弹性卡簧标准大全

合集下载

弹性卡簧标准大全

ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceDIN METRIC*Available on Special Order Only.**Military Standard References have a four digit dash number.The first digit identifies the material and finish.The last three digits indicate the size of the ring.eg:MS 16625 -1025=1300-25 CD (Carbon Steel, Cadmium Dichromate) (We no longer supply)2025=1300-25 ZD (Carbon Steel, Zinc Dichromate)3025=1300-25 PP (Carbon Steel, Standard Phosphate)4025=1300-25 AS (Stainless Steel, Passivate)5025=1300-25 C (Beryllium Copper)12A R C O NAR ONARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceCONTENTS - Stamped &Metric RingsN1300pages 8 - 9N1302page 101305page 111308page 111400pages 12 - 131405/1465page 141440/1460page 151500page 161540page 161800page 175304T5304page 18D1500page 19D1400pages 20 - 21D1300pages 22 - 23WA/AARpage 17DIN 6799DIN 471DIN 472STANDARD INTERNALBEVELED INTERNALPUSH-ON INTERNALBALANCED LUGINTERNALSTANDARD EXTERNALPUSH-ON/HEAVY DUTY PUSH-ON EXTERNAL GRIP RING/ HEAVY DUTY GRIP RINGEXTERNALE-RING EXTERNALREINFORCEDE-RING EXTERNALC-RING EXTERNALMETRIC EXTERNALMETRIC INTERNALCRIMP RINGKLIPRING ®EXTERNALMETRIC “E”EXTERNALMETRIC CIRCLIPS3A R C O NAR ONARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceWire / Specialty Rings - CONTENTSEN page 29XANpages 30 - 31pages 32 - 33NANpages 34 - 35INpages 36 - 37pages 38 - 39ND page 40TRCpage 28page 281200page 243200page 251000page 24pages 6 - 7PLIERS KITSDISPENSERS APPLICATORSXRC-XROpage 26XSC-XSOpage 27pages 44 - 45ROUND SECTIONROUND SECTIONEXTERNALINTERNAL RETAININGRINGSPLAIN WIRE RINGSQUARE SECTIONEXTERNALINTERNAL NOTCHED RINGSBEARING SNAPRINGEXTERNALNOTCHED RINGSINTERNALRETAINING RINGS(METRIC)SPIRAL RINGSEXTERNAL RETAININGRINGS INTERNAL RETAININGRINGSRECT ANGULARSECTION EXTERNALEXTERNAL RETAININGRINGSSPRINGS/MISC4ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of Service5ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceImpact LoadingThe maximum acceptable impact load for a circlip assembly may be determined by the use of the following formula:CirclipTci=Tc.t N.m.(ft.lb)Tgi=Tg.d 26ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceKITSDISPENSERSAPPLICATORS•Internal •External •E-Style •Metric•Single Rod •Double Rod•Straight T ip •45°T ip7ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServicePLIERS•Complete Line •Call for InfoFOR REMOVAL OF WIRE FORMED SNAP RINGS (EXTERNALLY APPLIED)THESE PLIERS CONVERT FROMTOUSE WITH THE PUSH OF TWO BUTTONSMin. Gap Required .140" or 3.55 mmMin. Gap Required .170" or 4.32 mmR O U N D ,S Q U A R E ,R E C T A NG U L A R M AT E R I A L R O U N D ,S Q U A R E ,R E C T A NG U L A R M AT E R I A L W ES TOCK:•Fixed Tip Internal Pliers • Fixed Tip External Pliers • Fixed Tip Convertible Pliers• E And C Ring Style ApplicatorsEXTERNALINTERNALALL 3 Sizeswith Case and Tips6 optional tips(included)5 optional tips(included)5 optional tips(included)ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of Service8N13000.250” to 10.00”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 16625STANDARD INTERNALWhen Sprung into Bore When Sprung into Groove9N13000.250” to 10.00”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 16625STANDARD INTERNALARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceWhen Sprung into Bore When Sprung into GrooveARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of Service10N1302 1.00” to 10.00”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 16631BEVELED INTERNALE = Maximum end play take up capability † Thrust load calculations see page 5Sizes up to 10” available When Sprung into Bore When Sprung into Groove13050.311” to 2.002”Standard Material Carbon Spring Steel Standard Finish Phosphate and oil“PUSH-ON”INTERNAL0.625” to 1.562”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 16627BALANCEDLUGINTERNAL1308When Sprung into Bore When Sprung into Groove† Thrust load calculations see page 5† Thrust load calculations see page 514000.125” to 10.00”Standard Material12 to 23 Beryllium Copper 25 up Carbon Spring Steel Standard Finish12 to 23 Self Finish25 up PhosphateMS 16624STANDARDEXTERNALWhen Sprung onto Shaft When Sprung into Groove14000.125” to 10.00”Standard Material12 to 23 Beryllium Copper 25 up Carbon Spring SteelStandard Finish 12 to 23 Self Finish 25 up PhosphateMS 16624STANDARD EXTERNALWhen Sprung onto Shaft When Sprung into Groove14050.093” to 1.002”Standard Material Carbon Spring Steel Standard Finish Phosphate and oil“PUSH-ON”EXTERNAL14650.091” to 1.005”Standard Material Carbon Spring Steel Standard Finish Phosphate and oil“PUSH-ON”EXTERNAL HEAVY DUTY† Thrust load calculations see page 5† Thrust load calculations see page 514400.077” to .755”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 90707GRIP RING EXTERNALMay be used without grooves14600.394” to 2.00”Standard Material Carbon Spring Steel Standard