EMB-QM67
贴片三极管标识代号
汶川地 震，我们 看到什么
what is love 贴片三极 管代码1
work 2008-0528 21:43:04 阅读2529 评论11 字号：大 中小 JX SOT23 BAV170 B dual cc Si diode low Ir JY SOT23 BAV199 dioda-2x JY SOT23 BAV199 D dual series Si diode lowIr JZ SOT23 BAW 156 JZ SOT23 BAW156 A dual ca Si diode low Ir K SCD80 BBY5202W I UHF varicap 1.751.25pF
K15 DTA124G N pnp sw 50V 50mA w. b-e res K1p SOT23 BCW71 N BC107A K1t SOT23 BCW71 N BC107A K1X SOT23 KSC3265 NPN K2 SOT23 BCW72 NPN K2 SOT23 BCW72 N BC107B ZXT300 K2 SOT23 HSMP3832 D dual HP3830 pin diode K24 DTC114G N npn sw 50V 100mA w. b-eres
L5 SOT23 MMBC1623 L5 NPN L51 SOT143 BAS56 dioda-2x L51 SOT143 BAS56 S dual 60V 200mA diodes L52 SOT23 BAS678 dioda L6 BAR17 C pin diode L6 BSS69R N pnp 40V 0.1A 200MHz sw L6 MMBC1623 L6 N MPS3904 hfe 200400 L6 SOT23 BAR17 dioda L6 SOT23 BSS69R PNP
Magnum Panel Systems UL1741 交流系统设备 MMP - 小型马格南面板说明
MagnumPanel Systems UL1741 Interconnection System EquipmentThe MMP – M ini M agnum P anel is an inclusive, easy-to-install panel designed to work with one Magnum MS-AE, MS-PAE, MS, RD or other non-Magnum inverter/charger.FEATURES:Small footprint:⏹only 12.5” wide x 18” tall x 8” deep Money-saving design:⏹not only is the MMP less expensive, but it is pre-wired for fast installation, saving labor costs Easy access:⏹front-mounted breakers and remote (optional)PART NUMBERSThe MMP EnclosureThe MMP shown with inverter (sold separately) and optional remote and backplate.Choices:⏹can bewired for 120 V AC or 120/240 V AC output Inclusive:⏹works with non-Magnum inverter/chargers (stand-alone parts included)Listed: ⏹ ETL listed to UL1741 and CSA C22.2 107-01DC load breakers:⏹ fits either din rail or back-mount DC load breakers.INCLUDES:One DC breaker – 175A or 250A ⏹One AC bypass breaker – 30A⏹dual pole or 60A single pole One AC input breaker – 30A ⏹dual pole or 60A single pole500A/50mv DC shunt ⏹DC buss bars for battery⏹positive and negativeDin rail or back mount for⏹optional DC mini breakers – will hold up to eight breakersThe MPSL shown with a single inverter (sold separately).The MPSL shown with two inverters (sold separately), an MPX extension to accommodate a second inverter, an optional dual backplate, and an optional router.The MPSL – M agnum P anel, S ingle Enclosure, L ow Capacity – is designed to accommodate a maximum of two inverters.FEATURES:Expandable:⏹start with the enclosure and just one inverter and in the future expand to two inverters with ease, using the MPX.Easy installation:⏹all connections are front-mounted, including AC and DC breakers and the MPX.Labor saving:⏹ panel is pre-wired for fast installation, saving labor costs.DC load breakers:⏹ fits either din rail or back-mount DC load breakers.Convenient knockouts:⏹ knockouts on the side of the enclosure are compatible with most charge controllers.INCLUDES:One DC breaker – 250A ⏹One 60A AC bypass breaker ⏹500A/50mv DC shunt ⏹Inverter AC input protection ⏹MPX extension includes⏹AC/DC circuit protection and wiringPART NUMBERSThe MPSH shown with three inverters (sold separately), two MPX extensions to accommodate the additional inverters, two backplates, and an optional router.The MPSH – M agnum P anel, S ingle Enclosure, H igh Capacity – is designed to accommodate a maximum of three inverters.FEATURES:More power capacity:⏹the 125A bypass breakerand the 1000A DC shuntsafely handle the powerfrom larger systems.Expandable:⏹start withthe enclosure and just oneinverter and in the futureexpand to up to threeinverters with ease, usingthe MPX.Labor saving:⏹ panel is pre-wired for fast installation,saving labor costs.Easy installation:⏹all connections are front-mounted, including AC andDC breakers and the MPX.DC load breakers:⏹ fitseither din rail or back-mount DC load breakers.Convenient knockouts:⏹knockouts on the sideof the enclosure arecompatible withcharge controllers.INCLUDES:One DC breaker – 250A⏹One 125A AC bypass breaker⏹1000A/100mv DC shunt⏹Inverter AC input protection⏹MPX extension includes⏹AC/DC circuit protectionand wiringPART NUMBERSThe MPDH shown with four inverters (sold separately), two MPX extensions to accommodate the additional inverters, three backplates, and the Magnum router.The MPDH – M agnum P anel, D ual Enclosure, H igh Capacity – is designed to accommodate a maximum of four inverters with two enclosures – one for AC connections and one for DC connections. FEATURES:More power capacity:⏹the 125A bypass breakerand the 1000A DC shuntsafely handle the powerfrom larger systems.Expandable:⏹start withthe enclosures and justtwo inverters and in thefuture expand to up to fourinverters, using the MPX.Easy installation:⏹all connections are front-mounted, including AC andDC breakers and the MPX.Labor saving:⏹ panel is pre-wired for fast installation,saving labor costs.DC load breakers:⏹ fitseither din rail or back-mount DC load breakers.Convenient knockouts:⏹knockouts on the sideof the enclosures arecompatible withcharge controllers.Separate AC and DC⏹enclosures: for installerswho prefer separateenclosures, the MPDHprovides an easy solution.INCLUDES:Two DC breakers – 250A⏹One 125A AC bypass breaker⏹1000A/100mv DC shunt⏹Inverter AC input protection⏹MPX extension includes⏹AC/DC circuit protectionand wiringPART NUMBERSReading Magnum Panel Part NumbersAvailable Magnum Panel part numbers:MPSL-30D⏹MPSL-60S⏹MPSH-30D⏹MPDH-30D⏹Magnum Panel part numbers follow the same three-part pattern: MPSL-30D, which may be broken down into:MP SL-30D30D30 AAC Double-pole, input circuit breaker(s).x1 for single box or x2 for dual box60S60 AAC Single-pole, input circuit breakerSL Single box, low capacity – includes 60 AAC bypass, 500 ADCshunt and one 250 ADC breaker. Capability for 1-2 invertersSH Single box, high capacity – includes 125 AAC bypass, 1000 ADCshunt and one 250 ADC breaker. Capability for 2-3 invertersDH Dual box, high capacity – includes 125 AAC bypass, 1000 ADCshunt and two 250 ADC breakers. Capability for 2-4 invertersAvailable Magnum Panel Extensionpart numbers:MPX-30D⏹MPX-60S⏹Magnum Panel Extension part numbers follow the same two-part pattern: MPX-30D, which may be broken down into:MPX-30D30D Ships with one 30 AAC Double-pole, input circuit breaker,one 250 ADC breaker, and all AC and DC inverter wiring60S Ships with one 60 AAC Single-pole, input circuit breaker,one 250 ADC breaker, and all AC and DC inverter wiringMPX Magnum Panel Extension Box – 1 unit capacityMini Magnum Panelpart numbers:Mini Magnum Panel part numbers follow the same three-part MMP175-30D30D30 AAC Double-pole, input circuit breaker(s).x1 for single box or x2 for dual box60S60 AAC Single-pole, input circuit breaker175175 ADC breakerPhone: Fax:Web:。
安布雷拉传感器产品技术参数说明说明书
新产品技术参数说明V2021.11.24杭州安布雷拉自动化科技有限公司曾工186****3652目录超声波接近开关(DA-AAF-35RJG) (1)超声波接近开关(DA-AAM38-35R0N) (2)M33水下测距传感器(DE-WLM33-35R0N) (3)HART二线超声波物位计(DYYL-WW-HART) (4)M60水下六路避障传感器(DF-WAM60-20R0N) (5)M100水下六路避障传感器(DG-WAM100-300R0N) (6)水下噪声检测传感器(DI-WA43-BON) (7)TI小型测距传感器(DA-AAGH-40RMG) (8)手持式超声波测深仪(DD-WAP-70MLG) (9)超声波水下通讯传感器(DJ-WAM33-300MRON) (10)六波束超声波传感器(DK-AAM38-50R0N) (11)M30超声波测距传感器(DC-AS30-40RMG) (12)外贴式超声波液位开关(DL-WA-50JOG) (13)超声波五路水下避障传感器(DK-WNB-50R0G) (13)双路超声波传感器(DO-ALN1-15RNG) (15)小型超声波多普勒流速仪(DP-WPB-FR0G) (16)低功耗窨井液位计(DQ-WAB-10NB) (17)六波束超声传感器(DK-WNM70-50R0N) (18)M36水下测距传感器(DE-WNQ-M36-00-RON) (19)科鼎物位计(DC-ALM30M2500MM-RON) (20)M50水下测距传感器(DM-WAM50-R0N) (21)M80水下测距传感器(DM-WAM80-R0N) (22)M33贴片水下测距传感器(DE-WLM33-35R0N) (23)M36水下测距传感器航插款(DE-WNQ-M36-00-RON) (24)十波束超声波测距避障传感器 (25)超声波五路水下避障传感器(DK-WNB-50R0G) (26)超声波接近开关(DA-AAF-35RJG)连接器出线方式。
实验室过氧化氢终末消毒配件需求参数
实验室过氧化氢终末消毒配件需求参数
一、实验室过氧化氢终末消毒配件参数需求
★1、过氧化氢终末消毒配件的购置属于扩展性购买，需与本单位原有的Bioquell Clarus C过氧化氢蒸汽发生器兼容使用。
▲2、1个扩散喷嘴：内置驱动马达，喷嘴过氧化氢气体喷射最小必须大于5米，喷头末端具备连接快接口用于连接主机，喷头可水平360〫旋转，可从两个维度转动。
▲3、1个控制模块：控制面板采用西门子OP7显示屏，通过RS485端口连接主机，模块外壳为304不锈钢材质。
4、带快接头口径1.5英寸的连接管1根、2条数据线（其中连接控制模块与主机的数据线大于9米，连接喷嘴与主机的数据线大于1.5米）。
