控制阀标准
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
GB/T8098-2003
液压传动带补偿的流量控制阀安装面
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
JB/T7387-1994(2005复审)
工业过程控制系统用电动控制阀
NF C46-520-1993
NF E49-091-2002
气压传动.控制阀和其它部件的孔口和控制机械的验证
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
NF E49-080-2-2002
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF E48-435-1998
液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸
(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF C46-510-2001
工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心
(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF E49-080-1-2002
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF C46-521-2001
工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法
(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF C46-522-1994
工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4)
(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF C46-505-1998
绝缘过程控制阀.第2-3部分:流量容量.试验过程
(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-630-1998
工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器
NF C46-519-2001
工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声
(Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
XP E29-140-1999
使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的)
(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
GB/T8100-1987
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面
Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
NF C46-531-2001
工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
Industrial-process control valves Part 5: Marking
GB/T2514-1993
四油口板式液压方向控制阀安装面
Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T15623.2-2003
液压传动电调制液压控制阀第2部分：三通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998
工业过程控制阀第7部分:控制阀数据单
Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998
工业过程控制阀第8部分:噪声的考虑第1节:实验室内测量空气动力流流径控制阀产生的噪声
GB/T8106-1987
方向控制阀试验方法
Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001
气动五气口方向控制阀第二部分带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 2:Mounting interface surfaces with optional elettrical connector
GB/T8104-1987
流量控制阀试验方法
Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001
气动五气口方向控制阀第三部分:功能识别编码体系
Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T17213.1-1998
工业过程控制阀第1部分:控制阀术语和总则
Industrial--Process control valves Part 1: Control valve terminology and general considerations
GB/T17213.5-1998
工业过程控制阀第5部分:标志
(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positionermounting on linear actuators.)
工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量
(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
GB/T8105-1987
压力控制阀试验方法
Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001
气动五气口方向控制阀第一部分:不带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
NF E29-453-2000
工业过程控制阀门
(Industrial process control valves.)
标准编号
标准中文名称
标准英文名称
NF E29-316-5-2001
供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
标准编号
标准中文名称
标准英文名称
GB/T13852-1992
船用液压控制阀技术条件
General specification of hydraulic control valves for ship
GB/T17490-1998
液压控制阀油口、底板、控制装置和电磁铁的标识
Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids
液压传动带补偿的流量控制阀安装面
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
JB/T7387-1994(2005复审)
工业过程控制系统用电动控制阀
NF C46-520-1993
NF E49-091-2002
气压传动.控制阀和其它部件的孔口和控制机械的验证
(Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components.)
NF E49-080-2-2002
气压液动.五通方向控制阀.第2部分:任选电气连接器的安装接口面
(Pneumatic fluid power - Five-port directional control valves - Part 2 : mounting interface surfaces with optional electrical connector.)
NF E48-435-1998
液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸
(Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF C46-510-2001
工业过程控制阀.第3-1部分:尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型角度控制法兰阀门的中心
(Industrial-process control valves - Part 3-1 : dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, a)
NF E49-080-1-2002
气压液动.五通定向控制阀.第1部分:不带电连接器的安装接口
(Pneumatic fluid power - Five-port directional control valves - Part 1 : mounting interfaces without electrical connector.)
NF C46-521-2001
工业过程控制阀.第8部分:噪声问题.第3节:气动控制阀噪声预测法
(Industrial-process control valves - Part 8-3 : noise considerations - Control valves aerodynamic noise prediction method.)
NF C46-522-1994
工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4)
(Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF C46-505-1998
绝缘过程控制阀.第2-3部分:流量容量.试验过程
(Industrial-process control valves. Part 2-3 : flow capacity. Test procedures.)
NF C46-630-1998
工业过程控制阀.第6部分:控制阀与定位器连接用安装细节.第1节:线性传动装置上安装的定位器
NF C46-519-2001
工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声
(Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
XP E29-140-1999
使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的)
(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
GB/T8100-1987
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面
Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
NF C46-531-2001
工业过程控制阀.第6-2部分:定位器装到控制阀的安装细则.旋转传动装置上安装的定位器
(Industrial-process control valves - Part 6-2 : mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators.)
Industrial-process control valves Part 5: Marking
GB/T2514-1993
四油口板式液压方向控制阀安装面
Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
GB/T15623.2-2003
液压传动电调制液压控制阀第2部分：三通方向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 2:Test methods for three-way directional flow control valves
GB/T17213.7-1998
工业过程控制阀第7部分:控制阀数据单
Industrial-process control valves Part 7: Control valve data sheet
GB/T17213.8-1998
工业过程控制阀第8部分:噪声的考虑第1节:实验室内测量空气动力流流径控制阀产生的噪声
GB/T8106-1987
方向控制阀试验方法
Hydraulic fluid power--Valves--Testing method of directional control valves
GB/T7940.2-2001
气动五气口方向控制阀第二部分带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 2:Mounting interface surfaces with optional elettrical connector
GB/T8104-1987
流量控制阀试验方法
Hydraulic fluid power--Valves--Testing method of flow control valves
GB/T7940.3-2001
气动五气口方向控制阀第三部分:功能识别编码体系
Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
GB/T17213.1-1998
工业过程控制阀第1部分:控制阀术语和总则
Industrial--Process control valves Part 1: Control valve terminology and general considerations
GB/T17213.5-1998
工业过程控制阀第5部分:标志
(Industrial-process control valves. Part 6 : mounting details for attachment of positioners to control valves. Section 1 : positionermounting on linear actuators.)
工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量
(Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
GB/T8105-1987
压力控制阀试验方法
Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T7940.1-2001
气动五气口方向控制阀第一部分:不带电气接头的安装面
Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
GB向流量控制阀试验方法
Hydraulic fluid power-Electrically modulated hydraulic control valves-Part 1:Test methods for four-way directional flow control valves
NF E29-453-2000
工业过程控制阀门
(Industrial process control valves.)
标准编号
标准中文名称
标准英文名称
NF E29-316-5-2001
供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
标准编号
标准中文名称
标准英文名称
GB/T13852-1992
船用液压控制阀技术条件
General specification of hydraulic control valves for ship
GB/T17490-1998
液压控制阀油口、底板、控制装置和电磁铁的标识
Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids