书架说明书
汉王T500移动电子书说明书
安全使用移动电子书 (3)前言 (5)温馨提示 (5)产品简介 (6)手写电磁屏技术 (6)电子墨水技术 (6)第一章产品特点 (7)第二章产品配置 (8)2.1包装及配件介绍 (8)2.2硬件介绍 (9)第三章无线书城 (11)3.1登录书城 (11)3.2无线书城栏目介绍 (11)3.3图书摘要页 (19)3.4图书阅读 (21)第四章我的书架 (25)4.1最近阅读 (25)4.2我的下载 (26)4.3我的书签 (27)4.4我的收藏 (28)4.5我的订购 (28)4.6我的包月 (29)第五章资源中心 (30)5.1我的文档 (30)5.2我的音乐 (31)5.3我的便笺 (32)5.4我的图片 (34)5.5本地书库 (35)5.6存储空间 (36)第六章通用功能及操作详解 (37)6.1系统导航页 (37)6.2用户界面 (37)6.3通用操作 (39)6.4如何为电池充电 (46)第七章个人空间 (47)7.1个人信息 (47)7.2好友管理 (47)7.3消费记录 (48)7.4包月退订 (49)7.5连载预订 (50)7.6消息中心 (51)第八章系统设置 (53)8.1显示设置 (53)8.2系统设置 (54)8.3网络设置 (55)8.4设备信息 (55)第九章使用技巧 (56)第十章文件管理 (57)10.1将移动电子书与电脑连接 (57)10.2管理文件 (57)第十一章技术规格 (58)第十二章维护与注意事项 (59)安全使用移动电子书请遵守下列注意事项，避免出现危险或非法情况，并确保移动电子书性能最佳。
安全警告将移动电子书放在儿童和宠物接触不到的地方将移动电子书及其零配件放在儿童和宠物接触不到的地方，儿童和宠物误吞下小的零配件可能导致窒息或发生危险。
保护听力使用耳机听音乐时，非常高的音量可能会损坏您的听力。
建议听音乐时使用所需的最小音量设置。
请在使用头戴式耳机或其它声音装置前先调低音量。
JBL L100 Classic 3-Way 书架扬声器说明书
2Thank you for purchasing the JBL ® L100 Classic 3-Way Loudspeaker For more than 70 years, JBL has been providing audio equipment for concert halls, recording studios and movie theaters around the world and has become the trusted choice of leading recording artists and sound engineers. The legendary JBL 4310 professional studio monitor helped produce many of the most popular albums of the 1960s and ‘70s. The 4310 was the inspiration for the L100 home audio loudspeaker introduced in 1970, which became JBL’s all-time best selling speaker. The L100 Classic is a modern interpretation of the original L100. The new L100 Classic honors this storied legacy with its iconic 12-inch (300mm) 3-way configuration, but with all-new drivers, crossover network, enclosure, and features to bring the design up to the highest 21st-century performance standards. Utilizing a compact monitor-type footprint, the L100 Classic features advanced JBL transducers including the JW300PW-8 Pure Pulp cone woofer, the 105H-1 Polymer-coated Pure Pulp cone midrange, and the JT025TI1-4 Titanium tweeter. The L100 Classic retains all of the performance attributes that endeared the original L100 to listeners in the ‘70’s and ‘80s, such as exceptional dynamic range and contrast, clean and effortless high output, and precise high impact bass. The updated L100 Classic adds even greater detail resolution across the full bandwidth, lower distortion and more lifelike stereo imaging, particularly off-axis. The L100 Classic is sure to become a new legend among music lovers everywhere.PACKAGE CONTENTS • One L100 Classic loudspeaker • One Quadrex foam grille • One L100 Classic Owner’s Manual PLACEMENT AND POSITIONING CAUTION: The L100 Classic weighs 58.8 lb. (26.7 kg) each. Before placing the speaker on a shelf or platform, be sure that it is sturdy enough to support the speaker’s weight.Before deciding where to place your speakers, survey your room and think about placement, using the illustration below as a guide.• A void placing the speakers near power amplifiers, heat registers or other objects that generate large amounts of heat.• D o not place the speakers in very humid or dusty places.• D o not place the speakers in direct sunlight or where they will be exposed to other intense light.• F or best results, place the speakers 6–8 feet (1.8-2.4m) apart. If you set the speakers farther apart than this, angle them toward the listening position.