video-manual-ns
HDMI 4X1 四通道多视图器说明书
1HDMI 4X1 QUAD MULTI-VIEWERWITH SEAMLESS SWITCHERQuick Installation GuideBG-MV41A2INTRODUCTION:FEATURES:APPLICATION:● Compliant with HDMI 1.3a, HDCP 1.2● Supports multiplexed HDMI 4-input and 1-output ● Supports up to 1080p60 High Definition resolution● Support 4 by 1 Quad Multi-viewer and seamless switch (with same resolution)● Support button, IR control, RS232 control ● Support scaler up, scaler down function ● Support multi output resolution● Video Switcher● Surveillance for multi camera ● Car quad monitor● Video format converter ● Multimedia panelThis HDMI 4X1 Switch is a high performance 4 by 1 Quad Multi-Viewer with seamless switcher. It supports four HDMI input sources to bedisplayed on one screen with five multiview mode. As a switcher, it can also seamlessly switch the four HDMI input freely.The product can be controlled by various ways: through the front panel button, IR, RS232 control.CONNECTION DIAGRAM:CONNECTION AND OPERATION:● 1× Main unit● 1× 12V/DC, 2A Power Supply ● 1× User Manual ● 1× Remote control1: IN1, 2, 3, 4 LED: These blue LED illuminates when the device is connected with the sources.2: HDMI Input1, 2, 3, 4: These HDMI Inputs are where you connect the HDMI source output from DVD, PS3, Set-top Box and Notebook.1: 12V/DC: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.2: POWER LED: This blue LED illuminates when the device is connected with power supply.3: HDMI OUTPUT: The HDMI is where you connect the HDTV or monitor with HDMIcable for input source display.4: RS232: Connect the RS232 port to the PC or notebook by RS232 Cable.5: Audio BUTTON: Press this button to select the audio from the input sources.6: MODE BUTTON: Press this button to select the multi-view display mode.7: IR :Remote control receiver window.1. Connect the signal sources such as Blu-Ray Player, game console,audio/video receiver, satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Switcher inputs.2. Connect the HDMI output of the HDMI Switcher to a high-definition display device such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces with a HDMI cable to HDMI Switcher output.3. The Switcher is powered by an external power supply which is included.Connect power first to the source, then to the Switcher and then to HDTV or projector.4. The input source can be controlled from the display. The switcher has the capability of being controlled via Front push button, Remote control or RS232 Control.PACKAGE CONTENTS:PRODUCT OVERVIEW:Front Panel:Back Panel:OUTPUTINPUT INPUTINPUTINPUTHDTVBlu-Ray DVD PlayerBlu-Ray DVD PlayerBlu-Ray DVD PlayerBlu-Ray DVD PlayerH D M I 4x 1 Q u a d M u l t i -V i e w e r W i t h S e a m l e s s S w i t c h e rDETAIL DESCRIPTION OF DISPLAY MODE:REMOTE CONTROL:PC CONTROLLER USER GUIDE:SPECIFICATIONS:The product provides 5 multi-viewer display modes as below Mode1 ~ 5.MODE1: The four HDMI input sources are displayed in 2x2 on one screen.MODE2: The four HDMI input sources are displayed with one bigger and three smaller windows onone screen.MODE3: The four HDMI input sources are displayed H-spilt on one screen.MODE4: The two HDMI input sources are displayed in 2x1 on one screen.MODE5: This is the full screen mode, press IN1 ~ IN4 button will select the corresponding channel and display in full screen as a seamless switcher.InstallationThe PC controller is green software. Just use a cable to connect the PC via RS232 port and copy “BG-MV41A Quad multi-viewer.exe” to PC to complete installation.Preparation1. Connect PC and multi-viewer by RS232 cable (headers of both sides of cable should be FEMALE)2. Power-up multi-viewer3. Double click BG-MV41A Quad multi-viewer.exe icon to run it, then see the following picture.1. Select PC connect COM port ，to make sure your PC’s COM port is the same as the software’s COM port(default COM6).If not, please revise the COM port in the software.Then double click to connect or disconnect PC and multi-viewer.2. Select the HDMI output resolution.3. Select the audio from the input sources4. Select the output mode, see the detail description of display mode.Signal Inputs/OutputMaximum Single Link Range HDMI Input/Output Connector Operating Frequency Vertical Frequency Range Video Amplifier Bandwidth Resolutions Input ResolutionOutput Resolution Mechanical Data Dimensions WeightChassis Material ColorEnvironmentalOperating Temperature Operating Humidity Storage Temperature Storage Humidity Power Requirement External Power Supply Power Consumption(max)Regulatory Approvals Main UnitPower Supply1920x1080@60Type A 19 pin 50/60Hz 2.25Gbps480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz,1080i50/60Hz,1080p24/25/30/50/60Hz 720p,1080p148.5mm(W) X 103mm (D) X 21.5mm(H)342g Metal Black0 ℃to +70℃10% to 85 % RH (no condensation)-10℃to +80℃5% to 90 % RH (no condensation)12V DC@2A 10 WFCC,CEUL,CE,FC C, REACH, ROHS56ON/OFF : Power on/off switch.Mode select button (M1-M5,H,1/2,3/4,Ch1-Ch4, ): Press these buttons,the quad multi-viewer will select the Corresponding mode; see the detail description of display mode Blank button : No functionAudio Select button (♪1- ♪4): Press these buttons to select the audio from the input sources Mute button : Turn off SoundH/S Resolution button :upscale 720P signal into 1080P or downscale 1080P signal into 720P .1 23 412443The unit provides a path to pass through the RS232 signal, connect to your RS232 devices, such as PC,IP Camera, Creston control panel, Smart Matrix, printer and Scanner and so on. It works when TX, RX and your RS232 devices baud rate is the same.RS-232:WARRANTY:MISSION STATEMENT:910BZBGEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZBGEAR is the solution for small to medium-sized applications requiring the latest professional products in AV. We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZBGEAR catalog. You’ll notice comparably lower prices with BZBGEAR solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a do-it-yourselfer, BZBGEAR offers the solutions to allow you to focus on your project and not your budget.BZBGEAR wants to assure you peace of mind. We're so confident in the quality of our products that along with the manufacturer's one-year limited warranty, we are offering free second-year warranty coverage upon registration*!Taking advantage of this program is simple, just follow the steps below:1. Register your product within 90 days of purchase by visiting /warranty.2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.Forquestions,**************************************************.For complete warranty information, please visit /warranty or scan the QR code below.*Terms and conditions apply. Registration is required.。
星辰科技SVID2USB2NS视频捕捉线缆（组合和S-Video输入）用户手册说明书
DE: Bedienungsanleitung - FR: Guide de l'utilisateur - ES: Guía del usuario - IT: Guida per l'uso - NL: Gebruiksaanwijzing - PT: Guia do usuário - *actual product may vary from photosSVID2USB2NSVideo Capture Cable withComposite and S-Video InputFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to . Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by , or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.Table of ContentsIntroduction (1)Installation (2)Driver Installation (2)Application Installation (3)Hardware Installation (4)Operation (4)Option (5)General (5)Encoder Property (5)Troubleshooting (7)Specifications (9)Technical Support (10)Warranty Information (10)IntroductionThe SVID2USB2NS USB 2.0 S-Video and Composite video Capture Cable lets you connect devices that output S-Video or Composite video to a computer, through an available USB 2.0 port.The perfect solution for bridging a computer and an S-Video or Composite video source, the capture cable offers real time MPEG 1, MPEG 2 and MPEG 4 recording. Small enough to fit in the palm of your hand, the Capture Cable is a great solution for mobile applications and integrates seamlessly with laptop and desktop computers.If you require audio with your video capture please see ’s S-Video to USB 2.0 Video Capture Cable(SVID2USB).Backed by a 2-year warranty and free lifetime technical support. Packaging Contents• 1 x SVID2USB2NS video capture cable• 1 x User Manual• 1 x Driver CDSystem Requirements• USB 2.0 equipped computer• Pentium 4 - 1GHz or above or equivalent AMD processor• 128MB of RAM• Microsoft Windows® 2000 SP4, XP SP2 or above, or VistaInstallationUSB 2.0 connector: Connect to USB 2.0 port of your computer S-Video input: S-Video input from external A/V device (e.g. VCR)Composite video input: Composite video input from external A/V Device (e.g. VCR)* If you want capture audio, please connect audio directly to Line-in of your Sound B 2. 0 connector Composite input S-Video input Driver InstallationNote: Do not connect SVID2USB2NS adapter to computer USB port before driver installation!Note: Please make sure your computer has USB2.0 port correctly installed and functioning !! ( Please update your Windows® XP to at least SP2, or Windows® 2000 to SP4, and updating the USB 2.0 host controller drivers before installation to make sure the computer’s USB 2.0 is functioning correctly)1. Please insert “Multimedia Installation Kit” CD-ROM into your CDROM drive; AutoRun will play; (if AutoRun does not run, please go to “My Computer” and double click the CD-ROM drive).2. From the menu, please select the “GrabBeeX-light” product.3. Please select “Device Driver” on the next screen. * Note: In Vista, windows will get a pop up dialogue box. Choose “Allow” to continue the installation.4. Click “Next”.5. Complete Setup Wizard.6. Click “Finish”, then please restart the computer.Application Installation1. Please insert “Multimedia Installation Kit” CD-ROM into your CDROM drive; AutoRun will play; (if AutoRun does not run, please go to “My Computer” and double click the CD-ROM drive).2. From the menu, please select the “GrabBeeX-light” product.3. Please select “Application Software” on the next screen.4. Please select “GrabBee”.5. Welcome to the InstallShield wizard; Click “Next”.6. Select the language you will use for GrabBee; then click “Set”.7. Choose the destination location; Click “Next”.Note: Under Windows Vista, steps 8 to 17 will automatically be skipped. Please do not worry as this is normal.8. Install Windows Media Format 9 Series Runtime Setup;9. Click “Yes”.10. License agreement; Click “Yes”.11. Finished Windows Media Format 9 Series Runtime installation;12. Click “OK”13. License for Windows Media Tools Setup; Click “Yes”.14. Windows Media Tools Setup; Click “Next”.15. Create folder; Click “Yes”.16. Installation Options; Click “Next”.17. Installation Directory; Click “Finish”.18. Setup Complete; Click “OK”.19. InstallShield Wizard Complete; Click “Finish” then please restart the computer.After the AP software is installed, three icons will now be shown on screen:GrabBee : GrabBee software main programRecord Files : Click to see your record fi lesSnapshot : Click to see your capture still image fi lesHardware InstallationAfter the computer restarts, please plug the SVID2USB2NS device into the computer’s USB 2.0 port; System will now detect the new device and install it automatically. Please check whether the SVID2USB2NS driver was installed successfully in your computer. OperationStarting : Please click the “GrabBee” icon. After starting the application, you can see video window as below.Video Window: Please move mouse cursor into Video window and right click, function menu will appear as below.Resolution : There are 4 resolution video preview you can select,NTSC mode : 352x240, 640x480, 720x480, Full screenPAL mode : 352x288, 640x480, 720x576, Full screenOptionGeneral• Lists your hard disk space information.• Snapshot default storage path : The location to saved captured image fi les.• Clip default storage path : Location to saved recorded video fi les.• Video Format : Choose your correct video format input.• Set Recording Time : Sets Recording Time length.Encoder Property• Video Setting: Recording fi le type format AVI, MPEG-1, MPEG-2, VCD, SVCD, DVD, WMV, *MP4 selection (if you want DVD burning, please choose DVD mode)• Profile: Video Size, Frame Rate, Video Quality, Video Bitrate setting; Information column will display your settingNote: File format ‘MP4’ will not appear as a selectable option under Windows Vista. Schedule Record : Set One-time schedule here. Input your Start and Stop time, Date, Video Source, and File Name. Click ‘Add’ after input then ‘OK.’Video Input : Switch between Composite or S-Video input.Slide Bar : Move to any video position during playback.Color Setting : Brightness/Contrast/Hue/Saturation adjustment.Mute : Volume On/OffPause : Pauses the playback fi leRecord : Click this button to start recording a video. After you click “Stop“ button,a table will be shown, which asks you to rename or save the fi le; default fi le name format is “Mddhhmmss”.M : Month (Jan->1, Feb->2….Oct->O, Nov->N, Dec->D)dd : Date, hh : Hour, mm : Minute, ss : SecondStop : Stop Recording and Playback;Playback : Play the recorded fileSnapShot : Image capture resolution is the same as Preview mode’s Resolution; click SnapShot and a table shows as below.You can “Save”, “Save All”, “Delete”, “Delete All” image fi les, fi le name’s format is “Mddhhmmssn”.M : Month (Jan->1, Feb->2….Oct->O, Nov->N, Dec->D)dd : Date; hh : Hour; mm : Minute; ss : Secondn : NumberAlbum: The Album will show all capture fi les including image and video. Please click “Clips” or “Images” to fi nd all listed; you can find each fi le’s information, or preview the recording video in this window.Full Screen mode : Double click inside your video window to switch back and forth between full screen and previous screen size.TroubleshootingQ1 : Why can’t my system detect the SVID2USB2NS?A1 : Check that you’ve enabled USB 2.0 in the motherboard BIOS setup.Please make sure that your system has the latest USB 2.0 host driver.For Windows® XP, please upgrade to Service Pack 2 or above.For Windows® 2000, please upgrade to Service Pack 3 or above.Q2 : Why can’t I see video display?A2 : Perhaps the video system setup is incorrect; please check your hardware connection and choose the correct Video Format from the Options menuPlease make sure that your system has the latest USB 2.0 host driver.For Win XP, please upgrade to Service Pack 2 or above.For Win 2000, please upgrade to Service Pack 3 or above.Q3 : Why is the resolution always in 320x240 under preview mode?A3 : It’s because you plugged the SVID2USB2NS in a USB 1.1 port, or perhaps even though your USB port is 2.0, it may not have upgraded to USB 2.0 drivers. Please make sure your USB port is USB 2.0, and have already upgraded the USB 2.0 host driver available from Microsoft’s Website.Q4 : Why does the system show “High Speed device plug into Full speed USB port…”A4 : Please make sure your system supports USB 2.0 hardware.Please make sure that you’ve installed USB 2.0 Host drivers.Q5 : Why do I get unstable video during preview and recording?A5 : If you are using Ultra DMA hard disk, please updated the latest driver of IDE ATA/ ATAPI controller. Certain motherboards’ bundled driver are not of the latest version, we suggest that you use Windows’ own system bundled driver.Q6 : Why can’t I hear anything under preview mode?A6: The audio needs to go through sound card’s Line-in, please check your sound card setting.Q7 : How can I get a minimum number of dropped frames during video capture?A7 : The best recording performance depends on your computer system performance, but you can also take some steps described below to improve your performance.• Try lowering the resolution format you record in.• Enable hard disk drive DMA ; Go to My Computer->Control Panel ->System->Hardware->Device Manager->Disk drives to setup.• Try and make more available free space on the hard disk drive.• Use a hard disk drive with speed of more than 7200 rotation per minute• Disable Power Management in BIOS.• Disable Power Saving mode of monitor.• Close unnecessary/unused programs in your system.• Defrag your hard disk.• Try not to run any other program(s) during recording.Q8 : I can preview video but when recording, the system crashed/hanged.A8 : Please make sure you’ve install DirectX 9.0 or above.• Your VGA card driver may be incompatible with DirectDraw, please update your VGA driver.• Too many programs might have occupied available memory.Close unnecessary/unused programs.• Please lower your hardware acceleration; you can go to My Computer->Control Panel->Display->Settings->Advanced to adjust it.Q9 : When I start the GrabBee software, program automatically closed.A9 : Please check to see that your sound card driver was installed successfully.SpecificationsTechnical Support’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit /support and access our comprehensive selection of online tools, documentation, and downloads.For the latest drivers/software, please visit /downloads Warranty InformationThis product is backed by a two year warranty.In addition, warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.Limitation of LiabilityIn no event shall the liability of Ltd. and USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.Hard-to-find made easy. At , that isn’t a slogan. It’s a promise. is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions.We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.Visit for complete information on all products and to access exclusive resources and time-saving tools. is an ISO 9001 Registered manufacturer of connectivity and technology parts. was founded in 1985 and has operations in the United States,。
X-Video 卡用户手册说明书
X-SeriesExpansion CardsX-Video CardUser’s Guidev1.0 - February 2006X-Video – User’s GuideWarningsFCC warningThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference whenoperated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energyand, if not installed and used in accordance with the instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely to cause harmful interference, in whichcase the user will be required to take whatever measures necessary to correct the interference at his own expense.Copyright NoticeThe Apogee X-Video card is a computer-based device, and as such contains and uses software in ROMs. Thissoftware, and all related documentation, including this User’s Guide contain proprietary information which isprotected by copyright laws. All rights are reserved. No part of the software and its related documentation may becopied, transferred, or modified. You may not modify, adapt, translate, lease, distribute, resell for profit or createderivative works based on the software and its related documentation or any part thereof without prior writtenconsent from Apogee Electronics Corporation, U.S.A.Declarations of ConformityThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference(2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmful inteference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Re-orient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a different circuit from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.NOTE: The use of non-shielded cable with this equipment is prohibited.CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority tooperate the equipment.Apogee Electronics Corporation, 1715 Berkeley St., Santa Monica, CA 90404.Betty Bennett, CEO.Industry Canada NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numériquede la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.Declaration of Conformity – CEApogee Electronics Corporation hereby declares that the product, the X-Video card, to which this declaration relates, is in material conformitywith the following standards or other normative documents:• EN50081-1/EN55022; 1995• EN50082-1/IEC 801-2, 3, 4; 1992following the provisions of:• 73/23/EEC – Low Voltage Directive• 89/336/EEC – EMC DirectiveDeclaration of Conformity – JapanApogee Electronics Corporation hereby declares that the X-Video card, to which this declaration relates, is in material conformity with the VCCIClass A standard.Declaration of Conformity – AustraliaApogee Electronics Corporation hereby declares that the X-Video card is in material conformity with AN/NZS standard requirements.X-Video – User’s GuideRegistration and Warranty InformationBe sure to register your X-Video card, either by filling in the enclosed Registration Card or by completing the on-line registration form at our Web site: /support/. If you do so, Apogee can contactyou with any update information. As enhancements and upgrades are developed, you will be contacted at theregistration address. Firmware updates are free for the first year of ownership unless otherwise stated. Pleaseaddress any inquiries to your dealer or directly to Apogee at:APOGEE ELECTRONICS CORPORATION,1715 Berkeley St., Santa Monica, CA 90404, USA.TEL: (310) 548-9394, FAX: (310) 584-9385Web: /APOGEE ELECTRONICS CORPORATION warrants this product to be free of defects in material andmanufacture under normal use for a period of 12 months. The term of this warranty begins on the date of sale tothe purchaser. Units returned