Netbackup 6.5 安装配置

平谷区政府信息中心Symantec Netbackup 6.5 安装配置手册目录安装环境 (1)服务器列表 (1)备份系统网络拓朴图 (1)安装步骤 (2)安装NBU6.5 Master Server(备份服务器) (2)安装Windows客户端 (8)安装Linux客户端 (12)配置Master server的设备 (19)察看系统是否能正确识别到设备 (19)安装NetBackup自带的磁带机驱动 (21)配置设备 (26)inventory robot (31)建立新卷池 (33)制定磁盘STU (36)制定文件备份策略 (39)恢复文件 (45)制定SQL Server备份策略 (51)恢复SQL Server (56)制定一个策略备份到多个STU (59)Catalog备份 (61)Catalog恢复 (69)日常监控 (71)使用Active Monitor (71)使用Device Monitor (73)查看磁带相关命令 (73)跟踪备份信息 (75)服务器列表备份系统网络拓朴图安装NBU6.5 Master Server(备份服务器)1）修改hosts文件在安装软件之前先修改系统的hosts文件C：\windows\system32\drivers\etc\hosts添加本机的IP地址与主机名的对应关系，如下：192.168.100.10 xxzx-b5dlo8hppv2）运行安装程序插入安装盘并运行安装程序，点击NetBackup Installation点击Install Server Software点击Next点击同意许可条件之后，来到如上画面，点击Next即可输入License，点击NetBackup Master Server默认会把本机的主机名自动填入，如果不是，请手工修改，点击Next即可EMM Server也使用本机的，点击Next点击Install开始安装安装完成后，直接点击完成，并退出安装完毕之后，在管理控制台中修改一些参数把每个客户段可以发起的job数改为3把允许覆盖的Media类型，全都选上安装Windows客户端首先在hosts文件中添加本机和master server的IP地址和主机名对应关系，文件位置：C：\windows\system32\drivers\etc\hosts内容如下：192.168.100.10 xxzx-b5dlo8hppv192.168.100.5 pjpgxxzx-dfis1u在Master Server的hosts文件中也要加入客户端的IP地址和主机名对应关系内容如下：192.168.100.5 pjpgxxzx-dfis1u插入安装盘并运行安装程序，点击NetBackup Installation点击Install Client Software点击Next选择同意，并点击next点击Next即可输入Master Server的主机名，然后把Additional Server删除，取消下面的对勾，Next点击Install安装好之后，点击Finish安装Linux客户端1)修改hosts文件首先在hosts文件中添加本机和master server的IP地址和主机名对应关系，文件位置：/etc/hosts内容如下：192.168.100.10 xxzx-b5dlo8hppv192.168.100.5 xxzx-zwwback在Master Server的hosts文件中也要加入客户端的IP地址和主机名对应关系内容如下：192.168.100.5 xxzx-zwwback2)开始安装如果是把安装文件上传到Linux中的，则需要cd到安装文件所在目录，执行如下命令，为文件添加可执行权限，命令如下：[root@localhost NBU_CLIENT]# chmod +x -R *然后运行:[root@localhost NBU_CLIENT]#./install如果使用光盘，则进入光盘的挂载目录中，运行：#./install根据提示进行安装即可，注意红色部分：Symantec Installation ScriptCopyright 1993 - 2007 Symantec Corporation, All Rights Reserved.Installing NetBackup Client SoftwareNOTE: To install NetBackup Server software, insert the appropriateNetBackup Server cdrom.Do you wish to continue? [y,n] (y)Do you want to install the NetBackup client software for this client? [y,n] (y) This package will install Linux/RedHat2.6 client.This package will install NetBackup client 6.5.（输入Master server的主机名）Enter the name of the NetBackup server : xxzx-b5dlo8hppvWould you like to use "localhost.localdomain" as the configuredname of the NetBackup client? [y,n] (y) n（输入本机的主机名）Enter the name of this NetBackup client : xxzx-zwwbackopenv/openv/lib/openv/lib/libvxSigScheduleJNI2.soopenv/lib/libnbservice.soopenv/lib/libVmangle.soopenv/lib/libVnbatST.so_newopenv/lib/libVnbat.soopenv/lib/libVnbatST64.so_newopenv/lib/libVnbat64.soopenv/lib/libnbmangleMT.soopenv/lib/libVcvcomb.soopenv/lib/libVcvcombMT.soopenv/lib/libVxSS_helper.so_newopenv/lib/libVxSS_helperMT.soopenv/lib/libVcvcomb_noul.soopenv/lib/libVcvcomb64.soopenv/lib/libVcvcombMT64.soopenv/lib/libVxSS_helper64.so_new