Bongshin CBFS-100kg

合集下载

杰尼奥电子有限公司 - 泵类产品说明书

Metering pumpsTHE COMPANYDoseuro is a combination of two capabilities: the first is a solid technical knowledge, obtained during a multi-year experience in the dosing field, while the second is a commercial understanding of the changes in this field and sensitivity to our customers’ requirements. These two factors aresupported by a strong company structure that meets our customers’ demands.The continuous research and principal effort directed to the customer satisfaction are the fundamental reasons of Doseuro success, whichEach of our products speaks for itself. Highreliability is achieved by constant productdevelopment, updating production techniques,everlasting quality control and rigorous testing at allstages of production.WATER ANDEFFLUENT TREATMENTPHARMACEUTICALSAND TEXTILESHORTICULTURALAPPLICATIONS CHEMICALS ANDDYESTUFFS TANNINGPAPER INDUSTRY FOOD PRODUCTION*T h e W o r l d O v e rMAIN FEATURESAll Doseuro pumps are fitted as standard with top quality 4 pole electric motors that conform to the UNEL-MEC specifications, and range from 0.09-4.0 kW at European standard 3 phase voltages of 230/400V @ 50Hz. Non standard motors are available to many alternative specifications, including different voltages and frequencies, insulation standards, and special explosion-proof versions.The dosing rate is fully adjustable via a manually controlled eccentric cam mechanism with spring return, or positive return according to API standard 675.Automatic adjustment is available by means of servo-control motors, pneumatic control or motor frequency control, interface PROFIBUS or other BUS, if required. The reduction system, made of an endless screw coupled to a worm-wheel, makes thegearbox very strong.Our pumps are complemented by a wide range of accessories which include, foot valve/strainers, pressure relief and loading valves, injection fittings and pulsation dampeners.Special versions of construction are available to suit our clients specific applications.A VIEW OVER THE PRODUCTION RANGE Doseuro chemical dosing pumps are available in three main versions. Plunger pumps with packed plungers, plunger/hydraulic diaphragms or mechanical diaphragms. High pressure pumps are available too, upon request. The range also includes various driving methods, such as electric motor or electromagnetic solenoid operation. The company also manufactures complete dosing packages, electric mixers, and fully automatic plants for the dissolution and mixing of polyelectrolyte, both aspowder and emulsion.The most common fields of application for Doseuro chemical dosing pumps are listed in the pictures below.RUBBER AND PLASTICSOIL AND GASIRON, STEEL, COAL AND CONSTRUCTIONNAVAL AND CIVILIAN MARINEAND WHEREVER THERE IS A FLUIDMANY ENGINEERING PROJECTS* available for selected productsPositive Displacement Plunger Dosing PumpAI series plunger dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Mechanism is an internal worm gear, fully oil bath lubricated with possibility to be coupled with others independently from the size and stroke number to obtain multi-heads unit.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated capacity.As plunger pumps they are reliable and easy for maintenance and with the possibility to have flushing or leakage recovery system (optional).Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg A I 17538550 A I 250126540 A I 350356940 AP A I 17544230 AP A I 250160230 AP A I 350477250 Note: higher pressure are availablePositive Displacement Sandwich Hydraulic Diaphragm Dosing pumpSDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards.Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Mechanism is an internal worm gear, fully oil bath lubricated with possibility to be coupled with others independently from the size and stroke number to obtain multi-heads unit.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated capacity.A built-in safety valve is installed in the hydraulic circuit, in order to protect the diaphragm against over pressure. The peculiarity of this pump is the special sandwich diaphragm and the reliability of the diaphragm rupture detection system.Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg SD I 17539014 SD I 250126414 SD I 350402814 AP SD I 17523140 AP SD I 25071180 AP SD I 350149656 Note: higher pressure are availableSpring Return Plunger Dosing PumpA Plunger metering pumps are normally used when:– The dosed liquid is non abrasive solution– A drip proof system is not essential– High pressure is requiredEach pump is fitted with a standard gearbox reduction system with a vertical mounted motor.The reduction gearbox is of a standard endless screw plus worm-wheel type, supported by bearing, fully lubricated in oil bath.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic.As plunger pumps they are reliable and easy for maintenance and with the possibility to have flushing or leakage recovery system (optional).Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg A125N15620 A175N40820 A250N104220 A350N14584 AP A125N15.6230 AP A175N28.6230 AP A250N57.4230Spring Return Mechanical Diaphragm Dosing PumpD mechanical diaphragm metering pumps are normally used when:– The dosed liquid contains small amounts of suspended solids– A drip proof/air tight application is required– The dosed liquid is a toxic solutionEach pump is fitted with a standard gearbox reduction system with a vertical mounted motor. The reduction gearbox is of a standard endless screw plus worm-wheel type, supported by bearing, fully lubricated in oil bath.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic.As mechanical diaphragm they are easy for maintenance.Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg D050N4914 D100N4385 D101N4188 D121N5703 D122N14006Spring Return Hydraulic Diaphragm Dosing PumpB & BR Hydraulic diaphragm metering pumps are normally used when:– The dosed liquid contains small amounts of suspended solids– A drip proof/air tight application is required– The dosed liquid is a toxic solution– High pressure is requiredEach pump is fitted with a standard gearbox reduction system with a vertical mounted motor. The reduction gearbox is of a standard endless screw plus worm-wheel type, supported by bearing, fully lubricated in oil bath.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic.BR version is equipped with built-in safety valve is installed in the hydraulic circuit, in order to protect the diaphragm against over pressure.Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg B & BR 125N10820 / 13.5 B & BR 175N41820 / 14 B & BR 250N106811 / 7.2 AP B & BR 125N6060 / 40 AP B & BR 175N24760 / 40 AP B & BR 250N55623 / 20.7Spring Return Sandwich Hydraulic Diaphragm Dosing PumpSD Sandwich Hydraulic diaphragm metering pumps are normally used when:– The dosed liquid contains small amounts of suspended solids– No leakage are accepted– The dosed liquid is a toxic solution– High pressure is requiredEach pump is fitted with a standard gearbox reduction system with a vertical mounted motor. The reduction gearbox is of a standard endless screw plus worm-wheel type, supported by bearing, fully lubricated in oil bath.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic.A built-in safety valve is installed in the hydraulic circuit, in order to protect the diaphragm against over pressure. The peculiarity of this pump is the special sandwich diaphragm and the reliability of the diaphragm rupture detection system.Furthermore they comply with ATEX standard, therefore they can be installed in Hazardous area. Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg SD 125N10813.5 SD 175N41814 SD 250N10687.2 AP SD 125N6040 AP SD 175N24740 AP SD 250N55620.7Spring Return Mechanical Diaphragm Dosing PumpFM mechanical diaphragm metering pumps are normally used when:– The dosed liquid contains small amounts of suspended solids– A drip proof/air tight application is required– The dosed liquid is a toxic solutionEach pump is fitted with a standard gearbox reduction system with a vertical mounted motor. The reduction gearbox is of a standard endless screw plus worm-wheel type, supported by bearing.Stroke adjustment can be carried with the pump at rest or in operation and it can be manual. As mechanical diaphragm they are easy for maintenance.Peculiarity of this model is the complete plastic casing suitable for ACID environment.Wide choice of wetted materials: S.S.316L; PVC; PP; PVDF; PTFE other materials available upon request.Fittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg FM 050N-301410 FM 050N-50475Solenoid Dosing PumpsThe SDP family provide an alternative solution in lower rates application field where end users look forward reliable results and simple operation.Using a built-in microprocessor, with its own flexibility, makes the SDP series extremely complete and suitable for a wide range of applications, thanks to several functions included in the same pump, even with few models.Common features for every model:– Foot mounted dosing pump– Corrosion-proof reinforced polypropylene housing– Solid PTFE diaphragm– Water-resistant IP65 protection– Wide choice of wetted materials: PP; PVC; PTFE; PVDF– Standard power supply: 230V 50/60 HzOn request: 24V d.c., 12V d.c., 24V a.c.,110V 50/60 HzAll chemical dosing pumps are complete of accessories to improve theoperation and accuracy of the chemical dosing pump:– Injection valve– 1.5 mt suction pipe; 1.5 mt delivery pipe– StrainerFittings– Polyethylene tanks– Relief valves and back pressure valves– Safety relief valve– Injection valve– Foot valve– Pulsation dampeners– Calibration pot ModelMax Capacityin Lt/hMax pressurein Barg S - - 2020Automatic plants for dissolution and preparation of powder/emulsion polyelectrolytesThese plants produce from 300 to 5000 lt/h of fully polyelectrolyte solution at constant solution strength from powder /emulsion stock. Their compact design in Stainless steel AISI 304 or High Density PolyPropylene includes all necessary controls for water make up and polymer feed and incorporates the following equipment and features:– Dissolution, diluition and ageing tanks.– Polymer and water feed rate controls.– All mixers.– Control panel, fitted and fully interwired.– Polyelectrolyte chemical dosing pumps.The Powder dilution plant is fitted with a stocking hopper and a volumetricendless screw, while the Emulsion dilution plant works thanks to aPlunger metering pump, dosing the Emulsion into a static mixer.Model Version Max Capacity in Lt/h HA Powder5000 HE Emulsion5000 Note: higher capacity are availableDEM DMT DRCDRV Electric mixers for chemical mixing Type DMT and type DMMHigh speed mixers directly coupled to the motor, for small tanks up to 1000 litres capacity, with polypropylene coated shaft and propeller.Type DEMHigh speed mixers, directly coupled to the motor, supported by a protection lantern, housing an extra bearing kit, for increased shaft stability, and an extra seals kit, for increased protection from the mixed chemical.Type DRVSlow speed mixers for light applications, with close coupled worm wheel/endless screw reduction gear box.Type DRCHeavy duty slow speed mixers with co-axial reducer, outrigger bearings and protective seals.ModelVersion ServiceDMTFast mixer ≤ 1000Lt tank liquid ≤ 250cps DMM Fast mixer ≤ 1000Lt tank liquid ≤ 250cps DEMFast mixer ≤ 3000Lt tank liquid ≤ 1000cps DRV Slow mixer ≤ 7000Lt tank liquid ≤ 2500cps DRC Slow mixer≤ 40000Lt tank liquid ≤ 5000cpsPolyethylene tanksSuitable to be fitted with metering pump on its topRelief valves and back pressure valvesSafety relief valvePulsation dampener Type: HSTXBody in S.S.316, composed by two parts assembled together by means of a special hosing that, under dynamic pressures, tends to close itself.Various diaphragm materials available, for wide chemical compatibility. Built accordingly to the ASME VIII° Div. 1 rules.Pulsation dampenerType: HSTPVCBody in PVC, composed by two parts assembled together by means of a special hosing that, under dynamic pressures, tends to close itself.Maximum temperature: + 50 °C. Various diaphragm materials available, for wide chemical compatibility.FILTERSBACK PRESSUREVALVESPULSATION DAMPENERSCert. n° 5942。

