MM3Z6V8T1中文资料 - 360文档中心

ZMM6.8中文资料

FEATURES♦Silicon Planar Zener Diodes♦In Mini-MELF case especially for automatic insertion.♦The Zener voltages are graded according to the international E 24 standard. Smaller voltagetolerances and other Zener voltages are available upon request.♦These diodes are also available in DO-35 case with the type designation ZPD1 … ZPD51.MECHANICAL DATACase:Mini-MELF Glass Case (SOD-80)Weight:approx. 0.05 gMAXIMUM RATINGSRatings at 25°C ambient temperature unless otherwise specified.SYMBOL VALUE UNITZener Current (see Table “Characteristics”)Power Dissipation at T amb = 25°C P tot 500(1)mW Junction Temperature T j 175°C Storage Temperature RangeT S– 55 to +175°CZENER DIODES.142 (3.6).019 (0.48)∅Cathode Mark.063 (1.6).134 (3.4).055 (1.4).011 (0.28)Dimensions are in inches and (millimeters)ZMM1(3)0.7 ... 0.8 6.5 (< 8)< 50– 26 ... – 23–280340ZMM2.7 2.5 ... 2.975 (< 83)< 500– 9 ... – 4–135160ZMM3 2.8 ... 3.280 (< 95)< 500– 9 ... – 3–117140ZMM3.3 3.1 ... 3.580 (< 95)< 500– 8 ... – 3–109130ZMM3.6 3.4 ... 3.880 (< 95)< 500– 8 ... – 3–101120ZMM3.9 3.7 ... 4.180 (< 95)< 500– 7 ... – 3–92110ZMM4.3 4.0 ... 4.680 (< 95)< 500– 6 ... – 1–85100ZMM4.7 4.4 ... 5.070 (< 78)< 500– 5 ... +2–7690ZMM5.1 4.8 ... 5.430 (< 60)< 480– 3 ... +4> 0.86780ZMM5.6 5.2 ... 6.010 (< 40)< 400– 2 ... +6> 15970ZMM6.2 5.8 ... 6.6 4.8 (< 10)< 200– 1 ... +7> 25464ZMM6.8 6.4 ... 7.2 4.5 (< 8)< 150+2 ... +7> 34958ZMM7.57.0 ... 7.9 4 (< 7)< 50+3 ... +7> 54453ZMM8.27.7 ... 8.7 4.5 (< 7)< 50+4 ... +7> 64047ZMM9.18.5 ... 9.6 4.8 (< 10)< 50+5 ... +8> 73643ZMM109.4 ... 10.6 5.2 (< 15)< 70+5 ... +8> 7.53340ZMM1110.4 ... 11.6 6 (< 20)< 70+5 ... +9> 8.53036ZMM1211.4 ... 12.77 (< 20)< 90+6 ... +9> 92832ZMM1312.4 ... 14.19 (< 25)< 110+7 ... +9> 102529ZMM1513.8 ... 15.611 (< 30)< 110+7 ... +9> 112327ZMM1615.3 ... 17.113 (< 40)< 170+8 ... +9.5> 122024ZMM1816.8 ... 19.118 (< 50)< 170+8 ... +9.5> 141821ZMM2018.8 ... 21.220 (< 50)< 220+8 ... +10> 151720ZMM2220.8 ... 23.325 (< 55)< 220+8 ... +10> 171618ZMM2422.8 ... 25.628 (< 80)< 220+8 ... +10> 181316ZMM2725.1 ... 28.930 (< 80)< 250+8 ... +10> 201214ZMM3028 ... 3235 (< 80)< 250+8 ... +10> 22.51013ZMM3331 ... 3540 (< 80)< 250+8 ... +10> 25912ZMM3634 ... 3840 (< 90)< 250+8 ... +10> 27911ZMM3937 ... 4150 (< 90)< 300+10 ... +12> 29810ZMM4340 ... 4660 (< 100)< 700+10 ... +12> 3279.2ZMM4744 ... 5070 (< 100)< 750+10 ... +12> 3568.5ZMM5148 (54)70 (< 100)< 750+10 ... +12> 3867.8ZMM5652.0 … 60.0(4)<135(4)<1000(5)typ. +10(4)–––ZMM6258.0 … 66.0(4)<150(4)<1000(5)typ. +10(4)–––ZMM6864.0 … 72.0(4)<200(4)<1000(5)typ. +10(4)–––ZMM7570.0 … 79.0(4)<250(4)<1500(5)typ. +10(4)–––NOTES:(1) Tested with pulses t p = 5 ms(2) Valid provided that electrodes are kept at ambient temperature(3) The ZMM1 is a silicon diode operated in forward direction. Hence, the index of all parameters should be “F” instead of “Z”Connect the cathode electrode to the negative pole (4) at I Z = 2.5 mA (5) at I Z = 0.5 mAELECTRICAL CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.TypeZener Voltage (1)at I Z = 5 mAV Z Vat I Z = 5 mA f = 1 kHz r zj Ωat I Z = 1 mA f = 1 kHz r zj ΩTemp. Coeff.of Zener Voltageat I Z = 5 mA αVZ 10–4/K Reverse Voltage atI R = 100 nAV R V atT amb = 45°C I Z = mA Admissable Zener current (2)atT amb = 25°C I Z = mA Dynamic Resistance。

MM5Z6V8ST1中文资料

MM5Z2V4ST1 SERIES Zener Voltage Regulators100 mW SOD−523 Surface MountThis series of Zener diodes is packaged in a SOD−523 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.Specification Features•Standard Zener Breakdown V oltage Range −2.4 V to 9.1 V •Steady State Power Rating of 100 mW •Small Body Outline Dimensions:0.047″ x 0.032″(1.20 mm x 0.80 mm)•Low Body Height: 0.028″ (0.7 mm)•ESD Rating of Class 3 (>16 kV) per Human Body Model •Tight Tolerance V Z•These devices are manufactured with a Pb−Free external lead finish only.Mechanical CharacteristicsCASE: V oid-free, transfer-molded, thermosetting plasticEpoxy Meets UL 94, V−0LEAD FINISH: 100% Matte Sn (Tin)MOUNTING POSITION: AnyQUALIFIED MAX REFLOW TEMPERATURE: 260°CDevice Meets MSL 1 RequirementsMAXIMUM RATINGSMaximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.1.FR−4 Minimum Pad.See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet.DEVICE MARKING INFORMATIONELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted,V= 0.9 V Max. @ I = 10 mA for all types)VFigure 1. Zener Voltage RegulatorELECTRICAL CHARACTERISTICS (V= 0.9 Max @ I = 10 mA for all types)TEMPERATURE (°C)25010040200P O W E R D I S S I P A T I O N (%)50751001251508060Figure 2. Steady State Power DeratingPACKAGE DIMENSIONSSOD−523CASE 502−01ISSUE ANOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.DIM MIN NOM MAX MILLIMETERS A 1.10 1.20 1.30B 0.700.800.90C 0.500.600.70D 0.250.300.35J 0.070.140.20K 0.150.200.25S1.50 1.60 1.700.0430.0470.0510.0280.0320.0350.0200.0240.0280.0100.0120.0140.00280.00550.00790.0060.0080.0100.0590.0630.067MINNOM MAX INCHES ǒmm inchesǓSCALE 10:1*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。

