MAX207CDW中文资料
Z23S2407N中文资料(AEROVOX)中文数据手册「EasyDatasheet - 矽搜」
芯片中文手册,看全文,戳
Aerovox公司 ®
SuperMet & ZeMax TM 技术指标
特征
Aerovox路线SuperMet和ZEMAX
TM 电容器
•可根据金属外壳（铝合金外壳
利用最先进金属化聚丙烯薄膜技术状态.这款最新设
请求 - 请联系工厂）SuperMet
计材料结合领先设计技术,具有40多年电容经验.
咨询厂家
电气特性
应用
• 窗式空调 • 单元式空调 • 电动汽车 • 风扇与鼓风机 • Pumps • 洗衣房设备 • 除湿机 • 压缩机 •炉
• 温度范围：-40〜+ 70℃. • 电容范围3至80μF. • 电容公差±10％. • 电压范围240至440 VAC,60赫兹. • 损耗因数0.1％以下@ 60赫兹和25℃. • 绝缘电阻1000MΩ每μF.
芯片中文手册,看全文,戳
Aerovox公司 ®
交流电动机运行电容器
ZeMax TM - 铝合金外壳
AEROMET II - 塑料盒
美国制造
SuperMet - 金属外壳
芯片中文手册,看全文,戳
Aerovox公司 ®
目录
AEROMET II规格（系列M型）.......................................... .................................... 3 SuperMet & ZeMax TM 规格（系列Z型）............................................ .................. 4 部分编号系统.............................................................................................................五 AEROMET II评分表（单台容量）系列M型....................................... ........... 6 AEROMET II评分表（双功能）系列型号M ....................................... ............. 8 SuperMet评分表（单台容量）系列Z型........................................ ............... 9 SuperMet评分表（双容量）系列Z型........................................ .............. 11 ZeMax TM 评分表（单台容量）系列Z型......................................... ........... 13 AEROMET II机械尺寸.............................................. .......................................... 15 SuperMet机械尺寸............................................... ........................................... 16 ZeMax TM 机械Dimensions............................................................................................17 附件 - 安装硬件.............................................. ............................................ 18
MAX213CAI-T中文资料
General DescriptionThe MAX200–MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication inter-faces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V need-ed for RS-232 output levels. The MAX201 and MAX209operate from +5V and +12V, and contain a +12V to -12V charge-pump voltage converter.The MAX200–MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The 5µW shutdown mode of the MAX200, MAX205,MAX206, and MAX211 conserves energy in battery-powered systems. The MAX213 has an active-low shut-down and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indica-tor (RI) to be monitored easily using only 75µW power.The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now avail-able in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components,and are recommended for applications with limited circuit board space.ApplicationsComputersLaptops, Palmtops, Notebooks Battery-Powered Equipment Hand-Held Equipment Next-Generation Device Features ♦For Low-Cost Applications:MAX221E: ±15kV ESD-Protected, +5V, 1µA, Single RS-232 Transceiver with AutoShutdown™♦For Low-Voltage and Space-Constrained Applications:MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA,+3.0V to +5.5V, Up to 1Mbps, True RS-232Transceivers (MAX3246E Available in UCSP™Package)♦For Space-Constrained Applications:MAX3228E/MAX3229E: ±15kV ESD-Protected,+2.5V to +5.5V, RS-232 Transceivers in UCSP ♦For Low-Voltage or Data Cable Applications:MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA,2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins ♦For Low-Power Applications:MAX3224E–MAX3227E/MAX3244E/MAX3245E:±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to+5.5V, RS-232 Transceivers with AutoShutdown Plus™MAX200–MAX211/MAX213+5V , RS-232 Transceivers with 0.1µF External Capacitors ________________________________________________________________Maxim Integrated Products 119-0065; Rev 6; 10/03For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at .Ordering Information appears at end of data sheetAutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc.MAX200–MAX211/MAX213+5V , RS-232 Transceiverswith 0.1µF External Capacitors______________________________________________________________________________________19Ordering Information*Contact factory for dice specifications.M A X 200–M A X 211/M A X 213+5V , RS-232 Transceiverswith 0.1µF External Capacitors Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.20____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600©2003 Maxim Integrated ProductsPrinted USAis a registered trademark of Maxim Integrated Products.Package Information(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to /packages .)。
MEMORY存储芯片MAX207CAG+T中文规格书
V CC ..........................................................................-0.3V to +6VV+ ..............................................................(V CC - 0.3V) to +14VV- ...........................................................................+0.3V to -14VInput VoltagesT IN ........................................................-0.3V to (V CC + 0.3V)R IN ...................................................................................±30VOutput VoltagesT OUT ................................................(V+ + 0.3V) to (V- - 0.3V)R OUT ....................................................-0.3V to (V CC + 0.3V)Short-Circuit DurationT OUT ......................................................................ContinuousContinuous Power Dissipation (T A = +70°C)14-Pin Plastic DIP (derate 10.00mW/°C above +70°C) ...800mW16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) ...842mW16-Pin SO (derate 8.70mW/°C above +70°C).............696mW16-Pin Wide SO (derate 9.52mW/°C above +70°C) ...762mW16-Pin CERDIP (derate 10.00mW/°C above +70°C) .....800mW20-Pin Plastic DIP (derate 11.11mW/°C above +70°C) ...889mW 20-Pin Wide SO (derate 10.00mW/°C above +70°C) ..800mW 20-Pin CERDIP (derate 11.11mW/°C above +70°C) ...889mW 24-Pin Narrow Plastic DIP (derate 13.33mW/°C above +70°C) .......................1067mW 24-Pin Wide Plastic DIP (derate 9.09mW/°C above +70°C) ...........................727mW 24-Pin Wide SO (derate 11.76mW/°C above +70°C)..941mW 24-Pin SSOP (derate 8.00mW/°C above +70°C) ........640mW 24-Pin CERDIP (derate 12.50mW/°C above +70°C) ...1000mW 28-Pin Wide SO (derate 12.50mW/°C above +70°C) ..1000mW 28-Pin SSOP (derate 9.52mW/°C above +70°C) ........762mW Operating Temperature Ranges MAX2_ _C_ _ .....................................................0°C to +70°C MAX2_ _E_ _ .................................................-40°C to +85°C MAX2_ _ M_ _ ..............................................-55°C to +125°C Storage Temperature Range ............................-65°C to +160°C Lead Temperature (soldering, 10s) (Note 1) ...................+300°C(MAX202/MAX204/MAX206/MAX208/MAX211/MAX213: V CC = +5V ±10%; MAX200/MAX203/MAX205/MAX207: V CC = +5V ±5%, C1–C4 = 0.1µF; MAX201/MAX209: V CC = +5V ±10%, V+ = +9.0V to +13.2V, T A = T MIN to T MAX , unless otherwise noted.)PARAMETERCONDITIONS MIN TYP MAX UNITS Output-Voltage SwingAll transmitter outputs loaded with 3kΩ to ground ±5±8V V CC Power-SupplyCurrent No load, T A = +25°C MAX202, MAX203815mA MAX200, MAX204–MAX208, MAX211,MAX2131120MAX201, MAX2090.41V+ Power-Supply CurrentNo load MAX201510mA MAX209715Shutdown Supply CurrentFigure 1, T A = +25°C MAX200, MAX205, MAX206, MAX211110µA MAX2131550Input Logic Threshold LowT IN , EN , SHDN, EN, SHDN 0.8V Input Logic Threshold HighT IN 2.0V EN , SHDN, EN, SHDN 2.4Logic Pullup CurrentT IN = 0V15200µA RS-232 Input-VoltageOperating Range -30+30V Integrated │ 2Note 1: Maximum reflow temperature for the MAX203 and MAX205 is +225°C.Absolute Maximum RatingsStresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.Electrical Characteristics找MEMORY 、二三极管上美光存储The MAX200–MAX209/MAX211/MAX213 guaranteed +0.8V threshold (+0.6V in shutdown for the MAX213)ensures that receivers shorted to ground have a logic 1output. Also, the 5kΩ input resistance to ground ensures that a receiver with its input left open also has a logic 1output.Receiver inputs have approximately +0.5V hysteresis. This provides clean output transitions, even with slow riseand fall time input signals with moderate amounts of noiseand ringing. In shutdown, the MAX213 receivers R4 andR5 have no hysteresis.Figure 3. Transition Slew-Rate Test CircuitMAX200–MAX209/MAX211/MAX213+5V, RS-232 Transceivers with 0.1μF External CapacitorsFigure 4. Dual Charge-Pump DiagramRS-232 ReceiversThe receivers convert RS-232 signals to CMOS logicoutput levels. Receiver outputs are inverting, maintainingcompatibility with driver outputs. The guaranteed receiverinput thresholds of +0.8V and +2.4V are significantlytighter than the ±3.0V threshold required by the EIA/TIA-232E specification. This allows receiver inputs to respondto TTL/CMOS logic levels and improves noise margin for RS-232 levels. Integrated │ 6。
MAX208ECWG-T中文资料
