扭力测试作业指导书
合集下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
扭力测试标准Torsion Test Standarder
》
B22、E27灯头用2牛顿/米的力作反旋测试（即cm的力作反旋测试）；
B22 and E27 lamp holder instead turns on lathe the test with 2 Newton/rice's devoting . the cm devoting instead to turn on lathe test);
测试判定Test to determine
通过以上测试后，如灯头松动、破损、灯身主体松动则判定扭力测试不合格，反之则合格。
—
The above tests, such as lamp cap loose, damaged, the lights of the main body was found loose torque tests fail otherwise qualified.
适用范围Scope
所有使用B22、E27、B15、E14灯头之欧规灯具产品。
All the use of B22, E27, B15, E14 lamp lighting products of the EU
Regulation
测试仪器/工具Testing Equipments / Tools
扭力测试仪、适配灯头之夹头。
编 写人
审核人
批准人
编写日期
审核日期
！
批准日期
测试步骤 Testing Step
使Fra Baidu bibliotek前由测试人员或品保以及其他相关人员依照测试标准要求调整扭力数值；
By the use of pre-testing or quality assurance personnel and other related personnel in accordance with the standard test for adjustment of the torque values;
Each product in mass production when the random testing 3PCS
测试单位及权责说明 Test Unit and Power and Responsibility Explanation
。
由巡检QC依照标准调整扭力数值后执行扭力测试，并负责将测试数据填写于质量记录表中。
By inspects QC after the standard adjustment torsion value carries out the torsion test, and will be responsible for test data filling in the quality data sheet.
将对应之夹头安装在灯头上。
Chuck will be installed in the corresponding lamp on
将扭力计与夹头进行连接，然后用手抓住扭力计旋柄进行反旋测试。
To connect torsion rate with chuck, and thentake hold of the torsion rate handle do the anti-rotation handle Rotary test with hand.
使用时机 The use of time
欧规产品：EU Regulation Production
每款产品的首件确认时测试。
Each product for the first items should be do the comfirmation test.
每款产品在批量生产时随意抽取3PCS测试。
E14、B15灯泡用牛顿/米的力作反旋测试（即cm的力作反旋测试）。
E14 and B15 lamp holder instead turns on lathe the test with Newton/rice's devoting . the cm devoting instead to turn on lathe test).
目的Purpose
防止灯体结构松动，客人在装卸灯具时，引起其它安规问题。
To prevent the lamp structure loose category in the handling of the guests when the issues arising from other safety regulations.
》
B22、E27灯头用2牛顿/米的力作反旋测试（即cm的力作反旋测试）；
B22 and E27 lamp holder instead turns on lathe the test with 2 Newton/rice's devoting . the cm devoting instead to turn on lathe test);
测试判定Test to determine
通过以上测试后，如灯头松动、破损、灯身主体松动则判定扭力测试不合格，反之则合格。
—
The above tests, such as lamp cap loose, damaged, the lights of the main body was found loose torque tests fail otherwise qualified.
适用范围Scope
所有使用B22、E27、B15、E14灯头之欧规灯具产品。
All the use of B22, E27, B15, E14 lamp lighting products of the EU
Regulation
测试仪器/工具Testing Equipments / Tools
扭力测试仪、适配灯头之夹头。
编 写人
审核人
批准人
编写日期
审核日期
！
批准日期
测试步骤 Testing Step
使Fra Baidu bibliotek前由测试人员或品保以及其他相关人员依照测试标准要求调整扭力数值；
By the use of pre-testing or quality assurance personnel and other related personnel in accordance with the standard test for adjustment of the torque values;
Each product in mass production when the random testing 3PCS
测试单位及权责说明 Test Unit and Power and Responsibility Explanation
。
由巡检QC依照标准调整扭力数值后执行扭力测试，并负责将测试数据填写于质量记录表中。
By inspects QC after the standard adjustment torsion value carries out the torsion test, and will be responsible for test data filling in the quality data sheet.
将对应之夹头安装在灯头上。
Chuck will be installed in the corresponding lamp on
将扭力计与夹头进行连接，然后用手抓住扭力计旋柄进行反旋测试。
To connect torsion rate with chuck, and thentake hold of the torsion rate handle do the anti-rotation handle Rotary test with hand.
使用时机 The use of time
欧规产品：EU Regulation Production
每款产品的首件确认时测试。
Each product for the first items should be do the comfirmation test.
每款产品在批量生产时随意抽取3PCS测试。
E14、B15灯泡用牛顿/米的力作反旋测试（即cm的力作反旋测试）。
E14 and B15 lamp holder instead turns on lathe the test with Newton/rice's devoting . the cm devoting instead to turn on lathe test).
目的Purpose
防止灯体结构松动，客人在装卸灯具时，引起其它安规问题。
To prevent the lamp structure loose category in the handling of the guests when the issues arising from other safety regulations.