55t汽车起重机参数(XCT55L6)
GTC-550 55吨筒架式拖钩吊车巧克力数据说明书
GTC-55055 Ton Telescopic Boom Crawler CraneGENERAL DATACRANE CAPACITY55 ton at 8 feet(50t at 2.5m)BOOM4-section36’ 1” – 113’ 10”(11.0 m – 34.7 m)DIMENSIONOverall Length43’ 0” (13.2 m)Overall Width (tracks extended)17’ 1” (5.20 m)Overall Width (tracks retracted, std cwt)11’ 5” (3.48 m)Overall Height (working)12’ 1” (3.69 m)MASSGross Vehicle Mass (Standard Equipment Package)103,900lb (47,128 kg)Maximum Counterweight Standard CWT=17,400 lb (7893 kg)Optional Heavy CWT =28,200lb (12791kg) PERFORMANCETravel Speed0.8 mph (1.3 km/hr)/1.8 mph (2.9 km/hr) Gradeability85%CRANE SPECIFICATIONMODEL CAPACITYGTC-550 55 ton at 8 feet (50t at 2.5m)BOOM4-section full power telescoping boom with 2 extension modes. System consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables.•R etracted Length: 36’ 1” (11.0m)•E xtended Length: 113’ 10” (34.7 m) • Extension Time: 114s•E levating Angles: -1.5° to 80.5°•Elevating Time: 70 s•M ax Lifting Height: 111’ 1” (33.9 m)•B oom Head: Six, 14.7 inch (373 mm) diameter main sheaves on heavy-duty roller bearings. Two, 14.7 inch (373 mm) diameter lead in sheaves on heavy-duty roller bearings. Designed for quick reeving of head and load block.AUXILIARY BOOM HEAD COUNTERWEIGHT2 piece Standard counterweight design. Two upper counterweight configurations•S tandard Configuration = 17,400lb (7893 kg)•O ptional Heavy Configuration = 28,200lb (12,791 kg) WINCHESPlanetary geared two-speed winch includes a hydraulic motor, multi- disc internal brake and counterbalance valve. Drum rotation indicator is included•M ain Wincho Rope Diameter and Length: 5/8 in x 615 ft (16mm x 187m)o Single line pull: 13,311lb (59.2 kN) (first layer)o Single line speed: 347 ft/min (105.8 m/min) (4th layer)• A uxiliary Wincho Rope Diameter and Length: 5/8 in x 350 ft (16mm x 107m)o Single line pull: 13,311lb (59.2 kN) (first layer)o Single line speed: 347 ft/min (105.8 m/min) (4th layer) TRAVELEach side frame contains a two-speed track drive with hydraulic axial piston motor and parking brake. Travel system provides skid steering and counter rotation.•T ravel speed - Low: 0.8 mph (1.3 km/hr) High: 1.8 mph (2.9 km/hr)•G radeability (unladen): 85%•U nladen Ground Pressure: 9.3 psi (0.65 kg/cm2)SWINGGear motor driving a planetary gear reducer with a shaft mounted pinion, external gear shear ball slew bearing bolted to the superstructure and the carbody allows the superstructure to rotate 360°•S wing Speed: 0 - 2.0 rpm•S wing Parking Brake: Spring applied failsafe brake with hydraulic release that is controlled from the operators cab•S wing Service Brake: Hydraulically applied, controlled through foot actuated pedal•H ouse Lock Systemo2-position house lock (boom over front or rear). Actuated from the operator’s cab.LOAD MOMENT INDICATORTADANO AML-C Rated Capacity Limiter and Anti-Two Block system •O PTI-WIDTH™ - OPTIMAL lifting performance at any track WIDTH •C ontrol function shutdown. Audible and visual warnings•L CD screen provides a continuous display of working boom length, boom angle, working load radius, tip height, swing position, parts- of-line (operator set), machine track configuration, relative load moment, maximum permissible load and actual load.SPECIFICATION SHEET NO. TMC-DI-734-23 06/20FRAMEThe frame is an all-steel, welded structure, precision machined to accept attachment of the boom and swing components. OPERATORS CABFully-enclosed, air conditioned all-steel modular cab with lockable sliding door, acoustical lining, anti-slip floor and tinted safety glass.• C ab tilts 20°.• R ear view, winch view and right side view video cameras• T hree remote control work lights.• V ent window in the rear of the cab.• G rab bars and steps are located for easy access to the cab.• D efroster, heater, circulating fan• 2-speed windshield wiper, top glass wiper• S ix-way adjustable fabric seat with headrest, seat belt• D ome light• D ry-chemical fire extinguisher• F our-way electronic armrest mounted joysticks control swing, main winch, auxiliary winch, boom hoist and boom extend. Foot pedals control the travel and swing service brake functions. Swing brake pedal is hydraulic.• S electable modes for Fine Control and Travel. Travel function can be operated by foot pedals or joystick.• S eat termination switch immediately disable all hydraulic functions as the operator rises from the seat. Functions can also be disabled by switch on console.• D ash instrumentation: tachometer, hour meter, fuel gauge, and DEF level gauge. Indicators are provided for crane level, swing position, load moment, drum rotation, air filter restriction, engine oil temperature and pressure, hydraulic oil temperature and level, and hydraulic and air filter restriction, and low voltage.ENGINE• M ake/ Model: Cummins QSB6.7• T ype: 6 Cylinder, Water cooled, 4 Cycle• A spiration: Turbocharged and Aftercooled• M ax.Output: 260 hp (194 kW) @ 2200 RPM• M ax Torque: 730 Lb-ft (990 Nm) @ 1500 RPM• P iston Disp: 6.7 L• E mission Cert: U.S. EPA Tier 4f, Euromot Stage IV• A lternator: 70 ampELECTRICAL SYSTEM24 VDCFUEL SYSTEM• C apacity: 85 gallon (321 liter)• F iltration: Inline fuel/water separator and engine mounted fuel filter SIDE FRAMESTwo welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab.• T rack Rollers: Three top and twelve bottom sealed rollers on each track frame Idler: Oil filled, self lubricating with spring type tensioner HYDRAULIC SYSTEM• H ydraulic Pumps: Two high pressure, variable axial piston pumps with load sense and power limiting control for crane functions. One gear pump for cooling loop.• D irectional Valves: Multiple pressure and flow compensated valves with integrated relief valves controlled by electrical signals.• P ump output: 154 gpm (582 l/min) @ 2200 RPM engine speed. 5,000 psi (345 bar) maximum pressure• R eservoir: 185 gallon (700 liter) capacity, filler/ breather, sight gauge, cleanout, and sump drain.• F iltration: Three 5 micron, full flow tank mounted return filters with electrical clogging indicator. Two 2 micron pilot oil in-line pressure filters• D iagnostic Ports: Provided for system, load sense, and pilot pressure BI-FOLD JIB• M ain jibo Total Length: 28.9 ft (8.8m) o Offset Angles: 5°, 25° & 45°o Max. Lifting Height: 140.7 ft (42.9 m)• F ly jibo Total Length: 49.9 ft (15.2m) o Offset Angles: 5°, 25° & 45°o Max. Lifting Height: 161.0 ft (49.1m)OPTIONAL EQUIPMENT• H ook blockso 55 ton (50t) quick reeve hook block – Six, 16.1 in (410mm) steelsheaves, swivel hook and safety latcho 33 ton (30t) – Three, 16.1 in (410mm) steel sheaves, swivel hook and safety latch• O verhaul ball – 7.7 ton (7t) with swivel hook & safety latch• 360 degree house lock. Actuated from the operator’s cab.• T rack Shoes: 35.4 inch (900 mm) 3-bar semi grouser• A uger: Hydraulic auger boom package includes auger motor, hoses, fasteners, and stowage bracket assembly mounted to the 2nd stage section of boom for variable radius drilling.• T ool Circuit: Provides 5 gpm (23 l/min) and 10 gpm (45 l/min) at 2,500 PSI (176 bar) through a 50 foot (15.2m) twin hose reel with quick disconnect fittings to operate open center tools.• H igh Flow Tool Circuit: Provides 45 gpm (170 l/min) at 4800 PSI • (330 bar)• C ontrolled Free Fall Hoists: Winches are available in controlled free fall configurations.• C old Weather Packages: Cold weather options are available for operation to -40°C (Consult factory for application support)• W ork Platform: Model WP750 – 36 in x 72 in (0.9m x 1.8m) , all steel, welded, two person platform with maximum capacity of 750 lbs (340 kg).• F ull function Radio remote control package.• B oom mounted anemometer with cab display• A utomatic Central lubrication system.WINCH PERFORMANCE AND MACHINE WEIGHTSOVERALL CRANE DIMENSIONSTRANSPORT DIMENSIONS, JIB AND CWT DIMENSIONSWORKING RANGE DIAGRAMLOAD CHARTS36.149.062.075.087.9100.9113.88110.2101.582.8810101.497.182.840.0101291.487.378.740.036.6121579.475.869.040.036.536.1152053.050.949.640.036.434.631.7202536.837.938.335.335.933.627.4253028.428.928.426.827.224.1303522.322.823.120.921.321.4354018.118.518.916.817.717.4404515.415.714.215.114.4455013.113.412.912.712.0505511.511.610.810.155609.910.19.38.460658.78.87.97.165707.7 6.7 5.97075 6.7 5.8 5.07580 6.04.9 4.18085 4.2 3.48590 3.62.89095 2.295100 1.7100105*105110110Parts of Line121086444Parts of LineALL LOADS IN lb x 1000MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°UP to 0.5° SLOPE17,400 lb COUNTERWEIGHTRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)LOAD CHARTS36.149.062.075.087.9100.9113.88110.2101.582.8810101.497.182.840.0101291.487.378.740.036.6121579.475.869.040.036.536.1152063.861.956.640.036.434.631.7202545.644.143.040.036.433.627.4253035.335.732.931.628.924.1303528.028.425.826.525.321.5354022.923.323.021.521.819.3404519.619.917.918.217.5455016.717.015.115.415.6505514.712.813.313.4556012.911.012.211.6606511.49.810.810.165709.19.58.970758.48.47.775807.97.5 6.78085 6.6 5.88590 5.85.09095 4.395100 3.7100105 3.2105110110Parts of Line121086444Parts of LineRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)ALL LOADS IN lb x 