专业英语大全.pdf

101个热处理常用英文词汇
1. indication 缺陷
2. test specimen 试样
3. bar 棒材
4. stock 原料
5. billet 方钢，钢方坯
6. bloom 钢坯,钢锭
7. section 型材
8. steel ingot 钢锭
9. blank 坯料，半成品
10. cast steel 铸钢
11. nodular cast iron 球墨铸铁
12. ductile cast iron 球墨铸铁
13. bronze 青铜
14. brass 黄铜
15. copper 合金
16. stainless steel不锈钢
17. decarburization 脱碳
18. scale 氧化皮
19. anneal 退火
20. process anneal 进行退火
21. quenching 淬火
22. normalizing 正火
23. Charpy impact text 夏比冲击试验
24. fatigue 疲劳
25. tensile testing 拉伸试验
26. solution 固溶处理
27. aging 时效处理
28. Vickers hardness维氏硬度
29. Rockwell hardness 洛氏硬度
30. Brinell hardness 布氏硬度
31. hardness tester硬度计
32. descale 除污，除氧化皮等
33. ferrite 铁素体
34. austenite 奥氏体
35. martensite马氏体
36. cementite 渗碳体
37. iron carbide 渗碳体
38. solid solution 固溶体
39. sorbite 索氏体
40. bainite 贝氏体
41. pearlite 珠光体
42. nodular fine pearlite/ troostite屈氏体
43. black oxide coating 发黑
44. grain 晶粒
45. chromium 铬
46. cadmium 镉
47. tungsten 钨
48. molybdenum 钼
49. manganese 锰
50. vanadium 钒
51. molybdenum 钼
52. silicon 硅
53. sulfer/sulphur 硫
54. phosphor/ phosphorus 磷
55. nitrided 氮化的
56. case hardening 表面硬化，表面淬硬
57. air cooling 空冷
58. furnace cooling 炉冷
59. oil cooling 油冷
60. electrocladding /plating 电镀
61. brittleness 脆性
62. strength 强度
63. rigidity 刚性,刚度
64. creep 蠕变
65. deflection 挠度
66. elongation 延伸率
67. yield strength 屈服强度
68. elastoplasticity 弹塑性
69. metallographic structure 金相组织
70. metallographic test 金相试验
71. carbon content 含碳量
72. induction hardening 感应淬火
73. impedance matching 感应淬火
74. hardening and tempering 调质
75. crack 裂纹
76. shrinkage 缩孔，疏松
77. forging 锻（件）
78. casting 铸（件）
79. rolling 轧（件）
80. drawing 拉（件）
81. shot blasting 喷丸（处理）
82. grit blasting 喷钢砂（处理）
83. sand blasting 喷砂（处理）
84. carburizing 渗碳
85. nitriding 渗氮
86. ageing/aging 时效
87. grain size 晶粒度
88. pore 气孔
89. sonim 夹砂
90. cinder inclusion 夹渣
91. lattice晶格
92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性
93. spectrum analysis光谱分析
94. heat/thermal treatment 热处理
95. inclusion 夹杂物
96. segregation 偏析
97. picking 酸洗，酸浸
98. residual stress 残余应力
99. remaining stress 残余应力
100. relaxation of residual stress 消除残余应力
101. stress relief 应力释放
表面处理、热处理关连用语英汉对照
age hardening 时效硬化 ageing 老化处理
air hardening 气体硬化 air patenting 空气韧化
annealing 退火 anode effect 阳极效应
anodizing 阳极氧化处理 atomloy treatment 阿托木洛伊表面
austempering 奥氏体等温淬火 austenite 奥斯田体/奥氏体
bainite 贝氏体 banded structure 条纹状组织
barrel plating 滚镀 barrel tumbling 滚筒打光
blackening 染黑法 blue shortness 青熟脆性
bonderizing 磷酸盐皮膜处理 box annealing 箱型退火
box carburizing 封箱渗碳 bright electroplating 辉面电镀
bright heat treatment 光辉热处理 bypass heat treatment 旁路热处理
carbide 炭化物 carburized case depth 浸碳硬化深层
carburizing 渗碳 cementite 炭化铁
chemical plating 化学电镀 chemical vapor deposition 化学蒸镀
coarsening 结晶粒粗大化 coating 涂布被覆
cold shortness 低温脆性 comemtite 渗碳体
controlled atmosphere 大气热处理 corner effect 锐角效应
creeping discharge 蠕缓放电 decarburization 脱碳处理
decarburizing 脱碳退火 depth of hardening 硬化深层
diffusion 扩散 diffusion annealing 扩散退火
electrolytic hardening 电解淬火 embossing 压花
etching 表面蚀刻 ferrite 肥粒铁
first stage annealing 第一段退火 flame hardening 火焰硬化
flame treatment 火焰处理 full annealing 完全退火
gaseous cyaniding 气体氧化法 globular cementite 球状炭化铁
grain size 结晶粒度 granolite treatment 磷酸溶液热处理
graphitizing 石墨退火 hardenability 硬化性
hardenability curve 硬化性曲线 hardening 硬化
heat treatment 热处理 hot bath quenching 热浴淬火
hot dipping 热浸镀 induction hardening 高周波硬化
