7447789004;中文规格书,Datasheet资料
7447709002;中文规格书,Datasheet资料
description :A mmB mmC mmD mmE mm= Start of winding Marking = Inductance codeEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated current Sättigungsstrom/saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°C100% SnALa11-08-10MST 04-10-11NameDatum / datetyp.HP 4274 A für/for L und/and Q Anbindung an Elektrode / soldering wire to plating:Sn/Cu - 99.3/0.7 %Draht / wire:2SFBW 155°CE Testbedingungen / test conditions:Ferrit/ferrite http://www.we-online.deR DC max 4,94I sat HP 34401 A für/for I DC und/and R DCLuftfeuchtigkeit / humidity:∆T=40 K MHzA 11,50I DC +40/-20%max.1 kHz / 0,25V @ 20°C µH L N 2,2typ.POWER-CHOKE WE-PDA Mechanische Abmessungen / dimensions:Würth Elektronik..................................................................................Endoberfläche / finishing electrode:Datum / date................................................................................. @ 20°C R DC typ DATUM / DATE : 2004-10-11max.A Testbedingungen / test conditions 20,00typ.|∆L/L|<10%C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:Umgebungstemp. / ambient temperature: -40°C - + 85°C 65,00SRFBasismaterial / base material:Betriebstemp. / operating temperature: -40°C - + 125°C 6,00Freigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.m 12,0 ± 0,512,0 ± 0,5Typ XXL5,0 ref 7,6 ref 10,0 max.m Version 2D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ................................................................................................Kontrolliert / approvedÄnderung / modificationVersion 1Unterschrift / signature [mm]5,42,97,0 12,82,9A B• MarkingCDEdescription :ALa11-08-10MST 04-10-11NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.de................................................................................................Geprüft / checked Kontrolliert / approvedÄnderung / modificationVersion 1Datum / dateUnterschrift / signature Würth ElektronikH Induktivitätskurve / Inductance curve :Freigabe erteilt / general release:Kunde / customer...................................................................................................................................................................POWER-CHOKE WE-PDDATUM / DATE : 2004-10-11Version 20,000,501,001,502,002,500,05,010,015,020,025,030,0L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A12,85± 0,1mm B 20,0± 0,1mm C 1,50± 0,05mm+ 0,1- 0,0E 4,00± 0,1mmF 2,00± 0,1mmG 1,75± 0,1mmH 11,5± 0,1mmI 12,85± 0,1mmJ 10,60± 0,1mm T 0,50± 0,05mm W 24,0± 0,3mma 330,0± 0,5mmb 20,20± 0,1mm+ 0,5- 1,0d 100,0± 1,0mmALa11-08-10MST 04-10-11NameDatum / date................................................................................................http://www.we-online.deGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modification...................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customermm 13,00c DATUM / DATE : 2004-10-11Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:mm 1,50D POWER-CHOKE WE-PDVersion 1Version 2ITF E øD CA B WHGCC Ø cadbThe force for tearing off cover tape is 20 to 70 grams in arrow direction150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.xxxxxx分销商库存信息: WURTH-ELECTRONICS 7447709002。
744760410A;中文规格书,Datasheet资料
Bezeichnung :description :Größe / size 0805A 2,0 ± 0,2mmB 1,25 ± 0,2mmC 1,2 ± 0,2mmD 0,5 ref.mm F 0,4 ± 0,1mm H 1,2mm I 0,925mm J0,75mm60 … 70%25°CFerrit/ ferrite AWe Version 104-10-11NameÄnderung / modificationDatum / dateUmgebungstemperatur / ambient temperature: -40°C ~ + 70°C Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature:G Eigenschaften / general specifications:E Testbedingungen / test conditions:Lagerbedingungen / storage conditions: -10°C ~ + 40°C 30 ~ 70% RHF Werkstoffe & Zulassungen / material & approvals:Kontaktmaterial / contact plating:Ag/Pd + Ni + SnBasismaterial / base material: Spezifikation für Freigabe / specification for releaseDATUM / DATE : 2004-10-11Datum / date.............................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Betriebstemperatur / operating temperature: -40°C ~ +85°C Kunde / customerFreigabe erteilt / general release:...................................................................................................................................................................................................Kunde / customer:744760410AFerrit-SMD-Induktivität WE-IF Ferrite-SMD-Inductor WE-IFArtikelnummer / part number : A Mechanische Abmessungen / dimensions:ENA 5071B für/for SRFD Prüfgeräte / test equipment:Agilent 4287A + HP 16193A für/for L und/and Q HP 4338B für/for R DCHP 4285A + 42841A + 42842C + 42851-6110 für/for I DC Würth ElektronikThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such asaerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when us electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stageRoHS compliantLFSEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744760410A。
7447709006;中文规格书,Datasheet资料
description :A mmB mmC mmD mmE mm= Start of winding Marking = Inductance codeEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated current Sättigungsstrom/saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°C100% SnALa11-08-10MST 04-10-11NameDatum / datetyp.HP 4274 A für/for L und/and Q Anbindung an Elektrode / soldering wire to plating:Sn/Cu - 99.3/0.7 %Draht / wire:2SFBW 155°CE Testbedingungen / test conditions:Ferrit/ferrite http://www.we-online.deR DC max 9,10I sat HP 34401 A für/for I DC und/and R DCLuftfeuchtigkeit / humidity:∆T=40 K MHzA 8,40I DC ±20%max.1 kHz / 0,25V @ 20°C µH L N 6,8typ.POWER-CHOKE WE-PDA Mechanische Abmessungen / dimensions:Würth Elektronik..................................................................................Endoberfläche / finishing electrode:Datum / date................................................................................. @ 20°C R DC typ DATUM / DATE : 2004-10-11max.A Testbedingungen / test conditions 12,80typ.