FinishPhosphate and oilMS 3217HEA VY DUTY EXTERNAL1460-391460-421460-471460-501460-591460-621460-661460-751460-751460-871460-981460-981460-1061460-1121460-1181460-1181460-1251460-1311460-1371460-1371460-1501460-1561460-1561460-1751460-1751460-1931460-1931460-200–––1/2–5/8–3/4–7/863/64111/1611/8–13/1611/415/1613/8–11/219/16–13/4–115/16131/322.394.428.473.500.591.625.669.750.787.875.9841.0001.0621.1251.1811.1881.2501.3121.3751.3781.5001.5621.5751.7501.7721.9381.9692.00010.010.912.012.715.015.917.019.020.022.225.025.427.028.630.030.231.733.334.935.038.139.740.044.445.049.250.050.8.035.035.042.050.050.050.050.078.078.078.078.078.093.093.093.093.093.093.093.093.109.109.109.109.109.125.125.125±.002±.003±.004.362.394.435.460.543.575.616.689.689.804.906.906.9781.0361.0871.0871.1501.2081.2681.2681.3801.4371.431.6081.6081.7821.7821.840+.003-.008+.005-.010+.010-.015+.013.020.58.62.66.72.83.86.901.081.121.201.301.311.461.521.571.571.631.691.751.751.982.052.062.252.272.482.502.53.368.402.444.468.555.588.629.704.740.821.925.938.9981.0591.1111.1111.1741.2341.2911.2911.4061.4681.4801.6501.6691.8261.8501.880+.001-.002+.001-.003+.002-.004+.003-.004.039.039.046.056.056.056.056.086.086.086.086.086.103.103.103.103.103.103.103.103.120.120.120.120.120.139.139.139+.003-.000+.004-.000+.005-.000+.006-.000.70.861.41.62.22.32.65.65.67.57.87.811.512.513.513.514.916.017.817.827.031.031.033.433.448.648.650.620002300300039004500480052009000900010400115001150015000160001650016500175001800019500195002450026000260002900029000370003700038000SHAFT D IAMETER S Frac.Dec.mm inch inchPART NO.RINGT HICKNESSF REE D IAMETER t Tol.D Tol.C1inches inchesinches inchesGROOVE D IAMETER W IDTH G Tol.W Tol.inches inches inches inches A PPROXT HRUSTW T . LB /L OAD 1000(LBS )PCS .1440-311440-351440-371440-391440-431440-501440-551440-591440-621440-75.310.351.372.391.434.496.550.587.620.745.317.357.379.397.440.505.556.593.631.7555/16–3/8–7/161/2–19/325/83/48.09.09.510.011.012.714.015.016.019.0.298.341.354.380.412.470.531.571.593.706+.003-.005±.004+.003-.005±.004+.003-.005+.004-.006.042.047.042.047.050.050.059.059.062.062±.003±.004.67.74.73.76.80.90.991.061.061.30 1.391.761.722.082.612.915.406.165.706.8844506060616576818591Lug design for sizes 7-9-11-19-23-27Beam configuration on some larger sizesWhen Sprung into Groove† Thrust load calculations see page 5SHAFT D IAMETER Smin.max.fractionmm(inch)(inch)~RINGF REE D IAMETERT HICKNESS D Tol.t Tol.Cinches inches inches inchesA PPROX T C +W T . LB /(lb.f)1000PCS .PART NO..077.092.116.123.134.154.185.194.234.247.274.081.096.120.127.138.158.189.200.239.253.2785/643/32–1/8–5/323/16–15/641/4–2.02.43.03.23.54.04.85.06.06.37.0.074.089.112.120.130.150.181.187.224.238.264+.002-.003+.002-.004±.003+.002-.004±.004.024.025.024.025.025.025.035.032.039.035.039±.002±.003.25.26.29.33.31.36.44.44.50.50.54.08.10.14.24.27.30.55.45.85.74.9311111620202325303535401440-71440-91440-111440-121440-131440-151440-181440-191440-231440-251440-27A PPROX T C +W T . LB /(lb.f)1000PCS .RINGF REE D IAMETER T HICKNESS D Tol.t Tol.Cinches inches inches inchesSHAFT D IAMETER Smin.max.fractionmm (inch)(inch)~PART NUM-BER1500.040” to 1.375”Standard Material 4 Beryllium CopperX6 up Carbon Spring Steel Standard Finish 4 Self FinishX6 up PhosphateMS 16633STANDARD E-RING1540.094” to .562”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 3215REINFORCED E-RING EXTERNALWhen Sprung into GrooveWhen Sprung into Groove1800.125” to 2.00”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilMS 16632STANDARD C-RINGWhen Sprung into GrooveInstalled State0.188” to 1.00”C1008 - 1010Obtainable in Stainless SteelWA/AAR RINGS"Crimp Ring"T OLERANCES :Tolerances on “C” dimensions are minus as follows:3/16” to 5/16” sizes 4%3/8” to 1” sizes 3%Tolerances on “O” dimensions are plus as follows:3/16” to 5/16” sizes 4%3/8” to 1” sizes 4%Tolerance on “t” (thickness)dimension are as follows:.031 to .039 sizes ±.002.047 to .125 sizes +.000and -.004G AP :Gap furnished in open position and butted when closed into grooveFree State5304T -53040.156” to 2.00”Standard Material Carbon Spring Steel Standard Finish PhosphateKLIPRING ®EXTERNALWhen Sprung into GrooveFig. 