KA2425中文资料
RX424024中文资料
V REG.-Nr. A651, Z E214025Contact dataContact configuration 2 COContact setsingle contact Type of interruption micro disconnectionRated current8ARated voltage / max.switching voltage AC 240/400VAC Maximum breaking capacity AC2000VA Limiting making capacity, max 4 s, duty factor 10%15A Contact materialAgNi 90/106AC coil> 1 x 106cycles Rated frequency of operation with / without load 6 / 600 min -1Contact ratings Type Load Cycles RX48A, 250VAC, 70°C, EN61810-14x104RX48A, 250VAC, 70°C, UL508 General purpose4x104Coil dataAC coil24...230VAC AC coiltyp 0,75VAOperative range2Coil insulation system according UL1446class FCoil versions,DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance powerVDC VDC VDC Ohm mW0055 3.50.550+10%5000066 4.20.668+10%529012128.4 1.2274+10%5260242416.8 2.41095+10%5260484833.6 4.84380+10%5260606042.0 6.06845+10%52611011077.011.023010+10%526All figures are given for coil without preenergization, at ambient temperature +23°CS0271-ACoil versions,AC-coil 50HzCoil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power50Hz50Hz50Hz VAC VAC VAC Ohm VA 5242418.0 3.6350+10%0.76 61511586.317.38100+15%0.76 730230172.534.532500+15%0.74 All figures are given for coil without preenergization, at ambient temperature +23°C Insulationrmsopen contact circuit1000 V rmsadjacent contact circuits2500 V rmsClearance/creepage coil-contact circuit W8 / 8 mmadjacent contact circuits W3 / 4 mmMaterial group of insulation parts W IIIaTracking index of relay base PTI 250 VInsulation to IEC 60664-1Type of insulation coil-contact circuit reinforcedopen contact circuit functionaladjacent contact circuits basicRated insulation voltage250 VPollution degree32Rated voltage system 240V400VOvervoltage category IIIOther dataRoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 1)Ambient temperature range-40...+70°COperate- / release time DC coil typ 7 / 2msBounce time DC coil, NO / NC contact typ 1 / 3msVibration resistance (function) NO / NC contact20 / 4g, 10 ... 150 HzShock resistance (destruction) 100 gCategory of protection RTII - flux proof transparent version pcbMounting distance 2,5 mm 2)Resistance to soldering heat flux-proof version270°C / 10 sRelay weight14 gPackaging unit500 pcs12) Version with transparent cover: 5 mmAccessoriesFor standard version (white cover), details seeaccessories RT PCB layout / terminal assignmentBottom view on solder pinsS0163-BJDimensionsS0272-BA *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used.。
SS24中文资料_数据手册_参数
Symbol
Parameter
Value Units
SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210
VRRM
Maximum Repetitive Reverse Voltage
20 30 40 50 60 80 90 100 V
IF(AV)
Maximum Average Forward Current: 0.375-inch Lead Length at TA = 75°C
2.0
A
Non-Repetitive Peak Forward Surge
IFSM Current: 8.3 ms Single Half-Sine
50
A
