博达8510交换机与H3C设备链路聚合报告
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
博达8510交换机与H3C 设备链路聚合报告
1. 拓扑图
SMB1
SMB2
BD8510
H3C
G1/4E1/0/4
2. 测试步骤
1、BD8510的G4/1，G4/2，G1/3,G1/4 分别与H3C 的Ethernet1/0/1，Ethernet1/0/2，Ethernet1/0/3, Ethernet1/0/4相连；SMB1端口与BD8510的G4/12相连，SMB2端口与H3C 的Ethernet1/0/5相连；
2、将BD8510与H3C 相连的四个端口聚合为lacp 聚合端口；
3、SMB1上配置20条源mac 地址不同的数据流，单播打向SMB2端口；
3. 测试结果
通过上表可以证实，博达8510交换机在4个接口上的链路聚合实现了负载均衡的功能。由于对接的H3C 设备是百兆接口交换机，故还需要东方有线提供相应试点与设备，在不影响业务的情况下做小规模测试。
博达交换机8510详细接口信息如下： Switch_config#show inter g4/1 GigaEthernet4/1 is up, line protocol is up
Hardware is GigaEthernet-TX, address is 00e0.0fa7.a2f0 (bia 00e0.0fa7.a2f0) MTU 1500 bytes, BW 1000000 kbit, DLY 10 usec
Encapsulation ARPA
Auto-Duplex(Full), Auto-Speed(100Mb/s), Flow-Control Off
5 minutes input rate 425580 bits/sec, 415 packets/sec
5 minutes output rate 26978493 bits/sec, 2634
6 packets/sec
Received 55285 packets, 7076648 bytes
0 broadcasts, 20 multicasts
0 discard, 0 error, 0 PAUSE
0 align, 0 FCS, 0 symbol
0 jabber, 0 oversize, 0 undersize
0 carriersense, 0 collision, 0 fragment
0 L3 packets, 0 discards, 0 Header errors
Transmited 3504129 packets, 448521608 bytes
0 broadcasts, 158 multicasts
0 discard, 0 error, 0 PAUSE
0 sqettest, 0 deferred
0 single, 0 multiple, 0 excessive, 0 late
0 L3 forwards
Switch_config#show inter g4/2
GigaEthernet4/2 is up, line protocol is up
Hardware is GigaEthernet-TX, address is 00e0.0fa7.a2f1 (bia 00e0.0fa7.a2f1) MTU 1500 bytes, BW 1000000 kbit, DLY 10 usec
Encapsulation ARPA
Auto-Duplex(Full), Auto-Speed(100Mb/s), Flow-Control Off
5 minutes input rate 51 bits/sec, 0 packets/sec
5 minutes output rate 28163024 bits/sec, 27502 packets/sec
Received 15 packets, 1920 bytes
0 broadcasts, 15 multicasts
0 discard, 0 error, 0 PAUSE
0 align, 0 FCS, 0 symbol
0 jabber, 0 oversize, 0 undersize
0 carriersense, 0 collision, 0 fragment
0 L3 packets, 0 discards, 0 Header errors
Transmited 3850433 packets, 492855352 bytes
0 broadcasts, 36 multicasts
0 discard, 0 error, 0 PAUSE
0 sqettest, 0 deferred
0 single, 0 multiple, 0 excessive, 0 late
0 L3 forwards
Switch_config#show inter g1/3
GigaEthernet1/3 is up, line protocol is up
Hardware is GigaEthernet-TX, address is 00e0.0fa7.a382 (bia 00e0.0fa7.a382) MTU 1500 bytes, BW 1000000 kbit, DLY 10 usec
Encapsulation ARPA
Auto-Duplex(Full), Auto-Speed(100Mb/s), Flow-Control Off
5 minutes input rate 47 bits/sec, 0 packets/sec
5 minutes output rate 29643954 bits/sec, 28949 packets/sec
Received 15 packets, 1920 bytes
0 broadcasts, 15 multicasts
0 discard, 0 error, 0 PAUSE
0 align, 0 FCS, 0 symbol
0 jabber, 0 oversize, 0 undersize
0 carriersense, 0 collision, 0 fragment
0 L3 packets, 0 discards, 0 Header errors
Transmited 4342404 packets, 555826904 bytes
0 broadcasts, 42 multicasts
0 discard, 0 error, 0 PAUSE
0 sqettest, 0 deferred
0 single, 0 multiple, 0 excessive, 0 late
0 L3 forwards
Switch_config#show inter g1/4
GigaEthernet1/4 is up, line protocol is up
Hardware is GigaEthernet-TX, address is 00e0.0fa7.a383 (bia 00e0.0fa7.a383) MTU 1500 bytes, BW 1000000 kbit, DLY 10 usec
Encapsulation ARPA
Auto-Duplex(Full), Auto-Speed(100Mb/s), Flow-Control Off
5 minutes input rate 45 bits/sec, 0 packets/sec
5 minutes output rate 30200931 bits/sec, 29493 packets/sec
Received 15 packets, 1920 bytes
0 broadcasts, 15 multicasts
0 discard, 0 error, 0 PAUSE
0 align, 0 FCS, 0 symbol
0 jabber, 0 oversize, 0 undersize
0 carriersense, 0 collision, 0 fragment