________________________________________________________________Maxim Integrated Products 1General DescriptionThe MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup.The various combinations of features are outlined in the Selector Guide.The drivers and receivers for all ten devices meet all EIA/TIA-232E and CCITT V.28specifications at data rates up to 120kbps, when loaded in accordance with the EIA/TIA-232E specification.The MAX211E/MAX213E/MAX241E are available in 28-pin SO packages, as well as a 28-pin SSOP that uses 60% less board space. The MAX202E/MAX232E come in 16-pin TSSOP, narrow SO, wide SO, and DIP packages. The MAX203E comes in a 20-pin DIP/SO package, and needs no external charge-pump capacitors. The MAX205E comes in a 24-pin wide DIP package, and also eliminates external charge-pump capacitors. The MAX206E/MAX207E/MAX208E come in 24-pin SO, SSOP, and narrow DIP packages. The MAX232E/MAX241E operate with four 1µF capacitors,while the MAX202E/MAX206E/MAX207E/MAX208E/MAX211E/MAX213E operate with four 0.1µF capacitors,further reducing cost and board space.________________________ApplicationsNotebook, Subnotebook, and Palmtop Computers Battery-Powered Equipment Hand-Held EquipmentNext-Generation Device Featureso For Low-Voltage ApplicationsMAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected Down to10nA, +3.0V to +5.5V, Up to 1Mbps, True RS-232Transceivers (MAX3246E Available in a UCSP™Package)o For Low-Power ApplicationsMAX3221/MAX3223/MAX3243: 1µA SupplyCurrent, True +3V to +5.5V RS-232 Transceivers with Auto-Shutdown™o For Space-Constrained ApplicationsMAX3233E/MAX3235E: ±15kV ESD-Protected,1µA, 250kbps, +3.0V/+5.5V, Dual RS-232Transceivers with Internal Capacitorso For Low-Voltage or Data Cable ApplicationsMAX3380E/MAX3381E: +2.35V to +5.5V, 1µA,2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic PinsMAX202E–MAX213E, MAX232E/MAX241E±15kV ESD-Protected, +5V RS-232 TransceiversSelector Guide19-0175; Rev 6; 3/05Pin Configurations and Typical Operating Circuits appear at end of data sheet.YesPARTNO. OF RS-232DRIVERSNO. OF RS-232RECEIVERSRECEIVERS ACTIVE IN SHUTDOWNNO. OF EXTERNAL CAPACITORS(µF)LOW-POWER SHUTDOWNTTL TRI-STATE MAX202E 220 4 (0.1)No No MAX203E 220None No No MAX205E 550None Yes Yes MAX206E 430 4 (0.1)Yes Yes MAX207E 530 4 (0.1)No No MAX208E 440 4 (0.1)No No MAX211E 450 4 (0.1)Yes Yes MAX213E 452 4 (0.1)Yes Yes MAX232E 220 4 (1)No No MAX241E454 (1)YesFor pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at .AutoShutdown and UCSP are trademarks of Maxim Integrated Products, Inc.Ordering InformationOrdering Information continued at end of data sheet.2_______________________________________________________________________________________M A X 202E –M A X 213E , M A X 232E /M A X 241EABSOLUTE MAXIMUM RATINGSV CC ..........................................................................-0.3V to +6V V+................................................................(V CC - 0.3V) to +14V V-............................................................................-14V to +0.3V Input VoltagesT_IN............................................................-0.3V to (V+ + 0.3V)R_IN...................................................................................±30V Output VoltagesT_OUT.................................................(V- - 0.3V) to (V+ + 0.3V)R_OUT......................................................-0.3V to (V CC + 0.3V)Short-Circuit Duration, T_OUT....................................Continuous Continuous Power Dissipation (T A = +70°C)16-Pin Plastic DIP (derate 10.53mW/°C above +70°C)....842mW 16-Pin Narrow SO (derate 8.70mW/°C above +70°C).....696mW 16-Pin Wide SO (derate 9.52mW/°C above +70°C)......762mW 16-Pin TSSOP (derate 9.4mW/°C above +70°C)...........755mW20-Pin Plastic DIP (derate 11.11mW/°C above +70°C)...889mW 20-Pin SO (derate 10.00mW/°C above +70°C).............800mW 24-Pin Narrow Plastic DIP(derate 13.33mW/°C above +70°C) ...............................1.07W 24-Pin Wide Plastic DIP(derate 14.29mW/°C above +70°C)................................1.14W 24-Pin SO (derate 11.76mW/°C above +70°C).............941mW 24-Pin SSOP (derate 8.00mW/°C above +70°C)..........640mW 28-Pin SO (derate 12.50mW/°C above +70°C)....................1W 28-Pin SSOP (derate 9.52mW/°C above +70°C)..........762mW Operating Temperature RangesMAX2_ _EC_ _.....................................................0°C to +70°C MAX2_ _EE_ _...................................................-40°C to +85°C Storage Temperature Range.............................-65°C to +165°C Lead Temperature (soldering, 10s).................................+300°CELECTRICAL CHARACTERISTICS(V CC = +5V ±10% for MAX202E/206E/208E/211E/213E/232E/241E; V CC = +5V ±5% for MAX203E/205E/207E; C1–C4 = 0.1µF for MAX202E/206E/207E/208E/211E/213E; C1–C4 = 1µF for MAX232E/241E; T A = T MIN to T MAX ; unless otherwise noted. Typical values are at T A = +25°C.)Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.ELECTRICAL CHARACTERISTICS (continued)MAX202E–MAX213E, MAX232E/MAX241E (V CC= +5V ±10% for MAX202E/206E/208E/211E/213E/232E/241E; V CC= +5V ±5% for MAX203E/205E/207E; C1–C4 = 0.1µF forMAX202E/206E/207E/208E/211E/213E; C1–C4 = 1µF for MAX232E/241E; T A= T MIN to T MAX; unless otherwise noted. Typical valuesare at T A= +25°C.)Note 1:MAX211EE_ _ tested with V CC= +5V ±5%._______________________________________________________________________________________34______________________________________________________________________________________M A X 202E –M A X 213E , M A X 232E /M A X 241E__________________________________________Typical Operating Characteristics(Typical Operating Circuits, V CC = +5V, T A = +25°C, unless otherwise noted.)5.00MAX211E/MAX213ETRANSMITTER OUTPUT VOLTAGEvs. LOAD CAPACITANCELOAD CAPACITANCE (pF)V O H , -V O L (V )5.56.06.57.07.58.0100020003000400050000MAX211E/MAX213E/MAX241E TRANSMITTER SLEW RATE vs. LOAD CAPACITANCELOAD CAPACITANCE (pF)S L E W R A T E ( V /µs )5101520253010002000300040005000_______________________________________________________________________________________5MAX202E–MAX213E, MAX232E/MAX241E____________________________Typical Operating Characteristics (continued)(Typical Operating Circuits, V CC = +5V, T A = +25°C, unless otherwise noted.)2MAX202E/MAX203E/MAX232E TRANSMITTER SLEW RATE vs. LOAD CAPACITANCELOAD CAPACITANCE (pF)S L E W R A T E ( V /µs )468101214100020003000400050005.07.5-7.53000MAX205E–MAX208ETRANSMITTER OUTPUT VOLTAGEvs. LOAD CAPACITANCE-5.02.5LOAD CAPACITANCE (pF)O U T P U T V O L T A G E (V )10002000400050000-2.54550203000MAX205E–MAX208E SUPPLY CURRENT vs. LOAD CAPACITANCE2540LOAD CAPACITANCE (pF)S U P P L Y C U R R E N T (m A )100020004000500035302.55.0-10.0180MAX205E –MAX208EOUTPUT VOLTAGE vs. DATA RATE-7.50DATA RATE (kbps)O U T P U T V O L T A G E (V )601202401503090210-2.5-5.010.07.56_______________________________________________________________________________________M A X 202E –M A X 213E , M A X 232E /M A X 241EMAX203EMAX205E_____________________________________________________________Pin DescriptionsMAX202E/MAX232E_______________________________________________________________________________________7MAX202E–MAX213E, MAX232E/MAX241EMAX208E________________________________________________Pin Descriptions (continued)MAX206EMAX207E8_______________________________________________________________________________________M A X 202E –M A X 213E , M A X 232E /M A X 241EMAX211E/MAX213E/MAX241E)(MAX205E/MAX206E/MAX211E/MAX213E/MAX241E)________________________________________________Pin Descriptions (continued)MAX211E/MAX213E/MAX241EFigure 3. Transition Slew-Rate Circuit_______________Detailed Description The MAX202E–MAX213E, MAX232E/MAX241E consist of three sections: charge-pump voltage converters, drivers (transmitters), and receivers. These E versions provide extra protection against ESD. They survive ±15kV discharges to the RS-232 inputs and outputs, tested using the Human Body Model. When tested according to IEC1000-4-2, they survive ±8kV contact-discharges and ±15kV air-gap discharges. The rugged E versions are intended for use in harsh environments or applications where the RS-232 connection is frequently changed (such as notebook computers). The standard (non-“E”) MAX202, MAX203, MAX205–MAX208, MAX211, MAX213, MAX232, and MAX241 are recommended for applications where cost is critical.+5V to ±10V Dual Charge-PumpVoltage Converter The +5V to ±10V conversion is performed by dual charge-pump voltage converters (Figure 4). The first charge-pump converter uses capacitor C1 to double the +5V into +10V, storing the +10V on the output filter capacitor, C3. The second uses C2 to invert the +10V into -10V, storing the -10V on the V- output filter capacitor, C4.In shutdown mode, V+ is internally connected to V CC by a 1kΩpull-down resistor, and V- is internally connected to ground by a 1kΩpull up resistor.RS-232 Drivers With V CC= 5V, the typical driver output voltage swing is ±8V when loaded with a nominal 5kΩRS-232 receiver. The output swing is guaranteed to meet EIA/TIA-232E and V.28 specifications that call for ±5V minimum output levels under worst-case conditions. These include a 3kΩload, minimum V CC, and maximum operating temperature. The open-circuit output voltage swings from (V+ - 0.6V) to V-.Input thresholds are CMOS/TTL compatible. The unused drivers’ inputs on the MAX205E–MAX208E, MAX211E, MAX213E, and MAX241E can be left unconnected because 400kΩpull up resistors to V CC are included on-chip. Since all drivers invert, the pull up resistors force the unused drivers’ outputs low. The MAX202E, MAX203E, and MAX232E do not have pull up resistors on the transmitter inputs._______________________________________________________________________________________9MAX202E–MAX213E, MAX232E/MAX241E10______________________________________________________________________________________M A X 202E –M A X 213E , M A X 232E /M A X 241E±15kV ESD-Protected, +5V RS-232 Transceivers When in low-power shutdown mode, the MAX205E/MAX206E/MAX211E/MAX213E/MAX241E driver outputs are turned off and draw only leakage currents—even if they are back-driven with voltages between 0V and 12V. Below -0.5V in shutdown, the transmitter output is diode-clamped to ground with a 1k Ωseries impedance.RS-232 ReceiversThe receivers convert the RS-232 signals to CMOS-logic output levels. The guaranteed 0.8V and 2.4V receiver input thresholds are significantly tighter than the ±3V thresholds required by the EIA/TIA-232E specification.This allows the receiver inputs to respond to TTL/CMOS-logic levels, as well as RS-232 levels.The guaranteed 0.8V input low threshold ensures that receivers shorted to ground have a logic 1 output. The 5k Ωinput resistance to ground ensures that a receiver with its input left open will also have a logic 1 output. Receiver inputs have approximately 0.5V hysteresis.This provides clean output transitions, even with slow rise/fall-time signals with moderate amounts of noise and ringing.In shutdown, the MAX213E’s R4 and R5 receivers have no hysteresis.Shutdown and Enable Control (MAX205E/MAX206E/MAX211E/MAX213E/MAX241E)In shutdown mode, the charge pumps are turned off,V+ is pulled down to V CC , V- is pulled to ground, and the transmitter outputs are disabled. This reduces supply current typically to 1µA (15µA for the MAX213E).The time required to exit shutdown is under 1ms, as shown in Figure 5.ReceiversAll MAX213E receivers, except R4 and R5, are put into a high-impedance state in shutdown mode (see Tables 1a and 1b). The MAX213E’s R4 and R5 receivers still function in shutdown mode. These two awake-in-shutdown receivers can monitor external activity while maintaining minimal power consumption.The enable control is used to put the receiver outputs into a high-impedance state, to allow wire-OR connection of two EIA/TIA-232E ports (or ports of different types) at the UART. It has no effect on the RS-232 drivers or the charge pumps.N ote: The enabl e control pin is active l ow for the MAX211E/MAX241E (EN ), but is active high for the MAX213E (EN). The shutdown control pin is active high for the MAX205E/MAX206E/MAX211E/MAX241E (SHDN), but is active low for the MAX213E (SHDN ).Figure 4. Charge-Pump DiagramMAX202E–MAX213E, MAX232E/MAX241EV+V-200µs/div3V 0V 10V 5V 0V -5V -10VSHDNMAX211EFigure 5. MAX211E V+ and V- when Exiting Shutdown (0.1µF capacitors)X = Don't care.