openv/lib/libVxSS_helperMT64.so openv/lib/libVcvcomb64_noul.so openv/lib/libvnoauth.so_new openv/lib/libvnoauth64.so_new openv/lib/libvopie.so_newopenv/lib/libvopie64.so_new openv/lib/libcatbackup.soopenv/lib/libcatbackupMT.so openv/lib/libxm.soopenv/lib/libnborb.soopenv/lib/libnborbST.soopenv/lib/libubs.soopenv/lib/libdbsb.soopenv/lib/libvxACE.so.3openv/lib/libvxxml4c.soopenv/lib/libvxxml4cST.soopenv/lib/libvxicui18n.soopenv/lib/libvxicuuc.soopenv/lib/libvxustdio.soopenv/lib/libvxicudata.soopenv/lib/libvxACEST.so.3_new openv/lib/libvxicui18nST.so_new openv/lib/libvxicudataST.so_new openv/lib/libvxicuucST.so_new openv/lib/libvxustdioST.so_new openv/lib/libvxexticu.so.1openv/lib/libvxlis.so.1openv/lib/libvxul.so.1openv/lib/libvxexticuST.so.1_new openv/lib/libvxlisST.so.1_new openv/lib/libvxulST.so.1_new openv/lib/libmap.soopenv/lib/libvfutil.soopenv/lib/libvxsslST.soopenv/lib/map/openv/lib/map/libdisk.soopenv/lib/map/libemcpower.so openv/lib/map/librawp.soopenv/lib/map/libgfsp.soopenv/lib/libvxcryptoST.soopenv/lib/libvxcrypto.soopenv/lib/libvxssl.soopenv/lib/libvxPBX.soopenv/lib/libvxPBXCommon.so openv/lib/libvxPBXIOP.soopenv/lib/libvxPBXVxSS.soopenv/lib/libvxVxSSIOP.soopenv/lib/libvxACEXML.so.3openv/lib/libvxACEXML_Parser.so.3openv/lib/libvxTAO.so.3openv/lib/libvxTAO_BiDirGIOP.so.3openv/lib/libvxTAO_CosNaming.so.3openv/lib/libvxTAO_CosNotification.so.3openv/lib/libvxTAO_DynamicAny.so.3openv/lib/libvxTAO_ETCL.so.3openv/lib/libxbsa.soopenv/lib/libxbsaMT.soopenv/lib/libvxTAO_IORTable.so.3openv/lib/libvxTAO_Messaging.so.3openv/lib/libvxTAO_PortableServer.so.3openv/lib/libvxTAO_Security.so.3openv/lib/libvxTAO_Svc_Utils.so.3openv/lib/libxbsa64.soopenv/lib/libxbsaMT64.soopenv/lib/libnbbeclass.soopenv/lib/libnbbe_util.soopenv/lib/libnbbestdutl.soopenv/lib/libnbbedscomn.soopenv/lib/libdmpclaim.soopenv/lib/vxfi/openv/lib/vxfi/data/openv/lib/vxfi/data/vfiid_schema.xsdopenv/lib/vxfi/providers/openv/lib/vxfi/providers/libdevicefi.soopenv/lib/vxfi/providers/libemcclariionfi.so openv/lib/vxfi/providers/libemcsymfi.soopenv/lib/vxfi/providers/libhpevafi.soopenv/lib/vxfi/providers/libibmtsfi.soopenv/lib/vxfi/providers/libvxfsfi.soopenv/lib/vxfi/providers/libvxvmfi.soopenv/lib/vxfi/providers/libgfspfi.soopenv/lib/vxfi/providers/liblnxlvm2fi.so openv/lib/vxfi/providers/libnetappfi.soopenv/lib/vxfi/providers/librawprtfi.soopenv/lib/vxfi/providers/libdevicefiST.so openv/lib/vxfi/providers/libemcclariionfiST.so openv/lib/vxfi/providers/libemcsymfiST.so openv/lib/vxfi/providers/libhpevafiST.so openv/lib/vxfi/providers/libibmtsfiST.so