赛德凯斯电子KW系列匀胶机配件选型手册说明书

北京赛德凯斯电子有限责任公司KW系列匀胶机配件选型手册2014.11V1版SC-5-7(5mm-7mm)----------------------------------------1 SC-8-10(8mm-10mm)--------------------------------------2 SC-11-13(11mm-13mm)-----------------------------------3 SC-14-18(14mm-18mm)-----------------------------------4 SC-19-23(19mm-23mm)-----------------------------------5 SC-24-28(24mm-28mm一寸片托)-------------------------6 SC-29-33(29mm-33mm)-----------------------------------7 SC-34-38(34mm-38mm)-----------------------------------8 SC-39-43(39mm-43mm)-----------------------------------9 SC-44-48(44mm-48mm)----------------------------------10 SC-49-53(49mm-53mm二寸片托)------------------------11 SC-54-58(54mm-58mm)----------------------------------12 SC-59-63(59mm-63mm)----------------------------------13 SC-64-68(64mm-68mm)----------------------------------14 SC-70-74(70mm-74mm)----------------------------------15 SC-75-79(75mm-79mm三寸片托)------------------------16 SC-80-84(80mm-84mm)----------------------------------17 SC-85-89(85mm-89mm)----------------------------------18 SC-97-101(97mm-101mm四寸片托)----------------------19 SCS-9-13(9mm-13mm)------------------------------------20 SCS-14-18(14mm-18mm盖玻片)--------------------------21 SCS-19-23(19mm-23mm)----------------------------------22 SC-24-28-75-79(载玻片)------------------------------------23 SCL-5-44----------------------------------------------------24 SCH-44-68--------------------------------------------------25 SCH-70-84--------------------------------------------------26 SCH-80------------------------------------------------------27圆片直径：80-84mm 选择片托示意说明KW系列匀胶机配件内部编号i c s C o ., L t d适用于：方片边长范围85-89mm 圆片直径：85-89mm选择片托示意说明KW系列匀胶机配件内部编号n i c s C o ., L t dtL,.oCscino圆片直径：97mm-101mm标准4寸圆片片托选择片托示意说明KW系列匀胶机配件内部编号SC-97-101第 19 頁，共 27 頁适用于：方片边长范围19-23mmSCS-19-23选择片托示意说明KW系列匀胶机配件内部编号北京赛德凯斯电子有限责任公司第 22 頁，共 27 頁适用于：用于客户定制边长或直径44mm-68mm之间片子SCH-44-68选择片托示意说明KW系列匀胶机配件内部编号第 25 頁，共 27 頁SCH-70-84适用于：客户定制边长或直径范围：70-84mm选择片托示意说明KW系列匀胶机配件内部编号第 26 頁，共 27 頁适用于：用于客户定制边长或直径大于80mm以上片子SCH-80选择片托示意说明KW系列匀胶机配件内部编号第 27 頁，共 27 頁。

派克精密流体微型泵说明书

您与运动和控制技术领域的先行者合作，就是希望促进您的业务发展和全球的发展。

从微型电磁阀到高集成型自动化系统，我们的产品对于用于药物研发和病原体检测的救生医疗设备和科学仪器至关重要。

并且对于缩短上市时间和降低总体拥有成本也十分关键。

因此，请与派克合作，准备改变这一切吧！/precisionﬂuidics 1 603 595-1500目录页T2-05Helix124高效和紧凑型 13.5mm 宽泵 – 高达 800 mLPM高压泵 – 超过5.5 LPM 和高达100 PSI 的压力T2-0320高性能与尺寸比率泵 – 高达2.5 LPMLTC 系列76液体系列传送泵 – 高达 650 mLPMEZ 底座92振动隔离安装系统小型活塞泵（空气）微型泵（空气/气体）微型泵（液体）T2-0494超紧凑型、高效泵 – 高达 7.5LPMBTC-IIS 系列62应用广泛的多功能双头泵系列产品 – 高达 11 LPMBTC 系列52应用广泛的多功能泵系列产品 – 高达6 LPMLTC-IIS 系列84液体系列双头传送泵 – 高达1.5 LPMCTS 系列BTX-Connect 2836高性能紧凑型 20 mm 宽泵 – 高达 2.5 LPM多功能双头和单头泵系列，适合多种应用-高达10 LPMTTC 系列74紧凑、高效、低压泵 – 高达 6 LPMTTC-IIS 系列84紧凑、高效、低压双头泵 - 高达 11 LPM附件4Helix 微型高压泵高达100 PSI (6.9 bar)压力Parker Helix 是一款紧凑型高压泵，旨在实现小型即时临床护理仪器。

Helix 可在挑战性的高海拔环境和无法使用外部压缩空气的应用中实现高压操作。

Helix 泵可提供5.5 LPM 以上的流量和高达100 PSI (6.9 bar)的压力，为性能至关重要且空间有限的台式诊断设备提供了出色的解决方案。

• 集成了用于卸荷的X 阀，可实现高压重启• 内部飞轮可在高压下低速运行• 无油活塞• 简单的安装特性• 带有推入式接头的快速流体连接• 符合RoHS 指令和REACH 标准产品特性• 液上空气• 气动驱动•微流控芯片• 即时临床护理检验• 分子诊断• 核酸纯化•基因组学典型应用典型市场产品规格物理特性电子5微型隔Helix 微型高压泵典型流量曲线• 曲线展示了0.080"偏移泵的流量性能• 使用5.0 Vdc 控制输入时，泵将以大约4400 RPM 的转速和高达8.5 LPM的流量的状态运行，但不建议连续工作。

