沃尔沃挖掘机700说明书

合集下载

沃尔沃挖机使用小常识

Volvo Construction Equipment Customer Support Aftermarket & Soft Products
15
Regional Service Manager Monthly Report
14.沃尔沃纯正滤芯与仿冒品之间的区别？
纯正沃尔沃滤芯与市场上的仿冒件的区别主要在以下几处地方： 1）滤芯套筒表面； 2）滤芯底盘塑料盖； 3）滤芯底盘密封环和内垫片； 4）滤芯螺纹孔； 5）滤芯过滤介； 6）滤芯内筒；
Volvo Construction Equipment Customer Support Aftermarket & Soft Products
4
Regional Service Manager Monthly Report
3.标准质保期内沃尔沃将提供哪些免费服务？
标准质保期内沃尔沃将根据设备使用小时数为用户提供如下免人工费的服务： 1. 标准交机服务； 2. 100H磨合期的定检保养； 3. 1000H的定检保养； 4. 2000H的定检保养； 5. 出保检查另外，质保期内针对产品质量导致的故障，我们也将提供免费故障诊断和排除的服务。
Volvo Construction Equipment Customer Support Aftermarket & Soft Products
20
Regional Service Manager Monthly Report
2. 发动机正常运转为何会有一定的机油消耗？
机油输送到发动机的运动部件，对各运动部件进行润滑。在润滑活塞、缸套、涡轮增压器等部件时： —— 极少量的一部分机油会燃烧掉； —— 一部分因高热而被蒸发；所以机油会随着工作时间的增加而减少，发动机正常工作过程中保持一定量的机油消耗是正常现象。

VOLVO挖掘机产品知识介绍

2330mm
L 总长度 9690mm
F 配重离地间隙
1025mm
M 大臂高度 3000mm
Volvo Construction Equipment
EC210BLC工作范围
1 October, 2003
项目
单位 mm
A 最大挖掘半径
9940
B 最大挖掘半径（停机面）
9750
C 最大挖掘深度
6730
2840mm
G 轮间距 3660mm
1 October, 2003
B 总宽度
2990mm H 下车总长度
4460mm
C 驾驶室总高度 2990mm
I 履带轨距 2390mm
D 尾部回转半径
2940mm K 最小离地间隙
470mm
E 发动机罩总高度
2390mm
L 总长度 10020mm
31
F 配重离地间隙
单位挖掘力 (ISO)
kg/mm
单位挖掘力％
1.1
1320
11.4
100
1.0
1210
12.4
109
0.92
1145
13.1
115
0.9
1065
14.1
124
1 October, 2003
11
Volvo Construction Equipment
铲斗的宽度与挖掘力
EC240B & EC240BLC
Arm(m)
Bucket(m3) SAE
6 2.97
1.1
1.2
5.85 3.045
1.0
6 2.96
1.0
1.2
1 October, 2003

