ONT10S04L06

合集下载

Nokia ONT XS-2426G-A 室内光网络终端说明书

The Nokia ONT XS-2426G-A is a dual-band Wi-Fi 6 mesh system with Wi-Fi Alliance certified Wi-Fi EasyMesh, enhanced by Nokia value added features. The Nokia WiFi Mesh Middleware creates a self-healing, self-optimizing network and includes intelligent channel selection, band steering, client steering and backhaul management to provide the best Wi-Fi performance. As it is EasyMesh ™ compliant, it provides interoperability and avoids vendor lock-in.Optionally, the Nokia ONT XS-2426G-A can be managed by the Nokia WiFi Cloud Controller. The associated Home Console presents the help desk agents with a real-time holistic view of the in-home network to assist them with easy identification and instantaneous resolution of issues. The Network Console provides an end-to-end Wi-Fi network view and allows management of groups of Wi-Fi networks.This Nokia indoor ONT is designed to deliver triple play services (voice, video and data) to residentialNokia ONT XS-2426G-AResidential gateway ONT (XS-2426G-A)The Nokia ONT XS-2426G-A is the solution for home networking that is delivered by 10 Gigabit symmetrical Passive Optical Network (XGS-PON). The device has built-in concurrent dual-band Wi-Fi® 802.11 b/g/n/ax and 802.11a/n/ac/ax networking with triple play capabilities that include voice, video and data. The XS-2426G-A supports Wi-Fi EasyMesh™, to create a whole home mesh network. This coverage can be expanded at any time by installing additional Wi-FiEasyMesh-capable beacons to ensure seamless roaming throughout the home. The XS-2426G-A includes the Nokia WiFi Mesh Middleware which ensures the best possible Wi-Fi performance. The end-user experience is enhanced by the service provider’s Wi-Fi management capabilities in the cloud and intuitive home user support using the Nokia WiFi mobile app.subscribers. Voice services are provided through two plain old telephone service (POTS) ports with an integrated analog telephone adapter (ATA) that converts voice traffic into Session Initiation Protocol (SIP). Connectivity to an existing public switched telephone network (PSTN) Class 5 switch is supported through SIP with direct interoperability of a variety of soft switches. Ethernet connectivityis available on four Gigabit Ethernet (GigE) ports, allof which have the ability to burst up to a full gigabit dynamically. Service providers can deliver video using IP packets (IPTV).Relying on dual-band Wi-Fi allows for support of the widest range of customer products.The IEEE 802.11ax standard enables gigabit speeds on many newer devices, while the widely supported 802.11b/g/n/ac standard can simultaneously connect to legacy devices.Features• Four RJ-45 10/100/1000 Ethernet ports• Two POTS ports for carrier-grade voice services • Dual-band concurrent Wi-Fi: 2.4GHz and 5GHz • Wireless IEEE 802.11 b/g/n/ax: 2.4GHz• Wireless IEEE 802.11ac/ax: 5GHz• Network Address Translation (NAT) and firewall • Voice interworking function from the analog POTS lines to the voice over IP (VoIP) and Ethernet layers• One USB 3.0 host port• Optics support received signal strength indication (RSSI)• Supports virtual private network (VPN) passthrough for Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP) and IPSec• Port forwarding and demilitarized zone (DMZ)/ dynamic domain name system (DDNS) Benefits• Integrates the ONT and wireless access point functions to allow for one less device in the home • Delivers connectivity to Ethernet devices within the home• Comes equipped with Nokia WiFi Mesh Middleware • Supports full triple play services, including voice, video and data• Allows service-per-port configurations • Supports IP video distribution• Supports easy-to-use USB 3.0 connections for external disk drives and home network attached storage (NAS)• Delivers voice services using VoIP• Delivers video services efficiently with multicasting or unicasting• Facilitates network management using Nokia 5520 AMS• Flexible video delivery options of Ethernet or wireless to set-top boxes (STBs) Technical specifications Physical• Height: 195 mm (7.7 in)• Width: 245 mm (9,65 in)• Depth: 37 mm (1.46 in)• Weight: 650g (1.4lb)Installation• Desk mountable• Wall mountable with bracketOperating environment• Temperature: -5°C to 45°C (23°F to 113°F)• Relative humidity: 10% to 90%Power requirements• Local powering with 12 V input (feed uses external AC/DC adapter)• Dying gasp support• Power consumption: <36 WXGS PON uplinks• Wavelength: 1260 nm–1280 nm upstream; 1575 nm–1580 nm downstream• G.9807.1 XGS PON standards compliant: 4 dBm ~ 9 dBm launch power; -28 dBm ~ -9 dBm for receiving• SC/APC connector• 10 G burst mode upstream transmitter• 10 G downstream receiver• G.9807.1-compliant 10 GPON Encapsulation Method (XGEM) framing• Flexible mapping between XGEM ports andT-CONT• Advanced Encryption Standard (AES) 128• Forward error correction (FEC)• Activation with automatic discovered serial number and password• Remote software image download• BOSA On Board (BOB) type laser, SC/APC connectorEthernet interfaces• 10/100/1000Base-T interface with RJ-45 connectors• Wi-Fi Protected Access (WPA) support, including pre-shared key (WPA-PSK), WPA2, WPA3• Forwarding• Ethernet port auto-negotiation or manual configuration with medium dependent interface /medium dependent interface crossover (MDI/ MDIX)• Virtual switch based on IEEE 802.1q virtual LAN (VLAN)• VLAN tagging/de-tagging per Ethernet port and marking/remarking of IEEE 802.1p• IP type of service/differentiated services code point (ToS/DSCP) to IEEE 802.1p mapping for untagged frames• Class of service (CoS) based on VLAN ID, IEEE • 802.1p bit• Internet Group Management Protocol (IGMP)v2/ v3 snooping POTS interfaces• Two FXS ports for VoIP service with RJ-11 connectors• Multiple codecs: ITU-T G.711, ITU-T G.729• SIP (RFC 3261)• ITU-T G.168 echo cancellation• Services: caller ID, call waiting, call hold, 3-way call, call transfer, message waiting indication• 5 ringer equivalence numbers (RENs) per line • Dual-tone multi-frequency (DTMF) dialing• Balanced sinusoidal ring signal, 55 V root mean square (RMS)WLAN interfaces• 2x2 MIMO on 802.11b/g/n/ax• 2x2 MIMO on 802.11a/n/ac/ax• 3 dBi internal antenna• WPA, WPA-PSK/TKIP, WPA2, WPA2-PSK/AES, WPA3• Media access control (MAC) filtersUSB interface• One USB 3.0 interfacesResidential gateways• IPv4 and IPv6• Point-to-Point Protocol over Ethernet (PPPoE) and IP over Ethernet (IPoE)• NAT, DMZ and firewall• Dynamic Host Configuration Protocol (DHCP) and domain name system (DNS) proxy• IGMP proxy• Supports TR-069About NokiaWe create the technology to connect the world. Only Nokia offers a comprehensive portfolio of network equipment, software, services and licensing opportunities across the globe. With our commitment to innovation, driven by the award-winning Nokia Bell Labs, we are a leader in the development and deployment of 5G networks.Our communications service provider customers support more than 6.4 billion subscriptions with our radio networks, and our enterprise customers have deployed over 1,300 industrial networks worldwide. Adhering to the highest ethical standards, we transform how people live, work and communicate. For our latest updates, please visit us online and follow us on Twitter @nokia.Nokia operates a policy of ongoing development and has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions. Nokia assumes no responsibility for any inaccuracies in this document and reserves the right to change, modify, transfer, or otherwise revise this publication without notice.Nokia is a registered trademark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.© 2020 Nokia Nokia OY J Karakaari 7 02610 Espoo FinlandLEDs• Power • Link • Auth • LAN (1~4)• TEL (1~2)• VoIP• Wi-Fi Protected Setup (WPS)• WLAN 2.4G/5G • USB • InternetSafety and electromagnetic interference (EMI)• Protection of over voltage/currentRegulatory compliances• CE Mark • FCC Mark。