Wave Temperature Range Operating Junction Temperature
-65 to +150
October 2013
Description
The SS22-S210 series includes high-efficiency, low power loss, general-propose Schottky rectifiers. The clipbonded leg structure provides high thermal performance and low electrical resistance. These rectifier are suited for free wheeling, secondary rectification, and reverse polarity protection applications.
Value
SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210
三一挖机型号发动机型号怎么看
三一挖机型号-发动机型号怎么看发动机型号汇总附件二汽车发动机生产企业基本情况统计表1. 浙江吉奥汽车有限公司2. 江苏省瑞能动力总成有限公司3. 广西玉柴机器股份有限公司4. 北京福田环保动力股份有限公司5. 浙江新柴动力有限公司6. 山西淮海发动机有限责任公司7. 扬州柴油机有限责任公司8. 江西昌河铃木汽车有限责任公司9. 上海日野发动机有限公司10. 江苏南亚自动车有限公司11. 跃进汽车集团公司南京依维柯汽车有限公司12. 南京跃进发动机有限公司13. 跃进汽车集团公司南京东山发动机厂14. 柳州卓丰柳机内燃机有限公司15. 湖南江南汽车制造有限公司16. 贵州航天圆通汽车制造有限公司17. 比亚迪汽车有限公司18. 一汽解放汽车有限公司大连柴油机分公司19. 长安汽车(集团)有限责任公司20. 东风康明斯发动机有限公司21. 沈阳新光华晨汽车发动机有限公司22. 沈阳新光华翔汽车发动机制造有限公司23. 浙江万丰车业有限公司24. 深圳市港鹏发动机有限公司25. 昆明云内动力股份有限公司26. 杭州汽车发动机厂27. 保定长城内燃机制造有限公司28. 秦皇岛津丰发动机机械有限公司29. 上海大众汽车有限公司30. 东风南充汽车有限公司31. 江苏四达动力机械集团有限公司32. 庆铃汽车股份有限公司33. 东风悦达起亚汽车有限公司34. 天津一汽夏利汽车股份有限公司内燃机制造分公司35. 成都云内动力有限公司36. 东风本田发动机有限公司37. 北京现代汽车有限公司38. 广西柳柴动力有限责任公司39. 一拖(洛阳)柴油机有限公司40. 长安福特汽车有限公司41. 江铃汽车股份有限公司42. 奇瑞汽车有限公司43. 东风四川汽车发动机有限公司44. 东风本田汽车有限公司45. 重庆康明斯发动机有限公司46. 一汽解放汽车有限公司无锡柴油机分公司47. 东风汽车有限公司马自达发动机型号CG5广本1998-2002款CG1广本1998-2002款CF9广本1998-2002款CM4广本xx-xx一款06-07一款CM5广本xx-xx一款06-07一款CM6广本xx-xx一款06-07一款RA6 奥德赛2002-xxRB1 奥德赛xx-xx一款07一款FA1 东风思域xx-xx一款09一款GD1 2厢飞度03-06一款08一款GD3 2厢飞度03-06一款08一款GD6 3厢飞度03-06一款07-08叫思迪GD8 3厢飞度03-06一款07-08叫思迪RD5 东风CRV 2002-xxRD7 东风CRV xxRE2 东风xx-xxRE4 东风xx-xxRM1 东风两驱RM2 东风四驱RM3 东风四驱CP1 第8代雅阁xx-2016CP2 第8代雅阁xx-2016CP3 第8代雅阁xx-2016GM2/GM3 锋范2016GE6/GM8 新飞度2016一．日产车型日产车型发动机一览表车辆名称车型系列发动机型号CEFIRO A32，A33 VQ30DE，VQ20DECEDRIC Y31 VG30EY33 VG30DEMAXIMA J30 VG30EINFINITI Q45 FY33，F50 VH41DE，VH45DE，VK45DEINFINITI QX4 R50 VQ35DESUNNY B14 GA16DEN16 QG16DE，QG18DEBLUEBIRD U13 SR20DEURV AN E24 Z20S，TD25E25 KA24DEPICKUP D21，D22 Z24S，NA20S，KA24DEPATROL Y60 TB24，STD42Y61 TB42S，TB45E，TB48DECIVILIAN W40 L28S，ED35W41 L28S，TD42X-Trail T30 QR25DESENTER P12SILV A S15 SR20DETSKYLINE V35QUEST V42 VQ35DEMARCH K12日产中国车型变速箱一览表车型系列手动变速箱型号自动变速箱型号A32 RS5F50A RE4F04AA33 RS5F50A RE4F04BY31 FS5W71C RE4R01AY33 —RE4R01AJ30 RS5F50A RE4R02AFY33，G50 INFINITI —RE4R03AR50 INFINITI QX4 —RE4R01AB14 SUNNY 阳光RS5F30A，RS5F31A RL4F03AN16 SUNNY 阳光RS5F30A，RS5F50A，RS5F70A RE4F03BU13 BLUEBIRD 蓝鸟RS5F50A RL4F03AE24 URV AN 佳奔RS5W71C，R4W71C L4N71BD21 PICKUP 皮卡F4W71C，R4W71C，FS5W71C，RS5W71C L4N71B D22 PICKUP 皮卡FS5W71C，FS5R30A —Y60 PATROL 途乐FS5R50A RE4R03AY61 PATROL 途乐FS5R30A，FS5R50B RE4R03A，RE5R05AW40 RS5W81A，RS5R50A —W41 RS5W81A，RS5R50A —F50西玛—RE5R05AT30(X-TRAIL)奇骏RS5W71C RE4F04B新增部分中文名称车辆名称车型系列发动机型号变速箱型号风雅FUGA Y50 VQ35DE RE5R05A贵士QUEST V42 VQ35DE RE4F04B/RE5F22A美伦奴MURANO Z50 VQ35DE RE4F04B/ RE0F09A贵妇人Fairlady 350Z Z33 VQ35DE RE5R05A/FS6R31AInfiniti QX56 JA60 VK56DE