15304-15 and T5304-15 onlySizes -18thru -50Sizes -62thru -100Sizes -125 thru -200(Series 5304 Only)Detail of GrooveD15001.2mm to 31.5mmStandard Material Carbon Spring Steel Standard Finish Phosphate and oilDIN 6799STANDARD METRIC “E”EXTERNALWhen Sprung into Groove† Thrust load calculations see page 5Metric CirclipsD1400 3 mm to 400 mmStandard Material 3 Beryllium Copper4 up Carbon Spring Steel Standard Finish 3 Self Finish and oil 4 up Phosphate and oilDIN 471STANDARD METRIC EXTERNALWhen Sprung onto Shaft When Sprung into Groove† Thrust load calculations see page 5ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service21D14003 mm to 400 mmStandard Material 3 Beryllium Copper 4 up Carbon Spring Steel Standard Finish 3 Self Finish and oil 4 up Phosphate and oilDIN 471STANDARD METRIC EXTERNALWhen Sprung onto Shaft When Sprung into Groove † Thrust load calculations see page 5ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceD13008 mm to 400 mmStandard Material Carbon Spring Steel Standard Finish Phosphate and oilDIN 472STANDARD METRICINTERNAL22When Sprung onto Shaft When Sprung into Groove† Thrust load calculations see page 5ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service23D13008 mm to 400 mmStandard Material Carbon Spring Steel Standard Finish Phosphate and oilDIN 472STANDARD METRICINTERNALWhen Sprung onto Shaft When Sprung into Groove† Thrust load calculations see page 5*I t ii s r r e c o m m e n d e d t t h a t t t h e t t o l e r a n c e o o n G G r o o v e D D i a m e t e r i i s r r e s t r i c t e d , w w h e r e n n e c e s s a r y ,t o mm a i n t a i n t t h e m m i n i m u m g g r o o v e d d e p t h q q u o t e d w w h e n u u s i n g s s h a f t s s s m a l l e r t t h a n n n o m i n a l .† Thrust load calculations see page 5ARCON RINGANDSPECIALTY CORPORATIONOver Thirty Years of Service241200.125” to .625”Standard Material Carbon Spring Steel Standard Finish Self Finish and oilPLAIN WIRE RINGWhen Sprung into Groove10000.062” to 3.00”Standard Material Carbon Spring Steel Standard Finish Phosphate and oilROUND SECTIONARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service25320030mm to 240mmStandard Material Carbon Spring Steel Standard Finish Phosphate and oilDIN 5417WIRE EXTERNAL RINGS FOR BEARING RETENTIONWhen Sprung into Groove† Thrust load calculations see page 5ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of Service260.125” to 3.00”Standard Material Carbon Spring Steel Obtainable inBronze, Beryllium Copper ,and Stainless SteelROUND SECTION EXTERNALXRC900XRO 800T OLERANCES :Tolerances on “D” and “O”dimensions are minus as follows:1/8” to 3/8” sizes 6%7/16” to 1” sizes 5%11/16” to 3” sizes 4%of respective “D” dimension.Tolerance on “t” (thickness)dimensions are as follows:.022 to .250 sizes ±.002ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service270.125” to 3.00”Standard Material Carbon Spring Steel Obtainable inBronze, Beryllium Copper ,and Stainless SteelXSC700XSO 600SQUARE SECTION EXTERNALT OLERANCES :Tolerances on “D” and “O”dimensions are minus as follows:1/8” to 3/8” sizes 6%7/16” to 1” sizes 5%11/16” to 3” sizes 4%of respective “D” dimension.Tolerance on “t” (thickness)dimensions are as follows:.020 to .025 sizes +.003-.002.031 to .046 sizes +.005-.004.055 to .312 sizes +.006-.004ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of Service28TRC0.188” to 1.00”Standard Material Carbon Spring Steel Obtainable inBronze, Beryllium Copper ,and Stainless SteelRECTANGULARSECTION EXTERNALS ECTION :On request, listed sections may be coiled to meet any shaft or housing diameter requirements. eg. (1” shaft dia.(s) X .045 x.025 section (w-t).4” limit on “O” diameterG AP :(Trc type) butted to approximately 1/2wire section dimension.T OLERANCES :Tolerances on “D” dimensions are minus as follows:3/16” to 3/8”sizes 6%13/32” to 1” sizes 5%Tolerances on “t” (thickness) dimension are as follows:.015 to .025 sizes ±5%.035 to .042 sizes ±4%A R C O NAR ONPART NUMBERSHAFT D IAMETER S Frac.Dec.inch inchRINGD IAMETERW IDTH T HICKNESSI NSIDE Outside W t DOinchesinchesGROOVE DIMENSIONS A B Width DepthA PPROXW T . L B /1000 PCS .3/167/321/49/325/1611/323/813/327/1615/321/29/1619/325/811/163/413/167/815/161.188.219.250.281.312.344.375.406.438.469.500.562.594.625.688.750.812.875.9381.000.176.205.230.261.290.322.351.382.412.443.474.534.565.596.656.715.776.833.896.955.226.255.300.331.370.402.431.472.502.533.570.630.685.716.776.855.916.9731.0581.117.025.025.035.035.040.040.040.045.045.045.048.048.060.060.060.070.070.070.081.081.015.015.025.025.025.025.025.025.025.025.035.035.035.035.042.042.042.042.042.042.017.017.028.028.028.028.028.028.028.028.039.039.039.039.046.046.046.046.046.046.007.007.010.010.011.011.012.012.013.013.013.014.0145.0145.016.0175.018.021.021.0225.07.08.20.23.29.32.35.42.45.48.78.901.201.301.702.102.202.302.903.00TRC 813TRC 814TRC 815TRC 816TRC 817TRC 818TRC 819TRC 820TRC 821TRC 822TRC 823TRC 824TRC 825TRC 826TRC 827TRC 828TRC 829TRC 830TRC 831TRC 832Rectangle Wire"Constant Section Rings"SPIRAL RINGSINTERNAL RINGSEXTERNAL RINGS0.500” to 16.00”Standard Material Carbon Spring Steel Obtainable in302,316 Stainless SteelLIGHT DUTY SERIES MEDIUM DUTY SERIES MEDIUM HEAVY DUTY SERIES HEAVY DUTY SERIESARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceEN Applicable Shaft 2.062" to 5.00"Standard Material Carbon Spring SteelEXTERNAL NOTCHED RINGS29ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceXAN Applicable Shaft 0.312" to 1.875"Standard Material Carbon Spring SteelEXTERNAL RETAININGRINGS30ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceXAN Applicable Shaft1.969" to 10.00"Standard MaterialCarbon Spring SteelEXTERNALRETAININGRINGS31ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceApplicable Shaft0.4724" to 4.3307"Standard Material Carbon Spring SteelEXTERNAL RETAININGRINGSA R C O NAR ONPART NUMBERF REEG APM IN . M AX .584594614639R 698R 740R 823916R 974R 1065R 1129R 118512581308R 13781407R 1468R 1517R 1551R 1572R 2919R 1625R 201202203204205206207208209210211212213214215216217218219220221222301302303304305306307308309310311312313314315316317318319320321322403404405406407408409410411412413414415416417418419420421422.4724.5906.6693.7874.98431.18111.37801.57481.77171.96852.16542.36222.55912.75592.95283.14963.34653.54333.74023.93704.13394.330712.0015.0017.0020.0025.0030.0035.0040.0045.0050.0055.0060.0065.0070.0075.0080.0085.0090.0095.00100.00105.00110.00.421.538.616.710.9101.0931.2651.4521.6251.8201.9952.1872.3592.5562.7502.9463.1393.3083.5003.6973.8884.080+.000-.025+.000-.031+.000-.046+.000-.062+.000-.078+.000-.093.062 ±.003.078±.003.093 ±.003.109 ±.003.125 ±.005.156±.005.188±.005.218±.005.250±.005.312±.005.042.047.062.075.093.109.125.156.436.550.629.731.9241.1111.2881.4651.6481.8442.0152.2122.3892.5862.7832.9793.1763.3433.5403.7373.9344.131±.002±.004±.006.046.053.068.085.108.120.139.174.018.020.028.030.035.045.055.062.075.085.100.062.078.156.250.250.250.312.312.187.218.312.406.468.500.625.687+.008-.000+.004-.000+.004-.000+.005-.000+.000-.020+.003-.000+.004-.000+.005-.000+.006-.000BASIC BEARING NUMBERRING DIMENSIONSF REE D IAMETERW IDTH T HICK D Tol.W T inches inches ±.005±.002GROOVED IA .W IDTHN OM .CTol.AD EPTH BS SHAFT DIA. OR BEARING BORE Decimal Equiv.32ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceApplicable Shaft 0.8661" to 9.4488"Standard Material Carbon Spring SteelEXTERNAL RETAININGRINGSA R C O NAR ONPART NUMBER1957743-4781-220462976-1939-295410391117-23918-11245-622611356-73919-11438-51490-51534-43920-11598-11642-331261675-416931706-31730-53921-11744-51764-11773-21787-11849-12165-23922-13923-13924-13925-13926-11021031041051061071081091101111121131141151161171181191201211221241261281 301 3237-38200201202203204205206207208209210211212213214215216217218219220221222224226300301302303304305306307308309310311312313314315316317318319320321322403404405406407408409410411412413414415416417418223032353740424752556268727580859095100110115120125130140145150160170180190200210215225230240.86611.18111.25981.37801.45671.57481.65351.85042.04722.16542.44092.67722.83462.95283.14963.34653.54333.74023.93704.33074.52764.72444.92135.11815.51185.70875.90556.29926.69297.08667.48037.87408.26778.46468.85839.05519.4488.7991.0941.1721.2911.3541.4851.5501.7411.9432.0562.3222.5272.6842.8032.9993.1963 3923.5903.7864.1804.3774.5064.7034.9005.2945.4915.6886.0816.4136.8077.2007.5947.9878.1848.5788.7759.168+.000-.020+.000-.030+.000-.046+.000-.062+.000-.093+.000-.125+.000-.156.094.125.156.188.281.375.042.065.095.109.120.81251.1091.1871.3061.3691.5001.5651.7561.9582.0712.3472.5522.7092.8283.0243.2213.4173.6153.8114.2054.4024.5364.7334.9305.3245.5215.7186.1116.4436.8377.2307.6248.0188.2158.60838.80519.1988 1.0001.3591.4371.5471.6091.7501.8122.0622.2652.3752.6562.9223.0783.2033.4063.5943.7973.9844.1874.5784.7815.0945.2975.5005.8906.0786.2816.6727.1877.5947.9848.3758.7668.9699.3289.5629.9531/8max.3/32±1/321/8±1/325/32±3/643/16±1/169/32±1/163/8±1/1615/32±3/32.035.050.060.075.0902.75.66.06.67.07.87.811.012.112.821.929.130.832.134.236.756.559.762.168.772.2128.8136.0139.5150.4155.0160.9171.7267.4284.4300.1309.1319.0338.4349.0362.0375.4+.000-.015RING DIMENSIONS—FREEF REE I.D.W IDTH T HICK I.D.Tol.W T±.005±.002GROOVE D IA .CASSEM-BLED O.D.OGAP XX GRADIUS MAX R WEIGHTPER MBEARING O.D. (M.M.)Inches DDBEARING NUMBER Extra LightMed.HeavyLight33ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceNAN Applicable Housing 0.375" to 2.688"Standard Material Carbon Spring SteelINTERNAL RETAININGRINGSThis style only on R-NAN 37 thru R-NAN 7534ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceNAN Applicable Housing 2.717" to 10.000"Standard Material Carbon Spring SteelINTERNAL RETAININGRINGS35ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceIN Applicable Housing 1.750" to 3.625"Standard Material Carbon Spring SteelINTERNAL NOTCHED RINGSA R C O NAR ONRINGF REE D IAMETERW IRE S ECTION D Tol.W T inches inches ±.005±.002PART NUMBERG AP GMin.T HRUSTL OAD L BS .IN175IN181IN185IN187IN193IN200IN206IN206IN212IN218IN218IN225IN231IN237IN244IN250IN253IN256IN262IN268IN268IN275IN281IN281IN287IN295IN300IN306IN312IN315IN315IN325IN334IN347IN350IN354IN354IN36213/4113/16–17/8115/16223/6421/1621/8–23/1621/425/1623/8–21/2217/3229/1625/8–211/1623/4213/16–27/8–331/1631/8–35/3231/4311/32315/3231/2–39/1635/8 