*Active = active with reduced performanceSHDN E N OPERATION STATUS Tx Rx 00Normal Operation All Active All Active 01Normal Operation All Active All High-Z 1XShutdownAll High-ZAll High-ZTable 1a. MAX205E/MAX206E/MAX211E/MAX241E Control Pin ConfigurationsTable 1b. MAX213E Control Pin ConfigurationsThe MAX213E’s receiver propagation delay is typically 0.5µs in normal operation. In shutdown mode,propagation delay increases to 4µs for both rising and falling transitions. The MAX213E’s receiver inputs have approximately 0.5V hysteresis, except in shutdown,when receivers R4 and R5 have no hysteresis.When entering shutdown with receivers active, R4 and R5 are not valid until 80µs after SHDN is driven low.When coming out of shutdown, all receiver outputs are invalid until the charge pumps reach nominal voltage levels (less than 2ms when using 0.1µF capacitors).±15kV ESD ProtectionAs with all Maxim devices, ESD-protection structures are incorporated on all pins to protect against electrostatic discharges encountered during handling and assembly. The driver outputs and receiver inputs have extra protection against static electricity. Maxim’s engineers developed state-of-the-art structures to protect these pins against ESD of ±15kV without damage. The ESD structures withstand high ESD in all states: normal operation, shutdown, and powered down. After an ESD event, Maxim’s E versions keep working without latchup, whereas competing RS-232products can latch and must be powered down to remove latchup.ESD protection can be tested in various ways; the transmitter outputs and receiver inputs of this product family are characterized for protection to the following limits:1)±15kV using the Human Body Model2)±8kV using the contact-discharge method specifiedin IEC1000-4-23)±15kV using IEC1000-4-2’s air-gap method.ESD Test ConditionsESD performance depends on a variety of conditions.Contact Maxim for a reliability report that documents test set-up, test methodology, and test results.Human Body ModelFigure 6a shows the Human Body Model, and Figure 6b shows the current waveform it generates when discharged into a low impedance. This model consists of a 100pF capacitor charged to the ESD voltage of interest, which is then discharged into the test device through a 1.5k Ωresistor.S H D N ENOPERATION STATUS Tx 1–400Shutdown All High-Z 01Shutdown All High-Z 10Normal Operation 11Normal OperationAll ActiveAll Active Active1–34, 5High-Z ActiveHigh-Z High-Z High-Z Active*High-Z RxM A X 202E –M A X 213E , M A X 232E /M A X 241EIEC1000-4-2The IEC1000-4-2 standard covers ESD testing and performance of finished equipment; it does not specifically refer to integrated circuits. The MAX202E/MAX203E–MAX213E, MAX232E/MAX241E help you design equipment that meets level 4 (the highest level) of IEC1000-4-2, without the need for additional ESD-protection components.The major difference between tests done using the Human Body Model and IEC1000-4-2 is higher peak current in IEC1000-4-2, because series resistance is lower in the IEC1000-4-2 model. Hence, the ESD withstand voltage measured to IEC1000-4-2 is generally lower than that measured using the Human Body Model. Figure 7b shows the current waveform for the 8kV IEC1000-4-2 level-four ESD contact-discharge test.The air-gap test involves approaching the device with a charged probe. The contact-discharge method connects the probe to the device before the probe is energized.Machine ModelThe Machine Model for ESD tests all pins using a 200pF storage capacitor and zero discharge resistance. Its objective is to emulate the stress caused by contact that occurs with handling and assembly during manufacturing. Of course, all pins require this protection during manufacturing, not just RS-232 inputs and outputs. Therefore,after PC board assembly,theMachine Model is less relevant to I/O ports.Figure 7a. IEC1000-4-2 ESD Test ModelFigure 7b. IEC1000-4-2 ESD Generator Current WaveformFigure 6a. Human Body ESD Test ModelFigure 6b. Human Body Model Current Waveform__________Applications InformationCapacitor Selection The capacitor type used for C1–C4 is not critical for proper operation. The MAX202E, MAX206–MAX208E, MAX211E, and MAX213E require 0.1µF capacitors, and the MAX232E and MAX241E require 1µF capacitors, although in all cases capacitors up to 10µF can be used without harm. Ceramic, aluminum-electrolytic, or tantalum capacitors are suggested for the 1µF capacitors, and ceramic dielectrics are suggested for the 0.1µF capacitors. When using the minimum recommended capacitor values, make sure the capacitance value does not degrade excessively as the operating temperature varies. If in doubt, use capacitors with a larger (e.g., 2x) nominal value. The capacitors’ effective series resistance (ESR), which usually rises at low temperatures, influences the amount of ripple on V+ and V-.Use larger capacitors (up to 10µF) to reduce the output impedance at V+ and V-. This can be useful when “stealing” power from V+ or from V-. The MAX203E and MAX205E have internal charge-pump capacitors. Bypass V CC to ground with at least 0.1µF. In applications sensitive to power-supply noise generated by the charge pumps, decouple V CC to ground with a capacitor the same size as (or larger than) the charge-pump capacitors (C1–C4).V+ and V- as Power Supplies A small amount of power can be drawn from V+ and V-, although this will reduce both driver output swing and noise margins. Increasing the value of the charge-pump capacitors (up to 10µF) helps maintain performance when power is drawn from V+ or V-.Driving Multiple Receivers Each transmitter is designed to drive a single receiver. Transmitters can be paralleled to drive multiple receivers.Driver Outputs when Exiting Shutdown The driver outputs display no ringing or undesirable transients as they come out of shutdown.High Data Rates These transceivers maintain the RS-232 ±5.0V minimum driver output voltages at data rates of over 120kbps. For data rates above 120kbps, refer to the Transmitter Output Voltage vs. Load Capacitance graphs in the Typical Operating Characteristics. Communication at these high rates is easier if the capacitive loads on the transmitters are small; i.e., short cables are best.Table 2. Summary of EIA/TIA-232E, V.28 SpecificationsMAX202E–MAX213E, MAX232E/MAX241EM A X 202E –M A X 213E , M A X 232E /M A X 241E____________Pin Configurations and Typical Operating Circuits (continued)Table 3. DB9 Cable ConnectionsCommonly Used for EIA/TIAE-232E and V.24 Asynchronous Interfaces____________Pin Configurations and Typical Operating Circuits (continued)MAX202E–MAX213E, MAX232E/MAX241EM A X 202E –M A X 213E , M A X 232E /M A X 241E____________Pin Configurations and Typical Operating Circuits (continued)MAX202E–MAX213E, MAX232E/MAX241E____________Pin Configurations and Typical Operating Circuits (continued)M A X 202E –M A X 213E , M A X 232E /M A X 241E____________Pin Configurations and Typical Operating Circuits (continued)MAX202E–MAX213E, MAX232E/MAX241E____________Pin Configurations and Typical Operating Circuits (continued)M A X 202E –M A X 213E , M A X 232E /M A X 241E____________Pin Configurations and Typical Operating Circuits (continued)______________________________________________________________________________________21MAX202E–MAX213E, MAX232E/MAX241E Ordering Information (continued)*Dice are specified at T A= +25°C.M A X 202E –M A X 213E , M A X 232E /M A X 241E22________________________________________________________________________________________________________________________________________________Chip Topographies___________________Chip InformationC1-V+C1+V CC R2INT2OUT R2OUT0.117"(2.972mm)0.080"(2.032mm)V-C2+ C2-T2IN T1OUT R1INR1OUT T1INGNDR5INV-C2-C2+C1-V+C1+V CC T4OUTR3IN T3OUTT1OUT 0.174"(4.420mm)0.188"(4.775mm)T4IN R5OUT R4OUT T3IN R4IN EN (EN) SHDN (SHDN)R3OUT T2OUT GNDR1IN R1OUT T2IN R2OUTR2IN T1IN ( ) ARE FOR MAX213E ONLYTRANSISTOR COUNT: 123SUBSTRATE CONNECTED TO GNDTRANSISTOR COUNT: 542SUBSTRATE CONNECTED TO GNDMAX202E/MAX232EMAX211E/MAX213E/MAX241EMAX205E/MAX206E/MAX207E/MAX208E TRANSISTOR COUNT: 328SUBSTRATE CONNECTED TO GNDMAX202E–MAX213E, MAX232E/MAX241E Package InformationM A X 202E –M A X 213E , M A X 232E /M A X 241EPackage Information (continued)MAX202E–MAX213E, MAX232E/MAX241E±15kV ESD-Protected, +5V RS-232 TransceiversMaxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________25©2005 Maxim Integrated ProductsPrinted USAis a registered trademark of Maxim Integrated Products, Inc.Package Information (continued)(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to /packages .)。
207控制板简化规格书
