2、EMOSS-BSP2.0介绍v4
PCIe2 2端口10GbE Base-T, PCIe2 4端口(10GbE SFP+和1GbE R
®PCIe2 2-Port 10GbE Base-T, PCIe2 4-Port (10GbESFP+ & 1GbE RJ45) Adapter Families for IBM Power SystemsIBM Redbooks Product GuideThis IBM® Redbooks® Product Guide describes the PCIe2 2-Port 10GbE Base-T Adapter and PCIe24-Port (10GbE SFP+ & 1GbE RJ45) Adapter products. These are PCI Express Generation 2 (PCIe2) x8, short form-factor, low-profile capable, regular height network interface card (NIC) adapters. The 2-port adapters enable affordable 10-Gigabit Ethernet (10GbE) network performance with cost-effective RJ45 connections for distances up to 100 meters. The 4-port adapter enables affordable 10-Gigabit Ethernet (10GbE) network performance over SFP+ Multimode Fiber SR optical modules and also supports SFP+ Active Copper cables, depending on the Ethernet switch used. They are compatible with the installed base of GbE switching and cabling infrastructure commonly deployed today.Figure 1. PCIe2 2-Port 10GbE Base-T AdapterDid you know?These network adapters offer an ideal solution for IBM Power System servers that require high-speed data transfer in LAN connectivity for mission-critical applications using existing, affordable cabling and switching IT infrastructure. The adapters provide support for 10Gb networking with CAT 6 copper cable connectivity with the two built-in RJ45 ports. The four-port adapter provides support for 10Gb SFP+ SR fiber or SFP+CU active Copper cable connectivity and 1Gb RJ45 CAT 5/5e cable connectivity.Figure 2 shows the PCIe2 4-Port (10GbE SFP+ & 1GbE RJ45) Adapter.Figure 2. PCIe2 4-Port (10GbE SFP+ & 1GbE RJ45) AdapterPart number informationTable 1 contains the part numbers and feature codes for ordering these adapters.Table 1. Ordering part numbers, CCINs, and feature codesDescription Part number CCIN Feature code PCIe2 2-port 10 GbE BaseT RJ45 Adapter00E27182CC4EN0WPCIe2 LP 2-port 10 GbE BaseT RJ45 Adapter00E27182CC4EN0XPCIe2 4-Port (10Gb+1GbE) SR+RJ45 Adapter00E27192CC3EN0SPCIe2 LP 4-Port (10Gb+1GbE) SR+RJ45 Adapter00E27192CC3EN0TPCIe2 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapter00E27192CC3EN0UPCIe2 LP 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapter00E27192CC3EN0VPCIe2 4-Port (10Gb+1GbE) SR+RJ45 Adapters and PCIe2 4-port (10Gb+1GbE) Copper SFP+RJ45 Adapters specifications (CCIN: 2CC3 FC: EN0S, EN0T, EN0U, and EN0V):Adapter field-replaceable unit (FRU) number: 00E2715 (complies with RoHS requirement)●Low-profile tailstock part number: 00E2720●Wrap plug FRU numbers:●o12R9314 (SFP+ SR wrap plug)o74Y7010 (Twinax wrap plug)o10N7405 (1 Gb unshielded twisted pair (UTP) wrap plug)I/O bus architecture: PCIe2 x8●PCIe2 2-port 10 GbE BaseT RJ45 Adapters (CCIN: 2CC4 FC: EN0W EN0X) specifications:Adapter FRU number: 00E2714 (complies with RoHS requirement)●Regular-height tailstock part number: 00E2862●Low-profile tailstock part number: 00E2721●Wrap plug FRU number: 10N7405 (RJ45 wrap plug)●I/O bus architecture: PCIe2 x8●Cables: PCIe2 4-Port (10Gb+1GBE) SR+RJ45 AdaptersThese adapters (CCIN: 2CC3 FC: EN0S and EN0T) use multimode fiber optic cables with shortwave lasers. Table 2 lists cable details.Table 2. Supported distances for multimode fiber optic cablesCable type OM1*OM2**OM3Specification Multimode 62.5/125 micronfiberMultimode 50/125 micron fiber Multimode 50/125 micron fiber Bandwidth200 MHz x km 500 MHz x km 2000 MHz x kmSupported distances 0.5 meters to 33 meters (1.64feet to 108.26 feet)0.5 meters to 82 meters (1.64feet to 269.02 feet)0.5 meters to 300 meters (1.64feet to 984.25 feet)* Because core sizes differ, OM1 cables can be connected only to other OM1 cables.** For best results, OM2 cables must not be connected to OM3 or OM4 cables. However, if an OM2 cable is connected to an OM3 or OM4 cable, the OM2 cable characteristics apply to the entire length of the cables.Cables: PCIe2 4-Port (10Gb+1GBE) Copper SFP+RJ45 AdaptersThese adapters (CCIN: 2CC3 FC: EN0U and EN0V) use 10 Gb copper twinax Ethernet cables listed in Table 3.Table 3. Feature code and part number for varying lengths of the cableCharacteristics Cable, by lengthLength 1 m (3.28 ft) 3 m (9.84 ft) 5 m (16.4 ft)Feature code EN01EN02EN03CCIN EF01EF02EF03Part number46K618246K618346K6184Cables: PCIe2 2-Port 10 GbE GBaseT AdaptersThese adapters (CCIN: 2CC4 FC:EN0W and EN0X) use the (4-pair) CAT 6A cables.Features and specificationsThe adapters provide the following features:Are PCIe2 NIC network convergence adapters.●Can be used as the host local area network (LAN) adapter.●Support interrupt moderation to deliver increased performance while significantly reducing processor ●utilizationSupport dual port operation in any PCIe3 or PCIe2 slot.●Support auto-negotiation, full-duplex only.●Support multiple media-access control (MAC) per interface.●Support integrated media-access control (MAC) and physical layer (PHY).●Provide message signal interrupts (MSI), MSI-X, and support of legacy pin interrupts.●Support jumbo frames up to 9.6 KB.●Support gigabit Ether Channel (GEC) with the existing software.●Support TCP checksum offload transmission control protocol (TCP), user datagram protocol (UDP), ●TCP segmentation Offload (TSO) for IPv4 and IPv6.Support TCP segmentation or large send offload●Support EEPROM-SPI and single EEPROM●Comply with the following protocols:●oIEEE 802.3ae in the 10 GbE portsoIEEE 802.3ab in the 1 GbE portsoEther II and IEEE 802.3 for encapsulated framesoIEEE 802.1p for setting up priority levels in tagged VLAN framesoIEEE 802.1Q for VLAN taggingoIEEE 802.3x for flow controloIEEE 802.3ad for load-balancing and failoveroIEEE 802.3ad and 802.3 for link aggregationSupported serversTable 4 identifies the IBM Power System servers that are supported by these adapters.Table 4. Servers supported by the adaptersSupported operating systems and device driversThe adapters support the following IBM AIX®, Linux, and IBM i operating systems and device drivers: AIX (all adapter feature codes support these AIX versions):AIX 7.1, Technology Level 3, Service Pack 2, or later●AIX 7.1, Technology Level 2, Service Pack 2, or later●AIX 7.1, Technology Level 1, Service Pack 3, or later●AIX 6.1, Technology Level 9, Service Pack 2, or later●AIX 6.1, Technology Level 8, Service Pack 3, or later●AIX 6.1, Technology Level 7, Service Pack 2, or later●Linux (all adapters feature codes support these versions of Linux):Red Hat Enterprise Linux Version 6.5 or later; current maintenance updates are available from Red ●Hat.SUSE Linux Enterprise Server 11, Service Pack 3, or later; current maintenance updates are●available from SUSE.For support and important notices, see the Linux on IBM web page:/webapp/set2/sas/f/lopdiags/info/LinuxAlerts.htmlIBM i (Table 5 lists IBM I versions that are applicable to the adapter feature codes).Table 5. IBM i version applicable to adapter feature codesDevice driversTable 6 lists the device drivers that are needed for the adapters.Table 6. Device driversTo download the current version of the device driver or Power RAID adapter utilities (iprutils), go to the IBM Service and productivity tools website:/webapp/set2/sas/f/lopdiags/home.htmlPopular configurationFigure 3 shows a common configuration using these adapters with two IBM Power Systems® that are connected via an Ethernet network.Figure 3. Power Systems using EthernetWarrantyWhen these adapters are installed in a supported IBM server, they assume your system's base warranty.Physical specificationTable 7 lists the physical specifications for these adapters.Table 7. Physical specificationsPart numbers (CCINs)Dimension00E2719 (2CC3)00E2718 (2CC4) Width0.7"0.7"Length 6.6" 6.6"Height 2.731" 2.731"Height with bracket 4.725" 4.725"Weight450 g (0.99 lb.)450 g (0.99 lb.) Operating environmentThe adapters are supported in the following environment:Temperature:●oOperating: 0° to 55°C (32° to 131 °F) at 0 - 914 m (0 - 3000 ft) oStorage: -40° to 65°C (-40° to 149°F) at 0 - 914 m (0 - 3000 ft) Relative humidity: 5% - 95% (non-condensing)●Agency approvalsThe adapters are compliant with European Union Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.Table 8 lists FCC Classifications that are available for these adapters. Date format is mm/dd/yy.Table 8: FCC ClassificationsPart numbers (CCINs)00E2719 (2CC3)00E2718 (2CC4) Classification Class Date Class Date FCC Rules, Part 15 B01/13/13A08/09/13 Industry Canada, ICES-003 B01/13/13A08/09/13 EN55022 (emissions portion of the CE Mark)B03/11/13A08/19/13 EN55024 (immunity portion of the CE Mark)N/A03/11/13N/A08/19/13 CISPR22--Australia/New Zealand (C-Tick Mark)B01/13/13A08/19/13 Japan VCCI B01/25/13A08/19/13 Taiwan BSMI B01/30/13A10/18/13 Korea B02/20/13A09/10/13Related informationSee these resources for more information about the adapters:IBM Power Systems S812L and S822L Technical Overview and Introduction, REDP-5098●/abstracts/redp5098.html?OpenIBM Power Systems S814 and S824 Technical Overview and Introduction, REDP-5097●/abstracts/redp5097.html?OpenIBM Power System S824L Technical Overview and Introduction, REDP-5139●/redpieces/abstracts/redp5139.html?OpenIBM Power Systems E870 and E880 Technical Overview and Introductio n, REDP-5137●/redpieces/abstracts/redp5137.html?OpenIBM Power System S822 Technical Overview and Introduction, REDP-5102●/abstracts/redp5102.html?OpenIBM Systems●/systems/infrastructure/us/en/it-infrastructure/mobile-app.htmlPower Systems Technical Guide●/systems/power/hardware/reports/factsfeatures.htmlIBM PartnerWorld® - Techline●/partnerworld/wps/servlet/ContentHandler/LLIE-6LLS4TIBM PartnerWorld - IBM Techline Repository●https:///partnerworld/wps/servlet/ContentHandler/stg_com_sys-techline-repositoryNoticesThis information was developed for products and services offered in the U.S.A.IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:IBM Director of Licensing, IBM Corporation, North Castle Drive, Armonk, NY 10504-1785 U.S.A.The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurement may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.COPYRIGHT LICENSE:This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs.© Copyright International Business Machines Corporation 2014-2015. All rights reserved.Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted byGSA ADP Schedule Contract with IBM Corp.This document was created or updated on January 20, 2015.Send us your comments in one of the following ways:Use the online Contact us review form found at:●/redbooksSend your comments in an e-mail to:●***************.comMail your comments to:●IBM Corporation, International Technical Support OrganizationDept. HYTD Mail Station P0992455 South RoadPoughkeepsie, NY 12601-5400 U.S.A.This document is available online at /redbooks/abstracts/tips1225.html . TrademarksIBM, the IBM logo, and are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. These and other IBM trademarked terms are marked on their first occurrence in this information with the appropriate symbol (® or ™), indicating US registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at /legal/copytrade.shtmlThe following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both:AIX®IBM®PartnerWorld®Power Systems™Redbooks®Redbooks (logo)®The following terms are trademarks of other companies:Linux is a trademark of Linus Torvalds in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
