TCL300DL3-ADTD中文资料
《D电视使用说明》PPT课件
第三步：使用3D眼睛，将眼镜上的3D开关打开。此时3D眼睛的红色指示灯会亮一 下。表示3D眼睛开始工作。
第四步：如果此时3D效果不明显，使用3D眼睛上的左右眼切换按钮。
如果用户输入给电视的图像信号很弱，例如在TV状态下，用户的电视信号很弱， 导致图像很模糊，这个时候由于图像信号的信噪比太低，电视芯片无法提取到图 像的层次信息，这个时候将无法使用2D转3D功能。
L65P10FE3D电视3D功能的使用
L65P10FE3D的3D成像原理不同。是采用分光法来实现3D效果，因此不需要3D 发射器。眼镜是圆偏振片眼睛。和电影院的3D眼镜一样。
3D功能的使用方法 电视在2D状态下播放3D片源（USB、播放器、蓝光DVD、PS3 等HDMI接入） 按遥 控器上的“3D”键进入3D模式选择片源格式（按上面提到过的片源格式分类来先 择）带上偏振3D眼镜观看3D如果3D效果不明显或感觉有些晃眼，使用遥控器调 整左右眼顺序。
3、L55X11FE3D /L46X11FE3D
(主推)
4、L65P10FE3D
(国庆上市)
其中TD-42F已经停产，主要用在商用途径，比如机场，酒店，卖场等等。是 我司最早的3D电视。
L55X10FBDE3D是与今年5月上市的型号，生产数量不多，也是采用，主动快门 眼睛的方法实现3D效果。目前也已经停产。
完成
连接单 元
插入电 视顶部 的接口
接连将 起接发 来单射
元单 连元
第三步：进入3D模式。（如果第一次插入3D发射器时，电视屏幕会提 示进入3D模式，选择“是”）除此之外，用遥控器进入3D模式。
进入３Ｄ模式后，３Ｄ发射器上的红色指示灯会被点亮。
按下3D键进入 3D菜单，此时 电视机上面的 3D发射器的指 示灯也会点亮
TCL综合布线产品手册new资料
TCL智能楼宇事业部5产品技术手册 (5)1.1企业介绍 (7)1.2生产设备 (11)1.3产品检测设备 (13)1.4公司产品的特点和定位 (15)1.5 TCL非屏蔽综合布线产品的特点及应用 (16)1.5.1工作区产品 (16)1、信息插座面板 (16)（1）产品特点： (16)（2）产品使用指南 (16)（3）产品安装指南 (20)2、信息插座 (21)2.1(1)产品类别： (21)（2）产品特点： (21)（3）产品应用指南： (22)2.2(1)产品类别： (22)（2）产品特点： (22)（3）产品应用指南： (23)2.3(1)产品类别： (23)（2）产品特点： (23)（3）产品应用指南： (24)2.4语音模块 (24)TCL信息插座的应用： (25)TCL信息插座的施工： (25)1.5.2水平布线子系统产品 (26)1、超五类水平线缆 (26)（1）产品类别： (26)（2）产品特点： (26)（3）产品应用指南： (27)（4）施工指南： (27)2、六类水平线缆 (28)(1)产品类别 (28)（2）产品特点： (28)（3）产品应用指南： (29)（4）施工指南： (29)1.5.3干线子系统、建筑群干线子系统产品 (30)1、25对大对数线缆 (30)（1）产品类别 (30)（2）产品特点： (30)（3）产品应用指南： (30)2、50对大对数线缆 (31)（1）产品类别 (31)（2）产品特点： (31)（3）产品应用指南： (32)1.5.4管理区产品 (32)1、24口RJ45模块式配线架 (32)（1）产品类别： (32)（2）产品特点： (32)（3）产品应用指南： (33)（4）订货说明： (33)2、超五类110打线式配线架 (33)产品特点 (33)3、110型配线架 (34)（1）产品类别： (34)（2）产品使用指南： (34)（3）产品应用指南： (37)4、接插软线（跳线） (38)4.1 RJ45超五类跳线： (38)(1)产品类别 (38)（2）产品特点： (38)4.2六类RJ45跳线 (39)(1)产品类别； (39)（2）产品特点： (39)接插软线（跳线）应用指南： (40)5、理线器 (41)（1）产品类别： (41)（2）产品特点： (41)（3）产品应用指南： (42)1.5.5设备间、交接间产品 (43)（1）产品类别： (43)（2）产品特点： (43)1.5.6金属地面信息插座面板 (45)（1）产品类别： (45)（2）产品特点： (45)（3）产品使用指南： (45)1.6 TCL屏蔽综合布线产品的特点及应用 (46)六类屏蔽双绞线： (46)产品特点： (46)超五类屏蔽双绞线： (47)产品特点： (47)（3）六类24口屏蔽配线架 (47)产品特点： (47)（4）超五类24口屏蔽配线架 (48)产品特点： (48)（5）六类屏蔽RJ45信息模块 (49)产品特点： (49)（6）超五类屏蔽RJ45信息模块 (50)产品特点： (50)（7）六类屏蔽RJ45跳线 (51)产品特点： (51)（8）超五类屏蔽RJ45跳线 (52)产品特点： (52)TCL屏蔽布线系统应用指南： (53)1.7 TCL光系列、全光纤布线系统产品 (54)1、光缆 (54)室内光缆 (54)（1）产品类别： (54)（2）产品特点： (55)（3）产品应用指南： (55)室外光缆 (55)（1）产品类别： (55)（2）产品特点： (55)（3）产品应用指南： (56)2、光纤跳线 (57)（1）产品类别： (57)（2）产品特点： (57)3、光纤尾纤 (58)（1）产品类别： (58)（2）产品特点： (58)TCL光跳线、光纤尾纤应用指南： (59)4、光纤配线架 (60)（1）产品特点： (60)产品使用指南： (61)5、光纤适配器 (62)（1）产品特点： (62)产品应用指南： (64)6、光纤桌面盒 (64)产品特点及应用： (64)1. 8智能家居布线产品 (65)基本型多媒体布线箱 (65)1.8.1(1)产品类别： (65)（2）产品功能： (65)（3）产品功能件说明： (65)小康型多媒体布线箱 (67)1.8.2(1)产品类别： (67)（2）产品功能： (67)（3）产品功能件说明 (67)豪华型多媒体布线箱 (69)1.8.3(1)产品类别： (69)（2）产品功能： (69)（3）产品功能件说明： (69)产品应用指南： (71)TCL智能楼宇事业部产品技术手册二00四年三月十日1.2生产设备1.3产品检测设备1.4公司产品的特点和定位1.5 TCL综合布线产品的特点及应用1.5.1工作区产品1.5.2水平布线子系统产品1.5.3干线子系统、建筑群干线子系统产品1.5.4管理区产品1.5.5设备间、交接间产品1.5.6金属地面信息插座面板1.6 TCL屏蔽综合布线产品的特点及应用1.7 TCL光系列、全光纤布线系统产品1.8智能家居布线产品TCL集团股份有限公司创办于1981年，是一家从事家电、信息、通讯、电工产品研发、生产及销售，集技、工、贸为一体的特大型国有控股企业。
TD300中文资料
TD30015V TRIPLE IGBT/MOS DRIVERJune 1998®.THREE POWER IGBT/MOS OR PULSE TRANSFORMER DRIVERS.CURRENT SENSE COMPARATOR WITH 1ms INHIBITION TIME FUNCTION.INSTANTANEOUS SIGNAL TRANSMISSION .0.6 Amp PER CHANNEL PEAK OUTPUT CURRENT CAPABILITY.LOW OUTPUT IMPEDANCE TYP : 7Ω at 200mA.CMOS/LSTTL COMPATIBLE INVERTING IN-PUT WITH HYSTERESIS.13V TO 16V SINGLE SUPPLY OPERATION .UNDER VOLTAGE LOCKOUT (12.5V).CURRENT AMPLIFIER.LOW BIAS CURRENT TYP : 1.5mA.DURING POWER UP NO RANDOM OUTPUT STATE.ENHANCED LATCH-UP IMMUNITY .CHANNEL PARALLELING