW Maintenance: 3 Yr 199 A0MR Per Processor large system 3yr reg Per Processor large system 3yr reg 8100 5773-SM3 Software Maintenance for AIX, 3 Year Software Maintenance for AIX, 3 Year 1101 466 F5 3 Yr SWMA for AIX per Processor Reg/Ren F5 3 Yr SWMA for AIX per Processor Reg/Ren 8******************************* 硬件部分*******************************序号产品英文描述中文描述单位数量102 9117-MMA Server 2:9117 Model MMA Server 2:9117 Model MMA 台1103 265 AIX Partition Specify AIX分区指示个2104 1120 Decline Service Agent Install Indicator 拒绝安装电子服务代理指示符 1105 1802 GX DualPort- 12X Channel Attach GX双端口12x通道适配卡 1106 1845 Operator Panel 操作面板个1107 1862 1.5 Meter 12X DDR Cable 1.5 Meter 12X DDR Cable 条1108 1865 3.0 Meter 12X DDR Cable 3.0 Meter 12X DDR Cable 条1109 2146 Primary OS - AIX 主操作系统- AIX 1110 3125 Serial-to-SerialPort Cable for Rack/Rack 机架/机架的串行到串行端口线,8米条2 111 3647 146 GB 15K RPM SAS Disk Drive 146 GB 1.5万转/分钟SAS磁盘驱动器块4 112 3660 Processor Fabric Cable, 2 enclosure 处理器构架线缆, 用于2个机箱条1113 3925 0.3MSerialPort Converter Cable, 9-Pin to 25-Pin 0.3米串行端口转换线, 9针脚至25针脚条 2114 4651 Rack Indicator, Rack #1 机架指示器,1#机架 1115 5005 Software Preinstall 软件预安装 1116 5620 3.5 GHz Proc Card, 0/2 Core POWER6, 12 DDR2 Memory Slots 3.5 GHz处理器卡, 0/2核POWER6, 12 DDR2内存插槽个4117 5625 Proc Power Regulator 处理器电源稳压器个6118 5628 Sys AC Power Supply, 1600 W 系统交流电源, 1600瓦个4119 5636 Integrated, 2X- 1Gb Virtual Ethernet, I/O ports 集成的双端口,1Gb虚拟以太网, I/O 端口块 2120 5648 Service Interface Card 服务接口卡块2121 5657 Serv Interface Cable- 2 Enclosure 服务接口线-2个机箱条1122 5663 Proc Enclosure and Backplane 处理器机箱和背板个2123 5666 I/O Backplane 输入/输出底板个2124 5667 System Midplane 系统中间板个2125 5670 One Processor Activation for Processor Feature #5620 #5620特性的一路处理器激活路8126 5674 SATA Media Enclosure and Backplane SATA Media Enclosure and Backplane 个1 127 5680 Activation of 1GB DDR2 POWER6 Memory 1GB DDR2 POWER6内存激活个32 128 5682 Power 570 System Bezel Power 570系统面板个2129 5683 System Chassis - 4 EIA 系统底盘-4 EIA 个2130 5693 0/4GB DDR2 Memory (4X1GB) DIMMS- 667 MHz- POWER6 CUoD Memory 0/4GB DDR2内存(4X1GB) DIMMS- 667 MHz- POWER6 CoD内存条8131 5699 System Ship Group 系统运输组 1132 5706 IBM 2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter IBM 双端口10/100/1000基带-TX以太网PCI-X适配器块2133 5717 4-Port 10/100/1000 Base-TX PCI Express Adapter 4端口10/100/1000 Base-TX PCI Express适配器块2134 5723 2-Port Asynchronous EIA-232 PCI Adapter 双端口异步EIA-232 PCI适配器块2 135 5767 2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter 双端口0/100/1000 Base-TX以太网PCI Express适配器块2136 5773 4 Gigabit PCI Express Single Port Fibre Channel Adapter 4 G比特PCI Express单端口光纤通道适配器块4137 5796 PCI-DDR 12X Expansion Drawer PCI-DDR 12X扩展抽屉个1138 5878 SAS Disk Backplane -6 slot SAS Disk Backplane -6 slot 个2139 5912 PCI-X DDR Dual - x4 SAS Adapter PCI-X DDR双- x4 SAS适配器个1140 6006 Power Control Cable (SPCN) - 3 meter 电源控制线(SPCN)-3米条2141 6008 Power Control Cable (SPCN) - 6 meter 电源控制线(SPCN)-6米条1142 6446 Dual-port 12X Channel Attach- Short Run 双端口12X通道(短距离)条1143 6458 Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A 抽屉到IBM PDU的电源线(14英尺,250伏/10安)个 2144 6671 Power Cord (9-foot), Drawer to IBM PDU, 250V/10A 电源线,2.7米(9英尺),抽屉到IBM PDU,(250伏/10安) 条4145 7164 IBM/OEM Rack-mount Drawer Rail Kit - Adjustable DepthIBM/OEM上机架抽屉滑轨套件-深度可调条2146 7314 I/O Drawer Mounting Enclosure 输入/输出抽屉上架套件 1147 7870 Power Distribution Backplane 电源分配背板 2148 7942 PowerVM -Standard Edition 高级POWER虚拟化(标准版)8149 9440 New AIX License Core Counter New AIX License Core Counter 8150 9722 Language Group Specify - Simplified Chinese (PRC) 语言---简体中文 1151 7214-1U2 Tape and DVD Enclosure Express Tape and DVD Enclosure Express 个1152 1400 DAT72 Tape Drive DA T72 Tape Drive 个1153 1421 DVD Sled w/1 DVD-ROM Drive DVD Sled w/1 DVD-ROM Drive 个1154 9125 DVD Drive Panel (Blank) DVD Drive Panel (Blank) 个1155 9722 Simplified Chinese Manuals 语言---简体中文 1156 9743 3.0 m External SAS Cable 3.0 m External SAS Cable 条1157 9860 2.7m (9ft) Rack Power Cord,AC,Single 2.7m (9ft) Rack Power Cord,AC,Single 条1 158 7014-T42 Rack 1:Rack Model T42 T42机柜(2.0米)个1159 232 Rack Content Specify: 9117/570 or 9117-MMA or 8234-EMA - 8U Rack Content Specify: 9117/570 or 9117-MMA or 8234-EMA - 8U 2160 233 Rack Content Specify: 7316/TF3 - 1EIA Rack Content Specify: 7316/TF3 - 1EIA 1 161 256 Rack Content Specify: FC #5796 OR 7314-G30 - 4EIA Rack Content Specify: FC #5796 OR 7314-G30 - 4EIA 1162 274 Rack Content Specify: 7214-1U2 - 1 EIA unit 媒体抽屉,19英寸 2163 286 Rack Content Specify: 7042/CR5 1U Rack Content Specify: 7042/CR5 1U 1164 4651 Rack Indicator, Rack #1 机架指示器,1#机架 4165 6069 Front door (Black) for High Perforation (2m racks) 2米机架的可选前门个1166 6098 Side Panel (Black) 黑色侧板个2167 6491 PDU to Wall Powercord 14', 200-240V/48A, UTG0247, IEC309 63A P+N+G 4.3米(14英尺) 1PH/48安电源线条3168 7188 Power Dist Unit-Side Mount, Universal UTG0247 Connector 机柜上的电源分配单元(PDU)个 2169 9188 Power Distrib Unit Specify - Base/Side Mount, Universal UTG0247 Connector Power Distrib Unit Specify - Base/Side Mount, Universal UTG0247 Connector 1170 9722 Language Group Specify - Simplified Chinese (PRC) 语言---简体中文 1171 5313-HPO IBM Power Software HIPO IBM Power Software HIPO 1172 572 9117-MMA Routing Code 9117-MMA Routing Code 1173 967 Base OS AIX 标准版 1174 1053 OS Specify code for 5.3 操作系统指示代码AIX5.3 1175 1403 64-bit kernel 64位内核 1176 2215 IBM PowerHA 5.5 IBM PowerHA 5.5 1177 5000 Preload 要求软件预安装 1178 5987 Traditional Chinese Preinstall PII Language 预安装语言-繁体中文 1179 9210 HW is Rack integrated 硬件集成在机架内 1******************************* 软件部分*******************************序号产品英文描述中文描述单位数量180 5662-HMP IBM POWERHA Reg:3Yr IBM POWERHA Reg:3Yr 1181 A0DA IBM POWERHA Base SWMA per proc 3Y Reg MEDIUM IBM POWERHA Base SWMA per proc 3Y Reg MEDIUM 8182 5692-A5L System Software AIX 5L 5.3 系统软件 1183 967 AIX V5.3 Standard Edition AIX 标准版 1184 968 Expansion pack 扩展包 1185 970 AIX 5L V5.3 Update CD AIX 更新CD 1186 1100 DVD Process Charge DVD介质费用 1187 2209 IBM Management Edition for AIX IBM Management Edition for AIX 1188 2215 IBM POWERHA V5.5 IBM POWERHA V5.5 1189 2924 English Language 英语语言 1190 3435 DVD/CD-ROM DVD/CD-ROM 1191 5692-A5L System Software AIX 5L 5.3 系统软件 1192 1101 DVD Process No Charge DVD Process No Charge 1193 1404 VIOS Expansion Pack VIOS Expansion Pack 1194 2201 Virtual I/O Server Virtual I/O Server 1195 2924 English Language 英语语言 1196 3435 DVD/CD-ROM DVD/CD-ROM 1197 5692-LOP SPO for Linux on POWER SPO for Linux on POWER 1198 1101 DVD Process No Charge DVD Process No Charge 1199 1479 System p A VE x86 Media System p A VE x86 Media 1200 3435 DVD/CD-ROM DVD/CD-ROM 1201 5765-AME IBM Management Edition for AIX IBM Management Edition for AIX 1202 B9BB Per processor F5 Per processor F5 8203 5765-A VE IBM PowerVM Lx86 for x86 Linux IBM PowerVM Lx86 for x86 Linux 1 204 B8RK Per server Per server 1205 5765-F62 IBM POWERHA V5 IBM POWERHA V5 1206 B8NG Per Proc with 1 Year SW Maint MEDIUM Per Proc with 1 Year SW Maint MEDIUM 8207 5765-G03 AIX 5L V5.3 操作系统AIX版本5.3 1208 B7ME Per Processor F5 AIX 5L V5.3 Per Processor F5 AIX 5L V5.3 8209 5765-PVS PowerVM Standard Edition PowerVM Standard Edition 1210 B9HC Per Processor large System Per Processor large system 8211 5773-AME IBM Management Edition for AIX SW Maint: 3 Yr IBM Management Edition for AIX SW Maint: 3 Yr 1212 A0LC Per Processor F5 3 Year Registration Per Processor F5 3 Year Registration 8213 5773-PVS PowerVM Standard Edition SW Maintenance: 3 Yr PowerVM Standard Edition SW Maintenance: 3 Yr 1214 A0MR Per Processor large system 3yr reg Per Processor large system 3yr reg 8215 5773-SM3 Software Maintenance for AIX, 3 Year Software Maintenance for AIX, 3 Year 1216 466 F5 3 Yr SWMA for AIX per Processor Reg/Ren F5 3 Yr SWMA for AIX per Processor Reg/Ren 8******************************* 硬件部分*******************************序号产品英文描述中文描述单位数量217 7042-CR5 HMC 1:7042-CR5 Rack-mounted Hardw.Mgmt.Console HMC1:7042-CR5 Rack-mounted Hardw.Mgmt.Console 台1218 31 No modem No modem 1219 962 Hardware Management Console Licensed Machine Code v7 Hardware Management Console Licensed Machine Code v7 1220 4651 Rack Indicator, Rack #1 机架指示器,1#机架 1221 4765 HMC CR5 Redundant Power Supply, 675 W HMC CR5 Redundant Power Supply, 675 W 个1222 6458 Power Cable -- Drawer to IBM PDU, 14-foot, 250V/10A 抽屉到IBM PDU的电源线(14英尺,250伏/10安)条 2223 9069 HMC/Server Order Linkage Indicator HMC/Server Order Linkage Indicator 1224 9722 Language Group Specify - Simplified Chinese (PRC) 语言---简体中文 1225 7316-TF3 IBM 7316-TF3 Rack-Mounted Flat Panel Console Kit IBM 7316-TF3 Rack-Mounted Flat Panel Console Kit 个1226 4242 6 Foot Extender Cable for Displays 1.8米(6英尺)的显示延长线, 15针脚至15针脚条1227 4651 Rack Indicator, Rack #1 机架指示器,1#机架 1228 8880 Space Saver 2 Keyboard, US English Space Saver 2 Keyboard, US English 1229 9300 Language Group Specify - US English 语言---英语 1230 9911 Power Cord (4M) All (Standard Cord) Power Cord (4M) All (Standard Cord) 条1******************************* 软件部分*******************************序号产品英文描述中文描述单位数量231 5773-RS3 Initial Software SupPort 3 Year Initial Software Support 3 Year 1232 569 Per Processor Software SupPort 3 Year Per Processor Software Support 3 Year 1 233 7000 Agreement for MCRSA Agreement for MCRSA 1。