RE5R05A东风日产系列中文名车辆名称系列发动机型号变速箱型号变速箱型号代码蓝鸟BLUEBIRD U13 SR20DE RL4F03A/RS5F50A 32X12 / 32X13 阳光SUNNY HS SR20 RE4F03B/RS5F70A 3AX11天籁TEANA J31 QR20、VQ23、VQ35 RE4F04B/RE0F09A 85X69/85X0485X0C/85X0B/1XD14颐达/琪达TIIDA SC11/ C11 HR16DE RE4F03B/RS5F91R 3CX02 轩逸SYLPHY G11 MR20DE/HR16DE RE0F10A 1XF00/3CX02 骏逸GENISS L10 MR18DE RE4F03B/RS6F94R 31020-3CX0D 骊威GENISS L10 HR16DE RE4F03B/RS5F91R 31020-3CX3D日野发动机型号日野F1 C7、F7E、11F7D、F2C、0F21C、H0C、6H7C0、H0D7、HE700、FE550、FE570、K13C、13K、DE1K0、0R2E0、0EM001、V2C、1V22、CV25C、V6C2、0J8、WC06、WE40D、DF46、E6TPF、C44、F1C61、4FC661F、G17、123、175、177、70J8、CK3L4、050、5406E、H10、0E7H0、F016/CW60ERJ172/E、H070、RC412DK2/0S、H363/E75F、0F17G/EH07、RR3H/0H7D0、CR40/2DK0、2F27/EKS010R、2E1/0BE04、ZM0040343/4KE010RE、020/BE020、S30S0/K3CT、1RR17/E27H00发动机型号对照表东风康明斯发动机配件气门结构:直列4缸吸气方式:自然吸气或增压排量:升缸径*冲程102x120mm关于单减桥和轮边减速桥以下内容来源：，转载请注明出处在最近的工作中,经常遇到客户把轮边减速桥当做好宝贝.不论什么车都要配轮边减速桥的事情.对于这个问题我有些个人想法但一直不确定正确与否.发出来请大虾们赐教指正我这边很多客户在问好车的时候经常问”是免保桥吗?”,似乎在他们眼里”免保桥”就是个新科技产品,配上就是好的.我个人一直认为,长途运输方面,目前最好的桥就是单减桥.轮边减速桥”牙包”小,速比大,是为了工程车辆应对复杂恶劣道路环境设计的产品,扭矩更强,通过性更好.也更扎实易于保养.但是1.轮边减速桥摩擦力远高于轴承的单减桥,能量损耗高,费油;2.摩擦强就易于产生热,容易高温,尤其不适合重栽长途跋涉.3.齿轮毕竟做不到轴承的间隙小,轮胎安装的不够稳定,容易吃胎,轮胎损耗高.所以,长途运输车主选择轮边减速桥是个自重重,通过性优点没用,速比大跑的慢,油耗高,易高温爆胎,精密性不足吃胎的极错误选择.各种型号挖机发动机型号表各种型号挖机发动机型号表转载自挖掘机医生转载于2016年03月16日20:33 阅读(64) 评论(0) 分类：个人日记举报各种型号进口挖掘机所配制的发动机型号表机型发动机机型发动机机型发动机机型发动机PC100-1 S4D105-5 EX60-2 BD30 HD250 4D31 E40B 4D32PC100-3 6D95L EX90 4BD1 HD250SE S4F E70 4D31PC100-5 S4D95L-1 EX100 4BD1 HD300GS 6DS70 E70B 4D32PC120-1 S4D105-5 EX100W 6BB1 HD350G 6DS30 E110 4D31TPC120-3 6D95L EX100WD-2 6BB1 HD400/450 6DS70 E110B S4K-TPC120-5 S4D95L-1 EX100-2 4BD1-T1 HD400G 6DS70 E120B S4K-T PC150-1 6D105 EX100-3 4BD1-T1 HD500/550 6DS70 E120/140 6D14PC150-3 S6D95L EX120 4BD1-T HD400SE 6D14 E180 6D14-TPC200-1 6D105-1 EX120-2 4BD1-T HD400SEV 4D31RCT E200/B S6K-T PC200-2 S6D105 EX120-3 4BD1-T HD400-5 6D31T E240 6D15-TPC200-3新S6D105 EX120-5 4BG1 HD450SE E240B 3116-TPC200-3旧S6D105 EX130 4BG1 HD510 4D31-T E300 4SA1PC200-5 SA6D95L EX150 4BD1-T HD512 6D31-T E300B 4SA1PC200-6 S6D95L EX160WD 6BB1 HD550SE 6D14C E450 6D22-TCPC200-6S6D102E-1-A EX200EX200-1旧6BD1-T HD550G 6DS70 E650 S6B-TAPC200-7 EX200-1 6BD1-T HD820-2 6D31-T 235B/C/D 3306PC210-5 SA6D95L EX200-2 6BD1-T HD700SE 6D14CT 245B/D 3406 PC210-6 S6D95L EX200-3 6BD1-T HD700G 6D11C 307/C 4D32PC220-1 S6D105 EX200-5 6BG1 HD700-5 6D31-T 311BPC220-2 S6D105 EX220 H06RCT HD700-5新6D31-T 312C/CLPC220-3 S6D105-1 EX220-2 H06C-T HD700-7 6D31-T 315C/CLPC220-5 SA6D95L EX220-3 H06C-T HD800-5/7 318BPC220-6SA6D102E-1-A EX270 H06CT-1 HD850GSHD880 6D22 320/320L旧3066PC220-7 EX270-2 H06CT-1 HD8206D34 320/L新3066PC230-6 SA6D95L EX300 EP100T HD880SE-1/2 6D15RCT 320B/BL 3166 PC300 N855 EX300-1 ERP100T HD900SEV 6D15RCT 320C/CLPC300-1 NT855 EX300-2/3 6SD1-T HD900-2 6D14CT 322/322L 3116PC300-2 NT855 EX300-5 6BG1T HD900-5/7 325/325L 3116PC300-3 S6D125-1 EX400 6RB1-T HD1023 325B/BLPC300-5 