Honeywell AWM3000传感器
品牌：Honeywell 产品名：HMR3000 型号：HHMR3000 品牌型号说明书
Digital Compass Solution HMR3000The Honeywell HMR3000 is a digital compass module that provides heading, pitch, and roll outputs for navigation. Three Honeywell’s magneto -resistive sensors are oriented in orthogonal directions to measure the vector components of earth’s magnetic field. A fluid tilt sensor is employed to determine a gravitational reference. These solid-state sensors create a strapdown compass that is both rugged and reliable. The data output is serial full-duplex RS-232 or half-duplex RS-485 with 1200 to 19,200 data rates.Applications include: Compassing & Navigation, Dead Reckoning Backup to GPS Systems, Marine Navigation, Antenna Positioning, and Land SurveyingA RS-232 development kit version is available that includes a windows compatible demo program (does not work with RS-485 devices), interface cable, AC adapter and carrying case.Honeywell continues to maintain product excellence and performance by introducing innovative solid-state magnetic sensor solutions. These are highly reliable, top performance products that are delivered when promised. Honeywell’s magnetic sensor solutions provide real solutions you can count on.FEATURES & BENEFITS BLOCK DIAGRAMHigh Accuracy, <0.5° with 0.1° ResolutionWide Tilt Range of ±40° Up to 20 Updates per Second NMEA Standard Sentence Outputs Hard Iron Calibration RoutineRS-232 or RS-485 Serial Data Interfaces PCB or Aluminum Enclosure Options6-15 volt DC Unregulated Power SupplyInterfaceHMR3000SPECIFICATIONSPower SupplyTemperature(2) Tested at 25°C except stated otherwise.(3) Characterized(4) Parts stationary for 24 hours before testing(5) The HMR3000 Demo Kit is not available with the RS-485 interface because the software does not support half-duplex protocol2 HMR3000 3PIN CONFIGURATION(1) Power input shall only be applied to either Pin 8 (+5VDC) or Pin 9 (Unregulated +6 to+15VDC).(2) Exceeding the voltage specifications for Pin 8 may damage the HMR3000.RS-232 UNBALANCED I/O INTERCONNECTSRS-485 BALANCED I/O INTERCONNECTSHMR3000HOST PCHOST PCHMR3000HMR3000DATA COMMUNICATIONSThe HMR3000 serial communications are governed by a simple asynchronous, ASCII protocol modeled after the NMEA0183 standard. Either an RS-232 or an RS-485 electrical interface can be ordered. ASCII characters are transmitted and received using 1 start bit, 8 data bits (LSB first), no parity (MSB always 0), and 1 stop bit; 10 bits total per character. Thebaud rate defaults to 19,200 and can be reconfigured to 1200, 2400, 4800, 9600, 19200, 38400 bits per second. TheHMR3000 supports both standard NMEA 0183 and proprietary messages. Unsolicited NMEA messages are sent by theHMR3000 in Continuous Mode at the rates programmed in the EEPROM. HMR3000 also responds to all input messagesfrom the host. An HMR3000 response to a command input may be delayed due to transmission of an unsolicited output.The host computer must wait for HMR3000 to respond to the last command input before sending another command message. All communication from and to HMR3000 contain a two-character Checksum Field at the end of the data fields,and are denoted in the sentences by ‘hh’. The checksum assures the accuracy of the message transmitted. This checksumis also calculated per NMEA 0183 Standard.The RS-232 signals are single-ended undirectional levels that are sent received simultaneously (full duplex). One signal isfrom the host personal computer (PC) transmit (TD) to the HMR3000 receive (RD) data line, and the other is from theHMR3000 TD to the PC RD data line. When a logic one is sent, either the TD or RD line will drive to about +6 Volts referenced to ground. For a logic zero, the TD or RD line will drive to about –6 Volts below ground. Since the signals are transmitted and dependent on an absolute voltage level, this limits the distance of transmission due to line noise and signalto about 60 feet.When using RS-485(1), the signals are balanced differential transmissions sharing the same lines (half-duplex). This meansthat logic one the transmitting end will drive the B line at least 1.5 Volts higher than the A line. For a logic zero, the transmitting end will drive the B line at least 1.5 Volts lower than the A line. Since the signals are transmitted as difference voltage level, these signals can withstand high noise environments or over very long distances where line loss may be a problem; up to 4000 feet. Note that long RS-485 lines should be terminated at both ends with 120-ohm resistors.Specific measurement descriptions and interface commands are not included in this datasheet but are included in the companion HMR3000 User’s Guide document.(1) Demonstration software for the HMR3000 does not support the RS-485(half-duplex) protocol. The software is onlyavailable with the RS-232 interface.CIRCUIT DESCRIPTIONThe HMR3000 Digital Compass Module contains all the basic sensors and electronics to provide digital indication of headingand tilt. The HMR3000 has all three axis of magnetic sensors on the far end of the printed circuit board, away from the connector interface. The HMR3000 uses the circuit board mounting holes or the enclosure surfaces as the reference mechanical directions. The complete HMR3000 PCB assembly consists of a mother board and the 9-pin D-connector.The HMR3000 circuit starts with the Honeywell HMC1001 1-Axis Magnetic Sensor and the HMC1002 2-Axis Magnetic Sensor elements to provide the X, Y, and Z axis magnetic sensing of the earth’s field. These sensor output voltages arethen amplfied and converted to a digital representation. A microcontroller integrated circuit receives the digitized magneticfield values (readings) by periodically querying the Analog to Digital Converter (ADC) and performs the necessary offsetvalue corrections provided by the EEPROM via the calibration routine. This microcontroller also performs the external serialdata interface and other housekeeping functions. The onboard EEPROM integrated circuit also is employed to retain necessary setup variables for best performance.A liquid filled two-axis (pitch, roll) tilt sensor is also used to create tilt compensated heading data. This tilt sensor performsan electronic gimballing function and is normally mounted flat (PCB horizontal) for maximum tilt range.4 HMR3000APPLICATIONS PRECAUTIONSSeveral precautions should be observed when using magnetic compasses in general:∙The presence of ferrous materials, such as nickel, iron, steel, and cobalt near the magnetometer will create disturbances in the earth’s magnetic field that will distort the X, Y, and Z field measurements.