CSW-EL047V5 能源 10S 规格书样板
IUP系列智能直流电源说明书
在停电较长时间后或首次使用时，接上交流输入，开启开关，需连续充电 10 小时以上，以免要合分闸操作时，电池无法提供足够的功率。
■ 保护功能
5
IUP 系列智能微型直流操作电源
ivtsys 英微特电源
◆ 输出过压保护 直流输出有过压保护功能，当电压大于 231V，自动关闭输出，红色“关闭输
埃森·莫勒尔系列NZM型号的电缆保护器说明书
Eaton 259531Eaton Moeller series NZM - Molded Case Circuit Breaker.Undervoltage release, 24VAC, +2early N/O, 1General specificationsEaton Moeller series NZM release259531NZM1-XUHIV24AC401508259531937 mm66 mm32 mm0.084 kgUL/CSAIECRoHS conform UL (File No. E140305)CSA-C22.2 No. 5-09CE markingIEC60947CSA (Class No. 1437-01)UL (Category Control Number DIHS) UL listedCSA certifiedUL489CSA (File No. 22086)Product Name Catalog Number Model Code EANProduct Length/Depth Product Height Product Width Product Weight Compliances CertificationsIs the panel builder's responsibility. The specifications for the switchgear must be observed.24 VMeets the product standard's requirements.10 msIs the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.1.5 VAMeets the product standard's requirements.0 VTwo early-make auxiliary contacts0.8 W24 VIs the panel builder's responsibility.15 ms eaton-digital-nzm-brochure-br013003en-en-us.pdfeaton-feerum-the-whole-grain-solution-success-story-en-us.pdf eaton-digital-nzm-catalog-ca013003en-en-us.pdfDA-DC-03_NZM1eaton-circuit-breaker-release-nzm-mccb-dimensions.epseaton-circuit-breaker-undervoltage-nzm-mccb-3d-drawing-004.eps M1-XUHIV24ACIL01203002ZIntroduction of the new digital circuit breaker NZMThe new digital NZM RangeDA-CS-nzm1_xuDA-CD-nzm1_xueaton-nzm-technical-information-sheet10.11 Short-circuit ratingRated control supply voltage (Us) at AC, 50 Hz - min 10.4 Clearances and creepage distancesMinimum command time - min10.12 Electromagnetic compatibility10.2.5 LiftingPick-up power consumption at AC (undervoltage release) 10.2.3.1 Verification of thermal stability of enclosures Rated control supply voltage (Us) at DC - minFitted with:Pick-up power consumption at DC (undervoltage release) Rated control supply voltage (Us) at AC, 50 Hz - max 10.8 Connections for external conductorsMinimum command time - maxSpecial features BrochuresCatalogs Certification reports DrawingseCAD model Installation instructions Installation videos mCAD model Technical data sheetsUndervoltage release with 2 early-make auxiliary contacts, e.g., for early-make connection ofundervoltage release inmain switch applications, aswell as for interlock and loadshedding circuits.For use with emergency-stop devices in connectionwith an emergency-stopbutton.When the under-voltage tripis switched off, accidentalcontact with the circuitbreaker’s primary contacts isprevented when switchedon.Early make of auxiliarycontacts on switching onand off (manual operation):approx. 20 msUndervoltage releasescannot be installedsimultaneously with NZM...-XHIV... early-make auxiliarycontact or NZM...-XA...shunt release.Rated control supply voltage (Us) at DC - max0 V10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Rated control supply voltage24 V 50/60 Hz10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Used withNZM1(-4), N(S)1(-4)Electric connection typeScrew connection10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Number of contacts (normally closed contacts)10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Voltage typeACDrop-out voltage of undervoltage release AC/DC - min0.35 x UsFrameNZM1Reaction time19 msSuitable forOff-load switchVoltage tolerance - min.85Rated control voltage (relay contacts)24 V ACPower consumption1.5 VA (sealing AC)0.8 W (sealing DC)10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.Drop-out voltage of undervoltage release AC/DC - max0.7 x Us10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Connection typeWith terminal block on the left-hand switch side10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Voltage tolerance - max1.1Undelayed short-circuit release - min0 ARated control supply voltage (Us) at AC, 60 Hz - min24 V10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Terminal capacity (solid/flexible conductor)0.75 mm² - 2.5 mm² (2x) at shunt release with ferrule18 - 14 AWG (1x) at shunt release18 - 14 AWG (1x) for undervoltage releases, off-delayed0.75 mm² - 2.5 mm² (1x) at shunt release with ferrule0.75 mm² - 2.5 mm² (1x) for undervoltage releases, off-delayed with ferrule0.75 mm² - 2.5 mm² (2x) for undervoltage releases, off-delayed with ferrule18 - 14 AWG (2x) at shunt release18 - 14 AWG (2x) for undervoltage releases, off-delayed10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.TypeAccessoryUndervoltage release withearly-make auxiliary contact10.2.2 Corrosion resistanceMeets the product standard's requirements.10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Rated control supply voltage (Us) at AC, 60 Hz - max24 VNumber of contacts (normally open contacts)2Undelayed short-circuit release - max0 AEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaNumber of contacts (change-over contacts)。