MM3Z2V4T1G中文资料

MM3Z2V4T1 SERIESZener Voltage Regulators 200 mW SOD−323 Surface MountThis series of Zener diodes is packaged in a SOD−323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.Specification Features:•Standard Zener Breakdown V oltage Range − 2.4 V to 75 V •Steady State Power Rating of 200 mW•Small Body Outline Dimensions:0.067″ x 0.049″(1.7 mm x 1.25 mm)•Low Body Height: 0.035″ (0.9 mm)•Package Weight: 4.507 mg/unit•ESD Rating of Class 3 (>16 kV) per Human Body Model•Pb−Free Package is AvailableMechanical Characteristics:CASE:V oid-free, transfer-molded plasticFINISH:All external surfaces are corrosion resistantMAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 SecondsLEADS:Plated with Pb−Sn or Sn only (Pb−Free)POLARITY:Cathode indicated by polarity bandFLAMMABILITY RATING:UL 94 V−0MOUNTING POSITION:AnyMAXIMUM RATINGSSee specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet.DEVICE MARKING INFORMATIONELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted,V= 0.9 V Max. @ I = 10 mA for all types)ZZ Z T , D Y N A M I C I M P E D A N C E ()Ω100101.0C , C A P A C I T A N C E (p F )V Z , NOMINAL ZENER VOLTAGE (V)Figure 3. Typical Capacitance V Z , NOMINAL ZENER VOLTAGE (V)Figure 4. Typical Leakage CurrentV Z , ZENER VOLTAGE (V)101.00.10.01I Z , Z E N E R C U R R E N T (m A )V Z , ZENER VOLTAGE (V)Figure 5. Zener Voltage versus Zener Current(V Z Up to 12 V)Figure 6. Zener Voltage versus Zener Current(12 V to 75 V)1010.10.01I Z , Z E N E R C U R R E N T (m A )TEMPERATURE (°C)25010040200P O W E R D I S S I P A T I O N (%)50751001251508060Figure 7. Steady State Power DeratingPACKAGE DIMENSIONSSOD−323CASE 477−02ISSUE DSTYLE 1:PIN 1.CATHODE 2.ANODEǒmm inchesǓSCALE 10:1*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS.3.LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING.4.DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.5.DIMENSION L IS MEASURED FROM END OF RADIUS.DIM MIN MAX MIN MAX INCHESMILLIMETERS A 1.60 1.800.0630.071B 1.15 1.350.0450.053C 0.80 1.000.0310.039D 0.250.400.0100.016E 0.15 REF 0.006 REF H 0.000.100.0000.004J 0.0890.1770.00350.0070K 2.30 2.700.0910.106NOTE 3L0.075−−−0.003−−−ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。

MM3Z5V1T1中文资料

MM3Z2V4T1 SERIESZener Voltage Regulators 200 mW SOD−323 Surface MountThis series of Zener diodes is packaged in a SOD−323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.Specification Features:•Standard Zener Breakdown V oltage Range − 2.4 V to 75 V •Steady State Power Rating of 200 mW•Small Body Outline Dimensions:0.067″ x 0.049″(1.7 mm x 1.25 mm)•Low Body Height: 0.035″ (0.9 mm)•Package Weight: 4.507 mg/unit•ESD Rating of Class 3 (>16 kV) per Human Body Model•Pb−Free Package is AvailableMechanical Characteristics:CASE:V oid-free, transfer-molded plasticFINISH:All external surfaces are corrosion resistantMAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 SecondsLEADS:Plated with Pb−Sn or Sn only (Pb−Free)POLARITY:Cathode indicated by polarity bandFLAMMABILITY RATING:UL 94 V−0MOUNTING POSITION:AnyMAXIMUM RATINGSSee specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet.DEVICE MARKING INFORMATIONELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted,V= 0.9 V Max. @ I = 10 mA for all types)ZZ Z T , D Y N A M I C I M P E D A N C E ()Ω100101.0C , C A P A C I T A N C E (p F )V Z , NOMINAL ZENER VOLTAGE (V)Figure 3. Typical Capacitance V Z , NOMINAL ZENER VOLTAGE (V)Figure 4. Typical Leakage CurrentV Z , ZENER VOLTAGE (V)101.00.10.01I Z , Z E N E R C U R R E N T (m A )V Z , ZENER VOLTAGE (V)Figure 5. Zener Voltage versus Zener Current(V Z Up to 12 V)Figure 6. Zener Voltage versus Zener Current(12 V to 75 V)1010.10.01I Z , Z E N E R C U R R E N T (m A )TEMPERATURE (°C)25010040200P O W E R D I S S I P A T I O N (%)50751001251508060Figure 7. Steady State Power DeratingPACKAGE DIMENSIONSSOD−323CASE 477−02ISSUE DSTYLE 1:PIN 1.CATHODE 2.ANODEǒmm inchesǓSCALE 10:1*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS.3.LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING.4.DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.5.DIMENSION L IS MEASURED FROM END OF RADIUS.DIM MIN MAX MIN MAX INCHESMILLIMETERS A 1.60 1.800.0630.071B 1.15 1.350.0450.053C 0.80 1.000.0310.039D 0.250.400.0100.016E 0.15 REF 0.006 REF H 0.000.100.0000.004J 0.0890.1770.00350.0070K 2.30 2.700.0910.106NOTE 3L0.075−−−0.003−−−ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。

