SB520-B中文资料
SB050中文资料
SB020 thru SB060Vishay General Semiconductor For technical questions within your region, please contact one of the following:Document Number: 88714Miniature Schottky Barrier RectifierFEATURES•Guardring for overvoltage protection •Very small conduction losses •Extremely fast switching •Low forward voltage drop •High frequency operation •Solder dip 260 °C, 40 s•Component in accordance to RoH S 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONSFor use in low voltage high frequency inverters,freewheeling, dc-to-dc converters, and polarity protection applications.MECHANICAL DATA Case: MPG06Epoxy meets UL 94V-0 flammability ratingTerminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102E3 suffix for consumer grade, meets JESD 201 class 1A whisker testPolarity:Color band denotes the cathode endPRIMARY CHARACTERISTICSI F(AV)0.6 AV RRM 20 V to 60 VI FSM 20 A V F 0.55 V , 0.70 V T J max.125 °C, 150 °CNote:(1) Pulse test: 300 µs pulse width, 1 % duty cycleMAXIMUM RATINGS (T A = 25°C unless otherwise noted)PARAMETERSYMBOLSB020SB030SB040SB050SB060UNIT Maximum repetitive peak reverse voltage V RRM 2030405060V Maximum RMS voltage V RMS 1421283542V Maximum DC blocking voltageV DC 2030405060V Maximum average forward rectified current at 0.375" (9.5 mm) lead length (Fig. 1)I F(AV)0.6APeak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 20 A Operating junction temperature range T J - 65 to + 125- 65 to + 150°C Storage temperature rangeT STG- 65 to + 150°CELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETERTEST CONDITIONS SYMBOLSB020SB030SB040SB050SB060UNIT Maximum instantaneous forward voltage (1)0.6 A V F 0.550.70VMaximum instantaneous reverse current at rated DC blocking voltage (1) T A = 25 °C T A = 100 °CI R0.5mA105.0元器件交易网SB020 thru SB060Vishay General SemiconductorDocument Number: 88714For technical questions within your region, please contact one of the following:Note:(1) Thermal resistance junction to lead P.C.B. mounted 0.375" (9.5 mm) lead lengthRATINGS AND CHARACTERISTICS CURVES (T A = 25 °C unless otherwise noted)THERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL SB020 SB030 SB040 SB050 SB060 UNIT T ypical thermal resistance (1) R θJA R θJL80 20°C/WORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODESB040-E3/540.20354550013" diameter paper tape and reelSB040-E3/730.203733000Ammo pack packagingFigure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge CurrentFigure 3. Typical Instantaneous Forward CharacteristicsFigure 4. Typical Reverse Leakage Characteristics元器件交易网SB020 thru SB060Vishay General Semiconductor For technical questions within your region, please contact one of the following:Document Number: 88714PACKAGE OUTLINE DIMENSIONS in inches (millimeters)Figure 5. Typical Junction CapacitanceFigure 6. Transient Thermal Impedance元器件交易网Disclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。
JISG3106-2004焊接结构用轧制钢材（中文）
日本工业标准焊接结构用轧制钢材JISG3106—2004序言本标准是根据标准化法第14条按照第12条第1项的规定，由社团法人日本钢铁联盟（JISF）提出依据原工业标准修订日本工业标准的申请，经日本工业标准调查委员会的审议，经济产业大臣修改的日本工业标准。
经过以上程序，JISG3106—1999被本标准所代替。
本标准的一部分，有与具有技术性质的专利权、申请公开后的专利申请、实用上的发明权或申请公开后实用上的发明注册申请相抵触的可能性，希望引起注意。
对于主宰与具有技术性质的专利权、申请公开后的专利申请、实用上的发明权或申请公开后实用上的发明注册申请有关的问题，经济产业大臣和日本工业标准化调查委员会不负责任。
JISG3106标准有以下所示附录。
附录1 （标准性附录）试样的采取位置附录2 （标准性附录）结构钢—钢板、宽扁钢、棒钢及型钢附录A （标准性附录）型钢试样的采取位置及方向（略）附录B （标准性附录）小尺寸冲击试样的冲击功值附录C （提示性附录）关于产品允许偏差的国际标准目录附录D （提示性附录）关于焊接性能的说明附录3 （提示性附录）JIS与对应的国际标准对比表前言本标准是对已修订的1999年原日本工业标准的正文部分的修订版，如扩大了扁钢适用范围，并规定将1995年发行的ISO630《结构钢——钢板、宽扁钢、棒钢及型钢》作为附录2，且不改变其技术内容的日本工业标准。
1 适用范围本标准适用于桥梁、船舶、车辆、石油贮罐、容器及其他焊接性能良好的结构件用热轧钢材（以下简称钢材）。
备注：应用本标准时，可以使用正文或附录2。
与本日本标准对应的国际标准如下所示。
另外，本标准与有关国际标准一致性程度的符号表示，根据ISO/IEC指南第21部分IDT——等同，MOD——修改，NEQ——非等效。
ISO630—1995结构钢——钢板、宽扁钢、棒钢及型钢（MOD）2 引用标准附表1中所示的标准，通过本标准的引用而构成本标准规定的一部分。
PS5R-B05中文资料
Electronic Timing Relays General Purpose Relays Switching Power Supplies INDUSTRIAL PRODUCTSKey features of the GE1A Series include:Large, clear knob for easy settingDPDT or SPDT + Instantaneous SPDT contactsavailable8 pin octal base8 time ranges Repeat error of +/-0.2% maximumGE1A Series - Single Function ON Delay Timers* For additional information, Timer types and operating functions, please contact Customer Support 1300 556 601* Part Numbers: Panel Mounting AccessoriesDIN Rail / Surface 8-Pin Fingersafe SocketPart No:SR2P-05C Panel Mounted Socket 8-Pin Solder TerminalPart No: SR2P-51Door Mounting Adapter Part No:GE9Z-AD Screw Terminal Socket for Door Mount Part No: SR6P-M08G Solder Terminal Socket for Door Mount Part No: 8-PinSR6P-S08Dust Cover Part No:GE9Z-C48* Part Numbers: Door Mounting AccessoriesGT3A Series - Analogue Multi Function TimersKey features of the GT3A series include:4 selectable operation modes on each modelExternal start, reset and pause inputsPanel mount or socket mountLarge variety of timing functionsPower and output status indicating LEDs* For additional information, Timer types and operating functions, please contact Customer Support 1300 556 601Part Numbers: Panel Mounting AccessoriesDIN Rail / SurfaceFingersafe Socket Part No: 8-Pin SR2P-05C 11-Pin SR3P-05C Panel Mounted SocketSolder TerminalPart No: 8-Pin SR2P-5111-Pin SR3P-51Door Mounting AdapterPart No: RTB-G01Screw Terminal Socket for Door Mount Part No: 8-Pin SR6P-M08G 11-Pin SR6P-M11G Solder Terminal Socket for Door MountPart No: 8-Pin SR6P-S0811-Pin SR6P-S11Part Numbers: Door Mounting Accessories6 amp 4 x C/O Flat Pin 110V AC RU4S-A110LED and push to test/manual 24V AC RU4S-A24latch included 24VDC RU4S-D2410 amp 2 x C/O Flat Pin 110V AC RU2S-A110LED and push to test/manual 24V AC RU2S-A24latch included 24VDCRU2S-D24RU Series - General Purpose RelaysKey features of the RU series include:Non-polarized LED indicatorSolder-free construction (lead-free)No internal wires Mechanical flag indicatorPush to test / manual latching lever with color coding forAC or DC coilSnap-on marking plateCadmium-free contactsContact rating 6A: 4 change-over 10A: 2 change-overRU2SM2S-05C SY4S-51SY4S-61SY4S-62RU4SY4S-05C SY4S-51SY4S-61SY4S-62SY4S-05C & SM2S-05C Clip SFA-101Clip SFA-202Clip SFA-301SY4S-51, -61ClipSFA-302Spring SY4S-51F1* Other voltages, options & accessories available Please contact Customer Support 1300 556 601SY4S-05CSM2S-05CSY4S-51SY4S-61ClipSFA-101, -202SH1B-51, 62SpringSY4S-51F1SH2B, SH4B, -51, -62Clip SFA-301, -302SH2B-05C SpringSY4S-S02F1Clip SFA-101, -202SH4B-05C Spring SH4B-02P1ClipSFA-101, -20210 amp 1 x C/O Flat Pin110V AC RH1B-UAC11024V AC RH1B-UAC2424VDC RH1B-UDC24RH Series - General Purpose Miniature RelaysKey features of the RH series include:available for a wide range of mounting applicationsLED indicator,push to test, latching(2 coils) and top mounting bracket available on request.*Part Numbers: RH4 (4 Pole Change Over)240VAC RH2B-ULAC24010 amp 2 x C/O Flat Pin110VAC RH2B-ULAC110With LED Indication24V AC RH2B-ULAC2424VDC RH2B-ULDC24*Part Numbers: RH2 (2 Pole Change Over)240VAC RH4B-ULAC24010 amp 4 x C/O Flat Pin110V AC RH4B-ULAC110With LED Indication24V AC RH4B-ULAC2424VDC RH4B-ULDC24RH1B SH1B-05C SH1B-51SH1B-62RH2B SH2B-05C SH2B-51SH2B-62RH4B SH4B-05C SH4B-51SH4B-62* Other voltages, options & accessories available.Please contact Customer Support 1300 556 601SH1B-05C SH1B-51SH1B-62 Options example: LED -RH1B-UL, Push to Test -RH1B-ULCThe information contained in this catalogue was correct at the time of printing.ALSTOM reserves the right to change any information without notice.National Customer Support CentreTelephone: 1300 556 601Facsimile: 1300 550 187.auINDUSTRIAL PRODUCTSPS5R Series Power Supplies - Standard Type PS5R Series Power Supplies - Slimline type。