OptiXOSN设备简介学习
波长(nm) 1310
标称传输 距离(Km) 0～2
2～20
1310 1550 1550
1310
1310 1550 1550 1310 1310 1310 1550 1550 1550 1550 1550 1550 1550 1310 1550 1550 1550 1550 1550 1550 1310 850
第10页/共17页
第十页，编辑于星期六：十一点 十四分。
OSN3500 对偶板位
条件
40G交叉容量
80G或200G交叉容 量
对偶槽位
（3，16）（4，15）（5，14）（6，13）（7，12）（8，11）
（2，17）（3，16）（4，15）（5，14）（6，13）（7，12）（8， 11）
只有互为对偶板、光口号相同的两个光口之间才能组复用段环。但若组共享复用段环的两个单板中有一
OSN3500配置 II
OSN3500配置 Ⅲ
GXCS
EXCS
UXCS
SXCS
40G（256×256 VC-4）80G（512×512 VC-4）80G（512×512 VC- 200G（1280×1280VC-4） 4）
5G(2016×2016 VC-12) 5G(2016×2016 VC- 20G(128×128 VC-4) 20G(128×128 VC-4) 12)
发光功率(dBm) 最小 最大
接收灵敏 最小过载光 度(dBm) 功率(dBm)
通道允许 最大色散
热插拔
在线光功 率监测
备注
-23
-8
-15
-8
-28
-8
-5
0
-5
0
-34
Mellanox MMA2P00-AS MMA2P00-ASHT 25GbE SFP28 光纤传输器
Mellanox® MMA2P00-AS/MMA2P00-ASHT is a pluggable SFP28 optical transceiver designed foruse in 25GbE Ethernet. It incorporates Mellanox integrated circuit technology in order to provide highperformance at low power. The transceiver operates over a pair of multi-mode fibers (MMF), using anominal wavelength of 850nm, and is SFF-8402 compliant.MMA2P00-AS/MMA2P00-ASHT has a standard SFP28 connector on the electrical side towards the hostsystem supporting IEEE 802.3bm. The optical interface is composed of two optical channels/fibers, onein each direction, intended for a multi-mode optical cable connected via standard LC connectors. Eachchannel/fiber operates at signaling rates up to 25.78125GBd.The transceiver offers selectable retiming for both its optical transmitter and receiver for the 25Gb/s rate,and it also supports lower bit rates without. The transmitter has programmable input equalizers and inputsquelch function, while the receiver has programmable output amplitude and pre-emphasis.Rigorous production testing ensures the best out-of-the-box installation experience, performance, anddurability.T able 1 - Absolute Maximum RatingsT able 2 - Operational Module InformationNotes: 1. Internal temperature readout through DDMI of up to 75°C is allowed. 2. Internal temperature readout through DDMI of up to 90°C is allowed.MMA2P00-AS | MMA2P00-ASHT25GbE SR SFP28 MMF Optical Transceiver†PRODUCT BRIEFINTERCONNECT©2019 Mellanox Technologies. All rights reserved.†For illustration only. Actual products may vary.350 Oakmead Parkway, Suite 100, Sunnyvale, CA 94085Tel: 408-970-3400 • Fax: © Copyright 2019. Mellanox Technologies. All rights reserved.Mellanox and Mellanox logo are registered trademarks of Mellanox Technologies, Ltd.LinkX is a trademark of Mellanox Technologies, Ltd. All other trademarks are property of their respective owners.Mellanox 25GbE SR SFP28 MMF T ransceiverpage 2Warranty InformationMellanox LinkX optical transceivers include a 1-year limited hardware warranty, which covers parts repair or replacement.Mechanical Schematics53911PB Rev 1.22Table 3 - Part Number and Description。
Silicon Labs 技术讲解 - EFM32 Gecko 无线连接开发板操作指南说明书
Tech Talks LIVE Schedule –Presentation will begin shortlyRecording and slides will be posted to:/training4:003:593:583:573:563:553:543:533:523:513:503:493:483:473:463:453:443:433:423:413:403:393:383:373:363:353:343:333:323:313:303:293:283:273:263:253:243:233:223:213:203:193:183:173:163:153:143:133:123:113:103:093:083:073:063:053:043:033:023:012:592:582:572:562:552:542:532:522:512:502:492:482:472:462:452:442:432:422:412:402:392:382:372:362:352:342:332:322:312:302:292:282:272:262:252:242:232:222:212:202:192:182:172:162:152:142:132:122:112:102:092:082:072:062:052:042:032:022:012:00We will begin in:1:591:581:571:561:551:541:531:521:511:501:491:481:471:461:451:441:431:421:411:401:391:381:371:361:351:341:331:321:311:301:291:281:271:261:251:241:231:221:211:201:191:181:171:161:151:141:131:121:111:101:091:081:071:061:051:041:031:021:011:000:590:580:570:560:550:540:530:520:510:500:490:480:470:460:450:440:430:420:410:400:390:380:370:360:350:340:330:320:310:300:290:280:270:260:250:240:230:220:210:200:190:180:170:160:150:140:130:120:110:100:090:080:070:060:050:040:030:020:013:00Wireless Connectivity Tech TalksWednesday, April 7th Unboxing the BGM220 Explorer Kit Wednesday, May 26thOptimize Your Battery Power with BG22Speaker水谷章成（Aki Mizutani）Sr. FAE, JapanWELCOME Unboxing the BG220 Explorer Kit Aki MizutaniAgenda▪Introduce BGM220 Explorer Kit (BGM220-EK4314A)▪Rapid Prototyping Eco Systems▪Demonstration▪BGM220 EK Documentation and Tools▪Demo 1) iBeacon▪Demo 2) Heartrate & SpO2 sensor▪Q & ABGM220 Explorer Kit –Features OverviewFeatures▪BGM220P module▪ARM Cortex M33 –76.8MHz, 512kB Flash, 32kB RAM ▪Bluetooth 5.2, 1.4uA EM2 with Full RAM Retention▪On-board debugger▪USB for power and communication▪J-Link, VCOM (with hardware flow control), PTI ▪Seamless DX experience in SS▪Simple user I/O for basic peripheral usage▪Reset button, 1 user button, 1 user LED▪Standard HW expansion connectors▪Rapid prototyping with off-the-shelf boards▪mikroBus and qwiic (compatible with Groove and Stemma QT)▪Breakout pads for additional hardware customization▪Aligned with breadboard dimensions▪Kit contains USB cableSimplified features but endless possibilitiesMicro USB ConnectorQwiic connectorMikroBus connectorUser I/Os (button, LED)BGM220PBreakout PadsOn-board debuggerIoT Rapid PrototypingFocusing on simple periperal expansions▪3rd party ecosystems (shields, hats, click-boards) allowsdevelopment based on off-the-shelf expansion hardware▪Widely used for quick prototyping, especially withinhobbyist and maker communities▪MikroE (mikroBUS), Seed Studios (Grove), SparkFun(Qwiic) and adafruit(STEMMA/STEMMA QT) offer a widevariety of small and modular options for IoT end nodes,which typically revolve around sensors, UI and actuators▪Grove, qwiic and STEMMA QT are pin compatible▪One connector can support multiple ecosystems▪Only requires adapter cable or board▪MikroE alone offers▪250sensor boards▪40display and LED boards▪...all with 3.3V input voltage supportRapid Prototyping System ComparisonsController/Device mikroBUS ClickMIKROE STEMMAadafruitSTEMMA QTadafruitGroveSeeedQwiicSparkFunGravityDFRobotConnection ProprietarymikroBUS Socket(16 Pin)JST PH 3 or 4 Pin(2.0mm pitch)JST SH 4 Pin(1.0mm pitch)Proprietary 4 Pin(2.0mm pitch)JST SH 4 Pin(1.0mm pitch)JST PH 3 or 4 Pin(2.0mm pitch)Power Supply Rails3-5V DC3-5V DC3-5V DC3-5VDC3V DC3-5V DC GPIO Voltage3-5V DC3-5V DC3-5V DC3-5V DC3V DC3-5V DCSupported Interfaces I2C/SPI/UART/Analog/Digital/PWM I2C only on 4 pin.Analog/Digital/PWM on 3pin.I2C only I2C/Analog/Digital/PWMon 4 pinI2C only I2C or UART on 4 pin.Analog/Digital/PWM on 3pin.Website https:///click-boards https:///introducing-adafruit-stemma-qt/what-is-stemmahttps://learn.adafruit.com/introducing-adafruit-stemma-qt/what-is-stemma-qthttps://www.seeedstudi/grove.htmlhttps://www.sparkfun.com/qwiichttps://www.dfrobot.com/topic-282.htmlBGM220 Explorer Kit –Collateral▪User Guide: https:///documents/public/user-guides/ug465-brd4314a.pdf▪Getting Started Guide: https:///bluetooth/latest/general/getting-started#getting-started-with-bgm220-explorer-kit▪Porting Code from mikroSDK and Arduino▪GitHub Repository▪Available Now: Barometer, HRM, and I2C Accelerometer▪Coming in the next 2-3 weeks: OLED Display, 7 Segment Display + Joystick▪Coming in the next 2 Months: Contactless Temperature Sensor, Combo Environment Sensor, and SPI Accelerometer▪Simplicity Studio 5▪Interface▪Fresh, new & simplified▪Intuitive out-of-the-box experience▪Fast access to developer resources▪Linux, Mac & Windows▪Tools▪Configuration utilities▪Compiler▪Error & validation▪IDE & command line support▪Graphical hardware configurator▪Energy Profiler –visual energy analysis▪Network Analyzer –packet capture & decodeEnhanced Development with EFR Connect▪Redesigned and simplified developer app▪Redesigned UI to forefront key BLE device metrics ▪App-delivered tools support BLE code development ▪Improved stability and reliability▪Developer-focused features▪Simultaneous connections for broader visibility▪Log and export BLE activity▪Powerful filtering options to identify devices▪Save custom UUID to better organize a GATT▪Try it today▪Replaces Silicon Labs Blue Gecko mobile app▪Available on iOS and Android▪Source code available on GitHub(Android, iOS)Explorer Kit▪Lowest price point ▪On-board debugger and signal breakouts ▪Minimal on-board features ▪3rdpart hardware support▪New CategoryDev Kit▪Single device development board ▪On-board debugger and signal breakouts ▪On-board sensors ▪Impressive out-of-the-box demos▪Evolution from ThunderboardPro Kit▪Modular development platform ▪Advanced development use cases ▪Energy profiling and external device debug ▪Ethernet for large network test ▪Designed to maximize reuse of EFR32 devices ▪Evolution from WSTKIoT Hardware Development Tools –Feature ComparisonExplorer KitDev Kit Pro KitDebug Speed 1.6MHz1.6MHz8MHz Debug USBFull SpeedFull SpeedHigh SpeedPacket Trace Interface (PTI)2xBreakout PadsPushbutton s & User LEDsVirtual COMCoin cell battery holder−On-board Sensors−Battery Pack Connector −Radio Board Connectors−−EXP Connector−−Display −−Debug OUT−−EFM8/32, EFR32, EZR32Debug Ethernet −−100 Mbit/sEnergy Monitor (AEM) −−3rd Party Hardware addons−−MikroE-Silabs Click Shield▪Works with Silabs Development Boards:▪WSTK –Wireless Starter Kit or Pro Kit▪MCU Development Boards▪Thunderboard or Dev Kit▪https:///silabs-click-shield▪Part Number: MIKROE-4464Demonstration▪Walk through , Github and Simplicity Studio 5▪Demo 1) iBeacon▪Demo 2) Heartrate & SpO2 sensorDemonstration▪Walk through , Github and Simplicity Studio 5▪Demo 1) iBeacon▪Demo 2) Heartrate & SpO2 sensorQ&AFacebook Twitter CommunityTHANK YOU Recording and slides will be posted to: /training。
Matrox Meteor-II Pulnix TM-4000CL摄像头接口应用说明书
signal to camera to initiate and control exposure time. Matrox Meteor-II/Camera Link receiving LDV, FDV, CLK and video signal
from camera. x2048Pcon.DCF
Camera control settings: AccuPiXEL Dual-Tap camera control software version 2.0 or higher can be used.
Control
Setting
Shutter Mode ASYNC (external pulse width)
parentheses as per camera manufacturer)
Basics about the interface modes
Camera Descriptions
Effective resolution: 2048 × 2048 × 8-bit @ 15 fps. Camera Link BASE interface (Dual tap). Progressive scan. Internal sync. Internal or external exposure control. 40 MHz pixel clock rate.
