印度斯坦流动控制系统用户手册说明书

INDUSTRIAL FLUID CONTROLS
Manufacturers of liquid level controls for overfill prevention.
Liquid terminal operations
Specifically designed Intrinsically safe Rugged Phase-Shift scale,up to 60"long.1/2"NPT connection.armor probe cable.open or shorted cable Tank Trucks,Marine Barges,Open and Close Dome
Spillguard A-210Automatic High Level Shutdown
Optional ground varification and tilt interlocks
GRADUATED SCALE
Spillguard A-200Automatic High Level Shutdown
Optional ground varification and tilt interlocks
Model A-100self-contained Battery operated
alarm.Up to 2500Hour battery life,high intensity visual and Outalarm TM
INDUSTRIAL FLUID CONTROLS
CINCINNATI, OHIO 45246 Model
Manufacturers of liquid level
prevention.
automation
SLIDING 3"
1/2"OD SHAFT 316SS,1/4"GRADUATIONS
GLAND 1/2"NPT
5/8"OD TIP
TEFLON
1/4"
SLIDING 3"
1/2"OD SHAFT 316SS,1/4"GRADUATIONS
GLAND 1/2"NPT
5/8"OD TIP
TEFLON
1/4"
A100-HT325
or firm flash.If the tight is Again,finger prevent ring has bumped to Test unit the battery is ok.flashes red..1.
Note:monitor.In the threshold off.
flash red.
FEATURES:
MODELA-100C
Totally self contained 3"
D D S
DESIGN SERVICES
ON
TEST
OFF
OUTALARM
60
59
SLIDING GLAND 1/2"NPT
-WARNING-
ALARM SELFCONTAINED use in loading tank cars,tank exposure,overloading.
Suitable for open conductive fluids.
HAS BEEN DESIGNED IN
ANSI/UL913GUIDELINES FOR IS SUITABLE FOR USE IN A,B,C,AND D HAZARDOUS OR REPLACE BATTERY IN REPLACE WITH TYPE U9V,EQUIVALENT 9V RECTANGULAR ANY SUBSTITUTION OF IMPAIR INTRINSIC SAFETY
FEATURES:
MODELA-100 CSS
Totally self contained 3"
D D S
DESIGN SERVICES
ON
TEST
OFF
OUTALARM
60
59
DESIGNED IN
GUIDELINES SUIITABLE FOR AND D BATTERY WITH 9V ANY COMPONENTS MAYIMPAIR HAS BEEN WITHANSI/UL913SAFETYAND IS GROUPS A,B,C,-WARNING-
OR REPLACE LOCATION.REPLACE 1604,OR EQUIVALENT ALKALINE BATTERY .ALARM SELFCONTAINED use in loading tank cars,tank exposure,overloading.
Suitable for closed SLIDING GLAND 316SS 1/2"NPT
liquid flash.9Vrectangular Again,has to Test battery is light.1.
red.
MODEL A-100C/CSS
FEATURES:
1990Automated Design Services,Inc.Printed in U.S.A.ADS,the ADS design,and OUTALARM are trademarks of AutomatedDesign Services,Inc.U.S.patent no.5,065,139.All rights reserved.
Totally self contained c 9/02
SELF CONTAINED use in loading HCl into tank exposure,overloading.
Suitable for closed 3"
GLAND TEFLON OD SHAFT HAST C-276,LASER ENGR.MODEL A-100H
MODEL A-100HCL
liquid flash.9Vrectangular Again,prevent has bumped to Test battery is light.1.
red.
MODELA100PRSHy-Lo
dome loading SELFCONT AINED
pressurizing or unloading of
.
FEA TURES:
T otally self contained
3"
5"
2.5"
4"
A100PRS Hy-Lo
Hand tight protective ring accidently bumped to Test the battery is ok.red.1.
Note:monitor .In the threshold off.
flash red.
R1
R2
LOCATION OF CALIBRATION
POTS,TOP VIEW
5"
3"
5/8"OD TIP
TEFLON
PRESS. SENSING PORT
1/2"OD SHAFT 316SS,1/4"GRADUATIONS
SLIDING GLAND 1/2"NPT
A-100 MONITOR
SELFCONTAINED use in loading
tank cars,tank overloading,
overpressure.FEATURES:
1990Automated Design Services,Inc.Printed in U.S.A.ADS,theADS design,and OUTALARM are trademarks ofAutomatedDesign Services,Inc.U.S.patent no.5,065,139.All rights reserved.