BFR520中文资料
6. Thermal characteristics
Table 6: Rth(j-s)
[1]
Thermal characteristics Conditions
[1]
Symbol Parameter thermal resistance from junction to soldering point
5. Limiting values
Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCES VEBO IC Ptot Tstg Tj
[1]
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 1 September 2004
2 of 13
Philips Semiconductors
BFR520
NPN 9 GHz wideband transistor
9397 750 13397
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data sheet
Rev. 03 — 1 September 2004
4 of 13
Philips Semiconductors
Typ 120 0.4 9
Max 20 15 70 300 250 -
Unit V V mA mW pF GHz
博士安全B520辅助电源模块说明书
u为防火或防盗应用提供高达2 A 的12 V 待机电流（4 A 的盗警电流）u分别监测多达两个12 V 7-18 Ah 电池（多达36 Ah 的容量）u 提供多达80个小时的待机时间u 方便读取式开关寻址u使用博世标准TR1850插入式变压器B520辅助电源模块是一个辅助电源扩展设备，可通过SDI2总线连接到兼容的报警主机。
此模块受到监测并将所有状态更改传递给报警主机。
工业、商业和机构设施是B520模块的典型安装。
B520地址开关可用于实现轻松设备寻址。
SDI2输出端子为SDI2扩展设备（如键盘）提供辅助电源。
AUX PWR 端子为其他设备（如PIR 移动探测器）提供增强型辅助电源功能。
功能监测监控此模块通过SDI2总线监控并传送有关以下内容的状态信息：•操作（检测信号）•电池1 (BATT 1)•电池2 (BATT 2)•AC 输入电源(AC)•电池电量充足•电池电量不足•电池缺失指示灯•检测信号 [图标]。
当系统正常运行时，蓝色LED 指示灯闪烁亮起和熄灭。
LED 指示灯持续亮起或熄灭指示系统故障。
闪烁三次指示通信故障。
•BATT 1 LED 指示灯。
LED 指示灯呈绿色持续亮起指示BATT 1的电池状态正常工作。
闪烁指示电池电量不足。
闪烁三次指示电池充电器故障。
LED 指示灯熄灭指示电池缺失。
•BATT 2 LED 指示灯。
LED 指示灯呈绿色持续亮起指示BATT 2的电池状态正常工作。
闪烁指示电池电量不足。
闪烁三次指示电池充电器故障。
LED 指示灯熄灭指示电池缺失。
•AC LED 指示灯。
LED 指示灯呈绿色持续亮起指示AC 电源正在工作。
正在执行电池测试时会产生脉冲式LED 指示灯（每秒3个脉冲）。
闪烁指示AC 电源不足或发生故障。
电池充电在AC 电源发生故障的情况下，连接到电池端子的已充满电的电池将为B520提供电源。
如果B520的AC 电源输入发生故障（缺失或电量低），则B520将自动从主电源(AC)切换到备用电源（电池）。
SB540中文资料
100
10
Tj = 100°C
3
1.0
Tj = 25°C
2
1
Resistive or Inductive Load 0.375” (9.5mm) lead length SB520 - SB540 SB550 & SB560
0.1
0 0 25 50 75 100 125 150
0.01 0 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, SB520 - SB540
1. Measured at ambient temperature at a distance of 9.5mm from case. 2. Short duration test pulse used to minimize self-heating effect. 3. Thermal resistance junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length.
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See Figure 1) (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (Note 2) Peak Reverse Current at Rated DC Blocking Voltage (Note 2) @ IF = 5.0A @ TA = 25°C @ TA = 100°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM RqJA RqJL Tj TSTG
Keysight E5052B Signal Source Analyzer 说明书
E5052B Signal Source Analyzer 10 MHz to 7 GHz, 26.5 GHz, or 110 GHzTable of ContentsDefinitions (3)Specification (spec.) (3)Typical (typ.) (3)Supplemental performance data (SPD) (3)General characteristics or nominal (nom.) (3)RF Input Port (3)Phase Noise Measurement (4)Spectrum Monitor Measurement (8)Frequency and RF Power, DC Supply Current Measurements (9)Transient Measurement (10)AM Noise Measurement (13)Baseband Noise Measurement (14)Internal Timebase (14)General Information (15)EMC, safety, environment and compliance (17)Display Funtions (19)Data Processing Capabilities (20)Optional Application Software (20)System Performance with the E5053A Microwave Downconverter (21)About “mmW application”: (24)E5053A Microwave Downconverter Specifications and General Information Summary (25)Web Sources (29)DefinitionsAll specifications apply over a 23 °C ± 5 °C range (unless otherwise stated) and 30 minutes after the instrument has been turned on.All specified and supplemental values for RF input signals are applicable to sinusoidal-wave carriers unless otherwise noted.Specification (spec.)Warranted performance. Specifications include guard-bands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions.Following supplemental information is intended to provide information that is helpful for using the instrument.Typical (typ.)Describes performance that will be met by a minimum of 80% of all products. Supplemental performance data (SPD)Represents the value of a parameter that is most likely to occur; the expected mean or average. General characteristics or nominal (nom.)A general, descriptive term that does not imply a level of performance.RF Input PortTable 1-1. RF IN portPhase Noise MeasurementTable 1-2. Phase noise measurement performance RF IN frequency range 10 MHz to 7 GHzMeasurement frequency bands 10 MHz to 41 MHz, 39 MHz to 101 MHz, 99 MHz to 1.5 GHz, 250 MHz to 7 GHz1RF frequency tracking range 0.4% of carrier frequencyMeasurement parameters SSB phase noise [dBc/Hz], Spurious noise [dBc], Integrated rms phase deviation [deg, rad] or time jitter [s], Residual FM [Hz rms]Number of trace 1 data trace and 1 memory trace with ‘data math’ functions Measurement trigger continuous/single/hold source: internal/external/manual/bus Offset frequency range (effective)RF carrier signal > 1 GHz(> 400 MHz for wide capture mode) 1 Hz to 100 MHz1 Hz to 40 MHz (wide capture mode)10 Hz to 100 MHz10 Hz to 40 MHz (wide capture mode)RF carrier signal < 1 GHz(< 400 MHz for wide capture mode)1 Hz to 10% of carrier frequency 10 Hz to 10% of carrier frequency Phase noise uncertainty2 at effective offset frequenciesOffset 1 Hz to 10 Hz ± 4 dB (SPD) N/AOffset 10 Hz to 100 Hz ± 4 dB (SPD)Offset 100 Hz to 1 kHz ± 3 dBOffset 1 kHz to 40 MHz ± 2 dB (± 3 dB for wide capture range mode)Offset 40 MHz to 100 MHz ± 3 dBSSB phase noise sensitivity See Table 1-3, 1-4, 1-5, Figure 1-1, 1-2, 1-3IF gain setting 0 dB to 50 dB in 10 dB step(not available in wide capture mode) 0 dB to 30 dB in 10 dB step(not available in wide capture mode)Enhanced sensitivity Cross-correlation method available.Number of correlation = 1 to 10,000See Table 1-5 and Figure 1-3N/ABuilt-in LO phase noise optimization < 150 kHz (optimized for better close-in phase noise measurement)> 150 kHz (optimized for better far-out phase noise measurement) See Figure 1-4.Reference oscillator bandwidth optimization Narrow / Wide See Figure 1-5.Residual spurious response level < -80 dBc (SPD) at > 10 kHz offset frequency with correlation > 120 sec.except for 23.5 MHz ± 1 MHz and 71 MHz ± 3 MHz of carrier frequency< -65 dBc (typical) at 1 kHz to 10 kHz offset frequency Measurement time See Table 1-6Measurement range Capture mode: Normal or WidePN mode (Regular) RBW: AutoX-axis: Offset frequency in log scaleSegment PN mode3RBW: 96 mHz to 25 kHz (stepped), Maximum offsetfrequency span: 93.2 Hz to 24.4 MHz (stepped)X-axis: Offset frequency in liner scaleN/A1. Wide capture mode is available for 250 MHz to 7 GHz only2. Phase noise uncertainty: specified at 10 MHz and 1 GHz of carrier frequency with 0 dBm level. PN level > -60 dBc3. Segment PN mode is available with the firmware revision 3.20 or later. In this datasheet, specification of phase noisesensitivity, residual spurious response level and measurement time are applicable to the regular PN mode. In thesegment PN mode, number of these parameters depend on the measurement setting. For more detail, refer to theuser’s manual.Table 1-3. SSB phase noise sensitivity (dBc/Hz) in normal capture range mode (E5052B)LO optimization: < 150 kHz, Ref. BW: narrow, correlation = 1, RF input: +5 dBm, start offset frequency:1 Hz, measurement time = 12.9 sec1 10 100 1 k 10 k 100 k 1 M10 M40 M100 M10 MHz specification -148 -156 -166 -168 – – – SPD -100 -131 -151 -164 -172 -178 -178 – – –100 