诺基亚电动自行车 Electropak 技术数据说明书

Technical DataBasic technical dataNumber of cylinders.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...6 Cylinder arrangement... ... ... ... ... ... ... ... ... ... ... ...vertical in-line Cycle. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .4 stroke Induction system... ... ... ... turbocharged, air-to-air charge cooling Combustion system.. ... ... ... ... ... ... ... ... ... direct injection diesel Compression ratio. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...16,3:1Bore.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 130 mm Stroke ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 157 mm Cubic capacity .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..12,5 litres Direction of rotation... ... anticlockwise when viewed from flywheel Firing order (number 1 cylinder furthest from flywheel)1-5-3-6-2-4Estimated total weight of Electropak (dry) ... ... ... ... ... ... .1478 kg Estimated total weight of Electropak (wet) ... ... ... ... ... ... .1582 kgOverall dimensions - Electropak-height... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..1725 mm -length (air cleaner fitted).. ... ... ... ... ... ... ... ... ... ... ... ..2410 mm -width ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1120 mmMoments of inertia (mk²)Engine... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .1,36 kgm²Flywheel ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1.41 kgm²Centre of gravityForward of rear face of cylinder block... ... ... ... ... ... ... ... 650 mm Above crankshaft centre line ... ... ... ... ... ... ... ... ... ... ... 250 mmCyclic irregularity-1500 rev/min ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..1,54-1800 rev/min ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..1,82PerformanceNote:All data based on operation to ISO 3046-1, BS5514 AND DIN 6271standard reference conditions.All data based on 42584 MJ/kg calorific value for diesel conforming to specification BS2869 ClassA2All ratings certified to within .. ... ... ... ... ... ... ... ... ... ... ... ... + 3%Steady state speed capability at constant load - G2.. ... .. + 0,25%Test conditions-air temperature . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...25 °C -barometric pressure.. ... ... ... ... ... ... ... ... ... ... ... ... ... ...100 kPa -relative humidity ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 30 %-air inlet restriction at maximum power (nominal).. ... ... ... 2,5 kPa -exhaust back pressure at maximum power (nominal).. ... 6,8 kPa -fuel temperature (inlet pump) ... ... ... ... ... ... ... ... ... ... ... ...40 °CSound levelSound pressure level (exhaust piped away, cooling pack and air cleaner fitted)-1500 rev/min. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 102 dB(A)-1800 rev/min. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .104,6 dB(A)If the engine is to operate in ambient conditions other than those of the test conditions, suitable adjustments must be made for these changes. For full details, contact Perkins Technical Service Department.Emissions capability: All 2206A ratings are to ‘best fuel consumption’ and do not comply to Harmonised International regulation Emission Limits.General installation DesignationUnits Prime Standby Prime Standby 50Hz @ 1500 rev/min60Hz @ 1800 rev/minGross engine powerkWb 324,2368,4373,4406,5Brake mean effective pressure kPa 2061235519842171Combustion air flow (at rated speed)m³/min 21,323,627,429,0Exhaust gas flow (Max.)m³/min 56,664,867,573,5Exhaust gas mass flowkg/min 25,127,832,634,5Exhaust gas temperature (turbocharger outlet)°C630630630660Boost pressure ratio2,83,23,13,4Overall thermal efficiency (nett)%41,340,840,740,3Typical genset electrical output (0.8pf 25 °C)kWe 280320320350kVA 350400400438Assumed alternator efficiency %9292Energy balance Energy in fuelkWt 739,9854,1857,0945,7Energy in power output (gross)kWb 324,2368,4373,4406,5Energy to additional losses kWb 4,95,55,66,1Energy to cooling fan kWm 1419Energy in power output (nett)kWt 305,3348,9348,8381,4Energy to exhaustkWt 213,2245,3244,7273,7Energy to coolant and lubricating oil kWt 113,5128,5130,2139,5Energy to charge cooler kWt 64,879,768,476,5Energy to radiationkWt24,132,240,349,5 - 2206A-E13TAG22200 Series2206A-E13TAG2 2206A-E13TAG3ElectropaKGeneral installationDesignation Units Prime Standby Prime Standby50Hz @ 1500 rev/min60Hz @ 1800 rev/min Gross engine power kWb368,4412,5373,4406,5 Brake mean effective pressure kPa2344263719842171 Combustion air flow (at rated speed)m³/min24,326,427,429,0 Exhaust gas flow (Max.)m³/min64,672,567,573,5 Exhaust gas mass flow kg/min28,130,932,634,5 Exhaust gas temperature (turbocharger outlet)°C630630660660 Boost pressure ratio3,23,53,13,4 Overall thermal efficiency (nett)%41,440,940,740,3Typical genset electrical output (0.8pf 25 °C)kWe320360320350 kVA400450400438Assumed alternator efficiency%9292Energy balanceEnergy in fuel kWt842,6958,2857,0945,7 Energy in power output (gross)kWb368,4412,5373,4406,5 Energy to additional losses kWb5,56,25,66,1 Energy to cooling fan kWm1419Energy in power output (nett)kWt348,9392,3348,8381,4 Energy to exhaust kWt252,6290,4244,7273,7 Energy to coolant and lubricating oil kWt127,3139,9130,2139,5 Energy to charge cooler kWt60,375,568,476,5 Energy to radiation kWt34,039,840,349,6 - 2206A-E13TAG3Rating definitionsPrime powerVariable load. Unlimited hours usage with an average load factor of 70% of the published Prime Power rating over each 24 hour period.A 10% overload is available for 1 hour in every 12 hours of operationStandby powerVariable load. Limited to 500 hours annual usage up to 300 hours of which may be continuous running, No overload is permittedCooling systemRadiatorFace area . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...1,238 m²Number of rows and materials . ... ... ... ... ... ... .1rows, aluminium Matrix density and material .. ... ... ... ..12 fins per inch, aluminium Width of matrix . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1048 mm Height of matrix ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1100 mm Weight of radiator (dry). ... ... ... ... ... ... ... ... ... ... ... ... ... ..132 kg Pressure cap setting (min) ... ... ... ... ... ... ... ... ... ... ... ... ..70 kPa Charge coolerFace area.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...1,006 m²Number of rows and materials . ... ... ... ... ... ... .1rows, aluminium Matrix density and material .. ... ... ... ..12 fins per inch, aluminium Width of matrix . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 915 mm Height of matrix ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1100 mm Coolant pumpSpeed @ 1500 rev/min. ... ... ... ... ... ... ... ... ... ... ... 2056 rev/min Speed @ 1800 rev/min. ... ... ... ... ... ... ... ... ... ... ... 2468 rev/min Drive method. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .Gear FanDiameter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 927 mm Drive ratio.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...0,92:1 Number of blades.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 9 Material. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .composite Type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . pusher Cooling fan air flow @ 1500 rev/min. ... ... ... ... ... ... ...654 m³/min Cooling fan air flow @ 1800 rev/min. ... ... ... ... ... ... ...788 m³/min CoolantTotal system capacity ... ... ... ... ... ... ... ... ... ... ... ... ... . 51,4 litres Max. top tank temperature ... ... ... ... ... ... ... ... ... ... ... ... ..104 °C Temperature rise across engine... ... ... ... ... ... ... ... ... ... ... 10 °C Max. pressure in engine cooling circuit. ... ... ... ... ... ... ... ..70 kPa Max. permissible external system resistance ... ... ... ... ... ..30 kPa Max. static pressure head on pump.. ... ... ... ... ... ... ... ... ..30 kPa Coolant flow (min) against 30 kPa rstriction@ 1500 rev/min. ... ... ... ... ... ... ... ... ... ... ... ... ... ... .5,3 litres/sec @ 1800 rev/min. ... ... ... ... ... ... ... ... ... ... ... ... ... ... .6,7 litres/sec Thermostat operation range.. ... ... ... ... ... ... ... ... ... ... 87 to 98°C For details of recommended coolant specifications, refer to the Operation and Maintenance Manual for this engine model Duct allowanceDuct allowance 2206A-E13TAG2 - standbyMaximum additional retsriction (duct allowance) to cooling airflow and resultant minimum airflowEngine speedrev/minAmbient clear-ance inhibitedcoolant °CDuctallowancePam³/min 150059200563180059200716Duct allowance 2206A-E13TAG3 - standbyMaximum additional retsriction (duct allowance) to cooling airflow and resultant minimum airflowEngine speedrev/minAmbient clear-ance inhibitedcoolant °CDuctallowancePam³/min 150055200563180059200716Electrical system-type... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .24 Volt negative earth Alternator type ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .22SI -alternator voltage.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..24V -alternator output ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..70A Starter motor type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...39MT -starter motor voltage. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..24V -starter motor power... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .7,8 kW Number of teeth on flywheel.. ... ... ... ... ... ... ... ... ... ... ... ... ..113 Number of teeth on starter pinion.. ... ... ... ... ... ... ... ... ... ... (11)Minimum cranking speed... ... ... ... ... ... ... ... ... ... ... 106 rev/min Starter solenoid maximum-pull-in current @ 0°C ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 200A -hold-in current @ 0°C... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..25A Cold start recommendations-5°C to -10°Coil... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..SAE grade 15W40 Starter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...42MT Battery ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 volts Max. breakaway current. ... ... ... ... ... ... ... ... ... ... ... ..1311 amps Cranking current ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 588 amps Starting aids (ECM controlled)... ... ... ... ... ... ... ... ... ... ... ... none Min. mean cranking speed. ... ... ... ... ... ... ... ... ... ... .106 rev/min -11°C to -25°Coil... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... SAE grade 5W40 Starter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...42MT Battery ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 24 volts Max. breakaway current. ... ... ... ... ... ... ... ... ... ... ... ..1585 amps Cranking current ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 828 amps Starting aids (ECM controlled)... block heater 1,5kW (110V/240V) Min. mean cranking speed. ... ... ... ... ... ... ... ... ... ... .106 rev/min Notes:z Battery capacity is defined by the 20 hour ratez The oil specification should be for the minimum ambient temperature as the oil will not be warmed by the immersion heaterz Breakaway current is dependent on the battery capacity available. Cables should capable of handling transient current twice that of cranking current.Exhaust systemMaximum back pressure-1800 rev/min . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .10,0 kPa Exhaust outlet, internal diameter. ... ... ... ... ... ... ... ... ... . 123 mm Fuel systemInjection system... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..MEUI Injector type. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..MEUI Governor type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... electronic Governing conforms to ... ... ... ... ... ... ... ... .ISO 8528-5 Class G2 Injector pressure.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .207 MPa Fuel lift pump-lift pump type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .gear driven -lift pump delivery @1500 rev/min... ... ... ... ... ... ... 480 litres/hour -lift pump delivery @1800 rev/min... ... ... ... ... ... ... 600 litres/hour -lift pump delivery pressure. ... ... ... ... ... ... ... ... ... ... ... ..621 kPa -max. suction head at pump inlet ... ... ... ... ... ... ... ... ... ... ... .3 m -max. static pressure head.. ... ... ... ... ... ... ... ... ... ... ... ... ... .4 m -max. fuel inlet temperature. ... ... ... ... ... ... ... ... ... ... ... ... ..55 °C -fuel filter spacing primary... ... ... ... ... ... ... ... ... ... ... .10 microns -fuel filter spacing secondary... ... ... ... ... ... ... ... ... ... ...2 microns Fuel specificationBS2869 Class A2 or BSEN590ASTM D975 Class 1D and class 2DNote:For further information on fuel specifications and restrictions, refer to the OMM, “Fluid Recommendations” for this engine model. Induction systemMaximum air intake restriction-clean filter... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...2,5 kPa -dirty filter. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...6,4 kPa -air filter type ... ... ... ... ... ... ... . paper element - 15 inch diameterLubrication systemMaximum total system oil capacity ... ... ... ... ... ... ... ... ... .40 litres Minimum oil capacity in sump... ... ... ... ... ... ... ... ... ... ..32,5 litres Maximum oil capacity in sump.. ... ... ... ... ... ... ... ... ... ... .38 litres Maximum engine operating angles -front up, front down, right side, left side ... ... ... ... ... ... ... ... ... 7 °Lubricating oil-oil flow @ 1500 rev/min... ... ... ... ... ... ... ... ... ... ... 140 litres/min -oil flow @ 1800 rev/min... ... ... ... ... ... ... ... ... ... ... 172 litres/min -oil pressure at bearings @ 1500 rev/min. ... ... ... ... ... ... 310 kPa -oil pressure at bearings @ 1800 rev/min. ... ... ... ... ... ... 358 kPa -oil pressure at bearings (min).. ... ... ... ... ... ... ... ... ... ... 270 kPa -oil temperature (continuous operation) ... ... ... ... ... ... ... ..113 °C -oil consumption at full load as a % of fuel consumption.. ...0.15% Oil filter screen spacing. ... ... ... ... ... ... ... ... ... ... ... ... 30 microns Oil consumption as % of fuel consumption... ... ... ... ... ... ... ... 0,1 Sump drain plug tapping... ... ... ... ... ... ... ... ... ... ... ... .1 1/8 UNF Lubricating oil specification... ... ... ... ... ... API-CH4 - SAE15W-40 Recommended SAE viscosityEngine Oil ViscosityEMA LRG-1API CH-4 Viscosity GradeAmbient Temperature Minimum MaximumSAE 0W20-40 °C10 °CSAE 0W30-40 °C30 °CSAE 0W40-40 °C40 °CSAE 5W30-30 °C30 °CSAE 5W40-30 °C40 °CSAE 10W30-20 °C40 °CSAE 15W40-10 °C50 °C MountingsMaximum static bending moment at rear face of block. ...1356 Nm Fuel consumption2206A-E13TAG2 - 1500 rev/minLoad g/kWhr l/hr Standby19580 110% Prime power19577 100% Prime power19671 75% of Prime power19854 50% of Prime power203372206A-E13TAG3 - 1500 rev/minLoad g/kWhr l/hr Standby19490 110% Prime power19689 100% Prime power19781 75% of Prime power19962 50% of Prime power202422206A-E13TAG2 - 1800 rev/minLoad g/kWhr l/hr Standby19387 110% Prime power19588 100% Prime power19681 75% of Prime power19962 50% of Prime power205432206A-E13TAG3 - 1800 rev/minLoad g/kWhr l/hr Standby19387 110% Prime power19588 100% Prime power19681 75% of Prime power19962 50% of Prime power20543All fuel consumption figures are based on Nett powerAll information in the document is substantially correct at the time of printing but may be subsequently altered by the company.Distributed by2200 Series2206A-E13TAG22206A-E13TAG3Load acceptance TAG2 (cold) Initial load application: When engine reaches rated speed(15 seconds maximum after engine starts to crank)DescriptorUnits 50 Hz 60Hz % of prime power %6680Load (nett)kWm 184,8256Transient frequency deviation%<10<10Frequency recoverySeconds55Second load application: When engine reaches rated speed(5 seconds after initial load application)DescriptorUnits 50 Hz 60Hz % of prime power %7385Load (nett)kWm 204,4272Transient frequency deviation%<10<10Frequency recoverySeconds55TAG3 (cold) Initial load application: When engine reaches rated speed(15 seconds maximum after engine starts to crank)DescriptorUnits 50 Hz 60Hz % of prime power %5880Load (nett)kWm 185,6256Transient frequency deviation%<10<10Frequency recoverySeconds55Second load application: When engine reaches rated speed(5 seconds after initial load application)DescriptorUnits 50 Hz 60Hz % of prime power %6585Load (nett)kWm 208272Transient frequency deviation%<10<10Frequency recoverySeconds55The information shown above complies with the requirements of classification 3 and 4 of ISO 8528-12 and G2 operating limits stated in ISO 8528-5The above figures were obtained under the following test conditions:-minimum engine block temperature.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 45 °C -ambient temperature. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..15 °C -governing mode ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... isochronous -alternator efficiency... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 92%-alternator inertia ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6,9 kgm²-under frequency roll off (UFRO) point set to. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1 Hz below rated -UFRO rate set to... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 2% voltage / 1% frequency LAM on/off.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...off All tests were conducted using an engine which was installed and serviced to Perkins Engines Company Limited recommendations.Note:The general arrangement drawings shown in this data sheet are for guidance only. For installation purposes, latest versions should be requested from the Applications Dept., Perkins Engines Stafford, ST16 3UB United Kingdom.P u b l i c a t i o n N o . T P D 1687E 2. O c t o b e r 2008 P e r k i n s E n g i n e s C o m p a n y L i m i t e dPerkins Engines Company LimitedPeterborough PE1 5NA United Kingdom Telephone +44 (0) 1733 583000Fax +44 (0) 1733 。