沃尔沃cx145dSR短臂挖掘机规格书说明书

CX145D SRSHORT RADIUS EXCAVATORTIER 4 FINALAir-conditioner output 13,492 BTU/hr Heater output 12,897 BTU/hr Sound level inside cab – ISO6395 70 dBA Electrical outlet 12 Volt Cab interior light 10 watt Side view camera – right Standard Seat Air-suspensionBoom 15 ft 2 in (4 630 mm) Arm 8 ft 2 in (2 500 mm) Bucket digging force 20,200 lb·ft (90 kN) w/ Auto Power-Boost 21,400 lb·ft (95 kN) NOTE: *Digging force ratings based on ISO6015.Operating weight 32,100 lb (14 600 kg) w/ shoes 2 ft 0 in (600 mm) w/ boom 15 ft 2 in (4 630 mm) w/ arm 8 ft 2 in (2 500 mm) w/ bucket 882 lb (400 kg) w/ counterweight 7,860 lb (3 570 kg) NOTE: W/ operator/full fuel/standard equipment.@ Standard operating weight 5.2 psi (0.36 bar) w/ 23.6 in (600 mm) triple grouser shoes,8 ft 2 in (2.5 m) Arm, 0.65 yd3 (0.5 m3) bucketSystem design Open center Main pumps Two-variable displacement/axial piston Max. rated flow per pump:34.1 gpm (129 L/min) @ 2000 RPM System pressures:Boom, arm and bucket 4,970 psi (343 bar) w/ power boost 5,260 psi (363 bar) Travel circuit 4,970 psi (343 bar) Swing circuit 4,050 psi (279 bar) Pilot pump 1 x gear design Max. capacity 5.3 gpm (20 L/min) Controls w/ boom/arm holding valve Right track travel, 1 x Four-spool section bucket, boom andarm acceleration.Left track travel, 1 x Five-spool section auxiliary, swing, boomand arm acceleration.Work mode selections SP: Speed PriorityH: Heavy-DutyA: Automatic Swing motor Fixed displacementaxial piston Swing final drive Planetary gear reduction Travel motor Two-speed independent Boom cylinders Two (2) Cylinder bore 4.1 in (105 mm) Cylinder rod diameter 3.0 in (75 mm) Cylinder stroke 44.1 in (1 120 mm) Arm cylinder One (1) Cylinder bore 4.5 in (115 mm) Cylinder rod diameter 3.1 in (80 mm) Cylinder stroke 43.6 in (1 108 mm) Bucket cylinder One (1) Cylinder bore 3.7 in (95 mm) Cylinder rod diameter 2.6 in (65 mm) Cylinder stroke 34.7 in (881 mm) Fuel tank 53 gal (200 L) Hydraulic system 42 gal (158 L) Hydraulic tank 20 gal (75 L) Engine oil w/ filter 4.5 gal (17 L) Swing drive 0.6 gal (2.2 L) Final drive 0.6 gal (2.1 L) Cooling system 4.4 gal (16.5 L)Swing speed 0 – 12.5 RPM Swing torque 27,400 lb·ft (37 000 N·m) Swing brake Mechanical disc Undercarriage:Length 12 ft 4 in (3 760 mm) Track gauge 6 ft 6 in (1 990 mm) Carrier rollers – each side 2 Track rollers – each side 7 Shoes – triple grouser 46 Shoe width – std. 2 ft 0 in (600 mm) Link pitch 6.8 in (172 mm) Track:Chain Grease lubricated/strutted Guides Single Adjustment HydraulicModel Isuzu AM-4JJ1XCEGR, SCR and DOC Emissions Certification Tier 4 Final Fuel Requires ultra low-sulfur fuelB5 biodiesel tolerant Type Water-cooled, 4-cycle,high pressure common rail system.Turbo-charged w/ air cooled intercooler Cylinders 4-cylinder in-line Displacement 183 in3 (3.0 L) Bore/Stroke 3.76 x 4.13 in(95.4 x 104.9 mm) Fuel injection Direct injection – electronic Fuel filter Replaceable,full flow spin-on cartridge Air filter Dry type element w/warning restriction indicator Oil filter Replaceable,full flow spin-on cartridge Engine gradeability:Side-to-side 35˚ Fore and aft 35˚Net horsepower – SAE J1349 @ 2000 RPM:102 hp (76.4 kW) Net max. torque – SAE J1349 @ 1800 RPM:257 lb·ft (349 N·m) Cooling operating range:109˚ to -13˚ F (43˚ to -25˚ C) Oil Requires low-ash oil CJ-4Travel control Dual stage relief/counter balance design Brakes Mechanical disc Service brakes SAHR disc – each motor Two speed travel:Max. high speed 3.5 mph (5.6 kph) Max. low speed 2.1 mph (3.4 kph) Automatic downshiftDrawbar pull 26,100 lbf (116 kN) Gradeability 70% – 35˚ slopeVoltage 24 Volts Alternator rating 50 amp Batteries 2 x 12 Volt Battery reserve capacity 72 Ah/5 hour Work lights – 4 24 Volt/70 watt 1 boom, 1 upper, 2 cabLJI EGHKFDABCDIMENSIONS8 ft 2 in (2.50 m) Arm9 ft 10 in (3.01 m) Arm6 ft 11 in (2.11 m) ArmA. Overall height – to top of boom 9 ft 4 in (2 840 mm) 8 ft 10 in (2 680 mm) 9 ft 0 in (2 750 mm)B. Cab height9 ft 3 in (2 820 mm) 9 ft 3 in (2 820 mm) 9 ft 3 in (2 820 mm)C. Overall length – with attachment 24 ft 1 in (7 350 mm) 24 ft 1 in (7 340 mm) 24 ft 1 in (7 340 mm) D. Overall length – without attachment 12 ft 4 in (3 760 mm) 12 ft 4 in (3 760 mm) 12 ft 4 in (3 760 mm)E. Width of upper structure 8 ft 2 in (2 490 mm) 8 ft 2 in (2 490 mm) 8 ft 2 in (2 490 mm)F. Track overall length12 ft 4 in (3 760 mm) 12 ft 4 in (3 760 mm) 12 ft 4 in (3 760 mm)G. Track overall width with 23.6 in (600 mm) shoes 8 ft 6 in (2 590 mm) 8 ft 6 in (2 590 mm) 8 ft 6 in (2 590 mm)H. Track shoe width2 ft 0 in (600 mm) 2 ft 0 in (600 mm) 2 ft 0 in (600 mm)I. Center to center – idler to sprocket 10 ft 0 in (3 040 mm) 10 ft 0 in (3 040 mm) 10 ft 0 in (3 040 mm)J. Upper structure ground clearance 2 ft 11 in (880 mm) 2 ft 11 in (880 mm) 2 ft 11 in (880 mm)K. Minimum ground clearance 1 ft 5 in (440 mm) 1 ft 5 in (440 mm) 1 ft 5 in (440 mm)L. Rear tail swing radius5 ft 0 in (1 530 mm)5 ft 0 in (1 530 mm)5 ft 0 in (1 530 mm)NOTE: *With 23.6 in (600 mm) track shoe, 882 lb (400 kg) bucket, 165 lb (75 kg) operator, full fuel and standard equipment.Line drawings are for illustrative purpose only and may not be exact representation of unit.ApplicationWidthSAE Rated CapacityHeavy-Duty Pin-On18 in to 48 in (457 mm to 1 219 mm) 0.36 yd 3 to 1.08 yd 3 (0.28 m 3 to 0.83 m 3)Heavy-Duty Hi-Capacity Pin-On 18 in to 42 in (457 mm to 1 067 mm) 0.42 yd 3 to 1.08 yd 3 (0.32 m 3 to 0.83 m 3)Heavy-Duty Coupler 18 in to 48 in (457 mm to 1 219 mm) 0.31 yd 3 to 0.95 yd 3 (0.24 m 3 to 0.73 m 3)Ditch Cleaning Pin-On48 in to 60 in (1 219 mm to 1 524 mm)0.64 yd 3 to 1.02 yd 3 (0.49 m 3 to 0.78 m 3)ABJG8 ft (2 440 mm)8 ft 2 in (2.50 m) Arm 9 ft 10 in (3.01 m) Arm 6 ft 11 in (2.11 m) ArmA.Maximum dig radius 27 ft 2 in (8 290 mm) 28 ft 8 in (8 740 mm) 26 ft 1 in (7 940 mm)B.Dig radius at groundline 26 ft 8 in (8 140 mm) 28 ft 3 in (8 600 mm) 25 ft 6 in (7 780 mm)C.Maximum dig depth 18 ft 1 in (5 510 mm) 19 ft 9 in (6 010 mm) 16 ft 9 in (5 110 mm)D.Dig depth – 8 ft 0 in (2.44 m) level bottom 17 ft 4 in (5 290 mm) 19 ft 2 in (5 830 mm) 16 ft 0 in (4 870 mm)E.Dump height 22 ft 9 in (6 940 mm) 23 ft 11 in (7 290 mm) 21 ft 10 in (6 660 mm)F.Maximum reach height 30 ft 8 in (9 340 mm) 31 ft 9 in (9 690 mm) 21 ft 5 in (9 060 mm)G.Bucket rotation 178° 178° 178°H.Maximum vertical wall dig depth 16 ft 1 in (4 900 mm) 17 ft 4 in (5 280 mm) 15 ft 0 in (4 560 mm) J.Minimum swing radius 7 ft 8 in (2 340 mm) 9 ft 0 in (2 750 mm) 6 ft 8 in (2 030 mm) Arm digging force:Standard 13,900 lbf (62 kN) 12,600 lbf (56 kN) 15,700 lbf (70 kN) Power Boost 14,800 lbf (66 kN) 13,500 lbf (60 kN) 16,600 lbf (74 kN) Bucket digging force:Standard 20,200 lbf (90 kN) 20,200 lbf (90 kN) 20,200 lbf (90 kN) Power Boost 21,400 lbf (95 kN) 21,400 lbf (95 kN) 21,400 lbf (95 kN)8 ft 3 in (2.50 m) Arm Lift capacities calculated using a 880 lb (400 kg) bucket, 7,860 lb (3 570 kg) counterweight.9 ft 10 in (3.01 m) Arm Lift capacities calculated using a 750 lb (340 kg) bucket, 7,860 lb (3 570 kg) counterweight.Load (Lift Point Height)MINIMUM REACH 5 ft (1.5 m)10 ft (3 m)15 ft (4.5 m)20 ft (6 m)25 ft (7.5 m)MAXIMUM REACH@END SIDE ENDSIDEENDSIDEEND SIDE ENDSIDEENDSIDE@END SIDE +25 ft (7.5 m)11 ft 1 in (3.43 m)3,900 lb*(1 850 kg)*3,900 lb*(1 850 kg)*4,850 lb* (2 380 kg)*4,850 lb* (2 380 kg)*16 ft 8 in (5.24 m)2,950 lb*(1 310 kg)*2,950 lb*(1 310 kg)*+20 ft (6 m)12 ft 1 in (3.68 m)7,100 lb*(3 250 kg)*7,100 lb*(3 250 kg)*6,350 lb* (2 980 kg)*6,350 lb* (2 980 kg)*4,800 lb* (2 340 kg)*4,800 lb* (2 320 kg)21 ft 9 in (6.70 m)2,450 lb*(1 110 kg)*2,450 lb*(1 110 kg)*+15 ft (4.5 m)10 ft 7 in (3.18 m)8,050 lb*(3 680 kg)*8,050 lb*(3 680 kg)*8,050 lb*(3 710 kg)*7,850 lb* (3 640 kg)6,400 lb*(2 950 kg)*4,900 lb (2 280 kg)2,447 lb (1 110 kg)*2,447 lb (1 110 kg)*24 ft 7 in (7.52 m)2,350 lb*(1 050 kg)*2,350 lb*(1 050 kg)*+10 ft (3 m) 4 ft 10 in (1.53 m)16,300 lb*(6 850 kg)*16,300 lb*(6 850 kg)*28,250 lb* (12 814 kg)28,250 lb* (12 814 kg)15,650 lb*(7 270 kg)*14,550 lb (6 770 kg)11,450 lb*(5 280 kg)*7,550 lb (3 500 kg)7,450 lb (3 480 kg)4,700 lb (2 180 kg)4,500 lb* (2 320 kg)*3,100 lb (1 460 kg)26 ft 0 in (7.92 m)2,350 lb*(1 060 kg)*2,350 lb*(1 060 kg)*+5 ft (1.5 m)7 ft 1 in (2.15 m)8,050 lb*(3 620 kg)*8,050 lb*(3 620 kg)*21,350 lb*(9 820 kg)*13,200 lb (6 130 kg)11,550 lb (5 370 kg)7,000 lb (3 250 kg)7,200 lb (3 350 kg)4,450 lb (2 060 kg)5,000 lb (2 320 kg)3,000 lb (1 410 kg)26 ft 3 in (8.00 m)2,450 lb*(1 120 kg)*2,450 lb*(1 120 kg)*Groundline 4 ft 8 in (1.43 m)5,800 lb*(2 630 kg)*5,800 lb*(2 630 kg)*6,200 lb* (2 770 kg)*6,200 lb* (2 770 kg)*19,250 lb*(8 350 kg)*12,200 lb (5 680 kg)11,000 lb (5 130 kg)6,550 lb (3 050 kg)6,950 lb (3 230 kg)4,200 lb (1 960 kg)4,450 lb*(2 270 kg)2,950 lb (1 370 kg)25 ft 6 in (7.77 m)2,750 lb*(1 250 kg)*2,750 lb*(1 250 kg)*-5 ft (-1.5 m)0 ft 9 in (0.24 m)8,000 lb*(3 590 kg)*8,000 lb*(3 590 kg)*11,500 lb* (5 170 kg)*11,500 lb* (5 170 kg)*21,350 lb*(9 630 kg)*12,100 lb (5 640 kg)10,800 lb (5 030 kg)6,400 lb (2 960 kg)6,850 lb (3 180 kg)4,100 lb (1 910 kg)23 ft 8 in (7.22 m)3,350 lb*(1 510 kg)*3,200 lb (1 450 kg)-10 ft (-3 m) 1 ft 7 in (0.46 m)13,000 lb*(5 810 kg)*13,000 lb*(5 810 kg)*18,250 lb* (8 110 kg)*18,250 lb* (8 110 kg)*17,250 lb*(8 000 kg)*12,350 lb (5 740 kg)10,850 lb (5 050 kg)6,500 lb (3 010 kg)6,750 lb* (3 220 kg)4,250 lb (1 980 kg)20 ft 5 in (6.26 m)4,650 lb*(2 070 kg)*4,100 lb (1 830 kg)-15 ft (-4.5 m)6 ft 3 in (1.77 m)11,650 lb*(5 760 kg)*11,650 lb*(5 760 kg)*9,350 lb* (4 530 kg)*9,350 lb* (4 530 kg)*5,000 lb* (2 670 kg)*5,000 lb* (2 670 kg)*15 ft 1 in (4.69 m)4,700 lb*(2 220 kg)*4,700 lb*(2 220 kg)*Load (Lift Point Height)MINIMUM REACH 0 ft (0 m)5 ft (1.5 m)10 ft (3 m)15 ft (4.5 m)20 ft (6 m)25 ft (7.5 m)MAXIMUM REACH@ENDSIDE ENDSIDEENDSIDEENDSIDEENDSIDEENDSIDEENDSIDE@END SIDE +25 ft (7.5 m)12 ft 10 in (3.95 m)4,400 lb*(2 080 kg)*4,400 lb*(2 080 kg)*5,150 lb*(2 350 kg)*5,150 lb*(2 350 kg)*19 ft 1 in (5.96 m)2,850 lb*(1 280 kg)*2,850 lb*(1 280 kg)*+20 ft (6 m)13 ft 9 in (4.18 m)6,150 lb*(2 800 kg)*6,150 lb*(2 800 kg)*6,000 lb* (2 760 kg)*6,000 lb* (2 760 kg)*4,950 lb* (2 300 kg)*4,950 lb* (2 300 kg)*23 ft 7 in (7.25 m)2,500 lb*(1 120 kg)*2,500 lb*(1 120 kg)*+15 ft (4.5 m)12 ft 6 in (3.76 m)6,550 lb*(2 990 kg)*6,550 lb*(2 990 kg)*6,750 lb*(3 090 kg)*6,750 lb*(3 090 kg)*5,800 lb*(2 740 kg)*5,050 lb (2 350 kg)4,000 lb* (2 000 kg)*3,300 lb (1 540 kg)26 ft 2 in (8.00 m)2,400 lb*(1 080 kg)*2,400 lb*(1 080 kg)*+10 ft (3 m)7 ft 1 in (2.04 m)9,650 lb*(4 610 kg)*9,650 lb*(4 610 kg)*9,900 lb*(4 640 kg)*9,900 lb*(4 640 kg)*9,200 lb*(4 260 kg)*7,700 lb (3 580 kg)7,450 lb (3 470 kg)*4,800 lb (2 230 kg)5,200 lb (2 420 kg)3,200 lb (1 500 kg)27 ft 6 in (8.38 m)2,400 lb*(1 080 kg)*2,400 lb*(1 080 kg)*+5 ft (1.5 m) 6 ft 10 in (2.08 m)8,300 lb*(3 800 kg)*8,300 lb*(3 800 kg)*19,450 lb*(8 950 kg)*13,600 lb (6 320 kg)11,700 lb (5 450 kg)7,150 lb (3 320 kg)7,300 lb (3 380 kg)4,500 lb (2 090 kg)5,050 lb (2 350 kg)3,050 lb (1 430 kg)27 ft 9 in (8.46 m)2,500 lb*(1 150 kg)*2,500 lb (1 140 kg)Groundline 4 ft 4 in (1.32 m)5,650 lb*(2 560 kg)*5,650 lb*(2 560 kg)*6,350 lb* (2 840 kg)*6,350 lb* (2 840 kg)*22,300 lb*(9 660 kg)*12,300 lb (5 720 kg)*11,100 lb (5 160 kg)6,600 lb (3 070 kg)7,000 lb (3 250 kg)4,250 lb (1 970 kg)4,900 lb (2 280 kg)2,950 lb (1 370 kg)27 ft 1 in (8.24 m)2,800 lb*(1 270 kg)*2,550 lb (1 160 kg)-5 ft (-1.5 m)0 ft 0 in (0.00 m)8,650 lb*(3 900 kg)*8,650 lb*(3 900 kg)* (3 900 kg)* (3 900 kg)*10,550 lb* (4 730 kg)*10,550 lb* (4 730 kg)*21,600 lb*(9 440 kg)*11,900 lb (5 550 kg)*10,750 lb (5 000 kg)6,300 lb (2 930 kg)6,800 lb (3 170 kg)4,100 lb (1 900 kg)4,250 lb*(2 260 kg)2,900 lb (1 350 kg)25 ft 4 in (7.72 m)3,350 lb*(1 500 kg)*2,850 lb (1 290 kg)-10 ft (-3 m)0 ft 0 in (0.00 m)11,400 lb*(5 160 kg)*11,400 lb*(5 160 kg)* (5 160 kg)* (5 160 kg)*15,650 lb* (6 940 kg)*15,650 lb* (6 940 kg)*18,950 lb*(8 780 kg)*12,050 lb (5 620 kg)10,750 lb (5 010 kg)6,350 lb (2 950 kg)6,900 lb (3 190 kg)4,150 lb (1 920 kg)22 ft 4 in (6.84 m)4,400 lb*(1 970 kg)*3,500 lb (1 570 kg)-15 ft (-4.5 m)3 ft 3 in (0.91 m)18,950 lb*(8 240 kg)*18,950 lb*(8 240 kg)*19,350 lb* (9 240 kg)*19,350 lb* (9 240 kg)*12,550 lb* (5 950 kg)*12,150 lb (5 670 kg)8,200 lb* (3 960 kg)*6,550 lb (3 040 kg)17 ft 6 in (5.42 m)5,300 lb*(2 440 kg)*5,200 lb (2 290 kg)6 ft 11 in (2.11 m) Arm Lift capacities calculated using a 900 lb (410 kg) bucket, 7,860 lb (3 570 kg) counterweight.Load (Lift Point Height)MINIMUM REACH 5 ft (1.5 m)10 ft (3 m)15 ft (4.5 m)20 ft (6 m)25 ft (7.5 m)MAXIMUM REACH@END SIDE ENDSIDEEND SIDE END SIDE ENDSIDEENDSIDE@END SIDE +25 ft (7.5 m)9 ft 8 in (3.01 m)3,500 lb*(1 670 kg)*3,500 lb*(1 670 kg)*3,800 lb* (1 724 kg)3,800 lb* (1 724 kg)(1 990 kg)*(1 990 kg)*14 ft 7 in (4.63 m)3,650 lb*(1 620 kg)*3,650 lb*(1 620 kg)*+20 ft (6 m)10 ft 10 in (3.3 m)7,350 lb*(3 520 kg)*7,350 lb*(3 520 kg)*6,900 lb* (3 210 kg)*6,900 lb* (3 210 kg)*3,800 lb* (2 190 kg)*3,800 lb* (2 190 kg)*20 ft 4 in (6.26 m)3,000 lb*(1 350 kg)*3,000 lb*(1 350 kg)*+15 ft (4.5 m)8 ft 3 in (2.46 m)5,500 lb*(2 450 kg)*5,500 lb*(2 450 kg)*10,000 lb*(4 600 kg)*10,000 lb*(4 600 kg)*9,450 lb*(4 390 kg)*7,850 lb (3 640 kg)7,150 lb*(3 340 kg)*4,750 lb (2 220 kg)23 ft 4 in (7.14 m)2,800 lb*(1 260 kg)*2,800 lb*(1 260 kg)*+10 ft (3 m) 6 ft 3 in (1.94 m)14,450 lb*(6 550 kg)*14,450 lb*(6 550 kg)*17,400 lb*(8 050 kg)*14,350 lb (6 660 kg)11,850 lb (5 520 kg)7,350 lb (3 420 kg)7,350 lb (3 420 kg)4,550 lb (2 130 kg)3,594 lb (1 630 kg)*3,109 lb (1 410 kg)24 ft 10 in (7.57 m)2,800 lb*(1 260 kg)*2,800 lb*(1 260 kg)*+5 ft (1.5 m)8 ft 1 in (2.46 m)8,700 lb*(3 910 kg)*8,700 lb*(3 910 kg)*21,600 lb*(10 000 kg)*12,750 lb (5 910 kg)11,350 lb (5 280 kg)6,800 lb (3 170 kg)7,100 lb (3 290 kg)4,350 lb (2 010 kg)3,350 lb*(2 180 kg)*2,950 lb (1 370 kg)25 ft 1 in (7.65 m)2,950 lb*(1 330 kg)*2,900 lb (1 320 kg)Groundline 6 ft 2 in (1.87 m)6,750 lb*(3 050 kg)*6,750 lb*(3 050 kg)*12,450 lb* (5 600 kg)*12,450 lb* (5 600 kg)*17,600 lb*(7 640 kg)*11,950 lb (5 570 kg)10,900 lb (5 060 kg)6,450 lb (2 990 kg)6,850 lb (3 200 kg)4,150 lb (1 920 kg)24 ft 4 in (7.41 m)3,300 lb*(1 490 kg)*3,050 lb (1 370 kg)-5 ft (-1.5 m) 2 ft 1 in (0.63 m)8,850 lb*(3 970 kg)*8,850 lb*(3 970 kg)*18,750 lb* (8 340 kg)*18,750 lb* (8 340 kg)*20,300 lb*(9 350 kg)*12,050 lb (5 620 kg)10,750 lb (5 000 kg)6,350 lb (2 940 kg)6,800 lb (3 170 kg)4,100 lb (1 900 kg)22 ft 4 in (6.82 m)4,000 lb*(1 810 kg)*3,450 lb (1 570 kg)-10 ft (-3 m) 3 ft 0 in (0.89 m)15,850 lb*(7 030 kg)*15,850 lb*(7 030 kg)*15,400 lb*(7 170 kg)*12,300 lb (5 740 kg)10,600 lb* (4 980 kg)*6,500 lb (3 020 kg)18 ft 11 in (5.8 m)5,700 lb*(2 520 kg)*4,600 lb (2 050 kg)-15 ft (-4.5 m)9 ft 6 in (2.9 m)6,945 lb*(3 150 kg)*6,945 lb*(3 150 kg)*6,790 lb (3 080 kg)*6,790 lb (3 080 kg)*12 ft 5 in (3.79 m)4,982 lb (2 260 kg)*4,982 lb (2 260 kg)*NOTE: *Following number indicates hydraulic capacitySTANDARD EQUIPMENTIsuzu four-cylinder turbo-charged diesel Tier 4 Final – CEGR, DOC, SCR Electronic fuel injectionHigh pressure common rail system Diesel Oxidation Catalyst System (DOC) Neutral safety startAuto-engine warm upGlow-plug pre-heatEPF (Engine Protection Feature)Dual-stage fuel filtrationDual element air filterRemote oil filterGreen plug oil drain500-hour engine oil change interval24-volt systemRequires CJ-4 engine oilRequires ultra low-sulfur fuelEngine Idle/Fuel Economy System:Auto-idleOne-touch idleAuto-idle shut-downBEC – Boom Economy ControlAEC – Auto Economy ControlSWC – Swing Relief ControlSSC – Spool Stroke ControlAuto power boostAuto swing priorityAuto travel speed changeSelectable work modesISO pattern controlsPre-set auxiliary pump settings Auxiliary valve5,000-hour hydraulic oil change interval 1,000-hour hydraulic filter change interval SAHR brakeFree SwingControl Pattern Selector Right and left side mirrorsIsolation mounted cab (fluid and spring)Common key vandal locksUpper mounted work light (70 watt)Swivel guard belly panBoom – 15 ft 2 in (4.63 m)Arm – 8 ft 2 in (2.50 m)Heavy-duty bucket linkageBoom mounted work light (70 watt)Auxiliary pipe bracketsCentralized grease fittingsAttachment cushion valveFoldable hand railsArm and boom regenerationROPS protectionFOPS cab top guard (Level 1)Pressurized cabOne-touch lock front windowAC/heat/defrost with auto climate controlColor monitor – 7 in (180 mm)Interior dome lightAir-suspension seat (cloth)Seatbelt – 3 in (76 mm)Adjustable armrestsTilting consoles – 4-positionLow-effort joystick controlsSliding cockpit – 7 in (180 mm)Straight travelAM/FM Radio with Bluetooth, antennaand two speakersAux-in port for personal electronicsRear-view cameraAnti-theft system (start code system)Side view camera – rightRubber floormat12-volt electric outlet24-volt cigarette lighterExternal rearview mirrorsWindshield wiper/washerClear (polycarbonate) roof windowwith sunshadeCup holderStorage compartmentsOn-board diagnostic systemTravel alarm with cancel switchOne key start and lock-up23.6 in (600 mm) steel shoes,triple grouserFull overlap turntable bearing tubHydraulic track adjustmentX-pattern carbodyCASE SiteWatch™ Telematics – includeshardware and a 3-yr Advanceddata subscriptionOPTIONAL EQUIPMENTAuxiliary hydraulics:Single acting/joystick activated Double acting/joystick activated Multi-function/joystick activated Secondary low-flow/joystick activated Standard arm – 9 ft 11 in (3.01 m)Heavy-duty arm – 6 ft 10 in (2.11 m)Coupler/Case multi-pin grabberBuckets:Heavy-dutyExtreme-dutyLoad holding controlHose Burst Check Valve (HBCV)27.6 in (700 mm) steel shoes,triple semi-grouser20.0 in (500 mm) rubber shoesDouble track chain guidesFOPS cab top guard (Level 2)Front grill guard – 2 x 2 screen meshFront rock guard – vertical bars(two piece)/OPG 1Front rock guard – vertical bars(fixed/one piece)/OPG 2Vandal guardRain deflectorSun visorSide-view cameraRefueling pump©2017 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% post-consumer fiber.IMPORTANT: CASE Construction Equipment Inc. reserves the rightto change these specifications without notice and without incurringany obligation relating to such change. Availability of some modelsand equipment builds vary according to the country in which theequipment is used. The illustrations and text may include optionalequipment and accessories and may not include all standardequipment. Your CASE dealer/distributor will be able to give youdetails of the products and their specifications available in your area.CASE Construction Equipment is biodiesel-friendly. NOTE: All engines meet current EPAemissions regulations. All specifications arestated in accordance with SAE Standards orRecommended Practices, where applicable.Always read the Operator’s Manual beforeoperating any equipment. Inspect equipmentuse any safety features provided.Form No. CCE201705CX145DSR Replaces Form No. CCE201503CX145CSR。

挖掘机操作说明

6、松软地带或水中作业
在软土地带作业时，应了解土壤松实程度，并注意限制铲斗的挖掘范围，防止滑坡、塌方等事故发生以及车体沉陷较深。
在水中作业时，应注意车体容许的水深范围（水面应在托链轮中心以下）；如果水平面较高，回转支承内部将因水的进入导致润滑不良，发动机风扇叶片受水击打导致折损，电器线路元件由于水的侵入发生短路或断路。
8、平稳的操作方法
作业时，机器的稳定性不仅能提高工作效率，延长机器寿命，而且能确保操作安全（把机器放在较平坦的地面上）；驱动链轮在后侧比在前侧的稳定性好，且能够防止终传动遭受外力撞击；履带在地面上的轴距总是大于轮距，所以朝前工作稳定性好，要尽量避免侧向操作；要保持挖掘点靠近机器，以提高稳定性和挖掘机；假如挖掘点远离机器，造成因重心前移，作业就不稳定；侧向挖掘比正向挖掘稳定性差，如果挖掘点远离机体中心，机器会更加不稳定，因此挖掘点与机体中心应保持合适的距离，以使操作平衡、高效。
严禁边回转边破碎、锤头插入后扭转、水平或向上使用液压锤和将液压锤当凿子用。
1、操作技术
首先要确认周围状况。回转作业时，对周围障碍物、地形要做到心中有数，安全操作；作业时，要确认履带的前后方向，避免造成倾翻或撞击；尽量不要把终传动面对挖掘方向，否则容易损伤行走马达或软管；作业时，要保证左右履带与地面完全接触，提高整机的动态稳定性。
2、有效挖掘方法
当铲斗缸和连杆、斗杆缸和斗杆之间互成90度时，挖掘力最大；铲斗斗齿和地面保持30度角时，挖掘力最佳即切土阻力最小；用斗杆挖掘时，应保证斗杆角度范围在从前面45度角到后面30度之间。同时使用动臂和铲斗，能提高挖掘效率。
10、正确的行走操作
挖掘机行走时，应尽量收起工作装置并靠近机体中心，以保持稳定性；把终传动放在后面以保护终传动。

