VW10540-1_Ge_062006
5416_VW品牌原装附件产品清单-110726-对外xls
版本：20110726新上市产品正式退市大类类别序号配件零件号配件零件名称SANTANA B2SANTANA 3000SANTANA vista 志俊CROSS POLO POLO劲情POLO劲取NEW POLOLAVIDA朗逸LAVIDA朗逸2011版PASSATPASSAT 领驭内部饰件座椅套1ZVS843003 BEI 皮座椅蕾丝套√内部饰件坐垫2Z00843009高级仿毛系列 车用冬季坐垫（简约款）√√√√√√√√√√√内部饰件坐垫3Z00843010高级仿毛系列 车用冬季坐垫（舒适款）√√√√√√√√√√√内部饰件坐垫4Z00843013纯羊毛系列 车用冬季坐垫（尊贵款）√√√√√√√√√√√内部饰件坐垫5Z00842001 BEI 织草细网格坐垫（典雅款）√√√√√√√√√√√内部饰件坐垫6Z00842002 BEI 织草大网格坐垫（清新款）√√√√√√√√√√√内部饰件坐垫7Z00843104冰丝系列 车用夏季坐垫（清凉款）√√√√√√√√√√√内部饰件坐垫8Z00843105冰丝系列 车用夏季坐垫（清新款）√√√√√√√√√√√内部饰件坐垫9Z00843106亚麻坐垫√√√√√√√√√√√内部饰件脚垫10ZVE842003 BEI 织物脚垫（Touran）内部饰件脚垫11ZVL842003 BEI 织物脚垫（SANTANA 3000）√√内部饰件脚垫12ZVN842003 BEI 织物脚垫（SANTANA）√内部饰件脚垫13ZVY842003 BEI 织物脚垫（POLO）√√内部饰件脚垫14ZVX842003 BEI 织物脚垫（PASSAT）√内部饰件脚垫15ZVC842003 BEI 织物脚垫（PASSAT领驭）√内部饰件脚垫16ZVY842003 SCH 织物脚垫（CROSSPOLO）√内部饰件脚垫17ZVS842003 BEI 织物脚垫（LAVIDA）√内部饰件脚垫18ZVY842004 SCH 织物脚垫（New Polo）√内部饰件脚垫19ZVF842003 SCH 织物脚垫（NEW PASSAT）内部饰件脚垫20ZVS842003 SCH 织物脚垫（LAVIDA朗逸2011版）√内部饰件脚垫21ZVE842003 SCH 织物脚垫（New Touran ）内部饰件脚垫2233D862435A Q70橡胶脚垫左前浅米色（SANTANA vista）√内部饰件脚垫2333D862436A Q70橡胶脚垫右前浅米色（SANTANA vista）√内部饰件脚垫2433D862451A Q70橡胶脚垫左后浅米色（SANTANA vista）√内部饰件脚垫2533D862452A Q70橡胶脚垫右后浅米色（SANTANA vista）√内部饰件脚垫2633D862435A U71橡胶脚垫左前法兰绒灰色（SANTANA vista）√内部饰件脚垫2733D862436A U71橡胶脚垫右前法兰绒灰色（SANTANA vista）√内部饰件脚垫2833D862451A U71橡胶脚垫左后法兰绒灰色（SANTANA vista）√内部饰件脚垫2933D862452A U71橡胶脚垫右后法兰绒灰色（SANTANA vista）√内部饰件脚垫30ZVC842101 BEI 立体脚垫（PASSAT新领驭）√内部饰件脚垫31ZVR842101 SCH 立体脚垫（TIGUAN）内部饰件脚垫32ZVY842102 SCH 立体脚垫（New Polo）√内部饰件脚垫33ZVF842101 SCH 立体脚垫（NEW PASSAT）内部饰件脚垫34ZVS842101 SCH 立体脚垫（LAVIDA朗逸2011版）√内部饰件脚垫35ZVE842101 BEI 立体脚垫（New Touran）内部饰件真皮运动套餐36ZVY858110 ROT真皮运动套餐（红黑）√适用车型上海大众汽车VW品牌原装附件产品清单。
VW10550_EN_2008-04-01
Group StandardVW 10550Issue 2008-04Class. No.: 01154Descriptors: vehicle parts, country of origin, marking, marking of partsCheck standard for current issue prior to usage. The English translation is believed to be accurate. In case of discrepancies the German version shall govern. Numerical notation acc. to ISO practice.Page 1 of 4This electronically generated standard is authentic and valid without signature.Technical ResponsibilityStandardsEKTC/4 Kühn EKTC/4 Hans-Jürgen KühnTel.: +49-5361-9-23370 EKTCManfred TerlindenConfidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior permission of a Standards department within the Volkswagen Group.Contract partners shall obtain the standard only through the B2B supplier platform .© VOLKSWAGEN AG vwnorm-2007-07Country-of-Origin Marking Vehicle PartsPrevious issuesVW 10550: 1975-04, 1994-11, 2000-12, 2006-11ChangesThe following changes have been made as compared to Volkswagen standard VW 10550: 2006-11 (changes in requirements as compared to the previous issue are indicated by a vertical bar on the side of the modified text block):− Section 1, paragraph 1 supplemented (note on external and iternal production and on supplierresponsibility added), Section 2 removed − Section 3: Note on other processes and on marking of packing addedRequirement concerning the use of the "Made in..." prefix changed, 2-letter code removed − Table 1: 2-letter code removedContentsPage1 Scope................................................................................................................................2 2 Definition of country of origin.............................................................................................2 3 Requirements....................................................................................................................2 4 Drawing specification.........................................................................................................3 5 Referenced standards. (4)Page 2VW 10550: Issue 2008-041 ScopeAutomotive products of the Volkswagen AG and its associated companies, manufactured internally and internally, which reach the final consumer as individual parts, units, original parts or accesso-ries are required by existing laws to be identified with the name of the country of origin, to the extent that this is technically feasible and economically justifiable (see Table 1).The supplier is answerable to Volkswagen AG for the correct indication of the country of origin andthe correct marking according to this standard.2 Definition of country of originThe country of origin is that country in which the last essential processing of the vehicle is per-formed.3 RequirementsThe name of the country of origin must be applied to vehicle parts such that it is clearly visible andeasily legible on a permanent basis. The country-of-origin marking shall be applied to the part by incorporation in the manufacturing tool if this is technically feasible.If this is not possible for technical reasons, permanent marking on the part shall be ensured by o-ther suitable processes, such as engraving, stamping, etching, printing or by applying adhesive labels.For parts which cannot be marked for reasons of geometry, function or apperance, the supply packing shall be marked.In the case of relocations of manufacturing tools from the originally designated country of origin to other manufacturing countries, the country codes shall be adjusted accordingly.The complete English country name, e. g. …Germany“, …Mexico“, …Belgium“, …Spain“ according toISO 3166-1 shall be applied, accompanied by the prefix … Made in….“.The prefix …Made in…“ can be omitted if the available space is not sufficient. The font height of the country name shall be approximately half the logo height. However, it shall not directly precede or follow the manufacturer's code. Should the location be at the manufacturer's option, it is recom-mended that the country-of-origin marking be located below the brand trademark.The necessity of the country-of-origin marking must be specified on the drawing, see drawing spe-cification in Section 4, Figure 1.For further requirements concerning the marking of automotive products see VW 10500.Page 3VW 10550: Issue 2008-044 Drawing specificationKennzeichnungVW 10500MarkingMarkenzeichenVW 10514 – C10LogoHerstelllandVW 10550 – 5Country of originHersteller-CodeVW 10540 – 1– 5Mfr. CodeTeil-Nr.; SchriftDIN 1451-4 – 5Pt.-No; LetteringDatumskennzeichnungVW 10560 – A5Date markingWerkstoff-KennzeichnungVDA 260 > PP + EPDM <Material markingFigure 1 – Example of a drawing specification using text macro NO-E2 acc. to VW 01014Table 1 - Country names(extract from ISO 3166-1)German EnglishArgentinien ArgentinaAustralien AustraliaBelgien BelgiumBosnien und Herzegowina Bosnia and HerzegovinaBrasilien BrazilBulgarien BulgariaChile ChileChina ChinaDänemark DenmarkDeutschland GermanyFidschi FijiFinnland FinlandFrankreich FranceGriechenland GreeceGroßbritannien (siehe Vereinigtes Königreich)-Indien IndiaIndonesien IndonesiaIran IranIrland IrelandIsrael IsraelItalien ItalyJapan JapanSerbien und Montenegro Serbia and MontenegroKanada CanadaKorea Korea, Republic ofPage 4VW 10550: Issue 2008-04Kroatien CroatiaLiechtenstein LiechtensteinLuxemburg LuxembourgMalaysia MalaysiaMalta MaltaMexiko MexicoMonaco MonacoNiederlande NetherlandsNigeria NigeriaNorwegen NorwayÖsterreich AustriaPeru PeruPolen PolandPortugal PortugalRumänien RomaniaRussische Föderation Russian FederationSingapur SingaporeSchweden SwedenSchweiz SwitzerlandSlowakei SlovakiaSlowenien SloveniaSpanien SpainSüdafrika South AfricaTaiwan TaiwanTschechische Republik Czech RepublicTunesien TunisiaTürkei TurkeyUngarn HungaryUkraine UkraineVereinigte Staaten United StatesVereinigtes Königreich United Kingdom5 Referenced standardsThe following documents cited in this standard are necessary for application. In this Section, terminological inconsistencies may occur as the original titles are used.VW 01014 Technical Drawings; Drawing Frames and Text MacrosVW 10500 Company Designation, Marking of PartsISO 3166-1 Codes for the Representation of Names of Countries and their Subdivisions - Part 1: Country Codes。
大众汽车标准_VW_10540-3
72
GA7～GZ9
72
HA7～HZ9
72
504
MW5～MW9 23 MX4～MZ9
汽车零件
制造厂代码 用于国外工厂及其承制厂
VW 105 40-3
共 3 页第3页
国外工厂 自已生产 供应商
X SKODA(斯柯达) 汽车股分公司
X 美国大众
Y
自己生产 供应商
Z 墨西哥VW(大众) 自己生产 供应商
代码 XX1
自己生产 供应商
卡门荷大众
自己生产
供应商 4
长春FAW(奥迪)
长春FAW(大众)
5 上海大众(SVW) 自己生产 供应商
布鲁克西尔大众 自己生产
供应商
6 台湾
自己生产
供应商
空位
代码 2BR
3ME
2VZ
5FA 5FV 5SV
6BE
6CC
范围1) 1AA ~ 2ZZ2) 3AA ~ 3ZZ 4AA ~ 4DZ 4JA ~ 4ZZ
2) 剔除2ZV
3) 剔除VA8和VA9
4) 剔除ZA2和ZB2
5) 剔除ZAB，ZAE，ZAL，ZAO，ZBR，ZDO，ZFO，ZFP，
ZFS，ZGU，ZJJ，ZPC，ZST，ZWW，ZWN，ZZW
国外工厂
空位
秘鲁 8
空位
自己生产 供应商
尼日利亚大众
自己生产 供应商
阿根延大众 9
自己生产 供应商
空位
抄写 李莉
日期 01.09.07
汽车零件
制造厂代码 用于国外工厂及其承制厂
VW 105 40-3
共 3 页第2页
南非大众
自己生产 6ZA
大众VW电脑编号大全
Bora A4 各电控系统控制单元编码及零件号发动机控制单元（地址-01，功能07-编码见下）车型控制单元零件号编码----------------------------------------------------------------1.6L 手动箱 06A 906 032 EQ 00031发动机 06A 906 032 JB 00033-----------------------------------------------------------------1.8L 手动箱 06A 906 032 LE 04500发动机自动箱 06A 906 032 LF 04530-----------------------------------------------------------------1.8T 手动箱 06A 906 032 EN 04500发动机自动箱 06A 906 032 LD 04530-----------------------------------------------------------------自动变速箱控制单元（地址-02，功能07-编码00000）ABS控制单元（地址-03，功能07-编码01025/21505/13313）控制单元类型控制单元零件号编码--------------------------------------------------------------------------------1.6L/1.8L/1.8T 1C0 907 379J 01025ABS 1C0 907 379L--------------------------------------------------------------------- ASR/EDS(1.6L/1.8L) 1C0 907 379K 13313---------------- -------------ASR/EDS(1.8T) 21505--------------------------------------------------------------------------------空调控制单元（地址-08，功能07-编码01000/01100）安全气囊控制单元（地址-15，编码12622/12874/12875）控制单元零件号编码--------------------------------------------------------------------------------1C0 909 601 128741C0 909 601 2K 12875--------------------------------------------------------------------------------组合仪表（地址-17，编码05122/05123/01102/05102）车型控制单元零件号编码--------------------------------------------------------------------------------1.6L 手动无多功能显示 1J5 920 806 C 01102自动无多功能显示 1J5 920 806 B 01102--------------------------------------------------------------------------------1.8L 手动无多功能显示 1J5 920 806 B1;1J5 920 826 A11J5 920 806 01102自动有多功能显示 1J5 920 806 C1;1J5 920 826 A11JD 920 826 05102--------------------------------------------------------------------------------1.8T 手动有多功能显示 1J5 920 826 A ; 1JD 920 826 05122自动有多功能显示 1J5 920 826 A1; 1JD 920 826 05122--------------------------------------------------------------------------------Gate-way系统（地址-19，编码00006或00007）舒适系统（地址-46，编码04096/04097/00256/257/258/259 ）--------------------------------------------------------------------------------对于舒适系统，目前在BORA A4所有车型上编码均相同，即在1.6L\1.8L\1.8T车上，舒适系统的编码均为00259(00256\00257\00258)--------------------------------------------------------------------------------[U]收音机[/U]（地址-56，00001/00003/00401/00403[/B] 控制单元类型（有/无CD) 控制单元零件号编码-------------------------------------------------------------------------------- 无（GAMMA) 3BD 035 186 00401收音机有（GAMMA) 3BD 035 186 00403无 (BATTA) 3BD 035 152 00001有 (BATTA) 3BD 035 152 00003----------------------------------------------------------------------------------------------------------------------------------------------------------------A6.2.8 波箱控制单元编码！4B0927156G AG5 01V 2.8L5V USA 8509编码号是00001原装奥迪A6电脑型号美规原装奥迪A6.2.8L 手动自动两用波箱电脑型号发动机电脑:4D0907551AH 2.8L V6/5V MOTRAT D02CODING:06252波箱电脑 :4B09271156G AG501V 2.8L5V USA 8509CODING:00001ABS电脑 :8E0614111M ABS/EDS5.3 OUATTRO D31CODING:06169仪表电脑 :4B0919930RX C5-KOMBIINSTR VDO D15CODING:07262空调电脑 :4B0820043G A6-KLIMAVOLL AUTOMAT:D61CODING:00160中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30CODING:15885菠萝转向助力电脑编号6Q0 423 156 Q LenkhilfeTRW V250Coding: 10140 Code: WSC 12345polo 波罗1.4L MT 全车电脑版本号01-ENGINE //01-10-d 188 (含EPC 电子油门控制)036 906 034 DM MARELLI 4MV 4837Coding: 00071 WSC 12345VIN: LSVFA49J732012842 IMMO ID:VWZ7Z0C683158503 - ABS 6Q0 907 379 L ABS FRONT MK60 0101Coding: 0001097 WSC 1234508 - 空调6Q0 820 045 Klimaanlage X0840该空调是没有CODING 和WSC 的我去维修站多次用V AS5051+V AS5052验证过的2 Faults Found:01596 - Motor for Outside/Recirculated Air Flap (V154)30-10 - Open or Short to B+ - Intermittent01596 - Motor for Outside/Recirculated Air Flap (V154)41-10 - Blocked or No V oltage - Intermittent15 - AIRBAG 6Q0 909 601 E 07 AIRBAG VW5 0007Coding: 12343 WSC 1234517 - 仪表/IMMO 6Q0 920 800 KOMBI+WEGFAHRSP VDO V16Coding: 00141 WSC 57952LSVFA49J732012842 VWZ7Z0C683158519 - 网关6N0 909 901 14 GA TEW AY CAN 1S33Coding: 00014 WSC 1234525 - IMMOBILIZER(因为该车无电子防盗实际上这是17仪表抢答的)Controller: Bitte AdressComponent: e 17 eingeben46-J393(T23+T12C)舒适系统6Q0 959 433 G 4W Komfortgera 0002 Coding: 00064 WSC 12345 (coding 为00264 可多控制后面2个门) J386(T12d+T8h+t12e)左前门: 6Q2959802A 4W Tusteuer.FS KLO 0001J387(T8i +T6p+T12f)右前门: 6Q2959801A 4W Tusteuer.BF KLO 000156 - 收放机 6QD 035 152 Radio 5GD 0001Coding: 00001 WSC 1234509 - 电源与继电器管理6Q1 937 049 C 00 BN-SG. 1S33Coding: 25612 Code: WSC 1234544 - 转向助力 6Q0 423 156 Q LenkhilfeTRW V250Coding: 10140 Code: WSC 1234503 - ABS 6Q0 907 379 L ABS FRONT MK60 0101Coding: 0001097 WSC 12345上海大众菠萝全车电脑版本号15 6Q0909601E 07 AIRBAG VW5 0007CODING:1234317 6Q0 920 800 & ........... VDO V13CODING:0014119 6N0 909 901 14 CE CANcoding:0001409 6Q1 937 049C 00.BN -SG 1S32coding:2561201 036 906 034DM m......4MZ 4449coding:0007101 06A 906 032 JCME7.5.104686coding:0007103 6Q0 907 379 E 0103 ABS MK60coding:00010972002 款GOLF 全车电脑版本号17-仪表与IMMO1J0 920 826 A KOMBI+WEGFAHRS. BPV V09 CODING:01112 WSC:00000VIN: WVWZZ Z1JZ2 D1910 77IMMO SN: VWZ6Z 0A378 861101-发动机I06A 906 033 AF SIMOS33 1.6l 2V 00A T4083 CODING:00033 WSC:31414VIN: WVWZZ Z1JZ2 D1910 77IMMO SN: VWZ6Z 0A378 861102-自动波01M 927 733 JH AG4 Getriebe 01M 4830 CODING:00000 WSC:0000046-中控与舒适系统1C0 959 799 B 1C KomfortgerβHL0 0003 CODING:00259 WSC:314141C1959801A 1C Tsteuer.FS KL0 00021C1959802A 1C Tsteuer.BF1C0959811A 1C Tsteuer.HL HL0 00021C0959812A 1C tsteuer.HR03-ABS系统1C0 907 379 J ABS FRONT MK60 0103 CODING:0001025 WSC:3141415-气囊系统1C0 909 605 A 27 AIRBAG VW51 01 02CODING:12855 WSC:31414奥迪大众控制器编码编码原则:A:用设备读出旧电脑（或找一相同配置车辆读出电脑版本号)B:将电脑版本号1 字不漏记录到维修日志C:根具电脑版本号和索引号寻找代换的电脑注意：已经爆炸的气囊电脑不可以二次使用B:根据车辆配置或老的脑版本号记录用控制器编码功能写如代换电脑注意: 25-IMMOBILIZER 电脑的CODING 号码代表的是通讯波特率不需要进行控制器编码提示：换电脑零件号9位，索引号1-3位必须一样,硬件名称，制造商代码,硬件版本号最好相同WSC:维修站号码，不用理会它，这样同样的CODING号码才能编入。
美能达1054 2030 代码大全
美能达1054 2030 代码大全MINOLTA EP-1054 自诊码及维修代码MINOLTA EP-1054 自诊码及维修代码IOLTA EP—1054 自诊代码C0000 主电机传动故障C0001 主电机传动异常C0010 PC鼓驱动电机动作故障C0011 PC鼓驱动电机动作异常C004C 冷却风机转动故障C004E 电源冷却风机转动异常C0070 加粉电机转动故障C0071 加粉电机转动异常C0400 暴光灯故障C4100 暴光灯异常C0500 定影器故障C0510 异常低的定影温度C0520 异常高的定影温度C0600 扫描电机故障C0610 镜头电机故障C0620 反光镜电机故障C0E10 AE传感器电瓶故障C0F30 AIDC墨粉浓度传感器故障进入维修方式STOP 0 0 STOP 0XXX电气/图象调整手动方式最大暴光量电压调整按STOP 0 0 STOP 0 1 1 3，按等倍键选择灯电压设定方式，按复印键暴光灯亮，用无级变倍键调整灯电压为81V手动暴光方式最佳暴光设定调整按STOP 0 0 STOP 0 1 1 3 按变倍键改变数值，按增大键，图象变浅，按减小键，图象变深自动方式最佳暴光设定调整按STOP 0 0 STOP 0 1 1 5 按复印键，机器进行自动调整ATDC 传感器调整按STOP 0 0 STOP 0 1 1 8 按复印键，机器进行自动调整前沿定位调整〈等倍〉按STOP 0 0 STOP 0 1 按STOP按复印键，按4按复印键，按C键用数字键输入新值按复印键前沿定位调整〈放大〉200%按STOP 0 0 STOP 0 1 按STOP按复印键，按两次1键按复印键，按C键输入新值按复印键图象前端消边宽度调整按STOP 0 0 STOP 0 1 按STOP按复印键，按1.2和复印键，按C键输入新值按复印键出厂设置参数STOP 00 STOP 0 1 STOP START 按数字键输入代码0-13，START按C键清除旧数据，按数字键输入新数据，按START键存储，按还原键2次返回正常状态A0 镜头焦距设定标准=50 调整范围49-51A1 镜头1：1位置校正标准=50 调整范围42-57 每一数字=4个校正单位A2 反射镜1：1位置校正标准=50 调整范围42-57每一数字=8个校正单位A3 放大缩小长度比率调整标准=50 调整范围42-57每一数字=0。
大众零件编码
