PE3535-48中文资料
联信材料成份表(PE成分表
检测报告号
测试結果 （OK/NG)
检测报告号
测试結果 （OK/NG)
检测报告号
测试結果 （OK/NG)
RLSZE002
CNASL0167
1.在填写本表格前请详细阅读表格 2中的注意事项和表格3中的样板。 2.每年提供一次测试报告.若变更时须重新测试送样安科讯承认. 3.提供至联信的第三方检测报告必须为:SGS、ITS、CTI、AOV(英文版或中英文版） 4.必须依联信承认的环保零件填写.(若零件承认时有无卤素要求,请填写无卤项目). 5.如贵司向敝司提供的产品符合其它法律法规的要求，或有测试其它有项目请在“备注”栏注明清楚。
級）
均质材料 CAS NO:
原材料制造厂家 及原产国（中文
名称）
原材料制造厂家及 原產国（英文名 称）
PE脂 PE Βιβλιοθήκη esin62%PE
9002-88-4
广州金信公司 Guangzhou jinxin corporation
1
扎带
黑椭PE扎
永豪
色母 masterbatch
3.00%
29094-61-9 东莞世荣公司 The dongguan LTD
镀锌铁丝 Galvanized iron wire
35.00%
0.45MM
7439-89-6
东莞恒铁公司
Dongguan heng iron company
欧盟RoHS六項
检测报告号 RLSZE001
测试結果 （OK/NG)
REACH 84项
多环芳烃（16 种环） PAHs
全氟辛烷磺酸及其盐(PFOS)
测试方法要求：Pb:ICP-AES US EPA3050B or IEC62321 Cd:ICP-AES EN1122:2001 or IEC62321IEC62321 Hg:ICP-AES US EPA3052 or IEC62321 Cr6+:US EPA7196A and US EPA3060A or IEC62321 PBBs&PBDEs:As perGC/MS After As per 83/264/EEC F&Cl&Br&I:BS EN14582:2007 PAHs:US EPA 8270D or ZEK 01-08 PFOS:EPA 3540C:1996
N32G4FR系列勘误手册V1.0说明书
N32G4FR系列勘误手册V1.0目录1 勘误列表 (1)2 电源控制（PWR） (3)2.1S TOP2模式唤醒 (3)3 复位和时钟控制（RCC） (4)3.1系统定时器（S YSTICK） (4)4 GPIO和AFIO (5)4.1SPI1从模式，USART2同步模式 (5)4.2SPI1主模式，USART2同步模式 (5)4.3SPI2从模式，USART3同步模式 (5)4.4SPI2主模式，USART3同步模式 (5)5 模拟/数字转换（ADC） (6)5.1ADC数据左对齐 (6)5.2ADC模拟看门狗 (6)5.3ADC注入通道触发规则通道转换 (6)5.4从ADC转换受主ADC转换影响启动 (7)5.5相邻ADC数据寄存器受影响 (7)6 串行外设接口（SPI） (8)6.1SPI接口 (8)6.1.1 SPI波特率设置 (8)6.1.2 从模式CRC校验 (8)6.2I2S接口 (9)6.2.1 PCM长帧模式 (9)7 I2C接口 (10)7.1当前字节传输前必须被管理的软件事件 (10)7.2单次读取单或双字节时的注意事项 (10)7.3与其他外设同时使用DMA (11)8 通用同步异步接收器（USART） (12)8.1校验错误标志 (12)8.2RTS硬件流控 (12)9 调试接口（DBG） (13)9.1D EBUG寄存器 (13)10 定时器（TIM） (14)10.1定时器重复捕获检测 (14)11 实时时钟（RTC） (15)11.1RTC预分频 (15)11.2RTC校准 (15)11.3RTC计时 (15)12 芯片丝印及版本说明 (16)13 版本历史 (17)14 声明 (18)1勘误列表表1-1勘误概述2电源控制（PWR）2.1Stop2模式唤醒描述MCU处于Stop2模式，如在被唤醒的同时发生NRST复位，NRST不能复位MCU，唤醒优先，MCU将先响应唤醒。
HQxxxx-xxx-3AA中文资料
HQ SeriesSPECIFICATIONS STANDARD*SPECIAL ELECTRICALCenter Frequency (Fc)100 to 1000 Mhz80 to 1400 MHz 3dB Relative Bandwidth (% of FC) 4 to 40 4 to 50 Number of Sections Available 3 to 8 2 to 10 Nominal Impedance50 Ohms50 to 75 Ohms Maximum Insertion Loss See Curve See Curve Maximum VSWR 1.5/1 1.3/1 Attenuation in the Stopband See Graph See GraphMaximum Input Power (Average)(Watts to10,000 ft.)500 x 3dB BW (MHz)(Loss Factor)(Fc MHz)See StandardMaximum Input Power (Peak)(Watts to10,000 ft.)300 x 3dB BW (MHz)Fc (MHz)2,000ENVIRONMENTALShock15 G's25 G's Vibration 5 G's10 G's Humidity90% relative100% relativeINSERTION LOSS:The Maximum Insertion Loss at center frequency is equal to :LF x (N + 0.5) / % 3 dB BW + 0.2 Where:LF= Loss Factor, N= Number of Sections% 3dB BW:3dB BW (MHz) x 100divided byCenter Frequency (MHz) Example:A 3 section HQ with a center frequency of 400 MHz and a 3dB BW of 40 MHz would have,1.5 x 3.5 / 10 = 5.25 / 10 = 0.525 0.525 + 0.2 = 0.8 dBConnectors Available on HQ Series:Lark Code Type C DIM.Inches & MMLarkCodeType C DIM.Inches & MMA SMA JACK.800 & 20.3G N JACK 1.625 & 41.3B SMA PLUG.855 & 22.5H N PLUG 1.585 & 40.3C TNC JACK 1.350 & 34.3L SOLDER MPINAXIAL.625 & 15.9D TNC PLUG 1.280 & 32.5*M SOLDER PINRADIAL.625 & 15.9E BNC JACK 1.350 & 34.3S SPECIALF BNC PLUG 1.280 & 32.5*Not recommended for use with this series.LENGTH:The approximate length of a Lark HQ series filter can be determined by the formula:( 0.5 N + 2 / %BW ) x LC = LWhere N is the number of