注：★为必须满足参数、▲为重要参数
说明：
★1是确保购买回来的配件可以与原有的设备兼容使用，因此标注★。
▲2、▲3作为配件中的重要组成部分，也是重要的参数，因此标注▲。
通用对应表
备
注
咪头 3 4 咪头 5 咪头 6 咪头 7 喇叭组件 8 喇叭 9 振动喇叭 10 喇叭 11 受话器 12 机电物料 受话器 13 受话器 14 受话器 15 受话器 16 受话器 17 受话器 18 受话器 手电筒灯 19 手电筒灯 20 21 22 23 24 25 26 27 28 29 30 31 32 主板 33 34 35 36 37 38 39 马达 马达 马达 马达 转轴 转轴M19 鸿景威 滑盖主FPC 滚轮LMA9 B5V-1402-R04 摄像头 摄像头 摄像头 摄像头（共678） GM320MAIN-PCBA LMA20主板 LM678主板 LCM组件 LCM组件 LCM组件 LCM组件 LCM组件 2.4TFT 数据线 数据线 1N4541
附件
59 60 61
耳机 耳机 耳机 耳机 耳机 耳机 耳机 耳机
LM661+ LM690 LM699 LM679/696/658/A8\S8
LM-A3,LM-A7 LMA16
LCS-11 LCS-03 LCS-07 LCE-10
LXE-16 Biblioteka XE-18 LXE-17LMA10 LMQ8
LCS-12
转轴 FPC
摄像头
LCD
LM680/686/689/696/691/691+/660/665/Q7/676/692+/686+/682/ LCS-02 LM662/663/678/668/692/688/661/666/693/679 LCS-05 40 数据线 LM693+,LM-Q5,LM-A8，LMZ16，LM658,LMA6,LMK8,LM663+,LMS5,LM679C,LM662+,LM693C,LMQ5+,LMS8,LM678+,LM681+,LM679+,LM667+,LMS51,LMA4,LMA1,L LXS-08XD 41 数据线 LM667/669/675/A5\S6/669+\A11 LXS-09XD 42 数据线 LMQ8\A6+\ LCS-12 43 数据线 LM690/695 LCS-03 44 数据线 LM699 LCS-07 45 数据线 LMA3,LMA7,LMA16,LMA18 LCS-13 50 耳机 LM680/686/689/660/691/691+/665/Q7/676/692+/686+ LCS-02 51 耳机 LM662/663/678/668/692 LCS-06 52 耳机 LM693+/681/688+/663+Q5\678+\693C\A4\S9 LCE-08 53 耳机 LMK8/A6/Z16/Q5+/681+,LM20,LMA21 LCE-13 54 耳机 LM667/669/675/A5/669+/S5 LCE-09 附件 55 耳机 LMS6 LXE-12XD 56 耳机 LM667+\A6+ LXE-15XD 57 耳机 LMQ8 LCE-14 58 耳机 LMA9 LXE-45
贝利莫 Butterfly 阀门 F6300L 技术数据表说明书
F6300LButterfly Valve with Lug types• Disc 304 stainless steel • Bubble tight shut-off • Resilient seat• Valve face-to-face dimensions comply with API 609 & MSS-SP-67• Completely assembled and tested, ready for installationType overviewType DN F6300L300Technical dataFunctional dataValve size [mm]12" [300]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)-22...250°F [-30...120°C]Body Pressure Rating ANSI Class Consistent with 125, 232 psi CWP Close-off pressure ∆ps 200 psiFlow characteristic modified equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0%Controllable flow range 90° rotation Cv8250 Maximum Velocity 12 FPS Lug threads7/8-9 UNCMaterialsValve body Ductile cast iron ASTM A536Body finish polyester powder coated Stem 420 stainless steel SeatEPDMPipe connection for use with ANSI class 125/150 flanges Bearing Steel, PTFE, Bronze Disc304 stainless steel Gear operator materialsGears - hardened steel Suitable actuatorsNon-Spring PRB(X)Electrical fail-safePKRB(X)F6300L Product featuresFlow/Mounting detailsDimensionsType DN WeightF6300L30091 lb [41 kg]Valve with PRB(X) ActuatorA B C D E F Number of Bolt Holes12.0" [304] 3.1" [78]29.7" [754]20.4" [517]9.2" [234]9.2" [234]12F6300LValve with PKR ActuatorA B C D E F Number of Bolt Holes12.0" [304] 3.2" [82]31.9" [810]22.8" [578]9.2" [234]9.2" [234]12PRBUP-3-TOn/Off, Floating point, Non fail-safe, 24...240 VTechnical dataElectrical data Nominal voltage AC 24...240 V / DC 24...125 VNominal voltage frequency50/60 HzRemark about nominal voltage range AC 19.2...264 V / DC 19.2...137.5 VPower consumption in operation20 WPower consumption in rest position7 WTransformer sizing with 24 V 20 VA / with 240 V 52 VAAuxiliary switch2x SPDT, 1 mA...3 A (0.5 A inductive), DC 5 V...AC250 V (II, reinforced insulation), 1x 10° / 1x0...90° (default setting 85°)Switching capacity auxiliary switch 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V(II, reinforced insulation)Electrical Connection Terminal blocks, (PE) Ground-ScrewOverload Protection electronic thoughout 0...90° rotationFunctional data Direction of motion motor reversible with appManual override7 mm hex crank, suppliedAngle of rotation90°Running Time (Motor)35 s / 90°Noise level, motor68 dB(A)Position indication integral pointerSafety data Power source UL Class 2 SupplyDegree of protection IEC/EN IP66/67Degree of protection NEMA/UL NEMA 4XEnclosure UL Enclosure Type 4XAgency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EU and2014/35/EUQuality Standard ISO 9001Ambient humidity Max. 100% RHAmbient temperature-22...122°F [-30...50°C]Servicing maintenance-freeWeight Weight 6.8 lb [3.1 kg]Materials Housing material Die cast aluminium and plastic casingPRBUP-3-TApplicationOperationProduct featuresPR Series valve actuators are designed with an integrated linkage and visual position indicators. For outdoor applications, the installed valve must be mounted with the actuator at or above horizontal. For indoor applications the actuator can be in any location including directly under the valve.The PR series actuator provides 90° of rotation and a visual indicator shows the position of the valve. The PR Series actuator uses a low power consumption brushless DC motor and is electronically protected against overload. A universal power supply is furnished to connect supply voltage in the range of AC 24...240 V and DC 24...125 V. Included is a smart heater with thermostat to eliminate condensation. Two auxiliary switches are provided; one set at 10° open and the other is field adjustable. Running time is field adjustable from 30...120 seconds by using the Near Field Communication (NFC) app and a smart phone.†Use 60°C/75°C copper wire size range 12...28 AWG, stranded or solid. Use flexible metal conduit. Push the listed conduit fitting device over the actuator’s cable to butt against the enclosure. Screw in conduit connector. Jacket the actuators input wiring with listed flexible conduit. Properly terminate the conduit in a suitable junction box. Rated impulse Voltage 4000 V. Type of action 1. Control pollution degree 3.AccessoriesMechanical accessoriesDescriptionType Hand crank for PR, PKR, PMZG-HND PRElectrical installationMeets cULus requirements without the need of an electrical ground connection.Universal Power Supply (UP) models can be supplied with 24 VAC up to 240 VAC, or 24 VDC upto 125 VDC.Disconnect power.Provide overload protection and disconnect as required.Two built-in auxiliary switches (2x SPDT), for end position indication, interlock control, fanstartup, etc.Actuators may be controlled in parallel. Current draw and input impedance must be observed.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.Wiring diagramsOn/OffPRBUP-3-T Wiring diagramsOn/OffFloating PointAuxiliary SwitchesElectrical installationPRBUP-3-T Dimensions。
Prosonic M FMU40、FMU41、FMU42、FMU44 产品说明书
Products Solutions ServicesSafety Instructions Prosonic M FMU40, FMU41, FMU42, FMU444-20 mA HART, PROFIBUS PA,FOUNDATION FieldbusATEX, IECEx:Ex db [ia] IIC T6...T4 Ga/Gb Ex db [ia] IIC GbXA00176F-F/00/EN/14.22-00715579042022-06-20Prosonic M FMU40, FMU41, FMU42, FMU44XA00176F-F Prosonic M FMU40, FMU41, FMU42, FMU444-20 mA HART, PROFIBUS PA, FOUNDATION FieldbusTable of contentsAbout this document (4)Associated documentation (4)Supplementary documentation (4)Manufacturer's certificates (4)Manufacturer address (5)Other standards (5)Extended order code (5)Safety instructions: General (7)Safety instructions: Special conditions (8)Safety instructions: Installation (8)Safety instructions: Ex d joints (9)Temperature tables (9)Connection data (9)Endress+Hauser3XA00176F-F Prosonic M FMU40, FMU41, FMU42, FMU444Endress+HauserAbout thisdocumentThis document has been translated into several languages. Legally determined is solely the English source text.The document translated into EU languages is available:•In the download area of the Endress+Hauser website: -> Downloads -> Manuals and Datasheets ->Type: Ex Safety Instruction (XA) -> Text Search: …•In the Device Viewer: -> Product tools ->Access device specific information -> Check device features If not yet available, the document can be ordered.Associated documentationThis document is an integral part of the following Operating Instructions:HART:BA00237F/00PROFIBUS PA:BA00238F/00FOUNDATION Fieldbus:BA00239F/00Supplementary documentationExplosion-protection brochure: