KCSA02-110中文资料
铝合金攻丝切削液
铝合金攻丝切削液
铝合金攻丝切削液是一款针对夏天高温天气所配制的一款切削液，有效防止切削液因为高温环境的发臭、腐败、变质等问题，适合在高温环境下使用。
防锈，滑性能好，适合高温恶劣环境使用。
一、美科铝合金攻丝切削液性能参数
名称铝合金攻丝切削液
型号MB133
适用材质铝合金、镁合金、锌合金、铜材等
加工方式切削、磨削、研磨、钻孔
包装18公升/桶，200公升/桶
二、铝合金攻丝切削液使用建议：
1、只用于工业，稀释比例（1:10~1:20）
2、没有美科切削液技术部的建议，请不要在铝合金攻丝切削液内加入其它物质
3、做铝合金攻丝切削液的浓度测试可以使用折光仪、BCG滴定法等。
三、铝合金攻丝切削液相关推荐：
特性切削油MD-230A 10 浅黄铸铁,有色金属,碳钢,合金钢,钻孔/攻丝/镗孔四、铝合金攻丝切削液知识分享：
化学滴定法通过测定切削液中的碱度
化学滴定法通过测定切削液中的碱度、表面活性剂含量或者其他特定组成的含量来确定切削液的浓度，其中碱滴定法和海明滴定法较常用。
碱滴定法是常规的滴定方法，操作方便，但是不能用于有补加碱的体系。
海明滴定法用于测定切削液中阴离子表面活性剂的含量。
同折光法和酸解破乳法相比，在检测工作液时所受干扰的程度相对较小，因而在集中供液系统
中，海明滴定浓度经常被用作补加浓缩液和补加水的主要依据。
用化学滴定法检测使用过的切削液时，同样会受到外来因素的干扰，通常由于漏入系统的杂油中可能会含有相同类型的化学物质而导致测定的数据偏大，另外机械加工碎屑和一些氧化产物可能会影响滴定终点的准确判断。
CK Switches KSC系列液体氮触摸开关数据手册说明书
T a c t i l e S w i t c h esKSC SeriesSealed Tact Switch for SMTFeatures/Benefits• Positive tactile feeling • J or G terminations • Various heights • IP67SpecificationFUNCTION: Momentary actionCONTACT ARRANGEMENT: 1 make contact = SPST, N.O.TERMINALS: J bend & Gullwing type for SMT SEALING: IP67 except KSC5 (IP50)Liability LimitationThis datasheet does not provide enough information forapplications that require a certain level of quality or safety such as automotive, medical systems, or safety equipement. Please contact customer service for the contractual specification package.EnvironmentalSilver Gold OPERATING TEMPERATURE: -40˚C to 85˚C -40˚C to 125˚C STORAGE TEMPERATURE:-55˚C to 85˚C-55˚C to 125˚CProcessSOLDERING: Depending on the application, this component issuited to the following methods:– Terminals being silver or gold plated over a nickel barrier, the use of slightly activated flux is suitable.– Soldering on double wave machine for vertical versions: soldering time ≤ 5 sec.– Cleaning according to typical washing processes.– Lead free reflow soldering process in accordance with IEC61760-1.Typical Applications • Automotive• Medical instruments • Industrial electronics• Network infrastructure and IT • ElevatorElectricalSilver Gold MAXIMUM POWER: 1 VA 0.2 VA MAXIMUM VOLTAGE: 32 VDC 32 VDC MINIMUM VOLTAGE: 20 mV 20 mV MAXIMUM CURRENT: 50 mA 10 mA MINIMUM CURRENT:1 mA*0.1 mADIELECTRIC STRENGTH (50 Hz, 1 min.): ≥ 250 Vrms CONTACT RESISTANCE: ≤ 100mΩINSULATION RESISTANCE (100 V): ≥ 10M ΩBOUNCE TIME: ≤ 1 ms* Ultra low current with 10 µA - 1 VDC version are available upon request for KSC2 and KSC4PackagingTape and Reel (see series for quantity information)NOTE: Specifications listed above are for switches with standard options.Note: KSC Series is subject to variants. Please contact customer service for other options.Tactile SwitchesKSC SeriesSealed Tact Switch for SMTJ J BENDG GULLWINGTactile SwitchesKSC XA SeriesSoft Sound Tact SwitchHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Features/Benefits • New soft sound • Extended cage • IP67• Long life• J terminations • Tape & reelTypical Applications• Automotive interior & openings(gear shift paddle, steering wheel, window lifter, seat adjustment modules, trunk & door handle modules)• Medical & industrial electronics (front panel, instrumentation)T a c t i l e S w i t c h esKSC SLT SeriesLong Travel Tact SwitchHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Features/Benefits • Long travel • Soft sound • IP40• J & G terminations • Tape & reelTypical Applications • Automotive interior • Front panel• InstrumentationTypeForce (N)Life (cycles)Travel (mm)KSC SLT 221J LFS 2.4 +/- 0.7200,000 1.35 +/-0.25KSC SLT 221G LFS 2.4 +/- 0.7200,000 1.35 +/-0.25KSC SLT 223J LFG 2.4 +/- 0.7 200,000 1.35 +/-0.25KSC SLT 223G LFG 2.4 +/- 0.7200,000 1.35 +/-0.25KSC SLT 241J LFS 3.5 +/- 0.9200,000 1.35 +/-0.25KSC SLT 241G LFS 3.5 +/- 0.9200,000 1.35 +/-0.25KSC SLT 243J LFG 3.5 +/- 0.9200,000 1.35 +/-0.25KSC SLT 243G LFG3.5 +/- 0.9200,0001.35 +/-0.25SpecificationFUNCTION: MomentaryCONTACT ARRANGEMENT: 1 make contact = SPST, N.O.TERMINALS: J bend & Gullwing type for SMTMechanicalMAXIMUM APPLIED FORCE: 40N* VALID ONE TIME. MAXIMUM ALLOWED TRAVEL TO AVOIDOVERLOAD ISSUES IS 1.70MM.ElectricalSWITCHING POWER MAX.: 1.0 VA 0.2 VAMAXIMUM POWER: 1.0 VA 0.2 VA MAXIMUM VOLTAGE: 32 VDC 32 VDC MINIMUM VOLTAGE: 20 mV 20 mV MAXIMUM CURRENT: 50 mA 10 mA MINIMUM CURRENT:1 mA1 mADIELECTRIC STRENGTH: ≥ 250 Vrms CONTACT RESISTANCE: < 100mΩINSULATION RESISTANCE: Initial measurement: ≥ 1GΩ After damp heat: ≥10MΩBOUNCE TIME: < 5 msEnvironmentalOPERATING TEMPERATURE: -40°C to +85°C (Silver) -40°C to +125°C (Gold)STORAGE TEMPERATURE: -40°C to +85°C (Silver) -40°C to +125°C (Gold)ProcessCompatible with the lead free reflow soldering process.PackagingIn reels of 1,000 pieces.Dimensions of reels according to EIA RS481 or IEC 2863.External diameter 330 mm ± 2 mm.2 2.4 N 4 3.5 NActuator2 Soft Silver GoldTactile SwitchesKSC SLT SeriesLong Travel Tact SwitchJ J BendG Gullwing6,2+0,36,2+0,30,70,0540,10,1+0,20,12,70,15+0,3-0,13,3 mini6,8+0,3-0,12,8 m a xLAYOUT - PADSCALE : 5**6,2+0,36,2+0,30,70,0540,10,1+0,20,12,70,15+0,3-0,1( 0,5 )( 15 )7,6+0,2-0,1100,32,8 m a x5LAYOUT - PAD SCALE : 5**TAPE & REEL400,330,03SECTION B-BSECTION A-A0,1T a c t i l e S w i t c h esKSC1 SeriesSealed Tact Switch for SMT+0,36,2 0+0,36,2 0+0,20,1 02,9 ma xø 21,5 m i n4˚ maxR 0,2smooth surfaceHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination JJ bend G GullwingKSC1 without actuator 2,5 mm highPackagingSwitches delivered on continuous tape & reels of 2,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmTactile SwitchesKSC2 SeriesSealed Tact Switch for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.KSC2 soft actuator 3,5 mm highPackagingSwitches delivered on continuous tape & reels of 2,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmT a c t i l e S w i t c h esKSC3 SeriesSealed Tact Switch for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination J J bend GGullwingKSC3 hard actuator 3,5 mm highPackagingSwitches delivered on continuous tape & reels of 2,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmTactile SwitchesKSC4 SeriesSealed Tact Switch for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.KSC4 soft actuator 5,2 mm highPackagingSwitches delivered on continuous tape & reels of 1,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmT a c t i l e S w i t c h esHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, selectdesired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.