BOSCH FRENCH FITNESS FF-FSR100-CB商业功能弧形杠训练室用户手册说明书

Manuals+— User Manuals Simpliﬁed.FRENCH FITNESS FF-FSR100-CB Commercial Functional Smith Rack Instruction ManualHome » FRENCH FITNESS » FRENCH FITNESS FF-FSR100-CB Commercial Functional Smith Rack InstructionManualFRENCH FITNESS FF-FSR100-CB Commercial Functional Smith Rack Instruction ManualContents1 FEATURES2 TECH SPECS3 ACCESSORIES INCLUDED4 IMPORTANT SAFE T Y INSTRUCT IONS5 ACCESSORIES LIST (INDIVIDUALPACKAGING)6 PARTS LIST7 BLISTER PACK SCREW LIST8 ASSEMBL Y STEPS9 WARRANTY10 Documents / Resources11 Related PostsFEATURESTHE ULTIMATE ALL-IN-ONE MACHINESmith Machine (Counterbalanced)Squat RackFunctional TrainerLandminePull Up BarSeated Row Foot RestJammer Arm (Optional)Leg Press (Optional)Bench (Optional)Lat Pulldown / Low Row (Optional)Dip Handle (Optional)Lat Pull Down Seat (optional)Pull Up Connecting Bar (optional)California Residents see Prop 65 WARNINGSTECH SPECS11 Gauge SteelSquare Tube: 75mm x 75mm x 3mmSize of Ea. Cable Column Hole: 0.658″Maximum user weight: 350 lbs (771 kg)Maximum user weight (Lat Pulldown Knee Cushion): 350 lbs (771 kg)Maximum Capacity (Pull Up Bar): 551 lbs (250 kg)Max Load (J Hooks): 992 lbs (450 kg)Max Load (Spotter Arms): 1102 lbs (500 kg)Max Load (Smith Bar): 992 lbs (450 kg)Max Load (Seated Foot Rest): 661 lbs (300 kg)Max Load (Plate Storage): 135 lbs (Per Weight Horn) x 6 Weight Horns = 810 lbs totalSmith Bearing Type: Ball BearingsWeight Stack: (2) 220lb stacks (440lbs 10 Years Parts, 1 Year Labor (Commercial) total) – Upgraded Weight Stacks OptionalNote: The machine must be upgraded at the time of purchase since the upgrade is not possible once it ships because the entire stack is diﬀerent.Pulley to Weight Ratio: 2:1 (Feels like 110 lbs per side due to ratio)Weight: 1197 lbs (543 KG)Ratio: 2:1Inner Frame Width: 42.52″Height to top pulley: 91.2″Height to bar rack: 81.1″Width from weight-horn to weight-horn: 70.9″Inner Frame Width: 42″Width with bar: 86.6″Length: 66.4″Dimensions: 66.4″L x 86.6″W x 91.2″H (L:1689mm, W:220mm, H:2318mm)(2) Olympic Bar Holders (For Storage): Located on Back of MachineACCESSORIES INCLUDED(1) 7′ (86″) Olympic Bar(2) Dual Hook Revolving Straight Bar(3) Lat Pulldown Bar(4) Small Straight Bar(5) Lat Pulldown Support Pad(6) Safety Support / Bar Catch (Left)(7) Safety Support / Bar Catch (Right)(8) Standard hook(9) Landmine (Place on inside or outside of machine)(10) Foot Plate(11) J Cup (left)(12) J Cup (Right)(13) Extension Chains (Set)(14) Stirrup Handles (Set)(15) T-Bar Row Handle(16) Olympic Bar Lock Plate(17) Steel Lock(18) Hook Welding(19) Tricep Rope(20) Jaw Lock CollarIMPORTANT SAFE T Y INSTRUCT IONSWARRANTYLifetime Parts and 1 Year Labor WarrantyWARNING – Read all instructions before using this machine.Install the product on a ﬂat level surfacePlace your unit on a solid, level surface when in useNever allow children on or near the machine.Keep hands away from all moving parts.Never drop or insert any object into any openings.Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or seek assistance if necessary.Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine.Only 1 person at a time should use the machine.If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELYDo not use the machine near water or outdoors.Keep hands away from all moving parts.Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine.Use the machine only for its intended use as described in this manual. DO NOT use attachments notrecommended by the manufacturer.Do not place any sharp objects around the machine.Disabled person should not use the machine without a qualiﬁed person or physician in attendance.ever operate the machine if the machine is not functioning properly.A spotter is recommended during exercise.ACCESSORIES LIST (INDIVIDUAL PACKAGING)PARTS LISTModel QTY 1weight stack bottom tube welding assembly22weight stack assembly23top weight stack welding group24Hook column riser welding group25Front connection welding group16Upper pulley block27Front bend pipe welding group18Front bend pipe welding group19Rear riser welding group2 10Front pillar welding group2 11Lower connection welding group2 12Sliding sleeve welding group2 13Left safety frame group1 14Right safety frame group1 15Hook welding group left1 16Hook welding group right1 17Pressure leg welding group1 18Hanging rod welding group6 19Hook weldment4 20Bottom weight holder assmemly1 21butterﬂy pulley block2 22cable head2 23low row bar2 24Pull welding group1 25Low row welding group1 26lat pulldown welding group1 27Push rod welding group1 28Smith Insurance Group left1 29Smith Insurance Group Right1 30Push rod assembly1 31Pedal set132Olympic bar 2.2m2 33safety hook2 34jacket6 35guide rod4 36Large guard plate2 37Smith optical axis2 38Olympic pole lock plate2 39T-shaped pin 100mm1 40Optical axis ﬁxed seat2 41Optical axis ﬁxing plate2 42barbell card holder2 43056 guide rod pad4 44Decorative board 28 45Card rope pin (ABS)4 46Rubber mat4 47Pulley limit sleeve8 48φ25x430L ﬁxed shaft2 49Top weight stack group2 50New pin2 51Long weight stack38 53Cable A (9890)2 54Cable B (2400)2 55Cable C (1900)4BLISTER PACK SCREW LISTModel QTYA External hexagonal screw M10X802B M10 lock nut18C Flat washer Φ1662D External hexagonal screw M16X10058E Lock nut M1658F External hexagonal screw M10X169GΦ10 ﬂat washer12 H Small hole big pad Φ30XΦ11X21K External hexagonal screw M10X252L Hexagonal bolt M16×304M External hexagonal screws (galvanized) M10X3010 N No. 17 wrench2P No. 24 wrench2ASSEMBLY STEPSSteps Model No.Name QTY11weight stack bottom tube welding assembly1 7Front bend pipe welding group1 9Rear riser welding group1 10Front pillar welding group1C Flat washer Φ164D External hexagonal screw M16X1004E Lock nut M164Steps Model No.Name QTY21weight stack bottom tube welding assembly1 8Front bend pipe welding group1 9Rear riser welding group1 10Front pillar welding group1C Flat washer Φ164D External hexagonal screw M16X1004E Lock nut M164Steps Model No.Name QTY311Lower connection welding group2 12Sliding sleeve welding group2C Flat washer Φ168D External hexagonal screw M16X1008E Lock nut M168Steps Model No.Name QTY43top weight satck welding group2 6Upper pulley block2 38Olympic pole lock plate2C Flat washer Φ168D External hexagonal screw M16X1008E Lock nut M168Steps Model No.Name QTY54Hook column riser welding group2C Flat washer Φ168D External hexagonal screw M16X1004E Lock nut M164 L Hexagonal bolt M16×304Steps Model No.Name QTY644Decorative board 28C Flat washer Φ1612D External hexagonal screw M16X10012E Lock nut M1612Steps Model No.Name QTY728Smith Insurance Group left1 29Smith Insurance Group right1 30Push rod assembly1 37Smith optical axis2 43056 guide rod pad4Steps Model No.Name QTY840optical axis holder2M External hexagonal screw M10X304Steps Model No.Name QTY95Front connection welding group1C Flat washer Φ166D External hexagonal screw M16X1006E Lock nut M166Steps Model No.Name QTY1035guide rod4 41Optical axis ﬁxing plate2 46rubber pad4 49Top weight stack group2 51weight stack38 M External hexagonal screw M10X304Steps Model No.Name QTY1119Hook weldment4 21butterﬂy pulley block2 47Pulley limit sleeve8 50New pin2A External hexagonal screw M10X802B M10 lock nut6Steps Model No.Name QTY1222cable head2 23low row bar2 33safety hook2 45Card rope pin (ABS)4 53cable A(9890)2 B M10 lock nut2 GΦ10 ﬂat washer2 K External hexagonal screw M10X252Steps Model No.Name QTY132Weight stack assembly2 54cable B 2400 2 55cableC 1900 4 B M10 lock nut2 GΦ10 ﬂat washer2 M External hexagonal screws (galvanized) M10X302Steps Model No.Name QTY1418Hanging rod welding group6 349107-06096 42barbell card holder2C Flat washer Φ1612D External hexagonal screw M16X10012E Lock nut M1612Steps Model No.Name QTY1536Large guard plate2 B M10 lock nut8 F External hexagonal screw M10X168 GΦ10 ﬂat washer8Steps Model No.Name QTY1620Bottom weight holder assmemly1 31Pedal set1 48φ25x430L ﬁxed shaft2 F External hexagonal screw M10X161 H Small hole big pad Φ30XΦ11X21Steps Model No.Name QTY1713Left safety frame group1 14Right safety frame group1 15Hook welding group left1 16Hook welding group right1Steps Model No.Name QTY1817Pressure leg welding group1 32Qlymppic bar 2.2m2 39T-shaped pin 100mm1Steps Model No.Name QTY1924Pull welding group1 25low row welding group1 26lat pulldown welding group1 27Push rod welding group1WARRANTY10 Years Parts, 1 Year Labor (Commercial)Documents / ResourcesFRENCH FITNESS FF-FSR100-CB Commercial Functional Smith Rack [pdf] Instruction ManualFF-FSR100-CB, FF-FSR100-CB Commercial Functional Smith Rack, Commercial Functional Smith Rack, Functional Smith Rack, Smith Rack, RackManuals+,。