CAPABILITYDESCRIPTIONThe TD300 is designed to drive one, two or three Power IGBT/MOS and has driving capability for pulse transformer. So it is perfectly suited to inter-face control IC with Power Switches in low side or half-bridge configuration.The typical application shown figure 1 implements the TD300 in a pulse controlled half-bridge drive.Positive and negative pulses are applied to the pulse transformer to charge and discharge the IGBT/MOS gate capacitance. More sophisticated secondary circuits provide low impedance gate drive and short-circuit protection as shown in appli-cation note AN461.On Figure 2, TD300 is implemented as a low side driver in a typical 3 phase motor drive.Figure 3 presents a general purpose low side gate drive.In both case, the current amplifier provides inter-facing between a sense resistor and an A/D converter.PIN CONNECTIONSORDER CODES1/8TD300 ELECTRICAL CHARACTERISTICSV CC = 15V, T amb = 25o C (unless otherwise specified)3/8TD300TIMING DIAGRAM4/8Figure 2 : THREE PHASE MOTOR LOW SIDE DRIVETD300 PACKAGE MECHANICAL DATA14 PINS - PLASTIC DIP7/8TD300PACKAGE MECHANICAL DATA14 PINS - PLASTIC MICROPACKAGE (SO)Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.© The ST logo is a trademark of STMicroelectronics© 1998 STMicroelectronics – Printed in Italy – All Rights ReservedSTMicroelectronics GROUP OF COMPANIESAustralia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.8/8。
3D技术
3D技术目录3D技术简介目前，在全球的电影院里商用化的3D放映技术主要包括主动立体和被动立体两种。
近期，一些公司又推出采用RGB分色技术的光谱立体放映技术（INFITEC）。
3D成像是靠人两眼的视觉差产生的。
人的两眼（瞳孔）之间一般会有8厘米左右的距离。
要让人看到3D影像，就必须让左眼和右眼看到不同的影像，使两副画面产生一定差距，也就是模拟实际人眼观看时的情况。
3D的立体感觉就是如此由来的。
3D摄像机编辑本段TCL3D放映技术主动立体数字放映技术主要设备单台符合DCI技术规范的2K数字放映机，支持主动立体放映的数字电影服务器，普通高增益银幕，液晶眼镜，液晶眼镜同步信号发生器技术原理放映机和播放器通过提高画面刷新率（为2D放映的2倍刷新率），在同一台放映机上播放左右眼画面，通过液晶眼镜的同步开关功能，让左右眼看到不同的画面，产生立体效果。
优点1、设备一次性投入低2、采用普通高增益银幕，不影响2D电影放映3、光利用率相对比其他立体放映技术高（约16%）缺点液晶眼镜的价格较高，目前市场价约为100-800美元一幅，运营成本较高快门式缺点一：眼镜的问题，首先眼镜是需要配备电池的，但是眼镜必须要带着才能欣赏电视节目，那么电池产生电流的同时发射出来的电磁波产生辐射，会诱发想不到的病变。
二：画面闪烁的问题，3D眼镜闪烁的问题，主要体现在主动快门式3D眼镜，目前3D眼镜左右两侧开闭的频率均为50/60Hz，也就是说两个镜片每秒各要开合50/60次，即使是如此快速，用户眼镜仍然是可以感觉得到，如果长时间观看，眼球的负担将会增加。
三：亮度大大折扣，带上这种加入黑膜的3D眼镜以后，每只眼睛实际上只能得到一半的光，因此主动式快门看出去，就好像戴了墨镜看电视一样，并且眼镜很容易疲劳。
编辑本段被动立体数字放映技术主要设备符合DCI技术规范的2K数字放映机×两台，支持主动立体放映的数字电影服务器×两台，偏振镜×两套，高增益金属银幕，普通偏振眼镜。
IL300ADCS中文资料
IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiersAudioData Converters AutomotiveDSP BroadbandClocks and Timers Digital ControlInterface MedicalLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyRF/IF and ZigBee®Solutions Video&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2008,Texas Instruments Incorporated元器件交易网。
奥维300W（室内型）发射机产品说明书
奥维300W（室内型）发射机产品说明书移动多媒体广播（CMMB）发射机产品说明书300W（室内型）发射机产品说明书300W（室内型）发射机AW603A-TSM55XX08奥维通信股份有限公司目录1.产品简介 (2)2.原理框图 (3)3模块介绍 (4)4.技术指标 (5)5.通用技术要求 (7)1.产品简介奥维300W发射机可适用于CMMB，DVB-T，ATSC以及DTMB 等多种标准，及应用于数字电视单频网（SFN）和多频网（MFN），具有单向放大数字电视下行链路信号的功能，可有效扩展数字信号覆盖的范围。
本款产品特点：●数字化的全固态功率放大电路设计技术；功放模块：采用的LDMOS晶体管BLF888A。
BLF888A是恩智浦半导体(NXP Semiconductors)推出的目前市场上功能最强大的LDMOS广播发射机晶体管，支持470-860MHz完整超高频带CMMB/DTMB/DVB-T信号，单管平均输出功率120W，效率可达31%以上。
21dB高增益、出色的线性度和耐用性（驻波比VSWR＞40:1）使BLF888A 成为CMMB/DTMB/DVB-T等高级数字发射机应用的理想选择。
●每个功放单元都集成自动电平控制（ALC）系统，确保功放单元输出功率稳定度优于±2%。
●采用单激励器配置，可根据客户需求和当地组网情况配置不同品牌激励器。
●可配置IP模块，使发射机具备IP转换功能。
●大功率高选择性的输出带通滤波器可安装于机柜内部。
大大节省安装空间●分配器和合成器采用宽带化设计，插损小，平衡性好。
●精确的监控系统，提供可靠的功放工作信息和适时的过热、过载、过激励和过流保护。
●提供实时监控和报警功能。
监控内容包括：设备工作状态、参数配置和接口工作状态等。
报警内容包括：数据输入数据异常、10MHz时钟输入信号异常、1pps时钟输入信号异常、TOD输入信号异常和设备故障等，发生异常情况时，给出报警指示。
CCL300DC3-DCP中文资料
test is available from 1 to 90 minutes.