∙Perming effects on the HMR3000 circuit board need to be taken into account. If the HMR3000 is exposed to fields greater than 10 gauss, then it is recommended that the enclosure/circuit boards be degaussed for highestsensitivity and resolution. A possible result of perming is a high zero-field output indication that exceedsspecification limits. Degaussing wands are readily available from local electronics tool suppliers and areinexpensive. Severe field offset values could result if not degaussed.NON-FERROUS MATERIALSMaterials that do not affect surrounding magnetic fields are: copper, brass, gold, aluminum, some stainless steels, silver,tin, silicon, and most non-metals.HANDLING PRECAUTIONSThe HMR3000 Digital Compass Module measures fields within 1 gauss in magnitude. Computer floppy disks (diskettes)store data with field strengths of approximately 10 gauss. This means that the HMR3000 is many times more sensitive than common floppy disks. Please treat the compass with at least the same caution as your diskettes by avoiding motors, CRTvideo monitors, and magnets. Even though the loss of performance is recoverable, these magnetic sources will interferewith measurements.The fluidic tilt sensor works best when kept near level, and in calm to moderate vibration conditions. If turned upside downor violently jarred, not all the fluid will immediately return to the bottom of the tilt sensor’s glass ampoule. Accurate til t andtilt compensated headings may be unavailable for a minute or two to allow for the fluid to transit to the bottom of the ampoule.PCB DIMENSIONS AND PINOUT 5HMR30006 CASE DIMENSIONSDEMONSTRATION PCB MODULE KITThe HMR3000 Demonstration Kit includes additional hardware and Windows software to form a development kit for the digital compass module. This kit includes the HMR3000 PCB and enclosure, serial port cable with attached AC adapter power supply, and demo software plus documentation on a compact disk (CD). The figure below shows the schematic of the serial port cable with integral AC adapter. There will be three rotary switches on the AC adapter. These should be pointed towards the positive (+) polarity, +9 volts, and 120 or 240 VAC; depending your domestic supply of power.22D9-FD9-F359359HMR3000 7ORDERING INFORMATIONFIND OUT MOREFor more information on Honeywell’s Magnetic Sensors visit us online at .The application circuits herein constitute typical usage and interface of Honeywell product. Honeywell does not warranty or assume liability of customer-designed circuits derived from this description or depiction.Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.U.S. Patents 4,441,072, 4,533,872, 4,569,742, 4,681,812, 4,847,584 and 6,529,114 apply to the technology describedPDS-42005September 2015©2015 Honeywell International Inc.Honeywell12001 Highway 55 Plymouth, MN 55441。
Honeywell 固态压力传感器 说明书
Honeywell 固态压力传感器20PC 系列 20PC Flow Through 系列无放大压力传感器 22PC 系列 24PC 系列 26PC 系列 24PC 26PC压力量程（psi ） 1,15,100 0-0.5,0-1,0-5,0-150-30,0-100,0-2501,0-5,0-15,0-30 0-100 0.5,1,5,15,30,100,250 压力测量方式 表压 表压、差压、绝压表压和差压 表压 结构 热塑 热塑热塑 热塑 端子 PCB PCBPCB PCB ，引线 输出 mV mVmV mV MV 零点、满量程校正 无 无有 无 有 温度补偿 无 无 有 无 有信号处理放大压力 140PC 系列 160PC 系列 189PC 系列传感器压力量程（psi ） 0-1,0-2,0-5,0-5.80-10,0-30(141/142PC)±1,±2.5,±5,±15(143PC)0-27.68″H 2O(161/162PC) ±2.5,5″H 2O(163PC) 0-5,0-10″H 2O(164PC) 0-15 0-100 0-150 压力测量方式 绝压、差压、表压和负压差压、表压和负压 表压 结构 热塑热塑 热塑 端子 0.010″×0.020″PCB同左 0.025″×0.025″PCB 输出 VV V 零点、满量程校正 有有 有 温度补偿 有 有 有气体质量流量传感器低流量AWM1000系列 AWM2000系列 AWM3000系列 AWM40000系列流量范围 ±200,-600 to 1000sccm ±30, ±200, ±1000sccm 0-30,0-200,0-1000sccm ±25,±1000sccm,+6SLPM压力范围 ±4″H 2O ±4″H 2O +2″H2)供电电压 10V 10V 10V 10V输出 MV MV V&mA MV&V温度范围 -25~+85℃ -25~+85℃ -25~+85℃ -25~+85℃端子 0.025″PCB 0.025″PCB 0.025″PCB 0.025″PCB反应时间 3ms max 3ms max 3ms max 3ms max最大共模压力 25psi 25psi 25psi 150psi71170PC 系列 230P 系列 FS 系列触力传感器40PC/4000PC/5000PC 系列 ST/ML 系列 SSP 系列±1,0-15,0-100,0-150,0-250psi(40PC) 0-1,5,10,25,50,100,150,200,250, 0-15,0-100,0-250psi(SSPB,SSPC,SSPE)±1,0-15,0-100,0-150psi,0-250(4000PC) 0-300,500,1K,2K,3K,5Kpsi 1.5-15,100,250psi(SSPD)表压 表压，密封表压 表压热塑（40PC ），黄铜（4000PC ） 不锈钢，黄铜 压铸锌PCB 引脚（40PC ），引线（4000PC ） PACKARD 300mm 长，#18线规引线V 0．5-4．5V 或4-20mA MA 模拟输出或可调触发开关输出有 有 有有 有 有高流量AWM5000系列0-7” H 2O 0-14” H 2O ，0-28”H 2O 0-15，0-30，0-60，0-100，0-150psi 1500g,500g,*过压5500g差压和表压表压 触力 热塑 不锈钢 外壳热塑，不锈钢插杆0．020×0.014”PCB 18”长，22号线规，4芯电缆 PCBmV mV mV 有有 有 有 有 有0-5，0-10，0-15，0-20SLPM---10VV-25-+70℃AMP 4针连接器60ms max50psiHoneywell Datamate 型压力传感器主要应用・液位测量・天然气管线・流量检测・厂用水气油等公用系统・地球物理探测・润滑系统・泄漏探测 特性 好处・低成本 ・可用于各种工业场合・螺纹连接导线管 ・可用于过程控制・防水外壳 ・可直接安装・工厂标定 ・易包装・结构紧凑主要技术参数 尺寸图XX,XX=inches, (XX,XX)=mm DIMENSIONS XX,XX=inches (XX,X)=mm量程范围0-5，15，25，50 PSIG0-100，200 PSIS0-500，1K ，3K ，5K ，PSIS物理参数保证压力： 2倍或1.5倍额定电压冲击压力： 10倍或5倍额定电压材料： 300系列不锈钢冲击： 50g(5ms)振动： Meets MIL-STD-810-C,Figue 514,2-5, Curve AK,20.7g rms minimum重量： 小于155克电气参数满量程输出： 16±0.32mA进入1400Ω回路电阻@25度零输出： 4±0.04 mA@25度电源： 12 to 40Vdc反极性保护： 有绝缘电阻： 1000M Ω,250 Vdc电气连接： 包括机壳接地3线,24AWG,XML 绝缘,43cm 长。
AWM 2000 系列微桥质量气流传感器说明书
681-800-537-6945 USA 1-815-235-6847 International1-800-737-3360 CanadaFEATURESɀBidirectional sensing capability ɀActual mass air flow sensingɀLow differential pressure sensing The AWM2000 Series microbridge mass airflow sensor is a passive device com-prised of two Wheatstone bridges. The heater control circuit in Figure 1is re-quired for operation per specifications.The sensing bridge supply circuit in Fig-ure 2 is also required for operation per specifications. These two circuits are not on board the package and must be sup-plied in the application. The differential amplifier in Figure 3 is a useful interface for the sensing bridge. It can be used to introduce the gain and to introduce volt-age offsets to the sensor output as refer-enced in Equation 1.Note: For applications sensing hydrogen or helium, see Application Note 3, page 131.Figure 1Heater Control CircuitFigure 2Sensing Bridge Supply CircuitFigure 3Differential Instrumentation Amplifier CircuitEquation 1:V o ⍧2R 2+R 1R 4V 2-V 1+V offset()()()R 1R 3where V offset ⍧V S()R 6R 6+R 51-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada 691. Output Voltage is ratiometric to supply voltage.2. Temperature shifts when sensing differential pressure correlates to the density change of the gas over temperature.See Application Note 1.3. Maximum allowable rate of flow change to prevent damage: 5.0 SLPM/1.0 sec.MOUNTING DIMENSIONS (for reference only)Airflow701-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 