科隆TD_OPTIFLEX2200使用说明书
科隆TD_OPTIFLEX2200使用说明书
导波雷达(TDR )物位计外壳和传感器采用模块化设计,适合于不同的安装要求适用于液体和固体测量的通用型测量仪表符合 IEC61508 标准的 SIL2安全相关系统OPTIFLEX 2200 C/F• • •技术数据表1 仪表特性1.1 模块化 TDR 解决方案 1.2 概述 1.3 应用 1.4 导波天线的选型 1.5 测量原理 2 技术参数2.1 技术参数 2.2 最低供电电压 2.3 压力/法兰温度选型表 2.4 测量限制 2.5 尺寸和重量3 安装3.1 适用场合 3.2 仪表安装前对罐体的准备 3.2.1 安装管嘴通用信息 3.2.2 混凝土罐顶的安装要求 3.3 液体测量安装建议 3.3.1 通用要求 3.3.2 立管(导波管和旁通管)中的安装 3.4 固体测量安装建议 3.4.1 锥形料仓安装管嘴 4 电气连接4.1 电气安装:2 线制,回路供电 4.1.1 一体型 4.1.2 分体型 4.2 非防爆仪表 4.3 防爆危险区域认证 4.4 网络 4.4.1 通用信息 4.4.2 点能点网络连接 4.4.3 多支点网络连接5 订货代码5.1 订货代码............................................................................................................................3.......................................................................................................................................................5.......................................................................................................................................................7....................................................................................................................................8.. (9)..............................................................................................................................................10.......................................................................................................................................15...........................................................................................................................16..............................................................................................................................................17 (20)..............................................................................................................................................28....................................................................................................................28......................................................................................................................28..............................................................................................................30...............................................................................................................................31.....................................................................................................................................31............................................................................................32...............................................................................................................................34. (34).............................................................................................................35........................................................................................................................................35........................................................................................................................................35..........................................................................................................................................36...............................................................................................................................37.....................................................................................................................................................37.....................................................................................................................................37.........................................................................................................................37..............................................................................................................................................38. (39)2目录产品特点1.1模块化 TDR 解决方案本仪表采用 TDR 原理测量距离,物位,容积和质量。
2200系列公共驱动包装特殊功能说明书
2200 SERIES COMMON DRIVE PACKAGESpecial Capabilities Specification Sheet 975CottonwoodAve.,POBox20,Hartland,Wisconsin53029-0020,USA||***************COMMON DRIVE CONVEYOR SETUPUp to (4) conveyors can be coupled together and driven from a single gearmotor.• Conveyors move at same relative belt speed.• Creates single lanes for handling parts.• Wide parts or pallets can be carried by each conveyor to allow access from below.• Conveyors can be of different widths and lengths.Uses Standard 2200 Series End Drive Conveyors• Aluminum Extruded Frame with T-slot Construction• Sealed Ball Bearings• V-Guided and Non-V-Guided Belt Compatible• Rack and Pinion Belt Tensioning• Conveyor Widths: 1.75" to 24" wide• Conveyor Lengths: End Drive = 2' to 18' long• Belt Speeds: up to 264 ft/minSee Product Engineering Manual or for details.Common Drive Specifications• Drive up to (4) Conveyors from a Single Drive Gearmotor• Fixed Conveyor Locations• Load Capacity: Contact Factory for Details• Compatible with all Standard End Drive Gearmotor Mounting Packages• Includes Aluminum Extruded Conveyor Tie Bar Assembly with Belt Return Roller• Includes Common Drive Couplings and Guarding• Multiple Conveyor Spacing Options• 2" Belt Edge to Belt Edge• 3" Belt Edge to Belt Edge• 4.75" to 24" Belt Edge to Belt Edge1/4-20 T -N U T S6[52]C o m p a t i b l e w i t h a l l W +Profiles:• All 2200 Series profiles are applicable.See Product Engineering Manual or for details. •Belting:• All 2200 Series belting is applicable.