CP00021Z/11The Explosion-protection brochure is available:•In the download area of the Endress+Hauser website: -> Downloads -> Brochures and Catalogs -> Text Search: CP00021Z •On the CD for devices with CD-based documentation Manufacturer's certificatesEU Declaration of Conformity Declaration Number:EG02007The EU Declaration of Conformity is available:In the download area of the Endress+Hauser website: -> Downloads -> Declaration -> Type: EU Declaration -> Product Code: ...EU type-examination certificate Certificate number:KEMA 02ATEX1006 XProsonic M FMU40, FMU41, FMU42, FMU44XA00176F-F Endress+Hauser 5List of applied standards: See EU Declaration of Conformity.IEC Declaration of Conformity Certificate number:IECEx DEK 11.0014X Affixing the certificate number certifies conformity with the following standards (depending on the device version):•IEC 60079-0 : 2017•IEC 60079-1 : 2014•IEC 60529 : 2013Manufacturer addressEndress+Hauser SE+Co. KG Hauptstraße 179689 Maulburg, Germany Address of the manufacturing plant: See nameplate.Other standardsAmong other things, the following standards shall be observed in their current version for proper installation:•IEC/EN 60079-14: "Explosive atmospheres - Part 14: Electrical installations design, selection and erection"•EN 1127-1: "Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology"Extended order codeThe extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is clearly visible. Additional information about the nameplate is provided in the associated Operating Instructions.Structure of the extended order code FMU4x –*************+A*B*C*D*E*F*G*..(Device type)(Basic specifications)(Optional specifications)* =Placeholder At this position, an option (number or letter) selected from the specification is displayed instead of the placeholders.XA00176F-F Prosonic M FMU40, FMU41, FMU42, FMU446Endress+HauserBasic specifications The features that are absolutely essential for the device (mandatory features) are specified in the basic specifications. The number of positions depends on the number of features available.The selected option of a feature can consist of several positions.Optional specifications The optional specifications describe additional features for the device (optional features). The number of positions depends on the number of features available. The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists of a number or a letter (e.g. J = Test, Certificate). The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate).More detailed information about the device is provided in the following tables. These tables describe the individual positions and IDs in the extended order code which are relevant to hazardous locations.Extended order code: Prosonic M The following specifications reproduce an extract from the product structure and are used to assign:•This documentation to the device (using the extended order code on the nameplate).•The device options cited in the document.Device type FMU40, FMU41, FMU42, FMU44Basic specificationsProsonic M FMU40, FMU41, FMU42, FMU44XA00176F-F Endress+Hauser 7Optional specifications No options specific to hazardous locations are available.Safety instructions:General•The device is intended to be used in explosive atmospheres as defined in the scope of IEC 60079-0 or equivalent national standards. If no potentially explosive atmospheres are present or if additional protective measures have been taken: The device may be operated according to the manufacturer's specifications.•Staff must meet the following conditions for mounting, electrical installation, commissioning and maintenance of the device:•Be suitably qualified for their role and the tasks they perform •Be trained in explosion protection •Be familiar with national regulations •Install the device according to the manufacturer's instructions and national regulations.•Avoid electrostatic charging:•Of plastic surfaces (e.g. enclosure, sensor element, special varnishing, attached additional plates, ..)•Of isolated capacities (e.g. isolated metallic plates)•Refer to the temperature tables for the relationship between the permitted ambient temperature for the electronics enclosure,depending on the range of application and the temperature class.XA00176F-F Prosonic M FMU40, FMU41, FMU42, FMU448Endress+HauserSafety instructions:Special conditionsPermitted ambient temperature range at the electronics enclosure:–40 °C ≤ T a ≤ +60 °C •Observe the information in the temperature tables.•To avoid electrostatic charging: Do not rub surfaces with a dry cloth.•In the event of additional or alternative special varnishing on the enclosure or other metal parts or for adhesive plates:•Observe the danger of electrostatic charging and discharge.•Do not install in the vicinity of processes (≤ 0.5 m) generating strong electrostatic charges.Device type FMU42, FMU44Avoid electrostatic charging of the sensor (e.g. do not rub dry and install outside the filling flow).Safety instructions:Installation1A Zone 11Tank, hazardous area Zone 02Electronic insert 3Enclosure 4Connection compartment (Ex db)5Power supply 6Tank, hazardous area Zone 17Local potential equalizationProsonic M FMU40, FMU41, FMU42, FMU44XA00176F-F Endress+Hauser 9•In potentially explosive atmospheres:•Do not disconnect the electrical connection of the power supply circuit when energized.•Do not open the connection compartment cover when energized.•Only use certified cable entries suitable for the application. Observe national regulations and standards.•When operating the transmitter enclosure at an ambient temperature under –20 °C, use appropriate cables and cable entries permitted for this application.•Continuous service temperature of the connecting cable: ≥ T a +5 K.•When connecting through a conduit entry approved for this purpose,mount the associated sealing unit directly at the enclosure.•Seal unused entry glands with approved Ex db sealing plugs.•Option:•Remote display, e.g. FHX40 (Observe Safety Instructions)•Service interface: Commubox with associated ToF cable (Observe Safety Instructions)Potential equalization Integrate the device into the local potential equalization.Safety instructions: Ex d joints•If required or if in doubt: ask manufacturer for specifications.•Flameproof joints are not intended to be repaired.Temperature tablesZone 1 - Application Observe the permitted temperature range.Connection dataConnection compartment Ex dbXA00176F-F Prosonic M FMU40, FMU41, FMU42, FMU4410Endress+Hauser Option Remote display, e.g. FHX40:Power supply and signal circuit with protection type: intrinsic safety Ex ia IIC, Ex ia IIB.Connecting the Commubox service interface with the associated ToF cable*71557904*71557904。
2SB647L PNP 放电芯片数据手册说明书
2SB647L
PNP Plastic-Encapsulate
Transistor
TO-92L
Maximum Ratings
Symbol
Rating
Rating
Unit
VCEO VCBO VEBO
IC PC RthJA TJ
TSTG
Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation T hermal Resistance Junction to Ambient Operating Junction Temperature
VBE
Base- Emitter Voltage
---
(IC=-150mAdc, VCE=-5Vdc)
fT
Transistor Frequency
---
(IC=-150mAdc, VCE=-5Vdc)
Cob
Collector Output Capacitance
---
(VCB=-10Vdc, IE=0, f=1.0MHz)
Emitter-Base Breakdown Voltage (IE=-10µAdc,IC=0) Collector Cutoff Current
(VCB=-100Vdc, IE=0)
-120 --- --- Vdc -80 --- --- Vdc -5.0 --- --- Vdc --- --- -10 µAdc
• Low Frequency Power Amplifier
• Complementary Pair with 2SD667 • Epoxy meets UL 94 V-0 flammability rating
力传感器参数 堡盟
力传感器参数堡盟
堡盟的力传感器有多种型号，以下是部分型号的参数：
1. DLM20力传感器：最高测力达1 kN，外径为19 ... 26 mm，力范围为
0 ... 1000 N，M4螺纹，M5接头，4针，不锈钢外壳，IP67防护等级，拉杆式、按钮式、螺栓式。
2. DLM30力传感器：最高测力达5 kN，外径为 ... 39 mm，力范围为0 ... 5000N，M6螺纹，M8接头，4针，不锈钢外壳，IP 68防护等级，拉杆式、按钮式、螺栓式。
3. 未提及型号：外径为42 ... 60 mm，力范围为0 ... 20 kN，M12螺纹，
M8接头，4针，不锈钢外壳，IP 68防护等级，拉杆式、按钮式、螺栓式。