W5300中文用户数据手册-v1

W5300中文用户数据手册v1一、产品概述1. 高性能处理器，保证流畅运行。

2. 大容量存储空间，满足您的存储需求。

3. 丰富接口，方便连接各种设备。

4. 定制化系统，轻松应对各种应用场景。

二、包装清单1. W5300主机2. 电源适配器3. USB数据线4. 用户数据手册（即本手册）5. 保修卡如有缺失，请及时与销售商联系。

三、设备外观与按键功能1. 电源键：长按开启/关闭设备，短按进入休眠状态。

2. 音量键：调节设备音量。

3. Home键：返回主界面。

4. 功能键：自定义按键，可设置快捷功能。

5. USB接口：连接USB设备，如U盘、键盘等。

6. 耳机接口：连接耳机。

7. 充电接口：连接电源适配器进行充电。

四、初始设置4.1 开启设备1. 将电源适配器插入电源插座。

2. 将充电线一端插入设备充电接口，另一端连接电源适配器。

3. 长按电源键，开启设备。

4.2 语言选择1. 在开机过程中，根据提示选择中文简体或中文繁体。

2. 按照屏幕提示完成剩余设置。

4.3 连接WiFi1. 在主界面找到“设置”应用。

2. 选择“无线和网络”选项，进入WiFi设置。

3. 按照屏幕提示连接到您的WiFi网络。

五、基本操作5.1 滑动屏幕1. 向上滑动：查看通知栏。

2. 向下滑动：快速设置。

3. 向左滑动：切换上一个应用。

4. 向右滑动：切换下一个应用。

5.2 点按屏幕1. 单击：选中某个应用或选项。

2. 长按：弹出快捷菜单或进入编辑状态。

5.3 使用应用1. 在主界面，找到您想要使用的应用图标。

2. 图标，进入应用。

3. 根据应用提示进行操作。

请继续阅读下一部分，了解更多关于W5300的高级功能和使用技巧。

六、系统设置与个性化6.1 调整屏幕亮度和分辨率为了让您的视觉体验更加舒适，您可以自定义屏幕亮度和分辨率：1. 在主界面找到“设置”应用。

2. 选择“显示”选项。

3. 在“亮度”中，拖动滑块调整亮度，或开启自动调节亮度。

DVK512 扩展板用户手册说明书

DVK512 Expansion Board For Raspberry PiUser ManualDVK512 is an expansion board designed for Raspberry Pi Model B+, integrates various components and interfaces for connecting external accessory boards. It's ideal for Raspberry Pi Model B+ evaluation and development.Supported Pi:●Raspberry Pi 1 Model A+●Raspberry Pi 1 Model B+●Raspberry Pi 2 Model B121. Pinheaders for connecting with the RPi2. UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART,etc.3. 8I/Os interface: easily connects to modules controlled by I/Os, such as 8 Push Buttons, LogicLevel Converter, Mix Board, etc.4. SPI interface: easily connects to SPI modules such as AT45DBXX Dataflash, L3G4200DBoard, etc.5. I2C interface: easily connects to I2C modules such as PCF8574 Expansion Board,PCF8563 RTC Board, LSM303DLHC Board, etc.6. Character LCD interface: for connecting character LCDs like LCD16027. USB connector: USB TO UART, supported by onboard converter CP21028. Power indicator9. User LEDs 10. User Keys11. Potentiometer: for LCD1602 contrast adjustment 12. RTC battery holder 13. PCF8563: onboard RTC chip 14. 32.768K crystal:RTC crystal15. CP2102: onboard USB TO UART chip, for debugging 16. CP2102 jumper 17. RTC jumper 18. User LEDs jumper19. User Keys jumperWhat's on the DVK512 (2)1.Basic operations (4)1.1.System image file programming (4)1.2.Serial debugging environment deploying (4)2.DVK512 and expansion function Demos (6)2.1.Installing the libraries required (6)2.2.LED Demo (7)2.3.Key Demo (7)2.4.8-channel Logic Level Convertor Demo (8)2.5.Joystick Demo (10)2.6.Buzzer and PWM (10)2.7.DS18B20 Demo (10)2.8.Infrared remote control (12)2.9.LCD1602 Demo (13)2.10.PCF8563 RTC Demo (13)2.11.PCF8591 AD Demo (14)2.12.PCF8591 DA Demo (16)2.13.Acceleration of Gravity and Magnetic Sensors LSM303DLHC (17)2.14.Angular rate Sensor L3G4200D (18)2.15.UART Demo (19)2.16.GPS Demo (19)Copy Right (21)Revision History (21)341. 1.1.SYSTEM IMAGE FILE PROGRAMMING1)Run the CD provided with the module. Then, find out the file with the expansion name .img under the directory of IMAGE and copy it to your PC (For the latest system image file, please login the website: /wiki/DVK512 )2) Format your TF card with the SDFormatter.exe.Notices: The capability of TF card in used here should be more than 4GB. In this operation, a TF card reader is also required, which has to be purchased separately.3) Start the Win32DiskImager.exe, and select the system image file copied into your PC, then, clickFigure 1: Programming the system image file with Win32DiskImager.exe1.2.SERIAL DEBUGGING ENVIRONMENT DEPLOYING1)Connect your PC to the UART TO USB interface on DVK512 via a mini USB cable.Notices: The USB part of the UART TO USB interface applied by DVK512 is a mini USB interface, while the one on Raspberry Pi board is a micro USB interface. Please take a note.2) Install the cp2102_driver.3)Start the software PuTTY.exe, and configure the following parameters: ●Serial line: it is used to select corresponding serial port. The serial port in used can be check by Device Manager. ● Speed: 115200 ●Connection type: SerialFigure 2: PuTTY settings4)After the system is started up, you should input following information: User name: pi andPassword: raspberry. Then, you can enter the serial terminal to communicate with the Raspberry Pi.Notices: In this document, the software PuTTY is always used to control the Raspberry Pi via serial port communication, unless otherwise specified. When a serial port is used forRaspberry Pi terminal debugging, it cannot service as a common serial port any more, since it is occupied by system debugging function.52.Before performing any operations described in this section, you should connect DVK512 to RPi with onboard pin headers, unless otherwise specified.2.1.INSTALLING THE LIBRARIES REQUIREDBefore using the DVK512 programs, you shall install the the bcm2835, wiringPi and python libraries to the RPi to add the additional APIs, and configure the settings to start up the core drivers of I2C, SPI and UART after the libraries installed. For more detailed information about the installation and configuration of the RPI library functions, please refer to Libraries Installation for RPi. Of course, we have provided a system image file with the libraries installed as well. In case that you don’t want to reinstall the libraries, you can program this ready-to-use system image file to your Raspberry Pi board. You can find the API source code in the directory /home/pi/DVK512 only if using the ready-to-use system image.Note: Each demo should be run under the corresponding directory, e.g. to use the bcm2835 demo of the LED, execute the command:pi@raspberrypi ~/DVK512/LED/bcm2835 $ sudo ./ledThis means that, you should first enter the path ~/DVK512/LED/bcm2835 than execute the command sudo ./led (./led is a compiled executable file).The sudo means that the command is executed by a super user. The sudo is not required If you log in as a root user, e.g. root@raspberrypi:/home/pi/DVK512/LED/bcm2835# ./ledUnless otherwise specified, the following demos are pre-compiled to executable files which can be run directly. If you intend to compile the C program of bcm2835, wiringPi, sysfs, etc. then please enter the demo directory and execute the command “make” to compile the program while the command “make clean” to remove the executable files. For example:pi@raspberrypi ~/DVK512/LED/bcm2835 $ make cleanrm ledpi@raspberrypi ~/DVK512/LED/bcm2835 $ makegcc -Wall led.c -o led -lbcm2835Python program can be run directly without compilations, e.g.pi@raspberrypi ~/DVK512/LED/python $ sudo python led.py672.2. LED DEMObcm2835 program: 1)Enter the Linux terminal, and run the following commands:pi@raspberrypi ~/DVK512/LED/bcm2835 $ sudo ./led 2)The 4 LEDs will light up one by one. 3)wiringPi program: 1)Enter the Linux terminal, and run the following commands: pi@raspberrypi ~/DVK512/LED/wiringPi $ sudo ./led 2)The 4 LEDs will light up one by one. 3)Python program: 1)Enter the Linux terminal, and run the following commands: pi@raspberrypi ~/DVK512/LED/python $ sudo python led.py 2)The 4 LEDs will light up one by one. 3)shell program: 1)Turn on LED0 by this command:pi@raspberrypi ~/DVK512/LED/shell $ sudo ./LED.sh 26 1 2)Turn off LED0 by this command:pi@raspberrypi ~/DVK512/LED/shell $ sudo ./LED.sh 26 02.3. KEY DEMObcm2835 program: 1)Enter the Linux terminal, and run the following commands: pi@raspberrypi ~/DVK512/KEY/bcm2835 $ sudo ./key 2)The terminal will show whether there is key-press. 3)wiringPi program:81) 在终端输入：pi@raspberrypi ~/DVK512/KEY/bcm2835 $ sudo ./key2)The terminal will show whether there is key-press. 3)Python program: 1)在终端输入：pi@raspberrypi ~/DVK512/KEY/bcm2835 $ sudo ./key 2)The terminal will show whether there is key-press. 