浆砌卵石贴面施工工艺流程

浆砌卵石贴面施工工艺流程
English Answer:
1. Preparation.
Clean the surface to be veneered and remove any debris or loose material.
Ensure that the surface is level and has a uniform texture.
Apply a bonding agent to the surface, ensuring that it is applied evenly and in accordance with the manufacturer's instructions.
2. Laying the Pebbles.
Spread a layer of pebbles over the surface, ensuring that they are evenly distributed and do not overlap.
Press the pebbles firmly into the bonding agent until they are secure.
Use a level to ensure that the pebbles are laid evenly.
3. Grouting.
Prepare the grout according to the manufacturer's instructions.
Apply the grout to the pebbles, ensuring that it fills all the gaps between them.
Use a float to smooth the grout and remove any excess.
4. Curing.
Allow the grout to cure according to the manufacturer's instructions.
Keep the surface moist during the curing process to prevent the grout from cracking.
5. Cleaning.
Once the grout has cured, use a damp sponge to clean the surface and remove any excess grout or debris.
Allow the surface to dry completely before using it.
Chinese Answer:
1. 准备工作。

清洁待贴面表面，去除任何碎屑或松散材料。

确保表面平整，纹理均匀。

在表面涂抹粘合剂，确保均匀涂抹，并按照制造商的说明进行操作。

2. 铺设卵石。

在表面铺设一层卵石，确保它们均匀分布且不重叠。

将卵石压入粘合剂中，直到它们固定。

使用水平仪确保卵石平整铺设。

3. 灌浆。

按照制造商的说明准备灌浆料。

将灌浆料涂抹到卵石上，确保填满它们之间的所有缝隙。

使用抹子将灌浆料抹平并去除多余部分。

4. 养护。

按照制造商的说明让灌浆料固化。

在固化过程中保持表面湿润，防止灌浆料开裂。

5. 清洁。

灌浆料固化后，使用湿海绵清洁表面，去除多余的灌浆料或碎
屑。

在使用表面之前，让其完全干燥。