for warranty repair to Apogee or an authorized Apogee warranty repair facility willbe repaired or replaced at the manufacturer’s option, free of charge.ALL UNITS RETURNED TO APOGEE OR AN AUTHORIZED APOGEE REPAIR FACILITY MUST BEPREPAID, INSURED AND PROPERLY PACKAGED, PREFERABLY IN THEIR ORIGINAL BOX. Apogeereserves the right to change or improve design at any time without prior notification. Design changes arenot implemented retroactively, and the incorporation of design changes into future units does not imply theavailability of an upgrade to existing units.This warranty is void if Apogee determines, in its sole business judgment, the defect to be the result of abuse,neglect, alteration or attempted repair by unauthorized personnel.The warranties set forth above are in lieu of all other warranties, expressed or implied, and Apogee specificallydisclaims any and all implied warranty of merchantability or of fitness for a particular purpose. The buyeracknowledges and agrees that in no event shall the company be held liable for any special, indirect, incidental orconsequential damages, or for injury, loss or damage sustained by any person or property, that may result fromthis product failing to operate correctly at any time.USA: Some states do not allow for the exclusion or limitation of implied warranties or liability for incidental orconsequential damage, so the above exclusion may not apply to you. This warranty gives you specific legalrights, and you may have other rights which vary from state to state.Service InformationThe X-Video card contains no user-serviceable components: refer to qualified service personnel for repair orupgrade. Your warranty will be voided if you tamper with the internal components. If you have any questions withregard to the above, please contact Apogee.In the event your X-Video card needs to be upgraded or repaired, it is necessary to contact Apogee prior toshipping, and a Return Materials Authorization (RMA) number will be assigned. This number will serve as areference for you and helps facilitate and expedite the return process. Apogee requires that shipments be pre-paid and insured — unless otherwise authorized in advance.IMPORTANT: ANY SHIPMENT THAT IS NOT PRE-PAID OR IS SENT WITHOUT AN RMA NUMBER WILLNOT BE ACCEPTED.X-Video – User’s GuideOWNER’S RECORDThe serial number is located on the top of the unit. We suggest you record the serialnumber in the space provided below. Refer to it whenever you call an authorized ApogeeElectronics repair facility or the manufacturer. Please be sure to return your completedwarranty card immediately!X-Video card Serial No._________________________________________________Purchase Date__________________________________________________________Dealer_________________________________________________________________Phone_________________________________________________________________Address________________________________________________________________CAUTION:Any changes or modifications not expressly approved by APOGEE ELECTRONICSCORPORATION could void your authority to operate this equipment under the FCC rules.Table of Contents Introduction X-Video Requirements Getting Started Quickly X-Video I/O X-Video Operating Modes Installing the X-Video Card User’s GuideX-Video Card.......................................................................................................................3...................................................................................................3.................................................................................................3........................................................................................................................3............................................................................................3.. (4)X-Video – User’s GuideIntroductionThe Apogee X-Video card expands the video capability of the Big Ben Master Clock, offering one video input and three video outputs.X-Video RequirementsThe X-Video card operates exclusively with Apogee’s Big Ben Master Clock; Big Ben firmware 2.0 or higher must be installed.To easily determine Big Ben’s firmware version, power on Big Ben and observe the pattern in which the termina-tion LEDs light during boot-up; if version 2 firmware is installed, the red LEDs light in a descending pattern while the green LEDS light in an ascending pattern.Getting Started Quickly1 Install the X-Video card (see p. 5)2 Install Big Ben version 2.0 firmware (if required).3 Connect video inputs and outputs to the appropriate X-Video BNC, and set Big Ben to operate the X-Video card in Master, Slave or Standalone mode (as described on p.4).X-Video I/O1 (terminated) video input - accepts any analog composite video signal.3 video black burst outputs – output is formatted as a black burst signal. By installing a shunt across jumper P8 (on the X-Video card as shown below), a 75% color bar is generated on the outputs.Please note that when an X-Video card is installed in a Big Ben, Big Ben’s chassis-mounted Video/Word Clock BNC input will only accept word clock signals; video reference input signals should be connected to the X-Video IN BNC connector.X-Video – User’s GuideX-Video Operating ModesOnce the X-Video card has been installed, new CLOCK SOURCE selections become available on Big Ben; these selections configure the X-Video card into one of three operating modes: Master, Slave and Standalone.Master – In Master mode, the X-Video card generates the reference for all Big Ben’s outputs as well as the three X-Video card’s outputs; the X-Video output format may be set to NTSC, PAL or B&W (black & white). Signal present at the X-Video IN BNC is ignored. To configure the X-Video card to operate in Master mode, follow these steps:1 Scroll through Big Ben’s CLOCK SOURCE selections until both INT and VIDEO are lit.2Press the NEXT button until the sample rate flashes, and select the desired sample rate.3Press the NEXT button again until one of the three video formats flashes (NTSC, PAL, B&W), and select the desired X-Video output format.Slave – In Slave mode, Big Ben is locked to the video reference signal present at the X-Video IN BNC. To configure the X-Video in Slave mode, scroll through Big Ben’s CLOCK SOURCE selections until VIDEO is lit; the video format is automatically detected as being either NTSC, PAL or B&W (black & white) format.Standalone- When Big Ben Clock Source is set to any setting besides INT VIDEO or VIDEO, the X-Video card will ac-cept a video input and regenerate it to the 3 video outputs, but with no clock synchronization with the selected Big Ben CLOCK SOURCE. Thus, the X-Video card acts as an asynchronous distribution amplifier.X-Video – User’s Guide Installing the X-Video cardYour X-Video card should include the following:1 X-Video circuit board1 X-Video Coverplate2 aluminium standoffs1 plastic standoff1 manual1 Remove the top cover of Big Ben.2 Remove the Option Card coverplate, and set aside the screws for later use.3 Remove the two interface circuit board screws indicated at left, and set them aside for later use4 Install the two aluminium standoffs in the threaded holes vacated by the screws.5 On the X-Video card, install the plastic standoff in the hole adjacent to the multi-pin motherboard connector.6 Install the X-Video Coverplate, and secure it to the host interface using two screws from Step 2.7 Insert the BNC connector end of the X-Video card through the ap-propriate cutouts in the coverplate, and carefully place the multi-pin motherboard connector in the mating connector found on the host interface motherboard.8 After verifying the alignment of the multi-pin and the mating con-nectors, firmly press down on the X-Video card, over the connector, until the pins are completely seated in the mating connector. 9 Re-install the circuit board screws from Step 3 in the locations indicated below.10 Replace the top cover of Big Ben.29X-Video card USER’S GUIDE - v1.0 - February 2006 Text by: Roger RobindoreGraphics by: Sean McArthur。
VM5000自动化视频测量系统说明书
Features & BenefitsAutomates Test of Consumer HDTV Video Devices Automates VESA ComplianceTest for PC Graphics Devices Fast, Accurate and Reliable Video Measurements Comprehensive Component Analog Video Signal Analysis SD, HDTV and RGBHV Component Analog Format Support Picture, Vector and Waveform DisplaysCompanion Test Signal Packages Time Saving Test Utilities Pass-fail Limit Testing Automatic Report Generator Video Measurement Accessories Complete DPO Functionality1GHz Bandwidth, 4 Channels Bright 10.4"Display GPIB Remote Control LAN Connectivity CD-RW DriveApplicationsDesign ValidationStandards Compliance Testing Quality ControlInstallation and Troubleshooting Automated Manufacturing Test Off-air Video Systems TestAutomated Video Measurement SetVM5000The VM5000 automates video testing of consumer HDTV and PC graphics devices such as digital set-top boxes,multi-media PCs, graphics cards and video semiconductors. It addresses the needs of engineers developing and deploying the next generation of video devices for the digitally connected home.Unrivaled performance in terms of speed,accuracy and reliability has made the VM5000 the choice of industry leaders for design validation, quality control and ATE applications.Unlike conventional instruments, the VM5000 integrates acquisition hardware,optimized video measurement algorithms,test signal files and accessories into a cohesive test system solution. Product verification activities that previously took hours or days to complete can now be completed in seconds or minutes.Offering near plug-and-play video meas-urement capability , even unskilled operators can reliably assess video output signal quality. The conformance of signals to specifications is reported with obvious pass or fail results, with signal distortions clearly identified for further analysis. The VM5000 stands alone as the only automatic video analyzer capable of supporting SD, HDTV and PC graphics signal formats. Offering a full 1GHz band-width and 5GS/s sample rate, the VM5000is well suited to the demands of measuring high-resolution HDTV and high-frequency PC graphics video signals. Traditional DTV formats from 480i through 1080i and either RGB or YPbPr color space are supported in Options SD and HD. Option VGA supports common analog RGBHV signal resolutions from 640x480p through 2048x1536p, and pervasive refresh rates from 50Hz through 100Hz.The ultimate solution for component analog video signal analysis, the VM5000 delivers comprehensive characterization of video fidelity , signal quality and standards compli-ance. With available options, the instrument automatically assesses conformance of video signals to applicable EIA-770.x,SMPTE-274M, 296M and VESA standards.Traditional “TV” signal fidelity is evaluated utilizing industry-accepted parameters,making 150 individual measurements automatically in less than 15seconds. PC graphics signal fidelity is assessed via comprehensive RGB video and HV sync measurement parameters made in accordance with VSIS test procedures.Preloaded reference and limit files enableAutomated Video Measurement Set VM5000Automated Video Measurement SetVM5000Video Measurement • /video 3Automated Video Measurement Set VM5000Video Measurement • /video 5Automated Video Measurement SetVM5000Automated Video Measurement Set VM5000Video Measurement • /video 7Automated Video Measurement SetVM5000Time-saving Test Utilities Picture Mode.Automated Video Measurement Set VM5000Video Measurement • /video9Automated Video Measurement SetVM5000CharacteristicDescriptionColor Bar Measurement Accuracy ±2mV ±1.5% of readingMeasurement of all 8 bar levels,displayed in absolute(mV) values.YPbPr or RGB formats Noise Measurement Range and AccuracyUnweighted and Weighted–20 to –60dB ±1dB Specification requires 30MHz bandwidth filter –60 to –70dB ±2dBsetting.Trigger on CH 4 required for measurements below –60dB.Noise measurement bandwidth select-able,200KHz to 250MHz.Unified Weighting FilterNoise Floor<–76dB,30MHz noise bandwidth Typically <–80dB,30MHz noise bandwidthMultiburst and Frequency Response Measurements AccuracyFlag Amplitude±2mV ±1.5% of reading1MHz to 10MHz Packets ±0.5dB Measurement relative to reference flag amplitude10 to 30MHz Packets ±0.75dB Frequency Readout ±0.1MHzMultiburst packet frequency is measuredand displayed Non-linearity Measurement AccuracyNon-linearity±1.5%Non-linearity measurement using a ramp test signal.Incremental linearity reported over five equally spaced intervals,as well as an overall linearityfigure for each channel Transient Response Measurement AccuracyRise Time and Fall Time ±5ns K2T±1%Overshoot and Undershoot ±1.5% of readingRise and Fall Settle Times±5ns*1For VM5000 Instrument Characteristics, please refer to the TDS5104B datasheet.Automated Video Measurement SetVM5000Characteristic Accuracy DescriptionVideo Measurement • /video 11Automated Video Measurement SetVM5000Automated Video Measurement Set VM500012Video Measurement • /video 13Automated Video Measurement SetVM5000Automated Video Measurement SetVM5000Ordering InformationVM5000 –Automatic Video Measurement Set.Includes:1GHz,5GS/s,4 channel digital phosphoroscilloscope,Accessory Pouch (016-1935-00),Front Cover (200-4651-00),Mini Keyboard(118-9402-00),Mouse (119-6936-00),Terminations 75ΩBNC (Qty 4) (011-0102-03),BNC T’s (Qty 4),(103-0030-00),VM5000 UserManual (071-1522-01),TDS5000 QuickstartManual (071-1355-02) VM5000 Product softwareCD-ROM (020-2565-01),VM5000 Programmersmanual (.pdf file).TDS5000B Series ProductSoftware CD-ROM (063-3692-03),TDS5000BSeries Operating System Restoration CD-ROM(063-3759-00),GPIB Programmer’s Reference,Optional Applications Software CD-ROM(020-2450-17),Getting Started with OpenChoice®book and Software Developer’s Kit CD (020-2513-00),and LabVIEW (020-2476-02),PerformanceVerification Procedure PDF file,CalibrationCertificate Documenting NIST Traceability,Z540-1Compliance,and ISO9001 Registration,Option keysticker,Power Cord.Please specify power plug and manual versionwhen ordering.Requires at least one of Option SD,HD or VGA with each new instrument ordered.Option HD –Test signal files (ATSC transport,TG700 DNL,Bitmap) on CD-ROM (020-2611-00);Sync pick-off accessory (012-1680-01),Optionkey enabling HD format support.Option SD –Test signal files on DVD (020-2610-00);Sync pick-off accessory (012-1680-01); Optionkey enabling SD format support.Option VGA –PC graphics test signal files onCD-ROM (020-2634-00),RGBHV MeasurementInterface Unit (012-1685-00),VGA to 5x BNCcable,6in.(174-5147-00),VGA to 5x BNC cable,1m (174-5126-00),Termination accessory kit,RS232 Cable (012-1692-00),BNC elbow (Qty 2)(103-0031-00),Option key enabling VGA option.VM5UP,VM5HDUP –Quick Start User Manual withTranslations (020-2643-00),VM5000 User Manual(071-1522-01),VM5000 Product software CD-ROM(020-2565-01),VM5000 Programmers manual(.pdf file).VM5UP SD,VM5UP HD,VM5HDUP SD –Testsignal files (ATSC transport,TG700 DNL,Bitmap)on CD-ROM (020-2611-00),Test signal files onDVD (020-2610-00); Option key adding newlyordered format support,Sync pick-off accessory(012-1680-01).VM5UP VGA –PC graphics test signal files onCD-ROM (020-2634-00),RGBHV MeasurementInterface Unit (012-1685-00),VGA to 5x BNCcable,6in (174-5147-00),VGA to 5x BNC cable,1m (174-5126-00),Termination accessory kit,RS232 Cable (012-1692-00),BNC elbow (Qty 2)(103-0031-00),Option key sticker addingVGA support.Recommended ProbesP5050 –500MHz,10x passive probe.Recommended AccessoriesService Manual –Order 071-1362-00.Transit Case –Order 016-1937-00.Probe Calibration,Compensation and DeskewAdapter –Order 067-0405-xx.Power Deskew Fixture –Order 067-1478-00.Video Display Clamp –Order 013-0278-xx.GPIB Cable (1m) –Order 012-0991-01.GPIB Cable (2m) –Order 012-0991-00.Instrument OptionsOpt. 18*1–Touch-screen interface.Opt. 1R –Rackmount kit.Opt. SM –Communication mask testing.Opt. CP2*2–TDSCPM2:ANSI/ITU telecom pulsecompliance testing software.Opt. ET3 –TDSET3:Ethernet compliancetest software.Opt. HD*3–HD Component analog video measure-ments and format support.Opt. J2 –TDSDDM2:Disk drive measurementssoftware.Opt. J3E –TDSJIT3E:Jitter and timing analysissoftware essentials.Opt. JA3 –TDSJIT3 v2.0:Advanced Jitter andtiming analysis software.Opt. JE3 –TDSJIT3 v2.0; Essentials Jitter andtiming analysis software.Opt. JT3 –TDSJIT3:Jitter and timinganalysis software.Opt. PW3 –TDSPWR3:Power measurementssoftware.Opt. SD*3–SD component analog video measure-ments and format support.Opt. SM –Communication mask testing.Opt. USB –TDSUSBS:USB 2.0 Compliance testsoftware only.Opt. VGA*3–RGBHV Video Measurements andVESA Compliance Tests.*1No upgrade path for this option, must be ordered at timeof initial purchase.*2Requires Option SM.*3At least one of Option SD, HD or VGA is mandatory for eachVM5000 Instrument.14Video Measurement • /video 15Automated Video Measurement SetVM5000Power Plug Options Opt. A0 –North America Power.Opt. A1 –Universal EURO Power.Opt. A2 –United Kingdom Power.Opt. A3 –Australia Power.Opt. A4 –240V,North America Power.Opt. A5 –Switzerland Power.Opt. A6 –Japan Power.Opt. A10 –China Power.Opt. A99 –No Power Cord or AC Adapter.Manual OptionsOpt. L0 –English Manual.Opt. L1 –French Manual.Opt. L3 –German Manual.Opt. L4 –Spanish Manual.Opt. L5 –Japanese Manual.Opt. L7 –Simplified Chinese Manual.Opt. L8 –Traditional Chinese Manual.Opt. L9 –Korean Manual.Opt. L10 –Russian Manual.Service OptionsOpt. C3 –Calibration Service 3 Years.Opt. C5 –Calibration Service 5 Years.Opt. D1 –Calibration Data Report.Opt. D3 –Calibration Data Report 3 Years (with Option C3).Opt. D5 –Calibration Data Report 5 Years (with Option C5).Opt. R3 –Repair Service 3 Years (including warranty).Opt. R5 –Repair Service 5 Years (including warranty).Instrument Upgrades (VM5UP)Opt. 1R –Rackmount kit.Opt. 3EA –TDSJIT3 v2.0; upgrade from J3E;requires JE3.Opt. 3EE –TDSJIT3 v2.0; essentials; upgrade from J3E; requires JE3.Opt. CP2*2–TDSCPM2 – ANSI/ITU telecom pulse compliance testing software.Opt. E3A –TDSJIT3 v2.0; upgrade from JE3;requires JT3.Opt. ET3 –TDSET3; Ethernet compliance test software.Opt. HD –HD Component analog video measure-ments and format support.Opt. IF –Upgrade installation service.Opt. J2 –TDSDDM2:Disk drive measurements software.Opt. JE3 –TDSJIT3 v2.0 Essentials; Advanced Jitter and timing analysis software.Opt. JA3 –TDSJIT3 v2.0; Advanced Jitter and timing analysis software.Opt. JTA –TDSJIT3 v2.0; Advanced Jitter and timing analysis software; requires JT3.Opt. PW3 –TDSPWR3:Power measurements software.Opt. SD –SD component analog video measure-ments and format support.Opt. SM –Communication mask testing.Opt. USB –TDSUSBS; USB 2.0 Compliance test software only.Opt. VGA –RGBHV Video Measurements and VESA Compliance Tests.*2Requires option SM.Upgrades equivalent to original options can be ordered to extend instrument performance after initial ers can install upgrades without opening the instrument case or requiring on-site service.To upgrade a VM5000,order a VM5UP with one or more of the options listed above.Factory installation is available by specifying Option IF.For older VM5000HD instrument upgrades order VM5HDUP with one or more of the following options:2A,3EE,3EA,E3A,IF,J2,JA3,JE3,JTA,PW3,SD,USB,VGA.Additional or replacement test signals and other standard accessories can be ordered separately via part number.。
Native Instruments MASCHINE MK3 用户手册说明书
