Specification Sheet for UFO LED highbay
SM3257ENBA_Datasheet_v1.0
Table of Contents
1. Overview ............................................................................................................................................ 5 1.1 Product Description ................................................................................................................... 5 1.2 Key Features ............................................................................................................................. 5 1.3 Block Diagram ........................................................................................................................... 7 Pin Assignments and Signal Descriptions ..................................................................................... 8 2.1 Pin Assignments ........................................................................................................................ 8 2.2 Signal Descriptions .................................................................................................................. 10 Electrical Characteristics ............................................................................................................... 12 3.1 DC Characteristics................................................................................................................... 12 3.2 Flash Interface AC Characteristics .......................................................................................... 13 3.2.1 Traditional NAND Mode ............................................................................................ 13 3.2.2 Toggle Mode ............................................................................................................. 16 Package Information ....................................................................................................................... 20 4.1 48-Pin LQFP Package Outline ................................................................................................ 20 4.2 48-Pin TQFP Package Outline ................................................................................................ 21 4.3 40-Pin QFN Package Outline .................................................................................................. 23 4.4 Top Marking............................................................................................................................. 24 Product Ordering Information........................................................................................................ 26
负离子健康香薰机产品说明的英文翻译
AiCheShi Anion Health Aromatherapy MachineAiCheShi car accessories limited is a high technology enterprise in Shenzhen China, the company is engaged in active oxygen products, anion health aromatherapy machine ，protective air quality as well as on air environmental testing and so on. we can ODM and OEM car inner accessories ,and has the independent intellectual property rights, the success development produces is widely used in the family, catering and entertainment , the leisure place, the hotel guesthouse, the public places. it has been adhering to the " your health continuously my pursue, creating the green environmental health world " for our company philosophy.AiCheSHi anion health aromatherapy machine through ultrasonic vibrations generated by high-frequency electronic shock, water molecules break down plant essential oils and dissolved into nano-distributed in the surrounding air, cold fog, scent filled the air. Essential oils from flowers, leaves, stems and roots of the plants or fruits, high concentrations of volatile flavor compounds of refining extraction, is the essence of natural plants. Plant essential oil molecules small volatile high, nasal airway into the body, emotional control other major functions of the body, can enhance the physical and psychological functioning. Every kind of plant essential oil is different, also makes a special set of functional characteristics. The volatile oil has “West's Chinese native medicine” the name, but also may seep through the skin enters the blood circulation, can the effective recuperation body, achieve functions and so on.After heated in winter or summer, there is air-conditioned indoor air dry lips will appear dry mouth, throat, dry pealing harder dry cough, skin,nose bleeding, etc. " heating dry" symptoms, aromatherapy machine using a variety of ways to make 38,480 water atomization, maintaining a relatively high humidity, and produce a significant number of natural negative oxygen ion and can be treated and alleviate influenza epidemic diseases, hypertension, bronchitis, and the nervous system, cardiovascular system and body metabolism play a protective role. Aromatherapy is a stylish, a culture, is indispensable to the pursuit of a high fashion taste life. The product adopts European and American fashion, unique and graceful, elegant and stylish, elegant lines, size, color matched with gentle and beautiful. Brand new ABS environmental protection materials, direct use of hi-tech environmental protection as the main energy-efficient materials, outer 5V power, simple operation and easy to use, for displaying an appropriate location. You can do art or craft are placed in the car, room, office, leisure entertainment places.F unction illustration (patent product)一．S pecification1.Model No.: UFO-9882.power: 5 V external power supply3.Power consumption: more than 0.6 w4.Anion concentration: 3000000 PCS/cm35.Ozone concentration: more than 0.02 PPM6.Add the moisture content: 12 ml/h7.Machine size: ф 130 x 30 (mm)8.Machine net weight:120 g9.Machine capacity: 100 ml10.Applicable area: 3 ㎡-20 ㎡11.Suitable for: car, home, office, entertainment, etc二．Functions1.Supplements the anion: The anion by the reputation is “the air Vitamin” “the longevity element”.The air anion can during the direct action Yu Ren central nervous system and the blood circulation, improves the human brain function effectively, the enhancement organism immunity encourages, to enter metabolism, the adjustment nerve function, eliminates the human body to be weary.2.Sterilization: The anion can suppress the bacterium, the viral growth. The pure natural plant volatile oil may get up the purification air, the disinfection, the sterilization effect, simultaneously prevents some communicable disease.3.Dust removal: The anion has the greatly strengthened dust collection. The air anion is very easy to adsorb the smog, the dust and so in the suspended particle with the belt positive electricity particle generation neutralization, causes it precipitation landing, receives eliminates smoke and dust, effect of the crisp air.4, Recuperates the body: The pure natural plant volatile oil has “West's Chinese native medicine” the name, enters the brain after the sense of smell nerve, may stimulate the cerebrum anterior lobe to secrete in fei selects and the brain fei selects two kind of hormone, causes the spirit to present the most comfortable condition. Also may seep through the skin enters the blood circulation, can the effective recuperation body achieve and so on the functions affably5, Health care physical th erapy: The plant volatile oil is known as “the plant hormone” the name, may strengthen physiological and the psychological function. Many volatile oil nature and the human body hormone is same, has the vital role tothe human body. The volatile oil all very much has the help to many diseases, the coordinate medicine treatment, may let disease restore quickly6, Fresh air: Natural plant extract plant fine oil material pure, temperate, fragrant joy person, has effect of the fragrant therapy, in the effective purification vehicle, lives at home, place air and so on work, leisure entertainment, causes the air fresh pleasant.三．Product characteristics:1, Highly effective: The sterilization, eliminates the taste, the dustremoval, dispels the poison, the smoke abatement, supplements “the air Vitamin” - - the anion2,Simple: Portable, easy to operate.3.Consumes energy lowly: Uses for month-long the power consumption not to surpass 3 kwh electricity.4.Coverage area: product effective coverage area of about 20 square metres .5.Cleaning speed: purification using natural circulation, purify quickly.6.Stable operation is safe and reliable.7.The size is petite and has attractive appearance.8.Adapt site: car, home, restaurant and entertainment, Office, and so on.四User manualProduct descriptionPlaced in aromatherapy Fluid: The inlet gently remove the plastic cover, water dripping from direct will use aromatherapy liquid injection liquid inlet, attention cannot be wet aromatherapy machine of shell-oriented, lavender liquid capacity of 100 ml, and then sealed withplastic.2.After pours into the fragrant liquid, places fragrant machine the skid prevention to fill up evenly the place in the suitable position, the prohibition inversion, in order to avoid the liquid seeps out to influence the electric circuit working.3.Five LED Indicator 1 for a red power indicator. blue lights timer 4 respectively 0.5 -hour, 1 hour, 2 hours and 3 hours. three buttons are power switch, timer switches adjust volume and size nebulizers switch. Product Description (see figure)4.When filled with aromatic liquid, this product can be 8 hours of continuous work, keeping against work without water. When the tanks of anhydrous, emitted spray fog-free, if you continue to use, please cut off the electricity, to water tanks joined the negative ion healthy again .5. In the long time non-work condition, please power off, unplug it. Atomization due to a long time did not use blocking not working properly, edible white vinegar at several points on atomization of spray drops on-chip, a minute later will be able to work.6.When the indoor temperature is lower than 0 degrees water tanks ice up, please do suspend uses, in order to avoid the silk waste postglacial deposits cause the original component the damage.。
格天光电3030LED规格书
Reverse Voltage 反向电压
Symbol / 符号 IF Tj Topr Tstg ~ ~
Value / 数值 150 115 -40~+60 0~+60 ±2,000V HBM -5
5.Electrical Characteristics Curve 电性特征曲线图(Tj = 25˚C)
5-1.White,Royal Blue , Blue, Green 白光、深蓝光、蓝光、绿光
5-2. Amber, Red 黄光、红光
正
正
向
向
电
电
流
流
Forward Current (mA)
Forward Current (mA)
IFP
1000
Unit / 单位 mA ℃ ℃ ℃ ~ mV/℃
mA
VR
Not designed for reverse operation
禁止反向驱动
Notes 注释： . Tolerance of Luminous Flux is ±3%. 光通量的公差为±3%。 2. Tolerance of Forward Voltage is ±0.1V. 正向电压的公差为±0.1V。
第 3/9 页
Parameters 参数
Electrical-Optical Characteristics at IF=150mA，Ta=25℃ 光电特性 IF=150mA Ta=25℃
Parameter 参数 Luminous Flux / 光通量 Correlated Color Temperature 相关色温 CRI / 显色指数 Forward Voltage / 正向电压 Power Dissipation / 耗散功率 View Angle / 发光角度 Thermal Resistance / 热阻
西锐LED照明灯具使用手册说明书
PLEASE READTHIS USER GUIDE BEFORE INSTALLING, OPERATING OR PERFORMING MAINTENANCE ON THE ILLUMINATOR UNIT PRODUCT USER GUIDESirius Illuminator RangeE357731Rev: C3Thank you for purchasing this UFO illuminator/luminaire.To ensure that the illuminator is set up optimally and gives a long service life, please read this user guide before installing, operating or performing any maintenance on the unit.Please keep this User Guide for future reference. This User Guide is laid out in three sectionsInstallation -details on how to connect your luminaireOperation - details how to programme and set up your luminaireMaintenance - maintenance log, troubleshooting guide, technical specificationMODELS COVERED BY THIS USER GUIDEUFOSIRCW UFOSIRCW-C UFOCIRCW-T UFOSIRCW-Cs UFOSIRCW-TsUFOSIRSW UFOSIRSW-C UFOSIRSW-T UFOSIRSW-Cs UFOSIRSW-TsUFOSIRNW UFOSIRNW-C UFOSIRNW-T UFOSIRNW-Cs UFOSIRNW-TsUFOSIRWW UFOSIRWW-C UFOSIRWW-T UFOSIRWW-Cs UFOSIRWW-TsUFOSIRGW UFOSIRGW-C UFOSIRGW-T UFOSIRGW-Cs UFOSIRGW-TsUFOSIRGW27UFOSIRGW27-C UFOSIRGW27-T UFOSIRGW27-Cs UFOSIRGW27-Ts IMPORTANTThis product must be installed in accordance with the applicable installation code, by a person familiar with the construction and operation of the product, and the hazards involved.These illuminators are not mains dimmable.The LED array and heatsink in this illuminator can be replaced when it reaches end of life. Contact UFO for details.Type Y Attachment: If the external flexible cable or cord of this luminaire or associatedPSU/driver is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person to avoid a hazard.Location: Do not locate this illuminator closer than 200mm from any flammable surface.Clearance / Ventilation: It is imperative that a gap of 200mm is left around the unit. This is to allow air to circulate and prevent overheating. The location must have free ventilation and must not have an ambient temperature higher than that specified for the luminaire.Mounting: This luminaire comes with an integral mounting plate for securing the unit to a vertical or horizontal surface. Refer to the instruction sheet supplied with the plate. Warning: Never look directly at the luminaire through the fiber port of the illuminator. Warning: The luminaire should be positioned so that prolonged staring into theluminaire at a distance closer than 2.7 metres is not expected.23UFO LIGHTING1. Manual dimming - local and remote2. No sensor, manual decorative wheel control (wheel speeds 0.5rpm, 1.2rpm, 2.4rpm, 4rpm, 7.5rpm and stop), stop on random color3. Sensor, manual decorative wheel control (wheel speeds 1.6rpm, 2.6rpm, 3.75rpm, 5.5rpm and stop), stop on 1 color4. DMX dimming5. No sensor - DMX decorative wheel control, adjustable speed from stop up to 7.5rpm + LED and fan on/off6. Sensor - DMX decorative wheel control, snap colors andadjustable speed from stop up to 7.5rpm + LED and fan on/off 7. No sensor - 0-10v decorative wheel control, adjustable speed from stop up to 7.5rpm - channel 1 (receiving)8. Sensor - 0-10v decorative wheel control, snap colors andadjustable speed from stop up to 7.5rpm - channel 1 (receiving)9. 