MM3Z15V中文资料

mA)
100
100
I Z = 1 mA 10
5 mA
10
150 C
75 C 1.0 0.4 0.5
25 C
0C 1.1 1.2
1.0
3.0
10 V Z , NOMINAL ZE NE R V OLTAG E
80
0.6 0.7 0.8 0.9 1.0 V F, F OR WAR D V OLTAG E (V )
Total Power Dissipation on FR-5 Board (1) @TA=25 C Thermal Resistance Junction to Ambient Air (1) Forward Voltage @ IF=10mA Junction and Storage Temperature Range NOTES:1.FR-4 Minimun Pad
Device Marking 00 01 02 05 06 07 08 09 0A 0C 0E 0F 0G 0H 0K 0L 0M 0N 0P 0T 0U 0W 0Z 10 11 12 14 18 19 20 21 1A 1C 1D 1E 1F 1G
Note: Zener voltage is meas ured with a puls e tes t current I Z at an ambient temperature of 25 C .
Zener Voltage (Note) V Z (Volts ) Min 2.2 2.5 2.8 3.1 3.4 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 14.3 15.3 16.8 18.8 20.8 22.8 25.1 28 31 34 37 40 44 48 52 58 64 70 Nom 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13.25 15 16.2 18 20 22 24.2 27 30 33 36 39 43 47 51 56 62 68 75 Max 2.6 2.9 3.2 3.5 3.8 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.8 17.1 19.1 21.2 23.3 25.6 28.9 32 35 38 41 46 50 54 60 66 72 79 @ I ZT mA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 2 2 2 2 2 2 2 2 Zener Impedanc e Z ZT @ I ZT Ω 100 100 100 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 55 55 70 80 80 80 90 130 150 170 180 200 215 240 255 Z ZK @ I ZK Ω 1000 1000 1000 1000 1000 1000 1000 800 500 200 100 160 160 160 160 160 160 80 80 80 80 80 100 100 120 300 300 300 500 500 500 500 500 500 500 500 500 mA 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 L eakage C urrent IR @ V R uA 50 20 10 5 5 3 3 3 2 1 3 2 1 0.7 0.2 0.1 0.1 0.1 0.1 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Volts 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 4.0 4.0 5.0 5.0 7.0 8.0 8.0 8.0 8.0 10.5 11.2 12.6 14.0 15.4 16.8 18.9 21.0 23.2 25.2 27.3 30.1 32.9 35.7 39.2 43.4 47.6 52.5 ΘVZ (mV /k) @ I ZT Min -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -2.7 -2.0 0.4 1.2 2.5 3.2 3.8 4.5 5.4 6.0 7.0 9.2 10.4 12.4 14.4 16.4 18.4 21.4 24.4 27.4 30.4 33.4 37.6 42.0 46.6 52.2 58.8 65.6 73.4 Max 0 0 0 0 0 -2.5 0 0.2 1.2 2.5 3.7 4.5 5.3 6.2 7.0 8.0 9.0 10 11 13 14 16 18 20 22 25.3 29.4 33.4 37.4 41.2 46.6 51.8 57.2 63.8 71.6 79.8 88.6 C @ V R =0 f=1MHz pF 450 450 450 450 450 450 450 260 225 200 185 155 140 135 130 130 130 130 120 110 105 100 85 85 80 70 70 70 70 45 40 40 40 40 35 35 35

MM3Z8V2T1G稳压二极管规格书

Zener Voltage Regulators200 mW SOD–323 Surface MountMM3Z2V0T1GSeriesThis series of Zener diodes is packaged in a SOD–323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.Specification Features:• Standard Zener Breakdown Voltage Range – 2.0 V to 75 V • Steady State Power Rating of 200 mW• Small Body Outline Dimensions: 0.067" x 0.049"(1.7 mm x 1.25 mm).Low Body Height: 0.035" (0.9 mm)• Package Weight: 4.507mg/unit• ESD Rating of Class 3 per Human Body Model • Pb-Free package is available.Mechanical Characteristics:CASE:Void-free, transfer-molded plasticFINISH:All external surfaces are corrosion resistant260°C for 10 SecondsPOLARITY:Cathode indicated by polarity band FLAMMABILITY RATING: UL94 V-0MOUNTING POSITION: AnyMAXIMUM RATINGSRating SymbolMax UnitTotal Device Dissipation FR–5 P DBoard(Note 1.) @ TA = 25°C 200 mW Derate above 25°C 1.5mW/°C Thermal Resistance fromR θJA635 °C/W Junction to Ambient Junction and StorageT J , T stg –65 to+150 °CTemperature Range 1. FR–4 Minimum PadDevicePackageShippingMM3Z2V0T1G Series SOD-3233000/Tape&ReelMM3Z2V0T3G SeriesSOD-32310000/Tape&ReelRev.A 1/6• S- Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable.• We declare that the material of product compliance with RoHS requirements.ORDERING INFORMATIONMaximum case temperature for soldering purpose:MM3Z2V0T1G SeriesELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted,V F = 0.9 V Max. @ IF = 10 mA for all types)Symbol ParameterV Z Reverse Zener Voltage @ I ZT I ZT Reverse CurrentZ ZT Maximum Zener Impedance @ I ZT I ZK Reverse CurrentZ ZK Maximum Zener Impedance @ I ZK I R Reverse Leakage Current @ V R V R Reverse Voltage I F Forward Current V F Forward Voltage @ I FQ V Z Maximum Temperature Coefficient of V Z CMax. Capacitance @V R = 0 and f = 1 MHzRev.A 2/62.Zener voltage is measured with a pulse test current I Z at an ambient temperature of 25°C.Rev.A 3/6MM3Z2V0T1G SeriesTypical CharacteristicsZ Z T , D Y N A M I C I M P E D A N C E ()Ω1000100101.0C , C A P A C I T A N C E (p F )70V Z , NOMINAL ZENER VOLTAGE (V)Figure 3. Typical Capacitance 104.0V Z , NOMINAL ZENER VOLTAGE (V)Figure 4. Typical Leakage Current70605040302010Rev.A 4/6MM3Z2V0T1G SeriesTypical Characteristics12V Z , ZENER VOLTAGE (V)100101.00.10.01108.06.04.02.00I Z , Z E N E R C U R R E N T (m A )V Z , ZENER VOLTAGE (V)Figure 5. Zener Voltage versus Zener Current(V Z Up to 12 V)Figure 6. Zener Voltage versus Zener Current(12 V to 75 V)1001010.10.011030507090I Z , Z E N E R C U R R E N T (m A )Figure 7. Steady State Power DeratingRev.A 5/6300200100005025100150P O W E R D I S S I P A T I O N : P d (m W )AMBIENT TEMPERA TURE : T a (°C)MM3Z2V0T1G SeriesPACKAGE DIMENSIONSSOD-323Rev.A 6/6HE NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS.3.LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING.4.DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.5.DIMENSION L IS MEASURED FROM END OF RADIUS.NOTE 3DIM MIN NOM MAX MILLIMETERSA 0.800.90 1.00A10.000.050.10A30.15 REF b 0.250.320.4C 0.0890.120.177D 1.60 1.70 1.80E 1.15 1.25 1.350.082.30 2.50 2.70L 0.0310.0350.0400.0000.0020.0040.006 REF0.0100.0120.0160.0030.0050.0070.0620.0660.0700.0450.0490.0530.0030.0900.0980.105MINNOM MAX INCHESSOLDERING FOOTPRINT*MM3Z2V0T1G Series。

