速通门维护手册

合集下载

速通门维护服务方案

速通门维护服务方案速通门维护服务方案一、概述速通门是一种现代化的智能门禁系统，广泛应用于各个领域，包括住宅小区、商业办公楼、学校等，确保了人员出入的安全与便捷。

为了保障速通门的正常运行和延长使用寿命，定期的维护是必不可少的。

本文将介绍速通门维护的服务方案。

二、维护内容1. 机械部分：主要包括门体、电机、门轨等机械设备的检查和维护。

通过对门体进行外观检查，确保门体的完整和正常运行。

对电机和门轨进行润滑，保证门体开闭的灵活顺畅。

2. 电气部分：主要包括控制箱、传感器、开关等电气设备的检查和维护。

通过对控制箱进行检查，确保主控程序正常运行。

对传感器和开关进行清洁和校正，保证其灵敏度和准确性。

3. 安全部分：主要包括红外线感应器、闸臂等安全设备的检查和维护。

通过对红外线感应器进行检查，确保其正常工作。

对闸臂进行清洁和校正，保证其运动稳定和安全性。

4. 系统部分：主要包括管理软件的检查和维护。

通过对管理软件进行检查，确保其正常运行和更新。

对系统进行备份和恢复，保证数据的安全性和可靠性。

三、维护周期速通门的维护周期可以根据实际情况进行调整，大体上建议每半年进行一次大维护，每月进行一次小维护。

大维护主要包括对机械、电气、安全和系统进行全面检查和维护，小维护主要包括对一些常见故障的解决和修补。

四、维护流程1. 建立维护计划：根据速通门的使用情况和维护周期，制定详细的维护计划，包括维护时间、维护内容和维护人员等。

2. 维护前准备：维护人员需要准备必要的工具和设备，确保维护的顺利进行。

同时，需要通知相关人员提前做好准备工作，比如通知住户关好门窗等。

3. 维护过程：按照维护计划，对速通门的各个部分进行检查和维护。

遇到问题及时解决，对需要更换的部件及时购买和更换。

4. 维护记录：将维护过程中的发现和处理情况记录下来，包括维护日期、问题描述和解决方法等。

方便以后的维护和跟踪。

5. 维护结果评估：维护结束后，对维护结果进行评估，确保目标达到预期。

opengate 维修手册

opengate 维修手册【原创实用版】目录1.OpenGate 维修手册概述2.手册的主要内容3.使用手册的注意事项4.结论正文【OpenGate 维修手册概述】OpenGate 维修手册是一本专业的维修指南，旨在帮助技术人员和工程师对 OpenGate 产品进行故障排除和维修。