S6D108-1 EX400-3 HD1100 NH220 325CPC300-6 SAA6D108E-2 EX400-5 HD1200G 6D20C 330/330L 3306 PC310 S6D108-1 UH-035/7 4BB1 HD1220SE 6D22RCT 330B/BL 3306 PC350 S6D108-1 UH04/2/5 6BB1 HD1250SEV 6D22T 330C PC400-1 NT855 UH05 EC100 HD1250-7 6D22T 345BPC400-3 S6D125-1 UH055-7 6BB1HD1430 350/350L 3306 PC400-5 S6D125-1W UH06 DA640 HD1500 NH220-V 375N 3406 PC400-6 SA6D125E-2 UH06-5 6BD1 HD1800G NH220-VPC410 S6D125-1 UH07-7 6BD1-T HD1880SE 8DC9本文链接：。
24c02中文官方资料手册pdf
ｗ 址输入脚 A0 A1 A2 可悬空或连接到 Vss 如果只有一个 24WC01 被总线寻址 这三个地址输入
脚 A0 A1 A2 必须连接到 Vss
当使用 24WC04 时最多可连接 4 个器件 该器件仅使用 A1 A2 地址管脚 A0 管脚未用 可以连
符号
参数
最小
典型
最大 单位
测试条件
ICC 电源电流
3
mA
FSCL=100KHz
ISB ILI ILO VIL VIH VOL1 VOL2
备用电流(Vcc=5.0V) 输入漏电流 输出漏电流 输入低电压 输入高电压 输出低电压 输出低电压
1 Vcc 0.7
0
A
10
A
10
A
Vcc 0.3 V
Vcc+0.5 V
s
tHD: DAT
数据输入保持时间
0
0
ns
tSUl: DAT
数据输入建立时间
50
50
ns
tR
SDA 及 SCL 上升时间
1
0.3
s
tF
SDA 及 SCL 下降时间
300
300
ns
tSU: STO
停止信号建立时间
4
0.6
s
tDH
数据输出保持时间
100
100
ns4Biblioteka 海纳电子资讯网： ｗｗｗ．ｆｐｇａ－ａｒｍ．ｃｏｍ
上电时序
符号
参数
最大
单位
tPUR
上电到读操作
1
Z23S2445M01中文资料(AEROVOX)中文数据手册「EasyDatasheet - 矽搜」
•单和双额定值 - 双额定值
在SuperMet仅
所有SuperMet和ZEMAX电容TM集成•
60000小时使用寿命.
UL认证压敏灭弧删除•
电容稳定性±整个人生3％
电容器从电路在生命尽头.
•自清除金属化聚丙烯薄膜.
• 专利压力灭弧符合UL810
每个电容器填充有环氧化Soybeanoil
要求.
电介液.大豆油已被证明可靠性
所有AEROMET II电容都可以用时间和成本节约
EIA RS-186-3E状态测试要求.
AeroMount系统.触点厂家触点厂家对于需要reycled了解详细信息.
认证证书
EIA RS-186-2E湿度测试要求（TropiCAL条件）.
• UL文件号E51176
• CSA文件号058450
• VDE认证可用
电气特性
• 温度范围：-40〜+ 70℃.源自• 电容范围3至80μF.
• 电容公差±10％.
• 电压范围240至480 VAC,60赫兹.
• 损耗因数0.1％以下
@ 60赫兹和25℃.
• 绝缘电阻千M
●μF.
•耐电压.
• 期限至足月1.75×WVAC
• 期限到案2×WVAC + 1KVAC
应用
• 窗式空调 • 单元式空调 • 电动汽车 • 风扇与鼓风机 • Pumps • 洗衣房设备 • 除湿机
注入
P = Supernol（M系列） S = SuperSoy（Z系列）
电压编码 电压第一个两位数
24 = 240 V交流 33 = 330 V交流 37 = 370 V交流 44 = 440 V交流 48 = 480 V交流 60 = 600 Vac
SN24中文资料
Symbols
SN21
SN22
SN23
SN24
SN25
Units
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=75 Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at rated DC blocking voltage TA=25 TA=125
VRRM VRMS VDC I(AV) IFSM VF IR Trr CJ R R
JA JL
200 140 200
400 280 400
600 420 600 3.0 100.0 1.20 5.0 250.0 2.0 60.0 47.0 13.0 -55 to +150
800 560 800
1300 920 1300
TJ, TSTG
1
元器件交易网
RATINGS AND CHARACTERISTIC CURVES
2
元器件交易网
SN21 THRU SN25
SURFACE MOUNT GENERAL PURPOSE PLASITC RECTIFIER Reverse Voltage - 200 to 1300 Volts Forward Current - 3.0 Amperes
FM24系列中文资料
直流参数
推荐参数的适用工作条件：TA = -40°C ~ +85°C，VCC = +2.2V ~ +5.5V，（除非另有说明）。
符号 VCC
ICC1
ICC2
ISB1 ISB2 ILI ILO VIL1 VIH1 VOL
参数 电源电压
电源电流
电源电流
等待态电流 等待态电流 输入漏电流 输出漏电流 输入低电平 输入高电平 输出低电平
最小值 2.2
-0.6 VCCx0.7
典型值 0.4 2.0
0.10 0.05
最大值
单位
5.5
V
1.0
mA
3.0
mA
1.0
µA
6.0
µA
3.0
µA
3.0
µA
VCCx0.3
V
VCC+0.5
V
0.4
V
注：1. VIL 最小值和 VIH 最大值未经测试，仅供参考。
FM24C02/04/08(A)/16 两线制串行 EEPROM
Trademarks
Shanghai Fudan Microelectronics Co., Ltd name and logo, the “复旦” logo are trademarks or registered trademarks of Shanghai Fudan Microelectronics Co., Ltd or its subsidiaries in China.