Dell EMC S4100-ON 10GbE Switch Datasheet说明书

The S4100-ON 10GbE switches comprise Dell EMC’s latest disag-gregated hardware and software data center networking solutions, providing state-of-the-art 100GbE uplinks, fibre channel connectivity and a broad range of functionality to meet the growing demands of today’s data center environment. These innovative, next-generation top-of-rack open networking switches offer optimum flexibility and cost-effectiveness for the enterprise, mid-market and Tier2 cloud service provider with demanding compute and storage traffic envi-ronments.The compact S4100-ON models provide industry-leading density with up to 48 ports of 10GbE or up to 48 ports of 10GBaseT ports,2 ports of 40GbE and 4 ports of 100GbE in a 1RU form factor. TheS4148U-ON model can support up to 28 8/16G fibre channel ports, or 16 ports of 32G* fibre channel ports. The S4112-ON is a half-rack width model that supports up to 12 ports of 10GbE or 12 ports 10GBaseT, and 3 ports of 100GbE.Using industry-leading hardware and a choice of Dell EMC’s OS10 or select 3rd party network operating systems and tools, the S4100-ON Series offers flexibility by provision of configuration profiles and deliv-ers non-blocking performance for workloads sensitive to packet loss. The compact S4100-ON models provide multirate speed, enabling denser footprints and simplifying migration to 100Gbps.Also unique to the S4100-ON series is the ability to meet the demands of converged and virtualized data centers by offering unified ports (S4148U) and hardware support for L2 and L3 VXLAN Gateway. Priority-based flow control (PFC), data center bridge exchange (DCBX) and enhanced transmission selection (ETS) make the S4100-ON ideally suited for DCB environments.Dell Networking S4100-ON switches support the open source Open Network Install Environment (ONIE) for zero touch installation of Dell EMC’s OS10 networking operating system, as well as of alternative network operating systems.Maximum performance and functionalityThe S4100-ON series are high-performance, multi-function,1/10/25/40/50/100 GbE and 8/16/32G FC Top-of-Rack (ToR) switches purpose-built for applications in high-performance data center, cloud and computing environments. Architectural features to optimize data center network flexibility, efficiency and availability include IO panel to PSU airflow or PSUto IO panel airflow for hot/cold aisle environments and redundant, hot-swappable power supplies and fans.Key applications• Organizations looking to enter the software-defined data center era with a choice of networking technologies designed tomaximize flexibility• Multi-functional 1/10/25/40/50/100 GbE switching in HighPerformance Computing Clusters or other business-sensitivedeployments requiring the highest bandwidth. High-density1/10 GbE ToR server access in high-performance data centerenvironments• iSCSI and FC storage deployment, including DCB convergedlossless transactions• Small-scale data center fabric implementation via the S4100-ON switch in leaf and spine along with S-Series 1/10GbE T oR switches • VXLAN layer 2/layer 3 gateway support (available in hardware only)Key features• 1RU high-density 10/40/100 GbE ToR switches with up to 48ports of 10 GbE (SFP+) or up to 48 ports of 10GBaseT ports,or up to 28 ports of 8/16 fibre channel, two ports of 40 GbE(QSFP+), and up to four ports of 100GbE (QSFP28) or fourports of 8/16/32G fibre channel• The S4112 is a 1RU, half-rack width 10/100GbE ToR switch with up to 12 ports of 10GbE (SFP+) or up to 12 ports of 10GBaseT ports, and up to three ports of 100GbE (QSFP28).• Multi-rate 100GbE ports support 10/25/40/50 GbE. 40GbEports support 10GbE. 10GbE ports support 1GbE. Up to fourdifferent simultaneous speeds are possible in a given profile.• Supports dynamic reconfiguration of unified ports on S4148Uproduct as 10GbE or 8/16G FC on SFP+ ports, and 25GbE orDELL EMC NETWORKING S4100-ONHigh-performance open networking top-of-rack switches with multirate Gigabit Ethernet and unified ports• 1.76Tbps (full-duplex) non-blocking, cut-through switching fabric delivers line-rate performance under full load on S4148F-ON,S4148FE-ON, S4148T-ON and S4148U-ON.• 960Gbps (full-duplex) non-blocking, cut-through switching fabric delivers line-rate performance under full load on S4128F-ON and S4128T-ON.• 840Gbps (full-duplex) non-blocking, cut-through switching fabric delivers line-rate performance under full load on S4112F-ON andS4112T-ON.• VXLAN gateway functionality support for bridging and routing the non-virtualized and the virtualized overlay networks with line rate performance• Converged Network support with DCB• IO panel to PSU airflow or PSU to IO panel airflow• Redundant, hot-swappable power supplies and fans (S4112-ONhas redundant, fixed power supplies and fans)• Support for 10GBASE-LRM optics over OM1/OM2 fiber onS4148FE-ON product (not supported on other products in S4100 product family)• IEEE 1588v2 supported (hardware only) on 48 port modelsKey Features with Dell EMC Networking OS10• Consistent DevOps framework across compute, storage andnetworking elements• Standard networking features, interfaces and scripting functionsfor legacy network operations integration• Standards-based switching hardware abstraction via SwitchAbstraction Interface (SAI)• Pervasive, unrestricted developer environment via Control PlaneServices (CPS)• OS10 Enterprise Edition software enables Dell EMC layer 2 and 3 switching and routing protocols with integrated IP services, quality of service, manageability and automation features• Leverage common open source tools and best practices (datamodels, commit rollbacks)• Increase VM Mobility region by stretching L2 VLAN within oracross two DCs with unique VLT capabilities• Scalable L2 and L3 Ethernet Switching with QoS, ACL and a fullcomplement of standards based IPv4 and IPv6 features including OSPF, BGP and PBR• Enhanced mirroring capabilities including local mirroring, RemotePort Mirroring (RPM), and Encapsulated Remote Port Mirroring(ERPM).• Converged network support for Data Center Bridging, with priority flow control (802.1Qbb), ETS (802.1Qaz), DCBx and iSCSI TLVPhysical1 RJ45 console/management port with RS232signaling1 RJ45 micro-USB-B console port1 RJ45 10/100/1000Base-T management EthernetportSize: 1 RU, 1.75”(h) x 17”(w) x 18”(d)(4.4cm (h) x 43.1cm (w) x 45.7cm (d))S4112: 1.7”(h) x 8.28”(w) x 18”(d)(4.125cm (h) x 20.9cm (w) x 45cm (d)Power supply: 100–240 VAC 50/60 HzPower supply (DC), applicable to S4412: rated -40 to -72 VDCMax. current draw per system: 6A/5A at 100/120V AC; 3A/2.5A at 200/240V ACS4112: 2A/1.7A at 100/120V AC; 1A/0.8A at200/240V ACS4112 (DC): -40V/5A, -48V/4.2A, -72V/2.8A Max. operating specifications:Operating temperature: 41° to 104° F (5° to 40° C)Operating humidity: 5 to 85% (RH), non-condensingMax. non-operating specifications:Storage temperature: -40° to 149°F (-40° C to 65° C)Storage humidity: 5 to 95% (RH), non-condensingRedundancyHot swappable redundant power (not applicable to S4112)Hot swappable redundant fans (not applicable to S4112)Fixed, redundant power supply and fan for S4112 PerformancePacket buffer memory 12MBCPU memory: 4GBMAC addresses: 272K (in Scaled L2 mode) PVST: 128 instancesARP table 200K (in Scaled L3 hostmode)IPv4 routes: 200K (in Scaled L3routes mode)IPv6 hosts: 64KIPv6 routes: 130K (in Scaled L3 routesmode)Multicast hosts: 8KLink aggregation: 32 links per group, 128groupsLayer 2 VLANs: 4KLayer3 VLANs: 500MSTP: 32 instancesLAG load balancing: Based on layer 2, IPv4 or IPv6 headersL2 Ingress ACL: 6KL2 Egress ACL: 1KIPv4 Ingress ACL: 6KIPv4 Egress ACL: 1KIPv6 Ingress ACL: 3KIPv6 Egress ACL: 500Storage performance parametersiSCSI Sessions: 255iSCSI Target: 16F-Port: Max F-Port Sessions: 526F-Port: Max members in a zone: 526Dell EMC Networking OS10.3 Enterprise Edition Software SpecificationsIEEE Compliance802.1AB LLDPTIA-1057 LLDP-MED802.1s MSTP802.1w RSTP802.3ab G igabit Ethernet (1000Base-T)802.3ad Link Aggregation with LACP802.3ae 10 Gigabit Ethernet (10GBase-X)802.3ba 40 Gigabit Ethernet (40GBase-X)802.3i Ethernet (10Base-T)802.3u Fast Ethernet (100Base-TX)802.3z Gigabit Ethernet (1000BaseX)802.1D Bridging, STP802.1p L2 Prioritization802.1Q V LAN Tagging, GVRP802.1Qbb PFC802.1Qaz ETS802.1s MSTP802.1w RSTPPVST+802.1X Network Access Control802.3ab Gigabit Ethernet (1000BASE-T)or breakout802.3ac Frame Extensions for VLAN T agging802.3ad Link Aggregation with LACP802.3ae 10 Gigabit Ethernet (10GBase-X)802.3ba 40 Gigabit Ethernet (40GBase-SR4, 40GBase-CR4, 40GBase-LR4,100GBase-SR10, 100GBase-LR4,100GBase-ER4) on optical ports802.3bj 100 Gigabit Ethernet802.3u Fast Ethernet (100Base-TX) on mgmt ports802.3x Flow Control802.3z Gigabit Ethernet (1000Base-X) with QSAANSI/TIA-1057 LLDP-MEDJumbo MTU support 9,416 bytesLayer2 Protocols802.1D Compatible802.1p L2 Prioritization802.1Q VLAN Tagging802.1s MSTP802.1w RSTP802.1t RPVST+802.3ad Link Aggregation with LACPVLT (Virtual Link Trunking)VLT EnhancementsMinloss UpgradesVLT Proxy GatewayRVPST over VLTDCB, FSB, iSCSI over VLTRSPAN over VLTRFC Compliance768 UDP793 TCP854 Telnet959 FTP1321 MD51350 TFTP2474 Differentiated Services2698 Two Rate Three Color Marker3164 Syslog4254 SSHv2General IPv4 Protocols791 IPv4792 ICMP826 ARP1027 Proxy ARP1035 DNS (client)1042 Ethernet Transmission1191 Path MTU Discovery1305 NTPv41519 CIDR1812 Routers1858 IP Fragment Filtering2131 DHCP (server and relay)5798 VRRP3021 31-bit Prefixes3046 DHCP Option 82 (Relay)1812 Requirements for IPv4 Routers1918 Address Allocation for PrivateInternets2474 Diffserv Field in IPv4 and Ipv6H eaders2597 Assured Forwarding PHB Group3195 Reliable Delivery for Syslog3246 Expedited Forwarding PHB4364 VRF-lite (IPv4 VRF with OSPF andBGP)*COPP: Control Plane PolicingPolicy Based RoutingGeneral IPv6 Protocols1981 Path MTU Discovery*2460 IPv62461 Neighbor Discovery*2462 Stateless Address AutoConfig2463 ICMPv62464 Ethernet Transmission2675 Jumbo grams3587 Global Unicast Address Format4291 IPv6 Addressing2464 Transmission of IPv6 Packets overEthernet Networks2711 IPv6 Router Alert Option4007 IPv6 Scoped Address Architecture4213 Basic Transition Mechanisms for IPv6Hosts and Routers4291 IPv6 Addressing Architecture5095 Deprecation of T ype 0 RoutingHeaders in IPv6IPv6 Management support (telnet, FTP,TACACS, RADIUS, SSH, NTP)OSPF1587 NSSA1745 OSPF/BGP interaction1765 OSPF Database overflow2154 MD52328 OSPFv22370 Opaque LSA3101 OSPF NSSA3623 OSPF Graceful Restart (Helpermode)*Security2865 RADIUS3162 Radius and IPv64250, 4251, 4252, 4253, 4254 SSHv24301 Security Architecture for IPSec*4302 IPSec Authentication Header*4303 ESP Protocol*BGP1997 Communities2385 MD52439 Route Flap Damping2796 Route Reflection2842 Capabilities2918 Route Refresh3065 Confederations4271 BGP-44360 Extended Communities4893 4-byte ASN5396 4-byte ASN Representation5492 Capabilities AdvertisementLinux DistributionDebian Linux version 8.4Linux Kernel 3.16MIBSIP MIB– Net SNMPIP Forward MIB– Net SNMPHost Resources MIB– Net SNMPIF MIB – Net SNMPLLDP MIBEntity MIBLAG MIBDell-Vendor MIBTCP MIB – Net SNMPUDP MIB – Net SNMPSNMPv2 MIB – Net SNMPNetwork ManagementSNMPv1/2SSHv2FTP, TFTP, SCPSyslogPort MirroringRADIUS802.1XSupport Assist (Phone Home)Netconf APIsXML SchemaCLI Commit (Scratchpad)sFlowAutomationControl Plane Services APIsLinux Utilities and Scripting T oolsQuality of ServiceAccess Control ListsPrefix ListRoute-MapRate Shaping (Egress)Rate Policing (Ingress)Scheduling AlgorithmsRound RobinWeighted Round RobinDeficit Round RobinStrict PriorityWeighted Random Early DetectData center bridging802.1Qbb Priority-Based Flow Control802.1Qaz Enhanced Transmission Selection (ETS)* Data Center Bridging eXchange (DCBx)DCBx Application TLV (iSCSI, FCoE*)Fibre Channel (applicable only to S4148U-ON) FCF F-PortFC ZoningRegulatory complianceSafetyUL/CSA 60950-1, Second EditionEN 60950-1, Second EditionIEC 60950-1, Second Edition Including All National Deviations and Group DifferencesEN 60825-1 Safety of Laser Products Part 1:EquipmentClassification Requirements and User’s GuideEN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fibre Communication Systems FDA Regulation 21 CFR 1040.10 and 1040.11 EmissionsAustralia/New Zealand: AS/NZS CISPR 32: Class A Canada: ICES-003, Issue-4, Class A Europe: EN 55032: 2015+A1:2007 (CISPR 32),Class A Japan: VCCI V3/2009 Class AUSA: FCC CFR 47 Part 15, Subpart B:2009, Class AImmunityEN 300 386 V1.4.1:2008 EMC for NetworkEquipmentEN 55024: 1998 + A1: 2001 + A2: 2003EN 61000-3-2: Harmonic Current EmissionsEN 61000-3-3: Voltage Fluctuations and FlickerEN 61000-4-2: ESDEN 61000-4-3: Radiated ImmunityEN 61000-4-4: EFTEN 61000-4-5: SurgeEN 61000-4-6: Low Frequency ConductedImmunityRoHSAll S-Series components are EU RoHS compliant.CertificationsJapan: VCCI V3/2009 Class AUSA: FCC CFR 47 Part 15, Subpart B:2009, Class AWarranty1 Year Return to DepotIT Lifecycle Servicesfor NetworkingExperts, insights and easeOur highly trained experts, withinnovative tools and proven processes,help you transform your IT investmentsinto strategic advantages.Plan & DesignLet us analyze yourmultivendor environmentand deliver a comprehensivereport and action plan to buildupon the existing network andimprove performance.Deploy & IntegrateGet new wired or wirelessnetwork technology installedand configured with ProDeploy.Reduce costs, save time, andget up and running fast.EducateEnsure your staff builds theright skills for long-termsuccess. Get certified on DellEMC Networking technologyand learn how to increaseperformance and optimizeinfrastructure.Manage & SupportGain access to technical expertsand quickly resolve multivendornetworking challenges withProSupport. Spend less timeresolving network issues andmore time innovating.OptimizeMaximize performance fordynamic IT environments withDell EMC Optimize. Benefitfrom in-depth predictiveanalysis, remote monitoringand a dedicated systemsanalyst for your network.RetireWe can help you resell or retireexcess hardware while meetinglocal regulatory guidelines andacting in an environmentallyresponsible way.Learn more at/LifecycleServicesLearn more at /Networking * Roadmap。