沃尔沃挖掘机说明书专业知识讲座

本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不
一当之、处，全请机联系基本人本或网参站数删除。
整机安装
整机构造
工作参数
部件参数
润滑容量
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。
3
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不
当之处二，请、联系驾本人驶或网室站删除。
左仪表盘
IECU （仪表电子控制
单元）空调控制面板, 发动
机启动
右仪表盘
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不
仪当表之处电，子请联控系制本单人或元网站(删IE除C。U)
D
空气滤清器堵塞警示指示器
空气预热指示器
液压油温警示指示器
液压油过滤器阻塞指示器
蓄电池充电警示指示器
快换接头指示器
过载警示指示器
增压指示器
浮动阀系统操作指示器
液压锤指示器
液压剪选择指示器
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。
IECU
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。
IECU
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。
IECU
本文档所提供的信息仅供参考之用，不能作为科学依据，请勿模仿。文档如有不当之处，请联系本人或网站删除。

沃尔沃挖掘机700说明书

保险丝容量和相关电路的符号
电气系统
编号 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
容量 10A 10A 20A 10A
10A 10A 20A 25A 25A 10A 15A 10A 5A 20A
装置/电路 I-ECU（仪表电子控制单元）
工作灯（后）工作灯（大臂）刮水器和清洗器
涡轮增压器
检查所有涡轮增压器的进气和排气接接口，以确保它们已拧紧，并处于正确的位置。
涡轮增压器在极高的温度下运行，因此，在维修时要格外小心。
涡轮增压器通过发动机润滑系统进行润滑和冷却。
确保涡轮发动机正常工作需要注意以下几个重点：
• 通过以下两种方式确保润滑和冷却：
– 启动发动机后不要立即加速。
– 在关闭发动机前要让其低怠速运转几分钟。
起动——气候炎热和寒冷时
气候寒冷时采取的措施
•确保冷却液的冰点与气候相适应。 •采用推荐的冬季专用润滑油。 •完成一天的工作后，灌满燃油箱，以防燃油箱中形成凝结水。 •发动机起动后，使其低速运转并轻载，直到发动机、液压系统中的油变热，并有更多的液体进行适当的润滑。
安全锁紧系统
操作机器
操作机器
附加的工作灯开关静音开关
行驶警示音停止开关左快换接头开关
过载警示开关座椅加热开关
发动机速度操纵开关起动开关
标准可选件
下部雨刮器开关
右侧仪表盘
工作灯开关最大功率模式选择器开关
自动怠速选择器开关行驶速度选择器开关增压/液压锤/液压剪选择器开关
右快换开关快速安装发声警告开关
重复循环空气传感器上部雨刮器开关喷水器开关

挖掘机型号参数大全[指南]

挖掘机型号参数大全质斗比是指挖掘机的质量与斗容之比。

这个值显示了挖掘机的效率和工艺水准，一般来说，这个值越低挖掘机就越有效率。

在同等质量情况下，这个值越低越好。

相反的这个值越高，就越说明挖掘机的无效质量就越多，效率就越差。

制造商1制造商型号整机质量(kg) 标准斗容(m3) 标准斗容(m9) 质斗比阿特拉斯Atlas 3306LC 31500 1.90 1.90 16579阿特拉斯Atlas 2606LC 25000 1.50 1.50 16667阿特拉斯Atlas 2006LC 18000 1.00 1.00 18000阿特拉斯Atlas 2306LC 22000 1.20 1.20 18333邦立重机Bonny CE400-6 40000 2.00 2.00 20000邦立重机Bonny CE650-6 66000 4.00 4.00 16500邦立重机Bonny CE1000-6 102000 6.00 6.00 17000邦立重机Bonny CE460-5 46000 2.50 2.50 18400邦立重机Bonny CE460-6 46000 2.50 2.50 18400邦立重机Bonny CE400-5 39000 2.00 2.00 19500邦立重机Bonny CE420-6 40000 1.80 1.80 22222邦立重机Bonny CE220-6 23000 1.00 1.00 23000斗山中国Doosan SL015 770 0.05 0.05 16383斗山中国Doosan SL018-VT 770 0.04 0.04 19250斗山中国Doosan DH225LC-7 21500 0.73~1.24 0.98 21939斗山中国Doosan DH300LC-7 29600 1.30 1.30 22769斗山中国Doosan DH258LC-7 24600 0.81~1.29 1.05 23429斗山中国Doosan DH370LC-7 37500 1.20-2.01 1.60 23438斗山中国Doosan SL035 2700 0.11 0.11 24545斗山中国Doosan DH500LC-7 46900 0.93-2.86 1.90 24684斗山中国Doosan DH220LC-7 21400 0.5~1.18 0.80 26750斗山中国Doosan DH150LC-7 13900 0.28-0.75 0.51 27255斗山中国Doosan DH80-7 7830 0.28 0.28 27964斗山中国Doosan DH55-5 5250 0.18 0.18 29830斗山中国Doosan DH300LC-7 29600 0.95 0.95 31158斗山中国Doosan DH35 3240 0.10 0.10 32400斗山中国Doosan DX300LC 29600 0.63~1.3 0.87 34023斗山中国Doosan DH60-7 5500 0.13~0.2 0.16 34375斗山中国Doosan DH420LC-7 41200 1.1.44~2.18 1.15 35826斗山中国Doosan SL030 2700 0.07 0.07 36986斗山中国Doosan SL010 770 0.02 0.02 38500斗山中国Doosan DH55GOLD 5250 0.09-0.175 0.13 40385福田雷沃LOVOL FR85-7 8500 0.36 0.36 23611福田雷沃LOVOL FR65-7 6200 0.22 0.22 28182福田雷沃LOVOL FR60-7 5730 0.20 0.20 28650福田雷沃LOVOL FR39-7 3960 0.12 0.12 33000福田雷沃LOVOL FR35-7 3980 0.12 0.12 33167福田雷沃LOVOL FR230 23000 0.3-1.4 0.85 27059福田雷沃LOVOL FR15-7 1500福田雷沃LOVOL FR80-7 8000福田雷沃LOVOL FR130-7 13000黄河Huanghe HXW230 22600 1.05 1.05 21524黄河Huanghe HXW220 22600 1.00 1.00 22600黄河Huanghe HXW310 30600 1.34 1.34 22836黄河Huanghe HXW230LC 23600 0.45 0.45 52444黄河Huanghe HXW400 42230黄河Huanghe PC300A 30000黄河Huanghe PC400A 40000久保田Kubota U-50-3S 5115 0.19 0.19 26921久保田Kubota U-35-3 3515 0.11 0.11 31955卡特彼勒Caterpillar 325C 26300 1.30 1.30 20231卡特彼勒Caterpillar 330C 33000 1.60 1.60 20625卡特彼勒Caterpillar 320C 19934 0.90 0.90 22149卡特彼勒Caterpillar 365C 85700力士德LISHIDE SC70.7 6800 0.28 0.28 24286力士德LISHIDE SC130-7 13000 0.53 0.53 24528力士德LISHIDE SC60.7 6000力士德LISHIDE SC210.7 10000力士德LISHIDE SC220SE.7 22600利勃海尔Liebherr 974B 84850 2.2-7 4.60 18446利勃海尔Liebherr 964B 65700 1.5-5.2 3.35 19612利勃海尔Liebherr 924B 26850 0.3-2.0 1.15 23348利勃海尔Liebherr 944B 38650 0.6-2.6 1.60 24156利勃海尔Liebherr 954C 52300 1.3-3 2.15 24326利勃海尔Liebherr 934B 31200 0.24-2.25 1.20 26000利勃海尔Liebherr 914B 24350 0.3-1.4 0.85 28647利勃海尔Liebherr 924Compact 24400 0.35-1.2 0.72 33889 利勃海尔Liebherr 904C 21100 0.15-1.05 0.60 35167利勃海尔Liebherr 317.00 18000 0.14-0.85 0.50 36000利勃海尔Liebherr 900C 19800 0.25-0.85 0.55 36000利勃海尔Liebherr A316 18300 0.28 0.28 65357利勃海尔Liebherr 313.00 15500利勃海尔Liebherr 984C 121800利勃海尔Liebherr 994.00 298250利勃海尔Liebherr 995.00 444000利勃海尔Liebherr 996.00 663500柳工Liugong CLG925LC 23250 1.10 1.10 21136柳工Liugong CLG922LG 20700 0.95 0.95 21789柳工Liugong CLG922LC 21000 0.95 0.95 22105柳工Liugong CLG923LC 22850 1.00 1.00 22850柳工Liugong CLG200-3 19800 0.80 0.80 24750柳工Liugong CLG907 7000 0.28 0.28 25000柳工Liugong CLG920C 20500 0.80 0.80 25625柳工Liugong CLG210 21000柳工Liugong CLG220 22000彭浦Pengpu SW330LC-3(5) 33700 1.80 1.80 18722 彭浦Pengpu SW330LC 33700 1.2-2 1.60 21063彭浦Pengpu SW130LC-8 33700 1.60 1.60 21063彭浦Pengpu SW130LC-7 23800 1.10 1.10 21636彭浦Pengpu SW230LC-5 23800 1.10 1.10 21636彭浦Pengpu SW220LC 23000 0.6-1.4 1.00 23000彭浦Pengpu SW210LC-5 21000 0.90 0.90 23333彭浦Pengpu SW130LC-6 21000 0.90 0.90 23333彭浦Pengpu SW200LC 20000 0.4-1.2 0.80 25000彭浦Pengpu SW130LC-5 13500 0.52 0.52 25962日立建机Hitachi ZX360LC 32600 1.62 1.62 20123 日立建机Hitachi ZX360LC 32800 1.62 1.62 20247 日立建机Hitachi ZX240LC 24300 1.20 1.20 20250 日立建机Hitachi ZX270 27000 1.30 1.30 20769日立建机Hitachi ZX250LC-3 25000 1.20 1.20 20833 日立建机Hitachi ZX70 6510 0.30 0.30 21700日立建机Hitachi ZX330 31000 1.40 1.40 22143日立建机Hitachi ZX210LC 20500 0.91 0.91 22527 日立建机Hitachi ZX200-3 19400 0.8/0.91 0.85 22824 日立建机Hitachi ZX230 23000 1.00 1.00 23000日立建机Hitachi ZX450H 43800 1.90 1.90 23053日立建机Hitachi ZX120 12200 0.52 0.52 23462日立建机Hitachi ZX470H-3 47100 1.90 1.90 24789 日立建机Hitachi ZX55UR 5380 0.20 0.20 26900日立建机Hitachi ZX130W 14800 0.52 0.52 28462日立建机Hitachi ZX160W 17300 0.52 0.52 33269日立建机Hitachi ZX330LC 31600 0.90 0.90 35111 日立建机Hitachi ZX180W 18800 0.51 0.51 36863日立建机Hitachi ZX210W 20600 0.51 0.51 40392日立建机Hitachi ZX130W 14900 0.19 0.19 78421日立建机Hitachi ZX470LCH(BE)-3 47000三一重机SA NY SY230C 23000 1.20 1.20 19167三一重机SA NY SY210C 20600 1.00 1.00 20600三一重机SA NY SY200C 19600 0.90 0.90 21778三一重机SA NY SY60C 5800 0.20 0.20 29000三一重机SA NY SY310C 29800 1.40 1.40 21286三一重机SA NY SY420C 41600 2.00 2.00 20800山河智能Sunward SW E130W 12300 0.51 0.51 24118 山河智能Sunward SW E 12600 0.52 0.52 24231山河智能Sunward SW E70 6600 0.26 0.26 25385山河智能Sunward SW E85 8250 0.28-0.4 0.32 25781山河智能Sunward SW E50 4680 0.18 0.18 26000山河智能Sunward SW E78 7650 0.28 0.28 27321山河智能Sunward SW E110 11800 0.42 0.42 28095山河智能Sunward SW E60 5950 0.21 0.21 28333山河智能Sunward SW E65 6300 0.22 0.22 28636山河智能Sunward SW E35UU 3600 0.11 0.11 32727山河智能Sunward SW E38su 3800 0.11 0.11 34545山河智能Sunward SW E85SU 8250 0.13-0.33 0.23 35870 山河智能Sunward SW E28su 3000 0.08 0.08 37500山河智能Sunward SW E08 880 0.02 0.02 40000山河智能Sunward SW E16 1600 0.04 0.04 40000山河智能Sunward SW E16S 1660 0.04 0.04 41500山河智能Sunward SW E17 1660 0.04 0.04 41500山河智能Sunward SW E15 1660 0.04 0.04 41500山河智能Sunward SW E28UU 2800山河智能Sunward SW E55 5500神钢Kobelco SK210LC-8 20100 1.00 1.00 20100神钢Kobelco SK250LC-6 24700 1.20 1.20 20583神钢Kobelco SK350LC-8 34700 1.60 1.60 21688神钢Kobelco SK70SR 6700 0.28 0.28 23929神钢Kobelco SK230LC-6 24100 1.00 1.00 24100神钢Kobelco SK330-8 33800 1.40 1.40 24143神钢Kobelco SK200-8 19700 0.80 0.80 24625神钢Kobelco SK55SR 5260 0.21 0.21 25048神钢Kobelco SK450 47100 1.80 1.80 26167神钢Kobelco SK115SR 11800 0.45 0.45 26222神钢Kobelco SK135SR 13400 0.50 0.50 26800神钢Kobelco SK35SR 3840 0.11 0.11 34909沃尔沃V olvo EC700BLC 70000 4.00 4.00 17500沃尔沃V olvo EC360BLC 38000 1.90 1.90 20000沃尔沃V olvo EC240BLC 25000 1.25 1.25 20000沃尔沃V olvo EC210BLC 22000 1.10 1.10 20000沃尔沃V olvo EC290BLC 30000 1.40 1.40 21429沃尔沃V olvo EW200B 20000 0.92 0.92 21739沃尔沃V olvo EC460BLC 46000 2.10 2.10 21905沃尔沃V olvo EW145B 14000 0.60 0.60 23333沃尔沃V olvo EC140BLC 14000 0.52 0.52 26923 沃尔沃V olvo EC55B 5500 0.18 0.18 30556沃尔沃V olvo ECR88 8500现代Hyundai R455LC-7 44900 2.15 2.15 20884 现代Hyundai R260LC-7 25200 1.20 1.20 21000 现代Hyundai R450LC-5 43530 2.07 2.07 21029 现代Hyundai R225LC-7 22100 1.05 1.05 21048 现代Hyundai R305LC-7 29400 1.38 1.38 21304 现代Hyundai R210W-5 20050 0.92 0.92 21793现代Hyundai R375LC-7 36100 1.62 1.62 22284 现代Hyundai R245-7 24600 1.10 1.10 22364现代Hyundai R215-7C 20700 0.92 0.92 22500现代Hyundai R215-7 20700 0.92 0.92 22500现代Hyundai R370LC-7 36500 1.62 1.62 22531 现代Hyundai R335LC-7 32200 1.38 1.38 23333 现代Hyundai R190LC-5 18100 0.76 0.76 23816 现代Hyundai R110-7 11200 0.45 0.45 24889现代Hyundai R60W-5 5250 0.21 0.21 25000现代Hyundai R130W-5 12900 0.51 0.51 25294现代Hyundai R170LC-5 16600 0.65 0.65 25538 现代Hyundai R130LC-5 13800 0.51 0.51 27059 现代Hyundai R60W-7 5750 0.21 0.21 27381现代Hyundai R80-7 7800 0.28 0.28 27857现代Hyundai R60-7 5850 0.21 0.21 27857现代Hyundai R265LC-7 26500现代Hyundai R55-7 5500现代Hyundai R150W-7 15000现代Hyundai R210W-7 21000现代Hyundai R55-7 5500现代Hyundai R150LC-7 15000小松Komatsu PC220LC-7 24200 1.20 1.20 20167 小松Komatsu PC270-7 27350 1.30 1.30 21038小松Komatsu PC210LC-7 21200 1.00 1.00 21200 小松Komatsu PC210-7 19800 0.90 0.90 22000小松Komatsu PC360-7 31200 1.40 1.40 22286小松Komatsu PC300-7 31200 1.40 1.40 22286小松Komatsu PC60-7 6300 0.28 0.28 22500小松Komatsu PW130ES-6 15110 0.20-1.14 0.67 22552 小松Komatsu PC220-7 22900 1.00 1.00 22900小松Komatsu PC400-6 41400 1.80 1.80 23000小松Komatsu PC60-7 6460 0.28 0.28 23071小松Komatsu PC130-7 12600 0.53 0.53 23774小松Komatsu PW150ES-6 16490 0.20-1.14 0.67 24612 小松Komatsu PC200-7 19700 0.80 0.80 24625小松Komatsu PC55MR-2 5420 0.20 0.20 27100小松Komatsu PC50MR-2 54200 0.20 0.20 271000小松Komatsu PC35MR-2 39200 0.11 0.11 356364徐挖XCG XCG240LC-8 23600 1.20 1.20 19667徐挖XCG XCG240LC-7E 23600 1.15 1.15 20522徐挖XCG XCG240LC-7E 23600 1.15 1.15 20522徐挖XCG XCG230LC-7A 22800 1.10 1.10 20727徐挖XCG XCG230LC-7B 22800 1.10 1.10 20727徐挖XCG XCG230LC-7C 22800 1.10 1.10 20727徐挖XCG XCG230LC-8 22950 1.10 1.10 20864徐挖XCG XCG220LC-7B 22400 1.00 1.00 22400徐挖XCG XCG220LC-7A 22400 1.00 1.00 22400徐挖XCG XCG220LC-7B 22400 1.00 1.00 22400徐挖XCG XCG330LC-7 32700 1.45 1.45 22552徐挖XCG XCG210LC-7E 20600 0.90 0.90 22889徐挖XCG XCG210LC-8 20600 0.90 0.90 22889徐挖XCG XCG200-7A 19700 0.80 0.80 24625徐挖XCG XCG200-7E 19700 0.80 0.80 24625徐挖XCG XCG200-8 19700 0.80 0.80 24625徐挖XCG XCG88-7 8800 0.32 0.32 27500徐挖XCG XCG88-8 8800 0.32 0.32 27500徐挖XCG XCG60-7 5850 0.21 0.21 27857徐挖XCG XCG60-8 5990 0.21 0.21 28524玉柴Y uchai Yc18-3 1880 0.10 0.10 18800玉柴Y uchai YC135 13100 0.52 0.52 25192玉柴Y uchai YC85-5 8100 0.32 0.32 25313玉柴Y uchai YC85-3 8100 0.32 0.32 25313玉柴Y uchai Yc65-2 6700 0.24 0.24 27917玉柴Y uchai YC65-3 6700 0.24 0.24 27917玉柴Y uchai Yc55-2 5710 0.20 0.20 28550玉柴Y uchai Yc45-2 4460 0.15 0.15 29733玉柴Y uchai YC13-6 1500 0.05 0.05 30000玉柴Y uchai YC35-7 3740 0.12 0.12 31167玉柴Y uchai YC35-6 3740 0.12 0.12 31167玉柴Y uchai YC15 1500玉柴Y uchai YC25 2500玉柴Y uchai YC30 3000詹阳动力Jonyang JYL135C 13500 0.60 0.60 22500 詹阳动力Jonyang JYL210E 21000 0.90 0.90 23333 詹阳动力Jonyang JYL80 8000 0.35 0.35 22857詹阳动力Jonyang JY230E 23000詹阳动力Jonyang JY230LC-6 23000詹阳动力Jonyang JY210E 21000詹阳动力Jonyang JY210E 21000詹阳动力Jonyang JY35 3500詹阳动力Jonyang JY400E 40000 1.60 1.60 25000 詹阳动力Jonyang JY400E 40000詹阳动力Jonyang JYT200 20000詹阳动力Jonyang JYL210X 21000众友Zhongyou 805C 4300 0.30 0.30 14333众友Zhongyou 805B 4200 0.25 0.25 16800众友Zhongyou 913B 12500 0.65 0.65 19231众友Zhongyou 913C 12800 0.65 0.65 19692众友Zhongyou 912A 12500 0.60 0.60 20833众友Zhongyou 913A 12900 0.60 0.60 21500众友Zhongyou JCM907 7100 0.32 0.32 22188众友Zhongyou 923B 24500 1.10 1.10 22273众友Zhongyou 923C 24500 1.10 1.10 22273众友Zhongyou 921C 20500 0.90 0.90 22778众友Zhongyou 907.00 6700 0.28 0.28 23929众友Zhongyou 808.00 8100 0.32 0.32 25313竹内Takuechi TB150 4825 0.20 0.20 24125竹内Takuechi TB1140 14230 0.50 0.50 28460竹内Takuechi TB1140 14230 0.50 0.50 28460竹内Takuechi TB140 3430 0.12 0.12 28583竹内Takuechi TB180FR 7900 0.25 0.25 32245竹内Takuechi TB153FR 5200 0.14 0.14 36879竹内Takuechi TB014 1410 0.04 0.04 37105竹内Takuechi TB125 2675 0.07 0.07 38214竹内Takuechi TB016 1500 0.04 0.04 39474竹内Takuechi TB20R 2600 0.06 0.06 40625竹内Takuechi TB28FR 3010 0.07 0.07 44265竹内Takuechi TB108 855 0.02 0.02 47500住友Sumitomo SH240 24300 0.8--1.5 1.15 21130住友Sumitomo SH240-3 23300 0.8--1.5 1.10 21182住友Sumitomo SH330-3 33000 1.2--1.8 1.50 22000住友Sumitomo SH330LC-3 33600 1.2--1.8 1.50 22400 住友Sumitomo SH450HD-3 45000 1.8--2.0 1.90 23684 住友Sumitomo SH200-3 19100 0.5--1.1 0.80 23875住友Sumitomo SH200LC-3 19500 0.5--1.1 0.80 24375 住友Sumitomo SH800LHD-3 78400 2.4--4.1 3.20 24500 住友Sumitomo SH210 19900 0.5--1.1 0.80 24875住友Sumitomo SH350HD-3 35200 1.4--1.6 1.40 25143 住友Sumitomo SH200HD-3 20400 0.80 0.80 25500住友Sumitomo SH120-3 12000 0.24-0.65 0.45 26667住友Sumitomo SH75X-3 7090 0.11--0.34 0.23 30826住友Sumitomo SH400-3 43600 1.4--2.2 1.30 33538山东卡特 CT40-7A 3900 0.14-0.18 0.16 24375山东卡特 CT40-6 3900 0.14-0.19 0.165 23636山东卡特 CT15-7B 1760 0.04-0.1m3 0.052 33846山东卡特 CT18-7B 1760 0.05-0.1m3 0.075 23467山东卡特 CT45-7A 4200 0.17m3 0.17 24706山东卡特 CT60-6A 5900 0.20m3 0.2 29500山东卡特 CT80-7A 8300 0.32~0.38m3 0.35 23714山东卡特 CT85-7A 8300 0.36~0.4m3 0.38 21842小桥工程 ks35 3320 0.11 0.11 30182小桥工程 ks45 4550 0.16 0.16 28438小桥工程 ks200 19600 0.8 0.8 24500山东福临 W YL120C轮式挖掘机12000 0.5 0.5 24000山东福临 W YL-80 轮式挖掘机12000 0.5 0.5 24000山东福临 W YL-80c履带式式挖掘机12000 0.5 0.5 24000 山东福临 W YL-80d 履带式挖掘机12000 0.5 0.5 24000 山东福临 W YL-5.0轮式挖掘机5000 0.15 0.15 33333。