CanadaOUTPUT FLOW VS INTERCHANGEABILITY (Note 1)Performance Characteristics @10.0 ±0.01VDC, 25°C AWM2100V AWM2150VAWM2200V(Note 2)AWM2300V Press.Flow Nom.Tol.Press.Flow Nom.Tol.Flow Press.Nom.Tol.Press.Flow Nom.Tol.mBar sccm mV±mVȖBar sccm mV±mVsccm ⍯H 2O mV±mVmBar sccm mV±mV0.4920044.50 4.25533014.0 2.5120 4.0031.75 3.50 3.4100055.50 3.700.3515038.75 3.0036209.5 1.590 3.0026.75 2.50 2.480052.90 3.500.2110030.00 1.501710 5.0 1.560 2.0020.00 1.20 1.865050.00 2.500.095016.50 2.509.85 2.5 1.030 1.0011.20 1.800.8340042.50 3.000.000.00 1.007.44 2.0 1.000.000.001.000.3120029.20 3.20−0.09−50−16.50 4.50 6.23 1.5 1.0−30−1.00−11.20 3.0000.00 1.00−0.21−100−30.00 5.0052 1.0 1.0−60−2.00−20.00 3.30−0.31−200−28.9015.00−0.35−150−38.807.65 2.510.50.8−90−3.00−26.75 5.30−0.83−400−41.2026.00−0.49−200−44.509.75000.00.6−120−4.00−31.757.00−1.6−600−48.2029.50−9.8−5−2.5 2.0−2.4−800−52.2032.50−53−30−14.05.0−3.4−1000−55.0036.00Notes:1.Numbers in BOLD type indicate calibration type, mass flow or differential pressure.Tolerance values apply to calibration type only.2.Differential pressure calibrated devices are not recommended for flow e flow calibrated devices for flow measurement.OUTPUT CURVES。
Honeywell HMR3000三轴数字罗盘 磁阻传感器 说明书
电子罗盘模块按照NMEA格式，通过RS232/485串口提供航向输出（横滚、俯仰、偏航）采用Honeywell公司的固态磁阻传感器，具有快速的响应时间至20Hz，航向精度为0.5˚ ,分辨率为0.1˚。
快速响应时间小体积低功耗高精度宽的倾斜角度对铁磁物性金属进行补偿使用固态磁传感器提高了响应速度，和万向架固定式的磁通门传感器相比提高了数据更新速度。
仅为一块线路板，重量小于57克，体积为83x25x22mm，铝外壳封装。
功耗小于25mA，可长时间电池供电0.5˚ 航向精度，分辨率0.1˚ ,可适用于严格定向的应用场合。
倾斜角度为±40˚ ，适合于广泛的要求精确的应用通过对因环境中存在铁磁性金属而对地磁场造成的扭曲的补偿，提高精度。
下表显示，9针插头引脚排列，电源可以为调制的5V ，或不调制6—15V ，只有#9针或#8针中的一个，可由给定连接方法连接。
见以下：接口信号描述通信HMR3000 用简单的ASCII 字符与外部主控制器，通过 RS-232 或 RS-485 通讯。
ASCll 码的发送和接收，使用1个起始位，8个数据位（先是LSB,MSB 总为０） ,无奇偶位，和一个停止位，波特率可设置为1200，2400，4800，9600，19200或38400，HMR3000 对所有收到的带校验码的有效输入作反应。
罗盘输出HMR3000输出三种NMEA 标准格式(HDG,HDT 和XDR),三种专用格式(HPR,RCD 和CCD)，及一个 ASCll 码航向输出，用于数据显示。
HDG,HDT 和HPR 是最通用格式。
$HCHDG 航向、偏差角、磁偏角$HCHDG, 85.5, 0.0, E, 0.0, E*77$HCHDT,航向、对（True)$HCHDT,271.1,T*2C$PTNTHPR,航向、俯仰和横滚$PTNTHPR,Heading,Heading Status,Pitch,Pitch Status,Roll,Roll Status*hh<cr><lf>$PTNTHPR,85.9,N,-0.9,N,0.8,N*2C名称TxD/B RxD/A GND 6-15V 5VOper/Calib(2)Run/Stop(2)Ready/Sleep(2)Cont/Reset(2)入/出Out In In In In In In In In引脚235981647描述RS-232 发送/ RS-485RS-232 接收 / RS-485电源/信号地未调理的电源电压输入调理的电源电压输入Operate/Calibrate (3) input (open=Operate)Run/Stop (3) input (open=Run)Ready/Sleep (3) input(open=Ready)Continue/Reset (3) input (open=Continue)（典型值）－－－6－155 ± 5%0－50－50－50－5（最小值）(1)-18-1800-20-20-20-20单位Vdc VdcVdc Vdc Vdc Vdc Vdc Vdc（最大值）(1)1818307.520202014(1) 绝对最大值(2) 沉电流：200µA (典型值)， 400mA(最大值)(3) 开路输入 =高电平HMR3000 连线图——计算机RS232 到 HMR3000订货指南HMR3000-Demo-232*.....RS232HMR3000-D00-232..........RS232.........NoneHMR3000-D21-232..........RS232.........Extended BaseHMR3000-D00-485..........RS485.........NoneHMR3000-D21-485..........RS485.........Extended Base*Development Kit includes one module in alu minum enclosure, cablingwith power supply, demonstration software for PC running Windows™and User’s Manual.数值<0.5˚<1.5˚± 0.3˚0.1˚degrees/mils ±40˚±0.4˚±0.6˚±0.2˚0.1˚degree/mils ±1.0 Gauss （最大值）1 mGauss 5.0 Vdc 调理电压6~15Vdc 未调理电压35 mA@6 Vdc13 mA 2.0 mA RS-232RS-4851200 to 38400 bps NMEA 0183连续滤波0.75 oz (22g)3.25 oz (92g)1.2 x 2.95 x 0.7601.5 x 4.2 x 0.88-20 to 70˚C -35 to 100˚C 30 英寸高落下20~2000Hz Random 2 hrs/axisIPC6012IPC610航向角俯仰和横滚磁场电气接口物理环境制造指标1. 航向精度是假设地球磁体只有硬铁干扰，已通过标定进行补偿2. 标定值3. 由设计参数保证4. 典型5. 迟到或超过＊器件方向角不超过75˚在工作或贮存时——可引起短暂的精度损失。
Honeywell_传感器_技术参数 2
目录：水系统传感器 (2)水流开关WFS-1001-H (2)液位开关MAC-3-5M (2)水管式压差传感器P7620C (3)水管式压力传感器P7620A (4)流量变送器8550+2517 (5)VF20T浸入式温度传感器 (5)风系统传感器 (7)DPS系列气流压差开关 (7)DPTM系列压差变送器 (7)风管式温度传感器LF20 (8)风管式温度传感器LF20-C (9)室外温度传感器T7416A1022 (9)室内温度传感器T7412A1000 (9)室内温度传感器CTR21 (10)风管式温湿度传感器H7050B1018 (10)风管式温湿度变送器H7050B1117 (11)室内温湿度变送器H7030A1000 (12)室内温湿度传感变送器H7012B1023 (12)室内温湿度传感器CTR21-H (13)风管式温湿度传感器H7015B1020 (14)室外温湿度传感变送器H7508A1042 (14)CDS2000 系列二氧化碳传感器 (15)C7110C1001(替换已停产的AQS51) 系列二氧化碳传感器 (15)AQS71-KAM(替换已停产的AQS51-KAM) 系列二氧化碳传感器 (16)GD250W3E 系列一氧化碳传感器 (17)C7110A1005系列房间空气质量传感器 (17)L4064K1006B 高温断路开关，手动复位 (18)T6950A1000 低温短路开关，手动复位 (18)数字化挂墙模块T7560 温度传感器 (19)数字化挂墙模块T7460 温度传感器 (19)水系统传感器水流开关 WFS-1001-H应用∙ WFS 水流开关具有SPDT 输出，性能优异，高精度可靠性，可安装在水管和对铜无腐蚀性液体中，当液体流量达到整定速率时，可不到整定点，其一个回路关闭，另一个回路打开，典型应用于连锁作用或断流保护的场所。
∙ WFS 系列开关仅用0℃以上液体介质，它亦可于高盐或氯气的液体，但是非易燃介质。
Honeywell红外传感器常用型号主要包括
Honeywell红外传感器常用型号主要包括:SE2470，SD2440，SE1450，SD1440，SE5470，SD5443，HOA080，SEP-4216，SDP-4206，SEP-4208，SDP-0323，SDP-3208，SEP-0322，SDP-0301，SME-2480，SMD-2441，HOA-0872，HOA-0301，HOA-0306，HOA-1550，HOA-15D11，HOA-15D21，HOA-30DC1，HOA6480Honeywell红外传感器-光电接收三极管SD1440-001，SD1440-002，SD1440-003，SD1440-004，SD1440-001L，SD1440-002L，SD1440-003L，SD1440-004L，SD2440-001，SD2440-002，SD2440-003，SD2440-004，SD3443-001，SD3443-002，SD3443-003，SD5443-001，SD5443-002，SD5443-003，SD5443-004，SD5491-001，SD5491-002，SD5491-003，SD5491-004，SD5491-005，SD5491-006，SDP8405-001，SDP8405-002，SDP8405-003，SDP8405-011，SDP8405-012，SDP8405-013，SDP8405-014，SDP8405-015，SDP8406-001，SDP8406-002，SDP8406-003，SDP8406-004 Honeywell红外传感器-光电接收二极管SD1420-002，SD1420-002L，SD2420-002，SD3421-002，SD5421-002，SDP8276-001Honeywell红外传感器-光电接收达林顿管SD1410-001，SD1410-002，SD1410-003，SD1410-004，SD1410-001L，SD1410-002L，SD1410-003L，SD1410-004L，SD2410-001，SD2410-002，SD2410-003，SD3410-001，SD3410-002，SD3410-003，SD3410-004，SD5410-001，SD5410-002，SD5410-003，SDP8105-001，SDP8106-001Honeywell红外传感器-阻挡弱光的光电三极管SDP8475-201，SDP8476-201适用于要求抵制环境光线的干扰的应用中，以及在对射的应用中，当阻断物为半透明的物体时。
Honeywell霍尔流量传感器
Honeywell霍尔流量传感器广州南创谭工美国Honeywell流量传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。
美国Honeywell流量传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，Honeywell 霍尔流量传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell流量传感器提供最佳的服务与解决方案。
有质量，交货，价值，和Honeywell霍尔流量传感器做的一切技术的不懈重点。
Honeywell霍尔流量传感器图片：Honeywell霍尔流量传感器自动化和控制解决方案美国Honeywell的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。
美国Honeywell的产品和解决方案，使客户能够捕获更多和更好的数据，更快的速度和整个无线景观，提高生产率，安全性和安全性，推动更好的决策，并降低了成本。
Honeywell霍尔流量传感器航天美国Honeywell流量传感器的航空航天产品和服务用于全球几乎所有的商业和商务飞机经营的今天，以及国防和空间应用。
美国Honeywell提供综合航空电子系统，发动机，系统和服务解决方案，认真听取美国Honeywell的客户和重点放在最能满足他们的需求，使飞行更安全，更可靠，更高效，更具成本效益的技术。
Honeywell霍尔流量传感器高性能材料和技术以开发和制造先进的材料和工艺技术，是人每天使用，以减少温室气体排放，阻止子弹，使生产的绿色燃料，增加炼油能力，加速药物发现，和保护药品的全球领先地位。
美国Honeywell的先进材料制造尼龙至计算机芯片医药包装产品，以及工艺技术由霍尼韦尔公司的UOP公司的形式大部分世界炼油厂的基础有效地生产汽油，柴油，喷气燃料，石油化工和生物燃料开发的关键。
美国Honeywell霍尔传感器
美国Honeywell霍尔传感器广州南创谭工美国Honeywell流量传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。
美国Honeywell流量传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，美国Honeywell霍尔传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell流量传感器提供最佳的服务与解决方案。