Performance
Warranty Three year full electronics warranty
One year full plus four year prorated battery warranty
ቤተ መጻሕፍቲ ባይዱ
Input power requirements 120 VAC - 0.66 amps, 80 watts 277 VAC - 0.30 amps, 80 watts
.1
10
Down 20
0
10 20
30 40
50 60 70
80
Photometric No. 3
(For DK, suggested head for TCL)
Horizontal
Left 20
10 feet 0
1 .5 .3 .2
.1
10
Right 20 0
10 20 30
40 50 60 70
# OF HEADS 3 = Three 2 = Two 1 = One
12 Volt (Includes standard voltmeter) 150 = 150 Watt 200 = 200 Watt 300 = 300 Watt 450 = 450 Watt
12 Volt DNY = 12 Watt, Tungsten DE = 28 Watt, Tungsten DK = 25 Watt, Tungsten DG = 30 Watt, Tungsten
TD1 = 120 VAC Time Delay 3 TTD2 = 277 VAC Time Delay 3
VT300-D说明书
1.4 數位輸入........................................................................................... 18
1.5 數位輸出........................................................................................... 18
插圖目錄 ....................................................................................................VIII
法律聲明 .......................................................................................................IX
Main > MISC .................................................................................... 32
Main > SYSTEM ................................................................................ 32 Main > SYSTEM（續）........................................................................ 33
2.2 固定顯示器 ........................................................................................ 19 2.2.1 桌上型（鋁製機殼） ............................................................................. 19 2.2.2 壁掛式（不鏽鋼機殼） .......................................................................... 20
DSG300-中文版说明书
修订历史....................................................................................................................................... ii
禁止行为
接地
Pub. Date: Oct. 2007
Ver. 1.4
页 iii
Table of Contents
手册目录
DSG300 Operation Manual
版权说明........................................................................................................................................ i
Pub. Date: Oct. 2007
Ver. 1.4
页i
Revision History
修订历史
DSG300 Operation Manual
Version 1.0.0 1.1.0 1.2.0
1.3.0
1.4
Date 2007. 3.20 2007. 5.23 2007. 6.20
2007. 8
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright law.
变压器单元D3及D类型商品简介说明书
D3RETROFIT TERMINAL UNITSDRound Duct External Retrofit Terminal UnitConver t existing constant volume systems or old "system power ed" mechanical r egulator ter minals to ener gy efficient variable volume operation.• Available in 10 sizes to suit and install simply in ound ductwork. 0 – 4050 cfm (0 – 1911 l/s).• Va ious configu ations custom fab icated to suit individual applications.• Pressure dependent or independent airflow control.• Diamond Flow multi-point aver aging flow sensor on pr essur e independent models.• Digital, electric, analog electronic or pneumatic control.Model 36VRR See page D5Rectangular Slide-in Retrofit Terminal UnitConvert existing constant volume systems to energy efficientvariable volume operation.• Available in 15 valve sizes to handle a large range of air volumes. 0 – 15000 cfm (0 – 7079 l/s).• Custom fab icated to suit any duct size f om 5" x 5" (127 x 127) up to 52" x 26" (1321 x 660).• Diamond Flow multi-point averaging sensor.• Pressure independent airflow control.• Digital, analog electronic or pneumatic control.Model 36VRSSee Page D10GENERAL PRODUCT OVERVIEWInternal Retrofit Terminal UnitsDesigned to replace the mechanical regulators in old systempower ed ter minal units in or der to substantially lower the ope r ational static p r essu r e r equi r ement. The ai r valves include a damper , flow sensor and actuator and make use of state-of-the-art controls in order to reduce operating cost.• Custom built on a specific project basis.• Variable or constant volume pressure independent airflow control.• Diamond Flow multi-point averaging flow sensor.• Models available to r etr ofit most br and name mechanical regulator design terminal units.• Digital, analog electronic or pneumatic control.Model 36VRTR Contact your Nailor Sales Rep.Retrofit Terminal Units• Convert Constant Air Volume Systems to Variable Air Volume.• Convert Constant Volume Dual Duct Systems to Variable Air Volume.• Convert Multizone Systems to Variable Air Volume.• Convert Mechanical Constant Volume Regulators to Low Pressure Digital, Analog Electronic or Pneumatic Controls.Nailor manufactures a range of standard and custom design retrofit terminal units for all applications.Model 36VRRModel 36VRS Model 36VRTRModel 36VRSD4R E T R O F I T T E R M I N A L U N I T SConstant Volume Reheat SystemCold ai f om the cent al station is dist ibuted th ough the existing main t unk and b anch ducts. The Model 36VRS Retrofit Terminals will convert the constant volume system to pressure independent variable air volume operation.Each 36VRS te r minal is signaled by a di r ect acting the r mostat. The p r essu r e independent minimum ai r flow is set at a thermostat output pressure of 8 psi or less, while the maximum is set at 13 psi or greater.The existing reheat coil in each zone is actuated on a fall in room temperature, as the thermostat output decreases from 8 to 3 psi.The fan capacity must be reduced since the total air volume is reduced.Multizone SystemHot or cold air from the central station multizone air handler is distributed through the existing zone system. The Series 36VR Retrofit Terminals will convert the multizone system to variable air volume operation.The zone damper s in the centr al station air handler ar e made with two-position actuator s; each zone is fully open, either heating or cooling. There is no mixing. (Controls may be selected for an outdoor thermostat, a manual selector or changeover signal.)A dual function ther mostat in each zone is dir ect acting for cooling, r ever se acting for heating. In r esponse to the r oom temper atur e, the ther mostat r esets the velocity contr oller for pressure independent control of the Series 36VR .The fan capacity may be reduced since the total air volume is reduced.Some Typical Applications for the Model Series 