• T he speakers will produce the most accurate stereo soundstage when the angle between the listener and the speakers is between 40 and 60 degrees.• G enerally, bass output will increase as the speaker is moved closer to a wall or corner. For best performance, we recommend that you place the speakers at least 20 inches (50cm) away from the sidewalls.• T he speaker will yield the best stereo imaging when oriented vertically.• T he L100 Classic may be stand mounted with optional JBL metal stands (model JBL JS-120, sold separately) that angle the speaker upward. • I f not using the optional stands with built-in angle, then we recommend you to position each speaker so that its tweeter is approximately at ear level.min 20 inches (50cm)6-8 feet (1.8-2.4m)40° – 60°Listening PositionCAUTION: Make sure that all of the system’s electrical components are turned OFF (and preferably unplugged from their ac outlets) before making any connections.Speakers and amplifiers have corresponding positive and negative (“+” and “–”)connection terminals. The L100 Classic has color-coded connection terminals. The“+” terminal is red, while the “–” terminal is black. See the illustration on the right.The L100 Classic is designed so that a positive voltage at the “+” (red) terminalwill cause the speaker drivers to move outward (toward the room).We recommend using a high-quality speaker cable with polarity coding. The sideof the wire with a ridge or other coding is usually considered positive polarity (“+”).To ensure proper polarity, connect each “+” terminal on the back of the amplifieror receiver to the respective “+” (red) terminal on each speaker. Connect the “–” (black) terminals in a similar way. See your receiver or amplifier’s owner’s manual to confirm its connection procedures.BASIC SINGLE-WIRE CONNECTIONConnect the amplifier to each speaker as shown inthe illustration on the right.IMPORTANT: Do not reverse polarities (i.e., “+”to “–” or “–” to “+”) when making connections.Doing so will cause poor stereo imaging anddiminished bass performance.The L100 Classic’s gold-plated speaker terminalscan accept a variety of wire connector types:bare wire, spade connectors, pin connectorsand banana connectors.USING BARE WIRE OR PIN CONNECTORS:IMPORTANT: Make sure that the (+) and (–) wires orpins do not touch each other or the other terminal.Touching cables can cause a short circuit that candamage your receiver or amplifier.USING SPADE CONNECTORS:IMPORTANT: Make sure the (+) and (–) spade connectorblades do not touch each other or the other terminal.Touching blades can cause a short circuit thatcan damage your receiver or amplifier.USING BANANA CONNECTORS:Negative (-)TerminalPositive (+)Terminal+-Receiver or Amplifier(one channel shown)SpeakerConnector Panel A. Unscrew CapB. I nsert Bare Wire or Pin Connector through Hole in PostC. T ighten Cap to SecureA. Unscrew CapB. Insert SpaceConnector Bladesaround PostC. T ighten CapB. I nsert Banana Connectorinto Hole in CapA. T ighten Cap3L100 Classic Owner’s ManualCONTROLS/ADJUSTMENTSThe L100 Classic has front-panel adjustments that let you balancethe levels of the midrange driver (MF) and tweeter (HF) relative tothe woofer.You can use these controls to adjust the speaker’s sound