塑胶件的表面处理_2015

NOTES/
3D Pattern延伸至侧面时需要注意拔模角。 THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
鑚雕、 CD纹/
Nຫໍສະໝຸດ BaiduTES/
此工艺适合于平面的产品部件。
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
黏接印刷 Binder Printing/
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
热压成型 Forming/
THE FINISHING OF THE PLASTIC
{
与塑胶件结合的表面处理
}
THE FINISHING OF THE PLASTIC
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
NOTES/
/IMR成品表面是以Hard Coating作为保护，而非透明膜 /IMR适合平缓的曲面，不适合落差较大的产品 /薄膜需向日本厂商购买，且需要订购一定的数量（以薄膜长度 计算），因此初期量试不易，厂内自主性较差，但大量生产稳 定度（良率）高。
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
{
做在塑胶模具上的表面处理
}
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
咬花/
常用规格：MT-11010、MT-11020等 基本制作流程： 模仁清洗 —> 遮蔽 —> 咬花(蚀刻) —> 清洗 —> 完 成
-Jamie 2015/07/10
THANK YOU
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
薄膜裁剪 Trimming/
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
注塑成型 Insert mold injection/
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
放电花/
常用规格：VDI-21、VDI-24等 基本制作流程： 模仁清洗 —> 遮蔽 —> 咬花(蚀刻) —> 清洗 —> 完 成
NOTES/
咬花是“模仁加工完成后”利用蚀刻来形成表面纹路。 放电是 “模仁加工时”透过调整放电加工的加工条件， 来控制表面纹路的粗细。
THE FINISHING OF THE PLASTIC
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
花纹印刷 Pattern Printing/
塑胶件的表面处理
---Jamie 2015/07/10
大纲
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
做在模具上的表面处理/
咬花（MT or TT）、放电花（VDI）、 抛光、 蚀刻、CNC雕刻、CD纹、 拉发丝等
与塑胶件结合的表面处理/
IML、IMD、NCVM、PVD、喷涂、 电镀、镭雕、网版印刷、移印等
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
-Jamie 2015/07/10
蚀刻/
档案的形式： 2D印刷稿（AI、CDR或DWG、DXF）
NOTES/
Pattern避免延伸至工件侧面，以免无法脱模。
THE FINISHING OF THE PLASTIC
-Jamie 2015/07/10
CNC雕刻/
档案的形式： 2D线稿（DWG、DXF或3D直接建模）