|∆L/L|<10%C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:Umgebungstemp. / ambient temperature: -40°C - + 85°C 23,00SRFBasismaterial / base material:Betriebstemp. / operating temperature: -40°C - + 125°C 14,00Freigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.m 12,0 ± 0,512,0 ± 0,5Typ XXL5,0 ref 7,6 ref 10,0 max.m Version 2D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ................................................................................................Kontrolliert / approvedÄnderung / modificationVersion 1Unterschrift / signature [mm]5,42,97,0 12,82,9A B• MarkingCDEdescription :ALa11-08-10MST 04-10-11NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.de................................................................................................Geprüft / checked Kontrolliert / approvedÄnderung / modificationVersion 1Datum / dateUnterschrift / signature Würth ElektronikH Induktivitätskurve / Inductance curve :Freigabe erteilt / general release:Kunde / customer...................................................................................................................................................................POWER-CHOKE WE-PDDATUM / DATE : 2004-10-11Version 20,001,002,003,004,005,006,007,008,000,02,04,06,08,010,012,014,016,0L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A12,85± 0,1mm B 20,0± 0,1mm C 1,50± 0,05mm+ 0,1- 0,0E 4,00± 0,1mmF 2,00± 0,1mmG 1,75± 0,1mmH 11,5± 0,1mmI 12,85± 0,1mmJ 10,60± 0,1mm T 0,50± 0,05mm W 24,0± 0,3mma 330,0± 0,5mmb 20,20± 0,1mm+ 0,5- 1,0d 100,0± 1,0mmALa11-08-10MST 04-10-11NameDatum / date................................................................................................http://www.we-online.deGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modification...................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customermm 13,00c DATUM / DATE : 2004-10-11Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:mm 1,50D POWER-CHOKE WE-PDVersion 1Version 2ITF E øD CA B WHGCC Ø cadbThe force for tearing off cover tape is 20 to 70 grams in arrow direction150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.xxxxxx分销商库存信息: WURTH-ELECTRONICS 7447709006。
7446631007;中文规格书,Datasheet资料
description :Gehäuse / case: SHA 23,3 max.mmB 18,5 max.mmC 11,5 max.mmD 10,0 ± 0,2mmE 5,0 ± 0,2mmF 19,6 ± 0,3mmG 2,1 ± 0,1mm H0,4 typ.mmEigenschaften / propertiesWert / valueEinheit / unittol.Leerlauf-Induktivität /inductanceDC-Widerstand /DC-resistance Nennstrom /rated current Nennspannung /rated voltage33%+20°CPrüfspannung / testing voltage1500 V, 50 Hz 5mA, 2 sec.SBaVersion 22010-05-17BKo Version 12009-02-17NameÄnderung / modificationDatum / dateÜbertemperatur / temperature rise: < 55 KKlimabeständigkeit/ climatic class: 40/125/21.............................................................Datum / dateCURRENT-COMPENSATED CHOKE WE-LF SMDmH R DC WAYNE KERR WK3260B/WK3265für/for L 0 und/and R DC U NI N Luftfeuchtigkeit / humidity:Class F Betriebstemp. / operating temperature: -40°C - +125°C HP 34401 A für/for I N...............................................................................1,00max.0,30±30%B Elektrische Eigenschaften / electrical properties:25050 HzUnterschrift / signatureKontrolliert / approvedWürth Elektronik.................................................................................................................................................................DATUM / DATE : 2010-05-17max.A Testbedingungen / testconditionsVΩA Mechanische Abmessungen / dimensions :10 kHz / 0,1 mA / 20°CC Lötpad / land pattern.:Umgebungstemperatur / temperature:L O 6,80D Prüfgeräte / test equipment:E Testbedingungen / test conditions:@ 20 °C @ 70 °C UL94 HB It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.G Eigenschaften / general specifications:Sockel / base:Draht / wire:UL94 V-0F Werkstoffe & Zulassungen / material & approvals:Kleber / glue:Freigabe erteilt / general release:Kunde / customerAbstandhalter / spacer:UL94 V-0Würth Elektronik eiSos GmbH & Co. KGGeprüft / checked This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.[mm]description :SBaVersion 22010-05-17BKoVersion 12009-02-17NameÄnderung / modificationDatum / dateH Einfügungsdämpfung / insertion loss:Freigabe erteilt / general release:Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikWürth Elektronik eiSos GmbH & Co. KG.................................................................................................................................................................CURRENT-COMPENSATED CHOKE WE-LF SMDDATUM / DATE : 2010-05-17Unterschrift / signature ............................................................................................................................................Kunde / customer01020304050600,010,1110E i n f üg u n g s d äm p f u n g / i n s e r t i o n l o s s [d B ]Frequenz / frequency [MHz]typischer Dämpfungsverlauf / typical attenuation curveThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.description :Gurtspezifikation / Tape specification:A24mmB4mmC44mma330 ± 2,0mmb21 ± 0,8mmc13 ± 0,5mmd150 ±1,0mme48,4mmf44mm165 to 180°SBa Version 22010-05-17BKo Version 12009-02-17NameÄnderung / modification Datum / date Datum / date Unterschrift / signatureWürth Elektronik.............................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGI Rollenspezifikation / tape and reel specification:Rollenspezifikation / Reel specification: Freigabe erteilt / general release:Kunde / customer..................................................................................CURRENT-COMPENSATED CHOKE WE-LF SMDDATUM / DATE : 2010-05-17............................................................................... ...............................................................................The force for tearing off cover tape is10 to 130 grams in arrow directionfeeding directionØ ca b dA BefCThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.分销商库存信息: WURTH-ELECTRONICS 7446631007。
744325650;中文规格书,Datasheet资料