有质量，交货，价值，和美国Honeywell流量传感器做的一切技术的不懈重点。
美国Honeywell霍尔传感器图片：产品名称：美国Honeywell霍尔传感器产品型号：AWM3000系列产品品牌：美国Honeywell流量传感器所属分类：气体质量流量传感器美国Honeywell霍尔传感器以N2、CO2、Ar进行的激光校准接口：传感器有各种流量接口可选安装：美国Honeywell霍尔传感器采用远程安装产品特性描述：美国Honeywell霍尔传感器能承受50psi的共模压力，包含放大、线性修正、温度补偿和气体标定，Honeywell AWM5000流量传感器系列为文丘里流量管型外壳，可以测量最高至20升/分的流量，传感器最大压降2.25″水柱的气流，微桥芯片直接与气流接触，大大减少了由于通气孔或旁路堵塞引起的误差。
美国Honeywell霍尔传感器小流量传感器为输出1-5V气体质量流量传感器，传感器内部集成发热器控制电路、双传感电路、差分放大电路，量程30sccm、200sccm、1000sccm。
美国Honeywell霍尔传感器微差压双向流量系列传感器以极小流量检测为主，输出4～20mA，量程0～0.5″水柱、0～2″水柱、±1000sccm。
美国Honeywell霍尔传感器自动化和控制解决方案美国Honeywell的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。
HONEYWELL流量传感器AWM系列-文档
HONEYWELL流量传感器AWM系列-文档本公司业代理美国honeywell霍尼韦尔空气质量流量传感器空气质量流量传感器有一个由加热器与温度敏感元件组成的薄膜，隔热的电桥式结构。
该电桥式结构对流过芯片的空气或其他气体流量有灵敏和快速的反应。
电源电压：8Vdc至15Vdc工作温度：-25摄氏度至85摄氏度(-13F-185F)介质相容性：仅限于干燥气体AWM2000系列微桥型空气质量流量传感器是一个无源器件，由2个惠斯通电桥组成，并具有双向传感的能力，按照技术要求，工作时需要一个加热器控制电路，和一个传感电桥馈电电路。
传感器中没有这两个电路，需用户自己设计。
差动放大器是传感电桥一个有用的接口。
它可用来对传感器输出引入增益和电压补偿。
信号调节：非放大型（输出-44,5mVdc至44,5mVdc)压力孔型式：直通型传感器电阻：5K欧流量/压力范围参考型号+_200 sccm AWM2100V+-4.0英寸水柱(10 mBar) AWM2200V+-1000 sccm(1 SLPM)(每分钟1标准升) AWM2300VAWM3000系列如同2000系列，是由双惠斯顿电桥控制空气流量的测量，该AWM3000系列为放大型，所以，它可用来对传感器输出提高增益和引入电压补偿。
加热器控制电路和传感电桥馈电电路都集成在传感器中。
信号调节：放大型（输出1 Vdc至5 Vdc）压力孔型式：直通型流量/压力范围参考型号+_200 sccm AWM3100V+_2.0英寸水柱(5 mBar) AWM3200V+_0.5英寸水柱AWM3201CR+_1000 sccm(1 SLPM) AWM3300V+_1000 sccm(1 SLPM)双向AWM3303VAWM40000系列微桥型空气质量流量传感器根据传热原理工作。
空气质量流量横穿过传感器元件的表面。
输出电压根据通过传感器进出口的空气质量流量或其他气体质量流量成比例地变化。
变压器油中微量水分检测装置的设计
变压器油中微量水分检测装置的设计作者：王凯周正来源：《现代电子技术》2013年第17期摘要：分析目前常用的变压器油中微量水分检测方法的优缺点，在此基础上设计一种变压器油中微量水分的检测装置。
该检测过程采用物理检测方法，能实现自动定量取样、油水分离、水分汽化、水分检测、微水含量计算。
提出对变压器油中微量水分的总体检测方案，分析检测原理，设计硬件实现电路。
样机测试结果证明该检测装置的有效性。
关键词：变压器油；水分检测；传感器；物理检测中图分类号： TN911.7⁃34； TM406 文献标识码： A 文章编号： 1004⁃373X（2013）17⁃0098⁃030 引言变压器油中的气体杂质和微量水分会降低变压器油的绝缘性能，加速绝缘系统老化，还可导致变压器局部放电击穿及产生气泡，这不仅仅缩短变压器的正常使用寿命，严重时会导致安全事故发生，造成巨大的损失和危害，因此变压器在投入运行以前都需要进行微水检测。
变压器油中微水检测是近些年国内外研究的热点，目前研究的检测方法主要有蒸馏法，卡尔费休法，重量法，介电常数法，各种方法各有优缺点。
蒸馏法原理简单，但检测时间长，受环境影响大，分析效率及准确度低，检测误差大。
卡尔费休法分析速度快，灵敏度高，准确度高，但检测时滴定池的清洁度、滴定参数以及滴定中偶尔出现的假滴定终点现象以及空气的相对湿度都会影响检测结果，而且检测中使用的化学试剂含有一定毒性，操作不当会影响实验人员的健康，废弃的试剂还会对环境造成一定污染。
重量法原理较简单，但油中常混有杂质气体，导致精度不高。
介电常数法可应用于油中微水的在线检测，准确度较高，可以直接获得水分含量，但是检测结果易受电容敏感性和环境温度影响。
为克服以上方法的缺点，本文采用物理方法对变压器油中微量水分进行检测。
该检测方法不需要化学试剂，无任何化学反应，对操作人员无毒害，对环境无污染，运行成本低，整个检测过程绿色环保。
检测过程操作简单，检测速度快，不需要配制和保存化学试剂，能自动实现定量取样、油水分离、水分汽化、水分检测、微水含量计算。
Honeywell AWM40000系列 放大和不放大 气流质量传感器 说明书
AWM40000系列包括不带放大和放大/信号处理的信号。
AWM42150V 和AWM42300，使用和AWM2000相同的电路。
AWM43300V 和AWM43600V 使用和AWM3000相同的电路。
AWM43600V 为6SLPM 器件。
图1 发热控制电路图2 传感桥路供电电路安装尺寸（仅供参考）特点：●多个集中安装/O 形密封圈● 陶瓷流量管（无引气管），0-1000sccm ● 塑料流量管（无引气管），0-6SLPM ● 高共模压力（150psi ）● 工作温度可至125˚C ● 零点和满量程高稳定性AWM40000系列选型指南流量范围（满量程）输出电压@标定点零点电压零点漂移+25~-25˚C +25~85˚C 输出电压漂移+25~-25˚C +25~+85˚C 重复性&迟滞压降@满量程（in H 2O ）电源（VDC ）功耗（mW ）反应时间（ms ）共模压力（psi ）输出负载标定气体比率变化量工作温度储存温度（˚C ）冲击AWM42150VH±25sccm8.5±1.5mV @25sccm 0.0±1.0 mV DC ±0.20mV DC+2.5%读数(典型值)-2.5%读数(典型值)±0.35%读数－－－Min 8.0---------NPN(电流沉):10mA 氮气±0.3%读数-25~85C -40~90C100g 峰值(5drops,6axis)AWM42300V ±1000sccm54.7±3.7mVDC @1000sccm 0.0±1.0 mV DC ±0.20mV DC±2.5%读数(最大值)+6%读数(最大值)±1.00%读数1.50(典型值)Typ.10±0.01501.0---PNP （电流源）：20mA （AWM42150VH 为氢气）AWM43300V +1000sccm5±0.15VDC @1000sccm 1.00±0.05VDC ±0.025VDC-5%读数(最大值)+6%读数(最大值)±0.5%读数1.02(典型值)Max.15 (2)603.0 (1)150AWM43600V +6LPM5±0.15VDC @6LPM 1.00±0.05VDC ±0.025VDC-5%读数(最大值)+6%读数(最大值)±1.00%读数8.00(典型值)注：1、从10%~90%反应时间一般1毫秒2、输出电压随电源电压而比率变化3、重复性和迟滞反应了测量设备的内在精度4、最大的防止损坏的流量变化量：5LPM/1.0sec输出气流VS 器件互换性（初步数据，根据有限的试验数据）Flow Sccm 2520151050NOM mVDC 8.506.805.203.501.700.00TOL ±mVDC 1.51.51.01.01.01.0AWM43300VFlow Sccm 10009008007006005004003002001000NOM VDC 5.004.974.894.784.634.434.153.763.232.491.00TOL ±VDC 0.150.160.170.180.190.200.210.190.170.140.05AWM43600V Flow Sccm 6543210NOM VDC 5.004.854.604.203.652.751.00TOL ±VDC 0.150.200.250.250.210.170.10AWM42300VFlow Sccm 10008006004002000-200-400-600-800-1000NOM mVDC 54.752.450.041.930.30.00-30.3-41.9-50.0-52.4-52.7TOL ±mVDC 2.02.22.53.03.01.04.05.06.06.06.0输出曲线AWM42150VH推荐型号AWM43600V量程6LPM。
计量器具目录2
980323
22
精密压力校验仪DPI
98-F122
980324
23
英国德鲁克有限公司(Druck)
工业过程校验仪UNOMAT系列
(MCX,TRX,MVX,VAX,UPS)
98-F123
980324
24
英国德鲁克有限公司(Druck)
压力变送器
(PTX,PDCR,PMP,STX,LPX/LPM,RPT)
3
美国霍尼韦尔公司(Honeywell Inc)
气体流量传感器AWM型(AWM3000系列)
气体流量传感器AWM型(AWM4000系列
气体流量传感器AWM型(AWM5000系列)
98-F103-2
98-F103-3
98-F103-4
980116
4
美国沃特斯公司(WATERS CORPORATION USA)
PG8001-S,PG12001-S,PG12001-S DR,
PG1200-S,PG203-S,PG503-S,PG503-S DR,
PG802-S,PG2002-S,PG3001-S,PG5002-S,
PG5002-S DR,PG5001-S,PG8000-S,PG8001-S,
PG12001-S,PG12001-S DR,PG12000-S,
序号
制造单位
计量器具名称及型号规格
证书编号
批准
日期
1
瑞士Mettle梅特勒仪器公司
电子精密天平PM系列PM100 PM200 PM300 PM400PM16 PM460 PM600 PM2000 PM3000 PM6000 PM4000 PM4600 PM6 PM11 PM34 PM30 CM200 PJ300 PJ400 PJ600 PJ3000 PJ4000 PJ6000 PJ360 PJ3600 PJ6 PJ12 PJ1220 PJ15 PJ30
Honeywell ST 3000 Smart Transmitter 型号 STG14T 产品说明
ST 3000 Smart TransmitterSeries 100 High Temperature GP ModelsSTG14T, STF14T 0-500 psig / 0-35 barg34-ST-03-707/04Specification and Model SelectionGuideIn 1983, Honeywell introduced the first Smart Pressure Transmitter ― the ST 3000®. In 1989, Honeywell launched for smart field devices. Today, Honey-well transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applica-tions. For applications requiring direct connection to processes requiring small flange, small sanitary connec-tions or 1/2” NPT, Honeywell offers the STG14T transmitter. Applications in-clude gauge pressure for reaction ves-sels in the chemical industry as well as level applications in both the chemical and hydrocarbon processing industries with a relatively high process tempera-ture of 302F (150C). Applications for the food and pharmaceutical industries typically use sanitary connections and M-20 fill fluid.All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART * output, or F OUNDATION ™ Fieldbus output. When digitally integrated with Honey-well’s Process Knowledge System™, EXPERION PKS™, ST 3000 instru-ments provide a more accurate proc-ess variable as well as advanced diag-nostics.S100 transmitters lead the industry in: • Accuracy • Stability • Reliability • Rangeability • WarrantyIncludes Lifetime Tranmsitters: • Accuracy = +/-0.0375%• Stability = +/-0.01% per year • Reliability = 470 years MTBF • Rangeability = 400 to 1• Lifetime Warranty = 15 yearsFigure 1—Series 100 High Temperature GP Transmitters feature proven pie-zoresistive sensor technology.The devices provide comprehensive self-diagnostics to help users maintain high uptime, meet regulatory requirements, and attain high quality standards. S100 transmitters are ideal for critical applications, such