1000MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°UP to 0.5° SLOPE28,200 lb COUNTERWEIGHTLOAD CHARTS36.149.062.075.087.9100.9113.88110.2101.552.7810101.497.152.740.7101288.877.152.740.032.6121565.157.551.840.032.628.7152043.840.338.834.632.624.820.9202532.331.029.828.725.224.020.9253024.323.522.919.919.418.9303519.719.218.716.016.815.5354016.616.015.714.414.012.9404513.613.413.011.910.8455011.811.611.310.19.0505510.19.98.67.655608.88.67.4 6.460657.87.6 6.3 5.36570 6.7 5.4 4.57075 5.9 4.7 3.77580 5.44.0 3.08085 3.5 2.58590 3.02.09095 1.595100*100105*105110110Parts of Line121086444Parts of LineRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)ALL LOADS IN lb x 1000MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°UP to 4° SLOPE17,400 lb COUNTERWEIGHTLOAD CHARTS36.149.062.075.087.9100.9113.88110.2101.582.8810101.497.182.840.0101291.487.378.740.036.6121579.475.869.040.036.536.1152054.953.051.740.036.434.631.7202537.738.838.836.236.433.627.4253029.129.628.427.527.824.1303522.923.323.721.521.821.5354018.619.019.317.317.717.9404515.816.114.215.514.7455013.413.712.913.112.4505511.811.711.110.5556010.210.49.69.060659.09.18.37.765708.07.2 6.670757.1 6.3 5.77580 6.35.5 4.98085 4.9 4.38590 4.33.79095 3.195100 2.6100105 2.1105110110Parts of Line121086444Parts of LineRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)ALL LOADS IN lb x 1000MAIN BOOM with TRACKS RETRACTED ‐ OVER FRONTUP to 0.5° SLOPE17,400 lb COUNTERWEIGHTLOAD CHARTS36.149.062.075.087.9100.9113.88110.2101.582.8810101.493.082.155.1101271.866.061.440.040.0121548.344.641.840.036.536.5152029.530.430.530.426.527.224.2202520.121.221.521.621.520.017.9253015.616.016.216.214.913.6303511.812.212.612.611.410.435409.19.69.910.08.97.940457.67.98.0 6.9 6.04550 6.06.3 6.5 5.4 4.65055 5.1 5.2 4.2 3.45560 4.1 4.2 3.2 2.46065 3.33.4 2.4 1.66570 2.7 1.7*7075 2.1**7580 1.7**8085**8590**9095*95100*100105*105110110Parts of Line121086444Parts of LineALL LOADS IN lb x 1000MAIN BOOM with TRACKS FULLY EXTENDED ‐ 360°UP to 1.5° SLOPE0 lb COUNTERWEIGHTRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)LOAD CHARTS36.149.062.075.087.9100.9113.88110.2**81086.379.871.3*101264.360.056.440.034.7121545.843.040.840.036.535.7152029.930.330.129.926.926.824.2202521.522.122.222.222.020.518.5253016.917.117.217.216.114.6303513.413.613.813.812.811.7354010.911.111.311.310.49.540459.29.49.48.67.745507.77.97.97.1 6.35055 6.7 6.7 6.0 5.25560 5.7 5.8 5.0 4.36065 4.94.9 4.2 3.56570 4.3 3.5 2.87075 3.7 2.9 2.17580 3.22.2*8085 1.7*8590**9095*95100*100105*105110110Parts of Line121086444Parts of LineALL LOADS IN lb x 1000MAIN BOOM with TRACKS FULLY RETRACTED ‐ OVER SIDEUP to 1.5° SLOPE17,400 lb COUNTERWEIGHTRadius (ft)MAIN BOOM LENGTH (ft)Radius (ft)LOAD CHARTS5°25°45°5°25°45°5°25°45°5°25°45°5°25°45°1010.9101210.9121510.910.9152010.97.910.910.920259.67.210.97.910.910.925308.4 6.4 5.110.77.3 5.510.97.810.910.930357.5 5.8 4.89.6 6.8 5.210.97.310.97.510.93540 6.5 5.2 4.58.8 6.3 4.910.37.0 5.210.97.2 5.210.97.34045 5.8 4.9 4.38.0 5.9 4.79.5 6.6 5.010.1 6.8 5.110.37.0 5.14550 5.2 4.5 4.37.4 5.5 4.68.6 6.2 4.89.1 6.5 4.99.4 6.7 5.05055 4.74.36.7 5.2 4.47.8 5.8 4.78.3 6.1 4.88.7 6.3 4.95560 6.1 4.9 4.37.1 5.6 4.57.6 5.8 4.78.0 6.1 4.76065 5.6 4.7 4.36.5 5.3 4.47.0 5.6 4.57.3 5.8 4.66570 5.2 4.5 5.9 5.1 4.3 6.5 5.4 4.5 6.1 5.6 4.57075 4.9 4.4 5.4 4.9 4.3 5.8 5.1 4.4 5.0 5.4 4.47580 4.64.35.0 4.7 4.2 4.9 5.0 4.3 4.1 4.9 4.48085 4.6 4.6 4.24.1 4.7 4.3 3.4 4.0 4.38590 4.3 4.3 3.4 3.9 4.2 2.7 3.2 3.69095 3.7 4.0 2.8 3.2 3.42.1 2.6 2.9951003.2 3.4 2.3 2.6 1.5 2.0 2.2100105 2.7 2.81.82.1 1.0 1.4 1.6105110 2.21.3 1.50.60.91101150.9 1.1*0.51151200.6**120125**125130*130135*135140140Parts of Line111111111111111Parts of Line100.9113.8Radius (ft)MAIN BOOM LENGTH (ft)Radius (ft)36.162.087.9ALL LOADS IN lb x 100028.9 ft Jib with TRACKS FULLY EXTENDED ‐ 360°UP to 0.5° SLOPE17,400 lb COUNTERWEIGHTLOAD CHARTS5°25°45°5°25°45°5°25°45°5°25°45°5°25°45°10101212158.715208.27.920257.07.92530 5.87.37.27.03035 5.0 3.7 6.47.27.0 6.73540 4.3 3.3 5.6 3.7 6.77.0 6.74045 3.8 3.0 2.5 5.0 3.4 6.0 3.6 6.4 3.7 6.74550 3.4 2.8 2.3 4.5 3.2 2.5 5.4 3.4 5.8 3.5 6.2 3.65055 3.1 2.6 2.2 4.1 3.0 2.4 4.9 3.2 2.4 5.3 3.3 5.6 3.45560 2.8 2.4 2.1 3.7 2.8 2.2 4.5 3.0 2.3 4.9 3.2 2.4 5.2 3.26065 2.5 2.2 2.0 3.4 2.6 2.2 4.1 2.9 2.3 4.5 3.0 2.3 4.8 3.1 2.36570 2.3 2.1 2.03.1 2.5 2.1 3.8 2.7 2.24.1 2.9 2.2 4.5 3.0 2.27075 2.2 2.02.9 2.3 2.03.5 2.6 2.1 3.9 2.7 2.24.2 2.8 2.27580 2.02.7 2.2 2.03.3 2.5 2.1 3.6 2.6 2.1 3.9 2.7 2.18085 2.5 2.1 1.9 3.1 2.4 2.0 3.4 2.5 2.1 3.7 2.6 2.18590 2.4 2.1 1.92.9 2.3 2.03.2 2.4 2.0 3.5 2.5 2.19095 2.2 2.0 2.8 2.2 2.0 3.0 2.3 2.0 3.0 2.4 2.095100 2.1 2.02.6 2.1 1.9 2.9 2.2 2.0 2.4 2.4 2.0100105 2.02.5 2.1 1.9 2.6 2.2 1.9 1.9 2.3 2.0105110 2.4 2.0 1.92.2 2.1 1.9 1.5 2.2 1.9110115 2.2 2.0 1.8 2.1 1.9 1.1 1.7 1.9115120 2.2 2.0 1.4 1.8 1.90.7 1.2 1.5120125 1.9 2.01.1 1.40.30.8 1.1125130 1.60.7 1.0*0.40.61301350.40.6**135140***140145**145150**150155*155Parts of Line111111111111111Parts of Line100.9113.8Radius (ft)MAIN BOOM LENGTH (ft)Radius (ft)36.162.087.9ALL LOADS IN lb x 100049.9 ft Jib with TRACKS FULLY EXTENDED ‐ 360°UP to 0.5° SLOPE17,400 lb COUNTERWEIGHTWP750 WORK PLATFORM ON MAIN BOOM RANGE CHARTFOR MANTIS MODEL GTC-550as originally manufactured and equipped by Tadano Mantis CorporationShaded Area is Allowable Operating RangeLimits of operation:Maximum load capacity = 750 lbMaximum radius when mounted on main boom = 60 ftMaximum occupancy = 2 personsWARNING: Lifting a load during Work Platform operation is not allowed.Notes:1. I t is permissible to leave the jibs stowed on the boom while operating with Work Platform mounted to the main boom.2. The hook block(s) must be removed when using the Work PlatformWP750 WORK PLATFORM ON MAIN JIB RANGE CHARTFOR MANTIS MODEL GTC-550as originally manufactured and equipped by Tadano Mantis CorporationShaded Area is Allowable Operating RangeLimits of operation:Maximum load capacity = 750 lb Maximum jib offset = 5 degreesMaximum radius when mounted on jib boom = 70 ftMaximum occupancy = 2 personsWARNING: Lifting a load during Work Platform operation is not allowed.Notes:1. I t is permissible to leave the jibs stowed on the boom while operating with Work Platform mounted to the main boom.2. The hook block(s) must be removed when using the Work PlatformPLEASE READ, UNDERSTAND, AND FOLLOW THE MANUALS FURNISHED WITH THE CRANE AS WELL AS THE CAPACITY LIMITATIONS AND GENERAL CONDITIONS LISTED BELOW PRIOR TO OPERATI ON OF THE CRANE. FAILURE TO DO SO MAY RESULT IN AN ACCIDENT.Performance of this TADANO MANTIS crane as manufactured by Tadano Mantis Corporation applies only to machines as originally equipped by the manufacturer and in a properly maintained condition. Capacities given are maximum covered by the manufacturer’s warranty and are based on a freely suspended load with NO allowance for factors as out-of-level operation (beyond the limits specified on the charts), supporting surface conditions, hazardous surroundings, experience of personnel, etc. The operator shall establish practical working loads based on prevailing operating conditions, such as, but not limited to the above.The crane meets the requirements of ASME B30.5. Structure and Stability have been tested in accordance with SAE J1063 and SAE J765, respectively.Maximum admissible wind velocity for working with telescopic boom and jibs is 20 mph. Consult TADANO MANTIS for ratings athigher wind speeds.Side pull on boom is extremely dangerous and must be avoided.DO NOT exceed manufacturers maximum specified reeving.Boom angle/boom length relationships given are an approximation of the resulted load radius, which should be an accurate measurement. Boom height dimensions are measured from ground to center of lower boom head sheave.It is permissible to attempt to telescope boom with a load within the limits of rated capacities. However, boom angle system hydraulic pressure, and/or boom lubrication may affect operation.It is permissible to travel with loads within the rated capacity of the crane. Travel speeds should be greatly reduced to reflect terrain limitations and minimize dynamic loads applied to the crane structure.Lifting capacities are shown in lbs x 1000.The weight of load handling devices such as hook blocks, slings, etc., must be considered as part of the load and must be deducted from the lifting capacities.The lifting capacities for the telescopic boom apply to a crane with no jibs or other optional equipment stowed or mounted on the crane.The working radius is the horizontal distance from the center of rotation to the center of the freely suspended, non-oscillating load.Lifting capacities are for reference only. Load charts supplied with the crane should be used for lift planning.The above remarks are for basic information only and the operator’s manual must be consulted before operating this crane. All data and performances refer to the standard crane. The addition of optional and other non-standard equipment may affect the performance of the crane. Load moment indicating and anti-two block systems are operator aids and must never be used in lieu of job site lift planning calculations by the operator which must take into account ground conditions, weather and all other environmental factors prevailing at the time of the lift. Specifications are subject to change at any time without prior notice. Illustrations and photographs may show optional equipment. Supersedes all previous issues.NOTESNOTEST A D A N O M A N T I S C O R P O R A T I O N1705 C o l u m b i a A v e n u e • F r a n k l i n , T N 37064 U S A • T o l l -F r e e : 1-800-272-3325 • F a x : 615-790-6803 • m a n t i s c r a n e s .c o mTADANO Ltd.,International Division 4-12, Kamezawa 2-chome,Sumida-Ku, Tokyo 130-0014, Japan Tel: +81 3 3621 7750Fax: +81 3 3621 7785。