漫步者原子豆编解码
漫步者原子豆编解码【最新版】目录1.漫步者原子豆编解码器介绍2.编解码器的原理与特点3.应用范围与实际效果4.总结正文漫步者原子豆编解码器是一款性能出色的音频处理设备，适用于音乐制作、影视后期制作等领域。
它能够实现音频信号的高质量编解码，提供高品质的音频体验。
编解码器的原理是通过对音频信号进行数字信号处理，将模拟音频信号转换成数字信号，以便于存储和传输。
在播放时，再将数字信号转换回模拟信号。
这种处理方式能够有效地降低音频信号在传输过程中的损耗，保证音频质量。
漫步者原子豆编解码器采用了先进的数字信号处理技术，确保了音频信号的高保真度。
漫步者原子豆编解码器具有如下特点：1.高采样率：编解码器支持高达 32 位的采样率，使得音频信号的细节表现更加丰富，提高了音频质量。
2.高比特深度：比特深度是指音频信号的数字量化精度，漫步者原子豆编解码器支持高达 24 位的比特深度，使得音频信号的表现更加细腻，降低了数字失真。
3.多种格式支持：编解码器支持多种音频格式，包括 MP3、WAV、FLAC 等，满足用户不同的需求。
4.便捷的操作：漫步者原子豆编解码器采用一体化的设计，用户只需连接音频设备即可使用，无需复杂的设置。
漫步者原子豆编解码器在音乐制作、影视后期制作等领域有广泛的应用。
在音乐制作中，编解码器能够提供高品质的音频信号，使得音乐作品的表现更加细腻丰富。
在影视后期制作中，编解码器能够确保音频信号的高质量，提升观众的观影体验。
总的来说，漫步者原子豆编解码器是一款性能出色的音频处理设备，能够实现音频信号的高质量编解码，提供高品质的音频体验。
活力科技 Speed Dome 2MP 视频分析摄像头说明
Approvals
• Integration Unified Solution ISV Integration Firmware Access Browser Auto Firmware Upgrade GPS Position
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Sony VISCA, Pelco D, Pelco P 1, Ethernet (10/100Base-T), RJ-45 connector IP address filtering; HTTPS encryption; Password protected user level; Anonymous login; IEEE 802.1X network access control
4, cable without connector 2, cable without connector MicroSDHC, MicroSDXC memory card slot (card not included)
High PoE (IEEE802.3at) / 29.4W; AC 24V / 68W 2605 g (5.74 lb) 200 x 276 mm (7.9'' x 10.9'') High PoE injector (for USA) or Power Adapter (for other countries) Weatherproof (IP67); Bundled dome cover (IK09); Optional dome cover (IK10) Pendant, Wall, Corner, Pole, Parapet -52°C ~ 60°C (-61.6°F ~ 140°F) within 30 minutes at AC 24V, -40°C ~ 60°C (-40°F ~ 140°F) within 30 minutes at High PoE -52°C ~ 60°C (-61.6°F ~ 140°F) for AC 24V, -40°C ~ 60°C (-40°F ~ 140°F) for High PoE 10% ~ 85% RH CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), IP67, IK09 (IK10 option), NEMA 4X, UL (for bundled PoE injector or power adapter)
ELMO VP Receiver VPR-2 用户手册说明书
NOTICE:- Do not use this product outside your Country.- Depending on the specification of the HDMI device, this product may not work properly or there may be some effect on performance.- Compatibilities with supporting models have been confirmed in our environment. - We do not guarantee operation in all environments.- Depending on the devices to be used with this product, CEC function may not be used.- Because the wireless connection takes a time in low temperature environments, please use after switching it on and waiting for a while.- If you use the wireless system close to more than 5 pairs, it takes a little long time to connect by wireless at interference when power is on.- The product design and the specification are subject to change without prior notice. -and are trademark of ELMO Co., Ltd.- All other company/products names described in this manual are trademarks or registered trademarks of respective companies.Contact your dealer if any of the following items are not included in the package. Caution・The Supplied AC attachment is for your country.・When using the product, connect the AC attachment to the AC adapter.Assembling/ disassembling procedure for the AC adapterAssemble or disassemble the AC adapter and the AC attachment by taking the following procedure.Make sure to unplug the cable from the mains power before starting the assembling/ disassembling work..■ AssemblingSlide the AC attachment along the groove of the AC adapter until you hear a “click”.■ DisassemblingPress the centre of the AC attachment and slide it along the groove to remove. Caution *1 Use an appropriate AC attachment for your region.Part Names1. Micro USB power port : AC adapter terminal.2. Menu/Select button : To display or select menu.3. Up button : To scroll up menu items.4. Down button : To scroll down menu items.5. HDMI port : HDMI output terminal.6. Link light : LED to indicate the connection status with the visual transmitter.7. Power light : LED to indicate the power supply condition.8. Remote control sensor . Caution･Please remove the protection sheet of the VP receiver before you use.･The micro USB terminal of the VP receiver is for power supply only and other USB devices cannot beconnected. Use the supplied AC adapter to supply power to the VP receiver. Do not use the bus powered USB to supply power to the VP receiver. The power consumption of the VP receiver is higher than the standard of the USB bus power.･Use the visual transmitter that supports WHDI standard. ･HDMI output of this product complies with HDMI standard.･Because the wireless connection takes a time in the low temperature environments, please use after switching it on and waiting for a while.･When installing this unit please ensure there are no obstacles between the remote control and infrared receiver .Remote Control①Power button : Turn the power ON/OFF(Standby mode) ②OK button : Choose the OSD item ③Up button : Move the cursor up ④Down button : Move the cursor down ⑤Left button : Move the cursor left ⑥Right button : Move the cursor right ⑦Cancel button : Go back in the menu ⑧Menu button : Show the menu on screen ⑨Input button : Select registered video source ⑩Info button : Display the current link information⑪Part of the infrared signal transmission: infrared transmission⑫Battery container : install batteries. (TYPE AAA ×２)Caution･On the back of the remote control lift and pull the battery lid in the direction shown. Remove the lid and insert the two AAA batteries.･If this product is not going to be used for a long time, take the batteries out of the remote control. ･Do not use rechargeable batteries (e.g., Ni-Cd (NiCad batteries)). ･Do not use new and old batteries or batteries of different types together. ･Do not try to recharge or short-circuit the batteries.･When disposing of used batteries, follow the instructions of your local government. ･Insert from one side and pay particular attention to the polarity (+/-directions). ･Be sure to use AAA batteries.･If any liquid from a battery leaks onto your skin or clothes flush the area with clean water immediately. If it gets into your eye, flush immediately with clean water and contact a doctor.･The receivable range may be reduced when the main unit is placed in direct sunlight, near an inverter fluorescent light or in any other unfavourable conditions. Depending on the light source conditions, the sensor may fail to receive any infrared light. In such cases, relocate the main unit or shield the light source.CautionChildren may ingest small batteries. Always keep batteries safe and out of reach.If a battery is swallowed, consult a doctor immediately as this could result in asphyxiation or be an obstacle to digestion, etc.Connecting the VP ReceiverCaution *1 The AC adapter is different according to the destination. *2 Change the input mode of the image output device to HDMI. *3 Use a commercially available HDMI cable (Type A).Turning the power ON/OFFPress the power button on the remote control to turn the power on. To turn the power off, press the power button on the remote control once (standby mode).Configuring the wireless settingsConfigure the wireless settings before using the VP receiver.Before setting the wireless communication, please connect the VP receiver and standard HDMI display ,then turn on the VP receiver and the document camera (MO-1w) manufactured by ELMO.To display the menu screen, push the Menu/Select button on the main unit or the menu button on the remote control, then select "Setup" and push the Menu/Select button on the main unit or the OK button on the remote control. You can add/remove or modify the name of the visual transmitter from the menu.●Add ELMO's document camera (MO-1w) (pairing) 1. Set VP receiver in the add (pairing) mode.Move the cursor to "Setup" with the Up or Down buttons and push the Menu/Select button on the main unit or the OK button on the remote control.Move the cursor to "Add new Video Source" and push the Menu/Selectbutton on the main unit or the OK button on the remote control to enter receive mode.2. Press and hold the pairing button (Located on the side of the MO-1w) on the document camera until appearing "Adding ○ ○ ○(the name of the video transmitter)" appears on the screen.※ About 5 seconds. It may vary depending on the situation.CautionPlease read this instruction manual carefully before using this product and keep it for future reference.INSTRUCTION MANUALInstruction ManualVP Receiver3 4 5 6 7■Link light (Blue) ・Lit : Already matchingwith the visual transmitter.・Blink : Searching for WHDI input signal■Power light (White) ・Lit : Power is ON. ・Off : Power is OFF. ・Blink : Standby modeAC adapter with attachments AAA batteries (for Remote control)Important Safeguards ⑪Remove the lid, and insert two AAA batteries in the directions shown in the figure. 83. Move the cursor to "OK" on the screen and push the Menu/Select button on the main unit or the OK button on the remote control.Pairing will start. The image of the documemt camera displays automatically when pairing finishes.If the pairing stops please turn the power of VP receiver power off and the document camera, and restart pairing.4. If you wish to register more than 1 document camera, repeat form step 1. (Up to eight document cameras can be paired). Caution ・For details about the operation of the Visual transmitter, refer to the instruction manual of the respective Visual transmitter.■Remove the visual transmitter1. Select “Setup”. Then press the Menu/Select button on the main unit or the OK button on the remote control.2. Select “Remove Video Source” from the menu. Then press the Menu/Select button of the main unit or the OK button of the remote control.3. Select the name of Visual transmitter to remove. Then press the Menu/Select button of the main unit or the OK button of the remote control.4. Select “OK” and press the Menu/Select button or the OK button of the remote control.5. The confirmation of "Removing ○ ○ ○(Name of the transmitter) " appears, then select OK and press the Menu/Select button on the main unit or the OK button on remote control.■Modify the name of the visual transmitter1. Select “Setup”. Then press the Menu/Select button.2. Select “Modify Video Source Name” from the menu. Then press the Menu/Select button on the main unit or the OK button on the remote control.3. Select the registered visual transmitter. Then press the Menu/Select button on the main unit or the OK button on the remote control.4. (Using the main unit) Use the Up or Down buttons to move the cursor left and right to the character you want to change. Press the Menu/Select button and cursor will change colour to confirm selection. Now usethe up and down buttons to move to the new character you want to replace the old one with and press the Menu/Select button to confirm.