欧洲品牌电磁器件型号123456产品说明书

Dimensions: [mm]Scale - 5:174404054047BC74404054047T e m p e r a t u r eT pT L74404054047Cautions and Warnings:The following conditions apply to all goods within the product series of WE-LQS of Würth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.•Strong forces which may affect the coplanarity of the components’ electrical connection with the PCB (i.e. pins), can damage the part, resulting in avoid of the warranty.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product.•Using a brush during the cleaning process may break the wire due to its small diameter. Therefore, we do not recommend using a brush during the PCB cleaning process.Potting:•If the product is potted in the customer application, the potting material may shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODChrB.001.0062022-10-01DIN ISO 2768-1mDESCRIPTIONWE-LQS SMT Semi-ShieldedPower Inductor ORDER CODE74404054047SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODChrB.001.0062022-10-01DIN ISO 2768-1mDESCRIPTIONWE-LQS SMT Semi-ShieldedPower Inductor ORDER CODE74404054047SIZE/TYPE BUSINESS UNIT STATUS PAGE。

六数控钻说明书

六数控钻说明书1. 简介六数控钻是一种高效、精准的数控钻床，广泛应用于金属加工领域。

其采用先进的数控技术，可以实现自动化加工，大大提高了加工效率和产品质量。

本说明书将详细介绍六数控钻的特点、操作方法、维护保养等内容，帮助用户更好地了解和使用该设备。

2. 设备特点•高精度：六数控钻采用精密的数控系统和高精度的钻头，可以实现毫米级的定位精度。

•高效率：设备配备强大的驱动系统和快速换刀装置，能够快速完成钻孔任务，提高生产效率。

•稳定性：六数控钻床采用优质的材料和稳定性强的机械结构，确保设备长时间稳定运行。

•易操作：设备配备直观的操作界面和简单的操作流程，即使是没有经验的操作人员也能够轻松上手。

3. 操作方法3.1 基本操作流程1.启动设备：将电源插头插入插座，并按下开关按钮，设备即可启动。

2.载入程序：使用U盘或通过网络将加工程序传输到设备的数控系统中。

3.夹紧工件：将待加工的工件固定在工作台上，并使用夹具进行夹紧。

4.定位坐标：使用设备的数控系统，通过输入坐标值实现钻孔的准确定位。

5.开始加工：根据设定的程序和参数，按下开始按钮，设备开始自动加工钻孔。

6.监控加工过程：密切观察设备运行情况，确保加工质量和生产效率。

7.完成加工：当所有钻孔任务完成后，停止设备并取下加工件，进行下一步操作或者清洁设备。

3.2 数控系统操作说明六数控钻配备直观易懂的数控系统界面，操作简单方便。

以下是数控系统的基本操作说明：•加载程序：将加工程序上传至数控系统中，并进行加载。

•设置坐标：根据工件图纸的要求，设置钻孔的坐标值。

•轴向控制：通过数控系统的轴向控制功能，实现钻孔深度和孔间距的调整。

•速度控制：调整设备的进给速度和转速，以满足不同工件的加工要求。

•运行状态监控：实时监控设备的运行状态，及时发现和处理异常情况。

4. 维护保养为保证设备的正常运行和延长使用寿命，用户需进行定期的维护保养工作。

以下是一些维护保养的注意事项：•清洁设备：定期对设备进行清洁，避免积尘和油污影响设备性能。

SIM SAM 6 8Pin 机械插槽卡插座说明书

CCM03-3003LFT R102 Sim card connector 8 inlay contacts with hinged cover
CCM03-3004LFT R102 Sim card connector 8 inlay conatcts with hinged cover with plastic peg
Fixed cover: 3N max
Card extraction force
Hinged cover: 1N max Fixed cover: 0,80N min / 3N max
Contact force
0,25N min / 0,50N max
Slide locking force
Soldering Process
Compatible with lead free SMT soldering process
SIM/SAM
How To Order Part number list is shown below. For individual part details, please refer to the following pages.
5,08 3,7 9,65
10,16 20,32
6x
1,3
0,7 25˚
S 3,5
Slider locked
29,65 13,8
2,45 R 1,9
1,25 0,7
ø1±0,05 DETAIL A Scale 5
1,25
11,25 17,2
Normally open 100 mΩ max 250 Vrms min 1 mA min / 10m A max 0.2 VA
Environment Data

MM3Z3V3T1G稳压二极管规格书

Zener Voltage Regulators200 mW SOD–323 Surface MountMM3Z2V0T1GSeriesThis series of Zener diodes is packaged in a SOD–323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards.Specification Features:• Standard Zener Breakdown Voltage Range – 2.0 V to 75 V • Steady State Power Rating of 200 mW• Small Body Outline Dimensions: 0.067" x 0.049"(1.7 mm x 1.25 mm).Low Body Height: 0.035" (0.9 mm)• Package Weight: 4.507mg/unit• ESD Rating of Class 3 per Human Body Model • Pb-Free package is available.Mechanical Characteristics:CASE:Void-free, transfer-molded plasticFINISH:All external surfaces are corrosion resistant260°C for 10 SecondsPOLARITY:Cathode indicated by polarity band FLAMMABILITY RATING: UL94 V-0MOUNTING POSITION: AnyMAXIMUM RATINGSRating SymbolMax UnitTotal Device Dissipation FR–5 P DBoard(Note 1.) @ TA = 25°C 200 mW Derate above 25°C 1.5mW/°C Thermal Resistance fromR θJA635 °C/W Junction to Ambient Junction and StorageT J , T stg –65 to+150 °CTemperature Range 1. FR–4 Minimum PadDevicePackageShippingMM3Z2V0T1G Series SOD-3233000/Tape&ReelMM3Z2V0T3G SeriesSOD-32310000/Tape&ReelRev.A 1/6• S- Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable.• We declare that the material of product compliance with RoHS requirements.ORDERING INFORMATIONMaximum case temperature for soldering purpose:MM3Z2V0T1G SeriesELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted,V F = 0.9 V Max. @ IF = 10 mA for all types)Symbol ParameterV Z Reverse Zener Voltage @ I ZT I ZT Reverse CurrentZ ZT Maximum Zener Impedance @ I ZT I ZK Reverse CurrentZ ZK Maximum Zener Impedance @ I ZK I R Reverse Leakage Current @ V R V R Reverse Voltage I F Forward Current V F Forward Voltage @ I FQ V Z Maximum Temperature Coefficient of V Z CMax. Capacitance @V R = 0 and f = 1 MHzRev.A 2/62.Zener voltage is measured with a pulse test current I Z at an ambient temperature of 25°C.Rev.A 3/6MM3Z2V0T1G SeriesTypical CharacteristicsZ Z T , D Y N A M I C I M P E D A N C E ()Ω1000100101.0C , C A P A C I T A N C E (p F )70V Z , NOMINAL ZENER VOLTAGE (V)Figure 3. Typical Capacitance 104.0V Z , NOMINAL ZENER VOLTAGE (V)Figure 4. Typical Leakage Current70605040302010Rev.A 4/6MM3Z2V0T1G SeriesTypical Characteristics12V Z , ZENER VOLTAGE (V)100101.00.10.01108.06.04.02.00I Z , Z E N E R C U R R E N T (m A )V Z , ZENER VOLTAGE (V)Figure 5. Zener Voltage versus Zener Current(V Z Up to 12 V)Figure 6. Zener Voltage versus Zener Current(12 V to 75 V)1001010.10.011030507090I Z , Z E N E R C U R R E N T (m A )Figure 7. Steady State Power DeratingRev.A 5/6300200100005025100150P O W E R D I S S I P A T I O N : P d (m W )AMBIENT TEMPERA TURE : T a (°C)MM3Z2V0T1G SeriesPACKAGE DIMENSIONSSOD-323Rev.A 6/6HE NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS.3.LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING.4.DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.5.DIMENSION L IS MEASURED FROM END OF RADIUS.NOTE 3DIM MIN NOM MAX MILLIMETERSA 0.800.90 1.00A10.000.050.10A30.15 REF b 0.250.320.4C 0.0890.120.177D 1.60 1.70 1.80E 1.15 1.25 1.350.082.30 2.50 2.70L 0.0310.0350.0400.0000.0020.0040.006 REF0.0100.0120.0160.0030.0050.0070.0620.0660.0700.0450.0490.0530.0030.0900.0980.105MINNOM MAX INCHESSOLDERING FOOTPRINT*MM3Z2V0T1G Series。