• Finger Splice is preferred, plastic and metal clipper splices are available.See Product Engineering Manual or for details. •Mounting Packages & Gearmotors:• All 2200 Series mounting packages and gearmotors are applicable.See Product Engineering Manual or for details. •Support Stands:• All 2200 Series support stands are applicable.See Product Engineering Manual or for details. •EXPRESS INQUIRY FORM: GENERAL INFORMATIONAlong with completing the Express Inquiry form below, please complete the specific 2200 Series Common Drive Conveyor application questions on the next page to the best of your ability.ContactTechnicalSalesat1-800-259-1510(Press3)***************************************************.CONTACT INFORMATIONCompany: ____________________________________________________________ Date: ____________________ Name: _________________________________________________________________________________________ Phone: __________________________ Fax: ________________________ E-Mail: _________________________ Address: _______________________________________________________________________________________ City: ______________________________________ State: ____________ Zip: ___________________________PRODUCTDescription/Material: ______________________________________________________________________________ Dimensions:_____________________________________________________________________________________ Weight: ____________________________________ Total Weight to be Placed on Conveyor: ____________________ Temperature: ________________________________ Leading Edge Dimension: ______________________________ENVIRONMENTChemicals or Fluids Present: ________________________________________________________________________ Unusual Ambient Temperature Conditions: ______________________________________________________________ Other Concerns: __________________________________________________________________________________Complete individual conveyor specifications on page 6.EXPRESS INQUIRY FORM: GENERAL INFORMATIONPage may need to be copied to communicate multiple conveyorsFAX COMPLETED FORMS TO 800.369.2440 or 262.367.5827BELT SPEED CALCULATORHow to calculate minimum conveyor belt speed:(Part rate in parts per minute) x (part size in inches)12Example (30 parts per minute) x (6" dia. part) = 180 = 15 ft/min. Minimum Belt Speed12 12How to calculate conveyor belt speed incorporating a product spacing:(Part rate in parts per minute) x (desired part spacing in inches + part size in inches)12Example (30 parts per minute) x (6" dia part + 12" spacing between parts) = (30) x (18) = 540 = 45 ft/min. Belt Speed12 12 12Please highlight the conveyor, dimensions, belt flow and motor positions required.Belt Edge to Belt Edge Options:• 2"• 3"• 4.75" to 24"Note: Conveyors over 7' (2134mm) require additional tie-together brackets.。
LG2200操作手册(1)解析
1 前言LineGuard 电子型管线破裂检测系统,是一种安装在管线阀门处的自力式管线监控和管线破裂保护装置。
该装置能采集数据,能(就地和远距离)监控单个阀门执行机构。
LineGuard 2200产品由一套Fisher ROC300系列远距离操作控制器和FlashPAC流量管理硬件和固件组成。
一套两用户程序可提供LineGuard功能。
Fisher公司的Windows RocLink负责进行压力监控、数据记录和阀门控制;Daniel产业公司的SpectraCom负责Modbus信息处理。
可提供客户定义型显示器,对两种程序的运行进行配置和监控。
2功能说明LineGuard 2200装置可进行压力采样并根据压力采样进行压力和“压降速率(RoD)”计算。
LineGuard 2200能连续监控和检测某些压力条件和压降速率(Rod)条件。
这些条件分为“小”(Minor)事件条件和“大”(Major)事件条件,它们在本装置中可以进行配置。
当探测到这些事件时,LineGuard 2200能按常规的配置间隔保持“压力”和“RoD”记录。
如果“大”事件在可配置的“事件持续”时间里继续存在,LineGuard 2200装置就会驱动阀门关闭。
可以选择性地关闭阀门。
LineGuard 2200还能保存标明有日期和时间的“事件/报警”记录。
借助Daniel Modbus协议,通过LineGuard 2200可以实现所有外部通信。
3操作原理3.1 用户计算程序用户计算程序负责监控管线压力,计算压降速率(RoD),保持小事件和大事件记录和阀门控制。
3.2 管线压力监控对管线静压每5秒钟采样一次,并作为“当前压力”(Live Pressure)加以保存。
对“当前压力”按一个配置周期(称之为“平均采样周期”)进行平均,并作为“平均压力”(Average Pressure)加以保存。
“平均采样周期”(Average Sample Period)可在5秒到60秒之间按5秒间隔进行配置。
FL2200-型液相色谱仪标准操作规程
1.目的: 建立一个FL2200型液相色谱仪的标准操作规程, 以规范其操作。
2.范围: 本规程合用于本公司的FL2200型液相色谱仪标准操作。
3.职责:仪器操作者:负责该仪器的操作、清洁, 并及时向上级、计量管理员报告仪器的异常情况;仪器维护保养人: 负责仪器定期清洁、保养工作;计量管理员:负责维护该仪器的正常运营, 指导并协助培训仪器的操作、保养, 及时解决设备的异常情况。
4.操作程序:4.1: 基本规定4.1.1安装仪器的房间应通风良好,否则会引起中毒或不良刺激,也也许引起火灾,由于液相色谱仪所使用的溶剂大多是易燃且有毒的.4.1.2严禁在仪器附近吸烟,使用明火或其他火源,或安装其他任何发射或也许发射火花的设备,房间内应配备灭火装置或设备,以备紧急时防止火灾的发生.4.1.3房间内应配备自来水龙头或其他冲洗设备.假如溶剂进入眼睛或有毒溶剂溅到皮肤上,应立即用清洁的水冲洗.4.1.4避免在有腐蚀性气体或大量粉尘的地方安装本仪器,否则会影响仪器正常运转,并缩短仪器使用寿命.4.1.5实验室温度需控制在20℃左右,建议安装空调.4.1.6电源电压为交流220V,功率为200W;房间内有良好的接地线.4.2开机4.2.1开机前准备配制流动相,配好后用有机膜过滤并超声15分钟4.2.1.1配制乙腈:水=1:9;4.2.1.2配制乙腈:缓冲盐(称取2.18g辛烷磺酸钠和1.92柠檬酸溶解在1000ml娃哈哈水中)=1: 94.2.2打开泵、检测器和电脑, 启动工作站;设立检测样品所需的各种条件;点击新建,创建项目, 设立项目名称、样品名称、实验人等, 点下一步, 设定分析方法, 下一步, 设定仪器条件, 下一步, 设定检测器, 下一步, 设定仪器条件, 下一步, 项目创建结束, 完毕。
4.2.3上流动相停泵状态下→把不锈钢吸滤头放于10%乙腈水里→打开放空阀→点击“系统清洗”→5分钟后泵停止→关闭放空阀→按“泵启动”→10%乙腈水过渡20分钟→按“泵停止”→把不锈钢吸滤头放于流动相中→打开放空阀→点击系统清洗→5分钟后泵停止→关闭放空阀→点击“泵启动”→稳定30分钟→查看基线(点击工作站界面的开始, 然后立即点击取消)→等基线在此状态下成一稳定的直线, 说明已经走平→可直接进样。
Koden MDC 2200 2500系列多功能显示器操作手册说明书
09.01 Printed in JapanSafetyprecaution T o ensure proper and safe use of the equipment, please carefully read and follow the instructions in the Operation Manual.Tamagawa Office:2-13-24 Tamagawa, Ota-ku, Tokyo, 146-0095 Japan Tel: +81-3-3756-6501 Fax: +81-3-3756-6509Uenohara Office:5278 Uenohara, Uenohara-shi, Yamanashi, 409-0112 Japan Tel: +81-554-20-5860 Fax: +81-554-20-5875• Design and specifications are subject to change without notice.For details, please contact:www.koden-electronics.co.jp*****************************.jpMDC-2200 series / 2500 series12-inch / 15-inch Color LCDTrue trail functionThe display shows exact movement of other vessels like drawing tails, while land and buoys are shown as station-ary objects even while your vessel is moving.This makes it easy for you to distinguish moving from stationary objects.ATA with up to 50 targets as standardThe convenient ATA (Automatic Tracking Aid) function comes as standard.The latest movements of other vessels can be shown instantaneously in vector form and numeric form, ensur-ing safe navigation.If the automatic acquisition zone is set, the targets up to 50 entering the zone will be locked automatically.Map Overlay with C-Map chart (NT+ or NT MAX)C-Map chart NT+ or NT MAX (owner supplied) is overlaid on the radar screen to provide clear radar pictures of coastlines, buoys, and other fea-tures.