最全汽车吊性能参数表8-500吨
8--500 吨汽车吊性能参数表8 吨汽车起重机性能表 (2)20 吨汽车吊机额定性能表 (3)25 吨汽车起重机起重性能表(主臂) (4)30 吨汽车起重机性能表(一) (6)50 吨汽车起重机性能表(主表) (8)80 吨汽车起重机起重性能表 ( 一) (10)100t 汽车吊性能表 (12)120 吨汽车起重机起重性能表 (13)150 吨汽车起重机性能表(一 ) (14)150 吨汽车起重机性能表(二 ) (15)160t 汽车吊性能表 (16)200 吨汽车吊车 (17)260 吨吊车性能表 (17)LTM1300/1-300t 全液压汽车吊机 (18)LTM1500-500t 全液压汽车吊机 (21)LTM1500-500t 全液压汽车吊机 (22)8吨汽车起重机性能表主要技术参数 6.95m 吊臂8.50m 吊臂吊臂吊臂工作起升起重工作起升起重工作起升起重工作起升起重参数名称参数半径高度量半径高度量半径高度量半径高度量(m) (m) (t) (m) (m) (t) (m) (m) (t) (m) (m) (t) 全车总重最大爬坡能力22%吊臂最大仰角吊臂全伸时长度吊臂全缩时长度最大提高升度最小工作半径最小转弯半径20吨汽车吊机额定性能表以下工况仅供参照,实质请与本企业业务员联系!主臂长度( m)主臂 +付臂展转半径( m)20 ————————————————————————————————————————————————————10 10 ——————9 9 ——————5 ———————— 4———————————————————————————— 1————————————————————————————————————————————————————25吨汽车起重机起重性能表(主臂)以下工况仅供参照,实质请与本企业业务员联系!吊臂长度 (m)工作半径 (m)3 254 18576 711 77 10 788 59 7 610 612 414 3 316182022 1 12426282930(注 : 本表内红字及红字以上栏目的数字为吊臂强度所决定 ,其下边栏目数字为倾翻力矩决定 )25吨汽车起重机起重性能表(副臂)7.5 副臂主臂主角副臂倾角 5 度副臂倾角30 度80 度75 度70 度65 度60 度55 度50 度30吨汽车起重机性能表(一)以下工况仅供参照,实质请与本企业业务员联系!主臂起重性能主要技术参数工作半径支腿全伸不用支腿名称参数(m )全车总重最大爬坡能力31%最大提高升度吊臂全伸时长度吊臂全缩时长度最小转弯半径最大仰角80°30t 吊钩重12t 吊钩重4t 吊钩重10m 吊臂时钢8 根丝绳数10-17m 时钢丝5 根绳数24m 时钢丝绳4 根数31m 时钢丝绳3 根数(注 :本表内红字及红字以上栏目的数字为吊臂强度所决定, 其下边栏目数字为倾翻力矩决定) 30吨汽车起重机性能表(二)吊臂角度工作半径使用副臂倾工作半径使用副臂倾吊臂角度角 5°角 5°80°80°78.5 °77°78°76°76°74°74°72°72°70°70°68°68°66°66°64°64°62°62°60°60°58°58°55°55°54°54°52°52°50°50°48°48°注: 1、若副臂在工作地点,但仍用主臂吊装,主臂的起重性能应相应的减去2 、使用副臂吊装时,主臂的角度不得大于45 ,不然将倾翻50吨汽车起重机性能表(主表)以下工况仅供参照,实质请与本企业业务员联系!不支第五支腿,吊臂位于起重机前面或后方;支起第五支腿,吊臂位于侧方、后方、前面主臂长度 (m)工作半径 (m)二0 100 100 100 100各臂伸缩三0 0 33 66 100 率四0 0 33 66 100(% )五0 0 33 66 100 钢丝绳倍率12 8 5 4 3 吊钩重量(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下边栏目数字为倾翻力矩决定)50吨汽车起重机性能表(副臂)吊臂位于起重机侧方或后方吊臂长度( m)主臂仰角(°)主臂 +副臂主臂 +副臂主臂 +副臂0°20°0°20°0°20°78757270656055二各节臂伸三100缩率四(%) 五钢丝绳倍率 1吊钩重量80 吨汽车起重机起重性能表(一 )以下工况仅供参照,实质请与本企业业务员联系!主臂起重性能表吊臂长度吊臂长度 (支腿全伸 )工作半径 (m) (不伸支腿 )80 吨汽车起重机起重性能表(二 )主要技术参数副臂起重性能支腿全伸在双侧或后部吊装名称参数主臂仰角44m 主臂副臂 5°夹角44m 主臂 +15m 副臂 5°夹角工作半径 (m) 起重性能 (t) 工作半径 (m) 起重性能 (t) 全车总重81.3 °主臂全伸时80.4 °长度主臂全缩时80.1 °长度最大仰角82°78.6 °最大爬坡能16% 75.2 °力最小转弯半15.40% 70.8 °径最大提高升66.0 °度80t 主吊钩重1t 63.8 °80t 协助吊钩58.0 °重6t 副吊钩重55.4 °100t 汽车吊性能表120吨汽车起重机起重性能表以下工况仅供参照,实质请与本企业业务员联系!工作半主臂长度 (m)径 (m)3 120 111107 102 924 95 94 88 81 6986 82 75 665 79 76 70 62 516 66 66 62 55 49 407 56 56 55 49 38 328 48 47 44 40 329 42 4010 3712 2814 1516 1918 15202224 1026 9 828 8 830 732 6 6343638 440 442444648 2 2505254150 吨汽车起重机性能表(一 )以下工况仅供参照,实质请与本企业业务员联系!主臂 360° 75% 起重性能吊臂长度 (m)工作半径 (m)140(注 :本表内红字及红字以上栏目的数字为吊臂强度所决定, 其下边栏目数字为倾翻力矩决定)150 吨汽车起重机性能表(二 )吊臂展转至后部及双侧时吊装性能吊臂长度 (m)工作半径 (m)(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下边栏目数字为倾翻力矩决定)160t 汽车吊性能表200吨汽车吊车260吨吊车性能表LTM1300/1-300t 全液压汽车吊机LTM1300/1-300t 全液压汽车吊机主臂额定性能表:支腿开距=8.85 ×8.5m 、旋转角度 =360°、标准配重=87.5t 。
各型号汽车起重机尺寸参数表
尺寸参数单位QY8B.5整机全长mm 9450整机全宽mm 2400整机全高mm 3180重量参数行驶状态整机质量kg 10490前轴轴荷kg 2800后轴轴荷kg 7690发动机型号XZJ5103JQZ8D89(国Ⅲ) 发动机额定功率kW/(r/min) 105/2500发动机额定扭矩N.m/(r/min) 500/1600行驶参数最高行驶速度km/h 75最小转弯直径mm 16000最小离地间隙mm 260接近角°29离去角°11最大爬坡能力% 28百公里油耗L 25.5主要性能参数最大额定总起重量t 8最小额定幅度m 3转台尾部回转半径m 2.254最大起重力矩KN.m 245基本臂m 8.2最长主臂m 19最长主臂+副臂m 25.3支腿纵向距离m 3.825支腿横向距离m 4.18工作速度参数起重臂变幅时间s 28起重臂全伸时间s 31最大回转速度r/min 2.8主起升机构单泵/双泵合流(单绳)m/min 53/110尺寸参数单位QY12B.5整机全长mm 10200整机全宽mm 2500整机全高mm 3200重量参数行驶状态整机质量kg 16000前轴轴荷kg 6000后轴轴荷kg 10000动力参数发动机型号6C215、WD415.21、SC8DK230Q3 发动机额定功率kW/(r/min) 158/2200、155/2200、170/2200790/1400、820/1400、830/1400发动机额定扭矩N.m/(r/min)最高行驶速度km/h 68、75最小转弯直径mm 18000最小离地间隙mm 260接近角°21离去角°10最大爬坡能力% ≥26、≥28百公里油耗L 30、40主要性能参数最大额定总起重量t 12最小额定幅度m 3转台尾部回转半径m 2.6最大起重力矩kN.m 428基本臂m 9.3最长主臂m 23最长主臂+副臂m 29.4支腿纵向距离m 4.1支腿横向距离m 4.9工作速度参数起重臂变幅时间s 50起重臂全伸时间s 75最大回转速度r/min 2.6主起升机构满载/空载(单绳)m/min 110尺寸参数单位QY16B.5整机全长mm 12110整机全宽mm 2500整机全高mm 3250重量参数行驶状态整机质量kg 24000前轴轴荷kg 6400后轴轴荷kg 17600发动机型号WD415.21 SC8DK230Q3 发动机额定功率kW/(r/min) 155/2200、170/2200发动机额定扭矩N.m/(r/min) 820/1400 830/1400最高行驶速度km/h 75最小转弯直径mm 20000最小离地间隙mm 270接近角°21离去角°10最大爬坡能力% 24百公里油耗L ≤35主要性能参数最大额定总起重量t 16最小额定幅度m 3转台尾部回转半径m 3.14最大起重力矩KN.m 720基本臂m 9.9最长主臂m 31.1最长主臂+副臂m 39.4支腿纵向距离m 4.6支腿横向距离m 5.4工作速度参数起重臂变幅时间s 60起重臂全伸时间s 95最大回转速度r/min 2.5主起升机构满载/空载(单绳)m/min 54/100副起升机构满载/空载(单绳)m/min 54/100尺寸参数Unit QY16C整机全长mm 11990整机全宽mm 2500整机全高mm 3350重量参数行驶状态整机质量kg 22900前轴轴荷kg 5240后轴轴荷kg 17660发动机型号上柴SC8DK230Q3(国Ⅲ) 发动机额定功率kW/(r/min) 170/2200发动机额定扭矩N.m/(r/min) 830/1400最高行驶速度km/h 70最小转弯直径mm 20000最小离地间隙mm 270接近角°21离去角°10最大爬坡能力% 24百公里油耗L ~35主要性能参数最大额定总起重量t 16最小额定幅度m 3转台尾部回转半径m 3.12最大起重力矩KN.m 738基本臂m 9.9最长主臂m 23.6最长主臂+副臂m 30.6支腿纵向距离m 4.6支腿横向距离m 5.4工作速度参数起重臂变幅时间s 60起重臂全伸时间s 75最大回转速度r/min ≥2.5主起升机构满载/空载(单绳)m/min 54/100副起升机构满载/空载(单绳)m/min 54/100尺寸参数单位QY20B.5整体全长mm 12400整机全宽mm 2500整机全高mm 3300重量参数行驶状态整机质量kg 26020前轴轴荷kg 6900后轴轴荷kg 19120动力参数发动机型号 SC8DK260Q3、WD615.327 发动机额定功率kW/(r/min) 192/2200 198/2200发动机额定扭矩N.m/(r/min) 1100/1400 1150/1400最高行驶速度km/h 75最小转弯直径m 20最小离地间隙mm 270接近角°21离去角°11最大爬坡能力% 35百公里油耗L ≈35主要性能参数最大额定总起重量t 20最小额定幅度mm 3000转台尾部回转半径m 3.385最大起重力矩kN.m 860基本臂m 10.06最长主臂m 32.76最长主臂+副臂m 42.12支腿纵向距离m 4.97支腿横向距离m 5.4起重臂变幅时间s 75起重臂全伸时间s 95最大回转速度r/min 3主起升机构最大速度(单绳) m/min 100副起升机构最大速度(单绳) m/min 100尺寸参数Unit QY20G整体全长mm 12000 整机全宽mm 2500整机全高mm 3300行驶状态整机质量kg 26020前轴轴荷kg 7000 后轴轴荷kg 19020 发动机型号发动机额定功率kW/(r/min)发动机额定扭矩N.m/(r/min)行驶参数最高行驶速度km/h 75最小转弯直径m 20最小离地间隙mm 270 接近角°16离去角°13最大爬坡能力% 35百公里油耗L ~35 主要性能参数最大额定总起重量t 20最小额定幅度mm 3000 转台尾部回转半径m 3.38 最大起重力矩kN.m 833 基本臂m 10.1 最长主臂m 31.6 最长主臂+副臂m 39.9 支腿纵向距离m 4.9支腿横向距离m 5.4工作速度参数起重臂变幅时间s 75起重臂全伸时间s 95最大回转速度r/min 3主起升机构最大速度(单绳) m/min 100 副起升机构最大速度(单绳) m/min 100尺寸参数Unit QY20G.5整体全长mm 12400整机全宽mm 2500整机全高mm 3320行驶状态整机质量kg 26020前轴轴荷kg 6900后轴轴荷kg 19120发动机型号 SC8DK260Q3 WD615.327 发动机额定功率kW/(r/min) 192/2200 198/2200发动机额定扭矩N.m/(r/min) 1100/1400 1150/1400 行驶参数最高行驶速度km/h 75最小转弯直径m 20最小离地间隙mm 275接近角°16离去角°13最大爬坡能力% 24百公里油耗L ≈35主要性能参数最大额定总起重量t 20最小额定幅度mm 3000转台尾部回转半径m 3.385最大起重力矩kN.m 860基本臂m 10.06最长主臂m 32.76最长主臂+副臂m 42.12支腿纵向距离m 4.97支腿横向距离m 5.4工作速度参数起重臂变幅时间s 75起重臂全伸时间s 95最大回转速度r/min 3主起升机构最大速度(单绳) m/min 100副起升机构最大速度(单绳) m/min 100尺寸参数单位QY25B.5整体全长mm 12990整机全宽mm 2500整机全高mm 3430行驶状态整机质量kg 29000前轴轴荷kg 6970后轴轴荷kg 22030发动机型号 SC8DK260Q3 发动机额定功率kW/(r/min) 192/2200 发动机额定扭矩N.m/(r/min) 1000/1400 行驶参数最高行驶速度km/h 75最小转弯直径m 20最小离地间隙mm 272接近角°16离去角°13最大爬坡能力% 30百公里油耗L 40主要性能参数最大额定总起重量t 25最小额定幅度mm 3000转台尾部回转半径m 3.450最大起重力矩kN.m 1010基本臂m 10.85最长主臂m 34.19最长主臂+副臂m 42.3支腿纵向距离m 5支腿横向距离m 6工作速度参数起重臂变幅时间s 75起重臂全伸时间s 100最大回转速度r/min 3主起升机构最大速度(单绳) m/min 120副起升机构最大速度(单绳) m/min 120尺寸参数Unit QY25K5整体全长mm 12000整机全宽mm 2500整机全高mm 3380重量参数行驶状态整机质量kg 31000 / 31750前轴轴荷kg 6400 / 6550后轴轴荷kg 24600 / 25200发动机型号SC8DK280Q3 / WD615.329(国III) 发动机额定功率kW/(r/min) 206/2200 213/2200发动机额定扭矩N.m/(r/min) 1112/1400 1160/1400最高行驶速度km/h 75最小转弯直径m 22最小离地间隙mm 260接近角°16离去角°13最大爬坡能力% 30百公里油耗L ≈37主要性能参数最大额定总起重量t 25最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 961基本臂m 10.1最长主臂m 38.5最长主臂+副臂m 46.8支腿纵向距离m 5.14支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s 150最大回转速度r/min ≥2.5主起升机构最大速度(单绳) m/min ≥125副起升机构最大速度(单绳) m/min ≥125尺寸参数Unit QY25K5-I整体全长mm 12550整机全宽mm 2500整机全高mm 3380重量参数行驶状态整机质量kg 29400前轴轴荷kg 6200后轴轴荷kg 23200发动机型号SC8DK280Q3 / WD615.329(国III)发动机额定功率kW/(r/min) 206/2200 213/2200发动机额定扭矩N.m/(r/min) 1112/1400 1160/1400最高行驶速度km/h 75最小转弯直径m 22最小离地间隙mm 260接近角°16离去角°13最大爬坡能力% 30百公里油耗L ≈37主要性能参数最大额定总起重量t 25最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 1000基本臂m 10.6最长主臂m 33最长主臂+副臂m 41.15支腿纵向距离m 5.14支腿横向距离m 6工作速度参数起重臂变幅时间s 75起重臂全伸时间s 100最大回转速度r/min ≥2.5主起升机构最大速度(单绳) m/min ≥120副起升机构最大速度(单绳) m/min ≥120尺寸参数单位QY25K5-I整体全长mm 12300整机全宽mm 2500整机全高mm 3350重量参数行驶状态整机质量kg 31750前轴轴荷kg 6550后轴轴荷kg 25200动力参数发动机型号SC8DK280Q3 WD615.329 发动机额定功率kW/(r/min) 206/2200 213/2200发动机额定扭矩N.m/(r/min)1112/1400 1160/1400行驶参数最高行驶速度km/h 80最小转弯直径m 22最小离地间隙mm 260接近角°16离去角°13最大爬坡能力% 40百公里油耗L ≈37主要性能参数最大额定总起重量t 25最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 961基本臂m 10.4最长主臂m 39.5最长主臂+副臂m 47.8支腿纵向距离m 5.14支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s 150最大回转速度r/min 2.5主起升机构最大速度(单绳)(空载)m/min 125副起升机构最大速度(单绳)(空载)m/min 125尺寸参数单位QY25K5-I 整体全长mm 12300整机全宽mm 2500整机全高mm 3350重量参数行驶状态整机质量kg 31750前轴轴荷kg 6550后轴轴荷kg 25200动力参数发动机型号SC8DK280Q3WD615.329发动机额定功率kW/(r/min) 206/2200 213/2200 发动机额定扭矩N.m/(r/min) 1112/1400 1160/1400 行驶参数最高行驶速度km/h 80最小转弯直径m 22最小离地间隙mm 260接近角°16离去角°13最大爬坡能力% 40百公里油耗L ≈37主要性能参数最大额定总起重量t 25最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 961基本臂m 10.4最长主臂m 39.5最长主臂+副臂m 47.8支腿纵向距离m 5.14支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s 150最大回转速度r/min 2.5主起升机构最大速度(单绳)(空载) m/min 125副起升机构最大速度(单绳)(空载) m/min 125尺寸参数单位QY30K5整体全长mm 12070整机全宽mm 2500整机全高mm 3390重量参数行驶状态整机质量kg 32400前轴轴荷kg 7000后轴轴荷kg 25400动力参数发动机型号WD615.329 / SC8DK280Q3 (国III)发动机额定功率kW/(r/min) 206/2200 213/2200发动机额定扭矩N.m/(r/min) 1160/1400 1112/1400 行驶参数最高行驶速度km/h 75最小转弯直径m 22最小离地间隙mm 291接近角°19离去角°13最大爬坡能力% 30百公里油耗L 40主要性能参数最大额定总起重量t 30最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 1025基本臂m 10.1最长主臂m 38.5最长主臂+副臂m 46.8支腿纵向距离m 5.85支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s 150 / 140最大回转速度r/min ≥2.5主起升机构最大速度(单绳) m/min ≥ 120副起升机构最大速度(单绳) m/min ≥ 120尺寸参数单位QY30K5-I 整体全长mm 12570整机全宽mm 2500整机全高mm 3390重量参数行驶状态整机质量kg 32400前轴轴荷kg 7000后轴轴荷kg 25400动力参数发动机型号SC8DK280Q3WD615.329发动机额定功率kW/(r/min) 206/2200 213/2200 发动机额定扭矩N.m/(r/min) 1112/1400 1160/1400 行驶参数最高行驶速度km/h 80最小转弯直径m 22最小离地间隙mm 291接近角°19离去角°13最大爬坡能力% 40百公里油耗L 40主要性能参数最大额定总起重量t 30最小额定幅度mm 3000转台尾部回转半径m 3.065最大起重力矩kN.m 1025基本臂m 10.6最长主臂m 40.4最长主臂+副臂m 48.7支腿纵向距离m 5.85支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s 150最大回转速度r/min 2.5主起升机构最大速度(单绳)(空载) m/min 120副起升机构最大速度(单绳)(空载) m/min 120尺寸参数单位QY35K5整体全长mm 12620整机全宽mm 2500整机全高mm 3350重量参数行驶状态整机质量kg 36930前轴轴荷kg 12330后轴轴荷kg 24600动力参数发动机型号SC9DK320Q3 发动机额定功率kW/(r/min) 235 / 2200发动机额定扭矩N.m/(r/min) 1250 / 1400 行驶参数最高行驶速度km/h 75最小转弯直径m 19.5最小离地间隙mm 260接近角°17离去角°15.7最大爬坡能力% 40百公里油耗L 30主要性能参数最大额定总起重量t 35最小额定幅度mm 3000转台尾部回转半径m 3.055最大起重力矩kN.m 1200基本臂m 10.5最长主臂m 39.6最长主臂+副臂m 54.6支腿纵向距离m 5.35支腿横向距离m 6工作速度参数起重臂变幅时间s 68起重臂全伸时间s ≤155最大回转速度r/min ≥2.5主起升机构最大速度(单绳) m/min ≥130副起升机构最大速度(单绳) m/min ≥130尺寸参数单位QY40K整体全长mm 13050整机全宽mm ≤2800整机全高mm 3430重量参数行驶状态整机质量kg 40400前轴轴荷kg 14500后轴轴荷kg 25900动力参数发动机型号WD615.334 发动机额定功率kW/(r/min) 247 / 2200发动机额定扭矩N.m/(r/min) 1350 / 1400 行驶参数最高行驶速度km/h 75最小转弯直径m ≤24最小离地间隙mm 285接近角°16离去角°11最大爬坡能力% 46百公里油耗L 46主要性能参数最大额定总起重量t 40最小额定幅度mm 3000转台尾部回转半径m 3.482最大起重力矩kN.m 1400基本臂m 10.7最长主臂m 40.1最长主臂+副臂m 55.1支腿纵向距离m 5.65支腿横向距离m 6.6工作速度参数起重臂变幅时间s ≤88起重臂全伸时间s ≤180最大回转速度r/min ≥2.0主起升机构最大速度(单绳) m/min ≥110副起升机构最大速度(单绳) m/min ≥110尺寸参数单位QY50B.5整体全长mm 13890整机全宽mm 2800整机全高mm 3440重量参数行驶状态整机质量kg 42000第一、二轴轴荷kg 18000第三、四轴轴荷kg 26000动力参数发动机型号WD615.338 发动机额定功率kW/(r/min) 247/2200 发动机额定扭矩N.m/(r/min) 1350/1400 行驶参数最高行驶速度km/h 80最小转弯直径m 24最小离地间隙mm 327接近角°18离去角°11最大爬坡能力% 35百公里油耗L 40主要性能参数最大额定总起重量t 50最小额定幅度m 3转台尾部回转半径m 3.71最大起重力矩kN.m 1800基本臂m 11.56最长主臂m 42.58最长主臂+副臂m 55.8支腿纵向距离m 5.93支腿横向距离m 6.9工作速度参数起重臂变幅时间s 88起重臂全伸时间s 180最大回转速度r/min 2.0主起升机构最大速度(单绳) m/min 110副起升机构最大速度(单绳) m/min 110尺寸参数单位QY50K-I整体全长mm 13050整机全宽mm 2800整机全高mm 3430重量参数行驶状态整机质量kg 40400前轴轴荷kg 14500后轴轴荷kg 25900动力参数发动机型号WD615.334(国III)发动机额定功率kW/(r/min) 247/2200发动机额定扭矩N.m/(r/min) 1350/1400行驶参数最高行驶速度km/h 75最小转弯直径m 24最小离地间隙mm 285接近角°16离去角°11最大爬坡能力% 46百公里油耗L 42主要性能参数最大额定总起重量t 50最小额定幅度mm 3000转台尾部回转半径m 3.482最大起重力矩kN.m 1764基本臂m 10.7最长主臂m 41最长主臂+副臂m 56支腿纵向距离m 5.65支腿横向距离m 6.6工作速度参数起重臂变幅时间s 88起重臂全伸时间s 180最大回转速度r/min ≥2.0主起升机构最大速度(单绳) m/min ≥110副起升机构最大速度(单绳) m/min ≥110尺寸参数单位QY50K-II整体全长mm 13750整机全宽mm 2800整机全高mm 3520重量参数行驶状态整机质量kg 41000前轴轴荷kg 15000后轴轴荷kg 26000发动机型号WD615.334(国III) 发动机额定功率kW/(r/min) 247/2200发动机额定扭矩N.m/(r/min) 1350/1400最高行驶速度km/h 80最小转弯直径m 24最小离地间隙mm 291接近角°17离去角°11最大爬坡能力% 40百公里油耗L 45主要性能参数最大额定总起重量t 50最小额定幅度m 3转台尾部回转半径m 3.482最大起重力矩kN.m 1764基本臂m 11.3最长主臂m 42.7最长主臂+副臂m 57.7支腿纵向距离m 5.91支腿横向距离m 6.9工作速度参数起重臂变幅时间s 88起重臂全伸时间s 180最大回转速度r/min ≥2.0主起升机构最大速度(单绳)(空载) m/min ≥110副起升机构最大速度(单绳)(空载) m/min ≥110尺寸参数单位QY60K整体全长mm 13500整机全宽mm 2800整机全高mm 3510重量参数行驶状态整机质量kg 41000前轴轴荷kg 15000后轴轴荷kg 26000动力参数发动机型号WD615.338(国III) 发动机额定功率kW/(r/min) 276/2200发动机额定扭矩N.m/(r/min) 1500/1400行驶参数最高行驶速度km/h 75最小转弯直径m 24最小离地间隙mm 291接近角°17.5离去角°12最大爬坡能力% 40百公里油耗L 45主要性能参数最大额定总起重量t 60最小额定幅度mm 3000转台尾部回转半径m 3.55最大起重力矩kN.m 2060基本臂m 11.2最长主臂m 42最长主臂+副臂m 58支腿纵向距离m 5.81支腿横向距离m 6.7工作速度参数起重臂变幅时间s 60起重臂全伸全缩时间s ≤150最大回转速度r/min ≥2.0主起升机构最大速度(单绳) m/min ≥130副起升机构最大速度(单绳) m/min ≥108尺寸参数单位QY70K整体全长mm 13500整机全宽mm 2800整机全高mm 3540重量参数行驶状态整机质量kg 43000前轴轴荷kg 17000后轴轴荷kg 26000动力参数发动机型号WD615.338(国III) 发动机额定功率kW/(r/min) 276/2200发动机额定扭矩N.m/(r/min) 1500/1400行驶参数最高行驶速度km/h 75最小转弯直径m 24最小离地间隙mm 270接近角°19离去角°13最大爬坡能力% 40百公里油耗L 42主要性能参数最大额定总起重量t 70最小额定幅度mm 3000转台尾部回转半径m 3.55最大起重力矩kN.m 2303基本臂m 11.2最长主臂m 42最长主臂+副臂m 58支腿纵向距离m 5.75支腿横向距离m 6.9工作速度参数起重臂变幅时间s 60起重臂全伸全缩时间s ≤150最大回转速度r/min ≥2.0主起升机构最大速度(单绳) m/min ≥130副起升机构最大速度(单绳) m/min ≥108尺寸参数单位QY90K整体全长mm 14700整机全宽mm 2800整机全高mm 3900重量参数行驶状态整机质量kg 53000前轴轴荷(1、2、3轴)kg 9000/9000/13000 后轴轴荷(4、5轴)kg 13000/9000动力参数发动机型号TAD720VE OM457LAIII/9发动机额定功率kW/(r/min) 174/2300 315/1900发动机额定扭矩N.m/(r/min) 845/1400 2100/1100行驶参数最高行驶速度km/h 80最小转弯直径m 23最小离地间隙mm 315接近角°20离去角°16最大爬坡能力% 45百公里油耗L 60主要性能参数最大额定总起重量t 90最小额定幅度m 3转台尾部回转半径m 4.51最大起重力矩kN.m 3234基本臂m 12.3最长主臂m 55最长主臂+副臂m 71支腿纵向距离m 7.5支腿横向距离m 7.1工作速度参数起重臂变幅时间s 75起重臂全伸时间s 600最大回转速度r/min ≥2主起升机构最大速度(单绳)(空载) m/min ≥120副起升机构最大速度(单绳)(空载) m/min ≥85主要性能参数最大额定总起重量100t最小额定幅度3m转台尾部回转半径平衡重处4200mm副卷处4590mm最大起重力矩基本臂3450(4m×88t)kN.m 最长主臂1670(24m×7.1t)kN.m 最长主臂+副臂1127(19.2m×6t)kN.m 支腿距离(全伸)纵向7.56m横向7.6m起升高度基本臂12.8m最长主臂48.8m最长主臂+副臂66.8m起重臂长度基本臂12.8m最长主臂49m最长主臂+副臂49+18.1m 尺寸参数Unit QY100K-I整体长宽高mm 15600×3000×3850轴距mm 1420+2420+1800+1420+1505 重量参数行驶状态整机质量kg 54900 58000轴荷1轴kg 7500 75002轴kg 7500 75003轴kg 8300 100004轴kg 12000 125005轴kg 12000 125006轴kg 7600 8000动力参数发动机额定功率kW/(r/min) 360/1800 (306/1900)发动机额定扭矩N.m/(r/min) 2200/1300 (2010/1200)发动机额定转速r/min 1800 (1900)最小离地间隙mm 310行驶参数接近角°20离去角°14制动距离(车速为30km/h) m ≤10最大爬坡能力% 40最小转弯直径m 24百公里油耗L 70主要性能参数最大额定总起重量m 100最小额定幅度 3转台尾部回转半径平衡重处mm 4200副卷处mm 4590最大起重力矩3450基本臂kN.m 3450(4m×88t)最长主臂kN.m 1950(24m×7.1t)最长主臂+副臂kN.m 1230(19.2m×6t)支腿距离(全伸)纵向m 7.56横向m 7.6起升高度基本臂m 13.5最长主臂m 50.9最长主臂+副臂m 70.4起重臂长度Boom length基本臂最长主臂m 13.5最长主臂+副臂m 51工作速度参数m 51+18.1+4副臂安装角起重臂变幅时间°0、15、30起臂s 75起重臂伸缩时间全伸s 160最大回转速度r/min 2支腿伸缩时间水平支腿同时伸/缩s 25/15垂直支腿同时伸/缩s 45/25起升速度(单绳、第四层)主起升机构m/min 105副起升机构m/min 104主要性能参数最大额定总起重量130t最小额定工作幅度3m转台尾部回转半径(平衡重) 4600mm最大起重力矩5003基本臂5003kN.m最长主臂2090kN.m支腿距离纵向7.56m横向7.6(5.2)m起升高度基本臂13m最长主臂58m最长主臂+副臂(28m)86m起重臂长度基本臂13m最长主臂58m最长主臂+副臂(28m)86m副臂安装角0°、15°、30°尺寸参数Unit QY160K整体全长mm整机全宽mm整机全高mm重量参数行驶状态整机质量kg 54900前轴轴荷kg后轴轴荷kg动力参数发动机型号OM460LA.E3A/1 发动机额定功率kW/(r/min) 360/1800发动机额定扭矩N.m/(r/min)行驶参数最高行驶速度km/h 80 最小转弯直径m 26 最小离地间隙mm 300 接近角°20 离去角°14 最大爬坡能力% 40 百公里油耗L 75 主要性能参数最大额定总起重量t 160 最小额定幅度mm转台尾部回转半径m最大起重力矩kN.m 5253 基本臂m最长主臂m 61.4 最长主臂+副臂m 88.6 支腿纵向距离m 7.8 支腿横向距离m 8工作速度参数起重臂变幅时间s起重臂全伸时间s最大回转速度r/min 1.8 主起升机构最大速度(单绳)(空载) m/min 110 副起升机构最大速度(单绳)(空载) m/min。
XGC55履带起重机技术规格书
XGC55履带起重机亮点介绍1.安全可靠的控制系统工作和安装两种操作模式方便可靠;紧急电气控制系统、安全及监控装置齐全。
高集成度的液压主阀,简化液压管路,使得故障点大大减少。
选配的旁路过滤系统,有效防止液压油乳化,延长系统元器件寿命。
2.卓越的操作性能创新性采用微控调节技术,大大提高整车动作的平稳性与精确度。
3.强大的起重能力主臂最大起重能力55t/3.7m,副臂最大起重能力11.4t/11m。
最长主臂52m,固定副臂最长组合43m+16m。
4.丰富的作业工况组合及工况轻松切换(选配功能)主臂工况、带臂端单滑轮及其吊钩的主臂工况、带固定副臂及其吊钩的主臂工况、固定副臂工况、带主臂吊钩的固定副臂工况、带主臂吊钩的臂端单滑轮工况,作业工况组合丰富且主副钩工况能实现一键轻松切换,满足各种吊装需求。
5.高效的作业效率丰富的组合动作和理想的单绳速度,作业轻松高效。
6.便捷的拆装功能配备人字架自扳起功能,无需辅助车辆,轻松实现人字架自扳起;臂架销轴双尖头及二重倒角技术,实现臂架拆装快捷高效。
7.灵活的配置组合发动机、泵、阀、机构、马达、回转支承等关键零部件均有国产和进口两种配置,主起升还有快放型配置,另有主臂走台板、监控系统、防雷击保护装置、电子水平仪、行走反向等多种功能可供用户选购,可满足不同用户群体需求。
8.模块化的部件设计百吨级以下XGC系列产品的固定副臂、臂端单滑轮、平衡重、吊钩能实现通用,可大大减少用户购买XGC系列产品的成本。
9.方便的维修技术需调整部位接近时间不大于10min/人,需日常保养部位接近时间不大于30 min/人,最长维修接近时间不大于2h/人;选配GPS远程监控系统方便用户进行设备维护与管理。
10.独具特色的外观造型XGC55是一款运用工业设计手段打造的全新造型产品。
仿生设计技术研发的新型操纵室外观时尚新颖,内饰与控制系统经过人体仿真软件模拟实验,操作更加便捷舒适,视野更宽广。
XGC55履带起重机技术规格书履带起重机型号:XGC55最大额定起重量:55t/3.7m最大额定起重力矩:203.5t.m一、产品的部件和系统描述一)上车部分1、臂架组合方式XGC55履带起重机的臂架为高强无缝钢管作为弦管和腹管,辅以高强钢板分段焊接成中间等截面,两端变截面的四弦管空间桁架结构。
QY55H汽车起重机主要技术参数
QY55H汽车起重机主要技术参数
1.起重能力:QY55H汽车起重机的最大起重能力为55吨,可以满足
大部分中小型起重作业需求。
2.工作范围:QY55H汽车起重机的工作范围主要由其主臂和起重臂长
度决定。
其主臂长度为11.9米至42米,可根据不同作业需求进行调整;
起重臂长度为9.5米至52米,也可以根据实际情况进行调整。
这些参数
可以满足不同高度和距离的起重要求。
3.最大起升高度:QY55H汽车起重机的最大起升高度为56米,可以
满足大部分建筑工地的需要。
4.起升速度和回转速度:QY55H汽车起重机的起升速度为85米/分钟,回转速度为2.3转/分钟,提高了施工效率。
5.载荷矩:QY55H汽车起重机的载荷矩为2230千牛米,可以满足大
部分起重需求。
6.轮胎数量和尺寸:QY55H汽车起重机采用6轮驱动系统,具有良好
的操控性能。
轮胎尺寸为12.00R20,适应各种复杂路况。
以上是QY55H汽车起重机的主要技术参数,这些参数直接影响到起重
机的起升能力、作业范围、工作效率等,选择合适的起重机需要根据实际
需求来决定。
在使用起重机时,还需要严格按照使用说明和安全规范进行
操作,确保工作安全。
三一重工GT-550E型55吨液压汽车起重机使用说明书
SUPERSTRUCTURE SPECIFICATIONSCAB AND CONTROLSBy 4 control levers for swing, boom hoist, main winch, boom tele-scoping or auxiliary winch with 2 control pedals for boom hoist,boom telescoping based on ISO standard layout.Control lever stands can change neutral positions and tilt for easyaccess to cab.One sided one-man type, steel construction with sliding door ac-cess and tinted safety glass windows opening at side.Operator's 3 way adjustable seat with headrest and armrest.OUTRIGGERHydraulically operated H-type outriggers. Each outrigger control-led simultaneously or independently from either side of carrier.Equipped with sight level gauge. Floats mounted integrally withthe jacks retract to within vehicle width. All cylinders fitted with pi-lot check valves.Crane operation with different extended length of each outrigger.Equipped with extension width detector for each outrigger.Extended widthFully.................................6,800 mmMiddle..............................4,600 mmMinimum..........................2,390 mmFloat size (Diameter).......400 mmFRONT JACKA fifth hydraulically operated outrigger jack. Mounted to the frontframe of carrier to permit 360o lifting capabilities.Hydraulic cylinder fitted with pilot check valve.Equipped with front jack extension detector.Float size(Diameter)...........350 mmCOUNTERWEIGHTIntegral with swing frameMass................................4,200 kgTADANO Automatic Moment LimiterMain unit in crane cab gives audible and visual warning of ap-proach to overload. Automatically