精细电子板-规格书说明书

GENERAL SPECIFICATIONS
Panel Size:
•Standard: Up to 12" x 18" (304,8mm x 457,2mm)•Larger By Request
Drilled Hole Size/Location:
•Non-Plated Thru Holes: .008" (0,20mm) minimum •Plated Through Holes: .008" (0,20mm) minimum •Hole-to-Hole: +/- .003" (0,08mm)
Line Width/Spaces:
•Line: ≥.003" (0,08mm)•Spaces: ≥.003" (0,08mm)
Layers:
•4 Layers Maximum
•Solid and Cross-Hatched Etched Copper Shielding •Silk Screened Silver Conductive Epoxy •
Pads Only Plating on Plated Layer
Base Materials:
•Polyimide: .0005" to .005" (0,013mm – 0,127mm)
•All clads incorporate Flame Retardant Adhesive unless otherwise specified; Adhesiveless: By Request (Additional Lead Time Required)
•UL rated 94V-O
Conductors:
•1/2 oz. Copper .0007" (0,018mm) thickness •1 oz. Copper .0014" (0,036mm) thickness •2 oz. Copper .0028" (0,071mm) thickness
Stiffeners:
•G10/FR4•Polyimide
•Other Materials: By Request
Surface Finishes:
•Tin Plating
•Hard Gold over Nickel Plating •Nickel Plating
•Hot Air Solder Level (HASL)
Solder Masks:
•Liquid Photo-Imagable •Dry Film Photo-Imagable
•Polyimide .0005" to .005" (0,013mm to 0,127mm)•
Adhesive .001" to .002" (0,025mm to 0,051mm)
Signal Integrity Design Analysis
Breakouts
Fold Lines Copper Stiffener
SMT Pads, Vias
Plated
Through-Hole
High
Temperature Applications
Skyscrapers
Stiffeners
Pitch
Translators
Daisy Chain
Other component placement Eliminate traditional cables
Superior signal integrity versus traditional pin and socket connectors for boards that are far apart
Eliminate extra PCBs
Thousands of “connectorizing”options
Complete system capability
Fold to fit application
Ability to fold and flex
Light weight
Complex single-sided
Termination with controlled impedance (Q-Strip TM ) connectors
Solid copper and cross-hatched copper shielding
CUSTOM FLEX
FLEX CIRCUIT CAPABILITIES
CONSTRUCTION OPTIONS
•Complex Single-Sided
•Double Sided & Multi-Layer •Rigid-Flex (coming soon)
END-TO-END SOLUTIONS
•Flex Circuit design and manufacturing •Thousands of standard connector termination options
•Designs for hot bar or ZIF/LIF termination to the board
•Custom connector terminations
SIGNAL INTEGRITY
•In-house Signal Integrity Services for optimum design of conductor routing and terminations
•Full Line of high speed connector termination options
•Custom system analysis capability from flex circuit and terminations to complete subsystems or small systems
SUDDEN CIRCUITS
•Unique combination of construction options
•Signal integrity design and analysis •End-to-end solutions combined with Samtec Sudden Service
MINI EDGE CARD
(MEJ1 Series – page 13)
•Double-Sided card interface for mating with mini edge card connectors on 1mm pitch
•Choice of vertical,horizontal and edge
mount mating connectors •Easy customization of cable
lengths, pin counts, polarization, etc.•For complete specifications see ?MEJ1HIGH SPEED
(HFEM Series – page 8)
•Terminate with Single-Ended or Differential Pair High Speed connectors
•Controlled Impedance Shielded Flex Cable
•Wide choice of mating connectors on 0,8mm pitch •Easy customization of cable lengths, pin counts,guide posts, connector heights, etc.•For complete specifications see ?HFEM
Shielded Flex Circuit
TFMDL
High Speed Connector
Standard and Modified Standards
HIGH DENSITY/HIGH RELIABILITY
(YFTDL Series – page 9)
•High reliability Tiger Eye Contacts •Mate High Density connectors with minimal skew and alignment concerns •Target connectors on boards soldered with conventional BGA processes
•Modify for other pins or cable lengths •For complete specifications see ?YFTDL
TIGER EYE CONNECTOR SETS
(TFMDL Series – page 11)
•High reliability Tiger Eye contacts •Choice of standard or friction lock sockets
•
Easy customization of cable lengths,pin counts, etc.