(Using the remote control) This is the same procedure as the main unit, but use the remote control left or right button to move the cursor, the up or down buttons to change the character and press the OK button to confirm.5. Once completed press and hold the Menu/Select button on the main unit or press the OK button on the remote control. Then select “Save” and press the Menu/Select button on the main unit or the OK button on the remote control.Selecting the Video SourceDisplay the menu by pressing the Menu/Select button.A list of registered visual transmitters appears in the menu. Select the desired visual transmitter. Press the Menu/Select button to output the image of the selected visual Transmitter.In addition, by pressing the Input button on the remote control you can output video by selecting the video transmitter registration.When the message of “Please remove and register this ○○○ again” is shown while linking with the transmitter, please remove and add the transmitter again.Info MenuPush the Info button on the remote control, to display the current link status. The registered name of the video transmitter and signal strength of the video is displayed on the transmitter.How to wall mount this unitIf you install on a wall as shown below, please install with standard screws (not supplied).If trouble occurs or you have any queries, first check this section.If the problem persists, check your warranty and contact the dealer where you purchased the product.The AC adapter is disconnected. Check the connection between the AC adapter and the wall outlet.Is the visual transmitter registered? Add the visual transmitter.Equipment which uses the same frequency may cause radio interference. Check the surrounding radio frequency environment.The VP Receiver does not work.The AC adapter is disconnected from the VP Receiver.Check the connection between the AC adapter and the VP Receiver. HDMI cable is not connected properly.Firmly insert HDMI cable into the connector. The cable is damaged.Do not use a damaged cable. (Replace the cable)The input signal is out of the display range of the visual transmitter. Check the resolution.No image is displayed. orThe image is distorted.Equipment which uses the same frequency may cause radio interference.Check the surrounding radio frequency environment.HDMI cable is not connected properly.Firmly insert HDMI cable into the connector. The cable is damaged.Do not use a damaged cable.No audio from the visual transmitter is input. No sound is output when there is no audio input.No sound is output.The volume of the visual transmitter or the image output device is set to minimum. Turn up the volume.Caution･When error messages appear, follow the instructions to fix the error. ・If the problem persists, the product may be defective. Contact the dealer where you purchased the product for repair.PRODUCT SPECIFICATIONSOperating Temperature 0℃ - 40℃ (32°F – 104°F) Wireless Band Used 5190MHz - 5670MHz Communication DistanceApprox. 10m (32.8feet)(differs depending on the usage conditions) Power Supply AC adapterInput: 100V-240V, 50/60Hz(0.3A)Output: 5V, 2AStandards HDMI / WHDI standard compliance, including HDCP Transmitter registration 8 setsImage output:VGA (640x480)60Hz/75Hz, SVGA (800x600)60Hz/75Hz, XGA (1024x768) 60Hz/75Hz, WXGA (1280x768) 60Hz, WXGA (1280x800) 60Hz, SXGA (1280x1024) 60Hz/75Hz1152x864 (60Hz), 1280x960(60Hz) 480p, 576p, 720p, 1080i, 1080p HDMI OUT (Type A)Audio output: 192 kHz x 24 bitPower Consumption (Current) 7W( 5V / 1.4A) without AC adapterExternal DimensionsL83 x W80 x H31 (mm)L3 1/4” x W3 1/8” x H1 1/4”Weight 110g (0.24lb)6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, JapanELMO Europe SASHeadquartersImmeuble Elysées La Défense, 7C Place du Dôme, 92056 Paris La Défense, FRANCETel: +33 (0) 1 73 02 67 06 Fax: +33 (0) 1 73 02 67 10E-mail: *********************: /German BranchHansaallee 201, Haus 140549 Düsseldorf, GermanyTel: +49 (0)211 544756 40 Fax: +49 (0)211 544756 60E-mail: ******************** Web: http://www.elmo-germany.de/VPR-2(E2)_M R0-XexCAMERA 1CAMERA 2Pairing ButtonThe side panel of the MO-1wSelection order of the transmitterVP ReceiverPushSignal strengthName of the video transmitter Wall Mount screws are not included. Please use the screws as shown below. The screw head should be about 5mm from wall.When mounted to wall, the remote control operation range is 30 ° left and right , 30 ° to the front wall as shown in the figure.Please attach the screws to the wall. When attached to the wall of the hollow wall material such as gypsum board, please use the plug anchor corresponding to each of the wall material.The distance between screw and screw is 50mm.Then hook the screw hole on the unit.。
知搏Magento2移动应用构建器用户手册说明书
Mobile App BuilderUser Manual v1.0.4Contents:1.0Introduction (3)1.1Features List (4)1.2Technology for Development (4)1.3Installation Guide (4)2.0Admin Panel (5)2.1General Settings.........................................................................................5-62.2Payment Methods (7)2.3Push notification Settings (8)2.4Push Notification History (9)2.5MenuSettings (10)2.6Home Page Layout...............................................................................11-163.0Mobile App Screens (17)3.1Home Screen (17)3.2Navigation Menu (19)3.3Category Screen (20)3.4Product Screen (21)3.5Wishlist Screen (22)3.6Login Screen (23)3.7Shopping Cart Screen (24)3.8Checkout Screen (25)3.9Payment Screen (26)3.10My Account Screen (27)3.11Order Details Screen (28)1.0IntroductionWe all are aware that eCommerce mobile apps are one of the most unavoidable need for every online store.So,for all the Magento2 store owners out there who are looking for mobile shopping apps, KnowBand Mobile App Builder is the perfect tool.The Mobile App Builder extension for Magento2is a readymade& automated framework to create and publish mobile apps.All is required from the admin is to get the extension and share business requirements.Entire technical stack work from development to release on App stores will be handled.Prime highlights of the extension are mentioned below:●No coding required to launch fully native Android and iOS mobileapps.●Friendly admin panel with high-end customization control ondesigning as well as working.●Apps with almost all regular Magento functionalities withnumerous other features.●Just one time payment with3months of Free support.No hiddencharges or subscription.●Apps branded to your business only with relevant graphics andcontent.●No extra charges for app publish on Google Play Store&AppleApp Store.The store admin just need to create their own developer account and share the details.●Most effective tool to surpass surrounding competition and boostsales for your business.1.1Feature List:Customizable Home Screen Store Branded Apps Zopim&WhatsApp Chat Tablet&Mobile Support Multiple Colors&Fonts Google&Facebook Login Automatic Inventory Update Multi-lingual&RTL OTP&Fingerprint LoginAll Product Type Support Multi-currency Support All Payment Method Support Unlimited Push Notifications Wish list Functionality All Shipping Method Support Coupon/Voucher Support Multiple Filters&Sorts Simplified Checkout Screen Seamless Accordion Menu Product Social Sharing Real-time Order Tracking1.1Technology For Development:Language:PHPFrame Work:Magento1.2Installation Guide#1.Buy the extension and download the extension package of MobileApp Builder.#2.Install zipped package on your Magento2web-store.#3.Extension is now installed and ready for use.Check“Knowband Extensions>Mobile App Builder”in admin panel.2.0Admin PanelAfter installing Mobile App Builder module into your Magento2store, the plug-in will provide various interfaces in the Admin panel.Each interface is in form of a tab and each tab contains some specific settings/functionality that can be changed as per the need.Below is the explanation for each tab:2.1General Settingsa)Enable the Extension:Enable Mobile App Builder to make the mobile apps work on the user’s devices.b)Redirect to Cart Page when Add To Cart:Whenever any user clicks on Add To Cart button,it will be redirected straight to shopping cart screen.c)Display Short Description:Enable to display the short product description on the apps.d)Enable Request Log Reporting:Enable the error log on the mobile apps which can be used to identify&rectify any abnormal behavior of the mobile apps.e)Enable/Disable Fingerprint Login:Enable Fingerprint login on the Mobile Apps.f)Enable/Disable Phone Number Login:Enable Phone Number login on the Mobile Apps.g)Select Layout for Home Page:Choose the desired Home Screen layout for the mobile apps.h)Enable Live Chat Support:Enable/disable Zopim(Zendesk)chat option on mobile apps.You need to enter the chat API key provided along with the final apps.i)Enable WhatsApp Chat Support:Enable/disable WhatsApp chat option on mobile apps.j)Enable Logo:The store admin can upload the logo which will be displayed on the header of the apps.k)App Button Color:Choose button color for your apps.l)App Theme Color:Choose theme color for your apps.m)App Button Text Color:Choose button-text color for your apps. n)App Background Color:Choose background color for your apps.2.2Payment Method Settings:Mobile App Builder for Android&iOS support all types of payment methods active on the website.Additionally,two native payment options PayPal and COD are available by default in the apps.Edit Payment Methods:The store admin can configure both PayPal and COD payment methods just using the edit option.a)Status:You can enable/disable the payment method just by toggling the button in the background.b)Name:Enter the name of the payment method.c)Payment Mode:You can select the native payment environment from sandbox or live option.These settings allows the users to test the payment methods before proceeding.d)Client ID:Enter the appropriate client ID of PayPal merchant account.It identifies the account to which the Payment has to be made while placing the order.2.3Push Notification Settings:The Mobile App Builder provides unlimited push notifications for handy marketing of the products.These push notifications can be fully personalized and timed from the admin panel.a)Firebase Server Key:To configure the push notification service for the application,you will require a Google firebase server key.This key allows you to send push notification in apps.It will be provided along with the apps.b)New Order Settings:Enable/disable push notification for the new orders placed by app users.Enter the title and message for follow up Push Notification on successful order on the application. c)Order Status Change Settings:Enable/disable push notification which will be sent whenever there is any update in the order delivery status.Enter title and message for follow-up Push Notification for update in order status.d)Abandoned Cart Settings:Enable/disable push notifications for the shopping cart that has been abandoned by the user without successful purchase.Enter the title and message for follow-up push notification for cart abandoned by online shoppers.Time Interval:The time