4. 未提及型号：外径为155 mm，力范围为0 ... 100 kN，提供带模拟量输出的版本，M30螺纹，M12接头，5针，测量精度为%，热处理钢制外壳，IP65防护等级。
如需更多关于堡盟力传感器的参数信息，建议访问堡盟官网或咨询其官方客服。
Belimo B207 不锈钢球型 Steam 和钢杆阀门
B207•ApplicationStainless Steel Ball and StemTechnical dataFunctional dataValve Size 0.5" [15]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 600 psi Close-off pressure ∆ps 200 psiFlow characteristic equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0% for A – AB Controllable flow range 75°Cv0.3 Body pressure rating note 600 psiCv Flow RatingA-port: as stated in chart B-port: 70% of A – AB Cv MaterialsValve body Nickel-plated brass body Stem seal EPDM (lubricated)SeatPTFEPipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuatorsNon-SpringTR LRB(X)NRSafety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable flow.Flow/Mounting detailsB207 DimensionsDimensional drawingsLRB, LRXA B C D E F H1H29.4" [239] 2.4" [60] 5.2" [132] 4.6" [117] 1.3" [33] 1.3" [33] 1.2" [30] 1.1" [28]TRA B C D E F3.7" [95] 2.4" [60]4.8" [122] 4.2" [107] 1.3" [33] 1.3" [33]TFRB, TFRXA B C D E F6.6" [167] 2.4" [60] 4.9" [124] 4.3" [110] 1.5" [39] 1.5" [39]LFA B C D E F7.9" [200] 2.4" [60] 5.7" [146] 5.1" [129] 1.8" [46] 1.8" [46]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 2.4" [60]7.7" [196]7.0" [179] 3.1" [80] 3.1" [80]A B C D E F7.9" [200] 2.4" [60] 5.7" [146] 5.1" [129] 1.8" [46] 1.8" [46]B207TFRB, TFRXA B C D E F6.6" [167] 2.4" [60] 4.9" [124] 4.3" [110] 1.5" [39] 1.5" [39]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 2.4" [60]7.7" [196]7.0" [179] 3.1" [80] 3.1" [80]LRX120-SR Modulating, Non-Spring Return, AC 100...240 V,for DC 2...10 V or 4...20 mATechnical dataElectrical data Nominal voltage AC 100...240 VNominal voltage frequency50/60 HzPower consumption in operation 2.5 WPower consumption in rest position 1 WTransformer sizing 4 VA (class 2 power source)Electrical Connection18 GA appliance cable, 3ft [1m] 10ft [3m] and 16ft[5m], with 1/2" conduit connector, degree ofprotection NEMA 2 / IP54Overload Protection electronic thoughout 0...90° rotationFunctional data Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mAPosition feedback U 2...10 VDirection of motion motor selectable with switch 0/1Manual override external push buttonAngle of rotation90°Angle of rotation note adjustable with mechanical stopRunning Time (Motor)default 90 s, variable 150, 90, 45, 35 sRunning time motor variable150, 90, 45, 35 sNoise level, motor35 dB(A)Position indication Mechanically, pluggableSafety data Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2 UL Enclosure Type 2Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU; Listed to UL 2043 - suitable for use in airplenums per Section 300.22(c) of the NEC andSection 602.2 of the IMCQuality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]Ambient humidity max. 95% r.H., non-condensingServicing maintenance-freeWeight Weight 1.1 lb [0.50 kg]Electrical installationINSTALLATION NOTESActuators with appliance cables are numbered.LRX120-SRProvide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and input impedance must be observed.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Meets cULus requirements without the need of an electrical ground connection.Warning! Live Electrical Components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to workwith live electrical components. Have a qualified licensed electrician or other individual who has beenproperly trained in handling live electrical components perform these tasks. Failure to follow all electricalsafety precautions when exposed to live electrical components could result in death or serious injury.2...10 V / 4...20 mA Control AC 100...240 V。
汽车电子EMS功放选择
芯佰微电子 低噪声、精密运算放大器 CBM27数据手册说明书
CBM27数据手册专芯发展 • 用芯服务 • 创芯未来www. corebai. com● 宽压供电范围： 8V (±4V)~36V (±18V) ● 低噪声：90 nV p-p （0.1 Hz 至10 Hz ） ● 高速：2.8 V/µs 压摆率、8 MHz 增益带宽 ● 共模抑制比(CMRR)：130 dB (VCM = ±11 V) ● 高开环增益：1,800,000● CBM27A 和 CBM27G 其他产品特点 ● 最大噪声谱密度CBM27A . . . 3.9 nV/√Hz @ 1 kHz Max CBM27G . . . 5.0 nV/√Hz @ 1 kHz Max ● 低输入失调电压CBM27A . . . 26 μV Max CBM27G . . . 100 μV Max ● 低输入失调电压漂移CBM27A . . . 0.2 μV/°C CBM27G . . . 0.4 μV/°C● 电力采集应用系统● 高精密数据采集系统 ● 自动化测试设备（ATE ）● 音频前置放大器 ● 仪器仪表CBM27提供低电平信号出色的低噪声和高精度放大性能。
产品广泛应用于稳定的积分器、精密求和放大器、精密电压阈值检测器、比较器和专业音频电路，如磁头和麦克风前置放大器。
失调电压低至26 μV ，漂移为0.2 μV/°C ，因而该器件是精密仪器仪表应用的理想之选。
极低噪声（10 Hz 时en=3.5nV/√Hz ）, 低1/f 噪声转折频率(2.7Hz)以及高增益(1800V/mV)，能够使低电平信号得到精确的高增益放大。
8 MHz 增益带宽积和2.8 V/µs 压摆率则可以在高速数据采集系统中实现出色的动态精度。
利用偏置电流消除电路，CBM27可实现±10nA 的低输入偏置电流。
输出级具有良好的负载驱动能力。
安捷伦示波器探头选型指南1
1.5 m
10:1 500 MHz
1 MΩ, 6-15 pF
400 V CAT II
5000 系列 (500 MHz) 6000 (300 MHz-1 GHz)、 7000、5464x、54830 和 8000 系列
1.5 m
10:1 150 MHz
1 MΩ, 9-17 pF
400 V CAT II
单端有源探头特性
型号 N2795A N2796A 1157A 1158A
衰减 10:1 10:1 10:1 10:1
探头带宽 1 GHz 2 GHz 2.5 GHz 4 GHz
输入动态范围 0 至 ±8 V 0 至 ±8 V 0 至 ±2.5 V 0 至 ±2.5 V
应用和使用 对数字系统和模拟系统设计执行通用、高速探测
10076B N2771B
电缆长度 衰减 典型探头带宽 补偿示波器输入 最大输入电压 推荐示波器
1.5 m
1:1 20 MHz
高阻抗
400 V CAT II
1000、3000、2000 X、3000 X、5000、6000、 7000、8000、54600 系列
1.3 m
1:1 35 MHz
1 MΩ
衰减
要根据测试信号的幅度和示波 器 垂 直 灵 敏 度 范 围， 选 择 探 头 的 衰 减比 (1:1、10:1、100:1、1000:1)。
带宽 (BW)
探头的额定带宽应与示波器相 匹 配， 并 保 有 对 测 试 信 号 的 裕 量。 但 在 较 高 频 率 时， 地 线 电 感 和 输 入 电容对系统性能的影响比探头带宽 的影响更大。
最大输入电压 (Vmax)
为了确保用户安全，同时帮助用 户保护示波器输入不会受到破坏性电 压的影响及避免探头损坏，所选探头 的额定电压必须高于被测信号。
BERO 接近开关 超声波 安全光栅 光电传感器产品样本
工厂自动化传感器1/2即使在严苛的工况条件下：使用 BERO 超声波式传感器仍能可靠检测。
BERO 超声波式传感器的应用范围几乎不受任何限制。
不管是测量物位、高度或距离或瓶子的计数等，BERO 超声波式传感器可以在 6 cm 至 10m 距离内检测任何种类的物体，甚至包括液体、粉末、有色或透明物体。
检测与表面的性质无关，表面可以粗糙或平滑、清洁或脏污、潮湿或干燥。
检测精确、使用绝对安全：BERO 超声波式传感器结构非常坚固，对脏物、环境光线或噪声不敏感。
直观、精确的检测：使用 BERO 光电式传感器，可轻松实现该传感器具有各种设计形式和类型，可满足所有可能的要求：• 漫射传感器• 带背景抑制的漫射传感器• 后向反射型传感器• 直通光束传感器。
BERO 光电式传感器特别适用于以下领域：• 输送和装卸系统• 机械工程• 造纸、纺织和塑料加工• 印刷技术• 包装技术。
红外光、红光或激光运行，产品系列广泛BERO 光电式传感器的覆盖距离可达 50 m 。
可以通过示教或电位器快速而容易地对BERO 光电式传感器进行设定。
传感器丰富的 BERO 传感器系列总能够为您提供合适的解决方案，而不管您的具体应用如何。
不管是何种自动化任务：BERO 传感器总能“听到”、“看到”、“感觉到”各种事物。
它们可谓是自动化系统的感觉器官。
BERO 传感器1/3技术或非金属？该问题可由BERO 电感式或电容式传感器来解决。
BERO 电感式传感器是用于非接触检测金属物体的一种低成本方法。
它们最适合在汽车工业、机械工程和机器人行业中使用，但也可用于输送和装卸系统，或在造纸和印刷行业中使用。
BERO 电感式传感器性能非常可靠，具有很高的重复精度和长寿命，因为它们工作时没有磨损，并且对温度、噪声、光线和水不敏感。
众多类型传感器涵盖了所有可能的应用，可满足各种需要。
BERO 电容式传感器也是非接触型传感器，用于测量传导和非传导性物料，如固体、粉末或液体等。
balluff bni iol-709-000-k006 bni iol-710-000-k006
BNI IOL-709-000-K006 BNI IOL-710-000-K006IO-Link Sensor-Hub analogUser’s GuideContent1Notes to the user 21.1Structure of the guide 21.2Typographical conventions 2Enumerations 2 Actions 2 Syntax 2 Cross-references 21.3Symbols 21.4Abbreviations 21.5Divergent views 2 2Safety 32.1Intended use 32.2Installation and startup 32.3General safety Notes 32.4Resistance to Aggressive Substances 3Hazardous voltage 3 3Getting Started 43.1Connection overview 43.2Mechanical connection 53.3Electrical connection 53.4Function ground 53.5IO-Link connection 53.6Digital Sensors 63.7Analogue Sensors 6 4IO-Link Interface 74.1IO-Link Data 74.2Process data inputs 74.3Process data outputs 84.4Parameter data/ On-request data 8Identification data 8 Inversion 9 Switch point enable 9 Switch point 94.5Errors 104.6Events 10 5Technical Data 115.1Dimensions 115.2Mechanical data 115.3Electrical data 115.4Operating conditions 115.5Function indicators 12Module LEDs 12 Digital Input LEDs 12 Analogue Input LEDs 12 6Appendix 136.1Type designation code 136.2Order information 13IO-Link Sensor-HubBNI IOL-709-… / BNI IOL-710-…1 Notes to the user1.1 Structure of theguide The Guide is organized so that the sections build on one another. Section 2 : Basic safety information. …………1.2 Typographicalconventions The following typographical conventions are used in this Guide. EnumerationsEnumerations are shown in list form with bullet points.