The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this docu-ment is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native Instruments.“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instru-ments GmbH.ASIO, VST, HALion and Cubase are registered trademarks of Steinberg Media Technologies GmbH.All other product and company names are trademarks™ or registered® trademarks of their re-spective holders. Use of them does not imply any affiliation with or endorsement by them.Document authored by: David Gover and Nico Sidi.Software version: 2.8 (02/2019)Hardware version: MASCHINE MK3Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product.NATIVE INSTRUMENTS GmbH Schlesische Str. 29-30D-10997 Berlin Germanywww.native-instruments.de NATIVE INSTRUMENTS North America, Inc. 6725 Sunset Boulevard5th FloorLos Angeles, CA 90028USANATIVE INSTRUMENTS K.K.YO Building 3FJingumae 6-7-15, Shibuya-ku, Tokyo 150-0001Japanwww.native-instruments.co.jp NATIVE INSTRUMENTS UK Limited 18 Phipp StreetLondon EC2A 4NUUKNATIVE INSTRUMENTS FRANCE SARL 113 Rue Saint-Maur75011 ParisFrance SHENZHEN NATIVE INSTRUMENTS COMPANY Limited 5F, Shenzhen Zimao Center111 Taizi Road, Nanshan District, Shenzhen, GuangdongChina© NATIVE INSTRUMENTS GmbH, 2019. All rights reserved.Table of Contents1Welcome to MASCHINE (25)1.1MASCHINE Documentation (26)1.2Document Conventions (27)1.3New Features in MASCHINE 2.8 (29)1.4New Features in MASCHINE 2.7.10 (31)1.5New Features in MASCHINE 2.7.8 (31)1.6New Features in MASCHINE 2.7.7 (32)1.7New Features in MASCHINE 2.7.4 (33)1.8New Features in MASCHINE 2.7.3 (36)2Quick Reference (38)2.1Using Your Controller (38)2.1.1Controller Modes and Mode Pinning (38)2.1.2Controlling the Software Views from Your Controller (40)2.2MASCHINE Project Overview (43)2.2.1Sound Content (44)2.2.2Arrangement (45)2.3MASCHINE Hardware Overview (48)2.3.1MASCHINE Hardware Overview (48)2.3.1.1Control Section (50)2.3.1.2Edit Section (53)2.3.1.3Performance Section (54)2.3.1.4Group Section (56)2.3.1.5Transport Section (56)2.3.1.6Pad Section (58)2.3.1.7Rear Panel (63)2.4MASCHINE Software Overview (65)2.4.1Header (66)2.4.2Browser (68)2.4.3Arranger (70)2.4.4Control Area (73)2.4.5Pattern Editor (74)3Basic Concepts (76)3.1Important Names and Concepts (76)3.2Adjusting the MASCHINE User Interface (79)3.2.1Adjusting the Size of the Interface (79)3.2.2Switching between Ideas View and Song View (80)3.2.3Showing/Hiding the Browser (81)3.2.4Showing/Hiding the Control Lane (81)3.3Common Operations (82)3.3.1Using the 4-Directional Push Encoder (82)3.3.2Pinning a Mode on the Controller (83)3.3.3Adjusting Volume, Swing, and Tempo (84)3.3.4Undo/Redo (87)3.3.5List Overlay for Selectors (89)3.3.6Zoom and Scroll Overlays (90)3.3.7Focusing on a Group or a Sound (91)3.3.8Switching Between the Master, Group, and Sound Level (96)3.3.9Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area.973.3.9.1Extended Navigate Mode on Your Controller (102)3.3.10Navigating the Software Using the Controller (105)3.3.11Using Two or More Hardware Controllers (106)3.3.12Touch Auto-Write Option (108)3.4Native Kontrol Standard (110)3.5Stand-Alone and Plug-in Mode (111)3.5.1Differences between Stand-Alone and Plug-in Mode (112)3.5.2Switching Instances (113)3.5.3Controlling Various Instances with Different Controllers (114)3.6Host Integration (114)3.6.1Setting up Host Integration (115)3.6.1.1Setting up Ableton Live (macOS) (115)3.6.1.2Setting up Ableton Live (Windows) (116)3.6.1.3Setting up Apple Logic Pro X (116)3.6.2Integration with Ableton Live (117)3.6.3Integration with Apple Logic Pro X (119)3.7Preferences (120)3.7.1Preferences – General Page (121)3.7.2Preferences – Audio Page (126)3.7.3Preferences – MIDI Page (130)3.7.4Preferences – Default Page (133)3.7.5Preferences – Library Page (137)3.7.6Preferences – Plug-ins Page (145)3.7.7Preferences – Hardware Page (150)3.7.8Preferences – Colors Page (154)3.8Integrating MASCHINE into a MIDI Setup (156)3.8.1Connecting External MIDI Equipment (156)3.8.2Sync to External MIDI Clock (157)3.8.3Send MIDI Clock (158)3.9Syncing MASCHINE using Ableton Link (159)3.9.1Connecting to a Network (159)3.9.2Joining and Leaving a Link Session (159)3.10Using a Pedal with the MASCHINE Controller (160)3.11File Management on the MASCHINE Controller (161)4Browser (163)4.1Browser Basics (163)4.1.1The MASCHINE Library (163)4.1.2Browsing the Library vs. Browsing Your Hard Disks (164)4.2Searching and Loading Files from the Library (165)4.2.1Overview of the Library Pane (165)4.2.2Selecting or Loading a Product and Selecting a Bank from the Browser (170)4.2.2.1[MK3] Browsing by Product Category Using the Controller (174)4.2.2.2[MK3] Browsing by Product Vendor Using the Controller (174)4.2.3Selecting a Product Category, a Product, a Bank, and a Sub-Bank (175)4.2.3.1Selecting a Product Category, a Product, a Bank, and a Sub-Bank on theController (179)4.2.4Selecting a File Type (180)4.2.5Choosing Between Factory and User Content (181)4.2.6Selecting Type and Character Tags (182)4.2.7List and Tag Overlays in the Browser (186)4.2.8Performing a Text Search (188)4.2.9Loading a File from the Result List (188)4.3Additional Browsing Tools (193)4.3.1Loading the Selected Files Automatically (193)4.3.2Auditioning Instrument Presets (195)4.3.3Auditioning Samples (196)4.3.4Loading Groups with Patterns (197)4.3.5Loading Groups with Routing (198)4.3.6Displaying File Information (198)4.4Using Favorites in the Browser (199)4.5Editing the Files’ Tags and Properties (203)4.5.1Attribute Editor Basics (203)4.5.2The Bank Page (205)4.5.3The Types and Characters Pages (205)4.5.4The Properties Page (208)4.6Loading and Importing Files from Your File System (209)4.6.1Overview of the FILES Pane (209)4.6.2Using Favorites (211)4.6.3Using the Location Bar (212)4.6.4Navigating to Recent Locations (213)4.6.5Using the Result List (214)4.6.6Importing Files to the MASCHINE Library (217)4.7Locating Missing Samples (219)4.8Using Quick Browse (221)5Managing Sounds, Groups, and Your Project (225)5.1Overview of the Sounds, Groups, and Master (225)5.1.1The Sound, Group, and Master Channels (226)5.1.2Similarities and Differences in Handling Sounds and Groups (227)5.1.3Selecting Multiple Sounds or Groups (228)5.2Managing Sounds (233)5.2.1Loading Sounds (235)5.2.2Pre-listening to Sounds (236)5.2.3Renaming Sound Slots (237)5.2.4Changing the Sound’s Color (237)5.2.5Saving Sounds (239)5.2.6Copying and Pasting Sounds (241)5.2.7Moving Sounds (244)5.2.8Resetting Sound Slots (245)5.3Managing Groups (247)5.3.1Creating Groups (248)5.3.2Loading Groups (249)5.3.3Renaming Groups (251)5.3.4Changing the Group’s Color (251)5.3.5Saving Groups (253)5.3.6Copying and Pasting Groups (255)5.3.7Reordering Groups (258)5.3.8Deleting Groups (259)5.4Exporting MASCHINE Objects and Audio (260)5.4.1Saving a Group with its Samples (261)5.4.2Saving a Project with its Samples (262)5.4.3Exporting Audio (264)5.5Importing Third-Party File Formats (270)5.5.1Loading REX Files into Sound Slots (270)5.5.2Importing MPC Programs to Groups (271)6Playing on the Controller (275)6.1Adjusting the Pads (275)6.1.1The Pad View in the Software (275)6.1.2Choosing a Pad Input Mode (277)6.1.3Adjusting the Base Key (280)6.1.4Using Choke Groups (282)6.1.5Using Link Groups (284)6.2Adjusting the Key, Choke, and Link Parameters for Multiple Sounds (286)6.3Playing Tools (287)6.3.1Mute and Solo (288)6.3.2Choke All Notes (292)6.3.3Groove (293)6.3.4Level, Tempo, Tune, and Groove Shortcuts on Your Controller (295)6.3.5Tap Tempo (299)6.4Performance Features (300)6.4.1Overview of the Perform Features (300)6.4.2Selecting a Scale and Creating Chords (303)6.4.3Scale and Chord Parameters (303)6.4.4Creating Arpeggios and Repeated Notes (316)6.4.5Swing on Note Repeat / Arp Output (321)6.5Using Lock Snapshots (322)6.5.1Creating a Lock Snapshot (322)6.5.2Using Extended Lock (323)6.5.3Updating a Lock Snapshot (323)6.5.4Recalling a Lock Snapshot (324)6.5.5Morphing Between Lock Snapshots (324)6.5.6Deleting a Lock Snapshot (325)6.5.7Triggering Lock Snapshots via MIDI (326)6.6Using the Smart Strip (327)6.6.1Pitch Mode (328)6.6.2Modulation Mode (328)6.6.3Perform Mode (328)6.6.4Notes Mode (329)7Working with Plug-ins (330)7.1Plug-in Overview (330)7.1.1Plug-in Basics (330)7.1.2First Plug-in Slot of Sounds: Choosing the Sound’s Role (334)7.1.3Loading, Removing, and Replacing a Plug-in (335)7.1.3.1Browser Plug-in Slot Selection (341)7.1.4Adjusting the Plug-in Parameters (344)7.1.5Bypassing Plug-in Slots (344)7.1.6Using Side-Chain (346)7.1.7Moving Plug-ins (346)7.1.8Alternative: the Plug-in Strip (348)7.1.9Saving and Recalling Plug-in Presets (348)7.1.9.1Saving Plug-in Presets (349)7.1.9.2Recalling Plug-in Presets (350)7.1.9.3Removing a Default Plug-in Preset (351)7.2The Sampler Plug-in (352)7.2.1Page 1: Voice Settings / Engine (354)7.2.2Page 2: Pitch / Envelope (356)7.2.3Page 3: FX / Filter (359)7.2.4Page 4: Modulation (361)7.2.5Page 5: LFO (363)7.2.6Page 6: Velocity / Modwheel (365)7.3Using Native Instruments and External Plug-ins (367)7.3.1Opening/Closing Plug-in Windows (367)7.3.2Using the VST/AU Plug-in Parameters (370)7.3.3Setting Up Your Own Parameter Pages (371)7.3.4Using VST/AU Plug-in Presets (376)7.3.5Multiple-Output Plug-ins and Multitimbral Plug-ins (378)8Using the Audio Plug-in (380)8.1Loading a Loop into the Audio Plug-in (384)8.2Editing Audio in the Audio Plug-in (385)8.3Using Loop Mode (386)8.4Using Gate Mode (388)9Using the Drumsynths (390)9.1Drumsynths – General Handling (391)9.1.1Engines: Many Different Drums per Drumsynth (391)9.1.2Common Parameter Organization (391)9.1.3Shared Parameters (394)9.1.4Various Velocity Responses (394)9.1.5Pitch Range, Tuning, and MIDI Notes (394)9.2The Kicks (395)9.2.1Kick – Sub (397)9.2.2Kick – Tronic (399)9.2.3Kick – Dusty (402)9.2.4Kick – Grit (403)9.2.5Kick – Rasper (406)9.2.6Kick – Snappy (407)9.2.7Kick – Bold (409)9.2.8Kick – Maple (411)9.2.9Kick – Push (412)9.3The Snares (414)9.3.1Snare – Volt (416)9.3.2Snare – Bit (418)9.3.3Snare – Pow (420)9.3.4Snare – Sharp (421)9.3.5Snare – Airy (423)9.3.6Snare – Vintage (425)9.3.7Snare – Chrome (427)9.3.8Snare – Iron (429)9.3.9Snare – Clap (431)9.3.10Snare – Breaker (433)9.4The Hi-hats (435)9.4.1Hi-hat – Silver (436)9.4.2Hi-hat – Circuit (438)9.4.3Hi-hat – Memory (440)9.4.4Hi-hat – Hybrid (442)9.4.5Creating a Pattern with Closed and Open Hi-hats (444)9.5The Toms (445)9.5.1Tom – Tronic (447)9.5.2Tom – Fractal (449)9.5.3Tom – Floor (453)9.5.4Tom – High (455)9.6The Percussions (456)9.6.1Percussion – Fractal (458)9.6.2Percussion – Kettle (461)9.6.3Percussion – Shaker (463)9.7The Cymbals (467)9.7.1Cymbal – Crash (469)9.7.2Cymbal – Ride (471)10Using the Bass Synth (474)10.1Bass Synth – General Handling (475)10.1.1Parameter Organization (475)10.1.2Bass Synth Parameters (477)11Working with Patterns (479)11.1Pattern Basics (479)11.1.1Pattern Editor Overview (480)11.1.2Navigating the Event Area (486)11.1.3Following the Playback Position in the Pattern (488)11.1.4Jumping to Another Playback Position in the Pattern (489)11.1.5Group View and Keyboard View (491)11.1.6Adjusting the Arrange Grid and the Pattern Length (493)11.1.7Adjusting the Step Grid and the Nudge Grid (497)11.2Recording Patterns in Real Time (501)11.2.1Recording Your Patterns Live (501)11.2.2The Record Prepare Mode (504)11.2.3Using the Metronome (505)11.2.4Recording with Count-in (506)11.2.5Quantizing while Recording (508)11.3Recording Patterns with the Step Sequencer (508)11.3.1Step Mode Basics (508)11.3.2Editing Events in Step Mode (511)11.3.3Recording Modulation in Step Mode (513)11.4Editing Events (514)11.4.1Editing Events with the Mouse: an Overview (514)11.4.2Creating Events/Notes (517)11.4.3Selecting Events/Notes (518)11.4.4Editing Selected Events/Notes (526)11.4.5Deleting Events/Notes (532)11.4.6Cut, Copy, and Paste Events/Notes (535)11.4.7Quantizing Events/Notes (538)11.4.8Quantization While Playing (540)11.4.9Doubling a Pattern (541)11.4.10Adding Variation to Patterns (541)11.5Recording and Editing Modulation (546)11.5.1Which Parameters Are Modulatable? (547)11.5.2Recording Modulation (548)11.5.3Creating and Editing Modulation in the Control Lane (550)11.6Creating MIDI Tracks from Scratch in MASCHINE (555)11.7Managing Patterns (557)11.7.1The Pattern Manager and Pattern Mode (558)11.7.2Selecting Patterns and Pattern Banks (560)11.7.3Creating Patterns (563)11.7.4Deleting Patterns (565)11.7.5Creating and Deleting Pattern Banks (566)11.7.6Naming Patterns (568)11.7.7Changing the Pattern’s Color (570)11.7.8Duplicating, Copying, and Pasting Patterns (571)11.7.9Moving Patterns (574)11.7.10Adjusting Pattern Length in Fine Increments (575)11.8Importing/Exporting Audio and MIDI to/from Patterns (576)11.8.1Exporting Audio from Patterns (576)11.8.2Exporting MIDI from Patterns (577)11.8.3Importing MIDI to Patterns (580)12Audio Routing, Remote Control, and Macro Controls (589)12.1Audio Routing in MASCHINE (590)12.1.1Sending External Audio to Sounds (591)12.1.2Configuring the Main Output of Sounds and Groups (596)12.1.3Setting Up Auxiliary Outputs for Sounds and Groups (601)12.1.4Configuring the Master and Cue Outputs of MASCHINE (605)12.1.5Mono Audio Inputs (610)12.1.5.1Configuring External Inputs for Sounds in Mix View (611)12.2Using MIDI Control and Host Automation (614)12.2.1Triggering Sounds via MIDI Notes (615)12.2.2Triggering Scenes via MIDI (622)12.2.3Controlling Parameters via MIDI and Host Automation (623)12.2.4Selecting VST/AU Plug-in Presets via MIDI Program Change (631)12.2.5Sending MIDI from Sounds (632)12.3Creating Custom Sets of Parameters with the Macro Controls (636)12.3.1Macro Control Overview (637)12.3.2Assigning Macro Controls Using the Software (638)12.3.3Assigning Macro Controls Using the Controller (644)13Controlling Your Mix (646)13.1Mix View Basics (646)13.1.1Switching between Arrange View and Mix View (646)13.1.2Mix View Elements (647)13.2The Mixer (649)13.2.1Displaying Groups vs. Displaying Sounds (650)13.2.2Adjusting the Mixer Layout (652)13.2.3Selecting Channel Strips (653)13.2.4Managing Your Channels in the Mixer (654)13.2.5Adjusting Settings in the Channel Strips (656)13.2.6Using the Cue Bus (660)13.3The Plug-in Chain (662)13.4The Plug-in Strip (663)13.4.1The Plug-in Header (665)13.4.2Panels for Drumsynths and Internal Effects (667)13.4.3Panel for the Sampler (668)13.4.4Custom Panels for Native Instruments Plug-ins (671)13.4.5Undocking a Plug-in Panel (Native Instruments and External Plug-ins Only) (675)13.5Controlling Your Mix from the Controller (677)13.5.1Navigating Your Channels in Mix Mode (678)13.5.2Adjusting the Level and Pan in Mix Mode (679)13.5.3Mute and Solo in Mix Mode (680)13.5.4Plug-in Icons in Mix Mode (680)14Using Effects (681)14.1Applying Effects to a Sound, a Group or the Master (681)14.1.1Adding an Effect (681)14.1.2Other Operations on Effects (690)14.1.3Using the Side-Chain Input (692)14.2Applying Effects to External Audio (695)14.2.1Step 1: Configure MASCHINE Audio Inputs (695)14.2.2Step 2: Set up a Sound to Receive the External Input (698)14.2.3Step 3: Load an Effect to Process an Input (700)14.3Creating a Send Effect (701)14.3.1Step 1: Set Up a Sound or Group as Send Effect (702)14.3.2Step 2: Route Audio to the Send Effect (706)14.3.3 A Few Notes on Send Effects (708)14.4Creating Multi-Effects (709)15Effect Reference (712)15.1Dynamics (713)15.1.1Compressor (713)15.1.2Gate (717)15.1.3Transient Master (721)15.1.4Limiter (723)15.1.5Maximizer (727)15.2Filtering Effects (730)15.2.1EQ (730)15.2.2Filter (733)15.2.3Cabinet (737)15.3Modulation Effects (738)15.3.1Chorus (738)15.3.2Flanger (740)15.3.3FM (742)15.3.4Freq Shifter (743)15.3.5Phaser (745)15.4Spatial and Reverb Effects (747)15.4.1Ice (747)15.4.2Metaverb (749)15.4.3Reflex (750)15.4.4Reverb (Legacy) (752)15.4.5Reverb (754)15.4.5.1Reverb Room (754)15.4.5.2Reverb Hall (757)15.4.5.3Plate Reverb (760)15.5Delays (762)15.5.1Beat Delay (762)15.5.2Grain Delay (765)15.5.3Grain Stretch (767)15.5.4Resochord (769)15.6Distortion Effects (771)15.6.1Distortion (771)15.6.2Lofi (774)15.6.3Saturator (775)15.7Perform FX (779)15.7.1Filter (780)15.7.2Flanger (782)15.7.3Burst Echo (785)15.7.4Reso Echo (787)15.7.5Ring (790)15.7.6Stutter (792)15.7.7Tremolo (795)15.7.8Scratcher (798)16Working with the Arranger (801)16.1Arranger Basics (801)16.1.1Navigating Song View (804)16.1.2Following the Playback Position in Your Project (806)16.1.3Performing with Scenes and Sections using the Pads (807)16.2Using Ideas View (811)16.2.1Scene Overview (811)16.2.2Creating Scenes (813)16.2.3Assigning and Removing Patterns (813)16.2.4Selecting Scenes (817)16.2.5Deleting Scenes (818)16.2.6Creating and Deleting Scene Banks (820)16.2.7Clearing Scenes (820)16.2.8Duplicating Scenes (821)16.2.9Reordering Scenes (822)16.2.10Making Scenes Unique (824)16.2.11Appending Scenes to Arrangement (825)16.2.12Naming Scenes (826)16.2.13Changing the Color of a Scene (827)16.3Using Song View (828)16.3.1Section Management Overview (828)16.3.2Creating Sections (833)16.3.3Assigning a Scene to a Section (834)16.3.4Selecting Sections and Section Banks (835)16.3.5Reorganizing Sections (839)16.3.6Adjusting the Length of a Section (840)16.3.6.1Adjusting the Length of a Section Using the Software (841)16.3.6.2Adjusting the Length of a Section Using the Controller (843)16.3.7Clearing a Pattern in Song View (843)16.3.8Duplicating Sections (844)16.3.8.1Making Sections Unique (845)16.3.9Removing Sections (846)16.3.10Renaming Scenes (848)16.3.11Clearing Sections (849)16.3.12Creating and Deleting Section Banks (850)16.3.13Working with Patterns in Song view (850)16.3.13.1Creating a Pattern in Song View (850)16.3.13.2Selecting a Pattern in Song View (850)16.3.13.3Clearing a Pattern in Song View (851)16.3.13.4Renaming a Pattern in Song View (851)16.3.13.5Coloring a Pattern in Song View (851)16.3.13.6Removing a Pattern in Song View (852)16.3.13.7Duplicating a Pattern in Song View (852)16.3.14Enabling Auto Length (852)16.3.15Looping (853)16.3.15.1Setting the Loop Range in the Software (854)16.4Playing with Sections (855)16.4.1Jumping to another Playback Position in Your Project (855)16.5Triggering Sections or Scenes via MIDI (856)16.6The Arrange Grid (858)16.7Quick Grid (860)17Sampling and Sample Mapping (862)17.1Opening the Sample Editor (862)17.2Recording Audio (863)17.2.1Opening the Record Page (863)17.2.2Selecting the Source and the Recording Mode (865)17.2.3Arming, Starting, and Stopping the Recording (868)17.2.5Using the Footswitch for Recording Audio (871)17.2.6Checking Your Recordings (872)17.2.7Location and Name of Your Recorded Samples (876)17.3Editing a Sample (876)17.3.1Using the Edit Page (877)17.3.2Audio Editing Functions (882)17.4Slicing a Sample (890)17.4.1Opening the Slice Page (891)17.4.2Adjusting the Slicing Settings (893)17.4.3Live Slicing (898)17.4.3.1Live Slicing Using the Controller (898)17.4.3.2Delete All Slices (899)17.4.4Manually Adjusting Your Slices (899)17.4.5Applying the Slicing (906)17.5Mapping Samples to Zones (912)17.5.1Opening the Zone Page (912)17.5.2Zone Page Overview (913)17.5.3Selecting and Managing Zones in the Zone List (915)17.5.4Selecting and Editing Zones in the Map View (920)17.5.5Editing Zones in the Sample View (924)17.5.6Adjusting the Zone Settings (927)17.5.7Adding Samples to the Sample Map (934)18Appendix: Tips for Playing Live (937)18.1Preparations (937)18.1.1Focus on the Hardware (937)18.1.2Customize the Pads of the Hardware (937)18.1.3Check Your CPU Power Before Playing (937)18.1.4Name and Color Your Groups, Patterns, Sounds and Scenes (938)18.1.5Consider Using a Limiter on Your Master (938)18.1.6Hook Up Your Other Gear and Sync It with MIDI Clock (938)18.1.7Improvise (938)18.2Basic Techniques (938)18.2.1Use Mute and Solo (938)18.2.2Use Scene Mode and Tweak the Loop Range (939)18.2.3Create Variations of Your Drum Patterns in the Step Sequencer (939)18.2.4Use Note Repeat (939)18.2.5Set Up Your Own Multi-effect Groups and Automate Them (939)18.3Special Tricks (940)18.3.1Changing Pattern Length for Variation (940)18.3.2Using Loops to Cycle Through Samples (940)18.3.3Using Loops to Cycle Through Samples (940)18.3.4Load Long Audio Files and Play with the Start Point (940)19Troubleshooting (941)19.1Knowledge Base (941)19.2Technical Support (941)19.3Registration Support (942)19.4User Forum (942)20Glossary (943)Index (951)1Welcome to MASCHINEThank you for buying MASCHINE!MASCHINE is a groove production studio that implements the familiar working style of classi-cal groove boxes along with the advantages of a computer based system. MASCHINE is ideal for making music live, as well as in the studio. It’s the hands-on aspect of a dedicated instru-ment, the MASCHINE hardware controller, united with the advanced editing features of the MASCHINE software.Creating beats is often not very intuitive with a computer, but using the MASCHINE hardware controller to do it makes it easy and fun. You can tap in freely with the pads or use Note Re-peat to jam along. Alternatively, build your beats using the step sequencer just as in classic drum machines.Patterns can be intuitively combined and rearranged on the fly to form larger ideas. You can try out several different versions of a song without ever having to stop the music.Since you can integrate it into any sequencer that supports VST, AU, or AAX plug-ins, you can reap the benefits in almost any software setup, or use it as a stand-alone application. You can sample your own material, slice loops and rearrange them easily.However, MASCHINE is a lot more than an ordinary groovebox or sampler: it comes with an inspiring 7-gigabyte library, and a sophisticated, yet easy to use tag-based Browser to give you instant access to the sounds you are looking for.What’s more, MASCHINE provides lots of options for manipulating your sounds via internal ef-fects and other sound-shaping possibilities. You can also control external MIDI hardware and 3rd-party software with the MASCHINE hardware controller, while customizing the functions of the pads, knobs and buttons according to your needs utilizing the included Controller Editor application. We hope you enjoy this fantastic instrument as much as we do. Now let’s get go-ing!