ion carbonitriding 离子渗碳氮化 ion carburizing 离子渗碳处理
ion plating 离子电镀 isothermal annealing 等温退火
liquid honing 液体喷砂法 low temperature annealing 低温退火
malleablizing 可锻化退火 martempering 麻回火处理
martensite 马氏体/硬化铁炭 metallikon 金属喷镀法
metallizing 真空涂膜 nitriding 氮化处理 nitrocarburizing 软氮化 normalizing 正常化 oil quenching 油淬化 overageing 过老化
overheating 过热 pearlite 针尖组织 phosphating 磷酸盐皮膜处理 physical vapor deposition 物理蒸镀
plasma nitriding 离子氮化 pre-annealing 预备退火
precipitation 析出 precipitation hardening 析出硬化
press quenching 加压硬化 process annealing 制程退火
quench ageing 淬火老化 quench hardening 淬火
quenching crack 淬火裂痕 quenching distortion 淬火变形
quenching stress 淬火应力 reconditioning 再调质
recrystallization 再结晶 red shortness 红热脆性
residual stress 残留应力 retained austenite 残留奥
rust prevention 防蚀 salt bath quenching 盐浴淬火
sand blast 喷砂处理 seasoning 时效处理
second stage annealing 第二段退火 secular distortion 经年变形 segregation 偏析 selective hardening 部分淬火
shot blast 喷丸处理 shot peening 珠击法
single stage nitriding 等温渗氮 sintering 烧结处理
soaking 均热处理 softening 软化退火
solution treatment 固溶化热处理 spheroidizing 球状化退火
stabilizing treatment 安定化处理 straightening annealing 矫直退火 strain ageing 应变老化 stress relieving annealing 应力消除退火 subzero treatment 生冷处理 supercooling 过冷
surface hardening 表面硬化处理 temper brittleness 回火脆性
temper colour 回火颜色 tempering 回火
tempering crack 回火裂痕 texture 咬花
thermal refining 调质处理 thermoechanical treatment 加工热处理 time quenching 时间淬火 transformation 变态
tufftride process 软氮化处理 under annealing 不完全退火
vacuum carbonitriding 真空渗碳氮化 vacuum carburizing 真空渗碳处理 vacuum hardening 真空淬火 vacuum heat treatment 真空热处理
vacuum nitriding 真空氮化 water quenching 水淬火 wetout 浸润处理
Air valves 空气阀门
Angle Stop valves 角式截止阀
Angle Throttle Valves 角式节流阀
Angle Type Globe Valves 门角式截止阀
Ash valves 排灰阀
Aspirating valves 吸（抽）气阀
Auxiliary valves 辅助（副）阀
Balance valves 平衡阀
Bellows valves 波纹管阀
Blowdown valves 泄料（放空，排污）阀
Brake valves 制动阀
Butterfly Type Non-slam Check 蝶式缓冲止回阀
Butterfly Valves with Gear Actuator 蜗轮传动蝶阀
Buttwelding valves 对焊连接阀
Clamp valves 对夹式阀门
Cock 二通
Combination valves 组合阀
CQ Thread Ball Valves CQ螺纹球阀
Culvert valves 地下管道阀
Deceleration valves 减速阀
Diaphragm Valves 隔膜阀
Decompression valves 泄压阀
Double Disc Flat Gate Valves 双闸板平板闸阀
Double Disk Parallel Gate Valves明杆平行式双闸板闸板
Double Opening Exhaust Valves 双口排气球
Drainage valves 排水阀
Electric Actuated Stop Valves 电动截止阀
Electric Actuated Wedge Gate Valves电动楔式闸阀
Electric Double Disk Parallel Gate Valves电动平行式双闸板闸板 Emergeny Cut-off Valves 紧急切断阀
Exhaust valves 排气阀
Free Float Type Steam Trap 浮球式疏水阀
Flange Ball Valves 法兰球阀
Flange Gate Valves 法兰闸阀
Flange Globe Valves 法兰截止阀
Gauge Valves 仪表阀
Hand-operated valves 手动阀
Hard Seal Butterfly Valves 金属密封碟阀
High Temperature Pressure Power Station Gate Valves 高温高压电站闸阀
High Temperature Pressure Power Station Globe Valves 高温高压电站截止阀
Hydraulic relay valves 液压继动阀
Lift Check Valves 升降式止回阀
Lift Check Valves 升降式止回阀
Limit valves 限位阀
Lining Ball Valves 衬里球阀
Lining Butterfly Valves 衬里碟阀
Lining Check Valves 衬里止回阀
Lining Cock 衬里二通
Lining Globe Valves 衬里截止阀
Lining T-Cock Valves 衬里三通旋塞阀
Liquid Indicator 液位计
LPG Pipe Fitting 液化气管件
Magnetic Co-operate Globe Valves磁耦合截止阀
Magnetism Forle Pumps 磁力泵
Manual Oil Pumps Valves 手摇油泵(阀)
Meter Needle Type Globe Valves 仪表针形截止阀 Oblique Stop Valves 直流式截止阀
Parallel Slide Valves 浆液阀
Pintle valve 针形阀
Piping Centrifugal Pumps 管道离心泵
Plunger valves 柱塞阀
Pressure valve 压力（増压）阀
Piping Pumps 管道泵
Piping Safety Valves 管道安全阀