• Entry 1, • Entry 2.Actions Action instructions are indicated by a preceding triangle. The result of an action is indicated by an arrow.Action instruction 1. Action result.Action instruction 2. SyntaxNumbers:Decimal numbers are shown without additional indicators (e.g. 123),Hexadecimal numbers are shown with the additional indicator hex (e.g. 00hex ).Cross-references Cross-references indicate where additional information on the topic can be found.1.3 SymbolsAttention!This symbol indicates a security notice which most be observed.NoteThis symbol indicates general notes.1.4 AbbreviationsBCD BNI CV DPP I-Port EMC FE IOL LSB MSB SP SPDU VVBinary coded switch Balluff Network InterfaceCurrent Version: BNI IOL 709… Direct Parameter Page Digital input portElectromagnetic Compatibility Function ground IO-LinkLeast Significant Bit Most Significant Bit Switch PointService Protocol Data UnitVoltage version: BNI IOL 710…1.5 Divergent views Product views and images can differ from the specified product in this manual. They serve only as an illustration.2 Safety2.1 Intended use The BNI IOL-… is a decentralized sensor input module which is connected to a host IO-Linkmaster over an IO-Link interface.2.2 Installation andstartup Attention!Installation and startup are to be performed by trained technical personnel only. Skilled specialists are people who are familiar with the work such as installation and the operation of the product and have the necessary qualifications for these tasks. Any damage resulting from unauthorized tampering or improper use shall void warranty and liability claims against the manufacturer. The operator is responsible for ensuring that the valid safety and accident prevention regulations are observed in specific individual cases.2.3 General safetyNotes Commissioning and inspectionBefore commissioning, carefully read the User's Guide.The system must not be used in applications in which the safety of persons depends on the function of the device.Intended useWarranty and liability claims against the manufacturer shall be rendered void by damage from:•Unauthorized tampering•Improper use•Use, installation or handling contrary to the instructions provided in this User's Guide.Obligations of the owner/operator!The device is a piece of equipment in accordance with EMC Class A. This device can produce RF noise. The owner/operator must take appropriate precautionary measures against this for its use. The device may be used only with a power supply approved for this. Only approved cables may be connected.MalfunctionsIn the event of defects and device malfunctions that cannot be rectified, the device must be taken out of operation and protected against unauthorized use.Approved use is ensured only when the housing is fully installed.2.4 Resistance toAggressiveSubstances Attention!The BNI modules always have good chemical and oil resistance. When used in aggressive media (such as chemicals, oils, lubricants and coolants, each in a high concentration (i.e. too little water content)), the material must first be checked for resistance in the particular application. No defect claims may be asserted in the event of a failure or damage to the BNI modules caused by such aggressive media..Hazardous voltage Attention!Disconnect all power before servicing equipment.NoteIn the interest of continuous improvement of the product,Balluff GmbH reserves the right to change the technical data of the product and the content of these instructions at any time without notice.IO-Link Sensor-HubBNI IOL-709-… / BNI IOL-710-…3 Getting Started3.1 Connectionoverview1 Mounting hole2 IO-Link interface3 Analogue input-Port 14 Status-LED: Analogue port5 Analogue input port 36 Status-LED: digital input Pin 27 Digital input port 18 Status-LED: Digital port Pin 49 Digital input port 3 10 Status LED “Power Supply”11 Digital input port 212 Digital input port 013 Analogue input port 214 Analogue input port 015 Label16 Status-LED …COM“17 Function ground connection3 Getting Started3.2 Mechanicalconnection The BNI IOL modules are attached using 3 M4 screws (Item 1, Fig. 3-1/3-2).3.3 Electricalconnection The Sensor Hub modules require no separate supply voltage connection. Power is provided through the IO-Link interface by the host IO-Link Master.3.4 Function groundThe modules are provided with a ground terminal.Connect Sensor Hub module to the ground terminal.NoteThe FE connection from the housing to the machine must be low-impedance and as short as possible.3.5 IO-LinkconnectionThe IO-Link connection is made using an M12 connector (A-coded, male).IO-Link (M12, A-coded, male)Pin Function 1Supply voltage, +24 V, max. 1.6 A 2 - 3 GND, reference potential4 C/Q, IO-Link data transmission channelConnection protection ground to FE terminal, if present. Connect the incoming IO-Link line to the Sensor Hub.NoteA standard sensor cable is used for connecting to the host IO-Link Master.IO-Link Sensor-HubBNI IOL-709-… / BNI IOL-710-…3 Getting Started3.6 Digital Sensors Digital input port (M12, A-coded, female)Pin Function 1 +24 V, 100 mA 2 Standard Input 3 0 V, GND 4 Standard Input 5 -NoteFor the digital sensor inputs follow the input guideline per EN 61131-2, Type 2.3.7 AnalogueSensors Analogue input port (M12, A-coded, female)Pin Function1 +24 V, 100 mA2BNI IOL-709...: 4 - 20 mABNI IOL-710…:n.c. 3 0 V, GND4BNI IOL-710...: 0 - 10 V BNI IOL-709…:n.c 5 FE, function groundNoteUnused I/O port sockets must be fitted with cover caps to ensure IP67 protection rating.NoteOvercurrent (> 25mA) on the BNI IOL-709 Module´s inputs can distort the measurement results of the other channels and it may leads to malfunction..4 IO-Link Interface4.1 IO-Link Data Baudrate COM2 (38,4 kBaud)Frame type 1Minimum cycle time 3 msProcess data cycle 30 ms with minimum cycle time4.2 Process datainputs BNI IOL-710-…/BNI IOL-709-…(Sensor-Hub digital/analog)Process data length 10Byte:Byte 0 Byte 17 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0InputPort7Pin4InputPort6Pin4InputPort5Pin4InputPort4Pin4SwitchPoint1Port3SwitchPoint1Port2SwitchPoint1Port1SwitchPoint1PortInputPort7.Pin2InputPort6.Pin2InputPort5.Pin2InputPort4.Pin2SwitchPoint2Port3SwitchPoint2Port2SwitchPoint2Port1SwitchPoint2PortByte 2 Byte 37 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0Error1Error2Error3MSBAnalogue valueLSBPort 0Byte 4 Byte 57 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0Error1Error2Error3MSBAnalogue valueLSBPort 1Byte 6 Byte 77 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0Error1Error2Error3MSBAnalogue valueLSBPort 2Byte 8 Byte 97 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0Error1Error2Error3MSBAnalogue valueLSBPort 3IO-Link Sensor-HubBNI IOL-709-… / BNI IOL-710-…4 IO-Link InterfaceInput: Input-Signal at Port and PinSwitch Point: The switch point bits show a switch pointoverrun. The switch point can be configuredby parameter ( see 0.0 - “Switch pointenable” and 0.0 - “Switch point”)Analogue value: VV: actual voltage value between0 and 1056 (1Bit = 0.01V)CV: actual current value between0 and 2150 (1Bit = 0.01mA)Error:• Error 1 • Error 2 • Error 3 Overcurrent/short circuit on sensor supply Measurement range overflow Measurement range undercut (only CV)4.3 Process dataoutputsThere are no outputs at BNI IOL-710-... and BNI IOL-709-... modules.4.4 Parameter data/On-request dataDPP SPDU Parameter DatawidthAccess Index Index Sub-indexIdentificationData07hex Vendor ID 2 ByteReadonly 08hex09hex Device ID 3 Byte0A hex0B hex10hex0 Vendor Name 8 Byte11hex0 Vendor text 16 Byte12hex0 Product Name 34 Byte13hex0 Product ID 21 Byte14hex0 Product text 34 Byte16hex Hardware Revision 3 Byte17hex0 Firmware Revision 3 ByteIdentification data Type Device ID VersionBNI IOL-710-000-K006 050201hex Voltage versionBNI IOL-709-000-K006 050202hex Current version4 IO-Link InterfaceDPPSPDUParameter Data width Value rangeDefault- valueIndex Index Sub-index P a r a m e t e r D a t a10hex 40hex640 1-16 Inversion 2 Byte 0000hex …FFFF hex 0000hex 11hex 12hex 41hex650 1-8 Switch point enable 1 Byte 00hex …FF hex 00hex 42hex660 Switch point 1 Port 0 2 Byte 0000hex … 03E8hex 0000hex 43hex670 Switch point 1 Port 1 2 Byte 0000hex … 03E8hex 0000hex 44hex680 Switch point 1 Port 2 2 Byte 0000hex … 03E8hex 0000hex 45hex690 Switch point 1 Port 3 2 Byte 0000hex … 03E8hex 0000hex 46hex700 Switch point 2 Port 0 2 Byte 0000hex … 03E8hex 0000hex 47hex710 Switch point 2 Port 1 2 Byte 0000hex … 03E8hex 0000hex 48hex720 Switch point 2 Port 2 2 Byte 0000hex … 03E8hex 0000hex 49hex73Switch point 2 Port 32 Byte0000hex … 03E8hex0000hexInversionInversion of the input signals:Byte 0Byte 176543217654321I n v e r s i o n P o r t 7 P i n 4I n v e r s i o n P o r t 6 P i n 4I n v e r s i o n P o r t 5 P i n 4I n v e r s i o n P o r t 4 P i n 4I n v e r s i o n S P 1 P o r t 3I n v e r s i o n S P 1 P o r t 2I n v e r s i o n S P 1 P o r t 1I n v e r s i o n S P 1 P o r t 0I n v e r s i o n P o r t 7 P i n 2I n v e r s i o n P o r t 6 P i n 2I n v e r s i o n P o r t 5 P i n 2I n v e r s i o n P o r t 4 P i n 2I n v e r s i o n S P 2 P o r t 3I n v e r s i o n S P 2 P o r t 2I n v e r s i o n S P 2 P o r t 1I n v e r s i o n S P 2 P o r t 0Switch point enableEnable the switch points by setting the enable bitsByte 07654321E n a b l e s w i t c h p o i n t 2 P o r t 3E n a b l e s w i t c h p o i n t 2 P o r t 2E n a b l e s w i t c h p o i n t 2 P o r t 1E n a b l e s w i t c h p o i n t 2 P o r t 0E n a b l e s w i t c h p o i n t 1 P o r t 3E n a b l e s w i t c h p o i n t 1 P o r t 2E n a b l e s w i t c h p o i n t 1 P o r t 1E n a b l e s w i t c h p o i n t 1 P o r t 0Switch pointByte 0Byte 1 7 6 5 4 3217654321Switch pointValue range (dec) CV= 400...2000 VV= 0 (1000)BNI IOL-709-… / BNI IOL-710-…4 IO-Link Interface4.5 Errors Byte 0Byte 1Device application error: 80hex11hex Index not available 12hex Subindex not available 30hex Value out of range4.6 EventsClass/QualifierCode (high + low)Mode Type InstanceP a r a m e t e r D a t aappears Error AL Device Hardware supply Supply low voltage U2 = supply + 24VC0hex 30hex 03hex 5000hex 0100hex 0010hex 0002hex F3hex5112hex disappears ErrorAL Device Hardware supply Supply low voltage U2 = supply + 24V80hex 30hex 03hex 5000hex 0100hex 0010hex 0002hexB3hex 5112hexappears Error AL Device Hardware supply supply peripheryC0hex30hex 03hex 5000hex 0100hex0060hexF3hex 5160hexdisappears ErrorAL Device Hardware supply supply periphery80hex30hex 03hex5000hex0100hex0060hexB3hex5160hex5 Technical Data5.1 Dimensions5.2 Mechanical data Housing Material Plastic, transparentIO-Link-Port M12, A-coded, maleInput-Ports 8x M12, A-coded, femaleEnclosure rating IP67 (only when plugged-in and threaded-in)Weight 90 gDimensions(L × W × H, excluding connector)115 × 50 × 30,8 mm5.3 Electrical data Operating voltage 18 ... 30,2 V DC, per EN 61131-2Ripple < 1 %Current draw without load ≤ 40 mA5.4 Operatingconditions Operating temperature -5 °C … +55 °C Storage temperature -25 °C … +70 °CBNI IOL-709-… / BNI IOL-710-…5 Technical Data5.5 FunctionindicatorsModule LEDs LED 5, IO-Link CommunicationStatus FunctionGreen No CommunicationGreen negative pulsed Communication OKRed Communication line overloadOff Module unpoweredLED 4, Power supply statusStatus FunctionGreen Module power is OKGreen slowly flashing Short circuitGreen rapidly flashing Module power supply < 18 VOff Module unpowered Digital Input LEDs LED 3, Input Pin 4 and LED 2, Input Pin 2Status FunctionYellow Input signal = 1Off Input signal = 0Analogue Input LEDs LED 1, Analogue input portStatus Signal 709 (4-20 mA) Signal 710 (0-10 V) Green ≥ 4 mA - ≤ 20 mA> 0,05 VRed < 4 mA - > 20 mA > 10,05 V6 Appendix6.1 Type designationcode6.2 OrderinformationType Order CodeBNI IOL-709-000-K006 BNI0007BNI IOL-710-000-K006 BNI0008BNI IOL-7xx-000-K006 Balluff Network InterfaceIO-Link interfaceFunctions710 = 8 digital inputs 0,15 A + 4 analog inputs 0 - 10 V709 = 8 digital inputs 0,15 A + 4 analog inputs 4 - 20 mAVariant000 = StandardvarianteMechanical configurationK006 =Plastic housing,Connectors:- BUS and Power supply: 1x M12x1, external thread- Input ports: 8x M12x1, internal threadBNI IOL-709-… / BNI IOL-710-… NotesBalluff GmbHSchurwaldstrasse 973765 Neuhausen a.d.F. GermanyTel. +49 7158 173-0 N r . 910442-726 E •01.125277 • E d i t i o n K 17 • R e p l a c e s E d i t i o n 1311 • S u b j e c t t o m o d i f i c a t i o n。
Belimo NM24A-KNX 通信式阀门驱动器
NM24A-KNXCommunicative damper actuator for adjustingdampers in technical building installations• Torque motor 10 Nm• Nominal voltage AC/DC 24 V• Control communicative• Communication via KNX (S-Mode)• Conversion of sensor signalsTechnical dataElectrical data Nominal voltage AC/DC 24 VNominal voltage frequency50/60 HzNominal voltage range AC 19.2...28.8 V / DC 21.6...28.8 VPower consumption in operation 3.5 WPower consumption in rest position 1.4 WPower consumption for wire sizing 6 VAConnection supply / control Cable 1 m, 6x 0.75 mm²Data bus communication Communicative control KNX (S-Mode)Number of nodes max. 64 per line segment, reduce number ofnodes with connecting cable with short linesCommunication medium KNX TPConfiguration mode S-ModeCurrent consumption of KNX-Bus max. 5 mAFunctional data Torque motor10 NmTorque variable25%, 50%, 75% reducedPosition accuracy±5%Direction of motion motor selectable with switch 0/1Direction of motion note Y = 0%: At switch position 0 (ccw rotation) / 1(cw rotation)Direction of motion variable electronically reversibleManual override with push-button, can be lockedRunning time motor150 s / 90°Running time motor variable43...173 sAdaptation setting range manualAdaptation setting range variable No actionAdaptation when switched onAdaptation after pushing the manual overridebuttonOverride control, controllable via bus communication MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position) = 50%Override control variable MAX = (MIN + 32%)...100%MIN = 0%...(MAX – 32%)ZS = MIN...MAXSound power level, motor35 dB(A)Parametrisation with service tool ZTH EUFast addressing 1...16 via push button possibleFunctional dataMechanical interface Universal shaft clamp 8...26.7 mm Position indicationMechanical, pluggableSafety dataProtection class IEC/EN III, Safety Extra-Low Voltage (SELV)Degree of protection IEC/EN IP54EMCCE according to 2014/30/EUCertification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14Hygiene testAccording to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission Type of actionType 1Rated impulse voltage supply / control 0.8 kV Pollution degree 3Ambient humidity Max. 95% RH, non-condensing Ambient temperature -30...50°C [-22...122°F]Storage temperature -40...80°C [-40...176°F]Servicingmaintenance-free WeightWeight 0.77 kg•••••••Safety notesThis device has been designed for use in stationary heating, ventilation and air-conditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or aggressive gases interfere directly with the device and that it is ensured that the ambient conditions remain within the thresholds according to the data sheet at any time.Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied with during installation.The device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user.Cables must not be removed from the device.To calculate the torque required, the specifications supplied by the damper manufacturers concerning the cross-section and the design, as well as the installation situation and the ventilation conditions must be observed.The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.Product featuresOperating mode The actuator is equipped with an integrated interface for KNX (S-Mode) and can be connected with all KNX devices that have corresponding data points available.Converter for sensors Connection option for a sensor (passive or active sensor or switching contact). In this way, the analogue sensor signal can be easily digitised and passed along to KNX.Parametrisable actuatorsThe factory settings cover the most common applications. As desired, individual parameters can be adapted for specific systems or servicing with a service tool (e.g. ZTH EU) or the ETS planning and commissioning tool.Simple direct mountingSimple direct mounting on the damper shaft with a universal shaft clamp, supplied with an anti-rotation device to prevent the actuator from rotating.Manual overrideManual override with push-button possible (the gear train is disengaged for as long as the button is pressed or remains locked).Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.High functional reliabilityThe actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.Home positionThe first time the supply voltage is switched on, i.e. at the time of commissioning, the actuator carries out a synchronisation. The synchronisation is in the home position (0%).The actuator then moves into the position defined by the control signal.Adaptation and synchronisationAn adaptation can be triggered manually by pressing the "Adaptation" button or with the PC-Tool. Both mechanical end stops are detected during the adaptation (entire setting range).Automatic synchronisation after pressing the manual override button is configured. The synchronisation is in the home position (0%).The actuator then moves into the position defined by the control signal.A range of settings can be adapted using the PC-Tool (see MFT-P documentation)AccessoriesElectrical accessoriesDescriptionType Auxiliary switch 1x SPDT add-on S1A Auxiliary switch 2x SPDT add-onS2A Feedback potentiometer 140 Ω add-on P140A Feedback potentiometer 1 kΩ add-on P1000A Feedback potentiometer 10 kΩ add-onP10000A Mechanical accessoriesDescriptionType Actuator arm for standard shaft clamp (one-sided)AH-25Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm AV8-25Ball joint suitable for damper crank arm KH8KG8Ball joint suitable for damper crank arm KH8 / KH10KG10A Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm KH8Shaft clamp one-sided, clamping range ø8...26 mm with insert, Multipack 20 pcs.K-ENMA Shaft clamp one-sided, clamping range ø8...26 mm, Multipack 20 pcs.K-ENSA Shaft clamp reversible, clamping range ø8...20 mm K-NA Form fit insert 8x8 mm, Multipack 20 pcs.ZF8-NMA Form fit insert 10x10 mm, Multipack 20 pcs.ZF10-NSA Form fit insert 12x12 mm, Multipack 20 pcs.ZF12-NSA Form fit insert 15x15 mm, Multipack 20 pcs.ZF15-NSA Form fit insert 16x16 mm, Multipack 20 pcs.ZF16-NSA Mounting kit for linkage operation for flat installation ZG-NMA Anti-rotation mechanism 180 mm, Multipack 20 pcs.Z-ARS180Baseplate extension for NM..A to NM..Z-NMA Position indicator, Multipack 20 pcs.Z-PI ToolsDescriptionType Service tool, with ZIP-USB function, for parametrisable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH EUBelimo PC-Tool, Software for adjustments and diagnostics MFT-P Adapter for Service-Tool ZTHMFT-C Connecting cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socketZK1-GEN Connecting cable 5 m, A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminalZK2-GENNM24A-KNXWire colours:1 = black 2 = red 3 = white 5 = orange 6 = pink 7 = greyFunctions:D+ = KNX+ (pink > red)D- = KNX- (grey > black)The connection to the KNX line should take place via WAGO connecting terminals 222/221.Electrical installationSupply from isolating transformer.Wiring diagramsConnection without sensorConnection with passive sensor, e.g. Pt1000, Ni1000, NTC1) depending on type 2) Resolution 1 OhmCompensation of the measured value is recommendedConnection with switching contact, e.g. Δp monitor switchSwitching contact requirements: The switching contact must be able to switch a current of 16 mA at 24 V accurately.NM24A-KNXConnection with active sensor, e.g. 0...10 V @ 0...50°CPossible voltage range: 0...32 V Resolution 30 mV• Switching current 16 mA @ 24 V• Start point of the operating range must be parametrised on the MP actuator as ≥0.5 VElectrical installationNM24A-KNX KNX group objectsNM24A-KNX KNX group objects (continuation)NM24A-KNX KNX parametersKNX workflowsProduct database The product database for the import in ETS4 or higher is available at the Belimo website.Setting physical address The programming of the physical address takes place by ETS and the programming button onthe device.If the programming button is not accessible or accessible only with difficulty, then the addresscan be set using a point-to-point connection: "Overwrite Individual Address: 15.15.255"As a third possibility, the physical address can be programmed on the basis of the KNX seriesnumber (e.g. with Moov’n’Group). The KNX series number is placed on the device in twoversions. One sticker can be removed for adhesion on the commissioning journal, forexample.Firmware upgrade The KNX firmware of the device is updated automatically with the programming of theapplication program if the product database has a more recent version.The first programming procedure takes somewhat longer in such cases (>1 min).Resetting to KNX factory settings If necessary, the device can be reset manually to the KNX factory settings (physical address,group address, KNX parameters).For the reset, the programming button on the device must be pressed down for at least 5 sduring start-up.NM24A-KNXOperating controls and indicators1Direction of rotation switch Switch over:Direction of rotation changes2Push-button and LED display green Off:No power supply or malfunction On:In operationPress button:Triggers angle of rotation adaptation, followed by standard mode3Push-button and LED display yellow Off:The actuator is readyOn:Adaptation or synchronisation process active or actuator in programming mode (KNX)Flashing:Connection test (KNX) activePress button:In operation (>3 s): Switch the programming mode on and off (KNX)When starting (>5 s): Reset to factory setting (KNX)4Manual override button Press button:Gear train disengages, motor stops, manual override possible Release button:Gear train engages, synchronisation starts, followed by standard mode5Service plugFor connecting parametrisation and service toolsServiceQuick addressing1. Press the "Address" button until the green "Power" LED is no longer illuminated. The green "Power" LED flashes in accordance with the previously set address.2. Set the address by pressing the "Address" button the corresponding number of times (1...16).3. The green LED flashes in accordance with the address that has been entered (1...16). If the address is not correct, it can be reset in accordance with step 2.4. Confirm the address setting by pressing the green "Adaptation" button.If the address is not confirmed within 60 seconds, the address procedure will be ended. Any address change that has already been started will be discarded.The resulting BACnet MS/TP and Modbus RTU address is made up of the set basic address plus the short address (e.g. 100+7=107).Tool connectionThe actuator can be parametrised by ZTH EU via the service socket.For an extended parametrisation the PC tool can be connected.NM24A-KNXDimensionsSpindle lengthMin. 40Min. 20Clamping range*Option: Shaft clamp mounted below(accessories K-NA needed)Further documentation• Tool connections• General notes for project planningApplication notes• For digital control of actuators in VAV applications patent EP 3163399 must be considered.。
西门子SIMATIC S7-400 CPU 414-3 PN DP 产品说明书
6ES7414-3EM05-0AB0
SIMATIC S7-400, CPU 414-3 PN/DP CENTRAL PROCESSING UNIT WITH: 2.8 MB WORKING MEMORY, (1,4 MB KB CODE, 1,4 MB DATA), INTERFACES: 1. IF MPI/DP 12 MBIT/S(X1), 2. IF ETHERNET/PROFINET (X5) 3. IF IF964-DP PLUGGABLE (IF1)
03/29/2017
Subject to change without notice © Copyright Siemens
Power loss Power loss, typ. Power loss, max.