上工申贝飞人牌缝包机到底哪些型号才是原装正品

我公司专业提供各种手提式缝包机，我们自产自销凯工牌缝包机同时代销各大品牌电动缝包机，例如上工申贝飞人牌缝包机，台湾耀鸿防爆缝包机，耀翰单线缝包机，包边封包机，纽郎牌手持式便携缝包机等等，需要哪款缝包机都可以联系我公司，我们会给你非常优惠的单价，会给你满意的售后服务，想在购买前来公司参观测试的用户欢迎你前来咨询洽谈合租事项。

飞人牌GK9-2手提缝包机规格书：型号：GK9-2品牌：飞人牌产地：大陆代理：凯工PACK线痕：单线链条式转速：12000转电压：220V功率：130瓦重量：（3.8kg）整件：6台装尺寸：0*285*225mm——————————————————————————————————GK9-3安全缝包机规格书如下：型号：GK9-3品牌：飞人牌产地：大陆代理：凯工PACK线痕：单线链条式转速：12000转电压：36V（通过变压器供电）功率：130瓦重量：（3.8kg）尺寸：450*285*225——————————————————————————————————GK9-8手提式缝包机规格书：名称：缝包机型号：GK9-8（精品型）品牌：飞人牌厂家：上工申贝制造代销：凯工PACK产地：中国线痕：单线链条式转速：12000转电压：220V功率：130瓦重量：（3.8kg）尺寸：450*285*225包装：6台一件上工申贝飞人牌缝包机到底哪些型号才是原装正品：1、现在市场上有很多缝包机都打着飞人牌的名号在销售机器，实际上工申贝原厂的缝包机就三种型号gk9-2 gk9-3 gk9-8其它均为贴牌缝包机，我们建议喜欢使用飞人封包机的用户，如果你是缝编织袋的那么你就考虑这三款就可以了其它什么新款枪式缝包机基本都贴牌缝包机，这种贴牌机器不建议选择因为后期的维护维修没有办法找到零配件非常麻烦。

2、如果你比较喜欢飞人这个品牌，想用飞人原装缝包机那么请联系我们给你建议一些比较合适的缝包工具，例如缝编织袋我们就建议你使用gk9-2缝包机如果你缝的袋料比较复杂我们建议你使用gk9-8缝包机，如果你使用的环境比潮湿，担心漏电的用户你就选择gk9-3缝包机就可以了。

麦顿fd2 flexdraper

56 | MacDon FD2 FlexDraper®
SPECIFICATIONS | 57
2 pairs of coil springs, independent adjustment, transport lock-out / 178 mm (7”) / 4.8 degrees
FD2 FLEX RANGE
Standard (Factory) Range
Increased Range**
2000 mm (78.7”) width Hydraulic drive (reversible), self tracking rubber coated polyester fabric feed draper with rubber slats 107-122 m/min (350-400 ft/min), varies with combine brand
Reel: Type / Drive / Speed / Fingers
Pick-up reel, five bats, two-piece (double) or three-piece (triple), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm (varies depending on combine model) / 279 mm (11”) length, wear-resistant HD plastic, 102 mm (4”) spacing
*Product size availability varies by market. **All listed weights are approximations and will vary depending on options installed. Check with your dealer for combine ratings. Weight includes FM200 Float Module. The FM200 Float Module weighs approximately 1029kg (2270 lb); this number varies by combine model

Bondstrand Series 2000M-FP和7000M-FP火抗性纤维glass管道和配件

Bondstrand ® Series 2000M-FP and 7000M-FP Fire-Resistant Fiberglass Pipe and FittingsBondstrand Series 2000M-FP is a fiberglass-reinforced epoxy resin piping system intended primarily for wet and dry deluge systems where excellent corrosion resistance as well as fire resistance are necessary and low weight is desired. Series 2000M-FP features a thick intumescent coating applied at the factory to the exterior of Series 2000M pipe and fittings. When exposed to fire, the coating expands to form an incombustible foam char that protects and insulates the piping. The intumescent coating is available in 5 mm and 8 mm thicknesses.Series 7000M-FP pipe and fittings are electrically conductive.• Offshore fire protection systems (wet and dry)• Onshore above ground fire protection piping• American Bureau of Shipping (U.S.) • Det Norske Veritas • Germanischer Lloyd• Lloyd’s Register of Shipping (U.K.)• National Sanitation Foundation (U.S.) • United Kingdom Offshore Operators Association• United States Coast GuardDescriptionUses and ApplicationsListings and Approvals forBondstrand Series 2000M-FP and 7000M-FPPiping SystemsBondstrand Series 2000M-FP and 7000M-FP have been demonstrated to be capable of maintaining service pressure following exposure to a hydrocarbon fire (temp ~ 2000°F) no less than 5 minutes duration in the dry condition, and 25 minutes in the full-flow condition with expectation that service life would exceed 6 hours.Pipe system design for pressure ratings up to: 17.2 bar (250 psi) for 1 - 16 inch and 16.0 bar (232 psi) for 18 - 40 inch, depending type of fittings. Refer to NOV Fiber Glass Systems.Individual system components may not have the same ratings as the pipe. Refer to the detailed product information for the specific components to determine the pressure rating for the system as a whole.PerformanceBondstrand products are manufactured to meet the highest standard of quality in accordance with ISO 9001. The products are designed to meet ANSI and ASTM standards. Bondstrand 2000M-FP and 7000M-FP piping meet all applicable requirements of ASTM F 1173 for fiberglass-reinforced resin pipe and fittings.Bondstrand 2000M-FP and 7000M-FP products have been tested by Southwest Research Institute (SwRI) for performance in jet fire conditions in accordance with UKOOA guidelines. The 2000M-FP and 7000M-FP system meets the requirements for fire endurance in a hydrocarbon jet fire, certified by SwRI.Testing and Standards•***************Pipe — Filament-wound fiberglass-reinforced epoxy pipe with nominal 0.020-inch (0.5 mm) integral resin-rich reinforced liner (2000M-FP) or with no liner, with comingled carbon fibers (7000M-FP) and 5 mm or 8 mm external intumescent coating. For typical physical and mechanical properties, refer to Bondstrand Product Data, Bondstrand Series 2000M and 7000M Fiberglass Pipe and Fittings for Shipboard and Offshore Platform Service.Fittings — Wide range of lined filament-wound fiberglass-reinforced epoxy fittings.Flanges — One-piece filament-wound fiberglass-reinforced epoxy resin flanges in heavy-duty hub-less configuration. Flange covers made with intumescent material is used to protect flanges. Joining systems — Quick-Lock straight/taper adhesive-bonded joint featuring integral pipe stop in bell for predictable, precise laying lengths. Taper/taper bonded joints supplied in larger sizes.Thermosetting adhesive for bonded joints – This includes both the Quick Lock and Taper/Taper joitns - PSX™•34 or PSX™•60 two-part epoxy adhesive.PSX•60 adhesive is conductive and is to be used on all installations of Bondstrand 7000M pipe.Typical joint lengths— All diameters are supplied in nominal 20 ft. (6.1m) lengths.Fittings — See Bondstrand Product Data, Series 2000M-FP and 7000M-FP Fittings, for dimen-sions, shipping weights and pressure ratings.90° and 45° elbows Deluge couplings sized to accept standard spray nozzles Tees and reducing tees Reducing saddles furnished with**Couplings * Quick-Lock® socket outlet Nipples * Flanged outlet ReducersFlanges — Series 2000M-FP and 7000M-FP flanges are offered in one configuration:• One-piece hubless (heavy duty)Bondstrand marine flanges are produced with the following drillings for easy connection to piping systems currently in common use; other drillings, as well as undrilled flanges, are available:• ANSI B16.5 Cl 150 & Cl 300 • JIS B2211 5 kg/cm 2• API 605 Cl 150 & Cl 300 • JIS B2212 10 kg/cm 2• ISO 2084 NP-10 & NP-16 • JIS B2213 16 kg/cm 2See Bondstrand Product Data,Series 2000M-FP and 7000M-FP Flanges for dimensions and weights for the drillings given above. Flange covers made of the intumescent material used on the exterior of the pipe are available and required for complete system performance in a fire situation.CharacteristicsFittings and FlangesInstallation2The installation procedures for Bondstrand Series 2000M-FP and 7000M-FP are described in Bond-strand Installation Guide. Standard pipe and fittings are joined using PSX™•34 or PSX™•60 ad-hesive. Electrically conductive systems are bonded with PSX•60 adhesive. Before adhesive cures, remove the excess adhesive from the joined pipe and fittings. The joint gaps in the intumescentcoating between adjacent pipe and fittings are filled with a similar intumescent compound.Sizes above 16” are available upon request.3Consult NOV Fiber Glass Systems for further recommendations concerning shore side or offshore use of Bondstrand piping systems. For particular questions regarding the installation and use of Bondstrand Series 2000M-FP and 7000M-FP pipe and fittings, refer to the NOV Fiber Glass Sys-tems Marine Engineering Manual.Technical SupportSupport Spacing•***************©2014 National Oilwell Varco. All rights reserved.MOS3200ENG November 2014National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross-reference the bulletin date with the most current version listed at the web site noted in this literature.North AmericaSouth AmericaEurope Asia PacificMiddle East 17115 San Pedro Ave. Suite 200 Estrada de Acesso á ZonaP .O. Box 6, 4190 CANo. 7A, Tuas Avenue 3 P .O. Box 17324San Antonio, Texas 78232 USA Industrial Portuária da Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore 639407 Dubai, UAEPhone: 210 477 7500 Recife, PE, Brazil 55.590-000 Phone: 31 345 587 587 Phone: 65 6861 6118 Phone: 971 4881 3566Phone: 55 81 3501 0023Note: Support spacing shown is based on pipe filled with water having a density of 1000 kg/m 3 with no provision for weight of valves, flanges, etc.。