常见车􀩟 编码汇总(仅供参考)捷达1.6L系统零件号编码01 发动机1GD 906 033 A 1.6L /.V SIMO S3WOOA ISC04 OOOOI(MT)00003(AT)03 防抱死制车1J0 907 379 P ABS .0IE CAN 000101901 . '+ a' _/ G# G' {8 {9 G! Q% c* F15 安全气囊4D0 959 655 A AIRBAG III AUDI DOO 001.7 % K- {/ C '# z) M .5防盗系统1GD 953 .5701 发动机06A 906 018 GE 1.6L R4/5VS MOTR AT 001 : g( S- J； Q) _6 h 040300.自动变速箱01M 9.7 733 GF 0000003 防抱死制车3A0 907 379 ABS ITTA E .0 GIVD0 03604049 C CLIMA TROWTC C.000 01100 7 f9 t$ r( V9 |$ C* R! o$ m, n+ t* D+ H& n' n: D) W6 L4 P6 b08自动空调3B1 907 044CCLIMATRONIC C ..0.0 0110015 安全气囊1C0 909 601 .K Airbag VW51 0004 1.875 ' O* L L7 k： |& s T17仪表板1J5 9.0 8.6A KOMRITWEGFAHRSP VDO V04 051..19 网关6N0 909 901 Gateway46 舒适模 􀨫 ICO 959 799C 18 Komfortger BF HLO 0003 b$ @+ R3 F , q00.59 7 m+ j, C: c6 B56 收音机 3BD 035 186 Radio 5GD 0001 00403 6 B! f, d4 v" ])m. ]! ~. r2 W ： u49奥迪 A4 1.8T 9 X! f2 }* n$ }& E. e*、’ R4 g8 O, |; m 系统 零件号)W2 d0 K) d7 '& _ 编码]01 发动机 8E0 909 518 A 1.8L R4/5VT 003 11581 0.自动变速箱 01J 9.7 156 CP 5VTRdW .010 00001 ' c7 [6 s+ y" D& ]03 防抱死制车 8E0 614 517 ABS/ESP front 17.6 04.79 ) c8 A ； J+ v, S% X) v! ] m# i08自动空调8E08.0 043 A A4 Klimaautomat 071. 0000015 安全气囊 8E0 959 655 Airbag 8.4E 30011060. ' y0 E, s, \. A7 i' Z) c17 仪表板 8E0 9.0 930 K KOMBI+WEGFAHRS. RB4 D.. 00000 / H# t$ f, w5 g0 V( s/[$ N45内部监控8E0 951177 Innen raumueberw. 0504 00001 |46 舒适模 􀨫 8E0 959 433 AH Komfortgeru T1B 0617 . U9 [& Q6 B ( [7 E0 p06730 4 W/ T/ j( w: g8 F0.自动变速箱 8E0 9.7 156 G AG5 01V 3.0L/5V RDW 0808 0000001,D2 g9 o9 @! F03 防抱死制车 6 z. '# '& n4 q" j8 y: G: g6 o/ k) W8E0 614 517 A ABS/ESP ALLRAD 17.6 0449708 自动空调 8E0 8.0 043 AE/MA4-CLIMATRONIC 1.19/1116 0000003 防抱死制车 3B0 614 111 ABS/ASR 5.3 FRONT D00 000..+ U5 a% D1 a& Q/ G( D#k0 f- |k<->CAN 0000 00006 9 Q! L0 W! H, L2 19 l, J4 ]/ H/ W C; O ])08自动空调4B08.0 043 H A6-Klimauollautomat D64 00140 15 安全气囊4B0 959 655 G AirbagFron gt+Seite .001 0000417 仪表板4C0 9.0 900 A C5-KOMRI INSTR VDO D1.00144 $ X# v8 Y# F4 v35 中控锁4B0 96. .58 J Central lock/Alarm D35 00001 .m9 u& j3 P0 F9 U" g56 收音机4C0 035 186Radio 00.010455. ) A+ U+ Z& b% e5 Z B' Y0.自动变速箱4B0 9.7 156 AL AG5 01V ..4L5V RHW .5.6 0001303防抱死制车3B0614 111 ABS/ASR 5.3 FRONT D00 00031 ! U5 L, p； U6 x9 s08 自动空调4B0 8.0 043 AF 2 F- K7 J) B； lA6-Klimavcllautomat D65 00160 : ?1 r7 T- a' K$ \5 do s9 h15 安全气囊4B0 959 655 G Airbag Fronttseite .000 9 B8 V7 W： A7、, \" X* @ 0000450 & O, x1 Z3 G% E! N! F! J: K0 W+ G17 仪表板4C0 9.0 930 A C5-KOMHI INSTR VDO D09 0006. ; b/ X, T/ z/ } G. h； ?9 i v$ A35 中控锁4B0 8 6 A& t7 x- B" i( x5 e96. .58 E Zen tralverrieg.DWA D34 04683奥迪A6 2.3TDI系统零件号编码！ P+ O. [# C) R: V @) A$ G/ W01发动机8E0907 401 G ..5I/4VTEDC 0000 AG 0001 01001( R7 J( A" s. A* E3 ] 15 安全气囊4B0 959 655 R 9 j； s+ @* z1 jAirbag Front +Seite 0001 00.04 8 m$ X& t8 X4 F1 \8 s17 仪表板4C0 9.0 930 C C5-KOMBIINST R. VDO D1.0016055 氙气灯调整4Z7 907 357 dynamische L WR D09 00040奥迪A6 2.8L 1 Z8 p) q* '" t5 l" H3 '系统零件号编码! c/ u' I4 p# X! [: u9 k5 L01 发动机3B0 907 551 BF ..8L V6/5V G01 001 0455. $ _8 O) p5 p; ?) B/ q: e0.自动变速箱4B0 9.7 156 AJ ;p;乙 W( A& s- L03 防抱死制车3B0 614 111 ABS/ASR 5.3 FRONT DOO00031 ! n$ J; ]4 Q6 Y2 Y; l: W2 b |08 自动空调4B0 8.0 043 AF A6-Klimavnllautomat D65 0016015 安全气囊4B0 959 [0 G(〜)F3 r! Q) }# i) v655 G Airbag Fron ttseite .001 0000417 仪表板4C0 9.0 930 A Ch-kOMRIINSTR VDO * I6 Y" @： i； Y( K$ q( sD1.0016.35 中控锁4B0 96. .58 J Central Lock/Alarm D35 0673145内部监控4B0907 357 LEDCHTWETTEREGLER D004 0000556 收音机4C0 035 186 Radio D0.00.07高尔夫]系统零件号编码： b+ v/ E, j! N01 发动机06A 906 033 AF SIMOS33 1.6l .V 00AT408300033 7 e7 G& B/ t# w) P* 〜/ d, ? |0.自动变速箱01M 9.7 733 JH AG4 Getriebe 01M 4830 00000 4 I： h( r- J： x# ?03 防抱死制车1C0 907 6 m; L% X x8 G8 S9 g% K6 s( |379 J ABS FRONT MK60 0103 010.515 安全气囊1C0 909 605 A .7 AIRBAG VW51 01 0.1.855 % w2 k4 b6 u8 @: j17 仪表板1J0 9.0 8.6 A KOMBI+WEGFAHRS. BPV V09 0111. , g5 r$ h. A- |& P9 P5 G1 t46 舒适模􀨫； 1C0 959 + h9 q5 o" c1 X3 T1 o7 e& U799 B 1C Komfortger B HL0 0003 00.59 % K9 Q3 e+ G! D% e$ o4 Q" o( j迈腾系统零件号编码o' C3 |7 X$ C/ w8 A0 H01 发动机06J 906 0.6 C u) U3 ?( G* a- N1 OMED17.5 1576 19070160 # S% E1 J6 H5 U6 V5 b0.自动变速箱09G 9.7 750 GN AQ .50 6F 1055 00003.8 1 Q$ \3 g, T4 R03 : E) n( J5 V; U+ '# S防抱死制车3C0 614 109 D J104 C4 440 V . 0003 0000318 - C/ M) T$ m： P) E2 |) B 08 自动空调3C0 907 044 BPClimatro nicPQ46 1.. 0707 000000017 仪表板3C0 9.0 871 D KOMBIINSTRUMENT VD11.16 000710551 : b+ g! g! P6 u) t% P$ y. D速腾1.8T系统零件号编码01 发动机06A 906 03. TR BOSCH 1.8l ]& R& w) p0 A4 s7 O5VT G 00.0 00085700.自动变速箱09G 9.7 750 EQ AQ .50 6F 086. 000.1.0 ~( ?. Q6 b$ P# M- E03防抱死制车1K0 907 379 AA ESP FRON 010. 00.11.. $ {- f8 f) g& 〜r. u" x' c15 安全气囊K09 096 05R 45 AIRBAG VW8 018 0300 001336508 自动空调K09 070 44B D Climatro ni cPQ35 090 0808 000000016方向盘1K0 953 549 AG J05.7 034 0070 001.0..途锐4.2L系统零件号编码']1 Y8 A1 d. ?01 发动机4D0 907 * V9 K 0( n |1 q7 B1 }560 DA 4..L V8/5V G 0050 0007875 ; V) j3 c4、2 z# C0 A& ?： W& v x7 E05访问/起动授权系统0 '& t! y& ]8人3 l" Q3D0 909 135 M Kessy 6400 0131304 \2 [5 |6 k% t；〜)c% L2 d08 自动空调7L6 907 040 H CLIMAtro nic R/L X 37160000030 ' ]% D) k# \2 R! |2 % Y15 安全气囊3D0 909 601 C 05 Airbag 8.4E++H01 035. 001.34117仪表板7L69.0 980 M KOMBIINSTRUMENT RB8 .9.. 000513119 CAN 网关6N0 909 901 GatewayK<>CAN 0101 0000006 / n+ r8 J3 W% H7 u46 中央舒适模􀨫 7L0 959 933 C B0 HSG 01010000085桑塔纳2000 1.8L系统零件号编码01 发动机1.8L R4/.V MOTR HS D04 ) C$ T . ?% g- M" V+ _2 A桑塔纳3000 2.0L系统零件号编码01 发动机33D 907 449 K..0L .V M5 EV3 00.0 000000017 仪表板33D 9.0 800 D KOMBIINSTRUMENT SDE .115 7 q： k" |7 Q, q3 3 T7 G, Q 0304. # w8 H0 y3 I$ R) ]% 0v& V6 18 F% 〜03防抱死制车3B0614 111 ABS/ASR 5.3 FRONT D00 000.117 仪表板3B0 9.0 9.5 B KOMBI WEGFAHRSP VDO / C! E5 〜7 {. i4 Y3 e5 Z& \7 Z3 l [5 r* k( x+ S6 b3 V系统零件号编码+ S' H) P3 n3 # t%人3 P3 ]3 c01 发动机4B0 906 018 CQ 1.8L R4/5VT G 0001 040510.自动变速箱 3 d% # x! V" R8 L: h4B0 9.7 156 DA AG5 01V 1.8l 5VT RdW 1313 00113 : X5 b& l, t Z a* N&『j J03 防抱死制车1J0 907 379 Q ABS/EDS ' s； u7 q X. e.0 I E CAN 0001 13604 9 Q. @# V% w/ J( Y T08 自动空调3B1 907 044 J CLIMATRONIC B5GP 0004 17000 , }, B9 g3 I： M! @2 ~7 V k% m15 : U4 0/ ~# K @' M8 ?; B |17 仪表板3BD 9.0 806 B ]KOMBI+WEGFAH RSP VDO V01 051.5帕萨特B3 2.8L系统零件号编码-'! }# m+ U- b01 发动机3B0 907 551CP ..8L V6/5V G 0001 08051 0 A- b( f4 u. G( @- K% k0.自动变速箱8D0 9.7 156 DJ AG5 01V ..8l5V RdW 11110011303 防抱死制车1J0 907 379 Q ABS/EDS .0 IE CAN 0001 1360408 自动空调3B1 907 ' U7 D: @2 乙 @3 ~7 D1 s044 J CLIMATRONIC B5GP 0003 1700015 安全气囊1C0 909 605 B XJ AIRBAG VW51 04 0...60.17 仪表板3B1 959 760 D Sitzverstellung 0101 0000055 氙气灯调整4B0 907 357 3 y" i0 r5 A" H"乙 k8 f: tLEUCHTWEITEREGLER D004 00015 9 l- e* j* X3 b/ 〜& x波罗 1.4L MT " m9 d; }" {# Z& A9 H2 Q系统零件号编码01 发动机036 906 034 DMMARELLI 4MV 4837 00071 ) \3 L* M/ L, 13 u03 防抱死制车6Q0 907 379 L ABS FRONT MK60 01097 3 U% v7 W# I- f o15 安全气囊 2 G5 e: U" C! '& w L! z" C6Q0 909 601 E 07 AIRBAG VW5 0007 1.34317 仪表板6Q0 9.0 800 KOMBI+WEGFAHRSP VDOV16 0014119 网关6N0 909 901 14 GATEWAY CAN 1S33 00014 6 D5 g F' a! b/ g5 t! R46 舒适模􀨫 6Q0 959 433 3 |# J, i$ T% z' eG 4W Komfortgera 00064 / S3 |. {)O0 d5 e9 D0 b" m44辅助转向6Q0 4.3156 Q Len khilfeTRW V .50 10140 , m( W( U3 w' F! {: p L波罗1.6L AT系统零件号编码6 |8 U0 B; T8 v [* '0 A01 发动机06A 906 03.TH BOSCH ME7.5.10 000750.自动变速箱09G 9.7 750 BJ AQ .50 6F 066. 000.1.003 & ]5 h! N( B/ x* A, v c034 B A4-KOMBIINST R. VDO V01 0014.46 中央舒适模􀨫 J09 597 99AH 5H Zentral-S GKomf. 0001 04097 1 E7 C- O3 12 s-丨 g' N& H奥迪Q7 4.2L系统零件号编码01 发动机4L0 910 560 D 4.丄V8/4V 3 ?! f： i7 g, _, Y . F. Q$ J FSI 0050 - u6 a% 〜；m6 L+ U1 J01.10.001 - C '5 v* h% x+ S4 e$ '2 s ~4 x90f056003 防抱死制车4L0 910 517 A ESP ALLR 013000.155308 自动空调4L0 910 043 KLIMABETAETIGUNGH05 0060 0786504 15 安全气囊4L0 0 P7 U/ R7 17 ]) | a910 655 B 30 AIRBAG AUDI8RH39 01.0 001310417 仪表板4F0 910 900 C KOMBIINSTR.M73 H11 0170 .67314837 导航系统4E0 910 888 B J0401 NAV CN H41 0410 ! Q+ C) '! }3 u, C+ L8 b 0000000 7 F" m7 r , M4 L3 Y . A1 U( I4 S# j( o46 中央舒适模􀨫 4L0 910 .89 F Komfortgeraet H07 0040 761060955氙气灯调整F09 103 57F AFS 1 H01 00.0 00000..56 收音机4E0 910 541 Q TUNER EU/US/RDW H4. " l: 10 V , E$ Q. r) U* T+ e8 o7 g2 R 06.0 000000765 轮胎气压4F0 910 .73 B Reifendruck 3 H05 0100 01..4.4 : e： to BO @1 K4 y @9 _, H7.右后门控制17 仪表板4E0 910 900 KOMBIINSTR. VDO H4. 0060 0000..308 自动空调.b! w9 U, w, r0 q. }; m* a! Y4E0 910 043 KLIMAAUTOMAT 015 0.40 0037185。
VW故障码分类三
0151205E8滑动天窗控制单元B 0151305E9倾斜天窗不能下降C 0151405EA滑动天窗调节器C 0151505EB舒适系统释放信号B 0151605EC接线柱30，左侧B 0151705ED拖车识别装置控制单元-J345C 0151805EE左侧倒车灯灯泡-M16B 0151905EF右侧倒车灯灯泡-M17B 0152005F0雨量与光线识别传感器-G397C 0152105F1轮胎压力传感器B 0152205F2电话手持话机-R37C 0152305F3电话话筒-R38C 0152405F4电话天线C 0152505F5Telematik电话卡C 0152605F6紧急呼叫按钮-E276B 0152705F7抛锚救助按钮-E275B 0152805F8电子通信系统附加天线-R90C 0152905F9电子通信系统附加扬声器-R91C 0153005FA收音机闭音开关C 0153105FB紧急蓄电池B 0153205FC至组合仪表的信号导线B 0153305FD接线柱56（大灯）B 0153405FE控制左侧大灯照明距离调节伺服电机-V48BB 0153505FF控制右侧大灯照明距离调节伺服电机-V49 015360600车辆放下C 015370601汽车高度传感器-电源C 015380602大灯照明距离调节伺服电机-V48/V49B 015390603大灯未调节B 015400604大灯被降低B 015410605大灯被升高B 015420606偏转率传感器-G202C 015430607驻车辅助报警蜂鸣器-H15B 015440608驻车辅助指示灯-K136B 015450609左后驻车辅助传感器-G203B 01546060A驻车辅助传感器，左后，中部-G204B 01547060B驻车辅助传感器，右后，中部-G205B 01548060C右后驻车辅助传感器-G206B 01549060D驻车辅助传感器的电源B 01550060E倒档信号B 01551060F中央集控门锁关闭信号B 015520610驾驶员车门中央集控门锁电机-V56，锁止BB 015530611前座乘客车门中央集控门锁电机-V57，锁015540612中央集控门锁电机－后部车门，锁止B 015550613中央集控门锁电机，SAVE B 015560614中央集控门锁电机，解锁B 015570615驾驶员侧锁芯内接触开关-F241，开启B 015580616驾驶员侧锁芯内接触开关-F241，关闭B015590617驾驶员车门B 015600618前座乘客车门B 015610619左后车门B 01562061A右后车门B 01563061B驾驶员侧车内联锁开关-E150，锁止B 01564061C驾驶员侧车内联锁开关-E150，解锁B 01565061D行李箱照明灯-W3C 01566061E车内监控信号激活B 01567061F防盗报警装置接触开关-F120B 015680620舒适开启信号C 015690621舒适关闭信号C 015700622接线柱15延时切断B 015710623座椅位置记忆信号C 015720624由前座乘客侧车门接触开关触发的报警B 015730625由左后车门接触开关触发的报警B 015740626由右后车门接触开关触发的报警B 015750627控制切断B 015760628导流板电机电机热保护D 015770629因温度过高而切断B 01578062A安全气囊关闭指示灯，前座乘客侧-K145B 01579062B座椅占用传感器信号，前座乘客侧-G128C 01580062C儿童座椅占用传感器，前座乘客侧-G211C 01581062D识别到错误的部件B 01582062E冷却液温度信号C 01583062F探测到系统泄漏B 015840630车辆太低，启动抬高D 015850631前座乘客侧锁芯内接触开关-F242，开启B 015860632前座乘客侧锁芯内接触开关-F242，关闭B 015870633驾驶员侧安全气囊引爆装置 -2- -N250B 015880634驾驶员侧头部安全气囊引爆装置-N251B 015890635前座乘客侧头部安全气囊引爆装置-N252B 015900636蓄电池断路引爆装置-N253B 015910637安全气囊关闭指示灯，驾驶员侧-K144B 015920638空气纯度传感器-G238C 015930639可加热风挡玻璃-Z2C 01594063A发电机接通继电器-J442C 01595063B轮胎压力监控按钮-E226BC 01596063C新鲜空气/空气内循环风门伺服电机-V154 01597063D驱动蓄电池预充电线路B 01598063E驱动蓄电池电压B 01599063F电子驱动装置主继电器-J437C 016000640发动机控制单元的节气门信号C 016010641电机中的转子位置传感器C 016020642电动驱动装置行驶电动机-V141C 016030643变流器-C21C 016040644档位识别电位计1 -G239C 016050645档位识别电位计2 -G240C 016060646蓄电池监控信号C 016070647过电流切断B 016080648指示灯测试B 016090649控制单元中的风扇B01610064A驱动方式开关-E228C 01611064B按照电子驱动方式设置双开关C 01612064C离合器调节器阀门-N255B 01613064D燃油冷却泵继电器-J445B 01614064E驱动蓄电池容量减少B 01615064F油箱盖板遥控开锁开关-E204B 016160650至车内监控的信号导线B 016170651请查询车内监控故障存储器B 016180652自动型折叠式车顶阀门-N272B 016190653后部储物舱的电机C 016200654折叠式车顶的操纵按钮-E137B 016210655支架外面的电源插头C 016220656变压器（264V/12V）-A13B 016230657发电机充电信号B 016240658驱动方式开关-E228，开始位置D 016250659前部驻车辅助报警蜂鸣器-H22B 01626065A右前驻车辅助传感器-G252B 01627065B驻车辅助传感器，右前，中部-G253B 01628065C驻车辅助传感器，左前，中部-G254B 01629065D左前驻车辅助传感器-G255B 01630065E驾驶员侧安全气囊引爆装置-N277B 01631065F前座乘客侧安全气囊引爆装置-N278B 016320660高压容量减少C 016330661热管理故障B 016340662蓄电池断路引爆装置，关闭B 016350663存储的蓄电池断路碰撞数据引爆装置B 016360664驾驶员侧后部安全带张紧器引爆装置-N19BB 016370665前座乘客侧后部安全带张紧器引爆装置-N 016380666驾驶员侧后部侧面安全气囊碰撞传感器-GBB 016390667前座乘客侧后部侧面安全气囊碰撞传感器016400668驾驶员侧后部安全带开关-E258B 016410669前座乘客侧后部安全带开关-E259B 01642066A驾驶员侧后部座椅占用传感器-G177B 01643066B前座乘客侧后部座椅占用传感器-G178B 01644066C驾驶员侧后部侧面安全气囊关闭B 01645066D前座乘客侧后部侧面安全气囊关闭B 01646066E驾驶员侧头部安全气囊关闭B 01647066F前座乘客侧头部安全气囊关闭B 016480670驾驶员侧后部安全带张紧器关闭B 016490671前座乘客侧后部安全带张紧器关闭B 016500672驾驶员侧后部侧面安全气囊碰撞数据被锁BB 016510673前座乘客侧后部侧面安全气囊碰撞数据被016520674驾驶员安全气囊钥匙开关B 016530675驾驶员侧安全气囊报警灯不激活B 016540676安全带开关报警灯B 016550677儿童座椅开关B 016560678碰撞信号B 016570679左侧儿童座椅识别开关-F263B 01658067A右侧儿童座椅识别开关-F264B 01659067B超过安全带张紧器的碰撞阈值B 01660067C超过美国安全气囊的碰撞阈值B01661067D超过RDW安全气囊的碰撞阈值B 01662067E前座乘客侧车内联锁开关-E198，锁止B 01663067F前座乘客侧车内联锁开关-E198，解锁B 016640680左后车内联锁开关-E273，锁止B 016650681左后车内联锁开关-E273，解锁B 016660682右后车内联锁开关-E274，锁止B 016670683右后车内联锁开关-E274，解锁B 016680684驾驶员座椅位置记忆按钮 4-E282B 016690685记忆功能按钮，驾驶员座椅-E283C 016700686车库门开启装置操作单元的信号导线-E28B 016710687车距控制传感器，左侧-G258B 016720688车距控制传感器，右侧-G259B 016730689制动助力器内膜片位移电位计B 01674068A制动助力器内 ADR 松脱开关B 01675068B ADR松脱开关/内膜片位移电位计B 01676068C制动助力器内ADR 松脱/压力开关B 01677068D ADR 制动作用阀门B 01678068E距离选择开关，ADR -E260B 01679068F左前轮ABS 转速信号B 016800690右前轮ABS 转速信号B 016810691左后轮ABS 转速信号B 016820692右后轮ABS 转速信号B 016830693车乱转速信号/车速B 016840694柴油直接喷射装置控制单元 2 -J494B 016850695空气质量流量计 2 -G246C 016860696散热器风扇继续运转控制单元-J138B 016870697增压压力限制电磁阀 2-N274C 016880698冷却液泵继电器-J235B 016890699变速箱支座阀B 01690069A燃油压力传感器-G247B 01691069B燃油压力调节阀-N276B 01692069C冷却液辅助泵继电器-J496B 01693069D节气门阀门-N211B 01694069E安全气囊信号导线B 01695069F燃油温度传感器2-G248B 0169606A0左后脚部空间照明灯-W45C 0169706A1右后脚部空间照明灯-W46C 0169806A2车窗升降器释放信号B 0169906A3中央集控门锁电机，后行李箱盖-V53B 0170006A4防盗报警装置信号喇叭-H8B 0170106A5车内照明灯变光C 0170206A6左侧脚部空间照明灯-W9C 0170306A7右侧脚部空间照明灯-W10C 0170406A8接线柱58 (照明变光)C 0170506A9后视镜调节转换开关-E48B 0170606AA后视镜调节开关-E43B 0170706AB前座乘客侧车门接触开关-F3B 0170806AC左后车门接触开关-F10B 0170906AD右后车门接触开关-F11B 0171006AE中央集控门锁电机，驾驶员侧 B 0171106AF中央集控门锁电机，前座乘客侧 B0171206B0中央集控门锁电机，左后B 0171306B1中央集控门锁电机，右后B 0171406B2音频/电话转换C 0171506B3电话对讲功能C 0171606B4GRA-恢复/加速功能控制C 0171706B5GRA-存储/减速功能控制C 0171806B6GRA关闭功能控制C 0171906B7纵向调整传感器，前座乘客座椅-G278C 0172006B8靠背调节传感器，前座乘客座椅-G279CC 0172106B9后部高度调节传感器，前座乘客座椅-G28C 0172206BA前部高度调节传感器，前座乘客座椅-G28 0172306BB头枕高度调节传感器，前座乘客侧-G282CC 0172406BC纵向调整开关，前座乘客座椅-E64，向前C 0172506BD纵向调整开关，前座乘客座椅-E64，向后C 0172606BE靠背调节开关，前座乘客座椅-E98，向前0172706BF靠背调节开关，驾驶员座椅-E98，向后CC 0172806C0后部高度调整开关, 前座乘客座椅-E66，C 0172906C1后部高度调整开关, 前座乘客座椅-E66，C 0173006C2前部高度调整开关, 前座乘客座椅-E65，C 0173106C3前部高度调整开关, 前座乘客座椅-E65，0173206C4前座乘客座椅头枕调整开关-E170，向上C 0173306C5前座乘客座椅头枕调整开关-E170，向下C 0173406C6后视镜调节水平方向电位计，驾驶员侧CB 0173506C7后视镜调节水平方向电位计，前座乘客侧0173606C8后视镜调节垂直方向电位计，驾驶员侧BB 0173706C9后视镜调节垂直方向电位计，前座乘客侧B 0173806CA前部安全气囊碰撞传感器，驾驶员侧-G28 0173906CB前部安全气囊碰撞传感器，前座乘客侧-GBB 0174006CC安全带张紧器引爆装置 -2-，驾驶员侧-N 0174106CD安全带张紧器引爆装置 -2-，前座乘客侧B 0174206CE膝部安全气囊引爆装置，驾驶员侧-N295BB 0174306CF膝部安全气囊引爆装置，前座乘客侧-N29 0174406D0点火起动开关-D (接线柱P)C 0174506D1对讲机按钮-E76C 0174606D2报警装置开关-E75B 0174706D3可加热方向盘的传感器-Z36C 0174806D4方向盘中Tiptronic开关，向上-E438C 0174906D5方向盘中Tiptronic开关，向下-E439C 0175006D6方向盘中多功能按钮，左侧-E440C 0175106D7方向盘中多功能按钮，右侧-E441C 0175206D8可加热式方向盘-Z36C 0175306D9车窗玻璃刮水器电机-V ，第1档C 0175406DA车窗玻璃刮水器电机-V ，第2档C 0175506DB车灯开关-E1，停车灯B 0175606DC前雾灯和后雾灯开关-E23, 前雾灯B 0175706DD大灯清洗泵-V11B 0175806DE制动灯灯泡B 0175906DF双音喇叭继电器B 0176006E0转向辅助控制单元-J500 没有与发动机控B 0176106E1翻车保护装置电磁阀，驾驶员侧-N309B 0176206E2翻车保护装置电磁阀，前座乘客侧-N310B0176306E3翻车保护激活次数太多BD 0176406E4注意：必须打开折叠式车顶。
Supplier_Guide_Product_Development_V.30_Translated_EN_2015-05 (Abstract)