10kV电容器柜规格书
(项目名称)10kV高压电容器柜技术规格书供审查版本日期版本说明编制审核审定日期签字技术规格书总页数:目录1 概述 (3)2 术语定义 (3)3 招标内容和技术要求 (3)4 遵循的标准及规范 (9)5 投标中技术文件的最低要求 (11)6 检验与验收 (12)7 购方提供的文件 (13)8 卖方需提供的技术文件 (13)9 卖方提供技术文件要求 (15)10 备品备件和专用工具 (17)11 技术服务 (17)附录1：卖方文件资料要求列表 (18)附录2：10KV干式电容器柜数据表 (19)1 概述本技术规格书为10kV高压电容器组专用技术规格书，作为招（投）标技术文件。
本技术规格书提出了对变电所中10kV高压电容器组的设计、制造、配套、文件、服务和验收等方面的最低要求。
对技术规格书中未提及的但又是必须的技术要求，卖方有责任提出建议，提供完善的性能。
2 术语定义用户：购方：卖方：3 招标内容和技术要求3.1 卖方资格3.1.1卖方应提供成熟技术和产品，并需有相关业绩和实际应用证明。
3.1.2所有主要设备的卖方的工厂均需获得ISO9000认证。
3.1.3 卖方需递交简介，内容包括为本项目设计、制造、供货、提供售后服务和技术支持的卖方、主要零部件分包商、部门、工厂。
3.2 总体要求3.2.1 卖方必须根据所提供的技术要求和资料给出尽可能详细的设备配套方案（包括必要的图纸），技术文件至少应包括：(1)选型样本；(2)安装使用说明书；(3)所遵循的出厂检验标准；(4)投标中应标的有关条款解释；(5)卖方必须根据所提供的技术要求和资料给出尽可能详细的设备配套方案（包括必要的图纸），说明设备的结构组成、工作参数、设备参数、设备安全措施及备品备件清单等。
(6)技术规格书要求的其它内容3.2.2 所有投标技术文件、合同技术文件、设计技术文件和图纸等均使用SI单位制。
3.2.3 卖方对技术规格书和数据表中遗编或认为存在不妥的地方可提出，双方讨论确定。
埃特罗斯电气样本
ፆ 1,0 ੇ 0,9
(Ω) 0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0,0
1
3
5
7
9
ժၿናۅ
图d：阻抗-谐波次数曲线图
11
13
15
17
19
ၿհْຕ
06
非调谐补偿滤波应用场合
如果是工业配电系统，一般5次谐波为频率最低且幅值最大的谐波，对于这 样的配电网，选择非调谐补偿滤波回路的调谐频率次数应低于5次谐波。 右侧图示曲线为电抗率7%的非调谐补偿滤波回路阻抗特性，回路的调谐频 率为189Hz。接入非调谐补偿滤波回路后，可以避免5次及以上谐波的放 大，同时，非调谐补偿滤波回路在调谐频率以上的阻抗低于系统阻抗，回 路可以吸收部分调谐频率以上的谐波，起到滤波作用。
无功补偿和滤波概述
配电网无功补偿与谐波概述
无功功率补偿
在电力系统中，大部分负载在消耗有功功率的同时，也需要大量的无功 功率，这些无功功率并没有被负载真正消耗，而是以电场和磁场的形式 进行交换，因此无功功率将造成： ◎ 占用供电设备容量 ◎ 增加变压器和输电线路损耗 ◎ 降低设备供电电压 ◎ 产生无功罚款，增加用电成本
UA
I UB
ࠃྪۉ
ࠃۉజ၍ UA
Վუഗ r
I
ࢁజ၍
UB
ۉඹഗ
RN XN RT XT
XC
图a：电网简化图及其单线图
串联谐振：图c的曲线图分析了串联起来的变压器和电容器（图b所示）的电路阻抗和谐波次数关系，曲线图显示了发生在11次谐波频率附近的
串联谐振。 当频率接近串联谐振频率时，供电母线上一个相对较低的谐波电压将会引起很大的谐波电流。 较大的谐波电流将会使负载母线上出现较高的谐波电压，使正弦电压发生畸变。
德特威勒产品手册可编辑
DMD
内模板
外模板
模板
(5-8um半径)
（0-23um半径）
1
0.33ps/m
0.33ps/m
2
0.27ps/m
0.35ps/m
3
0.26ps/m
1300nm
台阶（双向平均值）
≤0.10
dB
不均匀性（整个光纤长度）和衰减点不连续性
≤0.10
dB
背向散射衰减系数差异（双向测试）
≤0.10
dB/km
几何特性
芯径
62.5±2.5
um
包层直径
125.0±1.0
um
包层不圆度
≤1.0
%
涂层直径
242±7
um
涂层/包层同心度误差
≤12.0
um
涂层不圆度
≤6.0
unilanR MPS六类屏蔽配线架框架47
unilanR MS六类屏蔽配线架框架47
unilanR六A类屏蔽线缆48R六A类屏蔽配线架50
unilanR七类屏蔽线缆51
unilanR七A类屏蔽线缆54
unilanR GG-45系列7类模块55
Unipatch PS系列7A类模块56
%
芯/包层同心度误差
≤1.5
um
Unilan?万兆光纤特性
Unilan?德特威勒万兆多模光纤特性:
满足IEC60793-2-10A1b、IEEE802.3ae、Bellcore、EIA/TIA-492AAAC、ISO11801OM3、TIA/EIA-455和TIA568C.3-2009标准，在850nm处可以支持万兆以太网速率达300米及支持1000Base-SX达900米距离，同时又可向下兼容目前的1G，100Mbps，10Mbps以太网应用。
瑞士哈弗莱公司产品手册说明书
2763 / 2767 / 2769全自动互感器试验装置特点⏹ 单台仪器测量电流及电压互感器。
⏹ 全自动测量、数字显示电流/电压比误差、相移、试验电流及电压。
⏹ 可测量互感器的一次侧和二次侧的电流和电压。
⏹ 测试变压器和标准变压器的变比可以不同。
⏹高性价比：单台标准变压器即可测试不同的变压器；不同的标准变压器和试验变压器变比无需外部分压器即可相互匹配。
⏹ 可输入交互参数以简化操作。
⏹ 测量进行期间，微处理器监控所有输入和控制。
⏹ 2 x 16字符点阵，纯语言显示错误信息。
⏹ 测量耗时短。
⏹ 动态平均。
⏹ 精度高。
⏹ 固有负载低。
⏹ 可连接至外部打印机（RS 232C 接口） ⏹ 前板设有压电晶体制键盘。
⏹产品规格遵从IEC 60044-1, IEC 60044-2; IEC 60044-3; IEC 60044-7,ANSI/IEEE C57.13-1978 和 VDE 0414, part 2标准。
⏹ 含RS 232C接口用于连接计算机。
可选配件⏹ 遥控测量过程用- IEEE 488 接口 ⏹更多可选配件参见采购信息综述TETTEX 仪器公司出产的2767型电流/电压互感器自动测试装置是一款高效、精确的互感器测量仪，专为实验室、工业生产、质量管理及官方计量站应用而设计。
随着现今质量管理标准的日益严格，测量设备的操作舒适度和可靠性越发受到关注。
该款测试仪基于最新技术开发，开创了质量、可靠性、可操作性和可维护性上的新标准，在电流/电压误差、相位差和激励电流/激励电压的测量范围上，该仪器完全符合国际标准。
该仪器经过德国物理技术研究院（PTB ）测试，校正核准，完全符合PTB 仪表变压器测试标准。
全套测试系统同时，TETTEX 仪器公司也设计并销售计算机控制电流和电压互感器测量设备，以满足客户的特定需求，它们包括： ⏹ 2767型组合测试装置，用于电流和电压比互感器测试。
⏹ 4760系列标准电流互感器（电流比较器）。
法国尚飞电动卷窗产品手册
灵目50卷窗专用电机 ilmo50卷窗专用电机 灵动50带手动装置有线电机 灵锁50卷窗专用电机 Solus50卷窗专用电机
12V 电池电机
电池电机
·Oximo 40 DC RTS Oximo太阳能电池驱动卷窗电机
请参考卷帘控制方案（参考2-35至2-48页）
4-3 4-4 4-7
4-8 4-9
4-10 4-11 4-13 4-14 4-15
帘体重量
高度 < 1.5m
(kg) 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250
(mm)
卷 管
Φ 40
49
Nm Nm
13
Nm
外 径
Φ 49 45 Nm Nm
13
Nm
100
120
89 Nm Nm
Nm
Nm
Nm
Nm
Nm
Nm Nm
Nm
Nm
Nm
Nm
Nm
2.5m < 高度 < 3.5m
(kg) 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 (mm)
尚飞推荐： 电机：Oximo RTS电机：自动限位，限位免维护，中间限位，防上撬； 控制：RTS无线遥控
电动卷窗电机：
无线技术
WT
有线并联技术
有线技术
Oximo50 RTS 电机 LT50 CSI RTS 电机
Oximo50 WT 电机 ilmo50 WT 电机
通信用小微电源技术规范
通信用小微电源技术规范中国移动通信集团浙江有限公司通信用小微电源技术标准版本号：1.0.0中国移动通信集团浙江有限公司规划技术部二零一五年十二月目录1.范围 (1)2.规范性引用文件 (1)3.术语、定义和缩略语 (5)3.1.小微站点53.2.换流设备（单元）53.3.一体式53.4.模块化拼装式63.5.绝缘监测64.产品的组成和分类 (6)4.1.产品组成64.2.产品结构64.2.1.一体式产品结构 (7)4.2.2.模块化拼装式产品结构 (8)4.3.产品规格95.技术要求 (9)5.1.环境条件95.1.1.温度范围 (10)5.1.2.相对湿度范围 (10)5.1.3.大气压力 (10)5.1.4.冲击和振动 (10)5.2.系统外观与机械结构115.2.1.外观 (11)5.2.2.机械结构 (11)5.2.3.防护等级 (11)5.3.系统技术要求 115.3.1.系统容量 (11)5.3.2.系统输入 (12)5.3.3.系统输出 (12)5.3.3.1. -48V直流输出 (12)5.3.3.2. 280V直流输出 (12)5.3.4.系统并机工作性能 (13)5.3.5.系统峰－峰值杂音电压 (14)5.3.6.系统电压降 (14)5.3.7.温度系数 (14)5.3.8.保护功能 (14)5.3.8.1 .交流输入过、欠电压 (14)5.3.8.2. 直流输出过、欠电压保护 (15)5.3.8.3 .直流输出电流限制或输出功率限制功能 (15)5.3.8.4. 直流输出过流及短路保护 (15)5.3.8.5. 蓄电池过压、欠压、过流保护 (16)5.3.8.6.