accordingto your room’s acoustics, or your personal taste. The “0dB” defaultposition is a good place to start. Whatever sounds best to you inyour room is the right setting.As with most speakers, after you start playing the L100 Classic itwill take the drivers’ suspensions several weeks to “break in” andachieve optimum performance. During this period, the balancebetween the woofer, midrange, and tweeter may change, so werecommendthat you adjust the midrange and tweeter controls again after the break-in period.NOTE: There is a protective plastic film on the front control panel label that may be removed.CARING FOR YOUR SPEAKERS• W ipe the cabinet with a clean, dry cloth to remove dust. Damp cloths or cleaning paper may dull the cabinet’s finish.• D o not use volatile liquids such as benzene, paint thinner, alcohol, etc., on the cabinet. Do not spray insecticide near the cabinet.• T o remove dust from the foam grille, use a vacuum cleaner set to low suction.• D o not wash the grille in water.• I f the surfaces of the woofer and midrange cones become dusty, you can carefully sweep them clean witha soft, dry calligraphy brush or paintbrush. Do not use a damp cloth.• N EVER touch anything to the tweeter dome.SPECIFICATIONSSystem Type3-way bookshelf loudspeakerWoofer 12-inch (300mm) Pure Pulp cone (JW300PW-8)Midrange 5-1/4 inch (130mm) Polymer-coated, Pure Pulp cone (105H-1) Tweeter 1-inch (25 mm) Titanium dome with soft surround (JT025TI1-4) Impedance 4 ohmsRecommended Amplifier Power25-200 Watts RMSSensitivity (2.83V/1m) 90dBFrequency Response 40Hz-40kHz (-6dB)Crossover Frequencies 450Hz, 3.5kHzControls Attenuators for MF and HF DriversConnector Type Five-way gold-plated Binding PostsFinish Genuine walnut veneer enclosure with Quadrex foam grille in a choice of Black, Burnt Orange or Dark BlueDimensions (H x W x D)25.06" H x 15.34" W x 14.625" D (636.6mm x 389.7mm x 371.5mm)Weight 58.5 lb (26.7 kg) each Tweeter ControlMidrange Control4。
红楼梦立书 说明书
红楼梦立书说明书全文共四篇示例，供读者参考第一篇示例：《红楼梦立书说明书》序言：《红楼梦》是中国古典文学的经典之作，被誉为中国古代长篇小说的巅峰之作。
其内容丰富，情节曲折，人物形象鲜明，语言优美，被誉为中国文学史上的一部奇迹。
而今，我们特别推出《红楼梦立书》，希望通过这一款书立，让读者更深入地了解和感受《红楼梦》，让这部经典之作更加生动立体地呈现在我们面前。
一、产品概述《红楼梦立书》是根据《红楼梦》中的经典场景和人物形象设计制作而成的一种特殊的立书。
它采用精美的材质和精湛的工艺，将《红楼梦》中的经典场景和人物形象立体地呈现在读者面前，使读者仿佛置身于红楼之中，感受其中的情感纷争和风情万种。
二、产品特点1. 精美材质：《红楼梦立书》采用优质的纸张和印刷材料制作而成，质地精美，手感柔滑，色泽鲜艳，让人一看便爱不释手。
2. 精湛工艺：《红楼梦立书》经过精心的设计和制作，每一处细节都经过精心打磨，工艺精湛，让人感受到制作者的用心和热情。
3. 立体呈现：《红楼梦立书》不仅在设计上突出经典场景和人物形象，而且通过立体的方式展示出来，让读者可以更加直观地感受到《红楼梦》中的情节和人物。
三、产品优势1. 精品质量：《红楼梦立书》采用最优质的材料和最精湛的工艺制作而成，质量一流，耐用性强，绝对物有所值。
2. 独特设计：《红楼梦立书》经过精心设计，每一款都具有其独特的风格和特色，让人眼前一亮，爱不释手。
四、使用方法1. 打开《红楼梦立书》，将其竖立在桌子上或书架上。
2. 可以选择一处喜欢的场景或人物形象，仔细观看，感受其中的情感冲突和生活情趣。
3. 可以向家人或朋友展示《红楼梦立书》，一起分享其中的情感与趣味。
五、适用对象《红楼梦立书》适用于所有热爱文学和艺术的读者，特别适合喜欢《红楼梦》的粉丝和收藏家。
六、注意事项1. 请勿折叠或弯曲《红楼梦立书》，以免损坏其外观和立体效果。
2. 避免将《红楼梦立书》暴露在阳光下或高温环境中，以免引起材质退色或变形。
产品使用说明书【范本模板】
产品使用说明书注意事项1.为保证您和家人健康开心的使用本公司产品，请在使用酷堡品牌所提供的家具前，必须仔细阅读本章内容；2.打开包装，请查看安装说明书；3.按照安装说明书的要求核对所有部件及配件是否安全;4.按照安装说明书的安装步骤要求进行安装,并且必须坚固所有配件;5.折叠产品和升降气动杆的转椅，我们在适当的位置标识了“获！小心夹伤”和“危险！请勿频繁升降玩耍”的警示语；6.安装部件时，切勿用力过度致使板件开裂，失去握钉力；7.安装时注意地面水平,保证产品摆放平整，若地面不平要将家具脚垫垫平;8.书架、书柜、衣柜等高件家具，在使用过程中切勿打开柜门，悬挂物体，以免重力失衡倾倒；9.产品不能攀爬，也不能将柜门的抽屉全部找开或拉出，以免柜体倾倒伤人,更不能让儿童及悬于门上或坐在抽屉内玩耍；10.不要在柜顶或层板上放超负荷的重物，以免变形影响结构牢固性；11.门板和抽屉以自然开启为佳，不要猛拦猛推；12.所有抽屉及门板使用后请及时关上，以免碰伤您和家人；13.产品移动时，应将家具内摆放的物品以活动层板、玻璃等卸下，并且要轻抬轻放,不能硬拖硬拉.跨区搬运时，要把家具拆成部件搬运;14.家具使用过程中要经常检查整体结构是否松动，若有松动请将连接件拧紧;15.在使用过程中请注意边角突出部分，以免碰伤您和家人。