MHz specification -147 -156 -163 -168 -170 – – SPD -80 -111 -136 -154 -164 -171 -175 -178 – –1 GHz specification -128 -137 -144 -160 -170 -168 -169 SPD -60 -91 -116 -135 -146 -155 -171 -178 -178 -1773 GHz specification -118 -127 -133 -149 -163 -164 -165 SPD -50 -81 -106 -127 -135 -142 -161 -175 -177 -1777 GHz specification -111 -120 -127 -143 -157 -158 -159 SPD -43 -74 -99 -121 -129 -138 -154 -171 -174 -175Table 1-3-W. SSB phase noise sensitivity (dBc/Hz) in wide capture range mode (E5052B) (SPD)LO optimization: < 150 kHz, Ref. BW: narrow, correlation = 1, RF input: +5 dBm, start offset frequency: 1 Hz, measurement time = 12.9 sec1 10 100 1 k 10 k 100 k 1 M10 M40 M 1 GHz SPD –––-108 -128 -144 -155 -160 -160 3 GHz SPD –––-107 -119 -134 -150 -158 -158 7 GHz SPD –––-107 -112 -126 -146 -156 -156Table 1-4. SSB phase noise sensitivity (dBc/Hz) in normal capture range mode (E5052B Option 011)LO optimization: < 150 kHz, Ref. BW: narrow, correlation = 1, RF input: +5 dBm, start offset frequency: 10 Hz, measurement time = 3.3 sec10 100 1 k 10 k 100 k 1 M 10 M 40 M 100 M10 MHz specification -135 -147 -160 -160 –––SPD -120 -135 -151 -163 -170 -170 –––100 MHz specification -142 -152 -154 -156 -159 ––SPD -107 -128 -149 -160 -168 -170 -170 ––1 GHz specification -125 -134 -141 -157 -160 -160 -160 SPD -86 -111 -132 -143 -152 -168 -170 -170 -1703 GHz specification -115 -124 -130 -146 -160 -160 -160 SPD -76 -101 -124 -132 -139 -158 -170 -170 -1707 GHz specification -108 -117 -124 -140 -154 -155 -156 SPD -69 -94 -118 -126 -135 -151 -165 -170 -170Table 1-5. SSB phase noise sensitivity improvement by correlation10 100Improvement factor 5 dB 10 dB 15 dB 20 dBTable 1-6. E5052B Typical measurement time (sec) for phase noiseLO optimization: < 150 kHz, Ref. BW: narrow, correlation = 1, RF input: +5 dBm1 10 100 1 k 100 kHz 8.8 2.2 0.28 0.04 1 MHz 8.8 2.2 0.28 0.04 10 MHz 10 2.5 0.32 0.04 40 MHz 10 2.5 0.32 0.04 100 MHz 12.9 3.3 0.41 0.05Measurement time (sec) = (0.4 (Capture range narrow) or 0.6 (Capture range wide)) + the above value x number of correlation when applying cross-correlation function (E5052B ONLY).For E5052B Option 011, number of correlation = 1.Figure 1-1. SSB phase noise sensitivity (E5052B, SPD)(LO < 150 kHz optimized, +5 dBm input, start offset frequency = 1 Hz, measurement time = 12.9 sec.)Figure 1-2. SSB phase noise sensitivity (E5052B Option 011, SPD) (LO < 150 kHz optimized, +5 dBm input, start offset frequency = 10 Hz, measurement time = 3.3 sec.)Figure 1-3. SSB phase noise sensitivity improvement by correlation (E5052B, SPD) (carrier 1 GHz, LO < 150 kHz optimized, +5 dBm input, start offset frequency = 1 Hz)Figure 1-4. SSB phase noise change by LO optimization (SPD) (carrier 1 GHz, +5 dBm input, start offset frequency = 1 Hz, reference oscillator:narrowband)Figure 1-5. SSB phase noise sensitivity change by reference oscillator bandwidth (SPD) (carrier 100 MHz, +5 dBm input, start offset frequency = 1 Hz, LO optimization: < 150 kHz)Spectrum Monitor MeasurementTable 2-1. Spectrum monitor performanceRF frequency range10 MHz to 7 GHzMonitoring span 15 MHz maximum with linear scaleRBW 1.53 Hz to 400 kHzMeasurement parameters dBm, dBV, watt, volt, dBm/Hz, dBV/Hz, watt/Hz, VV/√HHHH Absolute measurement uncertainty ± 2 dB typical @ -10 dBm (att. = 10 dB)Relative measurement uncertainty ± 1.5 dB (-60 dBm to -10 dBm, ratio)Residual noise floor -95 dBm typical @ RBW = 24.4 HzMeasurement trigger continuous/single/hold source: internal/external/manual/busFrequency and RF Power, DC Supply Current Measurements Table 3-1. Frequency and power measurement performanceTransient MeasurementTable 4-1. Transient measurement performanceTable 4-2. Wideband mode frequency resolution vs. time span and frequency bandTime span [s] 10 μ20 μ50 μ0.1 m 0.2 m 0.5 m 1 m 2 m 5 m 10 m 20 m 50 m 0.1 0.2 0.5 1 2 5 10 Time resolution[s] 8 n 16 n 40 n 80 n 0.16 μ0.4 μ 1 μ 2 μ 5 μ10 μ20 μ50 μ125 μ250 μ625 μ 1.25 m 2.5 m 6.25 m 12.5 m Measurementpoint 1251 1251 1251 1251 1251 1251 1001 1001 1001 1001 1001 1001 801 801 801 801 801 801 8010.05 to 0.15 GHz 28 k 9 k 3 k 1 k0.1 to 0.3 GHz 56 k 19 k 7 k 2 k0.2 to 0.6 GHz 112 k 39 k 14 k 4 k0.3 to 0.9 GHz 168 k 59 k 21 k 7 k0.4 to 1.2 GHz 225 k 79 k 28 k 9 k0.5 to 1.5 GHz 281 k 99 k 35 k 12 k0.6 to 1.8 GHz 337 k 119 k 42 k 14 k0.8 to 2.4 GHz 450 k 159 k 56 k 19 k1.0 to 3.0 GHz 562 k 198 k 70 k 24 k1.2 to 3.6 GHz 675 k 238 k 84 k 29 k1.4 to 4.2 GHz 787 k 278 k 98 k 34 k1.6 to 4.8 GHz 900 k 318 k 112 k 39 k1.8 to 5.4 GHz 1.012 M 357 k 126 k 44 k2.0 to 6.0 GHz 1.125 M 397 k 140 k 49 k2.2 to 6.6 GHz 1.237 M 437 k 154 k 54 k2.4 to 7.2 GHz 1.35 M 477 k 168 k 59 kTable 4-3. Narrowband mode (80 MHz span)/frequency resolution vs. time spanTable 4-4. Narrowband mode (25.6 MHz span)/frequency resolution vs. time spanTime span [s] 10 μ20 μ50 μ0.1 m 0.2 m 0.5 m 1 m 2 m 5 m 10 m 20 m 50 m 0.1 0.2 0.5 1 2 5 10 Time resolution[s] 8 n 16 n 40 n 80 n 0.16 μ0.4 μ 1 μ 2 μ 5 μ10 μ20 μ50 μ125 μ250 μ625 μ1.25 m 2.5 m 6.25 m 12.5 m Measurementpoint 1251 1251 1251 1251 1251 1251 1001 1001 1001 1001 1001 1001 801 801 801 801 801 801 801 Frequencyresolution [Hz] 7 k 2.5 k879 311Table 4-5. Narrowband mode (1.6 MHz span)/frequency resolution vs. time spanTable 4-6. Narrowband mode (200 kHz span)/frequency resolution vs. time spanTable 4-7. Narrowband mode (25 kHz span)/frequency resolution vs. time spanTable 4-8. Narrowband mode (3.125 kHz span)/frequency resolution vs. time span0.210.510.51 1 2 5 10 Time resolution [s] 65 μ1131 μ1328 μ1655 μ1 1.31 m 3.3 m18.2 m1 Measurement point 1527 1527 1527 1527 1527 1527 1222 Frequency resolution [Hz] 0.01 3 m 1 m 0.4 m1. Means approximatelyAM Noise MeasurementTable 5-1. AM noise measurement performanceRF frequency range 60 MHz to 7 GHzEffective offset frequency range 10 Hz to 40 MHz(@ > carrier 400 MHz)10 Hz to 10% of carrier frequency (@ < carrier 400 MHz)AM noise sensitivity See Table 5-2.Measurement uncertainty1 ± 4 dB (100 Hz to 1 kHz offset) typical ± 2 dB (1 kHz to 1 MHz offset) typical ± 3 dB (1 MHz to 40 MHz offset) typicalSpurious level < -65 dBc/Hz (at > 1 kHz offset) typicalMeasurement trigger continuous/single/hold source: internal/external/manual/busTable 5-2. AM noise sensitivity [dBc/Hz] correlation = 1, RF input: 0 dBm, > 400 MHz1 10 100E5052B start frequency = 1 Hz, measurement time = 13 sspecification – – – -127 -138 -147 -150 -154 -155 typical – -103 -117 -131 -142 -151 -154 -158 -159 E5052B-011 (Option 011) start frequency = 10 Hz, measurement time = 3.3 sspecification – – – -124 -135 -144 -147 -151 -152 typical – -100 -114 -128 -139 -148 -151 -155 -156 1. AM noise measurement uncertainty: specified at 1 GHz of carrier frequency with 0 dBm level. AM level > -60 dBcBaseband Noise MeasurementTable6-1.Baseband noise measurement performanceBaseband input connector BNC, 50 Ω nominal, AC coupledMeasurement frequency range 1 Hz to 100 MHz (E5052B)10 Hz to 100 MHz (E5052B Option 011)Measurement parameters dBV/Hz, dBm/Hz, V/√HHHHMeasurement level range < +5 dBmBaseband input damage level > +23 dBm, > 35 V DCNoise floor level See Table 6-2.Measurement uncertainty1 ± 4 dB (< 1 kHz) SPD± 2 dB (> 1 kHz) typicalMeasurement trigger continuous/single/hold source: internal/external/manual/busTable 6-2. Baseband noise floor [dBm/Hz] correlation = 1, baseband input: 0 Ω terminated Internal TimebaseTable 