Bezeichnung :description :A mmB mmC mmD mmE mmF mmG mmMarking = part numberEigenschaften / properties Wert / valueEinheit / unittol.Lerrlaufinduktivität/initial inductance Nenn-Induktivität /rated inductance DC-Widerstand /DC-resistance Nennstrom /rated current Sättigungsstrom/saturation current Eigenres.-Frequenz self-res.-frequency33%Umgebungstemperatur / temperature:+20°CWE-Superflux BD 11-01-11NameDatum / dateÄnderung / modificationVersion 1typ.typ.1,9± 0,54,7± 0,310,2± 0,510,5± 1,0 D Prüfgeräte / test equipment :HP 34401 A & Fluke 54II für/for I DC; Luftfeuchtigkeit / humidity:WAYNE KERR 3260B für/for L 0; I SAT 4,0± 0,53,0± 1,0± 20%5,1± 0,45 A Mechanische Abmessungen / dimensions :100 kHz / 10mA L 06,50µH B Elektrische Eigenschaften / electrical properties :C Lötpad / soldering spec.:max.12,50SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................DATUM / DATE : 2011-01-11± 10%A Testbedingungen / test conditions AIEIW-200Basismaterial / base material:Umgebungstemp. / ambient temperature: -40°C - +100°C F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :Kontrolliert / approvedD T= 50 K A 10,0I N D L/L 0= 30 %8,4Metra HIT 27I für/for R DCI sat SRF27E Testbedingungen / test conditions :Würth Elektronik...............................................................................Arbeitstemperatur / operating temperature: -40°C - +150°C Freigabe erteilt / general release:Kunde / customerDraht / wire: blackcoating:not exceed 150°C under worst case operating conditions.http://www.we-online.deDatum / date.........................................................................Unterschrift / signature MHz100 kHz / 10mA / 8,4AL N 5,00@ 20° C R DC µH m W It is recommended that the temperature of the part does typ.[mm]3,83,854,0EA M a r k i n gCDBFGRDC is measured at these pointsBezeichnung :description :BD 11-01-11NameDatum / dateSPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIDATUM / DATE : 2011-01-11........................................................................................................................................................Freigabe erteilt / general release:Kunde / customer..............................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modification0,001,002,003,004,005,006,007,00246810121416L (µH )Current (A)Induktivität vs Strom (typ.)Inductance vs Current (typ.)Bezeichnung :description :BD 11-01-11NameDatum / dateVersion 1Freigabe erteilt / general release:Kunde / customerGeprüft / checked Kontrolliert / approvedÄnderung / modification........................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik..............................................................................................................................................http://www.we-online.deD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 4000,0010,0020,0030,0040,0050,0060,0070,0080,0090,00100,0002468101214T [ °C ]Current (A)Temperaturanstieg vs. Strom (typ.)/ Temperature rise vs. Current (typ.)Bezeichnung :description :I Rollenspezifikation / tape and reel specification :A 11,3± 0,1mm B16,0± 0,1mm + 0,1- 0,0+ 0,05- 0,05E 4,00± 0,1mmF 2,00± 0,1mmG 1,75± 0,1mmH 11,5± 0,1mmI 10,8± 0,1mmJ 5,40± 0,1mm T 0,35± 0,05mm W24,0± 0,3mma 330,00± 2,0mmb 24,5± 0,8mmc 29,50± 0,5mmd 100,0± 1,5mmBD 11-01-11NameDatum / datemm SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIDATUM / DATE : 2011-01-11........................................................................................................................................................Freigabe erteilt / general release:Kunde / customerVersion 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KG................................................................................................................................................Rollenspezifikation / Reel specification:D 1,55mm Gurtspezifikation / Tape specification:C 1,50Ø cabWEFGA B CØ DHITJ150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.dcb分销商库存信息: WURTH-ELECTRONICS 744325650。
7443556450;中文规格书,Datasheet资料
Bezeichnung :description :Marking = part numberEigenschaften / properties Leerlaufinduktivität/initial inductance DC-Widerstand /DC-resistance 33%Umgebungstemperatur / temperature:+20°CWE-Perm2When exposed to shock and vibration stress, it is recommendedto fix the device by seperate means (such as glue, fasteners, etc).ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / dateVersion 3It is recommended that the temperature of the part does not Luftfeuchtigkeit / humidity:Arbeitstemperatur / operating temperature: -40°C - +125°C G Eigenschaften / general specifications:E Testbedingungen / test conditions:WAYNE KERR 3260B für/for L 0; R DC ; I SAT ; I N7443556450Elektrische Eigenschaften / electrical properties:Kunde / customer :SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIArtikelnummer / part number : http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400exceed 125°C under worst case operating conditions.D Prüfgeräte / test equipment:Umgebungstemp. / ambient temperature: -40°C - +75°CFreigabe erteilt / general release:Draht / wire:Polyamide/Imid coatingBasismaterial / base material: F Werkstoffe & Zulassungen / material & approvals:Würth Elektronik..................................................................................Kunde / customerVersion 1Version 2Geprüft / checked .................................................................................................Änderung / modificationdescription :H Induktivitätskurve / Inductance curve:ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / datePOWER-CHOKE WE-HCIDATUM / DATE : 2009-11-02Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 3Version 2..............................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationdescription :I Temperaturanstieg / Temperature rise curve:ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / dateDATUM / DATE : 2009-11-02Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400....................................................................................................................................................................Datum / dateUnterschrift / signaturehttp://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationSPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIFreigabe erteilt / general release:Kunde / customerWürth ElektronikVersion 3Version 2..............................................................................................................................................description :ME 09-11-08Rst Rst 08-02-18NameDatum / dateVersion 3SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIFreigabe erteilt / general release:Kunde / customer...................................................................................................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationVersion 2.................................................................................The Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7443556450。