雅马哈船外机铭牌注解

雅马哈船外机铭牌注解船外机是一种安装在船上的驱动装置，雅马哈是船外机制造领域的知名品牌之一、每款雅马哈船外机都会附带铭牌，铭牌上包含了一些重要的信息和注解，对于使用者来说，了解并正确理解铭牌信息是十分重要的。

1. 型号(Model)：型号是指船外机的具体型号标识，它用于标识船外机的规格和配置。

型号通常由字母和数字组成，不同的型号代表着不同的功能和性能特点。

通过型号的标识，用户可以更好地了解船外机的规格，并根据自身需求选择合适的型号。

2. 额定功率(Rated Power)：额定功率是指船外机达到的最高输出功率。

它通常以马力（HP）为单位进行标示，表示船外机在正常工况下的最大输出能力。

用户在选择船外机时，可以根据自己的需要和船只的大小，合理选择适合的额定功率。

3. 排量(Displacement)：排量是指发动机在每个工作循环中活塞从顶死点到底死点的位移大小。

排量的大小直接影响发动机的动力输出和燃料消耗。

在船外机的铭牌上，排量通常以立方厘米(cc)为单位进行标示。

4. 最高转速(Maximum Revolution Speed)：最高转速是指船外机在不损坏发动机的情况下所能达到的最高转速。

最高转速的设定要根据船外机的设计和材料强度来确定，用户在操作时应注意不要超过最高转速。

5. 制造编号(Manufacturing Number)：制造编号是指每台船外机独一无二的标识代码，用于追踪生产日期和批次信息。

制造编号在定期维护和保养船外机时十分重要，也可以用于查询产品的生产信息和售后服务。

6. 燃料类型(Fuel Type)：燃料类型表示船外机所使用的燃料种类，例如汽油、柴油或者混合燃料等。

用户在使用船外机时，需要确认船外机所使用的燃料类型，并按照相关规定进行加油。

7. 原产国(Country of Origin)：原产国是指船外机的生产制造国家。

知道船外机的原产国可以帮助用户了解其制造质量和售后服务的情况。

MMSZ6V2中文资料

POWER: 0.5 Wa t VOLTAGE RANGE: 2.4 - 7 5VMMSZ2V4 - MMSZ75SymbolValueUnitTotal Power Dissipation on FR-5 Board,P DmW(Note 1), at T L = 75 °Derated above 75 °C6.7mW/°C Thermal Resistance Junction to Ambient R ӨJA 340°C/W Thermal Resistance Junction to Lead R ӨJL150°C/W Junction Temperature Range T J -55 to + 150°C Storage Temperature RangeT STG-55 to + 150°CNote :(1) FR-5 = 3.5 x 1.5 inchesParameterFeaturesSmall Package Size for High Density Applications!!!!Total Power Dissipation 500 mW on FR-4or FR-5 BoardWide Zener Reverse Voltage Range 2.4 Vto 75 VPackage Designed for Optimal AutomatedBoard AssemblyC 500SURFACE MOUNT SILICON ZENER DIODES: SOD-123FLplastic body over passivated junction Method 2026: Color band denotes cathode end : AnyCase Terminals Polarity Mounting Position : Plated axial leads,solderable per MIL-STD-750,Mechanical Data!!!!!!Weight:0.0007 ounce, 0.02 grams3.58 3.72 0.55 0.57 0.530.15 0.17 0.13E D 1.00 1.03 0.097 1.05 1.08 1.021 1.80 1.83 1.77 2.75 2.78 2.72A 3.653 SOD-123FLDim Min Max Typ B C H L All Dimensions in mmMaximum Ratings T A = 25°C unless otherwise specified MMSZ6V2MMSZ6V2ELECTRICAL CHARACTERISTICS (Ta = 25 °C unless otherwise note, V F= 0.9 Vmax. @ I F= 10 mA)ZZT1 (3)Z ZT2 (3)Max. Reverse @ I ZT1 = @ I ZT2 =Leakage 5 mA 1 mA Current MinNom Max Min Max (μA)(V)2.28 2.4 2.52100 1.7 2.160050 1.02.57 2.7 2.84100 1.9 2.460020 1.02.85 3.0 3.1595 2.1 2.760010 1.03.14 3.3 3.4795 2.3 2.9600 5.0 1.03.42 3.6 3.7890 2.7 3.3600 5.0 1.03.71 3.9 4.1090 2.9 3.5600 3.0 1.04.09 4.3 4.5290 3.3 4.0600 3.0 1.04.47 4.7 4.9480 3.7 4.7500 3.0 2.04.85 5.1 5.3660 4.2 5.3480 2.0 2.05.32 5.6 5.8840 4.8 6.0400 1.0 2.05.89 6.2 6.5110 5.6 6.6150 3.0 4.06.46 6.87.1415 6.37.280 2.0 4.07.137.57.8815 6.97.980 1.0 5.07.798.28.61157.68.7800.7 5.08.659.19.56158.49.61000.5 6.09.501010.50209.310.61500.27.010.451111.552010.211.61500.18.011.401212.602511.212.71500.18.012.351313.653012.314.01700.18.014.251515.753013.715.52000.0510.515.201616.804015.217.02000.0511.217.101818.904516.719.02250.0512.619.002021.005518.721.12250.0514.020.902223.105520.723.22500.0515.422.802425.207022.725.52500.0516.8Notes :(1) The type number shown have a standard tolerance of±5% on the nominal Zener Voltage.(2) Tolerance and Voltage Designation: Zener Voltage (V Z ) is measured with the Zener Current applied for PW = 1ms.(3) Z ZT and Z ZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I Z(AC)=0.1I Z(DC), with the AC frequency = 1 kHz.V Z1(1, 2)V Z2 (1, 2)(Ω)I R @ V R @ I ZT1 = 5 mA@ I ZT2 = 1 mA(V)(Ω)(V)TYPEMMSZ2V4 MMSZ2V7 MMSZ3V0 MMSZ3V3 MMSZ3V6 MMSZ3V9 MMSZ4V3 MMSZ4V7 MMSZ5V1 MMSZ5V6 MMSZ6V2 MMSZ6V8 MMSZ7V5 MMSZ8V2 MMSZ9V1 MMSZ10 MMSZ11 MMSZ12 MMSZ13 MMSZ15 MMSZ16 MMSZ18 MMSZ20 MMSZ22 MMSZ24MMSZ6V2MMSZ6V2ELECTRICAL CHARACTERISTICS (Ta = 25 °C unless otherwise note, V F= 0.9 Vmax. @ I F= 10 mA)Z ZT1(3)Z ZT2 (3)Max. Reverse @ I ZT1 = @ I ZT2 =Leakage TYPE NO.2 mA0.5 mA Current MinNom Max Min Max (μ25.652728.358025.028.93000.0518.928.503031.508027.832.03000.0521.031.353334.658030.835.03250.0523.134.203637.809033.838.03500.0525.237.053940.9513036.741.03500.0527.340.854345.1515039.746.03750.0530.144.654749.3517043.750.03750.0532.948.455153.5518047.654.04000.0535.753.205658.8020051.560.04250.0539.258.006266.00200---0.24764.006872.00250---0.25270.007579.00300---0.257Notes :(1) The type number shown have a standard tolerance of ±5% on the nominal Zener Voltage.(2) Tolerance and Voltage Designation: Zener Voltage (V Z ) is measured with the Zener Current applied for PW = 1ms.(3) Z ZT and Z ZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for I Z(AC)=0.1I Z(DC), with the AC frequency = 1 kHz.(Ω)I R @ V R V Z1(1, 2)V Z2 (1, 2)@ I ZT1 ZT2 = 0.1 mA(V)(Ω)(V) MMSZ27 MMSZ30 MMSZ33 MMSZ36 MMSZ39 MMSZ43 MMSZ47 MMSZ51 MMSZ56 MMSZ62 MMSZ68 MMSZ75= 2 mA@ I MMSZ6V2MMSZ6V2。