熔断器(或断路器)保护 (16)5.3.8.7.温度过高保护 (16)5.3.8.8.防雷性能 (16)5.3.8.9.保护接地性能 (17)5.3.9.输入、输出接口要求 (17)5.3.10.蓄电池管理功能195.3.11.通讯接口195.3.12.系统监控要求205.3.12.1总体要求 (20)5.3.12.2告警性能 (20)5.3.13.安全要求215.3.13.1绝缘电阻 (21)5.3.13.2抗电强度 (21)5.3.14.功率模块在线插拔功能225.3.15.电磁兼容225.3.16.材料阻燃性能235.3.17.系统噪声235.3.18.系统可靠性235.448V整流设备（单元）技术要求 245.4.1输入电压变动范围 (24)5.4.2交流输入频率变动范围 (24)5.4.3交流输入电压波形畸变率 (25)5.4.4交流输入功率因数 (25)5.4.5交流输入电流总谐波失真度 (25)5.4.6交流输入主电路接头间的相序和极性排列 (26)5.4.7源效应(电网调整率) (26)5.4.8开关机过冲幅度 (26)5.4.9启动冲击电流(浪涌电流) (26)5.4.10软启动时间275.4.11直流输出电压可调节范围275.4.12负载效应(负载调整率) 275.4.13负载效应恢复时间(动态响应) 275.4.14效率285.4.15接触电流285.4.16防雷性能295.5280V变换设备（单元）技术要求 295.5.1输入电压范围 (29)5.5.2开关机过冲幅度 (29)5.5.3启动冲击电流(浪涌电流) (30)5.5.4软启动时间 (30)5.5.5负载效应(负载调整率) (30)5.5.6负载效应恢复时间(动态响应) (30)5.5.7效率 (31)5.5.8防雷性能 (31)5.6蓄电池设备（单元）技术要求 315.7产品污染控制325.8包装运输贮存要求325.8.1包装要求 (32)5.8.2运输贮存要求 (32)6试验方法 (32)6.1试验环境条件326.2试验前准备336.3交流输入电压变动范围试验346.4输入频率变动范围试验346.5输入电压波形畸变率试验356.6输入功率因数试验356.7输入电流总谐波失真度试验356.8输入主电路接头间的相序和极性排列检查 (36)6.9整流设备试验 366.1048V直流输出电压可调节范围试验366.11稳压精度试验366.12系统杂音电压试验386.13直流配电部分电压降试验396.14输出分路要求396.15并联工作性能试验406.16监控性能试验416.17源效应（电网调整率）416.18温度系数试验426.19负载效应恢复时间（动态响应）试验446.19.1试验电路446.19.2试验方法与步骤456.20开关机过冲幅度试验456.21启动冲击电流（浪涌电流）试验466.22软启动时间试验476.23系统外观与机械结构检查476.24效率试验476.25系统音响噪声试验496.26交流输入过、欠电压保护试验496.27直流输出过、欠电压保护试验506.28直流输出电流限制或输出功率限制功能试验 (50)6.29直流输出过流及短路保护试验506.30蓄电池欠压保护试验516.31熔断器（或断路器）保护试验516.32温度过高保护试验526.33防雷性能试验526.33.1单相输入电源设备的纵向冲击实验。
远方电能量计量系统
远方电能量计量系统
1 电能量远方终端标准技术参数表
投标人应认真逐项填写标准技术参数表（见表1）中投标人保证值，不能空格，也不能以“响应”两字代替，不允许改动招标人要求值。
如有差异，请填写表8投标人技术偏差表。
表1-1电能量计量采集终端标准技术参数表
注1：项目单位对标准技术参数表中参数有差异时，可在项目需求部分的项目单位技术差异表中给出，投标人应对该差异表响应。
差异表与标准技术参数表中参数不同时，以差异表给出的参数为准。
表1-2电能表标准技术参数表
表1-3电压并列/电压切换装置标准技术参数表
表1-4保护柜标准技术参数表
注：项目单位对标准技术参数表中参数有差异时，可在项目需求部分的项目单位技术差异表中给出，投标人应对该差异表响应。
差异表与标准技术参数表中参数不同时，以差异表给出的参数为准。
微型燃气轮机技术规范书
多电源光伏微网项目微型燃气轮机技术规范书编制：复核：审核：批准：一、一般规定与规范1总则1.1.本技术规范提出的是最低限度的技术要求，并未对一切技术细节做出规定，也未充分引述有关标准的条文，卖方应提供符合本规范和有关最新工业标准的优质产品，同时必须满足国家有关安全、环保等强制性标准和规范的要求。
1.2.卖方应参加所供设备在现场的调试运行。
试运行中如出现质量问题应负责及时处理。
1.3.如未对本规范书提出偏差，将认为卖方提供的设备符合规范书和标准的要求。
1.4.技术条件签订后，卖方应指定负责本工程的项目经理，负责协调卖方在工程中的各项工作，如设计图纸、工程进度、设备制造、包装运输、现场安装、调试验收等。
1.5.本技术规范未尽事宜由买卖双方与设计单位共同协商解决，本设备技术规范书经买、卖双方确认后作为订货合同的技术附件，与合同正文具有同等的法律效力。
2应遵循的主要现行标准GB/T 13384-2008 机电产品包装通用技术条件GB/T 191-2008 包装储运图示标志GB/T 17626 -2006 电磁兼容试验和测量技术GB 7947-2006 人机界面标志标识的基本和安全规则导体的颜色或数字标识GB/T 12325-2008 电能质量供电电压允许偏差GB/T 15543-2008 电能质量三相电压允许不平衡度GB/T 12326-2008 电能质量电压波动和闪变GB/T 14549-1993 电能质量公用电网谐波GB 4208-2008 外壳防护等级（IP代码）（IEC 60529:1998）GB/T 15945-1995 电能质量电力系统频率允许偏差GB/T 4942.2-1993 低压电器外壳防护等级IEC 60947-3 低压开关第三部分：开关、断路器、开关-断路器和保险丝整合单元GB/T 17626.8 工频磁场抗扰度试验GB/T 14598.3-2006 绝缘试验GB/T 10489-2009 轻型燃气轮机通用技术要求GB4773-84 供热式汽轮机参数系列GB5578-85 固定式发电用汽轮机技术条件GB11120-89 L-TSA汽轮机油JB/T2900-92 汽轮机油漆技术条件JB/T2901-92 汽轮机防锈技术条件GB/T 2819-1995 《移动电站通用技术条件》以及其他IEC标准。
爱迪伦低压电力电路断路器说明书
Eaton SPS5083VEAXX2QEaton Power Defense SB, Standard, 800 A, 50 kA, 3-Pole, Fixed,PXR25LSIAM, 5083VEAXX2QGeneral specificationsEaton Magnum low voltage power circuitbreakerSPS5083VEAXX2Q78668975197514.6 in16.8 in16.2 in118 lbCCC Marked NEMA Compliant CE Marked SABA Listed Lloyd's Register Certified UL ListedDNV GL CertifiedABS CertifiedANSIKEMA CertifiedCSA CertifiedProduct Name Catalog NumberUPCProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications800 AUL 891StandardThree-polePower Defense SB UL 891 Standard Magnum PXR25Fixed Three-pole800 A 600 VAC Fixed 50 kA50 kA 800 A 800 A 600 VAC Zone selective interlocking application paperMagnum circuit breakers with Power Xpert Release trip units product aid Selevctive coordination application paper - IA0120000E3Magnum PXR and PD-SB double and double narrow frame UL Certificate of ComplianceMagnum PXR and PD-SB standard and narrow frame UL Certificate of ComplianceAmperage Rating Application FrameNumber of poles Type Application FrameSeriesTrip TypeMounting Method Number of polesRated uninterrupted current (Iu) Voltage rating Mounting Method Interrupt ratingInterrupt ratingAmperage RatingRated uninterrupted current (Iu) Voltage rating Application notes Brochures Catalogs Certification reportsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaMicrosoft Word - Power Xpert Protection Manager Quick Start Guide.docxPower Xpert Release trip unit for Magnum PXR circuit breakers PXR 20/25 user manualMagnum PXR low voltage power circuit breakers user manual Power Xpert Protection Manager x64 22.6 1 Power Xpert Protection Manager x32 22.06 1 Eaton Specification Sheet - SPS5083VEAXX2Q Low voltage circuit breakers guide spec Magnum PXR 20/25 electronic trip units time current curves Safer by design: arc energy reduction techniques Cyber security white paperMolded case and low-voltage power circuit breaker healthManuals and user guidesSoftware, firmware, and applications Specifications and datasheetsTime/current curvesWhite papers。