Supplier's guide for product developmentPart 2-core processes 20© Volkswagen, 1446, Konzern-EntwicklungssteuerungSupplier's guide for product development2.1 Procurement processA main focus of the present guide are subjects which are from the point of view of the technical development for new suppliers within the scope of the product development of the biggest meaning. An introduction to processes relevant for suppliers and applications which lie in the area of responsibility of the procurement also counts to it.2.1.1 introductionThe procurement of the Volkswagen group is split in the ranges of Procurement for production material and general procurement. The range of Procurement for production material is made up again of the Commodities displayed in illustration 11.Illustration 11: Overview of the different ranges of the procurementProcurement decisions become short in the Volkswagen group of the Corporate Sourcing Committee (: CSC) grieved. The decisions of this committee are valid about all marks away.Beside the central procurement ranges of every mark the Volkswagen group seats so-called regional shopping offices (RSO = On the regional level Sourcing of office) to open new procurement markets and to upgrade passing ones. Illustration 12 makes clear the present activities of regional procurement offices worldwide.© Volkswagen, 1446, Konzern-Entwicklungssteuerung21Procurement for production materials: parts and components forthe vehicleGeneral Procurement: resources, production of good and services for theproduction processresources, services and systemsProjectPurchasing & Buying Parts Managementmetalinteri orexteriorElectric al & Electron icsSupplier's guide for product developmentRegional offices (Ros) Lander assignmentCentral Europe Eastern EuropeNorth Africa Turkey IndiaIllustration 12: Regional procurement offices of the Volkswagen group worldwide2.1.2 Division of the procurement processesWith the choice and nomination of group suppliers two different procurement processes play a role. These are:❑ Forward Sourcingfor parts to be produced and newly to be developed. This process is used in general with developmentprojects for new vehicles or aggregates❑ Worldwide Sourcingfor the already existing parts manufactured after drawing which should be procured at the respectivemarket locally. The destination of this process is to create market transparency, to optimise thelogistics costs as well as to improve the quality of standard parts.For new ones as well as for standard parts a worldwide inquiry and assignment strategy occurs.The division of the procurement processes is displayed in illustration 13 figuratively.22© Volkswagen, 1446, Konzern-EntwicklungssteuerungSupplier's guide for product developmentIllustration 13: Division of the procurement processes2.1.3 Component procurement in the product process of developmentIn principle two different process attempts are used in the Volkswagen group with Forward Sourcing and Worldwide Sourcing for the component procurement. The temporal classification of these processes in the product life cycle makes clear illustration 14.Illustration 14: Differentiation between Forward Sourcing and Worldwide Sourcing processThe Forward Sourcing process is used with new projects and is linked up to the market launch (ME) with the so-calledpurchase part management process. This process being based on the gate principle makes sure that suppliers are able with manufacturing beginning (SOP = start of Production) to deliver the concerning extents in the respective number of pieces or quality what reduces the project risk again.© Volkswagen, 1446, Konzern-Entwicklungssteuerung23For new parts in existing models in new modelsFor existing share in existing models in new models (carry-over parts)Supplier of highperformance of unit and subsequent production ResponsibilitySupplier with lessdevelopment content as reproducer and / or second applicant for partial volume.before commercial launch After commercial launchForward Sourcing (new parts)Purchased PartsManagement- Forward SourcingGlobal Sourcing (existing components) Purchased PartsManagement-Global Sourcingsupplier information and offersupplier SelectionOf the Worldwide Sourcing process, however, is used only after the market launch of a product and isaccompanied by a suitable purchase part management process with different gates. You find closer information to the purchase part management process for Forward Sourcing and Worldwide Sourcing in chapter 2.5 "Purchase part management".Forward Sourcing processThe procurement process for suppliers in development projects encloses basically three phases displayed in illustration 15.Illustration 15: Phases of the Forward Sourcing of processPhase 1 - Supplier Self-Disclosure and offerThe Volkswagen group determines potential suppliers on the basis of themSupplier Self-Disclosure (LSA). The Volkswagen group transmits to the supplier the inquiry documents (also inquiry package called) on basis more technically, more financially, organizational as well as qualitative demands. The supplier edits these documents and as a result transmits his offer to theVolkswagen group. The suppliers who have received an inquiry must fancy in this phase, besides, with the suitable development department. Besides, the presentation should contain information todeveloping competence and available technologies. The template of pattern parts has turned out in this connection as especially helpful. The contact data of the concerning development department can be taken from the inquiry documents.24 © Volkswagen, 1446, Konzern-EntwicklungssteuerungSupplier Profile and offerSupplier selectionapproval process for Forward Sourcing -suppliers list-Registration on Group Business Platform-Supplier Self-Disclosure -preselection for inquiry -Request to supplier -range of Volkswagen-Presentation of the technical concept in the technical development-TE-Audit-process Audit -Suppliers decision -notification about nomination-kick-off event -SET-work-Purchase Parts Management-Component clearancesproduction releaseSupplier nominated and the beginning of the development process as a first supplierHit Supplier ScreeningTip: With the establishment of contact with the range of Development the supplier should take care with the respective development department proactively of the exhibition of a suitable secrecy arrangement.The arrangement itself is edited about the department of Te of service / office (departmental abbreviation / G).Phase 2 - supplier's choiceThe results of the supplier's judgment with which the abilities (Te and process audit) and capacities of a supplier are determined flow in onto the decision of the group to the nomination of component suppliers. At the end of the ability judgment the supplier receives the classification A, B or C and for a nomination atleast the classification B is necessary. Suppliers with the classification B are obliged to put up anoperation plan with improvement measures. After successful qualification a renewed audit is carried out.An overview about the contents of both audits gives illustration 16.Illustration 16: Overview about the contents of the Te and process audit in the supplier's choiceThe final procurement decisions of the Volkswagen group are based on the one hand on the entries of all partners and, on the other hand, on strategically considerations as well as on the competitiveness of the submitted offers. On this occasion, is to be mentioned that all procurement decisions are madeunanimously.Phase 3 - release process for Forward SourcingIn this phase the Volkswagen group monitors the capacity of the supplier within the respective project.For main components the process of the purchase part management is applied. Besides, are seated to so-called gates - measuring dots for the capacity classification of the supplier - and releases specific for component are monitored. The single gates are closely connected with vehicle landmarks. Developing releases can be thereby traced and it can be guaranteed, that the pattern parts for the respective one© Volkswagen, 1446, Konzern-Entwicklungssteuerung25Landmark are delivered. The purchase part management process becomes short from so-called purchase part management-teams (: KTM teams) monitored and controlled. These consist of representatives of different function ranges and are responsible for the following dots:❑ Realization of regular project talks ❑ Sequential monitoring of the supplier.Global Sourcing processThe procurement process for suppliers within the scope of the Worldwide Sourcing corresponds Extensively to that of the Forward Sourcing:Illustration 17: Phases of the Global Sourcing processPhase 1 - Supplier Self-Disclosure and offerPhase 1 corresponds to that of the Forward Sourcing process. Phase 2 - supplier's choiceThe second phase also corresponds to that of the Forward Sourcing process, howeverif begins after the nomination a process in whose course the supplier industrializes the component for manufacturing and develops as a second developer on the basis of available function and construction space default.26 © Volkswagen, 1446, Konzern-EntwicklungssteuerungSupplier Self-Disclosure and offerSupplier selection Purchased Parts Management Global Sourcing-Registration on Group Business Platform-Supplier Self-Disclosure -Preselection for inquiry -Request to supplier -Range of Volkswagen -Presentation of the technical concept in the technical development-TE-audit-process Audit -suppliers decision -Notification about nomination-kick-off event-Commitmentconversation-Purchased Parts Management -component clearances Hit Supplier ScreeningSupplier nominated and thebeginning of the industrialization process as a second supplierproduction releaseSupplier's guide for product developmentPhase 3 - release process for Global-SourcingThis phase resembles the purchase part management for the Forward Sourcing process.Nevertheless, differences arise with the definitions of the single gates as well as with the kind of the goods to be delivered or results of working (e.g., pattern and prototype). With projects within the scope of the Worldwide Sourcing of process gates Reviews - the final evaluations are attached by reaching of a gate - not to vehicle landmarks, but in between the supplier and the KTM team of agreed appointments.2.1.4 Group business platform and registration processThe Volkswagen group uses the group to business platform to communicate in every phase of a vehicle project with his suppliers. Started with the registration process about the offer delivery up to the pursuit of landmarks and pattern states - the group business platform forms the central turntable for the communication with all organisations of the Volkswagen group with her integrated applications.Illustration 18: Group business platform of the Volkswagen groupTip: On the group business platform there are for every range (e.g., procurement, quality assurance, development) special applications for suppliers. One or several should the applications called in this guide not be available to you, you must let this only about the B2B activate team.© Volkswagen, 1446, Konzern-Entwicklungssteuerung27SuppliersVolkswagen GroupGroup Business PlatformWorldwideinformation and communication hubB2B portalSupplier's guide for product developmentYou reach the B2B team at the following address:b2bteam@the contact data of the B2B of team you find in the range "Help" of herGroup business platform. Illustration 19 shows the range "Help" on the platform and offers an example of integrated applications.Illustration 19: Integrated applications to the group business platformRegistration processHow already in chapter 2.1.3 "Component procurement in the product process of development"described, new suppliers must go through a registration process in the first phase of the procurement process. The first part of the registration on the group business platform forms the so-called Supplier Self-Disclosure which become by choice of the button "Partner!" it is launched. The data transmitted within the scope of the Supplier Self-Disclosure are checked in the second step by the B2B team on correctness. If the data are correct, the B2B switches team the suppliers for the third and last step of the registration process freely. To conclude the registration, now the supplier must enter additional information on the supplier's data bank of the Volkswagen group. Finally the B2B user agreement must be accepted and be set up a Company administrator on the platform. The whole registration process is summarized into illustration 20.28© Volkswagen, 1446, Konzern-EntwicklungssteuerungB2B portalSupplier's guide for product developmentIllustration 20: Registration process for the group business platform (abstract)© Volkswagen, 1446, Konzern-Entwicklungssteuerung29Part 1: Become a partnerPart 2: Data ReviewPart 3: additional informationvisit:and click on the link "Become a Partner""Partners will" click on the link "Start Supplier Questionnaire" and they fill up the formData receive Confirmation and assignment of a registration numberReview of supplier self-assessment by the SITCreating the user record, the initial password registrar obtaining a user ID and for Initial registration in the protected area of the B2Bsupplier platformElectronic confirmation of the B2B User AgreementCreating a user profile for the Company Administratorin UMSCompany information incl. DUNS numberRegistration Numbertest successfulThe B2B AGREEMENT must Moreover, within 6 weeks in the original signed will be sent toVolkswagen.B2B portalSupplier's guide for product developmentYou find closer information to the registration process on the login page the group business platform:→Do you select "partner become"→"The registration process " and afterwards "Supplier Self-Disclosure start". On the left screen page a description of the registration process is available in the PDF format to the download.2.1.5 Supplier Self-DisclosureAs already in chapter 2.1.3 "Component procurement in the product process of development" described, new suppliers must go through a so-called Supplier Self-Disclosure in the first phase of the procurement process. The forms necessary for it - in Volkswagen also LSA forms called - are made available by the buyer responsible for component. The satisfactory form offers to Volkswagen the first overview about the product portfolio of the supplier, available technologies, present customers (e.g., animal one, animal two), the organizational structure (e.g., technical arrangements, joint-ventures) as well as about capacities and the respective capacity spectrum (e.g., quality assurance, development).Illustration 21: LSA formTip: The LSA form is to be filled very completely. Only so is made sure that inquiries are sent by the procurement to possible suppliers.Supplier's guide for product development2.1.6 Information specific for development in the inquiry packageThe destination of the first phase of the procurement process (supplier's information / offer) is to be decided it whether a supplier comes to the narrower choice. The offer delivery on the part of the supplier occurs online about the application "Online Requests (ESL)" (ESL: Electronic Supplier link) on the group business platform. Click on the following icon to access this application:Illustration 22: The application "Online-Anfragen (ESL)" to the group business platformOffers are specific for project and specific for component. The supplier must guarantee that all aspects find consideration concerning the used technology, the production procedure and the load notebook standards on offer. The procurement of the Volkswagen group can make sure by the fact that all offers are comparable. However, the supplier can make sure with the fact that no important and information possibly relevant for price is absent to the respective component.Illustration 23 shows the inquiry overview with the different inquiry kinds in the application "ESL".List of sent requestsIllustration 23: Inquiry overview in ESLInquiry kind Every component is requested separately. These inquiries (also RFQ or Request for Quotation) are also specific for vehicle and are divided into Global Sourcing inquiries and Forward Sourcing inquiries. You find closer information to both procurement processes in chapter 2.1.2 "Division of the procurement processes". In the inquiry list both inquiry kinds can be distinguished with the help of the abbreviations fa for Forward Sourcing and G for Global Sourcing.Contacts for every part are fixed by different ranges involved in the respective development project of Contact. These are also performed in every inquiry and are to be consulted with questions to the inquiry documents.Contents relevant for development of the inquiry package The inquiry packages relevant for development (compressed in the ZIP format) are marked in illustration 24 and must be considered in the offer delivered by the suppliers.3.Offer SpecificDocuments1. Volkswagen brand2. Volkswagen GroupSpecific inquiry ContactIllustration 24: Contact information of a selected inquiry package and contents relevant for developmentOf inquiry package1) Looks at documents specific for offer from the position of the product development, this package containsall essential, information on offer to be considered to the component requested in each case.The typical contents of such a package are performed in the following:❑ Component-load notebook (briefly: BT-LAH or LH) with closer information to himto respective developing standards (e.g., marginal conditions concerning the component or project,used technology, test standards and project management directives)Illustration 25: Component-load notebook❑ Reference drawingIllustration 26: Reference