36VR Retrofit Terminal UnitsDual Duct SystemHot and cold air from the central station is distributed through the existing supply ducts and terminals. The Series 36VR Retrofit Terminals will convert the constant volume system to variable air volume pressure independent operation.Remove the mechanical constant volume regulator from the existing ter minal, while a Model 36VRS is installed in the dischar ge box or duct. A dir ect acting ther mostat contr ols both the 36VRS unit and the modulating tandem damper in the existing box. On a rise in room temperature, the 36VRS reduces the hot airflow. At the minimum setting, the damper in the existing terminal begins to modulate, and mixing occurs. A fur ther temper atur e r ise incr eases the cold air flow to the maximum.The fan capacity may be r educed down since the total air volume is reduced.D5RETROFIT TERMINAL UNITSDModel 36VRR is designed for r ound ductwor k r etr ofit application. Ter minals ar e available in 10 sizes and ar e nominally undersized to ensure a good fit.Easy, low-cost installation into existing ductwor k. The installer cuts out a section in the round duct and replaces the duct section with the conversion unit.STANDARD FEATURES:• Casing 22 ga. (0.86), corrosion-resistant steel with stiffening beads. Sizes 14 and 16 are 20 ga. (1.0).• Blade: Two layers of 22 ga. (0.86), cor osion-r esistant steel laminated together (equivalent to 16 gauge) with across-linked polyurethane peripheral gasket for tight shut-off, 90° rotation, CW to close. Damper leakage is less than 1% of terminal rated airflow 3” w.g. (750 Pa) as tested in accordance with ANSI/ASHRAE Standard 130.• Bearing: Self-lubricating oilite bronze and less than 2% at 6” w.g. (1500 Pa).• Drive Shaft/Axles: 1/2” (13) diameter plated steel, double-bolted to blades. Indicator mark on the end of the shaft to show damper position.• Full electrical controls enclosure for factory mounted DDC and analog electronic controls.• Multi-point aver aging ‘Diamond Flow’ sensor . Aluminum constr uction. Gauge taps ar e pr ovided for field balancing when controls are factory mounted.• Right-hand contr ol location is standar d (as shown). Left-hand is optional.Options:• FMI Removable Flow Sensor• Available in Type 304 and 316 stainless steel construction for laboratory/fume hood exhaust applications.• Controls enclosure for field mounted controls.• 24 volt control transformer. • Toggle disconnect switch.• Pneumatic o Analog Elect onic P essu e Independent controls by Nailor. Factory mounted and calibrated.• Digital contr ols by BMS Contr actor. Factor y mounted byNailor.FACTORY MOUNTED CONTROLSD6R E T R O F I T T E R M I N A L U N I T S4GEQOOGPFGF #KTƀQY 4CPIGU (QT /QFGN 844 4QWPF 4GVTQſV 6GTOKPCN 7PKVUThe r ecommended ai r flow r anges below a r e fo r Round Duct Ret ofit Te minal Units with p essu e independent cont ols and ar e pr esented as r anges for total and contr oller specific minimum and maximum airflow. Airflow ranges are based upon maintaining reasonable sound levels and controller limits using Nailor’s Diamond Flow Sensor as the air flow measur ing device. For a given unit size, the minimum, auxiliar y minimum (wher e applicable) and the maximum flow setting must be within the r ange limits to ensur e pressure independent operation, accuracy and repeatability. Minimum airflow limits are based upon .02" w.g. (5 Pa) differential p r essu r e signal f r om Diamond Flow Senso r on analog/digital contr ols and .03" (7.5) for pneumatic contr ollers. This is a realistic low limit for many transducers used in the digital controls industry. Check with your controls supplier for minimum limits. Setting airflow minimums lower , may cause hunting and failur e to meet minimum ventilation requirements. Factory settings will therefore not be made outside these r anges. A minimum setting of zer o (shut-off) is also available. Where an auxiliary setting is specified, the value must be greater than the minimum setting.The high end of the tabulated Total Airflow Range on pneumatic and analog electr onic contr ols r epr esents the Diamond Flow Sensor ’s differential pressure reading at 1" w.g. (250 Pa). The high end airflow range for digital controls is represented by the indicated transducer differential pressure.ASHRAE 130 "Per for mance Rating of Air Ter minals" is the method of test for the cer tification pr ogr am. The "standar d r ating condition" (certification rating point) airflow volumes for each terminal unit primary valve size ar e tabulated below per AHRI Standar d 880. These air volumes equate to an approximate inlet velocity of 2000 fpm (10.2 m/s).When digital or other controls are mounted by Nailor, but supplied by others, these values are guidelines only, based upon experience with the majority of controls currently available. Controls supplied by others for factory mounting are configured and calibrated in the field. Airflow settings on pneumatic and analog controls supplied by Nailor are factory preset when provided.Model 36VRRImperial Units, Cubic Feet per MinuteMetric Units, Liters per SecondD7RETROFIT TERMINAL UNITSDPerformance Data • NC Level Application GuideModel 36VRRPerformance Notes:1. NC levels ar e calculated fr om thepublished r aw data and based on pr ocedur es outlined in AHRI Standar d 885, Appendix E. 2. Discha r ge sound attenuation deductions are based on environmental effect, duct lining, br anch power division, insulated flex duct, end r eflection and space effect and are as follows:3. Radiated sound attenuation deductions are based on a mineral tile ceiling and envi onmental effect and are as follows:0LQ LQOHW ¨3V LV WKH PLQLPXP VWDWLF p r essu r e r equi r ed to achieve r ated airflow (damper full open).5. Dash (–) in space denotes an NC level of less than 20.Discharge attenuation Octave Band234567< 300 cfm 242839535940300 – 700 cfm 272940515339> 700 cfm293041515239Radiation attenuationOctave Band 234567Total dB reduction181920263136D8R E T R O F I T T E R M I N A L U N I T SPerformance Notes:1. Discharge sound power is the noise emitted from the unit discharge into the downstream duct.2. Sound power levels are