本手册包含了详细的操作步骤和技巧，以确保维修过程的安全和高效。

【手册的主要内容】手册的主要内容包括以下几个部分：1.设备概述：介绍 OpenGate 产品的基本信息，包括设备型号、主要性能参数和应用场景。

2.故障排除流程：指导技术人员如何快速定位故障原因，并提供相应的解决措施。

3.维修步骤：详细介绍设备维修的具体操作流程，包括拆卸、检查、更换零部件等步骤。

4.维修技巧：提供一些实用的维修技巧和注意事项，以提高维修效率和安全性。

5.故障代码及解析：列举常见的故障代码，并给出相应的解析和处理方法。

6.零部件清单：提供 OpenGate 设备的零部件清单，包括零部件名称、型号和规格等信息。

【使用手册的注意事项】在使用本手册时，请注意以下几点：1.在进行维修操作前，请确保设备已经断电，并采取必要的安全防护措施。

2.在拆卸设备时，请按照手册中的顺序和步骤进行，避免对设备造成不必要的损坏。

3.在更换零部件时，请确保选用与设备型号和规格相匹配的零部件，否则可能导致设备故障或安全隐患。

4.在维修完成后，请按照手册要求进行组装和测试，确保设备正常运行。

5.如遇到手册中未列举的故障或问题，请及时联系厂商或专业技术人员进行处理。

【结论】总的来说，OpenGate 维修手册是一本实用的维修指南，它为技术人员提供了详细的维修操作步骤和技巧。

阿肯锐 butterfly 阀门操作与维护手册说明书

Butterfly V alvesContents(1) Be sure to read the following description of ourproduct warranty 1(2) General Operating Instructions2(3) General Instructions for Transportation,Unpacking and Storage3(4) Names of Parts4(5) Comparison between W orking Temperature and Pressure6(6) Installation Procedure7(7) Operating Procedure12(8) Disassembly and Assembly Procedurefor Parts Replacement14(9) Installation Procedure for Handle16(10) Adjustment Procedure forStopper on Gear Type17(11) Inspection Items 18(12) Troubleshooting18(13) Handling of Residual and W aste Materials19User ’s ManualASAHI AV VALVEST ype 57: 40 mm (1 1/2”) - 350 mm (14”) Body: PVC, PP , PVDFT ype 56: 400 mm (16”) Body: PP , PVDFT ype 56D: 400 mm (16”)Body: PDCPDThis User’s Guide contains information important to the proper installation, maintenance and safe use of the ASAHI A V product store in an easily accessible location.WarningCaution-Always observe the specifications of and the precautions and instructions on using our product.-W e always strive to improve product quality and reliability, but cannot guarantee perfection.Therefore, should you intend to use this product with any equipment or machinery that may pose the risk of serious or even fatal injury, or property damage, ensure an appropriate safety design or take other measures with sufficient consideration given to possible problems. W e shall assume no responsibility for any inconvenience stemming from any action on your part without our written consent in the form of specifications or other documented approval.-The related technica l d ocuments,operation manuals,and other documentation prescribe precautions on selecting, constructing, installing, operating, maintaining, and servicing our products. For details, consult with our nearest distributor or agent.-Our product warranty extends for one and a half years after the product is shipped from our factoryor one year after the product is installed, whichever comes first. Any product abnormality that occurs during the warranty period or which is reported to us will be investigated immediately to identify its cause. Should our product be deemed defective, we shall assume the responsibility to repair or replace it free of charge.-Any repair or replacement needed after the warranty period ends shall be charged to the customer.-The warranty does not cover the following cases:(1) Using our product under any condition not covered by our defined scope of warranty.(2) Failure to observe our defined precautions or instructions regarding the construction,installation, handling, maintenance, or servicing of our product.(3) Any inconvenience caused by any product other than ours.(4) Remodeling or otherwise modifying our product by anyone other than us.(5) Using any part of our product for anything other than the intended use of the product.(6) Any abnormality that occurs due to a natural disaster, accident, or other incident not stemming from somethinginside our product.(2) General Operating Instructions- Using a positive-pressure gas with our plastic piping may pose a dangerous condition due to the repellent force particular to compressed gases, even when the gas is under the same pressure as water. Therefore, be sure to take the necessary safety precautions such as covering the piping with protective material. For inquiries, please contact us. For conducting a leak test on newly installed piping, be sure to check for leaks under water pressure. If absolutely necessary to use gas in testing, please consult your nearest service station beforehand.- Do not step on the valve or apply excessive weight on valve. (It can be damaged.)- Keep the valve away from excessive heat or fire. (It can be damaged, or destroyed.)- Operate the valve within the pressure Vs temperature range. (The valve can be damaged by operating beyond the allowable range. - Allow sufficient space for maintenance and inspection.- Select a valve material that is compatible with the media, refer to “CHEMICAL RESIST ANCE ON ASAHI A V V AL VE”.（Some chemicals may damage incompatible valve materials.） - Do not use the valve on condition that fluid has crystallized. (The valve will not operate properly.)- Keep the valve away from places of direct sunlight, water and dust. Use cover to shield the valve. (The valve will not operate properly.) - Perform periodic maintenance.(Leakage may develop due to temperature changes or changes with time during prolonged storage, rest, or operation.)- Gear Operator Operation; we utilize a self-locking worm gear design on our manual operators. This design allows flow control of the valve in intermediate positions in normal process conditions. In applications where very high velocity , turbulence flow or vibration is present and an intermediate setting is required, It is recommended to install a locking device. The locking device will prevent the possibility of the valve drifting in severe condition from it is original intermediate setting.Handle lockWarningCaution(3) General Instructions for Transportation, Unpacking and Storage-In suspending and supporting a valve, take enough care and do not stand under a suspended valve.-The valve is not designed to handle any kind of impact. A void throwing or dropping the valve.-A void scratching the valve with any sharp object.-Do not pile up corrugated cardboard packages one on top of another too much. Excessively piled-uppackages may collapse.-A void contact with any coal tar creosote, insecticides, vermicides or paint.（The force of swelling may damage the valve.）-When transporting a valve, do not carry it by the handle.-Store valves in the original corrugated cardboard boxes, avoid direct sunlight, and store it indoors (atRoom Temperature). Also avoid storing it in a place which may become very hot.(Corrugated cardboard packages become weaker as they become wet with water or other liquid.Take enough care in storage and handling.)-After unpacking the products, check that they are defect-free and meet the specifications.WarningCautionType56 (Gear Type): 400mm (16”)Body material: PP, PVDF, PDCPD** Reference figure(5) Comparison between working temperature and pressure[70][150]W o r k i n g p r e s s u r e (M P a ) [P S I ][70][150]W o r k i n g p r e s s u r e (M P a ) [P S I ][70][150]W o r k i n g p r e s s u r e (M P a ) [P S I ]BUTTERFLY VALVE TYPE57[70][150]W o r k i n g p r e s s u r e (M P a ) [P S I ][70][150]W o r k i n g p r e s s u r e (M P a ) [P S I ]BUTTERFLY VALVE TYPE57(6) Installation Procedure- In suspending and supporting a valve, take enough care and do not stand under a suspended valve.- Be sure to conduct a safety check on the machine tools and motor-driven tools to be used, beforebeginning work. - W ear protective gloves and safety goggles as fluid remains in the valve. (Y ou may be injured.)-When installing a pipe support by means of a U-band or something similar, take care not to overtighten. (Excessive tension may damage it.)- When installing pipes and valves, ensure that they are not subjected to tension, compression, bending, impact, or other excessive stress. - Use flat faced flanges for connection to A V V alves.- Ensure that the mating flanges are of the same standards.- When installing the piping, do not do so with the valves fully closed.(The disc may pinch into the seat, resulting in a high operating torque, thus disabling opening and closing.) - The gasket is unnecessary.(The seat carries out the role of the gasket.)WarningCautionCautionCautionProcedure -The parallelism and axial misalignment of the flange surface should be under the values shown in the following table The parallelism and axial misalignment of the flange surface should be under the values shown in theA failure to observe them can cause destruction due to stress application to the pipe ）3) Tighten the bolts and nuts gradually with torque wrench to the specified torque in a diagonal manner. (Fig. 6-3)- Tighten the bolts and nuts gradually with a torque wrench to thespecified torque level in a diagonal manner.Fig. 6-3The disk [2] is prevented from overflowing. (The disk [2] is damaged.)CautionCautionCautionCaution : A void excessive tightening. (The valve can be damaged.)<ANSI Standard>Body Material: PVC, PP, PVDF<ANSI Standard>Body Material: PDCPDNote:Longer bolts may be required for stub-end and back-up ring arrangements. Always double check your mating flange thickness before assuming any bolt lengths.(7) Operating Procedure-Do not use the valve to fluid containing slurry.(The valve will not operate properly.)-The installed valve must never be opened or closed when foreign matter such as sand is present in thepipeline.-Do not exert excessive force in closing the valve.-When operating the handle, be sure to do so with your hand. (Using a tool may damage the handle.)1)Open and close the valve by turning handle smoothly.（Turn clockwise to close and counterclockwise to open.）2)In case of lever type (40-200 mm{1 1/2”-8”}), the direction of handle is same a s the disc as shown in Fig. 6-1.-The adjustments for full-opened and full-shut position are set using the stopper adjuster.Fig. 7 – 2CautionCautionTechnical Data for OperationNote : Data mentioned in the table above is reference only.These data are measured in standard condition and it slightly differs depending on conditions.(8) Disassembly and Assembly Procedure for Parts Replacement- The handle part can be removed with line pressure present. The stem retainer can't be removed with linepressure present. If stem retainer needs to be removed, there can not be line pressure present.- W ear protective gloves and safety goggles as fluid remains in the valve.(Y ou may be injured.)- When installing pipes and valves, ensure that they are not subjected to tension, compression, bending,impact, or other excessive stress.- Do not change or replace valve parts under line pressure.Gear Type <Nominal size 40mm-400mm (1 1/2”-16”)5) Loosen set bolt [28] for gear box [25] and pull off the gear box upward with gasket [158]*. (*Nominal Size: 400mm is gasket [25])6) <Nominal size 40mm-350mm (1 1/2”-14”) *It advances 400mm (16”) as follows.>To take off stem holder [8]. Release 4 tapping screws [157] by using screw driver (+).WarningCautionLever & Gear Type7)Hold flat surface of Stem [7] with vise and pull off valve body[1].8)(A) Set the valve body [1] on square lumbers at edges of valve body on the press and put a lumber on the disc[2].Operate the press slowly and push disc [2] and seat [3] out if the valve body[1].(B) Set the valve body [1] on square lumbers at edges of valve body and put a circular stick on the disc[2].Strike the circular stick with a hammer and remove disc [2] and seat [3] out of the valve body[1].9)Set the disc [2] parallel to the working desk to half opened position. Push the seat[3], and remove the disc[2].10)<Nominal size 40mm-350mm (1 1/2”-14”) *It advances 400mm (16”) as follows.>Remove the stabilization ring [156] and the O-ring(C) [6]from the stem[7].<< Assembly >>Procedure1)Put the O-ring(C) [6]onto the stem[7].2)Before starting assembly, grease (Silicone) should be spread on the top and bottom disc[2], the stem hole of theseat [3] and the stem O-ring(C)[6].3)<Nominal size: 40mm-350mm(1 1/2”-14”) *It advances 400mm (16”) as follows.>Insert the stabilization ring [156] into the upper side slot of the seat [3]. The upper side slot of seat [3] has largerstem hole than lower side.Make certain tabs are properly aligned. Both upper and lower stabilization ring [156] are identical.4)Insert the stem [7] about 1/3 into the body [1]. Install the seat [3] into the body [1] by aligning upper seat stem holewith the stem [7].5)Collapse the left or right side of seat [3] in towards opposing side exposing lower stem hole by screw driver (–).<Nominal size: 40mm-350mm (1 1/2”-14”) *It advances 400mm (16”) as follows.>Install the stabilization ring [156]into the body [1] aligning tabs of ring with center groove of the body [1]. Seat[3]tabs should line up when bottom of seat is reset into body of valve.6)Remove the stem [7].7)Reset the seat [3] into the body [1].<Nominal size: 40mm-350mm(1 1/28)To install disc [2], make certain valve size on disc [2] is in upright direction. Install top of disc [2] into seat [3]aligningwith upper stem hole.9)Rotate disc [2] to 75% (Approx.) closed position and install stem [7] about 50% into the body [1].10)Press in bottom of disc [2] to lower stem hole.Look into valve body [1] to be certain full square in disc [2] is centered with upper valve [1] stem hole. If not, repeat 11) Install the stem [7] into valve body [1] and disc [2]. If disc [2] is properly aligned, stem [7] should slide in smoothly .If stem [7] does not slide in smoothly , report from step 8) to properly align the disc [2] in the valve body [1]. 12) <Nominal size: 40mm-350mm(1 1/2”-14”) *It advances 400mm (16”) as follows.>Install stem holder [8] onto valve body [1] with countersunk holes facing up using 4 screws [157]. 13) To install lever or gear operator reverse disassembly procedure #5).14) After assembly , make sure that the valve can be fully opened and closed smoothly.(9) Installation procedure for handle《Installation 》Procedure1) with the indication line at the top o ｆ stem. 2) Secure the handle at the top of stem with the attached bolts washer, using socket wrench.3)handle, and install the cap by striking lightly by using a hammer.Do not use excessive force in installing or removing the cap. Caution《Remove 》 Procedure1)（–）. 2) handle.- Do not use excessive force, in installing or removing the cap.（It can be damaged ）(10) Adjustment Procedure for Stopper Gear TypeThe adjustments for full-opened and full-shut position are set using the stopper adjuster. Adjustment for Full-shut (Full-opened) position1) Remove the rubber cap of Full-closing (Full-opening)adjuster.2) Loosen the first stopper hex-bolt completely by allen wrench.3) Adjust the disc of valve to required position. 4) Tighten the stopper hex-bolts until it just stops.5) Put the rubber cap of Full-closing (Full-opening) adjuster back on gearbox by hand.Adjuster for Full-Shut PositionAdjuster for Full-Opened PositionRubber CapCaution(11) Inspection Items- Perform periodic maintenance.(Leakage may develop due to temperature changes or changes with time during prolonged storage, rest, or operation.)Inspect the following items.(12) TroubleshootingCaution(13) Handling of Residual and Waste Materials- Make sure to consult a waste treatment dealer to dispose of the valves.(Poisonous gas is generated when the valve is burned improperly.)Butterfly V alves40mm-350mm(1 1/2”-16”) Type 57400mm(18”) : Type 56Information in this manual is subject to change without notice.2009.8ASAHI AV VALVESCaution。