flydragon b10动力套装说明书

持续电流：130A （散热条件良好）瞬时电流：150A （散热条件良好）默认油门：1100-1900u s （固化,不可校准）型号：3316 碳纤折叠桨重量：0.2kg型号：10010KV ：105KV 外径：110mm电调电机桨叶型号: FlyDragon B10制造型号：B-FW130013-40A1锂电节数：5-14S推荐应用：7-10kg 单轴/12S 8.5-11kg 单轴/13S 9.5-12kg 单轴/14S适用碳管：40mm重量：1.25kg （不含桨叶）最大拉力：21kg多旋翼飞行器● 启动保护：当加大油门时，三秒内未能正常启动马达，电调将会关闭动力输出，油门摇杆需再次置于最低点后才可以重新启动马达（出现这种情况的原因可能有：电调和马达连线接触不良或有断开、螺旋桨被其他物体阻挡等）。

● 过负荷保护：当负载突然变得极大时，电调会切断动力，须油门归零后才可正常操作。

当马达和电调失步时，电调会自动尝试重新启动。

● 油门信号丢失保护：当电调检测到油门遥控信号丢失0.32 秒以上即立即关闭输出，以免因螺旋桨继续高速转动而造成更大的损失。

信号恢复后，电调也随即恢复相应的功率输出。

● 电调不可泡水工作。

合理使用可延长使用寿命，电调防溅水，耐腐蚀。

在使用过一定时间后，请清理电调上的水渍，污渍，避免电调短路。

● 动力系统中电调和电机部分在出厂已经组装完成，用户可根据电机旋转方向安装对应的桨叶，然后整体安装在植保机机架上。

● 如需更换配件，如桨叶，桨夹等，请联系飞盈佳乐售后，禁止用户自行使用不适当的配件。

出厂默认为22.5°进角，动力套装已经匹配良好，正常情况不需要更改进角。

● ● LED 可在出厂前预设置颜色。

如在使用中想再次更改，需用手机Flycolor App 和Wiﬁ模块(需单独购买)进行更改，请咨询飞盈佳乐售后。

●使用时务必远离人群、高压线等，请遵守法律法规使用。

● 无论任何时候都要注意极性，供电之前一定要反复检查。

桑德佩珀潜水泵手册说明书

S A N D P I P E R P U M P.C O MWarren Rupp, Inc. • A Unit of IDEX Corporation 800 N. Main St., Mansfield, Ohio 44902 USA Telephone 419.524.8388 • Fax 419.522.78675 YEAR LIMITED PRODUCT WARRANTY5 Year Guarantee for defects in material or workmanship. See /content/warranty-certificationsfor complete warranty, including terms and conditions, limitations and E ONLY GENUINE SANDPIPER PARTS All certification, standards, guarantees & warrantiesoriginally supplied with this pump will be invalidated by the use of service parts not identified as “Genuine SANDPIPER Parts.”SUCTION / DISCHARGE PORT SIZE • 1/2” NPT (Internal) or 1/2” BSP (Tapered)• 1” NPT (External) or 1” BSP (Tapered)CAPACITY• 0 to 14 GPM (0 to 52 LPM)AIR DISTRIBUTION VALVE • No-lube, no-stall design SOLIDS-HANDLING • Up to .125 in. (3mm)HEADS UP TO• 100 psi or 231 ft. of water (7 bar or 70 meters)MAXIMUM OPERATING PRESSURE • 100 psi (7 bar)DISPLACEMENT/STROKE • .026 Gallon / .098 liter WEIGHTS• Polypropylene 16 lbs. (8kg)• PVDF 18 lbs. (9kgDIMENSIONSS05 NON-METALLIC PUMPTECHNICAL DATA SHEETPERFORMANCEISO 9001 Certified I SO 14001 CertifiedII IISTANDARD DUTY BALL VALVE PUMPSOffering the widest range of performance and application capabilitiesSERIES11.5429310.11257A.0725.451389.792491.38353.07781.75441.481.75446.56167SUCTION PORT1/2" FNPT (INTERNAL)1" MNPT (EXTERNAL)DISCHARGE PORT 1/2" FNPT (INTERNAL)1" MNPT (EXTERNAL)MANIFOLD CAN ROTATE 90FROM VERTICAL CENTERLINEINTEGRAL MUFFLERAIR INLET 1/4 FNPT3.63926.561674X .369SUCTION PORT1/2" FNPT (INTERNAL)1" MNPT (EXTERNAL)STANDARD INTEGRAL MUFFLERMTG. SLOTPerformance based on water at ambient temperature.468101214162CAPACITYGPM LPM100806040201020304050600B RP IH E A D12345670302025101559.167.634.51.5N P S H RF e e tM e t e r s AIR CONSUMPTION IN SCFM AIR PRESSURE IN PSI2 (4)4 (7)6 (10)8 (14)16 (27)Air I n le tP re s s ure14 (24)12 (20)10 (17)100 PS I (6.8 B a r )80P S I (5.44 Ba r )60 PS I (4.08 B ar)40 P SI(2.72B a r )20 P SI (1.36B a r )S A N D P I P E R P U M P.C O MWarren Rupp, Inc. • A Unit of IDEX Corporation 800 N. Main St., Mansfield, Ohio 44902 USA Telephone 419.524.8388 • Fax 419.522.7867S XX X X X X X X X X X XXModel #: S __ ____ __ __ __ __ __ __ __ __ __ ____(fill in frompump nameplate)Your Model #: Pump Pump Check Design Wetted Diaphragm/ Check Valve Non-Wetted Porting Pump Pump KitConfig. Size Valve Level Material Check Valve Seat Material Options Style Options OptionsMaterial Profile:Operating Temperatures:Max.Min.CONDUCTIVE ACETAL: Tough, impact resistant, ductile. Good abrasion resistance and low friction surface. Generally inert, with good chemical resistance except for strong acids and oxidizing agents.190°F 88°C-20°F -29°CEPDM: Shows very good water and chemical resistance. Has poor resistance to oils and solvents, but is fair in ketones and alcohols.280°F 138°C -40°F -40°C F KM (FLUOROCARBON): Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 70°F(21°C)) will attack FKM.350°F 177°C-40°F -40°CHYTREL ®: Good on acids, bases, amines and glycols at room temperatures only.220°F 104°C -20°F -29°C NEOPRENE: All purpose. Resistance to vegetable oils. Gener-ally not affected by moderate chemicals, fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones, esters and nitro hydrocarbons and chlorinated aromatic hydrocarbons.200°F 93°C-10°F -23°CNITRILE: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.190°F 88°C -10°F -23°CNYLON: 6/6 High strength and toughness over a wide tem-perature range. Moderate to good resistance to fuels, oils and chemicals.180°F 82°C 32°F 0°CPOLYPROPYLENE: A thermoplastic polymer. Moderate tensile and flex strength. Resists stong acids and alkali. Attacked by chlorine, fuming nitric acid and other strong oxidizing agents.180°F 82°C 32°F 0°C PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with excellent chemical resistance. Excellent for UV applications. High tensile strength and impact resistance.250°F 121°C 0°F -18°C SANTOPRENE ®: Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance.275°F 135°C -40°F -40°C UHMW PE: A thermoplastic that is highly resistant to a broad range of chemicals. Exhibits outstanding abrasion and impact resistance, along with environmental stress-cracking resistance.180°F 82°C -35°F -37°C URETHANE: Shows good resistance to abrasives. Has poor resistance to most solvents and oils.150°F 66°C 32°F 0°C VIRGIN PTFE: (PFA/TFE) Chemically inert, virtually impervious. Very few chemicals are known to chemically react with PTFE; molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures.220°F 104°C-35°F -37°CMaximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges.Metals:ALLOY C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.STAINLESS STEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for general applications. Commonly referred to as 316 Stainless Steel in the pump industry.CAUTION! Operating temperature limitations are as follows:EXPLANATION OF PUMP NOMENCLATUREPUMP BRANDS SANDPIPER ®PUMP SIZE 05 1/2”CHECK VALVE TYPE B Soilid Ball DESIGN LEVEL 2 Design Level WETTED MATERIAL K PVDF N NylonP PolypropyleneC Conductive Polypropylene V Conductive PVDFDIAPHRAGM/CHECK VALVE MATERIALS 1 Santoprene/Santoprene 2 Virgin PTFE/Santoprene Backup/Virgin PTFE B Nitrile/NitrileU Polyurethane/Polyurethane Z One-Piece Bonded/PTFE CHECK VALVE SEAT S Stainless Steel T Virgin PTFEMATERIALSNON-WETTED MATERIAL OPTIONSP Polypropylene1 Polypropylene w/PTFE Coated HardwareC Conductive Polypropylene PORTING OPTIONS N NPT ThreadsB BSP (Tapered) Threads 1 Dual Porting (NPT) 2 Top Dual Porting (NPT) 3 Bottom Dual Porting (NPT) 4 Dual Porting (BSP Tapered) 5 Top Dual Porting (BSP Tapered) 6 Bottom Dual Porting (BSP Tapered)PUMP STYLE S Standard I Inline Porting NPT Threads PUMP OPTIONS 0 None6 Metal Muffler KIT OPTIONS 00. NoneP0. 10.30VDC Pulse Output Kit P1. Intrinsically-Safe 5.30VDC, 110/120VAC 220/240 VAC Pulse Output KitP2. 110/120 or 220/240VAC Pulse Output KitE0. Solenoid Kit with 24VDC Coil E1. Solenoid Kit with 24VDC Explosion-Proof CoilE2. Solenoid Kit with 24VAC/12VDC Coil E3. Solenoid Kit with 12VDC Explosion-Proof CoilE4. Solenoid Kit with 110VAC Coil E5. Solenoid Kit with 110VAC Explosion-Proof CoilE6. Solenoid Kit with 220VAC Coil E7. Solenoid Kit with 220VAC Explosion-Proof CoilE8. Solenoid Kit with 110VAC, 50 Hz Explosion-Proof CoilE9. Solenoid Kit with 230VAC, 50 Hz Explosion-Proof Coil SP . Stroke Indicator PinsA1. Solenoid Kit with 12 VDC ATEX Compliant CoilA2. Solenoid Kit with 24 VDC ATEX Compliant CoilA3. Solenoid Kit with 110/120 VAC 50/60 Hz ATEX Compliant Coil A4. Solenoid Kit with 220/240 VAC 50/60 Hz ATEX Compliant CoilNOTE: See service manual for ATEX details.SP_DS_TemplateDataSheet_0817II 2II 2。