as custody transfer of natural gas and energy and material bal-ances, where accuracy and stability are of the utmost importance."Our commitment to Honeywell field instruments is based on seam-less integration with our Honeywell system and the enhanced fault detection that the Honeywell DE protocol offers. Honeywell instru-ments also offer us a better way of ensuring database integrity over simple analog instruments. In addition, Honeywell's high-quality sup-port has enabled us to better implement solutions to some of ourmore difficult problems. We have used Honeywell differential pressure smart transmitters for the past eight years. Based on their accuracy and low failure rates, we are now targeting critical flow applications that require the robustness that these transmitters bring.” DCS Systems EngineerInternational Integrated Oil CompanyIntroduction34-ST-03-70 Page 2Description FeaturesThe ST 3000 transmitter can replace any 4 to 20 mA output transmitter in use today and operates over a standard two-wire system.The measuring means is a piezoresistive sensor, which actually contains three sensors in one. It contains a differential pressure sensor, a temperature sensor, and a static pressure sensor.Microprocessor-based electronics provide higher span-turndown ratio, improved temperature and pressure compensation, and improved accu-racy.The transmitter’s meter body and electronics housing resist shock, vibra-tion, corrosion, and moisture. The electronics housing contains a com-partment for the single-board electronics, which is isolated from an inte-gral junction box. The single-board electronics is replaceable and inter-changeable with any other ST 3000 Series 100 or Series 900 model transmitter.Like other Honeywell transmitters, the ST 3000 features two-way com-munication between the operator and the transmitter through our Smart Field Configurator (SFC). You can connect the SFC anywhere that you can access the transmitter signal lines.The SCT 3000 Smartline® Configuration Toolkit provides an easy way to configure instruments using a personal computer. The toolkit enables configuration of devices before shipping or installation. The SCT 3000 can operate in the offline mode to configure an unlimited number of de-vices. The database can then be loaded downline during commissioning. • Choice of linear or square root output conformity is asimple configuration selec-tion.• Direct digital integration with Experion PKS and other con-trol systems provides localmeasurement accuracy to thesystem level without addingtypical A/D and D/A converterinaccuracies.• Unique piezoresistive sensor automatically compensatesinput for temperature andstatic pressure.Added “smart”features include configuringlower and upper range val-ues, simulating accurate ana-log output, and selecting pre-programmed engineeringunits for display.• Smart transmitter capabilities with local or remote interfac-ing means significant man-power efficiency improve-ments in commissioning,start-up, and ongoing mainte-nance functions.34-ST-03-70 Page 334-ST-03-70 Page 4Specifications34-ST-03-70Page 5Ambient Temperature De-ratingSilicone Fill Fluid Neobee Fill FluidProcess temperatures above 125 °C (257 °F) require de-rating the ambient limit as follows:Process temperatures above 85 °C (185 °F) require de-rating the ambient limit as follows:Process Temperature Ambient TemperatureLimit Process Temperature Ambient TemperatureLimit150 °C (302 °F) 140 °C (284 °F) 125 °C (257 °F)50 °C (122 °F)60 °C (140 °F)85 °C (185 °F)110 °C (230 °F)100 °C (212 °F)85 °C (185 °F)50 °C (122 °F)60 °C (140 °F)75 °C (167 °F)Performance Under Rated Conditions* -* Performance specifications are based on reference conditions of 25°C (77°F), 10 to 55% RH, and 316L SS diaphragm. ** Transmitter URL limit or maximum process connection rating, whichever is lower.34-ST-03-70Page 6Performance Under Rated Conditions – General for all ModelsParameter Description Output (two-wire) Analog 4 to 20 mA or digital communications DE mode. Options available forF OUNDATION Fieldbus and HART protocol.Supply Voltage Effect ±0.005% span per volt.Damping Time Constant Adjustable from 0 to 32 seconds digital damping.EMC Classification Group 1, Class A, ISM Equipment (EN 55011, emissions), Industrial Equipment (EN50082-2, immunity)CE Conformity (Europe) 89/336/EEC, Electromagnetic Compatibility (EMC) Directive.Lightning Protection Option (Code “LP”) Leakage Current: ***********************,93°CImpulse Rating: 10/20 µ sec. 5,000 Amps (50 strikes) 10,000 Amps (20 strikes) (rise/decay) 10/1000 µ sec. 250 Amps (1000 strikes) 500 Amps (400 strikes)Physical and Approval BodiesParameter Description Process Interface See Model Selection Guide for Material Options for desired process connection.Diaphragm Materials (wetted) 316L Stainless SteelGasket Ring Materials (wetted) 316L Stainless SteelMounting Flange (non-wetted) 316 Stainless Steel.Fill Fluid Silicone (DC 200) or Neobee (M20)Electronic Housing Epoxy-Polyester hybrid paint. Low copper-aluminum alloy. Meets NEMA type 4X(watertight) and designed to meet NEMA 7 (explosion proof).Process Connections Process Head: 1/2-inch NPT.Sanitary: 2” Sanitary Tri-Clamp.Flange: 1/2”, 1”, 1 1/2” and 2” 150# or 300# ANSI flange.Wiring Accepts up to 16 AWG (1.5 mm diameter).Mounting 1/2-inch NPT, sanitary seal, or flange mount connection.Dimensions See Figures 4 to 6Net Weight 7 pounds (3.2 Kg) to 15 pounds (7 Kg)Approval Bodies- Hazardous Areas- Canadian RegistrationNumber (CRN) Approved as explosion proof and intrinsically safe for use in Class I, Division 1, Groups A, B, C, D locations, and nonincendive for Class I, Division 2, Groups A, B, C, D locations. Approved EEx ia IIC T4, T5, T6 and EEx d IIC T5, T6 per ATEX standards. See attached Model Selection Guide for options.