热敏打印机控制板规格参考手册2011 年10 月产品概述该手册适用于RTP-1000型号的热敏打印机的印刷控制电路板，给电路板具有如下特性：1.型号·标准型：仅支持英数字符。
·汉字型：支持英数字符和汉字字符。
2.汉字型字库·简体中文：支持GB2312-80。
3.可连接的打印机·可驱动M-T207A打印机头。
·高速打印：100 毫米/秒(3.9英寸/秒)进纸，打印16×16字型,优化控制，最大大约达到33行每秒（lps）。
4.应用软件·基于ESC/POS®标准的命令协议。
·可以将字符放大到标准尺寸的64倍·可以使用条形码打印命令打印条形码。
·使用宏定义可以实现重复操作和复制打印。
·可以使用命令选择字型尺寸(16×16或24×24)。
·可以打印位图。
5.硬件配置·一个内置的并行接口(IEEE 1284)。
·一个内置的串行接口(RS-232)。
6.特别声明·环境指标·产品存储期间，应装入防静电袋中，或加装导电海绵，以保护设备。
·不得在高湿或高粉尘的环境下使用该产品，以防产品损坏、失火或打火。
·通电前确认使用的连接线缆和接线端口连接良好，以防产品损坏。
·如长时间不使用该产品，请拔下该产品的插头，以保证安全。
目录1产品规格 (1)1.1打印规格 (1)1.2字符规格 (1)1.3接收缓冲区 (2)1.4环境条件 (2)2配置 (2)2.1接口 (2)2.1.1RS-232 串行接口 (2)2.1.2IEEE 1284 单向并行接口 (4)3功能 (7)3.1命令列表 (7)3.1.1面板按键 (9)3.1.2拨动开关 (9)3.2LED 指示灯 (9)3.3自检 (10)3.4打印纸传感器 (10)3.5盖板打开传感器 (10)4外部规格 (11)4.1尺寸和重量 (11)4.2外观 (11)5命令 ...................................................................................................................... 错误！未定义书签。
Arc Machines, Inc. Model 207 微处理器控制电源供电设备说明说明书
MODEL 207MICROPROCESSORCONTROLLEDPOWER SUPPLYThe Arc Machines, Inc. Model 207 is a 100 / 150 amppre-programmed / programmable power supply and controller capable of welding tubing and thin wall pipe. Welds produced by this machine meet or exceed the specifications required by industries as diverse as: semiconductor, food, dairy, pharmaceutical, aerospace, heat exchanger and nuclear.welding schedulesmay be stored in itsmemory for rapidaccess. High-integrity,sanitary welds arethe touch of a button.features and benefitsinclude:Ease of operation. Standard software prompts the operatorin English, Spanish, French, German, Norwegian, Swedishand Japanese.Key switch locks out unauthorized personnel.Weld program transfer capability for multiple-system jobsites.Control panel features soft-touch membrane switches, whichare dust / moisture proof and accepted for cleanroom use. Compatible with all Arc Machines’ orbital fusion weld heads including the high production bench-top Model 4, the familyof Models 8 and 9, the (tube-to-tubesheet) Model 96, as well a fixtured machine torch or a manual torch for hand welding. Operates on any voltage from 100 to 240 VAC, single phase,50 / 60 Hz.Optional remote operator’s pendant allows welding function overrides and gives the operator access to any four predetermined welding schedules up to 100 feet from theModel 207.Only microprocessor-controlled power supply of its kind witha two year warranty.••••••••OPERATION IS AS SIMPLE AS …Two displays of useful information make operation a snap. The upper display prompts the user in plain language, so even a novice (either operating or programming) will feel comfortable right from the start. The lower display provides the operator with a block of information such as tube diameter, wall, material, etc. The programmed values of 8 different multi-level parameters are also clearly displayed on this screen. Special functions in the standard software include automatic IPM / RPM conversions and tungsten length calculations.SELECTIVE OPERATOR CONTROLSDuring initial programming, software prompts allow the programmer to provide the user with manual overrides. These overrides give the user the freedom to modify the programmed weld schedule to suit his welding needs. The programmer has the option to limit the percentage of override capability of the operator from 0 to 100% of the programmed setting, on all multi-level functions. The three position key switch enables the key holder to give varied levels of operating or programming capability to the user. The key may be removed in any of the three modes.Q.C. - HOW EASY CAN IT BE?Each time the unit is powered up, the Diagnostic Fault Detection System (DFDS) automatically checks the status of five internal functions, including gas flow and input power. Three external interlock sensors may be added to the DFDS. The built-in printer provides a hard copy paper trail of the program library and individual weld schedule parameters. To further enhance Q.C., each successive weld with no DFDS faults may be followed by a printout of the welding parameters and the statement “ALL PARAMETERS PERFORMED AS PROGRAMMED.” In the case of a fault, the nature of the fault will be printed out, and must be corrected before another weld can be started. Features like these bring welding Q.C. to a level never before achievable.INTERNAL PRINTERPrints an array of information including programlibrary, weld schedule settings, quantity ofcompleted welds, and valuable Q.C. data linkedto the Diagnostic Fault Detection System. KEY SWITCHLocks out or limits operator access orprogramming capability. May beremoved in any of three modes.EXTERNAL MEMORY PORTUsed with the (optional) External MemoryModule (207-EMM) for additional memorystorage or data transfer from one machineto another.UPPER DISPLAYProvides prompts for the operator inplain language, making welding orprogramming simple for anyone.LOWER DISPLAYProvides all welding data information,program library readout and numerousother functions such as DiagnosticFault Detection System (DFDS), andSystem Interlock status.CONTROL PANELSoft touch membrane switches are dust / moisture proof and accepted for cleanroom use, as well as being ideal for harsh environments.INTERNAL MEMORYThe internal memory is pre-programmed with weld schedules for most standard applications, and canstore up to 100 different weld schedules.External Memory ModuleRemote Operator’s Pendant Unitized Water Cooling Unit Reusable Shipping CaseManual Torch and Foot ControlTechnical DataSpecifications subject to change without notice.Complies with all applicable international norms and directives, including: IEC 974-1; ISO/DIS 700; EN 50199; EN 60974-1; NEMA EW-1.HEADQUARTERS • Arc Machines, Inc. • 10500 Orbital Way, Pacoima, CA 91331 U.S.A. • Tel: 1-818-896-9556 • Fax: 1-818-890-3724EUROPEAN OFFICE • Arc Machines, Inc. • Chemin du Lavasson 2, CH-1196 Gland, Switzerland • Tel: +41 / 22 / 995.00.51 • Fax: +41 / 22 / 995.00.59GERMAN OFFICE • Arc Machines GmbH • Markelsbach 2 • D-53804 Much, Germany • Tel: 02245 / 91680 • Fax: 02245 / 916868UK OFFICE • Arc Machines UK Limited • 10 Ashurst Court, London Road, Wheatley, Oxford, UK, OX331ER • Tel: 01865 / 872121 • Fax: 01865 / 876909*********************MKT 207 PS - ACC / SEPTEMBER, 2009 / EAMI is an ISO Certified Company®While the basic Model 207 and an appropiate weld head are all that you need to weld tube or fittings, many desirable options are available:CLEANROOM VERSIONTHE MODEL 207-HP is similar to the Model 207, except that it is designed specifically for use in cleanrooms and other areas where particulate shedding is of concern.See Arc Machines, Inc. Model 207-HP brochure for more information.Additional accessories available, but not shown include:• Remote Pendant Extension Cables • Weld HeadExtension Cables • Chart Recorder Interface Cable• Offline ProgrammingMulti-level Functions: Primary Amps, Background Amps Primary RPM, Background RPM Primary pulse rate Background pulse rateCurrent Mode (pulse, on / off) Rotation Mode (on / off / step)Memory Capacity: Up to 100 weld schedules Up to 100 levels per schedule Dimensions: Height: 11.00” (20 cm)Width: 22.75” (58 cm)Depth: 18.75” (48 cm)Welding Process: GTAW (TIG)Arc Start System: Injection Pulse StartCurrent Pulse Rate: 0.05 to 50 PPSOverrides: Current, RPM and Pulse Rate: ± 100% Input Power: 100 to 240 VAC, ± 10% Single phase, 50 / 60 Hz.Output Power: 3 to 100 / 150 amps DCSP,± 0.5%, 100% Duty CycleEnclosure: All metal, self-containedWeight: 79 lbs. (36 Kg)。
各厂家IC封装命名规则
各国品牌IC封装及命名规则DIP英文简称:DIP英文全称：Double In-line Package中文解释：双列直插式封装。
插装型封装之一，引脚从封装两侧引出，封装材料有塑料和陶瓷两种。
DIP是最普及的插装型封装，应用范围包括标准逻辑IC，存贮器LSI，微机电路等。
PLCC英文简称:PLCC英文全称:Plastic Leaded Chip Carrier中文解释:PLCC封装方式，外形呈正方形，32脚封装，四周都有管脚，外形尺寸比DIP封装小得多。
PLCC封装适合用SMT表面安装技术在PCB上安装布线，具有外形尺寸小、可靠性高的优点。
PQFP英文简称:PQFP英文全称:Plastic Quad Flat Package中文解释: PQFP封装的芯片引脚之间距离很小，管脚很细，一般大规模或超大规模集成电路采用这种封装形式，其引脚数一般都在100以上。
SOP英文简称:SOP英文全称:Small Outline Package中文解释: 1968～1969年菲为浦公司就开发出小外形封装（SOP）。
以后逐渐派生出SOJ（J型引脚小外形封装）、TSOP（薄小外形封装）、VSOP（甚小外形封装）、SSOP（缩小型SOP）、TSSOP（薄的缩小型SOP）及SOT（小外形晶体管）、SOIC（小外形集成电路）等。
IC 封装及命名规则---TI逻辑器件的产品名称器件命名规则SN 74 LVC H 16 2 244 A DGG R1 2 3 4 5 6 7 8 9 101. 标准前缀示例：SNJ -- 遵从MIL-PRF-38535 (QML)2. 温度范围54 -- 军事74 -- 商业3. 系列4. 特殊功能空= 无特殊功能C -- 可配置Vcc (LVCC)D -- 电平转换二极管(CBTD)H -- 总线保持(ALVCH)K -- 下冲-保护电路(CBTK)R -- 输入/输出阻尼电阻(LVCR)S -- 肖特基钳位二极管(CBTS)Z -- 上电三态(LVCZ)5. 位宽空= 门、MSI 和八进制1G -- 单门8 -- 八进制IEEE 1149.1 (JTAG)16 -- Widebus™（16 位、18 位和20 位）18 -- Widebus IEEE 1149.1 (JTAG)32 -- Widebus™（32 位和36 位）6. 选项空= 无选项2 -- 输出串联阻尼电阻4 -- 电平转换器25 -- 25 欧姆线路驱动器7. 功能244 -- 非反向缓冲器/驱动器374 -- D 类正反器573 -- D 类透明锁扣640 -- 反向收发器8. 器件修正空= 无修正字母指示项A-Z9. 封装D, DW -- 小型集成电路(SOIC)DB, DL -- 紧缩小型封装(SSOP)DBB, DGV -- 薄型超小外形封装(TVSOP)DBQ -- 四分之一小型封装(QSOP)DBV, DCK -- 小型晶体管封装(SOT)DGG, PW -- 薄型紧缩小型封装(TSSOP)FK -- 陶瓷无引线芯片载体(LCCC)FN -- 塑料引线芯片载体(PLCC)GB -- 陶瓷针型栅阵列(CPGA)GKE, GKF -- MicroS tar™ BGA 低截面球栅阵列封装(LFBGA)GQL, GQN -- MicroStar Junior BGA 超微细球栅阵列(VFBGA)HFP, HS, HT, HV -- 陶瓷四方扁平封装(CQFP)J, JT -- 陶瓷双列直插式封装(CDIP)N, NP, NT -- 塑料双列直插式封装(PDIP)NS, PS -- 小型封装(SOP)PAG, PAH, PCA, PCB, PM, PN, PZ -- 超薄四方扁平封装(TQFP)PH, PQ, RC -- 四方扁平封装(QFP)W, WA, WD -- 陶瓷扁平封装(CFP)10. 卷带封装DB 和PW 封装类型中的所有新增器件或更换器件的名称包括为卷带产品指定的R。
SW-207中文资料
Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America: Tel. (800) 366-2266 Fax (800) 618-8883
s
1
Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451
(From -55°C to +85°C) 5 - 3000 MHz 5 - 3000 MHz 5 - 2000 MHz 5 - 1000 MHz 2.3 dB Max. 1.4 dB Max. 1.0 dB Max. 2.5:1 Max. 1.7:1 Max. 1.5:1 Max. 18 dB Min. 28 dB Min. 38 dB Min.