• SPDT NC-NO function • Silicone actuator • J or G terminations • Tape & reel • IP67PackagingIn reels of 1,000 pieces.Dimensions of reels according to EIA RS481 or IEC 2863.External diameter 330 ± 2 mm PCB LayoutTypical Applications • Automotive• Medical equipment • Industrial electronicsTypeForce (N)Operating Life (operations)Travel (mm)KSC441J DCT 70SH LFS 4.75 +/-1.25300,0000.85+0.35/-0.25KSC441G DCT 70SH LFS 4.75 +/-1.25300,0000.85+0.35/-0.2540,16,206,86,2 00,70,053,3 mini0,10 02,9 m a x5,20,22,70,10,850,05414312Visual poka yoke CSCALE 5LAYOUT - PADSCALE : 51 -2 NC 1 -3 NOHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, selectdesired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Features/Benefits • • • • • TypeForce (N)Operating Life (operations)KSC421G 70SH LFS PF 1.8+/-0.45300,000KSC421J 70SH LFS PF 1.8+/-0.45300,000KSC422G 70SH LFS PF 1.8+/-0.451,000,000KSC422J 70SH LFS PF 1.8+/-0.451,000,000KSC441G 70SH LFS PF 4 +/- 1300,0004 +/- 1300,000KSC442G 70SH LFS PF 4 +/- 11,000,0004 +/- 11,000,000KSC461G 70SH LFS PF 6.25+/- 1.75300,0006.25+/- 1.75300,000T a c t i l e S w i t c h esHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, selectdesired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Features/Benefits• Extended cage for mechanical stop • Silicone actuator • J termination • Tape & reel • IP67- Life time is 300,000 cycles at 20N actuation force- The extended cage can be used as mechanical stop for the activationbutton- Overload value reaches 200N (one time)PackagingIn reels of 1,000 piecesDimensions of reels according to EIA RS481 or IEC 2863External diameter 330 ± 2 mmTypical Applications • Industrial electronics • Consumer• Medical equipment • Automotive interiorTypeForce (N)Life Travel (mm)KSC421J 70SH LFS OF 1.65+/-0.45300,0000.5+/-0.25KSC441J 70SH LFS OF4.0+/-1.0300,0000.65+0.3/-0.26,2+0,3 06,2+0,30,70,0540,13,9 m a x0,14,7250,12,50,13,3 mini6,8+0,3-0,15,10,2**1How To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, selectdesired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.• Silicone actuator• J terminations • Tape & reel • IP67Type Force (N)KSC2 TE 01J LFS 1.60 ±0.6KSC2 TE 31J LFS 2.80 ±0.7KSC2 TE 41J LFS4.00 ±1.0T a c t i l e S w i t c h esHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, selectdesired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.• Silicone actuator • J terminations • Tape & reel • IP67• Game controllers/ Drones • Industrial applications • Medical applicationsTactile SwitchesKSC5 SeriesTact Switch with Rocker Option for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination J J bend G GullwingKSC5 hard actuator 5,6 mm highT a c t i l e S w i t c h esKSC6 SeriesSealed Tact Switch for SMT+0,36,2 0+0,36,2 02,9 m a x+0,20,1 01,6ø 4,7ø 2,97,7How To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination J J bend G GullwingKSC6 hard actuator 7,7 mm highPackagingSwitches delivered on continuous tape & reels of 950 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 380 ± 2 mmTactile SwitchesKSC7 SeriesSealed Tact Switch for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination J J bend G GullwingKSC7 soft actuator 4,4 mm highPackagingSwitches delivered on continuous tape & reels of 1,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmT a c t i l e S w i t c h esKSC8 SeriesSealed Tact Switch for SMT1,15ø 2,96ø 4,7+0,36,2 0+0,36,2 02,9 m a x 4,9+0,20,1 0How To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.KSC8 hard actuator 4,9 mm highPackagingSwitches delivered on continuous tape & reels of 1,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmTactile SwitchesHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Color20 Light grey 40 Red 80 White 90 BlackKSC9 SeriesSealed Tact Switches for SMTKSC9 hard actuator 7,7 mm highPackagingSwitches delivered on continuous tape & reels of 950 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 380 ± 2 mmR0,2510,2±0,1ø 6,35ø 615,4±0,4SWITCH WITH CAPT a c t i l e S w i t c h esKSC10 SeriesSealed Tact Switches for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.However, please note that all the combinations of these options are not feasible.For any part number different from those listed above, please consult your local representative.Termination J J bend G GullwingKSC10 soft actuator 4,9 mm highPackagingSwitches delivered on continuous tape & reels of 1,000 pieces Dimensions according to EIA RS-481/ IEC 60286-3 standard External diameter 330 ± 2 mmNote: KSC10 offered with yellow actuator as standard, hardness 55 Shore+0,3B–95Dimensions are shown: mmSpecifications and dimensions subject to changeTactile Switches26 May 22KSC11 SeriesSealed Tact Switch for SMTHow To OrderOur easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box.For any part number different from those listed above, please consult your local representative.Features/Benefits • Hard actuator • Long life• Positive tactile feeling • IP67 sealed • SMTElectricalMAXIMUM POWER: 1 VAMIN. / MAX. VOLTAGE: 0.02V / 32V MIN. / MAX. CURRENT: 1 mA / 50 mA DIELECTRIC STRENGTH: 250 Vrms CONTACT RESISTANCE: ≤ 100 mΩINSULATION RESISTANCE: (100V): 1000 MΩBOUNCE TIME: ≤ 5 msSolderingThis component is suited to the following methods:– Cleaning according to typical washing processes– Lead free reflow soldering process in accordance with IEC 61760-1PackagingIn reels of 1,700 piecesWidth of carrier tape: 16 mm Dimensions of reels: 380 mmTypical Applications • Gaming/ Drones • Industrial •Medical• High-end consumer • AvionicsN E WT a c t i l e S w i t c h esB–96Dimensions are shown: mmSpecifications and dimensions subject to changeN EW26 May 22KSC11 SeriesSealed Tact Switch for SMT6,2+0,36,2+0,30,70,0540,16,8+0,3-0,1LAYOUT - PAD**。