封装类型
产品特点
z 工作电压：2.2V～5.5V z 内部结构：256 x 8 (2K)，512 x 8 (4K)，1024 x 8 (8K)
或 2048 x 8 (16K) z 两线串行接口 z 输入引脚经施密特触发器滤波抑制噪声 z 双向数据传输协议 z 兼容100KHz(2.2V)和400KHz(5V)操作 z 支持硬件写保护 z 支持8字节(02)，16字节(04、08、08A、16) 页写模式 z 支持部分页写 z 写周期内部定时(小于5 ms) z 高可靠性：
24、25、93系列存储器介绍
93系列Microwire总线型Microwire总线采用时钟(CLK)、数据输入(DI)、数据输出(DO)三根线进行数据传输，接口简单。
Microchip公司的93XXX系列串行E2 PROM存储容量从1k bit(×8/×16)至16k bit(×8/×16)，采用Microwi re总线结构。
产品采用先进的CMOS技术，是理想的低功耗非易失性存储器器件。
1引脚93XX系列串行E2PROM的产品很多，附图是93AA46型1k 1.8V Microwire总线串行E2PROM的引脚图。
CS是片选输入，高电平有效。
CS端低电平，93AA46为休眠状态。
但若在一个编程周期启动后，CS由高变低，93AA46将在该编程周期完成后立即进入休眠状态。
在连续指令与连续指令之间，CS必须有不小于250ns（TCSL)的低电平保持时间，使之复位(RESET)，芯片在CS为低电平期间，保持复位状态。
CLK是同步时钟输入，数据读写与CLK上升沿同步。
对于自动定时写周期不需要CLK信号。
DI是串行数据输入，接受来自单片机的命令、地址和数据。
DO是串行数据输出，在DO端需加上拉电阻。
ORG是数据结构选择输入，当ORG为高电平时选×16结构，ORG为低电平时选×8结构。
2工作模式根据单片机的不同命令，93AA46有7种不同的工作模式，附表给出在ORG=1(×16结构)时的命令集(表中“S”为Start位)。
ORG=0(×8结构)，除在地址前加A6位或在地址后加一位“X”外，其余与附表相同。
除了读数据或编程操作期间检查READY/BUSY状态时外，DO脚均为高阻状。
在擦除/写入过程中，DO为高电平表示“忙”，低电平表示“准备好”。
在CS下降沿到来时，DO进入高阻态。
若在写入和擦除转换期间，CS保持高电平，则DO端的状态信号无效。
3功能START(起始)条件CS和DI均为高电平后CLK的第一个上升沿，确定为START。
AR25M资料
AR/S25A – AR/S25M25A AUTOMOTIVE BUTTON DIODESingle Phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%.CharacteristicSymbol AR/S 25A AR/S 25B AR/S 25D AR/S 25G AR/S 25J AR/S 25K AR/S 25M UnitPeak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRMV RWM V R 501002004006008001000V RMS Reverse VoltageV R(RMS)3570140280420560700V Average Rectified Output Current @T C = 150°C I O25ANon-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) at T J = 150°C I FSM 400A Forward Voltage @I F = 25A V FM 1.0V Peak Reverse Current @T A = 25°C At Rated DC Blocking Voltage @T A = 100°C I RM 5.0250µA Reverse Recovery Time (Note 1)t rr 3.0µS Typical Junction Capacitance (Note 2)C j 300pF Typical Thermal Resistance Junction to Case (Note 3)R JC 1.0K/W Operating and Storage Temperature Range T J , T STG-50 to +175°CPolarity and Voltage Denotation Color BandRedYellowSilverOrange GreenBlueViolet*Glass passivated forms are available upon requestNote: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.3. Thermal Resistance: Junction to case, single side cooled.W T EWER SEMICONDUCTORS40608010012014016018005.010152025I ,A V E R A G E F O R W A R D R E C T I F I E D C U R R E N T (A )(A V )T ,CASE TEMPERATURE (ºC)Fig.1Forward Current Derating CurveC C ,C A P A C I T A N C E (p F )j V ,REVERSE VOLTAGE (V)Fig.4T ypical Junction CapacitanceR 1.0101001010010001.010100I ,P E A K F O R W A R D S U R G E C U R R E N T (A )F S M NUMBER OF CYCLES AT 60HzFig.3Max Non-Repetitive Peak Fwd Surge Current40030020001005000.60.8 1.0 1.2 1.4 1.60.11.010I ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A )F V ,INSTANTANEOUS FORWARD VOLTAGE (V)Fig.2Typical Forward CharacteristicsF 100ORDERING INFORMATIONProduct No.Package TypeShipping QuantityAR25A 10mm Button 1000 Units/Box ARS25A 8.6mm Button 1000 Units/Box AR25B 10mm Button 1000 Units/Box ARS25B 8.6mm Button 1000 Units/Box AR25D 10mm Button 1000 Units/Box ARS25D 8.6mm Button 1000 Units/Box AR25G 10mm Button 1000 Units/Box ARS25G 8.6mm Button 1000 Units/Box AR25J 10mm Button 1000 Units/Box ARS25J 8.6mm Button 1000 Units/Box AR25K 10mm Button 1000 Units/Box ARS25K 8.6mm Button 1000 Units/Box AR25M 10mm Button 1000 Units/Box ARS25M8.6mm Button1000 Units/BoxShipping quantity given is for minimum packing quantity only. For minimum orderquantity, please consult the Sales Department.Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice.WARNING : DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval.We power your everyday.Won-Top Electronics Co., Ltd.No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410Fax: 886-7-822-5417Email: sales@Internet: 。
keithley(吉时利)2450,2460中文手册
在触摸屏上选择项目 .................................................................................................................. 2-5 滚动条 ....................................................................................................................................... 2-6 交互式滑动屏............................................................................................................................. 2-6 菜单概述.................................................................................................................................... 2-9 将测量值存储到 U 盘 ........................................................................................................ 2-10 将屏幕截图存储到 U 盘..................................................................................................... 2-10