Plunger Globe Valves 柱塞截止阀
Quick Draining Valves 快速排污阀
Restrictor Valves 过流阀(或节流阀)
Safety Valves 安全阀
Screw Pumps 螺杆泵
Scum Gate Valves 排渣闸阀
Solenoid valves 电磁阀
Single Disc Flat Gate Valves 单闸板平板闸阀
Single Opening Exhaust Valves 单口排气球
Slurry Pumps 泥浆泵
Stop Valves 截止阀
Strainer 过滤器
Submerged Motor Pumps 潜水电泵(排污泵)
Swing Check Valves 旋启式止回阀
Swing Check Valves 旋启式止回阀
Tank Lorry Ball Valves 槽车球阀
T-Cock 三通
Thin Gate Valves 薄型闸阀
Throttle Valves 节流阀
Tiny Drag Slow Shut Check Valves 微阻缓闭止回阀 Triple (tee) valves 三通阀
Two-way valves 二通阀
Under Water Pumps 液下泵
Vacuum Pumps 水力喷射器(真空泵)
Vertical Lift Check Valves 立式止回阀
Wafer Check Valves 对夹式止回阀
Wafer plate valves 对夹蝶板阀
Wafer Type Butterfly Valves with Rubber Itning对夹式衬胶蝶阀 Waste Valves 排污箱(阀)
Water Seal Gate Valves 水封闸阀
Wedge Gate Valves 楔式闸阀
Y Type and Cylinder Filters Y型筒型过滤器
阀门零部件英汉术语对照
Axis Guide 轴套
Ball 球、球芯
Ball seat 密封圈
Blowdown Sealing Face 启、阀件密封面
Body 阀体
Bonnet 阀盖
Disc 阀瓣
Mut 螺母
Screw 螺栓
Sealing 密封件
Spring 弹簧
Stem 阀杆
Stem Mut 阀杆螺母
Stem seal 填料
Wedge Disc 闸板
阀门规范技术英语术语对照
Applicable medium 适用介质
Applicable temperature 适用温度
Butt Clamp 对夹
Chemical analysis 化学成份
Connecting format 连接形式
Double disc 双闸板
Flexible disc 弹性闸板
Flange 法兰 Hoop 卡箍
Inside thread 内螺纹
Jacket 夹套
Mains 电源
Material chemical analysis and mechanical capacity材料化学成份和机械性能
materials 材料 Materials for main parts 主要零件材料
Mechanical capacity 机械性能
Max. Discharging Capacity 最大排水量
Max. Operating Temperature 最高工作温度
Max. Allowable Temperature 最高允许温度
Max. Allowable Pressure 最高允许压力
Model 型号
Name of parts 零件名称
nitrogen (N) 氮
Nominal bore 公称通径
Nominal Pressure 公称压力
Nozzle 排气口
Outside thread 外螺纹
Oxidant 氧化性介质
Parallel 平行
Piping 管路
Piston 活塞
Reductant 还原性介质
Rising stem 明杆
Seal 阀座，密封面
Seat testing pressure 压力气密封试验压力
Socket 卡套
Specifications 性能规范
Single disc 单闸板
Solid 刚性
Strengh testing pressure 强度试验压力
Steam , condensate 蒸汽,凝结水
Stroke 冲程，行程
Water,oil,steam 水,温度,气
Wedge 楔式 Welding 焊接
阀门材质术语英汉对照
Atbas metal 镍铬钢
Buna-N rubber 丁晴橡胶
Casting aluminium brass 铸铝黄铜
Casting aluminium bronze 铸铝青铜
Ceramic metal 陶瓷金属
Chromel alloy 镍铬合金
CHR rubber 氯晴橡胶
Chrominm-molybdenum-vanadium steel 铬钼钒钢 Chromium stainless steel 铬不锈钢
Chromium-molybdenum steel 铬钼钢
Corrugation pad 波形垫
Cuprum alloy 铜合金
Ductile Cast iron 球墨铸铁
Expanded graphite 柔性石墨
Fine Steel Casting iron 优质碳素钢
Fluorous rubber 氟橡胶
Gray Cast iron 灰铸铁
Hayne's alloy 钴铬钨合金
High tem perature steel 高温钢
Monel 蒙乃尔合金
Low temperature steel 低温钢
Nylon 尼龙塑料
Polytetrafluoroethylene(PTEF) 聚四氟乙烯 Polythene 聚乙烯
Pure aluminium 纯铝
Pure cupper 纯铜
Rubber graphite board 橡胶石墨板
Spring steel 弹簧钢
Stainless acid-resisting steel 不锈耐酸钢 Stainless and Graphite 不锈钢/石墨
Stainless steel 不锈钢
Steel Casting iron 碳素钢铸件
Shell Test Pressure 壳体试验压力
Service Fluid 工作介质
机械工具 spanner 扳子 (美作:wrench) double-ended spanner 双头扳子
adjustable spanner, monkey wrench 活扳子,活络扳手
box spanner 管钳子 (美作:socket wrench) calipers 卡规
pincers, tongs 夹钳 shears 剪子 hacksaw 钢锯
wire cutters 剪线钳 multipurpose pliers, universal pliers 万能手钳
adjustable pliers 可调手钳 punch 冲子 drill 钻 chuck 卡盘
scraper 三角刮刀 reamer 扩孔钻 calliper gauge 孔径规
rivet 铆钉 nut 螺母 locknut 自锁螺母,防松螺母 bolt 螺栓
pin, peg, dowel 销钉 washer 垫圈 staple U形钉
oil can 油壶 jack 工作服 grease gun 注油枪
机械加工 抛光 polishing 安装 to assemble 衬套 bushing
半机械化 semi-mechanization; semi-mechanized
半自动滚刀磨床 semi-automatic hob grinder
半自动化 semi-automation; semi-automatic 扳手 wrench
备件 spare parts 边刨床 side planer 变速箱 transmission gear