7-1. Internal timebase (OCXO) performanceGeneral InformationTable 8-1. Front panel informationConnectors/terminalsRF IN Type-N (female), 50 ΩBaseband IN BNC (female), 50 Ω, AC coupledDC power BNC (female),DC control BNC (female), 50 ΩRF1/RF2, IN/OUT SMA (female), 50 ΩSee the simplified block diagram.USB 2 ports (designed for USB2.0)Probe DC power output +15 V, 150 mA maximum-12.6 V, 150 mA maximumGround terminal 1Display 10.4 inch TFT color LCD with touch screen 1,024 x 768 resolution1 1. Valid pixels > 99.998%. Below 0.002% of fixed points of black, blue, green or red are not regarded as failuresTable 8-2. Rear panel information1. USB test and measurement class (TMC) interface that communicates over USB, complying with the IEEE-488.1 andIEEE-488.2 standards.EMC, safety, environment and compliance1. To find a current Declaration of Conformity for a specific Keysight product, go to: EnvironmentFigure 8-1. Front viewFigure 8-2. Rear viewFigure 8-3. Side viewDisplay FunctionsTable 9-1. Display functions (windows and traces)Data Processing CapabilitiesTable 9-2. Data processing capabilitiesOptional Application SoftwareTable 9-3. E5001A SSA-J precision clock jitter analysis softwareSystem Performance with the E5053A Microwave DownconverterThe system performance is the combination of the E5052B SSA and the E5053A microwave downconverter. All data is typical performance.Table 10-1. System performance characteristics1. Segment PN mode is available with the firmware revision 3.20 or later. In segment PN mode, offset frequency rangeis limited up to 99.9 MHz when frequency range is 9 to 26.5 GHz frequency band.Figure 10-1. E5053A with E5052B simplified block diagramTable 10-2. System SSB phase noise sensitivity (dBc/Hz) in normal capture range mode (E5053A +E5052B) (SPD) 0 dBm input, start offset frequency = 1 Hz, correlation = 1, LO optimization: < 150 kHz, measurement time = 13 secTable 10-2-W. System SSB phase noise sensitivity (dBc/Hz) in wide capture range mode(E5053A+E5052B) (SPD) 0 dBm input, start offset frequency = 1 Hz, correlation = 1, LO optimization: < 150 kHz, measurement time = 13 secTable 10-2-A. System AM noise sensitivity (dBc/Hz) (E5053A + E5052B) (SPD) correlation = 1,RF input: 0 dBm, > 400 MHz1 10 100E5052B start frequency = 1 Hz, measurement time = 13 s3 to 10 GHz – -100 -110 -117 -127 -130 -137 -137 -137 10 to 26.5 GHz – -100 -110 -117 -127 -129 -129 -129 -129 5052B-011 (Option 011) start frequency = 10 Hz, measurement time = 3.3 s3 to 10 GHz – -97 -107 -114 -124 -127 -134 -134 -134 10 to 26.5 GHz – -97 -107 -114 -124 -126 -126 -126 -126Figure 10-2. System phase noise sensitivity (E5053A + E5052B) (SPD)Figure 10-3. Measurement samples for the ultra-low noise N5507A LOAbout “mmW application”:Phase noise measurements above 26.5 GHz can be done by using external harmonic mixers (such as Keysight 11970 Series) and a power divider (splitter) with E5053A LO and IF terminals. The E5052B’s mmW application software sets up appropriate LO frequencies for the harmonic mixers.Figure 10-4. System set-up for harmonic mixers (E5053A + E5052B)Harmonic mixerHarmonic mixerLO3 to 10 GHz, 50 MHz step +16 dBm up to 6 GHz +10 dBm up to 10 GHzIF gain0 to 35 dBTo E5052B RF2 InTo E5052B RF1 InBias1Bias2 IF1IF2LO2LO1mmWave sourcex Nx NRFRFPower dividerTable 10-2-H. Frequency band example of phase noise measurement with mmW harmonic mixers11970A 26.5 to 40 GHz 811970Q 33 to 50 GHz 1011970U 40 to 60 GHz 1011970V 50 to 75 GHz 1411970W 75 to 110 GHz 18E5053A Microwave Downconverter Specifications and General Information Summary Table 10-3. E5053A front portsTable 10-4. General informationTable 10-5. Analyzer environmental and dimensionsE5053A Microwave Downconverter Specifications and General InformationSummary – continuedTable 10-6. E5053A LO phase noise performance (dBc/Hz)1 10 100E5052B start frequency = 1 Hz, measurement time = 13 s3 GHz specification – – – -110 -116 -113 -127 -140 -140 -140typical -49 -79 -94 -114 -120 -117 -131 -144 -144 -144 6 GHz specification – – – -104 -110 -109 -123 -140 -140 -140typical -43 -73 -88 -108 -114 -113 -127 -144 -144 -144 10 GHz specification – – – -100 -103 -102 -119 -140 -140 -140typical -39 -69 -84 -104 -107 -106 -123 -144 -144 -144Figure 10-5. E5053A LO phase noise (typical)Figure 10-6. Front viewFigure 10-7. Rear viewFigure 10-8. Side viewWeb SourcesVisit our Signal Source Analyzer Web site for additional product information and literature. /find/ssaPhase noise measurements: /find/phasenoiseRF and microwave accessories: /find/mtaLearn more at: For more information on Keysight Technologies’ products, applications, or services, please contact your local Keysight office. The complete list is available at:/find/contactus。
SB系列砂泵安装使用说明书中文
砂泵安装使用说明书成都西部石油装备有限公司SB系列砂泵安装使用说明书一、SB砂泵概述及性能参数1. 概述SB系列砂泵是针对石油天然气钻探设备特点新研制的配套泵，它采用轴向吸入结构，过流部件为抗磨铸铁，适用于输送腐蚀性带有悬浮颗粒的钻井液或其它类似工况的液体介质，是除砂器、除泥器、混合漏斗最佳配套泵，也是理想的泥浆泵的灌注泵，其参数设计充分考虑了所配套的设备能在最佳工况下工作，主要特点是零件的通用性和互换性强，轴封泄漏少，工作可靠，使用寿命长，维护方便。
SB系列砂泵有五种型号：SB6×8、SB5×6、SB4×5、SB3×4和SB23。
型号SB6×8可配45kW、55kW、75kW电机，根据用户要求有正转泵和反转泵6个规格，该型号已申请外观设计专利，专利号ZL 2007 3 ；型号SB56配22kW、30kW、37kW、45kW电机，常用有反转泵4个规格。
型号SB45配15kW、22kW 电机，常用有反转泵2个规格。
型号SB34配15kW、11kW、电机，常用有反转泵3个规格。
型号SB23配11kW、、电机，常用有反转泵3个规格。
前两种型号的泵其密封件是通用的。
反转泵所有外型及安装尺寸与正转泵基本一样，蜗壳排出管，正转泵在左侧，反转泵在右侧(从吸入端看)。
砂泵SB6×8推荐用于3200m以上钻机配套使用，砂泵SB5×6推荐用于2500m以下钻机配套使用。
SB系列砂泵的密封采用机械密封，该机械密封已申请实用新型专利，专利号ZL 2007 2 。
机封主密封为高耐磨硬质合金机械密封,密封寿命长；辅密封为填料密封，可防止意外事故。
经过使用证明，SB系列砂泵密封可靠，维护方便。
SB系列砂泵轴封采用脂润滑；轴承采用机油润滑，轴承两端的轴承盖上有黄油嘴，轴承也可用黄油润滑。
SB系列砂泵进出口法兰根据国内国外用户的不同采用公制和英制两系列标准尺寸。
SB540_NL中文资料
40
SB520-SB540
20 10 Reverse Current, IR [mA]
SB520-SB540 SB550-SB5100 T A = 100 º C
Forward Current, IF [A]
10
SB580-SB5100
1
SB520-SB540 TA = 75º C
SB550-SB560
90
2
60
1
30
0
0
25
50 75 100 125 Ambient Temperature [ºC]
150
175
0
2
5 10 20 50 Number of Cycles at 60Hz
100
Figure 1. Forward Current Derating Curve
Figure 2. Non-Repetitive Surge Current
(continued)
Typical Characteristics
Average Rectified Forward Current, IF [A]
4
SB520-SB540 SB550-SB5100
Peak Forward Surge Current, IFSM [A]
5
150
120
3
SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.00mm) LOAD LENGTHS
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
AB PF520变频器选型资料
• 安全断开扭矩功能无需切断变频器电源即可移除转动动力。 • 嵌入式安全特性可减少接线，节省安装空间。 • 满足 ISO 13849-1 标准，提供高达 SIL 2/PLd 的安全防护等级。
罗克韦尔自动化出版物 520-TD001C-ZH-E - 2013 年 9 月
5
PowerFlex 520 系列交流变频器技术参数
03 ᮍ/ড䖤㸠
᭄ᄫ䞣݀݅ッ 04
᭄ᄫ䞣䕧ܹッᄤഫ 05/㛝ކ 05
06 ᭄ᄫ䞣䕧ܹッᄤഫ 06+Βιβλιοθήκη 4 V+24 V DC
11
+10 V
+10 V DC 12
0-10 V 䕧ܹ 13
ᢳ䞣݀݅ッ 14
15 4-20 mA 䕧ܹ
C1 RJ45 ሣ㬑ッ
䗮ֵ݀݅ッ C2
⬉ԡ䅵ᖙ乏Ў 1...10 kΩ ᳔ᇣ 2 W
罗克韦尔自动化出版物 520-TD001C-ZH-E - 2013 年 9 月
3
PowerFlex 520 系列交流变频器技术参数
通信
• 借助嵌入式 EtherNet/IP™ 端口，可通过网络方便地配置、控制和收集变频器数据。 ( 仅限 PowerFlex 525 变频器 )
• 双端口 EtherNet/IP 选件卡支持设备级环网 (DLR) 拓扑结构，提供容错连接，可实现最优的变频器 适用性。
BF245B中文资料
1996 Jul 30
5
Philips Semiconductors
BF245A; BF245B; BF245C
MIN. − − − − − 3 − − − − −
TYP. MAX. 4 1.1 1.6 250 40 − 6 1.4 25 700 1.5 − − − − − 6.5 − − − − −
UNIT pF pF pF µS µS mS mS mS µS MHz dB
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VDS VGDO VGSO ID IG Ptot Tstg Tj Note PARAMETER drain-source voltage gate-drain voltage gate-source voltage drain current gate current total power dissipation storage temperature operating junction temperature up to Tamb = 75 °C; open source open drain
4
3 −0.5 V 2 5
1
−1 V −1.5 V
0
0
10
VDS (V)
20
0 −4
−2
VGS (V)
0
VDS = 15 V; Tj = 25 °C.