ES25A24-240中文资料(Mean Well)中文数据手册「EasyDatasheet - 矽搜」
20〜25W AC-DC单输出桌面
ES25A 系列
产品特点 ：
通用交流输入/全范围 3极AC入口IEC320-C14
动力类（带接地引脚）
满输出5〜48V安全认证 防护护功能：短路/过载/过电压
全封闭塑胶外壳
PWM 3842控制电路和规范 LED电源指示灯 认证：UL / CUL / TUV/ BSMI / CB / FCC / CE 1年防护修
额定功率（最大）
20W
22W
25W
25W
25W
25W
25W
25W
25W
25W
输出
纹波及噪音（最大） Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p 240mVp-p
电压容差
Байду номын сангаас
Note.4 5.0%
直流电压
Note.2 5V
7.5V
9V
12V
15V
18V
24V
28V
36V
48V
额定电流
4.0A
2.93A 2.77A 2.08A 1.66A 1.38A 1.04A 0.89A 0.69A 0.52A
电流范围
0.4 ~ 4.0A 0.3 ~ 2.93A 0.2 ~ 2.77A 0.1 ~ 2.08A 0.1 ~ 1.66A 0.1 ~ 1.38A 0.1 ~ 1.04A 0.1 ~ 0.89A 0.06 ~ 0.69A 0.05 ~ 0.52A
260
输入电压
TEMP.系 数
0.03% / (0~50 )
AK4524资料
Note: All input pins except pull-down pins should not be left floating.
M0050-E-01 -4-
1999/5
元器件交易网
ASAHI KASEI [AK4524]
ABSOLUTE MAXIMUM RATINGS
元器件交易网
ASAHI KASEI [AK4524]
AK4524
24Bit 96kHz Audio CODEC
GENERAL DESCRIPTION The AK4524 is a high performance 24bit CODEC for the 96kHz recording system. The ADC has an Enhanced Dual Bit architecture with wide dynamic range. The DAC uses the new developed Advanced Multi Bit architecture and achieves low outband noise and high jitter tolerance by use of SCF (switched capacitor filter) techniques. The AK4524 has an input PGA and is well suited MD, DVTR system and musical instruments. FEATURES · 24bit 2ch ADC - 64x Oversampling - Single-End Inputs - S/(N+D): 90dB - Dynamic Range, S/N: 100dB - Digital HPF for offset cancellation - Input PGA with +18dB gain & 0.5dB step - Input DATT with -72dB att - I/F format: MSB justified or I2S · 24bit 2ch DAC - 128x Oversampling - 24bit 8 times Digital Filter Ripple: ±0.005dB, Attenuation: 75dB - SCF - Differential Outputs - S/(N+D): 94dB - Dynamic Range, S/N: 110dB - De-emphasis for 32kHz, 44.1kHz, 48kHz sampling - Output DATT with -72dB att - Soft Mute - I/F format: MSB justified, LSB justified or I2S · High Jitter Tolerance · 3-wire Serial Interface for Volume Control · Master Clock - X’tal Oscillating Circuit - 256fs/384fs/512fs/768fs/1024fs · Master Mode/Slave Mode · 5V operation · 3V Power Supply Pin for 3V I/F · Small 28pin VSOP package
SS24中文资料_数据手册_参数
Ordering Information
Part Number SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210
Marking SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210
SMB/DO-214AA
COLOR BAND DENOTES CATHODE
Value
SS22 SS23 SS24 SS25 ຫໍສະໝຸດ S26 SS28 SS29 S210
500
700
850
0.4
10
Units mV mA
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at /site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
KSP24资料
KSP24NPN Epitaxial Silicon TransistorAbsolute Maximum Ratings T a =25°C unless otherwise notedElectrical Characteristics T a =25°C unless otherwise notedSymbol ParameterValue Units V CBO Collector-Base Voltage 40V V CEO Collector-Emitter Voltage 30V I EBO Emitter-Base Voltage 4.0V I C Collector Current100mA P C Collector Power Dissipation (T a =25°C)350mW Derate Above 25°C 2.8mW/°C T J Junction Temperature 135°C T STG Storage Temperature-55~150°C R TH (j-a)Thermal Resistance, Junction to Ambient357°C/WSymbol ParameterTest Condition Min.Typ.Max.Units BV CBO Collector-Base Breakdown Voltage I C =100µA, I E =040V BV CEO Collector-Emitter Breakdown Voltage I C =1mA, I B =030V BV EBO Emitter-Base Breakdown Voltage I E =10µA, I C =0 4.0V I CBO Collector Cut-off Current V CB =15V, I E =050nAh FE DC Current GainV CE =10V, I C =8mA 30f T Current Gain Bandwidth Product V CE =10V, I C =8mA, f=100MHz400620MHz C ob Output CapacitanceV CB =10V, I E =0, f=1MHz 0.250.36pF G CE Conversion Gain (213 to 45MHz)V CC =20V, I C =8mAOscillator Injection=150mV 1924dB G CEConversion Gain (60 to 45MHz)V CC =20V, I C =8mAOscillator Injection=150mV2429dBKSP24VHF Transistor1. Base2. Emitter3. CollectorTO-921KSP24DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to