MODELA-110
Totally self contained c 1/4"
INDUSTRIAL FLUID CONTROLS
CINCINNATI, OHIO 45246 (513) 874-8499
LOCATION OF CALIBRATION TRIM POTS,TOP VIEW
The electronic pressure switch can be calibrated either as a direct acting or reverse acting single point switch, or as a dual set-point switch that can alarm within or outside of a gap via the two calibration trim The calibration procedures are as follow:
(Output goes from low to high at the set-point on increasing pressure)Trim pots are multi-turn (11 turns) with slip clutch at each end. When Setting to full CW or full CCW turn screw a minimum of 15 full turns in the appropriate direction.The trim pots are located in the top of the transducer electronic module labeled R-1R1
R2
INDUSTRIAL FLUID CONTROLS
TEST
OUTALARM
AUTOMATED DESIGN SUIITABLE COMPONENTS APPARATUS HAS BEEN WITHANSI/UL913INTRINSIC SAFETYAND IS I,DIV 1GROUPS HAZARDOUSAREAS.
-WARNING-
CASE OR REPLACE HAZARDOUS LOCATION.REPLACE 522,1604,OR EQUIVALENT RECTANGULAR ALKALINE BATTERY SUBSTITUTION OF
I N D U S T R I A L F L U I D C O N T R O L S
Industrial Fluid Controls Cincinnati, OH 45246 (513) 874-8499
A-210SPILLGUARD SYSTEM Manufacturers of liquid level
INDUSTRIAL FLUID CONTROLS
INDUSTRIAL FLUID CONTROLS
JOSEPH MODEL SENSOR
MODEL A200-PRB-316SS-XX
(XX =PROBE LENGTH IN INCHES)
INDUSTRIAL FLUID CONTROLS
CINCINNATI, OHIO 45246
INDUSTRIAL FLUID CONTROLS CINCINNATI, OHIO 45246
STAINLESS STEEL ARMORED CABLE STANDARD LENGTHS15,20,25FT. LENGTHS UP TO100FEET AVALIABLE
OUTER SHEATH WIRE TYPE
CABLE ENDS 304SS SPIRAL INTERLOCKING ARMOR
3/C SILVER PLATED COPPER,22AWG STRANDED PTFE INSULATION,36AWG SILVER PLATED COPPER BRAID,EXTRUDED JACKET
LATCHING XLR FEMALE GOLD PINS WITH CAPTIVE DUST
CAPS
INDUSTRIAL FLUID CONTROLS 45246 (513) 874-8499
OPTIONS AND
ACCESSORIES
NUT
LOCKING
WASHER
PACKING
FOLLOWER
COLLET
NUT
WASHER
INDUSTRIAL FLUID CONTROLS 45246 (513) 874-8499
NUT WASHER
NUT
LOCKING
COLLET
WASHER
PACKING
FOLLOWER
INDUSTRIAL CONTROLS INDUSTRIAL FLUID CONTROLS 45246 (513) 874-8499
EXISTING WIRING TO PLC
EXISTING WIRING TO LEVEL SENSOR CABLE RECEPTACLE
EXISTING LEVEL MODULE
NEW PB REMOVE THE PROTECTIVE BACKING FROM THE DOUBLE SIDED TAPE ON THE TIMING MODULE (ORANGE)AND FIRMLY PRESS ONTO THE LEFT SIDE OF THE
LEVEL MODULE (GRAY)SO THAT THE TOP OF THE TIMING MODULE IS EVEN WITH THE TOP OF THE LEVEL MODULE.
ATTACH TIMING MODULE
-CAUTION -WHEN SCREWING THE RESET SWITCH INTO THE HOUSING TAKE CARE NOT TO TWIST THE SWITCH WIRES.