cuts out crane motions beforeoverload. With working range (load radius and / or boom angleand / or tip height and / or swing range) limit function.Nine functions are constantly displayed.Either moment as percentage or main hydraulic pressureEither boom angle or moment %Either boom length or potential hook heightEither actual load radius or swing angleActual hook loadPermissible loadEither jib offset angle or number of parts of line of ropeBoom position indicatorOutrigger position indicatorNOTEEach crane motion speed is based on unladen conditions. BOOM5-section full power partially synchronized telescoping boom ofhexagonal box construction with 6 sheaves at boom head. Thesynchronization system consists of 2 telescope cylinders, exten-sion cables and retraction cables. Hydraulic cylinders fitted withholding valves. Selection of 2 boom telescoping modes.Fully retracted length.......11.1 mFully extended length.....42.0 mExtension speed..............30.9 m in 123 sJIB2-staged boom extension type. Triple offset (5o /25o / 45o ) type.Stored under base boom section.Single sheave at jib head.Length............................9.0 m and 14.6 mSINGLE TOP( Auxiliary boom sheave )Single sheave. Mounted to main boom head for single line work.ELEVATIONBy a double-acting hydraulic cylinder, fitted with holding valve.Automatic Speed Reduction and Soft Stop function.Elevation speed...............- 2o to 80o in 68 sHOIST-Main winchVariable speed type with grooved drum driven by hydraulic axialpiston motor through winch speed reducer. Power load loweringand hoisting. Equipped with automatic brake (Neutral brake) andcounterbalance valve.Controlled independently of auxiliary winch.Single line pull.................42.2 kN { 4,300kgf }Single line speed.............143 m/min (at the 4th layer)Wire rope.........................Spin-resistant typeDiameter..........................19.05 mmLength.............................227 mHOIST-Auxiliary winchVariable speed type with grooved drum driven by hydraulic axialpiston motor through winch speed reducer. Power load loweringand hoisting. Equipped with automatic brake (Neutral brake) andcounterbalance valve.Controlled independently of main winch.Single line pull.................44.1 kN { 4,500kgf }Single line speed.............123 m/min (at the 2nd layer)Wire rope.........................Spin-resistant typeDiameter..........................19.05 mmLength.............................127 mSWINGHydraulic axial piston motor driven through planetary speed reduc-er. Continuous 360o full circle swing on ball bearing slew ring. Au-tomatic Speed Reduction and Soft Stop function.Equipped with manually locked/released swing brake.Swing speed....................1.9 min-1 { rpm }HYDRAULIC SYSTEMPumps.............................Quadruple gear pumps driven bycarrier engine through P.T.O.Control valves..................Multiple valves actuated by pilotpressure with integral pressure reliefvalves.Circuit..............................Equipped with air cooled type oilcooler. Oil pressure appears on AMLdisplay for main circuit.Oil tank capacity..............approx. 690 litersFilters...............................Return line filterCARRIER SPECIFICATIONS and EQUIPMENTEQUIPMENTFor superstructureStandard Equipment4.5 ton capacity, hook ball and swivelControl pedals for boom hoist, boom telescoping3 working lightsExternal lamp(AML)Cable followerSun visorOptional Equipment55 ton capacity, 6 sheaves hook block20 ton capacity, 2 sheaves hook blockWinch drum rotation indicator(Visual)Winch drum mirror(Hoist mirror)Sun shadeSun visorElectric fanHot water heater and air conditionigCab floor matFor carrierStandard EquipmentFan clutch :Viscous-typeIntake air heaterOverheating warning buzzerCooling water level warning buzzerEngine over-run alarmPTO hour meterSeat belt :3 point type for driverTilting-telescoping steering wheelWindshield wiper(with intermittent wiping)and washerWindow glass :Tinted, Infrared and Ultraviolet rays absorptionTachometerLow air pressure warning buzzerAM radioCar heater(Hot water type)with defrosterThird differential gear lockSpeedometer(with odometer)Sun visorSpare tire carrier with lock keyTool box with lock keyFuel tank cap with lock keyBack-up lightBack-up alarmAir filter warning light(Instrument cluster)Towing hook(Front and rear, Eye type)AshtrayCigarette lighterFront fog lampOwner's tool setCab floor matOptional EquipmentCar cooler(Refrigerant:R134a)AM/FM radioMANUFACTURERNISSAN DIESEL MOTOR Co., LTD.MODELKG48UXN ( Right hand steering, 8 x 4 )ENGINE [ EURO-2 ]Model NISSAN PF6TBType 4 cycle, turbo charged, 6 cylinder inline,direct injection, water cooled diesel en-gine.Piston displacement12,503 cm3Bore x stroke133 mm x 150 mmMax. output (JIS)257 kW{350PS/345hp} at 2100 min-1{rpm}Max. torque (JIS)1460 Nm{150 kgfm} at 1200 min-1{rpm}TRANSMISSION7 forward and 1 reverse speeds, synchromesh on 2nd - 7th gear andconstant-mesh on 1st and reverse gear.AXLESFront...........................Reverse - elliot typeRear............................Full floating type.SUSPENSIONFront...........................Leaf spring.Rear............................Full floating type.STEERINGRecirculating ball screw type with linkage power assistance.BRAKE SYSTEMService........................Full air brake with maltiprotection valveand auto slack adjuster on all wheels, du-al air line system, internal expanding lead-ing and trailing shoe type.Parking........................Mechanically operated by hand brake lev-er, internal expanding duo-servo shoetype acting on drum at transmission caserear.Auxiliary.......................Electro-pneumatic operated exhaustbrake.Emergency..................Pneumatically controlled spring brake, act-ing on all rear axles.TIRESFront...........................315/80 R 22.5 156/150, Single x 4Rear............................315/80 R 22.5 156/150, Dual x 4Spare..........................315/80 R 22.5 156/150, Single x 1ELECTRONIC SYSTEM24 V DC. 2 batteries of 12 V (JIS)115F51, 96Ah at 5-hour rateAlternator 24V-50AFUEL TANK CAPACITY300 litersL I F T I N G H E I G H T (m )5101520253035404550556065051015202530354070o50o40o11.1 m Boom5o25o15.0 m Boom 18.8 m Boom 34.3 m Boom42.0 m Boom9.0 m Jib30o10o0o14.6 m Jib60o80o26.6 m Boom45o20oRADIUS (m)Telescoping modeI42.0 m Boom 34.3 m Boom 26.6 m Boom 18.8 m Boom 15.0 m Boom Boom LengthNOTE:1. Boom and jib geometry shown are for unloaded condition and machine standing level on firm supporting surface.Boom deflection and subsequent radius and boom angle change must be accounted for when applying load to hook.o14.6 m Jib9.0 m Jib42.0 m Boom 38.1 m Boom 34.3 m Boom26.6 m Boom18.8 m Boom11.1 m Boom0510152025303540RADIUS (m)5101520253035404550556065L I F T I N G H E I G H T (m )5o25o45o80o70o60o50o40o30o20o10ooTelescoping mode II42.0 m Boom 38.1 m Boom 34.3 m Boom 26.6 m Boom 18.8 m Boom Boom LengthNOTE:1. Boom and jib geometry shown are for unloaded condition and machine standing level on firm supporting surface.Boom deflection and subsequent radius and boom angle change must be accounted for when applying load to hook.Load3.011.1 m15.0 m42.0 m38.1 mTelescoping III050100100010005010040,000 28,000radius (m)boomboom boom20,000Outriggers fully extended 6.8m55,00034.3 m boomboom26.6 m boom18.8 m boom40,000 28,0003.5 20,00043,70038,500 20,0004.0 28,00038,10033,800 28,0004.5 19,80034,20030,800 19,0005.0 28,00030,40027,400 27,2005.5 18,20027,80025,400 17,5006.0 24,70025,00022,800 22,5006.5 16,80023,20021,400 16,2007.0 20,70021,00019,300 19,1007.5 15,70019,70018,300 15,2008.0 17,60017,90014,600 14,2009.0 14,30015,20013,50010.0 11,30011,6009,500 9,10011.0 11,4009,60012.0 7,5007,8005,10014.0 7,2005,50016.0 3,50018.020.022.024.026.028.030.032.034.0ModeI I II III III II1,2001,7002,4003,3004,5006,2008,60010,30012,50014,20015,80016,70017,80018,90020,00020,00020,00020,0005,40012,00011,4002,40012,8003,00013,6007,8003,7007,20014,0004,7009,30014,0008,50010,80010,2006,2003,0009,6008,8002,20014,0003,9005,1001,60011,30013,50010,40014,00013,00012,5006,8003,2006,4005,8002,8008,0003,6004,2002,5007,6008,0007,0008,0008,0008,0004,9003,6006,9006,4002,8004,1004,7002,2008,0008,0007,5008,0008,0005,5003,2007,5006,9002,5004,2005,2001,9008,0008,0008,0008,0008,0005,9001,2005008002,1001,1001,4001,7001,8007001,0001,4001,4004507001,000500UNIT : kg •@CLASS OF CRANE ; C32nd boom3rd boom4th boomTop boom0003333666610010010003303366661001001000330336666100100100Telescoping conditions(%)I, II I, IINOTES1. Rated lifting capacities shown in the table are based on the condition that the crane is set on firm ground horizontally. Those above bold line are based on crane strength and those below, it is stability.2. Rated lifting capacities in the stability area comply with part 2 / ISO 4305.3. The mass of load handling devices such as hook blocks {570 kg for *55 ton capacity, 400 kg for *20 ton capacity and 130 kg for4.5 ton capacity} and slings, shall be considered part of the load and must be deducted from rated lifting capacities.4. Without front jack extended, when the boom is within the Over-front, Rated lifting capacities are different from those for the boom in the Over-side and Over-rear.5. Standard number of parts of line for each boom length is as shown below. Load per-line should not surpass 42.2 kN {4,300 kgf} for main winch rope and 44.1 kN {4,500 kgf} for auxiliary winch rope.