sections used, % BW is:3dB BW (MHz) x 100divided byCENTER FREQUENCY (MHz)LC is the length constant at the specified center frequency, L is the dimension between theconnectors; C1 and C2 are the connector lengths as shown above. All of the length information given here is approximate. Exact length specifications must be quoted by the factory. If a special length is needed,please submit all of your requirements - both electrical and mechanical. This will enable Lark Engineering to quote the optimum design for your application.Example:A 3 section HQ with a center frequency of 400 MHz a 3dB BW of 40 MHz and SMA jack input and output connectors would be:(1.5 + 0.2) x 1.38 = 2.35 + C1 + C2In most cases, the L dimension is rounded to the nearest 1/4 inch which in this instance would be 2.25inches and the O.A.L. is:2.25 + .800 + .800 =3.85 inches.To convert inches to millimeters multiply x 25.40.Lark Engineering HQ SERIES元器件交易网STOPBAND ATTENUATIONThe graph on the following pages defines the normal specification limits on attenuation Lark bandpass filter series HP, HQ, SF, and SM. The minimum level of attenuation in dB is shown as a "number of 3dB bandwidths from center frequency".Since the frequency characteristics vary for differing bandwidths, it is necessary to establishspecifications for each bandwidth of filter. The different graphs represent various 3dB percentage bandwidths. Intermediate values should be interpolated. The 3dB percentage bandwidth is defined asfollows:STOPATT5.HTM元器件交易网As the 3dB bandwidth is exactly 10% of the center frequency, the answer can be read directly from the 10% graph. Using the 5 section curve at the point -1.5 (255 MHz) we find the minimum level of attenuation is 36dB. At +1.6 (348 MHz) the minimum level of attenuation is 48dB.For special requirements, please contact our Application Engineering Department.STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPATT5.HTM元器件交易网STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPBAND ATTENUATION。
3535 N302B7 产品规格书说明书
产 品 规 格 书 Product Specification文件编号 Document number WE-WI-RD-962 版本版次Version editionA/0产品名称 Product name 3535内封ICN302B7产品规格Product specificationWE-3535AY0203Z-001文件编制 Documentation 马明海 批准发行Approved issue马小其客户服务 Custormer Service 联系电话 Contact number客户名称 Customer name 样品编号 Sample number产品验证 Product verification批准承认 Recognition approval注： 1.此规格书以中英文方式书写，若有冲突以中文版文本为准。
/This specification is written in both Chinese and English. In case of conflict, the Chinese version shall prevail.2.此规格书的最终解释权归由本公司。
/The final interpretation of this specification shall be vested in the company.目 录Catalog0.0、封面/co ver ..........................................................................第1页page 10.1、目录/Catalog ......................................................................... 第2页page 21、产品概述/Product Overview ..............................................................第3页page 32、功能特点/Functional characteristics.....................................................第3页page 33、应用领域/Application area ..............................................................第3页page 34、外观描述 /Appearance description ......................................................第4页page 45、封装尺寸/Size .........................................................................