手持式直读红外光谱仪快速测定在用润滑油总酸值和总碱值的方法

手持式直读红外光谱仪快速测定在用润滑油总酸值和总碱值的
方法
杨琨;吴桐;邹毛;石立杰
【期刊名称】《光谱学与光谱分析》
【年(卷),期】2017(37)2
【摘要】TAN and TBN which provide information about the degree of lubricating oil oxidation and the properties of alkali reserve is usually used in measurement of aging degree of lubricant,and its value can dete rmine whether the amount of certain acid additives added is enough.It can avoid the problems such as,the abnormal wearing,corruption,deposit,filter blockin g.The TAN and TBN of Lubricating oil is measured by the standard based on acid-base titration,in which potentiometric titration is used more.However it has to face the problems of complicated
operation,expensive consuming material,an d large quantity of sample oil,well trained operator and difficulty in handling reagent.Due to the oxidation of lubricating oil products and alkaline additive s in the infrared spectrum has strong structural information,therefore,the TAN and TBN of lubricating oil can be monitored by infrared spectra.The quantification of TAN and TBN based on neutralization reaction was built up through the measurement of portable infrared spectroscopy.The reliable quantif ication of TAN and TBN can be archived by three procedures of lubricant type cla ssification,building up lubricant library and multi-parameters regression.Thi
s method is supported by recent ASTM D7889 pared with the other sta ndard,this method has a high speed of analysis,and it can read out measurement result directly without any solvent.The accuracy of measurement is relatively high,operation is relatively simple,and improve the detection speed at a certa in degree.The method can be used widely in industry field,including in laborat ory offline measurement and in situ online measurement.%总酸值(TAN)和总碱值(TBN)能提供关于润滑油氧化程度和碱储备性能方面的信息,其值大小可以判断某些酸性添加剂的加量是否足够,常用于设备润滑油的老化度测量,以避免设备出现异常磨损、腐蚀、沉淀、堵塞过滤器等问题.润滑油的总酸性和总碱性的检测标准都以酸碱滴定为基础,多采用电位滴定法.然而,这种方法需要复杂的操作、昂贵的耗材、大量的油样、熟练的操作人员以及危险试剂的处理问题.由于润滑油的氧化产物和碱性添加剂在红外光谱中都有较强的信息,因此,可以通过红外光谱图研究对润滑油总酸值和总碱值的监测.建立了一种基于酸碱中和反应的定量中红外光谱总酸值和总碱值的手持式直读红外光谱方法,通过油品归类、建立油样库和多元回归三个步骤,可获得准确可靠的量化总酸值和总碱值.此方法获得最新的ASTM D7889标准支持,相比于其他方法,这种方法具有分析速度快、无需任何溶剂、直接得到检测结果并且结果准确,操作相对简单,并一定程度提高了检测速度.可广泛应用于离线实验室和现场在线油液检测.
【总页数】4页(P452-455)
【作者】杨琨;吴桐;邹毛;石立杰
【作者单位】武汉理工大学能源与动力工程学院,可靠性工程研究所,湖北武汉430063;武汉理工大学国家水运安全工程技术研究中心,湖北武汉 430063;武汉理工大学能源与动力工程学院,可靠性工程研究所,湖北武汉 430063;武汉理工大学能
源与动力工程学院,可靠性工程研究所,湖北武汉 430063;斯派超科技(北京)有限公司,北京 100176
【正文语种】中文
【中图分类】O657.3
【相关文献】
1.FTIR测定在用润滑油碱值的快速方法 [J], 化岩;廖梓裙;杨长江;梅林;梁俊
2.润滑剂抗氧剂、总酸值和总碱值的快速测定 [J], 史永刚;冯新泸;李子存
3.红外光谱结合化学计量学方法快速测定在用航空润滑油的酸值 [J], 王菊香;邢志娜;申刚
4.润滑油总酸值测定新方法——温度滴定法 [J], 胡海豹;汪涵;李洪燕;龚雁
5.矿物型润滑油总酸值测定新方法（电位法）探讨 [J], 沈娟
因版权原因，仅展示原文概要，查看原文内容请购买。