**Even in Head-up mode, the chart fol-lows smoothly in accordance with change of the heading of vessel.Furthermore, waypoints, buoys, and hazardous targets can be overlaid for safer navigation.C-Map NT MAX “World Wide” back-ground chart is built-in as standard.**Basic chart information only. Extra features of C-Map such as photo indi-cation are not available.AIS interface up to 200 targets as optionWhen connected with an AIS receiver, the radar displays information on up to 200 targets including the vessel name, heading, and speed of each vessel with an AIS transmitter mounted.Wide VariationOffered with two display sizes, a 12-inch display with operation panel housed in a single compact case and a convenient two piece 15-inch unit with separate key-board for multiple installation locations. Both units have high-resolution XGA (1024 x 768) grade LCD, which is extraordinary for the 12-inch LCD display.Also you can select the Antenna-Scanner Unit from a wide variety of output powers and lengths to best fit your application or site circumstances.MDC-2200 / 2500 series are high performance and multi-function Radars with the essence of Koden’s latest technology.In all phases including accuracy, stability, and reliability, the series achieve the highest-grade in the market.High-end Radar series forming a class apart!Dual StationOne antenna can be operated from two displays. This is highly effective for navigation of a double ended vessel with bridges in the bow and stern.• 12-inch (The highest resolution of the class)MDC-2240: 4 kW,3 feet / 4 feet Open MDC-2260: 6 kW,4 feet / 6 feet Open MDC-2210:12 kW,4 feet / 6 feet Open MDC-2220:25 kW,6 feet / 9 feet Open • 15-inch MDC-2540: 4 kW,3 feet / 4 feet Open MDC-2560: 6 kW,4 feet / 6 feet Open MDC-2510:12 kW,4 feet / 6 feet Open MDC-2520:25 kW,6 feet / 9 feet Open。
KROHNE OPTIFLEX 2200 C F 导波雷达物位变送器NEPSI应用补充说明说明书
导波雷达(TDR)物位变送器适合储存和过程应用对于NEPSI应用的补充说明OPTIFLEX 2200 C/F补充说明© KROHNE 12/2018 - 4005402402 - AD NEPSI OPTIFLEX2200 zh R02内容212/2018 - 4005402402 - AD NEPSI OPTIFLEX2200 zh R021 通用安全信息31.1 文档范围.................................................................31.2 仪表说明.................................................................31.3 标准和认证...............................................................31.4 设备保护等级 (EPL)和粉尘区.. (4)1.4.1 Ex ia 和 Ex iaD-认证的仪表.................................................41.4.2 Ex d ia 和 Ex iaD tD-认证的仪表.. (4)1.5 NEPSI 铭牌 (5)2 安装72.1 注意事项 (7)2.1.1 常规注意事项................................................................72.1.2 静电放电.. (7)2.2 操作条件 (8)2.2.1 环境及法兰温度..............................................................82.2.2 粉尘应用场合的壳体表面最高温度.............................................142.2.3 过程压力. (14)3 电气连接153.1 注意....................................................................153.2 接线端子腔体 (15)3.2.1 如何打开接线端子腔体.......................................................153.2.2 如何关上接线端子腔 (17)3.3 端子拧紧力..............................................................173.4 等电位连接系统..........................................................183.5 Ex ia 和 Ex iaD 设备. (19)3.5.1 如何连接电气电缆...........................................................193.5.2 电路的最大本质安全值.......................................................193.5.3 电源电压...................................................................193.5.4 电气示意图.................................................................203.6 Ex d ia 和 Ex iaD tD 设备.. (21)3.6.1 常规注意事项...............................................................213.6.2 如何连接电气电缆...........................................................213.6.3 电源电压...................................................................223.6.4 电气示意图.................................................................224 启动245 服务255.1 周期性维护..............................................................255.2 保持仪表清洁............................................................255.3 制造商..................................................................255.4 仪器送返生产厂家.. (26)5.4.1 基本信息...................................................................265.4.2 送返仪器时附带的表格(可复印) (27)1312/2018 - 4005402402 - AD NEPSI OPTIFLEX2200 zh R021.1 文档范围这些指令只适用于防爆型的TDR 物位变送器。
2200系列传动带传输器说明书