家具日常保养小常识1.家具就放在温度、温度适中，避免强光曝晒的地方。
2.经常保持家具通风，防止板材发霉和五金件氧化生锈。
3.家具要远离火源和灯源，避免局部受热而变色.4.经常用潮湿的软棉布对家具进行清洁，定期用家具清洁或保养剂(碧丽珠）对家具进行擦拭。
5.如不慎将有腐蚀性的溶剂滴到家具上，不要擦拭，应立即用软棉布吸干。
6.如不慎将黄没、番茄酱、果汁等滴在家具上或画货,应立即用干的棉布（蘸取牙膏或风油精）擦掉污渍，切忌用温抹布。
7.定期检查五金转接件的牢固程度，如发现松动应立即拧紧.8.不要给家具承受过大的外力，以免板材变形。
JBL L82 Classic MkII 8寸两孔书架扬声器快速入门指南说明书
L82 Classic MkII2-Way 8-in ch (200mm) Bookshelf LoudspeakerQuick Start GuideOverviewFor more information on the set-up and operation of thisproduct refer to the product page on the /specialty-audio/ website. Should further assistance be required feel free to contact customer support at the numbers below.Inside the US and Canada:+1 888.691.4171Outside the US and Canada:+44 1707 668 012Box Contents2x L82 Classic MkII Edition Loudspeakers 2x Quadrex Foam Grilles1x Quick Start Guide (This Document)Placement and Positioning●Before deciding where to place your speakers, survey your room and think about placement, using the illustration as a guide.●Avoid placing the speakers near power amplifiers, heat registers or other objects that generate large amounts of heat.●Avoid placing speakers in humid or dusty locations.●Avoid placing speakers in direct sunlight or other intense light.●Refer to the illustration for distances from walls, between the speakers, and angle to the listening position.●The speakers should be raised so that the tweeter is approximately at ear level.The JS-80 speaker stand (sold separately) can be used to achieve the proper listening height.●Angle the speakers towards the listening position closer to the listeners ears for a stronger center image and away from the listening position further from the listeners ears for a more spacious image.SpecificationsRecommended Stand:JBL JS-80 (Sold Separately)Wiring and ConnectionsIMPORTANT! Wiring Precautions●Ensure that the positive (+) and negative (-) bare wire or spades DO NOT touch each other when connected to the binding posts as this will short out the amplifier channel.●Ensure that the appropriate polarity is maintained from amplifier to speaker to ensure proper phase for both speakers.4 Post Terminals / Dual Sets of Binding Posts Terminal Wiring Options2-Wire ConnectionsBasic single-wire connection from amplifierWe recommend using HF Positive and LF Negative.B-Wire ConnectionsTwo-wire connection from single amplifier Remove terminal straps before connecting.Bi-Amp ConnectionsTwo-wire connection from multiple amplifiers Remove terminal straps before connecting.+-Positive + Red Negative - Black+-+-Positive + Red Negative - BlackControls and AdjustmentsThis speaker features a HF level control that can be used to adjust the HF level independently from the level of the woofer. The default setting of 0dB represents a flat balance between the woofer and tweeter, however in some cases there may be a need to adjust the level of the tweeter.High Frequencies (HF Level) Adjustments●For rooms where the high frequencies sound bright, lower the relative HF level by turning the knob counterclockwise.