- All ST 3000 model designs, except STG19L, STG99L, STG170, STG180, have been registered in all provinces and territories in Canada and are marked CRN: 0F8914.5C.Table continued on next page ⇒34-ST-03-70Page 7Physical and Approval Bodies, continuedParameter DescriptionPressure Equipment Directive (97/23/EC) The ST 3000 pressure transmitters listed in this Specification have no pressurized internal volume or have a pressurized internal volume rated less than 1,000 bar (14,500 psig) and/or have a maximum volume of less than 0.1 liter. Therefore, these transmitters are either; not subject to the essential requirements of the directive97/23/EC (PED, Annex 1) and shall not have the CE mark, or the manufacturer has the free choice of a module when the CE mark is required for pressures > 200 bar (2,900 psig).NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowable pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination.Figure 4 Typical mounting dimensions for 1/2-inch NPT connection models for reference.34-ST-03-70 Page 8Figure 5 Typical mounting dimensions for flush sanitary seal connection models for reference.34-ST-03-70Page 9Figure 6 Typical mounting dimensions for small flange connection models for reference.34-ST-03-70 Page 10Options Ordering Information Indicating Meter(ME and SM Options)Two integral meter options are available. An analog meter (option ME) is available with a 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display for both analog and digital output and can be configured to display pressure in pre-selected engineering units.Lightning Protection (Option LP)A terminal block is available with circuitry that protects the transmitter from transient surges induced by nearby lightning strikes.HART Protocol Compatibility (Option HC)An optional electronics module is available for the ST 3000 that provides HART Protocol compatibility. Transmitters with the HART Option are compatible with the AMS System. (Contact your AMS Supplier if an upgrade is required.)Transmitter Configuration (Option TC)The factory can configure the transmitter linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad information as specified. Lifetime Warranty(Option WL)Extends limited 1-year warranty policy to 15 years for ST 3000S100 pressure transmitters. See Honeywell Terms and Conditions.Indicator Configuration(Option CI)Provides custom configuration ofSmart MetersTagging (Option TG)Up to 30 characters can be addedon the stainless steel nameplatemounted on the transmitter’selectronics housing at no extra cost.Note that a separate nameplate onthe meter body contains the serialnumber and body-related data. Astainless steel wired on tag withadditional data of up to 4 lines of 28characters is also available. Thenumber of characters for taggingincludes spaces.Custom Calibration and ID inMemory (Option CC)The factory can calibrate any rangewithin the scope of the transmitter’srange and enter an ID tag of up toeight characters in the transmitter’smemory.F OUNDATION Fieldbus(Option FF)Equips transmitter with FF protocolfor use in 31.25 kbit/s FF networks.See document 34-ST-03-72 foradditional information on ST 3000Fieldbus transmitters.Contact your nearest Honeywell sales office,orIn the U.S.:HoneywellIndustrial Automation & Control16404 North Black Canyon Hwy.Phoenix, AZ 850531-800-288-7491In Canada:The Honeywell Centre155 Gordon Baker Rd.North York, Ontario M2H 3N71-800-461-0013In Latin America:Honeywell Inc.480 Sawgrass Corporate Parkway,Suite 200Sunrise, FL 33325(954) 845-2600In Europe and Africa:Honeywell S. A.Avenue du Bourget 11140 Brussels, BelgiumIn Eastern Europe:Honeywell Praha,s.r.o. Budejovicka 1140 21 Prague 4,Czech RepublicIn the Middle East:Honeywell Middle East Ltd.Khalifa Street,Sheikh Faisal BuildingAbu Dhabi, U. A. E.In Asia:Honeywell Asia Pacific Inc.Honeywell Building,17 Changi Business Park Central 1Singapore 486073Republic of SingaporeIn the Pacific:Honeywell Pty Ltd.5 Thomas Holt DriveNorth Ryde NSW Australia 2113(61 2) 9353 7000In Japan:Honeywell K.K.14-6 Shibaura 1-chromeMinato-ku, Tokyo, Japan 105-0023Specifications are subject to change without notice Or, visit Honeywell on the World WideWeb at: 34-ST-16-47 Issue 14**The user must determine the type of protection required for installation of the equipment. The user shall then check the box [D] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has been checked on the nameplate, the equipment shall not then be reinstalled using any of the other certification types.This Page Intentionally BlankST 3000 is a registered trademark of Honeywell International Inc.HART* is a trademark of the Hart Communication Foundation.FOUNDATION™ is a trademark of the Fieldbus Foundation.Industrial Measurement and ControlHoneywell International Inc.2500 W. Union Hill Drive,Phoenix, Arizona 85027 Honeywell International Inc.。
Honeywell HMR3200 3300 说明书
北京：Tel:010-84583280
15 8
HZ
接头 物理量 尺寸 重量
电路板 HMR3200 HMR3300 环境（储存温度为－５５至１２５℃） HMR3200 温度 HMR3300 引脚结构 引脚号码 1 2 3 4 5 6 7 8
25.4*36.8*1.1 7.25 7.5 -40 -20 引脚名称 SCK RX/SDI TX/SDO CS CAL +5VDC GND UV --+85 +70
概述：
霍尼韦尔的HMR3200/HMR3300是用于导航和制导系统的电子罗盘 解决方案模块。霍尼韦尔的磁阻传感器被用于 HMR3200/HMR3300 以达到小尺寸， 固态罗盘的可靠性和精度。 非 HMR3200/HMR3300， 常易于集成到使用 ASCII 格式的 UART 或 SPI 接口的系统中。 并采用两轴加速度传感器作为倾角补 HMR3300具有三轴磁场测量， 偿，从而使倾角测量范围达到 ± 60˚ 。 HMR3200 是两轴磁阻模块，在垂直和水平方向的性能被优化。
上海：Tel:021-62370237
霍尼韦尔商业开关与传感器
深圳：Tel:0755-25181226 广州：Tel:020-38791169 e-mail:jian.bo.zhou@ /sensing
北京：Tel:010-84583280
北京：Tel:010-84583280
数字罗盘 HMR3200/HMR3300
HMR3200/HMR3300，模块通过 ASCII 码通讯，波特率为 19200。数据格式为 1 个 start 位, 8 个 data 位, 1 个 stop 位，没有 奇偶性。运行命令举例如下： 方向输出命令 *H<cr><lf>选择方向输出模式 格式：方向、俯仰、侧滚（弧度） 举例：235.6，0，1，-0.3 磁场计输出命令 *M<cr><lf>选择磁场计输出模式 格式：Magx,MagY,Magz 举例：1256，-233，1894 SPI（串行外围接口）接口运行模式 SPI 运行模式如下： SCK 空置低 数据输出紧跟于 SCK 下降沿后 数据采样在 SCK 上升沿前 （MODE CKP=0 CKE=O） SPI 通讯协议 HMR3200/HMR3300 模块控制 SCK 和 SDO 脚，主控制器控制 SDI 和 CS 脚，主控制将此 HMR 模块 CS 脚延迟 20ms 开始 ，主控制器同时会发送一个有效命令字符。HMR 模块将估算从主控制器 SPI 通讯。HMR 模块作为响应会发送 ASCII 的“S” 收到的命令字符；如果命令字符是被认可的并且有效，HMR 模块将传出响应的数据。在发送被请求的数据后，HMR 模块将 结束 SPI 通讯周期。如果命令是不被认可或者无效的，HMR 模块将回应一个 ASCII 的“e” ，然后结束 SPI 通讯周期。 SPI 命令： 方向输出：为响应“H” “h” 或 命令，HMR3200/HMR3300 模块将发送数的整数值。每一字节的 MSB 位都被首先发送。 SCK 是 16mS 高，22mS 低。在连续的字节发送间将有 50mS 的延迟。 PCB 模块演示套件 HMR3200/HMR3300 演示模块包括附件和 WINDOWS 软件，构成一套电子罗盘开发套件。此套件包括相应的 HMR3200/ HMR3300PCB 模块，带 RS-232 接口的母板，附带 AC 插头的串口电缆，接口软件和使用说明文件。 订货： HMR3200 HMR3200-Demo-232 HMR3300 HMR3300-Demo-232
Honeywell 气流质量传感器AWM3000系列 说明书
AWM3000系列是输出为1-5V 的气体质量流量传感器，图1、图2、图3分别为传感器内部的发热器控制电路、双传感电路、差分放大电路图1发热控制电路图2 传感桥供电电路图3 差分放大电路安装尺寸特点：●激光校整保证了一致的互换性● 测量流速可至1.0LPM技术规格：10.0±0.01VDC流量范围（span ）压力范围(psi)(参照附录)输出电压@标定点零点电压零点漂移+25~-25˚C +25~+85˚C 输出电压漂移Max +25~-25˚C +25~+85˚C 重复性&迟滞Max电源（VDC ）功耗（mW ）反应时间（ms ）共模压力(psi)工作温度储存温度（˚C ）冲击(5drops,6axis)AWM3100V+200sccm5VDC@200sccm1.00±0.05VDC ±25mV-4%读数+4%读数±0.5%读数Min8.0----------25~85˚C -40~90˚C100g 峰值(5drops,6axis)AWM3150V +30sccm3.4VDC@25sccm1.00±0.1VDC±100mV±5.0%读数±5.0%读数± 1%读数Typ.10±0.01501.0---AWM3200V±2.0”水柱5VDC@2”水柱1.00±0.08mV±25mV+24.0%读数-24.0%读数±0.5%读数Max.15 (2)603.0 (1)25AWM3300V +1000sccm5VDC 1000sccm 1.00±0.1VDC±25mV-5%读数+5%读数±1%读数注：1、信号处理最初预热所须时间最多1分钟2、输出电压随电源电压而比率变化3、 差压器件的温漂主要是由气体的浓度随温度而变化气流器件的温漂主要是薄膜TCR 的系数的二次根及厚膜电阻的温飘，加上运放的温飘4、为防止损坏，最大允许流量变化值：5.0SLPM/1.0秒注：正向气流方向被定义为从P １孔流向P2孔，并导致正的输出，不要施加超过10磅的力在２个测量空孔的每个方向上。
Honeywell变送器特性ST3000 精华!!