High Speed Performance- Up to 122 mpmFast & Simple to UseOnline ConfiguratorIndustry-BestProduct Transfers Superior V-GuidedBelt TrackingLow Profi le, High Performance,Fabric & Modular Belt Conveyors2200 SERIESCONVEYORS0 SERIES2200 SERIES• 25 to 610 mm (widths)• 457 to 9144 mm (lengths)• Up to 91 kg• Up to 122 meters per minutePRODUCT SUMMARYStraightZ-FrameHorizontal to InclineNose-OverBELTING2200 SERIESPlastic ClipperAn optional plastic clipper splice is available for quick removal of belts or when conveyors are installed in tight spaces.Finger SpliceAll belts are available with a standard Thermoformed finger splice. This splice makes the belt continuous and isvirtually undetectable.Metal ClipperAn optional metal clipper splice is also available for quick removal of belts or when conveyors are installed in tightspaces.SplicingIn-House Fabrication Capability • Large Quantity of Stocked Materials • Continuous V-Guiding • Belt Splicing • RF Cleat Welding • Hole Punching• Micropitch Closed Mesh • Micropitch Open Mesh • Metalworking Closed Mesh • Metalworking Open Mesh• Metalworking CleatedMicropitch Closed MeshMetalworkingMetalworking Cleated• Precision Move • Precision Move CleatedPrecision MoveTiming Belt ConveyorsRack & Pinion Belt Tensioning Precise V-Guided BeltingUnique Precision Move Reverse V-Guiding• Flat Belt• Cleated BeltFlat BeltFlat Belt Cleated Flat Belt Cleated• 20, 30, 35, 40 and 50 mm HeightsSide Wall Cleat Belt• 20, 30 and 35 mm HeightsSide Wall Clea • 20, 30 andOPTIONS2200 SERIESMultiple Guiding Options • Low Side• Aluminum Side • Tool-less Adjustable • Adjustable Outboard • Extruded Plastic • And More!Center Drive End DriveCommon Drive StandsMultiple Stand Options• Fixed Height Support Stands • Adjustable Height Support Stands • And More!Mid DriveFrequency Converter Emergency Stop SwitchMotor Protection Switch Cleated Aluminum Side GuidingAdjustable Guiding8 mm Nose Bar Transfer Tails with belt speeds up to53 m/min Modular Belt FramesRugged open frame design for water and chemicaldrainage and air coolingModular BeltFabric Belt16 mm High Speed Nose Bar Transfer Tail with belt speedsup to 61 m/minBelted FramesDurable,hard anodized,aluminum frames. Single piece frames up to 305 mm wide. Multi-piece frames up to 610 mm wideMulti-pieceINDUSTRY LEADING TECHNOLOGYThe Benefi ts of a Dorner 2200 Series ConveyorLow Maintenance• Dorners Industry Best V-Guiding provides positive belt tracking, even under demanding side load applications • Precise rack and pinion belt tensioning allows for fast and simple tensioning • Sealed for life bearings reduces maintenance Time Saving • D orner’s online confi gurator engineers simple or complex conveyors to meet your needs in minutes • T he industry leading tool delivers a complete 3D CAD assembly model for instant validation of fi t • D orner provides the industry’s fastest lead times with conveyors shipping in as little as 3 business daysRack and Pinion Belt Tension• Patented rack and pinion tensioning provides a quick single point tension moving both sides of thetail evenly2200 SERIESAdjustable Angle LPZs• Sleek, low profi le Z-Frame Conveyors are ideal for product elevation changes and can easily adjust to fit machinery layoutSleek Frame Designs• Sturdy single piece frame construction with a universal T-Slot allows for fast and simple attachment of accessories and guiding with a variety of industryavailable hardwarePrecision Move• Provides accurate alignment of both time and distance to move products effi ciently in assembly automationapplicationsHigh Speed Nose Bar Transfers• 16 mm Nose Bar safely transfers small parts at speeds up to 61 m/min and features V-Guidedbelting for accurate belt trackingV-Guided Belt Tracking• The industries fi rst low profi le V-Guided conveyor, eliminates startup belt tracking and keeps the beltrunning straight10YEARWarrantyOnline Confi gurator© Dorner Mfg. Corp. 2020. All Rights Reserved. 851-821-EU-EN REV. B 0220WarrantyPartsServiceDorner GmbH – EuropeDorner – GermanyKarl-Heinz-Beckurts-Straße 752428 Jülich, Germany+49 (0) 2461/93767-0**********************Dorner – France8 rue des Frères Caudron 78140 Velizy-Villacoublay France+33 (0)1 84 73 24 27**********************Dorner – North & South AmericaDorner – U.S.A. Headquarters975 Cottonwood Ave Hartland, WI 53029, USA (800) 397-8664(262) 367-7600***************Dorner – Canada100-5515 North Service Road Burlington, Ontario L7L 6G6 Canada(289) 208-7306***************Dorner – Latin AmericaCarretera a Nogales #5297,Nave 11. Parque Industrial Nogales Zapopan, Jalisco C.P . 45222Mexico+52.33.30037400****************************Dorner – Asia128 Jalan Permatang Damar Laut, Bayan Lepas 11960 Penang, Malaysia+604-626-2948|********************。
2200D数字音频处理器操作手册
OPTIMOD-FM 2200数字音频处理器操作手册第一部分介绍1-3 OPTIMOD-FM 2200数字音频处理器1-4 2200的预置1-4 双波段结构1-5 保护限幅:Orban的解决方案1-6 输入/输出的配置1-7 OPTIMOD-FM 的安放位置1-7 有关发射电平和测量1-8 图1-1绝对峰值电平,功率和PPM读数1-9 调整设备1-10 质保,反馈OPTIMOD-FM 2200数字音频处理器OPTIMOD-FM 2200数字音频处理器是一个功能完整的调频广播用音频处理系统。
其中2200型配有模拟输入和输出。
2200-D型也包括数字输入和输出。
各个版本共有的特性如下:·通用调频发射机保护和音频处理.2200能方便与世界上任何一种常用的发射系统连接使用.·用户友好接口:一个简单的液晶显示器使设置、调整、编程变得非常容易。
前面板上的直方图显示处理器预置的功能。
按其中一个有清楚标记的软键,可以唤醒一个预置,修改处理过程,或者访问系统设置。
·内有八个工厂预置,都是基于Orban的双波段和保护限幅处理结构.这些预置可以被修改并加以保存.·八个用户预置用来储存用户自己的设置.·预加重只限于国际通用的50us,75us预加重曲线.预加重控制几乎不可能有可以听出的变化,它主要用于产生一个清晰、透亮的声音.·严格的过脉冲控制;过脉冲限于+0.3dB基于数字信号处理器(DSP)的立体声编码器产生的电路,不仅性能优异,高稳定度,而且采用全基带频谱控制.·遥控,通过光独立终端(可以节点盖工作·内置声调发生器,用于产生在任意系统中设置的快速、精确的电平。
其中的一个贝塞尔空声调用于校正调制度。
在2200中有两种不同种类的预置:工厂处理预置与用户预置。
八个工厂处理预置包括一个保护/限幅预置,双波段通用预置,以及六个其他从双波段结构衍生出来的预置。
2200系列传输带传送器搬运平台装配维护及零件手册说明书