3)2.4.8-CHANNEL LOGIC LEVEL CONVERTOR DEMO1)Connect the 8-channel Logic Level Converter to the onboard 8I/Os interface, as Figure 3 shows (Notices: The VCCA pin header on the Logic Level Converter should be connected to the 3V3 pin header of the 8I/Os connector on DVK512).Table 1:. Pin relationships between Logic Level Converter and DVK512Figure 3: The Connection between Logic Level Converter and DVK5122)Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/Logic-Converter/bcm2835 $ sudo ./Logic_ConverterwringPi program:pi@raspberrypi ~/DVK512/Logic-Converter/wiringPi $ sudo ./Logic_Converterpython program:pi@raspberrypi ~/DVK512/Logic-Converter/python $ sudo python Logic_Converter.py9103)Press the KEY0-KEY3 on the DVK512, and the relative LED will light up. 4)2.5.JOYSTICK DEMO1) Connect the Mix Board to the 8I/Os interface.2)Enter the terminal, and execute corresponding commands: bcm2835 program:pi@raspberrypi ~/DVK512/JOYSTICK/bcm2835 $ sudo ./joystick wringPi program:pi@raspberrypi ~/DVK512/JOYSTICK/wiringPi $ sudo ./joystick python program:pi@raspberrypi ~/DVK512/JOYSTICK/python $ sudo python joystick.py3) Press or move the joystick, the terminal will show the action.2.6.BUZZER AND PWM1) Connect the Mix Board to the 8I/Os interface.2)Enter the terminal, and execute corresponding commands: wringPi program:pi@raspberrypi ~/DVK512/Buzzer_PWM/wiringPi $ sudo ./Buzzer python program:pi@raspberrypi ~/DVK512/Buzzer_PWM/python $ sudo python buzzer.py3)The buzzer on the Mix Board will buzz in 4 seconds. 4)2.7.DS18B20 DEMO1)Connect the Mix Board to the 8I/Os interface.2)Insert the DS18B20 to the ON-WIRE interface on Mix Board.Figure 4: Inserting the DS18B20 to the ON-WIRE interface on Mix BoardDangerous: Please make sure the DS18B20 is connected correctly. The DS18B20 in wrongconnection may generate a high temperature more than 100℃which may cause injurieswhen you touch it. The figure shows the correct connection between the DS18B20 and the Mix Board, in which the DS18B20 should be placed according to the shape of the icon shown on the ONE-WIRE interface of Mix Board.3)Enter the terminal, and execute corresponding commands:sysfs program:pi@raspberrypi ~/DVK512/DS18B20/fs $ sudo ./ds18b20python program:pi@raspberrypi ~/DVK512/DS18B20/python $ sudo python ds18b20.py11124) The terminal will display the current temperature information.2.8.INFRARED REMOTE CONTROL 1)Connect the Mix Board to the 8I/Os interface. 2) Connect the infrared receiver to the IRM interface on Mix Board.Figure 5: Connecting the infrared receiver to the IRM interface on Mix BoardNotices: The infrared receiver should be placed according to the shape of the icon shown on the IRM interface of Mix Board.3) Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/IRM/bcm2835 $ sudo ./irmwiringPi program:pi@raspberrypi ~/DVK512/IRM/wiringPi $ sudo ./irmpython program:pi@raspberrypi ~/DVK512/IRM/python $ sudo python irm.py134) Press any key on the infrared remote controller provided by Waveshare. The terminal willdisplay the decoded infrared signal in hexadecimal format.Figure 6: Terminal displays the key pressed on the infrared remote controller5) 2.9.LCD1602 DEMO 1) Insert the LCD1602 into the LCD1602 interface on DVK512.Figure 7: Inserting the LCD1602 into the LCD1602 interface on DVK5122) Enter the Linux terminal, and run the following commands:pi@raspberrypi ~/DVK512/LCD1602 $ sudo ./lcd16023) LCD1602 will display relative information. If there is nothing shown, please adjust thepotentiometer on the LCD1602. The red box in Figure 11 shows the position of thepotentiometer.2.10. PCF8563 RTC DEMO1) Set the jumpers on DVK512:Connect RTC_SDA to SDAConnect RTC_SCL to SCL2)Install i2c-tools:If you have not installed i2c-tools yet, please enter the terminal, and input:root@ raspberrypi:/# apt-get install i2c-tools3)Enter the Linux terminal, and run the following commands:root@ raspberrypi:/# i2cdetect –y 14)Then, you will see the device address of PCF8563 connected to Raspberry Pi module. Here, thedevice address of PCF8563 is 51, indicating that the PCF8563 is detected by Raspberry Pi.Figure 8: PCF8563 is detected by Raspberry Pi B+ module5)Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/PCF8563/bcm2835 $ sudo ./pcf8563wiringPi program:pi@raspberrypi ~/DVK512/PCF8563/wiringPi $ sudo ./pcf8563python program:pi@raspberrypi ~/DVK512/PCF8563/python $ sudo ./pcf8563.pyTime of PCF8563 will be shown on the terminal.2.11.PCF8591 AD DEMO1)Connect the PCF8591 module to the I2C interface on DVK512.142)Connect the pins AIN0 and AD0 on the PCF8591 together via a cable.Figure 9: Connecting the pins AIN0 and AD0 together3)Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/PCF8591/ADC/bcm2835 $ sudo ./pcf8591wiringPi program:pi@raspberrypi ~/DVK512/PCF8591/ADC/wiringPi $ sudo ./pcf8591python program:pi@raspberrypi ~/DVK512/PCF8591/ADC/python $ sudo python pcf8591.py4)The terminal will display the AD values read from ADC0-ADC3 (corresponding to the pinsAIN0-AIN3 on PCF8591).1516 Figure 10: Displaying the AD values read from ADC0-ADC32.12.PCF8591 DA DEMO1)Connect the PCF8591 module to the I2C interface on DVK512. 2) Connect the Pin AOUT on PCF8591 to the LED pin header on DVK512.Figure 11: Connecting the Pin AOUT on PCF8591 to the LED pin header on DVK5123) Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/PCF8591/DAC/bcm2835 $ sudo ./pcf8591wiringPi program:pi@raspberrypi ~/DVK512/PCF8591/DAC/wiringPi $ sudo ./pcf8591python program:pi@raspberrypi ~/DVK512/PCF8591/DAC/python $ sudo python pcf8591.py4)The digital conversion value is displayed in the terminal. And the brightness of the LED indicatoron DVK512 will change with the level variation on the pin AOUT.2.13.ACCELERATION OF GRAVITY AND MAGNETIC SENSORS LSM303DLHC1)Connect the LSM303DLHC module to the I2C interface on DVK512.Figure 12: Connecting the LSM303DLHC module to the I2C interface on DVK51217Notices: LSM303DLHC module has two rows of pins, and the one connected to DVK512contains the pins SDA and SCL.2)Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/LSM303DLHC/bcm2835 $ sudo ./LSM303DLHCwiringPi program:pi@raspberrypi ~/DVK512/LSM303DLHC/wiringPi $ sudo ./LSM303DLHCpython program:pi@raspberrypi ~/DVK512/LSM303DLHC/python $ sudo python LSM303DLHC.py3)The terminal will display the relative values read from acceleration of gravity and magneticsensor.Figure 13: Relative values read from acceleration of gravity and magnetic sensor2.14.ANGULAR RATE SENSOR L3G4200D1)Connect the L3G4200D to the SPI interface on DVK512.2)Enter the terminal, and execute corresponding commands:bcm2835 program:pi@raspberrypi ~/DVK512/L3G4200D/bcm2835 $ sudo ./L3G4200DwiringPi program:pi@raspberrypi ~/DVK512/L3G4200D/wiringPi $ sudo ./L3G4200Dpython program:pi@raspberrypi ~/DVK512/L3G4200D/python $ sudo python L3G4200D.py3)The terminal will display the angular velocity values in three factors of x axis, y axis and z axis,respectively.1819 Figure 14: Angular velocity values 2.15. UART DEMONote: The Serial Port of Raspberry pi is used for terminal debugging by default, so for using UART function, the Serial terminal debugging function needs to be closed.1)Connect the onboard UART TO USB port to a PC via a mini USB cable. 2) Enter the terminal, and execute corresponding commands:wiringPi program:pi@raspberrypi ~/DVK512/UART/wiringPi $ sudo ./UARTpython program:pi@raspberrypi ~/DVK512/UART/python $ sudo ./uart.py3) Run Serial monitor software, choose a corresponding COM port and set the baud rate as 115200.The field sent by the software will be sent back and shown on the software.2.16. GPS DEMO 1)In the default boot mode of the system image provided by Waveshare, the serial port works asterminal debugging output. In order to control peripherals via serial port communication, you should input corresponding commands on the terminal to disable the debugging function of the serial port.sudo raspi-configChoose Advanced Options -> Serial –>no to disable the debugging function of the serial port. Once the debugging function of the serial port is disabled, you cannot access the Pi using Serial port but you can re-enable the debugging function by raspi-config.2) Insert a GPS module into the UART interface on DVK512, and remove the jumper wire fromUART JMP.Figure 15: Removing the jumper wire from UART JMP for GPS Demo3)Enter the terminal, and input the following commands to set the Baud rate (The Baud rate willbe restored to the default value: 115200, after the system rebooted).root@raspberrypi:/# stty -F /dev/ttyAMA0 38400root@raspberrypi:/# gpsd /dev/ttyAMA0 -F /var/run/gpsd.sock4)Enter the terminal and input the following command to open the GPS software provided by theLinux system:root@raspberrypi:/# cgps -s5)The terminal will display relative GPS position information.Figure 16: GPS position information20DVK512 Expansion Board User ManualAll rights reserved by Waveshare Electronics Co., Ltd.Not allow to modify, distribute, or copy without permission.21。