interval(in hours)for sending the Push Notification for the Abandoned Cart to the users who left items in their cart.2.4Push Notification History:Push notification history contains list of all notifications sent on the apps along with complete details.The store admin get to view the complete list.Send Notification:On clicking send notification option,a pop up window appears with option to configure the push notification.a)Title:The title of the Push Notification which is to be sent to app users.b)Message:Message being displayed on the notification.c)Select Broadcast Device Type:The store admin can choose if the notification is to be sent to Android app users or iOS app users or both.d)Select Image Type:Upload relevant image for the personalized push notification.e)Select Redirect Activity:Choose a category or specific product where you want the users to be redirected after tapping on the Push Notification.2.5Menu Settings:In this menu settings tab,the store admin can set and manage the various CMS pages of the application.2.6Home Page Layout:The Mobile App Builder extension offers a customizable Home Screen with all sorts of design elements in the module backend.You can create any layout for app Home Screen&offer an interactive and sale based interface to browse.After adding the layout,click on edit option&start configuring various designing attributes for app home screen.The store admin can configure the following designing elements under the Home Page Layout tab.Top Categories:The top categories can be used to highlight all the major brands/highlights of your store on the Home Screen.These categories can be configured from module backend as shown in the below snapshot:Square Banner:The Banner can be displayed in the square form on the app home screen.The landing page,image can be configured as shown in the below snapshot:Sliding Banner:The sliding banners can be displayed on the app Home Screen whose configuration can be done as shown in the below snapshot:Grid Banner:These banners will be displayed in the form of grid listing&can be customized as shown in the below snapshot:Countdown Timer BannerDisplay a countdown timer banner on Mobile App home screens& offer a time-based/flash sale to your users:Square Products:The products can also be listed in the square view on the App Home Screen.This element can be configured as shown in the snapshot below:Sliding Products:The products can be displayed in the slider view on the mobile app Home Screen&can be configured from backend panel.Grid Products:The products can be displayed in the grid view on the App Home Screen:Products Recently Accessed:The Mobile App Builder offers the recent products tab on the app home screen displaying recently viewed products by the user.Just add element in the layout make it work on the home screen.3.0Mobile App Screens3.1Home ScreenThe Mobile App Builder brings the complete flexibility to design the mobile app home Screen on your own.The Android&iOS mobile apps can be designed from the backend panel using the following designing attributes:-->Top Categories-->Square Banners-->Sliding Banners-->Grid Banners-->Square Products-->Sliding Products-->Grid Products-->Countdown Timer Banner-->Recently Viewed ProductsThe positioning of all the elements can be changed with a simple drag &drop.a)Dynamic Layouts:Create&save various alluring&intuitive layouts in the backend&change your app look&feel in just one click.b)Store Logo:Add your store logo image in the module backend& display the same on the header of the apps.c)Search:The apps have keyword&voice search options which allow the users to search for products without any hassle.d)Wish list:This option in mobile app let you bookmark the desired products for future purchase.e)Shopping Cart:The users can easily access the shopping cart from the top-right corner of the home screen.f)WhatsApp/Zopim Chat:This extension offers two live chat options in mobile apps with Zopim&WhatsApp.The app users can directly message you regarding any issue or query regarding purchase.3.2Navigation Menu:The Mobile AppBuilder offers anaccordion menuin the mobileapps whichdisplays thestore categorieson the MobileApps.Your appusers can easilybrowse all thecategories fromthis menu&access all CMSpages.-->My Account-->Categories-->CMS Pages-->MenuLanguage(s)Currency(s)3.3Category Screen:All categorieson your websiteare fetched onthe Mobile Appsas well.Thecategory screenof apps has twoviews:Grid&List view.Thisscreen has thefollowingoptions:-->Grid&ListView-->Sorting-->ProductFilter3.4Product Screen:The mobile app product screen is completelyclutter-free&appealing. Every product hasmultiple imagesdisplayed along with their name&price.Theproduct availability is also displayed as“In Stock”or “Out Of Stock”along withthe price discounts.The Product Screen has the following options:-->Product Options-->Short Description-->Product Info&Care-->Add To Wishlist-->Add To Cart-->Product SocialSharing3.5Wish-list Screen:The Mobile AppBuilder offers awish-list bagallowing usersto bookmarkproducts forfuturepurchase.Theapp users canview the list ofall wish listproducts here.It has thefollowingoptions:-->Add ToCart-->RemoveFrom Wish list3.6Login Screen:This extensionoffers variousone-tap loginwith thefollowingoptions:-->E-maillogin-->Google&Facebooklogin-->Phone no&fingerprintlogin3.7Shopping Cart Screen:Shopping Cartscreen of mobile appwill display all addedproducts into theshopping cart.Themobile app users’can view Productname,quantity,total price&shipping cost fromthe cart.This screenhasfollowing options:-->Apply Voucher-->Total ProductPrice-->UpdateProduct Quantity-->RemoveProduct-->ContinueShopping-->Continue ToCheckout3.8Checkout Screen:The eCommerce MobileApps has a simplified checkout approachwith a single-screen.The users can get info regarding order detailslike shipping details,billing details,order summary,ordercomment,payment summary beforemaking the actualorder.-->Shipping Address-->Billing Details-->Order Summary-->ShippingMethods-->Order Comment-->PaymentSummary-->Proceed ToPayment3.9Payment Screen:The payment screen of mobile app displays both web-view&native payment methods.These apps support your website payment methods along with PayPal&COD payment options.Moreover, various other native payment options like PayU,Apple Pay,Amazon Pay,Braintree,Stripe,etc.can also be added in the app over additional cost.3.10My Account Screen:The users to viewthe completeaccount detailsincluding list of allprevious orders.Thisscreen has thefollowing options:-->Order History-->Update Profile-->ShippingAddress(s)-->Order Details-->Re-orderFeature3.11Order Details Screen:The Mobile App Builder offers a real-time order tracking in mobile apps.Order Details screen in the app displays shipping address, product summary,shipping and payment method,and total cost summary.The users can even track the delivery of previously placed orders.------------------------------------The End------------------------------------。
openvswitch 参数
一、OpenvSwitch 简介OpenvSwitch 是一个用于虚拟化的开源软件交换机，它可以在虚拟化环境中提供网络连接，可用于构建和管理虚拟化网络。
它支持多层交换功能、QoS 等多种网络功能，可以与虚拟化评台（如KVM、Xen、VMware等）进行集成，提供虚拟机间和虚拟机与物理网络之间的通信。
二、OpenvSwitch 参数介绍1. Bridge 参数在 OpenvSwitch 中，Bridge 是一个虚拟的二层交换机，它用于连接不同的端口和虚拟机，通过设置 Bridge 参数可以对其进行配置和管理。
- stp 参数：STP（Spanning Tree Protocol）是一种用于防止网络环路的协议，可以通过设置该参数来启用或者禁用 STP 功能。
- f本人l-mode 参数：当 Bridge 下的所有端口都失效时，可以通过设置 f本人l-mode 参数来决定 Bridge 的行为，可以选择 secure 或者 standalone 模式。
2. Port 参数在 OpenvSwitch 中，Port 是 Bridge 的具体端口，用于连接外部网络或虚拟机，通过设置 Port 参数可以对其进行配置和管理。
- tag 参数：可以为 Port 设置 VLAN 标签，用于实现 VLAN 的隔离和区分。
- trunks 参数：可以为 Port 设置可以通过的 VLAN ID，从而实现多个 VLAN 的通信。
3. Controller 参数Controller 是 OpenvSwitch 的控制器，用于控制交换机的行为，通过设置 Controller 参数可以对其进行配置和管理。
- controller 参数：可以设置 OpenvSwitch 的控制器，以实现交换机的远程控制和管理。
- controller-rate 参数：可以控制控制器的速率，用于限制控制器的数据流量。
4. QoS 参数OpenvSwitch 支持 QoS（Quality of Service），可以通过设置 QoS 参数来对网络流量进行控制和调度。
SiAECOSYS V2 IV代 EM系列控制器程序手册说明书
VOTOL EM Controller Program ManualIt is forbidden to non-specialists use!This manual was explained in detail for the IV generation EM series controller,which update download illustrates and parameter adjustment.Before using the software,please read this manual.In order to facilitate the operation,please keep this manual.In order to make the software of maximum utility,please make sure the end user to use this manual.Please be sure to read the manual carefully before starting the operation.Disclaimer:For theⅣgeneration of EM series controller program updates and parameter adjustment can only bedone by professional and technical personnel.If without the written permission of our company for theⅣVOTOL generation EM series,theapplication update to download and parameter of the controller adjustment is not allowed.It is forbidden to non-professional personnel operate this software.In the above event,our company will no longer be responsible for accident happens by controller.1.Software installation(only support win7/10)1.1USB Driver Installation(1)Download the“USB-to-serial-win10-20150814”file,decompressing file.(2)choose the suitable driver with your computer for installation.win7,win8,win10are available.1.11.Decompress the operation first2.Unzip the YH-340USB package and select CH341SER.EXE to install it.Follow the steps above to install(3)After installation,pls.connect the USB cable with controller and computer.If it’s unable to connect,pls.Check below steps.Right click“my computer”in the desktopthen click“device manager”choose“port(COM&LPT)”choose the COM with“!”,click“serach automatically for updated driver software”Close the software when you finishAfter running,please run the software directly:EM_V3series debugging program;If the port has”自2012已停产，请联系供货商处理方法(Pls contact supplier if it is stop production since2012)”First step:Install driver PL2303_Prolific_DriverInstaller_v110Second:Right click to update the driver and select Browse Computer to find the driver software.Thrid:Click to select from the list of drivers for your computer;Select version3.3.10.140(2009-11-19),click Next,close the window when finished;2.Controller connection2.1Connect controllerController host computer simple wiring diagramDescription:controller B+connects battery B+controller B-connects battery B-,controller electric door locks connect battery or controller B+;The USB debug line is connected to the controller debug port;2.1.1According to the controller with CAN or without CAN to select the appropriate USB debug line;with CAN controller need to check the CAN enable,without CAN does not need to check;EM200controller needs to exchange the debug line CAN-H and CAN-L ,otherwise can’t connect the controller;2.1.2Host computer selectionEM50EM100EM150without CAN chooseEM50EM100EM150with CAN chooseEM200chooseSpecific host model needs to inquire the related sales;3Open the computer device manager before connecting to the computer to check whether the