Belimo EV075+ARX-E N4HT 能源计量热水控制阀说明书
Energy metering pressure independentcontrol valve that optimizes, documents and proves water coil performance in chilled and hot water systems.• Nominal voltage AC/DC 24 V• Control Modulating, Communicative, Hybrid, Cloud• Measures Energy • Controls Power • Manages Delta T• Thermostat controlled internal heaterComponentsStructureThe Belimo Energy Valve consists of a characterized control valve, an actuator and a thermal energy meter with a logic and a sensor module.The logic module provides the power supply, the communication interface and the NFC connection of the energy meter. All relevant data are measured and recorded in the sensor module.This modular design of the energy meter means that the logic module can remain in the systemif the sensor module is replaced.External temperature sensor T1Integrated temperature sensor T2Logic module 1Sensor module 2Characterized control valve with actuator 3Technical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency50/60 HzRemark about nominal voltage range AC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 25W Transformer sizing 29 VA Connection EthernetRJ45 socketElectrical data Power over Ethernet PoE DC 37...57 V11 W (PD13W)Conductors, cables AC/DC 24 V, cable length <100 m, no shieldingor twisting requiredShielded cables are recommended for supplyvia PoEData bus communication Communicative control BACnet/IP, BACnet MS/TPModbus TCP, Modbus RTUMP-BusCloudFunctional data Valve size [mm]0.75" [20]Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input impedance100 kΩ (0.1 mA), 500 ΩOperating modes optional VDC variablePosition feedback U 2...10 VPosition feedback U variable VDC variableRunning Time (Motor)90 sSound power level Motor45 dB(A)Control accuracy±5%Min. controllable flow1% of V'nomFluid chilled or hot water, up to 60% glycol max(open loop/steam not allowed)Fluid Temp Range (water)14...250°F [-10...120°C]Differential Pressure Range 5...50 psi or 1...50 psi see flow reductions chartin tech docFlow characteristic equal percentage or linearBody Pressure Rating360 psiGPM11Pipe connection Internal threadNPT (female)Servicing maintenance-freeManual override external push buttonThermostat / Humidistat Type of contact Normally closed contactHeating output21 WSwitch-on current Max. 2.5 AThermostat range14...122°F [-10...50°C] (factory setting 86°F[30°C])Heater Aluminium profile, anodizedSensor element ThermobimetalMeasuring data Measured values FlowTemperatureTemperature sensor Pt1000 - EN 60751, 2-wire technology,inseparably connectedCable length external sensor T1: 3 m Temperature measurement Measuring accuracy absolute temperature± 0.35°C @ 10°C (Pt1000 EN60751 Class B)± 0.6°C @ 60°C (Pt1000 EN60751 Class B)Measuring accuracy temperature difference±0.22 K @ ΔT = 10 K±0.32 K @ ΔT = 20 KTemperature measurementResolution0.05°CRemote Temperature Sensor LengthStandard: 9.8 ft. [3m]Flow measurementMeasuring accuracy flow ±2%*Measurement repeatability ±0.5% (Flow)Sensor technologyUltrasonic with glycol and temperature compensation Safety data Degree of protection IEC/EN IP66Degree of protection NEMA/UL NEMA 4Enclosure UL Enclosure Type 4Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001UL 2043 CompliantSuitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMCAmbient humidity Max. 100% RH Ambient temperature -22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]MaterialsValve bodyNickel-plated brass body Flow measuring pipe brass body nickel-plated Stem stainless steel Stem seal EPDM (lubricated)SeatPTFE Characterized disc TEFZEL®O-ring EPDM Ballstainless steel••••Safety notesThis device has been designed for use in stationary heating, ventilation and air-conditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or aggressive gases interfere directly with the actuator and that is ensured that the ambient conditions remain at any time within the thresholds according to the data sheet.Only authorized specialists may carry out installation. All applicable legal or institutional installation regulations must be complied with during installation.The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.Application OperationProduct featuresWater-side control of heating and cooling systems for AHUs and water coils.The Energy Valve is an energy metering pressure independent control valve that measures, documents and optimises water coil performance.Operating modeFlow measurement Internal heating The HVAC performance device is comprised of four components: characterized