Honeywell 30系列微SD卡WDR 5 MP IR 球形 Camera 说明书

46HC30WB5R2 30 SeriesWDR 5 MP IR Bullet Camerax1M2.5×8+1 800 323 4576 (North America only)Document 800-25042 – Rev A – 05/2019© 2019 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assumeresponsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes. For patent information, see /patent ./securityWARNING Cautions and WarningsTo ensure compliance with electrical safety standards, CSA Certiﬁed/UL Listed LPS or Class 2 power adapters are required. Power over Ethernet (PoE) shall be provided by listed InformationTechnology Equipment meeting the IEEE 802.3af PoE standard. The PoE is not intended to be connected to exposed (outside plant) networks.THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OFELECTRIC SHOCK IS PRESENT WITHIN THE UNIT.THIS SYMBOL INDICATES THAT IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS ACCOMPANY THIS UNIT.CAUTION: TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICEPERSONNEL.HoneywellManufacturer's Declaration of ConformanceWaste Electrical and Electronic Equipment (WEEE)The manufacturer declares that the equipment supplied with this guide is compliant with the European Parliament and Council Directive on the Restrictions of the use of certain hazardous substances in electrical and electronic equipment (2011/65/EU), General Product Safety Directive (2001/95/EC), and the essential requirements of the EMC Directive (2014/30/EU), conforming to the requirements of standards EN 55032 for emissions, EN 50130-4 for immunity, and EN 62368-1 for electrical equipment safety.Correct Disposal of this Product (applicable in the European Union and other European countries with separate collection systems).This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.Important SafeguardsRead and keep these instructions.Please ensure that your installation area can safely support the weight of the camera.Do not aim the camera toward a bright light source for extended periods to preventdamage to the imager. Avoid operating the unit under or close to unstable light sources (may cause ﬂickering), or close to ﬂuorescent lamps or objects reﬂecting light.Do not touch the camera lens.Do not drop the camera or subject it to physical shock.Do not use a strong or abrasive detergent when cleaning the camera.Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,where the operating temperature is outside the recommended range of -22°F to 140°F (-30°C to 60°C).Avoid operating the unit close to sources of powerful electromagnetic radiation, such as radio or TV transmitters.If powered by a power adapter, the adapter should be properly grounded.Consult Honeywell for the recommended adapter or check it in Honeywell DOC.Regulatory StatementsFCC Statement of ComplianceInformation to the User: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.Note Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Logging On to the CameraIf logging on the camera remotely from a PC, install the Honeywell Conﬁg Tool from the software and documentation CD, ﬁnd the camera on the network, and then open the web browser with the Honeywell Conﬁg Tool. The default user name is admin (case-sensitive) and the default password is 1234.NoteInternet Explorer 11 (or later) with ActiveX plug-in is supported.Chrome 71 (or later) is supported for H.264 video. Chrome is not supported for H.265 video.IP address of the device is assigned automatically by DHCP server. If the DHCP server is not available, the device will acquire 192.168.1.108 as the default IP address.Adjusting the Zoom and Focus SettingsAfter you have logged on to the camera, go to Camera Setup → Properties → Focusto ﬁne-tune the camera’s zoom and focus settings.HC30WB5R2Support BracketsHBS2-BBJunction Box Pole MountHQA-PM2 with HBS2-BB。