1.7501.8121.8501.8751.9382.0002.0472.0622.1252.1652.1882.2502.3122.3752.4402.5002.5312.5622.6252.6772.6882.7502.8122.8352.8752.9533.0003.0623.1253.1493.1563.2503.3463.4693.5003.5433.5623.62544.4546.0247.0047.6349.2050.8052.0052.3753.9855.0055.5557.1558.7260.3361.9863.5064.2965.0766.6868.0068.2569.8571.4272.0073.0375.0076.2077.7779.3879.9880.1682.5584.9988.1188.9090.0090.4792.08 1.8781.9421.9822.0142.0812.1472.2012.2012.2712.3382.3382.4022.4702.5372.6042.6732.7062.7392.8062.8682.8682.9443.0253.0253.0863.1753.2223.2883.3533.3883.3883.4883.5903.7213.7603.8053.8053.895+.070-.000+.080-.000+.100-.000.156.171.188.203.218.234.062.078.093.1091.8581.9221.9621.9892.0562.1222.1712.1862.2512.2952.3182.3822.4502.5172.5842.6482.6812.7142.7812.8372.8482.9142.9803.0053.0513.1353.1823.2483.3153.3413.3483.4463.5463.6753.7103.7553.7763.841±.005±.006.068.086.103.120.054.055.056.057.059.061.062.063.065.066.069.071.072.074.075.076.078.080.082.084.085.088.091.091.093.095.096.098.100.103.105.106.107.108.370.400.420.450.430.470.450.470.530.560.590.660.620.650.680.710.740.810.740.078.085.093.100.109.120.093.1254100428043804650500053506490649068107240724075608120858089409410966099101042010900109001147012200122001287013480138901449015110154201542016210170301819018700194001940019930+.005-.000+.005-.000+.004-.000+.005-.000HOUSING D IAMETER S Frac.Dec.mminch inchNOTCHD EPTHW IDTH ND NW +.000Ref.-.030GROOVED IA .W IDTHN OM .CTol.AD EPTH B36ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of ServiceIN Applicable Housing 3.740" to 10.000"Standard Material Carbon Spring SteelINTERNAL NOTCHED RINGSA R C O NAR ON PART NUMBERG AP GMin.T HRUSTL OAD L BS .IN375IN375IN387IN393IN400IN412IN425IN433IN450IN462IN475IN475IN500IN525IN537IN550IN575IN600IN625IN650IN662IN675IN700IN725IN750IN775IN800IN825IN850IN875IN900IN925IN950IN975IN1000–33/437/8315/16441/841/4–41/245/8–43/4551/453/851/253/4661/461/265/863/4771/471/273/4881/481/283/4991/491/293/410 3.7403.7503.8753.9384.0004.1254.2504.3314.5004.6254.7244.7505.0005.2505.3755.5005.7506.0006.2506.5006.6256.7507.0007.2507.5007.7508.0008.2508.5008.7509.0009.2509.5009.75010.00095.0095.2598.43100.00101.60104.78107.95110.00114.30117.48120.00120.65127.00133.35136.53139.70146.05152.40158.75165.10168.28171.45177.80184.15190.50196.85203.20209.55215.90222.25228.60234.95241.30247.65254.00 4.0304.0304.1654.2344.3004.4304.5554.6414.8154.9405.0705.0705.3405.6005.7355.8606.1206.3806.6406.9057.0457.1807.4457.7057.9758.2408.5058.7709.0359.3059.5649.83310.10010.36510.630+.100-.000+.120-.000+.150-.000+.180-.000+.220-.000.250.281.312.343.375.437.500.109.125.156.1873.9643.9744.1074.1744.2404.3654.4904.5714.7404.8654.9694.9955.2605.5205.6505.7706.0206.2706.5306.7906.9257.0557.3157.5757.8408.1008.3608.6208.8809.1449.4049.6689.93010.19010.450±.006±.007±.008.120.139.174.209.112.116.118.120.122.130.135.140.145.150.152.157.162.170.175.180.185.190.197.202.209.215.220.225.740.780.810.840.910.9301.0001.0301.0901.1201.1301.1401.1501.1601.2001.2301.2701.3201.3701.4001.5001.6201.750.125.140.156.171.187.218.250.125.125.125.125.125.125.125.125.156.156.156.156.156.156.156.156.156.156.156.156.156.156.156.187.187.187.187.187.187.187.187.187.187.187.1872138021380228802365024430251902596026450274902825029000290003310036070369303779039500412204453047970505805222055930597006490068700729007760081800873009240098000103900109000114600+.008-.000+.008-.000+.005-.000+.006-.000HOUSING D IAMETER S Frac.Dec.mminch inchNOTCHD EPTHW IDTH ND NW +.000Ref.-.030GROOVED IA .W IDTHN OM .CTol.AD EPTH BRINGF REE D IAMETERW IRE S ECTION D Tol.W T inches inches ±.005±.00237ARCON RINGANDSPECIALTY CORPORATIONOver Thirty Years of ServiceApplicable Housing 1.1811" to 3.5433"Standard Material Carbon Spring SteelINTERNAL RETAININGRINGS (METRIC)38ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of ServiceApplicable Housing 3.9370" to 7.8740"Standard Material Carbon Spring SteelINTERNAL RETAININGRINGS (METRIC)39ARCON RINGANDSPECIALTY CORPORATION Over Thirty Years of ServiceND Applicable Housing 1.125" to 8.000"Standard Material Carbon Spring SteelINTERNAL RETAININGRINGS40WIRE RETAINING RING QUOTE FORM Fill this space in with your part number and revision so we may reference it on your quotation.What quantities would you like us to quote on?:1. __________________2. __________________3. __________________4. __________________Choose one of the following options:H Internal Ring H External Ring Choose one of the following options:H Dimensions in free stateH Dimensions in assembled state Choose one of the following options:H Material is round H Material is squareH Material is rectangular1.) Material Size and Tolerance? ________________________________________2.) MaterialH Carbon Spring Steel H Music Wire H Stainless SteelH 302H 316H 17-7H Brass H CopperH Berylium CopperH Other ________________________________________ARCON RINGANDSPECIALTY CORPORATIONOver Thirty Years of Service123 EASY STREET • CAROL STREAM, IL 60188P HONE : 630-682-5252•F AX : 630-682-5259T OLL F REE : 800-498-1462 • info@41。