*: OptionalBoom Length11.1 m15.0 m18.8 m26.6 m34.3 m38.1 m42.0 m Jib/Single topNumber of parts of line**13/1210754441**: With single top (When the lifting capacities is 55,000 kg)6. Special weather caution: Refer to the operation and maintenance manual.7. For rated lifting capacity of single top, subtract the main hook mass from the relevant boom rated lifting capacity. Rated lifting capacity of single top should not exceed 4,500 kg.8. Load radius shown in the table includes the deflection of the boom. Therefore, perform it according to the load radius. However for the jib3.005010001000100050100 LoadTelescoping I III III III III, II I, II15.0 m42.0 m38.1 mLoad15.0 m11,1004,3009,40013,50013,30016,4002,9003,50014,0002,10020,0005,10020,0003,8008,0006,80012,70018.01,50016.0 1,10028,0006,70014,0001,90014.011,1001,30028,0001,00012.0 3,0005,3003,80011.012,0001,8002,1003,000 2,70010.0 4,8004,700 6,1009.0 3,9004,2005,900 5,5008.0 7,9006,4007,500 9,1007.5 6,6007,0008,300 8,0007.0 10,5008,90010,600 12,3006.5 9,60010,00012,200 11,80020,0006.0 14,60012,80015,800 17,7005.5 14,60015,10019,200 18,7005.0 18,90020,20026,300 19,7004.5 24,90025,50028,000 28,0004.0 20,00032,00032,000Outriggers extended to middle 4.6 m20,00032,0003.5 28,0001,00028,0009,7008,5002,3003,5002,70014,0005,80010,1004,50011,9008,7007,5001,6004,6003,8008,0001,2001,8007,1008,0005,6008,0008,0008,0002,6004,2003,4001,4006,5008,0005,2008,0008,0002,2003,8003,0001,0006,1008,0004,8008,0007,9001,900UNIT : kg CLASS OF CRANE ; C3033033666610010010003303366661001001000330336666100100100radius (m)Mode2nd boom3rd boom4th boomTop boomTelescoping conditions(%)boomboom boom11.1 m34.3 m boomboom26.6 m boom18.8 m boomradius (m)boomboom11.1 m26.6 m boom18.8 m boom10,400050100010003.0Telescoping conditions(%)Telescoping I III IIII, II5,1002,1004,3008,8006,1007,3001,60010,4008,8002,10010,8001,4003,6003,0007,60022,1003,40012,5005,70021,7001,1002,7001,6006,5002,2001,800 2,9001,1001,4002,300 2,000 3,9002,7003,300 4,5002,6002,9003,500 3,200 5,2004,0004,800 6,0004,0004,3005,300 5,00020,0007,0005,7006,900 8,3006,1006,5007,900 7,600 9,8008,40011,9009,5009,90012,500 12,100 14,60013,10016,900Outriggers extended to minimum 2.39 m18,60022,80015,90016,3005,0004,4000330336603303366UNIT : kg •@CLASS OF CRANE ; C33.54.04.55.05.56.06.57.07.58.09.010.011.012.0Mode2nd boom3rd boom4th boom73o80o75o78o77o79o76oB oomangle53o55o58o60o63o65o68o70o5o offset3,5003,5003,5003,4003,2503,1002,8402,4302,2001,9501,7801,3501,05068047025o offset4105909201,1801,4501,5801,7301,8502,0202,1602,2402,3002,3002,3001,3001,3001,3001,2801,2601,2401,2001,1501,1201,0701,0301,00085055045o offset2,3501,8902,1002,2202,5008001,0801,2201,3301,5001,6402,5002,5005005o offset1,1701,0701,1201,1401,2007508008509109501,0001,2001,20048025o offset69065067068070056057058059062063070070042045o offset9.0 m jib14.6 m jib42.0 m boom2,300Outriggers fully extended 6.8 m50o3,5003,5003,5003,4003,2503,1002,8402,4302,2001,9501,7801,5501,3801,1508401,0801,2001,2801,4501,5801,7301,8502,0202,1602,2402,3002,3002,3001,3001,3001,3001,2801,2601,2401,2001,1501,1201,0701,0301,0009809402,3501,8902,1002,2202,5001,0001,0801,2201,3301,5001,6402,5002,5008901,1701,0701,1201,1401,2007708008509109501,0001,2001,2007306906506706807005605705805906206307007005502,30038.1 m boom ( telescoping mode II ) or less than that1,000 5407108209201,000UNIT : kg CLASS OF CRANE ; C3BoomangleOutriggers fully extended 6.8 m1,000 920 8201,000Outriggers fully exended 6.8 m7102,3005507007006306205905805705607006806706506907301,2001,2001,0009509108508007701,2001,1401,1201,0701,1708902,5002,5001,6401,5001,3301,2201,0801,0002,5002,2202,1001,8902,3509409801,0001,0301,0701,1201,1501,2001,2401,2601,2801,3001,3001,3002,3002,3002,3002,2402,1602,0201,8501,7301,5801,4501,2801,2001,080540 8401,1501,3801,5501,7801,9502,2002,4302,8403,1003,2503,4003,5003,5003,50034.3 m boom ( telescoping mode I ) or less than thatUNIT : kg CLASS OF CRANE ; C3 5o offset25o offset45o offset5o offset25o offset45o offset9.0 m jib14.6 m jib73o80o75o78o77o79o76o53o55o58o60o63o65o68o70oUNIT : kg CLASS OF CRANE ; C3Boomangle9.0 m jib14.6 m jib5o offset25o offset45o offset5o offset25o offset45o offset 50o73o80o75o78o77o79o76o53o55o58o60o63o65o68o70o80o73o75o78o77o79o76oBoomangle5o offset3,5003,5003,0802,5502,0901,7001,07025o offset1,3001,5802,3002,3002,2801,3001,3001,3001,2801,2601,07045o offset2,1901,4701,8002,5002,5002,5005o offset1,1701,0101,1401,2001,2001,20025o offset69067068070070070045o offset9.0 m jib14.6 m jib42.0 m boom1,910Outriggers extended to middle 4.6 m3,5003,5003,5003,4002,9102,4801,7801,9002,2002,3002,3002,3001,3001,3001,3001,2801,2601,2402,3502,1002,2202,5002,5002,5001,1701,1201,1401,2001,2001,20069067068070070070038.1 m boom ( telescoping mode II ) or less than that2,3001,01070o6501,0701,5201,1601,3902,30034.3 m boom ( telescoping mode I ) or less than that7007006907006706801,2001,2001,2001,1401,1201,1702,5002,5002,5002,2202,1002,3501,2401,2601,2801,3001,3001,3002,3002,3002,3002,2001,9001,7802,4802,9103,4003,5003,5003,5001,390 1,160 1,520 1,070 650 1,010UNIT : kg CLASS OF CRANE ; C3UNIT : kg CLASS OF CRANE ; C3Outriggers extended to middle 4.6 m9.0 m jib14.6 m jib5o offset25o offset45o offset5o offset25o offset45o offset 80o73o75o78o77o79o76oBoomangleUNIT : kg CLASS OF CRANE ; C3Outriggers extended to middle 4.6 m9.0 m jib14.6 m jibBoomangle70o80o73o75o78o77o79o76o5o offset25o offset45o offset5o offset25o offset45o offsetWORKING AREAFrontD C1. Applicable rated lifting capacities change as the ranges of the working area, depending on the outrigger extension width and whether the front jack is used.2. When the swing automatic stop cancel switch is canceled, the swing does not automatically stop even if the crane becomes overloaded.A:Over-front areaB:Over-rear areaC :Over-side area (right)D:Over-side area (left)E:Rated lifting capacity (capacity with outriggers atminimum extension)F:Rated lifting capacity (capacity with outriggers at middleextension)G:Rated lifting capacity (capacity with outriggers at fullextension)H:Minimum extension width of outriggersI:Middle extension width of outriggersJ:Full extension width of outriggersK:Position of outrigger jack with the beam not extendedL:Position of outrigger jack with the beam extendedhalfwayM:Position of outrigger jack with the beam extended fullyN:Front jackFront jack extendedFL outrigger extended to fully, FR outrigger extended to fullyRL outrigger extended to middle, RR outrigger extended to fullyFront jack not extendedFL outrigger extended to fully, FR outrigger extended to minimumRL outrigger extended to middle, RR outrigger extended to minimum ReferenceMEMO-- 11 --Printed in Japan-- 12 --TADANO LTD. (International Headquarters)4-12, Kamezawa 2-chome, Sumida-ku, Tokyo 130-0014, Japan Tel : +81-(0)3-3621-7752 Fax : +81-(0)3-3621-7785 URL http://www.tadano.co.jp/indexe.htm **********************.jp Specifications are subject to change without notice.。
5t汽车起重机参数(xct5l5)
(m)
6.4
最大起升高度
*
基本臂
(m)
10.2
最长主臂
(m)
41
最长主臂+副臂
(m)
50.2
最长主臂+副臂+加长节
(m)
起重臂长度
*
基本臂
(m)
10.8
最长主臂
(m)
42
最长主臂+副臂
(m)
51
最长主臂+副臂+加长节
(m)
-
工作速度
*
最大回转速度
(r/min)
2.(m)
27
最大爬坡能力
(%)
45
最小离地间隙
(mm)
260
接近角
(°)
12
离去角
(°)
14
制动距离
(m)
≤10(车速为30km/h)
百公里油耗
(L)
30
主要性能参数
*
最大额定总起重量
(t)
25
最小额定幅度
(m)
3
基本臂最大起重力矩
(kN·m)
1132
转台尾部回转半径
(mm)
3340
支腿
*
纵向
(m)
5.65
动力参数
*
发动机型号
-
SC9DF290.1Q4/SC9DF290.2Q4
发动机额定功率
(kw/(r/min))
213/1900
发动机最大扭矩
(N.m/(r/min))
1400/1400
行驶参数
*
行驶
*
最高行驶速度
(km/h)
90
(完整版)各吨位吊车起重参数
吊车吨位参数表
起重臂长度,作业半径与允许起重量对照表(机型QUY35、35t)
起重臂长度,作业半径与允许起重量对照表(机型SCC508、50t)
起重臂长度,作业半径与允许起重量对照表(机型神钢335、35 t)
起重臂长度,作业半径与允许起重量对照表(机型神钢440、40 t)
起重臂长度,作业半径与允许起重量对照表(机型株社LS—78RS、35t)
起重臂长度,作业半径与允许起重量对照表(机型QY25汽车吊、25t)
起重臂长度,作业半径与允许起重量对照表(机型KH150、40t)
(机型神钢5045、45t)
(机型DH500、50t)
起重臂长度,作业半径与允许起重量对照表(机型CCH35、35t)
起重臂长度,作业半径与允许起重量对照表(机型DH400、40t)
起重臂长度,作业半径与允许起重量对照表(机型)。
75t汽车起重机参数(XCT75)
基本臂
(m)
12.7
最长主臂
(m)
48
最长主臂+副臂
(m)
65
最长主臂+副臂+加长节
-
74
起重臂长度
基本臂
(m)12.4最长主臂 Nhomakorabea(m)
48
最长主臂+副臂
-
65.5
最长主臂+副臂+加长节
(m)
74.5
工作速度
最大回转速度
(r/min)
2
起升速度
主起升机构
-
145
副起升机构
-
90
起重臂伸缩时间
全伸
(s)
发动机额定功率
(kw/(r/min))
268/1900 265/1900
汽车吊性能参数表