drawing as a basis for the offer❑ Draught responsibility arrangement (KV rate)Purpose of the so-called draught responsibility rate (briefly: KV rate) it is to fix the responsibilites of theparties by the development of components, modules and systems already early obligingly. With theKV rate it concerns a value specific for component which is agreed on basis of the draughtresponsibility arrangement by agreement. Further information about this subject is demonstrated inchapter 2.1.10 "Bases to the draught responsibility arrangement".2) Mark of Volkswagen The second package encloses demands specific for mark and objectives which must be considered on offer:❑ Procurement: Shopping conditions on the procurement of production material❑ Quality: Agreed high-class ability destination.3) Volkswagen group - research & developmentThe first and package to be downloaded by the suppliers on offer to be considered contains information to the following subjects relevant for product development:❑ Volkswagen group norm VW99000 "general demands toCapacity performance within the scope of the component development" see also chapter 2.1.9"juridical arrangements and their influence on technical drawings", chapters 2.2 "of The ProductDevelopment Process of the Volkswagen group" as well as chapters 2.3 "Approval processeswithin the Product Development Process "❑Supplier's manual for prototypesSee also chapter 2.7 "Prototype drawee processes and demands"❑Supplier's guide for product development (this document)❑Manufacturer's password for vehicle parts❑Template part curriculum vitae.2.1.7 Norm data bank of the Volkswagen groupDemands for e.g. components, (Raw) materials, testing methods as well as to the supply of data and components are described in the Volkswagen group with the help of internal norms.To this it is refered in technical drawings as well as in the component-load basting contained in the inquiry package. Illustration 27 shows such a reference.Illustration 27: Reference to covalid norms on technical drawingsIt must be guaranteed by all developing suppliers, that to the project themto in each case actual versions of the norms to be applied are available. This isSupplier's guide for product developmentin particular during the nomination process of meaning, because only is so guaranteed that the offer encloses all demands for components and check.The in each case actual versions of the suitable norms can be downloaded into several languages directly by the group business platform.The application necessary for it called "online norm texts" the group business platform is available to you in the range "information" under the menu dot "Tools". By clicking the following icon you reach directly to the application:In the application "online norm texts (ONNO)" can be seen following norm kinds and be downloaded: ❑Volkswagen group factory Standard – VW❑Technical condition of delivery – TL❑Test instruction – PV❑Technical guideline documentation – TLD❑Construction directive – KR❑High-class specification – QP❑Norm part drawings - N / SDL.The action with the search for norms in the application "online norm texts" is displayed in illustration 30. Norms and directives are published into different languages which are indicated by the suitable land flags. Check after appearance of the hit list which is the in each case actual version of the document.Besides, the application "online norm texts" offers the button Extents about which itself a list of norms specific for project gets which can be downloaded then at regular intervals equem.Tip: Should the application "online norm texts" on the group business platform not be indicated, get in contact please with the B2B team to apply for access. You find the contact data of the SIT in chapter 2.1.4 "Group business platform and registration process".Supplier's guide for product development Illustration 28: Application "online norm texts" on the group business platformSupplier's guide for product development2.1.8 Norm parts and repeated hasteWith all new projects norm haste and repeated haste are to be used mainly from the Volkswagen group norm VW60000 "variation reduction of connection elements". If the part spectrum is not described yet, the parts are short exclusively from the norm part administration system (: To use NVS) of the Volkswagen group. In the norm part administration system information is administered to norm parts, half witnesses and fuels.In addition, are also offered repeated haste of the group. All hyperkV-users also have in the partner company net the access privileges for the NVS (HyperKVS: see chapter 2.9.5 "surgical data interchange").With parts with limited release consultation with the department representatives of the principal (see contacts in the national carriage group norm VW60000) is necessary. The demands of the Volkswagen group norm VW60457 are valid "mechanical connection elements for mechanical connection elements; Requirement profile thread parts".Tip: A localisation of norm - or Repeat parts is to be tuned, in any case, with the release places of the Volkswagen group.2.1.9 Juridical arrangements and their influence on technical drawingsAmong the rest, the Volkswagen group norm VW99000 "general demands to the capacity performance within the scope of the component development" contains demands of juridical kind. With acceptance of this group norm the supplier (or contractor) accepts the juridical arrangement described in it.On this occasion, chapter 2.5 "juridical arrangements" of the Volkswagen group norm VW99000 is to be followed especially. Demands for the data to be provided by the suppliers (e.g., technical drawings) arise from this chapter again. From suppliers submitted offers must enclose the supply of data which may be used by the Volkswagen group in unlimited measure.The suppliers are informed during the procurement process of the responsible buyer about this demand. With nomination these circumstances are held on in a written arrangement. In this connection is to be pointed out to chapter 2.5.5.3 Copyrights of the Volkswagen group norm VW99000.Tip: To avoid civil disputs after the nomination, the Volkswagen group norms VW99000 are "general demands to the capacity performance within the scope of the component development "und VW01058" drawings; to work through inscriptions" from the supplier carefully and completely.38© Volkswagen, 1446, Konzern-EntwicklungssteuerungB2B portalSupplier's guide for product development2.1.10 Bases to the draught responsibility arrangementThe draught responsibility arrangement (briefly: KVV) divides itself into the end of a principle arrangement KVV and into the individual portion of the supplier in the technical draught of a component. The acknowledgement of the KVV by the supplier is a requirement for the assignment of a new part.The portion of the supplier in the technical draught is expressed about the KV rate and is directed after the developing depth requested by the suppliers. Inclusively is valid: the less constructive default by the Volkswagen group, the higher is the KVV portion. The definition of the KV rate by the designer responsible for component takes place in the early draught phase of a new part development and is a component of the inquiry documents (see chapter 2.1.6 "information specific for development in the inquiry package").Following classifications of the KV rates are valid it:❑ series suppliers (low developing depth):KV rate 10%❑ Standard developer ("middle" developing depth):KV rate 30 - 70%❑Draught developer (high developing depth):KV rate 90%As mentioned above the arrangements with KVV are valid for all new parts, are excluded here: ❑ Raw parts❑ Norm parts❑ Company means❑ Process materialYou find further information about the subject draught responsibility arrangement in the range "information" of the business division "Quality assurance" on the group business platform under following link:© Volkswagen, 1446, Konzern-Entwicklungssteuerung39B2B portalSupplier's guide for product development2.1.11 LION - supplier's part information onlineWith LION (supplier's part information online) it concerns an online application. Their main focus lies on the communication between supplier and the Volkswagen group during the preseries phase and initial phase. LION enables to suppliers to retrieve data specific for component from data banks of the Volkswagen group and to update these data independently.LION offers:❑ Actual, clear and standardised exchange of information betweento the Volkswagen group and his suppliers❑ Less redundant inquiries and with it a lowering of the costs forCommunication and coordination❑ Reduction of the treatment expenditure, by manual data inputthere originates and thereby less input error.LION encloses different modules which are used as a function of the project progress. Duties are assigned for each of the part numbers for which he was nominated automatically to the supplier. Such duties are, e.g.: ❑ Listing of pattern appointments and supplier's contact data(LION module "part appointments" and "contact data")❑ Documentation of the part generation and the part curriculum vitae(LION module "part generation state care")❑ Documentation of Reviews and tool appointment pursuit betweenSuppliers and organisations of the Volkswagen group (LION module "CoRe" - Commitment Reviews) The application "LION" is available after occurred registration by the B2B support on the group business platform and can be called by choice of the following icon:Illustration 29 shows how you can access LION.。
Sagitar_2006_1.6L四缸汽油发动机(BWH)
1.3 检查半自动齿形皮带张紧轮 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
1.4 拆卸和安装气缸盖 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
目录
00 - 技术数据 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
技术数据 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 拆卸发动机 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 在装配架上固定发动机 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1 曲轴 - 装配一览 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
大众通用材料标准版本日期明细清单
158
TL534_01112008_D
159
TL1010标准-1997-05
160
TL52231_01062010_D
161
TL52277_EN_2002-10-01
162
TL52277_en_021992
163
TL52388_Ing_03-2005
164
TL52452 2010
165
TL52452_Ingles-2003
73
GMP[1].PE.008-1998
74
GMW22-2002
75
GMW3029-2000
76
GMW3044-2005
77
GMW3059_2005
78
GMW3205-2000
79
GMW3232-2007
80
GMW3235-2011
81
GMW8081-2005
82
GMW14122Sep2010
83
GMW14444 Material Related Interior Part Performance-2006
TL_527_Englisch-2013
175
TS-INT-001-2004-05
176
TS-INT-001-2012_draft
177
TS-INT-001-2014
178
TS-INT-001_2008_UPDATE-081206
179
TS-INT-002
180
VDA260-1990-08
181
VDA 260-2007-04
197
VW50105_CH_08.2000
198
VW50106_07.2000
VW 10540 汽车零部件供应商代码 2011 07 01
Manufacturer's Codefor Vehicle PartsPrevious issuesVW 10540-1: 1972-10, 1999-06, 2005-06, 2006-06ChangesThe following changes have been made compared with VW 10540-1: 2006-06:–Section 1: links to list of manufacturers' codes and B2B platform updated, and notification ofmanufacturer changed, was: "...notification by letter."ScopeVehicle parts and function groups that are–purchased as ready-to-install parts from suppliers,–partially supplied by suppliers,–taken from current production as original or accessory part or –manufactured in-house as original or accessory partmust be marked with a permanent and easily legible three-character manufacturer's code (alpha‐betical or alphanumerical).Marking with the manufacturer's code is required so that selective damage and quality analysis can be carried out if necessary and so that the manufacturer can always be identified in warranty and product liability cases.Manufacturer's codes are established for all manufacturers and their individual production locations that supply vehicle parts to the Volkswagen Group and its brands, including its subsidiaries/associate companies.1 Group Standard VW 10540-1Issue 2011-07Class. No.:01155Descriptors:manufacturer, code, marking, vehicle part, damage analysis, warrantyVerify that you have the latest issue of the Standard before relying on it.This electronically generated Standard is authentic and valid without signature.The English translation is believed to be accurate. In case of discrepancies, the German version is alone authoritative and controlling.Page 1 of 4Confidential. All rights reserved. No part of this document may be provided to third parties or reproduced without the prior consent of the Standards Department of a Volkswagen Group member.This Standard is available to contracting parties solely via the B2B supplier platform .© Volkswagen Aktiengesellschaft VWNORM-2010-08f-patch1The manufacturer's codes for Volkswagen AG and Audi AG are assigned on request. The codes are sent to the manufacturer electronically via the Group Business Platform or by e-mail.Manufacturer's codes for foreign Group companies are issued separately according to the issuing ranges defined in Volkswagen Standard VW 10540-3. The contacts for assigning manufacturer'sThe obligation for marking of vehicle parts may be omitted in the following cases:–standard parts –semifinished products –parts for which marking is not possible because of space limitations and/or cannot be applied ina legible manner (see DIN 1450 for a definition).For parts which, due to their nature, cannot be marked with the manufacturer's code as per this Standard, alternative forms of marking, e.g. attaching the manufacturer's code by means of labels,must be agreed between the responsible engineering department, the manufacturer, and the de‐partment assigning the manufacturer's code, as must the inclusion of same in the appropriate doc‐uments. Exception: For valve springs, color markings as per Volkswagen Standard VW 10540-7 are assigned to the manufacturer as manufacturer's code.RequirementsParts must be marked immediately once they are newly developed or ordered for the first time. Miss‐ing markings must be applied immediately. The marking requirements acc. to Figure 2 must be com‐plied with. Any markings that do not apply must be deleted in the drawing.The parts must be marked in such a way that durability and legibility of the marking are ensured over the service life of the parts. The marking must be applied to the parts using suitable manufacturing methods, e. g. embossing, etching or electric discharge machining.NOTE 1 Preferably, the marking is to be applied by incorporating it into the manufacturing tool.If possible, the code characters must be half the size of the logo diameter "d1" or the logo height "h" as per VW 10514. However, the font size must never be less than 2 mm.Assemblies (ASSY) that are sold as spare parts must only be marked once by such a code, whereas any individual part of an assembly that is listed individually as a spare part must also be marked by a code.As far as possible, the marking on the part is to be located so that it is visible in installation position.When marking parts that are visible to the customer, agreement on the position of the marking must be reached with the Styling department and the department assigning the manufacturer's code.Typeface as per DIN 1451-4 (medium-spaced lettering) must be used for the marking.Further marking requirements can be obtained from VW 10500.2 Page 2VW 10540-1: 2011-07Marking example (Figure 1) and drawing specifications (Figure 2)Example of a marking on a vehicle part Figure 1Drawing specification for Figure 1 (text macro: VW 01014, NO-E2)Figure 2Legend1Font size of the manufacturer's code on the part = 3 mm 2Standard VW 10540-1; if valve springs are concerned, VW 10540-7 must be specified atthis point33.13.2Page 3VW 10540-1: 2011-07Other applicable documentsThe following documents cited in this Standard are necessary to its application.Some of the cited documents are translations from the German original. The translations of German terms in such documents may differ from those used in this Standard, resulting in terminological inconsistency.Standards whose titles are given in German may be available only in German. Editions in other languages may be available from the institution issuing the standard.VW 01014Engineering Drawings; Drawing Frames and Text Macros VW 10500Company Designation, Marking of Parts; Guidelines for Use VW 10514Logos; Marking of Vehicle Parts VW 10540-3Manufacturer's Code for Vehicle Parts; Issuing Ranges for International Plants Issuing Manufacturer's Codes VW 10540-7Identification of Valve Springs DIN 1450Lettering; legibility DIN 1451-4Typefaces; lineal linear-antiqua; stenciled lettering for engraving and otherprocesses 4 Page 4VW 10540-1: 2011-07。