柄轴 arbor 部件 units; assembly parts 插床 slotting machine
拆卸 to disassemble 超高速内圆磨床 ultra-high-speed internal grinder
车床 lathe; turning lathe 车刀 lathe tool
车轮车床 car wheel lathe 车削 turning 车轴 axle
螺丝产品名称中英文对照
六角盖头螺帽HEX CAP NUTS
六角锯齿螺帽HEX SERRATED NUTS
六角轮缘螺帽HEX FLANGE NUTS
高脚螺帽HEX COUPLING NUTS(HIGH NUTS)
圆螺帽 ROUND NUTS
四角螺帽 SQUARE NUTS
管用螺帽 PIPE NUTS
轮壳螺帽 WHEEL NUTS
蝶型螺帽 WING NUTS
U形螺帽 U NUTS
T形螺帽 T NUTS
环首螺帽 EYE NUTS
齿形螺帽 KEP NUTS
齿花螺帽 CLINCH NUTS
耐候钢六角重型螺帽CORTEN STEEL HEA VY HEX NUTS
焊接螺帽 WELD NUTS
高张力螺帽HEIGH STRENGTH NUTS
建业用螺帽 STRUCTURAL NUTS
不锈钢螺帽STAINLESS STEEL NUTS
铜螺帽 BRASS NUTS
铝螺帽 ALUMINUM NUTS
合金钢螺帽ALLOY STEEL NUTS
重型车螺帽HEA VY DUTY WHEEL HUB NUTS
铁器焊接袋帽 ACORN CAP NUTS
金属预置扭矩式螺帽ALL-METAL PREV AILING TORQUE TYPE NUTS
壁虎螺帽 ANCHOR NUTS
大尺寸螺帽BIG SIZE NUTS
铁盖袋帽CLOSED END ACORN NUTS
盘形华司螺帽 CONICAL WASHER NUTS
铁盖+尼龙圈组合盖帽DIN 986 DOMED CAP NUTS
突缘尼龙盖帽FLANGE NYLON INSERT LOCK NUTS
平面华司螺帽 FLAT WASER NUTS
六角割沟螺帽HEX SLOTTED NUT
自锁螺帽 SELF-LOCKING NUTS
制止螺帽 SLIDING NUTS
SLN-自动防松螺帽SLN SELF-LOCKING NUTS
其它特殊螺帽 SPECIAL NUTS
弹簧螺帽 SPRING NUTS
不锈钢突缘螺帽STAINLESS STEEL FLANGE NUTS
不锈钢六角轮缘尼龙螺帽STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不锈钢六角重型螺帽STAINLESS STEEL HEA VY HEX NUTS
不锈钢六角螺帽STAINLESS STEEL HEX NUTS
不锈钢尼龙嵌入螺帽STAINLESS STEEL NYLON INSERT LOCK NUTS
鋲簩俾菝? ZINC DIE CASTING NUTS
普通六角螺帽 HEX NUTS
六角重型螺帽HEA VY HEX NUTS
薄型螺帽HEX JAM NUTS
尼龙嵌入防松螺帽NYLON INSERT LOCK NUTS
机械螺丝用六角螺帽HEX MACHINE SCREW NUT
工艺装备
1 GB/T 967-1994 螺母丝锥 Nut taps
2 GB/T 968-1994 丝锥螺纹公差 Manufacturing tolerances on the threaded portion of taps
3 GB/T 969-199
4 丝锥技术条件 Technical specification for taps
4 GB/T 970.1-1994 圆板牙 型式和尺寸 The types and dimensions for circular screwing dies
5 GB/T 970.2-1994 圆板牙 技术条件 Technical specifications for circular screwing dies
6 GB/T 970.3-1994 圆板牙架型式和互换尺寸 Die
stocks--Interchangeability dimensions
7 GB/T 971-1994 滚丝轮 Thread rolling cylindrical dies
8 GB/T 972 -1994 搓丝板 Thread rolling flat dies
9 GB/T 1008-1989 机械加工工艺装备基本术语 General terminology of machining tooling
10 GB/T 1109-1985 短莫氏锥柄立铣刀 End mills with short Morse taper shank
11 GB/T 1115-1985 圆柱形铣刀 Cylindrical cutters
12 GB/T 1117-1985 直齿三面刃铣刀 Side and face milling cutter with straight teeth
13 GB/T 1118-1985 错齿三面刃铣刀 Side and face milling cutters with double alternate helix
14 GB/T 1119-1985 尖齿槽铣刀 Flat relieved tooth slotting cutters
15 GB/T 1124.1-1996 凸凹半圆铣刀 第1部分: 凹半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters
16 GB/T 1124.2-1996 凸凹半圆铣刀 第2部分: 凸半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters
17 GB/T 1124.3-1996 凸凹半圆铣刀 技术条件 Convex and concave milling cutters technical specifications
18 GB/T 1131-1984 手用铰刀 Hand reamers
19 GB/T 1132-1984 直柄机用铰刀 Machine reamers with parallel shanks
20 GB/T 1133-1984 锥柄机用铰刀 Machine reamers with Morse taper shanks
21 GB/T 1134-1984 带刃倾角锥柄机用铰刀 Machine reamers with edge inclination Morse taper shanks
22 GB/T 1135-1984 套式机用铰刀 Shell machine reamers
23 GB/T 1139-1984 直柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with parallel shanks
24 GB/T 1140-1984 锥柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with Morse taper shanks
25 GB/T 1141-1984 锥柄扩孔钻 Core drills with Morse taper shanks
26 GB/T 1142-1984 套式扩孔钻 Shell drills
27 GB/T 1143-1984 60°、90°、120°锥柄锥面锪钻 Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive
28 GB/T 1214.1-1996 游标类卡尺 通用技术条件 The specification for callipers of vernier type