IS104GPS-2F 6-port Gigabit managed PoE switch User

User ManualIS104GPS-2F6-port Gigabit managed PoE switchInstallation Manual Introduction<User Manual>mainly introduces the hardware features, installation methods,and precautions during the installation of IS104GPS-2F.This manual includes the following sections:Chapter1:Product introduction.Briefly describe the basic functions and features of the switch,detailed hardware and software specifications and appearance information.Chapter2:Hardware Connections.Guide the connection of switch with other devices and precautions.Chapter3:Product Installation.Guide the hardware installation method and precautions.Chapter4:Product Packaging and Use Recommendations.Chapter1Product Introduction1.1Product introductionThe IS104GPS-2F is a6-port Gigabit-managed industrial PoE switch that provides4Gigabit ports and2Gigabit SFP ports.Each PoE port can provide up to46W for IEEE802.3af/at compatible powered devices(PDs).It is especially suitable for applications where AC power is not easily available or high wiring costs.It support EMC industrial grade4protection;corrugated high-strength aluminum profile housing,IP40grade,low power design,seismic rail mounting,-40°C-75°C operating temperature, can work in harsh environments;IS104GPS-2F also supports Apollo cloud one-stop management platform for status checking and management monitoring,to make it become a reliable solution for Intelligent transportation,video surveillance and other harsh industrial environments.21.2FeaturesFull Gigabit Ethernet port4full Gigabit RJ45PoE network port,and2Gigabit SFP ports, breaking the traditional100M limitation,data transmission will not stuckBroadcom high performance industrial grade chip for more stable performanceBroadcom high-performance industrial-grade chips that dramatically increase network data processing ratesPowerful working environmentEMC industrial grade4protection;corrugated high-strength aluminum profile housing,IP40grade,low power design,seismic rail mounting,-40°C-75°C operating temperature,can work in harsh environments3Support Apollo cloud platform one-stop management Support cloud platform to visualize management of switches and attached power devices,making operation and maintenance management easier1.3Software and hardware specificationsHardware specificationChipBroadcom high performance chipFlash16MBRAM64MBDDRPort410/100/1000M RJ45Port21000M SFP PortPoE Power supply 410/100/1000MbpsRJ45Port support 802.3af/atPoE power supplyThe maximum power per port is46W4Indicator 6Link/Act indicator4POEindicatorALM Alarm indicatorP1、P2Power Indicator1SYS indicatorPerformance Forward mode:store and forward Backplane bandwidth:12Gbps Packet forwarding rate:8.9Mpps Support8K MAC address table depthStandard protocol IIEEE802.3:Ethernet Media Access Control (MAC)ProtocolIEEE802.3i:10BASE-T EthernetIEEE802.3u:100BASE-TX Fast EthernetIEEE802.3ab:1000BASE-T Gigabit Ethernet IEEE802.3z:1000BASE-X Gigabit Ethernet (optical fiber)5IEEE802.3ad:Standard method for performing link aggregationIEEE802.3x:Flow ControlIEEE802.1p:LAN Layer2Qos/Cos protocol for traffic prioritization(multicast filtering)IEEE802.1q:VLAN Bridge OperationIEEE802.1d:STP spanning treeIEEE802.1s:MSTP Spanning TreeIEEE802.1w:RSTP Spanning TreeIEEE802.3afIEEE802.3atIndustry Standard EMI:FCCCFR47Part15,EN55022/CISPR22, Class AEMS:IEC61000-4-2(ESD):±8kV(contact),±15kV6(air)IEC61000-4-3(RS):10V/m(80MHz-2GHz)IEC61000-4-4(EFT):Power Port:±4kV;Data Port:±2kVIEC61000-4-5(Surge):Power Port:±2kV/DM,±4kV/CM;Data Port:±6kVIEC61000-4-6(CS):3V(10kHz-150kHz);10V (150kHz-80MHz)IEC60068-2-6(Vibration)IEC60068-2-27(Shock)IEC60068-2-32(Free Fall)Operation environment Working temperature:-40~75°CStorage temperature:-40to75°CRelative humidity:5%to95%(no condensation)7Certification CE,FCC,RoHSMean timebetweenfailures(MTBF)100,000hrsWarranty3yearsLightningprotectionNetwork port:±6KV power port:±4KV ESD Contact:±8KV Air:±15KVPhysical specification Input:48-56VDCHousing:IP40grade protection,corrugated high strength metal housingInstallation:DIN rail mountingSize:163mm×46.5mm×110mm，Weight：1kg8Software specification101112131.4AppearanceIndicator StatusDescriptionP1、P2On The corresponding power supply working normally.Off The corresponding power supply is not connected or working abnormal.SYS Blink System is running normally14ingOff/ alwa ys brig ht System operation is abnormal/start unsuccessfulALM On Alarm start upOff Alarm not triggeredLink/ACT F1-F4BlinkingSFP port is working normalOff SFP port is working abnormally/port is not connected1516Chapter 2.Hardware Connection2.1Connect to RJ45portUse the network cable to connect the switch to the RJ45port of network device.Normally,the switch's downlink port has POE power supply enabled by default.It can support POE power supply to AP ,bridge,network camera and other PDs which comply with IEEE802.3af and IEEE802.3atstandards.2.2Connect to the SFP portThe SFP port of the IS104GPS-2F supports only Gigabit fiber modules.It is recommended to use standard SFP module products. The process of installing a fiber module on a switch is as follows:1.Grasp the fiber module from the side and insert it smoothly along the SFP port slot of the switch until the fiber module is in close contact with the switch;2.Confirm the Rx and Tx ports of the fiber module when connecting.Insert one end of the fiber into the Rx and Tx ports to ensure that the Tx and Rx ends of the interface are correctly connected,and the other end of the fiber is connected to another device.3.After power-on,check the status of the corresponding indicator.If the indicator is on,the link is up.If not,please check the line and confirm that the peer device is enabled.1718Attention:It is not allowed to excessively bend the fiber,and its radius of curvature should be no less than 10cm;Ensure the cleanliness of the fiber end face;Please do not look directly into the fiber optic connector with your eyes,as this may cause eye damage.2.3Check before power-onCheck that the power supply of the power outlet meets the switch specifications.Check that the power supply,switch,and rack are properly grounded.Check whether the switch is connected to other network devices.2.4Device initializationThe switch will automatically initialize after the power is turnedonand the power switch is turned on.The indicator light will appear as follows:After the power is turned on,the power indicator remains steady, the SYS light enters the blinking state,and the system runs normally.The indicator of each port indicates the connection status of each port,indicating that the switch has started to work normally.Chapter3,Product InstallationBefore installation,confirm the operating environment of the equipment:power supply voltage,installation space,installation method,etc.Please carefully confirm the following installation requirements:-Check for cables and connectors required for19installation♦-Check whether the cable is in place(not more than100m)according to reasonable configuration requirements.♦-The product does not provide mounting components,the user must prepare the components of the selected installation type:screws,nuts and tools to ensure reliable installationPower requirements：12-56V DC(12-48V nonsupportPoE，support date exchange only)Environmental requirements:Working temperature:-40~75°CStorage temperature:-40to75°CRelative humidity:5%to95%(no condensation) Power input20215pin 5.08mmterminalInput range：12-56VDCP1&P2dual redundant power supply,Support reverse connection protectionGround protectionGroundprotectionConnect to groundRail mountingChapter4,Packing list and use recommendations 4.1Product packagingItem Quantity Description Switch1set\Phoenix terminal1*5,1*2eachper one unit Connect to power and alarm switchWarranty card1piece For after-sales maintenance User Manual1copy Used to guide users to installswitches4.2Recommendations1.For safety reasons,non-professionals should not open the product casing;2.Pay attention to the danger of strong electricity and safe protection when the product is powered on;223.Do not use the switch in a humid environment to prevent water from entering the fuselage through the casing,resulting in damage to the machine;4.In the state of power-on of the product,please do not plug and unplug the cable if non special case;5.Please do not place heavy objects on the switch to avoid accidents;6.It is recommended to use the switch indoors.It is recommended to add a waterproof box when using it outdoors. Note:The pictures in the manual are for reference only,whichever is subject to the actual product.23。