VW 801 06(元件插接器技术要求)2000英文
Vertragspartner erhalten die Norm nur über die zuständige Beschaffungsabteilung.Confidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior written permission of the Volkswagen Group, EZTN, Standard Department.Parties to a contract can only obtain this standard via the responsible procurement department.VOLKSWAGEN AGF o r m F E 41 -10.99T h e E n g l i s h t r a n s l a t i o n i s b e l i e v e d t o b e a c c u r a t e . I n c a s e Q U E L L E : N O L I S (N o r m v o r A n w e n d u n g a u f A k t u a l i t ät p r üf e n !)Page 2VW 801 06: 2000-082 Requirements2.1 GeneralrequirementsApproval of first supply and changes according to VW 011 55.General requirements according to VW 801 01 apply.Avoidance of hazardous substances according to VW 911 01.2.2 Connector mating forceThe plugging force when assembling the connector housing shall be <100 N. The maximum permissible force is 150 N. This requirement applies independently of the number of terminals. If necessary, sliders or levers shall be used as actuation aids. Forces must not be carried by the contact housing.connection2.3 Push-onThe push-on connectors must be shown and dimensioned on a separate drawing and must be indicated on the component drawing.pins2.4 PlugThe plug pins of the push-on connector must be indicated with the standard part number on the drawing.The standard part drawing must contain the following information:─Plug shape─Material─Dimensions─Surface─Layer thicknessPage 3VW 801 06: 2000-082.4.1 Plug resilience and pull-out strengthPlug resilience according to Table 1:Forces shall not be carried by solder points.Test rate100 mm/minCrimped and push-on connections according to VW 751 73 and VW 603 30Table 1: Connector types and forcesFlat terminal on the deviceWidth x thickness(mm)Possible mating connectorPlug resilience/ pull out strength(N)9.5 x 1.2Flat contact (maxi-power timer)≥ 2007.7 x 0.8Flat contact≥ 1806.3 x 0.8Flat contact≥ 1505.0 x 0.8Flat contact≥ 1505.0 x 0.6Flat contact≥ 704.8 x 0.8Flat contact (standard-power timer)≥ 1202.8 x 0.8Flat contact≥ 802.8 x 0.5Flat contact (junior-power timer)≥ 801.5 x 0.6Flat contact (micro-timer)≥ 551.6 x 0.8Flat contact≥ 550.63 x 0.63Box connector 0.63 mm≥ 50Round connector on the deviceØ (mm)Possible mating connector Plug resilience/pull out strength(N)4.0Round connector 4.0 mm≥ 1502.5Round connector 2.5 mm≥ 801.6Round connector 1.6 mm≥ 401.0Round connector 1.0 mm≥ 40The forces are measured at room temperature2.5 ContactcorrosionTo prevent galvanic corrosion, the same materials (uncoated contacts) or the same surface protection (coated contacts) shall be used in the push-on connection (male/female connector).2.6 Contacts with gold-plated surfacesGold contacts shall be used for:─Signal currents below 3 mA─Open-circuit voltages below 3 mV,By agreement for open-circuit voltages between 3 mV and 1 V─Signal currents below 25 mA and temperatures above 130 °C─Signal currents below 25 mA and increased vibration stressFor special requirements (e.g. safety components), to which the criteria listed in this section do not apply, whether to use gold-plated contacts must be specially decided.Page 4VW 801 06: 2000-08connection2.7 Push-onThe plugs shall be arranged on the housing in rows (single or multiple rows). To extend the current leak path, a plastic socket in a honeycomb shape, for example, shall be selected.The push-on connection is generally on the electric/electronic component. The coding shall not be done by arranging the plug pins, but by the outside contour. The push-on connection is compact and shall not be designed as individual connections.The contacts shall be made solid (not folded), fixed and pressed in or injected. The push-on connection must have a catch for the connector housing (on the cable side).collars2.8 ProtectivePin and protective collars shall be designed as mechanical components. The edges and the sealing area must be free of burrs.plugging2.8.1 ImproperTo avoid improper plugging, the protective collar shall be coded by shape.2.8.2 GuidesThe wall of the plug receptacle must be stable in shape and remain so, even under mechanical and thermal stress.A high enough wall in connection with guide ribs or other aids can prevent damage to the contact elements by accidentally and/or willfully plugging in crooked or in the wrong socket, and sufficiently secure guiding of the connector housing prior to contact is ensured.2.8.3 Protection against mechanical contactDesign measures (e.g., spacing material, height of protective collar) shall prevent the contacts from being bent due to contact (even with counter-coupling).3 ReferencedstandardsVW 011 55Vehicle Supply Parts - General, Approval of First Supply and ChangesVW 60330Crimp ConnectionsVW 75173Flat Terminal ConnectionsVW 801 01Electric and Electronic Components in VehiclesVW 911 01Environmental Standard for Vehicles, Vehicle Parts, Materials, Operating Fluids, Avoidance of Hazardous Substances。
大众汽车电脑编码大全
大众电脑编码大全奥迪A62.8L01）3B0907551BF2.8L V6/5V G01001CODING：0455202）4B0927156AJ AG501V2.8L5V USA3132CODING：0000403）3B0614111ABS/ASR5.3FRONT D00CODING：0003115）4B0959655G Airbag Fronttseite2001CODING:0000435)4B0962258J Central Lock/Alarm D35CODING:0673145?)4B0907357LEDCHTWETTEREGLER D004CODING:0000536)4B0959608Sitzmamnory R1F000CODING:0000056)4C0035186Radio D02CODING:0020766)4B0919283ParkingSystem A6Row D18CODING:0110617)4C0920930A Ch-kOMRIINSTR VDO D12CODING:0016208)4B0820043AF A6-Klimavnllautomat D65coding:00160奥迪A62.4LVIN:VBA24B013014521?15??01)3B0907552AD2.4L V6/5V G0000CODING:0455202)4B0927156AL AG501V2.4L5V RHW2526CODING:0001303)3B0614111ABS/ASR5.3FRONT D00CODING:0003115)4B0959655G Airbag Fronttseite2000CODING:0000435)4B0962258E Zentralverrieg.DWA D34CODING:0468345)4B0951178A(?Unnenmumueberw)D04CODING:0000136)4B0959760A Sitzmemnry D0556)4C0035186Radio D02CODING:00207 66)4B0919283Parkingsystem A6ROW D18CODING:0010617)4C0920930A C5-KOMHI INSTR VDO D09CODING:0006208)4B0820043AF A6-Klimavcllautomat D65CIDING:00160大众奥迪1.8L01）4R0906018CA1.8L R4/5VT0003CODING：0450203）3B0614111ABS/ASR5.3FRONT D00CODING：0002215）4B0959655G Airbag Frongt+Seite2001CODING:0000435)4B0962258J Central lock/Alarm D35CODING:0000156)4C0035186Radio CODING:0020117)4C0920900A C5-KOMRI INSTR VDO D12CODING:0014408)4B0820043H A6-Klimauollautomat D64CODING:00140宝来 1.8L01）06A906032LD1.8L R4/5VT0001CODING：0453002）01M927733LL AG4Getribe01M4956coding:0000003)1c0907379K ASR PRONT MK600103CODING:002150515)1C09096012K Airbag VW510004CODING:1287546)1C0959799C18Komfortger BF HLO0003CODING:0025956)3BD035186Radio5GD0001CODING:0040317)1J5920826A KOMRITWEGFAHRSP VDO V04CODING:0512208)3B1907044C CLIMATRONIC C2.0.0CODING:0110019)6N0909901Gateway k<->CAN0000CODING:000062002上海大众B5V62.8L自动波全车电脑版本号地址码:01-发动机零件号码:3B0907551CP 2.8L V6/5V G0001Coding号:08051维修站号码:00000地址码:02-自动波零件号码:8D0927156DJ AG501V2.8l5V RdW1111Coding号:00113维修站号码:66187地址码:03-ABS/ESP零件号码:1J0907379Q ABS/EDS20IE CAN0001Coding号:13604维修站号码:00000地址码:08-空调系统冷气/暖气零件号码:3B1907044J CLIMATRONIC B5GP0003Coding号:17000维修站号码:66187地址码:15-Airbags气囊系统零件号码:1C0909605B XJ AIRBAG VW510402*XJ为软件索引号Coding号:22602维修站号码:66187地址码:17-仪表与IMMO址码:36-司机侧座椅调节零件号码:3B1959760D Sitzverstellung0101Coding号:0000000维修站号码:00000地址码:55-射灯控制零件号码:4B0907357LEUCHTWEITEREGLER D004Coding号:00015维修站号码:66187宝来汽车电脑器件型号01-发动机：06A906032EQ 1.6L5V MQ2004680CODING:00031WSC:00000VIN：LFVBA11JX23049994IMMO_SN：VWZ7Z0B642230915-安全气囊：1C09096012K AIRBAG VW510006CODING:12875WSC:1031503-ABS电脑：1C0907379L0101ABS FRON7MK60CODING:0001025WSC:0000025-IMMOBILZER电子防盗：Bitte Adresse17engeben46-中控与适系统：1C09597992M Komfortgerât HLO00001CODING:00259WSC:000001C1959801A1M TJrsteuer FS KLO000917-组合仪表（防盗）电脑版本：1J5920806b komb1+wegfarlrsp vdo v02coding:01102wsc:00000VIN：LFVBA11JX23049994IMMO_SN：VWZ7Z0B6422309 19-网关：6N0909901Gateway k<->can0001coding:00006wsc:00000AUDI A41.808-空调系统4A0820043DCODING000400006000061桑塔纳2000时代骄子安全气囊1C09096012N AIRBAG VW510008CODING:12878WSC:01234C5发动机4D0907551AH CODING号码01-ENGINE发动机系统4D0907551AH 2.8L V6/5V MOTR HS D04Coding:06201WSC06335宝来汽车电脑版本号01-发动机：06A906032JB 1.6L5V ATAG44629CODING:0003302-自动变速箱零件号码01M927733KK组件AG4GETRIEBE01M4989Coding号0000017-组合仪表（防盗）电脑版本：1J5920806C komb1+wegfaHrsp vdo v02coding:01102wsc:0000046-舒适系统零件号码1C0959799组件1M KOMFORTGERâtHLO0002Coding号00259斯科达法比亚气囊电脑VAG NUMBER Index CODING=====================1J0909603AS AIRBAG167231J0909603AT AIRBAG167242002Jetta1.8T电脑版本号01--发动机:06A906032HF 1.8L R4/5VT G0004Coding:07550WSC1362202--自动波09A927750T AG5Getriebe09A019303--ABS:1C0907379K ASR FRONT MK600103Coding:0018945WSC0002817--仪表/IMMO:1J5920926AX KOMBI+WEGFAHRSP VDO V11Coding:07204WSC2258519--网关6N0909901Gateway K<->CAN0001Coding:00006WSC2258546--中控与舒适系统1C0959799C1H Komfortger醫HLO0003Coding:00257WSC 0002856--收放机3B7035180Radio NP20055Coding:00031WSC00028美规原装奥迪A6.2.8L手动自动两用波箱电脑型号发动机电脑:4D0907551AH2.8L V6/5V MOTRAT D02CODING:06252波箱电脑:4B09271156G AG501V2.8L5V USA8509CODING:00001ABS电脑:8E0614111M ABS/EDS5.3OUATTRO D31CODING:06169仪表电脑:4B0919930RX C5-KOMBIINSTR VDO D15CODING:07262空调电脑:4B0820043G A6-KLIMAVOLL AUTOMAT:D61CODING:00160中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30CODING:15885宝来1.6L A/T发动机的CODING：00033ABS：0001025A/T：00000仪表：01102音响：00001舒适性系统：00259捷达：1.6l A/T发动机的CODING：04030A/T：03604SRS：00065防盗：09600捷达都市先锋发动机：04003A/T：00000ABS：03604一汽新A6address01Protocol:KW1281Controller:3B0907551CKComponent:2.8L V6/5V0002Coding:08502Shop#:WSC00000Address03Protocol:KW1281Controller:3B0614111Component:ABS/ASR5.3FRONT D00Coding:00032Shop#:WSC00000Address17Protocol:KW1281Controller:4C0920930BComponent:C5-KOMBIINSTR.VDO D12Coding:00162Shop#:WSC0000001-发动机4B0906018CL 1.8L R4/5VT G0001Coding:16551WSC00008WVWPD63B61P269969VWZ7Z0A355186302-自动波4B0927156DA AG501V1.8l5VT RdW1313Coding:00013WSC0000803-ABS3B0614111ABS/ASR5.3FRONT D00Coding:00021WSC0002817-仪表&IMMO3B0920925B KOMBI+WEGFAHRSP VDO V13Coding:07235WSC00008WVWPD63B61P269969VWZ7Z0A3551863 46-中控与舒适系统1C0959799C08Komfortger醫HLO0001Coding:00257WSC00008A6.2.8波箱控制单元编码4B0927156G AG501V 2.8L5V USA8509编码号是00001原装奥迪A6电脑型号美规原装奥迪A6.2.8L手动自动两用波箱电脑型号发动机电脑:4D0907551AH2.8L V6/5V MOTRAT D02CODING:06252波箱电脑:4B09271156G AG501V2.8L5V USA8509CODING:00001ABS电脑:8E0614111M ABS/EDS5.3OUATTRO D31CODING:06169仪表电脑:4B0919930RX C5-KOMBIINSTR VDO D15CODING:07262空调电脑:4B0820043G A6-KLIMAVOLL AUTOMAT:D61CODING:00160中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30CODING:15885菠萝转向助力电脑编号6Q0423156Q LenkhilfeTRW V250Coding:10140Code:WSC12345polo波罗 1.4L MT全车电脑版本号01-ENGINE//01-10-d188(含EPC电子油门控制)036906034DM MARELLI4MV4837Coding:00071WSC1234503-ABS6Q0907379L ABS FRONT MK600101Coding:0001097WSC1234508-空调6Q0820045Klimaanlage X084015-AIRBAG6Q0909601E07AIRBAG VW50007Coding:12343WSC1234517-仪表/IMMO6Q0920800KOMBI+WEGFAHRSP VDO V16Coding:00141WSC57952LSVFA49J732012842VWZ7Z0C683158519-网关6N090990114GATEWAY CAN1S33Coding:00014WSC1234546-J393(T23+T12C)舒适系统6Q0959433G4W Komfortgera0002Coding:00064WSC12345(coding为00264可多控制后面2个门)J386(T12d+T8h+t12e)左前门:6Q2959802A4W Tusteuer.FS KLO0001J387(T8i+T6p+T12f)右前门:6Q2959801A4W Tusteuer.BF KLO000156-收放机6QD035152Radio5GD0001Coding:00001WSC1234509-电源与继电器管理6Q1937049C00BN-SG.1S33Coding:25612Code:WSC1234544-转向助力6Q0423156Q LenkhilfeTRW V250Coding:10140Code:WSC1234503-ABS6Q0907379L ABS FRONT MK600101Coding:0001097WSC12345上海大众菠萝全车电脑版本号156Q0909601E07AIRBAG VW50007CODING:12343176Q0920800&...........VDO V13CODING:00141196N090990114CE CANcoding:00014096Q1937049C00.BN-SG1S32coding:25612010********DM m......4MZ4449coding:000710106A906032JCME7.5.104686coding:00071036Q0907379E0103ABS MK60coding:000109799新秀发动机CODING：06169ABS：01901SRS：12878捷达发动机CODING：00001ABS：01901SRS：12336点子防盗：10400红旗发动机CODING：00000-00003ABS：06272点子防盗：0960094奥迪V6防盗电脑版本：4A0953234，8D0953234，可互用帕萨特B5电脑编号：发动机：3B0907551CT CODING：08551ABS：3Q0614517B CODING：04297。
马勒滤清器产品表对照表
LX 3184 KL 735 KL 755 KL 756 KL 759 LX 2717 LA 282 LA 519 LA 521 LA 522 LA 621 LA 622 LA 623 LA 708 LAK 519 LAK 522 LAK 621 LAK 622 LAK 708
新朗逸空滤芯 朗逸燃滤 POLO带阀燃滤(3Bar) POLO带阀燃滤(4Bar) 明锐带阀燃滤 迈腾空滤芯 捷达灰滤芯 B5单效空调滤芯 宝来单效空调滤芯 波罗单效空调滤芯 速腾单效空调滤芯 高尔夫单效空调滤芯 高尔单效空调滤芯 新宝来单效空调滤芯 B5双效空调滤芯 波罗双效空调滤芯 速腾空调滤芯 高尔夫双效空调滤芯 新宝来双效空调滤芯
FLAK917T FLX1253T FLX793T FLX819T FLX3312T FLX1275T FOC485WT FOX690DT FOX565DT FOX196/3DT FOX160DT FOX350/4DT
LAK 917 LX 1253 LX793 LX 819 LX 3312 LX 1275 OC 485 OX 690D ECO OX 565D ECO
大众（VW）系列产品目录
存货编码 2010804WT FOC485WT 201003WT 2010846 2010849 201050WT 2010857 FOC1022T FOC1196T FOX128/1DT FOX254D4T FOX396DT FOX398DT 202003WT 202004WT 202005WT 202014WT 202087WT FKL502T 203163WT 203165WT 203167WT 203169WT 203211WT FLX1897T FLX1898T 203217WT 203218WT FLX1900T 203219WT 203220WT FLX1899T FLX2024/1T 马勒型号 OC 527 OC 485 OC 489 OC 488 OC 497 OC 515 OC 593/4 OC 1022 OC 1196 存货名称 068机滤 奥迪V6机滤 034机滤 056机滤 06A机滤 POLO机滤 03C机滤 06J机滤 新桑塔纳机滤 原件号或参考号 068 115 561B 078 115 561J, W 930/21 034 115 561A 056 115 561G 06A 115 561B, 06A 115 561D 06A 115 561E 030 115 561AB 03C 115 561E, 03C 115 561B, 03C 115 403F 06J 115 403 C, 06J 115 561B, 06H 115 403, W719/45 04E 115 561A 99610702054, 99610702055, 99610722552, 99610722553, 99610722560 94810722200 074 115 562, 038 115 466 03C 115 562, 03C 115 577 A 191 201 511A 6Q0 201 511 1H0 201 511A, 330 298 511A 1H0 201 511A 1J0 201 511A 1GD 127 401 056 129 620 027 129 620.1 330 129 620 058 133 843 036 198 620 03C 129 620F, C 4287/3 377 129 620 191 129 620, 859 129 620 1GD 129 620 1GD 129 620A 1J0 129 620 1J0 129 620A, 180 129 620, A-399 1K0 129 620C, 1TD 129 620, 1KD 129 620D, 1F0 129 620 7P0 129 620A, 95811013010 适用车型/发动机 帕萨特1.8T, 奥迪 A4(V6), A6(V6), Passat(V6) 捷达,桑塔纳(2000、2VQS和3000) 桑塔纳(化油器)和桑塔纳99新秀 帕萨特1.8, 宝来, 捷达王, 奥迪, 途安, 速腾 Polo 1.4 1.4T:速腾,迈腾,新宝来,高尔夫A6; 1.6:速腾,新宝来,高 尔夫; 1.4:Polo,晶锐(Fabia)；1.6:Polo,朗逸,晶锐，明 锐; 1.4T:朗逸,明锐,昊锐 迈腾1.8T/2.0T, 途观1.8T/2.0T, 昊锐1.8T/2.0T, 明锐 1.8T, 速腾1.8T, A4L 2.0, Q5 2.0 EA211: 新桑塔纳1.4/1.6, 新捷达1.4/1.6 保时捷911 3.4/3.6/3.6T/3.8, 保时捷卡宴4.5T, 保时 进口件 捷博克斯特(BOXSTER) 2.7/3.2/3.4 保时捷911 3.4/3.6/3.8, 保时捷卡宴4.8, 保时捷帕纳美 进口件 拉(PANAMERA) 3.6/4.8/4.8T 捷达柴油车、宝来柴油车 Polo劲情劲取 桑塔纳(化油器), 捷达(化油器) POLO老款 桑塔纳(2000、2VQS和3000), 帕萨特, 奥迪A4, A6 捷达电喷 宝来, 奥迪 捷达柴油车 桑塔纳(化油器) 桑塔纳2000 桑塔纳2VQS（时代超人） 帕萨特B5, 奥迪A6 1.8, 1.8T, 2.4, 2.8 Polo 1.4 Polo劲情劲取 上海大众高尔 捷达普通型（化油器） 捷达王,捷达电喷（2V/5V) 捷达柴油车 宝来1.8, 高尔夫 宝来1.6, 1.8T, 宝来柴油车, 朗逸 1.4T, 都市高尔夫1.4 途安, 速腾, 开迪, 迈腾 1.4T 途锐3.0/3.6/4.2, 保时捷卡宴(Cayenne) 3.0/3.6/4.8 进口件 备注
vw 10560
Previous Issues First issue: 1980-04 Last change: 1991-12
1
Scope
Vehicle parts, which must bear the date as proof of the time of manufacture, to satisfy official regulations, to be able to sort parts according to their date of manufacture
4.1
Single-Character Type.......................................................................................................4
4.2
Two-Character Type..........................................................................................................4
Changes The following changes have been made as compared to the December 1991 issue:
- Paragraph 6: Text macro NO-E2 updated, the manual creation of drawings was ceased, for this reason there are no longer any self-adhesive labels either.