W5500中文版数据手册V1.3

3 寄存器和内存构成 Register and Memory Organization .............................2 3.1 通用寄存器区 Common Register Block ........................................2 3.2 Socket 寄存器区 Socket Register Block .....................................2 3.3 内存 Memory ..............................................................3
2 主机接口.....................................................................8 2.1 SPI 工作模式 .............................................................9 2.2 SPI 数据帧 ...............................................................2 2.2.1 地址段 ............................................................2 2.2.2 控制段 ............................................................3 2.2.3 数据段 ............................................................5 2.3 可变数据长度模式（VDM）Variable Length Data Mode (VDM).....................2 2.3.1 写访问—VDM 模式 ...................................................2 2.3.2 读访问—VDM 模式 ...................................................2 2.4 固定数据长度模式（FDM）Fixed Length Data Mode (FDM) .......................2 2.4.1 写访问—FDM 模式 Write Access in FDM ................................2 2.4.2 读访问—FDM 模式 Read Access in FDM .................................2

计算机常见软硬件英汉对照表

计算机常见软硬件英汉对照表计算机常见软硬件英汉对照表计算机常见软硬件英汉对照表IEEE 1394---火线 Firewire（IEEE-1394是在Windows 98SE/2000/XP所支持的一种新标准的接口,其现有速率可达400Mbps,可显著提高多媒体视讯设备的传输速度,例如数码摄影机，扫描仪,打印机等等。

IEEE 1394最多可连接63项设备，并且发挥它高频宽的特色，数码摄影机，扫描仪，打印机可同时接于PC，而且提供热插拔的功能，可以随意增加或移除其它设备，而不必关闭计算机。

）Acer--> 宏基公司A/D--> 模拟/数据Address bus--> 地址总线ALT=Alternate--> 转换键/更改/更动ALT=Alteration Switch--> 转换开关AMD=Advanced Micro Devices Inc. --> 超微半导体设备公司AMI=American Megatrends Inc. --> 美国米格特雷德公司AGP=Accelerated Graphics Port --> 图形加速端口API=Application Program Interface --> 应用程序接口APM=Advanced Power Driver --> 高级动力驱动器ASCII=American Standard Code for Information Interchange 美国信息交换用标准码BIN --> 收集器/二进制BIOS=Basic Input/Output System --> 基本输入输出系统Bit --> 位Block --> 模块BS=Backspace --> 退格键BSB=Back Speed Bus---->后端总线Cache --> 高速缓存CD=Compact Disc --> 致密盘，光盘CGA=Colour Graphic Adapter --> 彩色图形显示器CHCP=Display The Active Code Page Number --> 显示活动模式页码数Chips --> 芯片Clock Freq 时钟频率CMOS=Complementary Metal-Oxide-Semiconductor --> 互补型金属氧化物半导体CN=Connector --> 连接器Columns --> 列Com=Concatenation of Merge Way--> 串行口Control lines --> 控制线Controller --> 控制器Copyright --> 版权CPU=Central Processing Unit --> 中央处理器CRT=Circuits --> 电路CRT=Cathode Ray Tube --> 阴极射线管CTRL=Control --> 控制/控制键Cylinder --> 磁柱面Cyrix--->西列克斯公司DAta Bus --->数据总线Daughterboard--->子板3 -Ds= 3-Dimension studio --->三维绘图工作室DEL=Delete --->删除键DHCP=Dynamic Handle Configrue Processor--->动态配置处理器DM=Disk Manager --->磁盘管理器DMA=Direct Memory Access --->存储器直接存取（访问）DOT=Device Operating Terminal--->设备操作终端DPMI=Data Processing Memory Information--->数据处理内存信息DRAM=Dynamic Random-Access Memory--->动态随机存储器DRV=Drive --->驱动器DSP=Digital Signal Processor --->数字信号处理器EGA=Enhanced Graphic Adapter--->增强型图形显示器EMM=Expanded Memory Management--->扩展内存管理EMS=Expanded Memory System --->扩展内存系统EMS=Expanded Memory Specification --->扩展内存规范Encoded Keyboard --->编码键盘EROM=Erasable Read Only Memory--->可擦除只读存储器ESC=Escape --->退出键/退出系统ESDI=Enhanced Small Device Interface--->增强型小型设备界面（接口）FSB=Front Speed Bus---->前端总线FDD=Floppy Disk Drive --->软驱FPU=Floating Point Unit --->浮点处理器（数学协处理器）GB=Gigabyte --->千兆字节Gold Finger--->金插脚Hard Disk----->硬盘HDD=Hard Disk Light-emitting diode--->硬盘指示灯（发光二极管）Head--->磁头HPM=Hyper-Page-Mode--->超页模式IBM=International Business Machines Corporation--->国际商业机器公司ID=Identifier--->标识符ID=Inside Diameter--->内径IDE=Insede Diameter Enhanced--->内部直径增强接口(它的.本意是指把控制器与盘体集成在一起的硬盘驱动器，我们常说的IDE接口，也叫ATA （Advanced Technology ttachment）接口INS=Insert--->插入行/插入键Intel--->英特尔公司Interleave--->交叉（存取）因子Intersections--->内部结点。