11
ST3000 Sensor Technology 先进的传感器技术
霍尼韦尔公司的技术人员将差压△P，静压P，温度T 三组传感器作到一片硅片上 ，制造成复合扩散硅传感器。
ST3000变送器的复合扩散硅压阻式传感器结构 (剖视图) ：
Diaphragm 离子膜
Silicon Chip 硅片 Pyrex Tube 耐热玻璃管
Interface to other instruments like VITO
and pressure transmitters （提供和其
他仪表的接口）
Planar antennas, where the position of the feeders ensure a superb
control of the radarbeam（平面天线， 发射源的位置排列对雷达波束提供很
– No heater / isolation required（不需要加热和隔离部件） Using field proven planar antennas（使用平面天线） Handles all applications（适用于各种应用场合） Full galvanic isolation on all in- and outputs（完全隔绝雷电）
3
Honeywell, 1st in Measurement & Control
1970 1983 1989 1995 1998
首先引入 4~20 mA 通讯标准。 首先生产世界上第一台智能变送器。 首先提出数字一体化概念。 首先推出多变量变送器。 是FF(现场总线基金会)组织的主要参与者。
全体工作人员都有义务使HONEYWELL成为控制方面的 领导者。 (从 CEO 到每一位销售和服务人员)
气体流量传感器
气体流量传感器广州南创房工美国Honeywell是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。
美国Honeywell全球约132,000名员工，其中包括超过19,000名工程师和科学家，美国Honeywell的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell提供最佳的服务与解决方案。
气体流量传感器AWM2000系列：AWM2000系列为无源器件，包含两个惠斯顿电桥：一个为闭环的发热控制电路，一个为双传感电路。
双向气流传感实际气体质量流量传感流速0~30sccm 到0~1000sccm能承受最大共膜压力25PSI工作温度:-25~+85℃供电电压:10VDC输出电压:最大50mV需另加发热器控制及传感桥路供电电路气体流量传感器AWM3000系列:AWM3000 系列是输出为1-5V 或4~20mA的气体质量流量传感器激光校整保证了一致的互换性测量流速可至1.0LPM能承受最大共膜压力25PSI工作温度:-25~+85℃供电电压:10VDC气体流量传感器AWM40000系列：AWM40000 系列包括不带放大和放大/ 信号处理的信号。
气体流量传感器有一个由加热器与温度敏感元件组成的薄膜隔热的电桥式结构。
该电桥式结构对流过芯片的空气或其他气体流量有灵敏和快速的反应。
AWM43600V 为6SLPM 器件。
它主要的特点是：最新的微加工技术最高检测流量0-6SLP工作温度可至125℃最高可承受150PSI的共膜压力快速响应，低电流损耗。
零点和满量程高稳定性应用场合：电缆充气机，医用呼吸机和肺活量仪，气体检测设备，气体标定气体流量传感器AWM5000 系列：AWM5000 系列为文丘里流量管形外壳，可以测量最高至20 升/分钟，最大压降2.25"水的气流.微桥芯片直接与气流接触，大大减少了由于通气孔或旁路堵塞引起的误差。
压力传感器- FS系列触力传感器 1500g 的使用说明书
压力传感器FS 系列触力传感器能够在小型商用级别封装下提供精确、可靠的触力传感功能，传感器内含已技术成熟的经特殊微切削硅传感芯片，低功耗、无放大、无补偿的惠斯顿电桥设计在1500g 量程中输出恒定的mV 信号。
传感器的工作原理为：离子注入的压敏电阻受压弯曲时阻值发生变化，并正比于所施加的触力，触力是通过不锈钢插杆直接作用于传感器内部的硅敏感芯片，桥路电阻阻值正比与触力大小，桥路各电阻的变化产生对应的mV 输出信号。
传感器运用专利的模块结构，创新的弹性技术及工程模塑材料使传感器能承受5.5kg 的过压，不锈钢插杆提供极为优秀的机械稳定性，能适合各种应用场合，各种电气连接方式，包括预联线、PCB 、SMT 安装方式，传感器独特的设计能提供包括安装支架在内的多种可选项，也可根据客户要求特制。
典型运用：●医疗吸引泵● 肾透析仪● 机械手● 可调张力控制● 负载或压缩测量● 接触传感FS 传感器选型型号FSG-15N1A触力范围g1,500Min290Typ 360灵敏度(典型值)mV/grf typ.0.24过压g,max 5, 500引脚编号1、 1脚：VS （+）-被标明于引脚表面2脚；输出（+）3脚；接地（-）4脚：输出（-）2、 传感器可恒压或恒流供电，最大供电电压不超过12V ，最大供电电流不超过1.6mA 。
特点：● 紧凑的商业级封装●极低的偏差（典型值30微米@满量程）● 低重复性误差 (0.5%满量程）● 低线性误差 (0.5%满量程）● 低负载中心点偏离误差● 最小分辨率1克● 快速响应（1毫秒）● 低功耗● 很高的抗ESD 能力-10KV技术规格:@10.0±0.01VDC 供电，25˚C电源零点偏置零点漂移，25-0，25-50线性度，BFSL ，灵敏度温漂，25-0˚C 25-50灵敏度重复性反应时间输入阻抗输出阻抗重量ESD （直接接触-引脚与插杆）Min.----30---------------------------10Typ.100±0.5±0.5±5.00.24±0.2---5K 5K 2.0---Max.12+30±1.0------------1.0------------单位VDC mV mV %Span %SpanmV/grf %Span ms ohms ohms grams kV注：1、无补偿的触力传感器当恒流供电（1.5mA ）时，能补偿部分温漂。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Honeywell AWM3000传感器广州南创谭工美国Honeywell流量传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。
美国Honeywell流量传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，Honeywell AWM3000传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell流量传感器提供最佳的服务与解决方案。
有质量，交货，价值，和美国Honeywell流量传感器做的一切技术的不懈重点。
Honeywell AWM3000传感器图片：产品名称：Honeywell AWM3000传感器产品型号：AWM3000系列产品品牌：美国Honeywell流量传感器所属分类：气体质量流量传感器Honeywell AWM3000传感器以N2、CO2、Ar进行的激光校准接口：传感器有各种流量接口可选安装：Honeywell AWM3000传感器采用远程安装产品特性描述：Honeywell AWM3000传感器能承受50psi的共模压力，包含放大、线性修正、温度补偿和气体标定，Honeywell AWM5000流量传感器系列为文丘里流量管型外壳，可以测量最高至20升/分的流量，传感器最大压降2.25″水柱的气流，微桥芯片直接与气流接触，大大减少了由于通气孔或旁路堵塞引起的误差。
Honeywell AWM3000传感器小流量传感器为输出1-5V气体质量流量传感器，传感器内部集成发热器控制电路、双传感电路、差分放大电路，量程30sccm、200sccm、1000sccm。
Honeywell AWM3000传感器微差压双向流量系列传感器以极小流量检测为主，输出4～20mA，量程0～0.5″水柱、0～2″水柱、±1000sccm。
Honeywell AWM3000传感器自动化和控制解决方案美国Honeywell的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。
美国Honeywell的产品和解决方案，使客户能够捕获更多和更好的数据，更快的速度和整个无线景观，提高生产率，安全性和安全性，推动更好的决策，并降低了成本。
Honeywell AWM3000传感器航天美国Honeywell流量传感器的航空航天产品和服务用于全球几乎所有的商业和商务飞机经营的今天，以及国防和空间应用。
美国Honeywell提供综合航空电子系统，发动机，系统和服务解决方案，认真听取美国Honeywell的客户和重点放在最能满足他们的需求，使飞行更安全，更可靠，更高效，更具成本效益的技术。
Honeywell AWM3000传感器交通运输系统交通系统是一个世界级的技术和汽车制造商，其供应商和消费者的解决方案的领先供应商。