CommScope OM4 Uniboot 双纤维接线缆说明书

Ultra Low Loss OM4, LC/UPC Uniboot to LC/UPC Uniboot, 1.5 mmDuplex Fiber Patch Cord, PlenumPatch cords using Uniboot technology combine, modularity, flexibility with easy insertion andremoval from connectivityUniboot connectors feature an adjustable polarity via a manual and independent rotation of eachsingle connector body without exposing the fibersUniboot technology features a push-pull mechanism operated by squeezing the connector bootProduct ClassificationRegional Availability Asia | Australia/New Zealand | Europe | Latin America | Middle East/Africa | North AmericaPortfolio CommScope®Product Type Fiber patch cord, duplexProduct Brand SYSTIMAX ULLOrdering Note For lengths greater than 999 ft (304 m), orders must be in meters | Minimum lengthmay vary based on cable configurationGeneral SpecificationsColor, connector A BeigeColor, connector B BeigeInterface, Connector A LC/UPCInterface Feature, connector A UnibootInterface, Connector B LC/UPCInterface Feature, connector B UnibootJacket Color AquaTotal Fibers, quantity2DimensionsCable Assembly Length Range (m) 1 – 999Cable Assembly Length Range (ft) 1 – 999Diameter Over Jacket 1.5 mm | 0.059 inOrdering Tree17Page ofMechanical SpecificationsCable Retention Strength, maximum11.24 lb @ 0 ° | 4.40 lb @ 90 °Optical SpecificationsFiber Mode MultimodeFiber Type OM4, LazrSPEED®Insertion Loss, maximum0.15 dBReturn Loss, minimum35 dBEnvironmental SpecificationsOperating Temperature-10 °C to +60 °C (+14 °F to +140 °F)Environmental Space PlenumRegulatory Compliance/CertificationsAgency ClassificationCHINA-ROHS Above maximum concentration valueISO 9001:2015Designed, manufactured and/or distributed under this quality management system ROHS Compliant/ExemptedUK-ROHSCompliant/ExemptedIncluded Products760251283P-002-DU-5K-M15AQ/AY/LTS–Fiber indoor cable, LazrSPEED® Plenum Light Duty Interconnect Cordage, 2 fiber, MultimodeOM4, Meters jacket marking, Aqua jacket color860660825–LC UniBoot 1.5 mm Multimode Aqua LC UNIBOOT duplex connectorPage of27Page of 37Fiber indoor cable, LazrSPEED® Plenum Light Duty InterconnectCordage, 2 fiber, Multimode OM4, Meters jacket marking, Aqua jacketcolorProduct ClassificationRegional AvailabilityAustralia/New Zealand | EMEA | Latin America | Middle East/Africa | North America PortfolioCommScope®Product TypeFiber indoor cable Product Series P-DUGeneral SpecificationsCable TypeMPO trunk cable Construction TypeNon-armored Subunit TypeGel-free Jacket ColorAqua Jacket MarkingMeters Total Fiber Count 2DimensionsDiameter Over Jacket 1.5 mm | 0.059 inRepresentative ImageMechanical SpecificationsMinimum Bend Radius, loaded 30 mm | 1.181 in20 mm | 0.787 inMinimum Bend Radius, unloaded20 mm | 0.787 inTensile Load, long term, maximum30 N | 6.744 lbfTensile Load, short term, maximum100 N | 22.481 lbfCompression 4 N/mm | 22.841 lb/inCompression Test Method FOTP-41 | IEC 60794-1 E3Impact0.74 N-m | 6.55 in lbImpact Test Method FOTP-25 | IEC 60794-1 E4Strain See long and short term tensile loadsStrain Test Method FOTP-33 | IEC 60794-1 E1Twist10 cyclesTwist Test Method FOTP-85 | IEC 60794-1 E7Optical SpecificationsFiber Type OM4, LazrSPEED®Environmental SpecificationsInstallation temperature0 °C to +70 °C (+32 °F to +158 °F)Operating Temperature0 °C to +70 °C (+32 °F to +158 °F)Storage Temperature-40 °C to +70 °C (-40 °F to +158 °F)Cable Qualification Standards Telcordia GR-409Environmental Space PlenumFlame Test Listing NEC OFNP (ETL) and c(ETL)Flame Test Method NFPA 130 | NFPA 262Environmental Test SpecificationsHeat Age0 °C to +85 °C (+32 °F to +185 °F)Heat Age Test Method IEC 60794-1 F9Low High Bend0 °C to +70 °C (+32 °F to +158 °F)Low High Bend Test Method FOTP-37 | IEC 60794-1 E11Temperature Cycle0 °C to +70 °C (+32 °F to +158 °F)Temperature Cycle Test Method FOTP-3 | IEC 60794-1 F1Packaging and Weights2.2 kg/km | 1.478 lb/kft47Page ofCable weight 2.2 kg/km | 1.478 lb/kftRegulatory Compliance/CertificationsAgency ClassificationCHINA-ROHS Below maximum concentration valueREACH-SVHC Compliant as per SVHC revision on /ProductCompliance ROHS CompliantUK-ROHSCompliant* FootnotesOperating Temperature Specification applicable to non-terminated bulk fiber cablePage of57LC UniBoot 1.5 mm Multimode Aqua LC UNIBOOT duplex connectorProduct ClassificationRegional Availability Asia | Australia/New Zealand | EMEA | Latin America | North AmericaPortfolio CommScope®Product Type Fiber connectorProduct Brand LazrSPEED® | SYSTIMAX ULLProduct Series UnibootGeneral SpecificationsBody Style DuplexColor BeigeInterface LC/UPCInterface Feature UnibootDimensionsCompatible Cable Diameter 1.5 mm | 0.059 inMaterial SpecificationsFerrule Material ZirconiaMechanical SpecificationsCable Retention Strength, maximum11.24 lb @ 0 ° | 4.40 lb @ 90 °Optical SpecificationsFiber Mode MultimodeInsertion Loss Change, mating0.3 dBOptical Components Standard ANSI/TIA-568-C.3Insertion Loss, maximum0.1 dBInsertion Loss, ULL, maximum0.15 dB0.13 dB67Page ofInsertion Loss, ULL, typical0.13 dBReturn Loss, minimum35 dBPackaging and WeightsPackaging quantity1* FootnotesInsertion Loss Change, mating TIA-568: Maximum insertion loss change after 500 matings77Page of。

华为3Com培训大纲

华为3技术培训大纲目录1培训项目说明 (4)1.1华为3认证培训 (4)1.1.1华为3认证网络工程师（HE）培训――构建中小企业网络 (4)1.1.2华为3认证高级网络工程师（HCSE）培训――构建企业级交换网络 (5)1.1.3华为3认证高级网络工程师（HCSE）培训――构建企业级路由网络 (6)1.1.4华为3认证高级网络工程师（HCSE）培训――企业级网络方案设计 (7)1.1.5华为3认证网络排错专家（HCTE）培训――网络故障诊断与排除 (7)1.1.6华为3认证网络销售工程师（HSE）培训 (8)1.2Quidway系列路由器产品培训 (9)1.2.1Quidway系列中低端网络产品工程师培训 (9)1.2.2Quidway系列中低端路由器工程师培训 (10)1.2.3Quidway R1700/2600/3600/2500/1600系列路由器工程师培训 (12)1.2.4Quidway NetEngine16E/08E/05路由器工程师培训 (13)1.2.5Quidway NetEngine80/40路由器工程师培训 (13)1.3Quidway系列以太网交换机产品培训 (14)1.3.1Quidway系列中低端以太网交换机工程师培训 (14)1.3.2Quidway S1000/2000/3000系列以太网交换机工程师培训 (15)1.3.3Quidway S3500/5500系列以太网交换机工程师培训 (16)1.3.4Quidway S6500系列以太网交换机工程师培训 (17)1.3.5Quidway S8016路由交换机工程师培训 (18)1.3.6Quidway MA5200E/F以太网接入服务器工程师培训 (19)1.4Quidway Eudemon系列防火墙产品培训 (19)1.4.1Quidway Eudemon 100/200系列防火墙工程师培训 (19)1.5华为3业务管理类产品培训 (21)1.5.1CAMS综合访问管理服务器工程师培训 (21)1.63产品培训 (22)1.6.13产品技术人员培训系列 (22)1.6.23产品销售人员培训系列 (23)2课程描述 (24)CA-001 Quidway系列中低端路由器与以太网交换机设备介绍 (24)CA-002 路由器和以太网交换机升级与日常维护 (25)EF-001 Quidway Eudemon 100/200系列防火墙产品介绍 (26)EF-002 链路层协议PPP&PPPoE配置 (27)EF-003 防火墙安全策略 (28)EF-004 攻击防X (29)EF-005 VPN (30)EF-006 VRRP、HRP协议配置 (31)EF-007 QoS (32)HL-001 网络基础知识 (33)HL-002 TCP/IP协议与子网规划 (34)HL-003 常见网络接口与线缆 (35)HL-004 以太网交换机原理及配置 (36)HL-005 路由器基本原理及配置 (37)HL-006 广域网协议原理及配置 (38)HL-007 路由协议原理及配置 (39)HL-008 访问控制列表和地址转换 (40)HL-009 DCC、ISDN原理及配置 (41)HL-010 备份中心原理及配置 (42)HL-021 华为3全系列网络产品介绍 (43)HL-022 网络技术专题简介 (44)HL-023 华为3网络解决方案 (45)HM-020 局域网概述 (46)HM-021 VLAN基础 (47)HM-022 VLAN间路由 (48)HM-023 STP (49)HM-024 组播技术原理与实现 (50)HM-025 以太网安全 (51)HM-040 OSPF协议原理及配置 (52)HM-041 BGP协议原理及配置 (53)HM-042 路由策略与引入原理及配置 (54)HM-043 网络安全特性 (55)HM-044 VPN原理及其配置 (56)HM-045 服务质量保证 (57)HM-060 网络方案设计概述 (58)HM-061 局域网设计 (59)HM-062 广域网设计 (60)HM-063 IP网络设计 (61)HM-064 特性设计 (62)HM-065 设计案例 (63)HM-080 故障诊断与排除概述 (64)HM-081 物理层和以太网故障诊断与排除 (65)HM-082 广域网故障诊断与排除 (66)HM-083 TCP/IP故障诊断与排除 (67)HM-084 路由协议故障诊断与排除 (68)HM-085 其他业务故障诊断与排除 (69)HM-086 以太网交换机故障诊断与排除 (70)MC-001 CAMS系统概述 (71)MC-002 计费组件 (72)MC-003 LAN接入组件 (73)MC-004 IP Phone组件 (74)MC-005 Dial-in接入组件 (75)MC-006 Portal服务组件 (76)MQ-001 Quidview网络管理系统 (77)MQ-002 Quidview网络管理系统介绍 (78)RH-001 NE16E/08E/05系统概述 (79)RH-002 NE16E/08E/05操作与维护 (80)RH-003 NE16E/08E/05常见问题处理 (81)RH-011 NE80/40系统概述 (82)RH-012 NE80/40操作与维护 (83)RH-013 NE80/40常见问题处理 (84)RL-001 Quidway系列中低端路由器设备介绍 (85)RL-002 R17&26&36&25&16设备介绍 (86)RL-003 R17&26&36常用接口模块 (87)RL-004 常用链路层协议 (88)RL-005 常用路由协议 (89)RL-006 防火墙与地址转换 (90)RL-007 拨号控制中心与备份中心 (91)RL-008 VPN (92)RL-009 QoS (93)RL-010 VoIP (94)RL-011 路由器升级与日常维护 (95)SH-001 S6500系统概述 (96)SH-002 S6500网络基础知识原理及配置 (97)SH-003 S6500网络安全和系统维护原理与配置 (98)SH-004 S6500常见问题处理 (99)SH-011 S8016系统概述 (100)SH-012 S8016操作与维护 (101)SH-013 S8016常见问题处理 (102)SL-001 Quidway系列中低端以太网交换机产品介绍 (103)SL-002 Quidway S1000/2000/3000系列以太网交换机产品介绍 (104)SL-003 Quidway S3500/5500系列以太网交换机产品介绍 (105)SL-004 以太网交换机入门操作 (106)SL-005 端口技术 (107)SL-006 VLAN (108)SL-007 STP和RSTP (109)SL-008 AAA和802.1X (110)SL-009 路由协议 (111)SL-010 组播 (112)SL-011 QoS和ACL (113)SL-012 HGMP1和HGMP2 (114)SL-013 VRRP (115)SM-001 MA5200E/F设备系统介绍与硬件 (116)SM-002 MA5200E/F设备操作与维护 (117)SM-003 MA5200E/F设备故障处理 (118)1 培训项目说明1.1 华为3认证培训1.1.1 华为3认证网络工程师（HE）培训――构建中小企业网络培训对象●有志于从事网络技术工作，希望参加华为3认证的人员。