in decibels, dB re 10-12 watts.3. All sound data listed by octave bands is raw data without any corrections for room absorption or duct attenuation.4. Min. inlet ţPs is the minimum ope r ating p r essu r e r equi r ement (damper full open).5. Data der ived fr om tests conducted in acco r dance with ANSI/ASHRAEStandard 130 and AHRI Standard 880.RETROFIT TERMINAL UNITS D Performance Notes:1. Radiated sound powe r is the breakout noise transmitted through the unit casing walls.2. Sound power levels are in decibels, dB re 10-12 watts.3. All sound data listed by octave bandsis raw data without any corrections forroom absorption or duct attenuation.4. Min. inlet ţPs is the minimumope r ating p r essu r e r equi r ement(damper full open).5. Data der ived fr om tests conductedin acco r dance with ANSI/ASHRAEStandard 130 and AHRI Standard 880.D9D10R E T R O F I T T E R M I N A L U N I T SSTANDARD FEATURES:• Damper: 16 ga. (1.6) galvanized steel blade and frame construction with extruded PVC blade seals and metallic side jamb seals. Leakage is less than 2% of nominal *******"w.g.(746Pa)astestedinaccordancewith ASHRAE Standard 130.• Bea r ings: Celcon ®.• Dr ive Shaft: 1/2" (13) dia. plated steel, double-bolted to blade. Indicator mar k on the end of the shaft to show damper position. 90o rotation. CW to close.• Full electrical controls enclosure for factory mounted DDC and analog electronic controls.• Multi-point ave r aging ‘Diamond Flow’ senso r : Aluminum. Gauge taps ar e pr ovided for field balancing when controls are factory mounted.• Gasket under the mounting plate and around periphery of terminal insert seal the unit to the sides of the duct.Options:• Controls enclosure for field mounted controls.• 24 volt control transformer. • Toggle disconnect switch.• Pneumatic o r Analog Elect r onic P r essu r e Independent controls by Nailor. Factory mounted and calibrated.• Digital contr ols by BMS Contr actor. Factor y mounted by Nailor.A slide-in type Retrofit Air Terminal Unit forsquar e or r ectangular ductwor k. Conver ts constant volume systems to var iable air volume. Available in 15 individual valve sizes up to 15,000 cfm (7079 l/s). Nominal valve size is the same as smallest available duct size in table. Each unit (valve) size is available to suit var ious duct sizes asshown in the table. Top, bottom and/or side blank-off plates ar e used to br ing valve up to the r equir ed nominal ductwor k dimension. Airflow ranges are based on valve size and acoustical considerations for duct velocity. Model 36VRS is available to suit duct sizes within the tabulated range in 1" (25) increments.Simple, low cost installation into existing ductwork. The installer cuts a rectangular hole in the side of the duct, cuts away the insulation (where present), slides the unit into the duct and screws the mounting plate to the side of the duct.Dimensional Data:D11RETROFIT TERMINAL UNITSDRecommended Airflow RangesFor Model 36VRS Slide-in Retrofit Terminal UnitsThe r ecommended air flow r anges below ar e for ter minal units with pressure independent controls and are based upon controller sensitivity limits as shown for each control type and acoustical consideration for duct velocity. For a given unit size, the minimum, auxiliar y minimum (wher e applicable) and the maximum flow settings must be within the r ange limits to ensur e pr essur e independent oper ation, accur acy and repeatability. For these reasons, factory settings will not be made outside these r anges. A minimum setting of zer o (shut-off) is also available. Wher e an auxiliar y setting is specified, the value must be greater than the minimum setting.When digital or other controls are mounted by Nailor, but supplied by others, these values are guidelines only, based upon experience with the majority of controls currently available. Controls supplied by others for factory mounting are configured and calibrated in the field.Model 36VRSModel 36VRS Square or RectangularD12R E T R O F I T T E R M I N A L U N I T SPerformance Data • NC Level Application GuideModel 36VRSFor full performance table notes, see page D7.D13RETROFIT TERMINAL UNITSDPerformance Data • NC Level Application GuideModel 36VRSFor full performance table notes, see page D7.D14R E T R O F I T T E R M I N A L U N I T SSTANDARD FEATURES:• 22 ga. (0.86) corrosion-resistant steel casing with stiffening beads and corrosion-resistant steel blade up to 12" (305) dia., 20 ga. (1.00) over 12" (305) dia.• Sized to fit nominal round duct sizes.• Inlet and outlet stiffening beads p ovide a means fo secure flexible duct connection.• Balancing damper with hand locking quadrant.• Multi-point aver aging Diamond Flow Sensor : Aluminum construction.• Sensor design minimizes pressure drop and regenerated noise.The Model 36FMSD Flow Measuring Station is a multi-point aver aging air flow sensor combined with integr al balancing damper. The 36FMSD allows the field balancer to measure and adjust the airflow to a diffuser or other air terminal device located downstream.The 36FMSD is an especially useful option for balancing individual displacement ventilation diffusers.A chart is provided on the unit which gives airflow vs. signal differential pressure for direct reading of airflow.Dimensional Data – 36MSFD。
ATD现场培训资料300 TD-350ATD和650
热脱附仪TurboMatrix Series 300 TD,350ATD和650 ATD培训资料系统设置SYSTEM SETUP过程包括PPC模块的配置和初始压力或流量的设定。
此过程自动完成。
触摸屏下面的状态栏中会显示SYSTEM SETUP（见下图）。
在仪器的启动过程中，不要改变任何参数，包括方法、配置、方法下载或远程控制软件的设置等，直到仪器成功完成SYSTEM SETUP过程为止。
如果SYSTEM SETUP过程失败，必须要重启仪器。
导致失败的原因通常是载气中断。
Run标签创建了用于分析样品的方法后，可以在Run标签下手动装载单支吸附管或自动装载吸附管转盘。
详细参见第5章的创建方法部分。
可以使用已保存的方法或序列来运行样品。
图34 Run标签Run标签上的选项由Preferences标签中的设置决定。
单方法操作为方便日常分析，方法操作只需输入吸附管范围。
在Preferences标签上可选定Single Method Operation，并选定要使用的方法。
见P117 Preferences Tab。
1．如果单方法操作中已预选了要使用的方法，则只需在这里输入吸附管的范围。
选择的方法会在方法栏中显示，不能再点击方法文件名的下拉菜单。
2．点击Tubes按钮，输入开始和结束的管号。
默认管号范围为1～50。
点击第一个输入框激活管号范围选项。
如果使用的是TD，管号范围固定为1。
3．点击“＋”和“－“按钮调整开始和结束分析的管号。
4．从方法文件名的下拉菜单处选择希望用于该范围吸附管的方法。
5．Start按钮呈绿色，提示ATD/TD和GC均处于就绪状态，点击Start按钮，开始运行分析。
ATD/TD会跟据显示在Status标签中的参数信息实现自我调节。
仪器状态显示―Equalizing‖直到所有参数达到设定值。
一旦参数满足设定，一支吸附管即被装载，分析开始按照方法设定进行。
创建一个序列在ATD上可以运行一个序列来对一系列吸附管进行分析。