商场自动门维护安全操作手册

商场自动门维护安全操作手册一、前言商场自动门为顾客提供了便捷的通行体验，但为了确保其安全可靠运行，定期的维护至关重要。

本操作手册旨在为维护人员提供详细、清晰的指导，以保障商场自动门的正常运行和顾客的安全。

二、自动门类型及工作原理商场常见的自动门主要有平移式自动门和旋转式自动门。

平移式自动门通过传感器检测到人员接近时，控制系统驱动电机带动门体沿轨道平移开启，人员通过后再自动关闭。

旋转式自动门则是通过电机驱动门体围绕中心轴旋转，实现人员的进出。

三、维护前的准备工作1、维护人员应具备相关的电气知识和机械维修技能，熟悉自动门的结构和工作原理。

2、准备好必要的工具，如扳手、螺丝刀、万用表、清洁剂等。

3、在维护前，应设置明显的警示标识，防止他人误操作自动门。

四、安全注意事项1、维护时必须切断自动门的电源，以防止触电事故。

2、在进行机械部件维修时，要确保门体处于稳定状态，防止意外移动造成伤害。

3、高空作业时，必须佩戴安全带和安全帽。

五、日常维护内容1、外观检查每天对自动门的外观进行检查，查看门体表面是否有划伤、变形、腐蚀等情况。

如有问题，及时进行修复或更换部件。

2、传感器清洁定期清洁传感器表面的灰尘和杂物，以确保其正常感应。

使用干净的软布轻轻擦拭，避免使用湿布或腐蚀性清洁剂。

3、轨道清洁与润滑清理轨道内的杂物和灰尘，检查轨道是否平整，有无变形。

然后涂抹适量的润滑油，以减少门体运行的阻力。

4、皮带和链条检查检查皮带和链条的松紧度，如有松弛，及时调整。

同时查看是否有磨损、裂纹等情况，必要时进行更换。

5、电气连接检查定期检查电气连接是否牢固，有无松动、氧化等现象。

如有问题，及时紧固或更换连接件。

六、定期维护内容1、电机检查每半年对电机进行一次检查，包括电机的运行声音、温度、电流等参数。

检查电机的电刷磨损情况，必要时进行更换。

2、控制系统检测每年对控制系统进行一次全面检测，检查控制板上的电子元件是否正常，程序是否运行稳定。

速通门使用说明书

速通门使用说明书Operating InstructionsEG 系列产品EG series products2015.04目录1.产品 (4)1.1关于文件 (4)1.2产品描述 (4)1.3符合的规范法规 (4)1.4产品标识与标志 (5)1.5 外观 (5)2.性能与功能 (7)3.安装指导说明 (8)3.1包装和存储 (8)3.2设备运输 (8)3.3布线与安装基础 (9)3.4读卡器或其他识别装置的安装 (10)3.5 初次上电启动 (11)3.6 调试 (12)3.6.1调试一般过程 (12)3.6.2 功能测试 (12)4.日常使用操作 (12)4.1刷卡进出 (12)4.1.1防尾随 (14)4.2连续进出 (14)4.3紧急放行 (15)4.4禁行 (16)4.5结果指示灯颜色说明 (16)4.6 反馈信号 (17)5.常见故障与简单保养维修 (17)5.1故障与维修列表 (17)5.2简单保养 (17)6.附录 (19)6.1常用接线图 (19)7 回收处置 (20)7.1 包装处理 (20)7.2 废旧设备的处理 (20)ENGLISH VERSION (21)1.About this document (22)1.1 Content and purpose (22)1.2 PURPOSE FOR USE (22)1.3 Directives and guidelines (23)1.4 Product labeling (24)1.5 Construction (24)2. Technical data (25)3. Installation (26)3.1 Packaging and storage (26)3.2 Moving (26)3.3 Cabling and electrical installation (26)3.4 Installation of card readers or other identify devices (28)3.5 Behavior first set-up power on (29)3.6 Commissioning (30)3.6.1 Commissioning sequence (30)3.6.2 Function test (30)4.Operation for use (30)4.1 swiping card entry/exit (30)4.1.1 Anti-trail (32)4.2 Permanent entry/exit (32)4.3 Emergency release (33)4.4 Block (34)4.5 The color of the access signal light (34)4.6 The feedback signal (35)5. Error checklist and maintenance plan (36)5.1 Error checklist (36)5.2 Maintenance plan (36)6.The appendix (37)6.1 connection diagram (37)7 Disposal (38)7.1 Disposal of the packaging (38)7.2 Disposal of old unit (38)1.产品1.1关于文件本文件用于速通门EG系列产品的操作和使用。

门禁系统维护手册(完成版7月26日)

Operation and Maintenance Manual(Access Control System)维护操作手册（门禁系统）Project Name: Andreas Stihl Powertools(QingDao) New Plant 项目名称: 安德烈斯蒂尔动力工具（青岛）有限公司新建厂房Construction Company: Shanghai Changjiang Züblin JV施工单位：上海长江旭普林建筑工程有限公司Submitted by:编制单位：Date:日期：Table of Contents目录1.0 General Description of Project工程概况2.0 General Description of Systemt系统描述3.0 Notices during Installation安装时注意事项4.0 Operational and Maintenace Specifications操作＆维护说明5.0 Trouble Shooting常见问题及解决办法6.0 Liaison Method厂家联系方式Maintenance Manual维护手册1. General Description of Project工程概况：Project name ：Andreas Stihl Powertools (Qingdao) Co., Ltd. New Production Project项目名称: 安德烈斯蒂尔动力工具青岛有限公司新建厂房项目Employer：Andreas stihl Powertools (Qingdao) Co., Ltd.业主：安德烈斯蒂尔动力工具（青岛）有限公司General contractor：Changjiang zublin JV总包方：上海长江旭普林建筑工程有限公司Subcontractor: The Fourth Construction Co., Ltd. of China Electronics System Engineering 专业承包公司：中国电子系统工程第四建设有限公司Scope of Contract: Access control System承包内容：门禁系统。

阀门维修手册最终版-第二章

其次章阀门安装、运行管理及大修手册阀门的维护与管理包括提货搬运、库存保管和安装使用的全过程，它是阀门正常运转的一项重要的保证措施。

第一节阀门运输途中的维护阀门的手轮破损、阀杆弯曲、支架断裂、法兰密封面的磕碰损坏，特殊是灰铸铁阀门的损坏，相当一部分消灭在阀门运输过程中。

造成上述损坏的缘由，主要是运输人员对阀门的基本常识不甚了解和野蛮装卸作业造成的。

运输阀门之前，应当预备好绳索、起吊设备和运输工具等。

检查阀门包装，包装损坏的应当修订好，不能怕麻烦，不能存有侥幸心理；包装要符合标准要求，不允许任凭旋转已包装封存阀门的手轮；阀门应当处于全闭状态，对已误开启的阀门，应当将密封面擦洁净后再关闭紧，封闭进出口通道。

传动装置应当与阀门分别包装运输。

阀门装运起吊时，绳索应当系在法兰处或支架上，切忌系在手轮或阀杆上。

阀门吊装要轻起轻放，不要撞击他物，放置要平稳。

放置姿势应当直立或斜立，阀杆向上。

对放置不稳妥的阀门，应用绳索捆牢，或用垫块固定牢，以免在运输中相互碰撞。

手工装卸阀门时，不允许把阀门从车上往下扔，也不允许从地上向车上抛；搬运过程中应当有条不紊，顺次排列，严禁堆放。

阀门运输中，要疼惜油漆、铭牌和法兰密封面；不允许在地面上拖拉阀门，更不允许将阀门进出口密封面落地移动。

在施工现场暂担忧装的阀门，不要拆开包装，应当放置在平安的地方，并作好防雨、防尘工作。

其次节阀门保管中的维护阀门运输进入仓库后，保管员应当准时办理入库手续，这样有利于阀门的检查和保管。

保管员应当认真核对阀门的型号规格，检查阀门外观质量，并帮忙检验人员对阀门进行入库前的强度试验和密封性试验。

符合验收标准的阀门，可办理入库手续；对不合格的也应妥当保管，待有关部门处理。

对入库的阀门，要认真擦拭、清洗阀门在运输过程中的积水和灰尘脏物；对简洁生锈的加工面、阀杆、密封面应当涂上一层防锈剂或贴上一层防锈纸加以爱护；对阀门进出口通道要用塑料盖或蜡纸加以封闭，以免脏物进入。