USB port is successfullyinstalled.Select the appropriate host computer to connect the host computer to the serial port when the controller is not powered.After selecting the corresponding serial port on the device port,click CreatFile.2.2Then power on(connect with e-lock),click connect(in setting1page),the nominal voltage should not be0.If it’s0,click connect again.3.The settingSetting page11.1：Voltage equipment1.1.1、Battery voltage setting:Corresponding to the ECU voltage,absolutely not allowe overpressure.1.1.2、Lead-acid battery overvoltage,undervoltage,soft undervoltage basic value default:due to software settings defects,the original voltage compensation+1V.1.1.3、The lithium battery is set according to the actual lithium battery parameter value.Due to software setting defects,the original voltage compensation+1V.The original lithium battery parameters are compensated for+1V,and the total compensation is+2V.1.1.4、Attention1.1.4.1、Overvoltage fault:After open the electric door lock,the vehicle doesn’t move.The Controller overvoltage protection function starts.1.1.4.2、ECU undervoltage fault:due to the lithium battery protection board overvoltage device is too high or the undervoltage setting is too low,resulting in lithium battery protection,burning MOS.Please adjust suitable battery voltage before running the motor and controller(for lithium battery).Overvoltage:real overvoltage+3VUndervoltage:real undervoltage+1VSoft undervoltage:undervoltage +3Vg.real overvoltage 84V,set 87V.real undervotlage 60V,set 61V.Soft undervotlage:64V.1.2：Current device1.2.2、Phase current setting:can only be adjusted downwards.1.2.3、Attention1.2.3.1、Setting the busbar current too high,causing the ECU burn MOS.1.2.3.2、As the phase current value decreases,the corresponding motor stall protection time is shortened.Setting page 21throttle voltage adjust(1)low protection value:The throttle error is shown(2)Starting voltage:when the value is reached,the motor starts running(3)End voltage:when the value is reached,the controller thinks the full voltage is reached (it is recommended to set the voltage lower 0.2v compared with thactual torque voltage).(4)High protection value:when the value is higher than that,the torque fault will be displayed2Start setting adjustment (for tricycle gear box only)(1)Starting torque:used for gear combination(2)Combined torque:a force of lifting after gear clearance is combined(3)Upward slope:upward slope of motor torque(4)Downward slope:downward slope of motor torque3Controller and motor temperature protection function adjustment(1)Start:Enter into the function of temperature protection,limit the motor torque.(2)Over temperature:Cut off the output of motor torque(3)Recover:When the motor temperature lower than the temperature protection value,you can re-twist the throttle, then the motor will restore motivation(4)Maximum:The motor maximum temperature is150Setting for page23.1：Parameters setting for sports mode(S gear)3.2.1、Busbar current setting:According to the controller type current corresponding to the selection,the vehicle speed is adjusted according to the motor parameters.BOOST weak magnetic value>high speed weak magnetic value3.2.3、Automatic logout enablers,confirm by select:Check the jog button /uncheck the long press button,choose one3.2.3.1、Check to make the jog effective.The weak magnetic time enters the exit and can be adjusted. 3.2：Downhill electric brake assist：start by select“HDC Enable”,downhill electric brake assist(slow down in steep slopes)function.Enable electric brake by enter minimum speed,if less than the speed,the function will be invalid.3.2.1Value400corresponding to speed around15kmh(it depends on motor feature,sometimes with a3.2.2、Note:The drum motor is not suitable for use,resulting in loose motor shaft.3.3、Flux weakening compensation:only valid when the inner rotor motor type is selected as V-shaped magnetic steelNote:The maximum value of255is generally filled in953.4、Three gear setting：Confirm the motor base speed value adjustment setting parameter value.The basic speed is filled in according to the<Appendix EM_V3Parameter Adjustment Calculation Formula>.3.4.1、The low,medium,high,and third speed values are valid within100%of the parameter value,and the medium,high,and high speed values are exceeded and the100%parameter value is filled.Exceeded by weak magnetic file(medium,high,BOST)3.4.2、In the flux weakening area,the actual parameters of the motor are adjusted,and the vehicle speed is based on the road test.3.4.3、Single voltage mode:The high voltage value is invalid.3.4.4、Attention3.4.4.1、Drum motor:60KM/H motor weak magnetic speed is less than<120%,80KM/H motor weak magnetic speed is less than<125%,110KM/H motor weak magnetic speed is less than<135%.2.4.4.3Inner rotor motor Hall:The built-in Hall weak magnetic speed is less than<135%,and the external Hall weak magnetic speed is less than170%.3.4.4.3、Internal rotor motor magnetic knitting:Built-in flux weakening speed<230%.3.4.4.4The motor base speed exceeds100%of the motor speed value and enters the weak value zone adjustment parameter.BOOST>High speed weak magnetic file.3.4.4.5Weak magnetic failure:The flux weakening value exceeds the motor and controller parameter values,causing the motor to demagnetize and the controller to burn MOS.3.5、Jog/push selection:choose one3.6、The three-speed default gear:the electric door lock opens the default several options.3.7、Soft start setting:The smaller the value,the softer the start.3.8、Speed limit setting:3.8.1、Function selection:speed limit,unlimited speed,two choices,default speed limit3.8.2、The speed limit speed is calculated based on vehicle parameter requirements.<Appendix EM_V3 parameter adjustment calculation formula>3.8.3、The upper limit speed and the solution speed limit are determined according to customer requirements.Setting page33.1、Motor Setting：3.1.1、Motor pole pairs：Fill in according to the motor manufacturer parameters.3.1.2、Hall phase shift angle：Fill in according to the motor manufacturer parameters.3.1.3、Motor type：Fill in according to the motor manufacturer parameters.Note:Wheel Hub motor is surface mount3.1.4、Hall,phase line exchange:exchange the motor forward and reverse.3.2、The controller to speedometer date output has2types:Single-line speedometer and hall speedometer, it needs to be decided by the vehicle’s speedometer.3.3、Moving assist and cruising function：Used in two-wheelersNote:Speed"3KM/H,torque9~19N.M3.4Cruise function:function selection,the default does not open.3.5Dual voltage setting:default single voltage。
Matrox Odyssey Xpro与IMPERX IPX-2M30H-L相关的Camera In
IMPERX IPX-2M30H-L June 8, 2009 Basics about thecameraCamera Descriptions▪ Effective resolution: 1920 ⨯ 1080 ⨯ 12-bit @ 32 fps.▪ Camera Link BASE interface (Dual tap).▪ Progressive scan.▪ Internal sync.▪ External or internal exposure control.▪ 40 MHz pixel clock rate.Mode of operations as per Matrox Imaging (in parentheses as per camera manufacturer)Interface Mode▪ Continuous▪ Pseudo-continuous (CC Expose Control = Computer) ▪ Asynchronous reset (CC Expose Control = Computer)Basics about theinterface modesCamera Interface BriefsMode 1: Continuous▪ 1920 ⨯ 1080 ⨯ 12-bit @ 32 fps.▪ Camera Link BASE interface (Dual tap).▪ Progressive scan.▪ Matrox Odyssey Xpro receiving LVAL, FVAL, PCLK and video fromcamera.▪ DCF used: 2M30HL_1920x1080_12bitCon.DCFMode 2: Pseudo-Continuous▪ 1920 ⨯ 1080 ⨯ 12-bit.▪ Camera Link BASE interface (Dual tap).▪ Progressive scan.▪ Matrox Odyssey Xpro sending TIMER1 OUT (CC1) signal to camera toinitiate and control the exposure.▪ Matrox Odyssey Xpro receiving LVAL, FVAL, PCLK and video fromcamera.▪ DCF used: 2M30HL_1920x1080_12bitPcon.DCFIMPERX IPX-2M30H-L June 8, 2009Basics about theinterface modes Camera Interface Briefs (cont.)Mode 2: Pseudo-ContinuousMode 3: Asynchronous reset ▪ 1920 ⨯ 1080 ⨯ 12-bit.▪ Camera Link BASE interface (Dual tap).▪ Progressive scan.▪ Matrox Odyssey Xpro receiving external trigger signal.▪ Matrox Odyssey Xpro sending TIMER1 OUT (CC1) signal to camera toinitiate and control the exposure.▪ Matrox Odyssey Xpro receiving LVAL, FVAL, PCLK and video fromcamera.▪ DCF used: 2M30HL_1920x1080_12bitAsync.DCFSpecifics aboutthe interface modes Camera Interface DetailsMode 1: Continuous▪ Frame Rate: Matrox Odyssey Xpro receives the continuous video fromthe camera at 32 frames per second.▪ Exposure time: Exposure time is set using the Imperx CameraConfiguration Utility. Refer to the camera manual for commandsdescription and usage.Continued…IMPERX IPX-2M30H-L June 8, 2009 Specifics aboutCamera Interface Details (cont.)the interface modesMode 1: Continuous▪Camera Configuration: The camera mode is set as follows using theImperx Camera Configuration Utility. Refer to the camera manual forcommands description and usage.Mode SettingBit Depth 12 bitsOutput Mode Dual TapsTrigger OFFMode 2: Pseudo-Continuous▪Frame rate: The frame rate is determined by the frequency of theTIMER1 OUT (CC1) signal.▪Exposure time: The exposure is determined by the active duration ofTIMER1 OUT (CC1), which can be modified in the DCF using MatroxIntellicam, ONL imCamControl() or imDigControl() function, or with theMIL MdigControl() function. Consult the respective manual for moreinformation.▪Camera Configuration: The camera mode is set as follows using theImperx Camera Configuration Utility. Refer to the camera manual forcommands description and usage.Mode SettingBit Depth 12 bitsOutput Mode Dual TapsTrigger CCMode StandardCC Expose Control ComputerMode 3: Asynchronous Reset▪Frame rate: The frame rate is determined by the frequency of theexternal trigger signal.▪Exposure time: Same as in Mode 2: Pseudo-continuous.▪Camera Configuration: Same as in Mode 2: Pseudo-continuous.Cabling details for theCabling Requirementsinterface modesModes 1 and 2: Continuous, Pseudo-continuous▪Cable and Connection: Standard Camera Link cable.Matrox Odyssey XproCamera Interface Application NoteIMPERX IPX-2M30H-L June 8, 2009 Cabling details for theCabling Requirements (cont.)interface modesMode 3: Asynchronous reset▪Cable and Connection: Standard Camera Link.▪External trigger: External trigger should be connected to the OPTOTRIG input of the 9-pin connector (pins 7 and 2) on the Expanded I/Oadapter bracket.EXPANDED I/O BRACKET(9-pin connector) External Trigger SourceOPTOTRIG + 07 ←LINE SIGNAL --OPTOTRIG - 02 ←LINE GROUND --The DCFs mentioned in this application note are also attached (embedded) to this PDF file – use the Adobe Reader’s View File Attachment to access the DCF files. The information furnished by Matrox Electronics System, Ltd. is believed to be accurate and reliable. Please verify all interface connections with camera documentation or manual. Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance. © Matrox Electronic Systems Ltd, 2009-2011.Matrox Electronic Systems Ltd.1055 St. Regis Blvd.Dorval, Quebec H9P 2T4CanadaTel: (514) 685-2630Fax: (514) 822-6273。