ADT300(1.5KW以上)
z
当变频器和电机之间的电缆长度超过 100 米时，建议使用输出电抗
器，以避免过大的分布电容产生的过电流导致变频器故障。
运行
z z z z
危险
变频器配线完成并装上盖板后，方可通电，带电状态下严禁拆下盖 板，否则有触电的危险。 当设置了故障自动复位或停电后再启动功能时，应对机械设备采取 安全隔离措施，否则可能造成人员伤害。 变频器接通电源后，即使处于停机状态，变频器的端子上仍带电， 不能触摸，否则可能造成触电。 在确认运行命令被切断后，才可以复位故障和告警信号，否则可能 造成人员伤害。
维修、检查
危险
z
在通电状态，请勿触摸变频器的端子，否则有触电的危险。
z
如果要拆卸盖板，请务必断电。
z
断电后至少等待 10 分钟才能进行保养和检查，以防止主回路电解电
容的残余电压造成人员伤害。
z
请指定合格的电气工程人员进行保养、检查或更换部件。
注意
z
线路板上有 CMOS 大规模集成电路，请勿用手触摸，以防静电损坏
前言
首先感谢您选用深圳市澳地特电气技术有限公司的 AD300 系列变频器！
AD300 系列变频器是高性能矢量控制型变频器。产品采用 了与目前国际最领先技术完全同步的无速度传感器矢量控制技 术，结合国内的应用环境，强化了产品的可靠性设计，能够更 好地满足各种传动应用的需求。
本手册为用户提供安装配线、参数设定、日常维护、故障 诊断和排除方法等内容。安装、设置、运行和维护变频器之前， 请务必详细阅读本产品用户手册的全部内容，熟记变频器的有 关知识、安全注意事项，确保正确使用并充分发挥其优越性能。
注意
z
三相电源不能接到输出端子 U、V、W，否则将造成变频器损坏。
清晰的力量 亮彩的魅力
清晰的力量亮彩的魅力目前，大屏幕显示设备得到了众多消费者追捧，这也带动了液晶电视与等离子电视的不断发展与进步。
液晶电视以重量轻、体积小、耗电量小且屏幕分辨率较高，在最近几年的时间里得到了广大厂商和消费者的青睐，这也使得液晶电视在技术有了长足的发展和进步，并且使液晶电视画面响应速度慢和视角太小这两个缺点得到了改善与进步。
到目前大多数液晶电视显示屏幕的响应速度都可以达到16ms左右，另外，画面残影和拖尾的问题也得到了全面的改善与解决。
现在各个生产厂家也在不遗余力往画面更大、画质更好、价格更低等方向进行努力。
TCL一直是全球电视生产的大户，本年度自然将继续发挥市场拓展、研发以及制造等方面的协同效应，提升自身竞争力。
其中最重要的一步就是近期推出的10余款新品，薄典BO3液晶电视系列便是其中的代表作，而笔者将向读者推介的这款LCD37B03-P更是薄典BO3液晶电视系列的主打产品。
导言：薄典BO3液晶电视LCD37B03-P是时下最流行和兼容数字电视的16：9外观以及黑色亚克力边框，以及白色外观设计，这大大降低了亚克力边框反光的可能，而且使屏幕看上去比实际尺寸显得更大......外观篇薄典BO3液晶电视LCD37B03-P采用动感“飞翼”造型，突显悬浮屏结构，整台电视看上去时尚典雅，与众不同。
屏幕方面薄典BO3液晶电视LCD37B03-P为时下最流行和兼容数字电视的16：9外观以及黑色亚克力边框，不过比较别致的是其采用了白色外观设计，这不仅与一般液晶电视普遍采用的银灰色外观有了明显区别，而且还大大降低了亚克力边框反光的可能，还使屏幕看上去比实际尺寸显得更大。
为了使整个前面板保持简约美，其设计者将其全部的功能按键，都集中设置在屏幕的右下部，其中包括音量选择、频道选择、菜单调整等。
值得一提的是，薄典BO3液晶电视LCD37B03-P的电源开关被设计在了屏幕的右侧下方，而且标识隐藏得很巧妙，这恐怕会让那些没有看过说明书的使用者感到些许不便吧。
鹏辉dl3使用说明
鹏辉dl3使用说明篇一：鹏辉 DL3 是一款功能强大的手持式激光切割机，适用于各种金属和非金属材料的切割和雕刻。
以下是鹏辉 DL3 的使用说明:1. 安装和配置在安装和配置鹏辉 DL3 之前，请确保已经安装了正确的驱动程序和软件。
用户可以从鹏辉 DL3 的官方网站下载并安装相应的软件。
在安装过程中，需要提供一些必要的信息，例如机器尺寸、切割宽度和厚度等。
2. 操作界面鹏辉 DL3 的操作界面非常直观，包括一个主屏幕和一个设置屏幕。
在主屏幕上，用户可以查看当前的切割设置、机器状态和工作进度。
在设置屏幕上，用户可以更改各种设置，例如切割速度、切割深度、激光器功率等。
3. 切割操作鹏辉 DL3 的切割操作非常简单。
首先，将需要切割的材料放置在工作台上，并确保它紧贴工作台。
然后，打开鹏辉 DL3 的激光器，并切换到切割模式。
最后，调整切割速度和深度，并根据需要设置其他参数。
4. 雕刻操作鹏辉 DL3 也适用于雕刻操作。
与切割操作类似，用户需要将材料放置在工作台上，并确保它紧贴工作台。
然后，打开激光器，并切换到雕刻模式。
最后，调整雕刻速度和深度，并根据需要设置其他参数。
5. 维护和保养为了确保鹏辉 DL3 的正常运行，需要定期维护和保养机器。
例如，定期清洁激光器、切割头和工作台，并检查机器是否正常工作。
如果机器出现故障，请及时联系售后服务人员。
鹏辉 DL3 是一款高性能的手持式激光切割机，适用于各种金属和非金属材料的切割和雕刻。
用户可以快速、简单地使用鹏辉 DL3 进行切割和雕刻操作，并且可以定期维护和保养机器，确保它的正常运行。
篇二：鹏辉 DL3 是一款高性能、高可靠性的分布式存储系统，主要用于存储大规模数据集。
以下是鹏辉 DL3 的使用说明:1. 安装鹏辉 DL3要使用鹏辉 DL3，需要先安装操作系统。
可以选择使用 Linux、Windows 等操作系统。
安装过程可以参考鹏辉 DL3 的官方文档。
2. 配置鹏辉 DL3在安装完鹏辉 DL3 后，需要对其进行配置。
LD300电子负载产品说明书
LD300THANDAR INSTRUMENTSLD300DC Electronic Load, 80A, 80V, 300Wconstant current, resistance, voltage and powertransient generator, variable slew rate, soft startcurrent monitor output, analogue remote controlLD300 Electronic DC Load80 amps, 80 volts, 300 wattsCompact electronic DC loadThe LD300is an inexpensive electronic load which is suitable for testing and characterising a wide variety of dc power sources.It can be used to investigate the behaviour of many different types of power source such as batteries,solar cells,fuel cells or wind genera-tors, as well as electronic power supply units.Its wide voltage/current range,multiple operating modes and built-in transient generator give it the versatility to offer test solutions from the design laboratory through to the component test area.Low minimum operating voltageThe LD300can operate at voltages below 500mV for currents up to 10amps.At higher currents the fixed internal resistance of 25m W gradually raises the minimum operating volt-age,but it remains below 1volt up to 40amps and below 2volts up to 80amps.This low operating voltage allows it to be used for many low voltage applications for which other electronic loads are unsuitable.uVersatile solution for testing dc power sourcesu Constant current, resistance, conductance, voltage and power modesu Wide voltage and current range, 0 to 80 volts and 0 to 80 amps.u 300 watts continuous dissipation at 40oCu Low minimum operating voltage of <1V at 40A u Ten turn controls for level settingu Built-in transient generator with variable slew u Current monitor output for waveform viewing u Variable drop-out voltage for battery testing uAnalogue remote control capabilityCI, CR, CG, CV and CP modestransient generator, variable slew rateConstantCurrentConstantResistanceConstantVoltageConstantPowerMultiple modes of operationConstant current mode is usedfor load testing of normal volt-age-source power suppliesand for constant current dis-charge testing of batteries.This mode provides rapid mea-surement of power source reg-ulation (V/I characteristics).Constant resistance modesimulates a standard resistiveload by providing a currentdrain proportional to voltage.Settings are displayed in Ohmsor milli-Ohms.Unlike fixed resistors or rheo-stats,the load provides a pre-cisely controllable resistancewith high power dissipationover a wide value range.ConstantConductanceConstant conductance(CG)mode is also incorporated.Aswell as showing settings inamps per volt,this mode pro-vides better resolution whensetting very low equivalent re-sistance values.Constant voltage mode is usedfor load testing of constant cur-rent power supplies.The unitoperates as a high power shuntregulator.Constant power mode simu-lates a load whose power con-sumption is independant of theapplied voltage.This is true ofmany types of equipment thatincoporate switchmode regula-tors.This mode may be particularlysuitable for testing powersources of portable devicessuch as Lithium-ion batteries.Transient generator and variable slewThe LD300incorporates a full variable frequency,variable dutycycle transient generator.Switching between the two preset levels can be done at any fre-quency between0.1Hz and10kHz.The transient generator can beused in all operating modes.The rate of change between levels(slew rate)is controllable over awide range.Slew rate control applies to all changes of level including remotecontrol and manual changes between level A and level B.A slow-start function can be selected for situations where latchingwould otherwise occur at switch-on.High resolution setting & measurementThe levels for each operating mode are set using high quality tenturn potentiometers for