8766504 10GS4 BLUE ULTRA 10 厚度6A F UTP廉价纤维铜电缆，蓝色外壳

Ultra 10® 10GS4 ETL Verified Category 6A F/UTP Cable, plenum, blue jacket,4 pair count, 1000 ft (305 m) length reelOBSOLETEReplaced By:UN874034704/10CS44P BLU C6A 4/23 F/UTP RL 1KFT CS44P ETL Verified Category 6A F/UTP Cable, plenum, blue jacket, 4 pair count, 1000 ft (305 m) length reelProduct ClassificationRegional Availability North AmericaPortfolio Uniprise®Product Type Twisted pair cableProduct Brand Ultra 10®General SpecificationsProduct Number10GS4ANSI/TIA Category6ACable Component Type HorizontalCable Type F/UTP (shielded)Conductor Type, singles SolidConductors, quantity8Drain Wire Type SolidJacket Color BluePairs, quantity4Separator Type IsolatorTransmission Standards ANSI/TIA-568.2-DDimensionsPage of14Cable Length304.8 m | 1000 ftDiameter Over Jacket, nominal7.01 mm | 0.276 inJacket Thickness0.457 mm | 0.018 inConductor Gauge, singles23 AWGDrain Wire Gauge26 AWGCross Section DrawingElectrical Specificationsdc Resistance Unbalance, maximum 4 %dc Resistance, maximum8 ohms/100 m | 2.438 ohms/100 ftDelay Skew, maximum45 nsDielectric Strength, minimum1500 Vac | 2500 VdcMutual Capacitance at Frequency 5.6 nF/100 m @ 1 kHzNominal Velocity of Propagation (NVP)70 %Operating Frequency, maximum500 MHzOperating Voltage, maximum80 VRemote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for thesafe delivery of power over LAN cable when installed according to ISO/IEC 14763-2,CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-ASafety Voltage Rating300 V24Page ofElectrical Cable PerformanceCS CommScopeSTD Refers to the standard value listed under Transmission Standards in the Electrical Specifications aboveTYP Typical Electrical PerformanceIL Insertion Loss (dB/100m)NEXT Near End Crosstalk (dB/100m)ACR Attenuation to Crosstalk Ratio (dB/100m)PSNEXT Power Sum Near End Crosstalk (db/100m)PSACR Power Sum Attenuation to Crosstalk Ratio (dB/100m)ACRF Attenuation to Crosstalk Ratio - Far End (dB/100m) PSACRF Power Sum Attenuation to Crosstalk Ratio - Far End (dB/100m)RL Return Loss (dB)TCL Transverse Conversion Loss (dB/100m)ELTCTL Equal Level Transverse Conversion Transfer Loss (dB/100m)Freq. MHzIL NEXT ACR PSNEXT PSACR ACRF PSACRF RL TCL ELTCTL STD STD STD STD STD STD STD STD STD STD1 2.174.372.272.370.267.864.82040354 3.865.361.563.359.555.852.82340238 5.360.855.458.853.449.746.724.54016.910 5.959.353.457.351.447.844.8254015167.556.248.854.246.843.740.7253810.9208.454.846.452.844.441.838.825379259.453.34451.34239.836.824.336731.2510.551.941.449.939.437.934.923.635.162.51547.432.445.430.431.928.921.53210019.144.325.242.323.227.824.820.13015524.141.417.439.415.4242118.828.120027.639.812.237.810.221.818.8182725031.138.37.336.3 5.319.816.817.32630034.337.1 2.935.10.918.315.316.825.235037.236.1-1.134.1-3.116.913.916.324.640040.135.3-4.833.3-6.815.812.815.92450045.333.8-11.431.8-13.413.810.815.223Material SpecificationsConductor Material Bare copperDrain Wire Material Tinned copperInsulation Material FEPJacket Material PVCSeparator Material FEPMechanical SpecificationsPulling Tension, maximum11.34 kg | 25 lbEnvironmental Specifications0 °C to +60 °C (+32 °F to +140 °F)Page of34Installation temperature0 °C to +60 °C (+32 °F to +140 °F)Operating Temperature-20 °C to +60 °C (-4 °F to +140 °F)Environmental Space PlenumFlame Test Method CMP/FT6Smoke Test Method CMP/FT6Packaging and WeightsCable weight58.038 kg/km | 39 lb/kftPackaging Type ReelRegulatory Compliance/CertificationsAgency ClassificationDesigned, manufactured and/or distributed under this quality management systemISO 9001:201544Page of。

华为S6320 Series 10GE开关产品概述说明书

S6320 Series 10GE SwitchesHuawei Sx300 Series Switches The S6300 series switches are next-generation 10G box switches. The S6300 can function as an access switch in an Internet data center (IDC) , aggregation switch on a Metropolitan Area Network (MAN), or core/aggregation switch on a campus network.The S6320 has industry-leading performance, provides line-speed 10GE access ports and line-speed 40GE uplink ports. It can be used in a data center to provide 10 Gbit/s access to servers or function as a core switch on a campus network to provide 10 Gbit/s trafﬁc aggregation. In addition, the S6320 provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure data centers.S6320S-26Q-EI-24S is a compact switch with 220mm depth , perfectly suitable in a 300 mm deep cabinet, saving installation space for customers.S6320 Series 10GE Switches Product OverviewProduct Appearance1Product FeaturesLarge-capacity, high-density, 10 Gbit/s access• To provide sufﬁcient bandwidth for users, many servers, particularly those in data centers, use 10Gnetwork adapters. The S6320 can be used in data centers to provide high forwarding performance and10GE ports. The S6320 has the high density of all 10GE ports and the large switching capacity. EachS6320 provides a maximum of 6 line-speed QSFP+ ports and 48 line-speed 10GE ports.• S6320 ports support 1GE and 10GE access and can identify optical module types, maximizing the return on investment and allowing users to ﬂexibly deploy services.• The S6320 has a large buffering capacity and uses an advanced buffer scheduling mechanism to ensure non-block transmission when data center trafﬁc volume is high.Comprehensive security policies• The S6320 provides multiple security measures to defend against Denial of Service (DoS) attacks, as well as attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurfattacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root attacks. Attacks to usersinclude bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spooﬁng attacks, and DHCPrequest ﬂood attacks. DoS attacks that change the CHADDR ﬁeld in DHCP packets are also attacksagainst users.• The S6320 supports DHCP snooping, which generates user binding entries based on users' accessinterfaces, MAC addresses, IP addresses, IP address leases, and VLAN IDs. DHCP snooping discards invalidpackets that do not match any binding entries, such as ARP spooﬁng packets and IP spooﬁng packets.This prevents hackers from using ARP packets to initiate attacks on campus networks. The interfaceconnected to a DHCP server can be conﬁgured as a trusted interface to protect the system against bogusDHCP server attacks.• The S6320 supports strict ARP learning, which prevents ARP spooﬁng attacks that exhaust ARP entries.The S6320 also provides an IP source check to prevent DoS attacks caused by MAC address spooﬁng, IPaddress spooﬁng, and MAC/IP spooﬁng. URPF, provided by the S6320, authenticates packets by checkingthe packet transmission path in reverse, which can protect the network against source address spooﬁngattacks.• The S6320 supports centralized MAC address authentication and 802.1x authentication. The S6320authenticates users based on statically or dynamically bound user information such as the user name,IP address, MAC address, VLAN ID, access interface, and ﬂag indicating whether antivirus software isinstalled. VLANs, QoS policies, and ACLs can be dynamically applied to users.• The S6320 can limit the number of MAC addresses learned on an interface to prevent attackers fromexhausting MAC address entries by using bogus source MAC addresses. This function minimizes thepacket ﬂooding that occurs when users’ MAC addresses cannot be found in the MAC address table.Huawei Sx300 Series Switches2Higher reliability mechanism• The S6320 supports redundant power supplies. You can choose a single power supply or use two power supplies to ensure device reliability. With two fans, the S6320 has a longer MTBF time than its counterpart switches.• The S6320 supports MSTP multi-process that enhances the existing STP, RSTP, and MSTP implementation.This function increases the number of MSTPs supported on a network. It also supports enhancedEthernet reliability technologies such as Smart Link and RRPP, which implement millisecond-levelprotection switchover and ensure network reliability. Smart Link and RRPP both support multi-instance to implement load balancing among links, optimizing bandwidth usage.• The S6320 supports the enhanced trunk (E-Trunk) feature. When a CE is dual-homed to two S6320s (PEs), E-Trunk protects the links between the CE and PEs and implements backup between the PEs. E-trunkenhances link reliability between devices.• The S6320 supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployedon upper-layer aggregation devices to provide fast switchover (within 50 ms), ensuring the non-stoptransmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and ﬂexible topology, facilitating network planning and management.• The S6320 supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a ring automatic protection switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows ﬂexible networking, helping customers build a network with lower OPEX and CAPEX.• The S6320 supports VRRP. Two S6320s can form a VRRP group to ensure nonstop reliable communication. Multiple equal-cost routes to upstream devices can be conﬁgured on the S6320 toprovide route redundancy. When an active route is unreachable, trafﬁc is switched to a backup route. Enhanced QoS control mechanism• The S6320 implements complex trafﬁc classiﬁcation based on packet information, such as the 5-tuple, IP preference, ToS, DSCP, IP protocol type, ICMP type, TCP source port, VLAN ID, Ethernet protocol type, and CoS. ACLs can be applied to inbound or outbound directions on an interface. The S6320 supportsa ﬂow-based two-rate three-color CAR. Each port supports eight priority queues, multiple queuescheduling algorithms, such as WRR, DRR, SP, WRR+SP, and DRR+SP, and WRED, a congestion avoidance algorithm. All of these features ensure high-quality voice, video, and data services.High scalability• The S6320 supports the iStack function, which allows switches that are far apart to form a stack. A port on the S6320 can be conﬁgured as a stack port using a command for ﬂexible stack deployment. The distance between stacked switches is further increased when the switches are connected with optical ﬁbers. A stack is easier to expand, is more reliable, and has a higher performance rate than a singleswitch. New member switches can be added to a stack without interrupting services when the systemHuawei Sx300 Series Switches3capacity needs to be increased or a member switch fails. Compared with the stacking of chassis-shapedswitches, the iStack function can increase system capacity and port density without being restrictedby hardware. Multiple devices in a stack can function as one logical device, which simpliﬁes networkmanagement and conﬁguration.Convenient management• The S6320 supports automatic conﬁguration, plug-and-play, deployment using a USB ﬂash drive, andbatch remote upgrades. These capabilities simplify device management and maintenance and reducemaintenance costs.• The S6320 supports SNMP v1/v2c/v3 and provides ﬂexible methods for managing devices. Users canmanage the S6320 using the CLI, Web NMS and Telnet. The NQA function assists users with networkplanning and upgrades. In addition, the S6320 supports NTP, SSH v2, HWTACACS, RMON, log hosts, andport-based trafﬁc statistics.• The S6320 supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce network administrator workloads and ensure correct VLANconﬁguration. In a complex network topology, GVRP simpliﬁes VLAN conﬁguration and reduces networkcommunication faults caused by incorrect VLAN conﬁguration.• The S6320 supports Multiplex VLAN (MUX VLAN). MUX VLAN isolates Layer 2 trafﬁc between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN,but cannot communicate with each other. MUX VLAN is typically used on an enterprise intranet toisolate user interfaces from each other while still allowing them to communicate with server interfaces.This function prevents communication between network devices connected to certain interfaces orinterface groups, but allows these devices to communicate with the default gateway.• The S6320 supports BFD, which provides millisecond-level fault detection for protocols, such as OSPF, IS-IS, VRRP, and PIM, to improve network reliability. Complying with IEEE 802.3ah and 802.1ag, the S6320supports point-to-point Ethernet fault management and can detect faults in the last mile of an Ethernetlink to users. Ethernet OAM improves Ethernet network management and maintenance capabilities andensures a stable network.Various IPv6 features• The S6320 supports IPv4/IPv6 dual stack and can migrate from an IPv4 network to an IPv6 network.S6320 hardware supports IPv4/IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4tunnels, and ISATAP tunnels), and Layer 3 line-speed forwarding. The S6320 can be deployed on IPv4networks, IPv6 networks, or networks that run both IPv4 and IPv6. This makes networking ﬂexible andenables a network to migrate from IPv4 to IPv6.• The S6320 supports various IPv6 routing protocols, including RIPng and OSPFv3. The S6320 uses the IPv6 Neighbor Discovery Protocol (NDP) to manage packets exchanged between neighbors. It also providesa path MTU (PMTU) discovery mechanism to select a proper MTU on the path from the source to thedestination, optimizing network resource utilization and obtaining the maximum throughput.Huawei Sx300 Series Switches4Huawei Sx300 Series SwitchesProduct Speciﬁcations5Huawei Sx300 Series Switches 6Huawei Sx300 Series Switches ApplicationsData CentersThe S6320 can be used in Huawei's sustainable data center solution, which offers four major advantages: evolution, availability, pooling, and visualization.As shown in the following ﬁgure, the S9300E Terabit routing switches function as core switches in a data center and use ﬁrewall and load balancer boards to ensure security and load balancing. The S6320 functions as an access switch and provides high-density 10GE ports to connect to 10G servers.IPS/IDSFirewall10-gigabit switchS6320Gigabit switch S53208Huawei Sx300 Series SwitchesOrdering InformationS6320-30C-EI-24S-AC bundle(24×10GE SFP+ , 2×40GE QSFP+ ports ,with 1 extended slot, with 600W AC power supply)S6320-54C-EI-48S-AC bundle(48×10GE SFP+ , 2×40GE QSFP+ ports ,with 1 extended slot, with 600W AC power supply)S6320-30C-EI-24S-DC bundle(24×10GE SFP+ , 2×40GE QSFP+ ports ,with 1 extended slot, with 350W DC power supply)S6320-54C-EI-48S-DC bundle(48×10GE SFP+ , 2×40GE QSFP+ ports ,with 1 extended slot, with 350W DC power supply)S6320-54C-EI-48S Bundle(48 10 Gig SFP+,2 40 Gig QSFP+ interface,with 1 interface slot,with 350W DCpower supply)S6320-26Q-EI-24S-AC bundle(24×10GE SFP+ , 2×40GE QSFP+ ports , with 170W AC power supply)S6320-26Q-EI-24S-DC bundle(24×10GE SFP+ , 2×40GE QSFP+ ports , with 170W DC power supply)S6320-26Q-EI-24S(24 10 Gig SFP+,2 40 Gig QSFP+,without power module)4× 40 GE QSFP+ interface card(used in S6320EI series)Fan box(B,FAN panel side exhaust)600W AC power module350W DC power module170W AC power module170W DC power moduleFor more information, visit or contact your local Huawei sales ofﬁce.Application in MANThe S6320 is applicable to MAN convergence. It provides industry-leading high-density 10-gigabit ports to meet the increasing bandwidth demand. Abundant features and perfect security control mechanisms enable the S6320 to be the most cost-effective choice for MAN convergence.9Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.Other trademarks, product, service and company names mentioned are the property of their respective owners.General DisclaimerThe information in this document may contain predictive statements including,without limitation, statements regarding the future financial and operating results,future product portfolio, new technology, etc. There are a number of factors thatcould cause actual results and developments to differ materially from thoseexpressed or implied in the predictive statements. Therefore, such information isprovided for reference purpose only and constitutes neither an offer nor anacceptance. Huawei may change the information at any time without notice.。