品牌C.K的电子塑料切割器产品说明书
C.K ECOTRONIC ESD - PRECISION SIDE CUTTERS
Item No. Description
A B CDE
Length Weight (mm) (g)
T3883 ESD Side Cutters – Micro 8 9.5 16 4 21 132
64
Blade Thickness (mm)
2
Blade Height at Tips (mm)
1.5
T3884
ESD Side Cutters - Micro, Reverse Cut
8
9.5 13 4 48
132
64
2
1.5
T3885 ESD Side Cutters - Slim
9 10 18 5 21 139
76
2.5
1.5
T3886
AB C D
E
mm mm mm mm mm
T3889 ESD Long Snipe Nose Pliers 49 12 6 1
2
T3890 ESD Short Snipe Nose Pliers 31 12 6 1 1.5
T3891 ESD Flat Nose Pliers3
31
3
2
T3892 ESD Snipe Nose Pliers (Bent) 39 12 6 1
• Special tool steel body, hardened for long-term performance
• Black oxidised finish for corrosion resistance and reduced glare
• Electro-static discharging handles - dissipative
AS-020加速度传感器
AS-020 申克振动加速度传感器AS-020加速度传感器常见用途：汽轮机TST测量：瓦振水轮机振摆监测：定子铁心振动及其绝对振动风机、压缩机、水泵振动监测：瓦振（盖振）接线方法：B端子……SIG（信号线）C端子……COM（公共端）A端子……-24V（电源线）技术指标：灵敏度：100mV/g内阻：≤5Ω灵敏度误差：≤±7%工作温度：-50℃~125℃最大振动加速度：±80g频率范围：4Hz~10kHz（±0.5dB）1.5Hz~15kHz（±3dB）共振频率：35kHz±3kHz尺寸：Φ21.6×54mm重量：约70克安装螺纹：M8双头螺栓选型指南：AS-020：水平/ 垂直振动测量传感器德国B&K-申克振动监测表系统振动传感器美国水分仪等更多产品北京多国科技罗继锋B&KVIBRO德国申克轴承振动控制器单通道双通道轴位移控制器VC-920、VC-1000CV-110、VC-1000CV-116、VC-1000RV-110、VC-1000RV-116、VC-1000AP-110、VC-1000AP-116、VC-1100C01、VC-1100C02、VC-1100C11、VC-1100C12、VC-1500轴承温度振动控制器B&KVIBRO德国申克速度传感器，防爆速度传感器水下应用传感器VS-0168VS-0169VS-0177VS-0188VS-066/050/1VS-067/050/1VS-068VS-069VS-069/100VS-077VS-079VS-080VS-080/OPT403VS-080/OPT603VS-277VS-288VS-289B&KVIBRO德国申克加速度传感器AS-020AS-022AS-022/050/1AS-022/100/0AS-022/100/1AS-030AS-062/050/0AS-062/050/1AS-062/100/0AS-062/100/1AS-062/T1/050/0AS-062/T1/050/1AS-063AS-065AS-068/050/0AS-068/050/1AS-068/100/0AS-068/100/1AS-068/200/0AS-069AS-070/001AS-070/001/200AS-070/002AS-070/002/200AS-073AS-079AS-080/01防爆加速度传感器ASA-020ASA-022ASA-022/050/1ASA-022/100/0ASA-022/100/1ASA-062ASA-062/050/1ASA-062/100/1ASA-062/300/1ASA-063ASA-068/100/0ASA-068/100/1ASA-069B&KVIBRO德国申克电涡流位移传感器1.5mm量程范围IN-081/3/070/50/0IN-081/3/110/50/0IN-081/4/070/50/0IN-081/4/110/50/0IN-083/3/070/50/0IN-083/4/070/50/0IN-084/3/060/50/0IN-085/3/070/00/0IN-085/4/070/00/0IN-085/OPT.404INA-081/3/070/100/INA-081/3/070/50/0INA-081/3/110/100/INA-081/3/110/50/0INA-081/4/070/100/INA-081/4/070/50INA-081/4/110/100/INA-083/3/070/100/INA-083/3/070/50/0INA-083/4/070/100/INA-085/3/070/00/0一体化传感器，内含前置器，无需多余的前置器。
危险化学品特性表_第3.3类
目录表—煤油的理化性质及危险特性 (1)表—2,2-二甲基庚烷的理化性质及危险特性 (2)表- 3,4-二甲基庚烷的理化性质及危险特性 (3)表- 正癸烷的理化性质及危险特性 (4)表—硝基乙烷的理化性质及危险特性 (5)表- 1-溴丙烷的理化性质及危险特性 (6)表- 邻二甲苯的理化性质及危险特性 (7)表—间二甲苯的理化性质及危险特性 (8)表—对二甲苯的理化性质及危险特性 (9)表—二甲苯异构体混合物的理化性质及危险特性 (10)表—1，3,5-三甲基苯的理化性质及危险特性 (11)表- 1，2，3－三甲基苯的理化性质及危险特性 (12)表—1,2,4－三甲基苯的理化性质及危险特性 (13)表- 邻二乙基苯的理化性质及危险特性 (14)表—甲基异丙基苯的理化性质及危险特性 (15)表—苯乙烯的理化性质及危险特性 (16)表- 正丁醇的理化性质及危险特性 (17)表- 异丁醇的理化性质及危险特性 (18)表- 仲丁醇的理化性质及危险特性 (19)表—乙二醇甲醚的理化性质及危险特性 (20)表—乙二醇乙醚的理化性质及危险特性 (21)表—乙二醇二乙醚的理化性质及危险特性 (22)表- 乙二醇异丙醚的理化性质及危险特性 (23)表- 丙二醇乙醚的理化性质及危险特性 (24)表—乙酸乙二醇乙醚的理化性质及危险特性 (25)表—正庚醛的理化性质及危险特性 (26)表- 二异丁基（甲)酮的理化性质及危险特性 (27)表—环己酮的理化性质及危险特性 (28)表- 原甲酸(三）乙酯的理化性质及危险特性 (29)表—乙酸异戊酯的理化性质及危险特性 (30)表—丙酸正丁酯的理化性质及危险特性 (31)表—丙酸正戊酯的理化性质及危险特性 (32)表—丙烯酸正丁酯的理化性质及危险特性 (33)表- 甲基丙烯酸正丁酯［抑制了］的的理化性质及危险特性 (34)表- 甲基丙烯酸异丁酯的理化性质及危险特性 (35)表- 丙烯酸异丁酯[抑制了的]的理化性质及危险特性 (36)表- 丙烯酸异辛酯的理化性质及危险特性 (37)表—乳酸甲酯的理化性质及危险特性 (38)表—乳酸乙酯的理化性质及危险特性 (39)表- 正硅酸乙酯的理化性质及危险特性 (40)表- N，N—二甲基甲酰胺的理化性质和危险特性 (41)表—乙烯三乙氧基硅烷的理化性质及危险特性 (42)表- 松节油的理化性质及危险特性 (43)表- 不饱和聚酯树脂的理化性质及危险特性 (45)表- 丁醇改性酚醛树脂的理化性质及危险特性 (46)表- 聚氨酯树脂的理化性质及危险特性 (47)表- 氨基树脂的理化性质及危险特性 (48)表- 不干性醇酸树脂的理化性质及危险特性 (50)表- 丙烯酸树脂的理化性质及危险特性 (51)表—丙烯酸底漆的理化性质及危险特性 (52)表—丙烯酸烘漆的理化性质及危险特性 (53)表—硝基腻子的理化性质及危险特性 (54)表- 铝银浆的理化性质及危险特性 (55)表- 醇酸清漆的理化性质及危险特性 (56)表—氨基清烘漆的理化性质及危险特性 (57)表- 醇酸绝缘漆的理化性质及危险特性 (58)表- 酚醛烘漆的理化性质及危险特性 (59)表—酚醛清漆的理化性质及危险特性 (60)表- 银灰酚醛磁漆的理化性质及危险特性 (61)表- 木材防腐漆的理化性质及危险特性 (62)表- 柴油的理化性质及危险特性 (63)表—一氯化苯的理化性质及危险特性 (64)表- 溴苯的理化性质及危险特性 (65)表—糠醛的理化性质及危险特性 (66)表— N,N－二甲基乙醇胺的理化性质及危险特性 (68)表- 环戊醇的理化性质及危险特性 (69)表—樟脑油的理化性质及危险特性 (70)表- 松油的理化性质及危险特性 (71)表—戊烯的理化性质及危险特性 (72)表- α－蒎烯的理化性质及危险特性 (73)表—β－蒎烯的理化性质及危险特性 (74)表- 氨基透明烘漆的理化性质及危险特性 (75)表-煤油的理化性质及危险特性表-正癸烷的理化性质及危险特性表-硝基乙烷的理化性质及危险特性表—1—溴丙烷的理化性质及危险特性表-二甲苯异构体混合物的理化性质及危险特性表—1,3,5—三甲基苯的理化性质及危险特性表-邻二乙基苯的理化性质及危险特性表-甲基异丙基苯的理化性质及危险特性表-苯乙烯的理化性质及危险特性表-乙酸乙二醇乙醚的理化性质及危险特性表—正庚醛的理化性质及危险特性表-二异丁基（甲）酮的理化性质及危险特性表—环己酮的理化性质及危险特性表—原甲酸(三）乙酯的理化性质及危险特性表-乙酸异戊酯的理化性质及危险特性表-丙酸正丁酯的理化性质及危险特性表-丙酸正戊酯的理化性质及危险特性表—丙烯酸正丁酯的理化性质及危险特性表-甲基丙烯酸正丁酯[抑制了]的的理化性质及危险特性表—甲基丙烯酸异丁酯的理化性质及危险特性表-丙烯酸异丁酯[抑制了的]的理化性质及危险特性表—丙烯酸异辛酯的理化性质及危险特性表—乳酸甲酯的理化性质及危险特性表—乳酸乙酯的理化性质及危险特性表—正硅酸乙酯的理化性质及危险特性表-N，N-二甲基甲酰胺的理化性质和危险特性表-乙烯三乙氧基硅烷的理化性质及危险特性表-松节油的理化性质及危险特性表—松香水的理化性质和危险特性表—不饱和聚酯树脂的理化性质及危险特性表—丁醇改性酚醛树脂的理化性质及危险特性。
韩国KC认证产品目录及分类
KTL 韩国产业技术试验院测试标准及认证产品分类KC认证使用的测试标准是国际IEC标准。
强制性电气安全认证产品目录1. (电线电缆 : Cables and Cords)①(95 )韩文英文 Cables and Cords Insulated electric wires中文 电线电缆 绝缘电线(95以下)②(95 ) ③ 6)Cables电缆(95以下)Polyvinyl chloride insulated Cord 电缆以上 6以下)④Cord set电源连接线2. (电气开关 : Switches for Electrical Appliances)韩文英文中文Switches开关①(30A)Switches for electrical appliances电气机器用开关(30A以下)②(63ASwitches for fixed electrical installation固定电气设施用开关(63A 以下)③(16A)Cord switchggg 拉线开关(16A 以下)④(16A)Electronic switches电子式开关 (16A 以下)⑤Remote control switches遥控开关⑥Time delay switches时延开关⑦???Dimmer调光器Electro-magnetic Circuit-breaker 电磁式断路器3. (电容器及电源滤波器 : Capacitors & Filters)韩文英文中文Capacitors & Filters电容器及电源滤波器①XYXY CapacitorX, Y 电容器②Complete filter units for radio无线电干扰抑制电源滤波器interference suppression③Capacitor for use in Tubular荧光灯用电容器fluorescent Lamp4. (电气设备部件和连接装置: Installation Accessories and Connection Devices)韩文英文中文Installation accessories and connection devices电气设备部件和连接装置①Connection devices for electrical 电气用品连接设备appliances②Appliances Coupler设备联接器③Plugs and socket-outlets插头和插座④Cable reel电缆卷盘5. (电气保护部件: Installation Protective Equipment)韩文英文中文Fuses, fuse holders, and 保险丝及保险丝支持件 thermal-links①,Fuses and fuse holders保险丝及保险丝支持件②Thermal-link温度保险丝Circuit-breakers for electrical Appliances机器保护用短路器①Overcurrent protective Circuit- 家庭用过电流保护短路器breakers for household②Circuit breaker for over-Current 过电流保护用断路器protection③Earth leakage circuit-Breaker通地漏泄保护断路器6. (家用绝缘变压器 : Safety Transformer and Similar Equipment)韩文英文中文Power transformers and voltage 电源变压器和调压器Regulators①Voltage regulator电压调压器②Power transformers for household 家用电源变压器③AC/AC adapter交流适配器7. (家电设备:Electrical Appliances for Household and Similar Equipment) (额定输出功率 10kW 以下, 不含防爆型和医疗机械专用)韩文英文中文Vacuum cleaners吸尘器①·Vacuum cleaners真空吸尘器, 吸水吸尘器②Floor treatment machine电地板洗尘器③Surface-cleaning appliance表面清洗机器④Steam cleaners蒸汽洗尘器,Electric irons and press电熨斗及熨平机①Electric dry iron电熨斗②Steam iron蒸汽电熨斗③,Trouser Press裤子④,Wrinkle Press皱纹熨斗⑤Ironing press电熨平机Dish washers and dish driers洗碟机和干燥器①Dishwasher洗碟机②dish dryer干燥器Electric heating appliances for 厨房用电热机器Kitchen①Electric ranges电灶②Electric ovens电烤箱③Electric grills烤炉④Electric induction hobs电感应滚刀⑤Hot plates heated directly电炉⑥Electric heaters电加热器⑦Toaster多士炉⑧Frying pans电炒锅⑨Portable grills手提式烤炉⑩Broilers烤焙用具⑾Waffle irons蛋奶饼的铁模,⑿Hot plate电炒板Washing machines and spin extractors洗衣机及脱水机①Washing machine洗衣机②Spin extractor脱水机Appliances for hair care护发机器①Hair driers电吹风②Curling irons电发熨斗③Curling rollers头发卷毛Warming plates and Electric hot 电保暖器及电热的碗柜 cupboards①Warming plates电保暖器②Electric liquor heating devices 电酒暖器③Electric hot cupboards电热的碗柜Motor-operated appliances for 厨房用电动机器(电动机额定输入功kitchen率 1kW 以下)①Juicers果汁机②Juicer mixers果汁搅拌器③Food mixer食物搅拌器④Juice extractor果汁提取器⑤Cream whipper奶油泡沫制造机⑥Egg beater蛋揉机⑦Mixer搅拌机器⑧Churn黄油制造机⑨Squeezer液体提取器⑩Slicing machine切片机⑾Knife sharpeners电刀磨具⑿Can openers电铁罐开启的工具⒀knife电刀⒁Coffee mill咖啡磨粉机⒂Ice mill冰磨粉机等⒃Meat grinder肉粉碎机⒄Noodle maker面条机⒅Meat slicer切肉片机⒆Electric bone cutters碎骨机⒇Others其他厨房用电器Electric appliances for heating liquids液体加热器①Rice cookers电饭锅②Rice cooker and warmer电饭及保温锅③Kettles电壶④Cooking pan电锅⑤Water boiler电水煮沸机⑥Medicine processing pot电药汤提取器⑦Coffee makers咖啡提取器⑧Steam cookers电蒸汽锅⑨ ⑩ ⑾ ⑿ ⒀,① ② ③ ④, ⑤ ⑥,① ②① ②①·② ③ ④①①①① ② ③① ② ③ ④ ⑤Egg boiler Milk heaters Nurser heaters Yoghurt makers Steam cookers and others蛋炊具 牛奶保温器 奶瓶保温机 酸牛奶制造机 煮沸烹调器Electric blankets and mats, electric Beds电毛毯(垫)和类似柔软的电热设备Cushions电垫Blankets电毛毯Mats电床垫Carpets电地毯Floor-mats电地板Beds电床Electric moxibustion machines and 电灸机和脚暖器foot warmersElectric moxibustion machine电灸机Foot warmers暖脚器Storage water heaters and Instantaneous water heatersStorage water heaters贮水式电热水器 温水器Instantaneous water heaters瞬间温水机Electric refrigerators and ice Makers Electric refrigerators and ice Makers Ice-cream freezers Water cooler Freezers制冷,冷藏,冷冻,制冰设备制冷,冷藏,冷冻,制冰设备冰淇淋冷柜 冷水器 制冰机Microwave ovens (using the freq 微波炉(300兆赫兹 ～30千兆赫兹) uencies of 300MHz - 30GHz range)Microwave ovens微波炉Sewing machines for Household家用电缝衣机Sewing machines for Household家用电缝衣机Battery chargers Battery chargers Electric driers Tumbler dryer Hand driers Clothes dryer and towel rail充电器 (输出电压50V 以下) 充电器 烘干机 回转干燥机 烘手机 干燥器Heaters Stoves Panel heater空间对流加热器 电暖炉 电热地板Radiators Fan heater Thermal-storage room heater电散热器) 暖风机 储存式电暖器Massage appliances按摩电器 (马达或振动子用的)①Massage appliances按摩电器 (马达或振动子用的)Air-conditioners and dehumidifier 空调器及除湿器①Air-conditioners空调器②Dehumidifiers除湿器Pumps and Electric waterspouts 流体泵[液体温度90℃以下, (额定输入功率以下)]①Pumps流体泵②Electric hot-water pumps热水泵Heating tools, Electric carving Machine电加热机器①Soldering iron焊铁②Desoldering iron脱焊烙铁③Soldering gun枪型焊烙铁④Thermoplastic conduit-welding 热塑性导管熔接机Tool⑤Household film-welding appliance 塑料薄膜胶粘机⑥Plastic cutting tool塑料切割机⑦Paint stripper涂料清除机⑧Heat gun加热枪⑨Electric carving devices电雕刻设备Sauna Appliances桑拿机器①Electric steam sauna appliance 电蒸汽桑拿机器②Sauna appliance电桑拿机器③Sauna heater桑拿机器用加热器④Steam sauna heater蒸汽桑拿用加热器Aquarium heaters, Air bubble generators, Fishbowls for display观赏及宠物用机器①·Aquarium heater (for plant)欣赏鱼用暖热器②,Electric heating devices for动物孵化,养殖用电热器hatching or breeding animals③Air bubble generator for aquarium 欣赏鱼用气泡发生器④Electric fish bowl for aquarium 观赏型水族槽Electric air bubble generators气泡发生器①Electric air bubble generators气泡发生器Insect killing or repelling devices 电冲击杀虫机①Insect killing or repelling devices 电冲击杀虫机Electric baths电浴缸①()Whirlpool bath漩涡型浴缸(含浴缸用气泡发生器)②()Mini bathtub for half the body微型半身(全身)浴缸③Liquid foot massager液体足疗器Air-cleaning appliance空气净化器(额定输入 500W 以下)①Air-cleaning appliance空气净化器Dispensing appliances and自动售货机vending machines (equipped withheating element or cooling deviceor discharge lamp oraccommodation)①Dispensing appliances and自动售货机vending machines,Electric fans, range hoods电风扇及抽油烟机(额定输入500W以下)①Electric fans电风扇②Duct fan抽风机③Ventilating fan换风机④Range hoods抽油烟机⑤Electric cold wind machines冷风机Electric appliances for toilets, 卫生间用设备 Electro-motive inhalers①Automatic washing and drying 自动洗涤干燥式便器toilet②heated seat or bowel电便座③Night soil inhalator污染物吸入器Humidifier加湿器①Humidifier加湿器Electric spray喷雾器①Electric spray喷雾器Electric Disinfectants电消毒箱()(for sterilization)(只认证带杀菌灯的消毒箱)①Electric Disinfectants电消毒箱Food waste process Machine 碎渣机(除外洗涤槽用)①Food waste process Machine 碎渣机Wet towel wrapping devices & 卷湿毛巾和湿毛巾包装设备 rolling devices①Wet towel wrapping devices湿毛巾包装机②Wet towel rolling devices湿毛巾卷机Other appliances which not covered by above product name but within the scope of EK certification其他类似机器8. (电动工具;Motor Tools) 额定输入功率以下韩文英文中文⑴Electric drill电钻⑵Electric screwdriver电动螺丝刀⑶Electric grinder电动砂轮机⑷Polisher电动抛光机⑸Electric sander电动砂光机⑹Electric circular saw电圆锯⑺Electric hammer电动锤钻⑻Electric sheet metal shear电金属剪刀⑼Electric tapper电动攻丝机⑽Electric reciprocating saw电往复锯⑾Electric concrete vibrator电振动机⑿Electric chain saw电链锯⒀Electric planner电刨⒁Electric grass sheer电草皮剪机⒂Electric tacker电钉枪⒃Router雕刻机⒄Other motor-operated Electric 其它电动工具tools (Trimmers etc)10. (信息及办公设备 ; IT and Office Appliances)韩文英文中文Printer复印机(光源的额定输出以下)①①(UPS)Printer DC power supplyDC