安全门窗维修与紧急处理手册

安全门窗维修与紧急处理手册概述安全门窗是保护家庭和办公场所安全的重要组成部分。

然而，长时间使用和外部环境的影响可能导致门窗出现故障或破损。

本手册提供了安全门窗维修和紧急处理的指南，帮助用户在遇到问题时能够快速、安全地解决。

1. 常见安全门窗问题及解决方法1.1 门窗无法正常打开或关闭•问题描述：门窗无法打开或关闭，感觉被卡住或受阻。

•解决方法：首先检查门窗周围是否有物体阻挡，清除阻挡物。

如果问题仍然存在，可能是由于门窗的机械部件损坏。

建议联系专业维修人员进行检修。

1.2 门窗孔洞或破损•问题描述：门窗出现孔洞或破损，可能导致安全隐患。

•解决方法：对于小孔洞，可以使用透明胶布进行临时修补。

如果是较大的破损，建议立即联系专业维修人员进行处理，以确保门窗的安全和正常使用。

1.3 门窗玻璃破碎•问题描述：门窗玻璃破碎，可能导致安全风险和环境干扰。

•解决方法：首先小心处理破碎的玻璃，避免伤害自己。

然后清理玻璃碎片，使用胶带将破碎的区域进行封闭，以防止进一步的伤害。

最后，联系专业维修人员进行玻璃更换。

2. 突发安全问题处理指南2.1 火灾紧急情况•处理方法：如果发生火灾，立即用湿毛巾遮住口鼻，低姿势尽快逃生。

关闭门窗，切勿乱扔物品阻碍通道。

用湿毛巾或水湿透床单等可燃物品封堵门下缝隙，避免烟气进入。

及时拨打火警电话，等待救援。

2.2 地震紧急情况•处理方法：地震时迅速躲避到坚固的门框下或者坚实的家具旁边，避免靠近门窗等易破裂物。

保持冷静，防止惊慌，等待地震结束。

地震结束后，及时检查门窗是否存在破损，如果有必要，及时联系维修人员。

2.3 强盗闯入紧急情况•处理方法：在发现强盗闯入时，首先确保自己的安全。

如果条件允许，大声呼救，向邻居发出警报。

切勿与强盗对峙，尽量保持冷静，不要做出激烈反抗的行为。

根据情况，合理判断是否逃离或选择隐藏。

紧急情况过后，联系警方并在安全的地方等待他们的到来。

3. 维护安全门窗的常规方法3.1 定期清洁门窗•方法：使用温和的洗涤剂和软布清洁门窗表面，避免使用硬质刷等会刮伤表面的工具。

无刷圆弧速通门多奥产品安装布线施工说明书(1400长2019版)

无刷圆弧速通门多奥产品安装布线施工说明书(1400长2019版）无刷速通门使用说明书前言尊敬的用户：非常感谢您选购多奥的通道系列产品。

它拥有传统管理模式无法比拟的优势。

无论是对通过通道的人员权限控制，还是对通行人员实行收费、考勤、计数等，在传统管理模式下去实现，将会花大量的人力、物力、财力，且工作量大、成效低；而解决此类问题是智能通道管理产品的强项。

他是社会文明高度发展的科技结晶，为科学管理通道开辟了新纪元。

本设备对外采用标准的电气接口，可方便的与磁卡、条码卡、ID卡和IC卡等多形式读写设备进行系统集成。

本产品已系列化，有多种型号和规格供您选择。

产品外形采用不锈钢板冲压成型，造型美观大方，防锈、耐用；对外采用标准的电气接口，能方便地将多种读写器集成在本产品上；本产品还专门设计了满足消防要求的控制系统，以便在紧急情况下，使通道畅通，保证人员及时疏散。

该产品性能稳定，安全可靠，可广泛应用于车站、码头、会所等人流多，而又需要监控的场合。

本手册版权归多奥所有，未经书面许可，任何单位个人不得复制、使用本手册资料或其中的内容，违者要对造成的损失承担责任。

多奥保留对该产品进行改进、完善的权利，所以我们不能保证本手册与您购买的产品完全一致，但我们会定期对本手册进行审查并修订。

本手册如有任修订，恕不另行通知。

客户服务和技术支持承诺：用户自购买产品之日起，由多奥提供一年的免费保修和免费技术支持，并实行终身保修，超过免费保修期只收维护成本费。

但当用户对本产品有下列行为时，本承诺将自动终止。

1）用户自行改装、拆卸以及其他不能保证本产品软硬件完整性的操作时。

2）用户未按照本说明书的内容进行正确的使用而导致产品全部坏的。

！警告：1）本产品是技术性较强之设备，使用时系统若发生故障，应及时通知我公司2）售后服务部门或授权服务机构进行处理，切不可随意拆卸，以免损坏内部结构或操作不当而损害您的权益。

速通门工程安装指导书说明书

QEL系列速通门工程安装指导书资料版本：V4.6Revision Record 修订记录Date 日期RevisionVersion修订版本CR ID /Defect IDCR号Sec No.修改章节ChangeDescription修改描述VersionNumber版本号Author作者2018-4-17 1.00 初稿W53152018-6-28 1.01 新增四款速通门相关安装、布线内容W53152018-08-25 1.02 新增IC、ID卡读卡器安装与接线；刷新速通门开孔图，识别终端防水安装指导；修改FG6111、FG8121速通门接线图W53152018-10-23 1.03 刷新FG8221过桥线接线、速通门宽度说明、身份证接线、去除部分速通门款型W53152019-01-30 1.04删除速通门内网络搭建内容、防水安装中的转接环安装部分；删除7.1.4未正确安装防水圈造成的漏水问题；新增工程商款的防水安装方法新增速通门功能模块的安装方法H012812019-04-23 1.05 增加速通门底座安装方法H012812019-05-16 2.0 主要增加FG8223安装、接线Z063422019-06-25 2.1 增加紧急开门按钮安装方法H012812019-07-23 2.2 文档名称删除“书”；室外工程设计增加水泥平台高度说明；修改FG6221、FG8221、FG8222速通门尺寸图；修改FG8223速通门尺寸图及安装说明。

S048022019-07-31 2.3 FG8222的底部结构更新W83282019-09-04 2.4 调整关于IC卡读卡器接线描述，调整部分格式Y065482019-10-18 3.0优化遥控模块、消防模块及温控模块安装指导内容。