第4页page 46、脚位图/Foot map .........................................................................第5页page 5第5页page 5 7、最大额定值/MaximumRating ............................................................第6页page 6 8、推荐工作范围/Recommended scope ofwork .................................................9、电气参数/Electrical parameters..........................................................第6页page 610、开关特性/Switching第7页page 7 characteristics.....................................................11、内置LED参数/Built-in LED parameters..................................................第7页page 712、功能说明/Description of functions......................................................第7页page 713、恒流曲线/Constant-current第10页page 10 curve........................................................14、应用线路图/Application Route Diagram..................................................第10页page 1015、使用注意事项/Precautions ............................................................第11页page 111、产品概述/Product Overview：N302B7-3535RGB是一款集成高质量单线级联恒流驱动IC N302B7和高质量RGB LED芯片的外控恒流3535集成灯珠。
FL-3535-F中文资料
Байду номын сангаас
Optoway
1310 nm LASER DIODE MODULES
UNCOOLED MQW-FP LD WITH RECEPTACLE FEATURES ² 1310 nm typical emission wavelength ² High reliability, long operation life ² High temperature operation without active cooling ² Build-in InGaAs monitor APPLICATION Trunk Line, FitL DESCRIPTION
□
Flange 1.25 Gbps 2.5 Gbps Pin Assignment Type A Type B Type C Code Blank S Isolator No Single-Stage
Pout (mw) 0.2 0.5 1 2
Code S SB F FB T
Connector Type SC/PC SC/PC (Board Mount) FC/PC FC/PC (Board Mount) ST/PC
ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25 °C)
Symbol Ith VOP Pf Parameter Threshold Current Operating Voltage Optical Output Power Part No:FL-350X FL-351X FL-352X FL-353X Center Wavelength Spectral Width Rise And Fall Times CW CW, IF=Ith+20mA CW, IF=Ith+20mA 0.2 0.5 1.0 2.0 1290 1310 1 1330 3 0.3 100 0.1 ±1.0 mW Test Conditions Min. Typ. 12 1.2 Max. 15 1.5 Unit mA V
PC354中文资料
of
元器件交易网
SHARP CORPORATION
ED-94(
1. Application This specification applies Model No. PC354. to the outline and characteristics of p
2. Outline Refer to the attached drawing No. CY6488KO2.
元器件交易网
SHARP CORPORATION
2. Outline i
0
.
c @
3.6kO. 3
;
2.54kO.25
i / Date code
Pin Nos. and internal connection diagram
Sharp mark “S”,
\,
1
Model No. \ Primary side mark \
元器件交易网
PREPARED BY: DATE:
SHA
APPROVED
BY: DATE: ELECTRONIC COMPO GROUP SHARP CORPORATION
I SPEC.
No.
ED-9466 October
1B 29. 1999
SPECIFICATION
DEVICE SPECIFICATION FOR Business
6.5 This product 6.6 This product This product This product 6.7 ODS materials
is AC input
type. against irradiation. input and output. diode.
聚丙烯绳索标准大全
前
言
本标准非等同采用国际标准 ISO1346：2012《纤维绳索--3 股、4 股、8 股和 12 股聚丙烯 撕裂薄膜、单丝和 PP2 复丝和 PP3 高韧度聚丙烯绳索》（英文版）
请注意本标准的某些内容有可能涉及专利。本标准的发布机构不应承担识别这些专利的责 任。
线密度 bc
最低断裂强力 de kN
薄膜、单丝和 PP2 复丝
高韧度 PP3 复丝
指标值
偏差
两端插接
两端插接
ktex
%
未插接 了眼环的 未插接 了眼环的
绳索
绳索
4
7.23
2.80
2.52
3.15
2.84
4.5
9.15
3.55
3.20
4.00
3.60
5
11.3
±10
4.25
3.83
4.75
4.28
6
16.3
纤维绳索 ISO 1346-L-60-PP2
5 通用技术要求
5.1 聚丙烯绳索应为下列四种类型： --- A 型 3 股拧绞绳（见图 1）
--- B 型 6 股拧绞绳（见图 2） --- L 型 8 股编绞绳（见图 3） --- T 型 12 股编绞绳（见图 4）
图 1 3 股拧绞绳（A 型）形状
纤维绳索--3 股、4 股、8 股和 12 股聚丙烯 撕裂薄膜、单丝和 PP2 复丝和 PP3 高韧度聚丙
烯绳索
Fibre ropes — Polypropylene splitfilm, monofilament and multifilament(PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and12-strand ropes