74458001;中文规格书,Datasheet资料
33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite MST 04-10-11NameDatum / dateÄnderung / modificationVersion 1Luftfeuchtigkeit / humidity:HP 34401 A für/for I DC und/and R DCHP 4274 A für/for L und/and Q Sockel / BaseAnbindung an Elektrode /Sn/Cu - 99.3/0.7%UL94-V0Endoberfläche / finishing electrode 100% Snhttp://www.we-online.deDatum / date.............................................................................Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ................................................................................................It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Umgebungstemp. / ambient temperature: -40°C - + 85°C Basismaterial / base material:Draht / wire:2UEWF 155°C F Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:D Prüfgeräte / test equipment:E Testbedingungen / test conditions:Betriebstemp. / operating temperature: -40°C - + 125°C soldering wire to platingFreigabe erteilt / general release:Kunde / customerWürth Elektronik..................................................................................description :MST 04-10-11NameDatum / dateÄnderung / modificationVersion 1http://www.we-online.de................................................................................................Geprüft / checked Kontrolliert / approvedWürth ElektronikWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400...............................................................................................................................................................Datum / dateUnterschrift / signature DATUM / DATE : 2004-10-11H Induktivitätskurve / Inductance curve:Freigabe erteilt / general release:Kunde / customerPOWER-CHOKE WE-PD 4description :MST 04-10-11NameDatum / dateVersion 1http://www.we-online.deGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationWürth Elektronik...............................................................................................................................................................................................................................................................Datum / dateUnterschrift / signature Freigabe erteilt / general release:Kunde / customerPOWER-CHOKE WE-PD 4The force for tearing off cover tape is20 to 70 grams in arrow directionfeeding directionThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such asaerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when use electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage分销商库存信息: WURTH-ELECTRONICS 74458001。
74477030;中文规格书,Datasheet资料
Bezeichnung :description := Start of winding Marking = Inductance code33% Umgebungstemperatur / temperature:+20°C100% SnMST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27MST 02-02-20NameDatum / dateIt is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Anbindung an Elektrode / soldering wire to plating:Sn/Ag/Cu - 96.5/3.0/0.5%Draht / wire:2SFBW 155°CUmgebungstemp. / ambient temperature: -40°C - + 85°C Freigabe erteilt / general release:Kunde / customerWürth Elektronik....................................................................................................................................................................Unterschrift / signature Ferrit/ferrite F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :D Prüfgeräte / test equipment :E Testbedingungen / test conditions :Basismaterial / base material:Betriebstemp. / operating temperature: -40°C - + 125°C D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ..........................................................................................................................Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KG74477030SPEICHERDROSSEL WE-PDPOWER-CHOKE WE-PDArtikelnummer / part number : Luftfeuchtigkeit / humidity:HP 4274 A für/for L und/and Q HP 34401 A für/for I DC und/and R DCÄnderung / modificationVersion 1Version 2Version 3Version 4Version 5 Datum / dateEndoberfläche / finishing electrode:• MarkingRoHS compliantLFdescription :MST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27MST 02-02-20NameDatum / dateH Induktivitätskurve / Inductance curve :POWER-CHOKE WE-PDDATUM / DATE : 2004-10-11Kontrolliert / approvedDatum / dateUnterschrift / signature Würth ElektronikWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer..................................................................................................................................................................................................................................................................................Geprüft / checked Version 4Version 5Änderung / modificationVersion 1Version 2Version 3a 330,0± 0,5mmb 20,20± 0,2mm+ 0,5- 1,0d 100,0± 0,2mmMST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27MST 02-02-20NameDatum / dateRollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customerc 13,00mm....................................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik..........................................................................................................................Würth Elektronik eiSos GmbH & Co. KGGeprüft / checked Kontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationVersion 1Version 2Version 3Version 4Version 5The force for tearing off cover tape is 10 to 130 grams in arrow direction165 to 180°feeding directionThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.分销商库存信息: WURTH-ELECTRONICS 74477030。
744841330;中文规格书,Datasheet资料