爱普生 零件编号 T10S200 安全数据表
Safety Data Sheet1.IDENTIFICATIONProduct identifierMixture identification:Trade name: Ink, T10S200Recommended use of the chemical and restrictions on useRecommended use:Ink for inkjet printingDetails of the supplier of the safety data sheetCompany:Epson America, Inc.3131 Katella Ave.Los Alamitos, CA 90720United StatesTelephone : 562.276.1369Emergency phone numberTelephone : 562.276.13692.HAZARD(S) IDENTIFICATIONClassification of the chemicalThe product is not classified as dangerous according to OSHA Hazard CommunicationStandard (29 CFR 1910.1200).Label elementsThe product is not classified as dangerous according to OSHA Hazard CommunicationStandard (29 CFR 1910.1200).Hazard pictograms:NoneHazard statements:NonePrecautionary statements:NoneSpecial Provisions:NoneHazards not otherwise classified identified during the classification process:NoneAdditional classification informationNFPA rating:HMIS rating:POSITION/INFORMATION ON INGREDIENTSSubstancesNoMixturesHazardous components within the meaning of 29 CFR 1910.1200 and related classification:Qty Name Ident. Number Classification50% ~ 65% Water CAS: 7732-18-5EC: 231-791-2The product is not classified asdangerous according to OSHAHazard Communication Standard(29 CFR 1910.1200).10% ~ 12.5 % Glycerol CAS: 56-81-5EC: 200-289-5The product is not classified asdangerous according to OSHAHazard Communication Standard(29 CFR 1910.1200).1% ~ 3% Triethanolamine CAS: 102-71-6EC: 203-049-8The product is not classified asdangerous according to OSHAHazard Communication Standard(29 CFR 1910.1200).1% ~ 3% 2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE;triethylene glycolmonobutyl etherIndexnumber:603-183-00-0CAS: 143-22-6EC: 205-592-6REACH No.: 01-2119475107-38A.3/1 Eye Dam. 1 H318Specific Concentration Limits:20% <= C < 30%: Eye Irrit. 2A H319C >= 30%: Eye Dam. 1 H3184. FIRST-AID MEASURESDescription of necessary measuresIn case of skin contact:Wash with plenty of water and soap.In case of eyes contact:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of Ingestion:Do not under any circumstances induce vomiting. OBTAIN A MEDICAL EXAMINATIONIMMEDIATELY.In case of Inhalation:Remove casualty to fresh air and keep warm and at rest.Most important symptoms/effects, acute and delayedNoneIndication of immediate medical attention and special treatment neededTreatment:None5. FIRE-FIGHTING MEASURESSuitable extinguishing media:Water.Carbon dioxide (CO2).Unsuitable extinguishing media:None in particular.Specific hazards arising from the chemicalDo not inhale explosion and combustion gases.Burning produces heavy smoke.Hazardous combustion products:NoneExplosive properties: No data availableOxidizing properties: No data availableSpecial protective equipment and precautions for fire-fightersUse suitable breathing apparatus .Collect contaminated fire extinguishing water separately. This must not be discharged intodrains.Move undamaged containers from immediate hazard area if it can be done safely.6. ACCIDENTAL RELEASE MEASURESPersonal precautions, protective equipment, and emergency proceduresWear personal protection equipment.Remove persons to safety.See protective measures under point 7 and 8.Methods and materials for containment and cleaning upWash with plenty of water.7. HANDLING AND STORAGEPrecautions for safe handlingAvoid contact with skin and eyes, inhalation of vapours and mists.Do not use on extensive surface areas in premises where there are occupants.Do not eat or drink while working.See also section 8 for recommended protective equipment.Conditions for safe storage, including any incompatibilitiesKeep away from food, drink and feed.Incompatible materials:None in particular.Instructions as regards storage premises:Adequately ventilated premises.Storage temperature:Store at ambient temperature.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONControl parametersGlycerol - CAS: 56-81-5- OEL Type: OSHA - TWA: 5 mg/m3 - Notes: Respirable dust- OEL Type: OSHA - TWA: 15 mg/m3 - Notes: Total dustTriethanolamine - CAS: 102-71-6- OEL Type: ACGIH - TWA(8h): 5 mg/m3DNEL Exposure Limit ValuesNo data availablePNEC Exposure Limit Values2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE; triethylene glycol monobutyl ether - CAS:143-22-6Target: Fresh Water - Value: 1.5 mg/lTarget: Freshwater sediments - Value: 5.77 mg/kgTarget: Marine water - Value: 0.15 mg/lTarget: Marine water sediments - Value: 0.13 mg/kgTarget: Microorganisms in sewage treatments - Value: 200 mg/lAppropriate engineering controls:NoneIndividual protection measuresEye protection:Use personal protective equipment as required.Protection for skin:Use personal protective equipment as required.Protection for hands:Use personal protective equipment as required.Respiratory protection:Use personal protective equipment as required.Thermal Hazards:None9. PHYSICAL AND CHEMICAL PROPERTIESAppearance and colour: Cyan LiquidOdour: SlightlyOdour threshold: No data availablepH: 9.5 ~ 10.5 at 20 °CMelting point / freezing point: No data availableInitial boiling point and boiling range: No data availableFlash point: Does not flash.Evaporation rate: No data availableSolid/gas flammability: No data availableUpper/lower flammability or explosive limits: No data availableVapour pressure: No data availableVapour density: No data availableRelative density: No data availableSolubility in oil: No data availablePartition coefficient (n-octanol/water): No data availableAuto-ignition temperature: No data availableDecomposition temperature: No data availableViscosity: < 5 mPa·s at 20 °CMiscibility: No data availableFat Solubility: No data availableConductivity: No data available10. STABILITY AND REACTIVITYReactivityStable under normal conditionsChemical stabilityStable under normal conditionsPossibility of hazardous reactionsNoneConditions to avoidStable under normal conditions.Incompatible materialsNone in particular.Hazardous decomposition productsNone.11. TOXICOLOGICAL INFORMATIONToxicological information of the product:f) carcinogenicity:Does not contain carcinogens (Ref. 1)g) reproductive toxicity:Does not contain reproductive toxicity and developmental toxic substances (Ref. 2) Toxicological information of the main substances found in the product:Glycerol - CAS: 56-81-5a) acute toxicity:Test: LD50 - Route: Oral - Species: Guinea pig = 7750 mg/kg - Source: Journal ofIndustrial Hygiene and Toxicology. Vol. 23, Pg. 259, 1941Test: LDLo - Route: Oral - Species: Human = 1428 mg/kg - Source: "Toxicology ofDrugs and Chemicals," Deichmann, W.B., New York, Academic Press, Inc., 1969Vol. -,Pg. 288, 1969.Triethanolamine - CAS: 102-71-6a) acute toxicity:Test: LD50 - Route: Oral - Species: Guinea pig = 2200 mg/kg - Source: "ToxicometricParameters of Industrial Toxic Chemicals Under Single Exposure," Izmerov, N.F., et al.,Moscow, Centre of International Projects, GKNT, 1982Vol. -, Pg. 114, 1982.Test: LD50 - Route: Oral - Species: Mouse = 5846 mg/kg - Source: Science Reports ofthe Research Institutes, Tohoku University, Series C: Medicine. Vol. 36(1-4), Pg. 10,1989.2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE; triethylene glycol monobutyl ether - CAS:143-22-6a) acute toxicity:Test: LD50 - Route: Dermal - Species: Rabbit = 3.54 ml/kg - Source: AmericanIndustrial Hygiene Association Journal. Vol. 23, Pg. 95, 1962.Test: LD50 - Route: Oral - Species: Rat = 5300 mg/kg - Source: Office of ToxicSubstances Report. Vol. OTS,Substance(s) listed on the NTP report on Carcinogens:None.Substance(s) listed on the IARC Monographs:Triethanolamine - Group 3.Substance(s) listed as OSHA Carcinogen(s):None.Substance(s) listed as NIOSH Carcinogen(s):None.12. ECOLOGICAL INFORMATIONEcotoxicityAdopt good working practices, so that the product is not released into the environment.Toxicological information of the product:No data availableToxicological information of the main substances found in the product:No data availablePersistence and degradabilityNo data availableBioaccumulative potentialNo data availableMobility in soilNo data availableOther adverse effectsNone13. DISPOSAL CONSIDERATIONSWaste treatment and disposal methodsRecover if possible. In so doing, comply with the local and national regulations currently inforce.14. TRANSPORT INFORMATIONUN numberNot classified as dangerous in the meaning of transport regulations.UN proper shipping nameNo data availableTransport hazard class(es)No data availablePacking groupNo data availableEnvironmental hazardsNo data availableTransport in bulk (according to Annex II of MARPOL 73/78 and the IBC Code)No data availableSpecial precautionsNo data available15. REGULATORY INFORMATIONUSA - Federal regulationsTSCA - Toxic Substances Control ActTSCA inventory: all the components are listed on the TSCA inventory.TSCA listed substances:None.SARA - Superfund Amendments and Reauthorization ActSection 302 – Extremely Hazardous Substances: no substances listed.Section 304 – Hazardous substances: no substances listed.Section 313 – Toxic chemical list: 2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE;triethylene glycol monobutyl ether.CERCLA - Comprehensive Environmental Response, Compensation, and Liability ActSubstance(s) listed under CERCLA: 2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE;triethylene glycol monobutyl ether.CAA - Clean Air ActCAA listed substances:Glycerol is listed in CAA Section 1112-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE; triethylene glycol monobutyl ether islisted in CAA Section 112, Section 112(b) - HON.CWA - Clean Water ActCWA listed substances:None.USA - State specific regulationsCalifornia Proposition 65Substance(s) listed under California Proposition 65:None.Massachusetts Right to knowSubstance(s) listed under Massachusetts Right to know:No substances listed.New Jersey Right to knowSubstance(s) listed under New Jersey Right to know:2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE; triethylene glycol monobutyl ether.Pennsylvania Right to knowSubstance(s) listed under Pennsylvania Right to know:2-[2-(2-butoxyethoxy)ethoxy]ethanol; TEGBE; triethylene glycol monobutyl ether. 16. OTHER INFORMATIONFull text of phrases referred to in Section 3:H318 Causes serious eye damage.H319 Causes serious eye irritation.Safety Data Sheet dated March 29, 2022, Revision: 1.0Main bibliographic sources:Ref. 1 ·Journal of Occupational Health (JOH) (Japan Society of Occupational Health (JSOH)) ·TLVs and BEIs (ACGIH: American Conference of Governmental Industrial Hygienists)·IRIS Carcinogenic Assessment (IRIS: Integrated Risk Information System of US EPA)·Annex VI of REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENTAND OF THE COUNCIL of 16 December 2008 on classification, labelling andpackaging of substances and mixtures, amending and repealing Directives 67/548/EECand 1999/45/EC, and amending Regulation (EC) No 1907/2006·MAK und BAT Werte Liste (DFG: German Research Foundation)·TRGS 905, Verzeichnis krebserzeugender, keimzell mutagener oderreproduktionstoxischer Stoffe (AGS: Committee on Hazardous Substances, Germany) Ref. 2 ·Annex VI of REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling andpackaging of substances and mixtures, amending and repealing Directives 67/548/EECand 1999/45/EC, and amending Regulation (EC) No 1907/2006·TRGS 905, Verzeichnis krebserzeugender, keimzell mutagener oderreproduktionstoxischer Stoffe (AGS: Committee on Hazardous Substances, Germany) Disclaimer:The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and constitutes no guarantee of particular quality. The information relates only to the specific material and may not be valid for such material used in combination with any other material or in any process.This Safety Data Sheet cancels and replaces any preceding release.ADR: European Agreement concerning the International Carriage ofDangerous Goods by Road.CAS: Chemical Abstracts Service (division of the American ChemicalSociety).CLP: Classification, Labeling, Packaging.DNEL: Derived No Effect Level.EINECS: European Inventory of Existing Commercial Chemical Substances.GHS: Globally Harmonized System of Classification and Labeling ofChemicals.HMIS: Hazardous Materials Identification SystemIARC: International Agency for Research on CancerIATA: International Air Transport Association.IATA-DGR: Dangerous Goods Regulation by the "International Air TransportAssociation" (IATA).ICAO: International Civil Aviation Organization.ICAO-TI: Technical Instructions by the "International Civil Aviation Organization"(ICAO).IMDG: International Maritime Code for Dangerous Goods.INCI: International Nomenclature of Cosmetic Ingredients.KSt: Explosion coefficient.LC50: Lethal concentration, for 50 percent of test population.LD50: Lethal dose, for 50 percent of test population.LTE: Long-term exposure.NFPA: National Fire Protection AssociationNIOSH: National Institute for Occupational Safety and HealthNTP: National Toxicology ProgramOSHA: Occupational Safety and Health AdministrationPNEC: Predicted No Effect Concentration.RID: Regulation Concerning the International Transport of Dangerous Goodsby Rail.STE: Short-term exposure.STEL: Short Term Exposure limit.STOT: Specific Target Organ Toxicity.TLV: Threshold Limiting Value.TWATLV: Threshold Limit Value for the Time Weighted Average 8 hour day.(ACGIH Standard).。