MB2S MB4S MB6S MB8S MB10S 芯片数据手册说明书
Features◆ Plastic package has Underwriters Laboratory FlammabilityClassification 94V-0◆ Glass passivated chip junctions ◆ High surge overload rating:35A peak ◆Saves space on printed circuit boards◆ High temperature soldering guaranteed:260℃/10 seconds ◆ Add suffix "E" for Halogen Free◆ Halogen-free according to IEC 61249-2-21 definitionMechanical Data◆Case:Molded plastic body over passivated junctions ◆ Terminals: plated leads solderable per MIL-STD-750,Method 2026◆ Mounting Position:Any ◆Weight:0.078 oz.,0.22gMaximum Ratings & Electrical Characteristics(T A =25℃ unless otherwise noted)ParameterSymbol MB2S MB4S MB6S MB8S MB10S Unit Maximum repetitive peak reverse voltage V RRM 2004006008001000V Maximum RMS voltage V RMS 140280420560700V Maximum DC blocking voltageV DC2004006008001000VMaximum Average forward output current (see Fig.1) on glass-epoxy P.C.B on aluminum substratePeak forward surge current 8.3 MS single HALF sine-wav superimposed on rated load (JEDEC Method)A350.5(1)0.8(2)A I F(AV)I FSM p p ()Rating for fusig (t<8.3ms)I 2t A 2sec Maximum instantaneous forward voltage drop per leg at 0.4AMaximum DC reverse current at TA=25℃rated DC blocking voltage per leg TA=125℃R 1.00V585(1)VFμAIR5100θJA R θJA R θJLCj pF Operating junction and storage temperature rangeT J,T STG℃Notes:1. On glass epoxy P.C.B. mounted on 0.05×0.05"(1.3×1.3mm) pads-55 to +15020(1)70(2)℃/W Typical junction capacitance per at 4.0V,1.0MHz 13Typical thermal resistance per leg2. On aluminum substrate P.C.B.whth an area of 0.8×0.8"（20×20mm ）mounted on 0.05×0.05"(1.3×1.3mm) solder padRatings and Characteristics Curves(TA = 25℃ unless otherwise noted)Figure 1.Derating Curve for Output Rectified Current Figure 4.Typical Reverse Leakage Characteristics Per LegFigure 5.Typical Junction Capacitance Per Leg Figure 2.Maximum Non-Repetitive Peak ForwardSurge Current Per LegFigure 3.Typical Forward Voltage Characteristics Per LegMarking。
unis lswm2sp4p-z接口模块扩展卡 用户手册-6p103.pdf说明书
UNIS LSWM2SP4P-Z接口模块扩展卡用户手册-6P1031 产品介绍1.1 概述LSWM2SP4P-Z接口模块扩展卡对外可提供4个SFP+口。
图1LSWM2SP4P-Z外观图(1): SFP+口状态指示灯(2): SFP+口(3): 松不脱螺钉(4): 扳手说明：LSWM2SP4P-Z接口模块扩展卡适用于UNIS多款交换机产品，其适用机型的准确信息随着时间变化有更新的可能性，若您需要更详细的适配信息，请咨询UNIS公司市场人员或技术支持人员。
1.2 SFP+口介绍LSWM2SP4P-Z接口模块扩展卡的SFP+口可选配的光模块和电缆为：千兆SFP模块、万兆SFP+模块、万兆SFP+电缆，具体信息请参见表1、表2、表3。
表1千兆SFP模块类型及其属性表对外型号中心波长(nm)接口连接器接口线缆规格模式带宽(MHz*km)最大传输距离SFP-GE-SX-MM 850-A 850 LC50/125µm多模光纤500 550m400 500m62.5/125µm多模光纤200 275m160 220mSFP-GE-SX-MM 850-D 850 LC50/125µm多模光纤500 550m400 500m62.5/125µm多模光纤200 275m160 220mSFP-GE-LX-SM 1310-A 1310 LC9/125μm单模光纤- 10km50/125μm多模光纤500/400550m62.5/125μm多模光纤500 550m对外型号波长(nm)连接器接口线缆规格带宽(MHz*km)传输距离SFP-GE-LX-SM 1310-D 1310 LC9/125μm单模光纤- 10km50/125μm多模光纤500/400550m62.5/125μm多模光纤500 550mSFP-GE-LH40-S M1310 1310 LC9/125μm单模光纤- 40kmSFP-GE-LH40-S M1310-D 1310 LC9/125μm单模光纤- 40kmSFP-GE-LH40-S M1550 1550 LC9/125μm单模光纤- 40kmSFP-GE-LH80-S M1550 1550 LC9/125μm单模光纤- 80kmSFP-GE-LH80-S M1550-D 1550 LC9/125μm单模光纤- 80kmSFP-GE-LH100-SM1550 1550 LC9/125µm单模光纤-100km对外型号波长(nm)连接器接口线缆规格带宽(MHz*km)传输距离SFP-GE -LX-SM 1310-BI DI TX：1310RX：1490LC9/125µm单模光纤- 10kmSFP-GE -LX-SM 1490-BI DI TX：1490RX：1310LC9/125µm单模光纤- 10km说明：SFP-GE-LX-SM1310-BIDI与SFP-GE-LX-SM1490-BIDI两款模块需要成对使用。
小凡模拟器教程
现在新手学cisco的，基本都在用Dynamips和PT ，但是很多新手不会使用Dynamips，或许你看了这篇文章之后，至少会对Dynamips有点认识，应该基本都会用了。
Now，Follow Me 。
看图说话：按照图中用数字标出的序号来解释该区域：区域1：这里是选择路由器和交换机的个数的，这个地球人应该都知道吧。
区域2：这里可以选择一些不需要Cisco IOS的模拟设备。
如：FrameRelay交换机ATM交换机。
区域3：这里是选择设备类型的，以上都是Dynamips目前所支持的设备类型。
区域4：这里是选择设备类型、IOS存放路径、idle-pc值、NPE类型、虚拟内存（表示虚拟设备的RAM所占的内存大小,因为dynamips在模拟时候需要将主机的物理内存模拟成模拟设备的RAM）、寄存器。
区域5：这里是配置分布式的dynamips的设置区域区域6：这里是设置可以和主机（就是你的物理机）通信的。
区域7：可以直接读取真实设备里的NVRAM里的配置文件(.ini格式)区域8：输入目录是指生成的bat文件保存路径，自己建立哦。
下面根据拓扑来介绍:根据这个拓扑，需要模拟出3个路由器和1个交换机。
下面我们用DynamipsGUI 来配置脚本文件。
（Ps:DynamipsGUI和Dynamipsee都是可视化的写Dynamips的脚本程序。
不是模拟器！！真正的模拟器是Dynamips 。
）下面模拟上面的拓扑全过程：1.打开DynamipsGUI。
然后在[区域1]那里选择3个路由器和1个交换机。
并且选择[桥接到PC](桥接到PC的作用就是用物理机telnet到模拟出来的设备，然后就可以对设备进行配置)，在这里路由器我用的IOS是7200的，交换机用的是3640的（IOS网上很多，可以自己去找。
），所以总的来说我只需要2个IOS文件既可，所以在设备类型这里我只需要勾选7200和3640这2个复选框既可。
如图：2.接着就是在[区域2]那里选择设备的类型和IOS文件路径，选择好之后，需要计算idle值，点击[计算idle]按钮(idle-pc只是为了解决在开启模拟设备的时候不至于你的物理机CPU占有率达到100%,所以这个值很重要)3.点击[计算idle]按钮之后，会弹出一个提示，选择确定即可：4.接着就会弹出一个窗口。
0b6220vp的功能及参数
一、功能1. 高速交换：0b6220vp支持10/100/1000Mbps自适应以太网端口，实现高速数据传输，满足各类工业应用需求。
2. 网络管理：0b6220vp支持SNMP、RMON等多种网络管理协议，便于用户进行远程监控和管理。
3. VLAN划分：通过VLAN技术，可以将网络划分为多个虚拟局域网，实现网络的隔离和优化。
4. 端口镜像：支持端口镜像功能，可以将指定端口的流量复制到另一个端口，便于用户进行网络分析和故障排查。
5. QoS（服务质量）：支持QoS功能，可根据用户需求对网络流量进行优先级管理，确保关键业务得到保障。
6. 端口安全：支持端口安全功能，防止非法用户接入网络，保障网络安全。
7. 防火墙：内置防火墙功能，对网络流量进行安全检查，防止恶意攻击。
8. 流量监控：支持流量监控功能，实时查看网络流量状况，便于用户进行网络优化。
9. 网络冗余：支持链路聚合和链路备份功能，提高网络可靠性。
10. 环境适应性强：0b6220vp适用于各种恶劣环境，如高温、潮湿、震动等。
二、参数1. 交换容量：16Gbps2. 端口数量：24个10/100/1000Mbps自适应以太网端口3. VLAN数量：4096个4. 支持VLAN ID：1-40945. 端口镜像：支持端口镜像功能，可将指定端口的流量复制到另一个端口6. QoS：支持4个队列，支持WRR、SP、DSCP等QoS策略7. 端口安全：支持MAC地址绑定、端口安全限制等安全策略8. 防火墙：支持IP过滤、MAC过滤、端口过滤等防火墙功能9. 网络管理：支持SNMP、RMON、Web管理、CLI等多种网络管理方式10. 环境适应性强：工作温度：-40℃~75℃，存储温度：-40℃~85℃；相对湿度：5%~95%（无冷凝）三、应用场景1. 工业控制网络：0b6220vp适用于工业控制网络，如PLC、DCS等设备的网络连接，实现高速、稳定的数据传输。
SpectraMax M2 和 M2e 系统用户指南说明书
IntroductionThe SpectraMax® M2 and M2e Systems from Molecular Devices are multi-detection microplate readers with dual-monochromators, dual-mode cuvette ports, and top- and bottom-reading capability (top-reading only on the M2). Detection modalities include absorbance (UV-Vis Abs) and fluorescence intensity (FI). Endpoint, kinetic, spectrum and area-well scanning read types and the PathCheck® Sensor allow homogeneous and heterogeneous microplate assays to be performed in one flexible system. SpectraMax M2 readers provide for easy conversion and optimization of very-low-throughput to medium-high-throughput assays, faster, more precise results and reagent savings. In addition, combined absorbance andfluorescence intensity assays can be run by issuing a single read command.KEY FEATURES• M ulti-detection capability • Top- and bottom-read (M2e only)• Dual-mode cuvette port • Dual monochromators• PathCheck and well volume sensor • Instrument and software validation •Robot compatibleMulti-detection microplate readers with dual-mode cuvette portsDual monochromatorsWith SpectraMax M2/M2e readers, there is no need for expensive filters. The system uses two scanning monochromators to determine optimal excitation and emission settings. Changing methods or fluorophores requires only a few mouse selections to optimize the system.Patented PathCheck sensorThe PathCheck sensor from Molecular Devices is the only patented †technology available that measures the depth (optical pathlength) of samples in a microplate. With SoftMax® Pro Software, it can automatically normalize the well absorbance to a cuvette equivalent pathlength of 1 cm—similar to using 96 or 384 cuvettes simultaneously. The PathCheck sensor allows standardcurves to be eliminated, and for compounds with a known extinction coefficient,concentration can be calculated directly from absorbance.Customize data collection and analysis. With SoftMax ProSoftware, choose endpoint, kinetic, spectral scan or well scan; view kinetic and spectrum runs in real time; collect and store data from multiple microplates, cuvettes, graphs, analysis tables and notes sections in the same data file.Applications• DNA/RNA/protein quantitation and purity • PicoGreen/NanoOrange/Bradford • ELISAs/enzyme kinetics (i.e., Km, Ki, etc.)• Drug dissolution profiles• Live/Dead Viability/cytotoxicity assays • Caspase-3 and protease assays• cAMP assays using CatchPoint® Assay Kits • Low volume applicationsComprehensive data analysisSoftMax Pro Software provides data acquisition, analysis and management capabilities, allowing cross-plate analysis and custom calculations. There is no need to export data to a spreadsheet program.Instrument and software validationThe SpectraT est® ABS1 Absorbance and SpectraT est FL1 Fluorescence Validation T est Plates provide validation of the system’s optical characteristics. The SoftMax Pro Softwarevalidation package and IQ/OQ validation protocols include tools for FDA 21 CFR Part 11 compliance.Plate stacker and robot integrationThe SpectraMax M2 and M2e readers can be integrated with the StakMax® Microplate Stacker from Molecular Devices in a matter of minutes. For a higher degree of automation, the Automation Vendor Partners Program has streamlined the integration of our microplate reader systems with all leading partner robots.Highly customizable low volume applicationsMolecular Devices’ unique SpectraDrop™ Micro-VolumeMicroplate offers the highest throughput solution for low volume measurement available on the market today. Innovative and flexible design features enable accelerated sample preparation time and increased laboratory productivity in DNA, RNA andprotein research. The SpectraDrop microplate assures uniform and reproducible analysis and integrates seamlessly with the StakMax stacker for greater research capacity.Validation plates for optical performance. SpectraT est Validation T est Plates for absorbance and fluorescence intensity provide a complete traceable solution for validating optical performance of the SpectraMax M2 reader, automatically.A solution for low volume applications. The SpectraDrop Micro-Volume microplate offers the ability to use as little as 2 µL sampleswith 24 or 64-well plates.Absorbance photometric performanceWavelength selection Monochromator, tunable in 1 nm incrementsWavelength range200–1000 nm Wavelength bandwidth≤ 4.0 nmWavelength accuracy±2.0 nmWavelength repeatability±0.2 nmPhotometric range0–4.0 ODPhotometric resolution0.001 ODPhotometric accuracy (microplate)< ±0.006 OD ±1.0%, 0–2 OD Photometric accuracy (cuvette)< ±0.005 OD ±1.0%, 0–2 OD Photometric precision< ±0.003 OD ±1.0%, 0–2 OD Baseline flatness< 0.001 ODStray light< 0.05% @ 230 nm Fluorescence photometric performanceDual monochromators 1 nm increment selection EX Wavelength range250–850 nmEM Wavelength range M2: 360–850 nm M2e: 250–850 nmWavelength bandwidth (EX, EM)9 nmT op-read optimized sensitivity 5 pM (fluorescein) in 96 wells T op-read guaranteed* sensitivity15 pM (fluorescein) in 96 wells Bottom-read optimizedsensitivity (M2e only)10 pM (fluorescein) in 96 wells Bottom-read guaranteed*sensitivity (M2e only)25 pM (fluorescein) in 96 wellsTime-Resolved Fluorescence (secondary mode)EX Wavelength range250–850 nmEM Wavelength rangeM2: 360–850 nmM2e: 250–850 nmData collection50–1450 µsec., 200 µsec. increments Guaranteed sensitivity*7 pM Eu-chelateLuminescence (secondary mode)Wavelength range (M2)360–850 nmWavelength range (M2e)250–850 nmGuaranteed sensitivity*50 fM alkaline phosphataseGeneral photometric performancePlate formats6, 12, 24, 48, 96, 384 wellsLight source Xenon flash lamp (1 joule/flash) Detector Photomultiplier tube (PMT)Read time**96 wells:384 wells:Abs 18 sec., FI 15 sec.Abs 49 sec., FI 45 sec.Shaker time0 to 999 secondsT emperature control Ambient +4°C to 45°CT emperature uniformity< 1°C at 37°C set pointT emperature accuracy±1°C at 37°C set pointGeneral specificationsDimensions (in.)8.6 (H) x 22.8 (W) x 15 (D) Dimensions (cm)22 (H) x 58 (W) x 38 (D)Weight35 lbs. (15.9 kg)Power consumption< 125 wattsPower source100–240 Vac, 3 A, 50/60 HzRobot compatible Y es†T he PathCheck sensor is covered under U.S. Patents 5,959,738, 6,188,476, 6,320,662, 6,339,472, 6,404,501, 6,496,260, and 6,995,844. The SpectraMax M2 and M2e readers are also covered under U.S. Patents 6,097,025 (M2e only), 6,232,608,6,236,456, 6,313,471, 6,316,774, 6,693,709, and 6,825,921.* For properly functioning, operated, and maintained equipment.** Measurement type may extend read time.Contact UsPhone: +1-800-635-5577Web: Email: ***************Check our website for a current listing of worldwide distributors.The trademarks used herein are the property of Molecular Devices, LLC or their respective owners. Specifications subject to change without notice. Patents: /productpatents FOR RESEARCH USE ONL Y. NOT FOR USE IN DIAGNOSTIC PROCEDURES. ©2019 Molecular Devices, LLC 5/19 0120-1323NPrinted in USAOrdering informationContact your Molecular Devices sales representative for configuration options.。