control valve(CCV), measuring pipe with flow sensor, temperature sensors and the actuator itself. The adjusted maximum flow (V'max) is assigned to the maximum control signal DDC (typically 10 V /100%). Alternatively, the control signal DDC can be assigned to the valve opening angle or to thepower required on the heat exchanger (see power control). The HVAC performance device can be controlled via communicative or analog signals. The fluid is detected by the sensor in the measuring pipe and is applied as the flow value. The measured value is balanced with the setpoint. The actuator corrects the deviation by changing the valve position. The angle of rotation α varies according to the differential pressure through the control element (see flow curves).*All flow tolerances are at 68°F [20°C] & water.The thermostat monitors the temperature in the actuator housing and switches the connectedheating system on when the temperature falls below the set point. This prevents the formationof condensation on assemblies and electronic components, even in the presence of frequentand severe temperature fluctuations.The heating elements is designed for continuous operation.AccessoriesReplacement sensor modules Description TypeT-piece with thermowell DN 1/2" [15]A-22PE-A09T-piece with thermowell DN 3/4" [20]A-22PE-A10T-piece with thermowell DN 1" [25]A-22PE-A11T-piece with thermowell DN 1 1/4" [32]A-22PE-A12T-piece with thermowell DN 1 1/2" [40]A-22PE-A13T-piece with thermowell DN 2" [50]A-22PE-A14Tools Description TypeConverter Bluetooth / NFCZIP-BT-NFCElectrical installationSupply from isolating transformer.Parallel connection of other actuators possible. Observe the performance data.The wiring of the line for BACnet MS/TP / Modbus RTU is to be carried out in accordance withapplicable RS485 regulations.Modbus / BACnet: Supply and communication are not galvanically isolated. Connect earth signalof the devices with one another.Sensor connection: An additional sensor can optionally be connected to the thermal energymeter. This can be a passive resistance sensor Pt1000, Ni1000, NTC10k (10k2), an active sensorwith output DC 0...10 V or a switching contact. Thus the analogue signal of the sensor can beeasily digitised with the thermal energy meter and transferred to the corresponding bussystem.Analog output: An analog output is available on the thermal energy meter. This can be selectedas DC 0...10 V, DC 0.5...10 V or DC 2...10 V. For example, the flow rate or the temperature of thetemperature sensor T1 / T2 can be output as an analog value.Analog Control BACnet IP / Modbus TCPPoE with BACnet IP / Modbus TCPCable colors:1 = black, GND2 = red, AC/DC 24 V3 = white, Sensor optional5 = orange, DC 0...10 V, MP-Bus6 = pink, C1 = D- = A7 = grey, C2 = D+ = BBACnet MS/TP / Modbus RTUC₁ = D- = AC₂ = D+ = B Connection with active sensor Connection with switching contactConnection with passive sensorElectrical installationFunctionsFunctions with specific parameters (parametrisation necessary)MP-Bus, supply via 3-wire connectionMP-Bus via 2-wire connection, local power supplyA) additional MP-Bus nodes(max. 8)A) additional MP-Bus nodes(max. 8)Functions with specific parameters (parametrisation necessary)M-Bus with converter M-Bus with converter in parallelmode with BACnet IP / Modbus TCPM-Bus with converter in parallel mode with PoE with BACnet IP /Modbus TCPExamples of external wiring with actuator types ..24G..A = ActuatorT [°C] = ThermostatH = HeatingFunctions with specific parameters (parametrisation necessary)Override control and limiting with DC 24 V with relay contacts (with conventional control or hybrid mode)1) Position control 2) Flow control 3) Power controlFunctionsPermissible installation orientationInstallation location in return Water quality requirementsServicing Flow direction Cleaning of pipes Prevention of stressesInstallation notesThe ball valve can be installed upright to horizontal. The ball valve may not be installed in ahanging position, i.e. with the stem pointing downwards.Installation in the return is recommended.The water quality requirements specified in VDI 2035 must be adhered to.Belimo valves are regulating devices. For the valves to function correctly in the long term, they must be kept free from particle debris (e.g. welding beads during installation work). The installation of a suitable strainer is recommended.Ball valves, rotary actuators and sensors are maintenance-free.Before any service work on the control element is carried out, it is essential to isolate the rotary actuator from the power supply (by unplugging the electrical cable if necessary). Any pumps in the part of the piping system