3D Printer Guide- Taz 6 machine说明书

3d Printer Guide-T az 6 machineMain MenuPush in Knob one time to select an itemInfo Screen Takes you back homeMovement Moves the nozzle head across the X, Y,& Z axis.(Left/Right, Forward/Backward &Up/Down)Temperature Allows you to manually change thetemperature of the Nozzle or the Bed Configuration Don’t mess with this. It’s the technicalinsides of the machineChange Filament Use this to change rolls of filamentPrint From SDAccess to the SD card to select a print (Lives below Change filament whenmoving the knob)Movement MenumenuAuto Home Sends the nozzle “home” tothe back left corner of thebedDisable Steppers Don’t do itMove Axis Takes you to the menuwhere you canmove/extrude the nozzleMove Axis menu Array Move Axis Takes you back to theprevious menuMove X Moves nozzle left & rightMove Y Moves bed forward &backMove Z Moves nozzle up & downExtruder Pushes filament throughthe nozzleMove X,Y or Z menu Array Movement Takes you back to theprevious menuThe rest of the options are how far in mm you wantto move the nozzle or bed each time.●I usually do 10 mmTemperature MenuMain Takes you back to mainmenuNozzle Controls the temperatureof the nozzle●Melting point ofPLA filament is205°Bed Resting temperature is45°Fan Speed/Cooldown Don’t mess with thesePrint from SD Array Main Takes you back to theMain MenuMonth Folders This is where the QuickPrint projects liveEverything Else These are the projectssaved that can beprinted●If the project doesnot appear, checkthe originalcomputer as it mayhave been savedthere insteadChange FilamentSelect PREHEAT PLA●Nozzle will heat up to 200°When heated up, it will unload thefilament. When it is finished, remove the old filament and insert the new one.Follow the instructions. Insert filament through the feeding tube and into the heating mechanism then press the knob.The machine will slowly (very slowly)pull the filament through.●You may have to gentlyguide/push the filament to getit startedAfter awhile “End or Purge more” will show up on the screen. If you see the filament coming out the nozzle click “END” if it is not, click “Purge More”3D Printer Guide-C URA SOFTWAREStep 1:Open up Cura from the desktop. Either onewill work, these instructions are for the newone “Cura 3.2.27”Steps 2-4 may not apply. If the screen in step 2 does not appear when opening up Cura, skip ahead to step 5Step 2Upon Opening, the user agreement will popup. Hit agreeAdd Printer: Lulzbot TAZ 6>Single ExtruderMachine Settings: Click FinishStep 3●Check that it is set to the correctMaterial. If the Octopus is not limegreen, it’s not the right material.●There is a drop down menu on theright hand side of the screen.●It should be P oly Lite PLA (Polymaker)Not the Correct Material Correct Material Step 4-Set the CostThrough the Menu at the top of the screen clickSetting>Material>Manage Materials●Select PolyLite PLA (Polymaker○Filament Cost: $0.10○Filament Weight: 1g●Close Out to saveStep 5Import the .stl file by clicking on the Import folder Icon on the Left side of the screenStep 6: Left Menu OverviewMove ●Use this to move the item around onthe bed.● It is the default mode settingScale ●Use this to resize the object●You can resize by how big you wantit (in mm) or Percent of original sizeRotate ●Use this to rotate the object to findthe best option for printing●This is also where the “Lay Flat” iconlivesStep 7: Check for support structureSupport structures are needed any time an object hasparts not touching the bed.Example: anything with legs●These places are indicated in red●To add support structures click on the“Generate Support” option on the right sidemenuStep 8: If support structures are neededOften supports are not easy to take off, sothe less supports the better. Try rotating theobject around to see if less supportstructures are needed from different views.●On the top of the screen click on “solidview” which will open up a drop downmenu●Select “Layer View” to see where thesupports are on the object.Object with support structures that hasn’t been rotatedRotated object has less support structureStep 9: When you are ready to printOn the bottom right of the screen is the information you need to print File Name ●Change this by clicking the pencil●Using your name and Date makes iteasy to findPrint time & Cost This tells you approximately how long the printwill take and the cost of materials.●Cost is 10 cents per gram.Save button If it doesn’t say “Removable Device” it is notsaving to the SD card。