元器件交易网
GaAs SPDT Switch 5 - 3000 MHz
Features
q q q q q
SW-207
V2.00
DI-1
CTL
0.87 (22.1 0.5)
RF IN
Low Insertion Loss: 1.0 dB Typ. Fast Switching Speed Low DC Power Consumption Integral TTL MIL-STD-883 Screening Available
Schematic
Truth Table
Specifications Subject to Change Without Notice.
MEMORY存储芯片RU207C中文规格书
O u t p u t P o w e r (%)100602040Operating Temperature °C80Selection GuidePart Input Output Output Efficiency Max Number Voltage Voltage Current Capacitive SMD (3kV)(VDC)(VDC)(mA)(%)Load (1)R1S**-xx3.3(H) 3.3, 5, 12, 15, 24 3.3303752200µF R1S**-xx05(H) 3.3, 5, 12, 15, 24520072-781000µF R1S**-xx09(H) 3.3, 5, 12, 15, 24911174-781000µF R1S**-xx12(H) 3.3, 5, 12, 15, 24128475-80470µF R1S**-xx15(H) 3.3, 5, 12, 15, 24156675-82470µF R1S**-xx24(H) 3.3, 5, 12, 15, 24244274-84220µF R1D**-xx3.3(H) 3.3, 5, 12, 15, 24±3.3±15275±1000µF R1D**-xx05(H) 3.3, 5, 12, 15, 24±5±10072-78±470µF R1D**-xx09(H) 3.3, 5, 12, 15, 24±9±5674-78±470µF R1D**-xx12(H) 3.3, 5, 12, 15, 24±12±4275-80±220µF R1D**-xx15(H) 3.3, 5, 12, 15, 24±15±3375-82±220µF R1D**-xx24(H)3.3, 5, 12, 15, 24±24±2174-84±100µFSpecifications (measured at T A = 25°C, nominal input voltage, full load and after warm-up)Input Voltage Range ±10%Output Voltage Accuracy ±2% typ., ±5% max.Line Voltage Regulation All Variants 1.2%/1% of Vin typ.Load Voltage Regulation 3.3V output types 15% typ., 20% max.(10% to 100% full load)5V output type 12% typ., 15% max.9V output type7% typ., 10% max.12V, 15V, 24V output types6% typ., 10% max.1 Watt SMD Single &Dual Output●Fully RoHS 6/6 Conform●Full Power at 100°C Ambient T emperature ●1kVDC or 3kVDC Isolation Options ●UL /CSA Certified, CB Report●Suitable for Fully Automated Assembly (including Vapor Phase Soldering)●Optional Continuous Short Circuit Protection ●Efficiency to 84%●Built-In EN55022 Class A FilterFeaturesUnregulated ConvertersR1S** :** without marking denotes 5 pins out of 8 fitted (includes /H option)** with marking 8denotes 8 pins out of 8 fitted (/H option not available)** with marking 12denotes 10 pins out of 12 fitted (includes /H option)R1D** :** without marking denotes 6 pins out of 10 fitted (includes /H option)** with marking 10denotes with 10 pins out of 10 fitted (/H option not available)** with marking 12denotes 10 pins out of 12 fitted (includes /H option)UL-60950-1 Certified EN-60950-1 Certified EN-60601-1 Certified*(*/H suffix)Case and Pinning Options (note restrictions on /H option)xx = Input Voltage (other input and output voltage combinations available on request)* add Suffix “H” for 3kV Isolation, e.g.R1S-0505/H, R1D-0505/H , R1S12-0505/H, R1D12-0505/H * add Suffix “P” for Continuous Short Circuit Protection, e.g.R1S8-0505/P , R1S-0505/H P , R1D12-0505/HP * add suffix -R for tape & reel packing e.g. R1S-0505-R.For more details see Application Notes.R1S_R1DECONOLINEDC/DC-Converterwith 3 year WarrantyDescriptionThe R1S and R1D converters are of the enclosed open frame type, i.e. they are not potted.The converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an SMD converter is required.The converter series feature an extended ambient temperature operating range of -40°C to +100°C without derating and optional continuous short circuit protection.In addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines.E358085RoHS2011/65/EU6/6Derating-Graph(Ambient T emperature)Efficiency at Full Load See Selection GuideMinimum Load = 0%Specifications valid for 10% minimum load only.Isolation Voltage (tested for 1 second)1000VDC (rated for 1 minute***)500VAC / 60HzIsolation Voltage H-Suffix (tested for 1 second)3000VDC H-Suffix(rated for 1 minute***)1500VAC / 60Hz Isolation CapacitanceR1S, R1S8, R1D, R1D1015pF min. / 70pF max.R1S12, R1D1210pF min. / 75pF max.Isolation Resistance 10 G Ωmin.Short Circuit Protection 1 Second P-SuffixContinuousOperating Temperature Range (free air convection)-40°C to +100°C (see Graph)Storage Temperature Range -55°C to +125°CReflow Temperature ROHS compliant 245°C (30 sec), Peak 255°C (5 sec) max.Vapor Phase Process (for more details see Application Notes)230°C (90 sec) max.Relative Humidity95% RHHumidity Susceptibility Test 1000 hrs / 90% humidity / +85°C ambientPackage weight R1S1.0g R1S81.1g R1S12, R1D, R1D10, R1D121.2gPacking Quantity R1S, R1S840 pcs per Tube R1S12, R1D, R1D10, R1D1233 pcs per tube All Types500 pcs per Reel MTBF (+25°C)using MIL-HDBK 217F 4275 x 103 hours (+85°C)using MIL-HDBK 217F1365 x 103 hoursCertifications CB Test Report Report: US/14402A/UL IEC 60950-1:2001 1st Ed.UL General Safety Report: E358085UL 60950-1 2nd Ed.CUL General Safety C22.2 No. 60950-1-03EN Medical Safety Report: MDD1205098-2 + RM1205098-2IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk AssessmentEN General Safety Report: SPCLVD1211033-3EN60950-1: 2006 + A12:2011Conducted / Radiated Emissions EN55022Level ADC/DC-ConverterSpecifications (measured at T A = 25°C, nominal input voltage, full load and after warm-up)E f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000R1S**-xx05}Detailed Information seeApplication Notes chapter "MTBF"Typical Characteristics+10%+5%V Nom.+5% 1%10%50%100%O u t p u t V o l t a g eOutput Load Current (%)5%T y p i c a l Loa d L i neTolerance EnvelopeE f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)Deviation / Load-10.00040%0%100%D e v i a ti o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000R1D**-xx05***Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes.NotesNote 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.Package Style and Pinning (mm)R1S** :** without marking denotes 5 pins out of 8 fitted (includes /H option)e.g. R1S-0505, R1S-0505/H, R1S-0505/HP ** with marking 8 denotes 8 pins out of 8 fitted (/H option not available) e.g. R1S8-0505, R1S8-0505/PR1D** :** without marking denotes 6 pins out of 10 fitted (includes /H option)e.g. R1D-0505, R1D-0505/H, R1D-0505/HP ** with marking 10denotes with 10 pins out of 10 fitted (/H option not available)e.g. R1D10-0505, R1D10-0505/P5 PIN Single SMD Package6 PIN Dual SMD PackagePin ConnectionsPin #Single Dual 1–Vin –Vin 2+Vin +Vin 4–Vout Com 5+Vout –Vout 7No Pin +Vout 8NCNo Pin 10No PinNCNC = No ConnectionXX.X ± 0.5 mm XX.XX ± 0.25 mmRecommended Footprint DetailsRecommended Footprint DetailsNote: /H option is available inthese pin packages8 PIN Single SMD Package10 PIN Dual SMD PackagePin Connections Pin #Single Dual 1–Vin –Vin 2+Vin +Vin 3NC NC 4–Vout Com 5+Vout –Vout 6NC NC 7NC +Vout 8NC NC 9-NC 10-NCNC = No Connection Recommended Footprint DetailsRecommended Footprint DetailsNote: /H option is not available inthese pin packagesXX.X ± 0.5 mm XX.XX ± 0.25 mmR 1S -R 1DPackage Style and Pinning (mm)12 PIN Single and Dual SMD PackageSeparation 1Pin ConnectionsPin #Single Dual 1–Vin –Vin 2+Vin +Vin 3NC NC 5–Vout Com 6NC –Vout 7NC NC 8+Vout +Vout 10NC NC 11NC NC 12NCNCNC = No ConnectionRecommended Footprint DetailsNote: /H option is available inthis pin packageEMC Filtering - Suggestion for EN55022 Class B (Conducted and Emitted)XX.X ± 0.5 mm XX.XX ± 0.25 mmR1S-R1DR1S** :** with marking 12denotes 10 pins out of 12 fitted (includes /H option) e.g. R1S12-0505, R1S12-0505/H, R1S12-0505/HP R1D** :** with marking 12denotes 10 pins out of 12 fitted (includes /H option) e.g. R1D12-0505, R1D12-0505/H, R1D12-0505/HPStandard and /H versions C1L1Vin 4.7µF 3.3µH 3.3V 2.2µF 4.7µH 5V 2.2µF 10µH 12V 2.2µF 22µH 15V 4.7µF 22µH 24V/P and /HP versions C1L1Vin 4.7µF 10µH 3.3V 10µF 10µH 5V 4.7µF 22µH 12V 4.7µF 22µH 15V 10µF 47µH 24VC1 = MLCCL1 = SMD InductorMouser Electronics Authorized Distributor。
dw207 读写器说明书
dw207 读写器说明书
《DW207 读写器说明书》是一本由DW207公司出版的读写器说明书，主要介绍了
DW207读写器的使用方法和功能。
DW207读写器是一款高性能的读写器，可以支持多种类型的存储卡，包括SD卡、CF卡、MMC卡、MS卡、SM卡等。
它具有高速读写能力，可以快速读取和写入存储卡中的数据，极大地提高了工作效率。
此外，DW207读写器还具有安全性能，可以有效防止数据泄露，保护用户的隐私安全。
它还支持多种操作系统，可以在Windows、Mac OS、Linux等操作系统上使用，使用起来
非常方便。
DW207读写器还具有节能环保的特点，可以有效减少能耗，节约能源，保护环境。
总之，DW207读写器是一款高性能、安全、节能环保的读写器，可以满足用户的不同需求，是一款非常实用的产品。
MAX197BCNI中文资料
HBEN 5 SHDN 6 D7 7 D6 8 D5 9 D4 10 D3/D11 11 D2/D10 12 D1/D9 13 D0/D8 14
MAX197
24 INT 23 CH7 22 CH6 21 CH5 20 CH4 19 CH3 18 CH2 17 CH1 16 CH0 15 AGND
Functional Diagram appears at end of data sheet.