修改Y065481FG8223系统进线图2019-11-28 4.0 结构调整；增加二维码读卡器安装方法；修改身份证读卡器接线方法；增加通道开关接线方法；增加闸机地面找水平说明；增加机箱晃动说明；增加工程安全须知W62322020-03-30 4.1 修改“室外工程设计”设置安全岛相关内容；优化部分速通门配件内容；W83282020-05-28 4.2 更新新款遥控器W8151 2021-07-01 4.3 更新FG8801内容V10832 2021-07-02 4.4 更新FG8221内容V13356 2021-08-26 4.5 更新FG8501内容W088172021-12-06 4.6更新6221/8221/8801扳手照片、修改FG8501工程接线图、删除原B51款遥控器内容W088172目录前言 (1)1 概述 (1)2 工程勘察 (1)2.1人脸速通门建设点选定依据 (1)2.2速通门安装地面要求须知 (2)2.3人脸速通门通道数量计算依据 (2)2.4工勘资料 (3)3 工程安全须知 (3)4 工程准备 (3)4.1安装工具 (3)4.2设备摆放 (5)4.3安装环境 (5)4.3.1新装类 (5)4.3.2 改造类 (7)4.4线缆铺设要求 (9)4.5工程设计 (10)4.5.1室内工程设计 (10)4.5.2室外工程设计 (10)5安全施工条例 (11)6工程安装 (11)6.1速通门安装 (11)6.1.1 FG6221系列人脸翼式速通门 (11)6.1.2 FG8221系列人脸摆式速通门 (14)6.1.3 FG8222系列人脸摆式速通门 (17)6.1.4 FG8223系列人脸摆式速通门 (19)6.1.5 FG8501系列人脸摆式速通门 (23)6.1.6 FG8801系列人脸摆式速通门 (26)6.2防水塑料板安装 (28)6.3人脸核验终端安装 (29)6.3.1 ET-B32L人脸核验终端安装 (29)6.3.2 ET-SF1L人脸核验终端安装 (34)6.4读卡器安装 (36)26.4.1 IC卡读卡器安装 (36)6.4.2身份证读卡器安装 (36)6.4.3 二维码读卡器安装 (36)7工程接线 (36)7.1速通门电气部件接线 (36)7.1.1 FG6221接线 (37)7.1.2 FG8221接线 (43)7.1.3 FG8222接线 (47)7.1.4 FG8223接线 (51)7.1.5 FG8501接线 (54)7.1.6 FG8801接线 (58)7.2人脸核验终端接线 (61)7.2.1 ET-B32L/DET-532L人脸核验终端 (61)7.2.2 ET-S32L@W/QET-5301L@W人脸核验终端 (62)7.2.3 ET-SF1L人脸核验终端 (63)7.3读卡器接线 (65)7.3.1 IC卡读卡器接线 (65)7.3.2身份证读卡器接线 (66)7.3.3 二维码读卡器接线 (67)8附录 (68)8.1速通门消防按钮安装 (68)8.2 速通门通道开关安装 (69)8.3速通门温控模块安装 (72)8.3.1加热器技术参数 (72)8.3.2温控器技术参数 (72)8.3.3接线方式 (73)8.3.4安装 (73)8.4 速通门与消防模块接线说明 (74)8.4.1 消防模块工作原理 (74)8.4.2 速通门与消防模块接线说明 (74)8.5速通门底座安装 (74)8.5.1 FG8221底座安装 (74)8.5.2 FG6221底座安装 (76)8.5.3 FG8223底座安装 (77)8.5.4 FG8501底座安装 (79)8.5.5 FG8801底座安装 (81)38.6速通门标配标语粘贴 (82)8.7 速通门机箱晃动说明 (83)4前言本手册主要介绍人脸速通门的工程设计和安装，手册阅读对象为公司内部安装调试人脸速通门员工、集成商及工程商的实施人员和维护人员。

速通门的安装说明

A6安装说明1、产品结构及工作原理1.1、产品结构A6通道主体部分主要由机械系统和电控系统组成。

图1.1通道整体外观1、机箱；2、机芯；3、光幕传感器；4、门翼；5、读卡器；6、通道指示器；1.1.1、机械系统机械系统分为机箱和机芯两大部分，机箱作为载体其上安装有读写器、方向指示器、报警装置、光幕传感器、门锁等；机芯组成主要有伺服电机、机架、传动轴、闸门等。

1.1.2、电控系统电控系统主要组成：通道控制器、机芯控制板、红外光幕传感器、电源模块、报警器、方向指示灯、读卡器，各个部件的连接关系见下图：；；图1.2 通道电气系统框图其中主要部件的功用如下：a、通道控制器通道的控制中心，它接收读卡器和红外发射接收光幕的信号，对这些信号进行逻辑判断和处理后，再向通道指示灯、机芯控制器、报警装置发出执行命令；b、红外光幕传感器检测行人位置，起防尾随和安全保护作用；c、机芯控制器接收通道控制器发出的信号，控制电机运转，实现闸门开关；d、通道指示灯显示通道当前通行状态，引导行人安全有序地通过通道；e、报警灯和蜂鸣器向非法通行的人员发出声光报警提示信号；f、读卡器读取卡上信息并经过判断处理后，向通道控制器发出有效认证信号；显示旅客卡片认证处理结果；g、电源模块通道电气电子设备提供AC220V，DC24V，DC12V，DC5V电源。

2、产品安装2.1、产品安装2.1.1、地面铺设与整机固定准备安装设备的工具，清点配件，整理安装设备的地基基面，以中心线为基准，划两条条平行线，其间距为1220mm，再分别根据图2.1确定各边道的8个安装孔位；图2.1 通道安装孔位确定孔位，钻好孔，埋下地脚螺栓或膨胀螺栓；将底座分别搬到相应的安装位，先逐个对准地脚螺栓位预紧螺母；分别将强电电缆线和弱电电缆线区分开对照电缆线上的标签，参考接线图，将电源线、控制线与之相对应的接口接好，并用水泥埋到相应的位置；把各机箱对应到相应的位置用螺丝固定好；检查系统是否正确，检查无误后，再进行下步工作；打开相邻一台机箱门，将机座螺栓孔对准地脚螺栓并对齐已定的基准设备，紧螺母，若有多台需安装以此类推；2.1.2、电气部件连接A6通道电气零部件的位置见图2.2。

门禁系统维护与安全操作手册

门禁系统维护与安全操作手册1. 概述门禁系统是一种用于控制人员进出特定区域的安全设备。

本手册旨在提供门禁系统的维护和安全操作的指导，以确保系统的稳定运行和保障安全。

2. 系统维护2.1 定期检查设备运行状态1. 检查门禁主机是否正常运行，确认是否存在故障提示或警报。

2. 检查门禁读卡器的工作状态，确保读卡器正常响应。

3. 检查电源和网络连接是否正常，确保门禁系统能够正常工作。

4. 检查门禁系统的软件是否需要更新，及时升级系统以获取最新的安全补丁。

2.2 备份系统配置和数据1. 创建系统配置和数据的备份文件夹。

2. 定期将门禁系统的配置文件、数据库文件等重要数据复制到备份文件夹中。

3. 对备份文件夹进行定期检查，确保备份文件的完整性和可用性。

2.3 定期维护硬件设备1. 清洁读卡器和键盘等设备表面，防止灰尘积累影响正常使用。

2. 检查设备的连接线是否松动或损坏，及时更换或修复。

3. 定期检查门禁设备的电源供应，确保电源线的连接牢固，电压稳定。

3. 安全操作3.1 授权管理1. 仅授权具有合法身份和必要权限的人员进入特定区域。

2. 定期审查授权名单，及时删除无权限人员的授权。

3. 禁止私自携带他人卡片或借用他人卡片进入特定区域。

3.2 密码设置和管理1. 设置复杂的密码，并定期更换密码。

2. 不要使用与个人信息相关的密码，避免被猜测。

3. 不要将密码与他人共享，确保密码的保密性。

4. 在怀疑密码泄露时，及时更改密码。

3.3 安全漏洞修复1. 定期检查门禁系统的安全漏洞，及时获取并安装安全补丁。

2. 关注门禁系统供应商的公告和更新信息，了解系统的最新安全漏洞。

3. 定期进行漏洞扫描和安全评估，找出潜在的安全威胁并及时修复。

4. 紧急处理1. 如果发现安全漏洞或异常行为，立即向安全人员报告。

2. 在紧急情况下，使用紧急开关或报警按钮启动门禁系统的紧急模式。

3. 在系统出现故障时，立即与系统供应商或维护人员联系，并记录故障信息。

速通门产品参数功能特点及开发说明

速通门产品参数功能特点及开发说明产品参数◇机箱材质：SUS 304不锈钢◇材料厚度：标配1.2mm-2.00mm(可选配）◇通道宽：600-750mm◇工作电源：AC220 ±10% V/50 ±10% HZ◇驱动电机：直流有刷DC24V 电机◇工作环境：室内、室外(阴棚）◇工作温度：温度：-20℃ ～60℃ 相对湿度：≤90%，不凝露◇闸门开、关时间： 0.2秒◇通行方向：单向或双向通行◇通行速度：50人/分钟◇正常使用寿命：500 W次◇通讯接口：标准232/485 TCP/TP接口，距离≤1200米◇输入接口：干接点信号或+12V电平信号或脉宽≥100ms的DC12V脉冲信号，驱动电流≥10mA；功能特点◇多奥机电一体化结构设计，机芯可360度旋转，数字控制分辨精度达0.0878°，运行平稳、噪音小；◇逆回处理、防夹人、自由通行设置、单人或多人通行、马达堵转保护、出通道延时等；◇开、关闸速度可达0.2秒/动作；◇停电后离合器无吸合，摆臂可手动推开；实现断电开闸功能，符合消防需求；◇人性化的状态指示功能，标明通道状态与通行指示；提高通行效率同时也方便维护；◇非法闯入、尾随通行、逆向通行报警等提示功能，可有效规范通行秩序和方便管理；◇故障自检及报警提示功能，方便用户的维护使用；◇多种通行组合模式，设备可常开或常闭、根据现场管理需要随时配置控制模式；◇开、关闸速度调节，具备故障自检、提示功能，管理和维护更加便捷；◇统一、标准的对外电气接口，可与门禁设备配合使用；可通过计算机实现远程控制与管理。