美能达复印机故障代码
故障码清除法:清除曝光灯故障码(C04××)主板PWB-A上的开关S1清除定影故障码(C05××)主板PWB-A上的开关S1清除其它故障打开/关闭前门清除原稿尺寸检测故障关闭/打开电源开关；打开/关闭前门主板PWB-A上的复位点(PJ2)将PJ2上的两点连接打开电源,清除用关闭/打开电源开关仍不能清除的故障.主板PWB-A上的接地点TP1(GND)主板PWB-A上的内存清除点TP2(MEMORY)将MEMORY点与GND点连接打开电源,清除内存全部数据,返回到缺省值.主板PWB-A上的总清除点TP3(TOTAL)在电源开关ON条件下将TOTAL点与GND点连接超过1秒,清除电子计数器(不包括I/U计数器)C00表示：驱除系统C0000主电机ON故障主电机ON信号(PJ11A-14A)="0"后1秒,主电机锁住LOCK信号(PJ11A-13A)保持"H"达1.5秒C0001主电机异常ON主电机ON信号="1"后1秒,主电机锁住LOCK信号保持"L"达1.5秒C0010OPC鼓电机ON故障OPC鼓电机电机ON信号(PJ11A-12A)="0"后,鼓电机锁住信号(PJ11A-11A)保持"1"达1.0秒C0011OPC鼓电机异常ON OPC鼓电机电机ON信号="+24V"(电机OFF)后,鼓电机锁住信号保持"0"达5秒C004C光学冷却风扇ON故障光学冷却风扇(PJ20A-1)半速12V/全速24V故障C0070加粉电机M8 ON故障加粉电机ON信号(PJ5A-6)="0"后粉瓶原位传感器PC112输出信号(PJ17-2B)5秒内未变"H",变"H"后超过10秒仍未变"L",C0071加粉电机M8异常ON加粉电机ON信号="1"后2秒,粉瓶原位传感器PC112输出信号未变"L"注:每个复印循环检测粉浓度,取样TD传感器输出16次其中8次未达到目标值输出加粉信号,每个加粉信号加粉电机M8转1圈（5秒）加粉0.3～0.6克C04表示：曝光灯C0400曝光灯LA1 ON故障曝光灯LA1,ON(PJ14A-3)="0"和扫描开始后图象前沿信号(BASE)变低后,AE传感器输出电压(PJ9A-3)未达到4.3VC0410曝光灯LA1异常ON扫描原位传感器变低(原位),AE传感器输出电压≥3.9V达0.6秒扫描原位传感器保持高AE传感器输出电压≤3.9V达0.6秒C05表示：定影单元C0500定影辊予热故障电源开关S1,ON或打开/关闭前门上辊定影温度20秒未达到50度;达到50度,20秒未达到900度;达到50度20秒未达到150度;达到150度15秒未达到预热完成190度;离开节电模式后120秒未达到190度C0510定影辊温度变低予热完成后上辊(热敏电阻TH检测)温度降低到135度以下达1秒;节电时温度降低到80度以下达1秒C0520定影辊影温度过高予热完成后上辊(热敏电阻TH检测)温度超过230度以上达5秒C06表示：光学部分C0600扫描电机故障当电源ON后20秒,扫描灯架不在原位,原位传感器PJ17A-8B PC81未从高变低;扫描灯架由原位前进或返回扫描时,原位传感器PC81不能从低到高或从高到低C0610镜头移动故障镜头移动电机M6 ON(PJ16A-1B)后15秒,镜头原位传感器PC90(PJ22A-8)不能从高到低C0620第4反光镜移动故障第4反光镜移动电机M7 ON(PJ16A-2B)后3秒,第4反光镜原位传感器PC86(PJ2A-5)不能从低到高;M7 ON(PJ16A-2B)后10秒,不能从高到低不能从低到高C0F表示：传感器故障C0F10AE传感器输出故障AE传感器输出(PJ9A-3)故障C0F30自动墨粉浓度传感器(ATDC)当M1仍旧激励时,自动墨粉浓度传感器(ATDC)PJ10A-3输出电压保持在≤0.4V或≥4.6V连续达2秒E1TD传感器载体调整时未达到目标值E2新显影器(I/U单元)TD传感器调整时I/U保险丝(PJ11A-8)F4未烧断 (F4烧断"0")C0F02原稿尺寸检测板UN2原稿尺寸传感器故障C0FE2原稿尺寸传感器2故障PC113有故障C0FE4原稿尺寸传感器3故障PC115有故障C0FE6原稿尺寸传感器2,3故障PC113有故障PC115有故障C0FE8原稿尺寸传感器4故障PC114有故障C0FEA原稿尺寸传感器2,4故障PC113有故障PC114有故障C2FEC原稿尺寸传感器3,4故障PC115有故障PC114有故障C4FEE原稿尺寸传感器2,3,4故障PC113有故障PC115有故障PC114有故障C0FF0原稿尺寸传感器5故障PC116有故障C0FF2原稿尺寸传感器2,5故障PC113有故障PC116有故障C0FF4原稿尺寸传感器3,5故障PC115有故障PC116有故障C0FF6原稿尺寸传感器2,3,5故障PC113有故障PC115有故障PC116有故障C0FF8原稿尺寸传感器4,5故障PC114有故障PC116有故障C0FFA原稿尺寸传感器2,4,5故障PC113有故障PC114有故障PC116有故障C2FFC原稿尺寸传感器3,4,5故障PC115有故障PC114有故障PC116有故障C4FFE原稿尺寸传感器2,3,4,5故障PC113有故障PC115有故障PC114有故障PC116有故障C09表示：纸路复印机选购件:2×500张双纸盘工作台 PF-206仅2030机C0900第3纸盘向上移动故障第3纸盘提升电机M24 PJ10A-3开始正向旋转后10秒,第3纸盘上限传感器PC19 PJ8A-12B未遮光C0904第3纸盘升/降电机M24故障或,第3纸盘提升电机M24开始正向旋转第3纸盘提升电机脉冲传感器PC27检测到120脉冲后第3纸盘上限传感器PC19未遮光C0950第4纸盘向上移动故障第4纸盘提升电机M25 PJ10A-1开始正向旋转后10秒第4纸盘上限传感器PC23 PJ9A-2未遮光C0954第4纸盘升/降电机M25故障或,第4纸盘提升电机M25开始正向旋转,第4纸盘提升电机脉冲传感器PC28检测到120脉冲后第4纸盘上限传感器PC28未遮光复印机选购件:2×1.250张串级纸盘工作台PF-112仅2030机C0990主盘向上移动故障主(第3)纸盘提升电机M26 PJ10A-1开始提升后10秒纸盘上限传感器PC19 PJ8A-12B未遮光或,主(第3)纸盘提升电机M26开始提升纸盘无纸传感器PC20 PJ9A-2遮光后提升电机脉冲传感器PC5 PJ9A-5检测到n个脉冲后,纸盘上限传感器PC19 PJ8A-12B未遮光C0991主盘向下移动故障主(第3)纸盘提升电机M26开始下降,纸盘提升电机脉冲传感器PC5 PJ9A-5检测到n个脉冲后纸盘上限传感器PC19 PJ8A-12B仍旧遮光C0992主向下移动故障主(第3)纸盘提升电机M26开始下降后或,纸盘提升电机脉冲传感器PC5 PJ9A-5检测到n个脉冲后纸盘下限位置传感器PC35未遮光主(第3)纸盘提升电机M26开始下降后纸盘在低位传感器PC2 PJ3A-3遮光后纸盘提升电机脉冲传感器PC5 PJ9A-5检测到n个脉冲后纸盘下限位置传感器PC35未遮光C0993主盘向上移动故障主(第3)纸盘提升电机M26开始提升后,尽管纸盘提升电机脉冲传感器PC5检测到脉冲,纸盘下限位置传感器PC35光仍旧未透过(L)主(第3)纸盘提升电机M26开始提升后,尽管纸盘下限位置传感器PC35光未已透过(H),提升电机脉冲传感器PC5 PJ9A-5检测到n个脉冲后纸盘下限位置传感器PC35未遮光C0994主盘升/降电机M26故障不管主(第3)纸盘升/降电机M26提升或下降纸盘提升电机脉冲传感器PC5检测不到脉冲C0996第3纸盘锁住释放故障第3纸盘锁住电磁铁SL41 PJ6A-2接通3次,纸盘未释放C0998移动纸盘纸输送故障移动纸盘纸输送电机M27开始输送纸之后移动纸盘返回位置传感器PC4 PJ3A-5未检测到n个脉冲或纸输送电机M27开始输送纸之后尽管纸输送电机M27脉冲传感器PC6 PJ9A-12检测到脉冲,纸盘返回位置传感器PC4未检测到n个脉冲.字母C:N=1,A4C:N=2C0999移动纸盘返回故障移动纸盘纸输送电机M27开始返回之后尽管纸输送电机M27脉冲传感器PC6 PJ9A-12检测到脉冲,移动纸盘返回位置传感器PC4未检测到脉冲C099A移动纸盘返回故障移动纸盘纸输送电机M27开始返回之后尽管电机M27脉冲传感器PC6 PJ9A-12检测到脉冲,纸盘原稿传感器PC3 PJ3A-4未遮光C099B移动纸盘纸输送故障移动纸盘纸输送电机M27开始输送纸之后尽管电机M27脉冲传感器PC6 PJ9A-12检测到脉冲,纸盘原稿传感器PC3 PJ3A-4未检测到脉冲C099C移动纸盘纸输送故障不管移动纸盘移动电机M27输送纸或返回,电机脉冲传感器PC6检测不到脉冲C099E移动纸盘移动门回缩故障移动纸盘移动门电机M28使门回缩时,移动纸盘移动门位置传感器PC34 PJ3A-7未遮光C099F移动纸盘移动门前进故障移动纸盘移动门电机M28使门前进时,移动纸盘移动门位置传感器PC34 PJ3A-7仍旧遮光C0F79主或移动盘纸空传感器当加纸后升起主(第3)纸盘,主(第3)纸盘无纸传感器PC20 PJ9A-2未遮光当主(第3)纸盘无纸时,PWB-E板上无纸传感器PC20 PJ9A-2仍旧遮光当移动纸盘上的纸垛移到主(第3)纸盘后,移动纸盘纸空传感器PC1 PJ9A-9仍旧遮光C0D表示：复印机选购件：50张纸双面单元工作台PF-6D/双面纸盘AD-11仅2030机C0D00双面侧边拍纸板原位传感器故障初始化时(电源开关ON,打开/关闭前门,双面纸盘拉出/推入)双面侧边拍纸板原位传感器PC9 未遮光C0D20双面后边拍纸板原位传感器故障初始化时(电源开关ON,打开/关闭前门,双面纸盘拉出/推入)双面闸门原位传感器PC8 被遮光时,一段时间后未被遮光;未被遮光时,一段时间后仍未被遮光,初始化时PC8 未被遮光时,一段时间后仍未被遮光.C0D50双面单元驱动电机ON故障双面驱动电机M31按ON后一段时间电机锁住信号为(H)C0D51双面单元驱动电机异常ON双面驱动电机M31按ON后一段时间电机锁住信号为(L)C0b表示:复印机选购件：10斗分页器S-106;10斗分页/装订器ST-104仅2030机C0B10装订纸夹移动故障10斗分页/装订器ST-104C0B11装订纸夹移动故障10斗分页/装订器ST-104C0B12装订纸夹移动故障10斗分页/装订器ST-104C0B13装订纸夹移动故障10斗分页/装订器ST-104C0B30拍纸电机故障(拍纸杆在10斗分页/装订器ST-104C0B31拍纸电机故障(拍纸杆在10斗分页/装订器ST-104C0B50装订电机故障10斗分页/装订器ST-104C0B51装订电机故障10斗分页/装订器ST-104C0B52装订电机故障10斗分页/装订器ST-104C0B60斗移动电机故障10斗分页/装订器ST-10410斗分页器S-106C0B61斗移动电机故障10斗分页/装订器ST-10410斗分页器S-106C0B62斗移动电机故障10斗分页/装订器ST-10410斗分页器S-106C0B63斗移动电机故障10斗分页/装订器ST-10410斗分页器S-106C0B64斗移动电机故障10斗分页/装订器ST-10410斗分页器S-106卡纸或故障I/O口检查1,进入维修程序模式,按0键.进入面板显示模式2,键入7,复印数显示屏复印数显示屏(代码)d73,按纸尺寸选择键,选出要检查的元器件I/O口号再看手动嚗光浓度指示档的相应位指示的ON/OFF状态复印机主体卡纸或故障I/O口检查表注:倍率和复印数显示屏显示集成电路IC口和(IC)编号PF-6D/AD-11PF-6D/AD-11206206112112112112112112112112112112112112112PF-6D/AD-11 112206PF-6D/AD-11 112206PF-6D/AD-11 112206112206112206112206206206206206206206206112112112112PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11PF-6D/AD-11维修程序模式(共有10项)进入法：按面板左上角的计数器(Meter Count)键→停止键(S)→0键→0键→停止键(S)→0键→1键1功能(Function)测试模式2技术人员维修选择模式3改变固定倍率模式 (EP1054机没有此模式)4保养计数/各纸盒计数/选购件计数显示模式5各种尺寸复印纸复印张数显示模式6各纸盒/选购件卡纸计数器显示模式7各故障码故障计数器显示模式8消耗品部件计数器显示模式9纸盒纸尺寸设定模式(EP-1054机没有此模式)0面板显示模式功能(Function)测试模式进入法 进入维修程序模式,按1键功能(Function)测试模式表F1曝光灯ON或OFF自由运行曝光灯的ON或OFF由无级变倍键选择F1曝光灯ON自由运行曝光灯,消电灯,显影偏压和高压ON,进行搓纸,进纸,出纸运行按无级变倍键显示:On F1按无级变倍键显示:Off F1曝光灯OFF自由运行曝光灯,消电灯,显影偏压和高压Off,进行搓纸,进纸,出纸运行F2主充/转印高压ON30秒显示: - - - F2工厂调整输出电压用,不要动F3曝光灯电压调整 F31.曝光灯电压上限调整:1,将万用表接入曝光灯电压测试点2,按倍率1:1键(Full Size)选择曝光灯电压上限调整模式,按复印键 显示:L50(原先设定数) F33,按无级变倍键,使万用表显示的曝光灯电压=81V2.手动曝光灯最佳电压调整:1,按倍率1:1键(Full Size)选择手动曝光模式,曝光灯最佳电压调整 显示:50(原先设定数) F32,按无级变倍键,进行调整 调整范围:18～81F4分离高压ON显示: - - - F4工厂调整输出电压,不要动F5AE传感器自动调整显示: * * F5放5张A3白纸在稿台上,按复印键 显示:* * "00～FF" F5 按1:1键显示输出电压(输出=0～512)F6删边灯ON/OFF检测显示: 100 F6打开稿台盖板按复印键开始扫描前进,进行检测 显示100 F6F7原稿检测传感器检测显示: - - - F7关闭原稿盖板按复印键开始检测 显示 - - - F7 (EP1054没有此模式)F8载体调整 显示:* * F8将新载体瓶装入机內按复印键,载体自动进入显影仓,搅拌5分钟后自动检测墨粉浓度电平 显示:* * 增益"0～99"可按等倍(EP1050用纸尺寸键)键交替显示传感器传感器增益"0～99"或输出电压0～512(×10毫伏)注:机器安装新图象单元(I/U)时不必执行F8(装入载体打开电源开关后,机器会自动进行TD传感器调整,如果调整正常I/U计数器会自动复位,F4保险丝烧断)按等倍(EP1054按纸尺寸键)键交替显示传感器传感器增益"0～99"或输出电压0～512(×10毫伏).F9显影(I/U)部件检查显示: - - - F9(工厂用,显影(I/U)部件检查;最佳曝光缺纸调整)FA负载检测 显示: - - - FA(工厂用,扫描灯架;删边灯运行检查)利用数字键输入功能(Function)测试模式的 F1,F2,F3,…,如要更改数字可按"C"键. 例如:1,进入维修程序模式,按1键 显示100% F进入功能(Function)测试模式2,按"1"键显示On F1进入F1模式3,按"C"键显示100% F返回到功能(Function)测试模式4,按"2"键显示100% F2进入F2模式5,按"C"键显示100% F返回到功能(Function)测试模式6,按"3"键显示46% F3曝光灯,消电灯,显影偏压和高压Off,开始搓纸,进纸,出纸运行例如要进入功能(Function)测试模式的 F1: 曝光灯ON或OFF自由运行1,进入维修程序模式,按1键显示100% F2,按键1显示On F13,按复印键(正常工作模式复印)曝光灯,消电灯,显影偏压和高压ON,开始搓纸,进纸,出纸运行4,按停止键停止(正常工作模式复印)自由运行5,按无级变倍键选择曝光灯ON或OFF显示 Off F16,按复印键曝光灯,消电灯,显影偏压和高压Off,开始搓纸,进纸,出纸运行7,按停止键停止曝光灯,消电灯,显影偏压和高压Off的进纸自由运行8,按面板复位(Panel Reset)键2次退出功能测试模式返回正常工作模式技术人员维修选择模式进入法 1,进入维修程序模式,按2键注:按住停止键的同时按复印键可进行测试复印技术维修选择模式表C0插入式计数器计数模式选择0:按照每张出纸计数1:按每个副本计数注:EP-1050机无C1纸尺寸规格计数器0:不计数1:按A3计数2:按A3/B4计数3:按A3B4；FLS计数C2总印张计数器0:按复印循环计数1:按照纸尺寸和复印模式多次计数2：按照纸尺寸和复印模式多次计数C4维修呼叫(I/U)信号灯显示选择0:维修呼叫(I/U)信号灯不显示1:维修呼叫(I/U)信号灯显示C5保养计数模式选择0:保养计数器1:I/U计数达到"0"时仍可复印2:复印套件计数器(I/U)计数达到"0"时不能复印C6插入式计数器安装设定0:拔下插入式计数器仍可复印1:拔下插入式计数器不能复印EP-1054机无C7I/U计数60K张后停止复印设定0:不停止复印1:60K张后停止复印注:I/U计数器达到60K后或检测到无墨粉时停止复印C15TD浓度比低于3.5%停止复印设定0:不停止复印1:TD浓度比低于3.5%停止复印C20前沿消电增加(3毫米)模式0:前沿消电不增加1:前沿消电增加3毫米C21后沿消电增加(3毫米)模式0:后沿消电不增加1:后沿消电增加3毫米C23对位拱曲量数据调整范围:47(减小)←50→(增加)53,每步0.7毫米,缺省值=50标准,7毫米EP-1054机无C31单面原稿停止位置调整范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,0毫米EP-1054机无C32双面原稿停止位置调整范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,0毫米EP-1054机无C332合1原稿停止位置调整范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,1毫米EP-1054机无C342合1原稿间隔距离调整范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,2毫米EP-1054机无C37半自动进稿(SADF)模式原稿停止位置范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,3毫米EP-1054机无C38自动进稿(ADF)模式对位拱曲量调整范围: (-7毫米)43←50→58(+8毫米)每步1毫米,缺省值=50标准,4毫米EP-1054机无C40原稿到副本类型选择0:所有原稿到副本的类型均可选择1:仅包括双面副本的类型可以选择EP-1054机无C90ATDC传感器粉浓度目标数据设定范围:48(5.0%)←50(6.0%)→53(7.5%)每步0.5%,缺省值=50(T/C比率6.0%)T/D比低于设定值，在复印了37张后T/D比的提升不能达到1%为粉用完状态，T/D比在≥4%粉用完状态取消例1，要进入技术维修选择模式的C0: 插入式计数器计数模式选择1,进入维修程序模式,按2键显示 C %进入技术维修选择模式2,按0键显示 C 0 %3,按复印键显示 C 0 %0显示当前设定值4,按清除键C显示 C 0 %清除当前设定值5,按1键（0:按每张出纸计数1:按每个副本计数）显示C15 %1键入新的设定值6,复印键将1存入内存显示 C %设置已完成7,按面板复位(Panel Reset)键2次显示100 %1退出技术维修选择模式返回正常工作模式例2，要进入技术维修选择模式的C15: TD传感器检测到粉浓度低于3.5%停止复印设定1,进入维修程序模式,按2键显示 C %进入技术维修选择模式2,按15键显示C15 %3,按复印键显示C15 %0显示当前设定值4,按清除键C显示C15 %5,按1键("0"不停止复印;"1"停止复印)显示C15 %1设定TD传感器检测到粉浓度低于2%停止复印6,复印键将1存入内存显示 C %设置已完成7,按面板复位(Panel Reset)键2次显示100 %1退出技术维修选择模式返回正常工作模式改变固定倍率模式(EP1054没有此模式)进入法进入维修程序模式,按3键用1:1键,无级变倍增加键,无级变倍减小键,选择倍率;按清除键"C"该倍率并键入新设定的倍率;按复印键将新设定的倍率存入内存;按面板复位键2次,返回正常工作模式保养计数器/纸盒计数器/选购件计数器显示模式进入法 进入维修程序模式,按4键显示计数器按纸尺寸键选择保养计数器/纸盒计数器/选购件计数器,被选的计数器相对应的指示灯点亮(保养计数器由I/U指示灯LED指示)该计数器的数据会在倍率和复印数显示屏上显示. 例如: 计数为:12345在倍率显示屏上显示123在复印数显示屏上显示45按面板复位键2次,返回正常工作模式清除计数器按纸尺寸键选择要清除的计数器,按清除键"C",清除该计数器(如果清除错了立刻按停止键取消该清除指令)保养周期(PM)计数器的设定:(递减式计数器)按纸尺寸键,使I/U指示灯点亮,显示保养周期计数器的计数,按清除键"C"并键入新的设定数,按复印键注:设定: 保养计数达到"0"时,维修呼叫I/U信号灯显示时仍可复印将保养计数模式 C5 被设定在:0(保养计数器)或1(复印套件计数器(I/U)计数达到"0"时仍可复印)将维修呼叫(I/U)信号灯显示模式C4 被设定在:1(显示维修呼叫(I/U)信号),计数达到"0"时保养呼叫I/U信号灯显示时仍可复印设定: I/U计数达到57.5K保养呼叫I/U信号灯闪亮,仍可复印;达到60K保养呼叫I/U信号灯长亮,停止复印将将保养计数模式 C5 被设定在:2(复印套件计数器(I/U)计数达到"0"时不能复印)将I/U计数达到60K张后停止复印模式C7设定在1(复印套件计数器I/U计数达到60K张后停止复印)将维修呼叫(I/U)信号灯显示模式C4 被设定在:1(维修呼叫I/U信号灯显示)各种尺寸复印纸复印张数显示模式进入法 进入维修程序模式,按5键按纸尺寸键依次,显示下例各种尺寸复印纸复印计数器的计数.(例:倍率和复印数显示屏上显示--- 42 132 97表示该计数器计数为4,213,297张)按纸尺寸键,显示出要清除的计数器,按清除键"C"清除该计数器(如果清除错了立刻按停止键取消该清除指令)按面板复位键2次,返回正常工作模式卡纸计数器显示模式进入法 进入维修程序模式,按6键按纸尺寸键,各纸盒及选购件的卡纸指示灯点亮,同时显示该复印计数器(例:倍率显示屏 123和复印数显示屏上显示J表示卡纸123次);按面板复位键2次,返回正常工作模式按纸尺寸键,显示出要清除的计数器,按清除键"C"清除该计数器(如果清除错了立刻按停止键取消该清除指令)故障计数器显示模式进入法 进入维修程序模式,按7键依次按纸尺寸键,依次显示故障计数器,全部故障计数器显示完复印机接受清除故障计数器指令.依次按纸尺寸键,显示出要清除的故障计数器按清除键清除该故障计数器.按纸尺寸键,显示出要清除的计数器,按清除键"C"清除该计数器(如果清除错了立刻按停止键取消该清除指令)00)消耗品计数器显示模式进入法进入维修程序模式,按8键依次按纸尺寸键,依次显示消耗品计数器,全部计数器显示完复印机接受清除消耗品计数器指令.依次按纸尺寸键,显示出要清除的计数器按清除键清除该计数器.按纸尺寸键,显示出要清除的计数器,按清除键"C"清除该计数器(如果清除错了立刻按停止键取消该清除指令)注:1,复印套件计数器(I/U)计数不能清除2,按了清除键后立即按停止键取消该计数器的清除3,当 F8 调整正常完成时,除定影器外的全部消耗品计数器自动清除纸尺寸设定模式(EP-1054没有此模式)进入法进入维修程序模式,按9键每次按纸尺寸选择键按照下例次序选择纸盒面板显示模式进入法进入维修程序模式,按0键调整(Adj)模式进入法进入维修程序模式,按停止键(S)→复印键。
大众故障码维修指引说明