VDS = 15 V; Tj = 25 °C.
Fig.4
Output characteristics for BF245A; typical values.
SB5B0中文资料
Symbols
SB520
SB530
SB540
SB550
SB560
SB570
SB580
SB590 SB5B0
Units
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length (see Fig. 1) Peak forward surge current, 10mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) at rated TL Maximum instantaneous forward voltage at 5.0A (Note 1) Maximum instantaneous reverse current at rated DC blocking voltage (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range TA=25 TA=100
Mechanical Data
Case: DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.041 ounce, 1.15 grams
B-2205中文资料
FIGURE 2.CIRCUIT FOR COMMON-MODE REJECTIONFIGURE 3.CIRCUIT FOR WAVEFORM INTEGRITYNote:Input to be applied and output to be measured for all dash numbers as shown.N represents highest turns winding in each -STD-1553 TRANSFORMERS© 1996, 1999Data Device CorporationFEATURES•Complete Line of Custom andQPL Units•For Use with MIL-STD-1553Aand B,MacAir A-5690,A-5232,and A-4905•Low Profile•Epoxy Cased,HermeticallySealed•-55°C to +130°C OperatingTemperature Range•Built and Tested to MIL-PRF-21038 and MIL-STD-202Web site:元器件交易网Transceiver T ype 1 (Trapezoidal +5 V/-15 V) BU-61580X1BU-65170X1BUS-61559BUS-61553BUS-65153BUS-65142BUS-63105/25IITransceiver T ype 2 (Trapezoidal +5 V/-12 V) BU-61580X2BU-65170X2BUS-61560BUS-61554BUS-65154BUS-65143BUS-63107/27IITransceiver T ype 3 (Monolithic T rapezoidal +5 V) BU-61580X3BU-65170X3BU-61580X6BU-65170X6Transceiver T ype 3A (Discrete T rapezoidal +5 V) BUS-61561BUS-61555BUS-63147/48Transceiver T ype 5 (Sinusoidal McAir)BU-61590X5BUS-65149BUS-63102Consult Factory For:MIL-PRF-21038 QPL Part Numbers Special MarkingSpecial T estingSpecial PackagingSource InspectionNotes:1.Numbers in parenthesis ( ) reference MIL-PRF-21038 dash numbers.2.For configuration “A”only.See individual specifications for actual values.3.Design parameter only.Not screened in production.ORDER BY BETA PART NUMBER FROM ADDRESS AT THE TOP OF THE PAGE元器件交易网The information in this data sheet is believed to be accurate;however, no responsibility isassumed by Beta T ransformer Technology Corporation for its use, and no licenseor rights are granted by implication or otherwise in connection therewith.Specifications are subject to change without notice.A Subsidiary of Data Device Corporation40 Orville Drive, Bohemia, NY 11716-2529Phone:(631) 244-7393;Fax:(631) 244-8893Web site:J-04/01-500PRINTED IN THE U.S.A.。
269-B中文资料
269-Type 14xx nm Pump Laser Module with Fiber Grating Data Sheet June 2001Offering superior wavelength stability, the 269-type pump laser module with fiber grating is designed as a continuous-wave (CW) optical pump source for erbium-doped fiber ampli-fiers and Raman pump modules.Featuress High-coupled rated output power up to 280 mW, CWs Available with fiber grating for wavelength stability (1420 nm—1510 nm)s Wide environmental ranges Field-proven packaging technologys InGaAsP/InP high-power, strained multiple quan-tum-well (MQW) chip designs Internal thermoelectric cooler (TEC)s InGaAs PIN photodetector back-facet monitors Single-mode and polarization-maintaining fiber pig-tailss Compact, 14-pin butterfly packages Industry compatible package and pinout Applicationss Raman pump modules (RPM)s Erbium-doped fiber amplifiers (EDFA) DescriptionThe 269-type pump laser module with fiber grating represents a family of thermoelectrically cooled, high-power lasers. These modules utilize a fiber Bragg grating to achieve stable wavelength perfor-mance within the 1420 nm to 1510 nm range, over the full operating temperature range. They are designed as continuous-wave (CW) optical pump sources for dense wavelength-division multiplexing (DWDM) EDFA and Raman applications operating in the C- and L-bands. The 269-type laser modules with polarization-maintaining fiber are particularly suitable for use in RPM designs requiring the high-power combinations of multiple pumps.The laser optical spectrum is locked by the fiber grat-ing over a wide optical power range. The optical spectrum is very narrow and the peak wavelength is nearly insensitive to temperature variations and back reflections.The laser modules incorporate a high-power, quan-tum-well laser chip that achieves grating-stabilized fiber powers ranging to 280 mW.An integral thermoelectric cooler (TEC) stabilizes the laser at room temperature and, combined with a her-metic environment, allows the device to achieve high-power operation over the extended temperature range of 0 °C to 75 °C. An internal InGaAs PIN pho-todiode, mounted behind the laser diode, functions as the laser detector and monitors light emissions from the rear facet of the laser.The 269-type module is offered in a 14-pin, hermetic butterfly package.269-Type 14xx nm Pump Laser Module Data Sheet with Fiber GratingJune 20012Agere Systems Inc.Absolute Maximum RatingsStresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.Handling PrecautionsElectrostatic DischargeCAUTION: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take properprecautions during both handling and testing. Follow guidelines such as EIA * Standard EIA 625.Agere Systems Inc. employs a human-body model (HBM) for ESD-susceptibility testing and protection-design eval-uation. ESD voltage thresholds are dependent on the critical parameters used to define the model. A standard HBM (resistance = 1.5 k Ω, capacitance = 100 pF) is widely used and, therefore, can be used for comparison pur-poses. The HBM ESD withstand voltage established for the 269-type laser pump module is ±500V .* EIA is a registered trademark of The Electronic Industries Association.ParameterSymbol Min Max Unit Operating Case T emperature Range T C 075°C Storage Case T emperature Range T stg –4085°C Laser Forward Bias (TEC on):P O = 120 mW—150 mW P O = 160 mW—210 mW P O = 220 mW—280 mW I F———100015001900mA mA mA Laser Reverse VoltageV R —2V Photodiode Reverse Voltage V RMON —20V TEC Current I TEC — 2.2A TEC VoltageV TEC — 5.0V T emperature Sensor CurrentI TS —5mA Laser Diode Operating Chip T emperatureT LD—40°CData Sheet 269-Type 14xx nm Pump Laser ModuleJune 2001with Fiber Grating3Agere Systems Inc.Electrical/Optical CharacteristicsTable 1. Electrical/Optical Characteristics (All performance parameters are specified for I F , OP , T SET = 25 °C,T CASE ~ 25 °C, unless otherwise specified.)ParameterSymbol ConditionsMin Typ Max Unit Operating Optical Power P O —120—280mW Wavelength:T arget Wavelength Center Wavelength λt λC —0 °C—70 °C1420λt – 1.5——1510λt + 1.5nm nm RMS Spectral Width∆λP O—— 1.5nmBOL Operating Laser Forward Current:P O = 120 mW P O = 130 mW P O = 140 mW P O = 150 mWI F , OP BOL————————————550600600600mA mA mA mABOL Operating Laser Forward Current:P O = 160 mW P O = 170 mW P O = 180 mW P O = 190 mW P O = 200 mWI F , OP BOL———————————————650700700750800mA mA mA mA mABOL Operating Laser Forward Current:P O = 210 mW P O = 220 mW P O = 230 mW P O = 240 mW P O = 250 mW P O = 260 mW P O = 270 mW P O = 280 mWI F , OP BOL————————————————————————85090095010001000110011001100mA mA mA mA mA mA mA mA EOL Operating Laser Forward Current I F , OP EOL ——— 1.15 xI F , OP BOLmA EOL Laser Diode Forward