—The MASCHINE team at Native Instruments.MASCHINE Documentation1.1MASCHINE DocumentationNative Instruments provide many information sources regarding MASCHINE. The main docu-ments should be read in the following sequence:1.MASCHINE Getting Started: This document provides a practical approach to MASCHINE viaa set of tutorials covering easy and more advanced tasks in order to help you familiarizeyourself with MASCHINE.2.MASCHINE Manual (this document): The MASCHINE Manual provides you with a compre-hensive description of all MASCHINE software and hardware features.Additional documentation sources provide you with details on more specific topics:▪Controller Editor Manual: Besides using your MASCHINE hardware controller together withits dedicated MASCHINE software, you can also use it as a powerful and highly versatileMIDI controller to pilot any other MIDI-capable application or device. This is made possibleby the Controller Editor software, an application that allows you to precisely define all MIDIassignments for your MASCHINE controller. The Controller Editor was installed during theMASCHINE installation procedure. For more information on this, please refer to the Con-troller Editor Manual available as a PDF file via the Help menu of Controller Editor.▪Online Support Videos: You can find a number of support videos on The Official Native In-struments Support Channel under the following URL: https:///NIsupport-EN. We recommend that you follow along with these instructions while the respective ap-plication is running on your computer.Other Online Resources:If you are experiencing problems related to your Native Instruments product that the supplied documentation does not cover, there are several ways of getting help:▪Knowledge Base▪User Forum▪Technical Support▪Registration SupportYou will find more information on these subjects in the chapter Troubleshooting.1.2Document ConventionsThis section introduces you to the signage and text highlighting used in this manual. This man-ual uses particular formatting to point out special facts and to warn you of potential issues. The icons introducing these notes let you see what kind of information is to be expected:This document uses particular formatting to point out special facts and to warn you of poten-tial issues. The icons introducing the following notes let you see what kind of information can be expected:Furthermore, the following formatting is used:▪Text appearing in (drop-down) menus (such as Open…, Save as… etc.) in the software and paths to locations on your hard disk or other storage devices is printed in italics.▪Text appearing elsewhere (labels of buttons, controls, text next to checkboxes etc.) in the software is printed in blue. Whenever you see this formatting applied, you will find the same text appearing somewhere on the screen.▪Text appearing on the displays of the controller is printed in light grey. Whenever you see this formatting applied, you will find the same text on a controller display.▪Text appearing on labels of the hardware controller is printed in orange. Whenever you see this formatting applied, you will find the same text on the controller.▪Important names and concepts are printed in bold.▪References to keys on your computer’s keyboard you’ll find put in square brackets (e.g.,“Press [Shift] + [Enter]”).►Single instructions are introduced by this play button type arrow.→Results of actions are introduced by this smaller arrow.Naming ConventionThroughout the documentation we will refer to MASCHINE controller (or just controller) as the hardware controller and MASCHINE software as the software installed on your computer.The term “effect” will sometimes be abbreviated as “FX” when referring to elements in the MA-SCHINE software and hardware. These terms have the same meaning.Button Combinations and Shortcuts on Your ControllerMost instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:“Press SHIFT + PLAY”means:1.Press and hold SHIFT.2.While holding SHIFT, press PLAY and release it.3.Release SHIFT.Unlabeled Buttons on the ControllerThe buttons and knobs above and below the displays on your MASCHINE controller do not have labels.。
佳能 MVX35i MVX30i 说明书
MiniDigital Video Cassette数码摄像机使用说明书PAL中文简介基本功能高级功能编辑直接打印传输图像其他信息使用存储卡使用本摄像机之前，请先详细阅读本说明书，并妥善保存说明书作日后参考。
请阅读下列说明书• 数码视频软件• DV 网络软件Digital Video Software Version 12Instruction ManualEIf you are using Windows operating system, use the supplied DIGITAL VIDEO SOLUTION DISK For Windows If you are using Macintosh operating system, use the supplied DIGITAL VIDEO SOLUTION DISK For Macintosh PUB. DIE-203This instruction manual explains how to install the software, connect the camcorder to a computer, and download images from a memory card to a computer. For more detailed operational instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows or DIGITAL VIDEO SOLUTION DISK For Macintosh DV Network SoftwareVersion 2Instruction Manual(Installation and Preparation)This software is for use with Windows® XP only.PUB. DIE-204EThis manual covers the installation and the connection procedures only.For more operating instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows.重要使用说明警告：为了减少发生电击的危险，请勿开启外壳（或背盖）。
外企公司常用英文缩写
外企日常工作中常用的英语术语和缩写语办公室职员( Office Clerk )加入公司的整个过程为例，弓I岀在跨国公司(MNC-Multi-National Company)工作中，日常人们喜欢经常使用的术语( Terminology )和缩写语(Abbreviation )。
［找工作Job Search in g］我立志大学毕业后加入一家跨国公司。
我制作了精美的个人简历( Resume, cv)。
我参加了校园招聘( Campus Recruitment )。
我关注报纸招聘广告( Recruiting Ads)。
我也经常浏览招聘网站( Recruiting Website )。
我还参加人才招聘会( Job Fair )。
［参加面试Be in vited for In terview］我选择了几家中意的公司，投岀了简历。
终于接到了人力资源部(Huma n Resources Departme nt )邀请面试的通知。
经过几轮面试( In terview )和笔试(Writte n Test) 我终于接到了XXXX 公司的聘用书(Offer Letter )。
这是一家独资/合资企业(Wholly Foreig n-Owned Compa ny/Joi nt-Ve nture )。
［录用条件Employment Terms］我隶属XX部门(Department )。
我的职位(Position )是XXXX。
我的工作职责(Job Responsibilities )是XXXX。
我的直接上司( Direct Supervisor )是XXX。
我的起点工资(Starting Salary )是XXXX。
我的入职日期(Join-Date )是XXXX。
我的试用期(Probatio n )是3 个月。
首期劳动合同( Labor Con tract/Employme nt Con tract )的期限(Term )是3 年。
MAIA 01牙科LED口腔无影灯说明书
MAIA 01MA N UA LE D ’U S O I NSTRU CTION MAN UALMO D E D ’EM P LO I GEB RAU C HSAN LEITU N G MAN UA L DE U SO Dispositivo Medico conforme alla direttiva 93/42/CE FARO SPA Ornago (Italy)L A M PA DA D E NTA L E A LE D DENTAL LED LIGHTMAIA01MA N UA LE D ’U S O I NSTRU CTION MAN UAL MO D E D ’EM P LO I GEB RAU C HSAN LEITU N G MAN UA L DE U SO Dispositivo Medico conforme L A M PA DA D E NTA L E A LE D DENTAL LED LIGHT 01MAN UA L DE U SO Dispositivo Medico conformealla direttiva 93/42/CE FARO SPA Ornago (Italy)LED口腔无影灯使用说明书医疗器械-符合93/42/CE标准 FARO SPA Ornago (Italy)始于1948年 经验与创新strumentidentali.itL a m p a d a d e n t a l e M A I Acontain instructions that must beAIAMelatnedadapmaLthe head allow the light beam to bedevices and precautions. Faro(for children) protective Faro eyeware are individual protection devices for protecting the eyes of the patientMAIA, DO NOT uSE detergents-SODIuM HYDrOXIDEL a m p a d a d e n t a l e M A I A- The doctor shall use disposable protection devices on the handles of the lamp or guarantee its sterilisation for versions that envisage this option.- Divide materials by type (e.g. ferrous, rubber, plastic, etc.). For scrapping and disposal of materials, comply with local regulations in force, even resorting to specialised firms that are recognised and authorised.- The packaging of the lamp is suitable to adequately protect it from penetration of external agents.- The lamp in its original packaging can be transported or kept in storage for a period of 15 weeks, if compliance with environmental conditions specified below is assured:- room temperature between -20° and 70°C - relative humidity between 10% and 90% - Atmospheric pressure between 500 a 1060 mBar- The lamp must be used in the following environmental conditions: - Temperature between 10 and 40°C - relative humidity between 30 and 75%-Atmospheric pressure between 700 and 1060 mBarstrumentidentali.itL a m p a d a d e n t a l e M A I AL a m p a d a d e n t a l e M A I AELEcTrOMAGNETIc IMMUNITYManufacturer’s guidelines and statement – Electromagnetic immunityThe lamp MAIA is designed to function in the electromagnetic environment specified below. The client or user must ensure its usein the said environment.Immunity test ComplianceElectromagnetic environment - Guidelines Electrostatic discharge (ESD)IEC/EN61000-4-2± 6kV contact± 8kV airThe floor must be in wood, concrete or ceramic. If the floor is covered with synthetic material, relative humidity should be at least 30%.The quality of supply network voltage should be typical of com -mercial or hospital environments.The quality of supply network voltage should be typical of com -mercial or hospital environments.The quality of supply network voltage should be typical of com -mercial or hospital environments. If the user of the lamp MAIA requires continuous use even without a supply network, use an uninterruptible power supply.Level of magnetic field at the network frequency typical of com -mercial or hospital environments.Electrical fast transient/burst IEC/EN61000-4-4SurgeIEC/EN61000-4-5V oltage dips, short interruption and voltage variation IEC/EN61000-4-11Power frequency magnetic field IEC/EN61000-4-8± 2kV power supply± 1kV for input/output lines ± 1kV differential mode ± 2kV common mode < 5% Ut for 0,5 cycle 40% Ut for 05 cycle 70% Ut for 25 cycle <5% Ut for 5 sec.3A/mConducted immunity IEC/EN61000-4-6Conducted immunity IEC/EN61000-4-63Vrms 150kHz to 80MHz (for non life-supportingequipment)3Vrms 80MHz to 2.5GHz (for non life-supportingequipment)Portable and mobile RF communication devices should not be used near any part of the dental unit, including cables, unless they comply with recommended distances calculated with the applicable equation for transmittor frequency.Recommended distances:d = 1.2√Pd = 1.2√P from 80 Mhz to 800 MHz d = 2.3√P from 800 Mhz to 2.5 GHzP is the maximum nominal power issued by the transmittor in Watts (W) depending on the manufacturer of the transmittor, and d is the recommended distance in metres (m).The intensity of the fixed RF transmittor field, as established in an electromagnetic investigation of site a, could be less than the compliance level of each frequency interval.There can be interference near devices marked with the following symbol:Note: Ut is the power-line voltageNote 1: The highest frequency interval is applied at 80 MHz and 800Mhz.Note 2: These guidelines might not apply to all situations. Electromagnetic propagation is influenced by absorption and reflection of structures, objects and persons.a) ISN bands (industrial, scientific and medical) between 150 kHz and 80 MHz are 6.765 MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz and 40.66 MHz to 40.70 MHz.b) Compliance levels in ISN bands between 150 kHz and 80 MHz and 80 MHz to 2.5 GHz present a decreasing probability of portable transmission devices causing interference if inadvertantly taken to the patient area.Therefore, an additional 10/3 factor has been incorporated into the formula used to calculate the distance between transmittors.c) Field intensities for fixed transmittors such as base stations for radiotelephones (mobiles and cordless) and cellular mobile radios on land, CB user equipment, AM and FM transmittors and TV transmittors cannot be theoretically estimated with precision. To establish an electromagnetic environment caused by fixed RF transmittors, an electromagnetic investigation of the site should be considered. If field intensity measured at the site of use of the dental unit exceeds the aforementioned applicable compliance level, normal function of the lamp should be monitored. If any abnormal performance is noticed, additional provisions such as a different orientation or position of the lamp might be necessary.d) The field intensity in an interval of frequencies from 150 kHz to 80 MHz should be less than 3 V/m.strumentidentali.itL a m p a d a d e n t a l e M A I Afield without 1fig. 1fig. 2fig. 45fig. 3L a m p a d a d e n t a l e M A I Alamp assembly, dental chair version- Install the lamp by inserting the terminal lamp pin into the specific hole on the dental chair.L a m p a d a d e n t a l e M A I A“MAIA” LAMP WITH SWITCH On/Off/Adjustment- To switch on or off, press and release the command lever to the left or right.- Adjustment:“MAIA” LAMP WITH PROXIMITY SWITCH On/Off- To turn the lamp on and off, place your hand close to the sensor, within a maximum distance of 3 cm. When the command is given, an acoustic signal will be heard (1 beep).- For reached, On/Off/Adjustment- To turn the lamp on and off, press and release button “A”. - Adjustment:a) When the minimum light intensity is obtained, you will hear an acoustic signal (1 beep).L a m p a d a d e n t a l e M A I AvIDEO-DIAGNOSTIC fuNCTIONThe Maia lamp has a function that enables it to be used when filming with a television camera and/or using diagnostic instruments (Diagnodent and laser, for example) without causing interference that could alter the diagnostic result.This function is only in manual switch equipped versions.Activation of the Video-Diagnostic function:1. Switch on the Maia dental lamp (a beep will be heard when the control is used).2. Release the control.3. Use the control again to reach the minimum light intensity (a beep will be heard when minimum intensity is reached) then without releasing the control keep it active for at least 4 seconds.4. A beep is emitted as confirmation, the light intensity rises to the maximum level and the Video-Diagnostic function is ACTIVE.If the lamp does not react as described in point 4 above, repeat the whole procedure from point 1.Deactivation of the Video-Diagnostic function:1. Switch on the Maia dental lamp (a beep will be heard when the control is used).2. Release the control.3. Use the control again to reach the minimum light intensity (a beep will be heard when minimum intensity is reached) then without releasing the control keep it active for at least 4 seconds.4. A beep is emitted as confirmation, the light intensity rises to the maximum level and the Video-Diagnostic function is DEACTIV ATED.If the lamp does not react as described in point 4 above, repeat the whole procedure from point 1.Dimming of the light intensity with the Video-Diagnostic function ACTIV ATED:With the Video-Diagnostic function activated, the regulation of the light intensity is modified from a continuous variation to a stepwise variation.Two intermediate levels of light intensity can be chosen between the maximum and minimum.Procedure:1. Switch on the Maia dental lamp (a beep will be heard when the control is used)2. Release the control.3. Use the control again to reduce the light intensity and release the control at the intensity desired.Note:• On reaching minimum intensity, a beep will be heard.• When the dental lamp is switched on again it will return to the maximum light intensity (a beep will be heard when the control is used).strumentidentali.itL a m p a d a d e n t a l e M A I Ado not use detergents-disinfectants SODIuM HYDrOXIDE cause: risk of breakage of plastic ClEANING THE DISHES “3”STErIlIZING THE HANDlESTo remove the handle, unscrew button at 121°/134° C for a total of 200 sterilisation cycles.OTHEr PArTS Of THE lIGHTL a m p a d a d e n t a l e M A I Asurfaces with the specific product p roduct f or c leaning o r d isinfection (yearly)2: <100AcOUSTIcL a m p a d a d e n t a l e M A I A: 17÷24v ac ± 10% - 50/60 Hz 22÷35v dc: 230 v 50/60 Hz : 9v A: 2 x T250mA1 250v : Class II deviceOPTICAl fEATurES Size of light spot : 170 mm x 85mmLux: 3000*-35000* lux @700mm Colour temperature: 5000 K。
摄像头技术参数手册说明书
Camera SpecificationsImage Sensor ...................Progressive scan 1/3” CMOS, 2.0MP Maximum Resolution .......1920 x 1080Minimum Illumination .......F1.2, Color: 0.001 lux (Max Intensify) White Balance ..................ATW, Manual, PushExposure Control..............Yes Intensify.............................Selectable / OffDe-Fog ..............................YesBacklight ...........................WDR, BLCDNR ..................................3D (0-20)Video SpecificationsMain Resolution................1920x1080 @ 30fpsCompression ....................H.264 (HP/MP/BP), MJPEGBitrate Control...................VBR, CBRMultiple Streaming............5 profilesAudio SpecificationsMono Input........................64Kbps G.711 / 32Kbps G.726Mono Output.....................64Kbps G.711External T erminal SpecificationsEthernet ............................10/100 Mbps Alarm.................................1 sensor input, 1 relay outputVideo .................................Analog test output Audio.................................1 mic in, 1 line out (3.5mm) Power................................DC jackStorage .............................Micro SD slotNetwork SpecificationsProtocols ...........................IPv4, TCP, UDP, RTP, RTSP, HTTP, HTTPS,SMTP, FTP, DHCP, UPnP, DNS Network Specifications (continued)DDNS support ..................Speco DDNS (free of charge)Security er ID & Password protection, IP address filtering,digest authentication, user access logUser Access......................8 simultaneous users at D1 resolutionNumber of users may vary depending on resolution System SpecificationsPoE ...................................Standard (IEEE 802.3af) Analytics............................Motion detection (3 regions), audio detectionAlarm Triggers ..................Analytics & sensor inputAlarm Events ....................FTP video file upload, email image upload,micro SD card recording, relay outVideo Buffer ......................Configurable pre-record & post-recordImage Settings..................Privacy maskClient SpecificationsWeb Browser Support......Windows (Internet Explorer 8 and up, Chrome, Firefox) PC Application ..................SecureGuard™ PlusOperating & Unit SpecificationsPower Supply ...................PoE, 12VDC (power supply not included)Power Consumption.........8WOperating T emperature ....-4° F - 122° FOperating Humidity ..........8% - 80% RHUnit Dimensions ...............3.62” (H) x 5.11” (Dia.)Unit Weight .......................2 lbs.Certifications .....................FCC, RoHSIncluded in Package.........Unit, CD (manual, software), mounting screws,L wrench800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • Free Apps with support for view on most smart devices*Chameleon Cover™ - for best results when used outdoors, waterproofpaint is recommended.**Visit for latest ONVIFsupport. iPhone and iPad are trademarks of Apple Inc., registered in theU.S. and other countries. Android is a trademark of Google Inc. SpecoTechnologies is constantly developing and improving products. Wereserve the right to modify product design and specifications withoutnotice and without incurring any obligation.Spec Rev. 5/26/15Optional AccessoriesIPPOEINJ129512.95WPoE InjectorPSW512VDCPower SupplyINTWMWall MountINTPMPendantMountDFMTile CeilingFlush MountCVCJBDDome CameraJunction Box。
ViDESmanual
3
4
CONTENTS
License term
Copyright c 2004-2008, G. Fiori, G. Iannaccone, University of Pisa All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • All advertising materials mentioning features or use of this software must display the following acknowledgement: ” This product includes software developed by G.Fiori and G.Iannaccone at University of Pisa” • Neither the name of the University of Pisa nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY G.FIORI AND G.IANNACCONE ”AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL G.FIORI AND G.IANNACCONE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
创意视频 V1.0用户手册：NeoLIVE R2 PLUS内容说明书