The MAX197 multi-range, 12-bit data-acquisition system (DAS) requires only a single +5V supply for operation, yet accepts signals at its analog inputs that may span both above the power-supply rail and below ground. This system provides 8 analog input channels that are independently software programmable for a variety of ranges: ±10V, ±5V, 0V to +10V, or 0V to +5V. This increases effective dynamic range to 14 bits, and provides the user flexibility to interface 4mA-to-20mA, ±12V, and ±15V powered sensors to a single +5V system. In addition, the converter is overvoltage tolerant to ±16.5V; a fault condition on any channel does not affect the conversion result of the selected channel. Other features include a 5MHz bandwidth track/hold, a 100ksps throughput rate, software-selectable internal or external clock and acquisition, 8+4 parallel interface, and an internal 4.096V or an external reference. A hardware SHDN pin and two programmable powerdown modes (STBYPD, FULLPD) are provided for lowcurrent shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays. The MAX197 employs a standard microprocessor (µP) interface. A three-state data I/O port is configured to operate with 8-bit data buses, and data-access and bus-release timing specifications are compatible with most popular µPs. All logic inputs and outputs are TTL/CMOS compatible. The MAX197 is available in 28-pin DIP, wide SO, SSOP, and ceramic SB packages. For a different combination of ranges (±4V, ±2V, 0V to 4V, 0V to 2V), refer to the MAX199 data sheet. For 12-bit bus interface, refer to the MAX196 and MAX198 data sheets.
MAX207EWG-T中文资料
General DescriptionThe MAX200–MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication inter-faces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V need-ed for RS-232 output levels. The MAX201 and MAX209operate from +5V and +12V, and contain a +12V to -12V charge-pump voltage converter.The MAX200–MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The 5µW shutdown mode of the MAX200, MAX205,MAX206, and MAX211 conserves energy in battery-powered systems. The MAX213 has an active-low shut-down and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indica-tor (RI) to be monitored easily using only 75µW power.The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now avail-able in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components,and are recommended for applications with limited circuit board space.ApplicationsComputersLaptops, Palmtops, Notebooks Battery-Powered Equipment Hand-Held Equipment Next-Generation Device Features ♦For Low-Cost Applications:MAX221E: ±15kV ESD-Protected, +5V, 1µA, Single RS-232 Transceiver with AutoShutdown™♦For Low-Voltage and Space-Constrained Applications:MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA,+3.0V to +5.5V, Up to 1Mbps, True RS-232Transceivers (MAX3246E Available in UCSP™Package)♦For Space-Constrained Applications:MAX3228E/MAX3229E: ±15kV ESD-Protected,+2.5V to +5.5V, RS-232 Transceivers in UCSP ♦For Low-Voltage or Data Cable Applications:MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA,2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins ♦For Low-Power Applications:MAX3224E–MAX3227E/MAX3244E/MAX3245E:±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to+5.5V, RS-232 Transceivers with AutoShutdown Plus™MAX200–MAX211/MAX213+5V , RS-232 Transceivers with 0.1µF External Capacitors ________________________________________________________________Maxim Integrated Products 119-0065; Rev 6; 10/03For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at .Ordering Information appears at end of data sheetAutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc.MAX200–MAX211/MAX213+5V , RS-232 Transceiverswith 0.1µF External Capacitors______________________________________________________________________________________19Ordering Information*Contact factory for dice specifications.M A X 200–M A X 211/M A X 213+5V , RS-232 Transceiverswith 0.1µF External Capacitors Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.20____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600©2003 Maxim Integrated ProductsPrinted USAis a registered trademark of Maxim Integrated Products.Package Information(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to /packages .)。
Pelco C20-DW系列数字日间夜间宽动态范围CCD摄像机说明书
C3906 / REVISED 6-15-12International Standards Organization Registered Firm;ISO 9001 Quality SystemC20-DW Series Analog Day/Night WDR Camera1/3-INCH CCD, 650 TVL WITH HIGH SENSITIVITY, TRUE DAY/NIGHT (ICR), WDR Product Features•Wide Dynamic Range •650 TV Lines •High Sensitivity•Day/Night with Automatic or Manual Control •1/3-Inch Format CCD Imager •Digital Signal Processing •CS Lens Mount•Autosensing DC Drive Auto Iris•Automatic/Manual White Balance Settings for Difficult Lighting Situations •Selectable Automatic Gain Control •Advanced Backlight Compensation•Autosensing Power (24 VAC/12 VDC with Selectable AC Line Lock/Internal Synchronization)•3D Digital Noise Reduction (DNR)•Privacy Zones•Built-in Unshielded Twisted Pair (UTP) Output •Motion Detection •Camera Titles•Built-in Coaxitron ®, RS-485 Pelco D ProtocolThe C20-DW Series is Pelco’s full-featured digital day/night wide dynamic range (WDR) CCD camera. Its WDR technology provides 120dB dynamic range and produces superior images over a range of lighting conditions, including extreme backlight conditions. Its day/night technology provides outstanding performance in low lighting conditions. The camera uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change and as the need for infrared sensitivity is realized.The C20-DW Series is an ultra high resolution digital camera with 650 TVL of resolution and 0.13 lux minimum illumination. Camera features include autosensing power (24 VAC or 12 VDC with AC line lock or internal synchronization) and automatic gain control (AGC).The C20-DW Series includes automatic white balance (AWB) for difficult lighting situations, digital noise reduction, and backlight compensation (BLC) that adjusts the picture to prevent objects from appearing dark due to a strong backlight. The C20-DW Series also uses slow electronic shutter technology to improve the illumination performance for low-light environments.The C20-DW Series has built-in analytical capabilities including privacy zones, motion detection, and camera titles that add to its functionality. These fine-tuning features are easily set using the on-screen menus.The C20-DW Series is quick and easy to install. The camera is also featured in Pelco’s DomePak ® and ImagePak ® fixed camera dome/enclosure packages. The optional C10-UM wall/ceiling/rail mount kit offers easy installation in many nonenclosure applications,for all models.The C20-DW Series has a standard CS lens mount and can be used with fixed, manual, or auto iris (DC drive) lenses. The iris is controlled through a standard 4-pin square connector that is included on all Pelco auto iris lenses.On-screen configurable menus can be accessed locally using the rear panel button or remotely using any Pelco controller with Pelco D or Coaxitron ® protocol. Use these menus to select a specific profile, to customize and save camera settings for the specific application, and trigger alarm out functions.The C20-DW Series is equipped with configurable alarm in and alarm out functions for external devices such as IR lighting control,wiper operation, and local alerting upon alarm of an external device.The C20-DW Series from Pelco is ideal for critical security applications requiring the best analog images in all types of lighting and system configurations.C20-DW(LENS NOT SUPPLIED WITH CAMERA)Pelco by Schneider Electric3500 Pelco Way, Clovis, California 93612-5699 United States USA & Canada Tel (800) 289-9100 Fax (800) 289-9150International Tel +1 (559) 292-1981 Fax +1 (559) MODELSC20-DW-61/3-inch CCD high resolution day/night WDR camera, 24 VAC or 12 VDC, NTSC format C20-DW-6X 1/3-inch CCD high resolution day/night WDR camera, 24 VAC or 12 VDC, PAL formatC20-DW-7X1/3-inch CCD high resolution day/night WDR camera, 220 VAC, PAL formatGENERALImaging Device Sony ® 1/3-inch Super HAD CCD II ™ 960H Signal Processing Sony new digital signal processor, Effio-P ™Dynamic Range 120 dBDay/Night Operation Day Infrared (IR) cut filterNight BK-7 glass, same optical displacement as day modePicture Elements NTSC 976 (H) x 494 (V), approx. 480k PAL976 (H) x 582 (V), approx. 