从节油和减少排放的涡轮增压器以提高安全制动盘式刹车片，鼓式制动器衬片根据本迪克斯®和Jurid的的销售售后制动产品™品牌名称，如产品，交通运输系统的技术，提高客运的效率和性能和世界各地的商业车辆。
Honeywell AWM3000传感器高性能材料和技术以开发和制造先进的材料和工艺技术，是人每天使用，以减少温室气体排放，阻止子弹，使生产的绿色燃料，增加炼油能力，加速药物发现，和保护药品的全球领先地位。
美国Honeywell的先进材料制造尼龙至计算机芯片医药包装产品，以及工艺技术由霍尼韦尔公司的UOP公司的形式大部分世界炼油厂的基础有效地生产汽油，柴油，喷气燃料，石油化工和生物燃料开发的关键。
美国Honeywell流量传感器Honeywell压力传感器DC002NDR4DC002NDC4DC001NDC4163PC01D48164PC01D76163PC01D75164PC01D37163PC01D36162PC01D162PC01G161PC01D143PC05D142PC30A Honeywell美国Honeywell流量传感器磁阻传感器HMC1053HMC1052/HMC1052L HMC1051Z HMC1022HMC1021S HMC1002HMC1001 Honeywell美国Honeywell流量传感器流量传感器AWM72P01AWM43600V AWM43300VH AWM43300V AWM42150VH AWM5104VN AWM5103VN AWM5102VN AWM5101VN AWM3303V AWM3300V AWM3201CR AWM3200V Honeywell美国Honeywell流量传感器电流传感器CSNK591-003CSNK591-002CSNK591-001CSNK591CSNJ481-007CSNJ481-004 CSNJ481-002CSNJ481-001CSNJ481CSNR161CSNF161CSNP661CSNE151-100 Honeywell美国Honeywell流量传感器光电液位传感器(load cells)LRNV31S41LRNR31N01LRNH31S41LLN865172-4LLN8651721LL101101LL105000 LL103101LL102101LLE205000LLE102000LLE101000Honeywell美国Honeywell流量传感器红外传感器SME2470-001SMD2440-002SEP8736-003SEP8706-003SEP8705-003SEP8506-003 SEP8505-003Honeywell美国Honeywell流量传感器霍尔传感器SR17C-J6SR16C-N SR13R-A1SR13C-A1SS94A1SS495A1SS495A SS496B SS49E SS49SS526DT SS51T SS566AT SS561AT SS543AT SS541AT SS513AT Honeywell 美国Honeywell流量传感器湿度传感器HIH-3602-C HIH-3602-L-CP HIH3610-004HIH3610-003HIH3610-002Honeywell 美国Honeywell流量传感器微差压传感器XCX30DNC XCX004DNC XCX01DNH DC001NDR5~DC030NDR5DC010NDC4Honeywell美国Honeywell流量传感器温度传感器HEL-777-A-U-1HEL-776-A-U-1HEL-776-A-T-1HEL-717-U-0-12-C1HEL-717-U-0-12-00HEL-717-T-0-12-C1HEL-717-T-0-12-00HEL-716-U-0-12-C1HEL-716-U-0-12-00HEL-716-T-0-12-C1HEL-716-T-0-12-00HEL-712-U-0-12-C1HEL-712-U-0-12-00HEL-712-T-0-12-C1HEL-712-T-0-12-00HEL-711-U-0-12-C1HEL-711-U-0-12-00HEL-711-T-0-12-C1HEL-711-T-0-12-00HEL-707-U-0-12-C1HEL-707-T-0-12-C1HEL-707-T-0-12-00HEL-705-U-0-12-C1HEL-705-U-0-12-00HEL-705-T-0-12-C1HEL-705-T-0-12-00HEL-700-U-0-B HEL-700-U-0-A HEL-700-T-0-BHEL-700-T-0-A美国Honeywell流量传感器Honeywell压力传感器DC002NDR4DC002NDC4DC001NDC4163PC01D48164PC01D76163PC01D75164PC01D37163PC01D36162PC01D162PC01G161PC01D143PC05D142PC30A142PC15A142PC30D142PC15D142PC05D142PC02D142PC01D142PC30G142PC15G 142PC05G142PC02G142PC01G141PC15G141PC05G141PC01G40pc standard26pc SMT26PC standard24pc SMT24PC standard FSL05N2C FSG15N1A HPB（气压计）PPT-R PPT Honeywell美国Honeywell流量传感器磁阻传感器HMC1053HMC1052/HMC1052L HMC1051Z HMC1022HMC1021S HMC1002HMC1001 Honeywell美国Honeywell流量传感器流量传感器AWM72P01AWM43600V AWM43300VH AWM43300V AWM42150VH AWM5104VN AWM5103VN AWM5102VN AWM5101VN AWM3303V AWM3300V AWM3201CR AWM3200V AWM3150V AWM3100V AWM2300V AWM2200V AWM2100V CSNL181Honeywell美国Honeywell流量传感器电流传感器CSNK591-003CSNK591-002CSNK591-001CSNK591CSNJ481-007CSNJ481-004 CSNJ481-002CSNJ481-001CSNJ481CSNR161CSNF161CSNP661CSNE151-100 CSLH3A45CSLA2GG CSLA2GF CSLA2GE CSLA2GD CSLA2EN CSLA2EL CSLA2EJ CSLA2DK CSLA2DJ CSLA2DH CSLA2DG CSLA2DE CSLA2CF CSLA2CE CSLA2CD CSLA1GF CSLA1GE CSLA1GD CSLA1EL CSLA1EK CSLA1EJ CSLA1DK CSLA1DJ CSLA1DG CSLA1DE CSLA1CH CSLA1CF CSLA1CE CSLA1CD Honeywell美国Honeywell流量传感器光电液位传感器LRNV31S41LRNR31N01LRNH31S41LLN865172-4LLN8651721LL101101LL105000 LL103101LL102101LLE205000LLE102000LLE101000Honeywell美国Honeywell流量传感器红外传感器SME2470-001SMD2440-002SEP8736-003SEP8706-003SEP8705-003SEP8506-003 SEP8505-003SE5470-004SE5470-003SE5455-003SE3470-003SE2470-002SE2460-003SE1470-003L SE1470-003SE1450-004L SE1450-003L SDP8614-301 SDP8604-301SDP8406-003SDP8405-003SDP8371-001SDP8276-001SDP8106-001 SDP8105-001SDP8004-301SD5600-001SD5491-004SD5443-003SD2440-004 SD2440-003SD1440-004L SD1440-003L SPX1189-003SPX1189-002HOA6983-T55 HOA6981-T55HOA6971-N55HOA6961-T51HOA1877-002HOA1406-001HOA1404-001 HOA0963-T51HOA0963-N51]HOA0902-012HOA0901-012HOA0890-L51HOA0870-N51HOA0865-T51HOA0860-T55HOA0860-T51HOA0860-N51HOA0860-L51 HOA0709-011HOA0708-001HLC2705-001HLC2701-001HLC1397-032HLC1395-002 HoneywellHoneywell AWM3000传感器技术参数以《OIML60号国际建议》92年版为基础，最新具体变化可查看《JJG669—Honeywell广州南创传感器事业部检定规程》。