Honda 6 mm Flange Nut Installation Instructions说明书

• Reinstall the removed parts on e wires and harnesses are not pinched.
(1)
Installation Instructions URL
(2)
Back-up alarm stay
BACK-UP BUZZER
ASSEMBLED BACK-UP BUZZER
15. Remove the dummy connector as shown.
2-PIN WATERPROOF CONNECTOR (White)
2-PIN WATERPROOF DUMMY CONNECTOR (White) (Save)
Item 6 mm flange nut
N·m kgf·m Ibf·ft
12
1.2
9
2. Lift the bed as shown.
© 2015 American Honda Motor Co., Inc. - All Rights Reserved.
1 of 4
BED Lift up.
87971-HL4-A001
SCREW
REAR MUD GUARD LID
CLIP
CLIP
REAR MUD GUARD
<SXS1000M5D/M5P>
9. Remove the clamp as shown.
• Perform this step on SXS1000M5D and SXS1000M5P model only.
5. Remove the fuel tank cap and right rear side cover as shown. • Repeat on the left side.

M-Sky KA-600 用户手册说明书

KA-600USER MANUALM SKY CO.,LTD--5F,NO.15BUILDING,GAME&AMUSEMENT PART,GANGKOU,ZHONGSHAN,GUANGDONG,CHINA Tel:0086-0760-********Fax:0086-0760-********Email:**************.cn Web:IMPORTANT!★Read the manual before operating this machine★Keep this manual for your referenceContent1.General Information---------------------------------------------------------------------------31.1Specification-------------------------------------------------------------------------------31.2Warning-------------------------------------------------------------------------------------41.3Caution--------------------------------------------------------------------------------------41.4Power supply and installation---------------------------------------------------------41.5Use-------------------------------------------------------------------------------------------41.6Maintenance------------------------------------------------------------------------------42.Parts and Functions------------------------------------------------------------------------------53.Game Instruction---------------------------------------------------------------------------------64.Background Setting Instruction---------------------------------------------------------------75.Wiring Diagram-----------------------------------------------------------------------------------86.Quick Trouble Shooting-------------------------------------------------------------------------97.Warranty------------------------------------------------------------------------------------------10Model Jungle Around Reference Code KA-600Power at rest95WPower in operation160W Dimensions(mm)1250x1250x2320mm Weight(KG)180KG Feeding voltage220V/110V Seats3Users range of ages2~6yearsFeel Magic Jungle World!Scene decoration&amusement.Touch me-interactive voice functionThree running ponies with different colors.Slowly go up and down,ensure players’safety.●Do not set the machine where it could block emergency exits.●Install the machine in a horizontal and stable surface.●Do not bend the power cord by force or place heavy objects on it.●Never plug or unplug the power cord with wet hands.●Before inspecting the machine,make sure the power is OFF.●Use always,for replacement parts,pieces authorized by M SKY.●The machine must be connected to a plug with ground.●Do not put the power cord where people walk through.●Do not lift the machine by part,could be damaged.Must be always be lift by the base.●If the power cord is damaged，please power off and contact our staff for replacement.●Use only a grounded outlet.●Check the power requirements at the installation place machine.●Do not touch the power plug with wet hands.●Use specified fuse rating.●Before introducing the coin in to the machine,be sure that the child sit correctly.●Do not rise or go down the child while the kiddie is in movement.●This machine must be operated under adult supervision.●Only one player on one seat.●Be sure to check and maintain the game regularly.●Switch off the power before cleaning or replacing the parts of the game.●Only qualified personnel to inspect or test the electronic card.●Please use clean and soft cloth to clean the game.●Prevent damaging the surface of the game,please use gentle cleanser.2.Parts and FunctionsOpen top coverShow sky projectionEmergency Stop Button Open for background settingTouch the tigers It will say:“Don’t Touch me.”3.Game Instruction4.Background setting5.Wiring DiagramBlack LCD,no picture（1）Please check whether LCD driver board cable and game box cable is connect well（2）Please check whether the18A power supply LED light is on or off.If LED light off:The power supply broken（3）Please check whether can insert coin.If no,game box has problem（4）Please check whether the fan on the game box is workingIf no,game box has problemMachine can’t move to Left or Right（1）Please check whether the cable of steering wheel LR board is connected well （2）Please add some lube on the ball bearing and push the machinehead move to Right and Left.（3）Please check whether the game can move right or left.If no,thesteering wheel brokenGame stuck during playing（1）Game box problem,send back to repair.Coin accepter can’t accept coin（1）Please change another coin selector to try（2）Please check whether coin selector cable is connected wellNo voice or low voice（1）Please check whether the speaker cable connected well.7.Warranty。