29 GB/T 1214.2-1996 游标类卡尺 游标卡尺 The vernier callipers for callipers of vernier type
30 GB/T 1214.3-1996 游标类卡尺 高度游标卡尺 The high gauge for callipers of vernier type
31 GB/T 1214.4-1996 游标类卡尺 深度游标卡尺 The depth gauge for callipers of vernier type
32 GB/T 1216-1985 外径千分尺 Micrometers
33 GB/T 1217-1986 公法线千分尺 Gear tooth micrometers
34 GB/T 1218-1987 深度千分尺 Depth micrometers
35 GB/T 1219-1985 百分表 Dial gauges
36 GB/T 1438.1-1996 锥柄麻花钻 第1部分: 莫氏锥柄麻花钻的型式和尺寸 Taper shank twist drills--Part 1: The types and dimensions for Morse taper shank twist drills
37 GB/T 1438.2-1996 锥柄麻花钻 第2部分: 莫氏锥柄长麻花钻的型式和尺寸 Taper shank twist drills--Part 2: The types and dimensions for long Morse taper shank drills
38 GB/T 1438.3-1996 锥柄麻花钻 第3部分: 莫氏锥柄加长麻花钻的型式和尺寸 Taper shank twist drills--Part 3: The types and dimensions for lengthened morse taper shank twist drills
39 GB/T 1438.4-1996 锥柄麻花钻 第4部分: 莫氏锥柄超长麻花钻的型式和尺寸 Taper shank twist drills--Part 4: The types and dimensions for extra-long Morse taper shank twist drills
40 GB/T 1442-1985 直柄工具用传动扁尾及套筒的尺寸和公差 Driving tenons and sockets for parallel shank tools-- Dimensions and tolerances
41 GB/T 1443-1996 机床和工具柄用自夹圆锥 Machine tools--Self-holding tapers for tool shanks
42 GB/T 1483-1989 螺口式灯头的量规 Gauges of edison screw lamp caps
43 GB/T 1484-1979 插口式灯头的量规 Gauges for bayonet lamp caps
44 GB/T 1581-1979 米制锥螺纹量规 Gauges for tapered screw thread,metric series
45 GB/T 1957-1980 光滑极限量规 Limit gauges for plain workpiece
46 GB/T 2476-1994 普通磨料 代号 Symbols of abrasive materials
47 GB/T 2478-1996 普通磨料 棕刚玉 Conventional abrasive--Brown fused
alumina
48 GB/T 2479-1996 普通磨料 白刚玉 Conventional abrasive White fused alumina
49 GB/T 2480-1996 普通磨料 碳化硅 Conventional abrasive Wilicon carbide
50 GB/T 2483-1983 磨料标志和包装规定 Marking and packing
51 GB/T 2484-1994 普通磨具代号和标记 Symbols and designation for bonded abrasive products
52 GB/T 2487-1984 油石Oil stones and sticks
53 GB/T 2488-1984 砂瓦Segments of grinding wheels
54 GB/T 2489-1984 薄片砂轮 Thin grinding wheels
55 GB/T 2492-1984 砂轮静平衡检验方法及不平衡数值 Static balance testing for grinding wheels and unbalance value
56 GB/T 2493-1995 砂轮的回转试验方法Rotation test of grinding wheel strength
57 GB 2494-1995 磨具安全规则Safety rules for bonded abrasives
58 GB/T 2495-1996 普通磨具包装Packing for bonded abrasive products
59 GB/T 2804-1981 组合夹具元件结构要素 Modular parts of fixture construction--General features, profiles and dimensions
60 GB/T 2851.1-1990 冲模滑动导向模架对角导柱模架 Sliding guide die sets for press tools—Diagonal pillar sets
61 GB/T 2851.3-1990 冲模滑动导向模架后侧导柱模架 Sliding guide die sets for press tools—Back pillar sets
62 GB/T 2851.4-1990 冲模滑动导向模架后侧导柱窄形模架 Sliding guide die sets for press tools—Back pillar sets (narrow)
63 GB/T 2851.5-1990 冲模滑动导向模架中间导柱模架 Sliding guide die seta for press tools—Center pillar sets
64 GB/T 2851.6-1990 冲模滑动导向模架中间导柱圆形模架 Sliding guide die sets for press tools—Center pillar sets (round)
65 GB/T 2851.7-1990 冲模滑动导向模架四导柱模架 Sliding guide die sets for press tools—Four pillar die sets
66 GB/T 2852.1-1990 冲模滚动导向模架对角导柱模架 Ball slide die sets for press tools—Diagonal pillar sets
67 GB/T 2852.2-1990 冲模滚动导向模架中间导柱模架 Ball slide die sets for press tools—Center pillar sets
68 GB/T 2852.3-1990 冲模滚动导向模架四导柱模架Ball slide die sets for press tools—Four pillar die sets
69 GB/T 2852.4-1990 冲模滚动导向模架后侧导柱模架 Ball slide die sets for press tools—Back pillar die sets
70 GB/T 2855.1-1990 冲模滑动导向模座对角导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for diagonal pillar sets