00000 输出端一.故障可能现象: 如出现该显示,自诊断结束,故障存贮器内无故障存储,如相应的警报指示灯亮,检查下述内容:二.故障可能原因: 1.车速低于6km/h时,控制单元-J104供电电压低于10.0V; 2.控制单元-J104和仪表板J218之间用于控制警报灯-K47的导线断路;3.如未查到故障,但现象仍然存在,则可能是机械故障(电磁阀卡住);三.故障排除方法:1.检查并维修线路2.进行执行元件诊断00001 制动控制单元00002 变速箱控制单元00237 制动防抱死系统左前电磁阀-N59一.故障可能原因:1.液压单元与控制单元之间的电缆接头中正极或接地导线断路或短路;2.ABS进液阀损坏;二.故障排除方法:1.检查所有导线和接头是否存在接触不良;2.更换控制单元; 00238 制动防抱死系统右前电磁阀-N58一.故障可能原因:1.液压单元与控制单元之间的电缆接头中正极或接地导线断路或短路;2.ABS进液阀损坏;二.故障排除方法:1.检查所有导线和接头是否存在接触不良;2.更换控制单元; 00239 制动防抱死系统左后电磁阀-N5700240 制动防抱死系统右后电磁阀-N5600241 牵引力控制压力调节阀-N23800242 发动机节气门回位阀-N23700243 发动机制动00244 制动防抱死系统右前+左后电磁阀电源电压00245 制动防抱死系统左前+右后电磁阀电源电压00246 制动防抱死系统右前+左后电磁阀接地00247 制动防抱死系统左前+右后电磁阀接地00248 变速箱开关-E20600250 离开道路操作开关-E20700254 牵引力控制设置丢失00255 制动防抱死系统电磁阀00257 制动防抱死系统左前进油阀-N10100258 电磁阀1-N881.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地/正极短路2.电磁阀1-N88损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00259 制动防抱死系统右前进油阀-N9900260 电磁阀2-N89一.故障内容:电磁阀2-N891.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地/正极短路2.电磁阀2-N89损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00261 制动防抱死系统后进油阀-N10300262 电磁阀3-N90一.故障内容:电磁阀3-N901.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地/正极短路2.电磁阀3-N90损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00263 变速箱00264 电磁阀 4-N91一.故障内容:电磁阀4-N911.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地短路2.电磁阀4-N91损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00265 制动防抱死系统左前出油阀-N10200266 电磁阀5-N92一.故障内容:电磁阀5-N921.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地短路2.电磁阀5-N92损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00267 制动防抱死系统右前出油阀-N10000268 电磁阀6-N93一.故障内容:电磁阀6-N931.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地短路2.电磁阀6-N93损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00269 制动防抱死系统后出油阀-N10400270 电磁阀7-N94一.故障内容:电磁阀7-N941.断路/对地短路2.对正极短路二.故障可能原因:1.断路或对地短路2.电磁阀7-N94损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行调节机构诊断4.进行电气检测00271 见修理组0100273 制动防抱死系统右后进油阀-N13300274 制动防抱死系统左后进油阀-N13400275 制动防抱死系统右后出油阀-N13500276 制动防抱死系统左后出油阀-N13600277 制动防抱死系统左前进/出油阀-N137 00278 主制动防抱死系统阀-N10500279 差速器锁阀1-N12500280 差速器锁阀2-N12700281 车速传感器-G68一.故障内容:车速传感器(VSS)-G68减速时发动机失速二.故障排除方法:1.若转速计不工作,则对其进行修理或更换2.若转速计正常,则检查其与PCM的连线是否良好3.否则,更换PCM 00282 节气门电位器-V60一.故障内容:节气门调节器-V60可能故障:1.输出打不开/对地短路2.输出打不开/正极短路3.短路二.故障可能现象:1.冷起动问题2.冷怠速问题3.负荷交变4.怠速问题三.故障可能原因:1.调节器导线对地短路2.调节器电机对蓄电池正极短路3.导线断路4.怠速调节超过极限值5.导线和调节器电机之间短路6.调节器电机内短路四.故障排除方法:1.检查-V602.检查节气门控制单元00283 左前速度传感器-G47一.故障内容:左前车速传感器-G47断路/对正极短路二.故障可能原因:1.-G47安装不对2.转子脏污或损坏3.车轮轴承间隙过大4.-G47损坏5.对地短路6.-G47或-J104间导线断路,对正极短路三.故障排除方法:1.检查转速传感器安装位置2.检查前轮和四轮驱动底盘3.检查、清洁或更换转子4.更换车轮轴承5.读取测量数据块6.电气检测7.如果在"读取数据测量块"时无显示,也未查到导线及转速传感器故障,更换液压控制单元00284 制动防抱死系统右前进/出油阀-N13800285 右前速度传感器-G45一.故障内容:右前轮车速传感器-G45断路/对正极短路二.故障可能原因:1.-G45安装不对2.转子脏污或损坏3.车轮轴承间隙过大4.-G45损坏5.对地短路6.-G45或-J104间导线断路,对正极短路三.故障排除方法:1.检查转速传感器安装位置2.检查前轮和四轮驱动底盘3.检查、清洁或更换转子4.更换车轮轴承5.读取测量数据块6.电气检测7.如果在"读取数据测量块"时无显示,也未查到导线及转速传感器故障,更换液压控制单元00286 制动防抱死系统左后进/出油阀N13900287 右后速度传感器-G44一.故障内容:右后轮车速传感器-G44断路/对正极短路二.故障可能原因:1.-G44安装不对2.转子脏污或损坏3.车轮轴承间隙过大4.-G44损坏5.对地短路6.-G44或-J104间导线断路,对正极短路三.故障排除方法:1.检查转速传感器安装位置2.检查前轮和四轮驱动底盘3.检查、清洁或更换转子4.更换车轮轴承5.读取测量数据块6.电气检测7.如果在"读取数据测量块"时无显示,也未查到导线及转速传感器故障,更换液压控制单元00289 制动防抱死系统右后进/出油阀-N14000290 左后速度传感器-G46一.故障内容:左后轮车速传感器-G46断路/对正极短路二.故障可能原因:1.-G46安装不对2.转子脏污或损坏3.车轮轴承间隙过大4.-G46损坏5.对地短路6.-G46或-J104间导线断路,对正极短路三.故障排除方法:1.检查转速传感器安装位置2.检查前轮和四轮驱动底盘3.检查、清洁或更换转子4.更换车轮轴承5.读取测量数据块6.电气检测7.如果在"读取数据测量块"时无显示,也未查到导线及转速传感器故障,更换液压控制单元00291 压力开关-F116/报警触点-F11700292 液压能量供应压力水平00293 多功能开关-F125一.故障内容:多功能开关-F125信号不可靠二.故障可能原因:1.断路或对地及正极短路2.多功能开关电源线断,多功能开关-F125损坏3.接多功能开关的插头未插上三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行电气检查4.必要时,更换-F125 00294 变速箱压力开关100295 变速箱压力开关200296 强制降挡加速开关-F8一.故障内容:强制降档开关-F8对地短路二.故障可能原因:1.F8和变速箱控制器之间对地短路2.F8和变速箱控制器之间断路3.强制降档开关-F8坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行电气检查4.调整油门踏板拉线,必要时更换00297 变速箱速度传感器-G38一.故障内容:变速箱转速传感器-G38无信号二.故障可能原因:1.对地或正极短路或断路2.-G38屏蔽损坏3.变速箱转速传感器损坏4.发动机或变速箱输入转速信号错误5.ATF液位不对,变矩器损坏或出错6.离合器/刹车打滑或电磁阀坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行电气检查4.必要时更换变速箱转速传感器-G385.检查AFT液位6.读取数据值块,显示组号004到006,并且在行驶中确定,哪个元件损坏或不起作用00298 差速器锁开关-E12100299 编程开关-E12200300 变速箱机油温度传感器-G93一.故障内容:变速箱机油温度传感器-G931.对地短路2.断路/对正极短路二.故障可能原因:1.断路或短路2.变速箱机油温度传感器-G93损坏3.ATF位置不合格三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据值块3.进行电气检查4.检查ATF位置,进行ATF检查及更换5.变速箱油温传感器-G93和变速箱内部线束在一起00301 制动防抱死系统回流泵-V39一.故障内容:ABS回油泵-V39二.故障可能原因:液压控制单元有故障三.故障排除方法:1.清除故障存贮器2.结束输出3.关闭点火开关4.打开点火开关5.如故障又出现,更换液压控制单元00302 制动防抱死系统电磁阀继电器J106 00303 功能选择开关-E9100305 油耗指示信号00306 第1组汽缸二次空气系统00307 第2组汽缸二次空气系统00309 清洁液分配泵V13500310 触媒温度传感器1-G2000312 触媒温度传感器2-G13200313 触媒00314 废气再循环双向阀-N16100347 电磁阀8-N28100348 电磁阀9-N28200349 电磁阀10-N28300350 接地回线，调节活塞00351 中间轴速度传感器-G26500448 预压力泵，哈尔德克斯离合器-V181 00449 预压力泵接通00450 预压力泵切断00451 四轮离合器脱开00452 四轮离合器啮合00453 超温功能限制00454 四轮监控控制单元CAN-J518存取和开始控制控制单元-J518存取和开始控制网络接口控制单元-J519电瓶监控控制单元-J367 00503 阀控制泵/管道00504 第一缸泵/喷嘴阀-N24000505 第二缸泵/喷嘴阀-N24100506 第三缸泵/喷嘴阀-N24200507 第四缸泵/喷嘴阀-N24300508 第五缸泵/喷嘴阀-N24400509 第六缸泵/喷嘴阀-N24500512 霍尔传感器无参考信息00513 发动机转速传感器-G28一.故障内容:发动机转速传感器-G28可能故障:1.无可靠信号2.无信号二.故障可能现象:1.发动机停转2.发动机起动不着三.故障可能原因:1.-G28松动2.传感器齿轮松动3.信号导线断路或对地短路,或对正极短路4.接地线断路,或对正极短路5.-G28松动或损坏6.-G28的护板导线断路四.故障排除方法:1.检查-G28的牢固性2.检查传感器齿轮的牢固性3.检查-G28 00514 点火正时传感器-G4或曲轴位置传感器(CKP) 一.故障内容: 点火正时传感器-G4或曲轴位置传感器(CKP)二.故障排除方法:1.检查曲轴位置传感器是否良好,是否松动,是否曲轴位置传感器空隙过大2.线路故障3.PCM故障00515 霍尔传感器一.故障内容:霍尔传感器-G40可能故障:1.断路/对正极短路2.对地短路二.故障可能现象:1.在节气门全开时功率不足2.排放值不合格3.燃油消耗高三.故障可能原因:1.断路或对正极短路2.传感器盘松动3.-F40损坏4.对地短路四.故障排除方法:检测霍尔传感器00516 怠速开关-F60 一.故障内容:怠速开关-F60可能故障:1.断路/对正极短路2.对地短路二.故障可能现象:1.怠速问题2.起动时行驶性能不好三.故障可能原因:1.接地线有断路点2.导线对正极短路3.-F60损坏4.导线对正极短路四.故障排除方法:1.进行基本调整2.检查-F603.检查节气门控制单元00517 节气门全开开关-F8100518 节气门电位器-G69 一.故障内容:节气门电位计-G69不确定信号二.故障可能原因:1.用发动机控制器诊断节气门电位计2.节气门电位计和发动机控制器之间线路连接损坏3.发动机控制器错误或坏了4.变速箱控制器错误或坏了三.故障排除方法:1.读取测量值2.读取发动机控制器故障存储器并排除故障3.自诊断4.检查发动机控制器识别5.必要时更换发动机控制器6.检查变速箱控制器识别00519 进气歧管压力传感器-G71 00520 空气质量/流量计-G70/G1900521 CO电位计-G7400522 冷却液温度传感器-G62一.故障内容:冷却液温度传感器-G62可能故障:1.对地短路2.断路/对正极短路3.不可靠信号二.故障可能现象:1.冷起动性能不好2.热起动性能不好3.无怠速转速自适应4.废气排放值升高5.油耗升高三.故障可能原因:1.导线对地短路2.-G62损坏3.接地线中有断路点4.导线对正极短路四.故障排除方法:检查冷却液温度传感器-G62 00523 进气温度传感器-G4200524 爆震传感器1-G61一.故障内容:爆震传感器1-G61断路或对地短路二.故障可能现象:1.功率降低2.油耗升高三.故障可能原因:1.导线断路或对地短路2.-G61损坏四.故障排除方法:检查-G61 00525 氧传感器-G39一.故障内容: λ传感器-G39可能故障:1.无信号2.对地短路3.对正极短路4.不可靠信号二.故障可能现象:1.无λ调节2.有汽油味3.油耗升高4.行驶性能不好5.废气排放值升高三.故障可能原因:1.导线断路2.-G39损坏3.导线对地短路4.导线对正极短路四.故障排除方法:检查λ传感器及λ调节00526 制动灯开关-F一.故障内容:制动灯开关-F不可靠信号二.故障可能原因:1.刹车灯开关-F损坏2.变速箱控制器和刹车灯-F之间接地断线或对地/正极短路三.故障排除方法:1.根据电路图检查管路或插头连接2.读取测量值块3.进行电气检查4.必要时更换刹车灯开关-F 00527 进气歧管温度传感器-G72一.故障内容:进气温度传感器-G72可能故障:1.对地短路2.断路/对正极短路二.故障可能现象:1.热起动性能不好2.废气排放值升高三.故障可能原因:1.导线对地短路2.-G72损坏3.导线接地线中有断路点4.导线对正极短路四.故障排除方法:检查进气温度传感器及其有关线路00528 海拔高度传感器-F96 一.故障内容:海拔高度传感器-F96可能故障:1.信号过大2.信号过小二.故障可能现象:1.起动不良2.增压压力降低(增压器转速的安全限制)三.故障可能原因:1.断路或对正极短路2.-F96损坏3.对地短路4.-F96的供电有故障四.故障排除方法:检查海拔高度传感器及其相关线路00529 转速信号丢失一.故障内容:1.转速信号丢失2.断路/对地短路3.正极短路4.不可靠信号二.故障可能原因:1.发动机控制器到变速箱控制器电线断2.发动机转速受非法安装的电气线路干扰而出错(例如后装电话)3.发动机转速传感器到发动机控制器信号有错4.发动机转速感器-G28坏了5.发动机控制器坏6.对地/正极短路7.车载电脑短路三.故障排除方法:1.根据电路图检查管路和插头连接2.读取测量值块3.进行电气检查4.读取发动机控制器故障存储器并排除故障00530 节气门调节器/电位计-G88一.故障内容:节气门调节器/电位计-G88断路或对正极短路,对地短路二.故障可能现象:1.冷起动不良2.怠速转速值不正确3.冷车怠速不良4.怠速不稳三.故障可能原因:1.地线断路2.G88损坏3.导线对正级短路4.导线对地短路四.故障排除方法:1.检查G882.检查节气门控制单元00531 质量型空气流量计参考电压00532 供电电压00533 怠速调节一.故障内容:怠速调节超过自适应界限二.故障可能现象:怠速转速不在允许范围三.故障可能原因:1.节气门控制单元的节气门支管变脏2.节气门调节器-V60卡死3.进气系统密封不良四.故障排除方法:1.清洗节气门控制单元的节气门支管2.检查节气门调节器,检查节气门控制单元3.检查进气系统的密封性(漏气) 00534 机油温度传感器-G8 00535 第一爆震调节00536 第二爆震调节00537 氧传感器控制00538 参考电压00539 燃油温度传感器-G8100540 爆震传感器2-G66一.故障内容:爆震传感器2-G66断路或对地短路二.故障可能现象:1.功率降低2.油耗升高三.故障可能原因:1.导线断路或对地短路2.-G66损坏四.故障排除方法:检查-G66 00541 侧向移动电位器-G9900542 针阀升程传感器-G8000543 超过最大转速一.故障内容:超过最大转速(发动机转速)二.故障可能原因:1.断线2.发动机转速信号受非法安装电气线路的干扰而出错(例如加装电话)3.发动机转速传感器到发动机控制器的信号有错4.发动机转速传感器-G28损坏5.发动机转速限制损坏6.发动机控制器损坏7.不允许反接变速箱(如,滑阀箱机械失灵)三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据测量值块,显示组号0013.根据发动机故障代码16706排除故障4.读取发动机控制器故障存储器并排除故障5.必要时更换发动机控制器6.读取测量值块,显示组号005并在行驶中确定哪个元件损坏或不起作用7.必要时更换单个电磁阀或滑箱阀00544 超过最大增压压力一.故障内容:超过最大推进力二.故障可能现象:输出功率突然降低(超速切断直到增压压力降到适当水平)三.故障可能原因:1.软管缠绕,没装好,堵塞,漏气2.增压器控制电磁阀损坏3.增压器损坏4.对地短路四.故障排除方法:1.检测增压压力控制2.检测增压控制电磁阀00545 发动机/变速箱电气连接一.故障内容:发动机/变速箱电气连接1.插头连接2.断线/对地短路3.对正极短路二.故障可能原因:1.断线或短路2.发动机/变速箱控制管脚20未接3.拔下发动机控制器插头时,打开了点火开4.发动机控制器损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.读取数据测量值块,显示组号0043.读取发动机控制器存储器并排除故障4.读取发动机控制器故障存储器并排除故障5.必要时更换发动机控制器00546 数据电缆损坏00547 制动防抱死系统压力控制开关-F13700548 故障存储器电源供应00549 油耗信号一.故障内容:燃油消耗信号:1.对地短路2.正极断线/短路3.不可靠信号二.故障可能原因:1.发动机和变速箱控制器之间线路触点松动2.车载电脑短路3.发动机和变速箱之间接地线或正极断线或短路(到35号脚)4.发动机控制器和车载电脑之间边线短路及发动机控制器损坏三.故障排除方法:1.根据电路图检查线路和插头连接2.检查车载电脑3.读取数据测量值块,显示组号0094.进行电气检查5.读取发动机控制器故障存储器和排除故障6.必要时更换发动机控制器00550 喷射偏差调节00551 触媒超温00552 空气流量计电位器-G1900553 质量型空气流量计-G70可能故障:1.断路/对地短路2.对正极短路3.不可靠信号4.没有达到下限(-)二.故障可能现象:1.功率降低2.油耗升高3.废气排放值升高4.行驶性能不好三.故障可能原因:1.导线断路或对地短路2.导线对正极短路3.-G70损坏4.空气流量计-G70与发动机之间漏气5.-G70变脏四.故障排除方法:1.检查-G702.检查进气系统密封性(漏气)3.读取测量数据块,显示组008 00554 氧传感器控制II00555 氧传感器II-G10800556 废气再循环电位器-G2/200557 动力转向/压力开关-F800558 混合气过稀调节极限00559 混合气过浓调节极限00560 废气再循环系统00561 混合气自适应一.故障内容:1.混合气自适应超过自适应极限(+)注:(+)=故障只出现在怠速时2.混合气自适应超过自适应极限(-)注:(-)=故障在发动机任何转速及负荷范围内都可发生二.故障可能原因:1.燃油系统压力过低2.来自空气流量计的信号错误3.催化转换器之前的排气系统漏气4.空气流量计后部方向漏气5.喷油阀烧焦三.故障可能影响:1.车辆行驶不平顺2.燃油消耗升高3.怠速不稳四.故障排除方法:1.给车加注燃油,并检查燃油系统压力2.检查空气流量计3.排除漏气处4.检查喷油阀00562 机油液位/温度传感器-G266一.故障内容:机油油面温度传感器-G2661.断路/对正极短路2.对地短路3.不可靠信号二.故障可能原因:1.机油油面/机油温度传感器-G266与组合仪表板间导线断路或短路2.机油油面/机油温度传感器-G266损坏3.传感器内电子部件损坏三.故障排除方法:1.按电路图查询故障2.排除导线断路3.更换机油油面/机油温度传感器-G266 00563 电流消耗显示-Y10 00564 机油温度传感器00565后部全自动空调显示/控制-E26500566辅助转向00567 转向电机激活00568 转向电机中的位置传感器00569 转向电机电流00570 转向电机继电器-J50900571 转向离合器00572 转向位置传感器-G26800573 转向力矩传感器-G6900574 驱动电机启动00575 进气歧管压力一.故障内容:进气歧管压力可能故障:1.没有达到调节限度2.超过调节限度二.故障可能现象:1.功率增大2.功率减小3.功率输出减少三.故障可能原因:1.空气流量计的输出信号太弱2.在增压器与空气流量计之间有漏气处3.增压器的压力单元发卡4.增压控制电磁阀损坏5.断路或短路6.空气流量计的输出信号太强7.增压器的压力单元发卡8.增压控制电磁阀损坏四.故障排除方法:1.检测空气流量计2.检查进气系统3.检测增压控制00576 接线柱1500577 第1缸爆震控制一.故障内容:1缸爆震调节二.故障可能现象:1.油耗高2.功率降低3.发动机运转不稳4.不能达到最高车速三.故障可能原因:1.燃油质量不好2.发动机有不正常噪音3.爆震传感器屏蔽板导线断路4.插头接触不良5.爆震传感器拧紧力矩不正确四.排除方法:1.要加标注号最低为91ROZ的汽油2.检查爆震传感器及其相关线路3.利用检测仪器读取测测量数据块,显示组014及015,爆震调节4.拧紧爆震传感器(20Nm) 00578 第2缸爆震控制一.故障内容:2缸爆震调节二.故障可能现象:1.油耗高2.功率降低3.发动机运转不稳4.不能达到最高车速三.故障可能原因:1.燃油质量不好2.发动机有不正常噪音3.爆震传感器屏蔽板导线断路4.插头接触不良5.爆震传感器拧紧力矩不正确四.排除方法:1.要加标注号最低为91ROZ的汽油2.检查爆震传感器及其相关线路3.利用检测仪器读取测测量数据块,显示组014及015,爆震调节4.拧紧爆震传感器(20Nm) 00579 第3缸爆震控制一.故障内容:3缸爆震调节二.故障可能现象:1.油耗高2.功率降低3.发动机运转不稳4.不能达到最高车速三.故障可能原因:1.燃油质量不好2.发动机有不正常噪音3.爆震传感器屏蔽板导线断路4.插头接触不良5.爆震传感器拧紧力矩不正确四.排除方法:1.要加标注号最低为91ROZ的汽油2.检查爆震传感器及其相关线路3.利用检测仪器读取测测量数据块,显示组014及015,爆震调节4.拧紧爆震传感器(20Nm) 00580 第4缸爆震控制一.故障内容:4缸爆震调节二.故障可能现象:1.油耗高3.发动机运转不稳4.不能达到最高车速三.故障可能原因:1.燃油质量不好2.发动机有不正常噪音3.爆震传感器屏蔽板导线断路4.插头接触不良5.爆震传感器拧紧力矩不正确四.排除方法:1.要加标注号最低为91ROZ的汽油2.检查爆震传感器及其相关线路3.利用检测仪器读取测测量数据块,显示组014及015,爆震调节4.拧紧爆震传感器(20Nm) 00581 第5缸爆震控制一.故障内容:5缸爆震调节二.故障可能现象:1.油耗高2.功率降低3.发动机运转不稳4.不能达到最高车速三.故障可能原因:1.燃油质量不好2.发动机有不正常噪音3.爆震传感器屏蔽板导线断路4.插头接触不良5.爆震传感器拧紧力矩不正确四.排除方法:1.要加标注号最低为91ROZ的汽油2.检查爆震传感器及其相关线路3.利用检测仪器读取测测量数据块,显示组014及015,爆震调节4.拧紧爆震传感器(20Nm) 00582 第6缸爆震控制一.故障内容: 6缸爆震调节二.故障可能现象:1.油耗高。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Seite 2
VW 10540-1: 2006-06
─
Normteilen ─
Halbzeugen ─ Teilen, bei denen aus Platzmangel eine Kennzeichnung nicht möglich ist bzw. nicht lesbar (Begriff siehe DIN 1450) angebracht werden kann.
Bei Teilen, die von ihrer Beschaffenheit her nicht mit dem Hersteller-Code nach dieser Norm gekennzeichnet werden können, sind Kennzeichnungsalternativen wie z.B. die Hersteller-Code-Kennzeichnung mit Etiketten (Labeln) zwischen verantwortlicher Konstruktion, dem Hersteller und der Herstellercode-vergebenden Stelle und ihre Übernahme in die entsprechenden Dokumente zu vereinbaren.
Ausnahme: Für Ventilfedern sind den Herstellern nach VW 10540-7 Farbmarkierungen als Hersteller-Code zugeordnet.
2 Anforderungen
Die Kennzeichnung der Teile ist sofort bei Neuentwicklungen und Erstbestellungen vorzunehmen. Fehlende Kennzeichnungen sind unverzüglich aufzubringen. Die Kennzeichnungsvorgabe nach Bild 2 ist sicherzustellen. Nicht zutreffende Kennzeichnungen sind in der Zeichnung zu streichen. Die Kennzeichnung muss so ausgeführt sein, dass die Haltbarkeit und Lesbarkeit entsprechend der Lebensdauer der Teile gewährleistet ist. Sie ist durch geeignete Herstellverfahren, wie z. B. Prägen, Ätzen, Erodieren, auf die Teile aufzubringen.
ANMERKUNG Vorzugsweise ist die Kennzeichnung durch Einarbeitung in das Herstellwerkzeug auf das Teil aufzubringen.
Die Code-Zeichen sollen möglichst in halber Größe des Markenzeichendurchmessers “d 1“ oder der Markenzeichenhöhe “h“ nach VW 10514 ausgeführt werden, jedoch bei entsprechender Kennzeichnungsfläche die Schriftgröße von 2 mm nicht unterschreiten.
Zusammenbauten (ZSB), die als ein Ersatzteil vertrieben werden, sind nur einmal zu kennzeichnen, während jedes Einzelteil eines ZSBs, das als Ersatzteil ausgewiesen ist, auch jeweils gekennzeichnet sein muss.
Die Kennzeichnung am Teil sollte nach Möglichkeit in Einbaulage sichtbar angeordnet sein. Für im Sichtbereich des Kunden liegende Teile ist Abstimmung über den Anbringungsort der Kennzeichnung mit Design und der Hersteller-Code- vergebenden Stelle erforderlich.
Für die Kennzeichnung gilt die Schrift nach DIN 1451-4 (Mittelschrift).
Weitere Kennzeichnungsanforderungen enthält VW 10500.
Seite 3
VW 10540-1: 2006-06
3
Kennzeichnung-Ausführungsbeispiel (Bild 1) und Zeichnungsangabe (Bild 2) 3.1 Kennzeichnung-Ausführungsbeispiel
Nenndurchmesser
nach VW 105 14
05
(DE)
Bild 1
3.2 Zeichnungsangabe für Bild 1 (Wiederholtext; VW 01014, NO-E2):
Kennzeichnung
VW 105 00 Identification
Markenzeichen
VW 105 14 - C6 Trademark
Herstellland
Country of origin
Hersteller-Code 3)
Mfr.-Code -
Teil-Nr.; Schrift
Pt.-No; Lettering Datumskennzeichnung VW 105 60 - A6
Date of manufact.
Werkstoff-Code
VDA 260 > PP + EPDM < Material-Code
Bild 2
1)
Bei Platzmangel ist der Zweibuchstaben-Code nach VW 10550 zu verwenden. 2)
Hersteller-Code 3 Zeichen 3) Anstelle "Hersteller-Code" nach VW 10540-1 ist bei Ventilfedern VW 10540-7 anzugeben . 1)
2) 3D0
Seite 4
VW 10540-1: 2006-06
4 Mitgeltende Unterlagen
VW 01014 Zeichnungen, Zeichnungsrahmen und Wiederholtexte
VW 105 00 Firmenbezeichnung, Teilekennzeichnung; Richtlinien für die Anwendung
VW 10514 Markenzeichen; Kennzeichnung von Fahrzeugteilen
VW 10540-3 Hersteller-Code; Vergabebereiche für Hersteller-Code- vergebende
Auslandswerke
VW 10540-7 Kennzeichnung von Ventilfedern
VW 10550 Herstellland-Kennzeichnung; Fahrzeugteile
DIN 1450 Schriften, Leserlichkeit
DIN 1451-4 Schriften; serifenlose Linear Antiqua; Schablonenschrift für Gravieren und Schreiben。