570k Sensing Area 4.7 x 3.5 mm (3/16 x 1/8-inch)Scanning System NTSC 525 lines, 2:1 interlace PAL625 lines, 2:1 interlace Synchronization System AC line lock/Internal Horizontal Resolution 650TV lines Auto Iris Lens Type DC driveElectronic Shutter Range NTSCAuto, 1/60 to 1/100,000 sec;Manual, 1/60 to 1/10,000 secPAL Auto, 1/50 to 1/100,000 sec;Manual, 1/50 to 1/10,000 secNOTE: Slow shutter support is 2X to 128X.Sensitivity Color20ms, PAL; 17ms, NTSC 0.13 lux, f/1.2, 30 IRE 500ms 0.03 lux, f/1.2, 30 IRE Mono20ms, PAL; 17ms, NTSC 0.05 lux, f/1.2, 30 IRE 500ms 0.00004 lux, f/1.2, 30 IRE Signal-to-Noise Ratio 48 dB (>52 dB by parameter adjustment)Automatic Gain Control Off/on up to 36 dB, 16 levels configurable Backlight Compensation Yes White Balance ATW/push lock/manual/anti-CR/user2/user/pushColor Correction With white balance Video Output 1 Vp-p, 75 ohms Auto White Balance Range 2,500° to 9,500°K Noise Reduction (DNR)3D Color Correction Adaptive Privacy Zones Yes, 15 sizable windows Motion Detection Yes, four areas sensitivity selectable Camera Titles Yes, up to 20 characters Digital Zoom 255X Image Stabilization Yes, (under 10Hz)Scene Learning/Analytics Yes (defocusing, camera tamper)Remote Access RS-485 and Coaxitron Alarm Input 1Alarm Output 1ELECTRICALPower Requirement C20-DW-6 12 VDC/24 VAC +10% to –15%, 60 Hz C20-DW-6X 12 VDC/24 VAC +10% to –15%, 50 Hz C20-DW-7X220 VAC +10% to –15%, 50 HzPower ConsumptionC20-DW-6 /C20-DW-6X 4.5 W C20-DW-7X 5.5 WPower Connector 2-pin terminal block with push lock, or line cord on 220 VAC models Video Connector BNCAuto Iris Connector4-pin connector (miniature square)MECHANICALLens Mount CS mountCamera Mount1/4-inch UNC-20 screw, top or bottom of camera housingENVIRONMENTALOperating Temperature –10° to 55°C (14° to 131°F)Storage Temperature –20° to 60°C (–4° to 140°F)Operating Humidity 20% to 90%, noncondensing Storage Humidity20% to 90%, noncondensingPHYSICALDimensions (includes BNC)108 x 60 x 55 mm(4.25" L x 2.36" W x 2.17" H)Weight (without lens) C20-DW-6/C20-DW-6X 0.30 kg (0.66 lb)C20-DW-7X 0.45 kg (0.99 lb)Shipping WeightC20-DW-6/C20-DW-6X 0.55 kg (1.21 lb)C20-DW-7X0.60 kg (1.32 lb)CERTIFICATIONS•CE, Class B•FCC, Class B •UL/cUL ListedRECOMMENDED MOUNTSC10-UMC10 series universal wall/ceiling/rail mount kitRECOMMENDED POWER SUPPLIESTF2000Power supply for one 24 VAC camera, 20 VA MCS Series Multiple 24 VAC camera power supply, indoor WCS SeriesSingle/multiple 24 VAC camera power supply, outdoorRECOMMENDED LENSES13VA/13VD Series Varifocal lenses, 1/3-inch format; 13VA (manual iris); 13VD (auto iris, DD)13ZD SeriesMotorized zoom lenses, 1/3-inch format (auto iris, DD)Pelco, the Pelco logo, and other trademarks associated with Pelco products referredto in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their respective companies.Product specifications and availability are subject to change without notice.©Copyright 2012, Pelco, Inc. All rights reserved.。
MAX266中文数据手册
MAX266中文数据手册MAX266/265中文数据手册By Hi_Cracker @whu引脚电阻可编程通用高效滤波器-----MAX266/265General Description和MAX265是高效的容滤波器，专门设计用于需要高精度滤波的应用MAX266场合。
内置了两个独立的滤波模块，可以配置成低通，高通，带通，带阻，全通滤波器。
中心频率或者截止频率的控制需要外接电阻以及6 Pin-Strapped 的输入特性来编程实现，然而，Q值仅用电阻连接实现。
各种各样类型的滤波器都可以实现（巴特沃斯，切比雪夫，椭圆滤波器等等）。
内部集成了两个运算放大器。
MAX265可以将中心/截止频率可以最高调到40Khz，然而，MAX266，通过使用一个低范围的fclk/fo比例系数，可以将fos 调到140Khz。
4MHZ系统时钟，可以通过一个晶振或是额外的源获得。
滤波器的操作电压为从±2.37v到±6.3v或者+5V的单电源供电。
Application：声纳电子设备Anti-Aliasing 滤波器数字信号处理震动音频分析远程通信测试仪器Features滤波器参数设置软件化256bit的频率控制字电阻调整Q值和fo140Khz频率调节范围±5V或者单电源﹢5V操作电压Introduction每个MAX266/265都包含的两个可配置滤波器模块已经显示在数据手册前面的功能框图上。
fclk/fo编程输入（F0-F5）被两个滤波模块共用,然而，每个部分的fo仍然受到各自外接电阻的独立调节。
各个模块的的Q值也是受到各自的外接电阻的独立调节的。
MAX266使用比MAX265更低范围的取样比率（fclk/fo），这样就可以产生更高的信号带宽以及fo的可编程范围。
降低fclk/fo产生的影响主要就是比MAX265的滤波器参数的连续性稍微差了一些，但是这些不同可以通过使用图23所示的图形或是美信得滤波器软件来补偿。
绿色MAX DRC 0-10V智能包说明书
Leviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 ©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.DescriptionThe GreenMAX ® DRC 0-10V Smart Pack enables switching and 0-10V dimming control of a single zone of fixtures, allowing for a distributed control solution. Used to control multiple fixtures in a zone or for plug load control solutions, the DRC uses distributed relays, which eliminates the need to run wires back to a cabinet. This distributed system architecture saves on installation and equipment costs. DRC relays can be used as a normal or emergency relay; a remote relay with the GreenMAX DRC system; or as a single room control relay with the Sapphire™ Touch Screen.System DescriptionThe GreenMAX DRC Room Control System offers a fully distributed room control system, with each room operating independently of others—no dependence on network processors or centralized controllers. This revolutionary system is fully configurable via the GreenMAX DRC app for smart devices, and can be used to comply with IECC, ASHRAE 90.1, and 2022 Title 24, Part 6 occupancy/vacancy sensing, multi-level lighting, daylight harvesting, partial-ON, partial-OFF, scheduling, exterior lighting, demand response and receptacle control requirements.GreenMAX DRC AppWirelessly commission, configure, control, monitor and provision the GreenMAX DRC system using the GreenMAX DRC App designed for any WiFi-enabled Android or iOS smart device.Applications• Single channel LumaCAN 0-10V relay • Distributed controls• GreenMAX DRC remote relay • GreenMAX remote relay• Direct load control from Sapphire™ Use With These Leviton Systems • GreenMAX DRC• GreenMAX relay panels •Sapphire TouchscreenGreenMAX ® DRC 0-10V Smart PackFeatures• Single channel device—(1) 0-10V output plus (1) relay • Plug load controls • UL924 Emergency• Utilizes Leviton High Inrush Stability (H.I.S.) circuitry for increased reliability• Connects via the LumaCAN network using RJ45 connectors and CAT6 wiring• 0-10V control can be Class 1 or Class 2 wiring• Used for both switching only loads and dimming loads controllable with a 0-10V control signal• All relay models are latching to reduce parasitic energy waste over NO/NC relays• UL2043 Plenum rated—for use in Chicago Plenum applications—see technical article Install Notes• Installs as 4” square electrical box cover or via 1/2” nipple • When Class 2 in conduit is required, use 4” square extension ring and blank cover on low voltage side• May be field-painted to match surroundings (requires 4Sblank cover to protect Class 2 side)Wiring Diagram*Can be used to monitor normal power on emergency circuits, see solution sheet for details.**Depending on manufacture date, pink wire may be gray.LumaCANFor 120-277VAC applications only:Dimensions DiagramLeviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004Visit our Website at: /greenmaxdrc©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.G-9664E/G23-mmREV JUL 2023。
福特C-MAX产品说明书.pdf_1719187333.4150486
Feel the difference Ford C-MAXQuick guidecontained in this publication was correct at the time of going to print.In the interest of the right is reserved to change specifications,design or equipment at any time without notice and without incurring any obligations.This publication,or part thereof,may not be reproduced nor translated without our approval.Errors and omissions excepted.©Ford Motor Company2010All rights reserved.Part number:(CG3558en)05/201020100721103323ABOUT THISHANDBOOKThank you for choosing Ford.Werecommend that you take some time to get to know your vehicle better by reading this Quick guide,which summarizes some important aspects of your Owner'shandbook.The more that you know about your vehicle,the greater the safety and pleasure you will get from driving it.This Quick guide must be read conjunction with the Owner's handbook.WARNINGAlways drive with due care andattention when using and operating the controls and features on vehicle.QUICK STARTInstrument panel overviewLeft-hand driveE130098H IG F E D C B A WV U T S R P O N Q L M JKRight-handdriveE130099HI G B DC FE AWRT SUVKL QPN MOJDoor lock button.I Hazard warning flasher J Power liftgate switch.K Parking aid switch.L Active park assist switch.M Heated rear window N Heated windscreen switch.O Climate controls.P E87511E87379AB CDouble locking the doors and the luggage compartment lid with the remote controlPress button B twice within three seconds.GLOBAL OPENING AND CLOSINGWARNINGFor all warnings and cautions,refer to your Owner's handbook.To open or close all the windows,press and hold the lock or the unlock button on the remote control for at least three seconds.Press either the lock or the unlock button again to stop the function.DISARMING THE ALARMVehicles without keyless entryPerimeter alarmDisarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded key,or unlocking the doors or the luggagecompartment lid with the remote control.Category one alarmDisarm and silence the alarm by unlocking the doors