德国 AZ 标准衬里旋塞阀样本

The non-porous, extremely resistant lining is achieved by a special production method of AZ-Armaturen. This production method guarantees the exclusion of pores, microcracks and flaking. The thickness of the lining layer is min. 3 mm. Only virginresin granulate is used, no regenerated material or similar.
ØD Øk Ød4 DN
H R
Type “Standard A”
Plug Valve with chemical resistant, vacuum-proof lining
N
A
b L
f R
f b
L
Installation dimensions for AZ- Flange Valves, Type “Standard A”
Designs F-2, F-3-Standard, F-3-W, (F-4, F-5 on request) see leaflets 1.1 - 1.4 also fully jacketed available, see leaflet 1.5
Plug Forms see leaflet 1.3 and 1.4
Plug Valve with chemical resistant, vacuum-proof lining
Lined 3-way valve with vertical third entry and safety sealing type “CA-S” “F-3-Standard-A”
Lined 3-way valve with horizontal third entry “F-3-A-W”
Lining Material Body: PFA, PFA-conductive, FEP, PVDF Plug: PTFE, PFA, PFA-conductive, FEP, PVDF Any plug and body material can be combined.
Type “Standard A”
Sizes DIN DN15 - DN300 ANSI 1/2” - 12”
Temperature - Range -40°C to +200°C
Ratings max. PN40 or 300lbs vacuum-proof see enclosed P-T-diagramm
Safety Sealings In order to achieve an additional safety sealing to the outside for very dangerous fluids, we recommend our special stuffing box design type “CA-S” (see leaflet 5.4)
Safety Sealing-“CA-S” *
* incl. 100% safety break off torque for F-3 and F-3-W on request
body / plug
Only 1.4408 or Low Temperature Carbon Steel
vacuum-proof
Type “Standard A”
Plug Valve with chemical resistant, vacuum-proof lining
F-2-Standard-A
Safety Sealing-“CA”
stuffing box ring cover PTFE - silk packing stainless steel - thrust ring PTFE - diaphragm stainless steel - diaphragm PTFE - diaphragm lining
TYPE “Standard A”
Plug Valve with chemical resistant, vacuum-proof lining
ARMATUREN
totraumfrei und wartungslos
2.1
cavity free maintenance free, self-lubricating chemical resistant vacuum-proof Tmax = 210°C easy accessible adjustment of the plug type approval TÜ. AGG 105-90 face to face dimensions acc. to DIN and ANSI “TA - Luft 2002” approval
Hale Waihona Puke Baidu
Face to Face Dimensions DIN and ANSI, see leaflets 1.1 and 1.2 JIS and British Standard on request.
Core Materials Body:
ductile iron / GGG40.3, WCB / GS-C25, 1.1138, 1.4408 Plug: up to DN100 / 4” = 1.4408 from DN125 / 5” = GS-C25 special materials on request plugs without lining in special materials like Titanium, Monel, Hastelloy C, ceramics etc. on request.
GGG40.3 / EN JS - 1049
Note: The a.m. values depend on the application (medium). Higher pressure-temperature resistance e.g. PN40, on request
Order Example: F-3-A-W-DN25-PN16-GGG40.3-PFA-PTFE F = flange, 3 = threeway, A = Type, W = horizontal third end DN25 = size, PN16 = rating, GGG40.3 = body material, PFA = body lining, PTFE = plug lining
ARMATUREN e-mail: info@az-armaturen.de
totraumfrei und wartungslos http://www.az-armaturen.de
ØD Øk Ød4 L2*
H
2.1.11.04-2-E Subject to technical change without notice
* 3-way-valve dimensiones see leaflet 1.3
AZ-Armaturen GmbH D-78087 Mönchweiler Waldstraße 7 Telefon +49 (0)7721 7504-0 Telefax +49 (0)7721 7504-13