•For complete specifications see ?TFMDL
EDGE MOUNT
(BTHDL Series – page 12)
•Micro 0,5mm pitch
•“Flexible” edge mount design •2 x 50 mates with Agilent Logic Analyzers
•For complete specifications see ?BTHDL
HIGH DENSITY COMPRESSION
(GFZDL Series – page 10)
•Ideal for test probes or other temporary connections •Test boards without traditional connector
•Controlled impedance flex routing •For complete specifications see ?GFZDL
High Speed High Density
GFZDL
1mm pitch
MEJ1
MEC1
TM
BTHDL
HFEM
YFTDL
ZF5, ZF1or FC1
FJ or FJH
(1,27mm).050" pitch
ZIF FLEX JUMPERS
(FJ and FJH Series – pages 14 - 18)•1mm and 0,5mm pitch
•Standard pin counts and lengths available from stock •Easily modified for custom pin counts and lengths •Mating ZIF (ZF1 and ZF5 Series) and standard (FC1Series) sockets for Samtec jumpers or other Flat Flex Cable (FFC) and Flexible Printed Circuit (FPC)
Vertical, Right Angle
& Edge Mount
CONTACT
TM
ST ANDARD DA T A LINKS
High Speed High Density
FLEX TO BOARD
•Hot bar selectively reflows solder
around leads without affecting other
components on the board
•Suitable for unsupported fingers on
the flex or through the back-side of
the flex
•Proven technology with choice of
equipment suppliers CONNECTORIZED
•Wide variety of sockets
and headers reflow
soldered to flex
•Stiffener design and selective
placement for rigidity/strength
without losing inherent benefits of
flex
•Long track record of reliable
performance with traditional Samtec
pin & socket connectors
ZIF/LIF/EDGE CARD
•ZIF and LIF connectors mate with flex
supported by thin stiffeners in the finger
area
•1mm and 0,5mm finger pitch
•1mm pitch Edge Card connectors
available in vertical, right angle and edge
mount designs Unsupported “Discreet”Fingers
TERMINA
TION OPTIONS
SUDDEN SAMPLES
STANDARDS
• Samples shipped within 24 hours of order • No NRE for standard products
CUSTOMS & MODIFIED STANDARDS
• 24 hour quote turnaround
• Reviewable electronic data available in 24 – 48 hours
• Samples after design/layout approval
• $750 NRE for modifications to standard products
• $1500 NRE for customs
• NRE/Sample charge may be refundable based on application
Contact the Samtec Flex Circuits™ Group at 1-800-SAMTEC9 (+1-812-944-6733) or E-mail us at ***********************
SUDDEN SERVICE
• Ranked Number 1 in Customer Service for seven
consecutive years by Bishop & Associates Survey of the Electronic Connector Industry • Real time customer specific web sites for 24/7 pricing, delivery,order status, quote inquiry, order entry and expediting • In-house electrical test lab and engineering staff to field questions and make recommendations on High Speed interface applications • EDI capabilities with an integrated system shared by all facilities worldwide • Customer Service and sales offices in USA, Scotland,Singapore, France, Germany, Italy, China, Taiwan, Hong Kong and Japan for local responsiveness in local languages and currencies • ISO 9001 and QS 9000 certified • Member of:
ASSOCIATION CONNECTING
ELECTRONICS INDUSTRIES
ST ANDARD PRODUCTS
High Speed Data Links
HFEM Series
High Density Data Links
YFTDL Series
Test Point Data Links
GFZDL Series
Micro Tiger Eye Data Links
TFMDL Series
Edge Mount Data Links
BTHDL Series
1mm Flex Jumper System
MEJ1 Series Jumper FJ Series Jumper
ZF1 Series ZIF Flex Socket FC1 Series LIF Flex Socket
0,5mm Flex Jumper Series
FJH Series Jumper
ZF5 Series ZIF Flex Socket
Signal Integrity Services
Signal Integrity Center Signal Integrity Group
SIGNAL INTEGRITY SERVICES
INTEGRATED SERVICES FOR SELECTION, DEVELOPMENT, SIMULATION AND TESTING OF HIGH SPEED SYSTEMS
Design Considerations
•Prints
•Recommended PCB Footprints •Catalog Pages •Material
Specifications
•Processing Guidelines •Order Samples On-line
Product Search
•By Frequency •By Rise Time •By Data Rate •By Description •By Series
•
By Board Spacing
Simulations
•SPICE, IBIS odels •S-parameter data •Isolated mating connector sets and connectors on optimized PCB layouts
T est Reports
•High Speed characterization •Time & Frequency Domain test data
•Mechanical test data
•Isolated mating connector sets and connectors on optimized PCB layouts
For questions on applications that cannot be obtained from the Signal Integrity Center, Samtec’s Signal Integrity Group offers person-to-person SI engineering support.