卡簧规格尺寸-WORD版

轴用弹性挡圈尺寸表标称 d 0轴用挡圈dsd 1d 2mndd 3≧1 2 3标准尺标准尺寸极限偏差寸极限偏差最小标准尺寸极限偏差标准尺寸极限偏差最小109.3109.6 0 0.6 17.6-0.0581110.21.511 10.50.818.6 12 1112 11.519.613 11.913 12.40.920.8 14 12.9 +0.1014 13.4221513.8 -0.36+0.0515 14.3+0.141.1 23.21 1.7-0.1116161.114.7-0.1315.21.224.4 17 15.717 16.225.6 1816.518 17 27 1917.519 182820 18.5+0.13220 19 0 1.529 21 19.521 2031 -0.42-0.132220.5222132标称 d0d1 2 3 标准尺寸极限偏差s标准尺寸极限偏差挡圈d1dd2m最小标准尺寸极限偏差标准尺寸极限偏差nd3≧最小2422.2 2523.22624.2+0.21 2825.9-0.422926.93027.9 3229.63431.5 3532.23633.2+0.21-0.50 3734.23835.2 4036.54238.5 4541.5+0.39 4844.5-0.90 5045.85247.8 5550.85651.85853.86055.86257.86358.8 6560.8+0.466863.5-1.10 7065.57267.5 7570.57873.58074.58276.5 8579.58882.5 9084.5 9589.5 10094.510598+0.54 110103-1.30115108120113+0.051.2-0.13+0.061.5-0.15+0.062-0.182.5+0.07-0.2232422.92523.922624.92826.62927.63028.63230.33432.335332.53634373538364037.54239.54542.54845.55047524955525653585560576259636065623686570677269757278758076.58278.58581.58884.59086.59591.510096.51051011101061151114120116-0.21 1.30 1.7-0.25+0.142.22.7-0.302.7-0.35+0.18-0.543.20341.7353638.42.139.842442.64648493505153563.859.462.864.86770.471.773.675.8794.579.681.68587.289.492.896.298.21011045.3107.31101151211321361426145125118125121-0.63151孔用弹性挡圈尺寸表标称 d0s1d d标准尺孔用挡圈d2mdnd3≧123 标准尺寸极限偏差寸极限偏差最小标准尺寸极限偏差标准尺寸极限偏差最小88.799.8 1010.81111.8+0.36 1213-0.101314.1 1415.1 1516.2 1617.3 1718.3 1819.51920.5+0.42 2021.5-0.132122.5 2223.5+0.040.61-0.070.8+0.04 1.5-0.101.71+0.05-0.13288.4+0.090.799.401010.41111.41212.50.91313.6+0.111414.60+0.141515.701616.8 1.21717.818191920+0.132021 1.5212222230.6230.94456781.19101112标称d0s d1d123 标准尺寸极限偏差标准尺寸极限偏差最小孔用挡圈d0d2m标准尺寸极限偏差标准尺寸极限偏差nd3≧最小2425.9+0.422526.9-0.2126227.92830.1 1.2+0.05 -0.133032.13133.43234.4+0.503436.5-0.253537.82.53638.83739.83840.81.5+0.064043.5-0.15+0.904245.5-0.394548.54750.54851.55054.25256.25559.25660.22+0.065862.2-0.18+1.106064.2-0.466266.236367.26569.26872.57074.57276.57579.52.5+0.077882.5-0.22 8085.5+1.308287.5-0.548590.58893.52425.22526.22627.22829.43031.43132.73233.73435.735373638373938404042.54244.54547.54749.54850.5505352555558565958616063626563666568687170737275757878818083.58285.58588.58891.5+0.21 1.82.12.6+0.2533.8+0.14+0.304.5+0.350 5.31314151.3 1718192022232425261.72729313233363840412.24344454648505355562.76063656870孔用挡圈标称 d0d s d1d2m nd3≧1 2 3标准尺d0标准尺寸极限偏差寸极限偏差最小标准尺寸极限偏差标准尺寸极限偏差最小9095.59093.5729297.59295.5+0.35+0.147395100.5 2.539598.5 5.3 2.7780098103.598101.578 100105.5+1.30100103.580102108-0.54+0.071021068210511210510983-0.22108108115112+0.54861101173411011406+0.183.288112119112116089115122+1.3011511990120127120124+0.6395 -0.631251250132129100孔用弹性挡圈尺寸表。