both level A and level B.Levels are displayed using four digit meters which provide resolu-tion down to 1mA, 1mV and 1m W.Settings for slew rate, transient frequency, duty cycle and drop-out voltage can also be displayed.In measurement mode the meters have an accuracy of0.1%forvoltage and 0.2% for current.Remote controlThe LD300incorporates analogue remote control for all modes ofoperation.When"external voltage"is selected the level becomeslinearly proportional to the voltage applied to the remote control in-puts on the rear panel.Any waveform can be used as the control voltage allowing com-plex load conditions to be simulated using,for example,an arbi-trary waveform generator.Alternatively,a logic signal can be used to switch between levels.When"external TTL"is selected,the level is switched between thetwo preset levels in response to an external logic signal.The remote control inputs have a wide common mode range al-lowing the control voltage to be referenced independently of theload terminal voltages.Current waveform monitorIt is often important to be able to observe the load current wave-form on an oscilloscope.The LD300provides a calibrated monitoroutput for this purpose as well as a sync output from the transientgenerator.The monitor output has several volts of compliance with respect tothe load input,thus allowing it to be connected to a grounded oscil-loscope without current divertion.Adjustable voltagedrop-outSome power sources,such asrechargeable batteries,can bedamaged if their output voltagefalls below a certain level.The LD300provides automaticprotection by incoproratingfully variable voltage dropout(CI, CR, CG and CP modes).If the voltage applied to theload falls below a preset level,the load current is rapidly re-duced to zero.Resistive discharge(conductance mode)with voltage dropout.Note that in CR modethe load performs theequation I=(V-Vd)/Rwhere Vd is the drop-outvoltage.Technical SpecificationsDesigned and built in Europe by:Accuracy specifications apply for 18o C to 28o C and 50W power.Thurlby Thandar Instruments Ltd. operates a policy of continuous development andreserves the right to alter specifications without prior notice.Thurlby Thandar Instruments Ltd .Glebe Road,Huntingdon.Cambs.PE297DR United Kingdom (UK)Tel:+44(0)1480412451Fax:+44(0)1480450409Email:***************Web:RATINGSVoltage and Current:80volts maximum,80amps maximum.Power Dissipation:320watts maximum continuous at 28o C.Derating to 300watts continuous at 40o C.Min. Operating Volts:Increases with current,<0.5V at 10A,<1V at 40A,<2V at 80A.OPERATING MODESConstant Current ModeSetting Range:0to 80A in 2ranges,set by 10turn control.Meter Resolution:1mA on 8A range,10mA on 80A range.Setting Accuracy:±(0.2%+20mA).Regulation:<30mA for a 20W to 280W power change.Slew Rate Range:<8mA/ms to >2500A/msConstant Resistance ModeSetting Range:0.04W to 100W in 2ranges,set by 10turn control.Meter Resolution:10m W on 10W range,100m W on 400W range.Setting Accuracy:±(0.5%+2digits).Regulation:<2%for a 20W to 280W power change.Slew Rate Range:<3.3W /s to >4000W /msConstant Conductance ModeSetting Range:0.01A/V to 40A/V in 2ranges,set by 10turn control.Meter Resolution:0.001A/V or 0.01A/V depending on range.Setting Accuracy:±(0.5%+2digits).Regulation:<2%for a 20W to 280W power change.Slew Rate Range:<33mA/V/s to >400A/V/msConstant Voltage ModeSetting Range:Vmin to 80V in 2ranges,set by 10turn control.Vmin varies with current -see Ratings.Meter Resolution:1mV on 8V range,10mV on 80V range.Setting Accuracy:±(0.2%+2digits).Regulation:<30mV for a 20W to 280W power change.Slew Rate Range:<2.5V/s to >800V/msConstant Power ModeSetting Range:0to 320W,set by 10turn control.Meter Resolution:1W.Setting Accuracy:±(0.5%+2W).Regulation:<2%for a 20W to 280W power change.Slew Rate Range:<0.1W/ms to >3,200W/msLEVEL CONTROLControl Modes:Level A, Level B, Transient Internal (switching between A and B using the built-in generator), Transient External (switching between A and B using an external switching signal), and Remote (level proportional to an external voltage).Level A, Level B:Each set by 10-turn potentiometer. Range, resolution and setting accuracy as shown above.Slew Rate ControlAll changes of level are subjected to slew rate control which is adjustable over a 30,000:1 range by a 3 position switch and vernier.Input EnableLatching switch which turns the load condition on.Slow StartEngages slew rate control to limit the speed of the ON transition when the input is enabled.Dropout VoltageDefines a minimum voltage below which the load current will reduce to zero (as may be required for testing batteries or power sources that can not be short circuited). Adjustable from 0V to 80V.TRANSIENT GENERATORPulse Repetition Rate:0.1Hz to 10kHz in 3overlapping ranges.Setting Resolution:0.1Hz,1Hz,10Hz depending on range.Setting Accuracy:±2%of range.Pulse Duty Cycle:1%to 99%continuously variable.Sync Output:Pulse synchronous with transient level change.DISPLAYS and METERINGDual 4 digit LED displays showing a variety of settings or measurements as set by a five position switch.Setting Displays:Level A and Level B,Frequency and Duty Cycle,Slew Rate and Drop Out.Measurements:Amps and Volts,Watts and Ohms (calculated from Vand I measurements).Meter Accuracy:Voltage ±(0.1%+2digits),Current ±(0.2%+20mA).REMOTE VOLTAGE SENSERemote or Local voltage sensing can be selected via a rear panel switch.Sense connections are on the rear panel terminal block.Input Impedance:680k W (each input)to load negative.Max. Voltage Drop:6volts.REMOTE CONTROLAnalogue - the level for any mode can be set by an external analogue volt-age (4V full scale).TTL - the change between the Level A and Level B settings for any mode can be done in response to an external logic signal.The inputs for analogue or TTL have an impedance of 400k W to the power negative terminal and a common mode range of ±100V.Remote Disable - when the front panel input enable switch is in the on po-sition, this input can be used to turn the load on or off in response to an ex-ternal logic signal. Fully opto isolated input.CURRENT MONITORAn analogue signal representing