71 GB/T 2855.2-1990 冲模滑动导向模座对角导柱下模座 Holder for sliding guide die sets for press tools—Die holder for diagonal pillar sets
72 GB/T 2855.5-1990 冲模滑动导向模座后侧导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for back pillar sets
73 GB/T 2855.6-1990 冲模滑动导向模座后侧导柱下模座 Holder for ball slide die sets for press tools—Die holder for back pillar sets
74 GB/T 2855.7-1990 冲模滑动导向模座后侧导柱窄形上模座 Holder for sliding guide die sets for press tools—Punch holder for back pillar sets (narrow)
75 GB/T 2855.8-1990 冲模滑动导向模座后侧导柱窄形下模座 Holder for sliding guide die sets for press tools—Die holder for back pillar sets (narrow)
76 GB/T 2855.9-1990 冲模滑动导向模座中间导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for center pillar sets
77 GB/T 2855.10-1990 冲模滑动导向模座中间导柱下模座Holder for ball slide die sets for press tools—Die holder for center pillar sets
78 GB/T 2855.11-1990 冲模滑动导向模座中间导柱圆形上模座Holder for sliding guide die sets for press tools—Punch holder for center pollar sets (round)
79 GB/T 2855.12-1990 冲模滑动导向模座中间导柱圆形下模座Holder for sliding guide die sets for press tools—Die holder for center pillar sets (round)
80 GB/T 2855.13-1990 冲模滑动导向模座四导柱上模座Holder for sliding guide die sets for press tools—Punch holder for four pillar sets
81 GB/T 2855.14-1990 冲模滑动导向模座四导柱下模座 Holder for ball slide die sets for press tools—Die holder for four pillar sets
82 GB/T 2856.1-1990 冲模滚动导向模座对角导柱上模座 Holder for ball slide die sets for press tools—Punch holder for diagonal pillar sets
83 GB/T 2856.2-1990 冲模滚动导向模座对角导柱下模座 Holder for ball slide die sets for press tools—Die holder for diagonal pillar sets
84 GB/T 2856.3-1990 冲模滚动导向模座中间导柱上模座 Holder for ball silde die sets for press tools—Punch holder for center pillar sets
85 GB/T 2856.4-1990 冲模滚动导向模座中间导柱下模座 Holder for ball slide die sets for press tools—Die holder for center pillar sets
86 GB/T 2856.5-1990 冲模滚动导向模座四导柱上模座Holder for ball slide die sets for press tools—Punch holder for four pillar sets
87 GB/T 2856.6-1990 冲模滚动导向模座四导柱下模座Holder for ball slide die sets for press tools—Die holder for four pillar sets
88 GB/T 2856.7-1990 冲模滚动导向模座后侧导柱上模座 Holder for ball silde die sets for press tools—Punch holder for back pillar sets
89 GB/T 2856.8-1990 冲模滚动导向模座后侧导柱下模座 Holder for ball slide die sets for press tools—Die holder for back pillar sets
90 GB/T 2861.1-1990 冲模导向装置A型导柱Guide unit for press tools—Guide pillars, types A
91 GB/T 2861.2-1990 冲模导向装置B型导柱Guide unit for press tools—Guide pillars, type
B
92 GB/T 2861.3-1990 冲模导向装置C型导柱Guide unit for press tools—Guide pillars, type
C
93 GB/T 2861.4-1981 冷冲模导向装置A型小导柱Guide unit of cold press dies--Small guide pillars, type A
94 GB/T 2861.5-1981 冷冲模导向装置B型小导柱Guide unit of cold press dies--Small guide pillars, type B
95 GB/T 2861.6-1990 冲模导向装置A型导套Guide unit for press tools—Guide bushes, type
A
96 GB/T 2861.7-1990 冲模导向装置B型导套Guide unit for press tools—Guide bushes, type
B
97 GB/T 2861.8-1990 冲模导向装置C型导套Guide unit for press tools—Guide bushes, type
C
98 GB/T 2861.9-1981 冷冲模导向装置小导套 Guide unit of cold press dies--Small guide bushing
99 GB/T 2861.10-1990 冲模导向装置钢球保持圈Guide unit for press tools—Cage
100 GB/T 2861.11-1990 冲模导向装置圆柱螺旋压缩弹簧 Guide unit for press tools—Cylindrical coil compression spring
101 GB/T 2861.12-1990 冲模导向装置 A型可卸导柱 Guide unit for press tools—Guide pillar with taper lead, type A