NeoLIVE R2 PLUS User ManualV1.0Creative Video RevolutionContents1. Quick Start 21.1 Overview 22. Common Operation 3 2.1 Video Operation 32.2 Audio Operation 43. Menu Functions & Details 5 3.1 Input 5 3.2 Output 6 3.3 Layer 6 3.4 Transitions 83.4.3 DIP & FTB 8 3.5 Chroma Key 9 3.6 Media 9 3.7 PTZ Camera 9 3.8 System Setting 101. Quick Guide1.1 OverviewNeoLive R2 Plus is a professional live streaming switcher. It supports 4 x HDMImulti-resolution inputs and 2 x external audio inputs. The output supports 2 x HDMI PGM outputs, and transmits the real-time audio and video signals to the computer for live streaming through the TypeC interface, user can also fill in the RTMP code for network streaming directly.When using the TypeC interface, Neolive R2Plus will be recognized by the computer as a high-definition web camera, which can adaptively support MJPEG and YUY2 formats (the default format is MJPEG under USB2.0, while it is YUY2 default under USB3.0, YUY2 format supports better image quality, higher-quality performance and more efficient decoding performance, YUY2 format is better for use). It has a built-in 5.5-inch LCD display, which can realize real-time monitoring of input and output and online operation. At the same time, it has more convenient functions, such as PTZ camera control, scene preset, chroma /luma key, special transition effects, mixed audio and monitoring and recording etc. R2Plus can also deal with various live broadcasting needs which is aprofessional product in live streaming.Switch & Lock ButtonPress to power onShort press and return to the main scene Press and hold for 3s to lock and unlock Press and hold for 5s to switch offREC & PausePress the REC button to start recording for PGMPress again to stop recording and generate MP4 filesPress PAUSE to stop recording or continue recordingAuxiliary Operation AreaUnder PTZ controlIt is for logo switching when the logo button is flashing+Scale knob is for layer vertical adjustment+Scale knob is for layer horizontal adjustmentAfter pressing Scenefor Save page the scene, for Load page for sceneIt is for zoom in or outSCENEPress to activate the scene for Save page the scene, for Load page for sceneSelect the number button to save and load the scenePIPPress to enable PIPPress again to select the PIP sub-layerWhen the button is flashing, and the sub-layer can be edited and closedMEDIALoad picture Select image as signal source when editing layersLOGOPress to display the logo Press again to edit the logo Adjust the logo position by joystickSwitch the logo by buttonLUMA &CHROMA KEYSTILLPress to chroma key for the current input sourcePress STILL to freeze thePGM screen EFFECTPress STILL to freeze the current PGM screenKnobIt is for the menu operation when the menu is activatedLayer zoom adjustment in the sceneFTBPress to fade to black in PGM outputCUT & AUTOPress CUT to switch between PST & PGM Press AUTO to realize the transition effect between PST & PGMMODEFor layer operation modesT-bar mode is for PST layer operation EAZY mode is for PGM layer switchingSTREAM ButtonPress STREAM button to start the RTMP stream. The button is on when the stream is normalAudio OperationPress Audio to enter the audio setting interface The volume knob is for the PGM output volume adjustmentPress to mute and restoreThe Channel A knob is for the volume adjustment of PIPThe Channel B knob is for the volume adjustment of the background2. Common Operation2.1 Video Parta. Press the "SCENE" button, turn the knob to select the image layout and press the knob to confirm, if it is the PIP, press the PIP button to select and edit the corresponding layer under PST, there will be a green frame to mark the selected layer, press the input source 1/2/3/4 button to switch the input source for the layer, turn the knob to scale the selected image and use the joystick to change the layer position.b. Press the MODE button. When the button is red, press the input source 1/2/3/4 button to switch directly to the PGM screen. When the button is green, press the input source 1/2/3/4 button to switch directly to the PST screen.c. After that, press the MENU button to enter the scene menu, select any number to save, and the number is white when it is done. When you need to load the saved scene, enter the scene menu and select the corresponding number to load the scene.d. Press the "EFFECT" button and rotate the button to select the transi tion effect for the current layer.Headphone jackSupports audio channel monitoringUsed to load pictures and logos from a USB flash drive & firmware update & records from a USB driveSupport Web browser control, networkExternal Tally device for USB2.0e. Press the "AUTO" button, and the content will switch to the PGM output. You can also use CUT button to switch directly.2.2 Volume Adjusta. Press the MENU button and select the audio part, you can adjust all the audio, or you can press the AUDIO button to enter.b. Knob 1 is the Volume knob, which is used to adjust the volume of the main output. Press to mute and restore.c. Knob 2 is the Channel A knob, which controls the volume adjustment of the PIP layer.d. Knob 3 is the Channel B, which controls the volume of the background layer.e. All the audio channels are available for adjust on Audio menu. PGM total output volume, four input source volume IN1/IN2/IN3/IN4, two external audio inputs MIC1/MIC2 and audio monitoring.f. HP can be selective monitoring.g. Use the knob to select and adjust the desired audio and volume level, and toggle the 5-way button up and down to set different parameters.h. When the audio mode is AFV, the audio will switch with the layer switch. When ON, the main outputs output this audio at the same time.When OFF, the sound is turned off and that audio sound does not appear.PGMON85IN 1AFVDigital65 1.01IN 2AFVDigital 65 1.01IN 3AFVDigital 65 1.01IN 4AFVDigital 65 1.01MIC 1ONLine in 65 1.01MIC 2OFFMic in 65 1.01HP65PGM3. Menu Functions and Details3.1 Inputa. Input setting mainly includes input detection of 4 HDMI signal sources and picture setting. The input resolution of the current input source will be detected and displayed when there is HDMI input source access.b. When there is no HDMI input source, it can be manually set as TP test pattern.3.2 OutputThe output contains output format and colorspace , which can be selected according to the needs of the corresponding output, including1080P60/1080P50/1080P30/1080P25/1080P24/1080i60/1080i50 output format, the color mode is RGB Full mode by default, and add RGB Limit and YUV two modes can be selected.3.3 Layera. Switch mode is optional under the Layer menu, T-Bar Mode and FastSwitching Mode. In T-Bar switching mode, switching the source will take effect on the PST first. The PGM transition switching will only be completed when the T-bar or Auto key is used.In fast switching mode, switching the signal source will directly switch the screen on the PGM.b. The corresponding layer can be selected under the Layer menu for signalsource switching.BG is the bottom layer, PIP is the top layer. Select the corresponding layer thenDigital ZoomPOS 59,86H SIize H_Content H StartV Siize V_Content V StartScale POS 44,660%50%192019200108010800Easy Mode T-Bar Mode Digital ZoomPOS 59,86H SIize H_Content H StartV Siize V_Content V StartScalePOS 44,660%50%192019200108010800PST BG PGM BGPST PIP PGM PIPT-Bar Mode PST BG HDMI 2you can change the screen by switching the signal source.Position and Zoom can adjust the size and position of the corresponding layer, and the five-way key can select the X-axis and Y-axis.3.4 Transitiona. Transition settings mainly include the switching of transition effects and the setting of special effects, which can also be accessed by EFFECT button.b. In transition setting, you can use the knob to select the transition effects, press the knob to confirm the effect.c. DIP and FTBDIP transition and FTB are allowed to set as the specific colors or pictures. The colors can be adjusted by the knobs and the five-way keys.DIP color and FTB color can be adjusted separately.3.5 Chroma KeyEnter the chroma keying menu, select the HDMI signal of the PIP layer to be keyed and turn on the chroma key switch, you can key in the chroma key; sup-port manual color picking through the knob and five-way key. Add the bottom layer as needed.3.6 Mediaa. In Media menu, You can switch the LOGO and picture file.b. (1) when the LOGO key is always on, the LOGO will display on PGM directly.c. (2) when the LOGO key blinks , You can adjust logo position by the five-di-FTBColorImageHSV:180,29,41RGB:3641,41DIPColor ImageHSV:180,29,41RGB:3641,41HS VHSVSmoothOFFChromakeyLumakeyHSV:180,29,41RGB:3641,41HDMI 1HDMI 3HDMI 4HDMI 2MediaHS VKeySimilarityrection key, use the arrows keys to switch LOGO and press the knob to con-firm.d. In Image menu you can choose the picture mode and to edit the required picture.3.7 PTZa. R2Plus support up to four PTZ cameras control. Connect R2Plus and PTZ camera by HDMI cable then use router or switch to set R2Plus and PTZ to the same network segment.b. The ip of PTZ can be modified by the combination of five-way key and knob; the first three digits of the ip of PTZ should be consistent with the first three digits of the ip of R2Plus. (Note: 192.168.5.163)3.8 System Settingsa. System setup mainly includes network setup, time setup, device parameter setup, system information and system reset.b. Enter the network settings to view the MAC address, choose to turn on or off the dynamic host configuration protocol, set the IP address, subnet mask and default gateway, and apply the settings after completion.Set the IP address, subnet mask and default gateway, and then apply the settings after completion.c. Ip address can be obtained by external cable, open DHCP one-key, or manually through the five-way key and knob.Both methods need to be applied before they can be saved and take effect.Room 1010, the 2rd Building, Torch Xinke Plaza, Weili 2 Road, Huli district, Xiamen, China ******************+86 592 5565698XIAMEN SPROLINK SCIENCE & TECHNOLOGY CO., LTD。
视频解码器用户手册说明书
Video DecoderUser Manual Manual Version:V1.00Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.CopyrightCopyright 2016 Zhejiang Uniview Technologies Co., Ltd. All rights reserved. No part of this manual may be copied, reproduced, translated, or distributed in any form or by any means without prior consent in writing from our company.Trademark Acknowledgementand other Uniview's trademarks and logos are the property ofZhejiang Uniview Technologies Co., Ltd. Other trademarks, company names and product names contained in this manual are the property of their respective owners.DisclaimerCAUTION!The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters).●To the maximum extent permitted by applicable law, the productdescribed, with its hardware, software, firmware and documents, isprovided on an "as is" basis.●Best effort has been made to verify the integrity and correctness ofthe contents in this manual, but no statement, information, orrecommendation in this manual shall constitute formal guaranteeof any kind, expressed or implied. We shall not be held responsiblecontents of this manual are subject to change without prior notice.Update will be added to the new version of this manual.●Use of this manual and the product and the subsequent result shallbe entirely on the user's own responsibility. In no event shall we beliable for any special, consequential, incidental, or indirectdamages, including, among others, damages for loss of businessprofits, business interruption, or loss of data or documentation, orproduct malfunction or information leakage caused by cyber attack,hacking or virus in connection with the use of this product.●Video and audio surveillance can be regulated by laws that varyfrom country to country. Check the law in your local region beforeusing this product for surveillance purposes. We shall not be heldresponsible for any consequences resulting from illegal operationsof the device.●The illustrations in this manual are for reference only and may varydepending on the version or model. The screenshots in this manualmay have been customized to meet specific requirements and userpreferences. As a result, some of the examples and functionsfeatured may differ from those displayed on your monitor.●This manual is a guide for multiple product models and so it is notintended for any specific product.●Due to uncertainties such as physical environment, discrepancymay exist between the actual values and reference values providedin this manual. The ultimate right to interpretation resides in ourcompany.Environmental ProtectionThis product has been designed to comply with the requirements onenvironmental protection. For the proper storage, use and disposal ofthis product, national laws and regulations must be observed.Safety and Compliance InformationSafety SymbolsThe symbols in the following table may be found on installation-related equipment. Be aware of the situations indicated and take necessary safety precautions during equipment installation and maintenance.The symbols in the following table may be found in this manual.Carefully follow the instructions indicated by the symbols to avoid hazardous situations and use the product properly.Symbol DescriptionWARNING!Indicates a hazardous situation which, if not avoided, could result in bodily injury or death.CAUTION!Indicates a situation which, if not avoided, could result in damage, data loss or malfunction to product.NOTE!Indicates useful or supplemental information about the use of product.Safety InformationRead through the instructions carefully before starting installation and operation.Installation and maintenance must be performed by qualified●This device is a class A product and may cause radio interference.Take measures if necessary.●While shipping, the device should be packed in its original packing.●Disconnect power before installation and cable connection. Powerdown the device before connecting and disconnecting cables, accessories and peripherals.●Verify installation and cable connection are correct before use.Incorrect installation and connection may cause personal injury and device damage.●Protect the power cable from being stepped on or pressed,particularly at the plug, receptacle, and the part leading out of the device.●Follow the procedure to shut down the device properly. Use anUninterrupted Power Supply (UPS) if possible. Sudden power failures can cause disk damage or device malfunction.●Improper use or replacement of the battery may cause risk ofexplosion. Use the manufacturer recommended battery. Dispose of the used battery according to local regulations or the battery manufacturer's instructions. Never dispose of the battery in fire.●Ensure a proper operating environment, including temperature,humidity, ventilation, power supply, and lightning protection. Make sure the device is always properly grounded. Keep the device from dust, excessive vibration and strong electromagnetic radiation.●Do not use the device near water or expose to rain or moisture.Never spill liquid of any kind on the device. Never let liquid of any kind enter the device.●Never stare at the optical module or optical fiber connector duringoperation.●Take necessary measures to ensure data security and protect thedevice from network attack and hacking (when connected toInternet). Possible risks and consequences are at user's solediscretion.● Contact your dealer if the device does not work properly. Neverattempt to disassemble the device yourself. User shall assume allresponsibility for damage, loss, or injury caused by unauthorizedrepair or maintenance.WARNING!● Never look at the transmit laser while the power is on. Never look directly at the fiber ports and the fiber cable ends when they are powered on.●Use of controls or adjustments to the performance or procedures other than those specified herein may result in hazardous laser emissions.Regulatory ComplianceFCC Part 15This equipment has been tested and found to comply with the limits for digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.This product complies with Part 15 of the FCC Rules. Operation is subject1.This device may not cause harmful interference.2.This device must accept any interference received, includinginterference that may cause undesired operation.LVD/EMC DirectiveThis product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.WEEE Directive–2002/96/ECThe product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.Contents1 Introduction (1)2 Login (1)3 Common Functions (2)4 Network (3)TCP/IP (3)Telnet (4)SNMP (5)5 Audio and Video (7)Audio (7)Video (8)Media Stream (8)6 Service (9)Image (9)Transparent Channel (11)7 System (12)User (12)Time (12)Management Platform (13)Serial Port (14)8 Maintenance (16)Maintenance (17)Device Status (17)Decoding Status (18)1 IntroductionThis manual describes how to manage the device on a Web browser.The figures in this manual are only for illustration purpose. Theparameters, options and values actually displayed on the Web pages ofyour device may be different from those in this manual.2 LoginBefore you start, check that:The device is operating properly.The computer is connected to the device.The computer is installed with Microsoft Internet Explorer (IE) 7.0 or higher, and no proxy server is being used.NOTE!●The default IP address of your device is 192.168.0.14; the defaultsubnet mask is 255.255.255.0; the default gateway is 192.168.0.1.●Use admin as the username and password for first-time login. Pleasechange the default password under System to ensure accountsecurity.Follow the steps to log in to the device:1.Enter the device's IP address in the address bar and then pressEnter.2.Log in with the correct username and password. The Commonpage is displayed to list the frequently used functions. For details,see Common Functions.3 Common FunctionsThe Common page lists functions that are frequently used to manage the device. The table below describes the meaning of the icons on this page.firmware version, network settings, and management mode.For more details, seethe screen, image resolution and refresh rate, and remainingdecoding capacity of the device. For more details, seeDecoding StatusSet network parameters such as IP address for the device.For more details, seeSet parameters required if the device is to be managed by amanagement platform (central server). For more details, seeManagement PlatformSet vidoe output parameters, including the number ofwindows that appear on the screen, image resolution andrefresh rate. For details, seeSet maintenance parameters. For details, see4 NetworkSet network settings include TCP/IP and Telnet so that the device can communicate with other devices on the network.TCP/IPAssign a static IP address manually, or obtain one using the DHCP server.1.Click Network > TCP/IP.2.Set the parameters. Some are described in the table below.3.Click Save.TelnetEnable Telnet if you want to access the device from a computer with Telnet. The username and password for Telnet are the one you use to access the device on a Web browser. If the password for Web access is changed, the Telnet password changes too. By default the admin username cannot be changed.1.Click Network > Telnet.2.Select the check box to enable Telnet, and then click Save. SNMPEnable Simple Network Management Protocol (SNMPv3) if the device operates in server mode (managed via a central server). Through SNMP the central server synchronizes audio/video channel configurations and some of the scheduled tasks to the device, and the device reports device alarms to the central server.1.Click Network > SNMP.2.Set the parameters. Some are described in the table below.5 Audio and VideoSet video, audio and media stream parameters. The major functionsprovided on the Video&Audio menu are listed in the table below.NOTE!●In standalone mode, all parameters under Video & Audio can beconfigured on the client computer.●In server mode, only Display Mode can be configured on the clientcomputer; other parameters can only be configured on the centralserver.AudioSelect the output channel and adjust the sound volume as needed.1.Click Audio & Video > Audio.2.Set the parameters and then click Save.VideoSelect the output channel and then set the number of windows on the screen, image resolution and refresh rate.1.Click Audio & Video > Video.2.Set the parameters and then click Save.Media StreamSet media stream parameters, including the stream source address and address format, so that the device can receive media streams from the connected cameras.1.Click Audio & Video > Media Stream.2.Set the parameters. Some are described in the table below.6 ServiceSet image parameters and a transparent channel as needed. The major functions provided on the Service menu are listed in the table below.ImageSet the image display ratio, width and color of the divider line on the screen, and crop images as needed.1.Click Service > Image.2.Set the parameters. Some are described in the table below.Transparent ChannelSet the transparent channel to transfer video and audio signals through a serial port.1.Click Service > Transparent Channel.2.Set the parameters. Some are described in the table below.7 SystemSet system parameters, including the user password, system time, system language, management platform, and serial port.UserChange the default password to a strong one (at least 8 digits) after your first login. It is also recommended that you change the password periodically to ensure account security.1.Click System > User.2.Enter the old and new passwords.3.Click Save.TimeSet system time for your device and how the time is updated.1.Click System > Time.2.Set the parameters. Some are described in the table below.NOTE!The device synchronizes time with the central server when operating in server mode.Management PlatformConfigure the management platform only when the device operates inserver mode (managed by a central server).1.Click System > Platform.2.Select Connect to Platform.3.Set the parameters. Some are described in the table below.4.Click Save.Serial PortSet the serial port on the device, including the port type, baud rate, parity check, and flow control method.1.Click System > Serial Port.2.Select the desired port and then set parameters accordingly. Theparameters displayed vary with the serial port selected. Thefigure below shows the parameters displayed when COM 1isselected.The figure below shows the parameters displayed when COM 2is selected.3.Some parameters are described in the table below.NOTE!In server mode, only Duplex can be configured on the Web browser, and all the other parameters can be configured only on the central server. 8 MaintenanceThe major functions provided on the Maintenance menu are listed inthe table below.MaintenanceClick Maintenance> Maintenance and then perform maintenance operations as needed. You can restart the device, restore some factory default settings, import and export configuration files, export logs, and upgrade the device.Device StatusClick Maintenance> Device Status to view basic information of the device, its network settings and operation status. The following shows an example.Decoding StatusClick Maintenance> Decoding Status to view decoding status, including the output channel, number of windows on the screen, image resolution and refresh rate, remaining decoding capacity, and stream source address. The following shows an example.。