•EE customer interface •In-house staff
•Interpret test data, performance results, capabilities •
PCB layout, trace & routing assistance
•Connector ground pin assignment assistance •Call 1-800-726-8329 or
+812-944-6733 extension 2330•North American & China facilities • E-mail: ************** or
*******************************
SIGNAL INTEGRITY GROUP
Signal Integrity Engineering Support
SIGNAL INTEGRITY CENTER
/signal_integrity/index.asp A comprehensive, user friendly web site for
high-speed connector models, reports, drawings and searches
Samtec Sudden Service: Information • Samples •Delivery
SAMTEC USA
P.O. Box 1147
New Albany, IN 47151-1147 USA
1-800-SAMTEC-9 (USA & Canada)
Tel: 812-944-6733 • Fax: 812-948-5047
E-mail:***************
SAMTEC UNITED KINGDOM
117 Deerdykes View
Westfield, Cumbernauld
Scotland G68 9HN
Tel: 01236 739292 • Fax: 01236 727113
E-mail: *******************
SAMTEC GERMANY
Frühlingstr. 14
82110 Germering • Germany
0800-SAMTEC9 (0800 / 72 68 329) Germany only
Tel: +49 (0) 89 / 89460-0 • Fax: +49 (0) 89 / 89460-299
E-mail: ******************
SAMTEC FRANCE
4, allée Emile Reynaud
BUROPARC TORCY
77200 TORCY • France
Tél: 01 60 95 06 60 • Fax: 01 60 95 06 61
E-mail: ***********************
SAMTEC ITALY
Via Colleoni 25
Centro Direzionale Colleoni
Palazzo Pegaso Ingresso 3
20041 Agrate Brianza-Milano • Italy
Tel: 39 039 6890337 • Fax: 39 039 6890315
E-mail: ********************
SAMTEC ASIA PACIFIC
1 Kallang Sector #05-01
Kolam Ayer Industrial Park
Singapore 349276
Tel: 65 6745-5955 • Fax: 65 6841-1502
E-mail: ******************.sg
SAMTEC JAPAN
Aiku Bldg. 3F
5-5-1 Kokuryo-cho
Chofu-city, Tokyo 182-0022 Japan
Tel: 81-424-42-8318 • Fax: 81-424-42-8319
E-mail: ******************.jp
SAMTEC CHINA
East Ocean Centre, Suite 5E1
618 Yan An Road East
Shanghai, China 200001
Tel: 86-21-5385-4089 • Fax: 86-21-5385-4047
E-mail: ***********************
SAMTEC TAIWAN
4F, NO. 95, Sec. 3, Roosevelt Rd.
Taipei 106
Taiwan ROC
Tel: 886-02-2364-6077 • Fax: 886-02-2367-9531
E-mail: **********************.tw
SAMTEC HONG KONG
Room 7, 12/F, Shatin Galleria
18-24 Shan Mei Street
Fo Tan, Shatin, Hong Kong
Tel: 852-******** • Fax: 852-********
E-mail: ***********************
SAMTEC ANZ
5 Berrigan Court Oakleigh South
Victoria 3167 Australia
Tel: 613 9512 7747 • Fax: 613 9512 7745
E-mail: ******************
SAMTEC ON-LINE
Internet: 。