102 GB/T 2861.13-1990 冲模导向装置 B型可卸导柱 Guide unit fir press tools—Guide pillar with taper lead, type B
103 GB/T 2861.14-1990 冲模导向装置 衬套 Guide unit for press tools—Bushing
104 GB/T 2861.15-1990 冲模导向装置 垫圈 Guide unit for press tools—Washer
105 GB/T 2861.16-1990 冲模导向装置 压板 Guide unit for press tools—Clampr
106 GB/T 2861.17-1981 冷冲模导向装置 可卸导柱模座安装尺寸 Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars
107 GB/T 2861.18-1981 冷冲模导向装置 压圈固定导柱 Guide unit of cold press dies--Guide pillars with ring fixed
108 GB/T 2861.19-1981 冷冲模导向装置 压圈固定导套 Guide unit of cold press dies--Guide bushing with ring fixed
109 GB/T 2861.20-1981 冷冲模导向装置 压圈 Guide unit of cold press dies--Clamping ring
110 GB/T 3043-1989 棕刚玉 化学分析方法 Chemical analysis methods for brown fused alumina
111 GB/T 3044-1989 白刚玉、铬刚玉 化学分析方法 Chemical analysis methods for white fused alumina and pink fused alumina
112 GB/T 3045-1989 碳化硅 化学分析方法 Chemical analysis methods for silicon carbide
113 GB/T 3227-1988 机动套筒扳手的传动四方 Driving squares for power socket wrenches
114 GB/T 3228-1988 机动套筒扳手的四方传动套筒 Square drive sockets for power socket wrenches
115 GB/T 3229-1988 机动工具的六角传动端 Hexagon drive ends for power tools
116 GB/T 3390.1-1989 手动套筒扳手套筒 Hand operated square drive socket
117 GB/T 3390.2-1989 手动套筒扳手传动方榫和方孔 Driving square for hand operated socket wrenches
118 GB/T 3390.3-1989 手动套筒扳手传动附件 Drivings parts for hand operated square drive socket wrenches
119 GB/T 3390.4-1989 手动套筒扳手连接附件 Conjoining parts for hand operated square drive socket wrenches
120 GB/T 3390.5-1989 手动套筒扳手检验规则、包装与标志 Inspection, packaging and marking for hand operated socket wrenches
121 GB/T 3464.1-1994 机用和手用丝锥 Machine and hand taps
122 GB/T 3464.2-1994 长柄机用丝锥 Long shank machine taps
123 GB/T 3464.3-1994 短柄机用和手用丝锥 Short shank machine and hand taps
124 GB/T 3466-1983 长柄螺母丝锥 Long shank nut taps
125 GB/T 3506-1993 螺旋槽丝锥 Machine taps with helical flutes
126 GB/T 4169.1-1984 塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins
127 GB/T 4169.2-1984 塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes
128 GB/T 4169.3-1984 塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head
129 GB/T 4169.4-1984 塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head
130 GB/T 4169.5-1984 塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder
131 GB/T 4169.6-1984 塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks
132 GB/T 4169.7-1984 塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates
133 GB/T 4169.8-1984 塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates
134 GB/T 4169.9-1984 塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins
135 GB/T 4169.10-1984 塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars
136 GB/T 4169.11-1984 塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements
137 GB/T 4170-1984 塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion
138 GB/T 4211-1984 高速钢车刀条 High speed steel tool bits
139 GB/T 4243-1984 锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks
140 GB/T 4244-1984 带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks
141 GB/T 4245-1984 机用铰刀技术条件 Machine reamers--Technical requirements
142 GB/T 4246-1984 铰刀专用公差 Special tolerance for reamers
143 GB/T 4247-1984 锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks
144 GB/T 4248-1984 手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements
145 GB/T 4250-1984 圆锥铰刀技术条件 Taper reamers--Technical requirements