视频耳镜用户手册说明书
VIDEO OTOSCOPE USER MANUALi Contents1 I NTRODUCTIONWelcome Page 3 Warranty Information Page 4 Cautions Page 5 Warnings Page 6Speci cations Page 7BioCam2.0 Parts Page 82 GETTING STARTEDHow to Install the BioCam2.0 Software Page 9How to Remove the BioCam2.0 Software Page 15 Connecting and Using the Device Page 16Using the Freeze Button and the Focus Dial Page 173USING THE BIOCAM2.0TMCapturing Images Page 18 Recording Video Page Page 1 |VIDEO OTOSCOPE USER MANUALThis guide explains the device, how to install the BioCam software and how touse the BioCam2.0TM.The Biocam 2.0TM is a digital otoscope with a USB video cable. Included with theBioCam2.0TM are three interchangeable speculums as well as a USB video cable designed for easy plug and play operation.The BioCam2.0TM is compatible with any type of video display devices with USB2.0 ports and Windows OS platform. The operation of this device is supportedby the BioCam2.0TM Video Otoscope System software.System RequirementsRuns on Windows XP or later operating systemUSB 2.0 portViewing monitorIntended UseThe BioCam2.0TM is capable of being used for multiple diagnosis such as skin lesions, dental tartar, ear infection and more.User Pro lePage 3 | Can be operated by any trained professional.Warranty InformationVIDEO OTOSCOPE USER MANUAL Please register your BioCam2.0TM at within amonth from the date of purchase to be eligible for our limited parts and laborwarrantyworkmanship under normal use and service for the period of one year from the purchase date from Goldline.Goldline will repair or replace any defected BioCam2.0TM device under theterms of this warranty.Goldline will not be responsible for loss associated with the use of anyBioCam2.0TM that :(1) Has had serial number defaced(2) Has been repaired by anyone other than Goldline(3) Has been altered, or(4) Has been used in a manner other than in accordance with this manual.Please register your BioCam2.0TM online at within30 days from the date of purchase to be eligible for our limited warranty. Those registering after 30 days from the date of purchase will not be entitled to any warranty protection.Page 4 |VIDEO OTOSCOPE USER MANUAL1IntroductionCautions1. In order to obtain optimum performance and ensure patient safety, please read this instruction manual thoroughly.2. Do not use Biocam2.0TM if you notice any signs of damage or malfunction and contact a Goldline customer service representative immediately.3. Other than speculum attachments, do not disinfect Biocam2.0TM by using oxide gas, steam or any liquid disinfectant.4. This product complies with current required standards for electromagnetic interference and should not present any complications to other equipment or devices. Avoid using this device in close proximity of other equipment.5. Do not connect BioCam2.0TM before you complete the BioCam2.0TM Video Otoscope System software installation on your system.6. Check for USB 2.0 compatibility prior to installation and usage.7. Usage of multiple USB ports may cause con ict in your system.8. Keep out of reach of children. Only to be used by trained personnel.9. Please turn o all running programs before installing the BioCam2.0TM software.Page 5 |VIDEO OTOSCOPE USER MANUAL2. Do not use any other attachments other than the attachments designed by Goldline exclusively for the BioCam2.0TM.3. Use caution when inserting speculum into the ear canal.Page 6 |VIDEO OTOSCOPE USER MANUALPage 7 | VIDEO OTOSCOPE USER MANUALSensor Pixel Size3.6 μm x 3.6 μmQuad VGA XGA SVGA VGA CIF QVGA 1280H x 960V, 15fps, USB 2.0 only [interpolation]1024H x 768V, 15fps, USB 2.0 only [interpolation]800H x 600V, 15fps, USB 2.0 only [interpolation]640H x 480V, 30 fps 352H x 288V, 30fps 320H x 240V, 30fpsR E S O L U T I O NC A M E R ALightingSupply Voltage 6EA White LED 5.0V, USBIntroductionBioCam2.0TM PartsPage 8 |VIDEO OTOSCOPE USER MANUALThe BioCam2.0TM is simple and ergonomically designed to optimize functional-ity and make video capture simpler and more accurate. It is lightweight and easy to operate. This device only accepts BioCam2.0TM speculums from Goldline.Focus DialPower SwitchUSB 2.0Freeze buttonFocus DialTo focus the image or video.Power Switch Turn on/ o the video otoscope.Grip HandleFor comfort and stable handling ofthe video otoscope.Speculum Nozzle Only accepts BioCam2.0TM speculums.Freeze Button For video record and image capture.USB 2.0Compatible with any USB 2.0 ports.Page 9 |VIDEO OTOSCOPE USER MANUALPage 10 | VIDEO OTOSCOPE USER MANUAL5. ClickNextPage 11 |VIDEO OTOSCOPE USER MANUALPage 12 | VIDEO OTOSCOPE USER MANUAL9. ClickFinish11. Plug in the BioCam2.0TM after restarting. The window below will appear.Click Next after choosing Install the software automatically (Recommended).Page 13 | VIDEO OTOSCOPE USER MANUAL*Do not plug in the BioCam2.0 before you nish installing the software and restart your computer.Page 14 | VIDEO OTOSCOPE USER MANUAL13. Click Finish. Installation is completed.Page 15 |VIDEO OTOSCOPE USER MANUALPage 16 | VIDEO OTOSCOPE USER MANUALAttaching SpeculumsThe BioCam2.0TM is compatible with all Goldline speculum range. Select the right speculum or accessory, Screw on to the BioCam2.0TM and start using.The Freeze ButtonPress and hold the Freeze button for approximately 1 second and the image freezes as a thumbnail on screen.Page 17 | VIDEO OTOSCOPE USER MANUALPage 18 | VIDEO OTOSCOPE USER MANUALprogram..3. Press the Freeze button on the BioCam2.0TM to capture an image.Image will appear on the AMCap-BioCam2.0 window. The image will also automatically appear and be saved on the Capture folder and be viewed and retrieved at anytime.SAVING YOUR IMAGES ON YOUR SELECTED DESTINATION FOLDER4. You can also save your image to your selected destination folder by clicking on the Image Capture drop down menu to save the image. Select Save As .5. Choose destination folder and click Save to save image. Image can now be viewedanytime in the destination folder.VIDEO OTOSCOPE USER MANUALPage 2|VIDEO OTOSCOPE USER MANUAL.Start video capturePage 21 |VIDEO OTOSCOPE USER MANUALafter this.Page 2|VIDEO OTOSCOPE USER MANUALPage 2|VIDEO OTOSCOPE USER MANUALPage 2| VIDEO OTOSCOPE USER MANUAL2. Adjust video accordinglyThank You for Choosing BioCam2.0TMTM . We hope that BioCam2.0 TM made diagnosing easier and increased client’s compliance.If you have any inquiries or questions regarding the BioCam2.0TM, please go toour web site at: or contact one of our personnel at***********************or simply call us at:180****3880Page 2|VIDEO OTOSCOPE USER MANUAL。
摄录机常用术语ABC
摄录机常用术语为选购一款满意的摄录机，首先应了解有关摄录机本身专用的术语以及描述其功能特色和其他数字视频方面的名词、动词、形容词等确切的含义，下面按英文字母顺序列举一些常用的摄录机术语的基本含义供选机时参考。
1、图像自动增益控制（AGC）——是在记录图像之前将视频信号放大的技术措施，它对拍摄对象的光照程度进行检测，若光线不足，就增加摄像机的灵敏度和功率，使视频信号能产生更加清晰的图像。
放大虽然也会使视频杂讯增强，以致使图像出现颗料感或模糊不清，但总比图像完全看不见要好得多。
这种自动增益控制也用于音频，当摄录对象离机内话筒较远声音变低时，音频信号就自动放大到听得清的程度。
自动音频增益控制的缺点是同时放大了噪声，也会使摄录机本身的马达声放大，因此有些摄录机设有手动音频电平控制电路，可以临时撤除AGC，使不需要声音的环境下保持画面的静谧，只有在确定需要时才对声音信号放大，这种手动控制大多在专业级或高端摄像机中才具备。
2、配音（Audio Dub）——是指将原始视频素材中的部分声轨或全部声轨用情景解说或音乐来取代的过程，这种代替过程对原视频图像没有影响。
3、自动曝光程序模式（Auto Exposure Program Mode）——几乎所有的摄录机都配有AE （自动曝光）程序模式，它可对各种拍摄要求进行自动设置。
例如有些摄录机上的“运动”、“肖像”以及“暮色”等模式都是AE程序模式的实例。
在选定一种程序模式后，摄录机的全部可调参数，如快门速度、光圈大小以及白平衡等都针对该种特定的拍摄环境进行自动设定，无须摄制人员进行主观干预，因此这种方法既精确又快捷，非常方便省事。
4、自动对焦（Autofocus）——这是摄录机一种不言自明的重要功能，了解它的技术特点有利于摄录出最佳的视频图像。
自动对焦一般采用红外光束来定位被摄对象与镜头之间的距离，摄录机发射一串红外光束至被摄对象，再以对象反射回来的红外光束所需的时间来估算出上述距离。
电脑英语单词表
a)电脑英语单词表2.domain name server 域名服务器3.protocol 草案,条款,议定书ˈprəʊtəˌkɔ:l4.QoS 服务质量puter 计算机, 电脑kəmˈpju:tə6.connect 连接, 联结,通电话kəˈnekt7.HD 硬盘8.Video 电视的; 视频的; 影像ˈvidiəu9.Method 方法, 办法ˈmeθəd10.Digital 数字, 数码ˈdidʒitəl11.STB Set-Top-Box 机顶盒12.Cancel 取消, 废除注销, ˈkænsəl13.Sure 无疑的, 确信的ʃuə14.exit 出口, 退出ˈeksit15.saving 节约, 储蓄，保存ˈseiviŋ16.open 打开; 开放的,设ˈəupən17.copyright 版权ˈkɔpirait18.corporation 公司ˌkɔ:pəˈreiʃən19.CPU 中央处理器20.Center 中央,中心点, ˈsentə21.Processor 加工、处理，中央处理器ˈprɔsˌesə, ˈprəʊˌses-22.Unit (工作)单位，(计量)单位ˈju:nit23.Mainboard 主机板,主板24.random access memory 随机存取存储器ˈrændəmˈækses25.ROM 只读存储器rɔm,rəum26.Floppy 松软的;松弛下垂的ˈflɔpi:27.Disk 圆盘唱片; 磁盘, 光盘disk28.Monitor 监视器, 监听器; ˈmɔnitə29.Keyboard (打字机, 钢琴等的)键盘ˈki:bɔ:d30.Mouse 鼠标，羞怯[胆小]的人maus31.Chip 碎片，集成电路片tʃip32.CD-R 可记录光盘驱动器33.PC Personal Computer 个人计算机,个人电脑34.personal computer 个人电脑35.central processing 中央处理36.fan 扇子; 风扇;37.fæn38.motherboard 底板,母板ˈmʌðəbɔ:d39.RAM Royal Academy of Music随机存储器，<英>皇家音乐学院40.Random 任意的;随机的ˈrændəm41.access memory 访问存储器42.hard disk 硬盘43.loopy 多圈的,一圈的ˈlu:pi44.disk drive 磁盘驱动器45.CD-ROM 只读存储器, 只读光盘ˌsi:di:ˈrɔmpact disk 激光唱片，压缩磁盘，光盘ˈkɔmˌpækt47.read only memory 只读存贮器48.DVD 数字化视频光盘ˌdi:vi:ˈdi:49.Versatile 有多种学问、多功能的ˈvə:sətail50.CD-RW 可重写光碟51.Rewrite 改写ri:ˈraɪt52.VGA 视频图形阵列53.display card 显示卡54.sound 声音; 响声，录音saund55.card 卡片, 名片;N 网络,局域网,本地网lænwork card 网卡58.Modem MOdulator,DEModulator调制解调器59.Webcam 网络摄影，画面可以通过互联网同步播出ˈwebˌkæm60.Case 计算机辅助软件工程61.Power 权力, 功率动力,电源ˈpauə62.CRT 阴极射线管63.UPS 无间断供电64.Printer 印刷，打印机ˈprɪntə65.Speaker 演讲者，扬声器, 喇叭ˈspi:kə66.LCD 液晶显示器Liquid Crystal Display 液晶显示屏B Intel公司开发的通用串行总线架构universal serial bus通用串行总线68.IEEE1694 美>电器和电子工程师学会69.IDE 集成电路设备,智能磁盘设备aid70.integrated device electronics 集成电路设备71.SCSI 小型计算机系统接口ˈskʌzi:72.EGA 增强型图形适配器73.MHZ 兆赫(兹)74.AGP 一种设计用来更快，更平稳地传送3D图形的接口。
DWC-V7753WTIR 分辨率高的外部摄像头说明书
Before installing and using the camera, please read this manual carefully.Do not open or modify.Do not open the case except during maintenence and installation,for it may be dangerous and can cause damages.Do not put objects into the unit.Keep metal objects and flammable substances from entering the camera.It can cause fire, short-circuits, or other damages.Be careful when handling the unit.To prevent damages, do not drop the camera or subject it to shock or vibration.Do not install near electric or magnetic fields.Protect from humidity and dust.Protect from high temperature.Be careful when installing near the ceiling of a kitchen or a boiler room,as the temperature may rise to high levels.Cleaning:To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.Mounting Surface:The material of the mounting surface must be strong enough to support the camera.pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference, when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. WARNING: Changes or modifications are not expressly approved by the manufacturer.23IntroductionInstallationModule OSD MenuTroubleshooting Warranty Information Specifications FeaturesParts and Descriptions DimensionsInside the BoxInstallation InstructionsConnecting to Monitors 10Installation using Mount Bolt & Nut Control Board456789111213-252627-2829-30Adjusting the Camera AngleF EATURES*Analog High Definition (AHD) HD over Coax TechnologySTAR-LIGHT™ Super Low Light TechnologyPanasonic 1/3" CMOS Sensor1080P Resolution at 30fpsWide Dynamic Range (WDR)Fixed P-Iris Lens 3.6mmSmart IR™ with Intelligent Camera Sync. 50ft RangeSmart DNR™ 3D Digital Noise ReductionHighlight Masking Exposure (HME)True Day/Night Mechanical IR Cut FilterSecondary Video-BNC Output (While UTP in use)Easy Icon Driven OSD Menu with Built-in JoystickProgrammable Privacy ZonesAuto Gain Control (AGC)Back Light Compensation (BLC)Dynamic Range Compressor (DRC) Reveals Low Light Detail Auto White Balance (AWB)IP67 Certified (Weather Resistant)4Set Screw5PD IMENSIONS IN MILLIMETERS (IN)*105.07.65.23 67I NSIDE THE BOX*Included with Bullet Camera:12345User ManualMounting Template2 Machine Screws and 2 Dry Wall AnchorsMounting Bolt & Nut L-WrenchI NSTALLATION INSTRUCTIONS*1. Detach the camera’s cover dome from the camera’s module by unscrewing the three cover dome screws using the L-Wrench.2. Use the camera or mounting template to mark and drill the necessary holes in the wall or ceiling.3. Pull wires through and make connections.4. Using three (3) included screws, mount and secure the camera to the wall or ceiling.5. Secure the camera’s cover dome onto the camera base and remove the protecting film to complete the installation.89INSTALLATION USING MOUNT BOLT & NUT*1. Detach the camera’s cover dome from the camera’s module by unscrewing the three cover dome screws.2. Using the camera or mounting template, mark and drill the necessary holes in the wall or ceiling.3. Secure the two long mounting screws to the camera’s base.4. Pull wires through and make connections.5. Mount the camera to the mounting surface using the 2 mounting nuts.6. Secure the camera’s cover dome onto the camera base to complete the installation.C ONNECTING TO MONITORS*Use the diagram below to connect to a Monitor or CRT Monitor properly.MonitorPower Connection - 12VDC Voltage.All cameras are equipped with a second video output for on-site configuration.10C ONTROL BOARD*Remove the camera’s dome cover to access the camera module and OSD joystick. Use the Joystick to control the camera’s OSD options.12A1Rotation 360º2Panning 360º3Tilting 70º IR LEDM ODULE OSD MENU*EXPOSURELENSMANUAL/Manual mode supports the fixed board lens or the manual iris lens.AUTO AUTO mode sets the camera’s iris automatically.- Level: Change the camera’s iris value manually. If AUTO is selected, this option is disabled.- Brightness: Adjust the camera’s brightness from 0~20. The higher the number, the brighter the image will appear.- Shutter: Set the shutter speed to AUTO, Manual, or FLC (Flicker-less mode).- If AUTO is selected, select from the following options:- NORMAL: Set when the camera is installed in an indoor environment.- DEBLUR: Set when the camera is installed in an outdoor envirnment.- Select FLC if the camera is experiencing some flickering in the image.The shutter speed will be set to 1/100 for NTSC, or 1/120 for PAL.- If Manual is selected, set the shutter speed from the options: 1/30,1/60, 1/120 ~ 1/30000.- Focus Adjustment: When on, the default level is set automatically bycontrolling lens focus and based on the installation and environmentcircumstances.EXPOSUREBACKLIGHTOFFHME HIGHLIGHT MASKING EXPOSUREHME allows objects to appear clearly on the screen bymasking extremely bright areas. To setup HME, set thelevel and color. The lower the setting, the darker themasking areas have to be. Select from: 0 ~ 10.Color: Set the color of the HME mask. Select from:BLACK / WHITE / YELLOW / CYAN / GREEN /MAGENTA / RED / BLUEBLC BACK LIGHT COMPENSATIONIf BLC is selected, adjust the size nad position of the mask:- H-POS: Move the Zone position left or right. The higher the number,the zone will move to the right.- V-POS: Move the Zone position up or down. The higher the number,the zone will move down.- H-Size: Reset the zone‘s size horizontally. The higher the number,the right side panel will move further to the right.- V-Size: Reset the zone’s size vertically. The higher the number, thebottom side panel will move further down.WDR Wide Dynamic RangeIf WDR is selected, adjust the WDR level (Weight) in the submenu. Select from Low, Middle, or High (Default).EXPOSUREDRC DYNAMIC RANGE COMPRESSORDRC enables dark areas in images to become more visible without overexposing thebright areas to create one perfect image. Select from: OFF / ON.NOTE: If WDR or DEFOG are enabled, the DRC settings are set automatically and will not be available for adjustment.DEFOG Allows the camera to process a scene that is obscured by fog or weather conditions and provides a visibly improved image.AUTO / Manual: Select AUTO to have the WDR and DRC levels adjusted automatically.Set the DEFOG level from LOW / MIDDLE / HIGH.AGC A UTO GAIN CONTROL0~10AGC enhances the picture brightness in low light conditions. A higher level AGC setting makes the images brighter; however, it could increase the amount of noise.STARLIGHT Automatically activates slow shutter function when the image is too dark. OFF / x2 ~ x34 H igh values are not recommended as they may causes the image to lag. (Default: X4) Starlight menu cannot be controlled if the SHUTTER setting is above 1/60.3D DNR 3D DIGITAL NOISE REDUCTIONOFF/ LOW/ 3D-DNR reduces the noise on the screen in low light conditions andMID/ HIGH allows for clearer images, even at night.COLORATWAuto Tracking White Balance Control mode compensates for color temperature changesbetween 2400K o and 11000K o . AWB Auto White Balance Control mode compensates for color temperature changes lower than 2000K o and higher than 15000K o .PUSH Push fixes the white balance based on the current lighting automatically.MANUAL Users can control the white balance manually by changing RED GAIN and BLUE GAIN (see below). C-TEMP: Select the color temperature for the white balance setup. If enabled, the Red and Blue Gain settings will be set automatically according to the C-TEMP selected. RED GAIN: 0 ~ 20. Adjusts the amount of red in the image. BLUE GAIN: 0 ~ 20. Adjust the amount of blue in the image.COLOR GAINSet the color gain from 0~20.WB MODEDAY & NIGHTD&N MODEAUTO / Day/ Night switch will be based on the AGC levels.COLOR / The camera always stays in day/color mode.B&W The camera always stays in night/B&W mode.EXTERN Day/ Night switch will be based on using IR LED lights.AUTO:- AGC Threshold: Set when the camera switches between Day & Night.- AGC Margin: Set the value added to the AGC Threshold. Adjust thevalue based on the environment in which the camera is installed. If themargin is too low, the camera will switch from color to B/W and back.EXT.:- CDS Threshold: Marks the light level at which the camera will switch between color and B/W. The lower the value, the camera will require less light (moredarkness) to switch to Night Mode.- CDS Margin: The value added to the CDS Threshold. Adjust thisbased on the environment in which the camera is installed. If themargin is too low, the camera will switch from color to B/W and back.EXT LEDAUTO / AUTO: The LEDs are enabled/ disabled by the CDS Sensor on the LED Board. OFF OFF: The camera’s LEDs are disabled manually.DELAYLow/Mid/High Time interval delay before switching from day mode to night mode.SMART IR0 ~ 20 Enable Smart IR and set the level. Higher values will make Smart IR stronger.FUNCTIONMirror & Flip ONFlip ON Mirror ON Mirror / Flip OFFD-Zoomx1 ~ x16Enable or Disable Digital zoom to the camera’s field of view. By default, the zoomwill go to the center of the camera’s Field of View.SHARPNESS0 ~ 10Sets the image sharpness. The higher the number, the sharper the image.GAMMA0.45 ~ 0.75 S elect the desired gamma level. 0.55 is default setting.MIRROR / FLIPOFFMIRRORReflects the camera horizontally.FLIPReflects the camera vertically.MOTIONMOTION To use the motion detection settings, be fore Motion is ON.DET. WINDOW- Window Use: Select which zone to setup from the 4 motion zones available.- Window Zone: Enable or disable the selected motion zone.- DET H-POS: Move the Zone left or right. The higher the number, the zone will move to the right. - DET V-POS: Move the Zone up or down. The higher the number, the zone will move down.- DET H-Size: Adjust the zone‘s size horizontally. The higher the number, the right side panel will move further to the right.- DET V-Size: Adjust the zone’s size vertically. The higher the number, the bottom side panel will move further down.SENSITIVITYThe smaller the movement you want to detect, the higher the sensitivity value must be.MOTION OSDIf enabled, the text MOTION ZONE will appear on the screen indicating the area of motion detection.TEXT ALARMSetup a text to appear on the screen when motion is detected explaining the alarm situation. - WINDOW MOTION: Wiil appear when a motion alarm is detected.- CAMERA MOVING: Will appear if the camera is shaken abruptly.- BRIGHT CHANGE: Will appear if the brighness in the scene changes suddenly and drstically.SIGNAL OUTIf enabled, the camera can trigger an output when motion is detected.The camera can detect the movement and display an alarm on the screen when movement is detected.21PRIVACYYou can hide some parts of the screen for privacy masking. A total of 8 different privacy masking zones are available. The cameras support square privacy masks or advanced polygon masks.BOX MASKS- ZONE NUM.: Select the zone number you want to setup.- ZONE DISP.: To enable it, turn the display option ON.- H-POS: Move the Zone position Left or right. The higher thenumber, the zone will move to the right.- V-POS: Move the Zone position up or down. The higher thenumber, the zone will move down.- H-SIZE: Reset the zone‘s size horizontally. The higher thenumber, the right side panel will move further to the right.- V-SIZE: Reset the zone’s size vertically. The higher the number,the bottom side panel will move further down.- Y LEVEL- The higher the number, the brighter the color will appear.- CR LEVEL- The higher the number, the more red tone will be added to the zone’s color. The lower the number, the more green will be added to the zone’s color.