power supply Uninterruptible Power Supply复印机直流电源装置(含各分类的适配器, 额定容量1kW以下)以及手机用适配器直流电源装置不停电电源装置①(UPS)()Uninterruptible Power Supply Laminating Machine不停电电源装置 覆膜机①()Laminating Machine11. (照明设备: Lightings)覆膜机韩文① ② ③ ④① ②PLS ③·( )④LED ⑤⑥(150W )英文中文Lamp holders Fluorescent lampholder灯插座 荧光灯用插座Edison base type lampholder Other lampholders灯插座 灯插座Starter holder for fluorescent 荧光启动器插座 lampsLuminaires (general purpose luminaires)一般照明设备Luminaires for fluorescent lamps 荧光灯具Luminaires for PLS typePLS照明设备Filament lamp luminariesDesk 白织灯具·台灯(调光功能有的) Lamp (include Dimmer)Luminaires for LED type Luminaires for Halogen LampsHigh voltage discharge luminariesLED灯具 卤素灯具高压放电灯设备（150W以下）Ballast & Lamps control gears 镇流器及灯控制装置①Magnetic ballasts for lamps②,Electronic ballasts for lamps③,Neon transformers④(LED )Step down converters for lighting devices(LED power supply is included)Self ballasted Lamps①Self ballasted Lamps自律（自愿）认证产品目录荧光灯用镇流器 荧光灯用电子式镇流器氖管用变压器 照明设备用变换器 (含LED电源装置)镇流器在内型荧光灯 镇流器在内型荧光灯2. (电气开关 : Switches for Electrical Appliances)韩文英文中文Automatic control electrical Devices自动控制组件①Temperature sensing controls温度调节器②Temperature protective防止高温控制装置Controls③Thermistors热敏电阻④Automatic electrical pressure自动压力感应开关sensing controls⑤Timers and time switches定时器及定时开关⑥Electrically operated motor驱动马达 驱动继电器starting relays⑦Energy regulators能效调节器6. (家用绝缘变压器 : Safety Transformer and Similar Equipment)(输入功率 5KVA 以下)韩文英文中文High frequency welders高频率焊机①High frequency welders高频率焊机Electric welders电焊机①Electric welders电焊机②Glue gun胶枪7. (家电设备:Electrical Appliances for Household and Similar Equipment) (额定输出功率 10kW 以下, 不含防爆型和医疗机械专用)韩文英文中文Fruit peeling devices水果剥皮机①Fruit peeling devices水果剥皮机Electric potato peelers土豆剥皮机①Electric potato peelers土豆剥皮机Electric rice-polishing Machines 碾米机①Electric rice-polishing Machines 碾米机Electric bread slicers面包切割机①Electric bread slicers面包切割机Electric melters电溶解器①Wax melters蜡溶解机②Chocolate melters巧克力溶解机③Paraffin melters石蜡溶解机Bathing machines for pets宠物用洗澡设备①Bathing machines for pets宠物用洗澡设备Appliances for skin or hair care 美容美发设备⑴Electric hair styling devices美发设备⑵Hair transplanting machine头发移植机⑶Shampoo machine洗发设备⑷Hair humidifiers毛发加湿器⑸Nail care devices剪甲器⑹Skin managers皮肤护理器⑺Electric shavers电剃须刀⑻Electric hair clippers电剃发刀⑼Facial sauna面部桑拿器⑽Low frequency stimulator低频率刺激机⑾ ⑿ ⒀ ⒁ ⒂ ⒃ ⒄ ⒅ ⒆ ⒇①①·① ②① ② ③①①() ②①, ②①① ② ③OHP ④①, ②①Ray irradiator光线辐照器Very high frequency stimulator 甚高频刺激机High frequency stimulator高频率刺激机Ultrasonic stimulator超声波刺激机Paraffin bathtub石蜡浴槽Mixed stimulator混合刺激机Four limbs Oppression circulation machine四肢压迫循环装置Laser irradiator激光辐照器Medical inhalator医疗用吸入器Air pressure Spraying grinder 空压喷射研磨机Electric liquor ripening Devices 电酒成熟器Electric liquor ripening Devices 电酒成熟器Electric clocks Electric clocks电钟 电钟Appliances for skin exposure to 红外线/紫外线皮肤管理器 ultraviolet and infrared radiationAppliances for skin exposure to 红外线放射皮肤管理器 infrared radiationAppliances for skin exposure to u 紫外线放射皮肤管理器 ltraviolet radiationElectric chairs for Barbershop & Electric motion beds理发用电动椅及电动床Electric chairs for Barbershop Electric motion beds理发用电动椅 电动床Electric heating chairs Compressor发热椅 压缩机Compressor压缩机Electric boilers, hot-water mats 电温水毯 and bedsElectric boilers针灸用气罐Electric hot-water mats and beds Oral hygiene appliances Toothbrushes Oral irrigators电温水毯及电温水床口腔洁净器 电动牙刷 口腔洗净器Electric fountains Electric fountains Projectors, OHP Slide projectors Film strip projectors OHP Film projectors Electric insect exterminate devices Insect exterminate devices Electric insect capturing devices Electric dust collectors电子喷水机 电子喷水机 投影机 幻灯投影机 胶卷带影机 高架投影机 胶片投影机 害虫灭绝机害虫灭绝机 电捕虫机集尘器Electric dust collectors集尘器Milking machines挤牛奶器①Milking machines挤牛奶器Electric polishers, Baggage服务型机器lockers,Paper money exchangers, Coin exchangers①Electric polishers磨光器②,Baggage lockers行李衣物柜③,Paper money exchangers纸币交换机④Coin exchangers硬币交换机Electric air curtains电空气门帘①Electric air curtains电空气门帘Fan coil units风机盘管①Fan coil units风机盘管Heat recovery ventilators回收废热通风设备①Heat recovery ventilators回收废热通风设备Electronic amusement Machines 电子娱乐机器①Laser shooting devices激光射击设备②Driving simulation gamedevices 驾驶模仿游戏设备③Doll vending machines玩偶自动售货机④Dart boards掷镖游戏靶⑤Basketball game devices篮球游戏设备⑥Other game devices其他游戏设备Electro-motive rolling screens 电动辗压屏幕①Electro-motive rolling screens 电动辗压屏幕Electrical fumigator电熏蒸机①Electrical insecticide fumigator 电熏蒸杀虫机②Electric fragrances电芬芳弥散机Defrosting heaters①Defrosting heatersNap removers起毛去除机①Nap removers起毛去除机·Oxygen or ion generators氧气·离子发生器①·Oxygen or ion generators氧气·离子发生器Electric water purifiers电净水器①Electric water purifiers电净水器②Electric ion water purifier电离子净水器Ultrasonic washers超声波洗净器①Ultrasonic washers超声波洗净器②Fruit and vegetable washers水果蔬菜洗净器Sprout and bean sprout growing 新芽和豆芽栽培设备devices①Sprout and bean sprout growing 新芽和豆芽栽培设备devicesElectric door locks电门锁①Electric door locks电门锁Electric exercise machines电锻炼设备①Electric exercise machines电锻炼设备motors马达①Single-phase motors单相马达②3 ( 3kw )Three-phase motors三相马达9. (音响, 图像应用设备 : Audio Video and Similar Electronic Appliances)韩文英文中文(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) TV (20)① ②Television receiver Video monitors Video tape player Video camera Tuner Editing machine Disk player Radio receiver Amplifier Speakers with amplifier Receiver Sounder recorder Sound players Audio system Electronic music instrument Satellite broadcasting receiver Video games Video phones Projection TV Equalizer Equalizer电视机 录影显示器 录像机 摄像机 调谐器 编辑机 光盘播放器 无线电接收机 扬声器 放大器内藏式扬声器 接收机 声音记录机及播放器 声音播放器 声频系统 电子乐器 卫星广播接收机 电视游戏机 可视电话机 投影电视机 均衡器 均衡器(21) (22) (23) (24)Audio processor Digital/Analog converters Audio distributor Compressor gate音频处理器 数字-模拟转换器 音频分配器 频带压缩选择器(25) (26) CCTV (27) (28) (29) (30) A/V (31) (32) CATVElectronic clocks CCTV cameras Image transmittersImage receivers and converters Image recorders A/V signal receivers Image processors CATV broadcasting receivers电子钟 监控摄像机 映像发送机映像接收机及转换器 映像记录器 音像讯号接收机 映像处理器 