理光wg5说明书

理光WG5说明书一、产品概述理光WG5是一款功能强大的数码相机，具有出色的防水性能和高画质拍摄能力。

它采用了先进的技术和设计，让用户可以在各种恶劣环境下自由拍摄，记录珍贵的瞬间。

二、主要特点1.防水性能：理光WG5具有IPX8级别的防水性能，可在30米深的水下使用，让您尽情畅游水下世界并拍摄精彩瞬间。

2.抗震性能：相机具有抗震等级为MIL-STD 810F的能力，可以承受摔落、振动等意外情况而不受损。

3.高画质拍摄：相机配备1600万像素CMOS传感器和4倍光学变焦镜头，可捕捉细节丰富、清晰锐利的照片和高清视频。

4.全景模式：支持全景模式拍摄，将广阔的风景完整呈现在一张照片中。

5.快速连拍：相机具备快速连拍功能，在高速运动中也能捕捉到每一个精彩瞬间。

6.GPS功能：相机内置GPS模块，可以记录拍摄地点的经纬度信息，方便用户回忆和整理照片。

三、系统要求1.操作系统：Windows 7/8/10或Mac OS X 10.5以上版本。

2.存储卡：支持SD卡、SDHC卡和SDXC卡。

3.连接接口：USB 2.0接口，用于相机与电脑的数据传输。

四、使用方法1.开启相机：按下电源开关，等待相机启动。

2.拍摄照片：通过取景器或LCD屏幕确认拍摄画面，按下快门按钮进行拍摄。

3.录制视频：在拍摄模式中选择视频模式，按下录制按钮开始录制视频，再次按下停止按钮结束录制。

4.调整设置：通过菜单按钮进入设置界面，可以调整相机的各项参数，如ISO感光度、白平衡、曝光补偿等。

5.数据传输：使用USB数据线将相机连接到电脑上，在电脑上会自动识别并打开存储设备，可以将照片和视频复制到电脑上进行后续处理。

五、常见问题解答1. 如何保养相机？答：使用后应及时清洁相机外壳和镜头，避免灰尘和污渍影响画质。

在使用过程中，应避免将相机长时间暴露在高温、潮湿或强烈阳光下。

2. 相机不能开机怎么办？答：首先检查电池是否已经安装正确，并且电量是否足够。

液晶屏幕知识

XGA——Extended Graphics Array：这是一种目前笔记本普遍采用的一种LCD屏幕，市面上将近有80%的笔记本采用了这种产品。它支持最大1024×768分辨率，屏幕大小从10.4英寸、12.1英寸、13.3英寸到14.1英寸、15.1英寸都有。
SXGA+——Super Extended Graphics Array：作为SXGA的一种扩展SXGA+是一种专门为笔记本设计的屏幕。其显示分辨率为1400×1050。由于笔记本LCD屏幕的水平与垂直点距不同于普通桌面LCD，所以其显示的精度要比普通17英寸的桌面LCD高出不少。
[DSTN（double-layer super-twisted nematic即双层STN ，过去主要应用在一些笔记本电脑上。也是一种无源显示技术，使用两个显示层，这种显示技术解决了传统STN显示器中的漂移问题,而且由于DSTN还采用了双扫描技术，因而显示效果较STN 有大幅度的提高。由于DSTN分上下两屏同时扫描，所以在使用中有可能在显示屏中央出现一条亮线。
240x176 Sub-QVGA+
液晶屏幕知识及QQVGA、QVGA、VGA、XGA、WXGA、WUXGA和WSXGA+的含义
TFT屏幕
TFT ( Thin Film Transistor 薄膜晶体管) ，是有源矩阵类型液晶显示器(AM-LCD)中的一种，TFT在液晶的背部设置特殊光管，可以“主动的”对屏幕上的各个独立的象素进行控制，这也就是所谓的主动矩阵TFT（aCTive matrix TFT）的来历，这样可以大大的提高反应时间，一般TFT的反映时间比较快约80ms，而STN则为200ms如果要提高就会有闪烁现象发生。而且由于TFT是主动式矩阵LCD可让液晶的排列方式具有记忆性，不会在电流消失后马上恢复原状。TFT还改善了STN 会闪烁（水波纹）-模糊的现象,有效的提高了播放动态画面的能力。和STN相比TFT有出色的色彩饱和度、还原能力和更高的对比度，但是缺点就是比较耗电，而且成本也比较高。

外文翻译--ISD25120录放音芯片介绍

The introduce of sound playback chip ISD251201 ISD 2500 series chip ProfileISD's 2500 series chips, according to recording time 60 seconds, 75 seconds, 90 seconds and 120 seconds into ISD2560, 2575,2590 and 25120 four models. ISD device with OVF (overflow) client for cascading multiple devices.ISD2500 series EEPROM with capacity for 480K, up to sub-paragraph 600. Four different types of recording time depends on different input sampling rate to achieve, and they were: 8.0,6.4,5.3,4.0 kHz.DIP package 28-pin devices, the pin function as follows:1 ~ 7 A0/M0 ~ A6/M6 address / mode selection8 ~ 10 A7 ~ A9 enter an address line11 AUX IN input12,13 VSSD, VSSA and analog to digital14,15 SP +, SP-speaker output16 VCCA power analog signal positive17,18 MIC, MIC REFMicrophone input and the input reference terminal19 AGC AGC20,21 ANA IN, ANA OUTAnalog signal input and outputSpillage 22 OUF23 CE chip select (low to allow the chip work)24 PD-chip low-power state control25 EOM an end audio playback signal output26 XCLK external clock27 P / R recorded / release control to choose28 VCCD cathode power supply digital signal2 Working Principle2500 Series 10 input address A0 ~ A9, the site recorded up to 1024, address space is 0 ~ 1023. Its distribution is: Address 0 ~ 299 as a sub, and did not address the use of 600 ~ 767, 768 ~ 1023 for the address mode selection (ie, A8, A9 are high). Address Line 2500 series has two purposes, first as a mode of control, the second sub-recording sound as the start segment address. When the highest address bit (MSB)A8, A9 are high (ie address 768 ~ 1023), the address A0 ~ A6-side as a working model on the choice of client M0 ~ M6, corresponding to seven kinds of work. When the A8, A9 or any one for the low low (that is, address 0 ~ 599), as long as recorded in the sub / playback pre-operation (less than 300ns) to the address A0 ~ A9 assignment operation from the Address to start.2500 series of voice chips will be divided into 480K of EEPROM information in paragraph 600, 800 bytes each. Unit as a whole, addressing and control information to each paragraph should be assigned an address for the external control rather than for each byte addressing, or at least address port 19. This greatly reduces the information needed to retrieve the address line. Of the speech signal can be a long cross-section of a number of information recording, storage information from the section of the internal constraints, and information within the site will automatically increase the segment. Each voice in the automatic increase in the tail section of an end mark EOM, when the combination of playing, by detecting EOM to control the end of the voice segment and the beginning of the next section.Information section of each audio playback time equal to the total time divided by 600. ISD2560, such as the total time for the 60s, the information section of each audio playback time of 100ms; ISD25120 the total time for the 120s, each time for paragraph information 200ms. Therefore the length of time can be used as a segment address, through the time-parallel single-chip timer to the address above mapping information in order to get the start address of each recording. In this way, on the need to set up an address counter. General address from 0 to start recording, first of all, through the CPU assigned to it A0 ~ A9, then start recording ISD SCM, SCM to start the timer at the same time the beginning of time, every time an information paragraph, give the address count plus 1. ISD single-chip control when to stop recording at the same time stop the timer time. At this point the value of address counter is the voice of the paragraph did not address, plus 1 under the section of speech is the first address, and EEPROM in its existence, will be playing for the next address information provided. Through the CPU assigned to the address A0 ~ A9, under the section of your voice recording. Followed it, you can record voice above all at the same time be the starting address of the paragraphs. If it is not started from 0 voice above address, simply assign the initial address A0 ~ A9, with the value of address counter can be a voice at the end of the address above. Not here at the same time to preserve the voice segment start address and end address, because it is adjacent to each paragraph, beforeparagraph 1 at the end of the address that is the starting address of this paragraph, and each have a voice at the end of paragraph mark EOM may give a disruption. Use it when playing and stored in the EEPROM in the initial paragraph of the speech address in any order combination of voice above all.ISD25120录放音芯片介绍1 ISD 2500系列芯片简介ISD公司的2500系列芯片，按录放时间60秒、75秒、90秒和120秒分成ISD2560、2575、2590和25120四个型号。