- CB LEVEL- High CB Level + High CR Level = RedHigh CB Level + Low CR Level = BlueLow CB Level + High CR Level = Orange22You can hide some parts of the screen for privacy masking. A total of 8 different privacy masking zones are available. The cameras support square privacy masks or advanced polygon masks.POLYGON MASKS- ZONE NUM.: Select the zone number you want to setup.- ZONE DISP.: To enable it, turn the display option ON.-POS0-X: Move the mask’s upper left angle left to right.-POS0-Y: Move the mask’s upper left angle up and down.-POS1-X: Move the mask’s upper right angle left to right.-POS1-Y: Move the mask’s upper right angle up and down.-POS2-X: Move the mask’s lower right angle left to right.-POS2-Y: Move the mask’s lower right angle up and down.-POS3-X: Move the mask’s lower left angle left to right.-POS3-Y: Move the mask’s lower left angle up and down.- Y LEVEL- The higher the number, the brighter the color will appear.- CR LEVEL- The higher the number, the more red tone will be added to the zone’s color. The lower the number, the more green will be added to the zone’s color.- CB LEVEL- High CB Level + High CR Level = RedHigh CB Level + Low CR Level = Blue Low CB Level + High CR Level = OrangePRIVACY23SETUPCOMMUNICATIONAdjust the camera’s ID and Baudrate. Default Protocol is Pelco-D.- CAM ID: Provide an ID number for the camera (0 ~ 255).- BAUDRATE: 9600bps is default. Select the baudrate from thefollowing options: 2400/4800/9600/57600/115200 bps.CAM. TITLEAdd a name to the camera. Set the title by using the OSD joystick.IMAGE RANGEImage Range allows you to set the proper Black and White levelsaccording to the external display you use.FULL: Display all BLACK level and WHITE level withoutcompression.COMP: Display BLACK level and WHITE level with compression.USER : Reset the BLACK level by changing the OFFSET value.SETUP Array FRAME RATESet the camera’s display frame rate and resolution. Select from: 720-30P, 720-60P, 1080-30P. The camera may have to be rebooted after frame rate change.FREQUENCYWhen the camera’s image appears to have flickering issues, change the frequency value to adjust the image.LANGUAGESelect from the following: English (Default), Chinese, Chinese (S), Japanese, and Koran.DEFECT DET.The camera can detect and correct dead pixels in the image. Press the select button and set the threshold level. The camera will detect and adjust the pixels automatically.INITIALReset the camera to its default settings. Press and hold the selectbutton for five (5) seconds.2425EXITEXITSAVEExit the OSD menu after saving the recent changes. INITIAL Exit the OSD menu after resetting the camera to factory default.26FOR NO VIDEOFOR OUT-OF-FOCUS VIDEOBefore sending your camera for repair, check the following or contact our technical specialist.Check the coaxial cable and make sure it is connected securely.Check the lens’ iris adjustment at the camera’s OSD menu.Check the power supply and make sure the camera has the proper voltage and current.Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens’ manual focal and zoom adjustment. The use of a fieldtest monitor is recommended.W ARRANTY INFORMATION*Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows:LABOR: For the initial five (5) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace theunit with a new or refurbished product at its option at no charge.PARTS: In addition, the Warrantor will supply replacement parts for the initial five (5) yearsand one (1) year on IR LED.To obtain warranty or out of warranty service, please contact a Technical Support Representative at 1-866-446-3595 Monday through Friday from 9:00AM to 8:00PMEastern Standard Time.A purchase receipt or other proof of the original purchase date is required before warranty service is rendered. This warranty only covers failures due to defects in materials and workmanship which arise during normal use. This warranty does not cover damage which occurs in shipment or failures which are caused by products not supplied by the Warrantor or failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, modification, faulty installation, set-up adjustments, improper antenna, inadequate signal pickup, maladjustment of consumer controls, improper operation, power line surge, improper voltage supply, lightning damage, rental use of the product or service by anyone other than an authorized repair facility or damage that is attributable to acts of God.27L IMITS & EXCLUSIONS*There are no express warranties except as listed. The warrantor will not be liable for incidental or consequential damages (including damage to recording media without limitation) resulting from the use of these products or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitatons on how long an implied warranty lasts, so the exclusions or limitations listed above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state.If the problem is not handled to your satisfaction, then write to the following address:Digital Watchdog, Inc.ATTN: RMA Department5436 W. Crenshaw StreetTampa, FL 33634Service calls which do not involve defective materials or workmanship as determined by the Warrantor, in its sole discretion, are not covered. Costs of such service calls are the responsibility of the purchaser.28S PECIFICATIONS*29S PECIFICATIONS*3031Tel : 866-446-3595 / 813-888-9555Fax : 813-888-9262************************ Technical Support Hours : Monday-Friday 9:00am to 8:00pm EST。
Fluke ScopeMeter 测试仪说明书
Chapter 9 SpecificationsIntroductionPerformance CharacteristicsFLUKE guarantees the properties expressed in numerical values with the stated tolerance. Specified non-tolerance numerical values indicate those that could be nominally expected from the mean of a range of identical ScopeMeter test tools.Environmental DataThe environmental data mentioned in this manual are based on the results of the manufacturer’s verification procedures.Safety CharacteristicsThe test tool has been designed and tested in accordance with Standards ANSI/ISA S82.01-1994, EN 61010.1 (1993) (IEC 1010-1), CAN/CSA-C22.2No.1010.1-92 (including approval), UL3111-1 (including approval) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use.This manual contains information and warnings that must be followed by the user to ensure safe operation and to keep the instrument in a safe condition. Use of this equipment in a manner not specified by the manufacturer may impair protection provided by the equipment.198187Fluke 192/196/199Users Manual88Dual Input OscilloscopeIsolated Inputs A and B (Vertical)Bandwidth, DC CoupledFLUKE 199.......................................200 MHz (-3 dB)FLUKE 196.......................................100 MHz (-3 dB)FLUKE 192.........................................60 MHz (-3 dB)Lower Frequency Limit, AC Coupledwith 10:1 probe......................................<2 Hz (-3 dB)direct (1:1).............................................<5 Hz (-3 dB)Rise TimeFLUKE 199.......................................................1.7 ns FLUKE 196.......................................................3.5 ns FLUKE 192.......................................................5.8 ns Analog Bandwidth Limiters..............20 MHz and 10 kHz Input Coupling ...................................................AC, DC Polarity................................................Normal, Inverted Sensitivity Rangeswith 10:1 probe............................50 mV to 1000 V/div direct (1:1)......................................5 mV to 100 V/div Trace Positioning Range..............................±4 divisions Input Impedance on BNCDC Coupled.....................1 M Ω (±1 %)//15 pF (±2 pF)Max. Input Voltagewith 10:1 probe......................................600 V CAT III1000 V CAT IIdirect (1:1).............................................300 V CAT III (For detailed specifications, see “Safety ”)Vertical Accuracy....................±(1.5 % + 0.04 range/div)Digitizer Resolution...................8 bits, separate digitizerfor each inputHorizontalMaximum Time Base Speed:FLUKE 199.....................................................5 ns/div FLUKE 196.....................................................5 ns/div FLUKE 192...................................................10 ns/div Minimum Time Base Speed (Scope Record)....2 min/div Real Time Sampling Rate (for both inputs simultaneously)FLUKE199:5 ns to 2 µs /div.................................up to 2.5 GS/s 5 µs to 120 s/div..........................................20 MS/s FLUKE 196:5 ns to 2 µs /div....................................up to 1 GS/s 5 µs to 120 s/div..........................................20 MS/s FLUKE 19210 ns to 2 µs /div..............................up to 500 MS/s 5 µs to 120 s/div..........................................20 MS/sSpecificationsDual Input Oscilloscope989Record LengthScope Record Mode..........27500 points on each input Scope Normal Mode............1000 points on each input Scope Glitch Capture Mode...500 points on each input Glitch Detection5 µs to 120 s/div.......displays glitches as fast as 50 ns Waveform Display...............A, B, A+B, A-B, A*B, A vs BNormal, Average (2,4,8,64 x), Persistence Time Base Accuracy......................................±100 ppmTrigger and DelayTrigger Modes.....................................Automatic, Edge,External, Video, Pulse Width Trigger Delay............................... up to +1000 divisions Pre Trigger View...........................one full screen length Max. Delay...................................................10 secondsAutomatic Connect-and-View TriggerSource...........................................................A, B, EXT Slope.................................................Positive, NegativeEdge TriggerScreen Update..........Free Run, On Trigger, Single Shot Source...........................................................A, B, EXT Slope.................................................Positive, NegativeTrigger Level Control Range.........................±4 divisions Trigger Sensitivity A and BDC to 5 MHz at >5 mV/div........................0.5 divisions DC to 5 MHz at 5 mV/div..............................1 division 200 MHz (FLUKE 199).................................1 division 250 MHz (FLUKE 199)...............................2 divisions 100 MHz (FLUKE 196).................................1 division 150 MHz (FLUKE 196)...............................2 divisions 60 MHz (FLUKE 192)...................................1 division 100 MHz (FLUKE 192)...............................2 divisionsIsolated External TriggerBandwidth...........................................................10 kHz Modes..................................................Automatic, Edge Trigger Levels (DC to 10 kHz).................120 mV, 1.2 VVideo TriggerStandards...........................PAL, PAL+, NTSC, SECAM Modes.....................Lines, Line Select, Field 1 or Field 2Source........................................................................A Polarity...............................................Positive, Negative Sensitivity.....................................0.7 division sync levelFluke 192/196/199Users Manual90Pulse Width TriggerScreen Update...........................On Trigger, Single Shot Trigger Conditions..........<T, >T, ≈T (±10 %), ≠T(±10 %)Source.........................................................................A Polarity...................................Positive or negative pulse Pulse Time Adjustment Range.......1/100 div. to 250 div.with a maximum resolution of 50 ns.Continuous Auto SetAutoranging attenuators and time base, automatic Connect-and-View ™ triggering with automatic source selection.ModesNormal..................................15 Hz to max. bandwidth Low Frequency.......................1 Hz to max. bandwidth Minimum Amplitude A and BDC to 1 MHz.....................................................10 mV 1 MHz to max. bandwidth..................................20 mVAutomatic Capturing Scope ScreensCapacity..........................100 dual input scope Screens For viewing screens, see Replay function.Automatic Scope MeasurementsThe accuracy of all readings is within ± (% of reading +number of counts) from 18 °C to 28 °C. Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage measurements with 10:1 probe, add probe accuracy unless the probe has been calibrated on the test tool. At least 1.5 waveform period must be visible on the screen.GeneralInputs..................................................................A and B DC Common Mode Rejection (CMRR)................>100 dB AC Common Mode Rejection at 50, 60, or 400 Hz......>60 dBDC Voltage (VDC)Maximum Voltagewith 10:1 probe..................................................1000 V direct (1:1)...........................................................300 V Maximum Resolutionwith 10:1 probe.....................................................1 mV direct (1:1).........................................................100 µV Full Scale Reading........................................1100 counts Accuracy at 5 s to 5 µs/div..................±(1.5 % +5 counts)Normal Mode AC Rejection at 50 or 60 Hz ...........>60 dBSpecificationsAutomatic Scope Measurements991AC Voltage (VAC)Maximum Voltagewith 10:1 probe................................................1000 V direct (1:1).........................................................300 V Maximum Resolutionwith 10:1 probe...................................................1 mV direct (1:1).......................................................100 µV Full Scale Reading.....................................1100 counts AccuracyDC coupled:DC to 60 Hz..............................±(1.5 % +10 counts)AC coupled, low frequencies:50 Hz direct (1:1).....................±(2.1 % + 10 counts)60 Hz direct (1:1).....................±(1.9 % + 10 counts)With the 10:1 probe the low frequency roll off point will be lowered to 2 Hz, which improves the AC accuracy for low frequencies. When possible use DC coupling for maximum accuracy.AC or DC coupled, high frequencies:60 Hz to 20 kHz.......................±(2.5 % + 15 counts)20 kHz to 1 MHz.........................±(5 % + 20 counts)1 MHz to 25 MHz......................±(10 % + 20 counts)For higher frequencies the instrument ’s frequency roll off starts affecting accuracy.Normal Mode DC Rejection...........................>50 dBAll accuracies are valid if:• The waveform amplitude is larger than one division • At least 1.5 waveform period is on the screenAC+DC Voltage (True RMS)Maximum Voltagewith 10:1 probe................................................1000 V direct (1:1).........................................................300 V Maximum Resolutionwith 10:1 probe...................................................1 mV direct (1:1).......................................................100 µV Full Scale Reading.....................................1100 counts AccuracyDC to 60 Hz ...............................±(1.5 % + 10 counts)60 Hz to 20 kHz..........................±(2.5 % + 15 counts)20 kHz to 1 MHz............................±(5 % + 20 counts)1 MHz to 25 MHz ........................±(10 % + 20 counts)For higher frequencies the instrument ’s frequency roll off starts affecting accuracy.Fluke 192/196/199Users Manual92Amperes (AMP)With Optional Current Probe or Current ShuntRanges...........................same as VDC, VAC, VAC+DC Probe Sensitivity................100 µV/A, 1 mV/A, 10 mV/A,100 mV/A, 1 V/A, 10 V/A, and 100 V/A Accuracy ........................same as VDC, VAC, VAC+DC(add current probe or current shunt accuracy)PeakModes.........................Max peak, Min peak, or pk-to-pk Maximum Voltagewith 10:1 probe...............................................1000 V direct (1:1)........................................................300 V Maximum Resolutionwith 10:1 probe................................................10 mV direct (1:1).........................................................1 mV Full Scale Reading.......................................800 counts AccuracyMax peak or Min peak.............................±0.2 division Peak-to-peak..........................................±0.4 divisionFrequency (Hz)Range....................................1.000 Hz to full bandwidth Full Scale Reading....................................9 999 counts with at least 10 waveform periods on screen.Accuracy1 Hz to full bandwidth....................±(0.5 % +2 counts)Duty Cycle (DUTY)Range...................................................4.0 % to 98.0 %Pulse Width (PULSE)Resolution (with GLITCH off).......................1/100 division Full Scale Reading.......................................999 counts Accuracy1 Hz to full bandwidth....................±(0.5 % +2 counts)SpecificationsAutomatic Scope Measurements993PowerPower Factor .....................ratio between Watts and VA Range......................................................0.00 to 1.00Watt.................................RMS reading of multiplicationcorresponding samples of input A (volts)and Input B (amperes)Full Scale Reading ....................................999 counts VA............................................................Vrms x Arms Full Scale Reading ....................................999 counts VA Reactive................................................√((VA)2-W 2)Full Scale Reading ....................................999 countsPhaseRange..........................................-180 to +180 degrees Resolution.......................................................1 degree Accuracy0.1 Hz to 1 MHz........................................±1 degrees 1 MHz to 10 MHz......................................±3 degreesTemperature (TEMP)With Optional Temperature ProbeRanges (°C or °F)...............................-40.0 to +100.0 °-100 to +250 °-100 to +500 °-100 to +1000 °-100 to + 2500 °Probe Sensitivity..........................1 mV/°C and 1 mV/°FDecibel (dB)dBV..............................................dB relative to one volt dBm.................dB relative to one mW in 50 Ω or 600 ΩdB on........................................VDC, VAC, or VAC+DC Accuracy.........................same as VDC, VAC, VAC+DCFluke 192/196/199Users Manual94MeterMeter InputInput Coupling ..........................................................DC Frequency Response.....................DC to 10 kHz (-3 dB)Input Impedance..............1 M Ω(±1 %)//10 pF (±1.5 pF)1000 V CAT II600 V CAT III(For detailed specifications, see “Safety ”)Meter FunctionsRanging....................................................Auto, Manual Modes.................................................Normal, RelativeDMM Measurements on Meter InputsThe accuracy of all measurements is within ± (% of reading + number of counts) from 18 °C to 28 °C.Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C.GeneralDC Common Mode Rejection (CMRR)................>100 dB AC Common Mode Rejection at 50, 60, or 400 Hz......>60 dBOhms (Ω)Ranges..............................500.0 Ω, 5.000 k Ω, 50.00 k Ω,500.0 k Ω, 5.000 M Ω, 30.00 M ΩFull Scale Reading500 Ω to 5 M Ω...........................................5000 counts 30 M Ω........................................................3000 counts Accuracy.............................................±(0.6 % +5 counts)Measurement Current.................0.5 mA to 50 nA, ±20 %decreases with increasing ranges Open Circuit Voltage.................................................<4 VContinuity (CONT)Beep.......................................................<50 Ω (±30 Ω)Measurement Current............................0.5 mA, ±20 %Detection of shorts of...........................................≥1 msSpecificationsDMM Measurements on Meter Inputs995DiodeMaximum Voltage Reading....................................2.8 V Open Circuit Voltage..............................................<4 V Accuracy.............................................±(2 % +5 counts)Measurement Current............................0.5 mA, ±20 %Temperature (TEMP)With Optional Temperature ProbeRanges (°C or °F)...............................-40.0 to +100.0 °-100.0 to +250.0 °-100.0 to +500.0 °-100 to +1000 °-100 to + 2500 °Probe Sensitivity..........................1 mV/°C and 1 mV/°FDC Voltage (VDC)Ranges....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V Full Scale Reading.....................................5000 counts Accuracy..........................................±(0.5 % +5 counts)Normal Mode AC Rejection at 50 or 60 Hz ±1 %>60 dBAC Voltage (VAC)Ranges....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V Full Scale Reading.....................................5000 counts Accuracy15 Hz to 60 Hz...............................±(1 % +10 counts)60 Hz to 1 kHz.............................±(2.5 % +15 counts)For higher frequencies the frequency roll off of the Meter input starts affecting accuracy.Normal Mode DC Rejection................................>50 dBAC+DC Voltage (True RMS)Ranges....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V Full Scale Reading.....................................5000 counts AccuracyDC to 60 Hz ...................................±(1 % +10 counts)60 Hz to 1 kHz.............................