concerned must also be switched off and the appropriate slide valves closed (allow all components to cool down first if necessary and always reduce the system pressure to ambient pressure level).The system must not be returned to service until the ball valve and the rotary actuator have been correctly reassembled in accordance with the instructions and the pipeline has been refilled by professionally trained personnel.The direction of flow, specified by an arrow on the housing, is to be complied with, since otherwise the flow rate will be measured incorrectly.Before installing the thermal energy meter, the circuit must be thoroughly rinsed to remove impurities.The energy meter must not be subjected to excessive stress caused by pipes or fittings.Inlet sectionIn order to achieve the specified measuring accuracy, a flow-calming section or inflow section in the direction of the flow is to be provided upstream from the flow sensor. Its dimensions shouldbe at least 5x DN.Installation notesDimensionsDimensional drawingsTypeWeight EV075+ARX-E N4HT 14 lb [6.4 kg]ABCD E F 26.6" [675]12.9" [327]10.5" [267]9.6" [243]3.4" [86]3.4" [86]。
全黑高密度单面光伏模块商品说明书
ALL-BLACK High density MONO PERC modulePRODUCT CERTIFICATES*HiDM-BlackMORE POWERMaximize the light absorption area, module efficiency up to 20.16 %Low temperature coefficient (Pmax): -0.37 % / °CMORE RELIABLECANADIAN SOLAR INC.545SpeedvaleAvenueWest,Guelph,OntarioN1K1E6,Canada,,*************************ISO 9001:2015 / Quality management systemISO 14001:2015 / Standards for environmental management systemOHSAS 18001:2007 / International standards for occupational health & safetyMANAGEMENT SYSTEM CERTIFICATES*320 W ~ 340 WCS1H-320|325|330|335|340MSUP TO 20.16%Heavy snow load up to 5400 Pa,wind load up to 2400 Pa*Better shading toleranceLower internal current, lower hot spot temperatureCell crack risk limited in small region, enhance the module reliability IEC 61215 / IEC 61730: VDE / CE / MCSUL 1703 / IEC 61215 performance: CEC listed (US) / FSEC (US Florida)UL 1703: CSA / IEC 61701 ED2: VDE / IEC 62716: VDE Take-e-wayAs there are different certification requirements in different markets, please contact your local Canadian Solar sales representative for the specific certificates applicable to the products in the region in which the products are to be used.CANADIAN SOLAR INC. is committed to providing highquality solar products, solar system solutions and services to customers around the world. No. 1 module supplier for quality and performance/price ratio in IHS Module Customer Insight Survey. As a leading PV project developer and manufacturer of solar modules with over 38 GW deployed around the world since 2001.*According to the applicable Canadian Solar Limited Warranty Statement.linear power output warranty*enhanced product warranty on materials and workmanship** For detail information, please refer to Installation Manual.MECHANICAL DATA Specification Data Cell Type Mono-crystalline Dimensions 1700 ˣ 992 ˣ 35 mm (66.9 ˣ 39.1 ˣ 1.38 in)Weight 19.2 kg (42.3 lbs)Front Cover 3.2 mm tempered glass Frame Anodized aluminium alloy J-Box IP68, 3 bypass diodes Cable 4.0 mm² (IEC), 12 AWG (UL)Cable Length 1350 mm (53.1 in) (Including Connector) Connector T4 series or H4 UTX or MC4-EVO2 Per Pallet 30 pieces Per Container (40‘ HQ) 780 piecesTEMPERATURE CHARACTERISTICS SpecificationDataTemperature Coefficient (Pmax) -0.37 % / °C Temperature Coefficient (Voc) -0.29 % / °C Temperature Coefficient (Isc)0.05 % / °C Nominal Module Operating Temperature44±3 °CPARTNER SECTIONRear ViewFrame Cross Section A-AThe specifications and key features contained in this datasheet may deviate slightly from our actual products due to the on-going innovation and product enhancement. Canadian Solar Inc. reserves the right to make necessary adjustment to the information described herein at any time without further notice.Please be kindly advised that PV modules should be handled and installed by qualified people who have professional skills and please carefully read the safety and installation instructions before using our PV modules.CANADIAN SOLAR INC.545SpeedvaleAvenueWest,Guelph,OntarioN1K1E6,Canada,,*************************December 2019. All rights reserved, PV Module Product Datasheet V5.583_ENELECTRICAL DATA | STC*CS1H320MS 325MS 330MS 335MS 340MS Nominal Max. Power (Pmax)320 W325 W 330 W 335 W 340 W Opt. Operating Voltage (Vmp)36.2 V 36.6 V 37.0 V 37.4 V 37.8 V Opt. Operating Current (Imp)8.85 A 8.88 A 8.92 A 8.96 A 9.00 A Open Circuit Voltage (Voc)44.0 V 44.1 V 44.2 V 44.3 V44.5 VShort Circuit Current (Isc)9.41 A 9.45 A9.49 A 9.53 A 9.57 AModule Efficiency 18.98%19.27%19.57%19.86%20.16%Operating