MEAN WELL NTS NTU系列纯正弧波DC-AC转换器产品说明书

DC-AC Pure Sine Wave InverterNTS/NTU SeriesFrank Chen｜Product Manger｜Product Strategy Center ******************TypeAppearanceSeriesWarrantySine WaveTSseries DC-AC200/400/700/1000/1500/3000WTN series DC-AC+ Charger +UPS1500/3000W3YearsNTS series DC-AC250/300/400/450/750/1200/1700/2200/3200WNTU series DC-AC + UPS1200/1700/2200/3200WSquare waveA301/A302 series DC-AC100/150/300/600/1000/1700/2500W1YearInverter Product Category(Under development for 1700~3200W)200 300 400 500700 1000 12001500 1700 22003200WattTS-200 / 400 / 700 / 1000 / 1500 / 3000TN -1500 / 3000Ture Sine Wave with AC and Solar ChargerStandard-alone Ture Sine WaveIRC-1/2/3Remote ControllerNTS-300 / 450 / 750 / 1200 / 1700 / 2200 / 3200Built-in type Ture Sine WaveNT U -1200 / 1700 / 2200 / 3200True Sine Wave Inverter RoadmapNTS-250P / 400PStandard-alone Ture Sine Wave with UPSStandard-alone Ture Sine Wave (Under development for 1700~3200W)O l d G e n .N e w G e n .NTS/NTU Series Selection TableInstallationtypeSeriesOutput Power DC Input Voltage AC Output VoltageBuilt-inFanUPSDimension (mm)Built-in type (PCB type)NTS-250P 250W 10 ~ 16.5Vdc 20 ~ 33Vdc 40 ~ 66Vdc100/110/115/120Vac 200/220/230/240Vac (Adjustable output by DIP SW)186*100.5*32NTS-400P450W 186*100.5*32External typeNTS-300300W 210*130*55NTS-450450W 210*130*55NTS-750750W 270*158*67NTS-12001200W 333*184*67NTS-17001700W 400*184*67NTS-22002200W 400*270*98NTS-32003200W 440*270*98NT U -12001200W 333*184*67NT U -17001700W 400*184*67NT U -22002200W 400*270*98NT U -32003200W440*270*98Key Features●Product Family: NTS-250P / 400PNTS-300/450/750/1200/1700/2200/3200NTU-1200/1700/2200/3200●200% peak power capability ●THD < 3%●Selectable AC output voltage by DIP SW (100/110/115/120Vac or 200/220/230/240Vac)●Selectable AC output frequency by DIP SW (50HZ or 60HZ)●No-load power consumption <1.5W max. in power saving mode ●Fanless design ( NTS-250P/400P/300)●Built-in intelligent temperature control cooling fan(NTS-450~3200/NTU-1200~3200)●Multi-intelligent protections (Automatic shutdown when abnormal) :DC input-Reverse polarity/Bat. low alarm/Bat. low shutdown/Over voltage AC output -Short circuit/Overload/Over temp.●-25~+70℃ working temperature●Remote controller–IRC1 / IRC2 / IRC3 (NTS-750~3200/NTU-1200~3200 applicable)●Pull handle optional accessory●Built-in UPS function ( NT U -1200~3200)●Comply with international certification ,safety is guaranteed ●Suitable for lead-acid or li-ion batteries ●3years warrantyIRCNTS/NTUNTS/NTU Inverter -3Key FeaturesOff-the-shelfSafeDurable•Intelligent protection •Global Certification•Off-the-shelf product •Sales channel over the World•High-quality components •3years warrantyNTS/NTU Series–6OptimizationsSizeminiaturizationPackaging upgrade Specification upgradeUser friendly Affordable PriceSupport varietyof socketsPackaging Upgrade(1)-Eco F riendlyOld Gen. —TS SeriesNew Gen . —NTS/NTU SeriesPolyethylene(EPE)Ink (toluene, xylene)Pa per PulpInk freePackaging Upgrade(2)-User FriendlyOld Gen. —TS Series New Gen. —NTS/NTU SeriesSize MiniaturizationOld Gen. —TS Series New Gen. —NTS/NTU SeriesOld Gen.Series DimensionNA NATS-200205*158*59TS-400205*158*67TS-700295*184*70TS-1000345*184*70TS-1500420*220*88NA NATS-3000466.8*283.5*100New Gen.Reducedsize(%)Series DimensionNTS-250P/400P186*100.5*32NANTS-300210*130*55-21%NTS-450210*130*55-31%NTS-750270*158*67-25%NTS/NTU-1200333*184*700%NTS/NTU-1700400*184*70-37%NTS/NTU-2200400*270*98NANTS/NTU-3200440*270*98-12%Specification UpgradeOld Gen.-TS SeriesNew Gen.-NTS/NTU SeriesOutput PowerBuilt-in type:N/ AStand alone:200/400/700/1000/1500/3000WBuilt-in type:250/400W Stand-alone type:300/450/750/1200/1700/2200/3200WOutput Voltage 10.5~ 15Vdc 21~ 30Vdc 42 ~ 60Vdc 10~16.5Vdc 20~33Vdc 40~66Vdc No-load power consumption 6~15W (by model)In power saving mode 1.2~1.5W (by model) in power saving mode Efficiency 84.5~92% 89~93% Working Temp.0~+60℃-25~+70℃R.Conly 200/400W250~3200W whole product familyMulti-intelligent protections Input:Reverse polarity/DC low alarm/OvervoltageOutput :Short circuit/Overload/Over temp.Input:Reverse polarity/DC low alarm/Overvoltage/Battery over dischargeOutput :Short circuit/Overload/Over munication NA (250W/400W Built-in, Optional for other models)UPSNA(NTU Series only)Safety ApprovalsOperation Interface-User FriendlyOld Gen.-TS Series New Gen.-NTS/NTU SeriesSupport Variety of Sockets &No MOQOld Gen.-TS SeriesNew Gen.-NTS/NTUSeriesType-U.S.Type-EUType-U.S .Type-EUType-CNType=Uni.Other Optimizations–Pull Handle(Optional)Old Gen.-TS Series New Gen.-NTS/NTU SeriesNo pull handle With pull handle design,more convenient to carryOther Optimizations-Label、ManualOld Gen.-TS Series New Gen.-NTS/NTU SeriesNTU Series-Built UPSFunction⏹When AC grid is normal: AC by-pass supply power to the load directly ⏹When AC gird fails: the battery converts AC power to the loadACDCNTU Series UPS Application –Alternate Power Supply in Districts (Example)A CityAC grid is normal , AC by-pass Inverter to supply powerB CityAC power failure, Inverter DC→ACto supply power•Mobile medical carts / Ambulances /Gardening vehicle/Camping vehicles/Refrigerated vehicles•Off-grid equipment:Industrial-grade vacuum, forklift•Mobile power bank•Power supply in countries and regions withunstable power grids•Office、Home backup power•Fire protection facility backup•Communication equipment backup•Elevator safety backup Application18 No AC Grid-Mobile AC Power SupplyWith AC Grid-UPS Backup Power SupplyCommon Load您信賴的電源夥伴。