Digilent PmodI2S 音频模块说明书
1300 Henley CourtPullman, WA 99163509.334.6306PmodI2S™ Reference ManualRevised April 12, 2016This manual applies to the PmodI2S rev. AOverviewThe Digilent PmodI2S is a stereo audio module that accepts all major audio data interface formats and sample rates.Features include:∙Stereo 24-bit D/A converter∙Output converted audio signals through standardheadphone jack∙Supports all major audio data interface formats∙Accepts 16-24 bits of audio data∙Small PCB size for flexible designs 1.0 in × 0.8 in (2.5cm × 2.0 cm)∙6-pin Pmod port with GPIO interfaceThe PmodI2S.1 Functional DescriptionThe PmodI2S utilizes a Cirrus Logic CS4344 Stereo D/A converter to take digital audio data and output the corresponding analog signal through a standard stereo headphone jack. It is designed to work at standard audio rates, although the master clock can run anywhere from 512 kHz to 50MHz.2 Interfacing with the PmodThe PmodI2S communicates with the host board via the GPIO protocol. As this module uses the Integrated Interchip Sound (I²S) protocol, several different clock lines are required.The fastest clock signal will be the Master Clock (MCLK); as the name implies, this signal will keep everything nicely synchronized. The sample rate (Fs) clock, also known as the Left-Right Clock (LRCK) or the Word Select (WS) clock, indicates when a particular set of data is to be placed on the left or right audio channel for stereo sound.The final clock is the bit clock, labeled as the Serial Clock (SCK) on the Pmod. This clock can either be provided as a signal from the host board, or can be internally derived by the Pmod itself by providing at least two consecutiveframes of the LRCK without providing any SCK signals. The on-board chip will then measure the Master Clock rate and the LRCK rate and determine an appropriate bit clock rate. However, the MCLK/LRCK ratio must meet a set ratio in order to generate an internal SCK, as outlined in the table below from the CS4344 datasheet. Internal SCK ModeExternal SCK Mode16-bit data and SCK = 32*Fs if MCLK/LRCK = 1024, 512, 256, 128, or 64Up to 24-bit data with data valid on the rising edge of SCKUp to 24-bit data and SCK = 48*Fs if MCLK/LRCK = 768, 384, 192, or 96Up to 24-bit data and SCK = 72*Fs if MCLK/LRCK = 1152Table 1. MCLK/LRCK ratio.The ratio between the MCLK and the LRCK rates must be an integer ratio so that the internal clock dividers can determine an appropriate bit rate. A table of commonly used sample rates and their corresponding MCLK rates from the CS4344 datasheet is provided below:Table 2. Sample rates and corresponding MCLK rates.The I²S protocol requires that data is clocked in on the falling edge of the bit clock. The first bit of data (MSB) is not clocked in on the falling edge until a first complete bit clock cycle has passed after the LRCK has changed state. The rising edge of the bit clock clock informs the on board chip that the next bit of data can be read.The delay of one bit clock cycle before transferring data at each LRCK change also implies that the least significant bit (LSB) of data will be transferred after the LRCK change has occurred. No particular phase relationship must be followed with this on-board chip, although the phase relationship must stay consistent throughout audio session. An example timing diagram of I²S from Texas Instruments is shown below:Figure 1. PmodI2S timing diagram.Pin Signal Description1 MCLK Master Clock2 LRCK Left-right Clock3 SCK Serial Clock4 SDIN Serial Data input5 GND Power Supply Ground6 VCC Positive Power SupplyTable 3. Pinout description table.Any external power applied to the PmodI2S must be within 3V and 5.25V; however, it is recommended that Pmod is operated at 3.3V.3 Physical DimensionsThe pins on the pin header are spaced 100 mil apart. The PCB is 1 inch long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header.。
交换机详细功能列表
SDN/OPENFLOW
VxLAN MPLS/VPLS 冗余相关支持VXLAN 二层交换 支持VXLAN 路由交换 支持VXLAN 网关 支持L3 MPLS VPN 支持L2 VPN: VLL (Martini, Kompella) 支持MCE 支持MPLS OAM 支持VPLS,VLL 支持分层VPLS，以及QinQ+VPLS接入 支持P/PE功能 MRPP Full EAPS ULPP ULSM VSF 支持LDP协议 支持EAD安全解决方案 支持Portal认证 支持Portal认证 支持SSL 支持IEEE 802.1x和IEEE 802.1x SERVER 支持AAA/Radius 支持HWTACACS,支持命令行认证 支持SSHv1.5/SSHv2 支持ACL流过滤机制 支持OSPF、RIPv2 及BGPv4 报文的明文及MD5密文认证
ARP IPv4路由特性
支持Loopback Detection Function 支持ARP Proxy 支持ARP扫描预防 支持ARP欺骗攻击 支持ARP卫士 支持免费ARP 支持动态ARP检测 支持ARP数量控制 支持DHCP Relay 支持DHCP Snooping 支持DHCP Server 支持DHCP option 82 支持DHCP option 43/60 支持DHCP option 61/67 支持ICMP 支持DNS Client 支持DNS Proxy 支持静态路由 支持RIPv1/v2 支持OSPFv2 支持IS-IS 支持BGPv4 支持OSPF/IS-IS/BGP GR (Graceful Restart优雅重启) Multi-neting(32 secondary ip) Recursive route Black hole route GRE tunnel L3 Loopback interface L3 host routing dynamic age Igmp proxy 支持Route aggregation 支持Anti IP packet DOS attack Multicast static route DVMRP VRRP HSRP Keep alive gateway L3 station move BFD 支持CIDR 支持等价路由 支持策略路由 支持路由策略 支持ICMPv6
enbass恩倍思拼接处理器软件说明
enbass恩倍思拼接处理器软件说明摘要：一、引言1.介绍enbass恩倍思拼接处理器软件2.阐述其在图像处理领域的应用二、软件功能与特点1.图像拼接处理2.高性能计算3.实时处理4.自动校正三、应用场景1.无人机航拍2.机器人视觉3.智能监控4.其他需要图像拼接处理的场景四、软件操作简便1.界面友好2.支持多种输入输出格式3.易于上手五、结论1.总结enbass恩倍思拼接处理器软件的优势2.展望其在图像处理领域的发展前景正文：一、引言近年来，随着科技的飞速发展，图像处理技术在各个领域得到了广泛应用。
在此背景下，enbass恩倍思拼接处理器软件应运而生，成为一款备受瞩目的图像处理工具。
本文将详细介绍这款软件的特点及应用，以帮助大家更好地了解并运用它。
二、软件功能与特点1.图像拼接处理enbass恩倍思拼接处理器软件能够实现多张图像的自动拼接，消除重叠区域，生成一张完整的图像。
这一功能在航拍、监控等领域具有重要意义。
2.高性能计算软件采用高性能计算方法，能够快速处理大量图像数据，满足实时性的要求。
3.实时处理软件支持实时处理，用户可以实时查看拼接结果，便于快速调整参数，获得理想的拼接效果。
4.自动校正enbass恩倍思拼接处理器软件能够自动检测并校正图像的畸变，提高图像质量。
三、应用场景1.无人机航拍在无人机航拍领域，enbass恩倍思拼接处理器软件能够将无人机拍摄的多个角度的图像快速拼接成一张完整的俯视图，为用户提供更为丰富的信息。
2.机器人视觉在机器人领域，软件能够实现对机器人摄像头所采集的多张图像进行拼接处理，提高机器人对周围环境的感知能力。
3.智能监控在智能监控领域，enbass恩倍思拼接处理器软件可以对多个监控摄像头的画面进行拼接，消除监控盲区，提高监控效果。
4.其他需要图像拼接处理的场景此外，软件还可以应用于虚拟现实、地图制作等其他需要图像拼接处理的场景。
四、软件操作简便1.界面友好enbass恩倍思拼接处理器软件采用直观的界面设计，用户可以轻松地完成图像导入、拼接参数设置等操作。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
如何支撑项 目过程
启动、计划阶段
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
预 算 信 息
费率模板固化了取费标准， 可根据实际情况，由相关管 理部门制定不同的费率模板， 供项目经理简便调用。
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动、计划阶段
系统的作用
系统的具体功能
3
成本控制
分包商入围 分包商定价 项目分包申请
如何实现项 目控制
功 能
系统的作用
系统的具体功能
3
质量控制
编制质量检查计划 按计划进行检查 质量检查反馈
如何实现项 目控制
功 能
系统的作用
系统的具体功能
3
质量控制
编制质量检查计划 按计划进行检查 质量检查反馈
如何实现项 目控制
组 织 信 息
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
执行阶段
根据管理需要，对项目实施过程中关键节点进行管理
根据项目的不同状态，将项目 进行分类，便于查找出相应的 项目进行操作
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
执行阶段
根据管理需要，对项目实施过程中关键节点进行管理
功 能
生产部门
SC-2-01 项目启动、 计划管理
SC-2-02 项目执行 管理
SC-2-03 项目收尾 管理
SC-3-01 客户关系 管理
SC ZN
职 能 管 理
市场管理部门 项目管理部 风险管理部 财务部 人力资源部
ZN-1-01 变更管理
ZN-1-02 分包管理
ZN-1-03 采购管理
ZN-1-04 质量管理
全省统一规划
经营分析
经营分析
共性 功能
工程
设计 ……
共性 功能
省公司需求
专业公司需求
一线员工需求
项目管理体系模型
概述
系统定位
系统建设思路
系统功能架构
决 策 层
经营分析
控 制 层
任务栏 预警 查询
市场管理 合同管理
管理沟通
消息提醒 报表
项目管理
客户关系管理
操 作 层
业务核算管理 业务人力资源管理 客商管理
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
结尾阶段
根据管理需要，对完工后项目关键节点进行管理
针对完工项目的竣工资料提交、 验收、审计等环节通过系统进 行管理和支撑
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
结尾阶段
根据管理需要，对关键里程碑节点进行管理
功 能
系统的作用
系统的具体功能
计 划 信 息
抓住项目全过程的关键里程 碑，做好项目推进计划。
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动、计划阶段
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
在项目启动期，进行人员组织 配置，固化标准项目组成员类 型，明确各成员的职责，通过 系统落实相关职责
资产管理
业务核算
人力
财务辅助平台
BSP2.0 财务
1、业务信息需财务支撑的信息通过业务核算及财务辅助平台，将处理后信息传递到财务，并返回做账信息到业务； 2、将于业务相关的人力信息—人员的成本信息，通过人工成本的分摊的处理，并传递到财务系统； 3、通过完整的业、财、人信息，可提供详细的查询、各级所需报表、及综合的经营分析；
中国通信服务江西公司项目管理体系建设
EMOSS-BSP2.0 系统介绍
江西宇创科技 2012年11月
目录
1.概述
4.后续
2.功能
EMOSS—BSP2.0
3.特点
1
概述
满足总部项目管理体系 建设的规范要求， BSP2.0系统主要为运营 EMOSS 简单易学 域提供支撑 BSP2.0
录入简便高效
EMOSS—BSP2.0系统定位
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动
计划
控制
执行
结束
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动、计划阶段
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
通过项目立项的依据，固化 项目颗粒度的要求，实现真 正的单项核算
信息查询快速
主动提醒
业务支撑管理平台
系统建设思路
概 述
系统定位
系统功能架构
项目管理体系（PMS）管理模型
C-1-1 商机管理 C-1-2 投标管理 C-1-3 合同管理
C-2-1 项目启动、计划管理 C-2-2 项目执行管理 C-2-3 项目收尾管理
C-3-1 客户关系管理
（市场营销 SC-1）
（项目实施 SC-2）
通过项目的预、 核、结实现项 目的单项核算
6
项目结束后， 如何实现项目 的可量化、可 评估，实现项 目的闭环管理
功 能
系统的作用
系统的具体功能
1
协同化管理
实现全省各专业公司之间业务信息、 及资源共享，有利于公司内全面协同， 提升公司整体战斗力。
1
精确化管理
及时掌控各专业公司业务营 销、实施和售后等动态情况 ，及时分析各专业公司业务 经营情况，有利于公司对各 专业公司进行精确化管理。
s-1-02 分包管理 s-1-03 采购管理 s-1-04 质量管理
（客户维系 SC-3）
s-1-05 s-1-06 安全管理 风险管理 s-2-05 成本管理 s-1-07 项目后评估
业务支撑 ZN-1
s-1-01 变更管理 s-2-01 列账管理
辅 助 活 动
财务 ZN-2 人力资源 ZN-3
2
如何支撑项 目过程
结尾阶段
根据管理需要，对关键里程碑节点进行管理
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
结尾阶段
根据管理需要，对关键里程碑节点进行管理
功 能
系统的作用
系统的具体功能
3
如何实现项 目控制
范 围
质 量
成 本
进 度
功 能
系统的作用
系统的具体功能
3
成本控制
分包商入围 分包商定价 项目分包申请
基 本 信 息
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动、计划阶段
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
预 算 信 息
提供多种预算模式，通过费 率模板固化以往经验，通过 一口价适应业务发展需求
功 能
系统的作用
系统的具体功能
2
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
预 算 信 息
细化成本费用类型，覆盖主 要成本类型。
功 能
系统的作用
系统的具体功能
2
如何支撑项 目过程
启动、计划阶段
在启动计划阶段，系统主要通过项目立项将项目基本信息、预算信息、里程碑计划 及项目人员组织信息进行管理
支撑江西省项目管理体系建设，立足省通服公 总部项目管 一线使用者 理体系建设 司，涵盖多个专业，贯穿营销阶段 、项目实施阶 操作需求 要求 段 、客户维系全过程，简单易用的。 省公司自身 管理需求 在原有BSP1.0基础上，根据总部项目管理体系要求和自身需求，从 广度和深度上对BSP提出新增和优化的需求。
成本控制
分包商入围 分包商定价 项目分包申请
如何实现项 目控制
由项目管理部针对入围分包商 进行定价管理
功 能
系统的作用
系统的具体功能
3
成本控制
分包商入围 分包商定价 项目分包申请
如何实现项 目控制
功 能
系统的作用
系统的具体功能
3
成本控制
分包商入围 分包商定价 项目分包申请
如何实现项 目控制
功 能
决 策 管 理 生 产 管 理
管理要素共性 根据业务调整
顾 客 要 求
公司领导
JC-1-01 市场分析
JC-1-02 项目分析
JC-1-03 客户关系分析
JC-2-01 财务分析
JC-3-01 人力分析
JC
顾 客 满 足
经营部门
SC-1-01 商机管理
SC-1-02 投标管理
SC-1-03 合同管理
功 能
系统的作用
系统的具体功能
4
分包商入围 通过业务核算进 行收入确认
分包商定价 通过财务辅助平 台与财务对接
项目分包申请 财务系统进行记 账
功 能
系统的作用
系统的具体功能
4
分包商入围 通过业务核算进行 收入确认
分包商定价 通过财务辅助平 台与财务对接
项目分包申请 财务系统进行记 账
根据自身负责项目进行项目收 入的确认
ZN-1-05 安全管理
ZN-1-06 风险管理
ZN-1-07 项目后评估
ZN-2-01 列账管理
ZN-2-02 发票管理
ZN-2-03 资金管理
ZN-2-04 报账管理
ZN-2-05 成本管理