进口沃尔沃柴油发动机挖掘机产品性能说明书

驾驶室
8个位置可调，适应不同体型操作手
Volvo Construction Equipment
驾驶室
宽阔的视野
Volvo Construction Equipment
驾驶室
Volvo Construction Equipment
驾驶室
内部加压，13个出风口，超强加热制冷能力
Volvo Construction Equipment
物有所值
• 标准配置LC车架 • Volvo电控直喷柴油发动机 • 标准配置了斗杆、动臂、回转优先系统 • 标准配置了斗杆、动臂保持阀 • 回转摆动防止阀 • 标准配置了多路阀备用阀（破碎锤等） • 标准配置了自动加油机 • 三套控制电脑 • 自动恒温驶室空调 • 钢板布式硬度达到400的高耐磨岩石铲斗 • 标准配置了所有辅助阀 • 众多优化设计（集中润滑、快速换油、防滑板）
挖掘装置
同行业布氏硬度最高钢板，大截面设计机器人焊接而
Volvo Construction Equipment
挖掘装置
标准装备重载型大臂，小臂，岩石型铲斗
Volvo Construction Equipment
挖掘装置
油缸行程长，工作范围
同行业最大铲斗回转角
Volvo Construction Equipment
Volvo Construction Equipment
宁波日兴动力科技有限公司
Volvo Construction Equipment
Volvo Construction Equipment
EC55B
EC140BLC
EC210BLC
EC240BLC
EC290BLC
EC700BLC

沃尔沃建筑设备 EC750E挖掘机说明书

EC750E Volvo Excavators 72.8-74.9 t 523 hp2Volvo Trucks Renault TrucksA passionfor performanceAt Volvo Construction Equipment, we’re not just coming along for the ride. Developing products and services that raise productivity – we are confident we can lower costs and increase profits for industry experts. Part of the Volvo Group, we are passionate about innovative solutions to help you work smarter – not harder.Helping you to do more.Doing more with less is a trademark of Volvo Construction Equipment. High productivity has long been married to low energy consumption, ease of use and durability. When it comes to lowering life-cycle costs, Volvo is in a class of its own.Designed to fit your needs.There is a lot riding on creating solutions that are suited to the particular needs of different industry applications. Innovation often involves high technology – but it doesn’t always have to. Some of our best ideas have been simple, based on a clear and deep understanding of our customers’ working lives.You learn a lot in 180 years.Over the years, Volvo has advanced solutions that have revolutionized the use of construction equipment. No other name speaks Safety louder than Volvo. Protecting operators, those around them and minimizing our environmental impact are traditional values that continue to shape our product design philosophy.We’re on your side.We back the Volvo brand with the best people. Volvo is truly a global enterprise, one that is on standby to support customers quickly and efficiently – wherever they are.We have a passion for performance.3Mack Trucks UD Trucks Volvo BusesVolvo ConstructionEquipmentVolvo Penta Volvo Financial Services4Do more for lessGain more profitability and productivity in the EC750E. The Volvo crawler excavator offers the perfect combination of power and stability to handle a higher capacity in the toughest applications. Industry-leading fuel efficiency, innovative electro-hydraulic technology and ECO Mode help to optimize production and maximize your return on investment.Total controlFor a more productive and fuel efficient operation, the new electro-hydraulic system puts superior control in the operator’s hands. Utilizing intelligent technology, the easy-to-use system controls on-demand flow and reduces internal losses in the hydraulic circuit.Operator’s choiceTake on the most demanding working environments from thecomfort of Volvo’s industry-leading cab. The low noise cab provides ample storage and leg room, 12 air-conditioner vents and adjustable seat, keeping the operator fresh, alert and focused – longer.Ergonomically positioned interfaces – including the joysticks, keypad and LCD monitor – and clear all-around visibility helps you share the strong, work-all-day feeling your machine has.Outstanding fuel efficiencyAchieve outstanding fuel efficiency with Volvo’s unique ECO Mode. ECO Mode optimizes the hydraulic system to reduce loss of flow and pressure – resulting in improved fuel efficiency without any loss of performance in most operating conditions.5Rely on a superior performance from the EC750E to do the bigger jobs better, stronger and faster. Equipped with a powerful Volvo D16 engine, the machine utilizes advanced technology built on decades of experience, delivering increased horsepower and fuel efficiency – that benefits your bottom line.Powered by Volvo6Get the job done in even the most demanding conditions with the EC750E’s outstanding digging force. Powered by Volvo’s advanced electro-hydraulic technology, the EC750E digs, swings and loads more materials in any application.Superior digging performance7 Winning performanceNo task is too tough for the powerful EC750E. Whether you’re working at a mine, a quarry or in heavy construction applications, the EC750E offers superior digging performance, outstanding fuel efficiency and quick cycle times for a maximum return on investment.The right mode for the jobAchieve optimum fuel efficiency and machine performance withVolvo’s unique, integrated work mode system. Maximizing efficiency,the system allows operators to choose the best work mode for thetask at hand - select from I (Idle), F (Fine), G (General), H (Heavy)and P (Power max).Designed for distanceDelivering more power, better productivity and ease of movingaround your jobsite, the machine’s high system pressure and durabletrack ensure impressive tractive force when climbing gradients andtravelling over unstable ground. Experience superior access to hard-to-reach areas of your job site.Get more done in less timeCut cycle times to a minimum and increase profitability with thenewly developed fully electro-hydraulic system. The Volvo hydraulicsystem in combination with the high power and massive torque fromthe Volvo D16 engine gets more done in less time. Offering fastercycle times, the EC750E ensures greater control, reduces operationcosts and maximizes uptime.Solid stabilityOperators can work with confidence in challenging environmentswith outstanding stability in the EC750E. Operate adverse terrainsin the well-balanced and solid machine, which features a widetrack gauge, long track length, a retractable undercarriage, and anoptimized counterweight.8Built to work for youAlways available and ready for any application, the durable EC750E is designedfor maximum uptime. The machine’s heavy-duty design, reliable and wear-resistant components, and easy service access ensure you will get the job done quickly and without delay.Proven reliabilityCount on a solid, reliable EC750E with Volvo’s high-qualitycomponents, designed to work in perfect harmony with themachine. Volvo’s commitment to rigorous testing in its developmentprocess ensures the production of well-engineered components,purpose-built for the job, and proven to be reliable in the toughestapplications.Durable by designAchieve non-stop production with the durable and reliable EC750E.Built with protected components, including a strong frame structure,the machine can be relied on for longevity and sustained uptime indemanding applications. A built-in, heavy-duty plate is featured foradditional protection to the underside of the machine.Easy service accessMaximize uptime with quick and safer servicing. Essentialmaintenance points are easily accessed via the wide-openingand conveniently located compartment doors using central andsurrounding walkways.Robust protectionFor added safety and durability, optional FOG (Falling ObjectGuard) and FOPS (Falling Object Protective Structure) certifiedcabs provide peace-of-mind for working in tough applications. TheEC750E can also be fitted with a full length track guard for addedprotection.9Maximize machine uptime and performance for any job application with the reinforced heavy duty boom and arm built from high strength tensile steel. Designed for maximum reliability in even the most severe conditions, steel strips are welded under the arm for added protection and various boom and arm configurations are available to suit any bucket size or application.Boom and arm10Volvo’s attachments have been purpose-built to work in perfect coordination with Volvo machines, forming one solid, reliable unit. With functions and properties ideally matched, Volvo attachments are an integrated part of the excavator for which they’re intended – delivering maximum productivity.Genuinely VolvoRobust attachments to match With a Volvo excavator crawler and a Volvo attachment you simply get more done. Thanks to Volvo’s wide range of attachments, including the durable and hardworking general purpose, heavy duty and extreme-duty buckets, you can get the most out of your machine. Easily tailor the EC750E exactly for the applications and the conditions of your worksite.Heavy-duty and extreme-duty bucketsVolvo’s heavy-duty and extreme-duty buckets are built using wear resistant plates, excel at digging compact materials including loose rock, hard clay and gravel. They are perfect for quarrying and mining applications and are made of reinforced high quality durable materials for a long life and superior performance. Custom made buckets are available in some regions – consult your dealer.Hydraulic breakerThe EC750E can be equipped with a Volvo hydraulic breaker built to break even most demanding materials. With consistent power and high breaking force you’ll benefit from maximum impact and durability. Set your Volvo breaker at the right frequency to suit your application needs.Genuine Volvo teeth, cutters and edgesVolvo buckets are built with high tensile steel to increase the bucket’s durability, and they are available from the factory* with a wide range of teeth, side cutters, segments, and wear shrouds to protect the bucket and prolongs its lifespan in the harshest working conditions. *Attachments are available for loose order in some regions, contact you dealer for more information.Attachment management systemThe password protected attachment management system allows storage for up to 20 different attachments. The system allowsthe operator to pre-set hydraulic flow and pressure inside the cab through the monitor, which ensures the use of various attachments, for increased versatility.Up to the challengeWith functions and properties ideally matched, Volvoattachments are an integrated part of the excavator for which they’re intended – delivering maximum productivity.Genuinely VolvoMaximize machine uptime and performance for any job application with the reinforced heavy duty boom and arm.The EC750E features superior digging force, particularly when working with hard and heavy materials.Superior digging performanceAttachment management system The password protected attachment management system allows storage for 20 different attachments for added versatility.Genuine Volvo teeth, cutters and edgesVolvo buckets are available from the factory with a wide range of parts to prolong its lifespan in the harshest working conditions.Total controlThe electro-hydraulic system controls on-demand flow and reduces internal losses in the hydraulic circuit.Rely on a top performance from the EC750E, featuring a powerful Volvo D16 engine for a fast and efficient operation.Powered by VolvoCustomer Support Agreements offer preventive maintenance, total repairs and a number of uptime services.Customer Support AgreementsDurable by designBuilt with protected components, the EC750E can be relied on for longevity and sustained uptime.Proven reliabilityCount on Volvo’s high-quality components, designed to work in perfect harmony with your machine.Solid stabilityStable in challengingenvironments, its quality, reliable performance and durability is everything you expect from a Volvo.Get more done in less time Cut cycle times to a minimum with the newly developed fully electro-hydraulic system.Operator’s choiceThe comfortable cab and ease of operation, even in adverse conditions, makes operators choose this machine.AdBlue®Volvo offers a total AdBlue solution that is quality assured, cost efficient and easily accessible. Contact your Volvo dealer for more information.® = registered trademark of the Verband der Automobilindustrie e.V. (VDA)Complete SolutionsVolvo has the right solution for you. So why not let us provide all your needs throughout the whole life cycleof your machine? By listening to your requirements, we can reduce your total cost of ownership and increase your revenue.Genuine Volvo PartsOur attention to detail is what makes us stand out. This proven concept acts as a solid investment in your machine’sfuture. Parts are extensively tested and approved because every part is vital for uptime and performance. Only by using Genuine Volvo Parts, can you be sure that your machine retains the renowned Volvo quality. Service NetworkIn order to respond to your needs faster, a Volvo expert is on the way to your job site from one of our Volvo facilities.With our extensive infrastructure of technicians, workshops and dealers, Volvo has a comprehensive network to fully support you using local knowledge and global experience.Adding value to your businessBeing a Volvo customer means having a complete set of services at your fingertips. Volvo can offer you a long-term partnership, protect your revenue and provide a full range of customer solutions using high quality parts, delivered by passionate people. Volvo is committed to increasing the positive return on your investment and maximising uptime.Customer Support AgreementsThe range of Customer Support Agreements offer preventive maintenance, total repairs and a number of uptime services. Volvo uses the latest technology to monitor machine operation and status, giving you advice to increase your profitability. By having aCustomer Support Agreement you are in control of your service costs.EC750E in detailThe recommendations are given as a guide only, based on typical operation conditions.DIMENSIONSDIMENSIONSSpecificationsLIFTING CAPACITY EC750ELifting capacity at the arm end without bucket. For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards.3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.LIFTING CAPACITY EC750ELifting capacity at the arm end without bucket. For lifting capacity including bucket, simply subtract actual weight of the direct fit bucket or the bucket with quick2. The above loads are in compliance with SAE J1097 and ISO 10567 Hydraulic Excavator Lifting Capacity Standards.3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.4. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.21Equipment2223 Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice.The illustrations do not necessarily show the standard version of the machine.Bucket conflux Dual stage oil bath pre-cleanerOne piece fixed windshieldRef. No 20050599_B / English-21 / 2016.09 / EXC / Volvo, Global Marketing。