IPv6配置操作

目录第1章 IPv6基础配置.............................................................................................................1-11.1 IPv6简介............................................................................................................................1-11.1.1 IPv6协议特点..........................................................................................................1-11.1.2 IPv6地址介绍..........................................................................................................1-31.1.3 IPv6邻居发现协议介绍...........................................................................................1-61.1.4 IPv6 PMTU发现.......................................................................................................1-81.1.5 IPv6 DNS简介.........................................................................................................1-91.1.6 协议规范..................................................................................................................1-91.2 配置IPv6基本功能...........................................................................................................1-101.2.1 使能IPv6功能........................................................................................................1-101.2.2 配置IPv6单播地址.................................................................................................1-101.3 配置IPv6邻居发现协议....................................................................................................1-121.3.1 配置静态邻居表项..................................................................................................1-121.3.2 配置接口上允许动态学习的邻居的最大个数..........................................................1-121.3.3 配置RA消息的相关参数.........................................................................................1-121.3.4 配置重复地址检测时发送邻居请求消息的次数......................................................1-151.4 配置PMTU发现................................................................................................................1-151.4.1 配置指定地址的静态PMTU....................................................................................1-151.4.2 配置PMTU老化时间..............................................................................................1-151.5 配置TCP6.........................................................................................................................1-161.6 配置IPv6 FIB转发功能.....................................................................................................1-171.7 配置指定时间内发送ICMPv6差错报文的最大个数..........................................................1-171.8 配置IPv6 DNS..................................................................................................................1-181.8.1 配置静态IPv6 DNS................................................................................................1-181.8.2 配置动态IPv6 DNS................................................................................................1-181.9 IPv6基础显示和维护........................................................................................................1-191.10 IPv6基础典型配置举例..................................................................................................1-20第2章 IPv6应用配置.............................................................................................................2-12.1 IPv6应用简介.....................................................................................................................2-12.2 Ping IPv6操作....................................................................................................................2-12.3 Traceroute IPv6操作.........................................................................................................2-12.4 TFTP IPv6操作..................................................................................................................2-22.4.1 配置准备..................................................................................................................2-32.4.2 TFTP配置................................................................................................................2-32.5 Telnet IPv6操作.................................................................................................................2-42.5.1 配置准备..................................................................................................................2-42.5.2 建立IPv6 Telnet连接................................................................................................2-42.5.3 IPv6 Telnet显示.......................................................................................................2-42.6 IPv6应用典型配置举例......................................................................................................2-52.6.1 组网需求..................................................................................................................2-52.6.2 组网图......................................................................................................................2-52.6.3 配置步骤..................................................................................................................2-52.7 IPv6应用故障诊断与排除..................................................................................................2-72.7.1 无法Ping通远端的目的地址.....................................................................................2-72.7.2 无法实现Traceroute................................................................................................2-72.7.3 无法实现TFTP.........................................................................................................2-72.7.4 无法实现Telnet........................................................................................................2-8第3章双协议栈配置..............................................................................................................3-13.1 过渡技术简介.....................................................................................................................3-13.2 双协议栈简介.....................................................................................................................3-13.3 配置双协议栈.....................................................................................................................3-23.3.1 配置设备运行时支持IPv4/IPv6双协议栈模式..........................................................3-23.3.2 配置双协议栈...........................................................................................................3-23.4 显示设备运行模式..............................................................................................................3-3第4章隧道技术配置..............................................................................................................4-14.1 隧道技术简介.....................................................................................................................4-14.1.1 IPv6 in iPv4隧道原理..............................................................................................4-14.1.2 配置隧道和自动隧道................................................................................................4-24.1.3 IPv6 in IPv4隧道模式..............................................................................................4-24.1.4 快速终结..................................................................................................................4-34.2 隧道技术配置任务简介.......................................................................................................4-44.3 配置手动隧道.....................................................................................................................4-44.3.1 配置准备..................................................................................................................4-44.3.2 配置手动隧道...........................................................................................................4-54.3.3 配置举例..................................................................................................................4-64.4 配置IPv4兼容IPv6自动隧道..............................................................................................4-84.4.1 配置准备..................................................................................................................4-84.4.2 配置IPv4兼容IPv6自动隧道...................................................................................4-84.4.3 配置举例..................................................................................................................4-94.5 配置6to4隧道..................................................................................................................4-124.5.1 配置准备................................................................................................................4-124.5.2 配置6to4隧道.......................................................................................................4-124.5.3 配置举例................................................................................................................4-134.6 配置ISATAP隧道..............................................................................................................4-164.6.1 配置准备................................................................................................................4-164.6.2 配置ISATAP隧道...................................................................................................4-164.6.3 配置举例................................................................................................................4-18 4.7 隧道技术显示...................................................................................................................4-20 4.8 常见错误配置举例............................................................................................................4-20第1章 IPv6基础配置说明：在以下介绍中出现的路由器及路由器图标，代表了一般意义下的路由器以及运行了路由协议的三层交换机。

中国联通物联网PeOTN(BIT透传)配置指导

以河南为例,每个地市根据业务量预留200~300个VLAN，推荐原则是一个10GE大概汇聚10个GE的业务，如果业务量不大也可以汇聚更多GE业务。
省
地市
VLAN
SITE5 PeOTN源板卡/GE端口
SITE5 PeOTN宿板卡/10GE端口
河南
郑州
100-399
T220E-槽位1/端口1
T220E -槽位2/端口1
VLAN1原则上不使用；
VLAN2-9作为管理使用；
VLAN10-99作为预留；
VLAN100-3499作为各地市接入业务使用，按顺序分配；
VLAN3500-4095暂时预留。
以河南为例,每个地市根据业务量预留200~300个VLAN，推荐原则是一个10GE大概汇聚10个GE的业务，如果业务量不大也可以汇聚更多GE业务。
点击LAG Member Interface List左边的绿色箭头，设置14/6为主端口，14/7为从端口
点击OK，查看配置结果
3
3.1
3.1.1
1．EG10每个GE连接一个地市，汇聚到左边EX4的10GE端口上。
3.1.2
VLAN划分示例，供参考：
VLAN ID的取值范围为：1-4096；VLAN ID的规划及分配原则如下：
2.3.3
1.配置C401和L404之间的ODU4交叉
点击网元——>WDM Service Management——>New，选择Level、SourceSlot和Sink Slot等信息，并点击OK健
2.配置C220和L404之间的ODU2交叉
点击网元——>WDM Service Management——>New，选择Level、SourceSlot和Sink Slot等信息，并点击OK健

onu的查看及注册命令(三种olt)2013.07

华为switch language-mode 当前语言模式已切换到本地语种DG-HJBT-5680T> enDG-HJBT-5680T# config 进入特权模式DG-HJBT-5680T(config)# display ont autofind all 显示自动发现的OnuDG-HJBT-5680T(config)# display board 0/1 显示第一槽下的所有epon口onu格林威尔show pen 查看已接好，但还没注册的onushow onu-list pon 5/3 查看PON口下以注册ONU瑞斯康达Lan ch 当前语言模式已切换到本地语种DG-ST-EE01-I5800E>enDG-ST-EE01-I5800E#shDG-ST-EE01-I5800E#show inDG-ST-EE01-I5800E#show interface onDG-ST-EE01-I5800E#show interface onu inDG-ST-EE01-I5800E#show interface onu information一、I5800的onu（已接好但没有注册的Onu会自动提示）：登录：1、show interface onu information //查看所有onu在线情况。

show interface onu 9/3/3 information //查某个onu的在线情况。

2、查看SN号：Raisecom#show int onu 2/2/1 snRaisecom#show interface onu creation-information//查onu的创建情况。

Raisecom #show interface onu 1/1/1 uni ethernet vlan //查onu的vlanRaisecom #show interface onu 1/1/1 uni ethernet inf //查Onu的端口是否up。