openv/lib/vxfi/providers/libvxfsfiST.soopenv/lib/vxfi/providers/libvxvmfiST.soopenv/lib/vxfi/providers/libgfspfiST.so openv/lib/vxfi/providers/liblnxlvm2fiST.so openv/lib/vxfi/providers/libnetappfiST.so openv/lib/vxfi/providers/librawprtfiST.so openv/lib/libfi.soopenv/lib/libficmn_4_4.soopenv/lib/libfipdk_4_4.soopenv/lib/libfiprocessbackups.soopenv/lib/libfiutil.soopenv/lib/libscsitool.soopenv/lib/libdmpclaimST.soopenv/lib/libfiST.soopenv/lib/libficmn_4_4ST.soopenv/lib/libfipdk_4_4ST.soopenv/lib/libfiprocessbackupsST.soopenv/lib/libfiutilST.soopenv/lib/libscsitoolST.soopenv/lib/libnbmangle.so_newopenv/netbackup/openv/netbackup/bin/openv/netbackup/bin/bpbkaropenv/netbackup/bin/bpcd_newopenv/netbackup/bin/bpdynamicclientopenv/netbackup/bin/bpfilteropenv/netbackup/bin/bpbackupopenv/netbackup/bin/bprestoreopenv/netbackup/bin/bplistopenv/netbackup/bin/bpclimagelistopenv/netbackup/bin/bpclntcmdopenv/netbackup/bin/bphdbopenv/netbackup/bin/bpmountopenv/netbackup/bin/bpfisopenv/netbackup/bin/bptpcinfoopenv/netbackup/bin/nbfsopenv/netbackup/bin/SPSRecoveryAsstopenv/netbackup/bin/nblu_registration openv/netbackup/bin/merge_auth_templates openv/netbackup/bin/bpjava-msvcopenv/netbackup/bin/bpjava-usvcopenv/netbackup/bin/bpopenv/netbackup/bin/mtfrdopenv/netbackup/bin/bpnbatopenv/netbackup/bin/bmrcopenv/netbackup/bin/bmrsavecfgopenv/netbackup/bin/bmrsetupclientopenv/netbackup/bin/vxlogcfgopenv/netbackup/bin/vxlogmgropenv/netbackup/bin/vxlogviewopenv/netbackup/bin/ndmpclientopenv/netbackup/bin/goodies/openv/netbackup/bin/goodies/nbclient openv/netbackup/bin/bppsopenv/netbackup/bin/bp.kill_allopenv/netbackup/bin/bp.start_allopenv/netbackup/bin/nbftclntopenv/netbackup/bin/private/openv/netbackup/bin/private/nblogcfg openv/netbackup/bin/private/nbloggen openv/netbackup/bin/private/nblogmgr openv/netbackup/bin/private/nblogview openv/netbackup/bin/support/openv/netbackup/bin/support/nbsuopenv/netbackup/bin/nbfirescanopenv/netbackup/nblog.conf.templateopenv/bin/openv/bin/vauth_testdopenv/bin/vauth_utilopenv/bin/vauth_testopenv/bin/vnetd_newopenv/bin/vopie_utilopenv/bin/vopiedopenv/var/openv/var/auth/openv/var/auth/template.methods.txtopenv/var/auth/template.methods_allow.txt openv/var/auth/template.methods_deny.txt openv/var/auth/s_allow.txt openv/var/auth/s_deny.txt openv/var/vnetd/openv/var/vnetd/inetd_bpcd.txtopenv/var/vnetd/inetd_bpjava-msvc.txt openv/var/vnetd/inetd_vopied.txtopenv/msg/openv/msg/.confopenv/resources/openv/resources/vxul_root.resopenv/resources/SPSV2RecoveryAsst_root.res