8--500吨汽车吊性能参数表8吨汽车起重机性能表 (2)20吨汽车吊机额定性能表 (3)25吨汽车起重机起重性能表(主臂) (4)30吨汽车起重机性能表(一) (6)50吨汽车起重机性能表(主表) (8)80吨汽车起重机起重性能表(一) (10)100t汽车吊性能表 (12)120吨汽车起重机起重性能表 (13)150吨汽车起重机性能表(一) (14)150吨汽车起重机性能表(二) (15)160t汽车吊性能表 (16)200吨汽车吊车 (17)260吨吊车性能表 (18)LTM1300/1-300t全液压汽车吊机 (19)LTM1500-500t全液压汽车吊机 (21)LTM1500-500t全液压汽车吊机 (22)8吨汽车起重机性能表主要技术参数 6.95m吊臂8.50m吊臂10.15m吊臂11.70m吊臂参数名称参数工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)全车总重15.50t 3.27.5 8.0 3.49.2 6.7 4.210.6 4.2 4.912.0 3.2 最大爬坡能力22% 3.77.1 5.4 4.08.8 4.5 5.010.1 3.1 5.811.4 2.4 吊臂最大仰角 4.3 6.5 4.0 4.78.3 3.4 5.79.6 2.5 6.710.8 1.9 吊臂全伸时长度11.70m 4.9 5.7 3.2 5.47.6 2.7 6.68.8 1.9 7.79.9 1.4 吊臂全缩时长度 6.95m 5.5 4.6 2.6 6.2 6.8 2.2 7.57.7 1.5 8.88.6 1.0 最大提升高度12.00m 6.9 5.6 1.8 8.4 6.3 1.2 9.77.0 0.9 最小工作半径 3.20m 7.5 4.2 1.5 9.0 4.8 1.0 10.5 5.2 0.8 最小转弯半径9.20m20吨汽车吊机额定性能表以下工况仅供参考,实际请与本公司业务员联系!25吨汽车起重机起重性能表(主臂)以下工况仅供参考,实际请与本公司业务员联系!(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)25吨汽车起重机起重性能表(副臂)30吨汽车起重机性能表(一)以下工况仅供参考,实际请与本公司业务员联系!主要技术参数主臂起重性能工作半径(m)支腿全伸不用支腿名称参数10.00m17.00m24.00m31.00m10.00m 全车总重32.2t 3.0030.00 20.00 8.00 最大爬坡能力31% 3.3530.00 20.00 7.00 最大提升高度34.00m 3.5028.10 20.00 6.40 吊臂全伸时长度31.00m 4.0024.20 20.00 5.10 吊臂全缩时长度10.00m 4.5021.40 20.00 13.00 4.20 最小转弯半径11.50m 4.820.00 20.00 13.00 3.70 最大仰角80° 5.019.20 19.20 13.00 3.40 30t吊钩重0.35t 5.517.50 17.50 13.00 2.80 12t吊钩重0.20t 6.016.00 16.00 13.00 2.30 4t吊钩重0.10t 6.514.60 14.60 13.00 9.00 1.90 10m吊臂时钢丝绳数8根7.013.50 13.50 12.00 9.00 1.60 10-17m时钢丝绳数5根7.512.00 12.00 11.20 9.00 1.30 24m时钢丝绳数4根8.010.50 10.50 10.50 9.00 1.00 31m时钢丝绳数3根8.59.40 9.40 9.009.87.20 7.20 7.7010.0 6.95 6.95 7.5011.0 5.80 5.80 6.4012.0 4.90 4.90 5.5514.0 3.45 3.45 4.2016.0 2.50 3.2018.0 1.80 2.4520.0 1.30 1.9022.00.85 1.5024.0 1.1026.00.7527.00.65(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)30吨汽车起重机性能表(二)吊臂角度工作半径使用8.45m 副臂倾角5°吊臂角度工作半径使用13.5m副臂倾角5°80°7.9 4.00 80°9.3 2.5078.5°9.5 4.00 77°12.0 2.5078°10.2 3.80 76°12.7 2.35 76°11.2 3.30 74°14.1 2.10 74°12.2 2.90 72°15.6 1.95 72°13.4 2.70 70°17.1 1.80 70°14.6 2.50 68°18.5 1.65 68°16.0 2.35 66°19.9 1.50 66°17.3 2.20 64°21.3 1.40 64°18.5 2.10 62°22.7 1.30 62°19.8 2.05 60°24.0 1.20 60°20.7 1.85 58°25.3 1.15 58°21.9 1.65 55°27.1 1.05 55°23.6 1.30 54°27.70.95 54°24.1 1.15 52°28.80.80 52°25.00.95 50°29.90.65 50°25.80.75 48°30.90.55 48°26.80.60注:1、若副臂在工作位置,但仍用主臂吊装,主臂的起重性能应相应的减去1.4t2、使用副臂吊装时,主臂的角度不得大于45,否则将倾翻50吨汽车起重机性能表(主表)以下工况仅供参考,实际请与本公司业务员联系!不支第五支腿,吊臂位于起重机前方或后方;支起第五支腿,吊臂位于侧方、后方、前方工作半径(m)主臂长度(m)10.7018.0025.4032.7540.103.050.003.543.004.038.004.534.005.030.0024.705.528.0023.506.024.00 22.20 16.306.521.0020.0015.007.018.50 18.00 14.10 10.208.014.5014.0012.409.207.509.011.50 11.20 11.10 8.30 6.5010.09.2010.007.50 6.0012.0 6.40 7.50 6.80 5.2014.0 5.10 5.70 4.6016.0 4.00 4.70 3.9018.0 3.10 3.70 3.3020.0 2.20 2.90 2.9022.0 1.60 2.30 2.4024.0 1.80 2.0026.0 1.40 1.5028.0 1.2030.00.90各臂伸缩率(%)二0 100 100 100 100 三0 0 33 66 100 四0 0 33 66 100 五0 0 33 66 100钢丝绳倍率12 8 5 4 3吊钩重量0.515 0.215 (注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)50吨汽车起重机性能表(副臂)吊臂位于起重机侧方或后方主臂仰角(°)吊臂长度(m)40.10+5.10主臂+副臂40.10+9.00主臂+副臂40.10+16.10主臂+副臂0°20°0°20°0°20°78 4.0 3.6 3.2 1.9 1.5 0.8 75 3.8 3.2 3.0 1.8 1.30.8 72 3.2 2.9 2.8 1.7 1.2 0.7 70 3.0 2.5 2.5 1.6 1.20.6 65 2.5 2.0 2.0 1.4 1.1 0.5 60 1.9 1.6 1.5 1.00.80.5 55 1.4 0.8 1.0 0.6 0.6 0.4各节臂伸缩率(%) 二100 三四五钢丝绳倍率 1 吊钩重量0.180吨汽车起重机起重性能表(一)以下工况仅供参考,实际请与本公司业务员联系!主臂起重性能表工作半径(m)吊臂长度(支腿全伸)吊臂长度(不伸支腿) 12.0m18.0m24.0m30.0m36.0m40.0m44.0m12.0m2.580.0 45.0 15.03.080.045.035.015.03.580.0 45.0 35.0 15.04.070.045.035.011.74.562.0 45.0 35.0 27.0 9.55.056.040.032.027.08.05.550.0 37.0 29.2 27.0 22.06.86.045.034.327.225.022.0 5.86.539.4 31.5 25.3 23.2 22.0 18.0 5.07.035.629.123.721.520.318.0 4.38.027.8 25.4 21.0 18.8 17.7 15.7 12.0 3.29.520.820.817.815.714.613.212.0 2.010.019.2 19.2 17.0 15.0 13.8 12.6 11.4 1.711.016.515.613.512.411.410.411.814.7 14.7 12.6 11.4 10.6 9.712.014.214.212.411.210.49.513.012.5 12.5 11.3 10.2 9.3 8.814.610.010.010.09.08.57.815.09.4 9.4 9.4 8.7 8.2 7.616.08.18.18.17.77.117.8 6.2 6.2 6.2 6.8 6.320.0 4.5 4.5 4.5 5.1 5.622.0 3.4 3.4 4.0 4.423.0 3.0 3.0 3.5 3.926.0 1.7 2.2 2.627.0 1.9 2.228.0 1.6 1.930.0 1.0 1.331.0 1.180吨汽车起重机起重性能表(二)主要技术参数副臂起重性能主臂仰角支腿全伸在两侧或后部吊装名称参数44m 主臂+9.5m 副臂5°夹角 44m 主臂+15m 副臂5°夹角 工作半径(m)起重性能(t)工作半径(m)起重性能(t)全车总重 63.00t 81.3° 10.0 6.00 11.5 4.00 主臂全伸时长度 44.00m 80.4°11.06.0012.64.00主臂全缩时长度 12.00m 80.1° 11.3 5.90 13.0 4.00 最大仰角 82° 78.6° 13.0 5.20 14.6 3.75 最大爬坡能力 16%75.2°16.04.4018.23.05最小转弯半径 15.40% 70.8° 20.0 3.60 22.5 2.55最大提升高度58.50m 66.0°24.0 3.00 27.2 2.10 80t 主吊钩重 1t 63.8° 26.0 2.75 29.1 2.05 80t 辅助吊钩重0.5t58.0° 30.3 1.50 34.01.206t 副吊钩重 0.25t 55.4°32.01.20100t汽车吊性能表120吨汽车起重机起重性能表以下工况仅供参考,实际请与本公司业务员联系!工作半径(m)主臂长度(m)12.612.616.620.624.528.532.536.540.544.548.552.556.03120 1113.510710292495 94 88 81 694.586827566579 76 70 62 516666662554940756 56 55 49 44.5 38 32 23.6848.54847444038.53222.120.1942 41.5 40.5 40 36.5 32.5 29.8 21.3 19.9 15.8103736.535.535.533.530.527.921.319.715.814.912.6 1229.1 28 28.9 27.8 26.2 24.5 21.3 18.7 15.8 14.5 11.8 1424.822.723.522.522.521.618.916.81513.311.1 1618.3 19.4 18.4 19 19.1 16.9 15.1 13.6 12.2 10.3 1815.815.815.216.816.31513.512.311.19.6 2013.2 13.8 14.1 14.2 13.4 12.2 11.1 10.2 8.9 2211.512.412.212.111.710.910.19.48.3 2410.7 10.5 10.4 10 9.9 9.2 8.6 7.7 269.39.298.58.68.387.2 288 8 7.3 7.4 7.6 7.4 6.7 3077.2 6.5 6.3 6.5 6.9 6.3 32 6.3 6 5.6 6 6.1 5.8 34 5.5 5.6 5.2 5.6 5.3 5.2 36 5.1 4.8 5.1 4.5 4.5 38 4.7 4.5 4.44 3.9 40 4.2 4 3.5 3.7 42 3.9 3.6 3.2 3.5 44 3.2 2.8 2.7 46 2.6 2.4 2.7 48 2 2 50 1.7 1.7 52 1.4 54 1.2150吨汽车起重机性能表(一)以下工况仅供参考,实际请与本公司业务员联系!(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)150吨汽车起重机性能表(二)吊臂回转至后部及两侧时吊装性能工作半径(m)吊臂长度 (m)13.917.721.325.028.732.336.039.643.152.83.0 140.03.6 131.3 65.9 64.44.0 122.6 65.0 63.74.5 109.2 65.0 63.7 56.65.0 100.2 64.9 61.2 55.46.0 80.3 64.9 56.5 51.7 46.6 41.27.0 68.9 62.0 52.5 47.2 43.9 37.8 33.1 31.58.0 58.7 57.1 48.1 44.6 39.0 34.4 31.9 30.39.0 49.5 49.3 44.8 40.9 35.8 31.9 29.5 27.1 27.510.0 43.041.9 41.6 35.6 33.4 29.6 27.4 25.3 24.912.0 31.9 31.9 31.3 27.7 24.6 22.6 22.0 21.3 17.6 14.0 24.624.6 24.6 24.6 21.4 20.3 19.3 18.2 15.9 16.0 18.518.518.518.4 17.5 16.8 15.4 13.7 18.0 14.7 14.7 14.7 14.714.7 14.4 12.5 12.0 20.0 11.8 11.8 11.8 11.811.8 11.4 10.6 23.0 8.5 8.5 8.5 8.58.59.0 26.0 6.2 6.2 6.2 6.2 6.2 7.6 29.0 4.4 4.3 4.2 4.2 6.1 32.0 2.9 2.9 2.1 4.3 35.0 1.7 1.7 2.8 38.0 0.3 2.0 41.0 1.2 44.0 1.0(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)160t汽车吊性能表200吨汽车吊车260吨吊车性能表LTM1300/1-300t全液压汽车吊机LTM1300/1-300t全液压汽车吊机主臂额定性能表:支腿开距=8.85×8.5m、旋转角度=360°、标准配重=87.5t。
55t汽车起重机参数(XCT55L6)
尺寸参数
整机全长 整机全宽 整机全高
轴距 轮距
重量参数
行驶状态总质量 轴荷
动力参数
发动机型号 发动机额定功率 发动机额定扭矩
行驶参数 行驶
最高行驶速度 最低稳定行驶速度
转弯
最小转弯直径 臂头最小转弯直径
最大爬坡度 最小离地间隙
接近角 离去角 制动距离 百公里油耗
主要性能参数
最大额定总起重量 最小额定幅度
* 、SC10E340Q4 268/1900、251/1900 1800/1000-1400、1550/1300
* * 90 ~3 * 24
45
16(含前防护 10°) 13
≤10 35 * 55 3
2058 3830
*
*
*
基本臂 最?长?主?臂 最?长?主?臂?+?副?臂 最?长?主?臂?+?副?臂+加长节
工作速度
最大回转速度
起升速度
主起升机构 副起升机构
起重臂伸缩时间
全伸 全缩
变?幅?时?间
全程起臂 全程落臂
支?腿?收?放--水?平
同?时?放--水?平 同?时?收--水?平
支?腿?收?放--垂?直
同?时?放 同?时?收
(m)
(m)
50
-
66
(m)
-
*
(r/min)
2
*
-
130
-
130
*
(s)
350
-
-
*
(s)
50
(s)
-
*(s)30(源自)20*(s)
30
(s)
20
精心搜集整理,只为你的需要
汽车吊性能参数表
8--500吨汽车吊性能参数表8吨汽车起重机性能表220吨汽车吊机额定性能表325吨汽车起重机起重性能表〔主臂〕430吨汽车起重机性能表〔一〕750吨汽车起重机性能表〔主表〕980吨汽车起重机起重性能表(一)11100t汽车吊性能表13120吨汽车起重机起重性能表15150吨汽车起重机性能表(一)16150吨汽车起重机性能表(二)17160t汽车吊性能表18200吨汽车吊车19260吨吊车性能表20LTM1300/1-300t全液压汽车吊机21LTM1500-500t全液压汽车吊机23LTM1500-500t全液压汽车吊机248吨汽车起重机性能表主要技术参数 6.95m吊臂8.50m吊臂10.15m吊臂11.70m吊臂参数名称参数工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)工作半径(m)起升高度(m)起重量(t)全车总重15.50t 3.27.5 8.0 3.49.2 6.7 4.210.6 4.2 4.912.0 3.2 最大爬坡能力22% 3.77.1 5.4 4.08.8 4.5 5.010.1 3.1 5.811.4 2.4 吊臂最大仰角 4.3 6.5 4.0 4.78.3 3.4 5.79.6 2.5 6.710.8 1.9 吊臂全伸时长度11.70m 4.9 5.7 3.2 5.47.6 2.7 6.68.8 1.9 7.79.9 1.4 吊臂全缩时长度 6.95m 5.5 4.6 2.6 6.2 6.8 2.2 7.57.7 1.5 8.88.6 1.0 最大提升高度12.00m 6.9 5.6 1.8 8.4 6.3 1.2 9.77.0 0.9 最小工作半径 3.20m 7.5 4.2 1.5 9.0 4.8 1.0 10.5 5.2 0.8 最小转弯半径9.20m20吨汽车吊机额定性能表以下工况仅供参考,实际请与本公司业务员联系!14.0 —————— 2.49 2.53 2.56 2.58 1.416.0———————— 1.9 1.94 1.96 1.218.0 —————————— 1.45 1.47 120.0———————————— 1.080.8822.0 ————————————0.76 0.7524.0——————————————0.6327.0 ——————————————0.525吨汽车起重机起重性能表〔主臂〕以下工况仅供参考,实际请与本公司业务员联系!工作半径(m)吊臂长度(m)10.213.7517.320.8524.427.9531.5325 17.53.520.6 17.5 12.2 9.5418 17.5 12.2 9.54.516.3 15.3 12.2 9.5 7.5514.5 14.4 12.2 9.5 7.55.513.5 13.2 12.2 9.5 7.5 7612.3 12.2 11.3 9.2 7.5 7 5.1 6.511.2 11 10.5 8.8 7.5 7 5.1 710.2 10 9.8 8.5 7.2 7 5.1 7.59.4 9.2 9.1 8.1 6.8 6.7 5.1 88.6 8.4 8.47.8 6.6 6.4 5.1 8.587.97.8 7.4 6.3 7.2 5 97.2 7 6.8 6 6.1 4.810 6 5.8 5.6 5.6 5.3 4.412 4 4.1 4.1 4.2 3.9 3.714 2.9 3 3.1 2.9 316 2.2 2.3 2.2 2.318 1.6 1.8 1.7 1.720 1.3 1.3 1.322 1 0.9 1240.7 0.8 260.5 0.5 280.4 290.3 30(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)25吨汽车起重机起重性能表〔副臂〕主臂主角7.5副臂副臂倾角5度副臂倾角30度80度 2.5 1.25 75度 2.5 1.25 70度 2.05 1.15 65度 1.75 1.1 60度 1.55 1.05 55度 1.3 1.0 50度 1.05 0.830吨汽车起重机性能表〔一〕以下工况仅供参考,实际请与本公司业务员联系!主要技术参数主臂起重性能工作半径〔m 〕 支腿全伸 不用支腿 名称 参数 10.00m 17.00m 24.00m31.00m10.00m 全车总重 32.2t 3.00 30.00 20.00 8.00 最大爬坡能力 31% 3.35 30.00 20.00 7.00 最大提升高度 34.00m 3.50 28.10 20.00 6.40 吊臂全伸时长度 31.00m 4.00 24.20 20.00 5.10 吊臂全缩时长度 10.00m 4.50 21.40 20.00 13.00 4.20 最小转弯半径 11.50m 4.8 20.00 20.00 13.00 3.70 最大仰角 80° 5.0 19.20 19.20 13.00 3.40 30t 吊钩重 0.35t 5.5 17.50 17.50 13.00 2.80 12t 吊钩重 0.20t 6.0 16.00 16.00 13.002.30 4t 吊钩重 0.10t 6.5 14.60 14.60 13.00 9.00 1.90 10m 吊臂时钢丝绳数 8根7.013.5013.5012.00 9.00 1.6010-17m 时钢丝绳数 5根 7.5 12.00 12.00 11.20 9.00 1.30 24m 时钢丝绳数 4根 8.0 10.5010.50 10.50 9.00 1.0031m 时钢丝绳数 3根8.5 9.40 9.40 9.00 9.8 7.20 7.20 7.70 10.0 6.95 6.95 7.50 11.0 5.80 5.80 6.40 12.0 4.90 4.90 5.55 14.0 3.45 3.45 4.20 16.0 2.50 3.20 18.0 1.80 2.45 20.0 1.30 1.90 22.0 0.851.50 24.0 1.10 26.0 0.7527.00.65(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)30吨汽车起重机性能表〔二〕吊臂角度工作半径使用8.45m 副臂倾角5°吊臂角度工作半径使用13.5m副臂倾角5°80°7.9 4.00 80°9.3 2.5078.5°9.5 4.00 77°12.0 2.5078°10.2 3.80 76°12.7 2.35 76°11.2 3.30 74°14.1 2.10 74°12.2 2.90 72°15.6 1.95 72°13.4 2.70 70°17.1 1.80 70°14.6 2.50 68°18.5 1.65 68°16.0 2.35 66°19.9 1.50 66°17.3 2.20 64°21.3 1.40 64°18.5 2.10 62°22.7 1.30 62°19.8 2.05 60°24.0 1.20 60°20.7 1.85 58°25.3 1.15 58°21.9 1.65 55°27.1 1.05 55°23.6 1.30 54°27.70.95 54°24.1 1.15 52°28.80.80 52°25.00.95 50°29.90.65 50°25.80.75 48°30.90.55 48°26.80.60注:1、假设副臂在工作位置,但仍用主臂吊装,主臂的起重性能应相应的减去1.4t2、使用副臂吊装时,主臂的角度不得大于45,否那么将倾翻50吨汽车起重机性能表〔主表〕以下工况仅供参考,实际请与本公司业务员联系!