BLK BLK
#18,8"LONG
JOSEPH MODEL A-200HIGH PRESSURE FITTING)
HEAVY DUTY 300LB.FITTING,3/4"NPT
SENSOR WITH STANDARD FITTING,½”NPT
INDUSTRIAL FLUID CONTROLS
CINCINNATI, OHIO 45246
A-200SPILLGUARD SYSTEM Manufacturers of liquid level controls for overfill prevention.
SPECIFICATIONS:
FEATURES:
ModelA-200high level
shutdown system for tank cars,tank trucks -Stainless steel armored cable,standard length 25ft.Other lengths available.
Cable connectors are designed for repeated mating and meet IP-65environmental specs.
--Tip sensitive proximity sensor.Works on all liquids with a dielectric constant >1.9
Insertion length 4"-60"adjustable via 1/2"NPT packing gland.Longer lengths available.Wetted materials 316SS,Teflon.Other materials available.
Sensor intrinsically safe for Class I,Div 1,Gr.A,B,C,&D hazardous areas Probe temperature range -40to +212Deg F.
-----NEMA 4X enclosure with factory sealed switches and relays suitable for Class I,Div.2hazardous areas TM
Spillguard in conjunction with supplied controller.
-Fail safe design.Trips in the event of open or shorted cable conductors,or loss of power.barges,ships ....Prevent spills,personnel exposure,overloading.Suitable for open and closed dome loading
the simple and economical solution.Single stage fail safe level control.Operator panel provides easy and friendly operation via heavy duty illuminated push button switches.NEMA 4X enclosure with hermetically sealed switches and relays suitable for Class I,Div 2Hazardous areas.Single point tip sensitive capacitance level probe,intrinsically safe for Class I,Div 1hazardous areas in conjunction with supplied controller.Adjustable probe insertion length via 1/2"NPT sliding fitting.Probe diameter 1/2"features a laser engraved graduated scale with 1/4"
graduations.Rugged corrosion and solvent resistant cable protected by a stainless steel interlocking armor sheath with heavy duty latching connectors at each end.Fail safe design trips in the event of a open or shorted cable or loss of power.Powered output for single stage valve control plus outputs for external horn and strobe light,and contact outputs for pump control.Built in annunciator with silence/acknowledge via the stop button.Setup mode allows system setup and testing prior to loading.Optional ground detector interlock prevents system from being reset if the vessel in not properly bonded to earth.
Probe max pressure 50psig standard fitting,300psig heavy duty fitting.
Open/close lighted pushbuttons,long life LED lamps.
---without purge.
Optional ground interlock prevents system from being reset if vessel is not properly bonded to ground (resistance from vessel to ground is 10ohms or less.Green "Ground OK"light provided with this option.INDUSTRIAL FLUID CONTROLS CINCINNATI, OHIO 45246
(513)874-8499
JOSEPH SENSOR
MODEL A200-PRB-316SS-XX
(XX =PROBE LENGTH IN INCHES)
MODEL (MUST BE USED WITH GROUND VERIFICATION OPTION)
HEAVY DUTY FITTING,3/4"NPT
INDUSTRIAL FLUID CONTROLS
CINCINNATI, OHIO 45246
LEVEL/PRESSURE
REV7/11/03
I N D U S T R I A L F L U I D C O N T R O L S
2001Automated Design Services,Inc.Printed in U.S.A.ADS,theADS design,and OUTALARM are trademarks ofAutomated Design Services,Inc.All rights reserved.
c 0903-1
LOCATING TAB
CAPACITANCE SENSOR TIP
TANK TRUCK SWIVEL MOUNT
1-1/4"NPT VENT CONNECTION
PRESSURE SWITCH
A -300-S P -1000A
B A T
C H G U A R
D S Y S T
E M
L O C A T I N G T A B
C A P A C I T A N C E S E N S O R T I P
T A N K T R U C K S W I V E L M O U N T
1-1/4"N P T V E N T C O N N E C T I O N
P R E S S U R E S W I T C H
C O N N E C T O R H E A D
L A S E R E N G R A V E D P R O B E R O D
C O N T R O L L E R
P R O B E -T O -C O N T R O L L E R C A B L E
C A B L E I N T E R F A C E J U N C T I O N B O X
P R E S S U R E S W I T C H C A B L E。