Memory Work memory ● integrated ● integrated (for program) ● integrated (for data) ● expandable Load memory ● expandable FEPROM ● expandable FEPROM, max. ● integrated RAM, max. ● expandable RAM ● expandable RAM, max. Backup ● present ● with battery ● without battery
Nesting depth ● per priority class ● additional within an error OB
Counters, timers and their retentivity S7 counter ● Number Retentivity — adjustable — lower limit — upper limit — preset Counting range — lower limit — upper limit IEC counter ● present ● Type ● Number S7 times ● Number Retentivity — adjustable — lower limit — upper limit — preset Time range — lower limit
威纶触摸屏MT6071iE1 7寸屏选型说明书
显示显示器7” TFT LCD 分辨率 (WxH dots)800 x 480 亮度 (cd/m 2) 350 对比度 500:1 背光类型 LED背光寿命 >30,000 小时显示色彩 16M 触控面板 类型四线电阻式触控精度 动作区长度(X)±2%, 宽度(Y)±2%存储器 闪存 (Flash) 128 MB 内存 (RAM) 128 MB处理器32 bits RISC Cortex A8 600MHzI/O 端口 USB Host USB 2.0 x 1 USB Client USB 2.0 x 1以太网络 无串行接口 COM1: RS-232, COM2:RS-485 2w/4w, COM3: RS-485 2w万年历内置 电源输入电源 24±20%VDC电源隔离 内置功耗 350mA@24VDC 耐电压 500VAC (分钟)绝缘阻抗 Exceed 50M @ 500VDC耐震动 10 to 25Hz(X,Y ,Z 轴向 2G 30分钟)规格外壳材质工程塑料外形尺寸WxHxD 200.4x146.5x35mm 开孔尺寸 (mm) 192 x 138mm重量 (kg) 约 0.6 kg 操作环境防护等级NEMA4 / IP65 储存环境温度 -20°~60°C (-4° ~ 140°F) 操作环境温度 0° ~ 50°C (32° ~ 122°F)相对环境湿度 10% ~ 90% RH (非冷凝)PCB 涂层 无认证 CE 符合CE 认证标准软件EasyBuilder Pro V4.10.04或更新版本7" TFT 触控屏人机界面特点● 7" 800x480 TFT LCD, LED 背光 ● 无风扇冷却系统● USB Client 可用于下载工程档案● COM2及 COM3 [RS485] 支持 MPI 187.5K ，同时间请择一使用● NEMA4/IP65 前面板防护等级 ●内置电源隔离weintek labs官网HMI代理商统一热线4006-022-002脚位定义COM1 [RS232] 9 Pin, Male, D-subPIN# Symbol COM1 [RS232] 1 Not used2 RxD Received Data3 TxD Transmitted Data4 Not used5 GND Ground6 Not used7 RTS Ready to send output 8 CTS Clear to send input 9Not usedCOM2 / COM3 [RS485] 9 Pin, Female, D-subPIN# Symbol Com2[RS485]2w Com2[RS485]4w Com3 [RS485] 1 Rx- Data- Rx- 2 Rx+ Data+ Rx+ 3 Tx- Tx- 4 Tx+ Tx+ 5 GND Ground 6 Data- Data- 7 Not used 8 Not used9Data+Data+ 7.4mm [0.29"]22.65mm [0.89"]4.95mm [0.20"]200.4mm [7.89"]146.5m m [5.77"]189.6mm [7.46"]135.6m m [5.34"]MT6071iE:192mm [7.559"] W x 138mm [5.433"] H192mm [7.56"]138m m [5.43"]abgfe d c 35m m [1.38"]a. 指拨开关b. 保险丝c. 电源接口d. COM2 RS485 2W/4W, COM3 RS485 2W e USB Client f USB Host g. COM1 RS232订购信息MT6071iE1:7" 800x480 TFT LCD HMI, 内置 128MB Flash / 128MB DDR2 RAM on board.weintek labs官网HMI代理商统一热线4006-022-002**************北京上海深圳天津。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
System Memory
204-pin Dual Channel DDR3 1066/1333/1600 MHz SODIMM x 2, up to 8GB
Chipset
Intel® Core i7/i5 QM67
Ethernet
10/100/1000Base-TX, RJ-45 x 2
Audio
EMB-QM67
Embedded Motherboard With Socket G2 (rPGA988B) 2nd Generation for Intel® Core™ i7/ i5/ Celeron® QC/ DC Processors Up to 45W
Features
Socket G2 (rPGA988B) 2nd Generation for Intel® Core™ i7/ i5/ Celeron® QC/ DC Processors Up to 45W Intel® QM67 204-pin Dual-Channel DDR3 1066/1333/1600 MHz SODIMM x 2, Up to 8 GB Gigabit Ethernet x 2 Intel® Integrated Graphics Engine Supports Dual View by VGA, DVI, HDMI, LVDS HD Audio SATA 3.0 Gb/s x 2, Support RAID 0,1,5,10 USB 2.0 x 8, COM x 6 PCI-Express [x4] x 1, Mini PCI-Express x 1, CFast x 1, TPM x 1 (Optional) Reserve USB3.0 Layout for Future Usage (USB 3.0 connector x4)
KB & Mouse
Keyboard x 1, Mouse x 1
Universal Serial Bus USB 2.0 x 8 (four with pin headers, four with USB 3.0 connectors)
Audio
Audio Jack x 3 ( Mic-in, Line-in, Line-out)
MTBF (Hours)
70,000
Display
Chipset
Intel® Core i7/i5 + QM67
Graphic Engine
2nd Generation Intel® Core™ i7 / i5 / Celeron® integrated Gfx Gen 5.75 graphics
Resolution
• TF-EMB-QM67-A10-01
Mini-ITX, Intel® QM67 Chipset, VGA, DVI, HDMI, 24bit-LVDS, 2 Gigabit Ethernet, Audio, 6 COM, 8 USB, 4 SATA, CFast, DC12V, Rev.A1.0
Gross Weight
1.32 lb (0.6Kg)
Operating Temperature 32°F~140°F (0°C~60°C)
Storage Temperature -4°F~158°F (-20°C~70°C)
Operating Humidity 5% ~ 95% relative humidity, non-condensing
Expansion Interface PCI-E[x4] x 1, Mini-PCIe socket x 1, CFast x 1, TPM Module x 1 (Optional)
Power Requirement ATX
Dimension (W x H x D) 6.7" x 6.7" (170mm x 170mm)
SSD
CompactFlash™ Type II socket x 1
DIO
8-bit Programmable
Watchdog Timer
Reset: 1 sec. ~ 255 min. and 1 sec. or 1 min./step
H/W Status Monitor Monitoring system temperature, voltage, and cooling fan status
HD Audio Realtek ALC 892 Codec with phone Jack
BIOS
AMI BIOS 64Mbit SPI ROM
I/O Chip
ITE IT8728F+ Fintek F81216DG
Storage
SATA 6.0 Gb/s x 2 , SATA 3.0 Gb/s x 2
Up to 2048x1536 @ 60 Hz for CRT Up to 1366 x 768 @ 60 Hz for LCD
Output Interface
DB-15 x 1, DVI-D x 1, HDMI x 1, LVDS x 1
I/O
Serial Port
RS-232 x 5 (box headers) RS-232/422/485 x 1, supports 5/12V on the 9th (on I/O)
Packing List
• TBD
Ordering Information
• TF-EMB-QM67-A10
Mini-ITX, Intel® QM67 Chipset, VGA, DVI, HDMI, 24bit-LVDS, 2 Gigabit Ethernet, Audio, 6 COM, 8 USB, 4 SATA, CFast, ATX, Rev.A1.0
Optional Accessories
• TBD
05-12
Specificaactor
Mini-ITX motherboard
Processor
Socket G2 (rPGA988B) 2nd Generation for Intel® Core™ i7 / i5 / Celeron® QC / DC processor, U to 45W