不支第五支腿,吊臂位于起重机前方或前方;支起第五支腿,吊臂位于侧方、前方、前方工作半径(m)主臂长度(m)10.7018.0025.4032.7540.103.050.003.543.004.038.004.534.005.030.0024.705.528.0023.506.024.00 22.20 16.306.521.0020.0015.007.018.50 18.00 14.10 10.208.014.5014.0012.409.207.509.011.50 11.20 11.10 8.30 6.5010.09.2010.007.50 6.0012.0 6.40 7.50 6.80 5.2014.0 5.10 5.70 4.6016.0 4.00 4.70 3.9018.0 3.10 3.70 3.3020.0 2.20 2.90 2.9022.0 1.60 2.30 2.4024.0 1.80 2.0026.0 1.40 1.5028.0 1.2030.00.90各臂二0 100 100 100 100伸缩率〔%〕三0 0 33 66 100 四0 0 33 66 100 五0 0 33 66 100钢丝绳倍率12 8 5 4 3 吊钩重量0.515 0.215(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)50吨汽车起重机性能表〔副臂〕吊臂位于起重机侧方或前方主臂仰角〔°〕吊臂长度〔m〕40.10+5.10主臂+副臂40.10+9.00主臂+副臂40.10+16.10主臂+副臂0°20°0°20°0°20°78 4.0 3.6 3.2 1.9 1.5 0.8 75 3.8 3.2 3.0 1.8 1.30.8 72 3.2 2.9 2.8 1.7 1.2 0.7 70 3.0 2.5 2.5 1.6 1.20.6 65 2.5 2.0 2.0 1.4 1.1 0.5 60 1.9 1.6 1.5 1.00.80.5 55 1.4 0.8 1.0 0.6 0.6 0.4各节臂伸缩率(%) 二100 三四五钢丝绳倍率 1 吊钩重量0.180吨汽车起重机起重性能表(一)以下工况仅供参考,实际请与本公司业务员联系!主臂起重性能表工作半径(m)吊臂长度(支腿全伸)吊臂长度(不伸支腿) 12.0m18.0m24.0m30.0m36.0m40.0m44.0m12.0m2.580.0 45.0 15.03.080.045.035.015.03.580.0 45.0 35.0 15.04.070.045.035.011.74.562.0 45.0 35.0 27.0 9.55.056.040.032.027.08.05.550.0 37.0 29.2 27.0 22.06.86.045.034.327.225.022.0 5.86.539.4 31.5 25.3 23.2 22.0 18.0 5.07.035.629.123.721.520.318.0 4.38.027.8 25.4 21.0 18.8 17.7 15.7 12.0 3.29.520.820.817.815.714.613.212.0 2.010.019.2 19.2 17.0 15.0 13.8 12.6 11.4 1.711.0 16.5 15.6 13.5 12.4 11.4 10.4 11.8 14.7 14.7 12.6 11.4 10.6 9.7 12.0 14.2 14.2 12.4 11.2 10.4 9.5 13.0 12.5 12.5 11.3 10.2 9.3 8.8 14.6 10.0 10.0 10.0 9.0 8.5 7.8 15.0 9.49.4 9.4 8.7 8.2 7.6 16.0 8.1 8.1 8.1 7.7 7.1 17.8 6.2 6.2 6.2 6.8 6.3 20.0 4.5 4.5 4.5 5.1 5.6 22.0 3.4 3.4 4.0 4.4 23.0 3.03.0 3.5 3.9 26.0 1.7 2.2 2.6 27.0 1.9 2.2 28.0 1.6 1.9 30.0 1.01.3 31.01.180吨汽车起重机起重性能表(二)主要技术参数副臂起重性能主臂仰角支腿全伸在两侧或后部吊装名称 参数 44m 主臂+9.5m 副臂5°夹角 44m 主臂+15m 副臂5°夹角 工作半径(m)起重性能(t)工作半径(m)起重性能(t)全车总重 63.00t 81.3° 10.0 6.00 11.5 4.00 主臂全伸时长度 44.00m80.4°11.06.0012.64.00主臂全缩时长度 12.00m 80.1° 11.3 5.90 13.0 4.00 最大仰角 82° 78.6° 13.0 5.20 14.6 3.75 最大爬坡能力 16%75.2°16.04.4018.23.05最小转弯半径 15.40% 70.8° 20.0 3.60 22.5 2.55最大提升高度 58.50m 66.0° 24.0 3.00 27.2 2.10 80t 主吊钩重 1t 63.8° 26.0 2.75 29.1 2.05 80t 辅助吊钩0.5t58.0°30.31.5034.01.20100t汽车吊性能表120吨汽车起重机起重性能表以下工况仅供参考,实际请与本公司业务员联系!工作半径(m)主臂长度(m)12.612.616.620.624.528.532.536.540.544.548.552.556.03120 1113.510710292495 94 88 81 694.586827566579 76 70 62 516666662554940756 56 55 49 44.5 38 32 23.6848.54847444038.53222.120.1942 41.5 40.5 40 36.5 32.5 29.8 21.3 19.9 15.8103736.535.535.533.530.527.921.319.715.814.912.6 1229.1 28 28.9 27.8 26.2 24.5 21.3 18.7 15.8 14.5 11.8 1424.822.723.522.522.521.618.916.81513.311.1 1618.3 19.4 18.4 19 19.1 16.9 15.1 13.6 12.2 10.3 1815.815.815.216.816.31513.512.311.19.6 2013.2 13.8 14.1 14.2 13.4 12.2 11.1 10.2 8.9 2211.512.412.212.111.710.910.19.48.3 2410.7 10.5 10.4 10 9.9 9.2 8.6 7.7 269.39.298.58.68.387.2 288 8 7.3 7.4 7.6 7.4 6.7 3077.2 6.5 6.3 6.5 6.9 6.3 32 6.3 6 5.6 6 6.1 5.8 34 5.5 5.6 5.2 5.6 5.3 5.2 36 5.1 4.8 5.1 4.5 4.5 38 4.7 4.5 4.44 3.9 40 4.2 4 3.5 3.7 42 3.9 3.6 3.2 3.5 44 3.2 2.8 2.7 46 2.6 2.4 2.7 48 2 2 50 1.7 1.7 52 1.4 54 1.2150吨汽车起重机性能表(一)以下工况仅供参考,实际请与本公司业务员联系!(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)150吨汽车起重机性能表(二)吊臂回转至后部及两侧时吊装性能工作半径(m)吊臂长度(m)13.917.721.325.028.732.336.039.643.152.83.0 140.03.6 131.3 65.9 64.44.0 122.6 65.0 63.74.5 109.2 65.0 63.7 56.65.0 100.2 64.9 61.2 55.46.0 80.3 64.9 56.5 51.7 46.6 41.27.0 68.9 62.0 52.5 47.2 43.9 37.8 33.1 31.58.0 58.7 57.1 48.1 44.6 39.0 34.4 31.9 30.39.0 49.5 49.3 44.8 40.9 35.8 31.9 29.5 27.1 27.510.0 43.041.9 41.6 35.6 33.4 29.6 27.4 25.3 24.912.0 31.9 31.9 31.3 27.7 24.6 22.6 22.0 21.3 17.6 14.0 24.624.6 24.6 24.6 21.4 20.3 19.3 18.2 15.9 16.0 18.518.518.518.4 17.5 16.8 15.4 13.7 18.0 14.7 14.7 14.7 14.714.7 14.4 12.5 12.0 20.0 11.8 11.8 11.8 11.811.8 11.4 10.6 23.0 8.5 8.5 8.5 8.58.59.0 26.0 6.2 6.2 6.2 6.2 6.2 7.6 29.0 4.4 4.3 4.2 4.2 6.1 32.0 2.9 2.9 2.1 4.3 35.0 1.7 1.7 2.8 38.0 0.3 2.0 41.0 1.2 44.0 1.0(注:本表内红字及红字以上栏目的数字为吊臂强度所决定,其下面栏目数字为倾翻力矩决定)160t汽车吊性能表200吨汽车吊车260吨吊车性能表LTM1300/1-300t全液压汽车吊机LTM1300/1-300t全液压汽车吊机主臂额定性能表:支腿开距=8.85×8.5m、旋转角度=360°、标准配重=87.5t。
汽车吊结构图与性能表
LIEBHERR LG1750 (670t )外形图一LG1750 (670t )外形图二LG1750 (670t )外形图三LG1750 (670t )R(m)H( )m 020*******48121624283236444852566468727684m4812162024283236404448525660646872768084889296100m主臂起升高度图一LG1750 主臂起重性能表一(支腿16×16m, 360°,配重850t)支腿尺寸16000×16000, 行驶速度80km/h,吊钩重量:750t---16000KG, 400t---15000KG, 312t---8400KG, 215t---7500KG,107t---5500KG, 47t---3000KG, 16t---1100KG.LG1750 (670t )R(m)H( )m 020*******48121624283236444852566468727684m4812162024283236404448525660646872768084889296100m主臂起升高度图二LG1750 主臂起重性能表二(支腿12×12m, 360°,配重830t)LG1750 (670t )048121620242832364044485256606468727680m4812162024283236404448525660646872768084889296100104108112116120124128132136140144148mR(m)H ( )m主臂起升高度图三LG1750 主臂起重性能表三(支腿12×12m, 360°,配重465t)LG1750 (670t )R(m)H ( )m 081624324048566472808896104112m04812162024283236404448525660646872768084889296100104108112116120124128132136140144148152156160164168m副臂起升高度图LG1750 副臂起重性能表一(全支腿,16×16m,360°,配重850t)LG1750 副臂起重性能表二(全支腿,16×16m,360°,配重850t)LG1750 副臂起重性能表三(全支腿,16×16m,360°,配重850t)DEMAG AC700 (700t)外形图DEMAG AC700 (700t)H ( )mR(m)5550454035302520151050051015202530354045505560657075808590mHA 工况起升高度图AC700 HA工况主臂起重性能表一配重140t,全支腿,360°。
汽车吊起重性能表
16.5 16.3 16.13 15.94 15.32 15.5 15.48 15.25 14.91 14.68 14.36 13.63 12.77 10.53 6.94
2 1.93 1.86
1.8 1.74 1.64 1.55 1.39 1.13 0.85 0.64 0.48
23 22.87 22.68 22.49 22.29 21.84 21.33 20.12
3
23
13.5
2
3.5
20
13.5
4
17.9
13.5
7
4.7
15
13.5
7
2
5
14 12.75
7
6
11 10.75
7
4
1.6
7
9.1
8.7
7
4
7.5
8.1
7.7
7
4
8
7.25
6.9
6.55
4
1.3
9
5.5
5.8
4
10
4.4
5
4
10.5
4
4.55
4
1.1
11
3.6
4.15
3.8
12
3
3.5
3.4
13
2.5
2.3
2.7
2.7
1.8
0.5
14
1.5
1.85
2.1
1.65
16
1.25
1.55
1.4
18
0.85
1.15
1.2
20
0.5
0.8
0.95
22
0.6
0.75
55t汽车起重机参数(ct55l6)
(m) *
基本臂
(m)
最长主臂
(m)
最 长 主 臂+副 臂
(m)
最 长 主 臂 + 副 臂+加长节
-
起重臂长度
*
基本臂
(m)
最长主臂
(m)
50
最 长 主 臂+副 臂
-
66
最 长 主 臂 + 副 臂+加长节
(m)
-
工作速度
*
最大回转速度
起升速度
(r/min)
2
*
主起升机构
-
130
副起升机构
起重臂伸缩时间
-
130
*
全伸
(s)Байду номын сангаас
350
全缩
-
-
变幅时间
*
全程起臂
(s)
50
全程落臂
(s)
-
支 腿 收 放--水 平
*
同 时 放--水 平
(s)
30
同 时 收--水 平
(s)
20
支 腿 收 放--垂 直
*
同时放
(s)
30
同时收
(s)
20
* 44000 9000+9000+13000×2
* 、SC10E340Q4 268/1900、251/1900 1800/1000-1400、1550/1300
* * 90 ~3 * 24
45
16(含前防护 10°) 13
≤10 35 * 55 3
2058 3830
支腿
*
纵向
(m)
横向
最大起升高度
55t汽车起重机参数(XCT55L6)
-
66
最 长 主 臂 + 副 臂+加长节
(m)
-
工作速度
*
最大回转速度
(r/min)
2
起升速度
*
主起升机构
-
130
副起升机构
—
130
起重臂伸缩时间
*
全伸
(s)
350
全缩
—
—
变幅时间
*
全程起臂
(s)
50
全程落臂
(s)
-
支 腿 收 放—-水 平
*
同 时 放—-水 平
(s)
30
同 时 收--水 平
(s)
20
基本臂最大起重力矩 转台尾部回转半径
支腿
纵向 横向
最大起升高度
基本臂 最长主臂 最长主臂+副臂 最 长 主 臂 + 副 臂+加长节
起重臂长度
单位
参数-Leabharlann XCT55L6*(mm) (mm) (mm)
13650 2540 3770
(mm) (mm)
1470+3700+1350 2124/2124/1834/1834
*
(kg) (kg)
44000 9000+9000+13000× 2
*
(kw/(r/min))
MC11。36—40、SC10E340Q4 268/1900、251/1900
(N。m/(r/min)) 1800/1000—1400、1550/1300
*
*
(km/h)
90
(km/h)
2.5~3
*
(m) (m) (%)
xct55工况表
xct55工况表一、工作原理:根据系统的动力特性,在保证其它性能参数不变的情况下,通过降低发动机的功率来减小发动机的转速,从而达到降低油耗的目的。
由于曲轴旋转角速度的降低,输出功率和扭矩也会相应的减少。
另外,还有通过限制最高转速来减小扭矩的情况。
为此本车控制器提供了三种方式:通过油门踏板直接控制最高转速;通过最高转速设定限值控制最高转速;通过限制最高转速来控制最高转速。
14、极限转速: 3000rpm。
15、功率限制:在工作范围内可调节。
16、设定最高转速: 3000rpm。
17、超过最高转速:设定最高转速- 300rpm。
18、功率: 3000rpm。
19、最大扭矩: 3000rpm。
20、低速: 0rpm。
21、瞬间加速时间: 3秒。
22、静止起步转速:350rpm。
23、经济转速: 1000rpm。
24、发动机启动转速: 600rpm。
25、启动频率: 10次/min。
26、运行频率: 20次/min。
27、车速检测范围: 0- 100公里/小时。
28、整车速度检测范围: 0- 120公里/小时。
25、额定转速: 3000rpm。
26、限制转速: 3000rpm。
27、转矩限制:设定最大转矩。
28、电压设置范围: 7- 13V。
29、速度设置范围: 0- 100公里/小时。
30、瞬间加速时间: 2.9秒。
31、静止起步转速: 350rpm。
32、经济转速: 1000rpm。
33、发动机启动转速: 600rpm。
34、启动频率: 12次/min。
35、运行频率:20次/min。
36、车速检测范围: 0- 60公里/小时。
37、整车速度检测范围: 0- 80公里/小时。
38、速度表显示范围: 0- 120公里/小时。
39、车速表显示范围: 0- 100公里/小时。
40、运行表显示范围: 0- 120公里/小时。
41、整车运行频率: 20次/min。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
(s)
20
-
工作速度
*
最大回转速度
(r/min)
2
起升速度
*
主起升机构
-
130
副起升机构
-
130
起重臂伸缩时间
*
全伸
(s)
350
全缩
-
-
变幅时间
*
全程起臂
(s)
50
全程落臂
(s)
-
支 腿 收 放--水 平
*
同 时 放--水 平
(s)
30
同 时 收--水 平
(s)
20
支 腿 收 放--垂 直
*
同时放
(s)
30
同时收
项目 参数项
尺寸参数
整机全长 整机全宽 整机全高
轴距 轮距
重量参数
行驶状态总质量 轴荷
动力参数
发动机型号 发动机额定功率 发动机额定扭矩
行驶参数 行驶
最高行驶速度 最低稳定行驶速度
转弯
最小转弯直径 臂头最小转弯直径
最大爬坡度 最小离地间隙
接近角 离去角 制动距离 百公里油耗
主要性能参数
最大额定总起重量 最小额定幅度
(t) (m) (kN·m) (mm)
(m) (m)
(m) (m) (m)
-
参数 XCT55L6
* 13650 2540 3770 1470+3700+1350 2124/2124/1834/1834
* 44000 9000+9000+13000× 2
* MC11.36-40、SC10E340Q4
268/1900、251/1900 1800/1000-1400、ห้องสมุดไป่ตู้550/1300
基本臂最大起重力矩 转台尾部回转半径
支腿
纵向 横向
最大起升高度
基本臂 最长主臂 最长主臂+副臂 最 长 主 臂 + 副 臂+加长节
起重臂长度
单位 -
(mm) (mm) (mm) (mm) (mm)
(kg) (kg)
(kw/(r/min)) (N.m/(r/min))
(km/h) (km/h)
(m) (m) (%) (mm) (°) (°) (m) (L)
* * 90 2.5~3 * 24 26.2 45 303.5 16(含前防护 10°) 13 ≤10 35 * 55 3 2058 3830 * 8.035 7.3 * 10.7 49.1 63.8
*
基本臂
(m)
11.2
最长主臂
(m)
50
最长主臂+副臂
-
66
最 长 主 臂 + 副 臂+加长节
(m)