●For rooms where the high frequencies sound dull, raise the relative HF level by turning the knob clockwise.Harman International Industries, Incorporated.8500 Balboa Blvd, Northridge CA 91329 United States.European Representative: Harman International Industries, Incorporated.EMEA Liaison Office, Danzigerkade 16G, 1013 AP Amsterdam, The Netherlands.UK Business Address: Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom. © 2023 Harman International Industries, Incorporated. All Rights Reserved.JBL is a trademark of Harman International Industries, Incorporated registered in the United States and other countries.Features, Specifications, and Appearance subject to change without notice.。
图书馆家具说明
图书馆家具系列实木护板钢木书架书架说明： 1. 架体为全钢制结构，采用上海宝钢优质 一级冷轧钢板，表面采用美国杜邦优质环 保塑粉高压静电喷涂。
2.护板基材采用吉林森工露水河E1级环保 刨花板，表面采用优质实木皮饰面，德国 易涂宝优质环保油漆处理。
漆面光滑，有 效的抗划伤。
3.造型：护板采用两侧凸起平板，中间凹 陷部分回字形花纹体现了一种古典的美 感。
内部结构采用稳固的双柱式。
整体规 划实用、合理。
实现了空间的最大化利 用。
实木护板钢木书架书架说明： 1.架体为全钢制结构，采用上海宝钢优质 一级冷轧钢板，表面采用美国杜邦优质环 保塑粉高压静电喷涂。
2.护板基材采用吉林森工露水河E1级环保 刨花板，表面采用优质实木皮饰面，德国 易涂宝优质环保油漆处理。
漆面光滑，有 效的抗划伤。
3.造型：护板采用框架嵌芯板式架构，护 板结构稳固，样式耐看。
结构方面采用稳 固的双立柱样式，整体规划实用、合理。
实现了空间的最大化利用。
防火板护板钢木书架书架说明： 1.架体为全钢制结构，采用上海宝钢优质 一级冷轧钢板，表面采用美国杜邦优质环 保塑粉高压静电喷涂。
2.护板采用上海富美家优质环保V-1级 20mm厚防火板材。
该板材具有良好的耐 磨、耐热性。
在火灾发生时。
能有效的抑 制火势蔓延。
3.造型：护板采用两块板分体架构，外观 整洁，把书架的双面使用体现出来。
结构 方面采用稳固的双立柱样式，整体规划实 用、合理。
实现了空间的最大化利用。
防火板护板钢木书架书架说明： 1.架体为全钢制结构，采用上海宝钢优质 一级冷轧钢板，表面采用美国杜邦优质环 保塑粉高压静电喷涂。
2.护板采用上海富美家优质环保V-1级 20mm厚防火板材。
该板材具有良好的耐 磨、耐热性。
在火灾发生时。
能有效的抑 制火势蔓延。
3.造型：护板采用U型结构，外观整体简 洁、大方。
结构方面采用稳固的双立柱样 式，整体规划实用、合理。
实现了空间的 最大化利用。
威法Diamond 220 书架音箱说明书
"…quite simply they are one of the best budget speakers around."What Hi-Fi review, October 2014Diamond 220Best Stereo Speakers up to £200HeritageBritain has long been recognised as being the home of loudspeaker technology in terms of innovation and quality. Gilbert Briggs’ first loudspeaker was manufactured in 1932 through a passion for music and an ear for detail – in a sleepy little market town of Yorkshire Wharfedale was born. After winning multiple awards, his work is still much admired and respected throughout the hi-fi world today and our speakers are still driven by the same passion for music. Wharfedale’s Diamond series has a long history of achievement. The first Diamond was born in 1982 in the form of a rear ported hi-fi speaker. A combination of a 19mm dome tweeter, 120mm long throw polypropylene bass/mid driver and a simple yet highly effective crossover in a compact hi-fi speaker took the industry by storm. The speaker produced an impeccable stereo image, quickly becoming a best seller and a permanent fixture in the Wharfedale product range. Since then, every Wharfedale Diamond Series has been a best-seller.From 1982 Wharfedale Diamond has meant one thing – impeccable performance at an affordable price. Today we are pleased to bring you the latest series of loudspeakers from Wharfedale that aspires to this tradition – Diamond 200.Diamond Re-EngineeredThe Diamond 200 boasts the latest in hi-fi technology to produce a thoroughly enjoyable listening experience. Foremost in the design criteria for Diamond 200 is the ongoing research into loudspeaker driver sound quality. The Diamond Series utilises our famous woven Kevlar cone drawing influence from the flagship Jade Series. Semi-elliptical ‘break-up’ areas on the kevlar woofer smooth the response through the audible range and the cone edges are treated with a unique diamond pattern moulding.For Diamond 200 series