0-10V dimming – channel 2 (receiving) - two versions, standard and emergency lightThe Sirius is a 90W white light LED illuminator with optional decorative wheel capability. The Sirius LED illuminator driver PCB has all the control functionality fitted as standard. The following control functionality and configurations are available.MODEL TYPESThe Sirius LED illuminator incorporates a range of LED arrays focussed through a series of static lenses to provide optimum display and illumination within the following optical range.MODEL TYPES [CONT ]SIRIUS RANGE USER GUIDE4CONNECTIONS AND CONTROLS OVERVIEW0-10VDIMMING DMX 24V DC INPUT MANUAL DIMMINGMANUALDMX ADDRESS AND CONTROLMOUNTING FEETThe illuminator is supplied with non-slip rubber feet pre-fitted the base of the unit. Alsoin the box there are 2 x user fixable mounting brackets which allow for the illuminator tobe securely mounted to a wall or other surface if necessary.To fit these feet, remove the 4 rubber feet from the base of the unit and retain the screws.The wall mounting brackets are supplied as a pair - one left and one right hand. Positionthe brackets over the holes that have been left empty by the rubber feet and fix in placewith the removed screws.The illuminator can now be fixed to the mounting surface.5SIRIUS RANGE USER GUIDE6CONNECTION - FOR LOCAL MANUAL OPERATIONThere are 2 connections required – the fiber port and the mains supply cable. The fiber port should be connected first. Connect and secure the fiber optic connector into the collar and secure using the M5 locking screw.Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the PSU. Plug the mains plug into the electrical supply socket. Switch on power. The LED Indicator on the PSU will illuminate and the illuminator is ready for use. If no light is produced consult the TROUBLESHOOTING section of this user guide.CONNECTION - FOR LOCAL MANUAL OPERATION There are 3 connections required – the fiber port, the remote dimmer cable and the mains supply cable. The fiber port should beconnected first. Connect and secure the fiber optic connector into the collar and secure using the M5 locking screw. Connect the RJ45 connector on the end of the remote dimmer cable as detailed below into the right hand RJ45 socket (0-10V dimming) on the side of the illuminator.Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the PSU. Plug the mains plug into the electrical supply socket. Switch on power. The LEDIndicator on the PSU will illuminate and the illu-minator is ready for use. If no light isproduced consult the TROUBLESHOOTINGsection of this user guide.7There are 3 connections required – the fiber port, the mains supply cable and the DMX cables. The fiber port should be connected first. Connect and secure the fiber optic connector into the aluminium collar and secure using the M5 locking screw.Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the PSU. Plug the mains plug into the electrical supply socket. Switch on power. The LED Indicator on the PSU will illuminate and the illuminator is ready for use. If no light is produced consult the TROUBLESHOOTING section of this user guide.Connect to the 3 pin XLR sockets on the side panel as detailed below using an approved DMX cable.Only approved DMX cables should be used.Always “daisy chain” a DMX universe. Never use a T joint in a DMX universe unless using an approved interface.It is always recommended that the last illuminator output in the DMX universe or cable run be terminated with a 120 ohm resistor across DMX+ and DMX-.SIRIUS RANGE USER GUIDE8There are 3 connections required – the fiber port, the mains supply cable and the 0-10V cable. The fiber port should be connected first. Connect and secure the fiber optic connector into the aluminium collar and secure using the M5 locking screw.Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the PSU. Plug the mains plug into the electrical supply socket. Switch on power. The LED Indicator on the PSU will illuminate and the illuminator is ready for use. If no light is produced consult the TROUBLESHOOTING section of this user guide.Connect the 0-10V RJ45 as detailed below using CAT5 cable.Note : for emergency light functionality, the mains supply for the illuminator must bemaintained so that failure of the mains supply to the 0-10V controller will result in the illumina-0-10V RJ45 Connections:-VE RJ45 Brown/White (Pin 7) +VE RJ45 Blue/White (Pin 5)POWER SUPPLY REQUIREMENTSThe LED illuminator is powered from a 24V DC PSU/Constant Voltage SELV LED driver.The driver caters for UK/European/other mains supplies using the relevant power cord supplied.9UFO LIGHTINGLOCAL WHITE LIGHT DIMMINGAll Sirius models in the range can be manually controlled as detailed in the following sections.Note: For all manual operation modes, dip switch 10 must be set to on.During normal manual white light operation, the illuminator can be dimmed from 0 to 100% using the manual dimming control on the side panel.EMERGENCY WHITE LIGHT DIMMINGDuring normal manual white light operation the emergency light configured illuminator can be dimmed from maximum light at 0%, to no light at 10% then again up to maximum light at 100% using the manual dimming control on the side panel.DECORATIVE COLOR OR TWINKLE WHEEL CONTROL - WITHOUT SENSORDuring normal manual decorative operation the illuminator can be dimmed from 0 to 100% using the manual dimming control and the motor can be controlled from stop to 5 speeds (see table below) using the push button manual motor control on the side panel.Note: When manually selecting stop (switch position 6) the decorative wheel will stop instantly on a random color (color wheel) or a random section of the twinkle wheelREMOTE WHITE LIGHT DIMMINGDuring remote manual white light operation, the illuminator can be dimmed from 0 to 100% using the remote dimming control.Note : For remote manual dimming operation, dip switch 10 on the illuminator must be set to on and the local manual dimming control on the side of the illuminator must be turned to mini-mum (fully counter clockwise)SIRIUS RANGE USER GUIDE10DECORATIVE TWINKLE WHEEL CONTROL - WITH SENSORDuring normal manual decorative operation the illuminator can be dimmed from 0 to 100% using the manual dimming control and the motor can be controlled with stop + 4 speeds ranging from very slow to fast using the push button manual motor control on the side panel.Note: For this configuration the twinkle wheel is supplied with a cut out segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and forwards either side of the segment. When stop is selected the wheel will come to rest at the segment giving unobstructed white light output.DECORATIVE COLOR WHEEL CONTROL - WITH SENSORDuring normal manual decorative operation the illuminator can be dimmed from 0 to 100% using the manual dimming control and the motor can be controlled from stop to 4 speeds (see table below) using the push button manual motor control on the side panel.Note: When manually selecting stop (switch position 5) the decorative wheel will automatically return to color 1 (normally white)DMX OPERATIONEach Sirius occupies 3 DMX channels• Channel 1 dimming• Channel 2 decorative wheel control • Channel 3 LED and fan ON/OFF controlDecorative wheel DMX functions are different depending on decorative model. More details on individual DMX channels and values are provided in the following DMX tablesNote : For ALL DMX operations, DIP switch 10 on the illuminator must be set to off, the correct DMX address must be set (switches 1-9) and the XLR plug(s) must be plugged into the XLR sockets on the side panel.11LIGHTINGSETTING THE DMX ADDRESSBecause the Sirius occupies 3 DMX channels, when setting addresses on multiple illuminators the addresses must be selected to give 3 channel separation. For example, if the first address is 009, the next address must be at least 012, the next address must be at least 015 and so on. Any illuminators with the same address will operate identically under DMX control.The DMX address is set manually using the DIP switch on the side panel of the Sirius. Each DIP switch number (1 to 9) represents a binary number which when added together make up the DMX address as shown in the table below.WHITE LIGHT DIMMINGThe illuminator can be dimmed on DMX channel 1 and controlled on DMX channel 3 as detailed in Table A. DMX Channel 2 is redundant.Alternatively use the online calculator from link below: /calc.aspSIRIUS RANGE USER GUIDE12The Illuminator can be controlled as detailed in Table ASIRIUS DMX CHANNELS - TABLE AEach Sirius occupies 3 DMX channels as detailed below.DECORATIVE COLOR OR TWINKLE WHEEL CONTROL - WITH SENSORFor this configuration of a decorative wheel with sensor:• The Twinkle wheel has a cut-out segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and forwards either side of the cut-out segment. When stopped the wheel will return to the cut-out segment and display unobstructed white light • The color wheel when stopped will return to color wheel segment 1 (normally white) The Illuminator can be controlled as detailed in Table B for Color Wheel with sensor and Table C for Twinkle Wheel with sensorDECORATIVE COLOR OR TWINKLE WHEEL CONTROL - NO SENSORFor this configuration of a decorative wheel without sensor:• The Twinkle wheel is solid with no cut out segment. The wheel in motion will give a continu-ous twinkle effect. When stopped the wheel will remain in front of the LED array giving an ob-structed white light output• The color wheel when stopped will display the color where it stoppedThe illuminator decorative wheel can be controlled on DMX channel 2 as shown in table A.SIRIUS DMX CHANNELS - TABLE BEach Sirius occupies 3 DMX channels as detailed below.13 LIGHTINGSIRIUS DMX CHANNELS - TABLE CEach Sirius occupies 3 DMX channels as detailed below:14SIRIUS RANGE USER GUIDE15UFO LIGHTINGSTANDARD WHITE LIGHT DIMMINGOnce the Sirius illuminator has been set up and connected as detailed above the illuminator can be dimmed from 0 (0 Volts DC) to 100% (10V DC) with a receiving 0-10V signal.EMERGENCY WHITE LIGHT DIMMINGOnce the Sirius illuminator has been set up and connected as detailed above the illuminator can be dimmed with a receiving 0-10V signal as detailed in the table below:Note: In this configuration when the mains supply to the 0-10V controller fails, the illuminator will illuminate fully as an emergency light.For ALL 0-10V operation control DIP switch 10 on the Sirius illuminator side panel must be set to ON and in addition:• For 0-10V dimming the Manual Dimming Control on the Sirius illuminator side panel must be set to minimum (fully counter clockwise) and the RJ45 plug must be plugged into the right hand (0-10V dimming) RJ45 socket on the side panel.• For 0-10V decorative wheel control the Manual Motor Control on the Sirius illuminator side panel must be set to STOP and the RJ45 plug must be plugged into the left hand (0-10V motor.SIRIUS RANGE USER GUIDE16DECORATIVE COLOR OR TWINKLE WHEEL CONTROL - WITH SENSOROnce the Sirius illuminator has been set up and connected as detailed above the illuminator decorative wheel can be controlled with a receiving 0-10V signal as detailed in the following table:DECORATIVE COLOR OR TWINKLE WHEEL CONTROL - NO SENSOROnce the Sirius illuminator has been set up and connected as detailed above the illuminator decorative wheel can be controlled with a receiving 0-10V signal from stop at 0V to 7.5rpm at 10VNote: For this configuration the twinkle wheel is solid without a cut out segment.DECORATIVE TWINKLE WHEEL CONTROL - WITH SENSOROnce the Sirius illuminator has been set up and connected as detailed above the illuminator decorative wheel can be controlled with a receiving 0-10V signal to give stop (0V DC) to varying speeds (0.5 to 10V DC) ranging from very slow to fast.Note: For this configuration of a twinkle wheel with sensor, the wheel is supplied with a cut out segment. The wheel in motion will give an uninterrupted twinkle by rotating backwards and for-wards either side of the segment. When 0V is selected the wheel will come to rest at the segment giving unobstructed white light output.MAINTENANCELOGMAINTENANCE17 LIGHTINGTROUBLESHOOTINGSIRIUS RANGE USER GUIDE18[1] - white light manual dimming version / [2] - decorative manual motor version / [3] - DMX only [4] - decorative or dimming 0-10V control / [5] - dimming 0-10V control / [6] - 0-10V controlTECHNICAL SPECIFICATION19UFO LIGHTINGDESIGNSPECIFYBUILDINSTALLUnited Kingdom •United States • Germany •Europe • UAEUFO Licht GmbH\ Gutenbergstraße 185737 Munchen \ Deutschland+49 (0)9491 955880 www.ufo-licht.deUniversal Fiber Optics USA LLC\\Universal Fiber Optics Ltd \\。