Voltage V RI F , OP EOL— 2.3 3.0V Polarization Extinction RatioPER—13——dBTable 2. Monitor Photodiode Characteristics (All test parameters are specified for I F , OP , T SET = 25 °C,T CASE ~ 25 °C unless otherwise specified.)ParameterSymbol Conditions Min Max Unit Monitor Diode CurrentI BF —2002000µA Monitor Diode Dark CurrentI DV R = –5 V , I F = 0—100nA269-Type 14xx nm Pump Laser Module Data Sheet with Fiber GratingJune 20014Agere Systems Inc.Electrical/Optical Characteristics (continued)Table 3. TEC and Thermistor Characteristics (All performance parameters are specified for I F , OP , T SET = 25 °C,unless otherwise specified.)ParameterSymbol Conditions Min Max Unit TEC Current:P O = 120 mW P O = 130 mW P O = 140 mW P O = 150 mW I TECT SET = 25 °C;T CASE = 75 °C;∆T = 50 °C, EOL———— 1.61.61.61.6A A A A TEC Current:P O = 160 mW P O = 170 mW P O = 180 mW P O = 190 mW P O = 200 mW I TECT SET = 25 °C;T CASE = 70 °C;∆T = 45 °C, EOL————— 1.71.71.71.71.7A A A A A TEC Current:P O = 210 mW P O = 220 mW P O = 230 mW P O = 240 mW P O = 250 mW P O = 260 mW P O = 270 mW P O = 280 mW I TECT SET = 25 °C;T CASE = 65 °C;∆T = 40 °C, EOL———————— 2.02.02.02.02.02.02.02.0A A A A A A A A TEC Voltage:P O = 120 mW P O = 130 mW P O = 140 mW P O = 150 mW V TECT SET = 25 °C;T CASE = 75 °C;∆T = 50 °C, EOL———— 3.53.53.53.5V V V V TEC Voltage:P O = 160 mW P O = 170 mW P O = 180 mW P O = 190 mW P O = 200 mW V TECT SET = 25 °C;T CASE = 70 °C;∆T = 45 °C, EOL————— 3.73.73.73.73.7V V V V V TEC Voltage:P O = 210 mW P O = 220 mW P O = 230 mW P O = 240 mW P O = 250 mW P O = 260 mW P O = 270 mW P O = 280 mWV TECT SET = 25 °C;T CASE = 65 °C;∆T = 40 °C, EOL———————— 4.24.24.24.24.24.24.24.2V V V V V V V V Thermistor Resistance R THERM25 °C Laser Diode Set T emperature9.510.5k ΩThemistor B ConstantB—37004100KData Sheet 269-Type 14xx nm Pump Laser ModuleJune 2001with Fiber Grating 5Agere Systems Inc.User Information*A positive input into this pin cools the laser.Fiber CharacteristicssLength of fiber pigtail:— 1.75 m ± 0.25 msLength of fiber pigtail to end of grating:— 0.86 m ± 0.14 msStandard fiber:— Cladding OD: 125 µm ± 2 µm— Acrylate buffer OD: 250 µm ± 15 µm — Cut off wavelength: <1320 nm sPolarization-maintaining fiber:— P ANDA— Cut off wavelength: <1400 nm — Acrylate buffer: 400 µmTable 4. Pin Information Pin Number Connection1TE Cooler (+)*2Thermistor3Monitor Anode (–Bias)4Monitor Cathode (+Bias)5Thermistor 6No Connect 7No Connect 8No Connect 9No Connect 10Laser Anode (+)11Laser Cathode (–)12No Connect13Package Ground 14TEC Cooler (–)Mounting and ConnectionsCAUTION:This device is susceptible to damage asa result of electrostatic discharge. Proper precautions should be taken during both handling and testing.The base of the laser module (see Outline Diagram) should be maintained at or below 75 °C (maximum) during operation. Interfaces between the laser module base and heat sink must be clean, and the use of a thermal filler may be necessary.Mounting InstructionsThe minimum fiber bend radius is 1.0 in.T o avoid degradation in performance, mount the mod-ule on the board as follows:1.Place the bottom flange of the module on a flat heat sink at least 0.5 in. x 1.180 in. (12.7 mm x 30 mm) in size. The surface finish of the heat sink should be better than 32 µin. (0.8 µm), and the surface flat-ness must be better than 0.001 in. (25.4 µm). Using thermal conductive grease is optional; however, thermal performance may be improved if conductive grease is applied between the bottom flange and the heat sink.2.Mount four #2-56 screws with Fillister heads (M2-3 mm) at the four screw hole locations (see Outline Diagram). The Fillister head diameter must not exceed 0.140 in. (3.55 mm). Do not apply more than 1 in./lb. of torque to the screws.Figure 1. Circuit Schematic1-675 (F).h7654321891011121314TH 10 k ΩTEC–++–269-Type 14xx nm Pump Laser Module Data Sheet with Fiber GratingJune 20016Agere Systems Inc.Outline DiagramDimensions are in inches and (millimeters).1-1065 (F)a0.10 (0.25)0.035(0.91)0.078(1.98)0.213 (5.40) TYP.0.350(8.89)0.500(12.70)0.598(15.19)MAX.1.025(26.04)0.020(0.51)0.100 (2.54) TYP.TYP.PIN 10.105 (2.667) DIA.TYP. (4) PLACESPIN 140.030 (0.76)0.700(17.78)0.347(8.8)0.820(20.83)0.180(4.57)0.175(4.45)0.215(5.46) 1.180(29.97)0.078(1.99)0.178(4.52)0.215 ± 0.10(5.46 ± 2.54)0.363(9.23)0.334 ± 0.005(8.49 ± 0.005)Data Sheet 269-Type 14xx nm Pump Laser ModuleJune 2001with Fiber Grating7Agere Systems Inc.Laser Safety InformationClass IIIb Laser ProductFDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser Safety requirements. All versions are Class IIIb laser products per IEC * 60825-1:1993. The device has been classified with the FDA under accession number 8720010.This product complies with 21 CFR 1040.10 and 1040.11.8.8 µm/125 µm single-mode fiber pigtail (see Fiber Characteristics, page 5).Wavelength = 1.40 µm—1.52 µm.Maximum power = 400 mW.Because of size constraints, laser safety labeling (including an FDA Class IIIb label) is not affixed to the module but attached to the outside of the shipping carton.Product is not shipped with power supply.Caution:Use of controls, adjustments, and procedures other than those specified herein may result inhazardous laser radiation exposure.* IEC is a registered trademark of The International Electrotechnical Commission.DANGERINVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Avoid direct exposure to beam Do not view beam directly with optical instrumentsINVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTORAvoid exposure to beamClass 3B Laser Product IEC-60825M 1993;Max. Output: 400 mW;Wavelength: 1.40 µm—1.52 µm269-Type 14xx nm Pump Laser Module Data Sheet with Fiber GratingJune 2001For additional information, contact your Agere Systems Account Manager or the following:INTERNET: E-MAIL:docmaster@ N. AMERICA:Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, P A 18109-32861-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)ASIA P ACIFIC:Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256Tel. (65) 778 8833, FAX (65) 777 7495CHINA:Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao T ower, 88 Century Boulevard Pudong, Shanghai 200121 PRCTel. (86) 21 50471212, FAX (86) 21 50472266JAP AN:Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, T okyo 141, JapanTel. (81) 3 5421 1600, FAX (81) 3 5421 1700EUROPE:Data Requests: DA T ALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148T echnical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.Copyright © 2001 Agere Systems Inc.All Rights ReservedJune 2001DS01-228OPTOOrdering InformationDevice Code InformationORDER CODE:X X269 – – XX – XXXX – BASIC P ART NUMBER FIBERA = NONISOLA TED, SMF CONNECTOR OPTIONS OPERA TING POWER XX0 mWA = NO CONNECTORB = NONISOLA TED, PMFB = SC/APC C = FC/APC WAVELENGTH XXXX nm。
SB550中文资料
10
Tj = 125°C
1000
SB520 - SB540
1.0
Tj = 100°C
SB550 - SB560
0.1
Tj = 75°C
0.01
Tj = 25°C
100 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance
1. Measured at ambient temperature at a distance of 9.5mm from case. 2. Short duration test pulse used to minimize self-heating effect. 3. Thermal resistance junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length.