Wharfedale’s engineers have refined and updated this design and drive unit motor systems have been redefined with more power with greater efficiency. Larger magnets for instance on the Diamond 220 create a greater sensitivity compared with previous loudspeakers.The treble unit uses a sheer fabric dome and advanced ferrite magnet system, surrounded by a carefully crafted wave guide that encourages outstanding midrange performance too.Improved Cabinet ConstructionCabinet materials have taken a leaf out of the extensive research that resulted in the advanced Jade series. Even the appearance is improved with new, lacquered front baffles and cosmetically enhanced veneers.Cabinet walls and internal bracing developed using Wharfedale’s latest ‘Virtual Speaker ’ software, with the help of Delayed Cumulative Spectral Analysis that ruthlessly reveals panel coloration in all its forms. Using this technique Wharfedale engineers updated the cabinet combining layers of particle board and MDF bonded in a unique structure to damp annoying High-Q resonances and block internal sound leakage. The effect is that the ‘noise’ from cabinet walls is buried more than 35dB below the driver output. The same computer modeling also assists in fine tuning the crossover while ensuring the speaker projects both on and off-axis for an enjoyable, room-filling experience.Tuned For Your Living RoomHundreds of hours of listening tests have resulted in refinements to the crossover systems to yield greater attack, dynamics and musical enjoyment in conjunction with the neutrality and startling realism that is a Wharfedale tradition. Although computer modeling is a valuable tool in modern loudspeaker production, it is a combination of our engineers experience and passion for music that results in such an enjoyable loudspeaker.In the final evaluation weeks are spent fine tuning the acoustic performance using a wide variety of music in Wharfedale’s five listening rooms, each of which mimics the kind of domestic environments the Diamond Series are likely to be used in. Only when the acoustic tests are deemed truly satisfying are the loudspeaker designs signed-off for production, ensuring that each speaker model fulfils its eventual owner’s dreams of musically enjoyable reproduction from Britain’s Most Famous Loudspeakers.SPECIFICATIONS:General description2-way bookshelf speaker2-way bookshelf speaker 2.5-way floorstanding speaker Enclosure type bass reflex bass reflex bass reflexTransducer complement2-way2-way 2.5-wayBass driver100mm Woven Kevlar Cone130mm Woven Kevlar Cone165mm Woven Kevlar Cone Midrange driver165mm Woven Kevlar Cone Treble driver25mm Soft Dome25mm Soft Dome25mm Soft DomeAV shield No No NoSensitivity(2.83V @ 1m)86dB86dB88dBRecommended amplifier power15-75W25-100W25-150WPeak SPL 90dB95dB102dBNominal impedance 8Ω Compatible8Ω Compatible8Ω CompatibleMinimum impedance 4.1Ω 4.1Ω 3.7ΩFrequency response (+/-3dB)68Hz - 20kHz56Hz - 20kHz40Hz - 20kHzBass extension (-6dB)58Hz45Hz37HzCrossover frequency 2.3kHz 2.2kHz 2.3kHzCabinet Volume (in litres) 3.2L7L35LDimensions (mm)Height (on plinth & spikes) 232mm315mm(938+25)mmWidth 143mm174mm196mmDepth (with terminals) (165+5)mm(227+28)mm(306+28)mmCarton size415x260x330mm495x320x410mm420x310x1060mmNet weight 2.6kg/pcs 