Temperature -40°C ~ +85°C Max. System Voltage 1000V (IEC/UL)Module Fire Performance TYPE 1 (UL 1703) or CLASS C (IEC 61730) Max. Series Fuse Rating 15 A Application Classification Class A Power Tolerance0 ~ + 5 W* Under Standard Test Conditions (STC) of irradiance of 1000 W/m 2, spectrum AM 1.5 and cell temperature of 25°C.ELECTRICAL DATA | NMOT*CS1H320MS 325MS 330MS 335MS 340MS Nominal Max. Power (Pmax)236 W240 W 243 W 247 W 251 W Opt. Operating Voltage (Vmp)33.4 V 33.7 V 34.1 V 34.5 V 34.8 V Opt. Operating Current (Imp)7.07 A 7.11 A 7.14 A 7.17 A 7.20 A Open Circuit Voltage (Voc)41.0 V 41.1 V 41.2 V 41.3 V41.5 VShort Circuit Current (Isc)7.60 A7.63 A7.66 A 7.70 A 7.73 A* Under Nominal Module Operating Temperature (NMOT), irradiance of 800 W/m 2, spectrum AM 1.5, ambient temperature 20°C, wind speed 1 m/s.ENGINEERING DRAWING (mm)CS1H-330MS / I-V CURVES5°C 25°C 45°C 65°C1000 W/m 800 W/m 600 W/m 400 W/m200 W/m A A V12111098765432105 10 15 20 25 30 35 40 45 50 V5 10 15 20 25 30 35 40 45 501211109876543210。
瑞丰WI-E-045发电机规格书说明书
Date :日期:1-8th Floor, Building #1,10th Industrial Zone, Tian Liao Community, Gong Ming Area, Guang Ming栋一至八楼Web/网址:Features特征 PLCC-4 Package. 垂直型表贴封装 Extremely wide viewing angle. 发光角度大Suitable for all SMT assembly and solder process. 适用于所有的SMT 组装和焊接工艺 Available on tape and reel. 适用于载带及卷轴 Moisture sensitivity level: 3. 防潮等级:3Package:2000pcs/reel. 包装:2000颗/卷RoHS compliant. RoHS 认证 Description 描述 The Red source color devices are made with AlGaInP on Substrate Light Emitting Diode红光LED 由AlGaInP 四种元素芯片激发而成The Green source color devices are made with InGaN on Substrate Light Emitting Diode 绿光LED 由InGaN 三种元素芯片激发而成The Blue source color devices are made with InGaN on Substrate Light Emitting Diode 蓝光LED 由InGaN 三种元素芯片激发而成 Applications 应用Optical indicator.光学指示 Indoor display.室内显示Landscape lighting,lamp belt. 景观照明,灯带等General suitable applications.其他适合的应用 TG-201705270439NPPackage Dimension 封装尺寸 外形尺寸:3.5*2.8*1.9mmNOTES:备注1.All dimensions units are mm. (所有尺寸标注单位为毫米)2.All dimensions tolerances are 0.2mm unless otherwise noted. (除特别标注外,所有尺寸允许公差为±0.2毫米) Electrical / Optical Characteristics at Ts=25°C 电性与光学特性Item 项目Symbol符号test condition测试条件Value unit单位Min. Max. Typ.Forward Voltage Rank B0RVf IF=20mA1.82.02.1V Rank C0 2.0 2.2 V Rank D0 2.2 2.4 V Rank G0G&B2.83.0G:3.1B:3.1V Rank H0 3.0 3.2 V Rank I0 3.2 3.4 V Rank J0 3.4 3.6 VDominant wavelength Rank D00RWld IF=20mA615.0 620.0621.0nm Rank E00 620.0 625.0 nm Rank F00 625.0 630.0 nm Rank D20G517.5 520.0521.5nm Rank E10 520.0 522.5 nm Rank E20 522.5 525.0 nm Rank F10 525.0 527.5 nm Rank F20 527.5 530.0 nm Rank D10B465.0 467.5470.2nm Rank D20 467.5 470.5 nm Rank E10 470.5 472.5 nm Rank E20 472.5 475.0 nmLuminous intensity Rank 1GTRIV IF=20mA200 230280mcd Rank I10 230 280 mcd Rank I20 280 350 mcd Rank J10 350 430 mcd Rank 1CMG700 9001520mcd Rank 1CN 900 1200 mcd Rank M10 1200 1500 mcd Rank M20 1500 1800 mcd Rank N10 1800 2300 mcd Rank H20B180 230370mcd Rank I10 230 280 mcd Rank I20 280 350 mcd Rank J10 350 430 mcd Rank J20 430 530 mcdReverse Current (R) IR VR=5V --- 10 --- uA Reverse Current (G) IR VR=5V --- 10 --- uA Reverse Current (B) IR VR=5V --- 10 --- uA Viewing Angle (R) 2Θ1/2 IF=20mA --- --- 120 Deg Viewing Angle (B) 2Θ1/2 IF=20mA --- --- 120 Deg Viewing Angle (G) 2Θ1/2 IF=20mA --- --- 120 Deg Thermal resistance (R) Rth(j-s) IF=20mA --- --- 260 ℃/W Thermal resistance (G) Rth(j-s) IF=20mA --- --- 165 ℃/W Thermal resistance (B) Rth(j-s) IF=20mA --- --- 95 ℃/WAbsolute Maximum Ratings at Ts=25°C 最大极限参数值Parameter参数Symbol(符号)Rating(值)Units(单位)Power Dissipation 功耗Pd R:72+G:108+B:108 mWForward Current 正向电流IF R:30+G:30+B:30 mAPeak Forward Current 峰值电流IFP 100 mAReverse Voltage 反向电压VR 5 VElectrostatic Discharge(HBM) 静电ESD 2000 VOperating Temperature 操作温度Topr -40 ~ +100 ℃Storage Temperature 储存温度Tstg -40 ~ +100 ℃Junction temperature 结温(R) Tj 105 ℃Junction temperature 结温(B) Tj 105 ℃Junction temperature 结温(G) Tj 105 ℃Note: 备注1 Note: 1. 1/10 Duty cycle, 0.1ms pulse width. 脉宽0.1ms,周期1/10.2. The above forward voltage measurement allowance tolerance is 0.1V. 以上所示电压测量误差0.1V.3. The above wavelength measurement allowance tolerance is ±1nm. 以上所示波长测量误差±1nm.4. The above luminous intensity measurement allowance tolerance ±10%. 上述发光强度的测试允许公差为±10%.5. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. 使用功率不能超过规定的最大值。
仪表规格书 小限流孔板规格书
Density
24 摩尔重量
MV
0.241
Mpag 241000
30 0.018 3.81
0.241
Mpag 241000
30 0.018 3.81
25 等熵指数 26 压缩系数 27 湿度 28
Cp/Cv Z RH%
29 30 型式 31 型号 32 制造厂 33 连接形式 34 连接尺寸 35 材质 36 孔板位号 37 孔径 38 最小厚度
Purge Type
Capillary Type
Model
Manufacturer
Connection Type 螺纹连接
Connection Size
1/4"NPT(Sch.80)
Material
316SS
Orifice Tag No.