VIAVI 4100-Series DWDM OTDR 模块（用于 T-BERD MTS-2000、

VIAVI Solutions Data SheetVIAVIDWDM OTDR Module (4100-Series)For T-BERD®/MTS-2000, -4000 V2, -5800, CellAdvisor 5Gand OneAdvisor-800 PlatformsAs xWDM technology adoption continues to grow in access networks for broadbandservices, technicians require comprehensive and lightweight xWDM test tools.Consisting of a single module, the VIAVI C-band DWDM OTDR solution enables cable,wireless, and telco operators to perform complete end-to-end link characterizationand troubleshooting of DWDM and hybrid CWDM/DWDM networks.Key Benefitsy Characterize fiber links with exactDWDM wavelengthsy Troubleshoot live networks with in-servicetesting capabilityy Verify end-to-end continuity through MUX/DEMUX and ROADMs using the continuouswave source functiony Automatically identify and test DWDM portchannel/link with patented Wavescany Avoid accidental transceiver damagewith SFP ProtectKey Featuresy C-Band (1528nm to 1568nm) tunableDWDM OTDR module at ITU-T G.694.1wavelengths (CH12 to CH62)y Integrated CW light source withmodulation capabilityy Instantaneous traffic detectiony Automatically identify Mux and Demuxcomponents with SmartLink MapperApplicationsy Metro & access rings, business to business,advanced C-RAN fronthauls & next genFTTH networksy Qualification of fronthaul access networksy Testing new DWDM wavelengthroutes without disrupting traffic onactive channelsy Pinpointing faults and their exactlocations while in serviceThe DWDM OTDR module’s optical performance, combinedwith the complete suite of T-BERD/MTS, CellAdvisor 5G andOneAdvisor-800 platform testing features, ensures thatcomprehensive testing is done right the first time.Standard testing features include:y Auto-setting of the acquisition parametersy Summary results table with pass/fail analysis per theinternational standardsy Comprehensive event diagnosisy FastReport onboard report generationT-BERD/MTS-2000One-slot handheldmodular platform forfiber network testingHandheld testinstrument for 10 GEthernet and fibernetworks testingTwo-slot handheldmodular platformfor fiber/copper andmultiple services testingT-BERD/MTS-4000 V2T-BERD/MTS-5800CellAdvisor 5GCell site test solutionOneAdvisor-800All-in-One Cell-siteInstallation andMaintenanceT est Solution2020 Broadband Technology Review ‒4.5 Diamond Award Winner2 VIAVI T-BERD/MTS 4100 Series DWDM OTDR ModuleSpecifications (typical at 25°C)2. The one-way difference between the extrapolated backscattering level at the start of the fiber and the RMS noise level, after 3 minutes averaging and using the largest pulsewidth.3. Measured at ±1.5 dB down from the peak of an unsaturated reflective event using the shortest pulsewidth.4. Measured at ±0.5 dB from the linear regression using a FC/PC reflectance and using the shortest pulsewidth.5. Subtract 3 dB when used in modulation mode (270/330/1/2 kHz).For more information on the VIAVI T-BERD/MTS-2000/-4000 V2/-5800, CellAdvisor 5G and OneAdvisor-800 test platforms, refer to their respective datasheets.Ordering Information4100 DWDM OTDR Modules Tunable DWDM OTDR Module - PCE41DWDMC-PC Tunable DWDM OTDR Module - APCE41DWDMC-APC Wavescan® SW option for DWDM OTDR Module EWAVESCAN SFP Protect SW option for DWDM OTDR Module ESFPPROTECT Optical Adapters Switchable AdaptersEUSCADS,EUSCADS-APC,EUFCADS,EULCADS, EULCADS-APC。

Hillstone SG-6000 系列安全网关 StoneOS 版本说明说明书

版本说明本文件为SG-6000系列安全网关系统固件StoneOS的版本说明，描述版本信息、软件功能以及版本中的已知问题等。

StoneOS 5.0R3P6本节为StoneOS 5.0R3P6版本说明。

产品和版本信息产品名称：Hillstone SG-6000系列安全网关产品型号和系统文件：发布日期：2014年06月06日文档说明Hillstone SG-6000系列安全网关配有以下手册：✹《Hillstone山石网科多核安全网关使用手册》✹《Hillstone山石网科多核安全网关命令手册》✹《Hillstone SG-6000多核安全网关安装手册》✹《Hillstone山石网科多核安全网关扩展模块手册》✹《Hillstone山石网科多核安全网关日志信息参考手册》✹《Hillstone山石网科SNMP私有MIB信息参考手册》版本升级说明从低版本升级到StoneOS 5.0R3P6时，有以下几个问题需要注意：✹系统文件升级说明✹地址簿功能相关配置升级说明✹策略规则相关配置升级说明✹统计集功能相关配置升级说明✹接口镜像功能相关配置升级说明✹攻击防护功能相关配置升级说明系统文件升级说明因较早版本曾对系统文件的大小进行了限制，所以当从4.0R6P15.1（包括4.0R6P15.1）之前的版本升级到5.0R3P6时，用户需要通过sysloader才能升级成功。

可以直接升级5.0R3P6的系统版本包括5.0R2P2之后的5.0R版本、4.5R3P8以及4.5R4P1，更低版本建议先升级到上述版本，然后再升级到5.0R3P6。

地址簿功能相关配置升级说明StoneOS 5.0R3P6为地址条目增加了ID属性。

当把系统从低版本升级到5.0R3P6时，系统会对已有地址簿配置做平滑处理，不影响用户使用。

当把系统从5.0R3P6降级时，已有地址簿配置会丢失。

策略规则相关配置升级说明StoneOS 5.0R3P6将策略规则的默认模式转变为全局配置模式。

DS-3E0106HP 100Mbps 远程PoE交换机用户手册说明书

2345Device ConnectionConnect your devices according to your actual networking requirements.InterfacesRear PanelFront PanelPacking List1Switch x 1Quick StartGuide x 1Power Cord x 1Hi-PoE PortHi-PoE port is used for other Hi-PoE PTZ cameras connection, and the max. power is 60 W .1/2 PortsHigh priority ports, can guarantee prior and stable transmission .PoE Ports100 Mbps PoE ports are used for other PoE devices connection .RJ45 Ports100 Mbps RJ45 ports are used for device connection via network cables .LINK/ACT Indicator PoE Indicator PoE-MAX Indicator PWRIndicatorPoE Ports RJ45 PortsGrounding TerminalPower SupplyLINK/ACTIndicator Power Adapter x 1Applicable ModelsThis manual is applicable to DS-3E0106HP series 100 Mbps Long-Range PoE switch.Symbol ConventionsThe symbols that may be found in this document are deﬁned as follows.During the installation and utilization of the device, please strictly conform to electrical safety rules in diﬀerent nations and regions.Use the attached power adaptor only and not to change the adaptor randomly. Please refer to speciﬁcation table for speciﬁc requirements of power adaptor.Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)The device must be installed in machine room only, and only maintenance staﬀ or qualiﬁed person should access to the device.Do not touch the upper cover area of the device that may be overheated.Power must be shut down during cable connection, device installation and dismantlement.You shall acknowledge that the use of the device with Internet access might be under network security risks, please strengthen protection for your personal information and data security. If you ﬁnd the device might be under network security risks, please contact with us.Proper conﬁguration of all passports and other security settings is the responsibility of the installer, and you shall keep user name and passports properly.Please keep all original packing materials properly. If the product does not work properly, pack the switch in its original packing materials for shipping. We shall not assume any responsibility for damages caused by improper packing materials during shipping.Ensure that your devices powered via the PoE port have their shells protected and ﬁre-proofed, because the switches are not compliant with the Limited Power Source (LPS) standard.This is a class A product and may cause radio interference in which case the user may be required to take adequate measures.Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.SymbolDescriptionProvides additional information to emphasize or supplement important points of the main text.Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.•••••••••••DIP SwitchON : Extend mode, ports 1-4 support network transmission of up to 300 m, and the speed rate of the port is 10 Mbps.OFF : Standard mode, the network transmission of PoE ports is up to 100 m, and the speed rate of the port is 100 Mbps.Grounding TerminalThe grounding terminal is used to connect to the ground cable to protect the switch from lightning.Power SupplyUse the attached power cord to connect the switch to socket.If any accessories are damaged or lost, keep the package intact and contact your dealer for replacement.DIP Switch4-Port 10/100M PoE10/100M Unmanaged PoE Pro-SeriesDS-3E0106HP4-Port 100 Mbps Long-Range PoE SwitchQuick Start GuideUD13637B-A678Power-On CheckingSee the following table and check whether your devices are correctly connected. After proper connection, you can use your switch without doing any settings.The switch supports auto MDI/MDIX of ports, you can usestraight-through cable or crossover cable to connect the switch and opposite Ethernet devices.Regulatory InformationFCC InformationPlease take attention that changes or modiﬁcation not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.FCC ConditionsThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.EU Conformity StatementThis product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU,the RoHS Directive 2011/65/EU.2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For properrecycling,returnthis product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.For more information see: 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for speciﬁc battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: Industry Canada ICES-003 ComplianceThis device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.Quick Start GuideCOPYRIGHT ©2019 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.About this ManualThe Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to ﬁrmware updates or other reasons. Please ﬁnd the latest version in the company website (/en/).Please use this user manual under the guidance of professionals.Trademarks Acknowledgementand other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.Legal DisclaimerTO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKEANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.。

华为ONU配置案例

本地CONSOLE登陆密码：root admin案例参数：PON板端口0/1/0 带宽84m（）外层vlan 1012（上行）内层vlan 2001 （下行）ONU Sn：4712345vlan 1012 smart创建OLT的VLANvlan attrib 1012 q-in-qport vlan 1012 0/11 0port vlan 1002 0/12 0上行VLAN号配置，若已有ONU则不需再加interface gpon 0/1port 0 ont-auto-find enableport 1 ont-auto-find enableport 2 ont-auto-find enableport 3 ont-auto-find enablequitinterface gpon 0/18port 0 ont-auto-find enableport 1 ont-auto-find enableport 2 ont-auto-find enableport 3 ont-auto-find enable配置DBA 模板MA5680T(config)#dba-profile add profile-id 10 type1 fix 86016 带宽换算出来的数值创建设置线路模版不同带宽的线路要建多个线路模板MA5680T(config)#ont-lineprofile gpon profile-id X（与上一行的ID 10 有无关系？）MA5680T(config-gpon-lineprofile-1)#tcont 1 dba-profile-id 10MA5680T(config-gpon-lineprofile-1)#gem add 0 eth tcont 1MA5680T(config-gpon-lineprofile-1)#gem mapping 0 0（参数，不会变）vlan 2001MA5680T(config-gpon-lineprofile-1)#commit 提交配置，使生效，必需的MA5680T(config-gpon-lineprofile-1)#quit 退出模板，必需的相同带宽且内VLAN时，可用同个GEM；若不同内VLAN且带宽相同，则要新建GME2, 创建设置业务模版：带宽不同一定要新建线路模板，可沿用TCON1,因在不同的DBA业务模板只与内VLAN有关系，独立的MA5680T(config)#ont-srvprofile gpon profile-id 1（与DBA无关）MA5680T(config-gpon-srvprofile-1)#ont-port eth 4 pots 2 说明下连的ONU接口情况MA5680T(config-gpon-srvprofile-1)#transparent enable （上面说明ONU端口编号以1开始）MA5680T(config-gpon-srvprofile-1)#port vlan eth 1 2001 ONU的下连端口和VLAN号MA5680T(config-gpon-srvprofile-1)#commitMA5680T(config-gpon-srvprofile-1)#quit另解：1个OLT只需要做2个业务模板就行了，因为目前只用了2个内VLAN号；在GPON板上注册ONT终端：MA5680T(config)#display ont autofind all（注册和未注册状态分别怎样？）MA5680T(config)#interface gpon 0/1（最大ONU数为128）MA5680T(config-if-gpon-0/1)#ont confirm 0（端口号）ontid 0（序号）sn-auth 4712345 omci ont-lineprofile-id X ont-srvprofile-id 1（这2个0，指的是索引还是参数？）MA5680T(config-if-gpon-0/1)#MA5680T(config-if-gpon-0/1)#ont port native-vlan 00 eth 1 vlan 2001（与上一行对应）display board 0/1 查看已注册到的ONU情况配置OLT上的业务流：MA5680T(config)#service-port vlan 1012gpon 0/1/0 ont 0gemport 0（GEM的业务流ID）multi-service user-vlan 2001 rx-cttr 6 tx-cttr 6若更换为同型号的ONU只需执行下面的语句：MA5680T(config-if-gpon-0/1)#ont modify 0 0 sn 1323456789（2个0与前面对应，端口号和序号）。