the current waveform is available for con-nection to an oscilloscope or external meter. Scaling is 50mV/Amp and compliance is ±3V with respect to the load negative terminal.PROTECTIONThe load incorporates both a power limiter circuit and a fault trip which re-sponds to excess voltage, current, power or temperature. The trip puts the load into a high impedance state. Surge suppessors are incorporated to limit transient voltage spikes.GENERALRear Terminals:Input via 6mm terminal/binding posts.Remote sense,current monitor,remote control via terminal block.Front Terminals:Input via 4mm terminal/binding posts (30A max.).Current monitor via 4mm sockets.Power Requirement:220V -240V or 110V -120V ±10%,50/60Hz.Installation Category II.Consumption 30VA max.Operating Range:+5o C to +40o C,20%to 80%RH.Storage Range:-40o C to +70o C.Environmental:Indoor use at altitudes up to 2000m.Pollution degree 2.Safety and EMC:Complies with EN61010-1and EN61326.Size:130x 212x 435mm [HxWxD],(3U x half rack).Weight:6kg.Option:19-inch rack mount kit.82100-0094 Iss. 1AThurlby Thandar Instruments Ltd.Glebe Road, Huntingdon, Cambridgeshire PE29 7DR England (United Kingdom)Tel: +44 (0)1480 412451 Fax: +44 (0)1480 450409Email:***************Web: www Designed and built in Europe by:Company name and product brandsThurlby Thandar Instruments Ltd. (TTi) is one of Europe’s leading manufacturers of test and measurement instruments. Products have been sold under two brand names: TTi and Aim.In the future, however, the full product range will be branded Aim-TTi.This changeover will be gradual and many products will continue to carry the TTi or Aim brands for some time to come.Web Addresses (URLs)The preferred URL for obtaining information concerning Aim-TTi products is: (international customers)Customers in the UK should use the URL: Customers in the USA should use the URL: Note that previous URLs such as will continue to operate for the time being.Product SummaryLaboratory Power SuppliesBench and system power supplies from 30 watts up to 1200 watts using linear, mixed-mode and PowerFlex regulation technologies.Waveform GeneratorsAnalog and digital (DDS) function generators, true arbitrary generators, arbitrary/function generators and pulse generators.Precision Measurement InstrumentsBenchtop DMMs, frequency counters, component measurement instruments (LCR), electronic dc loads, current probes.RF and EMC Test EquipmentSpectrum analyzers, signal generators, frequency counters, power meters, emc measurement instruments.LD300。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
ACCESSORIES
LMSHELF = Mounting Shelf 300-450W MXSHELF = Mounting Shelf 72-200W
Ordering Information
SERIES DC WATTAGE HEADS HEADS OPTIONS 1CCL = 6 Volt 6 Volt
6 Volt
3 = Three A = Ammeter 2
TCL = 12 Volt
75 = 75 Watts DY = 8 Watt, Tungsten 2 = Two ACF1 = 120 VAC Fuse 100 = 100 Watts DA = 18 Watt, Tungsten 1 = One
ACF2 = 277 VAC Fuse 150 = 150 Watts DL = 25 Watt, Tungsten ACP1 = 120 VAC Power Switch 225 = 225 Watts
DC = 30 Watt, Tungsten ACP2 = 277 VAC Power Switch AD = ACCU-TEST Self-Diagnostics 12 Volt (Includes standard voltmeter)12 Volt
ADAL = ACCU-TEST with Alarm
150 = 150 Watt DNY = 12 Watt, Tungsten ADTD = ACCU-TEST with Time Delay 3200 = 200 Watt DE = 28 Watt, Tungsten DCP = DC Power Switch
300 = 300 Watt DK = 25 Watt, Tungsten EX = Special Input Transformer (Specify voltage and frequency)450 = 450 Watt
DG = 30 Watt, Tungsten
TD1 = 120 VAC Time Delay 3TTD2 = 277 VAC Time Delay 3(Suggested lamp heads listed
V = Voltmeter 2
above. Refer to the Accessories Section for W = White Housing
additional lamp head choices.)
CCL
150
16.0”
(40.6 cm)
TCL300, TCL450
6.0”
(15.2 cm)
7.6”
(19.3 cm)
12.0”
(30.5 cm)
27.0”
(12.7 cm)
6.0”
(15.2 cm)
7.6”
(19.3 cm)
12.0”
(30.5 cm)
Notes:
1) Some option combinations may impact UL list-ing. consult factory for specifics.
2) Not available witj AD, ADAL, or ADTD options.3) 15 minute delay.
元器件交易网
Housing
18 gauge steel housing with a tan epoxy powder coat finish.
Knockouts provided for mounting up to three lamp heads.
The suggested lamp head is the “D” Series round sealed beam Par 36 tungsten. To order lamp heads other than the suggested “D” head, refer to Chloride Accessories Section..
Suggested Specification
Furnish and install Chloride Systems emergency lighting unit model ________. The unit shall be constructed to meet Underwriter’s Laboratories, Inc. Standard #924
and the National Electrical Code (NEC).
INSTALLATION AND OPERATION -Unit shall be easily field connected to a 120 or 277 VAC, 60 hertz, unswitched power source. Installation must comply with the NEC as well as other applicable codes. Upon utility power failure or brownout, the unit shall automatically transfer to battery power and maintain the required illumina-tion level for a minimum period of 90 minutes. Upon restoration of utility power, the charger shall restore the battery to full charge within UL 924 requirements follow-ing a rated discharge of not more than 90 minutes.
CHARGER -Product shall utilize a fully automatic, voltage regulated, two-rate current limited solid-state charger. The charging system shall maintain the battery at full capacity without the need for periodic exercising or equalization. The following features shall be standard: Low voltage disconnect (LVD), brownout protection and AC lockout.
BATTERY -The battery shall be a low maintenance, free electrolyte, wet cell, lead calcium battery. The lead calcium battery shall provide trouble-free operation in temperatures up to 85°F (30°C).
HOUSING -The unit housing shall be constructed of 18 gauge steel with a tan epoxy powder coat finish.
Chloride Systems
ISO
8C1063R49/02 IH
272 West Stag Park Service Road •Burgaw NC 28425Telephone: (910) 259 1000 •Facsimile: (800) 258
Lamp Head Photometrics
(For DL, suggested head for CCL)
(For DK, suggested head for TCL)
Vertical
203050100Up 20
10
feet 0
10
Down 20
.2
.1
406070
.3
1
.5
Horizontal
203050100Left 20
10
feet 0
10
Right 20
.2
.1
4060
70
.3
1
.5
203050100Up 20
10
feet 0
10
Down 20
Photometric No. 3
40607080
1
.3
.2
.1
.5
Horizontal
203050100Left 30
10
feet 0
10
20
Right 30
1
.3
.2
.1
20
.5
40607080。