0.67 25
V mA °C/W
Typical Thermal Resistance Junction to Ambient (Note 1) (Note 3) Operating Temperature Range Storage Temperature Range
-65 to +150
°C
Notes:
DS23024 Rev. 6 - 2
3 of 3
SB520 - SB560
A
B
A
C
D
DO-201AD Dim Min 25.40 7.20 1.20 4.80 Max ¾ 9.50 1.30 5.30 A B C D
Mechanical Data
B-52BB 流量计系列产品说明书
B-52BBAssemblies come with:ߜMicrometer Valve forPrecise Flow Control ߜHorizontal Connectionswith Lock Nuts for Panel Mounting ߜPTFE, Glass, andViton ®Construction for Broad Media Compatibility ߜPolycarbonateShield for Use in Pressurized SystemsThe entire line of shielded lab rotameters is available with micrometer valves for precise,reproducible flow control. Control the flow of air from 0.02 to 77,000 cc/min,(water from 0.0002 to 1900 cc/min).Flow ranges may be extended to 2 to 3 times by using heavier floats.SPECIFICATIONSValve:PTFE, Viton ®and glass wetted parts End Fittings:PTFE Max. Temp:Water:82°C (180°F)Other Fluids:93°C (200°F)For 5-point NIST calibration certificate add “-NIST” to model number and $225.*For stainless steel floats, multiply gas ranges by 1.78 and water ranges by 2.14 (not supplied for FL-320 or FL-220).Ordering Example: FL-220, rotameter with 0.2 to 90 cc/min (air) range, $432.FL-220Starts at$424Panel lock nut.High-clarity polycarbonate shield.Tubing and Fittings Available.See Section T.SS float included with most models.Precision micrometer valve.FL-120, $491, shown smaller than actual size.PRECISION ROTAMETER ASSEMBLIESCapacities: 0.0002 to 1900 cc/min of Water0.02 to 77,000 cc/min of AirNPT thread.CANADA www.omega.ca Laval(Quebec) 1-800-TC-OMEGA UNITED KINGDOM www. Manchester, England0800-488-488GERMANY www.omega.deDeckenpfronn, Germany************FRANCE www.omega.frGuyancourt, France088-466-342BENELUX www.omega.nl Amstelveen, NL 0800-099-33-44UNITED STATES 1-800-TC-OMEGA Stamford, CT.CZECH REPUBLIC www.omegaeng.cz Karviná, Czech Republic596-311-899TemperatureCalibrators, Connectors, General Test and MeasurementInstruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References,Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes andAssemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, WirePressure, Strain and ForceDisplacement Transducers, Dynamic Measurement Force Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, PressureReference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators,Strain Gages, Torque Transducers, ValvespH and ConductivityConductivity Instrumentation, Dissolved OxygenInstrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis InstrumentationHeatersBand Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and SwitchingDevices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular HeatersFlow and LevelAir Velocity Indicators, Doppler Flowmeters, LevelMeasurement, Magnetic Flowmeters, Mass Flowmeters,Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding FlowmetersData AcquisitionAuto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data LoggersPlug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers。
贝利默 B250 钢铁球型阀门数据表说明书
B250•ApplicationStainless Steel Ball and StemType overviewType DN B25050Technical dataFunctional dataValve size [mm]2" [50]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 400 psi Close-off pressure ∆ps 200 psiFlow characteristic equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0% for A – AB Controllable flow range 75°Cv57 No Characterized Disc TRUECv Flow RatingA-port: as stated in chart B-port: 70% of A – AB CvMaterials Valve body Nickel-plated brass body Spindle stainless steel Spindle seal EPDM (lubricated)SeatPTFECharacterized disc No Disc (full flow)Pipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuators Non-Spring ARB(X)SpringAFRB(X)Safety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable flow.B250 Flow/Mounting detailsTwo-way valves should be installed with thedisc upstream.DimensionsType DNB25050ARB, ARXA B C D E F H1H210.0" [254] 4.2" [107] 6.9" [175] 5.5" [140] 1.7" [44] 1.7" [44] 1.2" [30]0.6" [15]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 4.2" [107]9.8" [249]7.6" [194] 3.1" [80] 3.1" [80]ARQB, ARQXA B C D E F H1H29.9" [251] 4.2" [107]7.5" [191] 6.1" [155] 2.3" [58] 2.3" [58]0.8" [20]0.6" [15]B250AFRB, AFRXA B C D E F10.8" [275] 4.2" [107]9.5" [241]8.1" [206] 2.0" [51] 2.0" [51]AFRB N4, AFRX N4A B C D E F13.0" [330] 4.2" [107]10.3" [262]9.3" [235] 3.4" [86] 3.4" [86]AFRX24-MFTModulating, Spring Return, 24 V, Multi-Function Technology®Technical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 Hz Power consumption in operation 7.5 W Power consumption in rest position 3 WTransformer sizing 10 VA (class 2 power source)Electrical Connection18 GA appliance or plenum cables, 3 ft [1 m], 10 ft [3 m] or 16ft [5 m], with or without 1/2" conduit connectorOverload Protectionelectronic throughout 0...95° rotation Functional dataOperating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for PWM, On/Off and Floating point Operating range Y variable Start point 0.5...30 V End point 2.5...32 VOptions positioning signal variable (VDC, PWM, on/off, floating point)Position feedback U 2...10 V Position feedback U note Max. 0.5 mA Position feedback U variable VDC variable Direction of motion motor selectable with switchDirection of motion fail-safe reversible with cw/ccw mounting Manual override 5 mm hex crank (3/16" Allen), supplied Angle of rotation 90°Running Time (Motor)150 s / 90°Running time motor variable 70...220 s Running time fail-safe <20 s @ 20°C Angle of rotation adaptation off (default)Noise level, motor 45 dB(A)Noise level, fail-safe 62 dB(A)Position indicationMechanical Safety dataDegree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and2014/35/EU; Listed to UL 2043 - suitable for use in air plenums per Section 300.22(c) of the NEC and Section 602.2 of the IMC Quality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]AFRX24-MFTFootnotesSafety dataStorage temperature -40...176°F [-40...80°C]Ambient humidity Max. 95% RH, non-condensing Servicingmaintenance-freeMaterialsHousing material Galvanized steel and plastic housing†Rated Impulse Voltage 800V, Type of action 1.AA, Control Pollution Degree 3AccessoriesGatewaysDescriptionType Gateway MP to BACnet MS/TP UK24BAC Gateway MP to Modbus RTU UK24MOD Gateway MP to LonWorksUK24LON Electrical accessoriesDescriptionType Service Tool, with ZIP-USB function, for programmable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH USService toolsDescriptionTypeConnection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connectionZK4-GEN Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationINSTALLATION NOTESActuators with appliance cables are numbered.Provide overload protection and disconnect as required.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hotconnection of the controller. Position feedback cannot be used with a triac sink controller; theactuator internal common reference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators may be controlled in parallel. Current draw and input impedance must be observed.Master-Slave wiring required for piggy-back applications. Feedback from Master to controlinput(s) of Slave(s).Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.AFRX24-MFT Wiring diagramsOn/Off Floating PointVDC/mA Control PWM ControlOverride Control Master - Slave。
DHB Sonic Series 542-522rev 产品说明书
542-522rev &_EN Printed in USA /1 © 201LIMITED WARRANTYThis product is warranted to be free from defects in material and/or workmanship for a period of one (1) year from date of original installation (with the exception of racks, pans, and covers). Any component which proves to be faulty in material and/or workmanship will be replaced or repaired (at the option of Prince Castle, LLC) without cost to the customer for parts or labor. This warranty covers on location service (i.e. trip charges and/or mileage). Travel mileage is limited to 100 miles (200 kilometers -International) round trip (one trip warranty) from an authorized service agency or its sub-service agency.This warranty is subject to the following exceptions/conditions:•Use of any non-genuine Prince Castle parts voids this warranty.•All labor shall be performed during regular work hours. Overtime premium will be charged to the buyer.