performwhen properly used in accordance with instructions for useprovided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can bereasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.A CEx™Bottomless™CoolFET™CROSSVOLT ™DenseTrench™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet Series™FAST ®FASTr™FRFET™GlobalOptoisolator™GTO™HiSeC™ISOPLANAR™LittleFET™MicroFET™MICROWIRE™OPTOLOGIC™OPTOPLANAR™PACMAN™POP™Power247™PowerTrench ®QFET™QS™QT Optoelectronics™Quiet Series™SLIENT SWITCHER ®SMART START™STAR*POWER™Stealth™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TruTranslation™TinyLogic™UHC™UltraFET ®VCX™STAR*POWER is used under license。
KA2418B资料
current hysteresis • Adjustable activation voltage • Internal zener diodes to protect against over
8-DIP-300
FEATURES
• Built-in full wave bridge diode rectifier • Low current consumption, in order to allow the
parallel operation of the 4 devices • Few external components • Tone and adjustable switching frequencies by
Symbol
VCC ICC VON VONR VSUS RD(OFF) V0(P-P) ISC
Test Conditions
VS = 8.8 to 26V
RA = 1KΩ
VS = 26V
Min
12.2 8 8 6.4
-
Typ
1.5
VCC-3 35
Max
26 1.8 13 10 8.8
-
Unit
V mA V V V KΩ V mA
-
2300
-
Байду номын сангаас
HZ
1700
-
HZ
-
1900
-
HZ
1300
-
HZ
0.1
-
15
KHZ
-
10
6K24-G资料
Case: Molded plastic body over nitride passivated die Terminals: Axial leads solderable per MIL-STD-750, Method 2026Polarity: Color band denotes positive end (cathode)Weight: 0.07oz., 2.1g Mounting Position: AnyMechanical Data:Maximum Ratings and Thermal Characteristics (T A =25ºC unless otherwise noted)Electrical Characteristics (T A =25ºC unless otherwise noted)Designed for under the hood applications Plastic package has underwriters laboratory Flammability classification 94V-0Exclusive patented PAR® oxide passivated chip constructionLow incremental surge resistanceIdeally suited for automotive “load dump” applications High temp. soldering guaranteed: 300ºC/10 seconds,0.375" (9.5mm) lead length, 5lbs. (2.3kg) tensionFeatures:Stand-off Voltage: 24 VoltsPeak Pulse Power: 6000W (10/1000μs)Note: (1) Non-repetitive current pulse, per Fig. 2, with a 10/1000μs waveform (4) Measured on 80μs square pulse width(2) Non-repetitive current pulse, per Fig. 5, with 10μs/50ms waveform (5) Measured on 300μs second square pulse width (3) Measured on 8.3ms half sine-wave, or equivalent square wave, (6) Mounted on copper pad area of 1.6x1.6”duty cycle = 4 pulses maximum(40x40mm) per Fig. 5ParameterPeak pulse power dissipation w/ 10/1000 μs waveform (1)Peak pulse power dissipation w/ 10μs/50ms waveform (2)Steady state power dissipationlead length 0.375” (9.5mm), TL = 85ºC (6)Max. working stand-off voltagePeak forward surge current, 8.3ms single half sine-wave (3)Operating junction and storage temperature rangeSymbol P PPM P PPM P M(AV)V WM I FSM T J,T STGLimit 600020006.524400-65 to +185Unit W W W V A ºCMax. DC reverse leakage current T A = 25ºC at Vwm = 24V T A = 150ºC Reverse Breakdown Voltage T A = 25ºC min.at 100mA T A = 25ºC max. T A = 150ºC min. T A = 150ºC max.Max. clamping voltage T A = 25ºC at Ipp = 90A (4) T A = 150ºC Max. instantaneous forward voltage at 100A (5)I DV (BR)V C V FμAVV V1.05026.732.629.636.740451.8°Fig. 1 – Peak Puls e Power R ating Curve Fig. 5 – 10μs /50ms P uls e WaveformFig. 2 – 10/1000μs P uls e WaveformRating and Characteristic Curve (6KA24-G) (T A =25ºC unless otherwise noted)。
国产S型源表与2400,2450的区别
国产S型源表与2400,2450的区别
国产S型源表与2400,2450及B2900相比有哪些不同？
①、2400为吉时利第一代数字源表，单通道，不支持脉冲输出，纯按键操作，数码管显示，支持串口及GPIB通信，不支持以太网通信；
②、2450为泰克收购吉时利后推出的新一代数字源表，单通道，不支持脉冲输出，触摸屏操作，支持串口、以太网及GPIB通信；
③、B2900系列为是德推出的数字源表，有单通道和双通道版本，支持脉冲输出，彩色液晶显示屏，按键操作，支持串口、以太网及GPIB通信；
④、S型源表国产自主研发，单通道，不支持脉冲输出，触摸屏操作，支持多种通讯方式，RS-232、GPIB及以太网；最大输出电压达300V，最小测试电流达100pA，支持USB存储，一键导出数据报告，S系列源表价格优势明显；
具体参数对比如下：
S型源表的测试功能。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
KA2425A SPEECH NETWORK WITH DIALER INTERFACE
INTRODUCTION
The KA2425A is telephone speech network integrated
circuit which includes transmit amp, receive amp,
side tone amp, DC loop interface function, DTMF input,
voltage regulator for speech, a regulated output voltage
for a dialer, and equalization circuit .