For other service manuals visit our website at:/service_manuals.aspDORNER MFG. CORP .INSIDE THE USA OUTSIDE THE USA P .O. Box 20 • 975 Cottonwood Ave.TEL: 1-800-397-8664TEL: 262-367-7600Hartland, WI 53029-0020 USA FAX: 1-800-369-2440FAX: 262-367-5827851-467 Rev. CPulley Transfer Plates for 2200 Series ConveyorsInstallation, Maintenance & Parts ManualDorner Mfg. Corp.2851-467 Rev. CPulley Transfer Plates for 2200 Series ConveyorsTable of ContentsIntroduction......................................................................... 2Warnings - General Safety.................................................. 3Installation........................................................................... 4Required Tools................................................................. 4Pulley Transfer Plate Mounting....................................... 4Preventive Maintenance & Adjustment. (5)Required Tools................................................................. 5Cleaning............................................................................ 5Service Parts......................................................................... 5Return Policy (6)IntroductionUpon receipt of shipment:•Compare shipment with packing slip. Contact factory regarding discrepancies.•Inspect packages for shipping damage. Contact carrier regarding damage.•Accessories may be shipped loose. See accessory instruc-tions for installation.Dorner 2200 Series conveyors are covered by Patent Nos. 5174435, 5131529 and corresponding patents and patent applications in other countries.Dorner’s Limited Warranty applies.Dorner reserves the right to make changes at any time without notice or obligation.IMPORTANTSome illustrations may show guards removed. DO NOT operate equipment without guards.851-467 Rev. C3Dorner Mfg. Corp.Pulley Transfer Plates for 2200 Series ConveyorsWarnings - General SafetyA WARNINGThe safety alert symbol, black triangle with white exclamation, is used to alert you to potential personal injury hazards.Climbing, sitting, walking or riding on conveyor will cause severe injury.KEEP OFF CONVEYORS.DO NOT OPERATE CONVEYORS IN ANEXPLOSIVE ENVIRONMENT.A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.A WARNINGDorner cannot control the physicalinstallation and application of conveyors. Taking protective measures is the responsibility of the user.When conveyors are used in conjunction with other equipment or as part of a multiple conveyor system, CHECK FOR POTENTIAL PINCH POINTS and other mechanicalhazards before system start-up.A WARNINGExposed moving parts can cause severe injury.REPLACE ALL GUARDS BEFORE RUNNING CONVEYOR.A Use of transfer plate with high friction conveyor belt will cause severe injury.DO NOT use transfer plate with /03, /08, /55, /62, /64, or other high friction belts.Dorner Mfg. Corp.4851-467 Rev. CPulley Transfer Plates for 2200 Series ConveyorsInstallationRequired Tools•Hex key wrenches: 2.5 mm •Torque wrenchPulley Transfer Plate MountingIllustration References:1.Gather components (Figure 1).Figure 12.Locate assembly slot (Figure 2,item C) in conveyor head plates.Figure 23.Install transfer plate (Figure 3,item A) into assembly slot as shown in Figure 3.Figure 34.Insert two (2) set screws (Figure 4,item B) through access notches (D) and into transfer plate (A). Tighten to 28 in–lb (3 Nm).Figure 4Use of transfer plate with high friction conveyor belt will cause severe injury.DO NOT use transfer plate with /03, /08, /55, /62, /64, or other high friction belts.A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.A T ransfer PlateBM5 x 10 mm Set Screw (2x)BAC CADBBD851-467 Rev. C5Dorner Mfg. Corp.Pulley Transfer Plates for 2200 Series ConveyorsPreventive Maintenance & AdjustmentRequired Tools•Hex key wrenches: 2.5 mm •Torque wrenchCleaningPeriodically, remove two (2) set screws (Figure 5,item B) and remove transfer plate (A). Clean any debris frombetween plate and conveyor belt. Replace transfer plate (A).See steps 2 through 4.Figure 5Service PartsFigure 6A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.BANOTEFor replacement parts other than those shown on this page, contact an authorized Dorner Service Center or the factory.Item Part Number Part Description1241902T ransfer Plate 2” (51mm)241903T ransfer Plate 3” (76mm)241904T ransfer Plate 4” (102mm)241905T ransfer Plate 5” (127mm)241906T ransfer Plate 6” (152mm)241907T ransfer Plate 7” (178mm)241908T ransfer Plate 8” (203mm)241909T ransfer Plate 9” (229mm)241910T ransfer Plate 10” (254mm)241912T ransfer Plate 12” (305mm)241918T ransfer Plate 18” (457mm)241921T ransfer Plate 21” (533mm)241924T ransfer Plate 24” (610mm)2970510MSocket Head Set Screw Metric M5 x10mm12851-467 Rev. C Printed in U.S.A.Dorner Mfg. Corp. reserves the right to change or discontinue products without notice. Allproducts and services are covered inaccordance with our standard warranty. All rights reserved. © Dorner Mfg. Corp. 2006DORNER MFG. CORP.975 Cottonwood Ave., PO Box 20 Hartland, WI 53029-0020 USAUSATEL 1-800-397-8664 (USA)FAX 1-800-369-2440 (USA)Internet: Outside the USA:TEL 1-262-367-7600FAX 1-262-367-5827Return PolicyReturns must have prior written factory authorization or they will not be accepted. Items that are returned to Dorner without authorization will not be credited nor returned to the original sender. When calling for authorization, please have the following information ready for the Dorner factory representative or your local distributor:1. Name and address of customer.2. Dorner part number(s) of item(s) being returned.3. Reason for return.4. Customer's original order number used when ordering the item(s).5. Dorner or distributor invoice number.A representative will discuss action to be taken on the returned items and provide a Returned Goods Authorization number for reference.There will be a return charge on all new undamaged items returned for credit where Dorner was not at fault. Dorner is not responsible for return freight on such items.Conveyors and conveyor accessories Standard catalog conveyors 30%MPB Series, cleated and specialty belt conveyors 50%7400 & 7600 Series conveyors non-returnable items Engineered special products case by case Drives and accessories 30%Sanitary