openv/resources/aggs_root.resopenv/resources/bmrc_root.resopenv/resources/bmrcommon_root.resopenv/resources/bmrd_root.resopenv/resources/bmrlaunch_root.resopenv/resources/bmrmedia_root.resopenv/resources/bmrpkg_root.resopenv/resources/bmrrestore_root.resopenv/resources/bmrsavecfg_root.resopenv/resources/bmrsetup_root.resopenv/resources/bmrsrt_root.resopenv/resources/ftservices_root.resopenv/resources/libraries_root.resopenv/resources/libdevicefi_root.resopenv/resources/libemcclariionfi_root.resopenv/resources/libemcsymfi_root.resopenv/resources/libfi_root.resopenv/resources/libhpevafi_root.resopenv/resources/libibmtsfi_root.resopenv/resources/libvxfsfi_root.resopenv/resources/libvxvmfi_root.resopenv/resources/libgfspfi_root.resopenv/resources/liblnxlvm2fi_root.resopenv/resources/libnetappfi_root.resopenv/resources/librawprtfi_root.resopenv/resources/nbecmsg_root.res+ /bin/cp NB-Java.tar.Z /usr/openvInstalling NB-Java./bin/tar: Read 4096 bytes from -gunzip: JRE.tar.Z: unexpected end of file+ /bin/cp ./nbj.conf /usr/openv/javaNo [x]inetd process found.The following automatic startup and shutdown scripts (respectively) have been installed. They will cause the NetBackup client daemonsto be automatically shut down and restarted each time the system boots./etc/rc.d/rc2.d/S95nbclient/etc/rc.d/rc3.d/S95nbclient/etc/rc.d/rc5.d/S95nbclient/etc/rc.d/rc0.d/K01nbclient/etc/rc.d/rc1.d/K01nbclient/etc/rc.d/rc6.d/K01nbclientStarting nbftclnt...LiveUpdate is not installed, skipping registration step...File /usr/openv/tmp/install_trace.30303 contains a trace of this install. That file can be deleted after you are sure the install was successful.如果xinetd服务没有启动，则需要把该服务启动起来：[root@localhost NBU_CLIENT]# chkconfig --list | grep inetxinetd 0:¹Ø±Õ 1:¹Ø±Õ 2:¹Ø±Õ 3:¹Ø±Õ 4:¹Ø±Õ 5:¹Ø±Õ6:¹Ø±Õ[root@localhost NBU_CLIENT]# chkconfig xinetd on[root@localhost NBU_CLIENT]# service xinetd startÆô¶¯ xinetd£º [ È·¶¨ ]能连接到本机的13724端口，成功[root@localhost NBU_CLIENT]# telnet localhost 13724Trying 127.0.0.1...Connected to localhost.localdomain (127.0.0.1).Escape character is '^]'.^]telnet> quitConnection closed.配置Master server的设备察看系统是否能正确识别到设备右击我的电脑，点击属性点击硬件选项卡，点击设备管理器看到HP 的磁带机没有驱动安装NetBackup自带的磁带机驱动运行安装程序，选择Addititional Product，点击NetBackup Tape Device运行安装程序点击下一步点击下一步点击下一步选择仍然继续点击下一步点击完成再次查看设备管理器，驱动已经正确安装好配置设备启动管理控制台点击Configure Storage Devices点击下一步点击下一步继续点击下一步点击下一步会识别到robot和磁带机，点击下一步选择是点击下一步点击下一步点击完成察看storage units 会有一个类似如下的名称：xxzx-b5dlo8hppv-hcart-robot-tld-0在策略中，指定这个作为STU，就会备份到带库中inventory robotinventory动作，是把带库中的磁带识别出来，然后在NetBackup中更新磁带的信息，每次在磁带库中添加磁带，减少磁带，或者改变磁带的位置，都要进行这个操作点击如图的菜单点击startvolume，而barcode会对应成media ID，默认情况下，volume会放到netbackup卷池中点击Yes之后，可以在NetBackup卷池中看到volume（卷）建立新卷池在Volume Pool上面点击右键，选择New输入Pool的名称，和其他信息卷池中的磁带可以从Scratch类型的pool分配，也可以手工分配，右击磁带选change在弹出的窗口中，选择需要移动到的目标池，点击OK即可制定磁盘STU点击如图的菜单输入name，storage unit type选择Disk，可以点击Brows选择一个目录，或者直接输入一个目录，作为备份存放的地方。