有线电视广播接收器(33)Audio and video teaching machines(34)Turntables(35)Modulators10. (信息及办公设备 ; IT and Office Appliances)韩文英文(1)Monitor(2)Printer(3)Projector(4)Scanners音像教导机器唱机转盘 调制器中文 显示器 打印机 投影机 扫描器(5)Bank note counter点钞机(6)Electronic scale电子秤(7)Cash register现金收入记录机(8)Language teaching machines语言教学机器(9)Paper shredders切废纸机(10)Paper punchers纸穿孔机(11)Paper cutting machines纸切割机(12)Bookbinding devices装订设备(13)Electronic blackboard电子黑板(拷贝板)(copy board)(14)Coin count machines硬币计数器(15)Electro-motive typewriters电动打字机(16) (17) (18)11.Electric demagnetizers Visualizer Stereography Reflex(照明设备: Lightings)电消磁器 显影仪 立体影像机韩文 ①英文中文Glow-starter for fluorescent lamp 荧光灯用辉光启动器 Glow starters for fluorescent lamps 荧光灯用辉光启动器②①·(??? ) ② ③ ①,Electronic starters for fluorescent lamps Filament lamp luminaires Filament lamp Luminaries· Desk Lamp(dimmer is excluded) Chandeliers FloodlightsDischarge lamps Fluorescent lamps荧光灯用电子式辉光启动器白炽灯灯具 白炽灯灯具台灯(调光器没有的)吊灯 泛光灯 放电灯 荧光灯②, ③, ④, ⑤, ⑥① ② ③LEDElectrode-less lamps Mercury lamps Metal-halide lamps无电极灯 汞灯 金属卤化物灯Sodium lamps Color lamps钠灯 彩色灯Other Luminaires其他照明机器Lighting chains圣诞节灯Luminaires for emergency lighting 应急照明灯具Luminaires for handlamps充电式携带灯具Other Lamps其他灯Incandescent lamps LED lampsHalogen lamps白炽灯 LED(发光二极管)灯 卤素灯。
凯克斯设备说明书中文版(仅作参考)
名义直径： 总长度：
3.18 mm (0.125″) 6200mm（244″）
KX170 机械说明书（B）
7/21
Kayex 机密
KX170 设备说明书
2.5 热屏提升
在设备的炉盖上设计有两点式的热屏提升机构。热屏的位置可以通过在 手动模式下的触摸屏来控制，同样也可以通过自动模式下的计算机控 制。自动模式下通过斜率表来控制移动。两个热屏提升口在炉盖上相隔 180 度分布。
极限真空压力： 泄漏率（压力上升速率）：
一般 25mtorr(该值是由真空泵和真空系 统决定) 50mtorr/hr
2.6.5. 氧化物控制系统
主真空系统在两个主真空接口的下游处都配置了一个空气注射阀用来 控制氧化物，通过计算机可以同时控制两个阀的开启，每个注射口的流 量稳定在大约或少于 5 升/分钟。
305mm（12″） 2800mm（110″）
KX170 机械说明书（B）
4/21
Kayex 机密
KX170 设备说明书
2.1.7 副室延长室
副室延长室是位于副炉室上部的一个圆筒形腔体。
延长室高度： 延长室内径：
508mm（20″） 191mm（7.5″）
2.1.8 水平调整器
水平调整器是封闭副室延长室上部并用来支撑籽晶提升的装配组件。通 过调整上法兰可以使籽晶旋转轴铅直垂直。水平调整器有两个氩气接入 口，一个熔体温度计接口，一个辅助真空接口。
隔离阀内径：
305mm（12″）
2.1.6 副炉室（接收室）
副炉室是位于隔离阀上的一圆筒形腔体。副炉室上设有便于操作者观察 的观察窗口（1）和籽晶位置监测口（2）。在副炉室上方的水平调整器 设有氩气进气接口（2），熔体测温计（1），一个辅助真空系统抽真空接 口。在副炉室上端还有一个清扫口。
卡索金属探测器手册
1.1. 怎樣使用操作手冊/ 使用說明 .......................................................... 1-1 2. 聲明 .............................................................................................. 2-2
7.4.1. 打開電源 .............................................................................7-15 7.4.2. 設定產品速度 .......................................................................7-16 7.4.3. 教導產品效應 .......................................................................7-17 7.4.4. 優化產品效應補償 .................................................................7-19 7.4.5. 檢查金屬靈敏度 ....................................................................7-20 7.5. 輸入產品名稱 ............................................................................7-21 7.6. 密碼功能 ..................................................................................7-22
马克特（Mactech）重型可移动工具机操作手册与零件列表，序列号 ______说明书
TABLE OF CONTENTSSection Page SAFETY INSTRUCTIONS:2 INTRODUCTIONMachine Specifications3Functions,Tooling,Drive3&4 Picture of Heavy Duty Portable Mill4Illustration of Heavy Duty Portable Mill5 MACHINE SET-UPAssembly Procedure6Installing Motor6&7 Hydraulic Power Set Up7 MACHINE OPERATIONHole Drilling,Boring,and Chamfering8Resurfacing and Milling9Machine Maintenance,Record of Use10 APPENDIX:PARTS/DIAGRAMSHeavy Duty Portable Mill11Servo Drive12Heavy Duty Portable Mill Quill Housing13SAFETY INSTRUCTIONS•Wear protective clothing,including safety glasses and steel toe boots.•DO NOT allow loose clothing or long hair near machine operations.•Keep work site and machine e brush to remove chips.DO NOT use hands or air hose.•Ensure adequate clearance around pipe before mounting milling machine.•Support machining surface for total machine weight.•DO NOT rush the job.Read this manual and understand the operating procedure beforeattempting any cutting operation.Call our toll freenumber(1-800-328-1488)if any problems arise.•Before connecting the hoses to the machine,be sure the following components are tightly secured:slide,tool bits,motor mount,and vertical feedsupport angle bracket.•Be sure the mill is completely secured to the work surface before starting the machine.•During actual machine operation,DO NOT touch or rest your hand on or near any moving parts orsharp edges.•Disconnect air hose or hydraulic power source BEFORE dismounting lathe from pipe.•NEVER MOVE MACHINE WHILE CONNECTED TO AIR OR HYDRAULIC SUPPLY.ALWAYS turnoff control valve and disconnect hoses BEFOREattempting to move the machine.INTRODUCTIONGeneral DescriptionMactech Heavy Duty Portable Mills are designed tomake on-site,close tolerance machining costeffective.Our mills can be clamped,bolted,ormagnetically attached directly onto the workpiece andmounted in any direction.Infinitely variable powerfeed is available on the vertical feed slide assembly. MACHINE SPECIFICATIONSCapabilities&FunctionsCapabilities•Drilling•Chamfering•Boring•TappingFunctionsMactech Heavy Duty Portable Mill are used toperform gamma plug installation,stud removal,thermoweld installation,and numerous other millingjobs.The milling machine can machine steel and various alloys,stainless steel,aluminum,copper-nickel,nickel-copper-iron,and bronze.ToolingHigh speed tool steel bits,drill bits and milling bits ordifferent sizes are available for most machiningoperations.Mactech stocks many standard tool bitconfigurations.Frame ComponentsThe milling head assembly feeds verticallyalong the cast iron feed support angle bracketinto the work piece.The bracked is attachedto the steel base plates,which can bepositioned for precise alignment.Both theextra and super duty models include additionalbracket supports.Vertical SlideThe slide is made of cast iron,comprised of ways andsaddles with adjustable gibs,and a full length feedscrew.Drive Assembly•In-Line Air Drive(97RPM max),also includes air caddy.