卡簧国际标准

卡簧国际标准卡簧是一种机械弹性元件，常用于固定、连接和支撑零部件。

它们通常由高强度的弹簧钢或不锈钢制成，并具有较强的弹性恢复力。

卡簧的国际标准化是为了确保其在全球范围内的一致性和互换性。

以下是一些卡簧的国际标准的相关参考内容：1. ISO 8752:1995 - 弹簧销套卡簧该标准规定了直径从0.8mm到20mm的弹簧销套卡簧的尺寸和技术要求。

它包括了材料规格、弹性特性、外观要求、加工误差和标记等内容。

2. ISO 13337:2017 - 弹簧销头卡簧该标准规定了弹簧销头卡簧的尺寸和技术要求。

它适用于用于连接圆形孔的弹簧销套卡簧，包括了外径、内径、圆角半径、长度和厚度等尺寸要求。

3. ISO 3912:2012 - 外压形卡簧该标准规定了外压形卡簧的尺寸和技术要求。

它包括了压力、局部伸长、抗拉强度、硬度和冲击强度等弹簧特性的要求。

4. ISO 13335:2012 - 内压形卡簧该标准规定了内压形卡簧的尺寸和技术要求。

它包括了压力、恢复量、弹性系数、表面处理和材料要求。

5. ISO 8750:2008 - 平行销小卡簧该标准规定了平行销小卡簧的尺寸和技术要求。

它适用于连接孔和螺纹的弹簧销套卡簧，包括了直径、长度和最大分离力等尺寸要求。

6. ISO 11685:2016 - 内摩擦型卡簧该标准规定了内摩擦型卡簧的尺寸和技术要求。

它包括了摩擦系数、弹性恢复力、表面处理和材料要求等内容。

这些国际标准的制定旨在提供一个共同的参考框架，以确保卡簧的制造商能够根据统一的规范生产产品，并保证其互换性和可靠性。

同时，这些标准也为使用卡簧的企业提供了明确的选择和指导，使他们能够在设计和生产过程中遵循国际最佳实践，从而提高产品质量和性能。

然而，需要注意的是，以上内容仅为参考，具体的标准和规范仍需参考最新的国际标准文件，并且在实际应用中需要根据具体情况进行必要的调整和验证。

为了确保卡簧的质量和可靠性，建议生产企业和使用者必须依照当地和国际标准进行合理的设计、选择和加工。

卡簧规格尺寸大全

卡簧规格尺寸大全
弹簧卡簧由其力学结构来看是一种安装在设备上的弹性机械元件，使之能够在不同的温度和湿度下连续展开和收缩，以实现几乎无限的次数。

它具有自动耦合，缓冲，平衡，开关和调整功能等特点，因此非常适合用于汽车，机械设备，医疗仪器等领域。

弹簧卡簧规格尺寸大致可分为厚度，宽度，提升距离，端部圆环尺寸，绞轧尺寸，颜色等。

1. 厚度：指弹簧卡簧片的厚度，一般有0.1mm至25mm，根据使用条件来确定。

3. 提升距离：指安装好的弹簧卡簧提升距离，有0.1mm至50mm，也可根据客户需要特殊订制。

6. 颜色：指安装完毕后的弹簧卡簧外观颜色，常见有黄色，红色，蓝色，绿色，黑色等。

为了保证使用性能，制造商会根据不同环境和使用条件精心设计和制造弹簧卡簧的规格尺寸，以满足客户的需求和使用要求，因此每种规格尺寸的弹簧卡簧都有独特的优势和功能，可以根据实际使用条件来选择适合的尺寸和规格。

在此基础上，根据客户需求，还可以配合特殊的加工工艺，将弹簧卡簧制作得更加精确而持久，更加准确的满足客户的使用需求。

卡簧标准尺寸规格表

卡簧标准尺寸规格表英文回答：Card spring, also known as wave spring or disc spring,is a type of spring that is widely used in variousindustries for its compact size and high load-bearing capacity. It is typically made of high-quality spring steel and has a unique wave-like shape, which allows it to exerta constant force over a wide range of deflections. The standard size and specifications of card springs arecrucial for ensuring their compatibility and effectivenessin different applications.In terms of dimensions, card springs come in various sizes, including different outer diameters, inner diameters, and thicknesses. These dimensions are standardized toensure interchangeability and compatibility with other components. For example, a common standard size for card springs may have an outer diameter of 25mm, an inner diameter of 15mm, and a thickness of 0.5mm. Thesedimensions can vary depending on the specific application and load requirements.Furthermore, the material used for card springs is also specified in the standard size and specifications. Spring steel is the most commonly used material due to its excellent mechanical properties, such as high tensile strength and good elasticity. The standard may specify the type of spring steel, such as AISI 301 or AISI 1074, and the required hardness or tempering process to achieve the desired spring characteristics.In addition to dimensions and material, the standard size and specifications of card springs may also include other parameters, such as the number of waves or turns, the pitch distance between waves, and the maximum deflection or load capacity. These parameters determine the spring's performance and suitability for different applications. For example, a card spring with more waves or turns will have a higher load capacity but may require more space for installation.It is important to follow the standard size and specifications when selecting and using card springs to ensure their proper functioning and compatibility withother components. Using card springs that do not meet the standard dimensions or material requirements may result in poor performance, premature failure, or even safety hazards.中文回答：卡簧，也被称为波形弹簧或片簧，是一种被广泛应用于各个行业的弹簧，因其紧凑的尺寸和高承载能力而备受青睐。

最全卡簧标准

0.14 0
0
15.2
-0.11
1.1
0.14 0
0 0.14
0 0.14
0 0.14
0
n ≥
0.6
0.8
0.8
0.9
0.9
1.1
1.2
0.5 0.5 0.6 0.6 孔 d3 ≤ 17.6 18.6 19.6 20.8 22 23.2 24.4
0.1
0.05
0
0.14
17
15.7
-0.36
1
-0.13
29 27.6 26.9 39.1 1.6 1.5
30 28.6 27.9 40.5 1.6 1.5
32 30.3 29.6 43 1.6 1.5
34 32.3 31.5 45.4 1.6 1.5
35 33 32.2 46.8 1.6 1.6
36 34 33.2 47.8 1.85 1.75
轴径槽径卡簧内径卡簧外径槽宽卡簧厚度
1.3
0
2.1
38.4
0.21
0.05
0
0.14
29
26.9
-0.42
1.2
-0.13
2
27.6
-0.21
1.3
0
2.1
39.8
0.21
0.05
0
0.14
30
27.9
-0.42
1.2
-0.13
2
28.6
-0.21
1.3
0
2.1
42
0.21
0.05
0
0.14
32
29.6
1.2
2.5
30.3

孔用卡簧标准规格表

孔用卡簧标准规格表孔用卡簧是一种常见的机械零部件，广泛应用于各种机械设备中。

它具有弹性好、耐磨、耐腐蚀等特点，能够提供稳定的支撑和连接作用。

为了更好地了解和选择适合自己需求的孔用卡簧，以下是一份孔用卡簧标准规格表，供大家参考。

1. 规格型号，孔用卡簧的规格型号主要包括直径、厚度、材质等方面的参数。

常见的规格型号有，GB879.1-4-2000、GB879.5-2000、GB879.6-2000等。

其中，GB879.1-4-2000规定了孔用卡簧的直径范围、公差、材质等；GB879.5-2000规定了孔用卡簧的厚度范围、公差、材质等；GB879.6-2000规定了孔用卡簧的材质、硬度要求等。