H2S-C-50
2TYPE H2S/C-50PERFORMANCE CHARACTERISTICSCROSS-SENSITIVITY DATA Interfering GasConcentrationReadingCO 100 ppm 0.4 ppm SO 2 100 ppm ~ 20 ppm NO 35 ppm < 2 ppm NO 2 5 ppm ~ - 1 ppm H 2 10’000 ppm < 5 ppmPerformance data conditions: 20 °C, 50% RH and 1013 mbarAPPLICATIONSContinuous Air Quality Monitoring Safety and Environmental Control PHYSICAL CHARACTERISTICSBOTTOM VIEWSIDE VIEWCompact-Size Outline DimensionsNominal Range 0 – 50 ppm Maximum Overload500 ppm Expected Operation Life 2 years in airOutput Signal 1’700 ± 300 nA/ppm Resolution0.05 ppm Temperature Range - 40 °C to 50 °CPressure Range Atmospheric ± 10% Pressure Coefficient No data T 90 Response Time< 35 secRelative Humidity Range 15 % to 90 % R.H. non-condensing Typical Baseline Range (pure air, 20°C)0 – 0.1 ppm Maximum Zero Shift (+20°C to +40°C)0.1 ppmExpected Long Term Output Drift< 2% signal loss/month Recommended Load Resistor 10 OhmBias Voltage Not recommended Repeatability < 2 % of signal Output Linearity LinearWeight~ 13 g Position Sensitivity NoneStorage Life12 months in container Recommended Storage Temperature 5 °C – 20 °C Warranty Period 12 months from date of dispatch2TYPE H2S/C-50TEMPERATURE DEPENDENCEThe output of an electrochemical sensor varies with temperature. The graphs below show the variation in output with temperature for this type of sensor. The results are shown in the graphs as a mean for a batch of sensors, along with confidence intervals corresponding to ±3 times the standard deviation. The sensitivity dependence is expressed as a percentage of the signal at 20 °C. The shift in bas eline is shown in ppm referenced to 20 °C.The data contained in this document is for guidance only. Membrapor AG accepts no liability for any consequential losses, injury or damage resulting from the use of this document or the information contained within it. The data is given for guidance only. Customers should test under their own conditions, to ensure that the sensors are suitable for their own requirements.。
字母词及其规范化研究
本科毕业论文(设计)字母词及其规范化研究—以第六版《现代汉语词典》收录的字母词为例毕业论文(设计)作者声明1．本人提交的毕业论文(设计)是本人在指导教师指导下独立进行研究取得的成果。
除文中特别加以标注的地方外，本文不包含其他人或其它机构已经发表或撰写过的成果。
对本文研究做出重要贡献的个人与集体均已在文中明确标明。
2．本人完全了解湖南第一师范学院有关保留、使用学位论文的规定，同意学院保留并向国家有关部门或机构送交本文的复印件和电子版，允许本文被查阅、借阅或编入有关数据库进行检索。
同意湖南第一师范学院可以采用影印、打印或扫描等复制手段保存和汇编本文，可以用不同方式在不同媒体上发表、传播本文的全部或部分内容。
3．湖南第一师范学院在组织专家对毕业论文(设计)进行复审时，如发现本文抄袭，一切后果均由本人承担，与学院和毕业论文指导教师无关。
作者签名：日期：二Ｏ一年月日摘要字母词作为汉语系统中的一种新兴的词汇现象，越来越引起人们的关注。
UFO、SOS、DNA、NG、WC、GPS、CCTV、IC卡等形式的词,已经得到广泛使用。
字母词的使用不仅关涉汉语的规范和发展，也涉及汉语交流和理解。
因此，我们得承认字母词的存在具有其价值，不能盲目地滥用字母词，但要对字母词的使用进行规范化。
本文主要从字母词的界定、字母词的分类、字母词的汉化及构成方式、字母词在使用中存在的问题、字母词的规范化等方面对字母词进行系统而深入地分析、探讨和研究。
本文以第六版《现代汉语词典》收录的字母词作为实例，进行分析和研究，这可以使我们进一步地认识字母词，并了解字母词的动态发展，进而与时俱进地对字母词进行规范，并探索出一条合理而现实的字母词的规范之路，使人们对字母词有一个较为系统和全面的认识，从而更好地指导大众语言实践。
关键词：字母词；界定；分类；汉化；构成方式；规范化ABSTRACTLetter words as an emerging vocabulary phenomenon in the Chinese system, more and more cause for concern. The UFO, SOS, DNA, NG, WC, GPS, CCTV, IC card and other forms of words, has been widely used. Letter word used not only concerned in the specification and development of the Chinese, but also involves the communication and understanding of Chinese. Therefore, we have to admit the existence of the letters the word has its value can not be blindly abuse letter word, but to normalize the use of the word of letters. In this paper, the definition of the word from the letters-letter word classification, localization and constitute letter words. Wu will discussion and study letter words exist in the use of standardized letter word letter word system and in-depth analysis. In this paper, the sixth edition of the "Modern Chinese Dictionary" included letter words as an example, analysis and research, which allows us to further understanding of the letter word, and understand the dynamic development of the letter words, and then times letter word norms, and to explore the road to the specification of a reasonable and realistic letter word, letter words have a more systematic and comprehensive understanding of the people, in order to better guide the practice of public language.Key words: letter word; defined; classification; Chinese localization; constitute; standardization目录摘要 (I)Abstract (II)引言 (1)一、字母词的界定 (1)二、字母词的分类 (3)（一）来自于外语的字母词 (3)1.外文纯字母词 (3)2.外文字母与汉语词(语)素类组合 (4)3.外文字母与数字组合 (4)（二）来自于汉语的字母词 (4)1.来自于汉语拼音的纯字母缩略语 (4)2.利用汉语拼音新造的带汉字的字母词语 (5)三、字母词的汉化及构成方式 (5)(一)字母词的汉化 (5)1.在汉语词汇系统中，字母词是非量化名词 (5)2.字母词的语法功能 (5)（二）字母词的构成方式 (6)1.纯首字母缩略 (6)2.语素化 (6)3．义项归并 (7)四、字母词使用存在的问题 (7)（一）字母词在语言生活使用中存在的问题 (7)1.字母词在报纸、广播、电视等媒体上的滥用 (7)2.字母词在网络语言应用中存在的问题 (8)(二) 大量使用字母词的弊端 (8)1．影响民族语言的纯洁性 (8)2．不利于科学技术的推广 (9)3．容易使人误解 (9)五、字母词的规范化 (9)（一）字母词的规范原则 (9)1.包容性原则 (9)2.普遍性原则 (9)(二)字母词规范化的建议 (10)1.科技术语字母词规范建议 (10)2.公文写作中字母词的规范建议 (11)3.网络中使用的字母词规范建议 (11)结语 (12)参考文献 (13)致谢 (14)引言美国语言学家爱德华·萨丕尔说:“语言，像文化一样，很少是自给自足的。
ASTM_B标准号中英文对照
黄铜板、薄板、带材及轧制棒材
Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B37-03
钢铁制造用铝
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
B19-01
弹药筒用黄铜片、带、板、棒和圆盘(坯料)
Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks)
B21/B21M-01e1
海军黄铜条材、棒材和型材
Standard Specification for Naval Brass Rod, Bar, and Shapes
B39-79(2004)
镍
Standard Specification for Nickel
B42-02e1
无缝铜管尺寸
Standard Specification for Seamless Copper Pipe, Standard Sizes
B43-98(2004)
无缝红铜管尺寸
Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B66-95(2003)
蒸汽机车易损零件用青铜铸件
Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
B68-02
白光贴片LED灯珠-1204贴片LED灯珠规格书
Test time=1000HRS(-24HRS,+72HRS)
Connect with a power IF=15mA
5
Operating Life Test
Ta=Under room temperature
Test time=1000HRS(-24HRS,+72HRS)
-40±5℃→100±5℃
IFP
100
mA
DC Forward Current
IF
25
mA
Reverse Voltage
VR
5
V
Operating Temperature Range
Topr
-40℃～85℃
℃
Storage Temperature Range
Tstg
-40℃～100℃
℃
* IFP condition: pulse width ≤1ms ,duty cycle ≤1/10
6
Thermal Shock
(15min，15min) 100 Cycles
20
0/1
20
0/1
20
0/1
20
0/1
20
0/1
① 80 ℃② 100 ℃③ 120 ℃④ 160 ℃⑤
7 IR-Reflow Pb-Free Process 170℃⑥235℃⑦270℃⑧255℃，
20
0/1
60cm/min，2 times
10 20 30 40 50 Forward Current (mA)
Relative Luminosity Vs Ambient Temperature
If=15mA 200
150
阿吉伯特 T-13 4 超级超明亮 LED 灯泡数据表说明书
DescriptionThese non-diffused lamps are designed to produce a bright light source and smooth radiationpattern. A slight tint is added to the lens for easy color identification.This lamp has been designed with aHLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223,HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515,HLMP-C523, HLMP-C615, HLMP-C623Features•Very high intensity •Exceptional uniformity •Microtint lens for color identification•Consistent viewability All colors: AlGaAs RedHigh Efficiency Red Yellow Orange GreenEmerald Green •15° and 25° family•Tape and reel options available •Binned for color and intensity Applications•Ideal for backlighting front panels*•Used for lighting switches •Adapted for indoor and outdoor signsAgilentT-13/4 Super Ultra-Bright LED LampsData Sheet20mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.Selection GuidePart Number Luminous Intensity Iv (mcd) Color2θ1/2[1]Standoff Leads HLMP-Min.Max.DH AS AlGaAs15No C115290.0–C115-O00xx290.0–C115-OP0xx290.01000.0Yes C117-OP0xx290.01000.025No C12390.2–C123-L00xx90.2–Red15No C215138.0–C215-M00xx138.0–C215-MN0xx138.0400.025No C22390.2–C223-L00xx90.2–C223-MN0xx138.0400.0 Yellow15No C315147.0–C315-L00xx147.0–C315-LM0xx147.0424.025No C32396.2–C323-K00xx96.2–C323-KL0xx96.2294.0 Orange15No C415138.0–C415-M00xx138.0–C415-M0D0xx138.0–C415-MN0xx138.0400.025No C42390.2–C423-L00xx90.2–C423-LM0xx90.2276.0 Green15No C515170.0–C515-L00xx170.0C515-LM0xx170.0490.025No C52369.8–C523-J00xx69.8–C523-KL0xx111.7340.0 Emerald Green15No C61517.0–C615-G00xx17.0–25No C623 6.7–C623-E00xx 6.7–Part Numbering SystemHLMP - C x xx - x x x xxMechanical Options00: Bulk01: Tape & Reel, Crimped Leads02: Tape & Reel, Straight LeadsB2: Right Angle Housing, Even LeadsUQ: Ammo Pack, Horizontal LeadsColor Bin Options0: Full Color Bin DistributionD: Color Bins 4 & 5 onlyMaximum Iv Bin Options0: Open (No Maximum Limit)Others: Please refer to the Iv Bin TableMinimum Iv Bin OptionsPlease refer to the Iv Bin TableViewing Angle & Standoffs Options15: 15 Degree, without Standoffs17: 15 Degree, with Standoffs23: 25 Degree, without StandoffsColor Options1. AS AlGaAs Red2. High Efficiency Red3. Yellow4. Orange5. Green6. Emerald GreenPackage OptionsC: T-1 3/4 (5 mm)Absolute Maximum Ratings at T A = 25°CHighHighDH AS Efficiency Performance AlGaAs Red and Green and ParameterRed Orange Yellow Emerald Green Units DC Forward Current [1]30302030mA Transient Forward Current [2]500500500500mA (10 µsec Pulse)Reverse Voltage (Ir = 100 µA)5555V LED Junction Temperature 110110110110°C Operating Temperature Range –20 to +100–55 to +100–20 to +100°C Storage Temperature Range–55 to +100°CNotes:1. See Figure 5 for maximum current derating vs. ambient temperature.2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.Package DimensionsHLMP-Cx15 and HLMP-Cx23HLMP-Cx17(0.039)NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. LEADS ARE MILD STEEL, SOLDER DIPPED.3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.± 0.20± 0.008)Electrical Characteristics at T A = 25°CForward Reverse Capacitance Speed of ResponseVoltage Breakdown C (pF)Thermalτs (ns)Vf (Volts)Vr (Volts)Vf = 0Resistance Time Constant@ If = 20 mA@ Ir = 100 µA f = 1 MHz RθJ-PIN e-t/τsPart Number Typ.Max.Min.Typ.(°C/W)Typ.HLMP-C115 1.8 2.253021030HLMP-C117HLMP-C123HLMP-C215 1.9 2.651121090HLMP-C223HLMP-C315 2.1 2.651521090HLMP-C323HLMP-C415 1.9 2.654210280HLMP-C423HLMP-C515 2.2 3.0518210260HLMP-C523HLMP-C615 2.2 3.0518210260HLMP-C623Optical Characteristics at T A = 25°CLuminous Color,ViewingIntensity Peak Dominant Angle LuminousIv (mcd)Wavelength Wavelength2θ1/2Efficacy@ 20 mA[1]λpeak (nm)λd[2] (nm)(Degrees)[3]ηvPart Number Min.Typ.Typ.Typ.Typ.(lm/w) HLMP-C1152906006456371180HLMP-C117HLMP-C1239020026HLMP-C215138300635626171459017023HLMP-C315146300583585175009617025HLMP-C415138300600602173809017023HLMP-C515170300568570205956917028HLMP-C61517455585602065662728Notes:1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not bealigned with this axis.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.Figure 1. Relative intensity vs. wavelength.Figure 2. Forward current vs. forward voltage (non-resistor lamp).Figure 3. Relative luminous intensity vs. forward current.WAVELENGTH – nmR E L A T I V E I N T E N S I T Y1.00.50I F – F O R W A R DC U R R E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T – m AV F – FORWARD VOLTAGE – VHIGH EFFICIENCY RED, ORANGE,YELLOW, AND HIGH PERFORMANCEGREEN, EMERALD GREENR E L A T I V E L U M I N O U S I N TE N S I T Y (N O R M A L I Z E D A T 20 m A )I F – DC FORWARD CURRENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )0I DC – DC CURRENT PER LED – mA10201.60.80.4515301.2250.20.61.01.4HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREENFigure 5. Maximum forward dc current vs. ambient temperature. Derating based on T j MAX = 110°C.Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )0I PEAK – PEAK FORWARD CURRENT – mA0.60.8300201001.21.00.20.45020010DH As AlGaAs REDηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )I PEAK – PEAK FORWARD CURRENT – mAHER, ORANGE, YELLOW, HIGHPERFORMANCE GREEN, EMERALD GREENI F – F O R W A R D C U R R E NT – m AT A – AMBIENT TEMPERATURE – °C DH As AlGaAs REDI F – F O R W A R D C U R R E N T – m AT A – AMBIENT TEMPERATURE – °CHER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.Intensity Bin Limits Intensity Range (mcd)ColorBin Min.Max.L 101.5162.4M 162.4234.6N 234.6340.0O 340.0540.0P 540.0850.0Q 850.01200.0R 1200.01700.0Red/OrangeS 1700.02400.0T 2400.03400.0U 3400.04900.0V 4900.07100.0W 7100.010200.0X 10200.014800.0Y 14800.021400.0Z 21400.030900.0L 173.2250.0M 250.0360.0N 360.0510.0O 510.0800.0P 800.01250.0YellowQ 1250.01800.0R 1800.02900.0S 2900.04700.0T 4700.07200.0U 7200.011700.0V 11700.018000.0W18000.027000.0N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Intensity Bin Limits, continuedIntensity Range (mcd) Color Bin Min.Max.E7.612.0F12.019.1G19.130.7H30.749.1I49.178.5J78.5125.7K125.7201.1L201.1289.0 Green/M289.0417.0 Emerald Green N417.0680.0O680.01100.0P1100.01800.0Q1800.02700.0R2700.04300.0S4300.06800.0T6800.010800.0U10800.016000.0V16000.025000.0W25000.040000.0 Maximum tolerance for each bin limit is ± 18%.Color CategoriesLambda (nm)Color Category #Min.Max.6561.5564.55564.5567.5 Green4567.5570.53570.5573.52573.5576.51582.0584.53584.5587.0 Yellow2587.0589.54589.5592.05592.0593.01597.0599.52599.5602.03602.0604.5 Orange4604.5607.55607.5610.56610.5613.57613.5616.58616.5619.5 Tolerance for each bin limit is ± 0.5 nm.Mechanical Option MatrixMechanical Option Code Definition00Bulk Packaging, minimum increment 500 pcs/bag01Tape & Reel, crimped leads, minimum increment 1300 pcs/bag02Tape & Reel, straight leads, minimum increment 1300 pcs/bagB2Right Angle Housing, even leads, minimum increment 500 pcs/bagUQ Ammo Pack, horizontal leads, in 1K minimum incrementNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.11Precautions Lead Forming•The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board.•If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package. Otherwise, cut the leads of LED to length after soldering process at roomtemperature. The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond.•It is recommended that tooling made to preciselyform and cut the leads to length rather than rely upon hand operation.Soldering Conditions•Care must be taken during PCB assembly and soldering process to prevent damage to LED component.•The closest LED is allowed to solder on board is 1.59mm below the body (encapsulant epoxy) for those parts without standoff.•Recommended soldering conditions:•Wave soldering parameter must be set andmaintained according to recommended temperature and dwell time in the solder wave. Customer isadvised to periodically check on the soldering profile to ensure the soldering profile used is always conforming to recommended soldering condition.•If necessary, use fixture to hold the LED component in proper orientation with respect to the PCB during soldering process.•Proper handling is imperative to avoid excessive thermal stresses to LED components when heated.Therefore, the soldered PCB must be allowed to cool to room temperature, 25°C, before handling.•Special attention must be given to board fabrication,solder masking, surface plating and lead holes size and component orientation to assure solderability.•Recommended PC board plated through hole sizes for LED component leads:Manual Solder Wave Soldering Dipping Pre-heat Temperature 105 °C Max.–Pre-heat Time 30 sec Max.–Peak Temperature 250 °C Max.260 °C Max.Dwell Time3 sec Max.5 sec Max.LED Component Plated Through Lead SizeDiagonal Hole Diameter 0.457 x 0.457 mm 0.646 mm 0.976 to 1.078 mm (0.018 x 0.018 inch)(0.025 inch)(0.038 to 0.042 inch)0.508 x 0.508 mm 0.718 mm 1.049 to 1.150 mm (0.020 x 0.020 inch)(0.028 inch)(0.041 to 0.045 inch)Note: Refer to application note AN1027 for more information on soldering LED components.Figure 8. Recommended wave soldering profile.BOTTOM SIDE OF PC BOARD TIME – SECONDST E M P E R A T U R E – °CTOP SIDE OF PC BOARDCONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)PREHEAT SETTING = 150°C (100°C PCB)SOLDER WAVE TEMPERATURE = 245°C AIR KNIFE AIR TEMPERATURE = 390°C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)AIR KNIFE ANGLE = 40°SOLDER: SN63; FLUX: RMANOTE: ALLOW FOR BOARDS TO BESUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE./semiconductors For product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004-2005 Agilent Technologies, Inc. Obsoletes 5988-2149ENNovember 12, 20055989-4251EN。
led020侧发光中英文规格书
东莞市荧月电子科技有限公司020贴片超亮白色发光二极管020 SMD Hyper White Top LED产品型号 Model NO.YT020CW0S1版次 REV NO.:V01版文件编号Document NO.:YT-C030001日期 DATE :2015.3.1020 SMD Hyper White Top LED 020贴片超亮白色发光二极管Features 特征•Package Size ：3.8 (L) ×0.95(W) × 0.6 (T) mm 封装尺寸：3.8(长) ×0.95 (宽) ×0.6 (厚) mm •Silicone Packed 采用硅胶封装•Super long lifetime 超长寿命 •Anti UV防紫外线•White colors are available in(2200K -12000K) 可供白光(2200K-12000K) •High CRI products 高显色性产品•Wide viewing angle (2θ1/2=120°) 宽角度 (2θ1/2=120°)Applications •产品应用•Indoor lighting : Fluorescent lamp, tube •室内照明：日光灯管、灯条•Commercial illumination and displays : •商业照明显示：广告字、广告灯箱 Advertising words, light box•LCD Backlighting •LCD 背光源•Decorative lighting : light strip •装饰照明：柔性灯条 •Automotive interior auxiliary lighting•Other illumination and displays •其它照明和显示类O OTop View 顶视OOOPart No. Description 产品型号说明Packaging Description 包装编号说明:电压代码：Bin Range of Forward Voltage 亮度代码：Bin Range of Luminous Intensity 显指代码：Bin Range of RA BIN 位代码：Bin Range of bin 色温代码：Bin Range of Color CCT 型号代码：Type of LED公司代码：Yingyue -electronic CO.,LTDColor Bin Limit 色度代码;(at I F = 30 mA, T a = 25 OC )Color Bin色坐标-电特性曲线图PACKAGE OUTLINE外形尺寸(Units: mm)(mm)一、PRECAUTONS IN USE LED/使用LED注意事项；LED Soldering condition/ LED焊接条件；1：烙铁焊接：烙铁最高30W尖端温度不超过300℃；焊接时不超过3秒；焊接位至少离胶体2毫米。
欧司朗标识照明技术文件
Max High output GEWHMHTS6
BackLED Plus M BA03MA-W4F-765
MiniMax S8
GEWHMMTS8
BackLED Plus S BA01SB-W4F-765
Power Strip
GEWHSSPS3
BoxLED Back Plus BX06BA-W4F-765
备B卓度缩合量显a注越由减理著，ck配原为减节：。LE光来少能基1D0的模效于，公L块果可1分P5l用更将公，us加深分并的
欧司朗LED标识产品 倍亮*明耀 专业级发光字解决方案
说明：
1. 如亮果度需相要应更增高加的将亮近度一值倍，；则只需增加每平方模块数量即可。简单换算方式为，模块密度每增加一倍， 2. 用于亚克力板灯箱时，模块之间的间距与灯箱高度比例不能大于 ： 1.6 1 3. 以上亮度/照度值为在白色德固赛PLEXIGLAS®宝克力@WH14 测得的数值，其透光率为53%
欧司朗LED标识产品 传统T5广告灯箱现状
人民广场地铁通道
上海火车南站
莘庄凯德龙之梦购物中心
轨交三号线宜山路站
欧司朗LED标识产品 非专业级LED解决方案
来福士1F主入口
上海南站出口
欧司朗LED标识产品 倍亮*明耀 专业级发光灯箱解决方案
项灯传改推排功测实附目箱统造荐布耗试验加实尺方目产方计结结优排寸案标品案算果论势：：：：：：：：：：目平首灯模灯2TB3I平系节实超P米.5X测66均都箱块箱均统能测长荧X06照*6照机厚中厚3（照功效照寿光1B2度度场度心度米度耗果度L命=灯AE1均-广降间达达达及>6W31D*33灯匀26告低距到1模到到系.400W52箱F00灯客W42块客客统公0（-057厚ll/箱户x）户户质%公分x平6含度5（，改要要要+保分米电I2单P节造求求求（，0源6公面能5每710（分喷23平K70O小绘W米%T功时灯）电1耗6箱源v颗9s布），01W），5共K/平超3小2米级颗时防）护
DS-0467-Machining-of-sealing-surfaces- 中英文对照
Table of contents Page1 Scope of application / 适用范围 (2)2 Scope of validity / 有效范围 (2)3 References / 参考文献 (2)4 Definition of sealing surface / 密封面的定义 (2)5 Production process / 生产工艺 (4)5.1 Axial sealing / 轴向密封 (4)5.2 Radial sealing / 径向密封 (4)5.3 Exceptions / 径向密封 (5)6 Insertion mold for sealing grooves / 密封槽模型 (6)7 Permitted imperfections on the sealing surfaces / 密封面上允许的缺陷 (7)7.1 Permitted imperfections requiring no reworking / 允许的不需要返工的缺陷 (7)7.2 Reworking of imperfections / 缺陷的返工 (8)8 Change management / 变更管理 (9)8.1 Handling of non-conformity reports (NCRs) / 不合格品报告（NCR）的处理 (9)8.2 Handling of technical modifications initiated by the supplier/供应商发起的技术变更的处理119 Packaging and protection of sealing surfaces / 密封面的包装和保护 (11)9.1 Protection of sealing surfaces / 密封面的保护 (11)9.2 Packaging / 包装 (11)1 Scope of application / 适用范围This Delivery Specification defines the requirements for the manufacture ofsealing surfaces and sealing grooves with surface roughness Rz5max 10(maximum peak-to-valley height = 10 μm) for static sealing elements onpressurized components.本交货规范规定了承压部件静态密封元件表面粗糙度Rz5max 10(最大峰谷高度= 10μm)的密封面和密封面槽的制造要求。
Citiled COB系列LED灯光产品说明书
DATA SHEETIntroduction Performance Characteristics Mechanical Dimensions Characteristic Curves ReliabilityPacking Specification PrecautionP 2P 3P 5P 6P 9P 10P 11 CITILED COB SeriesStandard Type.Ra70 Min., Ra80 Min. Model CLU04Q-1212E11. Introduction1-1. Product Description1-2. Features・Mechanical Dimensions :28 × 28 × 1.4 (mm)・Package Structure :Aluminum Base Chip on Board ・Reference Assembly :M3 screw, Connector ・CRI (Ra):70 Min., 80 Min.・Nominal CCT :3,000K, 4,000K, 5,000K ( CRI(Ra) 70Min. )2,700K, 3,000K, 3,500K, 4,000K, 5,000K, 5,700K, 6,500K ( CRI(Ra) 80Min. )・Chromaticity Range:3-step Ellipse, the center refers to ANSI C78.377:2017. ( CRI(Ra) 70Min. )2-step Ellipse, the center refers to ANSI C78.377:2017. ( CRI(Ra) 80Min. )・Thermal Resistance :0.32C/W ・Maximum drive current :2760mA ・UL recognized component (E358566)・RoHS compliant・Better die arrangement for optics・Wide range of luminous flux and high efficacy・Improved lumen density compared with previous version CLU04Q -1212E1-303L7X4[1][2][3][4][5][1]:[2]:[3]:[4]:[5]:Nominal CCT CRI (Ra)Product NomenclatureCLU04Q 12123000K 70 Min.Product shape Die count in series Die count in parallel CITIZEN ELECTRONICS is the first COB manufacturer.With many years of knowledge, experience, and advanced packaging technology, we continue to produced high quality and highly reliable products.The new COB series, Version9, while keeping the conventional product lineup and package sizes, achieves both high color quality (2 Step ellipse) and higher driving capability.In addition, efficacy and reliability are improved by selecting superior materials and optimizing production processes.Our highly reliable and efficient COB light source contributes to the realization of a circular economy through energy saving and reduction of carbon emissions.2. Performance Characteristics2-1. Electro Optical Characteristics2-2. Absolute Maximum RatingsSymbol RatingPi 116.5*1If 2760*1Ir 1Top -40 ~ +100Tst -40 ~ +100Tc 120*2Tj140*3*2. Refer to 3. Outline drawing for Tc measurement point.*3. Junction temperature calculation formula : Tj = Tc + Rj-c × PiParameterInput Power (W)Forward Current (mA)Reverse Current (mA)Storage Temperature (C)Case Temperature (C)Junction Temperature (C)Operating Temperature (C)*1. Input power and forward current are the values when the LED is used within the range of the derating curve in this data sheet.( Tj=85C )Ra R9Tc25C*Min.Min.Min.Typ.Typ.Typ.Min.Typ.Max.CLU04Q-1212E1-303L7X43000K 70-5,6566,4286,9251761,08031.433.836.20.32CLU04Q-1212E1-403L7X44000K 70-5,6896,4656,9651771,08031.433.836.20.32CLU04Q-1212E1-503L7X45000K 70-5,7106,4896,9911781,08031.433.836.20.32CLU04Q-1212E1-272M2X22700K 8004,9915,6736,1111551,08031.433.836.20.32CLU04Q-1212E1-302M2X23000K 8005,1845,8926,3471611,08031.433.836.20.32CLU04Q-1212E1-352M2X23500K 8005,3036,0276,4931651,08031.433.836.20.32CLU04Q-1212E1-402M2X24000K 8005,4256,1666,6421691,08031.433.836.20.32CLU04Q-1212E1-502M2X25000K 8005,4096,1476,6231681,08031.433.836.20.32CLU04Q-1212E1-572M2X25700K 8005,3546,0856,5561671,08031.433.836.20.32CLU04Q-1212E1-652M2X26500K805,3046,0276,4941651,08031.433.836.20.32Notes :1. Citizen Electronics maintains a tolerance of ± 10% on luminous flux measurements.2. Citizen Electronics maintains a tolerance of ± 3% on forward voltage measurements.3. Citizen Electronics maintains a tolerance of ± 2 on Ra measurements. * : Values of Luminous flux at Tc=25C are provided as reference only.Product codeForward Current( mA )Thermal Resistance Rj-c ( C/W )CRI Nominal CCTLuminous flux( lm )Efficacy ( lm/W )Forward Voltage( V )Tj85C2,700K ( 0.4578, 0.4101)3,000K( 0.4339, 0.4033)3,500K ( 0.4078, 0.3930)4,000K ( 0.3818, 0.3797)5,000K ( 0.3446, 0.3551)5,700K ( 0.3287, 0.3425)6,500K( 0.3123, 0.3283)3-step Ellipse.2-step Ellipse.Color RegionNominal CCT Center Point ( x, y )---0.003540.00236-0.00507-0.001983-step 2-step 0.0083452.970.00634-0.00278 ( Rated current, Tj=85C )53.170.005560.004080.002720.00516-0.0027457.28Oval parameterMajor Axisa Minor Axisb E llipse Rotation Angleθ3-step 2-step * Color region stay within 3-step / 2-step ellipse from the chromaticity center.* The chromaticity center refers to ANSI C78.377:2017.* θ is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse.54.0059.6258.3859.460.009390.006260.004020.002680.00446-0.001900.008220.005482-3. Chromaticity CharacteristicsNote : Citizen Electronics maintains chromaticity ( x, y ) +/-0.0050.300.350.400.450.300.350.400.450.50yxx-y chart CIE19314,000K3,000KBlack Body Locus2,700K3,500K5,000K5,700K6,500K2-step 3-step3. Mechanical DimensionsUnit : mmTolerances unless otherwise specified : +/-0.3・Internal Circuit12 S 12 P Protection deviceLED deviceCathodeAnodeMarking 1 : Serial No.Marking 2 : Code No.CRI CCTDie count in parallel Die count in seriesCLU0xQ seriesMarking 3 : Data MatrixAN 12 12 ** ** *4. Characteristic Curves4-1. Forward Current Characteristics / Temperature CharacteristicsForward Current vs. Forward VoltageForward Current vs. Relative Luminous FluxTc=25CTc=25CCase Temperature vs. Forward VoltageCase Temperature vs. Relative Luminous FluxIf=1080mAIf=1080mA30.032.034.036.038.040.00100020003000V f [V ]If [mA]0%50%100%150%200%250%100020003000R e l a t i v e L u m i n o u s F l u x [a .u .]If [mA]32.033.034.035.036.0255075100125V f [V ]Tc [C]0%20%40%60%80%100%120%0255075100125R e l a t i v e L u m i n o u s F l u x [a .u .]Tc [C]4-2. Optical CharacteristicsTj=85CIf=1080mASpectrum : CRI(Ra) 80 Min.0%10%20%30%40%50%60%70%80%90%100%380430480530580630680730780R a d i a t i v e I n t e n s i t yWave length [nm]6,500K5,700K 5,000K 4,000K 3,500K 3,000K2,700KTj=85CIf=1080mASpectrum : CRI(Ra) 70 Min.0%10%20%30%40%50%60%70%80%90%100%380430480530580630680730780R a d i a t i v e I n t e n s i t yWave length [nm]5,000K4,000K3,000K4-2. Optical Characteristics (continued)4-3. Derating CharacteristicsRadiation Characteristic0%20%40%60%80%100%X Y80°70°60°50°40°30°20°10°-80°-70°-60°-50°-20°-30°-40°-10°90°-90°Case Temperaturevs. Allowable Forward Current1000200030000255075100125I f [m A ]Tc [C]5. Reliability5-1. Reliability Test5-2. Failure Criteria-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle85 C, 85 %RH for 500 hoursThermal Shock TestContinuous Operation Test High Temperature Storage TestLow Temperature Storage Test Moisture-proof Test If=1080mA , Tj=140C (with Al-fin) ×1000hoursTest Item100 C × 1000 hours -40 C × 1000 hours Test ConditionIf=1080mA , Ta= 25C (with Al-fin) ×1000hours ( Tc=25C )U defines the upper limit of the specified characteristics. S defines the initial value.Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be return to the normal ambient conditions after the completion of each test.Total Luminous FluxΦvIf=1080mA<S × 0.85Measuring Item Symbol Measuring ConditionFailure CriteriaForward Voltage Vf If=1080mA >U × 1.1Unit : mmProduct : 30 pcs/tray1. TYPEe.g. CLU04Q-1212E12. P.No. ( Customer's P/N )3. Lot No.2175015(b)(a) Last two digit of the year 21 : Year 2021(b) Production month 7 : JulyNote: October, November and December are designated X,Y and Z.(c) CE's control number 4. Quantity(a)(c)Example of indication labele.g. 6. Packing Specification6-1. PackingAn empty tray is placed on top of a 6-tier tray which contain 30 pieces each.( Smallest packing unit : 180 pieces )A label with product name, quantity and lot number is placed on the upper empty tray.Tray ( Dimensions: 310 x 210 x 12 mm / Materials: Electrically conductive PS ) CUSTOMERTYPE P.NO Lot No Q'ty: CLU***-******-******* : ****** : ******* : ***--- ( 1 ) --- ( 2 ) --- ( 3 ) --- ( 4 )7. Precaution7-1. Handling with care for this product-Both the light emitting area and white rim around the light emitting area is composed of resin materials.Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail(e.g. edge of reflector part) because the function, performance and reliability of this product are negatively impacted.-Please be aware that this product should not come into contact with any other parts while incorporating in your lightingapparatus or your other products.-Please be aware that careful handling is required after the attachment of lead wires to prevent the application of any loadto the connections.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-2. Countermeasure against static electricity-Handling of this product needs countermeasures against static electricity because this is a semiconductor product.-Please take adequate measures to prevent any static electricity being produced such as the wearing of a wristband oranti-static gloves when handling this product.-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine and conveyance unit)should be connected to ground and please avoid the product to be electric-charged.-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).-After assembling the LEDs into your final product(s), it is recommended to check whether the assembled LEDs aredamaged by static electricity (electrical leak phenomenon) or not.-It is easy to find static damaged LED dies by a light-on test with the minimum current value.7-3. Caution of product assembly-Regarding this product assembling on the heat sink, it is recommended to use M3 screw.It might be good for screw tightening on the heat sink to do temporary tightening and final tightening.In addition, please don’t press with excess stress on the product.-The condition of the product assembling on the heat sink and the control of screw tightening torque needs to be optimized according to the specification of the heat sink.-Roughness, unevenness and burr of surface negatively impact thermal bonding between the product and heat sink andincrease heat thermal resistance between them.Confidence of thermally and mechanical coupling between the product and heat sink are confirmed by checkingthe mounting surface and measuring the case temperature of the product.-In order to reduce the thermal resistance at assembly, it might be good to use TIM (Thermal Interface Material) on whole contact surface of the product.In case of using thermal grease for the TIM, it might be good to apply uniformly on the contact surface of the product.In case of using thermal sheet for the TIM, it might be good to make sure that the product is NOT strained by stress when the screws are tightened for assembly.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-4. Thermal Design-The thermal design to draw heat away from the LED junction is most critical parameter for an LED illumination system. High operating temperatures at the LED junction adversely affect the performance of LED’s light output and lifetime. Therefore the LED junction temperature should not exceed the absolute maximum rating in LED illumination system. -The LED junction temperature while operation of LED illumination system depends upon thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package, power loss and ambient temperature. Please take both of the thermal design specifications and ambient temperature conditions into consideration for the setting of driving conditions.-For more information, please refer to application note "Thermal Management", "Instruction Manual(COB LED Package)".7-5. Driving Current-A constant current is recommended as an applying driving current to this product.In the case of constant voltage driving, please connect current-limiting resistor to each products in series and control the driving current to keep under the absolute maximum rating forward current value.-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).They also affect negative impact on the product(s) therefore please make sure that no excess voltage, no excess current and no reverse voltage is applied to the product(s) when the LED driver is turn-on and/or turn-off.-For more information, please refer to application note "Driving", "Instruction Manual(COB LED Package)".7-6. Lighting at a minimum current value-A minimum current value of lighting of all dice is 15mA.When a minimum current is applied, LED dice may look different in their brightness due to the individual difference of the LED element, and it is not a failed product.7-7. Electrical Safety-This product is designed and produced according to IEC 62031:2008(IEC 62031:2008 LED modules for general lighting. Safety specification)-Dielectric voltage withstand test has been conducted on this product to see any failure after applyingvoltage between active pads and aluminum section of the product, and to pass at least 500V.-Considering conformity assessment for IEC62031:2008, almost all items of the specification depend uponyour final product of LED illumination system.Therefore, please confirm with your final product for electrical safety of your product.As well, the products comply with the criteria of IEC62031:2008 as single LED package.- A minimum current value of lighting of all dice is 60 mA. When a minimum current is applied, LED dice may look different in their brightness due tothe individual difference of the LED element, and it is not a failed product.7-8. Recommended soldering Condition (This product is not adaptable to reflow process.) -For manual solderingPlease use lead-free soldering.Soldering shall be implemented using a soldering bit at a temperature lower than 350C, and shall befinished within 3.5 seconds for one land.No external force shall be applied to resin part while soldering is implemented.Next process of soldering should be carried out after the product has return to ambient temperature.Contacts number of soldering bit should be within twice for each terminal.* Citizen Electronics cannot guarantee if usage exceeds these recommended conditions.Please use it after sufficient verification is carried out on your own risk if absolutely necessary.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-9. Eye Safety-The International Electrical Commission (IEC) published in 2006 IEC 62471”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.When sorting single LEDs according to IEC 62471, almost all white LEDs can be classifiedas belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).-However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factorsthat affect the risk group determination of the LED, and especially a high-power LED, that emits lightcontaining blue wavelengths,might have properties equivalent to those of Risk Group 2 (moderate risk).-Great care should be taken when directly viewing an LED that is driven at high current, has multipleuses as a module or when focusing the light with optical instruments, as these actions might greatlyincrease the hazard to your eyes.-It is recommended to regard the evaluation of stand-alone LED packages as a referenceand to evaluate your final product.7-10. This product is not designed for usage under the following conditions.If the product might be used under the following conditions, you shall evaluate its effect and appropriate them. In places where the product might:-directly and indirectly get wet due to rain and/or at place with the fear.-be damage by seawater and/or at place with the fear-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.-be exposed to dust, fluid or oil and/or at place with the fear.Precautions with regard to product use(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as intended. CITIZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of CITIZEN ELECTRONICS or any third party with respect to the information in this document. Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document, please confirm the latest product information with a CITIZEN ELECTRONICS‘s sales office, and formal specifications must be exchanged and signed by both parties prior to mass production.(2) All information included in this document such as product data, diagrams, charts, is current as of the date this document is issued.Such information, however, is subject to change without any prior notice.(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document.(4) Absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement.(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. In addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.(6) The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances). Consult Citizen Electronics’s sales staff in advance for information on the applications in which exceptional quality and reliability are required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health ( such as for airplane, aerospace, submersible repeaters, nuclear reactor control system, automobiles, traffic control equipment, life support system and safety devices ) . This LED does not comply with ISO/TS 16949 (IATF16949) and is not intended for automotive applications.(7) The customer shall not reserve engineer by disassembling or analysis of the LEDs without having prior written consent from Citizen Electronics. When defective LEDs are found, the customer shall inform Citizen Electronics before disassembling or analysis.(8) When exporting our products, please ensure conformance with applicable laws and regulations and take appropriate actions such as obtaining an export license.(9) Please do not use or supply our products for any weapons of mass destruction (WMD) or for any other military purposes.(10) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries.is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN. **********************.co.jp。
海洋光源5W LED产品说明书
RoHSConformity5W HI-POWER LED SPECIFICATIONHPG8b-45K5RxHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-26393125HUEY JANN High Power5W LED is made of hi-eff AS/TS AlInGaP chips with precise package technique which makes excellent heat dissipation to reachthe advantages of high luminous efficiency,low decay,and long endurance. Now we have these colors available:red,green,blue,white,yellow and infrared.2FEATERUSØInstant lightØLong operating lifeØSuperior ESD defenseØLow voltage DC operatedØMore energy efficient than incandescent and most halogen lamps2TYPICAL APPLICATIONSØArchitectural detail lightingØPortable flashlightØReading lightsØMedical applicationsØLCD backlightsØBeacon lightsØDecoration lightsHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252PACKAGE DIMENSIONS:1.All dimensions are in millimeter.2.Lead spacing in measured where the lead emerge from the package.3.prodruded resin under flange is 1.5mm max.4.specifications are subject to change without notice.5.Tolerance is +/-0.3mm unless otherwise noted.6.Driving LED without heat sinking device is forbidden.7.It is strongly recommended that the temperature of lead be not higher than 55oC.8.Proper current derating must be observed to maintain junction temperature below the maximum.9.LEDs are not designed to be driven in reserve bias.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252ABSOLUTE MAXIMUM RATINGS*1.Duty Ratio=0.1%,Pulse Width=10us.*2.Iron soldering high temperature will not cause damage to the dice.But be aware of the high temperature will not only make the epoxy soften but also cause the lead moving and the gold wire broken and even open. So before returning to the normal temperatures PLEASE AVOID any serious pressure on the top of epoxy and lead.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252ELECTRIC-OPTICAL CHARACTERISTICS*The dominate wavelength ,λd,is derived from the CIE Chromaticity Diagram and represents the color of the device.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252RELIABILITY TEST*Failure Criteria:1.VF arise ≧10%2.IV decline ≧30%3.A failure is an LED that is open or shortedHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252RELIABILITY TEST*Failure Criteria:1.VF arise ≧10%2.IV decline ≧30%3.A failure is an LED that is open or shortedHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252TYPICAL ELECTRICAL OPTICAL CHARACTERISTICS CURVESHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931251.52.0 2.53.0 3.54.0800FORWARD VOLTAGE (V)F O R W A R D C U R R E N T (m A )F O R W A R D C U R R E N T (m A )AMBIENT TEMPERATURE( C)O400120016002000-20 0 20 40 60 80 100 1200.20.41.0Ambient temperature( C)O R e l a t i v e l u m i n o u s i t y1.204008001200160020000.20.40.60.81.0R e l a t i v e l u m i n o u s i t yForward current (mA)1.20.60.81.42TYPICAL ELECTRICAL OPTICAL CHARACTERISTICS CURVESHUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-26393125Ta=25 COVIEW ANGLE 01020304050607080900.20.51/2 POWER0.81.0Ambient Temperature(C)o -0.012-0.010-0.004-0.0020.0020.0040.008-40 -20 0 20 40 60 80 100C h r o m a t i c i t y C o o r d i n a t e-0.008-0.00600.006WAVELENGTH (nm)R E L A T I V E R A D I A N T I N T E N S I T YTa=25 CO0.20.40.60.81.01.2570 620 670Forward CurrentTa=25 CO-0.03-0.02-0.0100.01Cx0.030 500 1000 1500 2000 2500Cy0.02C h r o m a t i c i t y C o o r d i n a t e2Brightness Bin SelectionNOTE:1.Test Condition at IF=1400mA.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252Package Dimension For Emitter TypeNOTE:1.Dimensions are specified as follows:mm.2.Tolerance is +/-0.3mm unless otherwise noted.3.50pcs emitters per tube.4.80tubes per inside box.5.4inside box per outsidebox.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252Package Dimension For Star TypeNOTE:1.Dimensions are specified as follows:mm.2.Tolerance is +/-0.3mm unless otherwise noted.3.100pcs star per tray.4.10trays perbox.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-26393125Slug Independent2Requirements to user For Emitter TypeThe LED products by HUEY-JANN is designed,manufactured,and sold aiming at high standard quality and reliability,however,reliability of electronic apparatus is seen as a product of reliability superior to HUEY-JANN and using status at users.From this point,HUEY-JANN requests user’s for following things.2Recommended Solder Pad Design For Emitter TypeNote:1.All dimensions are in2.Electrical isolation is required between Slug and Solder Pad.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252Heat Plate Soldering Condition For Emitter Type a.Soldering Process for Solder PasteUse Solder Mask to print Solder Paste on PCB.Place Emitter on PCB.Put PCB on Heat Plate until Solder Paste melt.1.The Solder Paste sould be melted within 10seconds.2.Take out PCB out from Heat Plate within 15seconds.b.Soldering Process for Solder WirePut PCB on Heat Plate.Place Solder Wire to the solder pad of PCB.Put Emitter on PCB.Take the PCB out from Heat Plate within 10seconds.NOTE:1.Heat plate temperature:230oC max for Lead Solder and 260oC max for Lead-Free Solder.2.When soldering,do not put stress on the LEDs during heating.3.Aftersoldering,do not warp the circuit board.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252Soldering Process For Hot Bar For Emitter TypeThermal Conductive Glue DispensingPut Emitter on the PCB.Hot Bar soldering of High Power EmitterNOTE:1.Hot Bar temperature:230oC max for Lead Solder and 260oC max for Lead-Free Solder.2.When soldering,do not put stress on the LEDs during heating.3.After soldering,do not warp the circuit board.2Manual Hand Soldering For Emitter Typ ePlace Thermal Conductive Glue on the PCB.Place Emitter on the e Soldering Iron to solder the leads of Emitter within 5seconds.1.Solder tip temperature:230°C max for Lead Solder and 260°C max for Lead-Free Solder.2.Avoiding damage to the emitter or to the PCB dielectric layer.Damage to the epoxy layer can cause3.Do not let the solder contact from solder pad to back-side of PCB.This one will causea short circuit and damage emitter.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252ConclusionHuey Jann provide simple comparison table for High Power LED,you could find your request heat dissipation area from the following table.*TAB in this table is according to highest operating temperature 65C.*Different materials of second heat dissipation device,the surface area of heat sink will be different.Thus,this document is for reference only.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252TAB Temperature -Life Characteristics Curves*Board Ambient Temperature Tolerance +/-5C.*TAB in this table is according to highest operating temperature 65oC.*The TAB is the stable testing value for the product lighted 100%after one hour.*Different materials of second heat dissipation device,the surface area of heatsink will be different.Thus,this document is for reference only.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line 466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-263931252Remarks:1.Brightness values are measured during a current pulse of typical25ms,thebrightness tolerance is+/-15%.2.Dominant wavelength are measured during a current pulse of typical200ms,thechromaticity tolerance is+/-1.0nm.3.Forward voltage are measured during a current pulse of typical5ms,the VF toleranceis+/-0.15V.4.Dimensions are specified as follows:mm.5.Related technical parameters of LED are average value resulted from statistic.Theactual parameters of LED could be slightly different from average and characteristic curve.6.The average value of LED will be changed by technical improvement and elevation,and subject to change without prior notice.7.Hi-Power LED can not be operated without second heat dissipating structure.8.Poor or damaged second heat dissipating structure could lead to defective electricalcharacteristic of High Power LED,CCT(Wavelength)escalation,brightness drop, lifetime shortening or burn out.Following instructions of Huey Jann Hi-Power LED series document can avoid LED burn out and electrical defectiveness due to improper usage,and maintain normal performance of the products.HUEY JANN ELECTRONICS INDUSTRY CO.,LTD.No.27Line466Sec.2,Canng-nan Rd.Wu-chi Town Taichung Shien,Taiwan,R.O.C.TEL:+886-4-26393976FAX:+886-4-26393125。
阿莱顿·克鲁斯-豪恩斯商品说明书
6with metal EJ enclosures2.6.112 EATON’S CROUSE-HINDS BUSINESSEATON’S CROUSE-HINDS BUSINESS 2.6.1136I Ex-Control and distribution systems IThe distributions and built-in compo-nents are combined to customers‘ specifications for wall-mounting or free-standing frameworks, depending on the installation site.Free-standing frameworks are de-signed according to the distributions or special apparatus required and fitted with standardised U-rails. For outdoor installations, we recommend a canopy to protect the distribution from the sun and rain.The frameworks all feature a grey epoxy resin finish identical with that of the EJ enclosures. Hot-dip galvanised steel frameworks are available on request.The modular design makes it possible to put together distributions and built-in components using standardised enclosure sizes.The enclosures are interconnected with cable bushings and/or bus bars and are especially designed to facili-tate bus-bar allocation when putting distributions together.Electrical components built into the enclosures can be actuated from the outside via control units mounted on the front panels.Ex-d cable entries must be used where required.EJB enclosures are made of copper- free aluminium (<0.1%) and EJW enclosures of welded steel. All enclosures are coated with a grey epoxy resin.Covers and enclosures are mounted on a flameproof flange plate and screweddown with stainless steel screws. Enclosures of the types EJB 12R to EJB 23R are fitted with hinges for easy opening and closing.6I Ex-Control and distribution systems IEJB 14RTechnical data1)2.6.114 EATON’S CROUSE-HINDS BUSINESSEATON’S CROUSE-HINDS BUSINESS 2.6.1156I Ex-Control and distribution systems ID i m e n s i o n s i n m mOrdering detailsContent Power dissipation Rated Weight Rail fixing EnclosureIntern. space Order No.in Wattcurrent in Ain kg dimension mm size mmmmT6 T5 T 4 DEHBT H1 B1 T1EJB 12 R 30 60 100 40 3.0 242 166 215 131 102 178 89 57 NOR 000 001 170 438EJB 12 A 30 60 100 40 3.6 242 166 215 131 162 178 89 110 NOR 000 001 170 446EJB 14 R 80 140 240 65 8.3 436 178 412 150 143 358 103 85 NOR 000 001 170 462EJB 23 R 60 140 240 100 11.0 354 240 336 217 212 276 163 152 NOR 000 001 170 488EJB 110 125 170 295 160 22.0 310 310 373 373 230 305 305 162 NOR 000 001 170 496EJB 120150 270 480 30028.5 414 310 474 373 230 405 305 162 NOR 000 001 170 503EJB 120 M3 150 270 480 300 28.5 414 310 474 373 230 405 305 162 NOR 000 111 170 601EJB 120 M4 150 270 480 300 28.5 414 310 474 373 230 405 305 162 NOR 000 111 170 606EJB 121 150 280 500 350 32.0 414 310 474 373 295 405 305 235NOR 000 001 170 511EJB 130 200 340 590 450 35.3 520 310 577 373 230 518 305 162 NOR 000 001 170 529EJB 131 200 350 610 500 39.0 520 310 577 373 295 518 305 235 NOR 000 001 170 537EJB 240 250 400 700 800 52.3 624 414 680 474 230 619 405 162 NOR 000 001 170 545EJB 241 250 400 700 850 56.8 624 414 680 474 295 619 405 235 NOR 000 001 170 553EJB 241 M1 250 400 700 85054.0 624 414 680 474 295 619 405 235 NOR 000 111 170 469EJW 250 250 340 560 1200 145.0 852 387 890 425 280 810 345 199 NOR 000 001 190 139EJW 251 380 520 850 1200 167.0 852 387 890 425 440 810 345 320 NOR 000 001 190 197EJW 350 380 520 850 1200 168.0 852 502 890 540322 810 460250 NOR 000 001 190 171EJW 351450 600 1000 1200175.0 852 502890 540 446 810 460 375 NOR 000 001 190 062EJW 561 600 730 1000 1200 380.01242 687 1280 765 386 1200 685 325 NOR 000 001 190 064Dimension drawing6I Ex-Control and distribution systemsITechnical dataOrdering detailsMotor capacity Main switch Cable gland Weight Module size Order No. Type: Direct circuit4.0 kW 25 A 2 x M 25 Ex-d 4.0 kg 1 EXKO 732 101 M4.0 kW 25 A 2 x M 25 Ex-d 12.0 kg 2 EXKO 732 102 M5.5 kW 40 A 2 x M 25 Ex-d 12.0 kg 2 EXKO 732 103 M8.0 kW 40 A 2 x M 25 Ex-d 16.8 kg 3 EXKO 732 104 M 12.5 kW 63 A 2 x M 32 Ex-d 17.2 kg 3 EXKO 732 105 M 15.0 kW 63 A 2 x M 32 Ex-d 18.8 kg 3 EXKO 732 106 M Type: Star-delta starter12.5 kW 40 A 2 x M 25 Ex-d 17.2 kg 2 EXKO 732 113 M 18.5 kW 40 A 2 x M 32 Ex-d 19.7 kg 2 EXKO 732 114 M 25.0 kW 40 A 2 x M 32 Ex-d 25.3 kg 3 EXKO 732 115 M Type: Reversing circuit4.0 kW 25 A 2 x M 25 Ex-d 4.0 kg 1 EXKO 732 107 M4.0 kW 25 A 2 x M 25 Ex-d 12.0 kg 2 EXKO 732 108 M5.5 kW 40 A 2 x M 25 Ex-d 12.0 kg 2 EXKO 732 109 M8.0 kW 40 A 2 x M 25 Ex-d 16.8 kg 3 EXKO 732 110 M 12.5 kW 63 A 2 x M 32 Ex-d 17.2 kg 3 EXKO 732 111 M 15.0 kW 63 A 2 x M 32 Ex-d 18.8 kg 3 EXKO 732 112 M2.6.116 EATON’S CROUSE-HINDS BUSINESSEATON’S CROUSE-HINDS BUSINESS 2.6.1176I Ex-Control and distribution systemsID i m e n s i o n s i n m mWiring diagram I Dimension drawing。
Tufflite LED商品说明书