MantelMount 电视杆说明书

This product contains small parts that can be achoking hazard. Do not let children play with any of these small parts! Keep children away from the work area during installation.Do not use this product in any way, or for any purpose, that is not specifically described inthese instructions. MantelMount is notresponsible for damage or injury caused by incorrect installation or improper use.This product is intended to be installed byprofessional installation contractors, or persons familiar with the tools and methods required for this installation. If you are not sure about your ability to perform this installation, you must contact a professional. MantelMount is not responsible for damage or injury caused by incorrect installation or improper use.CAUTION:CAUTION:MantelMount.Do not operate MantelMount when anyone is near or behind the mount. MantelMount is very strong and can result in crushing injuries.that is able to hold five times the combined weight of all equipment. If you are unsure about your structure, a contractor must evaluate your installation.U.S. Pat. No. 8,864,092MM750 Installation InstructionsPlease read this entire manual before you begin.Do not unpack any contents until you verify all requirements on PAGE 3. If you have any questions, visit or call (800) 897-9755 ext.1IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONSBefore you begin, please verify that all components are included and undamaged. If any parts are missing or damaged, contact MantelMount. Never proceed with missing or damaged parts!Lay out all components and make sure you identify that each one has a match in the diagram. Some of the parts included will not be used during installation. Do not proceed if you do not understand and identify all of the components.{02} x4M5x30{01} x4M5x12{10} x4M5-M6{11} x12M8{12} x8Spacer{18} x8M6x12{19} x4M6x40{03} x4M5x40{05} x4M6x30{04} x4M6x16{06} x4M6x40{08} x4M8x25{07} x4M8x15{09} x4M8x45{13} x4Lag Bolt{16} x4Locknut M6{17} x4Locknut M8{14} x2Anchor{15} x8Cable Ties{20} x8M8x16{27} x2Vertical Brace{28} x2Brace Extender{26} x1TV Frame{30} x1Lift Housing{25} x6Wall Cover{21} x4Stud Bracket{29} x1Horizontal Brace, TV{31} x2Horizontal Brace{56} x1Center Handle2 MantelMount MM750MantelMount is designed for use only with decorative fireplaces that are not the primary heat source for a house. Temperature at the front edge of mantle should never exceed 110° F .ACEMantle must not extend from mounting surface more than 19 inches (22 inches for non-recessedinstallations). MantelMount can not extend past a mantel larger than 19 inches. Larger mantels will also reduce the amount of side-to-side swivel.110°F MAX.If mantle extends:Less than 10 inches 10 - 14 inches 14 - 16 inches 16 - 19 inchesThis is required space height:TV height plus 6 inches TV height plus 8 inches TV height plus 10 inches TV height plus 15 inchesThe space above the mantle must be taller than the TV . The required space depends on how far out the mantle extends. Refer to chart below and add this additional height to the TV height to determine if space is tall enough.Note: This is not an installation step, only a verification.Do not use these dimensions during installation.Customer Support 1.800.897.9755 x1 3..Irregular BackIrregular BackTV insert4 MantelMount MM750. However, the Brace Extenders {28}- The Brace Extenders areabove the bottom of the TV.- The Brace Extenders are installedonto the Horizontal Brace {29}..WithoutSound Bar:Extenders are1 or2 inchesabove the TV{12}Bottom ofCustomer Support 1.800.897.9755 x1 56 MantelMount MM750RECESSED installation using the Horizontal Braces {31} to attach to existing wall studs:The Horizontal Braces attach to the flange on the front of the Lift Housing {30}.The Braces can be located off-center to the Housing, if needed, to reach the nearest stud.Use the included Template to mark the location to cut the drywall. This installation is easiest when there is no center stud that needs to be cut to make room.Paintable Wall Covers {25} can be snapped onto the Horizontal Braces.{20}{31}{17}{13}{25}{11}Installation Options: Recessed using Horizontal Braces {31}Customer Support 1.800.897.9755 x1 7FIG. C(view facing the wall) When cutting a center stud, measure 1.5" above and below thetemplate mark before the opening is cut out. The drywall will holdthe stud in place while it is cut. Plunge cut through the stud atboth locations and attach the cut ends to the cross bracing whenthey are installed, see FIG. C.Cutting a Center Stud:{21}Stud Bracket8 MantelMount MM750washers are firmly against the Housing. Damage due to overtightening can cause property damage or injury.entire template to cut out the drywall.Customer Support 1.800.897.9755 x1 9. Always remember to tighten.{11}{20}{26}10 MantelMount MM750TV securely in the up position while also allowing the TV to gently rest in the down position. See the diagram below for the correct lifting adjustment.Neutral in the MID positionsCustomer Support 1.800.897.9755 x1 11Adjusting the Hard Stops for Range of Motion::12 MantelMount MM750Customer Support 1.800.897.9755 x1 1314 MantelMount MM750I T E M N O .P A R T N U M B E R D E S C R I P T I O N Q T Y .123456789101112131415161718192021222324253026272829121894121904121914121931219444M 5 x 12M 5 x 30M 5 x 40M 6 x 16M 6 x 30121974121984412199121954M 8 x 15M 8 x 25M 8 x 45M 6 x 401216641412636121228141374W a s h e r M 6W a s h e r M 8 x 2S p a c e r141101216284R o u n d S c r e w M 6 x 12121836121878L a g B o l t M 8 x 6041217634C a b l e T i e A n c h o r7L o c k n u t M 821050T V F r a m e , W e l d e d14038V e r t i c a l B r a c e1C a b l e T i e23121862N u t M 8140562B r a c e E x t e n d e r140601T V H o r i z o n t a l B r a c e211406W a l l C o v e r12255821088R o u n d S c r e w M 6 x 4012178S o c k e t C a p S c r e w M 8 x 2521090S o c k e t C a p S c r e w M 8 x 40L o c k n u t M 6211151R e c e s s F r a m e , 750, W e l d e d15023S t u d B r a c k e t4R o u n d S c r e w M 8 x 16Customer Support 1.800.897.9755 x1 15Full Manufacturer Warranty:MantelMount will replace or repair any product or part that proves defective due to improper workmanshipor material during the warranty period. Visit for details.S. Pat. No. 8,864,092REV 022020MM750CUSTOMER SUPPORT(800)-897-9755 。

标准NSK直线导轨 LH系列_LS系列

滑块
(kg)
0.46 0.69 0.69 1.16 1.2 1.7 3.0 3.9 4.7 6.1
轨道
(kg/m)
3.6 5.2 7.2 12.3 16.9
A178
LH系列
LH-EL（高负载型） LH-GL（超高负载型）
L H 3 5 0 8 4 0 E L C 2 - ＊＊ P N 0
系列
预压符号·0：Z0
4000 31000 （3500） 46000
51500 91500
490 870
34 29 80 9× 14×12 17 4000
47500 80500 61500 117000
950 1380
45 38 105 14× 20×17 22.5 3990
81000 140000 99000 187000
85.6 40 124.6 109 50 143 139 60 171 163 75 201孔 T1 N
35
M6×1×6
6.5 58 11.5 29 12 M6×0.75 6 11
50 86 18
40 M8×1.25×8 10 59 9.5 33 14 M6×0.75 7 11 60 98 19
4 10 32 80 181 155 355 267 610 292 865 630 1280 1460 2520 2510 4350 4150 8450
1.2000 0.013
1.5875 0.026
2.3812 0.082
3.175
0.18 0.26
3.968
0.33 0.48
4.762
0.55 0.69
LH25AL
36
7 12.5 48

安利电子产品说明书

Holds up to Extends Mounting Pattern
135 lbs 28" UNIVERSAL
Holds up to Extends Mounting Pattern
130 lbs 25.75" UNIVERSAL
VLF220
page 85
LRF118
page 102
VLF210
SANUS TV Mount Size Chart
RECOMMENDED TV SIZE (INCHES)
13 » 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
page 85
Holds up to Extends Mounting Pattern
130 lbs 20" UNIVERSAL
Holds up to Extends Mounting Pattern
130 lbs 17" UNIVERSAL
Holds up to Extends Mounting Pattern
SANUS TV Mount Size Chart
RECOMMENDED TV SIZE (INCHES)
13 » 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90