沃尔沃汽车使用手册说明书

RACE Newsletter09/04/2018CAR:NEW : FLASH_0675 VOLVO BOSCH EDC17CP22/CP48/CP68 CANATTENTION!In order to run the writing procedure with the serial protocol flash_0675 it is necessary to perform first the PATCH UNLOCK with the New Trasdata - plugin 158 / 681 / 743.Please check the specific manual.VOLVO C30 Mk2/C70/S40/V50 Mk2/V40 Mk2-3 2.0L 16V D3 110kW EDC17CP22/CP48VOLVO C30 Mk2/V60 2.4L 20V D5 132kW EDC17CP22/CP48VOLVO C70/ S60 Mk2/V60/XC60 2.0L 20V D3 120kW EDC17CP22/CP48VOLVO S60 Mk2/XC70 Mk3/S80Mk3/V60/V70 Mk3/XC60/XC70 Mk3 2.4L 20V D5 158kW EDC17CP22/CP48VOLVO S80 Mk2/V70 Mk3/XC60 2.4L 20V D5 151kW EDC17CP22VOLVO V50 Mk2 2.0L 20V D5 130kW EDC17CP22VOLVO V70 Mk3 2.4L 20V D5 130kW EDC17CP22VOLVO X C60 2.4L 20V D4 120-129kW EDC17CP22VOLVO X C70 Mk3/XC60/ XC70 Mk3/XC90/V60 2.4L 20V D5 120kW EDC17CP22/CP48/CP68VOLVO S60 Mk2/V60/V70 Mk3 2.0L 20V D3 100kW EDC17CP48VOLVO S80 Mk3/V60/V70 Mk3/XC70 Mk3 2.0L 16V D4 120kW EDC17CP48VOLVO S80 Mk3 2.4L 20V D4 120kW EDC17CP48VOLVO V40 Mk3 2.0L 16V D4 130kW EDC17CP48VOLVO V60 2.4L 20V D6 HYBRID 158kW EDC17CP48 VOLVO X C60 2.0L 20V D5 100kW EDC17CP48VOLVO X C60/XC70 Mk3 2.4L 20V D4 133kW EDC17CP48VOLVO X C60 2.4L 20V D4 140kW EDC17CP68VOLVO X C70 Mk3 2.4L 20V D5 133kW EDC17CP68VOLVO X C70 Mk3 2.4L 20V D5 162kW EDC17CP68NEW : FLASH_0676 MERCEDES DELPHI CRD3.E/P CANATTENTION!In order to run the writing procedure with the serial protocol flash_0676 it is necessary to perform first the PATCH UNLOCK with the New Trasdata - plugin 935.Please check the specific manual.MERCEDES A CLASS W176 A200 2.2L 16V CDI 100kW CRD3.E/PMERCEDES A CLASS W176 A220 2.2L 16V CDI 130kW CRD3.E/PMERCEDES B CLASS W246 B200 2.2L 16V CDI 100kW CRD3.E/PMERCEDES C CLASS W205 C220 2.2L 16V CDI 100-120-125kW CRD3.E/PMERCEDES C CLASS W205 C250 2.2L 16V CDI 152kW CRD3.E/PMERCEDES CLA CLASS C117 CLA200 2.2L 16V CDI 100kW CRD3.E/PMERCEDES CLA CLASS C117 CLA220 2.2L 16V CDI 130kW CRD3.E/PMERCEDES GLA CLASS X156 GLA200 2.2L 16V CDI 100kW CRD3.E/PMERCEDES GLA CLASS X156 GLA220 2.2L 16V CDI 130kW CRD3.E/PMERCEDES SPRINTER W906 316-516 2.2L CDI 105-120kW CRD3.E/PTRUCK:NEW: FLASH_0677 CUMMINS – TEREX ATLAS TRUCK CM570 CANTEREX TRUCKS TA300 10.8L QSM 276kW CM570TRACTOR:NEW: FLASH_0674 CUMMINS – TIGERCAT TRACTOR CM2250 CANTIGERCAT FELLER BUNCHERS 724E 6.7L QSB 164kW CM2250SW : 3.0.186 DLL : 1.0.197 FW: 12.09 build 0002 MOTOROLA MPC500 CPUs:ADD : 01 - MOTOROLA MPC500BOSCH EDC7C1 MPC555/MPC556 INTERNATIONAL DieselNEW - plugin 1037 – INTERNATIONAL BUS 3100 4.8L 110kW EDC7C1 STMICROELECTRONICS CPUs:ADD : 02 - STMICROELECTRONICS ST10BOSCH DCU15 ST10C167 DAF AdBlue DCUNEW - plugin 1032 – FENDT 300 VARIO 313 4.4L 99kWINFINEON TRICORE CPUs:ADD : 03 - INFINEON TRICORE NO PSW CANLINEBOSCH REXROTH SRC 9-34 TC1796 AGCO GEARBOX CVTNEW – plugin 951 – AGCO GEARBOX CVTBOSCH ME17.9.71 TC1724 PSA PetrolNEW – plugin 1035 – PEUGEOT 206 1.6L 16V 82kW ME17.9.71BOSCH ME17.2.4/BMS-MP TC1791/TC1793 BMW MOTORRAD PetrolNEW – plugin 1057 – BMW MOTORRAD S SERIES S 1000 R my2017 1.0L 121kW ME17.2.4BMW MOTORRAD S SERIES S 1000 RR my2017 1.0L 146kW ME17.2.4BMW MOTORRAD S SERIES S 1000 XR my2017 1.0L 121kW ME17.2.4BMW MOTORRAD F SERIES F 800 R/GT my2017 1.0L 66kW ME17.2.4BMW MOTORRAD R SERIES R 1200 GS my2017 1.0L 92kW ME17.2.4BOSCH MEVD17.8.4 TC1797 BMW PetrolNEW – plugin 1065 – BMW 3 SERIES F30/F31/F35 320i 2.0L L4 16V TURBO 135kW MEVD17.8.4BMW 5 SERIES F10/F11/F18 520i 2.0L L4 16V TURBO 135kW MEVD17.8.4BMW 5 SERIES F10/F11/F18 525i 2.0L L4 16V TURBO 160kW MEVD17.8.4ADD : 04 - INFINEON TRICORE BOSCH MEDC17 TPROT2/4/7BOSCH MED17.0.7 TC1782 FORD PetrolNEW – plugin 1064 – FORD FIESTA 7 1.0L 12V Ecoboost 74kW MED17.0.7ADD: 23 - INFINEON TRICORE BOSCH MEDC17 GPT VAGBOSCH ME17.5.22 TC1724 VAG PetrolNEW – plugin 1039 – VOLKSWAGEN GOLF 7 1.6L 8V MPI 81kW ME17.5.22VOLKSWAGEN GRAN LAVIDA 1.6L 8V MPI 81kW ME17.5.22VOLKSWAGEN POLO 5 (6R, 6C) 1.6L 8V MPI 81kW ME17.5.22VOLKSWAGEN TOURAN 1.6L 8V MPI 81kW ME17.5.22SKODA OCTAVIA (5E) 1.6L 8V MPI 81kW ME17.5.22ADD: 28 - INFINEON TRICORE BOSCH MEDC17 GPT FORDBOSCH EDC17CP05 TC1797 FORD DieselNEW – plugin 1042 – FORD F250 6.7L V8 32V TD SUPERDUTY 287kW EDC17CP05FORD F350 6.7L V8 32V TD SUPERDUTY 224kW EDC17CP05FORD F250/F350 6.7L V8 32V TD SUPERDUTY 298kW EDC17CP05FORD F250/F350 6.7L V8 32V TD SUPERDUTY 328kW EDC17CP05Important: F34NTA15 flat cable is required to operate in GPT modeNEW: 61 - INFINEON TRICORE BOSCH EDC17 TPROT13 VM MOTORIBOSCH EDC17C49 TC1797 AEBI-SCHMIDT DieselNEW – plugin 1070 – AEBI-SCHMIDT MT750 4.5L V6 115kW EDC17C49ADD: 46 - INFINEON TRICORE CONTINENTAL ACM_MCM MEB TRUCK CAN LINETEMIC ACM2.1/AT25256 TC1796 ACM MERCEDES TRUCKNEW – plugin 1029 – ACM MERCEDES TRUCKWARNING: in order to communicate with this ECU ACM2.1/AT25256 using the plugin 1029 it is required the new cable F34NTA20F34NTA20ADD: 46 - INFINEON TRICORE CONTINENTAL ACM_MCM MEB TRUCK CAN LINECONTINENTAL-SIEMENS-VDO HDEP MCM2.1 TC1797 MERCEDES TRUCK E6 DieselNEW – plugin 1030 – MERCEDES TRUCK EURO6PONSEE FORWARDERS EURO6CLAAS JAGUAR EURO6FENDT KATANA 65 EURO6WARNING: in order to communicate with this ECU HDEP MCM2.1 using the plugin 1030 it is required the new cable F34NTA19F34NTA19ADD: 50 - INFINEON TRICORE SIEMENS SSM VAGCONTINENTAL-SIEMENS-VDO Simos18.X TC1791_384/TC1793_384 VAG PetrolNEW – plugin 830 –AUDI A1 (8X) 1.8L 16V TFSI 141kW SIMOS18.XAUDI A3 (8V) 1.8L 16V TFSI 132kW SIMOS18.XAUDI A3 (8V) 2.0L 16V TFSI 162kW SIMOS18.XAUDI A4 (B8-B9) 2.0L 16V TFSI 132-140-165-185kW SIMOS18.XAUDI A5 (8F/8T) 2.0L 16V TFSI 165kW SIMOS18.XAUDI A6 (C7) 1.8L 16V TFSI 140kW SIMOS18.XAUDI A6 (C7) 2.0L 16V TFSI 183-185kW SIMOS18.XAUDI A7 (4G) 1.8L 16V TFSI 140kW SIMOS18.XAUDI A7 (4G) 2.0L 16V TFSI 140-162-183-185kW SIMOS18.XAUDI Q3 (8U) 2.0L 16V TFSI 132-162kW SIMOS18.XAUDI Q5 (8RB) 2.0L 16V TFSI 132-162kW SIMOS18.XAUDI Q7 (4M) 2.0L 16V TFSI 185kW SIMOS18.XAUDI S1 (8X) 2.0L 16V TFSI 170kW SIMOS18.XAUDI S3 (8V) 2.0L 16V TFSI 205-210-220kW SIMOS18.XAUDI TT (FV) 1.8L 16V TFSI 132kW SIMOS18.XAUDI TT (FV) 2.0L 16V TFSI 161-169-210-228kW SIMOS18.XSEAT LEON (5F) 1.8L 16V TSI-TFSI 132kW SIMOS18.XSEAT LEON (5F) 2.0L 16V TSI CUPRA 195kW SIMOS18.XSKODA OCTAVIA (5E) 1.8L 16V TSI-TFSI 132kW SIMOS18.XSKODA OCTAVIA (5E) 2.0L 16V TSI RS-GTI 162-169kW SIMOS18.XSKODA SUPERB (3V) 1.8L 16V TSI-TFSI 132kW SIMOS18.XVOLKSWAGEN EOS (1F8) 2.0L 16V TFSI 162kW SIMOS18.XVOLKSWAGEN BEETLE (A5)/JETTA 6-7 1.8L 16V TFSI 125kW SIMOS18.XVOLKSWAGEN BEETLE (A5)/JETTA 6 2.0L 16V TFSI 154-155-162kW SIMOS18.XVOLKSWAGEN GOLF 7 1.8L 16V TFSI 132kW SIMOS18.XVOLKSWAGEN GOLF 7 2.0L 16V TFSI 162-205kW SIMOS18.XVOLKSWAGEN GOLF 7 2.0L 16V GTI 155-162-169-194kW SIMOS18.XVOLKSWAGEN GOLF 7 2.0L 16V R 213-220kW SIMOS18.XVOLKSWAGEN LAMANDO 1.8L 16V TSI 132kW SIMOS18.XVOLKSWAGEN LAMANDO 2.0L 16V TFSI 161kW SIMOS18.XVOLKSWAGEN PASSAT (B7-B8-B9) 1.8L 16V TFSI 125-132kW SIMOS18.XVOLKSWAGEN PASSAT (B8-B9) 2.0L 16V TFSI 162kW SIMOS18.XVOLKSWAGEN POLO (6C) 1.8L 16V TSI-GTI 141kW SIMOS18.XVOLKSWAGEN SCIROCCO 3 2.0L 16V TFSI-GTS-WRC 132-162kW SIMOS18.XVOLKSWAGEN TOURAN 1.8L 16V TSI 132kW SIMOS18.XPORSCHE MACAN (95B) 2.0L 16V TFSI 185kW SIMOS18.XCONTINENTAL-SIEMENS-VDO Simos12.X TC1797 VAG PetrolNEW – plugin 1067 –AUDI A3 (8V-8P) 1.8L 16V FSI-TFSI 162kW SIMOS12.XAUDI A4 (B8) 1.8L 16V TFSI 125kW SIMOS12.XAUDI A4 (B8) 2.0L 16V TFSI 165kW SIMOS12.XAUDI A5 (8F/8T) 1.8L 16V TFSI 106-125-130kW SIMOS12.XAUDI A5 (8F/8T) 2.0L 16V TFSI 165-169kW SIMOS12.XAUDI A7 (4G) 2.0L 16V TFSI 165kW SIMOS12.XAUDI Q5 (8RB) 2.0L 16V TFSI 132-165-169kW SIMOS12.XAUDI S3 (8P) 2.0L 16V TFSI 205-210-220kW SIMOS12.XAUDI TT (8J) 1.8L 16V FSI 162kW SIMOS12.XAUDI TT (FV) 1.8L 16V TSI 162kW SIMOS12.XAUDI TT (8J) 2.0L 16V TFSI 210-228kW SIMOS12.XImportant: F34NTA18 flat cable is required to operate in SSM modeMOTOROLA MPC55XX CPUs:ADD : 06 - MOTOROLA MPC55XX JTAGCONTINENTAL-SIEMENS-VDO CM2250 MPC5566 PETERBILT DieselNEW – plugin 1028 – PETERBILT 386 15.0L ISX15 298kW CM2250ADD : 43 - MOTOROLA MPC55XX BAMCONTINENTAL-SIEMENS-VDO MPC5534 ACM VOLVONEW – plugin 1041 – VOLVO WHEEL LOADERS ACMRENESAS SH7050 CPUs:ADD : 07 - RENESAS SH7050DELPHI DCM3.7AP SH72543R CASE/DOOSAN/NEW HOLLAND DieselNEW - plugin 1034 – CASE FARMALL 55 C CVT 2.2L 39.5kW DCM3.7APMITSUBISHI MH7XXX/MH8XXX CPUs:ADD : 08 – MITSUBISHI MH7XXX/8XXXMITSUBISHI F8T86571 MH8115F YAMAHA PetrolNEW – plugin 1033 – YAMAHA ATV WOLVERINE X4 0.85L 50kW F8T86571MITSUBISHI E6T32xxx MH8102F MITSUBISHI PetrolNEW – plugin 1038 – MITSUBISHI PAJERO V60 3.5L V6 24V 150kW E6T32xxxMITSUBISHI 33920-98J80 MH8115F SUZUKI PetrolNEW – plugin 1040 – SUZUKI MARINE DF 300 3.6L V6 220kW 33920-98J80NEC CPUs:ADD : 36 - NEC NBDDENSO 270536-6941 NEC 76F0040GD TOYOTA PetrolNEW - plugin 1031 – TOYOTA RAV4 (A2) 2.0L 16V 4L 110kW 270536-6941DENSO 275036-7581 NEC 76F0085 TOYOTA PetrolNEW - plugin 1068 – TOYOTA HILUX/VIGO (AN120-AN130) 2.7L 16V L4 VVT-i DOHC FLEX 120kW 275036-7581 FREESCALE ST MPC56XX SPC56X CPUs:ADD : 37 – FREESCALE ST MPC56XX SPC56XCONTINENTAL-SIEMENS-VDO CM2350 MPC5674F GENERIC CUMMINS ENGINE DieselNEW – plugin 638 – GENERIC CUMMINS ENGINE CM2350AGENERIC CUMMINS ENGINE CM2350BDelphi DCM6.2AP MPC5674F HYUNDAI DieselNEW – plugin 1024 – HYUNDAI i20 Mk2 1.1L 12V CRDi 55kW DCM6.2APKIA RIO/K2 (YB) 1.1L 12V CRDi 55kW DCM6.2APADD : 44 – FREESCALE MPC56XX BAMDelphi DCM6.2AP MPC5674F HYUNDAI DieselNEW - plugin 1063 – HYUNDAI i20 Mk2 1.1L CRDi 55kW DCK6.2APKIA RIO/K2 (YB) 1.1L 12V CRDi 55kW DCM6.2APNEW PLUG-IN LISTPLGID ECU Brand ECU Model Brand Connection Type Micro Flash Ext Category638 Continental-Siemens-VDO CM2350Generic CumminsEngine37 - FREESCALE/STMPC56XX/SPC56X JTAG MPC5674F TRUCK830 Continental SIMOS18.x VAG 50 - INFINEON TRICORE SIEMENSSSM VAG TC1791_384/TC1793_384 CAR951 BOSCH REXROTH SRC 9-34 GEARBOXCVT AGCO03 - INFINEON TRICORE NO PSWCANLINE TC1796 M58BW032FB TRACTOR1024 Delphi DCM6.2AP Hyundai 37 - FREESCALE/STMPC56XX/SPC56X JTAG MPC5674F CAR1028 Continental-Siemens-VDO CM2250 Peterbilt 06 - MOTOROLA MPC5500 JTAG MPC5566 TRUCK1029 Temic ACM2.1/AT25256 MEB Truck 46 - INFINEON TRICORE TEMIC MCMACM MERCEDES OBD TC1796 TRUCK1030 Continental-Siemens-VDO HDEP MCM2.1 MEB Truck46 - INFINEON TRICORE TEMIC MCMACM MERCEDES OBD TC1797 TRUCK1031 Denso 275036-6941 Toyota 36 - NEC NBD 76F0040GD CAR 1032 Bosch DCU15 DAF 02 - STMICROELECTRONICS ST10 ST10C167 AM29F400BT TRUCK 1033 Mitsubishi F8T86571 Yamaha 08 - MITSUBISHI MH7XXX/MH8XXX MH8115F BIKE1034 Delphi DCM3.7AP Case/Doosan/NewHolland 07 - RENESAS SH7050 SH72543RTRUCKTRACTOR1035 Bosch ME17.9.71 PSA 03 - INFINEON TRICORE NO PSWCANLINE TC1724 CAR1037 Bosch EDC7C1 International 01 - MOTOROLA MPC500 MPC555/MPC556 TRUCK 1038 Mitsubishi E6T32xxx Mitsubishi 08 - MITSUBISHI MH7XXX/MH8XXX MH8102F CAR1039 Bosch ME17.5.22 VAG 23 - INFINEON TRICORE BOSCHMEDC17 GPT VAG TC1724 CAR1040 Mitsubishi 33920-98J80 Suzuki 08 - MITSUBISHI MH7XXX/MH8XXX MH8102F MARINE1041 Continental-Siemens-VDO ACM Volvo 43 - MOTOROLA MPC55XX BAM MPC5534 TRUCK1042 Bosch EDC17CP05 Ford 28 - INFINEON TRICORE BOSCHMEDC17 GPT FORD TC1797 CAR1057 BOSCH ME17.2.4/BMS-MP BMW 03 - INFINEON TRICORE NO PSWCANLINE TC1791/TC1793 BIKE1063 Delphi DCM6.2AP Hyundai 44 - FREESCALE MPC56XX BAM MPC5674F CAR1064 Bosch MED17.0.7 Ford 04 - INFINEON TRICORE BOSCHMEDC17 TPROT2/4/7 TC1782 CAR1065 Bosch MEVD17.8.4 BMW 03 - INFINEON TRICORE NO PSWCANLINE TC1797 CAR1067 Continental SIMOS12.x VAG 50 - INFINEON TRICORE SIEMENSSSM VAG TC1797 CAR1068 Denso 275036-7581 Toyota 36 - NEC NBD 76F0085 CAR1070 BOSCH EDC17C49 AEBI SCMIDT 61 – INFINEON TRICORE BOSCHEDC17 TPROT13 VM MOTORI TC1797 TRUCKDIMSPORT S.r.l.。