stand supports non-returnable items PartsStandard stock parts30%MPB, cleated and specialty beltsnon-returnable itemsReturns will not be accepted after 60 days from original invoice date.The return charge covers inspection, cleaning, disassembly, disposal and reissuing of components to inventory.If a replacement is needed prior to evaluation of returned item, a purchase order must be issued. Credit (if any) is issued only after return and evaluation is complete.Dorner has representatives throughout the world. Contact Dorner for the name of your local representative. Our Technical Sales, Catalog Sales and Service Teams will gladly help with your questions on Dorner products.For a copy of Dorner's Warranty, contact factory, distributor, service center or visit our website at .For replacement parts, contact an authorized Dorner Service Center or the factory.。
科隆M2000超声波流量计安全操作及保养规程
科隆M2000超声波流量计安全操作及保养规程前言科隆M2000超声波流量计是一种用于液体流量测量的高精度仪器,具有测量范围广、测量精度高、操作方便等优点。
为了确保M2000超声波流量计的长期正常运行和使用者的人身安全,本文总结了M2000超声波流量计的安全操作和保养规程。
安全操作规程1. 操作前的准备在使用M2000超声波流量计前,必须先了解并掌握仪器的操作规程,包括启动流量计、调整参数、增加电压及限制电流、设置初始值等内容。
在进行实际测量前,还应对仪器的相关性能和技术规程进行必要的了解。
2. 装置M2000超声波流量计在装置M2000超声波流量计时,必须按照说明书的要求进行正确的安装、拆卸、校准和测量操作,避免误差和误操作。
特别是在安装和拆卸M2000超声波流量计时,必须保护仪器中的传感器,避免碰撞或损坏。
3. 使用M2000超声波流量计在使用M2000超声波流量计时,必须远离高压线和高压设备,避免外界因素对仪器的影响。
同时,避免接触水或其他液体,尤其是有毒有害液体,避免对人体造成危害。
同时,在操作M2000超声波流量计时,要遵守以下注意事项:•操作人员必须具有必要的操作技能和从业资格,必须清楚了解超声波流量计的技术规范和安全标准;•在启动流量计前,要检查仪器和相关设备是否正常工作;•必须负责根据实际的测量条件,准确判断设备的可行性和性能,确保满足测量的精度和准确度;•对于超声波流量计的参数调整、电压限制和初始值选择等操作,必须遵照仪器说明书进行。
4. 停止使用M2000流量计使用M2000流量计过程中,如果不再需要测量,需先关闭超声波流量计电源,再拆下设备,并且拆卸过程中严格按照操作规程进行。
如有必要,还需清理设备内部的污垢、杂质等,保证设备内部清洁。
保养规程为了确保M2000超声波流量计的长期正常运行,必须遵守一定的保养规程。
1. 定期维护保养M2000超声波流量计使用一段时间后,会出现一些问题,例如传感器磨损、液位高度、测量精度等问题。
2200系列精密移动调配系统说明书
Innovative, Modular, Dual Belt Conveyor Pallet Systems for Assembly AutomationInnovative Timing Belt Conveyor Design Industry Best Pallet Transfer System Clean Room Class 100 CertifiedFast & Simple to Use Online Configurator 2200 SERIESPALLET SYSTEMS• Conveyor Load Capacity 500 lbs non-accumulating 250 lbs accumulated• Pallet capacity of 30 to 70 lbs• Speeds up to 114 ft/min (34 m/min)2200 SERIES PRECISION MOVE PALLET SYSTEMS• Widths: 160, 240, 320, 400, and 480 mm • Lengths: Up to 24' 7" (7500mm)• Dual belt conveyors with common drive module • 25mm wide 5mm pitch timing belt conveyor • Standard or static conductive belting available • Aluminum extruded frame with universal T-Slot • Quick belt change without conveyor removal• 160mm to 480mm• Industry compatible sizes and bushing locations • Static conductive pallet skirt• Square and rectangular sizes available• Pallets are sold as kits or completed assembliesLift & LocateLift & RotateLift & Transfer90 Degree Corner90 Degree Corner & MergeCushioned Pallet Stop (Non-cushioned also available)The Benefits of a Dorner 2200 Series Precision Move Pallet SystemInnovative Offering • Timing belt conveyors provide added load capacity in a small platform • Quick belt change without the need to remove conveyor from system • Pin Tracking System provides cost effective pallet traffic management Delivers Fast • D orner sets the industry standard for rapid delivery • C onveyors and automation modules available in 20 days or less Time Saving • Dorner’s online configurator engineers simple to complex configurations in minutes. • The industry leading tool delivers a complete 3D Assembly model for instant validation of fit• Adjustable height lift from center of conveyor • Provides 200 lbs of lift capability at 90psi • Accuracy of ± 0.002"• Lift and Rotate:• Pneumatic lift from center of conveyor• Pneumatic rotation with adjustable positioning • Rotation angle: 90 to 180 degrees adjustable • Includes cushioned lift stroke • Lift and Transfer:• Changes product orientation• Uses dual strand timing belt conveyors and pneumatic lift • 70 lbs load capacitySimple Powered Corner Modules• 90 Degree Corner:• Uses pin tracking in pallet• Maintains product orientation through the turn• Includes 24VDC drive mechanism to drive the pallet around the corner• 90 Degree Corner and Merge: • Uses pin tracking in pallet• Inside guide is mounted to pneumatic cylinders to transfer pallet around corner• Straight guide with pneumatic cylinder is mounted across perpendicular conveyor to guide pallets straight through the merge area• Includes 24VDC drive mechanism to drive the pallet around the cornerAccurate Pin Tracking System• Simple and cost effective method of tracking pallets through turns• Used on 90 Degree Corner and 90 Degree Corner &Merge ModulesLift & Rotate90 Degree Corner1X SeriesThe 1X Series Line is designed for small part handling and transfers where space is a premium.1X Series Family:• Flat Belt• Aluminum Frame • Widths to 10"• Loads to 15 lbs • Speeds up to 80 fpm 2X SeriesThe 2X Series Line isengineered for smallto medium sized parts,precision applicationsand flexible layouts.2X Series Family:• Flat Belt• Cleated Belt• Modular Belt• Precision Move• SmartFlex®• Aluminum Frame• Widths to 24"• Loads to 200 lbs• Speeds up to 400 fpm• Curves• Z-Frame Elevators3X SeriesThe 3X Series Line isdesigned for mediumto heavy sized parts,precision applications,bulk handling andflexible layouts.3X Series Family:• Flat Belt• Cleated Belt• Modular Belt• Flexible Chain• Precision Move• Aluminum Frame• Widths to 60"• Loads to 1000 lbs• Speeds up to 600 fpm• Curves• Z-Frame Elevators7X SeriesThe 7X Series StainlessSteel Line is engineeredfor small to heavyproduct requiring variouslevels of sanitary designandflexible layouts.7X Series Family:AquaPruf® + AquaGard®• Flat Belt• Cleated Belt• Modular Belt• Flexible Chain•Vertical Belt Technology• Stainless Steel Frame• Widths to 52"• Loads to 750 lbs• Speeds up to 400 fpm• Curves• Z-Frame Elevators NEED SOMETHING DIFFERENT?DORNER’S ENGINEERED SOLUTIONS GROUP PROVIDES EXACTLY WHAT YOU NEEDFOR YOUR SPECIFIC APPLICATION. FROM MODIFIED STANDARD CONVEYORS TOCOMPLETE CUSTOM DESIGNS.LOOKING FOR AFTER SALE SUPPORT?DORNER’S SERVICES TEAM PROVIDES COMPLETE SUPPORT FROM REPLACEMENTPARTS TO INSTALLATION AND MAINTENANCE SERVICES.© Dorner Mfg. Corp. 2017. All Rights Reserved. Made in the U.S.A. 851-794 Rev. A 3M - JBK - 041610YEAR Warranty。
OPTIFLEX 2200 C F简易操作手册
两线制导波雷达(TDR )物位仪表测量液体和浆液的距离、液位、体积,也适用于粉料和固体颗粒本文件根据以下文件编辑整理,如有更改,恕不通知。
MA_OPTIFLEX2200_en_130731_4000668002_R02.pdf简易操作手册OPTIFLEX 2200 C/F目录1开箱、交货范围 (3)2 安装要点 (3)3开盖与接线 (4)4就地显示和键盘操作 (5)5 菜单操作 (6)6 仪表安装时必需设置的内容(快速设置) (8)本手册是为现场接线、安装调试提供便捷途径。
详细内容请阅读随机光盘操作手册!1开箱、交货范围①转换器和天线②同轴套管,标配没有!③快速安装说明(英文版)④光盘(包含所有的文件)⑤开盖工具⑥保护帽,用于转换器维修时防止传感器顶部进水。
2 安装要点天线周围300mm半径内没有影响雷达波的机械结构件或受到物料冲刷,短节高度小于直径(h<d)。
3开盖与接线3.1 开盖取下外壳与前盖(或后盖)之间的紧固组件。
用开盖工具逆时针旋转前盖(或后盖),从刻度①---刻度②。
向上提出前盖(或后盖)③3.2接线3.2.1二线制4--20mA回路供电信号接线,信号地③,设备地④3.2.2分体型仪表传感器与转换器接线打开转换器与传感器盖子,用一根四芯帯屏蔽导线一一对应接线。
(防爆型仪表必须配科隆原厂导线)4就地显示和键盘操作正常显示状态设置显示状态①百分百显示⑤更新数据①菜单功能描述②显示内容:液位、距离等⑥测量值和单位②设置状态③报警信息⑦设备状态③菜单编号④位号⑧键盘面板按键定义:1号键2号键3号键4号键按键功能按键描述正常显示状态设置状态右键(1号键)进入仪表设置模式移动菜单编号的当前位可修改位回车键(2号键)切换显示值的单位确认所设置的参数向下键(3号键)光标向下,或调整参数值变小①修改或选择设置内容向上键(4号键)光标向上,或调整参数值变大①修改或选择设置内容①液位、距离、体积等切换请注意:按住4号键3秒钟,显示语言转换为英语。
OPTIFLEX1300,操作菜单
安装要求: • Microsoft® .NET Framework version 1.1 或更新的版本 • PACTware 3.0 • HART® 接口模块 (USB, RS232...) • Device Type Manager (当前版本为DTM Version 1.0.0.34)
可以在随机的的光盘中找到所需软件和安装指Leabharlann 。5.3.2 按键按
键
Esc 5
右键 回车键 下键
功
能
上键
退出(组合键) 同时按住右键和上键
5.3.3 帮助的显示
当你在管理员模式下,就地显示能帮助你来设定仪表。如果在30秒内不对按键做任何操作,仪表 会自动显示帮助信息。该帮助信息会解释当前所操作的菜单;同时按住右键和上键,即可退出帮 助信息。如果30秒内仍不对仪表进行操作,帮助信息会再次显示。
OPTIFLEX 1300 C SE 系列 操作手册
TDR原理物位仪表
OPTIFLEX 1300 C 可用于测量液体,浆料和固体的距离,物位,体积以及液体界面
OPTIFLEX 1300 C -L 可用于测量液体的距离,物位以及液体界面
5 启动
5.3 显示屏
5.3.1 就地显示布局
OOPPTTIIFFLLEEXX11330000CC
1 ! Installation Setup
2
Tank Height
4
Nozzle Height
Nozzle Diameter
Probe Length
> Blocking Distance
3
Detection Delay
Reference Offset 4
图 5-1: 就地显示布局图
2200 XL 系列传输带机器人说明书
Features & Specifications• Widths: 660, 711, 762, 813, 864 and 914 mm • Lengths: 650 mm to 3500 mm• Loads: Up to 50 kg depending on belt speed • Speeds: Up to 37 m/min • Frame height: 70 mm• Drive and idler roller size: 60 mm diameter • Belting Options: All 2200 Series standard and specialty belting options available• Standard and heavy load gearmotor options available• Compact, wide-width, belted conveyors fit into tight spaces and easily integrate with machinery and equipment• Featuring the 2200 Series design with sizes up to 914 mm wide and 3500 mm long • Sleek, 70 mm aluminum conveyor frame with universal T-Slot allows for fast andsimple attachment of accessories and guiding with a variety of industry available hardware • Precise V-guided belting for positive belttracking along the entire length of the conveyor • Patented rack and pinion belt tensioning system for quick and accurate belt maintenance2200 XL SERIES CONVEYORSRack and PinionAllows the tail section to be easily slid back forquick belt adjustments and removalDurable Wide-Width FramesInterlocking multi-section frame extrusionscreate robust and accurate framesOptions & Accessories• Fixed and adjustable height and single post support stands available• T op of belt heights ranging from 310 mm to 2250 mm with fixed foot and caster type stands available • Product guiding options include: Low Side, Aluminum Side, Adjustable Guiding and Tool-less Adjustable • Reference the 2200 Series Engineering Manual or for additional details and specificationsDimensions• Side Mount Package Standard• Contact factory for bottom and top mount optionsTransforming Conveyor Automation© Dorner Mfg. Corp. 2021. All Rights Reserved. 851-951-EU-EN 0421Dorner GmbH – EuropeDorner – GermanyKarl-Heinz-Beckurts-Straße 752428 Jülich, Germany+49 (0) 2461/93767-0 **********************Dorner – France8 rue des Frères Caudron 78140 Velizy-Villacoublay France+33 (0)1 84 73 24 27 **********************Dorner – North & South AmericaDorner – U.S.A. Headquarters975 Cottonwood Ave Hartland, WI 53029, USA (800) 397-8664(262) 367-7600***************Dorner – Canada100-5515 North Service Road Burlington, Ontario L7L 6G6 Canada(289) 208-7306***************Dorner – Latin AmericaCarretera a Nogales #5297,Nave 11. Parque Industrial Nogales Zapopan, Jalisco C.P . 45222Mexico+52.33.30037400****************************Dorner – Asia128 Jalan Permatang Damar Laut, Bayan Lepas 11960 Penang, Malaysia+604-626-2948|********************• Reference the 2200 Series Engineering Manual or for belt speed options and compatible gearmotors。
OPTIFLEX 2200 C DTM证书说明书
OPTIFLEX 2200 C
with the Prog ID : ha45d701_1_00.CDtmMain
Version: 1.3.3.3778
This certificate confirms that the device type as listed below has passed successfully the tests for Device Type Managers:
This certificate is assigned for the forgoing mentioned tested and supported device types according to the FDT Group document “Framework for testing and certification of DTM”.
Test report Nr: Date of Test: Tested device type: Version: dtmINSPECTOR version: Operating system:
Required communication protocol: Tested communication protocol: Style guide conformity tested on:
Jodoigne, December 30, 2014.