•Damage caused by carelessness, neglect, and/or abuse (e.g., dropping,tampering or altering parts, equipment damaged in shipment, by fire, flood or an act of God) is not covered under this warranty.TABLE OF CONTENTSProduct Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 – 14Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Exploded View and Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 – 15205 Lies Road • Carol Stream, IL 60188 USATelephone: 630-462-8800 • Toll Free: 1-800-PCASTLEFax: 630-462-1460 • Printed in USA 10/13 © 20132542-522rev C _ENProduct Holding Bin DHB Sonic SeriesModelVoltageWatts Hertz DHB2SS-33SNC 208-240V AC 250050/60DHB2SS-33SNCFR 208-240V AC 250050/60DHB4SS-20SNC 120V AC 170060DHB4SS-20SNCGR 120V AC 170060DHB2SS-20SNC120V AC90060InstallationA.Remove the unit from the carton and inspect for signs of damage. If there is damage to the unit:•notify the carrier within 24 hours of delivery•save carton and packaging materials for inspection purposes•contact your local dealer, or if purchased directly, the Prince Castle Sales Department at 800-722-7853 or 1-630-462-8800 to arrange for a replacement unit.NOTE: When installing this unit, the ambient temperature at the mounting site should not exceed 100°F .B.Place the bin on a counter and seal the base to the counter with food-approved sealant.C.Plug the power cord into the bin and connect the plug into the proper electrical outlet (15 amp, 120 V AC (4SS), 208-240 V AC (2SS)). All connections must be in accordance with local electrical codes and any other applicable codes.NOTE: The electrical receptacle should be a dedicated outlet. No other equipment should be operating on the line (refrigerators, fryers, etc.).D.Install the racks, pans and pan covers into the cavities.E.Turn the power switch to ON. Allow 30 minutes for warm-up.Prince Castle reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.542-522rev C _EN 3Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic SeriesOperationPrinted in USA 10/13 © 20134542-522rev C _ENProduct Holding Bin DHB Sonic SeriesCleaning542-522rev C _EN 5Printed in USA 10/13© 2013Product Holding Bin DHB Sonic SeriesSetting the TemperatureTEMPERATURE DISPLAYNOTE: The unit is preset to display temperature in Fahrenheit. To display in Celsius, press and hold the DOWN Arrow button immediately after turning on the power switch. To switch back to Fahrenheit, press and hold the UP Arrow button after turning on the power switch.UP/DOWN ARROW BUTTONSUsed with other buttons to scroll through heater and temperature selections.Printed in USA 10/13 © 20136542-522rev C _ENProduct Holding Bin DHB Sonic SeriesSelecting Breakfast and Regular Menus542-522rev C _EN 7Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic SeriesProgramming the MenusChanging the Hold and Cook-More TimesPrinted in USA 10/13 © 20138542-522rev C _ENProduct Holding Bin DHB Sonic SeriesSetting the Alternating Display Interval542-522rev C _EN 9Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic SeriesChanging Product NamesPrinted in USA 10/13 © 201310542-522rev C _ENProduct Holding Bin DHB Sonic SeriesA.Press and release the MENU/ENTER button to enter the Set V olume menu.B.The display shows SET VOL 0 ✁ ENTR. This shows that the volume is currently turned off.The volume may be set for V ol 0 (off) or for volume levels V ol 1 through V ol 3.23A.To change the volume level, use the UP or DOWN Arrow button to scroll to the desired level. When the desired selection is displayed, press the MENU/ENTER button.B.Press and release the PRINCE CASTLE LOGO button at any time to exit the Program Mode and return to the Run Mode.NOTE: If the MENU/ENTER button has not been pressed to save any changes, the program will revert to the original time.Set Bar Position 4-Shelf UnitTo check the current position setting on the main timer bar without making a change, press and hold the LOGO and the DOWN buttons simultaneously. On the aux timer bar, press and hold the LOGO button only.One of the displays will show POS X to indicate the current position setting, where X is the setting.4542-522rev C _EN 11Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic SeriesTimer Bar Positions on BinsDHB4SS-20SNC/DHB4SS-20SNCGRFour cavity bin with two 4-channel timer bars:Timer Bar Position A, Address 1Timer Bar Position B, Address 2Bar AddressTo check the bar address on the main timer bar, press and hold the LOGO button and the DOWN Arrow simultaneously. On the aux bar press and hold the LOGO only button. The bar address is shown as BARy as on other bars where y is the address.The Timer Bar address is automatically set when the Bar Position is selected as follows:The address can be changed at power on as on other bars, but loading presets will change the address back to the default in the list above. Loading presets will not change the selected position.Position Address DefaultA B12PROBLEMPROBABLE CAUSE SOLUTIONDisplay flashes Opn and rEL .Open relay. Circuit inoperable.Consult an authorized Service Technician.Display flashes SHr and rEL .Shorted relay. Circuit inoperable.Open heater.Unplugged ribbon cable between power and main circuit boards.Consult an authorized Service Technician.Display flashes Opn and rEL .Temperature is below 75°F.Heater inoperable.Probe inoperable.Relay inoperable.Consult an authorized Service Technician.Display shows HHH for an extended period of time and heater surface temperature is hot.Temperature is above 300°F (abnormal operation).Consult an authorized Service Technician.Display shows HHH for an extended period of time and heater surface temperature is cool.Probe is inoperable.TroubleshootingPrinted in USA 10/13 © 201312542-522rev C _ENProduct Holding Bin DHB Sonic SeriesRef.Part No.Description1542-154Upper Heater Assy Kit 2542-153S Lower Heater Assy Kit 3541-723E4S Lid4542-169S Rack Kit 5541-1095S Pan6541-1189S Main Timer Bar Kit 7541-719SDisplay PCBRef.Part No.Description8541-1183S Main PCB (541-1285S DHB2SS-20SNC)978-233S Lighted Rocker Switch 1088-609S Power Inlet Connector Kit (541-1285S DHB2SS-20SNC)1172-200-15S Power Cord Kit12197-232S Rubber Foot (Pkg of 4)1388-709-2-11S Speaker Kit14741-650SAudio PCB Interface Assy89111371412122121235412610542-522rev C _EN 13Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic Series3437128106911131422125Printed in USA 10/13 © 201314542-522rev C _ENProduct Holding Bin DHB Sonic SeriesDHB4SS-20SNC542-522rev C _EN 15Printed in USA 10/13 © 2013Product Holding Bin DHB Sonic SeriesWiring Diagrams (continued)DHB2SS-33SNC/DHB2SS-20SNCPrinted in USA 10/13 © 201316542-522rev C_EN205 Lies Road • Carol Stream, IL 60188 USA Telephone: 630-462-8800 • Fax: 630-462-1460Toll Free: 1-800-PCASTLE Printed in USA 10/13 © 2013Prince Castle LLC.Printed in USA 10/13 © 201318542-522rev C_EN。
RYOBI 520X 520HX说明书
– 1.0 mm (–0.039") by front lay
(4) Slitter wheel
Specifications
RYOBI 520X
RYOBI 520HX
Dampening System
Molleton
RYOBI-matic Continuous Dampening System
Max. Paper Size (W x L) 520 x 375 mm (20.47" x 14.76")
backward)
(between offset press and NP Unit)
(2) Nylon plate holder, small-size. 33 x 44 mm (1.3" x 1.7")
(7) Roller type delivery guide (for NP unit)
(3) Cylinder-type nylon plate holder: 505 x 345 mm (19.7" x 13.5") (8) Static eliminator
Standard Equipment
(1) Repeat numbering function
(9) Cross perforator
1 set
(2) Powder spray device
(10) Nylon plate holder, large-size, 95 x 130 mm
(3) A set of built-in positioning scales
4 (form rollers: 1)
Gripper Margin
9– 1mm (0.354"–0.039")
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SB520 - SB560
5.0A SCHOTTKY BARRIER RECTIFIER
Features
Maximum Ratings and Electrical Characteristics
@ T A = 25°C unless otherwise specified
·Epitaxial Construction
·Guard Ring Die Construction for Transient Protection ·Low Power Loss, High Efficiency ·High Surge Capability
·High Current Capability and Low Forward Voltage Drop ·Surge Overload Rating to 150A Peak
·For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications ·
Lead Free Finish,RoHS Compliant (Note 4)
Mechanical Data
·Case: DO-201AD
·Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish ¾Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208·Polarity: Cathode Band ·Mounting Position: Any
·Ordering Information: See Last Page ·Marking: Type Number
·
Weight: 1.1 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%.
Notes: 1. Measured at ambient temperature at a distance of 9.5mm from case.
2. Short duration test pulse used to minimize self-heating effect.
3. Thermal resistance junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length.
4.RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
0.01
0.1
10
1.0
I ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A )
F V ,INSTANTANEOUS F0RWARD VOLTAGE (V)Fig.3Typical Forward Characteristics,SB550&SB560
F 100
0.2
0.4
0.6
0.8
1
10
100
I ,P E A K F O R W A R D S U R G E C U R R E N T (A )
F S M NUMBER OF CYCLES AT 60Hz
Fig.4Max Non-Repetitive Peak Fwd Surge Current
30
60
90
120
150
C ,T O T A L C A P A C I T A N C E (p F )
T V ,REVERSE VOLTAGE (V)Fig.5Typical Total Capacitance
R 100
1000
3000
0.1
1.0
10
100
0.01
0.1
1.0
10
100
I ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A )
F 0
V ,INSTANTANEOUS FORWARD VOLTAGE (V)Fig.2Typical Forward Characteristics,SB520-SB540
F 0.2
0.4
0.6
0.8
25
50
75
100
125
150
I A V E R A G E F O R W A R D C U R R E N T (A )
F (A V ),T ,LEAD TEMPERATURE (C)Fig.1Forward Current Derating Curve
L °1
2
4
5
3
0816243240
I ,I N S T A N T A N E O U S R E V E R S E C U R R E N T (m A )
R V INSTANTANEOUS,REVERSE VOLTAGE (V)R ,Fig.6Typical Reverse Characteristics,SB520-SB540
100
101.0
0.1
0.01
0.001
Notes: 5. For packaging details, visit our website at /datasheets/ap02008.pdf
01020
60
V ,INSTANTANEOUS REVERSE VOLTAGE (V)Fig.7Typical Reverse Characteristics,SB550&SB560
R 1000
Ordering Information
(Note 5)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein.Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein;neither does it convey any license under its patent rights,nor the rights of others.The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.。