FEATURES
•Low voltage operation (1.5v : speech)
• Transmit, receive, side tone and DTMF level are
controlled by external resistors
• Regulated voltage for dialer
• Loop length equalization
• MUTE function
• Linear interface for DTMF
PIN CONFIGURATION
Fig. 1
KA2425A SPEECH NETWORK WITH DIALER INTERFACE
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS (Ta = 25°C)
ELECTRICAL CHARACTERISTICS (T a = 25°C)
Characteristic Symbol
Value Unit V + Voltage V DD (V + = 0)MT,MS inputs V LR
Storage Temperature
V C V DD V M V LR T STG
-1.0 ~ +18-1.0 ~ +6-1.0 ~ V DD +1-1.0V~ V + -3.0-65 ~ +150
V V V V °C
Characteristic Symbol
Value Unit I TXO (Instantaneous)V + (Voltage :Speech Mode Tone Dialing Mode Operating Temperature
I CC V + (SM)V +(TM)T ORR
0 ~ 10+1.5 ~ +15+3.3 ~ +15-20 ~ +60
mA V V °C
KA2425A SPEECH NETWORK WITH DIALER INTERFACE
ECTRICAL CHARACTERISTICS (Continued)
Characteristic Symbol Test Conditions Min Typ Max Unit SYSTEM AMPLIFIERS
T X
Gain
TXO Bias Voltage TXO Bias Voltage TXO Bias Voltage TXO Bias Voltage TXI input Resistance
G V (TX)
V BIAS (SPM)
V BIAS (TM)
V OL (SPM)
V OL (SPM)
R I (TXI)
TXI to TXO
Speech/Pulse Mode
Tone Mode
Speech/Pulse Mode
Speech/Pulse Mode
24
0.45
V R -25
V R -25
-
-
26
0.52
V R -5.0
V R -5.0
125
10
28
0.60
-
-
250
-
dB
xV R
mV
mV
mV
KΩ
R X
RXO Bias voltage RXO Source current RXO Source current RXO High Voltage RXO Low Voltage
V BIAS (AM)
I SOURCE (SM)
I SOURCE (PTM)
V OH (AM)
V OL (AM)
All Mode
Speech Mode
Pulse/tone Mode
All Mode
All Mode
0.45
1.5
200
V R -100
-
0.52
2.0
400
V R -50
50
0.60
-
-
-
150
xV R
mA
µA
mV
mV
SIDETONE AMPLIFIER Gain (TXO to STA)
Speech Mode Speech Mode Pulse Mode Pulse Mode @V LR = 0.5V
@V LR = 2.5V
@V LR = 0.2V
@V LR = 1.0V
-
-
-
-
-15
-21
-15
-21
-
-
-
-
dB
STA Bias Voltage V BIAS (STA)All Modes0.650.80.9xV R MICROPHONE, RECEIVER CONTROLS
MIC Saturation Voltage V SAT (MIC)Speech Mode,1 = 500µA-50125mV MIC Leakage Current I LKG (MIC)Dialing Mode, Pin 1=3.0V-0 5.0µA
R RMT (SM) R RMT (DM)Speech Mode
Dialing Mode
-
5.0
8.0
10
15
18
Ω
KΩ
RMT Delay t D (RMT)Dialing to Speech 2.0 4.020ms EQUALIZATION AMPLIFIER
GAIN (V + to EQ)
Speech Mode
Speech Mode Pulse Mode Pulse Mode G V (EQ)
@ V LR = 0.5V
@ V LR = 2.5V
@ V LR = 0.2V
@ V LR = 1.0V
-
-
-
-
-12
-2.5
-12
-2.5
-
-
-
-
dB
EQ Bias Voltage
Speech Mode Pulse Mode Speech, Pulse Mode V BIAS (EQ)@ V LR = 0.5V
@ V LR = 0.5V
@ V LR = 2.5V
-
-
-
0.66
1.3
3.3
-
-
-
V dc G V (STA)
RMT Resistance
KA2425A SPEECH NETWORK WITH DIALER INTERFACE ELECTRICAL CHARACTERISTICS (Continued)
KA2425A SPEECH NETWORK WITH DIALER INTERFACE APPLICATION CIRCUIT。