Katrien Peeters FDT Certification Office
Supported devices types for which this certificate is granted: / Supported operation systems types for which this certificate is granted: Windows 7 SP1 Windows XP 32bit SP3
2200系列托盘系统升级与D-Tools市场应用说明书
at 90psi
• Up to 2” above TOB to pallet
• Accuracy of ± 0.015“
bottom
• Compact hebs of lift capability • Great for operator stations
at 90psi • Accuracy of ± 0.002"
Pin Tracking
• Simple and cost effective method of tracking pallets through turns
• Used on all Corner and Merge Modules
90 Degree Corner
• Uses pin tracking in pallet • Maintains product orientation through the turn • Includes 24V Brushless DC drive mini-conveyor to drive the
– Lift Gates – Larger pallets – Higher load capacity – High capacity locate stations – Elevators
Pallet Systems DTools Example
Empty pallet return
3 ft
3 ft
L&L 3x
12’
Waiting Pallet 3x
400 x 400 pallet 20 lbs of product and fixture 50 FPM 39” TOB
Questions?
– Widths up to 640mm x 640mm – Heavy Load Corners – 180 Degree Tight Transfer Corner – Pallet Guide Plates – Low Profile Lift and Locate (ETO) – Elevators (ETO) – L&L 3 position sensor mount – Close transfer rollers (ETO) – Lift Gate (ETO)
TD20002型电子天平操作规程
钻井工程技术研究院设备仪器操作规程∙1∙TD20002型电子天平操作规程1 范围本标准规定了TD20002型电子天平的操作及维护保养程序。
本规程适用于TD20002型电子天平的操作。
2 引用标准下列标准包含的条文,通过在本标准中应用而构成为本标准的条文。
在标准出版时,所示版本均为有效。
所有标准都会被修订,使用本标准的各方应探讨、使用下列标准最新版本的可能性。
3 操作人员职责操作者应了解TD20002型电子天平的工作原理和功能,熟悉TD20002型电子天平的操作规程方可操作,严格执行操作规程,并做好相关记录。
4 操作规程4.1 设备名称:TD20002型电子天平4.2 设备规格及型号:TD20002型4.3 性能参数:测量范围:0~2000g最小读数:0.01g数显范围:0~2000g稳定时间:≤3s标准砝码:1000g 秤盘直径:120mm4.4 操作步骤4.4.1 开机前检查4.4.1.1 检查天平是否置于稳定的工作台上。
4.4.1.2 检查天平所置水平泡是否调整到中心位置。
4.4.2 操作步骤4.4.2.1 接通电源,打开开关,待天平稳定后,显示“0.00”为称量模式。
4.4.2.2 开机预热30min后,将称物置于秤盘上,即显示该物质的质量,待显示器左边“,”熄灭后,即表示称量已稳定。
4.4.2.3 若有容器,先将容器置于秤盘上,天平显示容器质量,按“去皮/自效”键后显示器显示“0.00”即已去掉皮重。
再置称物于容器中,即显示称量的质量。
4.4.2.4 称量完毕后,关闭开关,拔掉电源,清洁秤盘。
∙2∙TD20002型电子天平操作规程5 注意事项5.1 天平所置水平泡一定要调整到中心位置后才可进行称量。
5.2 使用前应按规定接通电源预热30min后达到最高准确度。
5.3 皮重和称物质量之和不得超过称量范围。
5.4 如果在空秤盘情况下显示偏离零点,应按“去皮/自效”键使显示回到零位再进行称量。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
导波雷达(TDR )物位计外壳和传感器采用模块化设计,适合于不同的安装要求适用于液体和固体测量的通用型测量仪表符合 IEC61508 标准的 SIL2安全相关系统OPTIFLEX 2200 C/F• • •技术数据表1 仪表特性1.1 模块化 TDR 解决方案 1.2 概述 1.3 应用 1.4 导波天线的选型 1.5 测量原理 2 技术参数2.1 技术参数 2.2 最低供电电压 2.3 压力/法兰温度选型表 2.4 测量限制 2.5 尺寸和重量3 安装3.1 适用场合 3.2 仪表安装前对罐体的准备 3.2.1 安装管嘴通用信息 3.2.2 混凝土罐顶的安装要求 3.3 液体测量安装建议 3.3.1 通用要求 3.3.2 立管(导波管和旁通管)中的安装 3.4 固体测量安装建议 3.4.1 锥形料仓安装管嘴 4 电气连接4.1 电气安装:2 线制,回路供电 4.1.1 一体型 4.1.2 分体型 4.2 非防爆仪表 4.3 防爆危险区域认证 4.4 网络 4.4.1 通用信息 4.4.2 点能点网络连接 4.4.3 多支点网络连接5 订货代码5.1 订货代码............................................................................................................................3.......................................................................................................................................................5.......................................................................................................................................................7....................................................................................................................................8.. (9)..............................................................................................................................................10.......................................................................................................................................15...........................................................................................................................16..............................................................................................................................................17 (20)..............................................................................................................................................28....................................................................................................................28......................................................................................................................28..............................................................................................................30...............................................................................................................................31.....................................................................................................................................31............................................................................................32...............................................................................................................................34. (34).............................................................................................................35........................................................................................................................................35........................................................................................................................................35..........................................................................................................................................36...............................................................................................................................37.....................................................................................................................................................37.....................................................................................................................................37.........................................................................................................................37..............................................................................................................................................38. (39)2目录产品特点1.1模块化 TDR 解决方案本仪表采用 TDR 原理测量距离,物位,容积和质量。
其模块化设计使其成为常规应用中的经济型和可靠性解决方案。
多种天线形式可选使其适用于广泛的应用分体安装,转换器和传感器最大距离可达 100 m / 328 ft墙挂安装板水平 / 垂直安装的外壳和多种天线的选项保证仪表适合多种应用工况和安装位置外壳采用铝或不锈钢材质二线制仪表可选带四个按键的液晶显示 3亮点• 2 线制回路供电 HART ® TDR 雷达物位计适用于液体和固体DPR (动态干扰抑制):软件动态消除由环境干扰和介质堆积造成的虚假反射水平/垂直的外壳保证仪表适合所有的安装快速连接系统允许转换器外壳在线拆除或 360° 旋转以便容易读数显示插拔式外壳盖易于外壳快速开合,使用寿命长分体转换器和天线最大距离可达 100m/ 328ft 无需开盖,直接按键操作量程可达 40 m / 130ft转换器与所有的 KROHNE TDR 雷达物位计 BM 100 A, BM 102 和 OPTIFLEX 1300 C 兼容符合 IEC61508 SIL2 安全相关系统• • • • • •• • • 适用行业• 化工 & 石化油气冶金矿山水 & 污水纸浆 & 造纸食品 & 饮料制药能源• • • • • • •应用•反应罐中各种化学品液位测量储罐液体容积测量•4产品特点1.2概述OPTIFLEX 2200C - 一体 / 垂直式•转换器与过程连接垂直。