2. 材质选择，孔用卡簧的材质一般有65Mn、60Si2MnA、50CrVA等。

不同的材质具有不同的弹性和耐腐蚀性能，用户在选择时应根据具体使用环境和要求进行合理选择。

3. 表面处理，孔用卡簧的表面处理一般采用镀锌、喷漆等方式，以提高其耐腐蚀性能和美观度。

用户在选择时可以根据具体需要进行选择。

4. 使用注意事项，在使用孔用卡簧时，应注意安装方向、受力方向等，避免因使用不当而导致的失效。

同时，在存放和搬运过程中，应注意轻拿轻放，避免碰撞和变形。

5. 品牌选择，市面上有各种不同品牌的孔用卡簧，用户在选择时可以根据自己的实际需求和对品牌的信赖度进行选择。

总结，孔用卡簧作为一种重要的机械连接件，其规格型号、材质选择、表面处理、使用注意事项和品牌选择等方面都需要用户进行合理选择。

通过了解和掌握孔用卡簧的标准规格表，可以更好地选择和使用适合自己需求的孔用卡簧，提高机械设备的使用性能和安全性。

以上就是关于孔用卡簧标准规格表的相关内容，希望对大家有所帮助。

卡簧规格尺寸

48 50.5 50 53 52 55
33
+0.14
0
36
38
55 58
40
56 59 58 61
41 2.2
43
60 63 +0.30
44
62 65
0
45
4.5
63 66
46
65 68
48
68 71
50
70 73
53
72 75
55
75 78 78 81
56 2.7
60
80 83.5
63
82
85.5
14
26 27.2 0
15
28 29.4 30 31.4
1.3 17 2.1
18
31 32.7
19
32 33.7
2.6
20
34 35.7
22
35 37
23
36 37
38 39
+0.25 0
3
24 25
38 40 40 42.5
26 1.7
27
42 44.5
29
45 47.5
3.8
31
47 49.5
32
标准尺寸极限偏差标准尺寸极限偏差最小
8
8.4 +0.09
0.7
9
9.4
0
0.6 2
10 10.4
11 11.4
3
12 12.5
0.9
0.9 4
13 13.6 +0.11
4
14 14.6 0
5
15 15.7
+0.14 0
6
16 16.8

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Forms a barrier between the steel substrate and
ZP
the corrosive environment. It is preferentially
Zinc Dichromate** attacked, forming sacrificial anodes in the circuit
5304 T5304
page 18
KLIPRING® EXTERNAL
METRIC CIRCLIPS
DIN 6799
D1500
page 19 METRIC “E”
EXTERNAL
DIN 471
D1400
pages 20 - 21 METRIC
EXTERNAL
DIN 472
D1300
pages 22 - 23 METRIC
not as toxic as Cadmium, it is not recommended for use
where prolonged contact with foodstuffs is involved.
Z
ZB
ZF
ZD ZD
ZD
*Bright finish rings are clear passivated to improve resistance to finger stains and normal darkening during storage. **Dichromate is a post-plating process, improving corrosion resistance and restricting the formation of “white rust” on Zinc plated surfaces under humid conditions. It has a yellowing effect on the finish.
DUTY PUSH-ON DUTY GRIP RING
EXTERNAL
EXTERNAL
1500
page 16
E-RING EXTERNAL
1540
page 16
REINFORCED E-RING EXTERNAL
1800
page 17
C-RING EXTERNAL
WA/AAR
page 17 CRIMP RING
PLAIN WIRE RING
3200
page 25
XRC-XRO
page 26
BEARING SNAP ROUND SECTION
RING
EXTERNAL
XSC-XSO
page 27
SQUARE SECTION EXTERNAL
page 28
SPIRAL RINGS
TRC
page 28
RECTANGULAR SECTION
temperatures for rings: 1000°F
1501, 1540, 1800 all sizes
(850°F under severe stress).
Other series & sizes on application
H SS2 SS2
Beryllium Copper*
Alloy 25
DIN 472 471
6799 M1465
ROTOR CLIP HO SH HOI SHI SHR SHM RE E C LC PO POL BE BHO BSH VHO VSH SHF TX TY
not offered not offered
TI
MILITARY STANDARD MS16625** MS16624** MS16627** MS16626** MS 3217**
Finish
Suitability
Interchangeability Code
Anderton Truarc IRR Rotor Clip
Phosphate
Zinc-based coating sealed with lanolin-based oil.
Provides added shelf-life plus a measure of
EXTERNAL
EN page 29
EXTERNAL NOTCHED RINGS
XAN pages 30 - 31
EXTERNAL RETAINING
RINGS
pages 32 - 33
EXTERNAL RETAINING
RINGS
NAN pages 34 - 35
INTERNAL RETAINING
— MS 3215** MS16633** MS16632** MS90708**
— — MS16634** MS16629** MS16628** MS16631** MS16630** MS90707** — — — — —
ROTOR CLIP DHO DSH DE DTX
SEEGER J A RA ZA
S
S
ST
ST
Stainless Steel*
PH 15-7 Mo (Armco)
N1300 sizes 25 thru 150
Precipitation hardened.
1308 sizes 75 thru 150
Withstands all dilute non-acidic
1400 sizes 25 thru 200
chemicals. The most effective
1408 sizes 50 thru 200
AS
material for long term resistance 1440 all sizes
to industrial atmospheres.
1460 sizes 39 thru 66
Maximum recommended operating 1500 all sizes except 4
BC
marine applications.
1440 all sizes
Maximum recommended operating 1460 sizes 39 thru 66
temperatures for rings: 660°F for 1500, 1501, 1540, 1800 all sizes
limited period of time.
Other series & sizes on application
C
BC
BC
*Not all sizes in Stainless Steel and Beryllium Copper in stock — inquire for availability.
ZD
made by its contact with the steel. Superior to
Cadmium in general industrial use and considerably
less expensive. Should not be used in conjunction
with alkaline solutions, hot water or steam. Though
protection in corrosive environments. Used as the
PP
standard finish for several PP series of rings.
Coating weight iPP PA
PA
Bright Zinc*
RINGS
pages 38 - 39
INTERNAL RETAINING RINGS
(METRIC)
ND page 40
INTERNAL RETAINING
RINGS
pages 44 - 45
SPRINGS/ MISC
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service
N1300 sizes 25 thru 150
Precipitation hardened.
1308 sizes 75 thru 150
Poor resistance to industrial
1400 sizes 12 thru 200
atmospheres but widely used in
1408 sizes 50 thru 200
eg:MS 16625 -1025=1300-25 CD (Carbon Steel, Cadmium Dichromate) (We no longer supply) 2025=1300-25 ZD (Carbon Steel, Zinc Dichromate) 3025=1300-25 PP (Carbon Steel, Standard Phosphate) 4025=1300-25 AS (Stainless Steel, Passivate) 5025=1300-25 C (Beryllium Copper)
INTERNAL
ARCON
AR ON 2
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service
Wire / Specialty Rings - CONTENTS
1000
page 24
ROUND SECTION
1200
page 24
ARCON
ARCON RING AND SPECIALTY CORPORATION Over Thirty Years of Service