230-FO-1503-7
Hole Diameter
NO.2(0.432)
Min.Thickness (mm) 厂家标准
Nipple Drilled Type
螺纹连接 1/4"NPT 316SS 230-FO-4001-28D NO.76(0.5mm) 厂家标准
概述 General
39
40
附件 Accessories
41 过滤器 42
Filter
43
44
45 注释 Notes:
kg/h
操作条件 Operation Condition
15 最大压力
Max. Pressure
16 正常压力
Nor. Pressure
17 最小压力
Min. Pressure
18 压力单位
Pressure Unit
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
变更履历表
版本 日期 变更前内容 变更后内容 变更原因
目录
1 性能参数 3
2 正面PCB菲林图 4.5
3 反面PCB菲林图 6.7
4 PCB接线图8
5 PCB结构图9
6 包装、运输指引9
电气特性 Electrical characteristics
Item 项目
Symbol 符号
Content 详细内容
Criterion 标准 V DET1
Over charge detection voltage
过充电检测电压
4.25±0.025V tV DET1 Over charge detection delay time
过充电检测延迟时间
1.2±0.3s Over charge Protection
过充保护
V REL1
Over charge release voltage
过充电解除电压
4.05±0.050V Input Charging Current
Input Charging Current
充电电流（充电器控制） 5A 正常 V DET2
Over discharge detection voltage
过放电检测电压 2.80V±0.080V
tV DET2 Over discharge detection delay time
过放电检测延迟时间
144ms Over discharge protection
过放保护
V REL2
Over discharge release voltage
过放电解除电压
3.00V±0.100V working current
工作电流 Continuous Output Discharging Curren
可持续工作电流
15A 正常
Bleed Start Point
均衡启动电压 --- Cell balance 均衡功能
Bleed Current 均衡电流
---
I DP
Over current detection current
过电流保护电流
60±5A tV DET3
Detection delay time
检测延迟时间 16ms
Over current protection
过流保护
Release condition 保护解除条件 Cut load 断开负载
Detection condition
保护条件
Exterior short circuit
外部电路短路 Short protection
短路保护
Release condition 保护解除条件
Cut short circuit 断开短路电路
Interior resistance
内阻
R DS Main loop electrify resistance
主回路通态电阻
R DS ≤50mΩ Current consumption
消耗电流
I DD
Current consume in Idle mode
静态耗电
≤150μA
备注：以上参数为推荐值，用户可依据实际应用进行 产品尺寸：70*40*3.0mm
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
Topt=25℃
PCB 正面丝印图:
PCB 正面焊盘图
备注：
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
PCB 正面贴片图:
PCB 正面走线图：
备注：
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
PCB 反面丝印图:
PCB 反面焊盘图
备注：
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
PCB 贴片图:
PCB 反面走线图：
备注：
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
PCB 接线图 Application Circuit
(1) 连接顺序
a) 在P+/B+、P- 端子上分别引线，以方便测试时连接充电器和负载，或者直接连接至充放电插座。
b) 连接电芯最低节负极到保护板的B-端
c) 将连接好的电压检测线插头插至保护板的插座中 d) 连接电芯最高节电芯正极到保护板的B+/P+ 端 (2) 断开顺序
a) 移除所有负载和充电器
b) 断开电芯最高节电芯正极与B+/P+ c) 拔下排插插头
d) 断开电芯最低节电芯负极与B- (3) 关于平衡板
a) 如果同时配了平衡板的话，请注意散热处理，建议使用导热胶垫将散热器与平衡电阻绝缘。
在对装好保护板的电池组进行充放电测试时,请不要使用电池老化柜对电池组各节电池电压进行测量，否则有可能损坏保护板和电池。
警告：把保护板连接至电芯，或从电池组拆下保护板时，必须遵守以下连接顺序与规定；如果不按要求的顺序作业，会损坏保护板的元器件，从而导致保护板不能保护电芯，造成严重的后果。
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
设 计 日期
PCB 结构图
Mechanical Requirement
包装、运输指引
1． 包装
将成品PCBA 平整放入干净的气泡袋中，封好。
2． 运输
用快递或派专人送货。
运输过程中，应注意防潮、防湿，避免挤压、碰撞等，
以免保护板变形。
注：请置于阴凉干燥的环境中保存
备注：工艺要求 喷锡/绿油/白字/HSF PCB 公差：±0.2mm
样板来源
CSW-EL047V5 10S
1
2 产品承认书
样板确认记录
3 制 表 日期
型 号 板材 板 厚 工 艺
设 计 日期 10SD FR-4 1.6 喷锡
司。