Bezeichnung :description :33%+25°C1500 V, 50 Hz 5mA, 2 sec.MSTVersion 105-12-27Name Änderung / modificationDatum / dateWürth Elektronik..................................................................................UL94V-2Abstandhalter / spacer:Freigabe erteilt / general release:Kunde / customerUL94V-0Kleber / glue:It is recommended that the temperature of the part does ..................................................................................F Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :D Prüfgeräte / test equipment :Datum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Class F Betriebstemp. / operating temperature: -40°C - + 125°C Spezifikation für Freigabe / specification for releaseKunde / customer :STROMKOMP. DROSSEL WE-CMB "NiZn"COMMON MODE CHOKE WE-CMB "NiZn"Artikelnummer / part number :744841330Übertemperatur / temperature rise: < 55 K FLUKE PM 6306 für/for L 0/L N E Testbedingungen / test conditions :Luftfeuchtigkeit / humidity:not exceed 125°C under worst case operating conditions.HP 34401 A für/for I N und/and R DCKlimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire: Umgebungstemperatur / temperature: Prüfspannung / testing voltageRoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electroniccomponent in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744841330。
744878002;中文规格书,Datasheet资料
description :A mmB mmC mmD mmE mm FmmEigenschaften / properties Wert / valueEinheit / unittol.Induktivität (je Wicklg.) /inductance (each wdg.)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg)Nennstrom (je Wicklg.) /rated Current (each wdg.)Sättigungsstrom (je Wicklg.) /saturation current (each wdg.)Eigenres.-Frequenz /self-res.-fequency Nennspannung /rated voltage33%+20°CFerrit/ ferrite OO 09-09-01NameDatum / dateA typ.max.V80Draht / wire:max. D Prüfgeräte / test equipment :E Testbedingungen / test conditions :HP 34401 A für/for I DC und/and R DCUmgebungstemperatur / temperature:Betriebstemp. / operating temperature: -40°C - + 125°C I N1,I N20,042A Basismaterial / base material: F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :U DCΩI sat typ.HP 4274 A für/for L und/and Q max.SRF MHz 3,60It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions................................................................................................................................Freigabe erteilt / general release:Kunde / customer.................................................Datum / date..................................................................................Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked max.Testbedingungen / test conditions 0,052±20% B Elektrische Eigenschaften / electrical properties :Umgebungstemp. / ambient temperature: -40°C - + 85°C 53ΔT = 40 K 2 SFBW; 155°CPOWER-CHOKE WE-DDµH R DC1,2L 1,L 2 A Mechanische Abmessungen / dimensions :1 kHz / 0,25V@ 20°2,4ΩR DC1,2|ΔL/L|<10%4,80DATUM / DATE : 2009-09-014,0 ± 0,22,7 ± 0,11,0 ± 0,1@ 20°4,0 max.7,3 ± 0,4 Luftfeuchtigkeit / humidity:Würth ElektronikTyp SC Lötpad / soldering spec.:Änderung / modificationVersion 1A BCD E2314Av v v vv v v v142 L13 L2StartFinish[ mm ]0,83,12,22,21,0description :OO 09-09-01NameDatum / date.................................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationVersion 1Freigabe erteilt / general release:Kunde / customer..................................................................................................................................................................Würth ElektronikDatum / dateUnterschrift / signaturePOWER-CHOKE WE-DDDATUM / DATE : 2009-09-01H Induktivitätskurve / Inductance curve:0,000,501,001,502,002,500,01,02,03,04,05,06,07,08,09,0L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 9,00± 0,1mmB 16,0± 0,2mm + 0,1- 0,0D 4,00± 0,1mmE 2,00± 0,1mm F 9,00± 0,1mm G3,50± 0,1mma 330,0 ± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mm d 100,0± 1,0mmOO 09-09-01NameDatum / date.................................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modification..................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customerDATUM / DATE : 2009-09-01mm 1,50C POWER-CHOKE WE-DDGurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Version 1Ø cadbABED øC FGThe force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744878002。
7446632001;中文规格书,Datasheet资料
description :Gehäuse / case: SHA 23,3 max.mmB 18,5 max.mmC 11,5 max.mmD 10,0 ± 0,2mmE 5,0 ± 0,2mmF 19,6 ± 0,3mmG 2,1 ± 0,1mm H0,4 typ.mmEigenschaften / propertiesWert / valueEinheit / unittol.Leerlauf-Induktivität /inductanceDC-Widerstand /DC-resistance Nennstrom /rated current Nennspannung /rated voltage33%+20°CPrüfspannung / testing voltage1500 V, 50 Hz 5mA, 2 sec.SBaVersion 22010-05-17BKo Version 12009-02-17NameÄnderung / modificationDatum / dateÜbertemperatur / temperature rise: < 55 KKlimabeständigkeit/ climatic class: 40/125/21.............................................................Datum / dateCURRENT-COMPENSATED CHOKE WE-LF SMDmH R DC WAYNE KERR WK3260B/WK3265für/for L 0 und/and R DC U NI N Luftfeuchtigkeit / humidity:Class F Betriebstemp. / operating temperature: -40°C - +125°C HP 34401 A für/for I N...............................................................................2,00max.0,06±30%B Elektrische Eigenschaften / electrical properties:25050 HzUnterschrift / signatureKontrolliert / approvedWürth Elektronik.................................................................................................................................................................DATUM / DATE : 2010-05-17max.A Testbedingungen / testconditionsVΩA Mechanische Abmessungen / dimensions :100 kHz / 0,1 mA / 20°CC Lötpad / land pattern.:Umgebungstemperatur / temperature:L O 1,00D Prüfgeräte / test equipment:E Testbedingungen / test conditions:@ 20 °C @ 70 °C UL94 HB It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.G Eigenschaften / general specifications:Sockel / base:Draht / wire:UL94 V-0F Werkstoffe & Zulassungen / material & approvals:Kleber / glue:Freigabe erteilt / general release:Kunde / customerAbstandhalter / spacer:UL94 V-0Würth Elektronik eiSos GmbH & Co. KGGeprüft / checked This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.