功能开发◇主板内置按键，可编辑设备的工作状态，工作模式，主板计数等功能◇二次开发，可实现联网售票，二维码开闸，区间消费，人脸识别，人证合一，考勤抓拍，手机摇一摇开闸等功能。

(AN)速通门方案

目录一、系统概述： (3)二、产品选型 (3)三、系统功能 (4)1、安全检测功能 (4)（1）、起始感应探测区 (5)（2）、通道追踪探测区 (5)（3）、安全防夹检测区 (5)（4）、低位安全探测区 (5)2、材质、坚固性及外观设计 (6)(1）、材质 (6)（2）、坚固性 (6)（3）、外观设计 (6)3、工作原理 (6)（1）、授权通行 (6)（2)、多授权通行 (7)（3）、未授权人员通行 (7)（4）、双方向授权人员进入通行 (7)（5）、反方向未被授权者进入通行 (8)4、安全防范功能 (8)（1）、防潜伏、防跨越、防强行闯入 (8)（2）、防跟随、防尾随 (8)（3）、高低安防等级切换（不同工作状态切换） (9)5、安全保护功能 (9)（1）、状态指示灯 (9)（2）、断电处理 (9)（3）、紧急疏散 (9)（4）、防门翼夹人 (10)（5）、关门延时 (10)6、日常使用 (10)7、AN210特点与优势 (10)（1）、精准的多级探测技术 (11)（2）、专属的安全驱动系统 (11)（3）、现代时尚的造型设计 (11)（4）、清晰的通道状态显示 (11)（5）、个性化定制服务 (12)8、访客管理系统 (12)9、卡回收装置 (15)四、主要设备技术参数： (16)一、系统概述：设置双翼双向摆动式人员通道闸，用于管控进出人员，建立良好的秩序；通道闸采用双向进出方式，使用刷卡方式通行，通道闸可设置为“单进”、“单出”、“双向通行”三种通行方向和自由通行、刷卡通行和禁止通行三种模式。

中心管理系统及通道闸附近的控制点可以设定通道闸状态为常开或常闭。

正常工作方式下，通道闸处于常闭状态，无人员通过时，闸门一直闭合；通道闸接受有效刷卡后，打开闸门，允许人员通过，在规定的时间内人员通过通道闸，闸门自动关闭，如果人员在规定的时间以外仍然滞留在通道中，通道闸将发出超时报警信号，如果人员在规定的时间内未进入通道，则闸门自动关闭。