146 GB/T 4251-1984 硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips
147 GB/T 4252-1984 硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips
148 GB/T 4253-1984 硬质合金铰刀技术条件 Reamers with carbide
tips--Technical requirements
149 GB/T 4255-1984 套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills
150 GB/T 4256-1984 直柄扩孔钻 Core drills with parallel
内燃机系
J 机械 活塞式内燃机与其他动力设备
1 GB/T 725-1991 内燃机产品名称和型号编制规则 Internal combustion engines—Nomenclature and code of designations
2 GB/T 726-1994 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine
3 GB/T 727-1985 涡轮增压器产品命名和型号编制方法 Denomination for turbochargers and code of identification symbols
4 GB/T 1105.1-1987 内燃机台架性能试验方法 标准环境状况及功率、燃油消耗和机油消耗的标定 Performance test methods for reciprocating internal combustion engine--Standard ambient conditions and declarations of power, fuel consumption and lubricating oil consumption
5 GB/T 1105.2-1987 内燃机台架性能试验方法 试验方法 Performance test methods for reciprocating internal combustion engine--Test methods
6 GB/T 1105.3-198
7 内燃机台架性能试验方法 测量技术 Performance test methods for reciprocating internal combustion engine--Measurement techniques
7 GB/T 1147-1987 内燃机通用技术条件 Reciprocating internal combustion engines--General technical specifications
8 GB/T 1148-1993 内燃机铝活塞技术条件 Aluminium piston--Reciprocating internal combustion engines--Technical specifications
9 GB/T 1149.1-1994 内燃机活塞环 通用规则 Internal combustion
engines--Piston rings--General specifications
10 GB/T 1149.2-1994 内燃机活塞环 术语 Internal combustion
engines--Piston rings-Vocabulary
11 GB/T 1149.3-1992 内燃机活塞环 刮环 Internal combustion
engines-Piston rings-Scraper rings
12 GB/T 1149.4-1994 内燃机活塞环 技术要求 Internal combustion
engines--Piston rings--Quality requirements
13 GB/T 1149.5-1992 内燃机活塞环 油环 Internal combustion
engines-Piston rings-Oil control rings
14 GB/T 1149.6-1994 内燃机活塞环 检验方法 Internal combustion
engines--Piston rings--Inspection measuring principles
15 GB/T 1149.7-1994 内燃机活塞环 螺旋撑簧油环 Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings
16 GB/T 1150-1993 内燃机湿式铸铁气缸套技术条件 Internal combustion engines--Cast iron wet type cylinder liners--Specification
17 GB/T 1151-1993 内燃机主轴瓦及连杆轴瓦技术条件 Internal combustion engines--Main and connecting rod bearings--Specification
18 GB 1576-1996 低压锅炉水质 Water quality for low pressure boilers
19 GB/T 1859-1989 内燃机噪声声功率级的测定 准工程法 Determination of sound power levels of internal combustion engines
noise—Quasi-engineering method
20 GB/T 1883-1989 往复活塞式内燃机 术语 Reciprocating internal combustion engines—Terminology
21 GB/T 1921-1988 工业蒸汽锅炉 参数系列 Specifications for industrial steam boiler
22 GB/T 2785-1988 内燃机气门弹簧技术条件 Internal combustion
engine--Technical requirements for valve springs
23 GB/T 2940-1982 柴油机用喷油泵、调速器、喷油器弹簧技术条件 Technical specifications of springs for fuel pump, governor and injecter of diesel engines
24 GB/T 3166-1988 热水锅炉 参数系列 Specifications series of hot water boiler
25 GB/T 3821-1983 中小功率内燃机清洁度测定方法 Determination of cleanliness for small and medium power internal combustion engines 26 GB/T 4556-1984 往复式内燃机防火 Reciprocating internal combustion engines--Fire protection
27 GB/T 4672-1984 往复式内燃机手操纵机构动作方向 Reciprocating internal combustion engines--Hand operated control devices--Standard direction of motion
28 GB/T 4759-1995 内燃机排气消声器测量方法 Measurement procedure for exhaust silencers of internal combustion engines
29 GB/T 5264-1985 柴油机喷油泵柱塞偶件技术条件 Technical specification。