1040-100kg1040-100kg参数

Low Profile Single-Point Load CellFEATURES• Capacities: 2–15 kg • Aluminum construction• Single-point 350 x 350 mm platform • OIML R60• IP65 protection• Available with metric and UNC threads • Optional❍❍EEx ia IIC T4 hazardous area approval ❍❍FM approval available ❍❍IP67 protection availableAPPLICATIONS• Bench scales • Counting scales • Grocery scalesDESCRIPTIONModel 1030 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms.Its use in relatively large platforms, combined with high accuracy and low cost, makes this load cell ideally suitedfor a wide range of weighing applications, including bench scales, laboratory, money counting and process weighing.A special humidity resistant protective coating is available as an option which assures long-term reliability. Model 1030’s built in overload stop can provide mechanical protection against overloading.The two additional sense wires feed back the voltage reaching the load cell. Complete compensation ofchanges in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.Tedea-HuntleighModel 1030Low Profile Single-Point Load Cell(1)(2)2 kg is not OIML approved (3)IP67 available upon requestAll specifications subject to change without notice.WIRING SCHEMATIC DIAGRAM (Unbalanced bridge configuration)Vishay Precision GroupDisclaimerALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited to, the warranty expressed therein.Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group.The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.。

AREBOS 875公斤重量重型货架用户手册说明书

User’s Manual – AREBOS Heavy Duty Shelf 875 kg
Heavy Duty Shelf 875 kg
AR-HE-SLR07
Please follow all security measures in this user´s manual to ensure a secure use.
AR-HE-SLR02TG 70.87 x 35.43 x 15.75 in (180 x 90 x 40 cm) 1929 lbs (875 kg) 385.81 lbs (175 kg) galvanized metal MDF wood fiber board 5 0.0276 in (0.70 mm) 27.6 lbs (12,5 kg)
• If the connector tabs of the shelf cross pieces should bend on assembly, they can be bent back into their original position with the aid of a flat head screwdriver.
1.1 Symbols ......................................................... 3 1.2 General safety instructions ........................... 3
2. Technical Specifications ............................ 3 3. Assembly .................................................. 4

Engage

Ultimate Tensile Strength, MPa ASTM D-638 508 mm/min
6.5
21.8
6.4
24.5 25.8 24.8 12.9 28.9
21
1 Ultimate elongation for all grades exceeds 600%. 2 This grade is talc dusted; properties are measured before the addition of talc. 3 Engage® 8400 is available in the European region. Engage® 8407 is available in the Americas and Asia Pacific. 4 L-Low, M-Medium and H-High are DuPont Dow Elastomers measures. 5 DuPont Dow Method
ENR 7270
7380
ENR 72772
0.87
0.88
ENR 7256
0.885
5
< 0.5
0.8
2
ENR 7086 0.901
< 0.5
20
8
48
28
16
26
12
13
16
19
23
29
L
L
L
L
M
M
56
57
68
78
79
88
36
42
48
62
73
93
–56
–57
–52
–45
–45

Sikaflex

PRODUCT DATA SHEET Sikaflex®-271 PowerCureVersion 03.01 (04 - 2023), en_AU012001252710001000PRODUCT DATA SHEETSikaflex®-271 PowerCureAccelerated glazing adhesiveTYPICAL PRODUCT DATA (FURTHER VALUES SEE SAFETY DATA SHEET)Chemical base Polyurethane Colour (CQP001-1)BlackCure mechanism Moisture-curing A Density (uncured)1.2 kg/l Non-sag properties (CQP061-1)Very good Application temperature 5 ─ 40 °C Open time (CQP526-1)10 minutes B Early tensile lap-shear strength (CQP046-1)See table 1Shore A hardness (CQP023-1 / ISO 48-4)65Tensile strength (CQP036-1 / ISO 527)7 MPa Elongation at break (CQP036-1 / ISO 527)300 %Tear propagation resistance (CQP045-1 / ISO 34)10 N/mm Tensile lap-shear strength (CQP046-1 / ISO 4587) 5 MPa Service temperature (CQP509-1 / CQP513-1)-40 ─ 90 °C Shelf life9 monthsCQP = Corporate Quality Procedure A Provided by PowerCure B 23 °C / 50 % r.h.DESCRIPTIONSikaflex®-271 PowerCure is an accelerated elastic polyurethane adhesive for glazing and vehicle-glass-replacement applications. Suit-able for bonding materials relevant for direct glazing such as paints, glass, ceramic frits, painted and e-coated surfaces in commercial-vehicle production and repair.Curing of Sikaflex®-271 PowerCure is acceler-ated by Sika’s PowerCure technology which makes it largely independent of atmospheric conditions.PRODUCT BENEFITSAccelerated curing and adhesion build-up ▪Excellent application properties▪Ideal for glass replacement in commercial vehicles▪Low climate dependency of the curing speed with Sika® Booster ▪High mechanical strength ▪Solvent-free▪AREAS OF APPLICATIONSikaflex®-271 PowerCure is designed espe-cially for manual direct-glazing application, and vehicle-glass replacement in commercial vehicles. Thanks to the PowerCure Techno-logy Sikaflex®-271 PowerCure exhibits a fast strength and adhesion build-up.This product is suitable for experienced pro-fessional users only. Tests with actual sub-strates and conditions have to be performed to ensure adhesion and material compatibil-ity.1 / 2CURE MECHANISMSikaflex®-271 PowerCure cures by reaction with moisture provided by the accelerator paste and largely independent from atmo-spheric moisture. For typical strength build up data see table below.Time [h]Tensile lap-shear strength at23 °C [MPa]10.72 3.5Table 1: Strength build-up of Sikaflex®-271 PowerCure CHEMICAL RESISTANCESikaflex®-271 PowerCure is generally resistant to fresh water, seawater, diluted acids and di-luted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents.METHOD OF APPLICATIONSurface preparationSurfaces must be clean, dry and free from grease, oil and dust. Surface treatment de-pends on the specific nature of the substrates and is crucial for a long lasting bond. All pre-treatment steps must be confirmed by pre-liminary tests on original substrates consider-ing specific conditions in the assembly pro-cess.ApplicationSetup the PowerCure Dispenser according to the PowerCure User Manual. If the applica-tion is discontinued for more than 2 minutes, the mixer needs to be replaced.Sikaflex®-271 PowerCure can be processed between 5 °C and 40 °C, but changes in react-ivity as well as application properties need to be considered. The optimum temperature for substrate and adhesive is between 15 °C and 25 °C.The open time is significantly shorter in hotand humid climates. The parts must always bejoined within the open time. As a rule ofthumb, a change of + 10 °C reduces the opentime by half.To ensure a uniform thickness of the bondlineit is recommended to apply the adhesive inthe form of a triangular bead (see figure 1).Figure 1: Recommended bead configurationRemovalUncured Sikaflex®-271 PowerCure can be re-moved from tools and equipment with Sika®Remover-208 or another suitable solvent.Once cured, the material can only be re-moved mechanically. Hands and exposed skinhave to be washed immediately using handwipes such as Sika® Cleaner-350H or a suit-able industrial hand cleaner and water. Donot use solvents on skin.FURTHER INFORMATIONThe information herein is offered for generalguidance only. Advice on specific applicationsis available on request from the Technical De-partment of Sika Industry.Copies of the following publications are avail-able on request:Safety Data Sheets▪General GuidelinesBonding and Sealing with 1-componentSikaflex®▪PowerCure User Manual▪PowerCure Quick Reference Guide▪PACKAGING INFORMATIONPowerCure Pack600 mlBASIS OF PRODUCT DATAAll technical data stated in this document arebased on laboratory tests. Actual measureddata may vary due to circumstances beyondour control.HEALTH AND SAFETY INFORMATIONFor information and advice regarding trans-portation, handling, storage and disposal ofchemical products, users shall refer to the ac-tual Safety Data Sheets containing physical,ecological, toxicological and other safety-re-lated data.DISCLAIMERThe information, and, in particular, the re-commendations relating to the applicationand enduse of Sika products, are given ingood faith based on Sika's current knowledgeand experience of the products when prop-erly stored, handled and applied under nor-mal conditions in accordance with Sika's re-commendations. In practice, the differencesin materials, substrates and actual site condi-tions are such that no warranty in respect ofmerchantability or of fitness for a particularpurpose, nor any liability arising out of anylegal relationship whatsoever, can be inferredeither from this information, or from any writ-ten recommendations, or from any other ad-vice offered. The user of the product musttest the product's suitability for the intendedapplication and purpose. Sika reserves theright to change the properties of its products.The proprietary rights of third parties must beobserved. All orders are accepted subject toour current terms of sale and delivery. Usersmust always refer to the most recent issue ofthe local Product Data Sheet for the productconcerned, copies of which will be suppliedon request.PRODUCT DATA SHEET Sikaflex®-271 PowerCure Version 03.01 (04 - 2023), en_AU 012001252710001000Sika Australia Pty Limited ABN 12 001 342 329 Tel: 1300 22 33 482 / 2。