with the key and switching the ignition on with a correctly coded keywithin 12seconds,or unlocking the doors or the luggage compartment lid with the remote control.Vehicles with keyless entryNote:A valid passive key must be located within the detection range of that door for keyless entry.Perimeter alarmDisarm and silence the alarm by unlocking the doors and switching the ignition on,or unlocking the doors or the luggagecompartment lid with the remote control.Category one alarmDisarm and silence the alarm by unlocking the doors and switching the ignition on within 12seconds,or unlocking the doors or the luggage compartment lid with the remote control.WINDSCREEN WIPERSWindscreen wipersE128444ACD BA B C DIntermittent wipeCA BE128445Short wipe interval A Intermittent wipe B Long wipe intervalCThe rotary control can be used to the intermittent wipe interval.REAR WINDOW WIPER WASHERSWARNINGFor all warnings and cautions,to your Owner's handbook.E129193ABE129194E70719BLIND SPOT For toBlindspot information system (BLIS)The system is a convenience feature aids the driver in detecting vehicles may have entered the blind spot zone The system will alert you if certain vehicles enter the blind spot zone whilst driving.AAE124788E124736MANUALCLIMATECONTROLCooling the interiorquicklyE71381E71377E131534E131535E71382E78730BAMono modeIn mono mode,the temperature settings for both the driver’s and passenger’s side are linked.If you adjust the temperature using the rotary control on the driver’s side,the settings will be adjusted to the same setting on the passenger’s side.HEATED WINDOWS AND MIRRORSHeated windowsUse the heated windows to defrost or demist the windscreen or rear window.Note:The heated windows operate only when the engine is running.Heated windscreenE72506Heated rear windowE72507Vehicles without auxiliary heater If the ambient temperature is below 5°C (41°F)and the engine coolant is below 65°C (149°F),the heated windscreen and heated rear window will switch on automatically.They will switch off automatically after a short time.Heated exterior mirrorsElectric exterior mirrors are fitted with a heating element that will defrost or demist the mirror glass.They will switch onautomatically when you switch the heated rear window on.MANUAL SEATSWARNINGFor all warnings and cautions,refer to your Owner's handbook.Moving the seats backwards and forwardsE130249Adjusting the height of the driver’s seatE70730Adjusting the angle of the seatbackE130250HEAD RESTRAINTSWARNINGFor all warnings and cautions,refer to your Owner's handbook.E66539Adjust the head restraint so that the top of it is level with the top of your head.ELECTRICSEATSE78060Forto MaketheisNote:You can use the space between the outboard seats to access the thirdseats whenthe centre seat has been stowed.E129298E129302E129299E70723WARNINGSThe keyless starting systemfunction if the key is closeobjects or electronic devicesas mobilephones.E85766FortoWhencoolingseveralFortoE86613E119080to drain into E119081ACTIVE PARK ASSISTWARNINGSFor all warnings and cautions,to your Owner's handbook.Active park assist does not you of your responsibility to due care and attention.rain,snow,Move forwards kph (18mph).assist control indicator lever the left-hand AE130107Drive slowlyto position A ,then follow system instructions.E130108Move the vehicle backwards cautiouslyusing the accelerator and brake pedals to control the vehicle.Stop the vehicle when For to E130072Changing the set speedE130073ABFor to。
WDP-207系列智能保护控制装置说明书-V2.3
WDP-207D系列智能保护控制装置说明书(V2.20)南瑞华宁自动化设备有限公司声明致：尊敬的用户您好，衷心感谢您选择了WDP-207D系列数字式保护控制装置‼WDP-207D系列数字式保护控制装置以其优越的性价比、可靠的保护性能、简洁明了的操作界面、典雅大方的外型、精巧实用的键盘，使您不悔于您的选择。
在仔细阅读了这本用户手册之后，您将对WDP-207D系列数字式保护控制装置的各项菜单操作有深刻了解：全中文菜单具备明显的提示性，辅助功能设置灵活，定值修改方便快捷，事件记录记载详细。
本使用说明书作为WDP-207D系列数字式保护控制装置的通用使用说明书，适用于：●WDP-217D型线路保护装置●WDP-207D型母联保护装置●WDP-237D型变压器保护装置●WDP-227D型电容器保护装置●WDP-247D型电动机保护装置●WDP-9072型PT保护装置我们拥有一支优秀的售后服务队伍，用户所购买的产品将得到我们时时刻刻的关心。
100%用户满意度是我们追求的宗旨。
目录声明 (1)第一部分装置简介 (6)1.装置概述 (6)1.1 功能概述 (6)1.2 引用标准 (7)1.3 装置特点 (7)1.4装置结构 (7)2．主要技术指标 (8)2.1 技术参数 (8)2.2 环境参数 (9)3附录：开孔尺寸 (10)第二部分技术说明 (11)WDP-217D线路保护装置 (11)1.功能配置 (11)2．功能说明 (11)2.1 三段式相间过流保护 (11)2.2零序过流告警和跳闸保护 (12)2.3 小电流零序过流告警和跳闸保护 (12)2.4 相间合闸加速保护 (12)2.5三相一次重合闸 (12)2.6过负荷保护 (13)2.7系统异常工况报警及闭锁功能 (13)3．装置整定 (13)3.1 装置软压板整定 (13)3.2 装置定值整定 (14)3.3 装置参数整定 (15)4．保护原理接线图 (16)1．功能配置 (17)2．功能说明 (17)2.1 三段式相间过流保护 (17)2.2相间充电保护 (17)2.3过负荷保护 (18)2.4 系统异常工况报警及闭锁功能 (18)3．装置整定 (18)3.1 装置软压板整定 (18)3.2 装置定值整定 (18)3.3 装置参数整定 (19)4．保护原理接线图 (20)1．功能配置 (21)2．功能说明 (21)2.1 三段式相间过流保护 (21)2.2零序过流告警和跳闸保护 (22)2.3 小电流零序过流告警和跳闸保护 (22)2.6 低电压保护 (22)2.7 油浸变非电量保护 (23)2.8干式变非电量保护 (23)2.9系统异常工况报警及闭锁功能 (23)3．装置整定 (23)3.1 装置软压板整定 (24)3.2 装置定值整定 (24)3.3 装置参数整定 (26)4．保护原理接线图 (27)WDP-227D电容器保护装置 (28)1．功能配置 (28)2．功能说明 (28)2.1 三段式相间过流保护 (28)2.2过电压保护 (28)2.3 低电压保护 (29)2.4 不平衡电压保护 (29)2.5 不平衡电流保护 (29)2.6 非电量保护 (29)2.7系统异常工况报警及闭锁功能 (30)3．装置整定 (30)3.1 装置软压板整定 (30)3.2 装置定值整定 (30)3.3 装置参数整定 (32)4．保护原理接线图 (33)WDP-247D电动机保护装置 (34)1．功能配置 (34)2．功能说明 (34)2.1 起动时间（Tstart） (34)2.2 三段式相间过流保护 (34)2.3 负序过流保护 (35)2.4零序过流告警和跳闸保护 (35)2.5小电流零序过流告警和跳闸保护 (35)2.6 过热保护原理 (35)2.7 过电压保护 (36)2.8 低电压保护 (36)2.9 过负荷保护 (36)2.10 非电量保护 (36)2.11系统异常工况报警及闭锁功能 (37)3．装置整定 (37)3.1 装置软压板整定 (37)3.2 装置定值整定 (37)3.3 装置参数整定 (39)4．保护原理接线图 (40)WDP-9072PT保护测控装置 (41)1.功能配置 (41)2.2 低电压保护 (41)2.3 母线接地保护 (41)3.1 装置软压板整定 (41)3.2 装置定值整定 (41)3.3 装置参数整定 (42)4．保护原理接线图 (43)1．装置介绍 (45)1.1面板451.2键盘 (45)1.3信号灯 (46)1.4通讯接口 (46)1.5液晶461.6背板端子 (47)2操作说明（以WDP-217D为例） (47)2.1.模拟量 (48)2.1.1保护值 (49)2.1.2测量值 (49)2.2压板投退 (49)2.3定值整定 (50)2.4参数设置 (50)2.5报告查询 (51)2.5.1告警 (51)2.5.2动作 (51)2.5.3遥信 (51)2.6清除报告 (52)2.7修改时钟 (52)2.8开入显示 (52)2.9开出传动 (53)2.10偏移校验 (53)2.11增益校验 (54)2.12版本信息 (54)3装置调试 (54)3.1装置通电前检查 (55)3.2绝缘检查 (55)3.3上电检查 (55)3.4采样精度检查 (55)3.5接点输出校验 (55)3.6定值校验 (55)3.7跳合闸电流保持试验 (55)3.8相序检查 (55)3.9校准时钟 (55)注意事项 (56)第三部分使用说明1装置介绍................................................................................................................... 错误！未定义书签。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
PACKAGING INFORMATIONOrderable Device Status (1)Package Type PackageDrawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)MAX207CDB ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDBE4ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDBG4ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDBR ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDBRE4ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDBRG4ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDW ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDWE4ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDWG4ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDWR ACTIVE SOIC DW 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDWRE4ACTIVE SOIC DW 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207CDWRG4ACTIVE SOIC DW 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDB ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDBE4ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDBG4ACTIVE SSOP DB 2460Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDBR ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDBRE4ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDBRG4ACTIVE SSOP DB 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDW ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDWE4ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDWG4ACTIVE SOIC DW 2425Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDWR ACTIVE SOIC DW 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDWRE4ACTIVE SOIC DW 242000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM MAX207IDWRG4ACTIVESOICDW242000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM(1)The marketing status values are defined as follows:PACKAGE OPTION ADDENDUM28-May-2007Addendum-Page 1元器件交易网ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.PACKAGE OPTION ADDENDUM28-May-2007TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant MAX207CDBR SSOP DB 242000330.016.48.28.8 2.512.016.0Q1MAX207CDWR SOIC DW 242000330.024.410.7515.7 2.712.024.0Q1MAX207IDBR SSOP DB 242000330.016.48.28.8 2.512.016.0Q1MAX207IDWRSOICDW242000330.024.410.7515.72.712.024.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) MAX207CDBR SSOP DB242000346.0346.033.0 MAX207CDWR SOIC DW242000346.0346.041.0 MAX207IDBR SSOP DB242000346.0346.033.0 MAX207IDWR SOIC DW242000346.0346.041.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandClocks and Timers Digital ControlInterface MedicalLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyRF/IF and ZigBee®Solutions Video&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2008,Texas Instruments Incorporated。