角钢钢材检测报告
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
角钢钢材检测报告 Company number：【0089WT-8898YT-W8CCB-BUUT-202108】
钢材检测报告
Steel Test Report
样品名称角钢建设单位无锡明阗通用设备制造有限公司报告编号
Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment
Manufacturing Co., Ltd Report number:
委托单位无锡明阗通用设备制造有限公司施工单位 ---- 检测类别
委托检测
Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test
工程名称 JMR2x60t/h燃煤锅炉工程监理单位 ---- 样品状态可检
Project name : JMR2x60t/h coal-fired boiler project Supervision unit:
Sample status: Detectable
检测依据 GB/T706-2008热轧型钢检测环境 20O C 检测日期 2012-
11-28
Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20O C
Inspection date: November 28, 2012
表1 化学成分
表2 机械性能 Table 2. Mechanical properties
检测报告说明：1.若对报告有异议，应于收到报告之日期起十五日内，以书面形式向检测单位提出，逾期视为对报告无异议。
2.送样检测，检测结果仅对来样负责。
3.报告及其复印件未加盖本单
位检测报告专用章，报告无效。
Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the objections shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived.
2. For entrusted tests, the test results presented in this report relate only to the samples delivered.
3. This report and the copies of it are not valid unless stamped by the inspection unit.
检测单位：无锡市建筑工程质量检测中心
Test unit: Wuxi Inspection Center for Construction Quality
负责人：审核人：试验人：单位地址：江苏省无锡市新区新辉环路8号
Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 报告日期： 2012-11-28
Report date: November 28, 2012
Certificate No. B0035 B0322 B0377 邮编： 214028
Zip Code: 214028
钢材检测报告
Steel Test Report
样品名称角钢建设单位无锡明阗通用设备制造有限公司报告编号
Sample name: Angle steel Construction unit: Wuxi Mingtian General Equipment
Manufacturing Co., Ltd Report number:
委托单位无锡明阗通用设备制造有限公司施工单位 ---- 检测类别
委托检测
Client: Wuxi Mingtian General Equipment Manufacturing Co., Ltd Construction unit: Test category: Entrusted Test
工程名称 JMR2x60t/h燃煤锅炉工程监理单位 ---- 样品状态可检
Project name : JMR2x60t/h coal-fired boiler project Supervision unit:
Sample status: Detectable
检测依据 GB/T706-2008热轧型钢检测环境 20O C 检测日期 2012-
11-28
Test Standard: GB/T706-2008 hot-rolled steel section Testing environment: 20O C
Inspection date: November 28, 2012
表1 化学成分
表2 机械性能 Table 2. Mechanical properties
检测报告说明：1.若对报告有异议，应于收到报告之日期起十五日内，以书面形式向检测单位提出，逾期视为对报告无异议。
2.送样检测，检测结果仅对来样负责。
3.报告及其复印件未加盖本单
位检测报告专用章，报告无效。
Notes for test report: 1. In case of test discrepancy, objections should be filed within 15 days after the receipt of the test report, meanwhile, the objections shall be submitted in written form to the inspection unit, otherwise overdue objections shall be waived.
2. For entrusted tests, the test results presented in this report relate only to the samples delivered.
3. This report and the copies of it are not valid unless stamped by the inspection unit.
检测单位：无锡市建筑工程质量检测中心
Test unit: Wuxi Inspection Center for Construction Quality
负责人：审核人：试验人：单位地址：江苏省无锡市新区新辉环路8号
Address: No. 8 Xinhui Ring Road, Wuxi New District, Jiangsu Director Reviewer: Tester: 报告日期： 2012-11-28
Report date: November 28, 2012
Certificate No. B0035 B0322 B0377 邮编： 214028
Zip Code: 214028
钢材检测报告
Steel Test Report
样品名称角钢建设单位无锡明阗通用设备制造有限公司报告编号