消防展泵信息整理

ZXF5180GXFJX60机场快速调动消防北京中卓时代车 ZXF5310GXFJX110专用地盘机场主力北京中卓时代泡沫消防车 ZXF5160GXFPM(SG)60/A型城市主战北京中卓时代消防车远程供水德国蓝特MC3000城市主战车 JP18D JP20 北京中卓时代肇庆瑞霖山推抚起山推抚起
消防车配套泵信息整理
序号 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 KSP1000 KSP1000 CB10/30-XZ CB20.10/30.60-RS CB20.10/20.40-RS CB20.10/30.60-RS CB20.10/30.60-RS CB20.10/30.60-RS CB20.10/30.60-RS CB20.10/40.80-RS CB10/100-RS HALE 增压水泵HALE 移动吸水泵泵型号流量（L/s） 220（副泵最大 250） 60 60 30 30/60 20/40 30/60 30/60 30/60 30/60 40/80 100 166.7 200 200 压力（Mpa） 1.5(副泵0.35) 1.0 1.0 1.0 2.0/1.0 2.0/1.0 2.0/1.0 2.0/1.0 2.0/1.0 2.0/1.0 2.0/1.0 1.0 1.0 1.0 0.4 扬程(m) 150（副泵35） 100 100 100 200/100 200/100 200/100 200/100 200/100 200/100 200/100 100 100 100 40 其他两栖多功能远程供水 AS5173GXFAP40型城市主战消防车厂家鞍山衡业鞍山衡业备注
ZXF5310GXFPM170型城市主战消防车北京中卓时代 ZXF5320JXFJP40举高喷射消防车 ZXF5380GXFPM180型泡沫消防车北京中卓时代北京中卓时代

德国百灵达产品参数

小型调音台UFX1604∙16通道模拟调音台，内置24/96火线音频接口∙8个XENYX话放，都带独立幻相供电开关∙16进4出火线音频接口∙支持MIDI走带控制的按钮，带背光∙100mm推子∙英式4段EQ，2个半参量EQ∙4个辅助发送/立体声返回，ALT 3-4总线，内置对讲话筒∙双通道多效果处理器∙可上机架QX-1202USB超低噪音（ULN) 电路，极大的动态余量，通透的音色8 个新颖的，录音棚级的―无形‖麦克风前置放大器：- 24 比特130 分贝动态范围，192 千赫采样率输入端-超大60 分贝增益范围内置24 比特数码立体声效果处理器，配有100 个音质优美的预置，如：混响，合唱，镶边，延迟，音高变动和各种多重效果所有声道配带有效的，音乐性极强的 2 频段均衡器，还配有削波二极发光管4 个平衡式线路输入端，动态余量充裕专业级4580 运算放大器, 超低噪音，极低失真度-- 要比4560 运算放大器好的多每路配有2 个辅助传送，1 前置推杆，适合监听使用；1 个后置推杆，适合内置效果或外置传送使用CD/磁带输入端可设置在主混音或控制室/耳机输出端上独立的控制室，耳机及立体声CD/磁带输出端平衡式主混音输出端，配有镀金卡侬连接插口提供+48 伏幻像电源开关，可使用电容话筒经久耐用的60 毫米流线型推杆和密封控制旋钮内置开关式电源(100 - 240 V ），使用灵活，具有无噪声，瞬间反应好，电耗低的特性高质量的元件和极其牢固的结构，使产品经久耐用德国百灵达研制设计X2442USB24 输入4/2 母线调音台, 配有XENYX 话放& 压缩器，英式均衡器，24 比特多种效果处理器，USB/音频界面和energyXT2 百灵达版音乐制作软件优质模拟调音台，超低噪音，大余量10 个技术新颖的XENYX 话筒前置放大器，配有幻象电源，可与单独的高级前置放大器媲美8个录音室级压缩器，配有简单的“一个按钮”功能和控制显示，打造一流的人声和乐器声新古典"英国式" 3 频段均衡器，配有半参数型中频，打造温暖的音色录音室级别效果处理器，配有16 种可编辑的预置，其中包括混响，合唱，镶边，延迟，变调，多重效果，节拍功能，用户参数设置可储存内置的立体声USB/音频插口可用来直接连接电脑。

输油泵KSY系列

业务手机： 15000616991 15026975965
目录
产品概述…………………………………………………………………………………………………………………………1 产品用途…………………………………………………………………………………………………………………………1 产品特点…………………………………………………………………………………………………………………………1 工作条件…………………………………………………………………………………………………………………………2 型号说明…………………………………………………………………………………………………………………………2 结构图……………………………………………………………………………………………………………………………3 泵旋转方向………………………………………………………………………………………………………………………4 型谱图 ………………………………………………………………………………………………………………………… 5 主要零件材料……………………………………………………………………………………………………………………6 订货须知…………………………………………………………………………………………………………………………6 KSY150-M(N)4 技术数据………………………………………………………………………………………………………7 KSY150-M(N)6 技术数据………………………………………………………………………………………………………9 KSY150-M(N)7 技术数据………………………………………………………………………………………………………11 KSY150-M(N)9 技术数据………………………………………………………………………………………………………13 KSY150-M(N)13技术数据………………………………………………………………………………………………………15 KSY200-M(N)4 技术数据………………………………………………………………………………………………………17 KSY200-M(N)5 技术数据………………………………………………………………………………………………………19 KSY200-M(N)6 技术数据………………………………………………………………………………………………………21 KSY200-M(N)8 技术数据………………………………………………………………………………………………………23 KSY200-M(N)9 技术数据………………………………………………………………………………………………………25 KSY200-M(N)12技术数据………………………………………………………………………………………………………27 KSY200-M(N)13技术数据………………………………………………………………………………………………………29 KSY200-M(N)19技术数据………………………………………………………………………………………………………31 KSY250-M(N)4 技术数据………………………………………………………………………………………………………33 KSY250-M(N)6 技术数据………………………………………………………………………………………………………35 KSY250-M(N)9 技术数据………………………………………………………………………………………………………37 KSY250-M(N)13技术数据………………………………………………………………………………………………………39 KSY300-M(N)3 技术数据………………………………………………………………………………………………………41 KSY300-M(N)4 技术数据………………………………………………………………………………………………………43 KSY300-M(N)6 技术数据………………………………………………………………………………………………………45 KSY300-M(N)9 技术数据………………………………………………………………………………………………………47 KSY300-M(N)13技术数据………………………………………………………………………………………………………49 KSY300-M(N)19技术数据………………………………………………………………………………………………………51 KSY350-M(N)4 技术数据………………………………………………………………………………………………………53 KSY350-M(N)6 技术数据………………………………………………………………………………………………………55 KSY350-M(N)9 技术数据………………………………………………………………………………………………………57 KSY350-M(N)13技术数据………………………………………………………………………………………………………59 KSY350-M(N)19技术数据………………………………………………………………………………………………………61 KSY400-M(N)6 技术数据………………………………………………………………………………………………………63 KSY400-M(N)9 技术数据………………………………………………………………………………………………………65 KSY400-M(N)13技术数据………………………………………………………………………………………………………67 KSY400-M(N)19技术数据………………………………………………………………………………………………………69 KSY450-M(N)9 技术数据………………………………………………………………………………………………………71 KSY450-M(N)13技术数据………………………………………………………………………………………………………73 KSY500-M(N)6 技术数据………………………………………………………………………………………………………75 KSY500-M(N)9 技术数据………………………………………………………………………………………………………77 KSY500-M(N)13技术数据………………………………………………………………………………………………………79 KSY500-M(N)19技术数据………………………………………………………………………………………………………81 KSY600-M(N)9 技术数据………………………………………………………………………………………………………83 KSY600-M(N)13技术数据………………………………………………………………………………………………………85 KSY600-M(N)19技术数据………………………………………………………………………………………………………87

网球运动中的专业装备推荐

网球运动中的专业装备推荐一、专业网球拍推荐在网球比赛中，选择一把适合自己的专业网球拍至关重要。

专业网球拍通常由碳纤维材料制成，具有更好的弹性和稳定性，能够帮助球员更好地控制球的方向和速度。

以下是几款我个人推荐的专业网球拍：1. Wilson Pro Staff RF97 Autograph这款网球拍是由网球传奇罗杰·费德勒亲自设计的，拥有较小的头部和较重的重量，适合那些喜欢发力的球员。

它的稳定性和控制性能非常出色，是许多专业球员的首选。

2. Babolat Pure DriveBabolat Pure Drive是一款经典的专业网球拍，拥有较大的头部和较轻的重量，适合那些喜欢快速挥拍的球员。

它的弹性和力量表现出色，能够帮助球员在比赛中发挥出最佳水平。

3. Head Graphene 360 Speed ProHead Graphene 360 Speed Pro是一款适合快速移动和灵活性强的球员使用的专业网球拍。

它采用了最新的碳纤维技术，具有出色的稳定性和控制性能，能够帮助球员在比赛中轻松击败对手。

二、专业网球鞋推荐除了选择合适的网球拍，选择一双适合自己的专业网球鞋也是非常重要的。

专业网球鞋通常具有良好的支撑性和抓地力，能够帮助球员在比赛中更好地移动和转身。

以下是几款我个人推荐的专业网球鞋：1. Nike Air Zoom Vapor XNike Air Zoom Vapor X是一款轻巧舒适的专业网球鞋，采用了最新的气垫技术，具有出色的缓震和支撑性能。

它的抓地力和稳定性非常出色，是许多专业球员的首选。

2. Adidas Adizero Ubersonic 3Adidas Adizero Ubersonic 3是一款适合速度型球员使用的专业网球鞋，具有轻盈的设计和优秀的灵活性。

它的鞋底采用了特殊的抓地纹路，能够在比赛中提供更好的抓地力和稳定性。

3. Asics Gel Resolution 8Asics Gel Resolution 8是一款适合喜欢稳定性和支撑性的球员使用的专业网球鞋。