Volvo Trucks FL FE操作手册说明书

Volvo Trucks.Driving ProgressInformación de servicioInformación de producto sobre camiones Volvo,para personal de servicios de emergenciaFL FEPrólogoLas descripciones y los procedimientos de servicio se basan en diseños y en estudios demétodos realizados hasta septiembre2012.Los productos son desarrollados continuamente.Para los vehículos y componentes fabricados luego de la fecha mencionada,pueden por lo tanto corresponder especificaciones y métodos de reparación distintos.Cuando se considere que ello pesa significativamente para el manual presente,se publicaráuna versión actualizada del mismo que incluya los cambios.En la próxima edición del manual estas modificaciones quedan actualizadas.En las instrucciones en donde hay incluido el número de operación en el rubro,tan solo se trata de una referencia al tarifario VST(Volvo Standard Times).Las instrucciones sin número de operación en el rubro son solamente una información general y no hacen referencia a VST.En esta información de servicio se utilizan los siguientes niveles en observación y advertencia. Nota:Indica un método,práctica o condición que debe ser seguido para que la función del vehículo o componente sea realizada en la forma apropiada.Precaución:Indica un procedimiento que no es seguro y que puede acarrear daños al producto.Advertencia:Indica un procedimiento que no es seguro y que puede acarrear heridas al personal o graves daños al producto.Peligro:Indica un procedimiento que no es seguro y que puede causar heridas graves al personal e incluso la muerte.Volvo Truck CorporationGöteborg,SwedenNúmero de pedido:89073870©2012Volvo Truck Corporation,Göteborg,SwedenInformación de productos-FE,FL Información de producto sobre servicios de emergencia de Volvo TrucksContenido•“Introducción”,página2•“Cabina”,página3•“Sistema eléctrico”,página4•“Habitáculo del conductor”,página7•“Ajuste del volante”,página7•“Sistema SCR”,página9IntroducciónT1008650 La finalidad de este documento es proporcionar informaciónsobre productos de tipo técnico,que pueda usarse para es-tablecer rutinas y métodos para actuaciones de salvamentoen accidentes de tráfico donde se haya visto involucrado uncamión Volvo.El presente documento se destina a los Equipos de salva-mento locales,responsables de actuaciones de salvamentoen el lugar del accidente.El documento contiene la siguienteinformación:•Cabina del conductor•Sistema eléctrico•Puesto de conducción y ajustes del volante•SRS/sistema de airbag•Sistema SCRCabinaLas cabinas antiguas están fabricadas en chapa de acero de materiales blandos unidos por soldadura.Por su lado,los modelos de cabina más modernos están fabricados en acero de alta resistencia.A continuación presentamos un dibujo esquemático de la es-tructura de cabina,donde las zonas de chapa de alta resis-tencia se han marcado de color gris claro y gris oscuro.Refuerzo decabinaC8063199Sistema eléctrico Recomendaciones generales:Hay dos tipos de interruptores para cortar la corriente eléc-trica del vehículo.Son el interruptor principal y el disyun-tor de ADR.Interruptor principal•El interruptor de suministro principal sólo funciona cuan-do el motor estádesconectado.NO corta la alimentación del tacógrafo,el sistema de cierre centralizado,la alarma Despuésde usarDisyuntor de ADR•En vehículos que transportan mercancías peligrosas de-be haber siempre un disyuntor de ADR.Cuando se usa este disyuntor se corta todo el sumi-nistro eléctrico independientemente de si el motor¡Advertencia!para desconectar Nota!Solamente la desconexión desde la batería o con el disyuntor de ADR corta TODO el suministro eléctrico.•Cuando se ha desconectado la alimentación de batería, se guarda energía en la unidad de mando de SRS duran-te unos segundos,tiempo suficiente para activar el air-bag o el tensor de cinturón de seguridad.Para asegurar que el sistema estádesenergizado,esperar unos3se-gundos después de desconectar la alimentación de labatería.•Antes de desconectar la corriente:¡Considerar la po-sible necesidad de abrir puertas o mover el asiento del conductor!(Ver:“Habitáculo del conductor”,página 7Si el asiento del conductor es ajustable eléctricamente,no seráposible ajustarlo después de cortar la electricidad porque el asiento no tiene mandos mecánicos.•La apariencia y la función varían entre diferentes inte-rruptores principales.Algunos modelos de camión care-cen de interruptor principal.¿Cómo se desconecta la corriente?•Desconectar el interruptor principal.No se desconec-tan todos los circuitos del camión;algunas partes especí-ficas del vehículo permanecen energizadas.No todas lascabinas tienen interruptor principal.•Interrumpir el circuito de batería soltando/cortando elcable de los bornes de batería.Ésta es la forma más se-gura de interrumpir la tensión.Se interrumpe toda la ten-sión,incluso del tacógrafo.Tener en cuenta que el vehículo sigue estando energiza-do si sólo se quita la llave de contacto.Con respecto aSRS,permanece energía almacenada en la unidad de man-do de SRS durante unos segundos después de cortarse elsuministro.Esta energía es suficiente para activar el airbag yel tensor de cinturón de seguridad durante hasta tres segun-dos después de cortar el suministro.La cifra indica la posición normal de la batería.1Caja de baterías de montaje lateral.Se puede montar en el lado izquierdo o derecho.2Caja de baterías de montaje posterior.T3072656Diferentes formas de cortar el suministro eléctrico:D.Interruptor principal telemandado.No existe en todos los vehículos.Pulsando el botón izquierdo dos veces dentro de cinco segundos,se desconecta el interruptor principal.Algunos circuitos permanecenenergizados.T301-7347C.Disyuntor de ADR.Sólo existe en vehículos que trans-portan mercancías peligrosas.Desconecta TODA lacorriente.C8063014B.Interruptor principal/interruptor de batería.Se encuentra en todos los vehículos.Algunos circuitos siguen excitados.A.Batería.Cuando se interrumpe el circuito de batería,empezar con el borne nega-tivo.Si es necesario cortar,hacerlo lo más cerca posible de la batería para reducir el riesgo de conexiones junto a los cables principales.Nota!¡Atención!No todos los componentes de la figura arri-ba están en todos los vehículos.Sistema de cierre centralizadoEl sistema de cierre centralizado se inmoviliza interrumpien-do el circuito de batería.En vehículos para transporte de mercancías peligrosas,el cierre centralizado también se in-moviliza desde el interruptor principal.Las puertas bloqueadas se pueden abrir desde el interior usando la empuñadura de apertura.Habitáculo del conductorDiseño del asientoExisten varios modelos de asiento para los diferentes mode-los de camión.El ajuste de posición de asiento vuelto atrás y adelante es en algunos casos mecánicos,pero los modelos más avanza-dos tienen ajuste eléctrico.Los modelos con ajuste mecánico se ajustan con una empu-ñadura situada debajo de la parte frontal del cojín de asiento,y los que tienen ajuste eléctrico se ajustan con un botón si-tuado en el lado izquierdo del asiento.Nota:los asientos con ajuste eléctrico no tienen sistema de ajuste mecánico.Para más información,ver:“Sistema eléctrico”,página 4Ajuste de asiento en sentidolongitudinalT8010409T8010449Ajuste con horquilla.Ajuste eléctrico.Ajuste del volanteHay un botón de operación neumática o una palanca mecá-nica en la columna de dirección.Cuando es necesario cortar o aserrar en el volante,la mane-ra más fácil es hacerlo en las zonas marcadas en blanco de acuerdo a la figura de abajo.El resto de las secciones están reforzadas.Perfil de refuerzo del volante y ajuste delvolanteT0013497T6009538Ajuste del volante.Cortar el volante.Sistema SCRRecomendaciones generales:•Cuando se para el motor,la solución de urea es bombea-da de vuelta al depósito de urea y se vacía la solución de urea del sistema SCR.Este proceso tarda unos dos minu-tos.Si se usa el interruptor de ADR para cortar la corrien-te antes de terminarse este proceso,el sistema puedeseguir estando presurizado y contener de solución deSi se usacuando•La urea es muy corrosiva y puede dañar conectores.Si la urea entra en contacto con conectores desenchufados, hay que cambiarlos de inmediato.No sirve de nada lim-piar porque la solución de urea se dispersa rápidamente en el cable,causando oxidación del metal.El derrameevaporaciónLas zonasen vehículosSistema SCREl sistema de urea es la parte del sistema de postratamientode los gases de escape que tienen algunos motores nuevospara cumplir con los requisitos de emisiones de Euro 4.Se inyecta una solución de urea en los gases de escape an-tes de que atraviesen el catalizador,para reducir las emisio-nes de óxidos de nitrógeno en los gases de escape.Los componentes principales del sistema SCR son:de-pósito de urea,unidad de bomba,unidad dosificadora y silenciador con catalizador incorporado.Sinopsis del sistema SCR y sus componentesprincipales:T20229851.Depósito de urea2.Unidad de bomba3.Unidad dosificadora4.SilenciadorSolución de ureaLa solución de urea,formada por agua destilada y un 32,5%de urea,es un líquido incoloro que puede tener un suaveolor a amoniaco.La solución de urea puede ser agresiva contra determinadosmateriales y se debe manipular con cuidado.La solución no es inflamable.A temperaturas altas la solución de urea se descompone enamoniaco y dióxido de carbono,y a temperaturas inferioresa –11°C la solución se puede congelar.La solución de urea es corrosiva a los metales,especialmen-te el cobre y el aluminio.Manipulación de la solución de urea:En caso de contacto con la piel:enjuague bien con agua tibia y quítese las prendas contaminadas.En caso de contacto con los ojos:enjuague bien con agua durante varios minutos y acuda a unmédico en caso necesario.En caso de inhalación:respire aire fresco y acuda a un médico en caso necesario. En caso de ingestión:beba agua89073870Spanish1.05Edición01 Volvo Truck Corporation。

VOLVO使用说明书

VOLVO系列柴油发电机组使用说明书常州顺风发电设备有限公司一、概述我公司生产的VOLVO系列柴油发电机组采用瑞典国原装VOLVO柴油发动机为原动机，配套国内外先进的发电机(根据用户要求)以及本厂自行设计的控制柜组装而成。

它具有结构紧凑、性能先进、运行可靠、使用方便等特点。

本系列发电机组有公用底盘、原动机、发电机、控制屏等组成。

具有体积小、功率大、移动方便等特点，是邮电、通讯、铁道车辆与工矿照明最理想的备用应急电源，也是野外作业部门最理想的工作能源。

用户在详读本说明书的同时，必须阅读有关原动机、发电机等单独说明书。

以便能更好地、更全面地了解该机组的综合性能，以及维护、保养知识，确保机组的正常使用和安全运行。

二、机组的主要技术参数1) 电源种类交流2) 额定电压380/220V3) 额定频率50Hz4) 额定转速1500转/分5) 励磁方式无刷自励6) 功率因数0.8(滞后)7) 海拔高度1000m8) 环境温度+5℃～+40℃9) 空气相对湿度不大于60% （25℃时）10) 无导电尘埃及腐蚀性气体的场合。