速通门岗位职责

速通门岗位职责岗位背景与职责概述速通门是一种应用广泛的智能通行系统，旨在提供便捷高效的人员出入管理服务。

速通门岗位作为整个速通门系统的重要组成部分，担负着确保系统正常运行以及安全保障的重要职责。

本文将从以下几个方面详细描述速通门岗位的职责。

系统操作与维护作为速通门岗位的主要职责之一，系统操作与维护是保证整个通行系统顺利运行的基础。

操作员需要具备系统操作、调试和故障排除的相关技能。

他们负责日常的系统开启、关闭、参数设置等基本操作，监控门禁设备和人员通行情况的实时数据，及时发现并解决设备故障。

岗位人员需要掌握速通门系统的使用手册，了解各个设备的性能和特点，熟悉系统的运行流程，能够正确处理各类常见故障。

岗位人员还需负责检查设备的硬件和软件工作状态，保证其正常运行。

对于一些常见的故障，例如设备通行速度变慢、损坏、数据不准确等情况，操作员需要及时处理。

此外，岗位人员还要负责备份重要数据，更新软件版本，保证系统的稳定性和安全性。

接待与监控作为安全保障的重要一环，岗位人员需要承担接待和监控的职责。

他们负责登记进出人员的信息，保证合法人员正常通行；对于不明身份或异常情况的人员，要进行严格核实和记录。

操作员需要与来访人员有效沟通，提供相关服务并确保其安全。

在遇到特殊情况下（如火警、突发事件等），岗位人员需要迅速反应并采取相应的措施，警示、引导人员安全疏散。

监控是保障通行安全的重要手段之一，岗位人员需熟悉监控系统的操作方法和监控图像分析技巧，及时发现异常情况。

他们要通过监测摄像头，确保通行系统正常运行，防范各类安全风险和突发事件。

岗位人员需保持警惕，对有破坏行为的人员采取相应的措施，并及时向相关部门报告。

数据统计与报表岗位人员要进行定期的数据统计与报表工作。

他们需收集、整理、分析通行数据，如进出人数统计、通行时间分布等，为管理部门提供相应的报表和数据支持。

通过数据分析，可以发现通行系统的问题和瓶颈，提出相关的改进建议，提高通行效率和系统的智能化水平。

迅达门自动门维修手册说明书

Important warranty, user informationand service record for your automatic doorAutomatic sliding door operating & maintenance manualFor power-operated doors to EN 16005AUTOMATIC SLIDING DOOR LOG BOOKContentsService and maintenanceService and maintenance Warranty statement Door system dataReport for initial inspection User guideFirst entry last exit procedure (if fitted)Daily ChecksRegular inspection and maintenance Inspection reports23456-7 891011-15Why the necessity?All doors, whether manual or automatic, are complex components subject to punishing wear and tear. Therefore to ensure that they continue to functionproperly, regular service and maintenance is imperative.Regular door maintenance helps prevent accidents, reduces breakdowns and the accompanying inconvenience, and prolongs the life of the door operator.There are also legal implications regarding the servicing of all door types which must be adhered to, to ensure the safety of users at all times. All safety requirements for power operated doors are stipulated in EN 16005:2012 Power operated pedestrian doorsets -Safety in use. All dormakaba service engineers are trained to comply with this standard through the Automatic Door Suppliers Association (ADSA) examination of competency.dormakaba provides a tailored, local resource for the servicing and maintenance of all brands of:• automatic swing• sliding and revolving doors • manual doors • fire doors• access control systems • industrial doors • roller shutters • gates & barriersFor more information visit AUTOMATIC SLIDING DOOR LOG BOOKWarranty statementService and maintenancePlease note the legal implications regarding the installation and servicing of automatic doors which must be adhered to, so as to ensure the safety of users at all times as stipulated in EN 16005:2012 Power operated pedestrian doorsets – Safety in use.Product registrationAny decision to register your product does not affect your statutory rights under the UK Sale of Goods Act 1979.If you would like to register your product with dormakaba please visit Alternatively, you can contact the dormakaba UK Service Hotline on:0800 212 380************************LimitationsThis warranty does not apply to defects resulting from Customer actions, such as mishandling, improper installation, operation outside of design limits, misapplication, attempted repair, or unauthorized modification.Any additional warranty provided by the selling agent does not imply or transfer any additional obligation to dormakaba regarding this product.dormakaba standard terms and conditions will apply at all times and are available on request.dormakaba are not liable for the consequences of any third party claim on its products, which are sold in the knowledge that installation is carried out by competent staff and maintained in accordance with current safety standards.Thank you for purchasing a dormakaba product which has been designed and manufactured to provide many year’s problem-free operation.All products sold by Dorma UK Ltd are warranted against defect in materials and workmanship for a period of 12 months from the date of purchase on a return to factory basis.If you believe this product has a defect or has failed during normal use within the warranty period, please contact the authorised agent from whom you bought the product and who will make arrangements for its return.Alternatively, if your product was installed bydormakaba please contact us directly as detailed below to discuss the return of the unit, with the product serial number. dormakaba standard terms and conditions will apply at all times and are available on request.AUTOMATIC SLIDING DOOR LOG BOOKDoor system dataTo be completed by a qualified technician at installation Manufacturer: DORMA UK Ltd, Wilbury Way, Hitchin, SG4 0AB Type of operator/door: Sliding DoorTo be completed by a qualified technician at installationProduct name: ES200 / BST / CS80 MAGNEO / Other (please state below):(delete as applicable)..........................................................................................................................................................................Sales Order No.: ..................................................................................................................................................................................Asset No.: .............................................................................................................................................................................................Year of mission date: ..............................................................................................................................................................................Installed by: DORMA UK Ltd / Other (please state company)Doorset location / reference: ............................................................................................................................................................Additional information:................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................In order that an automatic door operator may comply with the requirements of EN16005:2012 a risk assessment should be carried out prior to installation which assesses the risk to users. It is the responsibility of the installer to ensure that a door system is compliant.AUTOMATIC SLIDING DOOR LOG BOOKReport for initial inspectionTo be completed by a qualified technician at installationThe following list of components and functions to be inspected is only a reference and shall help the inspector during inspection. From case to case, the inspection can be more or less comprehensive. In principle, the inspector has to perform a visual inspection and functional tests to check the system for completeness. In addition, the system status and the efficiency of the components and the respective safety equipment require inspection. Please consider the separate inspection instructions supplied with the individual door types.3.1 General•Functionality of door system •Proper mounting •Connections/Power supply •Guide rails and base sections •Force transmission/Incremental encoder •Bearings•Glazing, Cover•Coating, Corrosion protection•All documentation complete3.2 Check safety equipment accordingto risk assessment to EN 16005 •Finger protection (crushing, shearing and drawing in)•Safety sensors/Sensor monitoring •Reversing/Stop equipment •Safety screen•Safety contact strips (SCS) •Force limitation•Emergency pushbuttons• Safety sensors• Fire alarm connection• Batteries 3.3 Control elements •Pushbuttons/switches •Contact mats•Radio controls/Remote controls •Card readers•Motion detectors3.4 Function•Friction clutch•NC contact (limit switch) •NO contact (limit switch) •Locking device, Deactivation •Deactivation of safety equipment •Emergency manual operation •Emergency Opening/Rubber cord/ Auxiliary drive3.5 Check door system for properfunctioning in all operation modes •OFF•AUTOMATIC •PERMANENT OPEN •PARTIAL OPEN•EXIT ONLY•LOCKING DEVICESUser guide123Program switch settings:AUTOMATIC SLIDING DOOR LOG BOOKThe unit is switched off. In the case of units with theoptional locking mechanism, the door is electro-mechanically locked.Door may be opened using first entry - last exit switches if fitted.If a person or object comes within range of the radar detectors, the door opens to full opening width and closes at the end of the preset hold-open time.The external sensor is deactivated, the door may only be used from the inside (e.g. one way function on close of business).If a person or object comes within range of the internal sensor, presence sensors or light barriers, the dooropens to its full opening width and closes the end of the preset hold-open time.The operator can be programmed to lock or unlock in the ‘EXIT ONLY’ position by a dormakaba Service engi-neer.Old Program SwitchNew Program Switch.........4PARTIAL OPENING5PERMANENTLY OPENAUTOMATIC SLIDING DOOR LOG BOOKIf a person or object comes within range of thedetectors or presence sensor, the door opens to the preset partial opening width and closes at the end of the preset hold-open time.The opening width of the door can be adjusted individually. To do this:Close the door using the OFF switch settingSet the program switch to PERMANENTLY OPENThe door opens at low (check) speedAs soon as the door reaches the desiredpartial opening width, set the program switch to PARTIAL OPENINGThe door stops and the control unit stores the desired positionThe door commences a closing cycleThe door opens in check speed to its full opening width and remains in the position until another function is selected.In the event of power failureIf the program switch is in the AUTOMATIC position, the door will fail openIf the program switch is in the OFF position, the door will remain closed To open the door, turn the program switch to AUTOMATIC. After a short delay the door will open at reduce speed and remain open until power is restored or the program switch is turned to Off.Alternatively, if FIRST ENTRY - LAST EXIT is fitted, operate button once or key once to open the door. To close the door, operate either button or key once.This sequence can be carried out as required until power is restored.First entry last exit procedure (if fitted)The purpose of this system is to allow an opening of the door when the Program Switch is in the OFF position and the sensors are not operable.This means that people should not open or close the door MANUALLY which could result in a major failure of the operator and potentially damage components.There will be a GREEN BUTTON near to the door on the inside of the building.To EXIT the building:1. Turn the program switch to the OFF position and letthe door close (stand away from the door to ensure the sensor does not detect you).2. Set the building alarm (if you have one)3. Operate the GREEN BUTTON to open the door4. Exit and allow the door to close (stand away fromthe door to ensure the sensor does not detect you), then lock the door in the centre with the key when closed.To ENTER the building:There will be a KEY SWITCH or other access control near to the door on the outside of the building1. Unlock the door, before using the KEY SWITCH2. Operate the key switch on the outside of thebuilding, this will open the door3. Enter the building (stand away from the door toensure the sensor does not detect you), the door will then close behind you4. Turn off the building alarm (if you have one)5. Put the program switch into the required position,or leave it in the OFF position6. If required to admit staff members before openinghours, simply press the GREEN BUTTON. The doorwill open then re-close.AUTOMATIC SLIDING DOOR LOG BOOKDaily checks - facility operatorA safety check should be performed daily by the facility operator on each automatic door.ActivationWalk toward the door at a normal pace. The door should start opening before you reach a minimum of 1000mm from the door. If the door is an escape route,a minimum of 1500mm applies in the direction of escape.Repeat for the other side if the door has two-way operation.SafetyNote: In order to test the safety sensors we recommend using an approved test object measuring 200mm x 300mm x 700mm high to test the door safety as detailed in EN16005.Activate the door to open, place the test object in the threshold, move away from the threshold and verify that the door stays open.Remove the test object from threshold area, after a short time delay the door should close.For sensors covering the area of door travel, place the test object directly beneath the sensor. When activated, the door should open at reduced speed.Low Energy Sliding Doors (CS80 Magneo only)•May not be fitted with safety devices as described above•Often have manual activation devices •Travel at lower speeds with lower force•In the opening direction will stop when obstructed and continue after the obstruction is removed •In the closing direction will reverse open when obstructedGeneral Observations•Check the door area does not present tripping or slipping hazards•Check all door panels for broken/cracked glass•Check all doors have correct warning and information signs displayed•Check the position and security of screens & barriers •Check operation of manual or remote activation, or emergency stop button if fitted•Check for distractions and obstructions in the vicinity of the doors•Check all equipment and cabling is securely fixed If you have questions about any of the above items, please contact dormakaba UK Service. Safety devices for all doors should be checked by an ADSA qualified technician at least once a year.If you have a problem you cannot correct, turn off the door and call your local dormakaba on 0800 212 3800.AUTOMATIC SLIDING DOOR LOG BOOKADSA Occupier Safety CheckVideosRegular inspection and maintenanceTo be undertaken by a qualified technician.The following list describes what has to be done during the maintenance of dormakaba door systems. Always consider the mounting and operation instructions during maintenance.Please observe the requirements for fire doors, emergency exits and escape routes during inspection, if applicable. The current state of technology has to be taken into consideration when assessing the door system with regard to safety-related questions.Note down any safety-relevant error/deficit in the log book and on the performance sheet. The inspector must note down the scope, results and date of the inspections and the facility operator has to keep these documents for at least one year.ES/CS complete door systems (sliding doors)1. Clean and check the track section, retension/repair/replace as required2. Check toothed belt and retension/replace asrequired3. Check escape route function of escape routesystems (check rubber cord and retension/replace as required)4. Check door suspension and adjust/repair/replace as required5. Check floor guide and adjust/repair/replace asrequired6. Check all fixing components and retension asrequired7. Check all settings and readjust as required8. Check all safety equipment and adjust/repair/replace as required9. Check and reaadjust all safety clearances asrequired (finger protection, crushing and shearing edges, drawing-in)10. Check all control elements and adjust/repair/r eplace as required11. Check wear parts such as toothed belt, motor,pulley and locking device once a year and replace as required (see complete wear part list)12. Write down inspection and maintenance report the log bookPlease note we recommend that sliding doorswhich are emergency exits or escape routes are inspected twice a year13. Replace rechargeable battery packs approximatelyevery two yearsAUTOMATIC SLIDING DOOR LOG BOOKInspection reportsThe facilities operator should ensure that this log book is available for the qualified technician on his arrival at site.If it is not available then it is the responsibility of the facilities operator to record the visit.AUTOMATIC SLIDING DOOR LOG BOOK112021-10AUTOMATIC SLIDING DOOR LOG BOOK122021-10AUTOMATIC SLIDING DOOR LOG BOOK132021-10AUTOMATIC SLIDING DOOR LOG BOOK142021-10AUTOMATIC SLIDING DOOR LOG BOOK152021-10CENTRAL LOCATIONSdormakabaDORMA UK LtdWilbury WayHitchin, HertsSG4 0ABSERVICE BRANCHES SCOTLANDUnit 1, Almond Road, Middlefield Industrial Estate, FalkirkFK2 9HQIRELANDPO Box 1050MaynoothCo. KildareNORTH WESTUnit 10, Meadow Business Park Meadow Lane, BoltonBL2 6PT dormakabaKaba LtdLower Moor WayTiverton, DevonEX16 6SSLONDON NORTH & SOUTHWilbury WayHitchinHertfordshireSG4 0ABMIDLANDSNORTH EASTSOUTH WESTLower Moor WayTivertonDevonEX16 6SSUnit 32 Crowther RoadCrowther Industrial EstateWashingtonTyne & WearNE38 0ADThe CourtyardJohn Harper StreetWillenhallWest MidlandsWV13 1REE:************************。