5.3kg/pcs17.8kg/pcsGross weight 6.5kg/ctn12.6kg/ctn21.2kg/ctnFinish Rosewood /Walnut Pearl/Whitesandex/Blackwood Vinyl Rosewood /Walnut Pearl/Whitesandex/Blackwood VinylRosewood /Walnut Pearl/Whitesandex/Blackwood VinylStandard accessories spike/spike seat Optional accessories3-way floorstanding speaker3-way floorstanding speaker2-way centre speakerbass reflex bass reflex bass reflex3-way3-way2-way165mm Woven Kevlar Cone x 2200mm Woven Kevlar Cone x 2130mm Woven Kevlar Cone x 2 130mm Woven Kevlar Cone130mm Woven Kevlar Cone25mm Soft Dome25mm Soft Dome25mm Soft DomeNo No Yes89dB89dB89dB25-150W25-200W25-150W102dB110dB95dB4Ω6Ω 8Ω Compatible3.0Ω 3.1Ω4Ω40Hz - 20kHz35Hz - 20kHz60Hz - 20kHz35Hz32Hz65Hz470Hz & 2.7kHz350Hz & 2.5kHz 2.3kHzMid internal 10.6L Mid internal 8L11.8LBass internal 37.2L Bass internal 66.3L(998+25)mm(1103+25)mm(174+16)mm204mm250mm470mm(366+28)mm(396+28)mm(236+28)mm480x320x1120mm510x365x1225mm560x3320x280mm21.6kg/pcs29.4kg/pcs8.5kg/pcs25.2kg/ctn34.5kg/ctn10kg/ctnRosewood /Walnut Pearl/White sandex/ Blackwood Vinyl Rosewood /Walnut Pearl/White sandex/Blackwood VinylRosewood /Walnut Pearl/White sandex/Blackwood Vinylspike/spike seat spike/spike seat rubber feetcentre base。
现代简约书柜设计说明怎么写
现代简约书柜设计说明怎么写书柜是书房家具中的主要家具之一，即专门用来存放书籍、报刊、杂志等书物的柜子。
那么，现代简约书柜制定说明怎么写?下面我为大家整理的一些内容，希望大家喜爱!其实现代书柜制定主要是确定尺寸的宽高，然后定义书柜的用料，最后说明的制定用意以及款式类型，然后再定义风格就行了。
现代简约风格书房书柜制定特点一、现代简约书房制定说明简单的几何线条在现代简约风格中，最特别的特点就是会采纳简单的几何线条，其书房制定也会是如此。
就如上面现代简约书房装修效果图的展示，其整个书房采纳黑白色彩最经典的搭配，白色的瓷砖地面以及黑白框相间的制定，书架采纳黑色的条框制定，简单而规矩的线条使整个书房显的条理、大方。
而黑色、铁质材质的书桌以及一副风光画给人严正、沉稳的感觉可以使人静下心来阅读、工作，书桌上放置了一个造型奇特的台灯以及地面上铺设的一个造型奇特的地垫，给整个书房增添了一份时尚和活泼。
二、现代简约书房制定说明时代特征显著在现代简约风格中，很容易引起人注意的就是，其时代特征显著。
就如上面现代简约书房效果图的展示，其整个书房采纳原色木质制定，木质的地板、书桌、书架以及门，给人一种深厚的书香气息，能使人静下心来工作、学习。
而书桌对面的墙壁上制定了外形美观、绿色的隔层，可以放置一下摆饰品等小东西，方便又有用，而且绿色给整个书房增添了一丝清新和年轻的朝气，简单、大方的两个黑色的座椅以及书架上摆放着整齐、五颜六色的书本，整个房间没有过分的装饰，一切从功能出发，体现了现代生活快节奏、简约和有用同时又富有朝气的生活气息。
三、现代简约书房制定说明独特而又个性的装饰在现代简约风格中，也可以有独特而个性化的装饰制定。
就以上图中现代简约风格制定的书房为例，其整个书房一眼望去很简单、利索，没有多余繁杂的装饰品，整个白色的墙壁，一面制定成小格子造型的书架，有用美观，另外一面白色的墙壁上制定了手绘画，简单的黑色线条描述成一棵树木，造型美观的吊灯从吊顶垂下，看上去仿佛是挂在树枝上一样。
GBT 13667.1-2003钢制书架通用技求条件
２００
皿７ ５
１９ ００以 下
２００
ｍ２ ６ 妻 １９ ００＾２ ２００
单面 皿８
６ ＞ １ ９００－ ２ ２００ 户 呜、Ｊ
表 １ Ｉ类 竖 放 式 单 复 柱 书 架
种类
种类 层数
符号
尺 高 度 ／ｍｍ
Ｒｍ１ＪＥｍ／Ｉ 一 寸 搁板
ｌ
深度／
ｌ
种类 符号
ｔ１ ， ｎ ｌ
尺
层数 高 度 ／ｍｍ
Ｉ
寸
搁板
瞥ｍｍ／深 度 ／
８００ ］［１ ２ ８ 妻 ２ ２００＾－２ ５００
注 ：这里所说 的横放是 指将收藏物的长边方向朝下的放置方法 。
衰 ３ １类竖放式书架
种类
单面
Ｊ刁＝１士 兀 李
双面
种类 层数
符号
尺 高 度 ／ｍｍ
臀 一 寸 搁板 深度／
种类 层数
符号
幻ｌ ｍ
尺 高度／ｍｍ
寸
搁板 深度／
ｍｍ ｍ ｍ
ｍ１ ５
１９ ００以 下
ｍ ｍ
单面
西ｓ 主 】 卫 弓 甲 门丁 少
双面
பைடு நூலகம்
Ｉ１ １２ １３ １４ １５ １６
４
１ ９００以 下
２００ ．
５ ＞ １９ ００－２ ２００ ３１０
６ ＞ ２ ２００－２ ５００
４
） １ ９００以 下 ４００
５ ＞ １ ９００－２ ２００ 产 乡
２００
单面
侣才 卜干 〕比
产 ．
灰 ｔｔ ｝ｕ
ｔ一 Ｌ ＿
｝一
｝｝｝干一盯拼一｝卜匕一￣一一￣一
下 ＿」 ｝’州 一 门
桌面书架产品装配说明书
- Assemble the panel (I) to panel (G) using screw (5) as shown.
8 This illustration shows the same parts as step 7, but viewed from the top.
(Front)
5
(Top)
12 The parts assembled in steps 9 and 11 are shown here in the normal upright position.
(Top)ຫໍສະໝຸດ 5(Left)(Right)
- With the parts assembled in steps 9 and 11 positioned as shown in the illustration, assemble the panels (E) and (F) using screws (5).
15
7 11
H
I
- Cover all the screw heads with caps (7) as shown.Insert the metal pins (11) into the corresponding holes on panels (D),(H) and (I) as shown.Then insert the Shelf panel (L) into the unit.