Tufflite LED is a versatile general purpose, IP66 rated, luminaire. It is supplied with fast fit mounting clips for ease of installation, avoiding the need to drill the housing. Options include; 3 hour combined non-maintained emergency functionality, dimmable control gear and integrated lighting controls options to maximise energy savings, user comfort and control.Linear LED light engines and efficient control gear provide class leading performance; they are protected by a GRP (glass reinforced polymer)base and polycarbonate diffuser with a high impact resistance rating of IK08.With a comprehensive range of lumen outputs across3 luminaire lengths, Tufflite LED delivers choice andflexibility to suit a wide range of applications such aswarehousing, plant rooms, car parks, loading/storage spaces and assembly areas where high ingressprotection and robust construction are required.• N ominal 4’, 5’ and 6’ formats, in narrow and wide housings, ideal for both new and retro fit applications • I mpact and heat resistant opal polycarbonate diffuser and GRP base housing construction, IK08 rated, and secured with anti-tamper diffuser clips • D eep poured continuous polyurethane gasket to maintain IP66 rating • C lass leading LED luminaire performance and efficacy with lumen packages to match and exceed traditional fluorescent technology with reduced energy consumption • I ntegrated lighting control options to maximise energy saving, user comfort and control• I ntegral 3 hour combined non-maintainedfunctionality option•F ast fix stainless steel mounting clips for rapid installation. (No need to drill the housing avoidinga potential ingress path)Tufflite LEDIP66CONTROLSW AR R A NT YWA R R A NT YYEAR IK081475LED and Control Gear• High efficacy linear LED light engines • >80CRI, 4000K• Energy efficient fixed output control gear as standard • DALI dimmable control gear option Materials• B ody – polyester GRP in RAL7035 grey with integrated gear tray supports and deep poured polyurethane gasket • Diffuser – UV stabilised fire retardant polycarbonate • D iffuser clips – polyamide - offering strength and integral locking screw function • Gear tray – sheet steel, white finish• Mounting brackets – stainless steel (grade 501)Installation Notes• S urface/suspension mount rear brackets supplied, removing the need to drill the housing base • 20mm cable entry knockouts at each end, supplied complete with sealing plugs • Terminal block with 2 x 2.5mm² cable capacity per termination • Through wiring kits available• G eartray hangs on the body for ease of install, locates in final position with tool free clips • S imple to use diffuser clips, 4 of which have security screws to lock them in the closed position as an anti-tamper feature and ensures access only through tooled entry to the luminaire.• T his luminaire is IP66 rated, this rating only applies when the luminaire is installed observing the correct orientation and must not be positioned in direct sunlight.• T his luminaire has an ambient temperature of -25˚C to +25˚C for the non-emergency version.• F or Emergency variants, this luminaire has an ambient temperature range of -5˚C to +25˚C to ensure the batteries work correctly.In exterior applications, it is recommended the luminaires are protected under a canopy or cover. The housing is not suitable for mounting with the base directly on a vertical surface in the horizontal orientation. Options• DALI dimming option• Intelligent light and energy management options:- E nd mounted IP65 rated sensor with switching or dimming function, with/without photocell• ‘Corridor Function’ control available with the ‘CO’ suffix • F ully integral combined non-maintained emergency, 3 hour duration. Suitable for use on defined escape routes.• W e offer a range of product support contracts to aidcommissioning, reduce your maintenance costs, comply with legislative test requirements and maximise the lifespan of your lighting equipment.SpecificationTo specify state: General purpose IP66 rated luminaire with GRP base and reeded opal polycarbonate light controller, secured by tamper resistant hinged latches and removable geartray retained by tool free clips, as Eaton’s Tufflite LED range, part no. ________Photometric DataLuminaire Output = 4738 lumens SHR nom: 1.50SHR max: 1.667Utilisation factors / TM5 R eflectances Room Index C W F 0.75 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 70 50 20 54 62 69 74 81 86 90 94 98 70 30 20 46 54 62 67 75 80 84 90 93 70 10 20 41 48 56 61 69 75 79 85 9050 50 20 52 59 66 70 77 81 84 89 92 50 30 20 45 52 59 64 71 76 80 85 88 50 10 20 40 47 54 59 66 72 76 81 85 30 50 20 49 56 62 67 73 77 80 83 86 30 30 20 43 50 57 61 68 72 76 80 83 30 10 20 39 46 52 57 64 69 72 77 81 0 0 0 36 42 48 53 59 63 67 71 74 BZ-class5 5 5 5 5 5 5 5 5Weight (kg)TypeL(mm)W(mm)D(mm)Fixing Centres (mm)LEDLED EmergDALIDALI Emerg4’ single 1282101101800 3.05 3.40 3.15 3.504’ twin 1282145101800 4.27 4.62 4.35 4.705’ single 15781011011100 3.75 4.10 3.95 4.305’ twin 15781451011100 5.35 5.70 5.30 5.606’ single 18401011011540 4.85 5.20 5.10 5.406’ twin1840145101515/15456.456.806.707.10DimensionsCat NoW (mm)D (mm) L (mm) TXL4N254KZ 101 101 1282 TXL4N344KZ 101 101 1282 TXL4N474KZ 101 101 1282 TXL4W644KZ 145 101 1282 TXL5N274KZ 101 101 1578 TXL5N364KZ 101 101 1578 TXL5N514KZ 101 101 1578 TXL5W554KZ 145 101 1578 TXL5W754KZ 145 101 1578 TXL5W904KZ 145 101 1578 TXL6N534KZ 101 101 1840 TXL6W954KZ 145 101 1840 TXL6W1124KZ 1451011840See page 468 for design guide1485Catalogue Numbers1 Emergency versions use a dedicated LED which operates only when in emergency mode2 The ‘P’ prefix sensor is a switching PIR only for use on fixed output control gear (unless in-conjunction with DD and CO for Corridor Function)The ‘D’ prefix sensor is a PIR with photocell, the control gear option dictates the sensor type i.e:Switching with a threshold sensor for FO gear, DALI digital dimming gear uses a regulating photocell version3 ‘P’ and ‘D’ prefix sensors are mounted in the end of the luminaire, they are IP65 rated and suitable for up to 5m mounting heights - note. Thetype ‘P’ and ‘D’ sensors are only suitable for temperature ranges of 0o C to 25o C4 Please refer to the dimension table and diagram for exact dimensions5 The lumen output values are not all available in all lengths, please refer to HF catalogue listing6 ‘Corridor Function’ is a Tridonic specific option available with their dimmable control gear, this ‘CO’ suffix must be added to ensure the correctdriver is used. Add the ‘CO’ after the DD suffix.Luminaire ExampleCat No DescriptionELDTXL5W754KDD T ufflite LED 5’ 4000K, DALI, with integral combined non-maintained emergency functionality and fitted with endmounted IP65 PIR/photocell DALI sensorTwin width housing Narrow width housingNarrow width rear quick fit bracket and tamper proof clip Twin width rear quick fit bracket and tamper proof clip149Cat NoDescription Lumen Output (lm)Circuit Watts (W)Efficacy (Llm/cW)Standard Fixed OutputTXL4N254KZ Tufflite LED 2500 4000K FO 1.2m single 254021.4118.8TXL4N344KZ Tufflite LED 3400 4000K FO 1.2m single 343329.9115.0TXL4N474KZ Tufflite LED 4700 4000K FO 1.2m single 470742.0112.0TXL4W644KZTufflite LED 6400 4000K FO 1.2m twin 640057.5111.5TXL5N274KZ Tufflite LED 2700 4000K FO 1.5m single 279222.6123.6TXL5N364KZ Tufflite LED 3600 4000K FO 1.5m single 361829.8121.4TXL5N514KZ Tufflite LED 5100 4000K FO 1.5m single 515445.0114.7TXL5W554KZ Tufflite LED 5500 4000K FO 1.5m twin 551444.6123.6TXL5W754KZ Tufflite LED 7500 4000K FO 1.5m twin 751863.3118.8TXL5W904KZ Tufflite LED 9000 4000K FO 1.5m twin 903379.2114.1TXL6N534KZ Tufflite LED 5300 4000K FO 1.8m single 530442.9123.5TXL6W954KZ Tufflite LED 9500 4000K FO 1.8m twin 957182.9115.4TXL6W1124KZTufflite LED 11200 4000K FO 1.8m twin11200100.7111.2For emergency versions please add the EL prefix, e.g. TXL5N554KZ becomes EL TXL5N554KZ For emergency versions the circuit watts will increase by 1.5W to account for the charging circuitFor DALI dimmable options please replace the Z suffix with DD e.g. TXL5N554K Z becomes TXL5N554K DD Refer to the catalogue number matrix for other options************************************************************************************************************************Catalogue NumbersBatten fit sensors (IP65 rated), 0°C - 25°C ambient1505For more information on the installation requirements and product specifications, please visit our website: https:///content/gb/en/products/product-catalog/tufflite-led-ip66-impact-resistant-led-industrial-lighting.html。
Philips Lightolier LyteCaster LED下气灯说明书
Downlighting LyteCaster4" Round downlightOrdering guide: TrimExample: L4RDWSeriesL4RLuminaire typeFinishL4R L yteCaster4" RoundD O pen Downlight D Clear diffuse (with white flange)W White (with white flange)B B affle DownlightW White (with white flange)Philips Lightolier LyteCaster LED Downlights are ideal general purposedownlighting solution, providing comfortable, quality light. Available in new construction and remodeler frame with interchangeable light engine that is offered in two lumen packages. The downlight is wet location listed and comes in 3 standard option.Ordering guide: Frame-In kitExample: L4R10AE1VA SeriesL4RLumens 1Frame typeDimmingInput voltageVersionVAL4R L yteCaster4" Roundblank 65010 1000 A A irSeal IC, New Construction, Screw AN A irSeal IC, New Construction, Nail E ELV/Triac dimming 1 120V VA Version A 2Z10 0-10VU Universal06 650101000R A irSeal IC, RemodelerOrdering guide: Light engineExample: L4R10827VA SeriesL4RLumens 1CRICCTVersionVAL4R L yteCaster4" Round06 65010 10008 8027 2700K30 3000K 35 3500K 40 4000K VA Version A 29 9027 2700KNote : Lumen output is calculated based on 80 CRI and 3500K CCT. Please consult adjustmentfactors table on page 4 for other lumen outputs.Complete product = Frame-in kit + Light engine + Trim Order each separately1. W hen ordering a Frame-in kit and a Light engine, the lumen package code must match.2. V ersion A (VA) frames and light engines are not compatible with previous versions.NewconstructionRemodelerwith locking screws.3.Junction Box: 2.5" X 5 3/8" X 2"(27 cu. in) .032" galvanizedsteel. UL listed 90 ˚ supplyconductors. Rated for branchcircuit wiring supplyingconnected luminaires (daisychaining).need of accessories. Barsinstalled on shortest dimensionof frame,but can be easilyrepositioned 90 degreesfrom original position.57/64General purpose downlightBottom viewSide viewSide viewFeatures1. Housing: .032 Aluminum. ULlisted for direct contact withthermal insulation. Integralretaining spring secureshousing to ceilings up to 2"thick. Removable for accessto junction box and ceilingplenum. 5 ½" maximum for usein 2" x 6" joist construction andshallow plenum applications.Airseal® housing minimizesair leakage to less than 2 CFMat 1.57PSF (or 75PA), whichcomplies with the InternationalEnergy Conservation Code,and Washington State EnergyCode (Section 502.4). Thisreduces heat loss andcondensation in ceiling.2.Junction Box: 2 ½" x 2 ½" x 4 ⅞"(29 cu in.) .031” galvanizedsteel. UL listed for 90°Csupply conductors. Rated forbranch circuit wiring supplyingconnected fixtures.3.Retaining clips: Permit easyand fast installation oflight engine/trim.4. Driver:ELV /Triac: 120V,50/60Hz. RoHS compliant,Class 2 power supply. Complieswith FCC rules per Title 47Part 15 (Class B) for EMI / RFI(conducted & radiated). Class Asound rating.0-10V: 120/277V, 50/60Hz.RoHS compliant, Class 2 powersupply. Complies with FCCrules per Title 47 Part 15 (ClassA) for EMI / RFI (conducted &radiated). Class A sound rating.5. Ceiling cutout: 4 ⅜" (111mm).ElectricalLifetime: Expected lifetime50,000 hours and backed bya 5-year warranty.(see /warrantiesfor details)Recommended dimmersSee LED-DIM Specification Sheet.LabelscULus Listed Type I.C., framesare suitable for damp location.Trims are cULus suitable forwet location (no shower lensunit required). Complies withAir Leakage. Energy Star certified.1723General purpose downlightElectrical specificationsmid-flux LED’s.3. Mixing chamber: 98% reflective, highly diffuse film.4. Diffusion lens: (0.06”) thick acrylic opal lens provides an even source of illumination.cutoff to the source.7. Retaining clips: 29 gauge Stainless Steel, allows tool-less installation of light engine to trim.Frame-in kit / Remodeler Lumens Input volts Inputfreq.Input current LED drive current Input power LEDpower THD factor Power factor L4RAE1VA / L4R06RE1VA 650120V 50/60Hz 0.07A 220mA 7W 6W <20%>0.9L4RAZ10UVA / L4R06RZ10UVA 650120V 50/60Hz 0.07A 220mA 8W 6W <10%>0.9277V 50/60Hz 0.04A 220mA 8W 5W <10%>0.9L4R10AE1VA / L4R10RE1VA 1000120V 50/60Hz 0.09A 220mA 11W 9W <20%>0.9L4R10AZ10UVA / L4R10R10UVA1000120V 50/60Hz 0.14A 220mA 12W 9W <5%>0.96277V50/60Hz0.06A220mA12W9W<10%>0.961. Wattage: controlled to within ± 5%2. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products.Angle Mean CP Lumens5101520253035404550556065707580859043843442741439437034130727023018714510469473421941117170192177130703610Zonal lumens & percentagesZone Lumens%Luminaire0-300-400-600-9032851982694234.8%55.1%87.7%100.0%Single unit dataHeight toLighted PlaneInitial Center BeamFoot-CandlesBeamDia. (ft)*5'6'7'8'9'18129756.0'7.2'8.4'9.6'10.8'* B eam diameter is where foot-candlesdrop to 50% of maximum.Multiple unit data - RCR 2Spacingon centerInitial Center BeamFoot-CandlesWattsper Sq. Ft.5'6'7'8'9'39.325.818.415.412.30.460.300.220.180.1438'x38'x10' Room, Workplane 2.5'above floor, 80/50/20% ReflectancesCoefficients of utilizationCeiling80%70% 50%30%0%Wall705030105010501050100RCR Zonal cavity method - Effective floor reflectance = 20%RoomCavityRatio0119119119119116116111111106106100111010610299104971009496928721019488839282898086787539384777182708069776865486756761746172606959575806860546753655363525067462534861475947574744769564842564254425342408645244385138503849383696048403547354634453432105744373244324331423130Light engine: L4R10835VATrim: L4RDW Report no3: 774GFROutput lumens:Input Watts1:Spacing Criterion:941.7 lm10.4 W1.2Efficacy:CCT2:CRI:90.6 lm/W3500 K≥ 80CRI and CCTadjustment factors90CRI 2700K:=0.7180CRI 2700K:=0.8980CRI 3000K:=0.9780CRI 3500K:=1.00© 2016 Philips Lighting Holding B.V. All rights reserved.Philips reserves the right to make changes in specificationsand/or to discontinue any product at any time without noticeor obligation and will not be liable for any consequencesresulting from the use of this publication./luminairesPhilips Lighting North America Corporation200 Franklin Square Drive, Somerset, NJ 08873Tel. 855-486-2216Philips Lighting Canada Ltd.281 Hillmount Rd, Markham, ON, Canada L6C 2S3Tel. 800-668-9008Candela CurvesZonal lumens & percentagesZone Lumens%Luminaire7'8'9'13.010.88.60.140.120.10Light engine: L4R06835VATrim: L4RDW Report no3: 659GFRadjustment factors90CRI 2700K:=0.71 Frame: L4RAE1VA / L4RAZ10UVA / L4R06RE1VA / L4R06RZ10UVAFrame: L4R10AE1VA / L4R10AZ10UVA /L4R10RE1VA / L4R10RZ10UVA。