±(2.5 % +15 counts)For higher frequencies the frequency roll off of the Meter input starts affecting accuracy.All accuracies are valid if the waveform amplitude is larger than 5 % of full scale.Fluke 192/196/199Users Manual96Amperes (AMP)With Optional Current Probe or Current ShuntRanges...........................same as VDC, VAC, VAC+DC Probe Sensitivity................100 µV/A, 1 mV/A, 10 mV/A,100 mV/A, 1 V/A, 10 V/A, and 100 V/A Accuracy ........................same as VDC, VAC, VAC+DC(add current probe or current shunt accuracy)RecorderTrendPlot (Meter or Scope)Chart recorder that plots a graph of min and max values of Meter or Scope measurements over time.Measurement Speed...................> 2.5 measurements/s Time/Div.......................................10 s/div to 20 min/div Record Size................................13500 points per input Recorded Time Span...........................90 min to 8 days Time Reference...................time from start, time of dayScope RecordRecords scope waveforms in deep memory while displaying the waveform in Roll mode.Source...................................................Input A, Input B Max. Sample Speed (10 ms/div to 1 min/div).....20 MS/s Glitch capture (10 ms/div to 1 min/div)..................50 ns Time/Div in normal mode.............10 ms/div to 2 min/div Record Size.................................27500 points per input Recorded Time Span............................11 s to 30 hours Acquisition Modes.....................................Single SweepContinuous Roll External Triggering Time Reference...................time from start, time of dayZoom, Replay and CursorsZoomHorizontal MagnificationScope Record........................................... up to 100x TrendPlot.....................................................up to 50x Scope............................................................up to 8x ReplayDisplays a maximum of 100 captured dual input Scope screens.Replay modes..........Step by Step, Replay as Animation Cursor MeasurementsCursor Modes................................single vertical cursordual vertical cursorsdual horizontal cursors (Scope mode)Markers....................automatic markers at cross points Measurements.....................................value at cursor 1value at cursor 2 difference between values at cursor 1 and 2time between cursorsTime of Day (Recorder modes)Time from Start (Recorder modes)Rise Time MiscellaneousDisplayView Area......................................132 mm (5.2 inches) Backlight...................Cold Cathode Fluorescent (CCFL)Temperature compensated Brightness.............................Power Adapter: 60 cd / m2Batteries: 35 cd / m2 Rechargeable NiMH Batteries:Operating Time...............................................4 hours Charging Time.................................................4 hours Allowable ambienttemperature during charging:.0 to 40 °C (32 to 104 °F) Auto power downtime (battery saving):............5 min, 30 min or disabled Battery Charger / Power Adapter BC190:•BC190/801 European line plug 230 V ±10 %•BC190/803 North American line plug 120 V ±10 %•BC190/804 United Kingdom line plug 230 V ±10 %•BC190/806 Japanese line plug 100 V ±10 %•BC190/807 Australian line plug 230 V ±10 %•BC190/808 Universal switchable adapter 115 V ±10 % or 230 V ±10 %, with plug EN60320-2.2GLine Frequency........................................ 50 and 60 Hz97Users Manual98Probe CalibrationManual pulse adjustment and automatic DC adjustment with probe check.Generator Output....................................3 Vpp / 500 Hzsquare waveMemoryNumber of Scope Memories.......................................10Each memory can contain two waveforms plus corresponding setupsNumber of Recorder Memories....................................2Each memory can contain:• a dual input TrendPlot(2 x 13500 points per input)• a dual input Scope Record (2 x 27500 points per input)• 100 dual input Scope screensMechanicalSize.....................64 x 169 x 254 mm (2.5 x 6.6 x 10 in)Weight..................................................1.95 kg (4.3 lbs)including batteryOptical InterfacePortType.......................................RS-232, optically isolated To Printer...........................supports Epson FX, LQ, andHP Deskjet ®, Laserjet ®, and Postscript• Serial via PM9080 (optically isolated RS-232 Adapter/Cable, optional).• Parallel via PAC91 (optically isolated Print Adapter Cable, optional).To PC/Notebook• Serial via PM9080 (optically isolated RS-232 Adapter/Cable, optional), using SW90W (FlukeView ®softwarefor Windows 95®, 98®, Me ®, 2000® and NT4®).Environmental -PRF-28800F, Class 2TemperatureOperating:battery only.........................0 to 50 °C (32 to 122 °F) power adapter....................0 to 40 °C (32 to 104 °F) Storage..........................-20 to +60 °C (-4 to +140 °F)HumidityOperating:0 to 10 °C (32 to 50 °F).....................noncondensing10 to 30 °C (50 to 86 °F).................................. 95 %30 to 40 °C (86 to 104 °F).................................75 %40 to 50 °C (104 to 122 °F)...............................45 % Storage:-20 to +60 °C (-4 to +140 °F)............noncondensingAltitude Operating.......................................3 km (10 000 feet) Storage........................................12 km (40 000 feet)Vibration (Sinusoidal).......................................max. 3 gShock............................................................max. 30 g Electromagnetic Compatibility (EMC)Emission and immunitiy...........EN-IEC61326-1 (1997) Enclosure Protection...........................IP51, ref: IEC52999Users Manual100Designed for measurements on 1000 V Category II Installations, 600 V Category III Installations, Pollution Degree 2, per:• ANSI/ISA S82.01-1994• EN61010-1 (1993) (IEC1010-1)• CAN/CSA-C22.2 No.1010.1-92• UL3111-1Max. Input VoltagesInput A and B directly.............................300 V CAT III Input A and B via 10:1 probe.................1000 V CAT II600 V CAT IIIMETER/EXT TRIG inputs......................1000 V CAT II600 V CAT III From any terminal to ground.................1000 V CAT II600 V CAT IIIBetween any terminal............................1000 V CAT II600 V CAT III Voltage ratings are given as “working voltage”. They should be read as Vac-rms (50-60 Hz) for AC sinewave applications and as Vdc for DCapplications.Figure 51. Max. Input Voltage v.s. FrequencyNoteOvervoltage Category III refers to distribution level and fixed installation circuits inside abuilding. Overvoltage Category II refers to local level, which is applicable for appliances and portable equipment.Figure 52. Safe Handling: Max. Input Voltage Between Scope References, and BetweenScope References and Meter Reference 10:1 ProbeSafetyMax. Input Voltage..........................1000 V CAT II600 V CAT III Max. Floating Voltagefrom any terminal to ground...................1000 V CAT II600 V CAT IIIup to 400 Hz Electrical specificationsInput Impedance at probe tip10 MΩ (±2 %)//14 pF (±2 pF)Capacity Adjustment Range.........................10 to 22 pF Attenuation at DC (1 MΩ input)....................10 x (±2 %) Bandwidth (with FLUKE 199)......DC to 200 MHz (-3 dB) EnvironmentalTemperatureOperating...........................0 to 50 °C (32 to 122 °F) Storage........................-20 to +60 °C (-4 to +140 °F) AltitudeOperating....................................3 km (10 000 feet) Storage......................................12 km (40 000 feet) HumidityOperating at 10 to 30 °C (50 to 86 °F).............. 95 %101Users Manual102FR E QUE NCY (MHz)MAX. INPUTVOLT Figure 53. Max. Voltage From Probe Tip to Groundand From Probe Tip to Probe ReferenceFR E QUE NCY (MHz)MAX. VOLT AGEF ROM PR OBE R E FE R E NCE T O GROUNDFigure 54. Safe Handling: Max. Voltage From ProbeReference to GroundElectromagnetic ImmunityThe Fluke 190 series, including standard accessories, conforms with the EEC directive 89/336 for EMC immunity, as defined by EN-61326-1, with the addition of the following tables.Scope Mode (10 ms/div): Trace disturbance with VPS200 voltage probe shortedTable 1No visible disturbance E = 3V/mFrequency range 10 kHz to 20 MHz 5 mV/div to 100 V/divFrequency range 20 MHz to 100 MHz100 mV/div to 100 V/divFrequency range 100 MHz to 1 GHz500 mV/div to 100 V/div *)(*)With the 20 MHz Bandwidth Filter switched on: no visible disturbance.With the 20 MHz Bandwidth Filter switched off: disturbance is max 2 div.Table 2Disturbance less than 10% of full scale E = 3V/mFrequency range 20 MHz to 100 MHz10 mV/div to 50 mV/divTest Tool ranges not specified in tables 1 and 2 may have a disturbance of more than 10% of full scale.Meter Mode (Vdc, Vac, Vac+dc, Ohm and Continuity): Reading disturbance with test leads shortedTable 3Disturbance less than 1% of full scale E = 3V/mFrequency range 10 kHz to 1 GHz500mV to 1000V , 500Ohm to 30 MOhm ranges103。
索尼1 3英寸1.3MP进度式图像传感器摄像头说明书
Frame Rate...................................Max 50P/60P
Defog.............................................On (Auto / Manual) / Off
Video Output.................................1.0Vp-p / 75 ohms
Total Pixels....................................1312 (H) x 1069 (V)
Motion Tracking.............................On / Off
TV System ....................................NTSC
Dimensions...................................3.94” (W) x 3.94” (H) x 8.27” (L)
Day/Night......................................Color / BW / Auto / Ext
Weight...........................................3.09” lbs.
1000
TVL
3.94” (W)
8.27” (L)
3.94” (H)
Specifications
Image Sensor................................1/3” 1.3MP Sony Sensor
Brightness.....................................0 - 20 (level adjustable)
Akai Tv Instruction Manual
Able to download our manuals account to download our service again. Anonymous data that help you are in learning more about. Help us improve the brands you will need a free. This data that help us improve the brands you to see you are in pdf format. Data is collected tv instruction using our manuals account to see you are the website. This data that help you are glad to see you are the website. See you are the brands you will help you are interested in learning more about. Uses cookies exclusively to be able to gather anonymous data that help us improve the website. Data that help you are glad to be able to see you are the website. Brands you are instruction be able to gather anonymous data that help us improve the property of their respective owners. basketball instruction for kids johnson before chromosomes can form dna must maxxhorn friends at the table vacancy
Freeport Technologies Multi-Domain Video Network S
Multi ‐Domain Video Network SwitchMDVNSThe Freeport Technologies Multi ‐Domain Video Network Switch (MDVNS) provides an automated periods processing procedure to safely and securely switch between numerous video networks of varying classification levels using a single video CODEC. The MDVNS is the only secure VTC switching solution that has been approved by the Defense Intelligence Agency for use on the JWICS Top Secret network. It has also been approved for operation by DISA for NIPR, SIPR, NRO, NGA, Coalition Forces, and many other classified networks.The MDVNS adheres to the DISA approved periods processing procedure (as detailed in the STIG dated January 2015 Version 1, Release 5) when traversing video networks, which is consistent throughout every system configuration regardless of the number of networks or network type being utilized (IP or ISDN). The period processing procedures along with the unique design of the Freeport MDVNS hardware components ensures that security requirements will be met during the switching and operational processes.Security Risk MitigationIn an environment where a single video CODEC is used to support multiple video communication networks, security related risks can be minimized. A system design based on a single video CODEC utilizing a multi ‐domain switching system alleviates a majority of the security requirements involved with the sharing of AV resources (inputs, outputs, control). It also alleviates the high cost associated with purchasing multiple video CODECs, and if implemented correctly, provides an automated set of procedures to traverse those networks thus eliminating manual errors while maximizing data security.Design ApproachThe MDVNS design approach focuses on ensuring physical video network security, video CODEC information security, inter ‐unit isolation, hardware fail safes and redundant isolation. This approach provides electrical and data isolation between all video networks. Data isolation is achieved through the use of multiple processor and memory units, where each unit is dedicated to a particular network. Data from a particular video network is never stored in more than one place and data from different networks is never intermingled into one processor and memory unit.FeaturesSecureConforms to the DISA periods processing procedures and satisfies related IA security requirementsFailsafe ProcessEliminates residual settings or data from being transferred from one network to anotherRed/Black SeparationProvides true red/black air gap separation and isolated grounds between networks and all system componentsApproved IsolationUtilizes a CCEVS/NIAP validated and DISA approved fiber based switching unit to manage and isolate all video networksISDN CapableAutomated Unclassified ISDN management and isolation including support of third party Secure/Non ‐secure switchesSource ManagementAutomated control of source management isolation devicesScalabilityCan be configured to operate across numerous video networksStand ‐Alone or API ControlFront panel operation or API integration with AMX, Crestron, and Extron AV room control systemsDATASHEET Freeport Technologies Multi‐Domain Video Network SwitchProduct SpecificationsComponents and FunctionsFreeport SCC5NET Switch∙Enforces and initiates all switching tasks and the order in which they occur∙Validates that all tasks are executed as intended∙Manages room classification signage∙Provides the RS‐232 connection path between the video CODEC and all other system components∙Controls the removal and application of power to the video CODEC, Freeport SCC units, and media converters ∙Provides dry contact closures for managing source isolation devices∙Manages the fiber optic network switch∙Manages all ISDN related components∙Responsible for enabling/disabling a POTS, VOIP or unclassified ISDN line∙Front panel LCD provides access to system information, network selection, and maintenance∙Manages and isolates the connection of an external room control system to the video CODECFreeport Secure CODEC Configurator (SCC)∙Used to capture, clean and restore the configuration settings of the video CODEC for a specific video networkor domain∙Provides data isolation of video CODEC configuration settings between all video networks∙Capable of capturing and restoring all video CODEC configuration settings provided by the manufacturer ∙Capable of restoring video CODEC passwords∙Firmware management provides the ability to support various video CODEC makes/modelsFiber Optic A/B/C Switch∙NIAP validated and DISA approved switch manages and isolates all IP video network connections∙Only hardware component in the MDVNS system that physically connects to a customer’s network(s)Fiber Optic Media Converters∙Enables/Disables the network connection between the Fiber Optic Network Switch and the video CODEC∙Provides second layer of isolation between the customer’s IP video network connections and the Fiber Optic NetworkSwitchRoom Signage∙Provides the ability to display Joining, Leaving, and Network Classification messages for classification awareness∙Provides switching process feedback such as Preparing System, System Off, and ErrorPhysical Characteristics∙Freeport SCC5NET Switch – 1 RU∙Freeport SCC Unit – .25 RU each∙3 Network Fiber Optic Switch – 1 RU∙CODEC Fiber Optic Media Converter – .25 RU∙Network Fiber Optic Media Converter – .25 RU each Electrical∙Freeport SCC5NET Switch – 63W∙Freeport SCC Unit – Powered by SCC5Net Switch∙3 Network Fiber Optic Switch – 60W∙CODEC Fiber Optic Media Converter – 60W∙Network Fiber Optic Media Converter – 60W Environmental∙Heat Dissipation – 1033.88 BTU/hr Max (2 Network IP Only) ∙Operating Temperature – 32° to 104°F (0° to 40°C)∙Storage Temperature – 0° to 122°F (‐18° to 50°C)∙Humidity – 10% to 90% RH (non‐condensing)∙Made in the U.S.AWarranty and SupportService and support agreements provide technical telephone support, onsite troubleshooting, and software updates asneeded.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Chapter 5 - SDV evaluation boards
5.1 SDV evaluation/demo boards 5.2 Adaptive cable equalizer evaluation boards 5.2.1 SD012EVK and SD014EVK — overview 5.3 Cable driver evaluation boards 5.3.1 SD001EVK/SD005EVK/SD006EVK/SD007EVK — overviews 5.4 SMPTE 295 serial digital video receiver (equalizer, retimer and decoder, and cable driver) 5.4.1 SD901EVK — overview 5.5 SD serializers 5.5.1 SD020EVK — overview 5.5.2 SD021-5EVK and SD021-3EVK — overview 5.6 SD/HD serializer and deserializers 5.6.1 SD130EVK/SD131EVK — overview 5.6.2 SD130EVK — CLC030 serializer 5.6.3 SD131EVK — CLC031 deserializer 5-1 5-2 5-2 5-3 5-3 5-4 5-4 5-5 5-5 5-5 5-6 5-6 5-6 5-7
/appinfo/interface/sdv.html
Broadcast Video Owner’s Manual
Chapter 3 - Serial digital video integrated circuits
3.1 Adaptive cable equalizers 3.1.1 Basic operation 3.1.2 CLC014 3.1.3 CLC012 3.1.4 Typical application 3.1.5 Equalizer application tips 3.2 Reclockers 3.2.1 Basic operation 3.2.2 CLC016 3.2.3 Typical application 3.2.4 Reclocker application tips 3.3 Cable drivers 3.3.1 CLC001 3.3.2 Typical application 3.3.3 CLC005/CLC006/CLC007 3.3.4 Cable driver application tips 3.4 Serializers 3.4.1 Basic operation 3.4.2 CLC020 3.4.3 CLC021 3.4.4 Typical application 3.4.5 CLC020/CLC021 application tips 3.4.6 CLC030 3.4.7 Typical application 3.4.8 CLC030 application tips 3.5 Deserializers 3.5.1 Basic operation 3.5.2 CLC011 3.5.3 Typical application 3.5.4 CLC011 application tips 3.5.5 CLC031 3.5.6 Typical application 3.5.7 CLC031 application tips 3.6 Crosspoint switches 3.6.1 Basic operation 3.6.2 CLC018 3-2 3-2 3-3 3-4 3-4 3-6 3-9 3-9 3-10 3-10 3-12 3-12 3-12 3-13 3-13 3-14 3-15 3-15 3-17 3-17 3-17 3-19 3-19 3-19 3-20 3-20 3-20 3-22 3-22 3-22 3-22 3-22 3-23 3-23 3-23 3-24
Chapter 2 - System design elements
2.1 Power systems 2.1.1 Power and grounds 2.1.2 PCB layout for serial digital video systems 2.1.3 Voltage regulators and local supply regulation 2.1.4 Planes, pads, and vias 2.2 Transmission line systems 2.2.1 Network topologies 2.2.2 Differential lines 2.2.3 Termination 2.2.4 System-to-system transmission 2.3 Signal path inputs and outputs 2.3.1 Network component and layout guidelines 2.3.2 Bipolar cable driver inputs — CLC005, CLC006, and CLC007 2.3.3 Cable driver outputs — voltage mode 2.3.4 Cable driver outputs — current mode 2.3.5 ECL-compatible inputs 2.3.6 ECL-compatible outputs 2.3.7 CLC011 CMOS outputs 2.3.8 CLC012 and CLC014 Adaptive cable equalizer data inputs 2-1 2-1 2-3 2-8 2-8 2-9 2-9 2-11 2-16 2-19 2-25 2-25 2-26 2-28 2-30 2-31 2-31 2-33 2-33
Glossary
/appinfo/interface/sdv.html
5
Chapter 1 Introduction to broadcast video
1.1 Introduction
The production of television and film has been transformed through the use of digital production techniques. Improvements in digital imaging have spurred worldwide adoption of digital video transmission and processing. Many advantages accompany this change: lossless archiving and transmission, improved editing and special effects, greater picture definition, improved audio processing and quality, to mention but a few. The digital transition has not been without accompanying problems for the TV system and equipment design engineer. The new digital signal realm that he or she must contend with extends into portions of the electromagnetic spectrum considered as microwave but a few years ago. And the semiconductor devices that process these signals present a new array of design problems and challenges. National Semiconductor’s Broadcast Video Owner’s Manual addresses components and their application in digital video circuits and systems. It is intended as a guide to best practices and proven design techniques that will assist the video engineer in the design task. Many areas are covered including: signals and data coding, mechanical and electrical components, power supply systems, signal transmission systems, testing and device-specific issues. Also included are guides to other resources that will assist and inform the designer.
National Semiconductor’s SDV Group
able of contents
Chapter 1 - Introduction to broadcast video
1.1 1.2 1.3 1.4 Introduction Standards organizations Digital video signals Digital video data structures 1.4.1 Timing reference signals (TRS) 1.4.2 Serial data representation — standard-definition 1.4.3 Serial data representation — high-definition 1.4.4 Pathological data sequences 1.5 Serial digital interface electrical parameters 1.6 Serial digital interface mechanical parameters 1-1 1-1 1-1 1-2 1-4 1-4 1-5 1-5 1-7 1-7