11) 无爆炸危险的场所，无振动、颠簸、垂直斜度不超过5℃的场所，无日晒、雨淋的场所。

三、机组的使用1. 使用前的准备（1）将机组安置在平坦的屋内场地，屋内通风应保持良好，排风排气应保证充足。

（2）保持机组整洁无污垢。

（3）检查机油的牌号是否与柴油机说明书规定的相同。

检查机油油位，如不足应加足，并按说明书规定周期更换机油。

（4）检查冷却液液位是否到位，如液位不足，应用与原来相同的冷却液加足。

（5）检查机组的燃油系统是否漏油，燃油是否充足等。

（6）检查蓄电池是否充足，接线是否正确、牢固。

（7）检查仪表是否完好，电气接线是否牢固。

主开关是否处于断开状态。

（8）长期存放的机组，使用前应检查电气回路是否受潮。

用500兆欧表测量电气回路的绝缘电阻,不得低于2兆欧，否则应采取烘干措施。

（9）检查金属部分的接地是否牢靠。

Volvo Trucks FH Globetrotter XXL 产品说明书

La cabina Volvo FH Globetrotter XXL, FH-XHES5, es una cabina dormitorio con altura y longitud extra diseñada para transporte de larga distancia, nacional e internacional.La cabina ofrece un nivel de comodidad muy elevado con una posición de conducción ideal, asientos de diseño anatómico, bajo nivel de ruido, sistema de control de climatización de alta capacidad y un nivel de seguridad de primera clase. Su alturainterior es de 220 cm (211 cm sobre el túnel del motor).La cabina Globetrotter XXL, FH-XHES5, se ha diseñado aerodinámicamente con superficies lisas y esquinas redon-deadas en el frontal. El parabrisas está ligado a la estructura de la cabina, lo que reduce el ruido del viento y aumenta la protección en caso de colisión. El techo solar, o escotilla de techo, no solo se utiliza para ventilación, sino también como salida de emergencia.El interior de la cabina ha sido diseñado pensando en el conductor.La cabina dispone de un interior moderno con materiales duraderos y de fácil mantenimiento. Se ha puesto mucha atención para elegir materiales que reduzcan al mínimo las emisiones de gases de los elementos interiores, así como el riesgo de alergias por contacto. La cabina también ofrece un generoso espacio de almacenamiento.La cabina se ha sometido a pruebas de impacto y se ha • La total seguridad de la cabina protege al conductor.• Diseño exterior de cabina aerodinámico que contribuye al ahorro de combustible y a una mayor rentabilidad.• Acceso cómodo con escalones iluminadosy antideslizantes.• Amplio ángulo de apertura de la puerta y volante inclinable para facilitar el acceso a la cabina.• Interior muy espacioso, con un avanzado sistema de climatización.• Cómodo espacio de descanso para una o dos personas. La litera superior está disponible como opción.• La litera inferior presenta 250 mm adicionales de anchoy 130 mm adicionales de largo, lo que aporta una comodidad superior para dormir.• La litera inferior incluye una almohadilla suave en la parte superior de cada muelle, para adaptarse a la forma del cuerpo y ofrecer un alto nivel de comodidad. CARACTERÍSTICAS Y VENTAJASdiseñado para evitar lesiones, con materiales que absorben la energía del impacto. Los paneles de la cabina están fabricados en metal galvanizado, que proporciona una buena protección básica contra la corrosión.Acceso bajo y cómodoLa entrada a la cabina Volvo es baja, con tres escalones an-tideslizantes de color oscuro fabricados en plástico robusto que ofrecen una solución resistente al desgaste. Las sólidas inserciones de aluminio endurecido firmemente fijadas a los escalones de plástico están disponibles como opción.La puerta se abre con un ángulo de 75° y hace que la entrada a la cabina resulte más cómoda. Hay asideros resistentes de metal (opcionalmente recubiertos de cuero) a ambos lados de la abertura de la puerta, lo que hace que la entrada sea aún más cómoda y segura.Asientos de diseño ergonómicoLos asientos se han diseñado de forma ergonómica con un eficaz soporte lateral y cuentan con una gran variedad de espe-cificaciones (suspensión neumática, ventilación en el asiento, calefacción, etc.). El asiento del conductor está disponible con una amplia variedad de ajustes que hacen que sea más fácil encontrar una cómoda posición de conducción.Volante ajustable para una posición de conducciónóptimaEl ángulo y la altura de la columna de dirección, al igual que la inclinación del volante, se pueden ajustar con un pedal situado a la izquierda de la columna de dirección. El rango de ajuste de altura es de 90 mm y el rango del ángulo de inclinación de la columna es de 28°. El ángulo de inclinación del volante es de 20°. El volante se encuentra disponible con o sin airbag. Los mandos integrados en el volante ofrecen un uso cómodo y seguro del programador de velocidad, de las funciones de radio y teléfono, y de los menús del panel de instrumentos y la pantalla secundaria.Instrumentación sencillaÉste disfruta de una amplia visión sobre el salpicadero, que ha sido diseñado para garantizar que el conductor disponga de la información adecuada en cada situación. Los instrumentos de la cabina tienen un diseño lógico, con mandos cómodos y fáciles de usar. El conductor recibe información a través de dos claras pantallas situadas en el cuadro de instrumentos: una pantalla de instrumentos delante del conductor y una pan-talla secundaria en la parte central del panel de instrumentos (opcional). El servicio Dynafleet, el sistema de navegación y el sistema de audio están completamente integrados en la instrumentación (opcional).Perfecta visibilidadEl conductor tiene una excelente visibilidad en todas las direc-ciones gracias al amplio parabrisas, a los retrovisores de gran tamaño y a los espejos de proximidad delanteros y del lado del acompañante. Las carcasas de los espejos son ultrafinas, por lo que ofrecen una amplia área de visión con un ángulo muerto mínimo. El ángulo muerto de la esquina delantera se puede ver en la pantalla secundaria a través de una cámara adicional en el lado del pasajero (FROM-P S, opción), colocada en el soporte del espejo del lado del pasajero. El salpicadero tiene inclinación hacia el parabrisas mejorando así la visibilidad en las proximidades.Los eficaces faros principales proporcionan un haz de luz concentrado de largo alcance. Los faros LED y los faros LED con luces adaptativas se ofrecen como opción.Interior funcional con amplio espacio de almacenamiento El espacio situado encima del parabrisas presenta tres com-partimentos guardaobjetos grandes y uno más pequeño. El gran compartimento guardaobjetos de los extremos cuenta con puertas enrollables, mientras que el compartimento central lleva una tapa. Los parasoles están integrados en los comparti-mentos guardaobjetos situados sobre el parabrisas. El parasol se puede controlar de forma manual o eléctrica.El panel de instrumentos cuenta con un sujetavasos y pe-queños compartimentos de almacenamiento. En la zona de descanso, hay cuatro grandes espacios de almacenamiento y, encima de las puertas, dos prácticos compartimentos guardaobjetos. Debajo de la litera, hay grandes habitáculos de almacenamiento con espacio para una nevera (opcional). Las unidades de almacenamiento inferiores situadas en los laterales, bajo la cama, presentan 50 litros adicionales en cada una de ellas y son accesibles tanto por dentro como por fuera.Litera inferior reclinable. Nota: El color del acabado interior de la imagen no es correcto. Consulte la hoja de datos de tapicería para obtener información sobre el color del acabado interior.Zona de descanso cómoda y adaptableLa cabina puede equiparse con una litera fija o reclinable y una litera superior opcional. La litera inferior es firme e incluye una almohadilla en la parte superior de cada muelle, lo que aporta una comodidad superior para dormir.El detector de humos instalado en la pared lateral (lado del conductor) se incluye de serie.Entorno de trabajo agradable climatizadoEl aislamiento de la cabina reduce las pérdidas de temperatura en climas fríos y cálidos, y ayuda a mantener una temperatura confortable para el conductor. También reduce el nivel de ruido en la cabina durante el trabajo y el tiempo de descanso.El sistema de climatización está completamente integrado en el sistema de ventilación del camión. Esto significa que se distribuirá aire caliente o frío de forma uniforme en la cabina. Hay tres posibles sistemas de climatización alternativos:– Aire acondicionado con regulación manual.– Climatizador con regulación automática de temperatura.– C limatizador con regulación automática de temperatura y control de la calidad del aire.El sistema de climatización también se puede complementar con un sistema totalmente integrado de calefactor de estacio-namiento y refrigerador de estacionamiento para la cabina.901606755402110785384382383100600/7002495217022002475106599021301900Denominación .......................................................................FH-XHES5Modelo de camión ....................................................................Volvo FH Tipo de cabina ..............................................................Globetrotter XXL Dimensiones de la litera inferior (máx.) ............1.065x2.130x160 mm Dimensiones de la litera superior ......................600×1.900×100 mm Ángulo de apertura de la puerta ........................................................75°Altura total con la siguiente configuración ...........................3.870 mm Chasis ..............................................................................................Medio Neumáticos .......................................................................315/70 R22.5Suspensión delantera ...............................................................FST-PAR Posición del eje delantero ................................................................BajaESPECIFICACIÓNVolvo se reserva el derecho de modificar el diseño y las especificaciones sin previo aviso.。

Volvo 前端加载器 truck 产品说明书

Important NotesChassis DimensionsCab Height: +39 mm for CAB-CRW.Front Axle to Back of Cab: +1258 mm for CAB-CRW, +280 mm for CAB-SSLP. D-measure includes a front clearance of 50 mm and for rigid trucks also a subframe of 120 mm.Height can vary ± 20 mm for leaf and ± 10 mm for air suspension. All dimensions are for unladen chassis and any tag axles down.Weight and dimensions are based upon the following tyres:Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver. Kerb weight can vary ± 3%.Turning diameters are theoretically calculated.Legal weights can differ from country to country.For more detailed weight information, including optional equipment weights, ask your Volvo sales contact to enter your specification into the Volvo Weight Front Axle Tyres: 265/70R19.5Chassis Dimensions [mm]WB Wheelbase35003800410044004700500053005600590062006500A Overall Chassis Length6975 7425 7955 8425 8915 9435 9915 10425 10835 11430 11730 D Center of rear axle to front of body 2912 3212 3512 3812 4112 4412 4712 5012 5312 5612 5912 N Rear Overhang (Min.) 1685 1885 2085 2255 2485 2685 2895 3095 3295 3505 3755 NRear Overhang (Max.)2155230525352705289531153295 3505 3615 3910 3910Y Center of Gravity for Payload (Min.) 495 539 586 631 676 719 765 809 849 895 935 Y Center of Gravity for Payload (Max.) 679 740 803 865 926 987 1049 1110 1168 1230 1288 W Body Length (Min.) 4465 4943 5418 5894 6372 6850 7326 7804 8289 8763 9248 W Body Length (Max.) 4835 5346 5853 6362 6873 7385 7892 8372 8852 9332 9812Chassis Weights [kg]Front Axle 3160 3160 3155 3150 3150 3155 3155 3155 3170 3165 3175 Rear Axle 1365 1395 1420 1440 1470 1500 1520 1540 1575 1595 1605 Kerb Weight4525 4555 4575 4590 4620 4655 4675 4695 4745 4760 4780 Payload (including body, driver, fuel, etc.) 9475 9445 9425 9410 9380 9345 9325 9305 9255 9240 9220Turning Diameter [mm]Turning Circle Diameter Kerb to Kerb 12400 13300 14200 15100 16000 16900 1780018700 19600 20500 21400 Turning Circle Diameter Wall to Wall 1370014600 1550016400 17300 18200 19100 20000 20900 21800 22700Plated Weights [kg]DesignGross Vehicle Weight14000 Gross Combination Weight 15500 Front Axle 5000 Rear Axle 9500■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).■ CHH-MED Chassis height medium - approx. 900 mm above ground level■ RAD-A2V Rear air suspension, 1 axle - 1 driven□ CAB-CRW Crew cab □ CAB-DAY Day cab □ CAB-SSLP Comfort cab■ EU6SCR Euro 6 emission level with Selective Catalytic Reduction (SCR), particle filter and Exhaust Gas Recirculation (EGR)■ D8K250 Six cylinder diesel engine, 7.7 litre Euro 6 SCR + EGR (Diesel Particulate Filter), 250 hp, 950 Nm□ D8K280 Six cylinder diesel engine, 7.7 litre Euro 6 SCR + EGR (Diesel Particulate Filter), 280 hp, 1050 Nm□ AL306 Automatic 6-speed Allison gearbox, max input torque 1695 Nm □ ATO1056 I-Sync, Automated manual 6 speed gearbox, 1070 Nm ■ ZTO1006 Overdrive 6 speed manual ZF gearbox, 1050 Nm□ EBR-CEB Engine compression and exhaust brake■ EBR-EPG Engine brake with Exhaust pressure governor, EPG■ RSS1125A Rear single reduction solo axle - axle load 11 tonnes, GCW 25 tonnes□ RSS1132A Rear single reduction solo axle - axle load 11 tonnes, GCW 32.5 tonnesPackages□ DRIVEFL Driver convenience package FL□ VISIFL Visibility package FL - Optimizing the drivers field of vision around the cab□ AIRFLOW Airflow package FL - Includes adjustable roof spoiler, side deflector and sun visor□ AUDIODAB Audio System DAB■ AUDIOPD Audio Preparation DAB kit, incl. DAB-amplifierChassis □ FST-AIR Front air suspension■ FST-PAR Front parabolic leaf suspension (normal stiffness)■ FAL5.0 Front axle load 5.0 tonnes □ FAL5.8 Front axle load 5.8 tonnes■ RAL9.5 Rear axle load 9.5 tonnes□ EBS-MED EBS (Electronic Brake System) medium package ■ EBS-STD EBS (Electronic Brake System) standard package■ RST-AIR Rear air suspension■ SUSPL-E1 Remote control on wander-lead for air suspension levelling with 1 sensor on rear axle□ SUSPL-E2 Remote control on wander-lead for air suspension levelling with 2 sensors on rear axle□ SUSPL-E3 Integral three dash switches for air suspension levelling control with 1 sensor■ FST6060 Frame section thickness - web 6.0 mm / flange 6.0 mm □ FST7070 Frame section thickness - web 7.0 mm / flange 7.0 mm □ FST8080 Frame section thickness - web 8.0 mm / flange 8.0 mm■ 2BATT170 Batteries 2x170 Ah□ ADR2 ADR adaptation, 1 switch in dashboard, 1 outside on back of cab■ R80P Right 80 litre plastic diesel tank Min volume 80l Max volume 430l■ UL-FUEL Without left diesel tank Min volume 80l Max volume 215l□ ADTP-L AdBlue tank on left hand side ■ ADTP-R AdBlue tank on right hand side■ WHC-FIX1 One fixed wheel chock □ WHC-FIX2Two fixed wheel chocks□ TOWMBRH High mounted towing member, in centre of frame□ C-RO40AG Towing coupling Rockinger 400 G-145■ TOWF-NO1 One front towing device □ TOWF-NO2 Two front towing devices□ TOWR-ONE One rear towing device in frame end cross member□ TREL15 15 pol electrical trailer connector (ADR certified)□ TBC-EC Trailer brake connection, European Community□ RUP-FIX2 Fixed rear underrun protection, EC approved■ RFEND-T Transport mounted one-piece rear fenders□ 2024GSR General safety regulations 2024Rims and tyres □ RT-AL Brushed aluminium rims with std holes (long stud fixing) on allaxles□ RT-ALDP Dura-Bright polished aluminium rims with std holes (long studfixing) on all axles■ RT-STEEL Steel rims on all axles ■ SPWT-F Spare wheel with tyre equal to front wheel □ SWCP-LF Spare wheel carrier on left side in front of rear axle □ SWCP-R Spare wheel carrier transport mounted behind rear axle, onright-hand side (FH, FM)/below frame (FL,□ SWCP-T Spare wheel transport mounted on top of frame ■ SWCP-TP Spare wheel carrier transport mounted with the spare wheel ontop of the frame rails■ JACK-8T Jack, 8 tonnes□ GAUGE-TP Tyre pressure gaugePowertrain equipment ■ CS39A-O Single plate clutch, plate diameter 395 mm □ RET-TPT Retarder for hydraulic gearbox □ TC-HWO Oil cooler for hydraulic transmissions – water/oil■ 1COMP500 Single cylinder air compressor 360 cc / 500 l/min □ 2COM1080 Dual cylinder air compressor 720 cc / 1080 l/min ■ AIRIN-HI High air intake □ AIRIN-RL Low air intake, chassis mounted behind cab on left hand side ■ ACL1ST Air cleaner with one filter element □ ACL1ST-S Air cleaner with additional filter element ■ 24AL110B Alternator 110 Ampere □ 24AL130B Alternator 130 Ampere □ CCV-C Closed crankcase ventilation ■ CCV-OX Open crankcase ventilation with oil separator and amaintenance free gas centrifuge■ EST-AID Engine start pre-heating element □ PTER-100 Rear engine mounted clutch independent power-take-off withflange connection (DIN 100 / ISO 7646)□ PTER-DIN Rear engine mounted clutch independent PTO with splinedshaft groove (female) for a close coupled pump (DIN 5462 / ISO 7653)□ PTER1400 Rear engine mounted clutch independent power-take-off withflange connection (SAE 1410 / ISO 7647)□ PR-HF4S PTO transmission, Hydrocar, flange connection, side mounted □ PR-HF4SH PTO transmission, Hydrocar, flange connection, side mounted,high speed□ PR-HF6S PTO transmission, Hydrocar, flange connection, side mounted □ PR-HP4S PTO transmission, Hydrocar, pump connection, side mounted □ PR-HP4SH PTO transmission, Hydrocar, pump connection, side mounted,high speed□ PR-HP6S PTO transmission, Hydrocar, pump connection, side mounted □ PTR-FH1 Rear gearbox mounted Hydrocar S81 PTO with flangeconnection (DIN 90 / ISO 7646) for propeller shaft (800 Nm)□ PTR-FH2 Rear gearbox mounted Hydrocar S84 PTO with flangeconnection (DIN 90 / ISO 7646) for propeller shaft (430 Nm)connection (DIN 90 / ISO 7646) for propeller shaft (450 Nm)□ PTR-PH1 Rear gearbox mounted Hydrocar S81 PTO with connection(DIN 5462 / ISO 7653) for pump (800 Nm)□ PTR-PH2 Rear gearbox mounted Hydrocar S84 PTO with connection(DIN 5462 / ISO 7653) for pump (430 Nm)□ PTR-PH4 Rear gearbox mounted Hydrocar S88 PTO with connection(DIN 5462 / ISO 7653) for pump (450 Nm)□ PTR-PK Electrical and solenoid prep kit for gearbox PTO□ PTR-ZF2 Rear gearbox mounted ZF PTO with flange connection (DIN100 / ISO 7646) for prop shaft (410 Nm)□ PTR-ZF3 Rear gearbox mounted ZF PTO with connection (DIN 5462 /ISO 7653) for pump (410 Nm)□ PTR-ZF4 Rear gearbox mounted ZF PTO with flange connection (DIN100 / ISO 7646) for prop shaft (320 Nm)□ PTR-ZF5 Rear gearbox mounted ZF PTO with connection (DIN 5462 /ISO 7653) for pump (320 Nm)□ PTR-ZF6 Rear gearbox mounted ZF PTO with flange connection (DIN100 / ISO 7646) for prop shaft (270 Nm)□ HPG-F101 Gearbox mounted hydraulic pump F1-101, fixed displacement,single flow□ HPG-F41 Gearbox mounted hydraulic pump F1-41, fixed displacement,single flow□ HPG-F51 Gearbox mounted hydraulic pump F1-51, fixed displacement,single flow□ HPG-F61 Gearbox mounted hydraulic pump F1-61, fixed displacement,single flow□ HPG-F81 Gearbox mounted hydraulic pump F1-81, fixed displacement,single flow□ ETC Electronic throttle control - dash mounted switch for PTOspeed controlCab interior■ TAS-DIG4 Gen 4 one day digital tachograph, EC approved (GNSS &DSRC, EU 2020/1054)Cab exterior□ SUNV-B Exterior transparent dark grey front sun visor■ SUNV-PK Exterior front sun visor installation preparation kit (fasteners)□ AD-SIDES Short cab side air deflectors□ BEACON-P Prepared for roof beacons□ BEACONA2 2 amber beacon, roof mounted warning lampsSuperstructure preparations□ FBA-BTF Front body attachments for flexible body□ FBA-BTSF Front body attachments for semi-flexible body□ RBA-T2 Rear body attachments for helper frame□ TAILPREP Tail lift preparation kitServices□ TGW-4G Telematics gateway with 4G modem■ WVTA Whole Vehicle Type Approved■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).。