[mm]description :SBaVersion 22010-05-17BKoVersion 12009-02-17NameÄnderung / modificationDatum / dateH Einfügungsdämpfung / insertion loss:Freigabe erteilt / general release:Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikWürth Elektronik eiSos GmbH & Co. KG.................................................................................................................................................................CURRENT-COMPENSATED CHOKE WE-LF SMDDATUM / DATE : 2010-05-17Unterschrift / signature ............................................................................................................................................Kunde / customer01020304050600,010,1110E i n f üg u n g s d äm p f u n g / i n s e r t i o n l o s s [d B ]Frequenz / frequency [MHz]typischer Dämpfungsverlauf / typical attenuation curveThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.description :Gurtspezifikation / Tape specification:A24mmB4mmC44mma330 ± 2,0mmb21 ± 0,8mmc13 ± 0,5mmd150 ±1,0mme48,4mmf44mm165 to 180°SBa Version 22010-05-17BKo Version 12009-02-17NameÄnderung / modification Datum / date Datum / date Unterschrift / signatureWürth Elektronik.............................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGI Rollenspezifikation / tape and reel specification:Rollenspezifikation / Reel specification: Freigabe erteilt / general release:Kunde / customer..................................................................................CURRENT-COMPENSATED CHOKE WE-LF SMDDATUM / DATE : 2010-05-17............................................................................... ...............................................................................The force for tearing off cover tape is10 to 130 grams in arrow directionfeeding directionØ ca b dA BefCThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body.In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.分销商库存信息: WURTH-ELECTRONICS 7446632001。
7448640414;中文规格书,Datasheet资料
description :Gehäuse / case: UTA 21,2 max mmB 16,6 max mmC 22,5 max mmD 13,0 ± 0,2mmE 10,0 ± 0,2mmF 4,5 max mm ø0,8 typmmEigenschaften /propertiesWert / valueEinheit / unittol.Leerlauf-Induktivität /inductanceDC-Widerstand /DC-resistance Nennstrom /rated current Nennspannung /rated voltage33%20 °C2000 V,50 HzHasAVersion 211-09-01MST Version 109-08-06NameÄnderung / modificationDatum / dateWAYNE KERR WK3260B/WK3265 für/for L 0 und/and R DC Klimabeständigkeit/ climatic class: 40/125/21 Datum / date............................................................................. A Mechanische Abmessungen / dimensions :10 kHz / 100 mV / 20°C B Elektrische Eigenschaften / electrical properties:25050 HzmHR DC VCURRENT-COMPENSATED CHOKE WE-FCKern / coreP155 IEC317-20Betriebstemp. / operating temperature: -25°C - + 125°C Übertemperatur / temperature rise: < 55 K L O 6,80 D Prüfgeräte / test equipment:E Testbedingungen / test conditions:@ 20 °C@ 70 °CDATUM / DATE : 2011-09-01±15%A Testbedingungen / test conditions 0,700,47minC Schaltbild / schematic:Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ..........................................................................................................................................Prüfspannung / isolation voltageU NI N Luftfeuchtigkeit / humidity:HP 34401 A für/for INUmgebungstemperatur / temperature:Würth Elektronik..................................................................................G Eigenschaften / general specifications:Gehäuse / case:Freigabe erteilt / general release:Kunde / customerDraht / wire:UL94V-0 F Werkstoffe & Zulassungen / material & approvals:MnZn-Ferrite / MnZn ferriteIt is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and reliability isespecially required or if there is the possibility of direct damage or injury to human body, for example in the range of aero space, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.1 2N134N21 2 34HasAVersion 211-09-01MST Version 109-08-06NameÄnderung / modificationDatum / dateGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400H Einfügungsdämpfung / insertion loss:Geprüft / checkedKontrolliert / approvedDatum / date ..................................................................................= = = = =common modeThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aero space, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, W ürth Elektronik eiSos GmbH must be informed before the design -in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used i n electrical circuits that require high safety and reliability functions or performance.Bezeichnung :description :..................................................................................HasAVersion 211-09-01..................................................................................MSTVersion 109-08-06Name Änderung / modificationDatum / dateKunde / customer..................................................................................Geprüft / checkedSTROMKOMPENSIERTE DROSSEL WE-FC Datum / dateKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co. KGUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:CURRENT-COMPENSATED CHOKE WE-FC..................................................................DATUM / DATE : 2011-09-01I Stangenspezifikation / tube specification:This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating thi s component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aero space, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, W ürth Elektronik eiSos GmbH must be informed before the design -in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used i n electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7448640414。
744314850;中文规格书,Datasheet资料