4
14Pcs Screw - 3 x 16mm
5
15Pcs Screw - 5 x 38mm
6
8Pcs Cam locks caps
7 19Pcs
Screw Caps
8 3Pcs
L Bracket
杰弗里斯 69英寸灰白色梯形书架说明书
IMAGE
DESCRIPTION
CROSSBAR BARRE TRANSVERSALE
QTY / QTÉ
3
TOP SHELF
2
1
ÉTAGÈRE SUPÉRIEURE
SHELF PANEL
3
1
PANNEAU DE TABLETTE
BOTTOM SHELF
4
1
ÉTAGÈRE DU BAS
CROSSBAR
FRONT FACING RIGHT LEG
13
1
PATTE AVANT DROITE
FRONT FACING LEFT LEG
14
1
PATTE AVANT GAUCHE
FRONT FACING RIGHT LEG
15
1
PATTE AVANT DROITE
PAGE 4 DE / OF 21
PIÈCE / PART #
HANDLE
Q
POIGNÉE
QTY / QTÉ
8 2
BOLT SET
R
4
ENSEMBLE DE BOULON
GLUE
S
1
COLLE
ASSEMBLING SCREW -
Ø1/8" X 1 3/8"
T
8
VIS D'ASSEMBLAGE -
Ø1/8" X 1 3/8"
PAGE 10 DE / OF 21
PIÈCE / PART #
18
2
PANNEAU ARRIÈRE TIROIR
DRAWER BOTTOM PANEL
19
2
PANNEAU DU BAS TIROIR
Episode ES-700-MON-6与ES-700-LCR-5书架扬声器所有者手册说明书
is recommended. The wire may be connected directly to the speaker’s five-way binding posts, or terminated with either spade lugs or banana plugs.
RECOMMENDED AMPLIFIER POWER • To get the best performance from your Episode ES-700-MON-6 or ES-700-LCR-5 speaker,
we recommend powering it with an amplifier or receiver with a power rating between 20 and 130 Watts RMS per channel.
BI-AMPING/ BI-WIRING
• If bi-amping or bi-wiring is desired, remove the two terminal jumpers and connect speaker wires appropriately to the terminals marked HF (high frequencies) and LF (low frequencies). terminal jumpers
CLEANING
• Use a dampened soft cloth or paper towel to clean the cabinet. The grille is best cleaned by brushing it off with a lint-free cloth.
书架桌面置物架小型说明书
书架桌面置物架小型说明书
1、准备好施工工具，尤其是需要有一个必备的冲击钻。
要提醒大家的是，在选择冲击钻的时候可以根据自己安装置物架的膨胀螺丝的大小来选择冲击钻，冲击钻可以适当选择大一号的钻头。
2、先将置物架规划好大概的安装位置，之后使用尺子等测量好高度和孔距，使用铅笔做好标记。
然后拿冲击钻打孔。
3、打完孔之后就可以将膨胀螺丝放置在孔内，用锤子将膨胀螺丝固定。
不同的膨胀螺丝固定的方法不同，具体的话可以根据自己选择的膨胀螺丝来进行安装。
自制简易书架设计说明书
目录一、作品名称二、设计背景三、需要材料及工具四、设计思路五、设计图六、功能介绍七、创新点一、作品名称简易书架二、设计背景现在家里的书架基本上是买回来的,但有时候会有一些小问题,那就是书架的大小、颜色可能不太适合家里的环境。
在这种情况下，我们自己制作的这种简易书架就会派上用场了。
三、需要材料及工具材料：- 木头- 3块2700*120*18的板- 至少2到3块2700*1400*18硬纸板(个人建议三合板比较好) - 3个配有螺旋的超长的螺丝钉- 涂料和清漆工具：- 竖锔- 钻孔机四、设计思路第一步：垂直面板架制作首先，切割好木板的形状，垂直和水平线条。
3块垂直的木板一定要大小一致。
架子就可以随意安置了。
或大或小，大的可以放上两本厚厚的古典名著和相册。
这些只需要在长度和宽度上做些改变就好了。
窍门就在于切割出漂亮的弧线。
水平面木板基本也是直的，只是在离末端40厘米的地方切割成弯曲形状。
第二步：切割划刻整个过程里最复杂的一步就是精确地锯出横架和竖架契合的凹口。
每块横板切出三个凹口，入图所示，中心一个口，离两端20厘米处两个口。
竖板上的凹口割据自己的需要来切，因为它直接决定着格子空间大小。
根据你的书籍大小来调整切口的位置。
可以参考下我的数据：放相册的那一层，两个凹口之间的距离依次是33厘米，30厘米，26厘米。
精确测量好，做好标记，然后再切口。
如果测量不够精确，书架就不够平衡。
所有的切口要有18毫米宽，这样木板才能插进去。
至于切口也就是凹口的深度，就是窍门的所在啦。
竖板是曲线型的，所以不能把所有的凹口都切成同样的深度。
我建议切口都比平均宽度少1/2。
比如，宽度为12厘米，切口6厘米，宽度为6厘米，切口只要3厘米就好。
强调一下，所有竖板上的凹口都要大小深度一样。
横板上的凹口要和竖板上的凹口相匹配。
第三步：安装现在可以把所有的木板都组装起来，看是否匹配好，然后再拆开，上涂料和清漆。
当然，如果你成竹在胸的话，就可以直接上漆了。