•Hydraulic drive(137RPM max).Mactech Heavy Duty Portable MillView of Heavy Duty Portable Mill powered by hydraulic drive.Hand crank provides vertical feed.Reference No.Part Description No.1Tool Bit No.2Quill No.3Motor Mount No.4Hydraulic Motor No.5Vertical Slide Support &Bracket No.6Vertical Slide Support &Saddle No.7Steel Base Plates Model:Weight Travel HD Mill220lbs Vertical Travel 6”EHD Mill262lbs Vertical Travel 12”SHD Mill306lbs Vertical Travel 18”Air/Hydraulic Drive25lbs Servo Drive 25lbs 1234567MACHINE SET-UPRead SAFETY INSTRUCTIONS on Page1.Assembly ProcedureClear worksite of all obstructions and clean area.Assemble aluminum base components(if needed)and installon working surface(see below).Installation on Curved Surface(In-Line Pipe):1.Attach aluminum saddle to steel base by wrappingchains around pipe.Note:Have partner hold base while connectingchains around pipe.2.Square and level base to pipe surface(if necessary).3.Attach cast iron vertical support bracket and slide tothe steel base.4.Square and level base(if necessary).Installation on Flat Surface:1.Attach vertical support bracket to steel base and/or flatsurface(bolt,tack weld,clamp,or magnetically attach).2.Square and level base.Installing MotorCAUTION!Control Valve must be turned OFF beforeinstallation of motor.1.Insert motor so that keyed shaft aligns with the quillkeyway.Tighten motor mount screws.2.With control valve off,connect hoses to power supply/airsupply.Test run motor to check speed.HYDRAULIC POWER SUPPLY SET-UP**NOTE:See“Mactech Hydraulic Power Supply Handbook”for further information.1.Select230or460outlet.See inside electric controlbox for directions on how to change voltageconnections.**CAUTION:All electrical work must be performedby a qualified electrician.2.Connect hoses to couplings(#7).3.With pendant knob(#4)off and control lever(#5)neutral,turn off main switch.4.While viewing direction indicator(#2),turn on pendantknob.Shaft should spin in the direction of the arrow.If not,turn off pendant knob and main switch,changewiring rotation,and re-attempt step#3.When spinningproperly,the power supply is ready to use.SP ECIFIED COMPONENTS1.Main Switch(Control2.Motor Direction Indicator3.Hydraulic Fluid Reservoir4.Pendant On/Off Knob5.Pendant Control Lever6.Pressure Release Lever7.Couplings,Female/Male8.Fluid Sight GlassHydraulic Power Supply&Remote ControlMACHINE OPERATIONRead SAFETY INSTRUCTIONS on Page1.Note:The hand crank should offer some resistance while turning.If it is too loose or tight,the jam nuts may beslightly adjusted.Do not allow“slop”in the slides.Drilling and Sawing Holes1.Follow Set-Up procedures.Attach air or hydraulicsupply to the motor while control valve is OFF.Insertdrill chuck into quill and secure.Insert center drill bit,regular drill bit,spade bit or hole saw into chuck andsecure.Open control valve slowly to check functionand speed.e control valve to control cutting speed.To avoidchatter,do not allow saddles to extend beyondsupporting slides.If chatter vibration occurs,reducespeed.If tool bit(s)chip or become dull,replacee coolant when possible.CAUTION!The cutting operation is continuousuntil terminated by the operator.To stop machineduring cutting,back bit away from material,thenclose control valve.This will reduce tool pressureand potential gouging.3.Close control valve to stop motor.Disconnecthoses.Back tool to FULL OUT POSITION.Boring HolesFollow above procedures,with following exception:Replace drill chuck with boring bar and bit.If desired,use dial indicator for precise hole alignment. Chamfering HolesFollow above procedures,with following exception:Replace drill chuck with boring bar and angledchamfering tool.If desired use dial indicator for precisehole alignment.Step cut to desired depth and chamfer.Tapping HolesFollow above procedure,with following exception:Replace drill bit with tapping e dial indicator forprecise hole alignment.Facing Flat Surfaces(longitudinal and cross slides required)1.Follow drilling set-up procedures,but replace drillchuck with facing mill or fly cutter and bit.Opencontrol valve slowly to check function and speed.2.Turn crank on vertical slide to bring bit down tosurface.To avoid chatter,do not allow saddles toextend beyond supporting slides.e control valve to control cutting speed.If chatteror vibration occurs,reduce speed.If tool bit(s)chip orbecome dull,replace e coolant whenpossible.CAUTION!The cutting operation is continuousuntil terminated by the operator.To stopmachining process during cutting,back bit away frommaterial,then close control valve.This will reducetool pressure and potential gouging.4.Close control valve to stop motor.Disconnect hoses.Back tool to FULL OUT POSITION.Milling Flat Surfaces(longitudinal and cross slides required)Follow above procedures,with following exception:Replace cutter with tool shank holder and end mill oranother appropriate tool.Operation CompletionClose control valve.Disconnect air or hydraulicsupply.To remove portable mill follow set-updirections in reverse.MACTECH HEAVY DUTY PORTABLE MILLMACTECH Heavy Duty Portable Mill Operating Manual 10Machine MaintenancePrevent corrosion by cleaning machineexterior witha solvent,then apply rust inhibitors and store in a dry area.Grease internal gears regularly,depending on use.NOTE:Mactech recommends sendingthe machine to our service facility after every 250machininghours for inspection and tune-up(nominal fee applies).•RECORD OF MACHININGDate Hours Date Hours Date Hours TOTAL TOTAL TOTAL Parts InformationUse the attachedparts diagrams to order replacement parts.When ordering parts please include the following information:type of machine,serial number,contact person,phone/fax number,shipping address,date of purchase,and paymentinformation.。
巴索切削液
巴索切削液blasocut2000CFHDD875-72水溶性，矿物油基无氯切削液。
硬盘专用，特别为铝合金加工而设计的切削液blsocutBC40LF1402-02水溶性，矿物油基无氯切削液。
特别适用于软水，适合铸铁，钢，铝合金的切削加工。
原液中含有用防止软水中起泡的乙酸钙。