Bezeichnung :description :A mmB mmC mmD mmE mmF mmG mmHumMarking = part numberEigenschaften / properties Wert / valueEinheit / unittol.Lerrlaufinduktivität/initial inductance Nenn-Induktivität /rated inductance DC-Widerstand /DC-resistance Nennstrom /rated current Sättigungsstrom/saturation current Eigenres.-Frequenz self-res.-frequency33% Umgebungstemperatur / temperature:+20°CWE-Superflux ME 09-08-07NameDatum / dateÄnderung / modificationVersion 13,45 ± 0,32,5 ± 0,31,2 ± 0,34,8 +0,2/-0,36,9 ± 0,37,0 ± 0,3 E Testbedingungen / test conditions :A 4,5typ.@ 20° C µH R DC I N m T= 50 K 100 kHz / 0,1A / 4,0 AL N 6,80µH A Mechanische Abmessungen / dimensions :100 kHz / 0,1A L 08,50± 1001,8 ± 0,3typ.32,50± 20%POWER-CHOKE WE-HC ID-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................DATUM / DATE : 2009-08-07± 10%A Testbedingungen / test conditions 4,0Basismaterial / base material:Draht / wire: AIEIW-200 D Prüfgeräte / test equipment :http://www.we-online.deDatum / date.........................................................................Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGHP 34401 A & Fluke 54II für/for I DC; Luftfeuchtigkeit / humidity:WAYNE KERR 3260B für/for L 0; I SAT C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties :...............................................................................G Eigenschaften / general specifications :not exceed 150°C under worst case operating conditions.It is recommended that the temperature of the part does coating:blackUmgebungstemp. / ambient temperature: -40°C - +100°C L/L 0= 30 %I sat 44MHztyp.Würth Elektroniktyp.Arbeitstemperatur / operating temperature: -40°C - +150°C Metra HIT 27I für/for R DCFreigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvals :SRF[mm]2,22,72,4EA M a r k i n gCDBFGRDC is measured at these pointsHdescription :ME 09-08-07NameDatum / datePOWER-CHOKE WE-HC IDATUM / DATE : 2009-08-07........................................................................................................................................................Freigabe erteilt / general release:Kunde / customer......................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modification0,001,002,003,004,005,006,007,008,009,0024681012L (µH )Current (A)Induktivität vs Strom (typ.)Inductance vs Current (typ.)description :ME 09-08-07NameDatum / datehttp://www.we-online.deGeprüft / checkedKontrolliert / approvedÄnderung / modification........................................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Datum / dateUnterschrift / signature Freigabe erteilt / general release:Kunde / customerWürth Elektronik..............................................................................................................................................0,0010,0020,0030,0040,0050,0060,0070,0080,0090,00100,00110,00120,00130,0001234567T [ °C ]Current (A)Temperaturanstieg vs. Strom (typ.)/ Temperature rise vs. Current (typ.)Bezeichnung :description :I Rollenspezifikation / tape and reel specification :A 7,3± 0,1mmB 12,0± 0,1mm + 0,1- 0,0E 4,0± 0,1mm F 2,0± 0,1mm G 1,75± 0,1mm I 7,6± 0,1mm J 5,2± 0,1mm W16,0± 0,3mma 330,0± 2,0mmb 21,0± 0,8mmc 13,00± 0,5mmd 100,0± 1,5mmME 09-08-07NameDatum / dateSPEICHERDROSSEL WE-HC I POWER-CHOKE WE-HC IDATUM / DATE : 2009-08-07D 1,5mm Rollenspezifikation / Reel specification:Gurtspezifikation / Tape specification:C1,5mm min.........................................................................................................................................................Freigabe erteilt / general release:Kunde / customer........................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGØ cadbWEFGA B CØ DHITJThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744314850。
744323150;中文规格书,Datasheet资料
Bezeichnung :description :Marking = part numberEigenschaften /properties Lerrlaufinduktivität/initial inductance Nenn-Induktivität /rated inductance 33%Umgebungstemperatur / temperature:+20°CWE-Superflux RST 08-08-23NameDatum / dateÄnderung / modificationVersion 1Luftfeuchtigkeit / humidity:E Testbedingungen / test conditions :WAYNE KERR 3260B für/for L 0; R DC ; I SAT ; I ND Prüfgeräte / test equipment :Elektrische Eigenschaften / electrical properties :SPEICHERDROSSEL WE-HC I POWER-CHOKE WE-HC I.................................................................................................AIEIW-200Basismaterial / base material:Umgebungstemp. / ambient temperature: -40°C - +100°C Draht / wire: It is recommended that the temperature of the part does Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :Würth Elektronik..................................................................................Arbeitstemperatur / operating temperature: -40°C - +150°C Freigabe erteilt / general release:Kunde / customerblackcoating:not exceed 150°C under worst case operating conditi ons.http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureBezeichnung :description :H Induktivitätskurve / Inductance curve :RST 08-08-23NameDatum / dateSPEICHERDROSSEL WE-HC I POWER-CHOKE WE-HC IDATUM / DATE : 2008-08-23Freigabe erteilt / general release:Kunde / customer.............................................................Version 1....................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KG.................................................................................Bezeichnung :description :I Temperaturanstieg / Temperature rise curve :RST 08-08-23NameDatum / dateVersion 1SPEICHERDROSSEL WE-HC I POWER-CHOKE WE-HC IFreigabe erteilt / general release:Kunde / customerGeprüft / checked Kontrolliert / approvedÄnderung / modification....................................................................................................................................................................Datum / dateUnterschrift / signatureWürth Elektronik..............................................................................................................................................http://www.we-online.deD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co. KGBezeichnung :description :RST 08-08-23NameDatum / dateSPEICHERDROSSEL WE-HC I POWER-CHOKE WE-HC IFreigabe erteilt / general release:Kunde / customer....................................................................................................................................................................................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGØ cThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744323150。
744373240047;中文规格书,Datasheet资料
1.2 1.1 1.02012-06-282012-02-292011-10-01SStSStSStSStBDBDWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Inductance vs. Current Characteristics: F Typical Temperature rise vs. Current Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-LHMIof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the iron powder material of the core could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744373240047。
744821240;中文规格书,Datasheet资料