摆式速通门快速入门说明书V1.03

摆式速通门快速入门资料版本：V1.03感谢您购买我们的产品。

使用时若遇到任何问题，请您及时和销售人员联系。

声明未经本公司书面许可，任何单位和个人不得擅自摘抄、复制本手册内容的部分或全部，并不得以任何形式传播。

由于产品版本升级或其他原因，本手册内容会不定期进行更新。

本手册仅作为使用指导，本手册中的所有陈述、信息和建议不构成任何明示或暗示的担保。

本公司对使用本手册或使用本公司产品导致的任何特殊、附带、偶然或间接的损害不承担责任，包括但不限于商业利润损失、数据或文档丢失产生的损失，因遭受网络攻击、黑客攻击、病毒感染等造成的产品工作异常、信息泄露。

安全须知负责安装和日常维护本设备的人员必须具备安全操作基本技能。

在操作本设备前，请务必认真阅读和执行产品手册规定的安全规范。

∙此为A级产品，在生活环境中，该产品可能会造成无线电干扰。

在这种情况下，可能需要用户对其干扰采取切实可行的措施。

∙严禁无电工证或未经电气培训的技术人员从事强电220VAC等电气连接作业。

∙没有合适的安装地基，不允许安装固定设备。

∙请确保设备安装平稳可靠，周围通风良好，设备在工作时必须确保通风口的畅通。

禁止重物挤压设备，否则将会出现不必要的损坏。

∙请确保设备工作在许可的温度、湿度、供电要求范围内，并良好接地，满足防雷要求，避免置于多尘、强电磁辐射、震动等场所。

∙请保护电源软线免受踩踏或挤压，特别是在插头、电源插座和从装置引出的接点处。

∙必须遵照附件的接线图进行设备的接线作业。

∙请将设备和其他设备电源接口分开，否则容易因为设备之间的相互干扰导致产品损坏。

∙必须具备一个漏电开关或者其他的电流控制操作装置。

∙在投入正常使用前，请确保设备功能测试合格。

∙安装完成后请检查正确性，以免通电时由于连接错误造成人体伤害和设备部件损坏！∙设备系统通电后请勿触碰带电部件，如开关电源、电机减速机、电阻器、灯具等，因为通电后带电部件可能温度较高容易灼伤皮肤。

∙异常断电可能造成设备损坏或功能异常，若设备在频繁断电的环境中使用，请配备UPS。

xxxx 大厦速通门维保合同书

xxxx 大厦速通门维保合同书【大包合同】合同编号:甲方: xxxx有限公司乙方: 北京xxxx有限责任公司经甲、乙双方协商，甲方就使用的乙方智能产品，委托乙方进行系统升级并定期维护保养，达成如下合约：一、每年设备保养金额：二、维保时间及付款方式：维保日期为2019年月日至2024年6月日，本合同签定后十五个工作日内支付合同总金额的50%，即元整（大写：）；合同执行每六个月为一个付款循环周期，每六个月后后十五个工作日内支付合同总金额的50%。

乙方向甲方开具正式相应普增值税专用发票。

甲方开户信息开户名：xxxx有限公司开户帐号：xxxx开户行：xxxx地址：xxxx纳税识别号：912 xxxx增值税纳税分类：√□一般纳税人□小规模纳税人乙方开户信息开户名：北京xxxx有限责任公司开户帐号：xxxx开户行：xxxx地址：xxxx纳税识别号xxxx联系人：xxxx 电话：xxxx增值税纳税分类：√□一般纳税人□小规模纳税人增值税税率：□16% □13% □10% √□6% □3% □0%发票类型：√□增值税专用发票□非增值税专用发票三、维修保养服务1、乙方为甲方提供24小时的电话报修、咨询服务。

2、乙方每两个月上门巡访1次，每季度为甲方安排一次设备检修保养，检查故障隐患，听取甲方使用意见，及时提出整改方案，并将不定时或应甲方要求上门服务，提供有关使用管理方面的咨询及建议。

在重大节假日前，为甲方提供预约式上门巡检，且每次上门服务需有甲方人员的确认单，双方签字。

3、乙方免费提供应急报修服务，服务热线：xxxx。

当系统发生故障时，接到甲方专人通知，在8：30—17：00时间段内（法定节假日除外），乙方将派出技术人员在4小时内赶赴现场进行处理，在其它时间段的报修，乙方将在第二天赶到现场处理；如果故障比较严重，在二天之内处理不好的，乙方将免费提供设备替换件为客户换上使用。

4、乙方对甲方使用的标准管理软件提供免费更新服务。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

速通门维护手册
1，表面清洗：
（1）旋转门框架部分由306不锈钢板焊接而成，平时是不会生锈的，可以把毛巾放水中浸泡，然后拧干擦拭表面，擦拭干净后自然晾干。

最后
喷上一层碧丽珠不锈钢专用清洁剂，再用毛巾擦拭均匀。

碧丽珠中含
有蜡质可有效保护不锈钢不生锈，触摸后不留手印。

（2）不要用酸性或碱性溶剂清洁，以免损伤表面。

（3）不要用湿毛巾擦拭读卡器或指示灯等带电元器件。

2，机械机构保养：
（1）速通门内部机械结构复杂，机架由不锈钢或碳钢加工而成并做了镀锌防护处理，一般情况下不太容易生锈。

但是由于在室外使用，设备本
身无法密封，遇到下雨刮风很容易进水，腐蚀设备，在潮湿的环境中，
也容易生锈，所以必须在易生锈的地方涂上一薄薄层黄油，主要起到
防锈作用。

（2）转动部件润滑。

运动部件长期使用必须定期润滑，否则容易磨损配件，设备使用不平稳。

比如轴承、铜套，各种连接件等，必须用手抹上一
层润华油。

润滑油可选用美孚黄油。

（3）电机及减速箱保养。

固力保速通门上的电机和减速箱属于免维修配件，平时做一些清洁工作即可。

如果损坏由厂家进行更换。

切不可拆
下来自行维修，以免造成不必要的损坏。

3，控制部分保养：
（1）速通门的电路板是直接放在机箱内的，潲雨、漏水、凝结水都可能损坏电路板，所以平时使用时遇到大雨大风天气最好给设备罩上雨衣，
或者把电源切断，等到天晴后再启用。

要定期检查防水，发现有漏水
现象及时做密封处理。

由于门扇处不能完全密封，所以设备很容易进
灰尘，灰尘落到电路板上容易引起短路，烧坏电路板，灰尘落到轴承
等转动部件上和润滑油混在一起，不利于设备转动，所以必须定期清
理灰尘。

（2）如果电路板上的尘土较厚，可以用专用吹风机清理，也可手动清理，如果还不能清理干净，最好用电路板专用带电清洁剂清洗。

（3）转动机构内定期更换润滑油。

4，保养频率及方法：
（1）机箱表面清洁每周做一次即可。

（2）旋转机构每通行10万次保养一次或每季度年做一次。

每年做一次中型保养（润滑、紧固、小件更换）；每3年做一次大型保养（润滑、
紧固、配件更换、参数修改）。

（3）电路板可根据实际情况决定。