blsaocutBC35KombiSW1350-60水溶性，矿物油基通用型无氯切削液，特别适用于软水中。
通用型切削液。
适合铸铁，钢，铝合金，有色金属等的切削加工。
原液中含有用防止软水中起泡的乙酸钙。
blasocutBC251250-01水溶性，矿物油基通用型无氯切削液，通用型切削液。
适合铸铁，钢，铝合金等的切削加工。
blasocutkombisw883-64水溶性，矿物油基通用型无氯切削液，特别适用于软水中。
通用型切削液。
适合铸铁，钢，铝合金等的切削加工。
原液中含有用防止软水中起泡的乙酸钙。
blasocutBC40NF1402-01水溶性，矿物油基无氯切削液。
特别适用于软水，适合铸铁，钢，铝合金的切削加工。
blasocutBC37Mg1370-01水溶性，矿物油基镁合金切削液，特殊切削液。
特别适用于镁合金的切削加工，但也可以用在含镁量高的铝合金及铝，镁合金的切削加工上。
blasocutBC25MD1250-20水溶性，矿物油通用型无氯切削液，含特别用于有色金属加的添加剂。
适合铸铁，钢，铝合金，有色金属加工。
blasocutBC201200-01水溶性，矿物油基通用型切削液，适合铸铁，钢，铝合金等中高强度加。
更好的工件表面质量和更长的刀具寿命。
blasocutkombi883-03水溶性，矿物油基通用无氯磨削液，适合铸铁，钢，铝合金等的加工。
blasocut2000CF875-66水溶性，矿物油基通用型切削液，适合铸铁，钢，铝合金的切削加工。
blasocut2000CFSW875-64水溶性，矿物油基无氯切削液。
特别适用于软水，通用型切削液。
高温氧化对癸二酸二异辛酯黏度及黏温特性的影响
合成润滑材料SYNTHETIC LUBRICANTS42019年第46卷第1期DOI:10.3969/j.issn.l672-4364.2019.01.002推荐引用格式:费逸伟，姜旭峰,郭忠烈，等•高温氧化对癸二酸二异辛酯黏度及黏温特性的影响［J］.合成润滑材料,2019,46（1）:4-6.高温氧化对癸二酸二异辛酯黏度及黏温特性的影响费逸伟,姜旭峰，郭忠烈,彭显才（空军勤务学院，徐州221000）摘要：癸二酸二异辛酯是双酯型合成航空润滑油50-1-4©的基础油。
考察了高温氧化时间对50-1-40航空润滑油运动黏度和黏温特性的影响，以期为合成酯航空润滑油的使用和改进提供技术支持。
在200温度下，用反应釜模拟了航空润滑油的氧化条件，将50-1-40航空润滑油依次氧化2h,10h,20h,50h和100h,测定氧化后油样的运动黏度和黏度指数，并探讨其黏温特性变化情况…50-1-4®航空润滑油的运动黏度随氧化时间餉增加而逐渐降低，且在初始阶段变化较快。
黏度指数从135.5下降到115.0,表明高温氧化对50-1-4®航空润滑油的黏温特性有较大的影响。
氧化后的50-1-4©航空润滑油的黏温特性与Andrade方程的相关系数在1.0到0.9995之间，可以用Andrade方程来描述其黏温特性。
（图4表3参考文献14）关键词:合成航空润滑油运动黏度黏温特性高温氧化Andrade方程中图分类号:TE666文献标志码:A文章编号:1672-4364（2019）01-0004-030引言运动黏度是润滑油的一项重要指标，是选用润滑油的重要依据“切，也在很大程度上决定着摩擦副的油膜厚度及润滑油的承载能力。
航空润滑油要求有合适的运动黏度和良好的黏温性能⑶。
现代涡轮发动机润滑系统温度较高，发动机轴承部位温度有时能达到300七~400T，虽然润滑油的循环能降低油温，但当发动机停车时，滞留在轴承处的润滑油温度有时也能达到250°C-300七⑷。
手钳式封口机材质工艺 原理 结构
2020年你还在因为自己的产品太大找不到合适的封口机，你还在因为自己的货物太重没有适合的薄膜封口机，你还在因为加厚铝箔袋一般的封口机沾不住而烦恼吗今天凯比奇包装为你介绍一款手钳式加热封口机那就是（凯比奇PACK牌——KBQ-SC200/SC300/SC400/SC500/SC600大小手钳式封口机）专门针对大货产品，重型货物，不方便移动的物品使用我们这种手钳式电动封口机效果更好，在操作时只需要将手钳封口机拿到需要包装的和货物上轻松一夹即可封沾在一起结实牢固针对工业产品有良好的使用作用，如果你对我公司这款手钳式封口机感兴趣请联络凯比奇公司业务专员可以到我公司展示厅参观测试手钳封口机。
KBQ-sc200/sc300/sc400/sc500/sc600手钳封口机规格书：名称：手钳式封口机品牌：凯比奇PACK商标：TNZC28429934D01T181222型号：KBQ-SC200电压：110/220V功率：300W封口长度：200mm（不限大小）包装尺寸：440*310*155mm机器净重：1.1kg机器毛重：1.6kg——————————————————————————————————名称：手钳式封口机品牌：凯比奇PACK商标：TNZC28429934D01T181222型号：KBQ-SC300电压：110/220V功率：400W封口长度：300mm（不限大小）包装尺寸：440*310*155mm机器净重：1.2kg机器毛重：1.78kg——————————————————————————————————名称：手钳式封口机品牌：凯比奇PACK商标：TNZC28429934D01T181222型号：KBQ-SC400电压：110/220V功率：500W封口长度：400mm（不限大小）包装尺寸：440*310*155mm机器净重：1.40kg机器毛重：1.89kg——————————————————————————————————名称：手钳式封口机品牌：凯比奇PACK商标：TNZC28429934D01T181222型号：KBQ-SC500电压：110/220V功率：600W封口长度：500mm（不限大小）包装尺寸：440*310*155mm机器净重：1.50kg机器毛重：2.0kg——————————————————————————————————名称：手钳式封口机品牌：凯比奇PACK商标：TNZC28429934D01T181222型号：KBQ-SC600电压：110/220V功率：700W封口长度：600mm（不限大小）包装尺寸：440*310*155mm机器净重：1.60kg机器毛重：2.1kg手钳式封口机材质工艺原理结构：1、我们凯比奇PACK牌手钳式封口机插头采用漏电保护装置，我们的钳口采用铝材，我们的发热钳口内部装有日本进口发热管，这款手钳封口机的原理很简单就是通过发热管快速发热经过铝制钳头迅速导热达到快速封口粘接塑料包装袋的效果，这款手钳式封口机的结构是敞开式设计，这样有效针对大小产品通用封袋完全没问题，这就是我们这款凯比奇PACK牌手钳式封口机的基本材质工作原理设计结构基本条件。
卡博特 碳黑技术参数
M L
涂料、油墨：极佳分散性和稳定性，黑度好导电性最低，适用中高档工业涂料、UV油墨
V9A32
塑料、涂料：具有高着色力、良好的颜色。
普通色调
M570/E570
塑料、涂料、油墨：具有良好黑度、着色力.
MH
塑料、油墨、涂料:具有高着色力和低黏度。油墨、涂料:具有良好的流动性、分散性和光泽的油墨。用于涂料中有好的稳定性和着色力。
炭黑种类
牌号
用途和特性
导电和抗紫外光类
BP2000
吸油值：330M2/g，粒径：12nm，着色力:164塑料、涂料：在低炭黑填充情况下也能保持物理性能的高导电性炭黑.
VXC72
吸油值：174M2/g,粒径：30nm,着色力：87 塑料、涂料：用于导电和防静电的一种工业标准。
VXC605
VXC305
BP3200
200
122
117
18
148
144.2
304。4
导电炭黑
-
BLACK PEARLS 2000
添加量低，导电性高
1500
-
330
12
164
—
144。2
VULCAN XC72R
VULCAN XC72
可用于导电和防静电涂料
254
192
174
30
87
96.1
256。3
普通色素
—
VULCAN9A32
提供卓越的UV防护，黑度好
塑料：高质量的极纯碳黑,分散性好、高着色力、耐紫外光和抗静电等特性。
高色调类
S90B
涂料：在溶剂涂料中具有极高的黑度.
M1300
涂料：在溶剂和水性涂料中良好的黑度和高的黑度。
碳硅快速分析仪厂家哪家好
南京思博仪器科技有限公司点击文中飘蓝词可直接进入官网查看碳硅快速分析仪厂家哪家好碳硅快速分析仪厂家哪家好？碳硅元素分析仪对铸铁、球铁生产的炉前元素的控制，可迅速测定出碳硅元素的含量及碳当量，并根据测定结果及时进行配料的调整。
大大提高了成品率，减少了铁水在炉中的时间，缓解炉工的工作量。
那么，碳硅快速分析仪厂家哪家好？南京思博仪器科技有限公司，是一家专业从事碳硅元素分析仪的厂家之一。
碳硅元素分析仪厂家哪家好？----南京思博仪器科技有限公司。
如果你有碳硅元素分析仪这方面的需求，经过一系列的了解，推荐：南京思博仪器科技有限公司。
是拥有自主知识产权以高速分析仪器研制、开发、制造、市场营销为一体的现代化高科技公司。
提供专业的碳硅元素分析仪的厂家。
公司以满足客户需求为己任，凭借坚实雄厚的技术力量，认真严谨的科研态度，稳健的发展战略，成功打造出一支高质高效的科研团队，荟萃了电子工南京思博仪器科技有限公司点击文中飘蓝词可直接进入官网查看程、材料、计算机、分析化学、机械制造等专业的佼佼者。
专业从事分析实验仪器的研制开发、生产和销售。
南京思博仪器科技有限公司生产的SKS-2炉前快速碳硅分析仪，用抗电磁干扰、防尘、超薄便携设计，操作方便，非专业人员经简单培训即可操作，可与其它电子设备连接。
设有多条检测线，针对不同牌号的铁水以及各工厂铁水的实际情况选择恰当的检测线，使检测更科学准确。
测量原理：通过微处理器进行温度曲线的采集，通过铁水结晶法来测量计算碳硅成份及铁水品质。
通过改进的求值方法进行工作，能自动控制重要的冶金参数，弥补“光谱”难以测准非金属元素（C、Si）之不足，以及常规分析仪器不能满足炉前快速分析的时间要求，满足铸造生产的质量控制要求。
咨询碳硅快速分析仪厂家哪家好等相关信息，欢迎致电南京思博仪器科技有限公司或者登录官网：进行了解。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
元器件交易网
Blue
KCSA02-110
SPEC NO: DSAG0969 APPROVED: J. Lu
REV NO: V.2 CHECKED: Joe Lee
DATE: MAR/24/2006 DRAWN: W.J.ZHU
PAGE: 3 OF 4
元器件交易网www.cቤተ መጻሕፍቲ ባይዱ
PAGE: 4 OF 4
Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue
Device
KCSA02-110
Recommended Soldering Pattern (Units : mm)
Tape Specifications (Units : mm)
SPEC NO: DSAG0969 APPROVED: J. Lu
REV NO: V.2 CHECKED: Joe Lee
DATE: MAR/24/2006 DRAWN: W.J.ZHU
0.2INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 650PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT.
Note: 1. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR
Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.
SPEC NO: DSAG0969 APPROVED: J. Lu
REV NO: V.2 CHECKED: Joe Lee
DATE: MAR/24/2006 DRAWN: W.J.ZHU
PAGE: 1 OF 4
元器件交易网
Selection Guide
Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. KCSA02-110 BLUE (InGaN) WHITE DIFFUSED 1900 Typ. 10800 Common Anode, Rt. Hand Decimal. Description
Description
The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
元器件交易网
SURFACE MOUNT DISPLAY
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
P/N: KCSA02-110
BLUE
Features
Package Dimensions & Internal Circuit Diagram
Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm.
Typ. 468 470 25 65 3.65
Max.
Units nm nm nm pF
Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
4.2 10
V uA
Absolute Maximum Ratings at TA=25°C
Blue 126 30 160 5 -40°C To +85°C
Units mW mA mA V
SPEC NO: DSAG0969 APPROVED: J. Lu
REV NO: V.2 CHECKED: Joe Lee
DATE: MAR/24/2006 DRAWN: W.J.ZHU
PAGE: 2 OF 4