Bezeichnung :description :33%+25°C1500 V, 50 Hz 5mA, 2 sec.MSTVersion 104-10-11Name Änderung / modificationDatum / dateWürth Elektronik.........................................................................UL94V-2Abstandhalter / spacer:Freigabe erteilt / general release:Kunde / customerUL94V-0Kleber / glue:It is recommended that the temperature of the part does ...........................................................................F Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :D Prüfgeräte / test equipment :Datum / date...........................................................................Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked 2UEWF (155°C)Betriebstemp. / operating temperature: -40°C - + 125°C Spezifikation für Freigabe / specification for releaseKunde / customer :STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMBArtikelnummer / part number :744821240Übertemperatur / temperature rise: < 55 K FLUKE PM 6306 für/for L 0/L N E Testbedingungen / test conditions :Luftfeuchtigkeit / humidity:not exceed 125°C under worst case operating conditions.HP 34401 A für/for I N und/and R DCKlimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire: Umgebungstemperatur / temperature: Prüfspannung / testing voltageRoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electroniccomponent in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744821240。
744776333;中文规格书,Datasheet资料
Bezeichnung :description :E Testbedingungen / test conditions :Luftfeuchtigkeit / humidity:33% Umgebungstemperatur / temperature:+20°CG Eigenschaften / general specifications :FerritBetriebstemp. / operating temperature: -40°C - + 125°C Umgebungstemp. / ambient temperature: -40°C - + 85°C It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.MSTVersion 204-10-11MST Version 104-06-18NameÄnderung / modificationDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Kunde / customerFreigabe erteilt / general release:Würth Elektronik eiSos GmbH & Co. KGDatum / dateF Werkstoffe & Zulassungen / material & approvalsDraht / wire:2SFBW; 155°CBasismaterial / base material:744776333AS-Interface Drossel AS-Interface ChokeArtikelnummer / part number :Spezifikation für Freigabe / specification for releaseKunde / customer :Kontrolliert / approvedGeprüft / checked HP 4274 A für/for L, C und/and Q HP 34401 A für/for R DC und I DCD Prüfgeräte / test equipment :........................................................................................................................................................................................................................................Würth Elektronik..........................................................................Unterschrift / signature RoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electroequipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744776333。
744779068;中文规格书,Datasheet资料
9.0 8.02012-08-272011-08-04SStCZCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]C Schematic:F Typical Inductance vs. Current Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TISof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.•Due to heavy weight of the components of size 1014, strong forces and high accelerations might have the effect to damage the electrical connection or to harm the circuit board and will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744779068。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
description := Start of winding Marking = Inductance code33% Umgebungstemperatur / temperature:+20°C100% SnSSt 06-01-10MST 04-10-11SST 04-07-28SST04-04-21SST 04-04-08NameDatum / datenot exceed 125°C under worst case operating conditions.Draht / wire:2SFBW; 155°POWER-CHOKE WE-PD.............................................Umgebungstemp. / ambient temperature: -40°C - + 85°C Basismaterial / base material: Endoberfläche / finishing electrode:D Prüfgeräte / test equipment :E Testbedingungen / test conditions :HP 4274 A für/for L und/and Q F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :Ferrit/ferrite HP 34401 A für/for I DC und/and R DCLuftfeuchtigkeit / humidity:Freigabe erteilt / general release:Kunde / customerAnbindung an Elektrode / soldering wire to plating:Betriebstemp. / operating temperature: -40°C - + 125°C It is recommended that the temperature of the part does Sn/Ag/Cu - 96.5/3.0/0.5%Würth Elektronik................................................................................Datum / date................................................................................Unterschrift / signatureVersion 5Änderung / modificationVersion 1Version 2Version 3Version 4 http://www.we-online.deKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ...................................................description :H Induktivitätskurve / Inductance curve :SSt 06-01-10MST 04-10-11SST 04-07-28SST04-04-21SST 04-04-08NameDatum / datePOWER-CHOKE WE-PDDATUM / DATE : 2006-01-10Würth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.de................................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customer................................................................................................................................................................Änderung / modificationVersion 1Version 2Version 3Version 4Version 5description :A 10,0± 0,1B 16,0± 0,2+ 0,1a 330,0± 2,0mm b 21,0± 0,8mm c 13,0± 0,5mm d 100,0± 1,0mm SSt 06-01-10MST 04-10-11SST 04-07-28SST04-04-21SST 04-04-08NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.dePOWER-CHOKE WE-PDDATUM / DATE : 2006-01-10Würth ElektronikGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KG................................................................................................Änderung / modificationVersion 1Version 2Freigabe erteilt / general release:Kunde / customerDatum / dateUnterschrift / signature ................................................................................................................................................................Rollenspezifikation / Reel specification:Version 3Version 4Version 51,50C Gurtspezifikation / Tape specification: The force for tearing off cover tape is 10 to 130 grams in arrow directionfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7447789004。