ATOS Core 3D扫描操作指南说明书

MDMF(CWB)
ATOS C ORE –3D S CANNING
O PERATION G UIDE
A.Hardware Setup
1.Ensure that the connection between the ATOS Core 3D scanner and Dell laptop is tight and the USB
dongle is tightly inserted into the USB port:
B.Object Preparation
2.Apply some reusable adhesive (such as Blu-
Tack) to the bottom of the workpiece and
attach the object at the center of the rotary
platform:
unch Scanning Software
3.Power on the Dell laptop.
4.Login account “user”:
unch the scanning software “GOM Scan” by double-clicking the icon:
6.Ensure the ATOS Core 3D scanner is ON (noting that there is
a blue light in the front panel of the 3D scanner):
D.3D Scanning
7.Create new project:
7.1Pull-down menu: File -> New Project.
8.Cross lines alignment:
8.1Check the black and white cross lines at
the Camera window and make sure that
the bounding rectangles of the two
crosses are overlapped:
8.2If the two crosses are not overlapped
well, then please adjust the alignment
by relocating the tripod of the scanner.
9.Exposure adjustment:
9.1Adjust (by turning the middle mouse
button) the “knob” as shown in the
lower left-hand corner of the Camera
window so that no red color is shown in
the captured image:
10.Scanning:
10.1Press the “SPACE” bar of the
keyboard to start the scanning process,
and the “Measurement Delay” will be
displayed:
10.2If the “Measurement Error” dialog is displayed, then please click on the button “Use”.
10.3After the first scanning is completed, the scanned model will be displayed in the graphics
screen:
11.Scanning other areas:
11.1Turn the rotary platform by an
angle (say, 10°) so that the
consecutive area of the object can be
viewed by the camera:
11.2Repeat step 10 to scan the newly exposed area.
12.Repeat step 11 until the required areas are scanned successfully.
13.Save scanned model file:
13.1 Combined scanning results by pull-
down menu: Acquisition -> Measurement
Series -> Polygonize and Recalculate…:
13.2 Select the appropriate polygonization
resolution, say, “Standard”:
13.3 Save the GOM project by pull-down menu: File ->
Save:
14.4 Select Drive D for storing of project file, and then
enter your desired project name:
14.5 Export combined mesh model to STL file by pull-down menu: File -> Export -> Mesh -> STL: 14.6 Specify the STL filename at Drive D by clicking the “right arrow” button of “Filename” edit box, and then enter the desired STL filename:
- Please make sure that the “Export in one file” is checked ON:
14.7 Click the “OK” button to create the specified STL file:
REMARKS:
-For any assistance, please contact Mr. Chit Lai (2358.6832) / Mr. Terence Chan (2358.8676).。