沃尔沃EC700挖机电路图资料

保险丝盒A，规保险丝盒B，元件表序号说明线路图1 电源馈给SCH012 ECU 电源和控制系统SCH023 起动和发动机速度控制SCH034 发动机喷油器SCH03-15 警告的传感器SCH046 工作灯SCH057 机器控制SCH068 HVAC（电子气候控制开关&控制器）SCH079 辅助加热器SCH0810 盒式磁带收音机SCH0911 喇叭和警报SCH1012 刮水器和清洗器SCH1113 座椅加热器，信标灯和室灯SCH1214 X1 控制和翻转SCH1315 X3 控制/快捷安装SCH1416 大臂浮动和可拆除配重SCH1517 燃油加注泵SCH1618 自动上润滑脂SCH17电路图SCH01标记名称标记名称BA3101 蓄电池1，(12 V, 225 A) SW3101 蓄电池断路器BA3102 蓄电池2，(12 V, 225 A) SW3301 起动开关FC01 保险丝，空气加热器RE3301 起动继电器FC02 保险丝，主RE3101 蓄电池继电器FC03 保险丝，B+ MO3301 起动电机FU16 保险丝，起动开关AL3201 发电机DI3301 (DE3301) 二极管R3201 (DI3302) 电阻器（220 ohm）DI3303 (DE3303) 二极管电路图SCH01电路图SCH02ECU 电源和控制系统电路图SCH02标记名称标记名称FU13 自动/手动开关馈电RE2705 继电器，数据记录FU15 紧急发动机速度控制与停止开关馈电V-CEU 汽车控制组件SW2704 紧急发动机速度控制与停止开关E-ECU 发动机控制组件PO3905 Contronic 插口I-ECU 仪表控制单元RE2704 继电器，EMS电源电路图SCH03 发动机速度控制系统电路图SCH03标记名称标记名称HE2301 油水分离加热器（选装）SW9118 安全排档开关SW2301 油水分离开关（选装）MA9108 安全电磁阀SW3301 起动机开关SE2606 冷却器温度传感器SW2701 发动机速度控制开关SE2501 周围环境温度传感器SW2703 自动怠速开关SE2205 机油液位传感器SW2704 应急开关SE2202 机油温度传感器RE2501 预热器继电器SE2507 增压温度传感器RE3301 起动机继电器SE2508 增压压力传感器HE2501 预热器SE2701 发动机速度传感器- 曲柄MO3301 起动电机SE2703 发动机转速传感器- 凸轮轴线路图SCH03-1标记名称标记名称MA2301 喷油器ncv1 MA2301A 喷油器sv1 MA2302 喷油器ncv2 MA2302A 喷油器sv2 MA2303 喷油器ncv3 MA2303A 喷油器sv3 MA2304 喷油器ncv4 MA2304A 喷油器sv4 MA2305 喷油器ncv5 MA2305A 喷油器sv5 MA2306 喷油器ncv6 MA2306A 喷油器sv6电路图SCH04警告的传感器线路图SCH04标记名称标记名称IM3811 冷却液温度表SE9401 超载压力开关（选装）IM3803 燃油液位量表SE9105 液压油温度传感器LC3803 中央警告指示灯SE2302 燃油水分水平传感器LC3201 充电指示灯SE2603 冷却液液位传感器LC2201 发动机机油压力指示灯SE2205 发动机机油液位传感器LC2501 空气滤清器堵塞指示灯SE2202 发动机机油温度传感器LC2502 预热指示灯SE2606 冷却器温度传感器LC2601 发动机高温指示灯SE2203 发动机机油压力传感器LC2602 冷却液低液位指示灯SE2301 燃油压力传感器LC9155 液压油温度指示灯SE2501 周围环境温度传感器LC9401 超载指示灯SE2502 空气滤清器堵塞传感器LC9911 自动润滑故障指示灯SE2508 增压空气压力传感器SE2303 燃油液位传感器SE2507 增压空气温度传感器电路图SCH05工作灯电路图SCH05标记名称标记名称SW3504 工作灯开关，标准LA3514 工作灯，驾驶室后部（选装）SW3505 工作灯开关，附加（选装）LA3515 工作灯，配重（选装）LA3512 工作灯，上部构造，左LA3521 工作灯，驾驶室前部，左侧（选装）LA3513 工作灯，上部构造，右LA3522 工作灯，驾驶室前部，右侧（选装）LA3527 工作灯，大臂，左RE3501 继电器，工作灯LA3528 工作灯，大臂，右RE3502 继电器，附加灯电路图SCH06机器控制数字 1线路图SCH06标记名称标记名称SE9111 导向压力传感器SW9118 安全排档开关SW9110 电力最大模式开关PWM9101 泵比例阀SW4220 高行驶速度开关R9101 手动电阻器1SW9103 泵手动开关SE9105 液压油温度传感器MA4220 运行电动机RE4202 继电器，高速MA9105 合流切断（大臂）RE4203 继电器，高速开关MA9106 合流切断（小臂）PWM9103 油冷却器比例阀MA9107 增压SW9401 超载选择开关（选装）MA9108 安全电磁阀电路图SCH07HVAC（电子温度控制单元）（选装）线路图SCH07标记名称标记名称CU8701 电子温控开关&控制器MO8707 作动器，空气混合SE8702 温度传感器，制冷剂MO8701 鼓风机马达SE8705 温度传感器，环境DI8701 二极管，鼓风机马达MA8701 压缩机离合器SE8706 再循环空气温度传感器，驾驶室SE8707 温度传感器，水RE8702 继电器，压缩机SE8701 高/低压力开关RE8703 继电器，第1 速度MO8703 作动器，进气RE8704 继电器，第2 速度MO8704 作动器- 面部RE8705 继电器，第3 速度MO8705 作动器，足部，右RE8706 继电器，第4 速度MO8706 作动器，足部，右线路图SCH08标记名称标记名称RE8701 HVAC 电源继电器MO8708 水泵，柴油加热器CU8702 计时器，柴油加热器MO8709 燃油泵，柴油加热器HE8701 柴油加热器单元RE8707 继电器，柴油加热器线路图SCH09标记名称标记名称CR3901 盒式磁带收音机SW3901 静音开关SO3901 DC-DC 变压器1 SA3901 扬声器，左SO3902 DC-DC 变压器2 SA3902 扬声器，右ANT3901 天线PO3901 12 V 电源插座线路图SCH10标记名称标记名称RE3611 继电器，喇叭SA4201 行走报警器（选装）SW3609 喇叭开关，左操纵杆SE4216 行走导向压力传感器（选装）SW3610 喇叭开关，右操纵杆SE5201 回转警报压力传感器SA3602 喇叭RE4206 继电器，行走警告(选择)SA3603 喇叭RE4207 继电器，回转警告(选装)SW4203 行走警报停止开关（选装）线路图SCH11标记名称标记名称SW3602 刮水器开关，上部SE3603 限制开关，下（选装）SW3603 刮水器开关，下部（选装）MO3601 清洗器泵SW3608 清洗器开关MO3602 刮水器马达，上部CU3601 刮水器电动机控制器MO3603 刮水器马达，下部SE3602 限制开关，上线路图SCH12标记名称标记名称SW8501 座位加热器开关（选择）HE3801 香烟打火机SW8502 空气悬置开关（选装）LA3601 旋转闪光警告灯（选装）SW3607 信标灯开关（选装）SW3503 驾驶室灯开关HE8501 座位加热器（选装LA3501 室内照明MO8501 空气悬置马达（选装）挖斗机故障代码的转换表。

YA700B 2-1 2 吨提舱杆操作者手册安全指南说明书

MODEL YA700B 2-1/2 TON CAPACITYSERVICE JACKOWNER/OPERATOR MANUALSAFETY INSTRUCTIONSSave these instructions. For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately and the manufacturer notified. If you suspect that the jack was subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until the jack has been checked by a factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual inspection be done by qualified personnel. Replace worn or damaged parts and assemblies with Snap-on authorized replacement parts only.PRODUCT DESCRIPTIONSnap-on Service Jack is designed to lift, but not sustain, one end of a vehicle.Immediately after lifting, loads must be supported by a pair of appropriately rated vehicle standsNEVER use this jack as astand alone device. After lifting, immediately support the liftedvehicle with a pair of appropriately rated vehicle stands.1. are compatible.2.a. Clockwiseb. load.smoothly.1This is the safety alert symbol. It is used to alert you to potential personal injury hazards.Obey all safety messages that follow this symbol to avoid possible injury or death.Do notMAINTENANCEImportant: Use only good qualityhydraulic jack oil. Avoid mixing differenttypes of fluid and never use brake fluid,turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause failure of the jack and the potential for sudden and immediate loss of load. The manufacturer recommends only quality grade hydraulic jack fluid.Adding oil1. With saddle fully lowered, set jack in upright, level position. Locate and remove vent screw.2. Fill with oil until ~3/16” above the inner cylinder as seen from the oil filler hole. If the oil level is too low, the jack will not raise to its advertised maximum height. Reinstall vent screw.Changing oilFor best performance, completely replace fluid supply at least once per year.1. With saddle fully lowered, remove the vent screw and drain the fluid into a suitable container.2. Fill with oil until ~3/16” above the inner cylinder as seen from the oil filler hole. Reinstall the vent screw.2OPERATIONLiftingshall Overloading may cause hydraulic LoweringClear all tools and personnelbefore lowering vehicle. Open release valve slowly! The further release valve (handle) is turned counter-clockwise, the faster the load will come down. Maintain control of the rate of speed at which the load lowers at all times.1. Raise load high enough to clear the jack stands.2. Carefully remove jack stands.3. Slowly turn release valve (handle) counter-clockwise, but no more than 1/2 full turn. If the load fails to lower : a . Use another jack to raise the ve-hicle high enough to reinstall jack stands. b . Remove the malfunctioning jack and then the jack stands.c . Using the functioning jack, lower the vehicle.4. After removing jack from under vehicle, push saddle down to reduce ram exposure to rust and contamination.- KNOW YOUR PRODUCT -Note: Dispose of hydraulic fluidin accordance with local environmental regulations. LubricationA periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that wheels, casters and pump assembliesmove freely.CleaningPeriodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.Note: Never use sandpaper or abrasivematerial on these surfaces! StorageLower the saddle to its lowest position when not in use.REPLACEMENT PARTS (refer to page 3)Not all components of the jacks are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Write forcurrent pricing: Snap-on Tools Company, Kenosha, WI 53141-14103TROUBLESHOOTINGSymptomPossible CausesCorrective ActionJack will not lift load • Release valve not tightly closed • Overload condition • Ensure release valve tightly closed • Remedy overload conditionJack bleeds off after lift• Hydraulic unit malfunction • Discontinue use, contact Snap-on Tech -nical ServiceJack will not lower after unloading • Reservoir overfilled • Linkages binding • Fluid level low • Drain fluid to proper level• Clean and lubricate moving parts • Ensure proper fluid level Will not lift to full extension• Fluid level low• Ensure proper fluid levelReplacement Parts List:LIMITED WARRANTY STATEMENTSnap-on Tools warrants this product to be free from defects in material and workmanship for a period of 2 years from date of purchase. This warranty applies to the original purchaser (end user) only and is not transferable. Damaged components and assemblies i.e. bent ram and pump pistons, dented reservoirs, cracked or altered components, are the result of misuse, misapplication or a combination of both. These conditions will not be considered for warranty credit. We have complete confidence that the Snap-on product you purchase will meet or exceed your performance requirement. However in the unlikely event that a Snap-on product fails due to material or workmanship defect within the warranty period you may contact your retailer for disposition or you may contact an Authorized Service Center listed in the product owner’s manual. Except where such limitations and exclusions are specifically prohibited by law, the consumer’s sole and exclusive remedy shall be the repair or replacement of the defective product. Snap-on shall not be liable for any consequential or incidental damage or loss whatsoever, and the duration of any and all expressed and implied warranties, including without limitation, any warranties of merchantability and fitness for a particular purpose, is limited to a period of 2 years from date of purchase. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state.Manufactured for Snap-on Tools Company2801 80th Street Kenosha, WI 53141-1410Made in China4。

挖掘机操作

将发动机转速下降至1400r/min左右，并保持
不变。如果此时操作任一操作杆，发动机转
速会在1s内迅速回升到油门控制盘设定的速
度。所以在自动降速状态下操作任一操作杆，
发动机的转速会突然升高，此时操作应小心。
2021/10/10
55
回转锁定开关
回转锁定开关
2021/10/10
回转锁定指示灯
56
回转锁定开关：用于锁定上部车体，使上部车体不能回转。此开关有关闭和打开两个位置。
67
工作装置模式指示工作模式指示
功率/用户模式指示最大功率指示预热指示
加热指示
2021/10/10
信息显示自动巡航指示行走速度指示自动怠速指示保养指示燃油加热指示减速指示
68
2021/10/10
69
2021/10/10
70
2021/10/10
71
充电故障报警灯：此灯用于指示机器充电系统是否正常。当启动开关置于 ON位置时，此灯亮为红色，表示发电机不发电。当发动机着车以后，此灯应熄灭，否则充电系统存在故障。应立机即油检压修力。报警灯：当发动机工作时，如果润滑系统机油压力低于正常水平时，此灯点亮，提醒驾驶人员立即停车检查。机油压力过低报警属于三级报警，故驾驶人员要格外注意。
2021/10/10
空调面板点烟器电锁
6
行走速度指示灯
速度选择开关
雨刷器洗涤开关
雨刷开关
2021/10/10
7
1、操作杆与脚踏板
挖掘机主要有安全锁定杆、行走操作杆、左手工作装置操作杆、右手工作装置操作杆、行走脚踏板及辅助装置控制踏板等操纵装置。
2021/10/10

沃尔沃挖掘机700说明书

沃尔沃挖机使用小常识

VOLVO挖掘机产品知识介绍

沃尔沃cx145dSR短臂挖掘机规格书说明书

挖掘机操作说明

沃尔沃挖掘机说明书专业知识讲座

沃尔沃挖掘机700说明书

挖掘机型号参数大全[指南]

进口沃尔沃柴油发动机挖掘机产品性能说明书

沃尔沃建筑设备 EC750E挖掘机说明书

沃尔沃汽车使用手册说明书

Volvo Trucks FL FE操作手册说明书

VOLVO使用说明书

Volvo Trucks FH Globetrotter XXL 产品说明书

Volvo 前端加载器 truck 产品说明书

沃尔沃EC700挖机电路图资料

YA700B 2-1 2 吨提舱杆 操作者手册 安全指南说明书

挖掘机操作

YA700B 2-1 2 吨提舱杆操作者手册安全指南说明书