大功率LED灯珠1W 规格书英文版本
Customer:Description:Customer Service Hotline：400-676-8616TEL：0769-8200 5999 F AX：0769-8200 2227E-MIAL∶chenmo@ FeaturesApplicationsFeature of the device: Small packagewith high efficiencyTypical color temperature: 8500 K . Typical viewing angle: 140°Typical light flux outpu t : 110 LM @ 350m A . ESD protection.Soldering methods: SMTGrouping parameter: Luminous Flux,Forward Voltage and Chromaticity.Moisture Sensitivity Level: 3 Color rendering Index: 80(typ.) Thermal resistance(Junction to Heat sink): 15 °C /WThe product itself will remain within RoHScompliant.Design and effect illumination Interior automotive lighting(e.g. dashboard backlighting)Room lighting (e.g. luminaries, spotlights) Reading light (aircraft, car, bus) Signal and symbol luminariesMarker lights (e.g. steps, exit ways, etc.) Architectural illuminationMaterialsItemsDescriptionHousing black body Heat resistant polymer Encapsulating Resin Silicone resinElectrodes Ag plating copper alloy Die attach Silver paste ChipInGaNHigh Power LED – 1WTaiwan Togia Optoelectronics Technology Co., Ltd.Harsh environment optical efficiency: 72 lm / WHigh Power LED – 1W DimensionsNotes.1. Dimensions are in millimeters.2. Tolerances for fixed dimensions are ± 0.25mm.High Power LED – 1WMaximum Ratings (T Soldering =25ºC)Parameter Symbol Rating Unit DC Operating Current IF400 mAPulsed Forward Current(1)IPF500 mA ESD Sensitivity ESD 2000 VJunction Temperature Tj125 °COperating Temperature Top.-40 ~ +85 °CStorage Temperature Tstge.-40 ~ +100 °CJunction To Heat-Sink Thermal Resistance Rth 15 °C/WElectro-Optical Characteristics(T Soldering =25ºC)Parameter Symbol Min Typ. Max Unit ConditionLuminous Flux (2) Фv100 ..... 110 lmForward Voltage(3)V F---- 3.55 ---- VColor Temperature CCT 8000 ..... 9000 KI F=350mANote.1. tp 100µs, Duty cycle = 0.25≦2. Luminous Flux measurement tolerance: ±10%.3. Forward Voltage measurement tolerance: ±0.1V.Taiwan Togia Optoelectronics Technology Co., Ltd.High Power LED – 1WLuminous Flux Bin Table Group Bin Min Typ. Max1 1.5 ---- 3 23 ----4 3 4 ----5 4 5 ----6 E5 6 ---- 8 1 8 ---- 10 210 ---- 13 3 13 ---- 17 4 17 ---- 20 F5 20 ---- 23 1 23 ---- 27 227 ---- 33 3 33 ---- 39 4 39 ---- 45 J5 45 ---- 52 1 52 ---- 60 2 60 ----70 31 70 ---- 75 32 75 ---- 80 3380 ---- 85 41 85 ---- 90 42 90 ---- 95 43 95 ---- 100 51 100 ---- 110 52 110 ---- 120 K53120----130Group Bin Min Typ. Max11 130 ---- 140 12 140 ---- 150 13 150 ---- 160 21 160 ---- 180 22 180 ---- 200 31 200 ---- 225 32 225 ---- 250 41 250 ---- 275 42 275 ---- 300 51 300 ---- 350 N52 350 ---- 400 1 400 ---- 500 2 500 ---- 600 3 600 ---- 750 4 750 ---- 1000 R 51000----1300High Power LED – 1W Forward Voltage Bin TableGroup Bin Min Typ. Max1 1.75 ---- 1.852 1.85 ---- 1.95 U13 1.95 ---- 2.051 2.05 ---- 2.152 2.15 ---- 2.25 U23 2.25 ---- 2.351 2.35 ---- 2.452 2.45 ---- 2.55 U33 2.55 ---- 2.651 2.65 ---- 2.752 2.75 ---- 2.85 U43 2.85 ---- 2.95 Group Bin Min Typ. Max1 2.95 ---- 3.052 3.05 ---- 3.15 V13 3.15 ---- 3.251 3.25 ---- 3.352 3.35 ---- 3.45 V23 3.45 ---- 3.551 3.55 ---- 3.652 3.65 ---- 3.75 V33 3.75 ---- 3.851 3.85 ---- 3.952 3.95 ---- 4.05 V43 4.05 ----4.151 4.15 ---- 4.252 4.25 ---- 4.35V53 4.35 ---- 4.45 Group Bin Min Typ. Max1 4.45 ---- 5.02 5.0 ---- 5.53 5.5 ---- 6.04 6.0 ---- 6.55 6.5 ---- 7.06 7.0 ---- 7.5O7 7.5 ---- 8.01 8.0 ---- 9.02 9.0 ---- 10.03 10.0 ---- 11.0R4 11.0 ---- 12.0High Power LED – 1WWhite Binning StructureCool White0.240.280.320.360.400.44C I E -YC I E -XNote.This datasheet is a product series datasheet with a list of all possible rankings for the entire Everlight high power portfolio. It does not specify exact bins available for any particular package. Please contact a member of your regional Everlight branch to receive specific binning, exact order codes and individual datasheets for a particular high power LED.Taiwan Togia Optoelectronics Technology Co., Ltd.High Power LED – 1WCool-White Bin Coord inates4550BinCIE X CIE Y BinCIE X CIE Y 0.364 0.383 0.364 0.383 0.367 0.40.362 0.3720.348 0.385 0.346 0.359 U40.347 0.372U50.347 0.372Reference Range: 4500~5000K Reference Range: 4500~5000KBin CIE X CIE Y0.362 0.372 0.36 0.3570.344 0.344 U60.346 0.359Reference Range: 4500~5000K5056BinCIE X CIE Y BinCIE X CIE Y 0.329 0.357 0.329 0.345 0.329 0.3690.329 0.3570.348 0.385 0.347 0.372 V40.347 0.372V50.346 0.359Reference Range: 5000~5650KReference Range: 5000~5650KBin CIE X CIE YBin CIE X CIE Y0.329 0.331 0.329 0.331 0.329 0.3450.344 0.3440.346 0.359 0.343 0.331 V60.344 0.344V70.329 0.32Reference Range: 5000~5650K Reference Range: 5000~5650K 5663BinCIE X CIE Y BinCIE X CIE Y 0.329 0.369 0.329 0.345 0.329 0.3570.316 0.3330.315 0.344 0.315 0.344 W40.314 0.355W50.329 0.357Reference Range: 5650~6300KReference Range: 5650~6300KBin CIE X CIE YBin CIE X CIE Y0.329 0.345 0.329 0.331 0.329 0.3310.329 0.320.317 0.32 0.318 0.31 W60.316 0.333W70.317 0.32Reference Range: 5650~6300KReference Range: 5650~6300KHigh Power LED – 1WBinCIE X CIE Y 0.329 0.321 0.329 0.310.319 0.3 W80.318 0.31Reference Range: 5650~6300K6370BinCIE X CIE YBinCIE X CIE Y 0.301 0.342 0.305 0.322 0.314 0.3550.303 0.3330.315 0.344 0.315 0.344 X40.303 0.333X50.316 0.333Reference Range: 6300~7000KReference Range: 6300~7000KBin CIE X CIE YBin CIE X CIE Y0.308 0.311 0.308 0.311 0.305 0.3220.317 0.320.316 0.333 0.319 0.3 X60.317 0.32X70.311 0.293Reference Range: 6300~7000K Reference Range: 6300~7000K 7080BinCIE X CIE Y BinCIE X CIE Y 0.308 0.311 0.311 0.293 0.297 0.3000.302 0.2830.290 0.318 0.297 0.300 Y6-30.303 0.333Y9-30.308 0.311Reference Range: 7000~8000KReference Range: 7000~8000K 8090Bin CIE X CIE Y Bin CIE X CIE Y 0.289 0.291 0.295 0.276 0.281 0.3090.289 0.2910.290 0.318 0.297 0.300 Y6-20.297 0.300Y9-20.302 0.283Reference Range:8000~9000KReference Range: 8000~9000K 90100Bin CIE X CIE Y Bin CIE X CIE Y 0.283 0.284 0.290 0.270 0.274 0.3010.283 0.2840.281 0.309 0.289 0.291 Y6-10.289 0.291Y9-10.295 0.276Reference Range: 9000~10000KReference Range: 9000~10000KNote.1. X, Y color coordinates measurement tolerance: ±0.01.High Power LED – 1WRelative Spectral Distribution,I F =350mA, T Soldering =25ºC Forward Voltage vs Forward Current, T Soldering =25ºC Relative Luminous Intensity vs Forward Current, T Soldering =25ºCForward Current Derating Curve, Derating based on T j MAX =125°CTypical Electro-Optical Characteristics Curves4005006007008000.00.20.40.60.81.0R e l a t i v e L u m i n o u s I n t e n s t i yWavelength(nm)01002003004005002.62.83.03.23.43.63.8F o r w a r d V o l t a g e (V )Forward Current (mA)01002003004005000.00.20.40.60.81.01.21.4R e l a t i v e L u m i n o u s I n t e n s i t yForward Current (mA)20406080100100150200250300350400Soldering Temperature (oC )F o r w a r d C u r r e n t (m A )Taiwan Togia Optoelectronics Technology Co., Ltd.High Power LED – 1W-80-60-40-200204060800.00.10.20.30.40.50.60.70.80.91.0R e l a t i v e L u m i n o u s I n t e n s i t yDegree (2θ)Typical Representative Spatial Radiation PatternNote.1. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.2. Viewing angle tolerance is ± 10∘.Taiwan Togia Optoelectronics Technology Co., Ltd.High Power LED – 1WReliability DataStress Test Stress Condition Stress Duration Reflow Tsol=260℃, 10sec, 6min 3 timesThermal ShockH：＋100℃20min.'∫ 10sec.'L：－10℃20min.300 CyclesTemperature Cycle H：＋85℃30min.'∫ 5min.'L：－40℃30min.300 CyclesHigh Temperature/HumidityOperationTa=85℃ , RH=60%, IF=225mA 1000hoursRoom Temperature OperationLifeTa=25℃, IF=350mA 1000hoursHigh Temperature OperationLife #1Ta=55℃, IF=350mA 1000hoursHigh Temperature OperationLife #2Ta=85℃, IF=225mA 1000hoursLow Temperature OperationLifeTa=-40℃, IF=350mA 1000hours Failure Criteria:1. LEDs are open or shorted2. lm: luminous flux attenuate difference(1000hrs)>50%3. VF: forward voltage difference(1000hrs)>20%Taiwan Togia Optoelectronics Technology Co., Ltd.High Power LED – 1WPrecautions For UseOver-current-proofAlthough the EHP-AX08 series has a conductive ESD protection mechanism, customermust not use the device in reverse and should apply resistors for extra protection. Otherwise, slight voltage shifts may cause significant current change resulting in burn out failure.1. Storagei. Do not open the moisture proof bag before the devices are ready to use.ii. Before the package is opened, LEDs should be stored at temperatures less than 30℃and humidity less than 50%.iii. LEDs may be stored for 6 months. When the storage time has reached more than 6 months, LEDs should be stored in a sealed container filled with the Nitrogen gas.iv. After the package is opened, LEDs should be stored at temperatures less than 30℃and humidity less than 30%.v. LEDs should be used within 168 hours (7 days) after the package is opened.vi. Before using LEDs, baking treatment should be implemented based on the following conditions: pre-curing at 60±5℃for 24 hours.2. Thermal Managementi. For maintaining the high flux output and achieving maximum reliability, EHP-AX08series LEDs should be mounted on a metal core printed circuit board (MCPCB) or otherkinds of heat sink with proper thermal connection to dissipate approximately 1W ofthermal energy at 350mA operation.ii. Heat dissipation or thermal conduction design is strongly recommended on PCB or MCPCB for reflow soldering purposes. Please refer to soldering patterns on Page 2.iii. Sufficient thermal management must be implemented. Please refer to the graph “Forward Current Derating Curve “ on Page 9. The soldering temperature must be keptunder 60℃ at the driving current 350mA.Otherwise, the junction temperature of diemay exceed over the limit at high current driving conditions and the LEDs’ lifetime maybe decrease dramatically.iv. Special thermal designs are also recommended to take in outer heat sink design, such as FR4 PCB on Aluminum with thermal vias or FPC on Aluminum with thermalconductive adhesive, etc.v. Sufficient thermal management must be conducted, or the die junction temperature will be over the limit under large electronic driving and LED lifetime will decrease critically..High Power LED – 1W3. Proper HandlingTo avoid contamination of materials, damage of internal components, and shortening of LED lifetime, do not subject LEDs to conditions as those listed below.Bare HandTweezersWhen handling the product, do not apply direct pressure on the resin. Do not touch the resin to avoid scratching or other damage.Pick and Place Nozzle for Surface Mount Assembly.During Module AssemblyAvoid directly contacting the lens with nozzle. Do not stack the modules together, it could damage the resin or scratch the lens.High Power LED – 1W4. Soldering Ironi. For Reflow Processa. EHP-AX08 series are suitable for SMT process.b. Curing of glue in oven according to standard operation flow processes.c. Reflow soldering should not be done more than twice.d. In soldering process, stress on the LEDs during heating should be avoided.e. After soldering, do not warp the circuit board.ii. For Manual Soldering Processa. For prototype builds or small series production runs it is possible to place and solder theLED by hand.b. Dispense thermal conductive glue or grease on the substrates and follow its curingspecifications. Gently press LED housing to closely connect LED and substrate.c. It is recommended to hand solder the leads with a solder tip temperature of 280°C forless than 3 second, at a time with a soldering iron of less than 25W. Solder at intervals of two seconds or more.d. Take caution and be aware that damaged products are often a result of improper handsoldering technique.。
ATEX IECEx迪菲 LED高压灯（400、2400、4725lm）说明书
LED/AREA: NEC/CEC EXPLOSIONPROOF/ATEX/IECEx FLAMEPROOF
ATX™ FDLED Series Luminaires
Flameproof
ATEX/IECEx: Zone 1 and 2 - 21 and 22 II2GD Ex d IIB (4725 lm version) Ex d IIB+H2 (2400 lm version) Ex d IIC (400 lm version)
blocks.
Standard Materials
• End caps and cover: aluminum. • Glass tube: tempered borosilicate glass. • O-ring gasket: Nitrile (NBR). • Internal reflector: white powder coated galvanized steel (400 lm
50/60 Hz
LED Power (lm): 04 - 400 lm 25 - 2400 lm 50 - 4725 lm
1
X
Options: (Options must be listed alphabetically) D - Diffused Polycarbonate Lens