GPON关键技术之ONT

组播特性：255个组播组，IGMP SNOOPING V2/V3，支持快速离开，
每用户可加入8个组播组
TDM特性：TDM over GEM方式，Delay<1.5ms 以太网特性：1024个MAC地址
QoS特性：基于GEMPORT和CoS的SLA定义，Policing机制，业务流标记
300～400
BM
Li离子电池
20x20x6
约1.3
0℃~45℃
1000～1100
DM
镍氢电池
20x20x8
约2.5
0℃~45℃
900～1000
Page 16
不同电池特点和规格
电池特点电池容量（Ah） 7.2 电池电压范围（V） 10~13.8 电池重量（Kg）约2.5 电池成本（RMB） 100 电池寿命
GPON子系统
设备制造子系统：对关键器件的检测（对芯片进行环回和诊断测试）

配置管理子系统：通过WEB、OMCI和SSH等多种方式登录管理设备。其它（系统模块，都通过该模块进行命令操作）
系统管理子系统：对安全、日志、告警、诊断、异常处理等系统的管理功能 E1子系统：接入无线基站、PBX和节点机，E1性能指标达到窄带接入要求。
无线基站、节点机等设备
INIT接口：持续按住INIT口中的按钮10s 使恢复出场设置。
Page 9
OT 925G 软件架构
设备制造子系统
配置管理子系统系统管理子系统
E1子系统
协议栈子系统 LAN Switch 子系统

协议栈子系统：支持各种网络层协议 GPON子系统：对G.984协议系列功能要求的支持
1终端零配置zerotouch2业务自动发放即插即用3远程管理omci4远程升级灵活的gpon终端管理方案ma5680t系统终端零配置page29nms2000accessnetwork2下发数据配置3启动终端利用序列号进行注册ontontontont用户给用户发放终端12自动完成olt的数据配置的的stb3利用omci完成ont的数据配置serviceprovisioningcrmbilling1开户ordermanagement维护人员用激活码生成器生成终端激活码包含iadmsippppoe用户名密码等用户在终端上输入激活码终端上电通过tr069都到iadms上注册iadms对该终端做自动配置

10G万兆布线方案

技术方案神州数码信息系统有限公司2009-4-19目录1.概述 (3)2.需求分析 (3)3.设计依据 (3)4.10G以太网介绍 (4)4.110G光纤网络 (4)4.210G铜缆网络 (5)5.产品选型 (6)6.方案设计 (7)6.1工作区子系统 (7)6.2水平干线子系统 (7)6.3配线间子系统 (8)6.4接地子系统 (9)7.系统测试及验收 (10)7.16A铜缆测试 (10)7.2OM3 光缆测试 (15)8.总结 (16)1.概述2009年初我公司承接NOKIA工厂网络升级项目，该项目是NOKIA全球工厂网络升级计划的一部分，它将诺基亚全球手机工厂从原先的超五类铜缆系统直接升级为Cat 6A系统，使其生产线系统能够满足现有网络平台升级以及未来5到10年对布线系统的要求。

在整个厂区综合布线解决系统施工服务供应商的竞标中，我公司凭借清晰全面的施工方案、完备的布线产品线和高效的施工团队在竞标者中脱颖而出，成为诺基亚北京工厂升级项目的布线承建商。

目前国内应用万兆铜缆系统的案例并不多，10G布线系统统将成为未来布线系统发展的趋势，在此将Cat 6A类铜缆和OM3光缆工厂布线方案做阐述，希望能起到共同促进的作用。

2.需求分析原工厂生产线使用Cat5e布线系统，由于各种原因该系统已经无法满足生产线对高速数据链路通讯的要求，因此设计在整个生产线水平布线子系统中布设新的6A铜缆直各工作站，在垂直子系统布设OM3连接厂区配线间和中心机房。

具体建设需求如下：厂区面积约7000平米，厂房高度约8米，布线点位近2000个；在厂区铺设新的6A铜缆，并安装配线架、两端跳线等相关设备；在厂区内新建若干配线间，优化铜缆相关路由，并做好辅助项目建设如配电、空调、接地系统等；从新建配线间铺设OM3光缆至核心就机房，所有光纤连接件为LC，并做好相关标签工作；在整个布线施工过程中不能影响手机生产线路正常工作。

3.设计依据ANSI/TIA/EIA-568-B 商用建筑电信电缆标准ANSI/TIA/EIA 568-B.2-1 商用建筑电信电缆敷设标准.第2部分:对称绞线对元件.补充1.四线对100 OHM 6类电缆敷设传输性能规范ANSI/TIA/EIA-568B.2-1 ad10 4对100米增强6类布线系统传输性能规范ISO/IEC11801 2002 am1.1 Class EA 支持IEEE 802.3标准100米范围的的10GBase - T的电缆及组件的标准和测试规范ANSI/TIA/EIA-TSB-155TIA/TSB-140 光缆系统现场测试长度、损耗和极性的附加原则ISO/IEC 14763-3 信息技术.用户住宅布线的实施和操作.第3部分:光纤布线测试ANSI/TIA/EIA-569-B 商用建筑电信电缆敷设标准.ANSI/TIA/EIA-606-B 商用建筑的电信基础设施的管理标准ANSI/TIA J-STD 607 A 民用建筑远距通信接地和搭接要求4.10G以太网介绍4.110G光纤网络在2002年6月IEEE 802.3ae工作队制定和发布了万兆光纤以太网工业环境的布线标准，目前10G以太网标准依然是以太网标准802.3-2005的一个部分。

10gpon 波长 -回复

10gpon 波长-回复什么是10GPON波长？10GPON波长是指在10Gbps（千兆位每秒）的速率下传输数据的光纤通信技术。

它使用了不同的波长来传输数据信号，以提供更快的速度和更高的带宽。

10GPON波长的工作原理是基于波分复用技术（Wavelength Division Multiplexing，WDM）。

WDM技术允许通过单根光纤传输多个不同波长的光信号，每个波长都可以承载不同的数据通道。

这意味着10GPON可以同时传输多个数据流，从而增加了整个网络的传输容量。

在10GPON中，典型的波长范围是1260nm至1625nm之间，其中一个波长被用于下行通信（OLT到ONU方向），另一个波长被用于上行通信（ONU到OLT方向）。

这种双向通信方式使得10GPON能够提供对称的上行和下行速度，从而满足了用户对快速互联网连接的需求。

虽然10GPON使用了不同的波长来传输数据，但它仍然采用了传统的光纤接口，如SC或LC光纤接口。

这使得10GPON可以与现有的光纤网络兼容，而无需进行大规模的设备或基础设施升级。

在10GPON系统中，一个OLT（Optical Line Termination）设备负责光纤网络的管理和控制。

OLT通过下行波长将数据发送到ONU（Optical Network Unit），而ONU则通过上行波长将数据发送回OLT。

每个ONU 都与OLT相连，并为终端用户提供光纤接入服务。

10GPON的波长分配和管理是由网络运营商或服务提供商负责的。

他们负责确定各个波长的分配方式，以确保整个网络的高效运行和资源利用。

总结起来，10GPON波长是一种光纤通信技术，利用不同的波长传输数据信号，以提供千兆位每秒的传输速度和更高的带宽。

它通过波分复用技术实现多路复用，使用双向通信方式满足用户的上行和下行需求，并与现有的光纤网络兼容。

网络运营商负责管理10GPON系统中的波长分配和资源管理。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—16
TCP Traffic Before and After RED
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—17
Weighted Random Early Detection
• Additional incoming packets are dropped. • Dropped packets may cause significant application performance degradation. • Tail drop has significant drawbacks.
• Class-based WRED is available when configured in combination with CBWFQ. • Using CBWFQ with WRED allows the implementation of DiffServ assured forwarding PHB. • Class-based configuration of WRED is identical to standalone WRED.
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—21
WRED Profiles
© 2006 Cisco Systems, Inc. All rights reserved.
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—14
RED Profiles
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—15
RED Modes
• RED has three modes: – No drop: When the average queue size is between 0 and the minimum threshold – Random drop: When the average queue size is between the minimum and the maximum threshold – Full drop (tail drop): When the average queue size is above the maximum threshold • Random drop should prevent congestion (prevent tail drops).
– TCP sessions slow to the approximate rate of output-link bandwidth.
– Average queue size is small (much less than the maximum queue size).
– TCP sessions are desynchronized by random drops.
© 2006 Cisco Systems, Inc. All rights reserved. ONT v1.0—10
TCP Delay, Jitter, and Starvation
• Constant high buffer usage (long queue) causes delay.
• Variable buffer usage causes jitter. • More aggressive flows can cause other flows to starve. • No differentiated dropping occurs.
© 2006 Cisco Systems, Inc. All rights reserved. ONT v1.0—12
Random Early Detection
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—13
Random Early Detection
Tail drop should be avoided because it contains significant flaws:
• TCP synchronization • TCP starvation • No differentiated drop
© 2006 Cisco Systems, Inc. All rights reserved.
© 2006 Cisco Systems, Inc. All rights reserved. ONT v1.0—5
Tail Drop Limitations
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—6
Tail Drop Limitations
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—2
Managing Interface Congestion with Tail Drop
Router interfaces experience congestion when the output queue is full:
TCP Delay, Jitter, and Starvation
• Constant high buffer usage (long queue) causes delay.
• Variable buffer usage causes jitter. • More aggressive flows can cause other flows to starve. • No differentiated dropping occurs.
– IP precedence (8 profiles)
– DSCP (64 profiles) • WRED drops less important packets more aggressively than more important packetsterface, VC, or class level.
• Additional incoming packets are dropped. • Dropped packets may cause significant application performance degradation. • Tail drop has significant drawbacks.
ONT v1.0—7
TCP Synchronization
• Multiple TCP sessions start at different times. • TCP window sizes are increased.
• Tail drops cause many packets of many sessions to be dropped at the same time.
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—19
WRED Building Blocks
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—20
Class-Based WRED
• Tail drop can be avoided if congestion is prevented. • RED is a mechanism that randomly drops packets before a queue is full. • RED increases drop rate as the average queue size increases. • RED result:
© 2006 Cisco Systems, Inc. All rights reserved. ONT v1.0—11
TCP Delay, Jitter, and Starvation
• Constant high buffer usage (long queue) causes delay.
• Variable buffer usage causes jitter. • More aggressive flows can cause other flows to starve. • No differentiated dropping occurs.
• Additional incoming packets are dropped. • Dropped packets may cause significant application performance degradation. • Tail drop has significant drawbacks.
Implement the DiffServ QoS Model
Introducing Congestion Avoidance
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—1
Managing Interface Congestion with Tail Drop
© 2006 Cisco Systems, Inc. All rights reserved.
ONT v1.0—18
Weighted Random Early Detection
• WRED can use multiple different RED profiles. • Each profile is identified by: – Minimum threshold – Maximum threshold – Mark probability denominator • WRED profile selection is based on: